summaryrefslogtreecommitdiffstats
path: root/Documentation/powerpc/dts-bindings
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/powerpc/dts-bindings')
-rw-r--r--Documentation/powerpc/dts-bindings/can/sja1000.txt53
-rw-r--r--Documentation/powerpc/dts-bindings/ecm.txt64
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/board.txt2
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt2
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt2
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt3
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/esdhc.txt5
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/mcm.txt64
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/msi-pic.txt2
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/pmc.txt4
10 files changed, 192 insertions, 9 deletions
diff --git a/Documentation/powerpc/dts-bindings/can/sja1000.txt b/Documentation/powerpc/dts-bindings/can/sja1000.txt
new file mode 100644
index 00000000000..d6d209ded93
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/can/sja1000.txt
@@ -0,0 +1,53 @@
+Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+Required properties:
+
+- compatible : should be "nxp,sja1000".
+
+- reg : should specify the chip select, address offset and size required
+ to map the registers of the SJA1000. The size is usually 0x80.
+
+- interrupts: property with a value describing the interrupt source
+ (number and sensitivity) required for the SJA1000.
+
+Optional properties:
+
+- nxp,external-clock-frequency : Frequency of the external oscillator
+ clock in Hz. Note that the internal clock frequency used by the
+ SJA1000 is half of that value. If not specified, a default value
+ of 16000000 (16 MHz) is used.
+
+- nxp,tx-output-mode : operation mode of the TX output control logic:
+ <0x0> : bi-phase output mode
+ <0x1> : normal output mode (default)
+ <0x2> : test output mode
+ <0x3> : clock output mode
+
+- nxp,tx-output-config : TX output pin configuration:
+ <0x01> : TX0 invert
+ <0x02> : TX0 pull-down (default)
+ <0x04> : TX0 pull-up
+ <0x06> : TX0 push-pull
+ <0x08> : TX1 invert
+ <0x10> : TX1 pull-down
+ <0x20> : TX1 pull-up
+ <0x30> : TX1 push-pull
+
+- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
+ If not specified or if the specified value is 0, the CLKOUT pin
+ will be disabled.
+
+- nxp,no-comparator-bypass : Allows to disable the CAN input comperator.
+
+For futher information, please have a look to the SJA1000 data sheet.
+
+Examples:
+
+can@3,100 {
+ compatible = "nxp,sja1000";
+ reg = <3 0x100 0x80>;
+ interrupts = <2 0>;
+ interrupt-parent = <&mpic>;
+ nxp,external-clock-frequency = <16000000>;
+};
+
diff --git a/Documentation/powerpc/dts-bindings/ecm.txt b/Documentation/powerpc/dts-bindings/ecm.txt
new file mode 100644
index 00000000000..f514f29c67d
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/ecm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+E500 LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured. For ECM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,ecm-law"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - fsl,num-laws
+ Usage: required
+ Value type: <u32>
+ Definition: The value specifies the number of local access
+ windows for this device.
+
+=====================================================================
+
+E500 Coherency Module Node
+
+The E500 LAW node represents the region of CCSR space where ECM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,CHIP-ecm", "fsl,ecm" where
+ CHIP is the processor (mpc8572, mpc8544, etc.)
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ - interrupt-parent
+ Usage: required
+ Value type: <phandle>
+
+=====================================================================
diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt
index 6c974d28eeb..e8b5bc24d0a 100644
--- a/Documentation/powerpc/dts-bindings/fsl/board.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/board.txt
@@ -38,7 +38,7 @@ Required properities:
- reg : Should contain the address and the length of the GPIO bank
register.
- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional paramters (currently unused).
+ second cell is used to specify optional parameters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
index 088fc471e03..160c752484b 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt
@@ -19,7 +19,7 @@ Example:
reg = <119c0 30>;
}
-* Properties common to mulitple CPM/QE devices
+* Properties common to multiple CPM/QE devices
- fsl,cpm-command : This value is ORed with the opcode and command flag
to specify the device on which a CPM command operates.
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
index 1815dfede1b..349f79fd707 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt
@@ -11,7 +11,7 @@ Required properties:
"fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
"fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
- #gpio-cells : Should be two. The first cell is the pin number and the
- second cell is used to specify optional paramters (currently unused).
+ second cell is used to specify optional parameters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example of three SOC GPIO banks defined as gpio-controller nodes:
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 78790d58dc2..6e37be1eeb2 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -17,6 +17,9 @@ Required properties:
- model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
- reg : offset and length of the device registers.
- bus-frequency : the clock frequency for QUICC Engine.
+- fsl,qe-num-riscs: define how many RISC engines the QE has.
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
+ threads.
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 60084655776..5093ddf900d 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -5,8 +5,7 @@ for MMC, SD, and SDIO types of memory cards.
Required properties:
- compatible : should be
- "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
- "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+ "fsl,<chip>-esdhc", "fsl,esdhc"
- reg : should contain eSDHC registers location and length.
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
@@ -15,7 +14,7 @@ Required properties:
Example:
sdhci@2e000 {
- compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+ compatible = "fsl,mpc8378-esdhc", "fsl,esdhc";
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
diff --git a/Documentation/powerpc/dts-bindings/fsl/mcm.txt b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
new file mode 100644
index 00000000000..4ceda9b3b41
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mcm.txt
@@ -0,0 +1,64 @@
+=====================================================================
+MPX LAW & Coherency Module Device Tree Binding
+Copyright (C) 2009 Freescale Semiconductor Inc.
+=====================================================================
+
+Local Access Window (LAW) Node
+
+The LAW node represents the region of CCSR space where local access
+windows are configured. For MCM based devices this is the first 4k
+of CCSR space that includes CCSRBAR, ALTCBAR, ALTCAR, BPTR, and some
+number of local access windows as specified by fsl,num-laws.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,mcm-law"
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - fsl,num-laws
+ Usage: required
+ Value type: <u32>
+ Definition: The value specifies the number of local access
+ windows for this device.
+
+=====================================================================
+
+MPX Coherency Module Node
+
+The MPX LAW node represents the region of CCSR space where MCM config
+and error reporting registers exist, this is the second 4k (0x1000)
+of CCSR space.
+
+PROPERTIES
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,CHIP-mcm", "fsl,mcm" where
+ CHIP is the processor (mpc8641, mpc8610, etc.)
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. The value specifies the
+ physical address offset and length of the CCSR space
+ registers.
+
+ - interrupts
+ Usage: required
+ Value type: <prop-encoded-array>
+
+ - interrupt-parent
+ Usage: required
+ Value type: <phandle>
+
+=====================================================================
diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
index b26b91992c5..bcc30bac683 100644
--- a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt
@@ -1,6 +1,6 @@
* Freescale MSI interrupt controller
-Reguired properities:
+Required properties:
- compatible : compatible list, contains 2 entries,
first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
diff --git a/Documentation/powerpc/dts-bindings/fsl/pmc.txt b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
index 02f6f43ee1b..07256b7ffca 100644
--- a/Documentation/powerpc/dts-bindings/fsl/pmc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/pmc.txt
@@ -15,8 +15,8 @@ Properties:
compatible; all statements below that apply to "fsl,mpc8548-pmc" also
apply to "fsl,mpc8641d-pmc".
- Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
- bit assigments are indicated via the sleep specifier in each device's
+ Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these
+ bit assignments are indicated via the sleep specifier in each device's
sleep property.
- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource