6 files changed, 95 insertions, 6 deletions
diff --git a/arch/m68knommu/platform/520x/Makefile b/arch/m68knommu/platform/520x/Makefile
new file mode 100644
index 00000000000..e861b05106b
--- /dev/null
+++ b/arch/m68knommu/platform/520x/Makefile
@@ -0,0 +1,19 @@
+#
+# Makefile for the M5208 specific file.
+#
+
+#
+# If you want to play with the HW breakpoints then you will
+# need to add define this,  which will give you a stack backtrace
+# on the console port whenever a DBG interrupt occurs.  You have to
+# set up you HW breakpoints to trigger a DBG interrupt:
+#
+# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT
+# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
+#
+
+ifdef CONFIG_FULLDEBUG
+AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
+endif
+
+obj-y := config.o
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c
new file mode 100644
index 00000000000..71dea2e0f45
--- /dev/null
+++ b/arch/m68knommu/platform/520x/config.c
@@ -0,0 +1,65 @@
+/***************************************************************************/
+
+/*
+ *  linux/arch/m68knommu/platform/520x/config.c
+ *
+ *  Copyright (C) 2005,      Freescale (www.freescale.com)
+ *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
+ *  Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+
+/***************************************************************************/
+
+/*
+ *	DMA channel base address table.
+ */
+unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+/***************************************************************************/
+
+void coldfire_pit_tick(void);
+void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+unsigned long coldfire_pit_offset(void);
+void coldfire_trap_init(void);
+void coldfire_reset(void);
+
+/***************************************************************************/
+
+/*
+ *  Program the vector to be an auto-vectored.
+ */
+
+void mcf_autovector(unsigned int vec)
+{
+    /* Everything is auto-vectored on the 520x devices */
+}
+
+/***************************************************************************/
+
+void config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_BOOTPARAM
+    strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
+    commandp[size-1] = 0;
+#else
+    memset(commandp, 0, size);
+#endif
+
+    mach_sched_init = coldfire_pit_init;
+    mach_tick = coldfire_pit_tick;
+    mach_gettimeoffset = coldfire_pit_offset;
+    mach_trap_init = coldfire_trap_init;
+    mach_reset = coldfire_reset;
+}
+
+/***************************************************************************/
diff --git a/arch/m68knommu/platform/5307/Makefile b/arch/m68knommu/platform/5307/Makefile
index 6fe5a2b8fb0..8d1619dc1ea 100644
--- a/arch/m68knommu/platform/5307/Makefile
+++ b/arch/m68knommu/platform/5307/Makefile
@@ -19,6 +19,7 @@ endif
 obj-$(CONFIG_COLDFIRE)	+= entry.o vectors.o ints.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
+obj-$(CONFIG_M520x)	+= pit.o
 obj-$(CONFIG_M523x)	+= pit.o
 obj-$(CONFIG_M5249)	+= timers.o
 obj-$(CONFIG_M527x)     += pit.o
diff --git a/arch/m68knommu/platform/5307/head.S b/arch/m68knommu/platform/5307/head.S
index 7f4ba837901..c30c462b99b 100644
--- a/arch/m68knommu/platform/5307/head.S
+++ b/arch/m68knommu/platform/5307/head.S
@@ -113,6 +113,9 @@
 #define MEM_BASE	0x02000000
 #define VBR_BASE	0x20000000	/* vectors in SRAM */
 #endif
+#if defined(CONFIG_M5208EVB)
+#define MEM_BASE	0x40000000
+#endif
 
 #ifndef MEM_BASE
 #define	MEM_BASE	0x00000000	/* memory base at address 0 */
diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c
index 0117754d44f..a134fb2f056 100644
--- a/arch/m68knommu/platform/5307/ints.c
+++ b/arch/m68knommu/platform/5307/ints.c
@@ -26,6 +26,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/irqnode.h>
 #include <asm/traps.h>
 #include <asm/page.h>
 #include <asm/machdep.h>
diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c
index a9b2c2e7e28..323f2677e49 100644
--- a/arch/m68knommu/platform/5307/pit.c
+++ b/arch/m68knommu/platform/5307/pit.c
@@ -3,7 +3,7 @@
 /*
  *	pit.c -- Motorola ColdFire PIT timer. Currently this type of
  *	         hardware timer only exists in the Motorola ColdFire
- *		 5270/5271 and 5282 CPUs.
+ *		 5270/5271, 5282 and other CPUs.
  *
  *	Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
  *	Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
@@ -47,10 +47,10 @@ void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *))
 
 	icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
 		MCFINTC_ICR0 + MCFINT_PIT1);
-	*icrp = 0x2b; /* PIT1 with level 5, priority 3 */
+	*icrp = ICR_INTRCONF;
 
-	imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH);
-	*imrp &= ~(1 << (MCFINT_PIT1 - 32));
+	imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR);
+	*imrp &= ~MCFPIT_IMR_IBIT;
 
 	/* Set up PIT timer 1 as poll clock */
 	tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
@@ -70,7 +70,7 @@ unsigned long coldfire_pit_offset(void)
 	unsigned long pmr, pcntr, offset;
 
 	tp = (volatile struct mcfpit *) (MCF_IPSBAR + MCFPIT_BASE1);
-	ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IPRH);
+	ipr = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFPIT_IMR);
 
 	pmr = *(&tp->pmr);
 	pcntr = *(&tp->pcntr);
@@ -80,7 +80,7 @@ unsigned long coldfire_pit_offset(void)
 	 * timer interupt is pending, then add on a ticks worth of time.
 	 */
 	offset = ((pmr - pcntr) * (1000000 / HZ)) / pmr;
-	if ((offset < (1000000 / HZ / 2)) && (*ipr & (1 << (MCFINT_PIT1 - 32))))
+	if ((offset < (1000000 / HZ / 2)) && (*ipr & MCFPIT_IMR_IBIT))
 		offset += 1000000 / HZ;
 	return offset;	
 }