summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/kprobes.txt1
-rw-r--r--arch/arm/Kconfig34
-rw-r--r--arch/arm/Kconfig.debug6
-rw-r--r--arch/arm/Kconfig.instrumentation10
-rw-r--r--arch/arm/Makefile1
-rw-r--r--arch/arm/boot/compressed/Makefile4
-rw-r--r--arch/arm/boot/compressed/head-at91rm9200.S81
-rw-r--r--arch/arm/common/rtctime.c1
-rw-r--r--arch/arm/configs/at91cap9adk_defconfig1143
-rw-r--r--arch/arm/configs/collie_defconfig1
-rw-r--r--arch/arm/configs/iop13xx_defconfig156
-rw-r--r--arch/arm/configs/iop32x_defconfig207
-rw-r--r--arch/arm/configs/iop33x_defconfig154
-rw-r--r--arch/arm/configs/msm_defconfig895
-rw-r--r--arch/arm/kernel/Makefile1
-rw-r--r--arch/arm/kernel/dma-isa.c2
-rw-r--r--arch/arm/kernel/entry-armv.S63
-rw-r--r--arch/arm/kernel/entry-common.S2
-rw-r--r--arch/arm/kernel/kprobes-decode.c1529
-rw-r--r--arch/arm/kernel/kprobes.c447
-rw-r--r--arch/arm/kernel/traps.c21
-rw-r--r--arch/arm/kernel/vmlinux.lds.S1
-rw-r--r--arch/arm/mach-at91/Kconfig38
-rw-r--r--arch/arm/mach-at91/Makefile23
-rw-r--r--arch/arm/mach-at91/Makefile.boot7
-rw-r--r--arch/arm/mach-at91/at91cap9.c365
-rw-r--r--arch/arm/mach-at91/at91cap9_devices.c1066
-rw-r--r--arch/arm/mach-at91/at91rm9200.c30
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c350
-rw-r--r--arch/arm/mach-at91/at91sam9260.c28
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c315
-rw-r--r--arch/arm/mach-at91/at91sam9261.c28
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c366
-rw-r--r--arch/arm/mach-at91/at91sam9263.c30
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c382
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c346
-rw-r--r--arch/arm/mach-at91/board-cap9adk.c359
-rw-r--r--arch/arm/mach-at91/board-csb337.c85
-rw-r--r--arch/arm/mach-at91/board-dk.c10
-rw-r--r--arch/arm/mach-at91/board-ek.c21
-rw-r--r--arch/arm/mach-at91/board-sam9261ek.c84
-rw-r--r--arch/arm/mach-at91/board-sam9263ek.c80
-rw-r--r--arch/arm/mach-at91/clock.c2
-rw-r--r--arch/arm/mach-at91/generic.h2
-rw-r--r--arch/arm/mach-at91/gpio.c62
-rw-r--r--arch/arm/mach-at91/leds.c68
-rw-r--r--arch/arm/mach-at91/pm.c5
-rw-r--r--arch/arm/mach-ep93xx/core.c258
-rw-r--r--arch/arm/mach-integrator/pci_v3.c8
-rw-r--r--arch/arm/mach-iop32x/glantank.c15
-rw-r--r--arch/arm/mach-ixp23xx/core.c1
-rw-r--r--arch/arm/mach-ixp23xx/espresso.c2
-rw-r--r--arch/arm/mach-ixp23xx/ixdp2351.c2
-rw-r--r--arch/arm/mach-ixp23xx/roadrunner.c2
-rw-r--r--arch/arm/mach-ixp4xx/nslu2-power.c1
-rw-r--r--arch/arm/mach-ks8695/Makefile2
-rw-r--r--arch/arm/mach-ks8695/board-micrel.c2
-rw-r--r--arch/arm/mach-ks8695/gpio.c83
-rw-r--r--arch/arm/mach-ks8695/pci.c326
-rw-r--r--arch/arm/mach-msm/Kconfig18
-rw-r--r--arch/arm/mach-msm/Makefile7
-rw-r--r--arch/arm/mach-msm/Makefile.boot3
-rw-r--r--arch/arm/mach-msm/board-halibut.c114
-rw-r--r--arch/arm/mach-msm/common.c116
-rw-r--r--arch/arm/mach-msm/dma.c214
-rw-r--r--arch/arm/mach-msm/idle.S36
-rw-r--r--arch/arm/mach-msm/io.c85
-rw-r--r--arch/arm/mach-msm/irq.c154
-rw-r--r--arch/arm/mach-msm/timer.c205
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c1
-rw-r--r--arch/arm/mach-omap1/board-osk.c1
-rw-r--r--arch/arm/mach-omap1/board-palmtt.c1
-rw-r--r--arch/arm/mach-omap1/board-palmz71.c1
-rw-r--r--arch/arm/mach-omap1/pm.c2
-rw-r--r--arch/arm/mach-omap2/board-apollon.c1
-rw-r--r--arch/arm/mach-pxa/ssp.c2
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c3
-rw-r--r--arch/arm/mach-s3c2410/mach-vr1000.c1
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c2
-rw-r--r--arch/arm/mach-s3c2412/Kconfig1
-rw-r--r--arch/arm/mach-s3c2412/Makefile3
-rw-r--r--arch/arm/mach-s3c2412/clock.c54
-rw-r--r--arch/arm/mach-s3c2412/dma.c48
-rw-r--r--arch/arm/mach-s3c2412/gpio.c60
-rw-r--r--arch/arm/mach-s3c2412/irq.c24
-rw-r--r--arch/arm/mach-s3c2412/pm.c18
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c2
-rw-r--r--arch/arm/mach-s3c2412/sleep.S68
-rw-r--r--arch/arm/mach-s3c2440/clock.c22
-rw-r--r--arch/arm/mach-s3c2442/clock.c22
-rw-r--r--arch/arm/mach-sa1100/ssp.c3
-rw-r--r--arch/arm/mach-sa1100/time.c38
-rw-r--r--arch/arm/mm/Kconfig7
-rw-r--r--arch/arm/mm/fault.c31
-rw-r--r--arch/arm/plat-omap/mailbox.c2
-rw-r--r--arch/arm/plat-omap/mcbsp.c20
-rw-r--r--arch/arm/plat-s3c24xx/Makefile1
-rw-r--r--arch/arm/plat-s3c24xx/clock.c19
-rw-r--r--arch/arm/plat-s3c24xx/dma.c47
-rw-r--r--arch/arm/plat-s3c24xx/gpio.c29
-rw-r--r--arch/arm/plat-s3c24xx/irq.c2
-rw-r--r--arch/arm/plat-s3c24xx/pm.c247
-rw-r--r--arch/arm/plat-s3c24xx/s3c244x-clock.c137
-rw-r--r--arch/arm/tools/mach-types258
-rw-r--r--arch/arm/vfp/vfp.h4
-rw-r--r--arch/arm/vfp/vfphw.S60
-rw-r--r--arch/arm/vfp/vfpinstr.h6
-rw-r--r--arch/arm/vfp/vfpmodule.c98
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/serial/21285.c2
-rw-r--r--drivers/usb/gadget/Kconfig2
-rw-r--r--drivers/video/Kconfig2
-rw-r--r--drivers/video/atmel_lcdfb.c2
-rw-r--r--include/asm-arm/arch-at91/at91_lcdc.h148
-rw-r--r--include/asm-arm/arch-at91/at91_pmc.h9
-rw-r--r--include/asm-arm/arch-at91/at91_rtt.h8
-rw-r--r--include/asm-arm/arch-at91/at91_twi.h11
-rw-r--r--include/asm-arm/arch-at91/at91cap9.h121
-rw-r--r--include/asm-arm/arch-at91/at91cap9_matrix.h132
-rw-r--r--include/asm-arm/arch-at91/at91sam9260_matrix.h2
-rw-r--r--include/asm-arm/arch-at91/at91sam9263_matrix.h2
-rw-r--r--include/asm-arm/arch-at91/at91sam9rl_matrix.h2
-rw-r--r--include/asm-arm/arch-at91/board.h38
-rw-r--r--include/asm-arm/arch-at91/cpu.h9
-rw-r--r--include/asm-arm/arch-at91/entry-macro.S2
-rw-r--r--include/asm-arm/arch-at91/hardware.h2
-rw-r--r--include/asm-arm/arch-at91/timex.h5
-rw-r--r--include/asm-arm/arch-ep93xx/gpio.h58
-rw-r--r--include/asm-arm/arch-ep93xx/irqs.h6
-rw-r--r--include/asm-arm/arch-ixp4xx/io.h16
-rw-r--r--include/asm-arm/arch-ks8695/regs-gpio.h2
-rw-r--r--include/asm-arm/arch-msm/board.h37
-rw-r--r--include/asm-arm/arch-msm/debug-macro.S40
-rw-r--r--include/asm-arm/arch-msm/dma.h151
-rw-r--r--include/asm-arm/arch-msm/entry-macro.S38
-rw-r--r--include/asm-arm/arch-msm/hardware.h18
-rw-r--r--include/asm-arm/arch-msm/io.h33
-rw-r--r--include/asm-arm/arch-msm/irqs.h89
-rw-r--r--include/asm-arm/arch-msm/memory.h27
-rw-r--r--include/asm-arm/arch-msm/msm_iomap.h104
-rw-r--r--include/asm-arm/arch-msm/system.h23
-rw-r--r--include/asm-arm/arch-msm/timex.h20
-rw-r--r--include/asm-arm/arch-msm/uncompress.h36
-rw-r--r--include/asm-arm/arch-msm/vmalloc.h22
-rw-r--r--include/asm-arm/arch-s3c2410/debug-macro.S2
-rw-r--r--include/asm-arm/arch-s3c2410/dma.h1
-rw-r--r--include/asm-arm/arch-s3c2410/hardware.h28
-rw-r--r--include/asm-arm/arch-s3c2410/irqs.h3
-rw-r--r--include/asm-arm/arch-s3c2410/regs-clock.h2
-rw-r--r--include/asm-arm/arch-s3c2410/regs-dsc.h2
-rw-r--r--include/asm-arm/arch-s3c2410/regs-gpio.h6
-rw-r--r--include/asm-arm/arch-s3c2410/regs-mem.h6
-rw-r--r--include/asm-arm/arch-s3c2410/regs-power.h3
-rw-r--r--include/asm-arm/arch-s3c2410/system.h20
-rw-r--r--include/asm-arm/fpstate.h9
-rw-r--r--include/asm-arm/kprobes.h79
-rw-r--r--include/asm-arm/plat-s3c24xx/dma.h5
-rw-r--r--include/asm-arm/plat-s3c24xx/irq.h2
-rw-r--r--include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h72
-rw-r--r--include/asm-arm/plat-s3c24xx/regs-spi.h32
-rw-r--r--include/asm-arm/traps.h9
-rw-r--r--include/asm-arm/vfp.h34
-rw-r--r--include/asm-arm/vfpmacros.h18
-rw-r--r--include/asm-avr32/arch-at32ap/cpu.h1
-rw-r--r--sound/oss/waveartist.c2
165 files changed, 12218 insertions, 1251 deletions
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index cb12ae175aa..53a63890aea 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -141,6 +141,7 @@ architectures:
- ppc64
- ia64 (Does not support probes on instruction slot1.)
- sparc64 (Return probes not yet implemented.)
+- arm
3. Configuring Kprobes
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a04f507e7f2..e53b0ed9d00 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -180,8 +180,8 @@ config ARCH_AT91
bool "Atmel AT91"
select GENERIC_GPIO
help
- This enables support for systems based on the Atmel AT91RM9200
- and AT91SAM9xxx processors.
+ This enables support for systems based on the Atmel AT91RM9200,
+ AT91SAM9 and AT91CAP9 processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
@@ -217,6 +217,7 @@ config ARCH_EP93XX
bool "EP93xx-based"
select ARM_AMBA
select ARM_VIC
+ select GENERIC_GPIO
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -366,6 +367,7 @@ config ARCH_SA1100
select ARCH_DISCONTIGMEM_ENABLE
select ARCH_MTD_XIP
select GENERIC_GPIO
+ select GENERIC_TIME
help
Support for StrongARM 11x0 based boards.
@@ -409,6 +411,17 @@ config ARCH_OMAP
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
+config ARCH_MSM7X00A
+ bool "Qualcomm MSM7X00A"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ help
+ Support for Qualcomm MSM7X00A based systems. This runs on the ARM11
+ apps processor of the MSM7X00A and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
+ <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp>
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -477,6 +490,8 @@ source "arch/arm/mach-davinci/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-msm/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -657,6 +672,7 @@ config HZ
default 128 if ARCH_L7200
default 200 if ARCH_EBSA110 || ARCH_S3C2410
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
+ default AT91_TIMER_HZ if ARCH_AT91
default 100
config AEABI
@@ -951,7 +967,7 @@ config FPE_FASTFPE
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T
+ depends on CPU_V6 || CPU_ARM926T || CPU_V7
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
@@ -961,6 +977,18 @@ config VFP
Say N if your target does not have VFP hardware.
+config VFPv3
+ bool
+ depends on VFP
+ default y if CPU_V7
+
+config NEON
+ bool "Advanced SIMD (NEON) Extension support"
+ depends on VFPv3 && CPU_V7
+ help
+ Say Y to include support code for NEON, the ARMv7 Advanced SIMD
+ Extension.
+
endmenu
menu "Userspace binary formats"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 18101f5f5f2..192ee01a9ba 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -43,6 +43,12 @@ config DEBUG_ERRORS
you are concerned with the code size or don't want to see these
messages.
+config DEBUG_STACK_USAGE
+ bool "Enable stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T output.
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
diff --git a/arch/arm/Kconfig.instrumentation b/arch/arm/Kconfig.instrumentation
index 63b8c6d5606..453ad8e15d6 100644
--- a/arch/arm/Kconfig.instrumentation
+++ b/arch/arm/Kconfig.instrumentation
@@ -43,6 +43,16 @@ config OPROFILE_MPCORE
config OPROFILE_ARM11_CORE
bool
+config KPROBES
+ bool "Kprobes"
+ depends on KALLSYMS && MODULES && !UML && !XIP_KERNEL
+ help
+ Kprobes allows you to trap at almost any kernel address and
+ execute a callback function. register_kprobe() establishes
+ a probepoint and specifies the callback. Kprobes is useful
+ for kernel debugging, non-intrusive instrumentation and testing.
+ If in doubt, say "N".
+
config MARKERS
bool "Activate markers"
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 35e56c99ad1..dd220d18984 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -139,6 +139,7 @@ endif
machine-$(CONFIG_ARCH_KS8695) := ks8695
incdir-$(CONFIG_ARCH_MXC) := mxc
machine-$(CONFIG_ARCH_MX3) := mx3
+ machine-$(CONFIG_ARCH_MSM7X00A) := msm
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 5fde99f9d9f..de9d9ee5095 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -44,10 +44,6 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
OBJS += head-sharpsl.o
endif
-ifeq ($(CONFIG_ARCH_AT91RM9200),y)
-OBJS += head-at91rm9200.o
-endif
-
ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S
deleted file mode 100644
index 11782ccd93a..00000000000
--- a/arch/arm/boot/compressed/head-at91rm9200.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/arm/boot/compressed/head-at91rm9200.S
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach-types.h>
-
- .section ".start", "ax"
-
- @ Atmel AT91RM9200-DK : 262
- mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff)
- orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Cogent CSB337 : 399
- mov r3, #(MACH_TYPE_CSB337 & 0xff)
- orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Cogent CSB637 : 648
- mov r3, #(MACH_TYPE_CSB637 & 0xff)
- orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Atmel AT91RM9200-EK : 705
- mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff)
- orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Conitec Carmeva : 769
- mov r3, #(MACH_TYPE_CARMEVA & 0xff)
- orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ KwikByte KB920x : 612
- mov r3, #(MACH_TYPE_KB9200 & 0xff)
- orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Embest ATEB9200 : 923
- mov r3, #(MACH_TYPE_ATEB9200 & 0xff)
- orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Sperry-Sun KAFA : 662
- mov r3, #(MACH_TYPE_KAFA & 0xff)
- orr r3, r3, #(MACH_TYPE_KAFA & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ picotux 200 : 963
- mov r3, #(MACH_TYPE_PICOTUX2XX & 0xff)
- orr r3, r3, #(MACH_TYPE_PICOTUX2XX & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Ajeco 1ARM : 1075
- mov r3, #(MACH_TYPE_ONEARM & 0xff)
- orr r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
- cmp r7, r3
- beq 99f
-
- @ Unknown board, use the AT91RM9200DK board
- @ mov r7, #MACH_TYPE_AT91RM9200
- mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
- orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00)
-
-99:
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
index bf1075e1f57..f53bca46e23 100644
--- a/arch/arm/common/rtctime.c
+++ b/arch/arm/common/rtctime.c
@@ -20,7 +20,6 @@
#include <linux/capability.h>
#include <linux/device.h>
#include <linux/mutex.h>
-#include <linux/rtc.h>
#include <asm/rtc.h>
#include <asm/semaphore.h>
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
new file mode 100644
index 00000000000..e32e7364812
--- /dev/null
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -0,0 +1,1143 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8
+# Wed Jan 23 22:55:57 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91CAP9=y
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91CAP9 Board Type
+#
+CONFIG_MACH_AT91CAP9ADK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 970c8c772eb..4264e273202 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -367,7 +367,6 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_SHARP=y
# CONFIG_MTD_XIP is not set
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index add03c9e555..988b4d13e76 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 15:57:52 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 16:11:03 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
@@ -45,10 +41,15 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@ CONFIG_ARCH_IOP13XX=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -151,9 +152,12 @@ CONFIG_MACH_IQ81340SC=y
CONFIG_MACH_IQ81340MC=y
#
-# IOP13XX IMU Support
+# Boot options
+#
+
+#
+# Power management
#
-# CONFIG_IOP_IMU is not set
CONFIG_PLAT_IOP=y
#
@@ -185,10 +189,7 @@ CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
# CONFIG_PCCARD is not set
#
@@ -207,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -246,6 +248,7 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -285,6 +288,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -324,10 +328,6 @@ CONFIG_IPV6=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -356,6 +356,7 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -383,6 +384,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -423,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0xfa000000
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -463,6 +466,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
#
# SCSI device support
@@ -499,12 +507,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -515,6 +520,7 @@ CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -555,14 +561,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -577,6 +577,8 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
@@ -585,6 +587,7 @@ CONFIG_NETDEV_1000=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -592,6 +595,7 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -600,11 +604,14 @@ CONFIG_E1000_NAPI=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -639,7 +646,6 @@ CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -688,12 +694,10 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -758,9 +762,9 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -768,12 +772,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -787,14 +792,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -806,29 +814,18 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_WATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
@@ -840,14 +837,16 @@ CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -862,6 +861,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -877,16 +877,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
#
-# DMA Engine support
+# DMA Devices
#
+CONFIG_INTEL_IOP_ADMA=y
CONFIG_DMA_ENGINE=y
#
@@ -895,12 +894,6 @@ CONFIG_DMA_ENGINE=y
# CONFIG_NET_DMA is not set
#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-CONFIG_INTEL_IOP_ADMA=y
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -912,7 +905,6 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -952,7 +944,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -969,10 +960,12 @@ CONFIG_ECRYPT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
@@ -981,10 +974,7 @@ CONFIG_CRAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1037,10 +1027,6 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -1081,21 +1067,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1104,6 +1085,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
#
@@ -1112,6 +1094,7 @@ CONFIG_DEBUG_USER=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1136,6 +1119,7 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1150,11 +1134,13 @@ CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 027aef22b4d..83f40d4041a 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 16:00:36 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 15:49:08 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@ CONFIG_ARCH_IOP32X=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -153,6 +154,15 @@ CONFIG_ARCH_IQ80321=y
CONFIG_ARCH_IQ31244=y
CONFIG_MACH_N2100=y
CONFIG_IOP3XX_ATU=y
+# CONFIG_MACH_EM7210 is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
CONFIG_PLAT_IOP=y
#
@@ -182,11 +192,8 @@ CONFIG_XSCALE_PMU=y
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -205,6 +212,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -244,6 +252,7 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -282,6 +291,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -321,10 +331,6 @@ CONFIG_IPV6=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -353,6 +359,7 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -382,6 +389,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -417,6 +425,7 @@ CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -459,6 +468,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
@@ -496,12 +510,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,6 +523,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -576,6 +588,7 @@ CONFIG_SATA_VITESSE=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
@@ -606,14 +619,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -628,6 +635,8 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
@@ -641,13 +650,16 @@ CONFIG_MII=y
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
@@ -667,6 +679,7 @@ CONFIG_NETDEV_1000=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -675,6 +688,7 @@ CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -683,11 +697,14 @@ CONFIG_R8169=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -703,7 +720,6 @@ CONFIG_NETDEV_10000=y
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
@@ -732,7 +748,6 @@ CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -781,12 +796,10 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -852,9 +865,9 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -862,12 +875,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -881,14 +895,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -900,29 +917,18 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_WATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
@@ -935,14 +941,16 @@ CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -957,6 +965,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
@@ -1013,6 +1022,7 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
@@ -1070,28 +1080,66 @@ CONFIG_USB_MON=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# Real Time Clock
+# RTC interfaces
#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Engine support
+# I2C RTC drivers
#
-CONFIG_DMA_ENGINE=y
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
#
-# DMA Clients
+# SPI RTC drivers
#
-CONFIG_NET_DMA=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_DMADEVICES=y
#
# DMA Devices
#
-# CONFIG_INTEL_IOATDMA is not set
CONFIG_INTEL_IOP_ADMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
#
# File systems
@@ -1105,7 +1153,6 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -1145,7 +1192,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1162,10 +1208,12 @@ CONFIG_ECRYPT_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
@@ -1174,10 +1222,7 @@ CONFIG_CRAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1224,26 +1269,17 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1270,10 +1306,13 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
@@ -1285,6 +1324,7 @@ CONFIG_DEBUG_LL=y
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
@@ -1309,6 +1349,7 @@ CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=y
+# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
@@ -1323,11 +1364,13 @@ CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_HW=y
#
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 721ee64a13f..917afb5ccfa 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22
-# Thu Jul 19 16:05:59 2007
+# Linux kernel version: 2.6.24-rc5
+# Wed Dec 12 16:11:27 2007
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -26,15 +26,11 @@ CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
@@ -45,9 +41,14 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -69,7 +70,6 @@ CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -130,6 +130,7 @@ CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
@@ -150,6 +151,14 @@ CONFIG_IOP3XX_ATU=y
#
CONFIG_ARCH_IQ80331=y
CONFIG_MACH_IQ80332=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
CONFIG_PLAT_IOP=y
#
@@ -179,11 +188,8 @@ CONFIG_XSCALE_PMU=y
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -202,6 +208,7 @@ CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -241,6 +248,7 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
#
# Networking
@@ -279,6 +287,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -318,10 +327,6 @@ CONFIG_IPV6=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -350,6 +355,7 @@ CONFIG_IPV6=y
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -379,6 +385,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -419,6 +426,7 @@ CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
@@ -459,6 +467,11 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
# CONFIG_IDE is not set
#
@@ -496,12 +509,9 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -512,6 +522,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
@@ -552,14 +563,8 @@ CONFIG_BLK_DEV_DM=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -574,6 +579,8 @@ CONFIG_NETDEVICES=y
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
@@ -582,6 +589,7 @@ CONFIG_NETDEV_1000=y
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -589,6 +597,7 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -597,11 +606,14 @@ CONFIG_E1000_NAPI=y
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
@@ -636,7 +648,6 @@ CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -685,12 +696,10 @@ CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
@@ -755,9 +764,9 @@ CONFIG_I2C_IOP3XX=y
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -765,12 +774,13 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -784,14 +794,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -803,29 +816,18 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_WATCHDOG is not set
#
-# LED drivers
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
@@ -837,14 +839,16 @@ CONFIG_DAB=y
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Console display driver support
@@ -859,6 +863,7 @@ CONFIG_DUMMY_CONSOLE=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -874,16 +879,15 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
#
-# DMA Engine support
+# DMA Devices
#
+CONFIG_INTEL_IOP_ADMA=y
CONFIG_DMA_ENGINE=y
#
@@ -892,12 +896,6 @@ CONFIG_DMA_ENGINE=y
CONFIG_NET_DMA=y
#
-# DMA Devices
-#
-# CONFIG_INTEL_IOATDMA is not set
-CONFIG_INTEL_IOP_ADMA=y
-
-#
# File systems
#
CONFIG_EXT2_FS=y
@@ -909,7 +907,6 @@ CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
@@ -949,7 +946,6 @@ CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -969,10 +965,7 @@ CONFIG_CRAMFS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1019,26 +1012,17 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1065,10 +1049,13 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
CONFIG_DEBUG_LL=y
@@ -1079,6 +1066,7 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
new file mode 100644
index 00000000000..ae4c5e62086
--- /dev/null
+++ b/arch/arm/configs/msm_defconfig
@@ -0,0 +1,895 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Wed Nov 7 01:36:45 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_GPIOS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_GOLDFISH is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_MSM7X00A=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# MSM7200 Board Type
+#
+CONFIG_MACH_HALIBUT=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+# CONFIG_SERIAL_MSM_NOINIT is not set
+CONFIG_MSM_SMD=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyMSM,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_MSM_NAND=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_GOLDFISH_NAND is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+CONFIG_MSM_RMNET=y
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GOLDFISH_EVENTS is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_MEP is not set
+CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI=y
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DCC_TTY=y
+# CONFIG_GOLDFISH_TTY is not set
+CONFIG_BINDER=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_MSM=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+CONFIG_SENSORS_PCA9633=y
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_SENSORS_AKM8976=y
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_LOW_MEMORY_KILLER=y
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_MSM=y
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# USB Function Support
+#
+CONFIG_USB_FUNCTION=y
+CONFIG_USB_FUNCTION_MSM_HSUSB=y
+# CONFIG_USB_FUNCTION_NULL is not set
+# CONFIG_USB_FUNCTION_ZERO is not set
+# CONFIG_USB_FUNCTION_LOOPBACK is not set
+CONFIG_USB_FUNCTION_ADB=y
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Android
+#
+# CONFIG_ANDROID_GADGET is not set
+# CONFIG_ANDROID_RAM_CONSOLE is not set
+CONFIG_ANDROID_LOGGER=y
+CONFIG_ANDROID_VIBRATOR=y
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 593b56509f4..faa76192115 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 0a3e9ad297d..2f080a35a2d 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -216,7 +216,7 @@ void __init isa_init_dma(dma_t *dma)
request_dma(DMA_ISA_CASCADE, "cascade");
- for (i = 0; i < sizeof(dma_resources) / sizeof(dma_resources[0]); i++)
+ for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
request_resource(&ioport_resource, dma_resources + i);
}
}
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 29dec080a60..a46d5b45676 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -11,8 +11,8 @@
*
* Low-level vector interface routines
*
- * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
- * it to save wrong values... Be aware!
+ * Note: there is a StrongARM bug in the STMIA rn, {regs}^ instruction
+ * that causes it to save wrong values... Be aware!
*/
#include <asm/memory.h>
@@ -58,6 +58,12 @@
.endm
+#ifdef CONFIG_KPROBES
+ .section .kprobes.text,"ax",%progbits
+#else
+ .text
+#endif
+
/*
* Invalid mode handlers
*/
@@ -112,8 +118,8 @@ common_invalid:
#define SPFIX(code...)
