diff options
Diffstat (limited to 'arch/arm/plat-s3c24xx/pm.c')
| -rw-r--r-- | arch/arm/plat-s3c24xx/pm.c | 659 |
1 files changed, 659 insertions, 0 deletions
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c new file mode 100644 index 00000000000..ecf68d61190 --- /dev/null +++ b/arch/arm/plat-s3c24xx/pm.c @@ -0,0 +1,659 @@ +/* linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004,2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Power Manager (Suspend-To-RAM) support + * + * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Parts based on arch/arm/mach-pxa/pm.c + * + * Thanks to Dimitry Andric for debugging +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/crc32.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/serial_core.h> + +#include <asm/cacheflush.h> +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-clock.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> +#include <asm/arch/regs-irq.h> + +#include <asm/mach/time.h> + +#include <asm/plat-s3c24xx/pm.h> + +/* for external use */ + +unsigned long s3c_pm_flags; + +#define PFX "s3c24xx-pm: " + +static struct sleep_save core_save[] = { + SAVE_ITEM(S3C2410_LOCKTIME), + SAVE_ITEM(S3C2410_CLKCON), + + /* we restore the timings here, with the proviso that the board + * brings the system up in an slower, or equal frequency setting + * to the original system. + * + * if we cannot guarantee this, then things are going to go very + * wrong here, as we modify the refresh and both pll settings. + */ + + SAVE_ITEM(S3C2410_BWSCON), + SAVE_ITEM(S3C2410_BANKCON0), + SAVE_ITEM(S3C2410_BANKCON1), + SAVE_ITEM(S3C2410_BANKCON2), + SAVE_ITEM(S3C2410_BANKCON3), + SAVE_ITEM(S3C2410_BANKCON4), + SAVE_ITEM(S3C2410_BANKCON5), + + SAVE_ITEM(S3C2410_CLKDIVN), + SAVE_ITEM(S3C2410_MPLLCON), + SAVE_ITEM(S3C2410_UPLLCON), + SAVE_ITEM(S3C2410_CLKSLOW), + SAVE_ITEM(S3C2410_REFRESH), +}; + +static struct sleep_save gpio_save[] = { + SAVE_ITEM(S3C2410_GPACON), + SAVE_ITEM(S3C2410_GPADAT), + + SAVE_ITEM(S3C2410_GPBCON), + SAVE_ITEM(S3C2410_GPBDAT), + SAVE_ITEM(S3C2410_GPBUP), + + SAVE_ITEM(S3C2410_GPCCON), + SAVE_ITEM(S3C2410_GPCDAT), + SAVE_ITEM(S3C2410_GPCUP), + + SAVE_ITEM(S3C2410_GPDCON), + SAVE_ITEM(S3C2410_GPDDAT), + SAVE_ITEM(S3C2410_GPDUP), + + SAVE_ITEM(S3C2410_GPECON), + SAVE_ITEM(S3C2410_GPEDAT), + SAVE_ITEM(S3C2410_GPEUP), + + SAVE_ITEM(S3C2410_GPFCON), + SAVE_ITEM(S3C2410_GPFDAT), + SAVE_ITEM(S3C2410_GPFUP), + + SAVE_ITEM(S3C2410_GPGCON), + SAVE_ITEM(S3C2410_GPGDAT), + SAVE_ITEM(S3C2410_GPGUP), + + SAVE_ITEM(S3C2410_GPHCON), + SAVE_ITEM(S3C2410_GPHDAT), + SAVE_ITEM(S3C2410_GPHUP), + + SAVE_ITEM(S3C2410_DCLKCON), +}; + +#ifdef CONFIG_S3C2410_PM_DEBUG + +#define SAVE_UART(va) \ + SAVE_ITEM((va) + S3C2410_ULCON), \ + SAVE_ITEM((va) + S3C2410_UCON), \ + SAVE_ITEM((va) + S3C2410_UFCON), \ + SAVE_ITEM((va) + S3C2410_UMCON), \ + SAVE_ITEM((va) + S3C2410_UBRDIV) + +static struct sleep_save uart_save[] = { + SAVE_UART(S3C24XX_VA_UART0), + SAVE_UART(S3C24XX_VA_UART1), +#ifndef CONFIG_CPU_S3C2400 + SAVE_UART(S3C24XX_VA_UART2), +#endif +}; + +/* debug + * + * we send the debug to printascii() to allow it to be seen if the + * system never wakes up from the sleep +*/ + +extern void printascii(const char *); + +void pm_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +static void s3c2410_pm_debug_init(void) +{ + unsigned long tmp = __raw_readl(S3C2410_CLKCON); + + /* re-start uart clocks */ + tmp |= S3C2410_CLKCON_UART0; + tmp |= S3C2410_CLKCON_UART1; + tmp |= S3C2410_CLKCON_UART2; + + __raw_writel(tmp, S3C2410_CLKCON); + udelay(10); +} + +#define DBG(fmt...) pm_dbg(fmt) +#else +#define DBG(fmt...) printk(KERN_DEBUG fmt) + +#define s3c2410_pm_debug_init() do { } while(0) + +static struct sleep_save uart_save[] = {}; +#endif + +#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c2410_pm_run_res + * + * go thorugh the given resource list, and look for system ram +*/ + +static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c2410_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_MEM) && + strcmp(ptr->name, "System RAM") == 0) { + DBG("Found system RAM at %08lx..%08lx\n", + ptr->start, ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c2410_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)(res->end - res->start)+1; + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c2410_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +static void s3c2410_pm_check_prepare(void) +{ + crc_size = 0; + + s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); + + DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c2410_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +static void s3c2410_pm_check_store(void) +{ + if (crcs != NULL) + s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contatins the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) +{ + void *save_at = phys_to_virt(s3c2410_sleep_save_phys); + unsigned long addr; + unsigned long left; + void *ptr; + u32 calc; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, crcs, crc_size)) { + DBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, save_at, 32*4 )) { + DBG("skipping %08lx, has save block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR PFX "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + DBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/* s3c2410_pm_check_restore + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ + +static void s3c2410_pm_check_restore(void) +{ + if (crcs != NULL) { + s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); + kfree(crcs); + crcs = NULL; + } +} + +#else + +#define s3c2410_pm_check_prepare() do { } while(0) +#define s3c2410_pm_check_restore() do { } while(0) +#define s3c2410_pm_check_store() do { } while(0) +#endif + +/* helper functions to save and restore register state */ + +void s3c2410_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = __raw_readl(ptr->reg); + DBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/* s3c2410_pm_do_restore + * + * restore the system from the given list of saved registers + * + * Note, we do not use DBG() in here, as the system may not have + * restore the UARTs state yet +*/ + +void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", + ptr->reg, ptr->val, __raw_readl(ptr->reg)); + + __raw_writel(ptr->val, ptr->reg); + } +} + +/* s3c2410_pm_do_restore_core + * + * similar to s3c2410_pm_do_restore_core + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + __raw_writel(ptr->val, ptr->reg); + } +} + +/* s3c2410_pm_show_resume_irqs + * + * print any IRQs asserted at resume time (ie, we woke from) +*/ + +static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask) +{ + int i; + + which &= ~mask; + + for (i = 0; i <= 31; i++) { + if ((which) & (1L<<i)) { + DBG("IRQ %d asserted at resume\n", start+i); + } + } +} + +/* s3c2410_pm_check_resume_pin + * + * check to see if the pin is configured correctly for sleep mode, and + * make any necessary adjustments if it is not +*/ + +static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +{ + unsigned long irqstate; + unsigned long pinstate; + int irq = s3c2410_gpio_getirq(pin); + + if (irqoffs < 4) + irqstate = s3c_irqwake_intmask & (1L<<irqoffs); + else + irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); + + pinstate = s3c2410_gpio_getcfg(pin); + + if (!irqstate) { + if (pinstate == S3C2410_GPIO_IRQ) + DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); + } else { + if (pinstate == S3C2410_GPIO_IRQ) { + DBG("Disabling IRQ %d (pin %d)\n", irq, pin); + s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); + } + } +} + +/* s3c2410_pm_configure_extint + * + * configure all external interrupt pins +*/ + +static void s3c2410_pm_configure_extint(void) +{ + int pin; + + /* for each of the external interrupts (EINT0..EINT15) we + * need to check wether it is an external interrupt source, + * and then configure it as an input if it is not + */ + + for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { + s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); + } + + for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { + s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + } +} + +void (*pm_cpu_prep)(void); +void (*pm_cpu_sleep)(void); + +#define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) + +/* s3c2410_pm_enter + * + * central control for sleep/resume process +*/ + +static int s3c2410_pm_enter(suspend_state_t state) +{ + unsigned long regs_save[16]; + + /* ensure the debug is initialised (if enabled) */ + + s3c2410_pm_debug_init(); + + DBG("s3c2410_pm_enter(%d)\n", state); + + if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { + printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); + return -EINVAL; + } + + if (state != PM_SUSPEND_MEM) { + printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n"); + return -EINVAL; + } + + /* check if we have anything to wake-up with... bad things seem + * to happen if you suspend with no wakeup (system will often + * require a full power-cycle) + */ + + if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { + printk(KERN_ERR PFX "No sources enabled for wake-up!\n"); + printk(KERN_ERR PFX "Aborting sleep\n"); + return -EINVAL; + } + + /* prepare check area if configured */ + + s3c2410_pm_check_prepare(); + + /* store the physical address of the register recovery block */ + + s3c2410_sleep_save_phys = virt_to_phys(regs_save); + + DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); + + /* save all necessary core registers not covered by the drivers */ + + s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); + s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); + + /* set the irq configuration for wake */ + + s3c2410_pm_configure_extint(); + + DBG("sleep: irq wakeup masks: %08lx,%08lx\n", + s3c_irqwake_intmask, s3c_irqwake_eintmask); + + __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); + __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); + + /* ack any outstanding external interrupts before we go to sleep */ + + __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + + /* call cpu specific preperation */ + + pm_cpu_prep(); + + /* flush cache back to ram */ + + flush_cache_all(); + + s3c2410_pm_check_store(); + + /* send the cpu to sleep... */ + + __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ + + /* s3c2410_cpu_save will also act as our return point from when + * we resume as it saves its own register state, so use the return + * code to differentiate return from save and return from sleep */ + + if (s3c2410_cpu_save(regs_save) == 0) { + flush_cache_all(); + pm_cpu_sleep(); + } + + /* restore the cpu state */ + + cpu_init(); + + /* restore the system state */ + + s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save)); + s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); + + s3c2410_pm_debug_init(); + + /* check what irq (if any) restored the system */ + + DBG("post sleep: IRQs 0x%08x, 0x%08x\n", + __raw_readl(S3C2410_SRCPND), + __raw_readl(S3C2410_EINTPEND)); + + s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), + s3c_irqwake_intmask); + + s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), + s3c_irqwake_eintmask); + + DBG("post sleep, preparing to return\n"); + + s3c2410_pm_check_restore(); + + /* ok, let's return from sleep */ + + DBG("S3C2410 PM Resume (post-restore)\n"); + return 0; +} + +/* + * Called after processes are frozen, but before we shut down devices. + */ +static int s3c2410_pm_prepare(suspend_state_t state) +{ + return 0; +} + +/* + * Called after devices are re-setup, but before processes are thawed. + */ +static int s3c2410_pm_finish(suspend_state_t state) +{ + return 0; +} + +/* + * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk. + */ +static struct pm_ops s3c2410_pm_ops = { + .pm_disk_mode = PM_DISK_FIRMWARE, + .prepare = s3c2410_pm_prepare, + .enter = s3c2410_pm_enter, + .finish = s3c2410_pm_finish, +}; + +/* s3c2410_pm_init + * + * Attach the power management functions. This should be called + * from the board specific initialisation if the board supports + * it. +*/ + +int __init s3c2410_pm_init(void) +{ + printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n"); + + pm_set_ops(&s3c2410_pm_ops); + return 0; +} |