1 files changed, 96 insertions, 0 deletions
diff --git a/arch/ia64/kernel/esi_stub.S b/arch/ia64/kernel/esi_stub.S
new file mode 100644
index 00000000000..6b3d6c1f99b
--- /dev/null
+++ b/arch/ia64/kernel/esi_stub.S
@@ -0,0 +1,96 @@
+/*
+ * ESI call stub.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Alex Williamson <alex.williamson@hp.com>
+ *
+ * Based on EFI call stub by David Mosberger.  The stub is virtually
+ * identical to the one for EFI phys-mode calls, except that ESI
+ * calls may have up to 8 arguments, so they get passed to this routine
+ * through memory.
+ *
+ * This stub allows us to make ESI calls in physical mode with interrupts
+ * turned off.  ESI calls may not support calling from virtual mode.
+ *
+ * Google for "Extensible SAL specification" for a document describing the
+ * ESI standard.
+ */
+
+/*
+ * PSR settings as per SAL spec (Chapter 8 in the "IA-64 System
+ * Abstraction Layer Specification", revision 2.6e).  Note that
+ * psr.dfl and psr.dfh MUST be cleared, despite what this manual says.
+ * Otherwise, SAL dies whenever it's trying to do an IA-32 BIOS call
+ * (the br.ia instruction fails unless psr.dfl and psr.dfh are
+ * cleared).  Fortunately, SAL promises not to touch the floating
+ * point regs, so at least we don't have to save f2-f127.
+ */
+#define PSR_BITS_TO_CLEAR						\
+	(IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_RT |		\
+	 IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED |	\
+	 IA64_PSR_DFL | IA64_PSR_DFH)
+
+#define PSR_BITS_TO_SET							\
+	(IA64_PSR_BN)
+
+#include <asm/processor.h>
+#include <asm/asmmacro.h>
+
+/*
+ * Inputs:
+ *	in0 = address of function descriptor of ESI routine to call
+ *	in1 = address of array of ESI parameters
+ *
+ * Outputs:
+ *	r8 = result returned by called function
+ */
+GLOBAL_ENTRY(esi_call_phys)
+	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(2)
+	alloc loc1=ar.pfs,2,7,8,0
+	ld8 r2=[in0],8			// load ESI function's entry point
+	mov loc0=rp
+	.body
+	;;
+	ld8 out0=[in1],8		// ESI params loaded from array
+	;;				// passing all as inputs doesn't work
+	ld8 out1=[in1],8
+	;;
+	ld8 out2=[in1],8
+	;;
+	ld8 out3=[in1],8
+	;;
+	ld8 out4=[in1],8
+	;;
+	ld8 out5=[in1],8
+	;;
+	ld8 out6=[in1],8
+	;;
+	ld8 out7=[in1]
+	mov loc2=gp			// save global pointer
+	mov loc4=ar.rsc			// save RSE configuration
+	mov ar.rsc=0			// put RSE in enforced lazy, LE mode
+	;;
+	ld8 gp=[in0]			// load ESI function's global pointer
+	movl r16=PSR_BITS_TO_CLEAR
+	mov loc3=psr			// save processor status word
+	movl r17=PSR_BITS_TO_SET
+	;;
+	or loc3=loc3,r17
+	mov b6=r2
+	;;
+	andcm r16=loc3,r16	// get psr with IT, DT, and RT bits cleared
+	br.call.sptk.many rp=ia64_switch_mode_phys
+.ret0:	mov loc5=r19			// old ar.bsp
+	mov loc6=r20			// old sp
+	br.call.sptk.many rp=b6		// call the ESI function
+.ret1:	mov ar.rsc=0			// put RSE in enforced lazy, LE mode
+	mov r16=loc3			// save virtual mode psr
+	mov r19=loc5			// save virtual mode bspstore
+	mov r20=loc6			// save virtual mode sp
+	br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode
+.ret2:	mov ar.rsc=loc4			// restore RSE configuration
+	mov ar.pfs=loc1
+	mov rp=loc0
+	mov gp=loc2
+	br.ret.sptk.many rp
+END(esi_call_phys)