#endif
- .macro svc_entry
- sub sp, sp, #S_FRAME_SIZE
+ .macro svc_entry, stack_hole=0
+ sub sp, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( tst sp, #4 )
SPFIX( bicne sp, sp, #4 )
stmib sp, {r1 - r12}
@@ -121,7 +127,7 @@ common_invalid:
ldmia r0, {r1 - r3}
add r5, sp, #S_SP @ here for interlock avoidance
mov r4, #-1 @ "" "" "" ""
- add r0, sp, #S_FRAME_SIZE @ "" "" "" ""
+ add r0, sp, #(S_FRAME_SIZE + \stack_hole)
SPFIX( addne r0, r0, #4 )
str r1, [sp] @ save the "real" r0 copied
@ from the exception stack
@@ -242,7 +248,14 @@ svc_preempt:
.align 5
__und_svc:
+#ifdef CONFIG_KPROBES
+ @ If a kprobe is about to simulate a "stmdb sp..." instruction,
+ @ it obviously needs free stack space which then will belong to
+ @ the saved context.
+ svc_entry 64
+#else
svc_entry
+#endif
@
@ call emulation code, which returns using r9 if it has emulated
@@ -480,6 +493,13 @@ __und_usr:
* co-processor instructions. However, we have to watch out
* for the ARM6/ARM7 SWI bug.
*
+ * NEON is a special case that has to be handled here. Not all
+ * NEON instructions are co-processor instructions, so we have
+ * to make a special case of checking for them. Plus, there's
+ * five groups of them, so we have a table of mask/opcode pairs
+ * to check against, and if any match then we branch off into the
+ * NEON handler code.
+ *
* Emulators may wish to make use of the following registers:
* r0 = instruction opcode.
* r2 = PC+4
@@ -488,6 +508,23 @@ __und_usr:
* lr = unrecognised instruction return address
*/
call_fpe:
+#ifdef CONFIG_NEON
+ adr r6, .LCneon_opcodes
+2:
+ ldr r7, [r6], #4 @ mask value
+ cmp r7, #0 @ end mask?
+ beq 1f
+ and r8, r0, r7
+ ldr r7, [r6], #4 @ opcode bits matching in mask
+ cmp r8, r7 @ NEON instruction?
+ bne 2b
+ get_thread_info r10
+ mov r7, #1
+ strb r7, [r10, #TI_USED_CP + 10] @ mark CP#10 as used
+ strb r7, [r10, #TI_USED_CP + 11] @ mark CP#11 as used
+ b do_vfp @ let VFP handler handle this
+1:
+#endif
tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27
#if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
and r8, r0, #0x0f000000 @ mask out op-code bits
@@ -537,6 +574,20 @@ call_fpe:
mov pc, lr @ CP#14 (Debug)
mov pc, lr @ CP#15 (Control)
+#ifdef CONFIG_NEON
+ .align 6
+
+.LCneon_opcodes:
+ .word 0xfe000000 @ mask
+ .word 0xf2000000 @ opcode
+
+ .word 0xff100000 @ mask
+ .word 0xf4000000 @ opcode
+
+ .word 0x00000000 @ mask
+ .word 0x00000000 @ opcode
+#endif
+
do_fpe:
enable_irq
ldr r4, .LCfp
@@ -555,7 +606,7 @@ do_fpe:
.data
ENTRY(fp_enter)
.word no_fp
- .text
+ .previous
no_fp: mov pc, lr
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 33e6cc2ffd3..6c90c50a9ee 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -72,7 +72,7 @@ no_work_pending:
ldr r1, [sp, #S_PSR] @ get calling cpsr
ldr lr, [sp, #S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
- ldmdb sp, {r0 - lr}^ @ get calling r1 - lr
+ ldmdb sp, {r0 - lr}^ @ get calling r0 - lr
mov r0, r0
add sp, sp, #S_FRAME_SIZE - S_PC
movs pc, lr @ return & move spsr_svc into cpsr
diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c
new file mode 100644
index 00000000000..d51bc8b6055
--- /dev/null
+++ b/arch/arm/kernel/kprobes-decode.c
@@ -0,0 +1,1529 @@
+/*
+ * arch/arm/kernel/kprobes-decode.c
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * We do not have hardware single-stepping on ARM, This
+ * effort is further complicated by the ARM not having a
+ * "next PC" register. Instructions that change the PC
+ * can't be safely single-stepped in a MP environment, so
+ * we have a lot of work to do:
+ *
+ * In the prepare phase:
+ * *) If it is an instruction that does anything
+ * with the CPU mode, we reject it for a kprobe.
+ * (This is out of laziness rather than need. The
+ * instructions could be simulated.)
+ *
+ * *) Otherwise, decode the instruction rewriting its
+ * registers to take fixed, ordered registers and
+ * setting a handler for it to run the instruction.
+ *
+ * In the execution phase by an instruction's handler:
+ *
+ * *) If the PC is written to by the instruction, the
+ * instruction must be fully simulated in software.
+ * If it is a conditional instruction, the handler
+ * will use insn[0] to copy its condition code to
+ * set r0 to 1 and insn[1] to "mov pc, lr" to return.
+ *
+ * *) Otherwise, a modified form of the instruction is
+ * directly executed. Its handler calls the
+ * instruction in insn[0]. In insn[1] is a
+ * "mov pc, lr" to return.
+ *
+ * Before calling, load up the reordered registers
+ * from the original instruction's registers. If one
+ * of the original input registers is the PC, compute
+ * and adjust the appropriate input register.
+ *
+ * After call completes, copy the output registers to
+ * the original instruction's original registers.
+ *
+ * We don't use a real breakpoint instruction since that
+ * would have us in the kernel go from SVC mode to SVC
+ * mode losing the link register. Instead we use an
+ * undefined instruction. To simplify processing, the
+ * undefined instruction used for kprobes must be reserved
+ * exclusively for kprobes use.
+ *
+ * TODO: ifdef out some instruction decoding based on architecture.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
+
+#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+
+#define PSR_fs (PSR_f|PSR_s)
+
+#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */
+#define SET_R0_TRUE_INSTRUCTION 0xe3a00001 /* mov r0, #1 */
+
+#define truecc_insn(insn) (((insn) & 0xf0000000) | \
+ (SET_R0_TRUE_INSTRUCTION & 0x0fffffff))
+
+typedef long (insn_0arg_fn_t)(void);
+typedef long (insn_1arg_fn_t)(long);
+typedef long (insn_2arg_fn_t)(long, long);
+typedef long (insn_3arg_fn_t)(long, long, long);
+typedef long (insn_4arg_fn_t)(long, long, long, long);
+typedef long long (insn_llret_0arg_fn_t)(void);
+typedef long long (insn_llret_3arg_fn_t)(long, long, long);
+typedef long long (insn_llret_4arg_fn_t)(long, long, long, long);
+
+union reg_pair {
+ long long dr;
+#ifdef __LITTLE_ENDIAN
+ struct { long r0, r1; };
+#else
+ struct { long r1, r0; };
+#endif
+};
+
+/*
+ * For STR and STM instructions, an ARM core may choose to use either
+ * a +8 or a +12 displacement from the current instruction's address.
+ * Whichever value is chosen for a given core, it must be the same for
+ * both instructions and may not change. This function measures it.
+ */
+
+static int str_pc_offset;
+
+static void __init find_str_pc_offset(void)
+{
+ int addr, scratch, ret;
+
+ __asm__ (
+ "sub %[ret], pc, #4 \n\t"
+ "str pc, %[addr] \n\t"
+ "ldr %[scr], %[addr] \n\t"
+ "sub %[ret], %[scr], %[ret] \n\t"
+ : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
+
+ str_pc_offset = ret;
+}
+
+/*
+ * The insnslot_?arg_r[w]flags() functions below are to keep the
+ * msr -> *fn -> mrs instruction sequences indivisible so that
+ * the state of the CPSR flags aren't inadvertently modified
+ * just before or just after the call.
+ */
+
+static inline long __kprobes
+insnslot_0arg_rflags(long cpsr, insn_0arg_fn_t *fn)
+{
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_0arg_rflags(long cpsr, insn_llret_0arg_fn_t *fn)
+{
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret0), "=r" (ret1)
+ : [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+static inline long __kprobes
+insnslot_1arg_rflags(long r0, long cpsr, insn_1arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_2arg_rflags(long r0, long r1, long cpsr, insn_2arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_3arg_rflags(long r0, long r1, long r2, long cpsr, insn_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_3arg_rflags(long r0, long r1, long r2, long cpsr,
+ insn_llret_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret0), "=r" (ret1)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+static inline long __kprobes
+insnslot_4arg_rflags(long r0, long r1, long r2, long r3, long cpsr,
+ insn_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret asm("r0");
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ : "=r" (ret)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [cpsr] "r" (cpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_1arg_rwflags(long r0, long *cpsr, insn_1arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_2arg_rwflags(long r0, long r1, long *cpsr, insn_2arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_3arg_rwflags(long r0, long r1, long r2, long *cpsr,
+ insn_3arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long __kprobes
+insnslot_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
+ insn_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret asm("r0");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ return ret;
+}
+
+static inline long long __kprobes
+insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
+ insn_llret_4arg_fn_t *fn)
+{
+ register long rr0 asm("r0") = r0;
+ register long rr1 asm("r1") = r1;
+ register long rr2 asm("r2") = r2;
+ register long rr3 asm("r3") = r3;
+ register long ret0 asm("r0");
+ register long ret1 asm("r1");
+ long oldcpsr = *cpsr;
+ long newcpsr;
+ union reg_pair fnr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[fn] \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : "=r" (ret0), "=r" (ret1), [newcpsr] "=r" (newcpsr)
+ : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
+ [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
+ : "lr", "cc"
+ );
+ *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
+ fnr.r0 = ret0;
+ fnr.r1 = ret1;
+ return fnr.dr;
+}
+
+/*
+ * To avoid the complications of mimicing single-stepping on a
+ * processor without a Next-PC or a single-step mode, and to
+ * avoid having to deal with the side-effects of boosting, we
+ * simulate or emulate (almost) all ARM instructions.
+ *
+ * "Simulation" is where the instruction's behavior is duplicated in
+ * C code. "Emulation" is where the original instruction is rewritten
+ * and executed, often by altering its registers.
+ *
+ * By having all behavior of the kprobe'd instruction completed before
+ * returning from the kprobe_handler(), all locks (scheduler and
+ * interrupt) can safely be released. There is no need for secondary
+ * breakpoints, no race with MP or preemptable kernels, nor having to
+ * clean up resources counts at a later time impacting overall system
+ * performance. By rewriting the instruction, only the minimum registers
+ * need to be loaded and saved back optimizing performance.
+ *
+ * Calling the insnslot_*_rwflags version of a function doesn't hurt
+ * anything even when the CPSR flags aren't updated by the
+ * instruction. It's just a little slower in return for saving
+ * a little space by not having a duplicate function that doesn't
+ * update the flags. (The same optimization can be said for
+ * instructions that do or don't perform register writeback)
+ * Also, instructions can either read the flags, only write the
+ * flags, or read and write the flags. To save combinations
+ * rather than for sheer performance, flag functions just assume
+ * read and write of flags.
+ */
+
+static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ if (insn & (1 << 24))
+ regs->ARM_lr = iaddr + 4;
+
+ regs->ARM_pc = iaddr + 8 + disp;
+}
+
+static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ regs->ARM_lr = iaddr + 4;
+ regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ if (insn & (1 << 5))
+ regs->ARM_lr = (long)p->addr + 4;
+
+ regs->ARM_pc = rmv & ~0x1;
+ regs->ARM_cpsr &= ~PSR_T_BIT;
+ if (rmv & 0x1)
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ int lbit = insn & (1 << 20);
+ int wbit = insn & (1 << 21);
+ int ubit = insn & (1 << 23);
+ int pbit = insn & (1 << 24);
+ long *addr = (long *)regs->uregs[rn];
+ int reg_bit_vector;
+ int reg_count;
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ reg_count = 0;
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ reg_bit_vector &= (reg_bit_vector - 1);
+ ++reg_count;
+ }
+
+ if (!ubit)
+ addr -= reg_count;
+ addr += (!pbit ^ !ubit);
+
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ int reg = __ffs(reg_bit_vector);
+ reg_bit_vector &= (reg_bit_vector - 1);
+ if (lbit)
+ regs->uregs[reg] = *addr++;
+ else
+ *addr++ = regs->uregs[reg];
+ }
+
+ if (wbit) {
+ if (!ubit)
+ addr -= reg_count;
+ addr -= (!pbit ^ !ubit);
+ regs->uregs[rn] = (long)addr;
+ }
+}
+
+static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+
+ if (!insnslot_1arg_rflags(0, regs->ARM_cpsr, i_fn))
+ return;
+
+ regs->ARM_pc = (long)p->addr + str_pc_offset;
+ simulate_ldm1stm1(p, regs);
+ regs->ARM_pc = (long)p->addr + 4;
+}
+
+static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->uregs[12] = regs->uregs[13];
+}
+
+static void __kprobes emulate_ldcstc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+
+ /* Save Rn in case of writeback. */
+ regs->uregs[rn] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf; /* rm may be invalid, don't care. */
+
+ /* Not following the C calling convention here, so need asm(). */
+ __asm__ __volatile__ (
+ "ldr r0, %[rn] \n\t"
+ "ldr r1, %[rm] \n\t"
+ "msr cpsr_fs, %[cpsr]\n\t"
+ "mov lr, pc \n\t"
+ "mov pc, %[i_fn] \n\t"
+ "str r0, %[rn] \n\t" /* in case of writeback */
+ "str r2, %[rd0] \n\t"
+ "str r3, %[rd1] \n\t"
+ : [rn] "+m" (regs->uregs[rn]),
+ [rd0] "=m" (regs->uregs[rd]),
+ [rd1] "=m" (regs->uregs[rd+1])
+ : [rm] "m" (regs->uregs[rm]),
+ [cpsr] "r" (regs->ARM_cpsr),
+ [i_fn] "r" (i_fn)
+ : "r0", "r1", "r2", "r3", "lr", "cc"
+ );
+}
+
+static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+
+ regs->uregs[rn] = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
+ regs->uregs[rd+1],
+ regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rdv;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+ long cpsr = regs->ARM_cpsr;
+
+ fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
+ regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */
+ rdv = fnr.r1;
+
+ if (rd == 15) {
+#if __LINUX_ARM_ARCH__ >= 5
+ cpsr &= ~PSR_T_BIT;
+ if (rdv & 0x1)
+ cpsr |= PSR_T_BIT;
+ regs->ARM_cpsr = cpsr;
+ rdv &= ~0x1;
+#else
+ rdv &= ~0x2;
+#endif
+ }
+ regs->uregs[rd] = rdv;
+}
+
+static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
+ long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn];
+ long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+
+ /* Save Rn in case of writeback. */
+ regs->uregs[rn] =
+ insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_mrrc(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_0arg_fn_t *i_fn = (insn_llret_0arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+
+ fnr.dr = insnslot_llret_0arg_rflags(regs->ARM_cpsr, i_fn);
+ regs->uregs[rn] = fnr.r0;
+ regs->uregs[rd] = fnr.r1;
+}
+
+static void __kprobes emulate_mcrr(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+ long rdv = regs->uregs[rd];
+
+ insnslot_2arg_rflags(rnv, rdv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ /* Writes Q flag */
+ regs->uregs[rd] = insnslot_1arg_rwflags(rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_sel(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm];
+
+ /* Reads GE bits */
+ regs->uregs[rd] = insnslot_2arg_rflags(rnv, rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
+
+ insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rd12(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+
+ regs->uregs[rd] = insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_ird12(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int ird = (insn >> 12) & 0xf;
+
+ insnslot_1arg_rflags(regs->uregs[ird], regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rn16(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = regs->uregs[rn];
+
+ insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] = insnslot_1arg_rflags(rmv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd12rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_2arg_rwflags(rnv, rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd16rn12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 16) & 0xf;
+ int rn = (insn >> 12) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rnv = regs->uregs[rn];
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rwflags(rnv, rsv, rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rd16rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 16) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ regs->uregs[rd] =
+ insnslot_2arg_rwflags(rsv, rmv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_rdhi16rdlo12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_llret_4arg_fn_t *i_fn = (insn_llret_4arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ union reg_pair fnr;
+ int rdhi = (insn >> 16) & 0xf;
+ int rdlo = (insn >> 12) & 0xf;
+ int rs = (insn >> 8) & 0xf;
+ int rm = insn & 0xf;
+ long rsv = regs->uregs[rs];
+ long rmv = regs->uregs[rm];
+
+ fnr.dr = insnslot_llret_4arg_rwflags(regs->uregs[rdhi],
+ regs->uregs[rdlo], rsv, rmv,
+ &regs->ARM_cpsr, i_fn);
+ regs->uregs[rdhi] = fnr.r0;
+ regs->uregs[rdlo] = fnr.r1;
+}
+
+static void __kprobes
+emulate_alu_imm_rflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ regs->uregs[rd] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
+
+ regs->uregs[rd] = insnslot_1arg_rwflags(rnv, &regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
+ int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rflags(rnv, rmv, rsv, regs->ARM_cpsr, i_fn);
+}
+
+static void __kprobes
+emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
+ kprobe_opcode_t insn = p->opcode;
+ long ppc = (long)p->addr + 8;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
+ int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
+ int rm = insn & 0xf;
+ long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+ long rmv = (rm == 15) ? ppc : regs->uregs[rm];
+ long rsv = regs->uregs[rs];
+
+ regs->uregs[rd] =
+ insnslot_3arg_rwflags(rnv, rmv, rsv, &regs->ARM_cpsr, i_fn);
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ int ibit = (insn & (1 << 26)) ? 25 : 22;
+
+ insn &= 0xfff00fff;
+ insn |= 0x00001000; /* Rn = r0, Rd = r1 */
+ if (insn & (1 << ibit)) {
+ insn &= ~0xf;
+ insn |= 2; /* Rm = r2 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_ldr : emulate_str;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rm0;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd12rn16rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd16rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000102; /* Rs = r1, Rm = r2 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rd16rn12rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
+ struct arch_specific_insn *asi)
+{
+ insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */
+ insn |= 0x00001203; /* Rs = r2, Rm = r3 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rdhi16rdlo12rs8rm0_rwflags;
+ return INSN_GOOD;
+}
+
+/*
+ * For the instruction masking and comparisons in all the "space_*"
+ * functions below, Do _not_ rearrange the order of tests unless
+ * you're very, very sure of what you are doing. For the sake of
+ * efficiency, the masks for some tests sometimes assume other test
+ * have been done prior to them so the number of patterns to test
+ * for an instruction set can be as broad as possible to reduce the
+ * number of tests needed.
+ */
+
+static enum kprobe_insn __kprobes
+space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* CPS mmod == 1 : 1111 0001 0000 xx10 xxxx xxxx xx0x xxxx */
+ /* RFE : 1111 100x x0x1 xxxx xxxx 1010 xxxx xxxx */
+ /* SRS : 1111 100x x1x0 1101 xxxx 0101 xxxx xxxx */
+ if ((insn & 0xfff30020) == 0xf1020000 ||
+ (insn & 0xfe500f00) == 0xf8100a00 ||
+ (insn & 0xfe5f0f00) == 0xf84d0500)
+ return INSN_REJECTED;
+
+ /* PLD : 1111 01x1 x101 xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfd700000) == 0xf4500000) {
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_rn16;
+ return INSN_GOOD;
+ }
+
+ /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */
+ if ((insn & 0xfe000000) == 0xfa000000) {
+ asi->insn_handler = simulate_blx1;
+ return INSN_GOOD_NO_SLOT;
+ }
+
+ /* SETEND : 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+ /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0xffff00f0) == 0xf1010000 ||
+ (insn & 0xff000010) == 0xfe000000) {
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ }
+
+ /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
+ /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
+ if ((insn & 0xffe00000) == 0xfc400000) {
+ insn &= 0xfff00fff; /* Rn = r0 */
+ insn |= 0x00001000; /* Rd = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler =
+ (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
+ return INSN_GOOD;
+ }
+
+ /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0xfe000000) == 0xfc000000) {
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_ldcstc;
+ return INSN_GOOD;
+ }
+
+ /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0x0f900010) == 0x01000000) {
+
+ /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+ /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01200020 ||
+ (insn & 0x0fb000f0) == 0x01200000)
+ return INSN_REJECTED;
+
+ /* MRS : cccc 0001 0x00 xxxx xxxx xxxx 0000 xxxx */
+ if ((insn & 0x0fb00010) == 0x01000000)
+ return prep_emulate_rd12(insn, asi);
+
+ /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
+ if ((insn & 0x0ff00090) == 0x01400080)
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+
+ /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
+ /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
+ if ((insn & 0x0ff000b0) == 0x012000a0 ||
+ (insn & 0x0ff00090) == 0x01600080)
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+
+ /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */
+ /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 0x00 xxxx : Q */
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ }
+
+ /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */
+ else if ((insn & 0x0f900090) == 0x01000010) {
+
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ if ((insn & 0xfff000f0) == 0xe1200070)
+ return INSN_REJECTED;
+
+ /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
+ /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
+ if ((insn & 0x0ff000d0) == 0x01200010) {
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = simulate_blx2bx;
+ return INSN_GOOD;
+ }
+
+ /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
+ if ((insn & 0x0ff000f0) == 0x01600010)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* QADD : cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */
+ /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ }
+
+ /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */
+ else if ((insn & 0x0f000090) == 0x00000090) {
+
+ /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */
+ /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */
+ /* UMLALS : cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* SMULL : cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx : */
+ /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */
+ /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */
+ /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */
+ if ((insn & 0x0fe000f0) == 0x00000090) {
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+ } else if ((insn & 0x0fe000f0) == 0x00200090) {
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+ } else {
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+ }
+ }
+
+ /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */
+ else if ((insn & 0x0e000090) == 0x00000090) {
+
+ /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */
+ /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */
+ /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
+ /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
+ /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */
+ /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */
+ /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */
+ /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */
+ /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */
+ /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */
+ if ((insn & 0x0fb000f0) == 0x01000090) {
+ /* SWP/SWPB */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+ } else if ((insn & 0x0e1000d0) == 0x00000d0) {
+ /* STRD/LDRD */
+ insn &= 0xfff00fff;
+ insn |= 0x00002000; /* Rn = r0, Rd = r2 */
+ if (insn & (1 << 22)) {
+ /* I bit */
+ insn &= ~0xf;
+ insn |= 1; /* Rm = r1 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler =
+ (insn & (1 << 5)) ? emulate_strd : emulate_ldrd;
+ return INSN_GOOD;
+ }
+
+ return prep_emulate_ldr_str(insn, asi);
+ }
+
+ /* cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx xxxx */
+
+ /*
+ * ALU op with S bit and Rd == 15 :
+ * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
+ */
+ if ((insn & 0x0e10f000) == 0x0010f000)
+ return INSN_REJECTED;
+
+ /*
+ * "mov ip, sp" is the most common kprobe'd instruction by far.
+ * Check and optimize for it explicitly.
+ */
+ if (insn == 0xe1a0c00d) {
+ asi->insn_handler = simulate_mov_ipsp;
+ return INSN_GOOD_NO_SLOT;
+ }
+
+ /*
+ * Data processing: Immediate-shift / Register-shift
+ * ALU op : cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx
+ * CPY : cccc 0001 1010 xxxx xxxx 0000 0000 xxxx
+ * MOV : cccc 0001 101x xxxx xxxx xxxx xxxx xxxx
+ * *S (bit 20) updates condition codes
+ * ADC/SBC/RSC reads the C flag
+ */
+ insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ if (insn & 0x010) {
+ insn &= 0xfffff0ff; /* register shift */
+ insn |= 0x00000200; /* Rs = r2 */
+ }
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+ emulate_alu_rwflags : emulate_alu_rflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /*
+ * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
+ * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx
+ * ALU op with S bit and Rd == 15 :
+ * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
+ */
+ if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */
+ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
+ return INSN_REJECTED;
+
+ /*
+ * Data processing: 32-bit Immediate
+ * ALU op : cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
+ * MOV : cccc 0011 101x xxxx xxxx xxxx xxxx xxxx
+ * *S (bit 20) updates condition codes
+ * ADC/SBC/RSC reads the C flag
+ */
+ insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
+ emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */
+ if ((insn & 0x0ff000f0) == 0x068000b0) {
+ insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
+ insn |= 0x00000001; /* Rm = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_sel;
+ return INSN_GOOD;
+ }
+
+ /* SSAT : cccc 0110 101x xxxx xxxx xxxx xx01 xxxx :Q */
+ /* USAT : cccc 0110 111x xxxx xxxx xxxx xx01 xxxx :Q */
+ /* SSAT16 : cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx :Q */
+ /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */
+ if ((insn & 0x0fa00030) == 0x06a00010 ||
+ (insn & 0x0fb000f0) == 0x06a00030) {
+ insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_sat;
+ return INSN_GOOD;
+ }
+
+ /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
+ /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+ /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
+ if ((insn & 0x0ff00070) == 0x06b00030 ||
+ (insn & 0x0ff000f0) == 0x06f000b0)
+ return prep_emulate_rd12rm0(insn, asi);
+
+ /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */
+ /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */
+ /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */
+ /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */
+ /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */
+ /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */
+ /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */
+ /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */
+ /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */
+ /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */
+ /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */
+ /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */
+ /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */
+ /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */
+ /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */
+ /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */
+ /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */
+ /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */
+ /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */
+ /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */
+ /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */
+ /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */
+ /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */
+ /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */
+ /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */
+ /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */
+ /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */
+ /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */
+ /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */
+ /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */
+ /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */
+ /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */
+ /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */
+ /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */
+ /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */
+ /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */
+ /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
+ /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */
+ /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */
+ return prep_emulate_rd12rn16rm0_wflags(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* Undef : cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
+ if ((insn & 0x0ff000f0) == 0x03f000f0)
+ return INSN_REJECTED;
+
+ /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
+ /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
+ if ((insn & 0x0ff000f0) == 0x07800010)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
+ /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
+ if ((insn & 0x0ff00090) == 0x07400010)
+ return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
+
+ /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */
+ /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */
+ /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */
+ /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
+ if ((insn & 0x0ff00090) == 0x07000010 ||
+ (insn & 0x0ff000d0) == 0x07500010 ||
+ (insn & 0x0ff000d0) == 0x075000d0)
+ return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
+
+ /* SMUSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx : */
+ /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
+ /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
+ return prep_emulate_rd16rs8rm0_wflags(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDR : cccc 01xx x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRB : cccc 01xx x1x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRBT : cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRT : cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
+ /* STR : cccc 01xx x0x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
+ /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+ return prep_emulate_ldr_str(insn, asi);
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDM(2) : cccc 100x x101 xxxx 0xxx xxxx xxxx xxxx */
+ /* LDM(3) : cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
+ if ((insn & 0x0e708000) == 0x85000000 ||
+ (insn & 0x0e508000) == 0x85010000)
+ return INSN_REJECTED;
+
+ /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */
+ simulate_stm1_pc : simulate_ldm1stm1;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
+ /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
+ asi->insn[0] = truecc_insn(insn);
+ asi->insn_handler = simulate_bbl;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_1100_010x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
+ /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
+ insn &= 0xfff00fff;
+ insn |= 0x00001000; /* Rn = r0, Rd = r1 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_mrrc : emulate_mcrr;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_110x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ insn &= 0xfff0ffff; /* Rn = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_ldcstc;
+ return INSN_GOOD;
+}
+
+static enum kprobe_insn __kprobes
+space_cccc_111x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ /* SWI : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+ if ((insn & 0xfff000f0) == 0xe1200070 ||
+ (insn & 0x0f000000) == 0x0f000000)
+ return INSN_REJECTED;
+
+ /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ if ((insn & 0x0f000010) == 0x0e000000) {
+ asi->insn[0] = insn;
+ asi->insn_handler = emulate_none;
+ return INSN_GOOD;
+ }
+
+ /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+ insn &= 0xffff0fff; /* Rd = r0 */
+ asi->insn[0] = insn;
+ asi->insn_handler = (insn & (1 << 20)) ? emulate_rd12 : emulate_ird12;
+ return INSN_GOOD;
+}
+
+/* Return:
+ * INSN_REJECTED If instruction is one not allowed to kprobe,
+ * INSN_GOOD If instruction is supported and uses instruction slot,
+ * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ *
+ * For instructions we don't want to kprobe (INSN_REJECTED return result):
+ * These are generally ones that modify the processor state making
+ * them "hard" to simulate such as switches processor modes or
+ * make accesses in alternate modes. Any of these could be simulated
+ * if the work was put into it, but low return considering they
+ * should also be very rare.
