4 files changed, 56 insertions, 13 deletions
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 9f4458c8e07..22d6c9a6e4c 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -6,6 +6,40 @@
 #define __ASM_ARCH_EP93XX_REGS_H
 
 /*
+ * EP93xx Physical Memory Map:
+ *
+ * The ASDO pin is sampled at system reset to select a synchronous or
+ * asynchronous boot configuration.  When ASDO is "1" (i.e. pulled-up)
+ * the synchronous boot mode is selected.  When ASDO is "0" (i.e
+ * pulled-down) the asynchronous boot mode is selected.
+ *
+ * In synchronous boot mode nSDCE3 is decoded starting at physical address
+ * 0x00000000 and nCS0 is decoded starting at 0xf0000000.  For asynchronous
+ * boot mode they are swapped with nCS0 decoded at 0x00000000 ann nSDCE3
+ * decoded at 0xf0000000.
+ *
+ * There is known errata for the EP93xx dealing with External Memory
+ * Configurations.  Please refer to "AN273: EP93xx Silicon Rev E Design
+ * Guidelines" for more information.  This document can be found at:
+ *
+ *	http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+ */
+
+#define EP93XX_CS0_PHYS_BASE_ASYNC	0x00000000	/* ASDO Pin = 0 */
+#define EP93XX_SDCE3_PHYS_BASE_SYNC	0x00000000	/* ASDO Pin = 1 */
+#define EP93XX_CS1_PHYS_BASE		0x10000000
+#define EP93XX_CS2_PHYS_BASE		0x20000000
+#define EP93XX_CS3_PHYS_BASE		0x30000000
+#define EP93XX_PCMCIA_PHYS_BASE		0x40000000
+#define EP93XX_CS6_PHYS_BASE		0x60000000
+#define EP93XX_CS7_PHYS_BASE		0x70000000
+#define EP93XX_SDCE0_PHYS_BASE		0xc0000000
+#define EP93XX_SDCE1_PHYS_BASE		0xd0000000
+#define EP93XX_SDCE2_PHYS_BASE		0xe0000000
+#define EP93XX_SDCE3_PHYS_BASE_ASYNC	0xf0000000	/* ASDO Pin = 0 */
+#define EP93XX_CS0_PHYS_BASE_SYNC	0xf0000000	/* ASDO Pin = 1 */
+
+/*
  * EP93xx linux memory map:
  *
  * virt		phys		size
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index b5c182473f5..db2489d3bda 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -4,17 +4,17 @@
 
 #ifndef __ASSEMBLY__
 
-void ep93xx_map_io(void);
-void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
-void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
-
 struct ep93xx_eth_data
 {
 	unsigned char	dev_addr[6];
 	unsigned char	phy_id;
 };
 
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 30b318aa1a1..34ddec081c4 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,7 @@
 
 
 #ifndef __ASSEMBLY__
-#include <asm/io.h>
+#include <linux/io.h>
 
 static inline int board_is_ts7200(void)
 {
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index 1fd2f17de32..16026c2b1c8 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -31,10 +31,19 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 	*((volatile unsigned int *)ptr) = value;
 }
 
-
-#define PHYS_UART1_DATA		0x808c0000
-#define PHYS_UART1_FLAG		0x808c0018
-#define UART1_FLAG_TXFF		0x20
+#if defined(CONFIG_EP93XX_EARLY_UART1)
+#define UART_BASE		EP93XX_UART1_PHYS_BASE
+#elif defined(CONFIG_EP93XX_EARLY_UART2)
+#define UART_BASE		EP93XX_UART2_PHYS_BASE
+#elif defined(CONFIG_EP93XX_EARLY_UART3)
+#define UART_BASE		EP93XX_UART3_PHYS_BASE
+#else
+#define UART_BASE		EP93XX_UART1_PHYS_BASE
+#endif
+
+#define PHYS_UART_DATA		(UART_BASE + 0x00)
+#define PHYS_UART_FLAG		(UART_BASE + 0x18)
+#define UART_FLAG_TXFF		0x20
 
 static inline void putc(int c)
 {
@@ -42,11 +51,11 @@ static inline void putc(int c)
 
 	for (i = 0; i < 1000; i++) {
 		/* Transmit fifo not full?  */
-		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
 			break;
 	}
 
-	__raw_writeb(c, PHYS_UART1_DATA);
+	__raw_writeb(c, PHYS_UART_DATA);
 }
 
 static inline void flush(void)