diff options
Diffstat (limited to 'arch/arm/mach-mx2')
| -rw-r--r-- | arch/arm/mach-mx2/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-mx2/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mx2/pca100.c | 244 |
3 files changed, 253 insertions, 0 deletions
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 0c28a37bc14..c8a2eac4d13 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -95,4 +95,11 @@ config MACH_MX27LITE Include support for MX27 LITEKIT platform. This includes specific configurations for the board and its peripherals. +config MACH_PCA100 + bool "Phytec phyCARD-s (pca100)" + depends on MACH_MX27 + help + Include support for phyCARD-s (aka pca100) platform. This + includes specific configurations for the module and its peripherals. + endif diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 8b6846c4226..19560f04563 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -19,3 +19,5 @@ obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o +obj-$(CONFIG_MACH_PCA100) += pca100.o + diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c new file mode 100644 index 00000000000..fe5b165b88c --- /dev/null +++ b/arch/arm/mach-mx2/pca100.c @@ -0,0 +1,244 @@ +/* + * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix + * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c/at24.h> +#include <linux/dma-mapping.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> +#include <linux/irq.h> +#include <linux/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux.h> +#include <mach/i2c.h> +#include <asm/mach/time.h> +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +#include <mach/spi.h> +#endif +#include <mach/imx-uart.h> +#include <mach/mxc_nand.h> +#include <mach/irqs.h> +#include <mach/mmc.h> + +#include "devices.h" + +static int pca100_pins[] = { + /* UART1 */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* SDHC */ + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SSI1 */ + PC20_PF_SSI1_FS, + PC21_PF_SSI1_RXD, + PC22_PF_SSI1_TXD, + PC23_PF_SSI1_CLK, + /* onboard I2C */ + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* external I2C */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + /* SPI1 */ + PD25_PF_CSPI1_RDY, + PD29_PF_CSPI1_SCLK, + PD30_PF_CSPI1_MISO, + PD31_PF_CSPI1_MOSI, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct mxc_nand_platform_data pca100_nand_board_info = { + .width = 1, + .hw_ecc = 1, +}; + +static struct platform_device *platform_devices[] __initdata = { + &mxc_w1_master_device, + &mxc_fec_device, +}; + +static struct imxi2c_platform_data pca100_i2c_1_data = { + .bitrate = 100000, +}; + +static struct at24_platform_data board_eeprom = { + .byte_len = 4096, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info pca100_i2c_devices[] = { + { + I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ + .platform_data = &board_eeprom, + }, { + I2C_BOARD_INFO("rtc-pcf8563", 0x51), + .type = "pcf8563" + }, { + I2C_BOARD_INFO("lm75", 0x4a), + .type = "lm75" + } +}; + +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) +static struct spi_eeprom at25320 = { + .name = "at25320an", + .byte_len = 4096, + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info pca100_spi_board_info[] __initdata = { + { + .modalias = "at25", + .max_speed_hz = 30000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &at25320, + }, +}; + +static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27}; + +static struct spi_imx_master pca100_spi_0_data = { + .chipselect = pca100_spi_cs, + .num_chipselect = ARRAY_SIZE(pca100_spi_cs), +}; +#endif + +static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, + void *data) +{ + int ret; + + ret = request_irq(IRQ_GPIOC(29), detect_irq, + IRQF_DISABLED | IRQF_TRIGGER_FALLING, + "imx-mmc-detect", data); + if (ret) + printk(KERN_ERR + "pca100: Failed to reuest irq for sd/mmc detection\n"); + + return ret; +} + +static void pca100_sdhc2_exit(struct device *dev, void *data) +{ + free_irq(IRQ_GPIOC(29), data); +} + +static struct imxmmc_platform_data sdhc_pdata = { + .init = pca100_sdhc2_init, + .exit = pca100_sdhc2_exit, +}; + +static void __init pca100_init(void) +{ + int ret; + + ret = mxc_gpio_setup_multiple_pins(pca100_pins, + ARRAY_SIZE(pca100_pins), "PCA100"); + if (ret) + printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); + + mxc_register_device(&mxc_uart_device0, &uart_pdata); + + mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN); + mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); + + mxc_register_device(&mxc_nand_device, &pca100_nand_board_info); + + /* only the i2c master 1 is used on this CPU card */ + i2c_register_board_info(1, pca100_i2c_devices, + ARRAY_SIZE(pca100_i2c_devices)); + + mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data); + + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT); + + /* GPIO0_IRQ */ + mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN); + /* GPIO1_IRQ */ + mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN); + /* GPIO2_IRQ */ + mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN); + +#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) + spi_register_board_info(pca100_spi_board_info, + ARRAY_SIZE(pca100_spi_board_info)); + mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data); +#endif + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init pca100_timer_init(void) +{ + mx27_clocks_init(26000000); +} + +static struct sys_timer pca100_timer = { + .init = pca100_timer_init, +}; + +MACHINE_START(PCA100, "phyCARD-i.MX27") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mxc_init_irq, + .init_machine = pca100_init, + .timer = &pca100_timer, +MACHINE_END + |