+ */
+enum kprobe_insn __kprobes
+arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ asi->insn[1] = KPROBE_RETURN_INSTRUCTION;
+
+ if ((insn & 0xf0000000) == 0xf0000000) {
+
+ return space_1111(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x00000000) {
+
+ return space_cccc_000x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x02000000) {
+
+ return space_cccc_001x(insn, asi);
+
+ } else if ((insn & 0x0f000010) == 0x06000010) {
+
+ return space_cccc_0110__1(insn, asi);
+
+ } else if ((insn & 0x0f000010) == 0x07000010) {
+
+ return space_cccc_0111__1(insn, asi);
+
+ } else if ((insn & 0x0c000000) == 0x04000000) {
+
+ return space_cccc_01xx(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x08000000) {
+
+ return space_cccc_100x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x0a000000) {
+
+ return space_cccc_101x(insn, asi);
+
+ } else if ((insn & 0x0fe00000) == 0x0c400000) {
+
+ return space_cccc_1100_010x(insn, asi);
+
+ } else if ((insn & 0x0e000000) == 0x0c400000) {
+
+ return space_cccc_110x(insn, asi);
+
+ }
+
+ return space_cccc_111x(insn, asi);
+}
+
+void __init arm_kprobe_decode_init(void)
+{
+ find_str_pc_offset();
+}
+
+
+/*
+ * All ARM instructions listed below.
+ *
+ * Instructions and their general purpose registers are given.
+ * If a particular register may not use R15, it is prefixed with a "!".
+ * If marked with a "*" means the value returned by reading R15
+ * is implementation defined.
+ *
+ * ADC/ADD/AND/BIC/CMN/CMP/EOR/MOV/MVN/ORR/RSB/RSC/SBC/SUB/TEQ
+ * TST: Rd, Rn, Rm, !Rs
+ * BX: Rm
+ * BLX(2): !Rm
+ * BX: Rm (R15 legal, but discouraged)
+ * BXJ: !Rm,
+ * CLZ: !Rd, !Rm
+ * CPY: Rd, Rm
+ * LDC/2,STC/2 immediate offset & unindex: Rn
+ * LDC/2,STC/2 immediate pre/post-indexed: !Rn
+ * LDM(1/3): !Rn, register_list
+ * LDM(2): !Rn, !register_list
+ * LDR,STR,PLD immediate offset: Rd, Rn
+ * LDR,STR,PLD register offset: Rd, Rn, !Rm
+ * LDR,STR,PLD scaled register offset: Rd, !Rn, !Rm
+ * LDR,STR immediate pre/post-indexed: Rd, !Rn
+ * LDR,STR register pre/post-indexed: Rd, !Rn, !Rm
+ * LDR,STR scaled register pre/post-indexed: Rd, !Rn, !Rm
+ * LDRB,STRB immediate offset: !Rd, Rn
+ * LDRB,STRB register offset: !Rd, Rn, !Rm
+ * LDRB,STRB scaled register offset: !Rd, !Rn, !Rm
+ * LDRB,STRB immediate pre/post-indexed: !Rd, !Rn
+ * LDRB,STRB register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRB,STRB scaled register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRT,LDRBT,STRBT immediate pre/post-indexed: !Rd, !Rn
+ * LDRT,LDRBT,STRBT register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRT,LDRBT,STRBT scaled register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDRH/SH/SB/D,STRH/SH/SB/D immediate offset: !Rd, Rn
+ * LDRH/SH/SB/D,STRH/SH/SB/D register offset: !Rd, Rn, !Rm
+ * LDRH/SH/SB/D,STRH/SH/SB/D immediate pre/post-indexed: !Rd, !Rn
+ * LDRH/SH/SB/D,STRH/SH/SB/D register pre/post-indexed: !Rd, !Rn, !Rm
+ * LDREX: !Rd, !Rn
+ * MCR/2: !Rd
+ * MCRR/2,MRRC/2: !Rd, !Rn
+ * MLA: !Rd, !Rn, !Rm, !Rs
+ * MOV: Rd
+ * MRC/2: !Rd (if Rd==15, only changes cond codes, not the register)
+ * MRS,MSR: !Rd
+ * MUL: !Rd, !Rm, !Rs
+ * PKH{BT,TB}: !Rd, !Rn, !Rm
+ * QDADD,[U]QADD/16/8/SUBX: !Rd, !Rm, !Rn
+ * QDSUB,[U]QSUB/16/8/ADDX: !Rd, !Rm, !Rn
+ * REV/16/SH: !Rd, !Rm
+ * RFE: !Rn
+ * {S,U}[H]ADD{16,8,SUBX},{S,U}[H]SUB{16,8,ADDX}: !Rd, !Rn, !Rm
+ * SEL: !Rd, !Rn, !Rm
+ * SMLA<x><y>,SMLA{D,W<y>},SMLSD,SMML{A,S}: !Rd, !Rn, !Rm, !Rs
+ * SMLAL<x><y>,SMLA{D,LD},SMLSLD,SMMULL,SMULW<y>: !RdHi, !RdLo, !Rm, !Rs
+ * SMMUL,SMUAD,SMUL<x><y>,SMUSD: !Rd, !Rm, !Rs
+ * SSAT/16: !Rd, !Rm
+ * STM(1/2): !Rn, register_list* (R15 in reg list not recommended)
+ * STRT immediate pre/post-indexed: Rd*, !Rn
+ * STRT register pre/post-indexed: Rd*, !Rn, !Rm
+ * STRT scaled register pre/post-indexed: Rd*, !Rn, !Rm
+ * STREX: !Rd, !Rn, !Rm
+ * SWP/B: !Rd, !Rn, !Rm
+ * {S,U}XTA{B,B16,H}: !Rd, !Rn, !Rm
+ * {S,U}XT{B,B16,H}: !Rd, !Rm
+ * UM{AA,LA,UL}L: !RdHi, !RdLo, !Rm, !Rs
+ * USA{D8,A8,T,T16}: !Rd, !Rm, !Rs
+ *
+ * May transfer control by writing R15 (possible mode changes or alternate
+ * mode accesses marked by "*"):
+ * ALU op (* with s-bit), B, BL, BKPT, BLX(1/2), BX, BXJ, CPS*, CPY,
+ * LDM(1), LDM(2/3)*, LDR, MOV, RFE*, SWI*
+ *
+ * Instructions that do not take general registers, nor transfer control:
+ * CDP/2, SETEND, SRS*
+ */
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
new file mode 100644
index 00000000000..a22a98c43ca
--- /dev/null
+++ b/arch/arm/kernel/kprobes.c
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/kernel/kprobes.c
+ *
+ * Kprobes on ARM
+ *
+ * Abhishek Sagar <sagar.abhishek@gmail.com>
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * Nicolas Pitre <nico@marvell.com>
+ * Copyright (C) 2007 Marvell Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include <asm/traps.h>
+#include <asm/cacheflush.h>
+
+#define MIN_STACK_SIZE(addr) \
+ min((unsigned long)MAX_STACK_SIZE, \
+ (unsigned long)current_thread_info() + THREAD_START_SP - (addr))
+
+#define flush_insns(addr, cnt) \
+ flush_icache_range((unsigned long)(addr), \
+ (unsigned long)(addr) + \
+ sizeof(kprobe_opcode_t) * (cnt))
+
+/* Used as a marker in ARM_pc to note when we're in a jprobe. */
+#define JPROBE_MAGIC_ADDR 0xffffffff
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ kprobe_opcode_t insn;
+ kprobe_opcode_t tmp_insn[MAX_INSN_SIZE];
+ unsigned long addr = (unsigned long)p->addr;
+ int is;
+
+ if (addr & 0x3 || in_exception_text(addr))
+ return -EINVAL;
+
+ insn = *p->addr;
+ p->opcode = insn;
+ p->ainsn.insn = tmp_insn;
+
+ switch (arm_kprobe_decode_insn(insn, &p->ainsn)) {
+ case INSN_REJECTED: /* not supported */
+ return -EINVAL;
+
+ case INSN_GOOD: /* instruction uses slot */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn)
+ return -ENOMEM;
+ for (is = 0; is < MAX_INSN_SIZE; ++is)
+ p->ainsn.insn[is] = tmp_insn[is];
+ flush_insns(&p->ainsn.insn, MAX_INSN_SIZE);
+ break;
+
+ case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */
+ p->ainsn.insn = NULL;
+ break;
+ }
+
+ return 0;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ *p->addr = KPROBE_BREAKPOINT_INSTRUCTION;
+ flush_insns(p->addr, 1);
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ *p->addr = p->opcode;
+ flush_insns(p->addr, 1);
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ if (p->ainsn.insn) {
+ mutex_lock(&kprobe_mutex);
+ free_insn_slot(p->ainsn.insn, 0);
+ mutex_unlock(&kprobe_mutex);
+ p->ainsn.insn = NULL;
+ }
+}
+
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
+}
+
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ kcb->kprobe_status = kcb->prev_kprobe.status;
+}
+
+static void __kprobes set_current_kprobe(struct kprobe *p)
+{
+ __get_cpu_var(current_kprobe) = p;
+}
+
+static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ regs->ARM_pc += 4;
+ p->ainsn.insn_handler(p, regs);
+}
+
+/*
+ * Called with IRQs disabled. IRQs must remain disabled from that point
+ * all the way until processing this kprobe is complete. The current
+ * kprobes implementation cannot process more than one nested level of
+ * kprobe, and that level is reserved for user kprobe handlers, so we can't
+ * risk encountering a new kprobe in an interrupt handler.
+ */
+void __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p, *cur;
+ struct kprobe_ctlblk *kcb;
+ kprobe_opcode_t *addr = (kprobe_opcode_t *)regs->ARM_pc;
+
+ kcb = get_kprobe_ctlblk();
+ cur = kprobe_running();
+ p = get_kprobe(addr);
+
+ if (p) {
+ if (cur) {
+ /* Kprobe is pending, so we're recursing. */
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /* A pre- or post-handler probe got us here. */
+ kprobes_inc_nmissed_count(p);
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_REENTER;
+ singlestep(p, regs, kcb);
+ restore_previous_kprobe(kcb);
+ break;
+ default:
+ /* impossible cases */
+ BUG();
+ }
+ } else {
+ set_current_kprobe(p);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+ /*
+ * If we have no pre-handler or it returned 0, we
+ * continue with normal processing. If we have a
+ * pre-handler and it returned non-zero, it prepped
+ * for calling the break_handler below on re-entry,
+ * so get out doing nothing more here.
+ */
+ if (!p->pre_handler || !p->pre_handler(p, regs)) {
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ singlestep(p, regs, kcb);
+ if (p->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ p->post_handler(p, regs, 0);
+ }
+ reset_current_kprobe();
+ }
+ }
+ } else if (cur) {
+ /* We probably hit a jprobe. Call its break handler. */
+ if (cur->break_handler && cur->break_handler(cur, regs)) {
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ singlestep(cur, regs, kcb);
+ if (cur->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ cur->post_handler(cur, regs, 0);
+ }
+ }
+ reset_current_kprobe();
+ } else {
+ /*
+ * The probe was removed and a race is in progress.
+ * There is nothing we can do about it. Let's restart
+ * the instruction. By the time we can restart, the
+ * real instruction will be there.
+ */
+ }
+}
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr)
+{
+ kprobe_handler(regs);
+ return 0;
+}
+
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SS:
+ case KPROBE_REENTER:
+ /*
+ * We are here because the instruction being single
+ * stepped caused a page fault. We reset the current
+ * kprobe and the PC to point back to the probe address
+ * and allow the page fault handler to continue as a
+ * normal page fault.
+ */
+ regs->ARM_pc = (long)cur->addr;
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
+ } else {
+ reset_current_kprobe();
+ }
+ break;
+
+ case KPROBE_HIT_ACTIVE:
+ case KPROBE_HIT_SSDONE:
+ /*
+ * We increment the nmissed count for accounting,
+ * we can also use npre/npostfault count for accounting
+ * these specific fault cases.
+ */
+ kprobes_inc_nmissed_count(cur);
+
+ /*
+ * We come here because instructions in the pre/post
+ * handler caused the page_fault, this could happen
+ * if handler tries to access user space by
+ * copy_from_user(), get_user() etc. Let the
+ * user-specified handler try to fix it.
+ */
+ if (cur->fault_handler && cur->fault_handler(cur, regs, fsr))
+ return 1;
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ /*
+ * notify_die() is currently never called on ARM,
+ * so this callback is currently empty.
+ */
+ return NOTIFY_DONE;
+}
+
+/*
+ * When a retprobed function returns, trampoline_handler() is called,
+ * calling the kretprobe's handler. We construct a struct pt_regs to
+ * give a view of registers r0-r11 to the user return-handler. This is
+ * not a complete pt_regs structure, but that should be plenty sufficient
+ * for kretprobe handlers which should normally be interested in r0 only
+ * anyway.
+ */
+static void __attribute__((naked)) __kprobes kretprobe_trampoline(void)
+{
+ __asm__ __volatile__ (
+ "stmdb sp!, {r0 - r11} \n\t"
+ "mov r0, sp \n\t"
+ "bl trampoline_handler \n\t"
+ "mov lr, r0 \n\t"
+ "ldmia sp!, {r0 - r11} \n\t"
+ "mov pc, lr \n\t"
+ : : : "memory");
+}
+
+/* Called from kretprobe_trampoline */
+static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
+{
+ struct kretprobe_instance *ri = NULL;
+ struct hlist_head *head, empty_rp;
+ struct hlist_node *node, *tmp;
+ unsigned long flags, orig_ret_address = 0;
+ unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+
+ INIT_HLIST_HEAD(&empty_rp);
+ spin_lock_irqsave(&kretprobe_lock, flags);
+ head = kretprobe_inst_table_head(current);
+
+ /*
+ * It is possible to have multiple instances associated with a given
+ * task either because multiple functions in the call path have
+ * a return probe installed on them, and/or more than one return
+ * probe was registered for a target function.
+ *
+ * We can handle this because:
+ * - instances are always inserted at the head of the list
+ * - when multiple return probes are registered for the same
+ * function, the first instance's ret_addr will point to the
+ * real return address, and all the rest will point to
+ * kretprobe_trampoline
+ */
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ if (ri->rp && ri->rp->handler) {
+ __get_cpu_var(current_kprobe) = &ri->rp->kp;
+ get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+ ri->rp->handler(ri, regs);
+ __get_cpu_var(current_kprobe) = NULL;
+ }
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
+ recycle_rp_inst(ri, &empty_rp);
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+ spin_unlock_irqrestore(&kretprobe_lock, flags);
+
+ hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
+ hlist_del(&ri->hlist);
+ kfree(ri);
+ }
+
+ return (void *)orig_ret_address;
+}
+
+/* Called with kretprobe_lock held. */
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+ struct pt_regs *regs)
+{
+ ri->ret_addr = (kprobe_opcode_t *)regs->ARM_lr;
+
+ /* Replace the return addr with trampoline addr. */
+ regs->ARM_lr = (unsigned long)&kretprobe_trampoline;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long sp_addr = regs->ARM_sp;
+
+ kcb->jprobe_saved_regs = *regs;
+ memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
+ regs->ARM_pc = (long)jp->entry;
+ regs->ARM_cpsr |= PSR_I_BIT;
+ preempt_disable();
+ return 1;
+}
+
+void __kprobes jprobe_return(void)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ __asm__ __volatile__ (
+ /*
+ * Setup an empty pt_regs. Fill SP and PC fields as
+ * they're needed by longjmp_break_handler.
+ */
+ "sub sp, %0, %1 \n\t"
+ "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
+ "str %0, [sp, %2] \n\t"
+ "str r0, [sp, %3] \n\t"
+ "mov r0, sp \n\t"
+ "bl kprobe_handler \n\t"
+
+ /*
+ * Return to the context saved by setjmp_pre_handler
+ * and restored by longjmp_break_handler.
+ */
+ "ldr r0, [sp, %4] \n\t"
+ "msr cpsr_cxsf, r0 \n\t"
+ "ldmia sp, {r0 - pc} \n\t"
+ :
+ : "r" (kcb->jprobe_saved_regs.ARM_sp),
+ "I" (sizeof(struct pt_regs)),
+ "J" (offsetof(struct pt_regs, ARM_sp)),
+ "J" (offsetof(struct pt_regs, ARM_pc)),
+ "J" (offsetof(struct pt_regs, ARM_cpsr))
+ : "memory", "cc");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ long stack_addr = kcb->jprobe_saved_regs.ARM_sp;
+ long orig_sp = regs->ARM_sp;
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+
+ if (regs->ARM_pc == JPROBE_MAGIC_ADDR) {
+ if (orig_sp != stack_addr) {
+ struct pt_regs *saved_regs =
+ (struct pt_regs *)kcb->jprobe_saved_regs.ARM_sp;
+ printk("current sp %lx does not match saved sp %lx\n",
+ orig_sp, stack_addr);
+ printk("Saved registers for jprobe %p\n", jp);
+ show_regs(saved_regs);
+ printk("Current registers\n");
+ show_regs(regs);
+ BUG();
+ }
+ *regs = kcb->jprobe_saved_regs;
+ memcpy((void *)stack_addr, kcb->jprobes_stack,
+ MIN_STACK_SIZE(stack_addr));
+ preempt_enable_no_resched();
+ return 1;
+ }
+ return 0;
+}
+
+static struct undef_hook kprobes_break_hook = {
+ .instr_mask = 0xffffffff,
+ .instr_val = KPROBE_BREAKPOINT_INSTRUCTION,
+ .cpsr_mask = MODE_MASK,
+ .cpsr_val = SVC_MODE,
+ .fn = kprobe_trap_handler,
+};
+
+int __init arch_init_kprobes()
+{
+ arm_kprobe_decode_init();
+ register_undef_hook(&kprobes_break_hook);
+ return 0;
+}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index c34db4e868f..5595fdd75e8 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -19,6 +19,7 @@
#include <linux/kallsyms.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/kprobes.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
@@ -46,15 +47,6 @@ __setup("user_debug=", user_debug_setup);
static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
-static inline int in_exception_text(unsigned long ptr)
-{
- extern char __exception_text_start[];
- extern char __exception_text_end[];
-
- return ptr >= (unsigned long)&__exception_text_start &&
- ptr < (unsigned long)&__exception_text_end;
-}
-
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
@@ -322,6 +314,17 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
get_user(instr, (u32 __user *)pc);
}
+#ifdef CONFIG_KPROBES
+ /*
+ * It is possible to have recursive kprobes, so we can't call
+ * the kprobe trap handler with the undef_lock held.
+ */
+ if (instr == KPROBE_BREAKPOINT_INSTRUCTION && !user_mode(regs)) {
+ kprobe_trap_handler(regs, instr);
+ return;
+ }
+#endif
+
spin_lock_irqsave(&undef_lock, flags);
list_for_each_entry(hook, &undef_hook, node) {
if ((instr & hook->instr_mask) == hook->instr_val &&
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 5ff5406666b..30f732c7fdb 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -94,6 +94,7 @@ SECTIONS
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
+ KPROBES_TEXT
#ifdef CONFIG_MMU
*(.fixup)
#endif
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 05a9f8a1b45..5b0422cdde7 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -22,6 +22,9 @@ config ARCH_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
+config ARCH_AT91CAP9
+ bool "AT91CAP9"
+
config ARCH_AT91X40
bool "AT91x40"
@@ -178,6 +181,21 @@ endif
# ----------------------------------------------------------
+if ARCH_AT91CAP9
+
+comment "AT91CAP9 Board Type"
+
+config MACH_AT91CAP9ADK
+ bool "Atmel AT91CAP9A-DK Evaluation Kit"
+ depends on ARCH_AT91CAP9
+ help
+ Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
+
+endif
+
+# ----------------------------------------------------------
+
if ARCH_AT91X40
comment "AT91X40 Board Type"
@@ -198,13 +216,13 @@ comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
@@ -219,6 +237,22 @@ config AT91_PROGRAMMABLE_CLOCKS
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
+config AT91_TIMER_HZ
+ int "Kernel HZ (jiffies per second)"
+ range 32 1024
+ depends on ARCH_AT91
+ default "128" if ARCH_AT91RM9200
+ default "100"
+ help
+ On AT91rm9200 chips where you're using a system clock derived
+ from the 32768 Hz hardware clock, this tick rate should divide
+ it exactly: use a power-of-two value, such as 128 or 256, to
+ reduce timing errors caused by rounding.
+
+ On AT91sam926x chips, or otherwise when using a higher precision
+ system clock (of at least several MHz), rounding is less of a
+ problem so it can be safer to use a decimal values like 100.
+
endmenu
endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a21f08c64ea..bf5f293dccf 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -8,7 +8,6 @@ obj-n :=
obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
-obj-$(CONFIG_PM) += pm.o
# CPU-specific support
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
@@ -16,6 +15,7 @@ obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_d
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
+obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -29,7 +29,6 @@ obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
obj-$(CONFIG_MACH_KAFA) += board-kafa.o
obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
-obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
# AT91SAM9260 board-specific support
obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -43,19 +42,17 @@ obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
# AT91SAM9RL board-specific support
obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-# LEDs support
-led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
-led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
-led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
-led-$(CONFIG_MACH_CSB337) += leds.o
-led-$(CONFIG_MACH_CSB637) += leds.o
-led-$(CONFIG_MACH_KB9200) += leds.o
-led-$(CONFIG_MACH_KAFA) += leds.o
-obj-$(CONFIG_LEDS) += $(led-y)
+# AT91CAP9 board-specific support
+obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-# VGA support
-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
+# AT91X40 board-specific support
+obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
+# Drivers
+obj-y += leds.o
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index e667dcc7cd3..071a2506a69 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,7 +3,12 @@
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
+ifeq ($(CONFIG_ARCH_AT91CAP9),y)
+ zreladdr-y := 0x70008000
+params_phys-y := 0x70000100
+initrd_phys-y := 0x70410000
+else
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
-
+endif
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
new file mode 100644
index 00000000000..48d27d8000b
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-at91/at91cap9.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91cap9_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE,
+ .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE),
+ .length = AT91CAP9_SRAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioABCD_clk = {
+ .name = "pioABCD_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PIOABCD,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb0_clk = {
+ .name = "mpb0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb1_clk = {
+ .name = "mpb1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb2_clk = {
+ .name = "mpb2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb3_clk = {
+ .name = "mpb3_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mpb4_clk = {
+ .name = "mpb4_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MPB4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk can_clk = {
+ .name = "can_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_CAN,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+ .name = "ssc0_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+ .name = "ssc1_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_SSC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+ .name = "ac97_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AC97C,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+ .name = "pwmc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_PWMC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk aestdes_clk = {
+ .name = "aestdes_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_AESTDES,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+ .name = "adc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ADC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_LCDC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+ .name = "dma_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_DMA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+ .name = "udphs_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UDPHS,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91CAP9_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioABCD_clk,
+ &mpb0_clk,
+ &mpb1_clk,
+ &mpb2_clk,
+ &mpb3_clk,
+ &mpb4_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ &can_clk,
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ &ssc0_clk,
+ &ssc1_clk,
+ &ac97_clk,
+ &tcb_clk,
+ &pwmc_clk,
+ &macb_clk,
+ &aestdes_clk,
+ &adc_clk,
+ &isi_clk,
+ &lcdc_clk,
+ &dma_clk,
+ &udphs_clk,
+ &ohci_clk,
+ // irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91cap9_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91cap9_gpio[] = {
+ {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOA,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOB,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOC,
+ .clock = &pioABCD_clk,
+ }, {
+ .id = AT91CAP9_ID_PIOABCD,
+ .offset = AT91_PIOD,
+ .clock = &pioABCD_clk,
+ }
+};
+
+static void at91cap9_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+/* --------------------------------------------------------------------
+ * AT91CAP9 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91cap9_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+
+ at91_arch_reset = at91cap9_reset;
+ at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91cap9_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91cap9_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 1, /* Parallel IO Controller A, B, C and D */
+ 0, /* MP Block Peripheral 0 */
+ 0, /* MP Block Peripheral 1 */
+ 0, /* MP Block Peripheral 2 */
+ 0, /* MP Block Peripheral 3 */
+ 0, /* MP Block Peripheral 4 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+ 3, /* CAN */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 5, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0, /* Advanced Encryption Standard, Triple DES*/
+ 0, /* Analog-to-Digital Converter */
+ 0, /* Image Sensor Interface */
+ 3, /* LCD Controller */
+ 0, /* DMA Controller */
+ 2, /* USB Device Port */
+ 2, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91cap9_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
new file mode 100644
index 00000000000..c50fad9cd14
--- /dev/null
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -0,0 +1,1066 @@
+/*
+ * arch/arm/mach-at91/at91cap9_devices.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91cap9_matrix.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91CAP9_UHP_BASE,
+ .end = AT91CAP9_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_UHP,
+ .end = AT91CAP9_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_EMAC,
+ .end = AT91CAP9_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_EMAC,
+ .end = AT91CAP9_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &eth_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &eth_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91cap9_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI0,
+ .end = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI0,
+ .end = AT91CAP9_ID_MCI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc0_device = {
+ .name = "at91_mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+ .num_resources = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_MCI1,
+ .end = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_MCI1,
+ .end = AT91CAP9_ID_MCI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_mmc1_device = {
+ .name = "at91_mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ if (mmc_id == 0) { /* MCI0 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA2, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+
+ mmc0_data = *data;
+ at91_clock_associate("mci0_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc0_device);
+ } else { /* MCI1 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA16, 0);
+
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+ }
+
+ mmc1_data = *data;
+ at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91cap9_mmc1_device);
+ }
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91cap9_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1)
+ | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6)
+ | AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91cap9_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+
+static struct i2c_gpio_platform_data pdata = {
+ .sda_pin = AT91_PIN_PB4,
+ .sda_is_open_drain = 1,
+ .scl_pin = AT91_PIN_PB5,
+ .scl_is_open_drain = 1,
+ .udelay = 2, /* ~100 kHz */
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .dev.platform_data = &pdata,
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_TWI,
+ .end = AT91CAP9_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_TWI,
+ .end = AT91CAP9_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
+{
+ /* pins used for TWI interface */
+ at91_set_B_periph(AT91_PIN_PB4, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_B_periph(AT91_PIN_PB5, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ i2c_register_board_info(0, devices, nr_devices);
+ platform_device_register(&at91cap9_twi_device);
+}
+#else
+void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI0,
+ .end = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI0,
+ .end = AT91CAP9_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SPI1,
+ .end = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SPI1,
+ .end = AT91CAP9_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91cap9_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct platform_device at91cap9_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91cap9_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91cap9_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91cap9_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct atmel_ac97_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_AC97C,
+ .end = AT91CAP9_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_AC97C,
+ .end = AT91CAP9_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ac97_device = {
+ .name = "ac97c",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PA6, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PA7, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PA8, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91cap9_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .start = AT91CAP9_LCDC_BASE,
+ .end = AT91CAP9_LCDC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_LCDC,
+ .end = AT91CAP9_ID_LCDC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_lcdc_device = {
+ .name = "atmel_lcdfb",
+ .id = 0,
+ .dev = {
+ .dma_mask = &lcdc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &lcdc_data,
+ },
+ .resource = lcdc_resources,
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+
+ lcdc_data = *data;
+ platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC0,
+ .end = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC0,
+ .end = AT91CAP9_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_SSC1,
+ .end = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_SSC1,
+ .end = AT91CAP9_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91cap9_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91CAP9_ID_SSC0:
+ pdev = &at91cap9_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+ break;
+ case AT91CAP9_ID_SSC1:
+ pdev = &at91cap9_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US0,
+ .end = AT91CAP9_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US0,
+ .end = AT91CAP9_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA24, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA25, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US1,
+ .end = AT91CAP9_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US1,
+ .end = AT91CAP9_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91CAP9_BASE_US2,
+ .end = AT91CAP9_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91CAP9_ID_US2,
+ .end = AT91CAP9_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91cap9_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+}
+
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91cap9_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US0:
+ pdev = &at91cap9_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US1:
+ pdev = &at91cap9_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91CAP9_ID_US2:
+ pdev = &at91cap9_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 2cad2bf864b..d688c1dbd92 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -301,28 +301,28 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 0, /* Parallel IO Controller D */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 6, /* USART 3 */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller D */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
+ 5, /* USART 3 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 4, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 9296833f91c..ef6aeb86e98 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -50,7 +51,7 @@ static struct platform_device at91rm9200_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -146,7 +147,7 @@ static struct platform_device at91rm9200_eth_device = {
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
@@ -285,7 +286,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -306,7 +307,7 @@ static struct platform_device at91rm9200_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -375,7 +376,7 @@ static struct at91_nand_data nand_data;
static struct resource nand_resources[] = {
{
.start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
+ .end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -513,7 +514,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
[0] = {
@@ -533,7 +534,7 @@ static struct platform_device at91rm9200_spi_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi_resources,
.num_resources = ARRAY_SIZE(spi_resources),
@@ -557,8 +558,11 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
else
cs_pin = spi_standard_cs[devices[i].chip_select];
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
+ if (devices[i].chip_select == 0) /* for CS0 errata */
+ at91_set_A_periph(cs_pin, 0);
+ else
+ at91_set_gpio_output(cs_pin, 1);
+
/* pass chip-select pin to driver */
devices[i].controller_data = (void *) cs_pin;
@@ -613,24 +617,175 @@ static void __init at91_add_device_watchdog(void) {}
/* --------------------------------------------------------------------
- * LEDs
+ * SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC0,
+ .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC0,
+ .end = AT91RM9200_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC1,
+ .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC1,
+ .end = AT91RM9200_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc2_resources[] = {
+ [0] = {
+ .start = AT91RM9200_BASE_SSC2,
+ .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91RM9200_ID_SSC2,
+ .end = AT91RM9200_ID_SSC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91rm9200_ssc2_device = {
+ .name = "ssc",
+ .id = 2,
+ .dev = {
+ .dma_mask = &ssc2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc2_resources,
+ .num_resources = ARRAY_SIZE(ssc2_resources),
+};
+
+static inline void configure_ssc2_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB12, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB13, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB14, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB15, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+}
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ struct platform_device *pdev;
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91RM9200_ID_SSC0:
+ pdev = &at91rm9200_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
+ break;
+ case AT91RM9200_ID_SSC1:
+ pdev = &at91rm9200_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
+ break;
+ case AT91RM9200_ID_SSC2:
+ pdev = &at91rm9200_ssc2_device;
+ configure_ssc2_pins(pins);
+ at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
}
+
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -658,12 +813,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -693,28 +851,35 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
- /*
- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. Default is off (RTS is active low).
- */
- at91_set_gpio_output(AT91_PIN_PA21, 1);
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS) {
+ /*
+ * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
+ * We need to drive the pin manually. Default is off (RTS is active low).
+ */
+ at91_set_gpio_output(AT91_PIN_PA21, 1);
+ }
}
static struct resource uart1_resources[] = {
@@ -735,27 +900,37 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
+
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
}
static struct resource uart2_resources[] = {
@@ -776,21 +951,29 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
+
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
}
static struct resource uart3_resources[] = {
@@ -811,27 +994,35 @@ static struct atmel_uart_data uart3_data = {
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91rm9200_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -839,22 +1030,22 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91rm9200_uart0_device;
at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91rm9200_uart1_device;
at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91rm9200_uart2_device;
at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91rm9200_uart3_device;
at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
break;
@@ -876,6 +1067,53 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91rm9200_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US0:
+ pdev = &at91rm9200_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US1:
+ pdev = &at91rm9200_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US2:
+ pdev = &at91rm9200_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91RM9200_ID_US3:
+ pdev = &at91rm9200_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -886,7 +1124,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index e47381e8aab..18d06612ce8 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -327,30 +327,30 @@ void __init at91sam9260_initialize(unsigned long main_clock)
static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
0, /* Analog-to-Digital Converter */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
5, /* Serial Synchronous Controller */
0,
0,
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* Ethernet */
0, /* Image Sensor Interface */
- 6, /* USART 3 */
- 6, /* USART 4 */
- 6, /* USART 5 */
+ 5, /* USART 3 */
+ 5, /* USART 4 */
+ 5, /* USART 5 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 3091bf47d8c..105f8403860 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -12,6 +12,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -50,7 +51,7 @@ static struct platform_device at91_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -125,7 +126,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -146,7 +147,7 @@ static struct platform_device at91sam9260_eth_device = {
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
@@ -199,7 +200,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -220,7 +221,7 @@ static struct platform_device at91sam9260_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -289,7 +290,7 @@ static struct at91_nand_data nand_data;
static struct resource nand_resources[] = {
{
.start = NAND_BASE,
- .end = NAND_BASE + SZ_8M - 1,
+ .end = NAND_BASE + SZ_256M - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -312,7 +313,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -431,7 +432,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -451,7 +452,7 @@ static struct platform_device at91sam9260_spi0_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -477,7 +478,7 @@ static struct platform_device at91sam9260_spi1_device = {
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -539,24 +540,126 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
/* --------------------------------------------------------------------
- * LEDs
+ * RTT
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static struct platform_device at91sam9260_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ platform_device_register(&at91sam9260_rtt_device);
+}
+
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9260_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9260_wdt_device);
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc_resources[] = {
+ [0] = {
+ .start = AT91SAM9260_BASE_SSC,
+ .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9260_ID_SSC,
+ .end = AT91SAM9260_ID_SSC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9260_ssc_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc_resources,
+ .num_resources = ARRAY_SIZE(ssc_resources),
+};
+
+static inline void configure_ssc_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB17, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB16, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB18, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB19, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB20, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB21, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9260_ID_SSC:
+ pdev = &at91sam9260_ssc_device;
+ configure_ssc_pins(pins);
+ at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -583,12 +686,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -618,27 +724,37 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
}
static struct resource uart1_resources[] = {
@@ -659,23 +775,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -696,21 +818,29 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
@@ -731,21 +861,29 @@ static struct atmel_uart_data uart3_data = {
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
}
static struct resource uart4_resources[] = {
@@ -766,12 +904,15 @@ static struct atmel_uart_data uart4_data = {
.use_dma_rx = 1,
};
+static u64 uart4_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart4_device = {
.name = "atmel_usart",
.id = 5,
.dev = {
- .platform_data = &uart4_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart4_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart4_data,
},
.resource = uart4_resources,
.num_resources = ARRAY_SIZE(uart4_resources),
@@ -801,12 +942,15 @@ static struct atmel_uart_data uart5_data = {
.use_dma_rx = 1,
};
+static u64 uart5_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9260_uart5_device = {
.name = "atmel_usart",
.id = 6,
.dev = {
- .platform_data = &uart5_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart5_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart5_data,
},
.resource = uart5_resources,
.num_resources = ARRAY_SIZE(uart5_resources),
@@ -818,10 +962,10 @@ static inline void configure_usart5_pins(void)
at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -829,22 +973,22 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
at91_uarts[i] = &at91sam9260_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9260_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9260_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91sam9260_uart3_device;
at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
break;
@@ -876,6 +1020,63 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9260_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US0:
+ pdev = &at91sam9260_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US1:
+ pdev = &at91sam9260_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US2:
+ pdev = &at91sam9260_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US3:
+ pdev = &at91sam9260_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US4:
+ pdev = &at91sam9260_uart4_device;
+ configure_usart4_pins();
+ at91_clock_associate("usart4_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9260_ID_US5:
+ pdev = &at91sam9260_uart5_device;
+ configure_usart5_pins();
+ at91_clock_associate("usart5_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -886,7 +1087,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -898,6 +1101,8 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index dfe8c39c9fb..90b87e1877d 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -279,25 +279,25 @@ void __init at91sam9261_initialize(unsigned long main_clock)
static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C */
0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
+ 2, /* USB Device Port */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 4, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
- 3, /* USB Host port */
+ 2, /* USB Host port */
3, /* LCD Controller */
0,
0,
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 64979a9023c..245641263fc 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -13,6 +13,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -33,7 +34,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -54,7 +55,7 @@ static struct platform_device at91sam9261_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -106,8 +107,6 @@ static struct platform_device at91sam9261_udc_device = {
void __init at91_add_device_udc(struct at91_udc_data *data)
{
- unsigned long x;
-
if (!data)
return;
@@ -116,9 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data)
at91_set_deglitch(data->vbus_pin, 1);
}
- /* Pullup pin is handled internally */
- x = at91_sys_read(AT91_MATRIX_USBPUCR);
- at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON);
+ /* Pullup pin is handled internally by USB device peripheral */
udc_data = *data;
platform_device_register(&at91sam9261_udc_device);
@@ -132,7 +129,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -153,7 +150,7 @@ static struct platform_device at91sam9261_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -232,7 +229,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
return;
csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -354,7 +351,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -374,7 +371,7 @@ static struct platform_device at91sam9261_spi0_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -400,7 +397,7 @@ static struct platform_device at91sam9261_spi1_device = {
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -466,7 +463,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -494,7 +491,7 @@ static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -507,6 +504,17 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
return;
}
+#if defined(CONFIG_FB_ATMEL_STN)
+ at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
+ at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
+ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
+#else
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
@@ -529,6 +537,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
+#endif
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
@@ -539,24 +548,220 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
/* --------------------------------------------------------------------
- * LEDs
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9261_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9261_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9261_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9261_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC0,
+ .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC0,
+ .end = AT91SAM9261_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB21, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB22, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB23, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB24, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB25, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB26, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC1,
+ .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC1,
+ .end = AT91SAM9261_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PA17, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PA18, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PA19, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PA20, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA21, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA22, 1);
+}
+
+static u64 ssc2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc2_resources[] = {
+ [0] = {
+ .start = AT91SAM9261_BASE_SSC2,
+ .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9261_ID_SSC2,
+ .end = AT91SAM9261_ID_SSC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9261_ssc2_device = {
+ .name = "ssc",
+ .id = 2,
+ .dev = {
+ .dma_mask = &ssc2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc2_resources,
+ .num_resources = ARRAY_SIZE(ssc2_resources),
+};
+
+static inline void configure_ssc2_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PC25, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PC26, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PC27, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PC28, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PC29, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PC30, 1);
+}
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9261_ID_SSC0:
+ pdev = &at91sam9261_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9261_ID_SSC1:
+ pdev = &at91sam9261_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9261_ID_SSC2:
+ pdev = &at91sam9261_ssc2_device;
+ configure_ssc2_pins(pins);
+ at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ platform_device_register(pdev);
}
+
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -584,12 +789,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -619,23 +827,29 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
@@ -656,21 +870,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -691,27 +913,35 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9261_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -719,17 +949,17 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9261_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(0);
at91_uarts[i] = &at91sam9261_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9261_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
break;
@@ -751,6 +981,48 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9261_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US0:
+ pdev = &at91sam9261_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US1:
+ pdev = &at91sam9261_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9261_ID_US2:
+ pdev = &at91sam9261_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -761,7 +1033,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -774,6 +1048,8 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 00e27b17785..a53ba0f7435 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -304,34 +304,34 @@ void __init at91sam9263_initialize(unsigned long main_clock)
static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C, D and E */
+ 1, /* Parallel IO Controller A */
+ 1, /* Parallel IO Controller B */
+ 1, /* Parallel IO Controller C, D and E */
0,
0,
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
+ 5, /* USART 0 */
+ 5, /* USART 1 */
+ 5, /* USART 2 */
0, /* Multimedia Card Interface 0 */
0, /* Multimedia Card Interface 1 */
- 4, /* CAN */
- 0, /* Two-Wire Interface */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 6, /* AC97 Controller */
+ 3, /* CAN */
+ 6, /* Two-Wire Interface */
+ 5, /* Serial Peripheral Interface 0 */
+ 5, /* Serial Peripheral Interface 1 */
+ 4, /* Serial Synchronous Controller 0 */
+ 4, /* Serial Synchronous Controller 1 */
+ 5, /* AC97 Controller */
0, /* Timer Counter 0, 1 and 2 */
0, /* Pulse Width Modulation Controller */
3, /* Ethernet */
0,
0, /* 2D Graphic Engine */
- 3, /* USB Device Port */
+ 2, /* USB Device Port */
0, /* Image Sensor Interface */
3, /* LDC Controller */
0, /* DMA Controller */
0,
- 3, /* USB Host port */
+ 2, /* USB Host port */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
};
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ac329a98e95..0b12e1adcc8 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -12,6 +12,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -32,7 +33,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = 0xffffffffUL;
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
static struct at91_usbh_data usbh_data;
static struct resource usbh_resources[] = {
@@ -53,7 +54,7 @@ static struct platform_device at91_usbh_device = {
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &usbh_data,
},
.resource = usbh_resources,
@@ -136,7 +137,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = 0xffffffffUL;
+static u64 eth_dmamask = DMA_BIT_MASK(32);
static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
@@ -157,7 +158,7 @@ static struct platform_device at91sam9263_eth_device = {
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &eth_data,
},
.resource = eth_resources,
@@ -210,7 +211,7 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc0_data, mmc1_data;
static struct resource mmc0_resources[] = {
@@ -231,7 +232,7 @@ static struct platform_device at91sam9263_mmc0_device = {
.id = 0,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc0_data,
},
.resource = mmc0_resources,
@@ -256,7 +257,7 @@ static struct platform_device at91sam9263_mmc1_device = {
.id = 1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc1_data,
},
.resource = mmc1_resources,
@@ -382,7 +383,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
return;
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
- at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
@@ -500,7 +501,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi0_resources[] = {
[0] = {
@@ -520,7 +521,7 @@ static struct platform_device at91sam9263_spi0_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi0_resources,
.num_resources = ARRAY_SIZE(spi0_resources),
@@ -546,7 +547,7 @@ static struct platform_device at91sam9263_spi1_device = {
.id = 1,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi1_resources,
.num_resources = ARRAY_SIZE(spi1_resources),
@@ -612,7 +613,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
-static u64 ac97_dmamask = 0xffffffffUL;
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
static struct atmel_ac97_data ac97_data;
static struct resource ac97_resources[] = {
@@ -633,7 +634,7 @@ static struct platform_device at91sam9263_ac97_device = {
.id = 1,
.dev = {
.dma_mask = &ac97_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &ac97_data,
},
.resource = ac97_resources,
@@ -667,7 +668,7 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -688,7 +689,7 @@ static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -732,24 +733,242 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
/* --------------------------------------------------------------------
- * LEDs
+ * Image Sensor Interface
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+struct resource isi_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_ISI,
+ .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_ISI,
+ .end = AT91SAM9263_ID_ISI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_isi_device = {
+ .name = "at91_isi",
+ .id = -1,
+ .resource = isi_resources,
+ .num_resources = ARRAY_SIZE(isi_resources),
+};
+
+void __init at91_add_device_isi(void)
+{
+ at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
+ at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
+ at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
+ at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
+ at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
+ at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
+ at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
+ at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
+ at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
+ at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
+ at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
+ at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
+ at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
+ at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
+ at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
+ at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
+}
+#else
+void __init at91_add_device_isi(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt0_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT0,
+ .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_rtt0_device = {
+ .name = "at91_rtt",
+ .id = 0,
+ .resource = rtt0_resources,
+ .num_resources = ARRAY_SIZE(rtt0_resources),
+};
+
+static struct resource rtt1_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT1,
+ .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_rtt1_device = {
+ .name = "at91_rtt",
+ .id = 1,
+ .resource = rtt1_resources,
+ .num_resources = ARRAY_SIZE(rtt1_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9263_rtt0_device);
+ platform_device_register(&at91sam9263_rtt1_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9263_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9263_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SSC0,
+ .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SSC0,
+ .end = AT91SAM9263_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PB0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PB1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PB2, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PB3, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PB4, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PB5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SSC1,
+ .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SSC1,
+ .end = AT91SAM9263_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PB6, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PB7, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PB8, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PB9, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_A_periph(AT91_PIN_PB10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_A_periph(AT91_PIN_PB11, 1);
+}
+
+/*
+ * Return the device node so that board init code can use it as the
+ * parent for the device node reflecting how it's used on this board.
+ *
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9263_ID_SSC0:
+ pdev = &at91sam9263_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9263_ID_SSC1:
+ pdev = &at91sam9263_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+ platform_device_register(pdev);
}
+
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -778,12 +997,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -813,23 +1035,29 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
}
static struct resource uart1_resources[] = {
@@ -850,23 +1078,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -887,29 +1121,35 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9263_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -917,17 +1157,17 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9263_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
break;
@@ -949,6 +1189,48 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9263_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US0:
+ pdev = &at91sam9263_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US1:
+ pdev = &at91sam9263_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9263_ID_US2:
+ pdev = &at91sam9263_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -960,6 +1242,8 @@ void __init at91_add_device_serial(void)
}
#else
void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -971,6 +1255,8 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 2bd60a3dc62..f43b5c33e45 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -9,6 +9,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -29,7 +30,7 @@
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = 0xffffffffUL;
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
static struct at91_mmc_data mmc_data;
static struct resource mmc_resources[] = {
@@ -50,7 +51,7 @@ static struct platform_device at91sam9rl_mmc_device = {
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &mmc_data,
},
.resource = mmc_resources,
@@ -247,7 +248,7 @@ void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = 0xffffffffUL;
+static u64 spi_dmamask = DMA_BIT_MASK(32);
static struct resource spi_resources[] = {
[0] = {
@@ -267,7 +268,7 @@ static struct platform_device at91sam9rl_spi_device = {
.id = 0,
.dev = {
.dma_mask = &spi_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = spi_resources,
.num_resources = ARRAY_SIZE(spi_resources),
@@ -312,7 +313,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
* -------------------------------------------------------------------- */
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = 0xffffffffUL;
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
static struct atmel_lcdfb_info lcdc_data;
static struct resource lcdc_resources[] = {
@@ -340,7 +341,7 @@ static struct platform_device at91_lcdc_device = {
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &lcdc_data,
},
.resource = lcdc_resources,
@@ -384,24 +385,196 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
/* --------------------------------------------------------------------
- * LEDs
+ * RTC
* -------------------------------------------------------------------- */
-#if defined(CONFIG_LEDS)
-u8 at91_leds_cpu;
-u8 at91_leds_timer;
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9rl_rtc_device = {
+ .name = "at91_rtc",
+ .id = -1,
+ .num_resources = 0,
+};
-void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+static void __init at91_add_device_rtc(void)
{
- /* Enable GPIO to access the LEDs */
- at91_set_gpio_output(cpu_led, 1);
- at91_set_gpio_output(timer_led, 1);
+ platform_device_register(&at91sam9rl_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+ {
+ .start = AT91_BASE_SYS + AT91_RTT,
+ .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9rl_rtt_device = {
+ .name = "at91_rtt",
+ .id = -1,
+ .resource = rtt_resources,
+ .num_resources = ARRAY_SIZE(rtt_resources),
+};
- at91_leds_cpu = cpu_led;
- at91_leds_timer = timer_led;
+static void __init at91_add_device_rtt(void)
+{
+ platform_device_register(&at91sam9rl_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ * Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9rl_wdt_device = {
+ .name = "at91_wdt",
+ .id = -1,
+ .num_resources = 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+ platform_device_register(&at91sam9rl_wdt_device);
}
#else
-void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SSC0,
+ .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SSC0,
+ .end = AT91SAM9RL_ID_SSC0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ssc0_device = {
+ .name = "ssc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ssc0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc0_resources,
+ .num_resources = ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_A_periph(AT91_PIN_PC0, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_A_periph(AT91_PIN_PC1, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_A_periph(AT91_PIN_PA15, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA10, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA22, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_SSC1,
+ .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_SSC1,
+ .end = AT91SAM9RL_ID_SSC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ssc1_device = {
+ .name = "ssc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &ssc1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = ssc1_resources,
+ .num_resources = ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+ if (pins & ATMEL_SSC_TF)
+ at91_set_B_periph(AT91_PIN_PA29, 1);
+ if (pins & ATMEL_SSC_TK)
+ at91_set_B_periph(AT91_PIN_PA30, 1);
+ if (pins & ATMEL_SSC_TD)
+ at91_set_B_periph(AT91_PIN_PA13, 1);
+ if (pins & ATMEL_SSC_RD)
+ at91_set_B_periph(AT91_PIN_PA14, 1);
+ if (pins & ATMEL_SSC_RK)
+ at91_set_B_periph(AT91_PIN_PA9, 1);
+ if (pins & ATMEL_SSC_RF)
+ at91_set_B_periph(AT91_PIN_PA8, 1);
+}
+
+/*
+ * Return the device node so that board init code can use it as the
+ * parent for the device node reflecting how it's used on this board.
+ *
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver. For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ /*
+ * NOTE: caller is responsible for passing information matching
+ * "pins" to whatever will be using each particular controller.
+ */
+ switch (id) {
+ case AT91SAM9RL_ID_SSC0:
+ pdev = &at91sam9rl_ssc0_device;
+ configure_ssc0_pins(pins);
+ at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+ break;
+ case AT91SAM9RL_ID_SSC1:
+ pdev = &at91sam9rl_ssc1_device;
+ configure_ssc1_pins(pins);
+ at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+ break;
+ default:
+ return;
+ }
+
+ platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#endif
@@ -429,12 +602,15 @@ static struct atmel_uart_data dbgu_data = {
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_dbgu_device = {
.name = "atmel_usart",
.id = 0,
.dev = {
- .platform_data = &dbgu_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &dbgu_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &dbgu_data,
},
.resource = dbgu_resources,
.num_resources = ARRAY_SIZE(dbgu_resources),
@@ -464,23 +640,37 @@ static struct atmel_uart_data uart0_data = {
.use_dma_rx = 1,
};
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart0_device = {
.name = "atmel_usart",
.id = 1,
.dev = {
- .platform_data = &uart0_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart0_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart0_data,
},
.resource = uart0_resources,
.num_resources = ARRAY_SIZE(uart0_resources),
};
-static inline void configure_usart0_pins(void)
+static inline void configure_usart0_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
+ if (pins & ATMEL_UART_DSR)
+ at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
+ if (pins & ATMEL_UART_DTR)
+ at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
+ if (pins & ATMEL_UART_DCD)
+ at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
+ if (pins & ATMEL_UART_RI)
+ at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
}
static struct resource uart1_resources[] = {
@@ -501,21 +691,29 @@ static struct atmel_uart_data uart1_data = {
.use_dma_rx = 1,
};
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart1_device = {
.name = "atmel_usart",
.id = 2,
.dev = {
- .platform_data = &uart1_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart1_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart1_data,
},
.resource = uart1_resources,
.num_resources = ARRAY_SIZE(uart1_resources),
};
-static inline void configure_usart1_pins(void)
+static inline void configure_usart1_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
}
static struct resource uart2_resources[] = {
@@ -536,21 +734,29 @@ static struct atmel_uart_data uart2_data = {
.use_dma_rx = 1,
};
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart2_device = {
.name = "atmel_usart",
.id = 3,
.dev = {
- .platform_data = &uart2_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart2_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart2_data,
},
.resource = uart2_resources,
.num_resources = ARRAY_SIZE(uart2_resources),
};
-static inline void configure_usart2_pins(void)
+static inline void configure_usart2_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
}
static struct resource uart3_resources[] = {
@@ -571,27 +777,35 @@ static struct atmel_uart_data uart3_data = {
.use_dma_rx = 1,
};
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device at91sam9rl_uart3_device = {
.name = "atmel_usart",
.id = 4,
.dev = {
- .platform_data = &uart3_data,
- .coherent_dma_mask = 0xffffffff,
+ .dma_mask = &uart3_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &uart3_data,
},
.resource = uart3_resources,
.num_resources = ARRAY_SIZE(uart3_resources),
};
-static inline void configure_usart3_pins(void)
+static inline void configure_usart3_pins(unsigned pins)
{
at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
+
+ if (pins & ATMEL_UART_RTS)
+ at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
+ if (pins & ATMEL_UART_CTS)
+ at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
}
-struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init at91_init_serial(struct at91_uart_config *config)
+void __init __deprecated at91_init_serial(struct at91_uart_config *config)
{
int i;
@@ -599,22 +813,22 @@ void __init at91_init_serial(struct at91_uart_config *config)
for (i = 0; i < config->nr_tty; i++) {
switch (config->tty_map[i]) {
case 0:
- configure_usart0_pins();
+ configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
at91_uarts[i] = &at91sam9rl_uart0_device;
at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
break;
case 1:
- configure_usart1_pins();
+ configure_usart1_pins(0);
at91_uarts[i] = &at91sam9rl_uart1_device;
at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
break;
case 2:
- configure_usart2_pins();
+ configure_usart2_pins(0);
at91_uarts[i] = &at91sam9rl_uart2_device;
at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
break;
case 3:
- configure_usart3_pins();
+ configure_usart3_pins(0);
at91_uarts[i] = &at91sam9rl_uart3_device;
at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
break;
@@ -636,6 +850,53 @@ void __init at91_init_serial(struct at91_uart_config *config)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0: /* DBGU */
+ pdev = &at91sam9rl_dbgu_device;
+ configure_dbgu_pins();
+ at91_clock_associate("mck", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US0:
+ pdev = &at91sam9rl_uart0_device;
+ configure_usart0_pins(pins);
+ at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US1:
+ pdev = &at91sam9rl_uart1_device;
+ configure_usart1_pins(pins);
+ at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US2:
+ pdev = &at91sam9rl_uart2_device;
+ configure_usart2_pins(pins);
+ at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+ break;
+ case AT91SAM9RL_ID_US3:
+ pdev = &at91sam9rl_uart3_device;
+ configure_usart3_pins(pins);
+ at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+ break;
+ default:
+ return;
+ }
+ pdev->id = portnr; /* update to mapped ID */
+
+ if (portnr < ATMEL_MAX_UART)
+ at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+ if (portnr < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[portnr];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
void __init at91_add_device_serial(void)
{
int i;
@@ -646,7 +907,9 @@ void __init at91_add_device_serial(void)
}
}
#else
-void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}
#endif
@@ -659,6 +922,9 @@ void __init at91_add_device_serial(void) {}
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_rtc();
+ at91_add_device_rtt();
+ at91_add_device_watchdog();
return 0;
}
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
new file mode 100644
index 00000000000..18543713154
--- /dev/null
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -0,0 +1,359 @@
+/*
+ * linux/arch/arm/mach-at91/board-cap9adk.c
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91cap9_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+static void __init cap9adk_map_io(void)
+{
+ /* Initialize processor: 12 MHz crystal */
+ at91cap9_initialize(12000000);
+
+ /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
+ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
+ /* ... POWER LED always on */
+ at91_set_gpio_output(AT91_PIN_PC29, 1);
+
+ /* Setup the serial ports and console */
+ at91_register_uart(0, 0, 0); /* DBGU = ttyS0 */
+ at91_set_serial_console(0);
+}
+
+static void __init cap9adk_init_irq(void)
+{
+ at91cap9_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cap9adk_usbh_data = {
+ .ports = 2,
+};
+
+
+/*
+ * ADS7846 Touchscreen
+ */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+ return !at91_get_gpio_value(AT91_PIN_PC4); /* Touchscreen PENIRQ */
+}
+
+static struct ads7846_platform_data ads_info = {
+ .model = 7843,
+ .x_min = 150,
+ .x_max = 3830,
+ .y_min = 190,
+ .y_max = 3830,
+ .vref_delay_usecs = 100,
+ .x_plate_ohms = 450,
+ .y_plate_ohms = 250,
+ .pressure_max = 15000,
+ .debounce_max = 1,
+ .debounce_rep = 0,
+ .debounce_tol = (~0),
+ .get_pendown_state = ads7843_pendown_state,
+};
+
+static void __init cap9adk_add_device_ts(void)
+{
+ at91_set_gpio_input(AT91_PIN_PC4, 1); /* Touchscreen PENIRQ */
+ at91_set_gpio_input(AT91_PIN_PC5, 1); /* Touchscreen BUSY */
+}
+#else
+static void __init cap9adk_add_device_ts(void) {}
+#endif
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info cap9adk_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ .bus_num = 0,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ {
+ .modalias = "ads7846",
+ .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */
+ .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
+ .bus_num = 0,
+ .platform_data = &ads_info,
+ .irq = AT91_PIN_PC4,
+ },
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cap9adk_mmc_data = {
+ .wire4 = 1,
+// .det_pin = ... not connected
+// .wp_pin = ... not connected
+// .vcc_pin = ... not connected
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cap9adk_macb_data = {
+ .is_rmii = 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
+ {
+ .name = "NAND partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(cap9adk_nand_partitions);
+ return cap9adk_nand_partitions;
+}
+
+static struct at91_nand_data __initdata cap9adk_nand_data = {
+ .ale = 21,
+ .cle = 22,
+// .det_pin = ... not connected
+// .rdy_pin = ... not connected
+ .enable_pin = AT91_PIN_PD15,
+ .partition_info = nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+ .bus_width_16 = 1,
+#else
+ .bus_width_16 = 0,
+#endif
+};
+
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition cap9adk_nor_partitions[] = {
+ {
+ .name = "NOR partition",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data cap9adk_nor_data = {
+ .width = 2,
+ .parts = cap9adk_nor_partitions,
+ .nr_parts = ARRAY_SIZE(cap9adk_nor_partitions),
+};
+
+#define NOR_BASE AT91_CHIPSELECT_0
+#define NOR_SIZE 0x800000
+
+static struct resource nor_flash_resources[] = {
+ {
+ .start = NOR_BASE,
+ .end = NOR_BASE + NOR_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device cap9adk_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cap9adk_nor_data,
+ },
+ .resource = nor_flash_resources,
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+};
+
+static __init void cap9adk_add_device_nor(void)
+{
+ unsigned long csa;
+
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(0), AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2)
+ | AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
+
+ at91_sys_write(AT91_SMC_PULSE(0), AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10)
+ | AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
+
+ at91_sys_write(AT91_SMC_CYCLE(0), AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+
+ at91_sys_write(AT91_SMC_MODE(0), AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+ | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+ | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
+
+ platform_device_register(&cap9adk_nor_flash);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+ {
+ .name = "TX09D50VM1CCA @ 60",
+ .refresh = 60,
+ .xres = 240, .yres = 320,
+ .pixclock = KHZ2PICOS(4965),
+
+ .left_margin = 1, .right_margin = 33,
+ .upper_margin = 1, .lower_margin = 0,
+ .hsync_len = 5, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "TX09D70VM1CCA",
+
+ .modedb = at91_tft_vga_modes,
+ .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91CAP9_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_TFT \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+ if (on)
+ at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
+ else
+ at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
+ .default_bpp = 16,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91CAP9_DEFAULT_LCDCON2,
+ .default_monspecs = &at91fb_default_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .guard_time = 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
+#endif
+
+
+/*
+ * AC97
+ */
+static struct atmel_ac97_data cap9adk_ac97_data = {
+// .reset_pin = ... not connected
+};
+
+
+static void __init cap9adk_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* USB Host */
+ set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+ at91_add_device_usbh(&cap9adk_usbh_data);
+ /* SPI */
+ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
+ /* Touchscreen */
+ cap9adk_add_device_ts();
+ /* MMC */
+ at91_add_device_mmc(1, &cap9adk_mmc_data);
+ /* Ethernet */
+ at91_add_device_eth(&cap9adk_macb_data);
+ /* NAND */
+ at91_add_device_nand(&cap9adk_nand_data);
+ /* NOR Flash */
+ cap9adk_add_device_nor();
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* LCD Controller */
+ set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+ at91_add_device_lcdc(&cap9adk_lcdc_data);
+ /* AC97 */
+ at91_add_device_ac97(&cap9adk_ac97_data);
+}
+
+MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
+ /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91sam926x_timer,
+ .map_io = cap9adk_map_io,
+ .init_irq = cap9adk_init_irq,
+ .init_machine = cap9adk_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index d0aa20c9383..0e2a11fc5bb 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -25,6 +25,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -156,6 +158,85 @@ static struct platform_device csb_flash = {
.num_resources = ARRAY_SIZE(csb_flash_resources),
};
+/*
+ * GPIO Buttons (on CSB300)
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button csb300_buttons[] = {
+ {
+ .gpio = AT91_PIN_PB29,
+ .code = BTN_0,
+ .desc = "sw0",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PB28,
+ .code = BTN_1,
+ .desc = "sw1",
+ .active_low = 1,
+ .wakeup = 1,
+ },
+ {
+ .gpio = AT91_PIN_PA21,
+ .code = BTN_2,
+ .desc = "sw2",
+ .active_low = 1,
+ .wakeup = 1,
+ }
+};
+
+static struct gpio_keys_platform_data csb300_button_data = {
+ .buttons = csb300_buttons,
+ .nbuttons = ARRAY_SIZE(csb300_buttons),
+};
+
+static struct platform_device csb300_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &csb300_button_data,
+ }
+};
+
+static void __init csb300_add_device_buttons(void)
+{
+ at91_set_gpio_input(AT91_PIN_PB29, 0); /* sw0 */
+ at91_set_deglitch(AT91_PIN_PB29, 1);
+ at91_set_gpio_input(AT91_PIN_PB28, 0); /* sw1 */
+ at91_set_deglitch(AT91_PIN_PB28, 1);
+ at91_set_gpio_input(AT91_PIN_PA21, 0); /* sw2 */
+ at91_set_deglitch(AT91_PIN_PA21, 1);
+
+ platform_device_register(&csb300_button_device);
+}
+#else
+static void __init csb300_add_device_buttons(void) {}
+#endif
+
+static struct gpio_led csb_leds[] = {
+ { /* "led0", yellow */
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "led1", green */
+ .name = "led1",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "led2", yellow */
+ .name = "led2",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "ide-disk",
+ },
+};
+
+
static void __init csb337_board_init(void)
{
/* Serial */
@@ -177,6 +258,10 @@ static void __init csb337_board_init(void)
at91_add_device_mmc(0, &csb337_mmc_data);
/* NOR flash */
platform_device_register(&csb_flash);
+ /* LEDs */
+ at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
+ /* Switches on CSB300 */
+ csb300_add_device_buttons();
}
MACHINE_START(CSB337, "Cogent CSB337")
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index 40c9e433170..0a897efeba8 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -183,6 +183,14 @@ static struct platform_device dk_flash = {
.num_resources = 1,
};
+static struct gpio_led dk_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
static void __init dk_board_init(void)
{
@@ -213,6 +221,8 @@ static void __init dk_board_init(void)
at91_add_device_nand(&dk_nand_data);
/* NOR Flash */
platform_device_register(&dk_flash);
+ /* LEDs */
+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
/* VGA */
// dk_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 53a5ef9e72e..0574e50a30d 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -141,6 +141,25 @@ static struct platform_device ek_flash = {
.num_resources = 1,
};
+static struct gpio_led ek_leds[] = {
+ { /* "user led 1", DS2 */
+ .name = "green",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "user led 2", DS4 */
+ .name = "yellow",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 3", DS6 */
+ .name = "red",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ }
+};
static void __init ek_board_init(void)
{
@@ -167,6 +186,8 @@ static void __init ek_board_init(void)
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* VGA */
// ek_add_device_video();
}
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 550ae59a3ac..aa29ea58ca0 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -280,6 +280,68 @@ static struct spi_board_info ek_spi_devices[] = {
* LCD Controller
*/
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+
+#if defined(CONFIG_FB_ATMEL_STN)
+
+/* STN */
+static struct fb_videomode at91_stn_modes[] = {
+ {
+ .name = "SP06Q002 @ 75",
+ .refresh = 75,
+ .xres = 320, .yres = 240,
+ .pixclock = KHZ2PICOS(1440),
+
+ .left_margin = 1, .right_margin = 1,
+ .upper_margin = 0, .lower_margin = 0,
+ .hsync_len = 1, .vsync_len = 1,
+
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+};
+
+static struct fb_monspecs at91fb_default_stn_monspecs = {
+ .manufacturer = "HIT",
+ .monitor = "SP06Q002",
+
+ .modedb = at91_stn_modes,
+ .modedb_len = ARRAY_SIZE(at91_stn_modes),
+ .hfmin = 15000,
+ .hfmax = 64000,
+ .vfmin = 50,
+ .vfmax = 150,
+};
+
+#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+ | ATMEL_LCDC_DISTYPE_STNMONO \
+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
+ | ATMEL_LCDC_IFWIDTH_4 \
+ | ATMEL_LCDC_SCANMOD_SINGLE)
+
+static void at91_lcdc_stn_power_control(int on)
+{
+ /* backlight */
+ if (on) { /* power up */
+ at91_set_gpio_value(AT91_PIN_PC14, 0);
+ at91_set_gpio_value(AT91_PIN_PC15, 0);
+ } else { /* power down */
+ at91_set_gpio_value(AT91_PIN_PC14, 1);
+ at91_set_gpio_value(AT91_PIN_PC15, 1);
+ }
+}
+
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+ .default_bpp = 1,
+ .default_dmacon = ATMEL_LCDC_DMAEN,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
+ .default_monspecs = &at91fb_default_stn_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
+ .guard_time = 1,
+};
+
+#else
+
+/* TFT */
static struct fb_videomode at91_tft_vga_modes[] = {
{
.name = "TX09D50VM1CCA @ 60",
@@ -296,7 +358,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
},
};
-static struct fb_monspecs at91fb_default_monspecs = {
+static struct fb_monspecs at91fb_default_tft_monspecs = {
.manufacturer = "HIT",
.monitor = "TX09D50VM1CCA",
@@ -308,11 +370,11 @@ static struct fb_monspecs at91fb_default_monspecs = {
.vfmax = 150,
};
-#define AT91SAM9261_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
+#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
| ATMEL_LCDC_DISTYPE_TFT \
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_tft_power_control(int on)
{
if (on)
at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
@@ -320,15 +382,15 @@ static void at91_lcdc_power_control(int on)
at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
}
-/* Driver datas */
static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
.default_bpp = 16,
.default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9261_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
+ .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
+ .default_monspecs = &at91fb_default_tft_monspecs,
+ .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
.guard_time = 1,
};
+#endif
#else
static struct atmel_lcdfb_info __initdata ek_lcdc_data;
@@ -342,25 +404,25 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
static struct gpio_keys_button ek_buttons[] = {
{
.gpio = AT91_PIN_PA27,
- .keycode = BTN_0,
+ .code = BTN_0,
.desc = "Button 0",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA26,
- .keycode = BTN_1,
+ .code = BTN_1,
.desc = "Button 1",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA25,
- .keycode = BTN_2,
+ .code = BTN_2,
.desc = "Button 2",
.active_low = 1,
},
{
.gpio = AT91_PIN_PA24,
- .keycode = BTN_3,
+ .code = BTN_3,
.desc = "Button 3",
.active_low = 1,
}
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ab9dcc07545..f09347a86e7 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -27,6 +27,8 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
#include <video/atmel_lcdc.h>
@@ -163,6 +165,7 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
+ .phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
@@ -264,6 +267,55 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+ { /* BP1, "leftclic" */
+ .code = BTN_LEFT,
+ .gpio = AT91_PIN_PC5,
+ .active_low = 1,
+ .desc = "left_click",
+ .wakeup = 1,
+ },
+ { /* BP2, "rightclic" */
+ .code = BTN_RIGHT,
+ .gpio = AT91_PIN_PC4,
+ .active_low = 1,
+ .desc = "right_click",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+ .buttons = ek_buttons,
+ .nbuttons = ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &ek_button_data,
+ }
+};
+
+static void __init ek_add_device_buttons(void)
+{
+ at91_set_GPIO_periph(AT91_PIN_PC5, 0); /* left button */
+ at91_set_deglitch(AT91_PIN_PC5, 1);
+ at91_set_GPIO_periph(AT91_PIN_PC4, 0); /* right button */
+ at91_set_deglitch(AT91_PIN_PC4, 1);
+
+ platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
* AC97
*/
static struct atmel_ac97_data ek_ac97_data = {
@@ -271,6 +323,30 @@ static struct atmel_ac97_data ek_ac97_data = {
};
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+ { /* "left" led, green, userled1, pwm1 */
+ .name = "ds1",
+ .gpio = AT91_PIN_PB8,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "right" led, green, userled2, pwm2 */
+ .name = "ds2",
+ .gpio = AT91_PIN_PC29,
+ .active_low = 1,
+ .default_trigger = "nand-disk",
+ },
+ { /* "power" led, yellow, pwm0 */
+ .name = "ds3",
+ .gpio = AT91_PIN_PB7,
+ .default_trigger = "heartbeat",
+ },
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
@@ -294,8 +370,12 @@ static void __init ek_board_init(void)
at91_add_device_i2c(NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
+ /* Push Buttons */
+ ek_add_device_buttons();
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 57c3b647ce8..ec76eeaafd4 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -574,6 +574,8 @@ int __init at91_clock_init(unsigned long main_clock)
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 77d4c0a3784..b5daf7f5e01 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -15,6 +15,7 @@ extern void __init at91sam9261_initialize(unsigned long main_clock);
extern void __init at91sam9263_initialize(unsigned long main_clock);
extern void __init at91sam9rl_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91cap9_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -23,6 +24,7 @@ extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
+extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index aa2d365c93f..6aeddd68d8a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -13,6 +13,8 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -414,6 +416,66 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
/*--------------------------------------------------------------------------*/
+#ifdef CONFIG_DEBUG_FS
+
+static int at91_gpio_show(struct seq_file *s, void *unused)
+{
+ int bank, j;
+
+ /* print heading */
+ seq_printf(s, "Pin\t");
+ for (bank = 0; bank < gpio_banks; bank++) {
+ seq_printf(s, "PIO%c\t", 'A' + bank);
+ };
+ seq_printf(s, "\n\n");
+
+ /* print pin status */
+ for (j = 0; j < 32; j++) {
+ seq_printf(s, "%i:\t", j);
+
+ for (bank = 0; bank < gpio_banks; bank++) {
+ unsigned pin = PIN_BASE + (32 * bank) + j;
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (__raw_readl(pio + PIO_PSR) & mask)
+ seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
+ else
+ seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
+
+ seq_printf(s, "\t");
+ }
+
+ seq_printf(s, "\n");
+ }
+
+ return 0;
+}
+
+static int at91_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, at91_gpio_show, NULL);
+}
+
+static const struct file_operations at91_gpio_operations = {
+ .open = at91_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init at91_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/at91_gpio */
+ (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
+ return 0;
+}
+postcore_initcall(at91_gpio_debugfs_init);
+
+#endif
+
+/*--------------------------------------------------------------------------*/
+
/*
* Called from the processor-specific init to enable GPIO interrupt support.
*/
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0d514497398..9cdcda500fe 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -14,11 +14,62 @@
#include <linux/init.h>
#include <asm/mach-types.h>
-#include <asm/leds.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_NEW_LEDS)
+
+#include <linux/platform_device.h>
+
+/*
+ * New cross-platform LED support.
+ */
+
+static struct gpio_led_platform_data led_data;
+
+static struct platform_device at91_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &led_data,
+};
+
+void __init at91_gpio_leds(struct gpio_led *leds, int nr)
+{
+ int i;
+
+ if (!nr)
+ return;
+
+ for (i = 0; i < nr; i++)
+ at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
+
+ led_data.leds = leds;
+ led_data.num_leds = nr;
+ platform_device_register(&at91_leds);
+}
+
+#else
+void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
+#endif
+
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+
+#include <asm/leds.h>
+
+/*
+ * Old ARM-specific LED framework; not fully functional when generic time is
+ * in use.
+ */
+
+static u8 at91_leds_cpu;
+static u8 at91_leds_timer;
+
static inline void at91_led_on(unsigned int led)
{
at91_set_gpio_value(led, 0);
@@ -93,3 +144,18 @@ static int __init leds_init(void)
}
__initcall(leds_init);
+
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 98cb6148291..4b120cc3613 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -80,6 +80,11 @@ static int at91_pm_verify_clocks(void)
pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
return 0;
}
+ } else if (cpu_is_at91cap9()) {
+ if ((scsr & AT91CAP9_PMC_UHP) != 0) {
+ pr_debug("AT91: PM - Suspend-to-RAM with USB still active\n");
+ return 0;
+ }
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index f1074ff02fd..91f6a07a51d 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -3,6 +3,7 @@
* Core routines for Cirrus EP93xx chips.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
*
* Thanks go to Michael Burian and Ray Lehtiniemi for their key
* role in the ep93xx linux community.
@@ -21,7 +22,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -153,38 +153,41 @@ static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
-static void update_gpio_int_params(int abf)
+/* Port ordering is: A B F */
+static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
+static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
+static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
+static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x5c };
+
+static void update_gpio_int_params(unsigned port)
{
- if (abf == 0) {
- __raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
- __raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
- __raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
- } else if (abf == 1) {
- __raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
- __raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
- __raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
- } else if (abf == 2) {
- __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
- __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
- __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
- __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
- } else {
- BUG();
- }
-}
+ BUG_ON(port > 2);
+
+ __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
+ __raw_writeb(gpio_int_type2[port],
+ EP93XX_GPIO_REG(int_type2_register_offset[port]));
-static unsigned char data_register_offset[8] = {
- 0x00, 0x04, 0x08, 0x0c, 0x20, 0x30, 0x38, 0x40,
+ __raw_writeb(gpio_int_type1[port],
+ EP93XX_GPIO_REG(int_type1_register_offset[port]));
+
+ __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
+ EP93XX_GPIO_REG(int_en_register_offset[port]));
+}
+
+/* Port ordering is: A B F D E C G H */
+static const u8 data_register_offset[8] = {
+ 0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40,
};
-static unsigned char data_direction_register_offset[8] = {
- 0x10, 0x14, 0x18, 0x1c, 0x24, 0x34, 0x3c, 0x44,
+static const u8 data_direction_register_offset[8] = {
+ 0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44,
};
-void gpio_line_config(int line, int direction)
+#define GPIO_IN 0
+#define GPIO_OUT 1
+
+static void ep93xx_gpio_set_direction(unsigned line, int direction)
{
unsigned int data_direction_register;
unsigned long flags;
@@ -195,14 +198,10 @@ void gpio_line_config(int line, int direction)
local_irq_save(flags);
if (direction == GPIO_OUT) {
- if (line >= 0 && line < 16) {
- /* Port A/B. */
+ if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) {
+ /* Port A/B/F */
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
update_gpio_int_params(line >> 3);
- } else if (line >= 40 && line < 48) {
- /* Port F. */
- gpio_int_unmasked[2] &= ~(1 << (line & 7));
- update_gpio_int_params(2);
}
v = __raw_readb(data_direction_register);
@@ -215,39 +214,58 @@ void gpio_line_config(int line, int direction)
}
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_config);
-int gpio_line_get(int line)
+int gpio_direction_input(unsigned gpio)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+
+ ep93xx_gpio_set_direction(gpio, GPIO_IN);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ ep93xx_gpio_set_direction(gpio, GPIO_OUT);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+int gpio_get_value(unsigned gpio)
{
unsigned int data_register;
- data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+ data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
- return !!(__raw_readb(data_register) & (1 << (line & 7)));
+ return !!(__raw_readb(data_register) & (1 << (gpio & 7)));
}
-EXPORT_SYMBOL(gpio_line_get);
+EXPORT_SYMBOL(gpio_get_value);
-void gpio_line_set(int line, int value)
+void gpio_set_value(unsigned gpio, int value)
{
unsigned int data_register;
unsigned long flags;
unsigned char v;
- data_register = EP93XX_GPIO_REG(data_register_offset[line >> 3]);
+ data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
local_irq_save(flags);
- if (value == EP93XX_GPIO_HIGH) {
- v = __raw_readb(data_register);
- v |= 1 << (line & 7);
- __raw_writeb(v, data_register);
- } else if (value == EP93XX_GPIO_LOW) {
- v = __raw_readb(data_register);
- v &= ~(1 << (line & 7));
- __raw_writeb(v, data_register);
- }
+ v = __raw_readb(data_register);
+ if (value)
+ v |= 1 << (gpio & 7);
+ else
+ v &= ~(1 << (gpio & 7));
+ __raw_writeb(v, data_register);
local_irq_restore(flags);
}
-EXPORT_SYMBOL(gpio_line_set);
+EXPORT_SYMBOL(gpio_set_value);
/*************************************************************************
@@ -261,47 +279,67 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
- desc = irq_desc + IRQ_EP93XX_GPIO(0) + i;
- desc_handle_irq(IRQ_EP93XX_GPIO(0) + i, desc);
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
+ desc = irq_desc + gpio_irq;
+ desc_handle_irq(gpio_irq, desc);
}
}
status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
- desc = irq_desc + IRQ_EP93XX_GPIO(8) + i;
- desc_handle_irq(IRQ_EP93XX_GPIO(8) + i, desc);
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
+ desc = irq_desc + gpio_irq;
+ desc_handle_irq(gpio_irq, desc);
}
}
}
static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
{
- int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+ /*
+ * map discontiguous hw irq range to continous sw irq range:
+ *
+ * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
+ */
+ int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
+ int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
}
+static void ep93xx_gpio_irq_ack(unsigned int irq)
+{
+ int line = irq_to_gpio(irq);
+ int port = line >> 3;
+ int port_mask = 1 << (line & 7);
+
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+ update_gpio_int_params(port);
+ }
+
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
+}
+
static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
+ int port_mask = 1 << (line & 7);
- gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
+
+ gpio_int_unmasked[port] &= ~port_mask;
update_gpio_int_params(port);
- if (port == 0) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
- } else if (port == 1) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
- } else if (port == 2) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
- }
+ __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
}
static void ep93xx_gpio_irq_mask(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] &= ~(1 << (line & 7));
@@ -310,7 +348,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq)
static void ep93xx_gpio_irq_unmask(unsigned int irq)
{
- int line = irq - IRQ_EP93XX_GPIO(0);
+ int line = irq_to_gpio(irq);
int port = line >> 3;
gpio_int_unmasked[port] |= 1 << (line & 7);
@@ -325,38 +363,54 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq)
*/
static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
{
- int port;
- int line;
-
- line = irq - IRQ_EP93XX_GPIO(0);
- if (line >= 0 && line < 16) {
- gpio_line_config(line, GPIO_IN);
- } else {
- gpio_line_config(EP93XX_GPIO_LINE_F(line-16), GPIO_IN);
+ struct irq_desc *desc = irq_desc + irq;
+ const int gpio = irq_to_gpio(irq);
+ const int port = gpio >> 3;
+ const int port_mask = 1 << (gpio & 7);
+
+ ep93xx_gpio_set_direction(gpio, GPIO_IN);
+
+ switch (type) {
+ case IRQT_RISING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQT_FALLING:
+ gpio_int_type1[port] |= port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_edge_irq;
+ break;
+ case IRQT_HIGH:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] |= port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQT_LOW:
+ gpio_int_type1[port] &= ~port_mask;
+ gpio_int_type2[port] &= ~port_mask;
+ desc->handle_irq = handle_level_irq;
+ break;
+ case IRQT_BOTHEDGE:
+ gpio_int_type1[port] |= port_mask;
+ /* set initial polarity based on current input level */
+ if (gpio_get_value(gpio))
+ gpio_int_type2[port] &= ~port_mask; /* falling */
+ else
+ gpio_int_type2[port] |= port_mask; /* rising */
+ desc->handle_irq = handle_edge_irq;
+ break;
+ default:
+ pr_err("ep93xx: failed to set irq type %d for gpio %d\n",
+ type, gpio);
+ return -EINVAL;
}
- port = line >> 3;
- line &= 7;
-
- if (type & IRQT_RISING) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] |= 1 << line;
- gpio_int_type2[port] |= 1 << line;
- } else if (type & IRQT_FALLING) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] |= 1 << line;
- gpio_int_type2[port] &= ~(1 << line);
- } else if (type & IRQT_HIGH) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] &= ~(1 << line);
- gpio_int_type2[port] |= 1 << line;
- } else if (type & IRQT_LOW) {
- gpio_int_enabled[port] |= 1 << line;
- gpio_int_type1[port] &= ~(1 << line);
- gpio_int_type2[port] &= ~(1 << line);
- } else {
- gpio_int_enabled[port] &= ~(1 << line);
- }
+ gpio_int_enabled[port] |= port_mask;
+
+ desc->status &= ~IRQ_TYPE_SENSE_MASK;
+ desc->status |= type & IRQ_TYPE_SENSE_MASK;
+
update_gpio_int_params(port);
return 0;
@@ -364,7 +418,8 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
static struct irq_chip ep93xx_gpio_irq_chip = {
.name = "GPIO",
- .ack = ep93xx_gpio_irq_mask_ack,
+ .ack = ep93xx_gpio_irq_ack,
+ .mask_ack = ep93xx_gpio_irq_mask_ack,
.mask = ep93xx_gpio_irq_mask,
.unmask = ep93xx_gpio_irq_unmask,
.set_type = ep93xx_gpio_irq_type,
@@ -373,15 +428,16 @@ static struct irq_chip ep93xx_gpio_irq_chip = {
void __init ep93xx_init_irq(void)
{
- int irq;
+ int gpio_irq;
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
- for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
- set_irq_chip(irq, &ep93xx_gpio_irq_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
+ for (gpio_irq = gpio_to_irq(0);
+ gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
+ set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip);
+ set_irq_handler(gpio_irq, handle_level_irq);
+ set_irq_flags(gpio_irq, IRQF_VALID);
}
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d4d8134ce56..d55fa4e9bb4 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -440,7 +440,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
return 1;
}
-static irqreturn_t v3_irq(int irq, void *devid)
+static irqreturn_t v3_irq(int dummy, void *devid)
{
#ifdef CONFIG_DEBUG_LL
struct pt_regs *regs = get_irq_regs();
@@ -448,8 +448,10 @@ static irqreturn_t v3_irq(int irq, void *devid)
unsigned long instr = *(unsigned long *)pc;
char buf[128];
- sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", irq,
- pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
+ sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
+ "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
+ __raw_readl(SC_LBFADDR),
+ __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printascii(buf);
#endif
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 2b086ab2668..74c65ce221d 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -3,7 +3,7 @@
*
* Board support code for the GLAN Tank.
*
- * Copyright (C) 2006 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2006, 2007 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify it
@@ -21,6 +21,7 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
@@ -118,7 +119,7 @@ subsys_initcall(glantank_pci_init);
* GLAN Tank machine initialization.
*/
static struct physmap_flash_data glantank_flash_data = {
- .width = 1,
+ .width = 2,
};
static struct resource glantank_flash_resource = {
@@ -166,6 +167,13 @@ static struct platform_device glantank_serial_device = {
.resource = &glantank_uart_resource,
};
+static struct i2c_board_info __initdata glantank_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+ .type = "rs5c372a",
+ },
+};
+
static void glantank_power_off(void)
{
__raw_writeb(0x01, 0xfe8d0004);
@@ -183,6 +191,9 @@ static void __init glantank_init_machine(void)
platform_device_register(&iop3xx_dma_0_channel);
platform_device_register(&iop3xx_dma_1_channel);
+ i2c_register_board_info(0, glantank_i2c_devices,
+ ARRAY_SIZE(glantank_i2c_devices));
+
pm_power_off = glantank_power_off;
}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 16356ffc86a..5fea5a13293 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -22,7 +22,6 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index 7a85ced5671..d3a779a7a35 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -19,7 +19,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -40,7 +39,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
static int __init espresso_pci_init(void)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index c41a6b5a0ac..5c5d4d66dee 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -24,7 +24,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -44,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
/*
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index e35644961aa..f0f70ba1e46 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -23,7 +23,6 @@
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
-#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
@@ -44,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
#include <asm/mach/pci.h>
/*
diff --git a/arch/arm/mach-ixp4xx/nslu2-power.c b/arch/arm/mach-ixp4xx/nslu2-power.c
index acd71e9c38a..6f10dc20832 100644
--- a/arch/arm/mach-ixp4xx/nslu2-power.c
+++ b/arch/arm/mach-ixp4xx/nslu2-power.c
@@ -21,7 +21,6 @@
#include <linux/reboot.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/reboot.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 2a07a281fa8..730a3af12c9 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -9,7 +9,7 @@ obj-n :=
obj- :=
# PCI support is optional
-#obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_PCI) += pci.o
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 2feeef81d84..05ac2bd0402 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -40,7 +40,7 @@ static void __init micrel_init(void)
printk(KERN_INFO "Micrel KS8695 Development Board initializing\n");
#ifdef CONFIG_PCI
-// ks8695_init_pci(&micrel_pci);
+ ks8695_init_pci(&micrel_pci);
#endif
/* Add devices */
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index b1aa3cb3d4a..5e46191c0af 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -20,6 +20,8 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/module.h>
#include <asm/io.h>
@@ -216,3 +218,84 @@ int irq_to_gpio(unsigned int irq)
return (irq - KS8695_IRQ_EXTERN0);
}
EXPORT_SYMBOL(irq_to_gpio);
+
+
+/* .... Debug interface ..................................................... */
+
+#ifdef CONFIG_DEBUG_FS
+
+static int ks8695_gpio_show(struct seq_file *s, void *unused)
+{
+ unsigned int enable[] = { IOPC_IOEINT0EN, IOPC_IOEINT1EN, IOPC_IOEINT2EN, IOPC_IOEINT3EN, IOPC_IOTIM0EN, IOPC_IOTIM1EN };
+ unsigned int intmask[] = { IOPC_IOEINT0TM, IOPC_IOEINT1TM, IOPC_IOEINT2TM, IOPC_IOEINT3TM };
+ unsigned long mode, ctrl, data;
+ int i;
+
+ mode = __raw_readl(KS8695_GPIO_VA + KS8695_IOPM);
+ ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
+ data = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
+
+ seq_printf(s, "Pin\tI/O\tFunction\tState\n\n");
+
+ for (i = KS8695_GPIO_0; i <= KS8695_GPIO_15 ; i++) {
+ seq_printf(s, "%i:\t", i);
+
+ seq_printf(s, "%s\t", (mode & IOPM_(i)) ? "Output" : "Input");
+
+ if (i <= KS8695_GPIO_3) {
+ if (ctrl & enable[i]) {
+ seq_printf(s, "EXT%i ", i);
+
+ switch ((ctrl & intmask[i]) >> (4 * i)) {
+ case IOPC_TM_LOW:
+ seq_printf(s, "(Low)"); break;
+ case IOPC_TM_HIGH:
+ seq_printf(s, "(High)"); break;
+ case IOPC_TM_RISING:
+ seq_printf(s, "(Rising)"); break;
+ case IOPC_TM_FALLING:
+ seq_printf(s, "(Falling)"); break;
+ case IOPC_TM_EDGE:
+ seq_printf(s, "(Edges)"); break;
+ }
+ }
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else if (i <= KS8695_GPIO_5) {
+ if (ctrl & enable[i])
+ seq_printf(s, "TOUT%i\t", i - KS8695_GPIO_4);
+ else
+ seq_printf(s, "GPIO\t");
+ }
+ else
+ seq_printf(s, "GPIO\t");
+
+ seq_printf(s, "\t");
+
+ seq_printf(s, "%i\n", (data & IOPD_(i)) ? 1 : 0);
+ }
+ return 0;
+}
+
+static int ks8695_gpio_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ks8695_gpio_show, NULL);
+}
+
+static const struct file_operations ks8695_gpio_operations = {
+ .open = ks8695_gpio_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init ks8695_gpio_debugfs_init(void)
+{
+ /* /sys/kernel/debug/ks8695_gpio */
+ (void) debugfs_create_file("ks8695_gpio", S_IFREG | S_IRUGO, NULL, NULL, &ks8695_gpio_operations);
+ return 0;
+}
+postcore_initcall(ks8695_gpio_debugfs_init);
+
+#endif
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
new file mode 100644
index 00000000000..3f4e0330cb1
--- /dev/null
+++ b/arch/arm/mach-ks8695/pci.c
@@ -0,0 +1,326 @@
+/*
+ * arch/arm/mach-ks8695/pci.c
+ *
+ * Copyright (C) 2003, Micrel Semiconductors
+ * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com>
+ * Copyright (C) 2006, Ben Dooks
+ * Copyright (C) 2007, Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/signal.h>
+#include <asm/mach/pci.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/devices.h>
+#include <asm/arch/regs-pci.h>
+
+
+static int pci_dbg;
+static int pci_cfg_dbg;
+
+
+static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
+{
+ unsigned long pbca;
+
+ pbca = PBCA_ENABLE | (where & ~3);
+ pbca |= PCI_SLOT(devfn) << 11 ;
+ pbca |= PCI_FUNC(devfn) << 8;
+ pbca |= bus_nr << 16;
+
+ if (bus_nr == 0) {
+ /* use Type-0 transaction */
+ __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
+ } else {
+ /* use Type-1 transaction */
+ __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
+ }
+}
+
+
+/*
+ * The KS8695 datasheet prohibits anything other than 32bit accesses
+ * to the IO registers, so all our configuration must be done with
+ * 32bit operations, and the correct bit masking and shifting.
+ */
+
+static int ks8695_pci_readconfig(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *value)
+{
+ ks8695_pci_setupconfig(bus->number, devfn, where);
+
+ *value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+
+ switch (size) {
+ case 4:
+ break;
+ case 2:
+ *value = *value >> ((where & 2) * 8);
+ *value &= 0xffff;
+ break;
+ case 1:
+ *value = *value >> ((where & 3) * 8);
+ *value &= 0xff;
+ break;
+ }
+
+ if (pci_cfg_dbg) {
+ printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
+ bus->number, devfn, where, size, *value,
+ __raw_readl(KS8695_PCI_VA + KS8695_PBCD));
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int ks8695_pci_writeconfig(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 value)
+{
+ unsigned long tmp;
+
+ if (pci_cfg_dbg) {
+ printk("write: %d,%08x,%02x,%d: %08x\n",
+ bus->number, devfn, where, size, value);
+ }
+
+ ks8695_pci_setupconfig(bus->number, devfn, where);
+
+ switch (size) {
+ case 4:
+ __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ case 2:
+ tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+ tmp &= ~(0xffff << ((where & 2) * 8));
+ tmp |= value << ((where & 2) * 8);
+
+ __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ case 1:
+ tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
+ tmp &= ~(0xff << ((where & 3) * 8));
+ tmp |= value << ((where & 3) * 8);
+
+ __raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static void ks8695_local_writeconfig(int where, u32 value)
+{
+ ks8695_pci_setupconfig(0, 0, where);
+ __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
+}
+
+static struct pci_ops ks8695_pci_ops = {
+ .read = ks8695_pci_readconfig,
+ .write = ks8695_pci_writeconfig,
+};
+
+static struct pci_bus *ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
+{
+ return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
+}
+
+static struct resource pci_mem = {
+ .name = "PCI Memory space",
+ .start = KS8695_PCIMEM_PA,
+ .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource pci_io = {
+ .name = "PCI IO space",
+ .start = KS8695_PCIIO_PA,
+ .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
+ .flags = IORESOURCE_IO,
+};
+
+static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
+{
+ if (nr > 0)
+ return 0;
+
+ request_resource(&iomem_resource, &pci_mem);
+ request_resource(&ioport_resource, &pci_io);
+
+ sys->resource[0] = &pci_io;
+ sys->resource[1] = &pci_mem;
+ sys->resource[2] = NULL;
+
+ /* Assign and enable processor bridge */
+ ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
+
+ /* Enable bus-master & Memory Space access */
+ ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+
+ /* Set cache-line size & latency. */
+ ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
+
+ /* Reserve PCI memory space for PCI-AHB resources */
+ if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
+ printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
+ return -EBUSY;
+ }
+
+ return 1;
+}
+
+static inline unsigned int size_mask(unsigned long size)
+{
+ return (~size) + 1;
+}
+
+static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+ unsigned long instr = *(unsigned long *)pc;
+ unsigned long cmdstat;
+
+ cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
+
+ printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
+ addr, fsr, regs->ARM_pc, regs->ARM_lr,
+ cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
+ cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
+ cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
+ cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
+ cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " "
+ );
+
+ __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
+
+ /*
+ * If the instruction being executed was a read,
+ * make it look like it read all-ones.
+ */
+ if ((instr & 0x0c100000) == 0x04100000) {
+ int reg = (instr >> 12) & 15;
+ unsigned long val;
+
+ if (instr & 0x00400000)
+ val = 255;
+ else
+ val = -1;
+
+ regs->uregs[reg] = val;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ if ((instr & 0x0e100090) == 0x00100090) {
+ int reg = (instr >> 12) & 15;
+
+ regs->uregs[reg] = -1;
+ regs->ARM_pc += 4;
+ return 0;
+ }
+
+ return 1;
+}
+
+static void __init ks8695_pci_preinit(void)
+{
+ /* stage 1 initialization, subid, subdevice = 0x0001 */
+ __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
+
+ /* stage 2 initialization */
+ /* prefetch limits with 16 words, retry enable */
+ __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
+
+ /* configure memory mapping */
+ __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
+ __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
+ __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
+ __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
+
+ /* configure IO mapping */
+ __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
+ __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
+ __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
+ __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
+
+ /* hook in fault handlers */
+ hook_fault_code(8, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+ hook_fault_code(10, ks8695_pci_fault, SIGBUS, "external abort on non-linefetch");
+}
+
+static void ks8695_show_pciregs(void)
+{
+ if (!pci_dbg)
+ return;
+
+ printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
+ printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
+ printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
+ printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
+ printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
+ printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
+ printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
+
+ printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
+ printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
+
+ printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
+ printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
+ printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
+ printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
+
+ printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
+ printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
+ printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
+ printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
+}
+
+
+static struct hw_pci ks8695_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = ks8695_pci_preinit,
+ .setup = ks8695_pci_setup,
+ .scan = ks8695_pci_scan_bus,
+ .postinit = NULL,
+ .swizzle = pci_std_swizzle,
+ .map_irq = NULL,
+};
+
+void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
+{
+ if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
+ printk("PCI: KS8695 in guest mode, not initialising\n");
+ return;
+ }
+
+ printk(KERN_INFO "PCI: Initialising\n");
+ ks8695_show_pciregs();
+
+ /* set Mode */
+ __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
+
+ ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */
+
+ pci_common_init(&ks8695_pci);
+}
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
new file mode 100644
index 00000000000..3553babbbf0
--- /dev/null
+++ b/arch/arm/mach-msm/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MSM7X00A
+
+comment "MSM7X00A Board Type"
+ depends on ARCH_MSM7X00A
+
+config MACH_HALIBUT
+ depends on ARCH_MSM7X00A
+ default y
+ bool "Halibut Board (QCT SURF7200A)"
+ help
+ Support for the Qualcomm SURF7200A eval board.
+
+config MSM7X00A_IDLE
+ depends on ARCH_MSM7X00A
+ default y
+ bool "Idle Support for MSM7X00A"
+
+endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
new file mode 100644
index 00000000000..d12f2365585
--- /dev/null
+++ b/arch/arm/mach-msm/Makefile
@@ -0,0 +1,7 @@
+obj-y += io.o idle.o irq.o timer.o dma.o
+
+# Common code for board init
+obj-y += common.o
+
+obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
+
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
new file mode 100644
index 00000000000..24dfbf8c07c
--- /dev/null
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -0,0 +1,3 @@
+ zreladdr-y := 0x10008000
+params_phys-y := 0x10000100
+initrd_phys-y := 0x10800000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
new file mode 100644
index 00000000000..86dfb2b5261
--- /dev/null
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -0,0 +1,114 @@
+/* linux/arch/arm/mach-msm/board-halibut.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/io.h>
+#include <asm/delay.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = 0x9C004300,
+ .end = 0x9C004400,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = MSM_GPIO_TO_INT(49),
+ .end = MSM_GPIO_TO_INT(49),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static void mddi0_panel_power(int on)
+{
+}
+
+static struct msm_mddi_platform_data msm_mddi0_pdata = {
+ .panel_power = mddi0_panel_power,
+ .has_vsync_irq = 0,
+};
+
+static struct platform_device msm_mddi0_device = {
+ .name = "msm_mddi",
+ .id = 0,
+ .dev = {
+ .platform_data = &msm_mddi0_pdata
+ },
+};
+
+static struct platform_device msm_serial0_device = {
+ .name = "msm_serial",
+ .id = 0,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &msm_serial0_device,
+ &msm_mddi0_device,
+ &smc91x_device,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init halibut_init_irq(void)
+{
+ msm_init_irq();
+}
+
+static void __init halibut_init(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ msm_add_devices();
+}
+
+static void __init halibut_map_io(void)
+{
+ msm_map_common_io();
+}
+
+MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
+
+/* UART for LL DEBUG */
+ .phys_io = MSM_UART1_PHYS,
+ .io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc,
+
+ .boot_params = 0x10000100,
+ .map_io = halibut_map_io,
+ .init_irq = halibut_init_irq,
+ .init_machine = halibut_init,
+ .timer = &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
new file mode 100644
index 00000000000..3f5d3362f88
--- /dev/null
+++ b/arch/arm/mach-msm/common.c
@@ -0,0 +1,116 @@
+/* linux/arch/arm/mach-msm/common.c
+ *
+ * Common setup code for MSM7K Boards
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/flash.h>
+#include <asm/io.h>
+
+#include <asm/setup.h>
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/arch/board.h>
+
+struct flash_platform_data msm_nand_data = {
+ .parts = 0,
+ .nr_parts = 0,
+};
+
+static struct resource msm_nand_resources[] = {
+ [0] = {
+ .start = 7,
+ .end = 7,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device msm_nand_device = {
+ .name = "msm_nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(msm_nand_resources),
+ .resource = msm_nand_resources,
+ .dev = {
+ .platform_data = &msm_nand_data,
+ },
+};
+
+static struct platform_device msm_smd_device = {
+ .name = "msm_smd",
+ .id = -1,
+};
+
+static struct resource msm_i2c_resources[] = {
+ {
+ .start = MSM_I2C_BASE,
+ .end = MSM_I2C_BASE + MSM_I2C_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_PWB_I2C,
+ .end = INT_PWB_I2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msm_i2c_device = {
+ .name = "msm_i2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(msm_i2c_resources),
+ .resource = msm_i2c_resources,
+};
+
+static struct resource usb_resources[] = {
+ {
+ .start = MSM_HSUSB_PHYS,
+ .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_USB_HS,
+ .end = INT_USB_HS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device msm_hsusb_device = {
+ .name = "msm_hsusb",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(usb_resources),
+ .resource = usb_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct platform_device *devices[] __initdata = {
+ &msm_nand_device,
+ &msm_smd_device,
+ &msm_i2c_device,
+ &msm_hsusb_device,
+};
+
+void __init msm_add_devices(void)
+{
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
new file mode 100644
index 00000000000..8b0f339b327
--- /dev/null
+++ b/arch/arm/mach-msm/dma.c
@@ -0,0 +1,214 @@
+/* linux/arch/arm/mach-msm/dma.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <asm/arch/dma.h>
+
+#define MSM_DMOV_CHANNEL_COUNT 16
+
+enum {
+ MSM_DMOV_PRINT_ERRORS = 1,
+ MSM_DMOV_PRINT_IO = 2,
+ MSM_DMOV_PRINT_FLOW = 4
+};
+
+static DEFINE_SPINLOCK(msm_dmov_lock);
+static struct msm_dmov_cmd active_command;
+static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT];
+static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT];
+unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS;
+
+#define MSM_DMOV_DPRINTF(mask, format, args...) \
+ do { \
+ if ((mask) & msm_dmov_print_mask) \
+ printk(KERN_ERR format, args); \
+ } while (0)
+#define PRINT_ERROR(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_ERRORS, format, args);
+#define PRINT_IO(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_IO, format, args);
+#define PRINT_FLOW(format, args...) \
+ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args);
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd)
+{
+ unsigned long irq_flags;
+ unsigned int status;
+
+ spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+ status = readl(DMOV_STATUS(id));
+ if (list_empty(&ready_commands[id]) &&
+ (status & DMOV_STATUS_CMD_PTR_RDY)) {
+#if 0
+ if (list_empty(&active_commands[id])) {
+ PRINT_FLOW("msm_dmov_enqueue_cmd(%d), enable interrupt\n", id);
+ writel(DMOV_CONFIG_IRQ_EN, DMOV_CONFIG(id));
+ }
+#endif
+ PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status);
+ list_add_tail(&cmd->list, &active_commands[id]);
+ writel(cmd->cmdptr, DMOV_CMD_PTR(id));
+ } else {
+ if (list_empty(&active_commands[id]))
+ PRINT_ERROR("msm_dmov_enqueue_cmd(%d), error datamover stalled, status %x\n", id, status);
+
+ PRINT_IO("msm_dmov_enqueue_cmd(%d), enqueue command, status %x\n", id, status);
+ list_add_tail(&cmd->list, &ready_commands[id]);
+ }
+ spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
+}
+
+struct msm_dmov_exec_cmdptr_cmd {
+ struct msm_dmov_cmd dmov_cmd;
+ struct completion complete;
+ unsigned id;
+ unsigned int result;
+ unsigned int flush[6];
+};
+
+static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result)
+{
+ struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd);
+ cmd->result = result;
+ if (result != 0x80000002) {
+ cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id));
+ cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id));
+ cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id));
+ cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id));
+ cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id));
+ cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id));
+ }
+ complete(&cmd->complete);
+}
+
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr)
+{
+ struct msm_dmov_exec_cmdptr_cmd cmd;
+
+ PRINT_FLOW("dmov_exec_cmdptr(%d, %x)\n", id, cmdptr);
+
+ cmd.dmov_cmd.cmdptr = cmdptr;
+ cmd.dmov_cmd.complete_func = dmov_exec_cmdptr_complete_func;
+ cmd.id = id;
+ init_completion(&cmd.complete);
+
+ msm_dmov_enqueue_cmd(id, &cmd.dmov_cmd);
+ wait_for_completion(&cmd.complete);
+
+ if (cmd.result != 0x80000002) {
+ PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result);
+ PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n",
+ id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]);
+ return -EIO;
+ }
+ PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr);
+ return 0;
+}
+
+
+static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id)
+{
+ unsigned int int_status, mask, id;
+ unsigned long irq_flags;
+ unsigned int ch_status;
+ unsigned int ch_result;
+ struct msm_dmov_cmd *cmd;
+
+ spin_lock_irqsave(&msm_dmov_lock, irq_flags);
+
+ int_status = readl(DMOV_ISR); /* read and clear interrupt */
+ PRINT_FLOW("msm_datamover_irq_handler: DMOV_ISR %x\n", int_status);
+
+ while (int_status) {
+ mask = int_status & -int_status;
+ id = fls(mask) - 1;
+ PRINT_FLOW("msm_datamover_irq_handler %08x %08x id %d\n", int_status, mask, id);
+ int_status &= ~mask;
+ ch_status = readl(DMOV_STATUS(id));
+ if (!(ch_status & DMOV_STATUS_RSLT_VALID)) {
+ PRINT_FLOW("msm_datamover_irq_handler id %d, result not valid %x\n", id, ch_status);
+ continue;
+ }
+ do {
+ ch_result = readl(DMOV_RSLT(id));
+ if (list_empty(&active_commands[id])) {
+ PRINT_ERROR("msm_datamover_irq_handler id %d, got result "
+ "with no active command, status %x, result %x\n",
+ id, ch_status, ch_result);
+ cmd = NULL;
+ } else
+ cmd = list_entry(active_commands[id].next, typeof(*cmd), list);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x, result %x\n", id, ch_status, ch_result);
+ if (ch_result & DMOV_RSLT_DONE) {
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n",
+ id, ch_status);
+ PRINT_IO("msm_datamover_irq_handler id %d, got result "
+ "for %p, result %x\n", id, cmd, ch_result);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ }
+ if (ch_result & DMOV_RSLT_FLUSH) {
+ unsigned int flush0 = readl(DMOV_FLUSH0(id));
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ }
+ if (ch_result & DMOV_RSLT_ERROR) {
+ unsigned int flush0 = readl(DMOV_FLUSH0(id));
+ PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0);
+ if (cmd) {
+ list_del(&cmd->list);
+ cmd->complete_func(cmd, ch_result);
+ }
+ /* this does not seem to work, once we get an error */
+ /* the datamover will no longer accept commands */
+ writel(0, DMOV_FLUSH0(id));
+ }
+ ch_status = readl(DMOV_STATUS(id));
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) {
+ cmd = list_entry(ready_commands[id].next, typeof(*cmd), list);
+ list_del(&cmd->list);
+ list_add_tail(&cmd->list, &active_commands[id]);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id);
+ writel(cmd->cmdptr, DMOV_CMD_PTR(id));
+ }
+ } while (ch_status & DMOV_STATUS_RSLT_VALID);
+ PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status);
+ }
+ spin_unlock_irqrestore(&msm_dmov_lock, irq_flags);
+ return IRQ_HANDLED;
+}
+
+static int __init msm_init_datamover(void)
+{
+ int i;
+ for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) {
+ INIT_LIST_HEAD(&ready_commands[i]);
+ INIT_LIST_HEAD(&active_commands[i]);
+ writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i));
+ }
+ return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL);
+}
+
+arch_initcall(msm_init_datamover);
+
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
new file mode 100644
index 00000000000..2b1cb7f1694
--- /dev/null
+++ b/arch/arm/mach-msm/idle.S
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-msm/idle.S
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(arch_idle)
+#ifdef CONFIG_MSM7X00A_IDLE
+ mrc p15, 0, r1, c1, c0, 0 /* read current CR */
+ bic r0, r1, #(1 << 2) /* clear dcache bit */
+ bic r0, r0, #(1 << 12) /* clear icache bit */
+ mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
+
+ mov r0, #0 /* prepare wfi value */
+ mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
+ mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
+ mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
+
+ mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
+#endif
+ mov pc, lr
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
new file mode 100644
index 00000000000..c39edb994a8
--- /dev/null
+++ b/arch/arm/mach-msm/io.c
@@ -0,0 +1,85 @@
+/* arch/arm/mach-msm/io.c
+ *
+ * MSM7K io support
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/arch/msm_iomap.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/board.h>
+
+#define MSM_DEVICE(name) { \
+ .virtual = MSM_##name##_BASE, \
+ .pfn = __phys_to_pfn(MSM_##name##_PHYS), \
+ .length = MSM_##name##_SIZE, \
+ .type = MT_DEVICE_NONSHARED, \
+ }
+
+static struct map_desc msm_io_desc[] __initdata = {
+ MSM_DEVICE(VIC),
+ MSM_DEVICE(CSR),
+ MSM_DEVICE(GPT),
+ MSM_DEVICE(DMOV),
+ MSM_DEVICE(UART1),
+ MSM_DEVICE(UART2),
+ MSM_DEVICE(UART3),
+ MSM_DEVICE(I2C),
+ MSM_DEVICE(GPIO1),
+ MSM_DEVICE(GPIO2),
+ MSM_DEVICE(HSUSB),
+ MSM_DEVICE(CLK_CTL),
+ MSM_DEVICE(PMDH),
+ MSM_DEVICE(EMDH),
+ MSM_DEVICE(MDP),
+ {
+ .virtual = MSM_SHARED_RAM_BASE,
+ .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS),
+ .length = MSM_SHARED_RAM_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init msm_map_common_io(void)
+{
+ /* Make sure the peripheral register window is closed, since
+ * we will use PTE flags (TEX[1]=1,B=0,C=1) to determine which
+ * pages are peripheral interface or not.
+ */
+ asm("mcr p15, 0, %0, c15, c2, 4" : : "r" (0));
+
+ iotable_init(msm_io_desc, ARRAY_SIZE(msm_io_desc));
+}
+
+void __iomem *
+__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+{
+ if (mtype == MT_DEVICE) {
+ /* The peripherals in the 88000000 - D0000000 range
+ * are only accessable by type MT_DEVICE_NONSHARED.
+ * Adjust mtype as necessary to make this "just work."
+ */
+ if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
+ mtype = MT_DEVICE_NONSHARED;
+ }
+
+ return __arm_ioremap(phys_addr, size, mtype);
+}
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
new file mode 100644
index 00000000000..24158040b78
--- /dev/null
+++ b/arch/arm/mach-msm/irq.c
@@ -0,0 +1,154 @@
+/* linux/arch/arm/mach-msm/irq.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/timer.h>
+
+#include <linux/irq.h>
+#include <asm/hardware.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/msm_iomap.h>
+
+#define VIC_REG(off) (MSM_VIC_BASE + (off))
+
+#define VIC_INT_SELECT0 VIC_REG(0x0000) /* 1: FIQ, 0: IRQ */
+#define VIC_INT_SELECT1 VIC_REG(0x0004) /* 1: FIQ, 0: IRQ */
+#define VIC_INT_EN0 VIC_REG(0x0010)
+#define VIC_INT_EN1 VIC_REG(0x0014)
+#define VIC_INT_ENCLEAR0 VIC_REG(0x0020)
+#define VIC_INT_ENCLEAR1 VIC_REG(0x0024)
+#define VIC_INT_ENSET0 VIC_REG(0x0030)
+#define VIC_INT_ENSET1 VIC_REG(0x0034)
+#define VIC_INT_TYPE0 VIC_REG(0x0040) /* 1: EDGE, 0: LEVEL */
+#define VIC_INT_TYPE1 VIC_REG(0x0044) /* 1: EDGE, 0: LEVEL */
+#define VIC_INT_POLARITY0 VIC_REG(0x0050) /* 1: NEG, 0: POS */
+#define VIC_INT_POLARITY1 VIC_REG(0x0054) /* 1: NEG, 0: POS */
+#define VIC_NO_PEND_VAL VIC_REG(0x0060)
+#define VIC_INT_MASTEREN VIC_REG(0x0064) /* 1: IRQ, 2: FIQ */
+#define VIC_PROTECTION VIC_REG(0x006C) /* 1: ENABLE */
+#define VIC_CONFIG VIC_REG(0x0068) /* 1: USE ARM1136 VIC */
+#define VIC_IRQ_STATUS0 VIC_REG(0x0080)
+#define VIC_IRQ_STATUS1 VIC_REG(0x0084)
+#define VIC_FIQ_STATUS0 VIC_REG(0x0090)
+#define VIC_FIQ_STATUS1 VIC_REG(0x0094)
+#define VIC_RAW_STATUS0 VIC_REG(0x00A0)
+#define VIC_RAW_STATUS1 VIC_REG(0x00A4)
+#define VIC_INT_CLEAR0 VIC_REG(0x00B0)
+#define VIC_INT_CLEAR1 VIC_REG(0x00B4)
+#define VIC_SOFTINT0 VIC_REG(0x00C0)
+#define VIC_SOFTINT1 VIC_REG(0x00C4)
+#define VIC_IRQ_VEC_RD VIC_REG(0x00D0) /* pending int # */
+#define VIC_IRQ_VEC_PEND_RD VIC_REG(0x00D4) /* pending vector addr */
+#define VIC_IRQ_VEC_WR VIC_REG(0x00D8)
+#define VIC_IRQ_IN_SERVICE VIC_REG(0x00E0)
+#define VIC_IRQ_IN_STACK VIC_REG(0x00E4)
+#define VIC_TEST_BUS_SEL VIC_REG(0x00E8)
+
+#define VIC_VECTPRIORITY(n) VIC_REG(0x0200+((n) * 4))
+#define VIC_VECTADDR(n) VIC_REG(0x0400+((n) * 4))
+
+static void msm_irq_ack(unsigned int irq)
+{
+ unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0);
+ irq = 1 << (irq & 31);
+ writel(irq, reg);
+}
+
+static void msm_irq_mask(unsigned int irq)
+{
+ unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0);
+ writel(1 << (irq & 31), reg);
+}
+
+static void msm_irq_unmask(unsigned int irq)
+{
+ unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0);
+ writel(1 << (irq & 31), reg);
+}
+
+static int msm_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ return -EINVAL;
+}
+
+static int msm_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0);
+ unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0);
+ int b = 1 << (irq & 31);
+
+ if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW))
+ writel(readl(preg) | b, preg);
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
+ writel(readl(preg) & (~b), preg);
+
+ if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
+ writel(readl(treg) | b, treg);
+ set_irq_handler(irq, handle_edge_irq);
+ }
+ if (flow_type & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW)) {
+ writel(readl(treg) & (~b), treg);
+ set_irq_handler(irq, handle_level_irq);
+ }
+ return 0;
+}
+
+static struct irq_chip msm_irq_chip = {
+ .name = "msm",
+ .ack = msm_irq_ack,
+ .mask = msm_irq_mask,
+ .unmask = msm_irq_unmask,
+ .set_wake = msm_irq_set_wake,
+ .set_type = msm_irq_set_type,
+};
+
+void __init msm_init_irq(void)
+{
+ unsigned n;
+
+ /* select level interrupts */
+ writel(0, VIC_INT_TYPE0);
+ writel(0, VIC_INT_TYPE1);
+
+ /* select highlevel interrupts */
+ writel(0, VIC_INT_POLARITY0);
+ writel(0, VIC_INT_POLARITY1);
+
+ /* select IRQ for all INTs */
+ writel(0, VIC_INT_SELECT0);
+ writel(0, VIC_INT_SELECT1);
+
+ /* disable all INTs */
+ writel(0, VIC_INT_EN0);
+ writel(0, VIC_INT_EN1);
+
+ /* don't use 1136 vic */
+ writel(0, VIC_CONFIG);
+
+ /* enable interrupt controller */
+ writel(1, VIC_INT_MASTEREN);
+
+ for (n = 0; n < NR_MSM_IRQS; n++) {
+ set_irq_chip(n, &msm_irq_chip);
+ set_irq_handler(n, handle_level_irq);
+ set_irq_flags(n, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
new file mode 100644
index 00000000000..bd4732d1ab3
--- /dev/null
+++ b/arch/arm/mach-msm/timer.c
@@ -0,0 +1,205 @@
+/* linux/arch/arm/mach-msm/timer.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <asm/mach/time.h>
+#include <asm/arch/msm_iomap.h>
+
+#include <asm/io.h>
+
+#define MSM_DGT_BASE (MSM_GPT_BASE + 0x10)
+#define MSM_DGT_SHIFT (5)
+
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0004
+#define TIMER_ENABLE 0x0008
+#define TIMER_ENABLE_CLR_ON_MATCH_EN 2
+#define TIMER_ENABLE_EN 1
+#define TIMER_CLEAR 0x000C
+
+#define CSR_PROTECTION 0x0020
+#define CSR_PROTECTION_EN 1
+
+#define GPT_HZ 32768
+#define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
+
+struct msm_clock {
+ struct clock_event_device clockevent;
+ struct clocksource clocksource;
+ struct irqaction irq;
+ uint32_t regbase;
+ uint32_t freq;
+ uint32_t shift;
+};
+
+static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static cycle_t msm_gpt_read(void)
+{
+ return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
+}
+
+static cycle_t msm_dgt_read(void)
+{
+ return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
+}
+
+static int msm_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
+ uint32_t now = readl(clock->regbase + TIMER_COUNT_VAL);
+ uint32_t alarm = now + (cycles << clock->shift);
+ int late;
+
+ writel(alarm, clock->regbase + TIMER_MATCH_VAL);
+ now = readl(clock->regbase + TIMER_COUNT_VAL);
+ late = now - alarm;
+ if (late >= (-2 << clock->shift) && late < DGT_HZ*5) {
+ printk(KERN_NOTICE "msm_timer_set_next_event(%lu) clock %s, "
+ "alarm already expired, now %x, alarm %x, late %d\n",
+ cycles, clock->clockevent.name, now, alarm, late);
+ return -ETIME;
+ }
+ return 0;
+}
+
+static void msm_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct msm_clock *clock = container_of(evt, struct msm_clock, clockevent);
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel(TIMER_ENABLE_EN, clock->regbase + TIMER_ENABLE);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(0, clock->regbase + TIMER_ENABLE);
+ break;
+ }
+}
+
+static struct msm_clock msm_clocks[] = {
+ {
+ .clockevent = {
+ .name = "gp_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32,
+ .rating = 200,
+ .set_next_event = msm_timer_set_next_event,
+ .set_mode = msm_timer_set_mode,
+ },
+ .clocksource = {
+ .name = "gp_timer",
+ .rating = 200,
+ .read = msm_gpt_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+ .irq = {
+ .name = "gp_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
+ .handler = msm_timer_interrupt,
+ .dev_id = &msm_clocks[0].clockevent,
+ .irq = INT_GP_TIMER_EXP
+ },
+ .regbase = MSM_GPT_BASE,
+ .freq = GPT_HZ
+ },
+ {
+ .clockevent = {
+ .name = "dg_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .shift = 32 + MSM_DGT_SHIFT,
+ .rating = 300,
+ .set_next_event = msm_timer_set_next_event,
+ .set_mode = msm_timer_set_mode,
+ },
+ .clocksource = {
+ .name = "dg_timer",
+ .rating = 300,
+ .read = msm_dgt_read,
+ .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
+ .shift = 24 - MSM_DGT_SHIFT,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+ .irq = {
+ .name = "dg_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
+ .handler = msm_timer_interrupt,
+ .dev_id = &msm_clocks[1].clockevent,
+ .irq = INT_DEBUG_TIMER_EXP
+ },
+ .regbase = MSM_DGT_BASE,
+ .freq = DGT_HZ >> MSM_DGT_SHIFT,
+ .shift = MSM_DGT_SHIFT
+ }
+};
+
+static void __init msm_timer_init(void)
+{
+ int i;
+ int res;
+
+ for (i = 0; i < ARRAY_SIZE(msm_clocks); i++) {
+ struct msm_clock *clock = &msm_clocks[i];
+ struct clock_event_device *ce = &clock->clockevent;
+ struct clocksource *cs = &clock->clocksource;
+ writel(0, clock->regbase + TIMER_ENABLE);
+ writel(0, clock->regbase + TIMER_CLEAR);
+ writel(~0, clock->regbase + TIMER_MATCH_VAL);
+
+ ce->mult = div_sc(clock->freq, NSEC_PER_SEC, ce->shift);
+ /* allow at least 10 seconds to notice that the timer wrapped */
+ ce->max_delta_ns =
+ clockevent_delta2ns(0xf0000000 >> clock->shift, ce);
+ /* 4 gets rounded down to 3 */
+ ce->min_delta_ns = clockevent_delta2ns(4, ce);
+ ce->cpumask = cpumask_of_cpu(0);
+
+ cs->mult = clocksource_hz2mult(clock->freq, cs->shift);
+ res = clocksource_register(cs);
+ if (res)
+ printk(KERN_ERR "msm_timer_init: clocksource_register "
+ "failed for %s\n", cs->name);
+
+ res = setup_irq(clock->irq.irq, &clock->irq);
+ if (res)
+ printk(KERN_ERR "msm_timer_init: setup_irq "
+ "failed for %s\n", cs->name);
+
+ clockevents_register_device(ce);
+ }
+}
+
+struct sys_timer msm_timer = {
+ .init = msm_timer_init
+};
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 182a98a9df4..e2c8ffd75cf 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -32,7 +32,6 @@
#include <asm/arch/common.h>
#include <asm/arch/dsp_common.h>
#include <asm/arch/aic23.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/omapfb.h>
#include <asm/arch/lcd_mipid.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5b575e687a2..4e016179f31 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -31,7 +31,6 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index e47010fec27..ed7094a7006 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -42,7 +42,6 @@
#include <asm/arch/common.h>
#include <asm/arch/omap-alsa.h>
-#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c275d517764..a9a0f6610c3 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -44,7 +44,6 @@
#include <asm/arch/common.h>
#include <asm/arch/omap-alsa.h>
-#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index d9805e3d930..06b7e54a012 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -639,7 +639,7 @@ static void omap_pm_finish(void)
}
-static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
+static irqreturn_t omap_wakeup_interrupt(int irq, void *dev)
{
return IRQ_HANDLED;
}
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 3bb49c17c85..94e38cc2bb6 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,7 +26,6 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/leds.h>
-#include <linux/irq.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 422afee8816..b2eb38543d1 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -67,7 +67,7 @@ static int use_count[PXA_SSP_PORTS] = {0, 0, 0};
static irqreturn_t ssp_interrupt(int irq, void *dev_id)
{
- struct ssp_dev *dev = (struct ssp_dev*) dev_id;
+ struct ssp_dev *dev = dev_id;
unsigned int status = SSSR_P(dev->port);
SSSR_P(dev->port) = status; /* clear status bits */
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 587864fe25f..66175471fff 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -530,7 +530,7 @@ static struct s3c2410fb_mach_info __initdata bast_fb_info = {
.displays = bast_lcd_info,
.num_displays = ARRAY_SIZE(bast_lcd_info),
- .default_display = 4,
+ .default_display = 1,
};
/* Standard BAST devices */
@@ -540,7 +540,6 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
- &s3c_device_iis,
&s3c_device_rtc,
&s3c_device_nand,
&bast_device_nor,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 9f43f3f124f..3aade7b78fe 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -365,7 +365,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
- &s3c_device_iis,
&s3c_device_adc,
&serial_device,
&vr1000_nor,
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index bcd562ac1d3..6aec86a5da5 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -60,7 +60,7 @@ usb_simtec_powercontrol(int port, int to)
static irqreturn_t
usb_simtec_ocirq(int irq, void *pw)
{
- struct s3c2410_hcd_info *info = (struct s3c2410_hcd_info *)pw;
+ struct s3c2410_hcd_info *info = pw;
if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 8e8fe48ea47..0b43431d4b7 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -10,6 +10,7 @@ config CPU_S3C2412
select CPU_LLSERIAL_S3C2440
select S3C2412_PM if PM
select S3C2412_DMA if S3C2410_DMA
+ select S3C2410_GPIO
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index f8e011691b3..267f3348301 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -12,8 +12,9 @@ obj- :=
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += irq.o
obj-$(CONFIG_CPU_S3C2412) += clock.o
+obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
-obj-$(CONFIG_S3C2412_PM) += pm.o
+obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
# Machine support
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 45899360189..2697a65ba72 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -217,7 +217,7 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
if (parent == &clk_mdivclk)
clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
- else if (parent == &clk_upll)
+ else if (parent == &clk_mpll)
clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
else
return -EINVAL;
@@ -234,6 +234,45 @@ static struct clk clk_msysclk = {
.set_parent = s3c2412_setparent_msysclk,
};
+static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+ unsigned long clkdiv;
+ unsigned long dvs;
+
+ /* Note, we current equate fclk andf msysclk for S3C2412 */
+
+ if (parent == &clk_msysclk || parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2412_CLKDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ /* update this under irq lockdown, clkdivn is not protected
+ * by the clock system. */
+
+ local_irq_save(flags);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
+ clkdiv |= dvs;
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static struct clk clk_armclk = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_msysclk,
+ .set_parent = s3c2412_setparent_armclk,
+};
+
/* these next clocks have an divider immediately after them,
* so we can register them with their divider and leave out the
* intermediate clock stage
@@ -630,11 +669,13 @@ static struct clk *clks[] __initdata = {
&clk_erefclk,
&clk_urefclk,
&clk_mrefclk,
+ &clk_armclk,
};
int __init s3c2412_baseclk_add(void)
{
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+ unsigned int dvs;
struct clk *clkp;
int ret;
int ptr;
@@ -643,6 +684,8 @@ int __init s3c2412_baseclk_add(void)
clk_usb_bus.parent = &clk_usbsrc;
clk_usb_bus.rate = 0x0;
+ clk_f.parent = &clk_msysclk;
+
s3c2412_clk_initparents();
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
@@ -655,6 +698,15 @@ int __init s3c2412_baseclk_add(void)
}
}
+ /* set the dvs state according to what we got at boot time */
+
+ dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
+
+ if (dvs)
+ clk_armclk.parent = &clk_h;
+
+ printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
+
/* ensure usb bus clock is within correct rate of 48MHz */
if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 53c1d5bbce1..1dd86499356 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -30,6 +30,7 @@
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/regs-sdi.h>
+#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
@@ -39,106 +40,141 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = {
[DMACH_XD0] = {
.name = "xdreq0",
.channels = MAP(S3C2412_DMAREQSEL_XDREQ0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ0),
},
[DMACH_XD1] = {
.name = "xdreq1",
.channels = MAP(S3C2412_DMAREQSEL_XDREQ1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_XDREQ1),
},
[DMACH_SDI] = {
.name = "sdi",
.channels = MAP(S3C2412_DMAREQSEL_SDI),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SDI),
+ .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA,
+ .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA,
},
[DMACH_SPI0] = {
.name = "spi0",
.channels = MAP(S3C2412_DMAREQSEL_SPI0TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX),
.hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
.hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
},
[DMACH_SPI1] = {
.name = "spi1",
.channels = MAP(S3C2412_DMAREQSEL_SPI1TX),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX),
.hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT,
.hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT,
},
[DMACH_UART0] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0),
.hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0),
.hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_0),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0),
.hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_UART0_SRC2] = {
.name = "uart0",
.channels = MAP(S3C2412_DMAREQSEL_UART0_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1),
.hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
},
[DMACH_UART1_SRC2] = {
.name = "uart1",
.channels = MAP(S3C2412_DMAREQSEL_UART1_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1),
.hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
},
[DMACH_UART2_SRC2] = {
.name = "uart2",
.channels = MAP(S3C2412_DMAREQSEL_UART2_1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1),
.hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
.hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
},
[DMACH_TIMER] = {
.name = "timer",
.channels = MAP(S3C2412_DMAREQSEL_TIMER),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_TIMER),
},
[DMACH_I2S_IN] = {
.name = "i2s-sdi",
.channels = MAP(S3C2412_DMAREQSEL_I2SRX),
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2SRX),
+ .hw_addr.from = S3C2410_PA_IIS + S3C2412_IISRXD,
},
[DMACH_I2S_OUT] = {
.name = "i2s-sdo",
.channels = MAP(S3C2412_DMAREQSEL_I2STX),
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .channels_rx = MAP(S3C2412_DMAREQSEL_I2STX),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2412_IISTXD,
},
[DMACH_USB_EP1] = {
.name = "usb-ep1",
.channels = MAP(S3C2412_DMAREQSEL_USBEP1),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP1),
},
[DMACH_USB_EP2] = {
.name = "usb-ep2",
.channels = MAP(S3C2412_DMAREQSEL_USBEP2),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP2),
},
[DMACH_USB_EP3] = {
.name = "usb-ep3",
.channels = MAP(S3C2412_DMAREQSEL_USBEP3),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP3),
},
[DMACH_USB_EP4] = {
.name = "usb-ep4",
.channels = MAP(S3C2412_DMAREQSEL_USBEP4),
+ .channels_rx = MAP(S3C2412_DMAREQSEL_USBEP4),
},
};
+static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map,
+ enum s3c2410_dmasrc dir)
+{
+ unsigned long chsel;
+
+ if (dir == S3C2410_DMASRC_HW)
+ chsel = map->channels_rx[0];
+ else
+ chsel = map->channels[0];
+
+ chsel &= ~DMA_CH_VALID;
+ chsel |= S3C2412_DMAREQSEL_HW;
+
+ writel(chsel, chan->regs + S3C2412_DMA_DMAREQSEL);
+}
+
static void s3c2412_dma_select(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map)
{
- writel(map->channels[0] | S3C2412_DMAREQSEL_HW,
- chan->regs + S3C2412_DMA_DMAREQSEL);
+ s3c2412_dma_direction(chan, map, chan->source);
}
static struct s3c24xx_dma_selection __initdata s3c2412_dma_sel = {
.select = s3c2412_dma_select,
+ .direction = s3c2412_dma_direction,
.dcon_mask = 0,
.map = s3c2412_dma_mappings,
.map_size = ARRAY_SIZE(s3c2412_dma_mappings),
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
new file mode 100644
index 00000000000..8e55c3a2eab
--- /dev/null
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -0,0 +1,60 @@
+/* linux/arch/arm/mach-s3c2412/gpio.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://armlinux.simtec.co.uk/.
+ *
+ * S3C2412/S3C2413 specific GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/hardware.h>
+
+int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ unsigned long flags;
+ unsigned long slpcon;
+
+ offs *= 2;
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return -EINVAL;
+
+ if (pin >= S3C2410_GPIO_BANKF &&
+ pin <= S3C2410_GPIO_BANKG)
+ return -EINVAL;
+
+ if (pin > (S3C2410_GPIO_BANKH + 32))
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ slpcon = __raw_readl(base + 0x0C);
+
+ slpcon &= ~(3 << offs);
+ slpcon |= state << offs;
+
+ __raw_writel(slpcon, base + 0x0C);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index e9d0c769f5d..cc1917bf952 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -33,6 +33,7 @@
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-power.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/irq.h>
@@ -153,6 +154,22 @@ static struct irq_chip s3c2412_irq_cfsdi = {
.unmask = s3c2412_irq_cfsdi_unmask,
};
+static int s3c2412_irq_rtc_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long pwrcfg;
+
+ pwrcfg = __raw_readl(S3C2412_PWRCFG);
+ if (state)
+ pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
+ else
+ pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
+ __raw_writel(pwrcfg, S3C2412_PWRCFG);
+
+ return s3c_irq_chip.set_wake(irqno, state);
+}
+
+static struct irq_chip s3c2412_irq_rtc_chip;
+
static int s3c2412_irq_add(struct sys_device *sysdev)
{
unsigned int irqno;
@@ -173,6 +190,13 @@ static int s3c2412_irq_add(struct sys_device *sysdev)
set_irq_flags(irqno, IRQF_VALID);
}
+ /* change RTC IRQ's set wake method */
+
+ s3c2412_irq_rtc_chip = s3c_irq_chip;
+ s3c2412_irq_rtc_chip.set_wake = s3c2412_irq_rtc_wake;
+
+ set_irq_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
+
return 0;
}
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index 8988dac388a..d4ffb2d9807 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -33,6 +33,8 @@
#include <asm/plat-s3c24xx/s3c2412.h>
+extern void s3c2412_sleep_enter(void);
+
static void s3c2412_cpu_suspend(void)
{
unsigned long tmp;
@@ -43,20 +45,7 @@ static void s3c2412_cpu_suspend(void)
tmp |= S3C2412_PWRCFG_STANDBYWFI_SLEEP;
__raw_writel(tmp, S3C2412_PWRCFG);
- /* issue the standby signal into the pm unit. Note, we
- * issue a write-buffer drain just in case */
-
- tmp = 0;
-
- asm("b 1f\n\t"
- ".align 5\n\t"
- "1:\n\t"
- "mcr p15, 0, %0, c7, c10, 4\n\t"
- "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
-
- /* we should never get past here */
-
- panic("sleep resumed to originator?");
+ s3c2412_sleep_enter();
}
static void s3c2412_pm_prepare(void)
@@ -88,7 +77,6 @@ static struct sleep_save s3c2412_sleep[] = {
SAVE_ITEM(S3C2412_GPBSLPCON),
SAVE_ITEM(S3C2412_GPCSLPCON),
SAVE_ITEM(S3C2412_GPDSLPCON),
- SAVE_ITEM(S3C2412_GPESLPCON),
SAVE_ITEM(S3C2412_GPFSLPCON),
SAVE_ITEM(S3C2412_GPGSLPCON),
SAVE_ITEM(S3C2412_GPHSLPCON),
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 265cd3f567a..abf1599c9f9 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -168,6 +168,8 @@ void __init s3c2412_init_clocks(int xtal)
fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2);
+ clk_mpll.rate = fclk;
+
tmp = __raw_readl(S3C2410_CLKDIVN);
/* work out clock scalings */
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
new file mode 100644
index 00000000000..db32cac4199
--- /dev/null
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s3c2412/sleep.S
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 Power Manager low-level sleep support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-irq.h>
+
+ .text
+
+ .global s3c2412_sleep_enter
+
+s3c2412_sleep_enter:
+ mov r0, #0 /* argument for coprocessors */
+ ldr r1, =S3C2410_INTPND
+ ldr r2, =S3C2410_SRCPND
+ ldr r3, =S3C2410_EINTPEND
+
+ teq r0, r0
+ bl s3c2412_sleep_enter1
+ teq pc, r0
+ bl s3c2412_sleep_enter1
+
+ .align 5
+
+ /* this is called twice, first with the Z flag to ensure that the
+ * instructions have been loaded into the cache, and the second
+ * time to try and suspend the system.
+ */
+s3c2412_sleep_enter1:
+ mcr p15, 0, r0, c7, c10, 4
+ mcrne p15, 0, r0, c7, c0, 4
+
+ /* if we return from here, it is because an interrupt was
+ * active when we tried to shutdown. Try and ack the IRQ and
+ * retry, as simply returning causes the system to lock.
+ */
+
+ ldrne r9, [ r1 ]
+ strne r9, [ r1 ]
+ ldrne r9, [ r2 ]
+ strne r9, [ r2 ]
+ ldrne r9, [ r3 ]
+ strne r9, [ r3 ]
+ bne s3c2412_sleep_enter1
+
+ mov pc, r14
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 79e2ea4adaf..184d804934c 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -111,14 +111,9 @@ static struct clk s3c2440_clk_ac97 = {
static int s3c2440_clk_add(struct sys_device *sysdev)
{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
+ struct clk *clock_upll;
struct clk *clock_h;
struct clk *clock_p;
- struct clk *clock_upll;
-
- printk("S3C2440: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clock_p = clk_get(NULL, "pclk");
clock_h = clk_get(NULL, "hclk");
@@ -129,21 +124,6 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
return -EINVAL;
}
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- mutex_lock(&clocks_mutex);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- mutex_unlock(&clocks_mutex);
- }
-
s3c2440_clk_cam.parent = clock_h;
s3c2440_clk_ac97.parent = clock_p;
s3c2440_clk_cam_upll.parent = clock_upll;
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 5b9e830ac4d..2d030d439fe 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -115,14 +115,9 @@ static struct clk s3c2442_clk_cam_upll = {
static int s3c2442_clk_add(struct sys_device *sysdev)
{
- unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
- unsigned long clkdivn;
+ struct clk *clock_upll;
struct clk *clock_h;
struct clk *clock_p;
- struct clk *clock_upll;
-
- printk("S3C2442: Clock Support, DVS %s\n",
- (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
clock_p = clk_get(NULL, "pclk");
clock_h = clk_get(NULL, "hclk");
@@ -133,21 +128,6 @@ static int s3c2442_clk_add(struct sys_device *sysdev)
return -EINVAL;
}
- /* check rate of UPLL, and if it is near 96MHz, then change
- * to using half the UPLL rate for the system */
-
- if (clk_get_rate(clock_upll) > (94 * MHZ)) {
- clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
- mutex_lock(&clocks_mutex);
-
- clkdivn = __raw_readl(S3C2410_CLKDIVN);
- clkdivn |= S3C2440_CLKDIVN_UCLK;
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
-
- mutex_unlock(&clocks_mutex);
- }
-
s3c2442_clk_cam.parent = clock_h;
s3c2442_clk_cam_upll.parent = clock_upll;
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 59703c6fb29..06206ceb312 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -29,9 +29,8 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id)
{
unsigned int status = Ser4SSSR;
- if (status & SSSR_ROR) {
+ if (status & SSSR_ROR)
printk(KERN_WARNING "SSP: receiver overrun\n");
- }
Ser4SSSR = SSSR_ROR;
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 47f8640438e..c2677368d6a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -14,6 +14,7 @@
#include <linux/irq.h>
#include <linux/timex.h>
#include <linux/signal.h>
+#include <linux/clocksource.h>
#include <asm/mach/time.h>
#include <asm/hardware.h>
@@ -35,23 +36,6 @@ static int sa1100_set_rtc(void)
return 0;
}
-/* IRQs are disabled before entering here from do_gettimeofday() */
-static unsigned long sa1100_gettimeoffset (void)
-{
- unsigned long ticks_to_match, elapsed, usec;
-
- /* Get ticks before next timer match */
- ticks_to_match = OSMR0 - OSCR;
-
- /* We need elapsed ticks since last match */
- elapsed = LATCH - ticks_to_match;
-
- /* Now convert them to usec */
- usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
-
- return usec;
-}
-
#ifdef CONFIG_NO_IDLE_HZ
static unsigned long initial_match;
static int match_posponed;
@@ -92,6 +76,20 @@ static struct irqaction sa1100_timer_irq = {
.handler = sa1100_timer_interrupt,
};
+static cycle_t sa1100_read_oscr(void)
+{
+ return OSCR;
+}
+
+static struct clocksource cksrc_sa1100_oscr = {
+ .name = "oscr",
+ .rating = 200,
+ .read = sa1100_read_oscr,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 20,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
static void __init sa1100_timer_init(void)
{
unsigned long flags;
@@ -105,6 +103,11 @@ static void __init sa1100_timer_init(void)
OIER = OIER_E0; /* enable match on timer 0 to cause interrupts */
OSMR0 = OSCR + LATCH; /* set initial match */
local_irq_restore(flags);
+
+ cksrc_sa1100_oscr.mult =
+ clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift);
+
+ clocksource_register(&cksrc_sa1100_oscr);
}
#ifdef CONFIG_NO_IDLE_HZ
@@ -178,7 +181,6 @@ struct sys_timer sa1100_timer = {
.init = sa1100_timer_init,
.suspend = sa1100_timer_suspend,
.resume = sa1100_timer_resume,
- .offset = sa1100_gettimeoffset,
#ifdef CONFIG_NO_IDLE_HZ
.dyn_tick = &sa1100_dyn_tick,
#endif
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 7868f4dc1d0..cb104c2a732 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@ config CPU_ARM925T
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX || ARCH_DAVINCI
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
@@ -345,8 +345,9 @@ config CPU_XSC3
# ARMv6
config CPU_V6
bool "Support ARM V6 processor"
- depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3
+ depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A
default y if ARCH_MX3
+ default y if ARCH_MSM7X00A
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index a8a7dab757e..28ad7ab1c0c 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -12,6 +12,7 @@
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/kprobes.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@@ -20,6 +21,29 @@
#include "fault.h"
+
+#ifdef CONFIG_KPROBES
+static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
+{
+ int ret = 0;
+
+ if (!user_mode(regs)) {
+ /* kprobe_running() needs smp_processor_id() */
+ preempt_disable();
+ if (kprobe_running() && kprobe_fault_handler(regs, fsr))
+ ret = 1;
+ preempt_enable();
+ }
+
+ return ret;
+}
+#else
+static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
+{
+ return 0;
+}
+#endif
+
/*
* This is useful to dump out the page tables associated with
* 'addr' in mm 'mm'.
@@ -215,13 +239,16 @@ out:
return fault;
}
-static int
+static int __kprobes
do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
struct task_struct *tsk;
struct mm_struct *mm;
int fault, sig, code;
+ if (notify_page_fault(regs, fsr))
+ return 0;
+
tsk = current;
mm = tsk->mm;
@@ -311,7 +338,7 @@ no_context:
* interrupt or a critical region, and should only copy the information
* from the master page table, nothing more.
*/
-static int
+static int __kprobes
do_translation_fault(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 0360b1f14d1..45a77df668f 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -212,7 +212,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
static irqreturn_t mbox_interrupt(int irq, void *p)
{
- struct omap_mbox *mbox = (struct omap_mbox *)p;
+ struct omap_mbox *mbox = p;
if (is_mbox_irq(mbox, IRQ_TX))
__mbox_tx_interrupt(mbox);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index f7b9ccdaacb..2af5bd5a134 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -98,9 +98,10 @@ static void omap_mcbsp_dump_reg(u8 id)
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
- struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id);
+ struct omap_mcbsp *mcbsp_tx = dev_id;
- DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ DBG("TX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
complete(&mcbsp_tx->tx_irq_completion);
return IRQ_HANDLED;
@@ -108,9 +109,10 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
- struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id);
+ struct omap_mcbsp *mcbsp_rx = dev_id;
- DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ DBG("RX IRQ callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
complete(&mcbsp_rx->rx_irq_completion);
return IRQ_HANDLED;
@@ -118,9 +120,10 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
{
- struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data);
+ struct omap_mcbsp *mcbsp_dma_tx = data;
- DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
+ DBG("TX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_tx->dma_tx_lch);
@@ -131,9 +134,10 @@ static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data)
static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data)
{
- struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data);
+ struct omap_mcbsp *mcbsp_dma_rx = data;
- DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
+ DBG("RX DMA callback : 0x%x\n",
+ OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2));
/* We can free the channels */
omap_free_dma(mcbsp_dma_rx->dma_rx_lch);
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 8e5ccaa1f03..131d20237dd 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -23,6 +23,7 @@ obj-y += clock.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 79cda0faec8..99a44746f8f 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -172,6 +172,15 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
if (IS_ERR(clk))
return -EINVAL;
+ /* We do not default just do a clk->rate = rate as
+ * the clock may have been made this way by choice.
+ */
+
+ WARN_ON(clk->set_rate == NULL);
+
+ if (clk->set_rate == NULL)
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
ret = (clk->set_rate)(clk, rate);
mutex_unlock(&clocks_mutex);
@@ -213,6 +222,12 @@ EXPORT_SYMBOL(clk_set_parent);
/* base clocks */
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+
struct clk clk_xtal = {
.name = "xtal",
.id = -1,
@@ -224,6 +239,7 @@ struct clk clk_xtal = {
struct clk clk_mpll = {
.name = "mpll",
.id = -1,
+ .set_rate = clk_default_setrate,
};
struct clk clk_upll = {
@@ -239,6 +255,7 @@ struct clk clk_f = {
.rate = 0,
.parent = &clk_mpll,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_h = {
@@ -247,6 +264,7 @@ struct clk clk_h = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_p = {
@@ -255,6 +273,7 @@ struct clk clk_p = {
.rate = 0,
.parent = NULL,
.ctrlbit = 0,
+ .set_rate = clk_default_setrate,
};
struct clk clk_usb_bus = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index aae1b9cbaf4..ac9ff1666fc 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -525,7 +525,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
}
} else if (chan->state == S3C2410_DMA_IDLE) {
if (chan->flags & S3C2410_DMAF_AUTOSTART) {
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
+ s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+ S3C2410_DMAOP_START);
}
}
@@ -787,7 +788,7 @@ int s3c2410_dma_request(unsigned int channel,
pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
- return 0;
+ return chan->number | DMACH_LOW_LEVEL;
}
EXPORT_SYMBOL(s3c2410_dma_request);
@@ -1173,6 +1174,7 @@ int s3c2410_dma_devconfig(int channel,
chan->source = source;
chan->dev_addr = devaddr;
+ chan->hw_cfg = hwcfg;
switch (source) {
case S3C2410_DMASRC_HW:
@@ -1184,7 +1186,7 @@ int s3c2410_dma_devconfig(int channel,
dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
- return 0;
+ break;
case S3C2410_DMASRC_MEM:
/* source is memory */
@@ -1195,11 +1197,19 @@ int s3c2410_dma_devconfig(int channel,
dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
- return 0;
+ break;
+
+ default:
+ printk(KERN_ERR "dma%d: invalid source type (%d)\n",
+ channel, source);
+
+ return -EINVAL;
}
- printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
- return -EINVAL;
+ if (dma_sel.direction != NULL)
+ (dma_sel.direction)(chan, chan->map, source);
+
+ return 0;
}
EXPORT_SYMBOL(s3c2410_dma_devconfig);
@@ -1227,6 +1237,10 @@ int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
EXPORT_SYMBOL(s3c2410_dma_getposition);
+static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+{
+ return container_of(dev, struct s3c2410_dma_chan, dev);
+}
/* system device class */
@@ -1234,7 +1248,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
{
- struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
+ struct s3c2410_dma_chan *cp = to_dma_chan(dev);
printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
@@ -1256,6 +1270,24 @@ static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
static int s3c2410_dma_resume(struct sys_device *dev)
{
+ struct s3c2410_dma_chan *cp = to_dma_chan(dev);
+ unsigned int no = cp->number | DMACH_LOW_LEVEL;
+
+ /* restore channel's hardware configuration */
+
+ if (!cp->in_use)
+ return 0;
+
+ printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
+
+ s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
+ s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+
+ /* re-select the dma source for this channel */
+
+ if (cp->map != NULL)
+ dma_sel.select(cp, cp->map);
+
return 0;
}
@@ -1445,6 +1477,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
found:
dmach = &s3c2410_chans[ch];
+ dmach->map = ch_map;
dma_chan_map[channel] = dmach;
/* select the channel */
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ec3a09c4d18..ee99dcc7f0b 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -122,6 +122,19 @@ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
EXPORT_SYMBOL(s3c2410_gpio_pullup);
+int s3c2410_gpio_getpull(unsigned int pin)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return -EINVAL;
+
+ return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getpull);
+
void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
{
void __iomem *base = S3C24XX_GPIO_BASE(pin);
@@ -186,3 +199,19 @@ int s3c2410_gpio_getirq(unsigned int pin)
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
+
+int s3c2410_gpio_irq2pin(unsigned int irq)
+{
+ if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
+ return S3C2410_GPF0 + (irq - IRQ_EINT0);
+
+ if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
+ return S3C2410_GPF4 + (irq - IRQ_EINT4);
+
+ if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
+ return S3C2410_GPG0 + (irq - IRQ_EINT8);
+
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 8fbc8847026..d486f511256 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -187,7 +187,7 @@ struct irq_chip s3c_irq_level_chip = {
.set_wake = s3c_irq_wake
};
-static struct irq_chip s3c_irq_chip = {
+struct irq_chip s3c_irq_chip = {
.name = "s3c",
.ack = s3c_irq_ack,
.mask = s3c_irq_mask,
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 4fdb3117744..bf5581a9aee 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -83,38 +83,39 @@ static struct sleep_save core_save[] = {
SAVE_ITEM(S3C2410_REFRESH),
};
-static struct sleep_save gpio_save[] = {
- SAVE_ITEM(S3C2410_GPACON),
- SAVE_ITEM(S3C2410_GPADAT),
-
- SAVE_ITEM(S3C2410_GPBCON),
- SAVE_ITEM(S3C2410_GPBDAT),
- SAVE_ITEM(S3C2410_GPBUP),
-
- SAVE_ITEM(S3C2410_GPCCON),
- SAVE_ITEM(S3C2410_GPCDAT),
- SAVE_ITEM(S3C2410_GPCUP),
-
- SAVE_ITEM(S3C2410_GPDCON),
- SAVE_ITEM(S3C2410_GPDDAT),
- SAVE_ITEM(S3C2410_GPDUP),
-
- SAVE_ITEM(S3C2410_GPECON),
- SAVE_ITEM(S3C2410_GPEDAT),
- SAVE_ITEM(S3C2410_GPEUP),
-
- SAVE_ITEM(S3C2410_GPFCON),
- SAVE_ITEM(S3C2410_GPFDAT),
- SAVE_ITEM(S3C2410_GPFUP),
-
- SAVE_ITEM(S3C2410_GPGCON),
- SAVE_ITEM(S3C2410_GPGDAT),
- SAVE_ITEM(S3C2410_GPGUP),
-
- SAVE_ITEM(S3C2410_GPHCON),
- SAVE_ITEM(S3C2410_GPHDAT),
- SAVE_ITEM(S3C2410_GPHUP),
+static struct gpio_sleep {
+ void __iomem *base;
+ unsigned int gpcon;
+ unsigned int gpdat;
+ unsigned int gpup;
+} gpio_save[] = {
+ [0] = {
+ .base = S3C2410_GPACON,
+ },
+ [1] = {
+ .base = S3C2410_GPBCON,
+ },
+ [2] = {
+ .base = S3C2410_GPCCON,
+ },
+ [3] = {
+ .base = S3C2410_GPDCON,
+ },
+ [4] = {
+ .base = S3C2410_GPECON,
+ },
+ [5] = {
+ .base = S3C2410_GPFCON,
+ },
+ [6] = {
+ .base = S3C2410_GPGCON,
+ },
+ [7] = {
+ .base = S3C2410_GPHCON,
+ },
+};
+static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
@@ -486,6 +487,184 @@ static void s3c2410_pm_configure_extint(void)
}
}
+/* offsets for CON/DAT/UP registers */
+
+#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
+#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
+#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
+
+/* s3c2410_pm_save_gpios()
+ *
+ * Save the state of the GPIOs
+ */
+
+static void s3c2410_pm_save_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ unsigned int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ void __iomem *base = gps->base;
+
+ gps->gpcon = __raw_readl(base + OFFS_CON);
+ gps->gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (gpio > 0)
+ gps->gpup = __raw_readl(base + OFFS_UP);
+
+ }
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+ return (con == 2 || con == 3);
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+ return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+ return con == 1;
+}
+
+/* s3c2410_pm_restore_gpio()
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT } Change DAT first
+ * { IN => SFN } Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN } Change CON first, so new data will not glitch
+ * { SFN => IN } Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ * state for when it is next output.
+ */
+
+static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
+{
+ void __iomem *base = gps->base;
+ unsigned long gps_gpcon = gps->gpcon;
+ unsigned long gps_gpdat = gps->gpdat;
+ unsigned long old_gpcon;
+ unsigned long old_gpdat;
+ unsigned long old_gpup = 0x0;
+ unsigned long gpcon;
+ int nr;
+
+ old_gpcon = __raw_readl(base + OFFS_CON);
+ old_gpdat = __raw_readl(base + OFFS_DAT);
+
+ if (base == S3C2410_GPACON) {
+ /* GPACON only has one bit per control / data and no PULLUPs.
+ * GPACON[x] = 0 => Output, 1 => SFN */
+
+ /* first set all SFN bits to SFN */
+
+ gpcon = old_gpcon | gps->gpcon;
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* now set all the other bits */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ } else {
+ unsigned long old, new, mask;
+ unsigned long change_mask = 0x0;
+
+ old_gpup = __raw_readl(base + OFFS_UP);
+
+ /* Create a change_mask of all the items that need to have
+ * their CON value changed before their DAT value, so that
+ * we minimise the work between the two settings.
+ */
+
+ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+ /* Write the new CON settings */
+
+ gpcon = old_gpcon & ~change_mask;
+ gpcon |= gps_gpcon & change_mask;
+
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* Now change any items that require DAT,CON */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+ __raw_writel(gps->gpup, base + OFFS_UP);
+ }
+
+ DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
+ index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+
+/** s3c2410_pm_restore_gpios()
+ *
+ * Restore the state of the GPIOs
+ */
+
+static void s3c2410_pm_restore_gpios(void)
+{
+ struct gpio_sleep *gps = gpio_save;
+ int gpio;
+
+ for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
+ s3c2410_pm_restore_gpio(gpio, gps);
+ }
+}
+
void (*pm_cpu_prep)(void);
void (*pm_cpu_sleep)(void);
@@ -535,7 +714,8 @@ static int s3c2410_pm_enter(suspend_state_t state)
/* save all necessary core registers not covered by the drivers */
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_save_gpios();
+ s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
@@ -585,8 +765,9 @@ static int s3c2410_pm_enter(suspend_state_t state)
/* restore the system state */
s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+ s3c2410_pm_restore_gpios();
s3c2410_pm_debug_init();
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
new file mode 100644
index 00000000000..faf3e0f9f4e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -0,0 +1,137 @@
+/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
+ *
+ * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 Common clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long camdivn;
+ unsigned long dvs;
+
+ if (parent == &clk_f)
+ dvs = 0;
+ else if (parent == &clk_h)
+ dvs = S3C2440_CAMDIVN_DVSEN;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ camdivn = __raw_readl(S3C2440_CAMDIVN);
+ camdivn &= ~S3C2440_CAMDIVN_DVSEN;
+ camdivn |= dvs;
+ __raw_writel(camdivn, S3C2440_CAMDIVN);
+
+ return 0;
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .set_parent = s3c2440_setparent_armclk,
+};
+
+static int s3c244x_clk_add(struct sys_device *sysdev)
+{
+ unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
+ unsigned long clkdivn;
+ struct clk *clock_upll;
+ int ret;
+
+ printk("S3C244X: Clock Support, DVS %s\n",
+ (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
+
+ clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
+
+ ret = s3c24xx_register_clock(&clk_arm);
+ if (ret < 0) {
+ printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
+ return ret;
+ }
+
+ clock_upll = clk_get(NULL, "upll");
+ if (IS_ERR(clock_upll)) {
+ printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
+ return -ENOENT;
+ }
+
+ /* check rate of UPLL, and if it is near 96MHz, then change
+ * to using half the UPLL rate for the system */
+
+ if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+ clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
+
+ mutex_lock(&clocks_mutex);
+
+ clkdivn = __raw_readl(S3C2410_CLKDIVN);
+ clkdivn |= S3C2440_CLKDIVN_UCLK;
+ __raw_writel(clkdivn, S3C2410_CLKDIVN);
+
+ mutex_unlock(&clocks_mutex);
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+ .add = s3c244x_clk_add,
+};
+
+static int s3c2440_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c2440_clk_init);
+
+static struct sysdev_driver s3c2442_clk_driver = {
+ .add = s3c244x_clk_add,
+};
+
+static int s3c2442_clk_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_clk_driver);
+}
+
+arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0a9a5e7f62e..7ed58c0c24c 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Fri May 11 19:53:41 2007
+# Last update: Sat Jan 26 14:45:34 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -266,7 +266,7 @@ stork_egg ARCH_STORK_EGG STORK_EGG 248
wismo SA1100_WISMO WISMO 249
ezlinx ARCH_EZLINX EZLINX 250
at91rm9200 ARCH_AT91RM9200 AT91RM9200 251
-orion ARCH_ORION ORION 252
+adtech_orion ARCH_ADTECH_ORION ADTECH_ORION 252
neptune ARCH_NEPTUNE NEPTUNE 253
hackkit SA1100_HACKKIT HACKKIT 254
pxa_wins30 ARCH_PXA_WINS30 PXA_WINS30 255
@@ -661,7 +661,6 @@ a9200ec MACH_A9200EC A9200EC 645
pnx0105 MACH_PNX0105 PNX0105 646
adcpoecpu MACH_ADCPOECPU ADCPOECPU 647
csb637 MACH_CSB637 CSB637 648
-ml69q6203 MACH_ML69Q6203 ML69Q6203 649
mb9200 MACH_MB9200 MB9200 650
kulun MACH_KULUN KULUN 651
snapper MACH_SNAPPER SNAPPER 652
@@ -953,7 +952,6 @@ fred_jack MACH_FRED_JACK FRED_JACK 939
ttg_color1 MACH_TTG_COLOR1 TTG_COLOR1 940
nxeb500hmi MACH_NXEB500HMI NXEB500HMI 941
netdcu8 MACH_NETDCU8 NETDCU8 942
-ml675050_cpu_boa MACH_ML675050_CPU_BOA ML675050_CPU_BOA 943
ng_fvx538 MACH_NG_FVX538 NG_FVX538 944
ng_fvs338 MACH_NG_FVS338 NG_FVS338 945
pnx4103 MACH_PNX4103 PNX4103 946
@@ -1148,7 +1146,7 @@ aidx270 MACH_AIDX270 AIDX270 1134
rema MACH_REMA REMA 1135
bps1000 MACH_BPS1000 BPS1000 1136
hw90350 MACH_HW90350 HW90350 1137
-omap_sdp3430 MACH_OMAP_SDP3430 OMAP_SDP3430 1138
+omap_3430sdp MACH_OMAP_3430SDP OMAP_3430SDP 1138
bluetouch MACH_BLUETOUCH BLUETOUCH 1139
vstms MACH_VSTMS VSTMS 1140
xsbase270 MACH_XSBASE270 XSBASE270 1141
@@ -1214,7 +1212,7 @@ osstbox MACH_OSSTBOX OSSTBOX 1203
kbat9261 MACH_KBAT9261 KBAT9261 1204
ct1100 MACH_CT1100 CT1100 1205
akcppxa MACH_AKCPPXA AKCPPXA 1206
-zevio_1020 MACH_ZEVIO_1020 ZEVIO_1020 1207
+ochaya1020 MACH_OCHAYA1020 OCHAYA1020 1207
hitrack MACH_HITRACK HITRACK 1208
syme1 MACH_SYME1 SYME1 1209
syhl1 MACH_SYHL1 SYHL1 1210
@@ -1299,7 +1297,7 @@ xp179 MACH_XP179 XP179 1290
h4300 MACH_H4300 H4300 1291
goramo_mlr MACH_GORAMO_MLR GORAMO_MLR 1292
mxc30020evb MACH_MXC30020EVB MXC30020EVB 1293
-adsbitsymx MACH_ADSBITSIMX ADSBITSIMX 1294
+adsbitsyg5 MACH_ADSBITSYG5 ADSBITSYG5 1294
adsportalplus MACH_ADSPORTALPLUS ADSPORTALPLUS 1295
mmsp2plus MACH_MMSP2PLUS MMSP2PLUS 1296
em_x270 MACH_EM_X270 EM_X270 1297
@@ -1367,3 +1365,249 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358
csb726 MACH_CSB726 CSB726 1359
tik27 MACH_TIK27 TIK27 1360
mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
+rirm3 MACH_RIRM3 RIRM3 1362
+pelco_odyssey MACH_PELCO_ODYSSEY PELCO_ODYSSEY 1363
+adx_abox MACH_ADX_ABOX ADX_ABOX 1365
+adx_tpid MACH_ADX_TPID ADX_TPID 1366
+minicheck MACH_MINICHECK MINICHECK 1367
+idam MACH_IDAM IDAM 1368
+mario_mx MACH_MARIO_MX MARIO_MX 1369
+vi1888 MACH_VI1888 VI1888 1370
+zr4230 MACH_ZR4230 ZR4230 1371
+t1_ix_blue MACH_T1_IX_BLUE T1_IX_BLUE 1372
+syhq2 MACH_SYHQ2 SYHQ2 1373
+computime_r3 MACH_COMPUTIME_R3 COMPUTIME_R3 1374
+oratis MACH_ORATIS ORATIS 1375
+mikko MACH_MIKKO MIKKO 1376
+holon MACH_HOLON HOLON 1377
+olip8 MACH_OLIP8 OLIP8 1378
+ghi270hg MACH_GHI270HG GHI270HG 1379
+davinci_dm6467_evm MACH_DAVINCI_DM6467_EVM DAVINCI_DM6467_EVM 1380
+davinci_dm355_evm MACH_DAVINCI_DM350_EVM DAVINCI_DM350_EVM 1381
+blackriver MACH_BLACKRIVER BLACKRIVER 1383
+sandgate_wp MACH_SANDGATEWP SANDGATEWP 1384
+cdotbwsg MACH_CDOTBWSG CDOTBWSG 1385
+quark963 MACH_QUARK963 QUARK963 1386
+csb735 MACH_CSB735 CSB735 1387
+littleton MACH_LITTLETON LITTLETON 1388
+mio_p550 MACH_MIO_P550 MIO_P550 1389
+motion2440 MACH_MOTION2440 MOTION2440 1390
+imm500 MACH_IMM500 IMM500 1391
+homematic MACH_HOMEMATIC HOMEMATIC 1392
+ermine MACH_ERMINE ERMINE 1393
+kb9202b MACH_KB9202B KB9202B 1394
+hs1xx MACH_HS1XX HS1XX 1395
+studentmate2440 MACH_STUDENTMATE2440 STUDENTMATE2440 1396
+arvoo_l1_z1 MACH_ARVOO_L1_Z1 ARVOO_L1_Z1 1397
+dep2410k MACH_DEP2410K DEP2410K 1398
+xxsvideo MACH_XXSVIDEO XXSVIDEO 1399
+im4004 MACH_IM4004 IM4004 1400
+ochaya1050 MACH_OCHAYA1050 OCHAYA1050 1401
+lep9261 MACH_LEP9261 LEP9261 1402
+svenmeb MACH_SVENMEB SVENMEB 1403
+fortunet2ne MACH_FORTUNET2NE FORTUNET2NE 1404
+nxhx MACH_NXHX NXHX 1406
+realview_pb11mp MACH_REALVIEW_PB11MP REALVIEW_PB11MP 1407
+ids500 MACH_IDS500 IDS500 1408
+ors_n725 MACH_ORS_N725 ORS_N725 1409
+hsdarm MACH_HSDARM HSDARM 1410
+sha_pon003 MACH_SHA_PON003 SHA_PON003 1411
+sha_pon004 MACH_SHA_PON004 SHA_PON004 1412
+sha_pon007 MACH_SHA_PON007 SHA_PON007 1413
+sha_pon011 MACH_SHA_PON011 SHA_PON011 1414
+h6042 MACH_H6042 H6042 1415
+h6043 MACH_H6043 H6043 1416
+looxc550 MACH_LOOXC550 LOOXC550 1417
+cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
+app3xx MACH_APP3XX APP3XX 1419
+sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
+xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421
+xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422
+xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423
+xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424
+ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
+sarge MACH_SARGE SARGE 1426
+a696 MACH_A696 A696 1427
+turtle1916 MACH_TURTLE TURTLE 1428
+mx27_3ds MACH_MX27_3DS MX27_3DS 1430
+bishop MACH_BISHOP BISHOP 1431
+pxx MACH_PXX PXX 1432
+redwood MACH_REDWOOD REDWOOD 1433
+omap_2430dlp MACH_OMAP_2430DLP OMAP_2430DLP 1436
+omap_2430osk MACH_OMAP_2430OSK OMAP_2430OSK 1437
+sardine MACH_SARDINE SARDINE 1438
+halibut MACH_HALIBUT HALIBUT 1439
+trout MACH_TROUT TROUT 1440
+goldfish MACH_GOLDFISH GOLDFISH 1441
+gesbc2440 MACH_GESBC2440 GESBC2440 1442
+nomad MACH_NOMAD NOMAD 1443
+rosalind MACH_ROSALIND ROSALIND 1444
+cc9p9215 MACH_CC9P9215 CC9P9215 1445
+cc9p9210 MACH_CC9P9210 CC9P9210 1446
+cc9p9215js MACH_CC9P9215JS CC9P9215JS 1447
+cc9p9210js MACH_CC9P9210JS CC9P9210JS 1448
+nasffe MACH_NASFFE NASFFE 1449
+tn2x0bd MACH_TN2X0BD TN2X0BD 1450
+gwmpxa MACH_GWMPXA GWMPXA 1451
+exyplus MACH_EXYPLUS EXYPLUS 1452
+jadoo21 MACH_JADOO21 JADOO21 1453
+looxn560 MACH_LOOXN560 LOOXN560 1454
+bonsai MACH_BONSAI BONSAI 1455
+adsmilgato MACH_ADSMILGATO ADSMILGATO 1456
+gba MACH_GBA GBA 1457
+h6044 MACH_H6044 H6044 1458
+app MACH_APP APP 1459
+tct_hammer MACH_TCT_HAMMER TCT_HAMMER 1460
+herald MACH_HERMES HERMES 1461
+artemis MACH_ARTEMIS ARTEMIS 1462
+htctitan MACH_HTCTITAN HTCTITAN 1463
+qranium MACH_QRANIUM QRANIUM 1464
+adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465
+adx_medinet MACH_ADX_MEDINET ADX_MEDINET 1466
+bboard MACH_BBOARD BBOARD 1467
+cambria MACH_CAMBRIA CAMBRIA 1468
+mt7xxx MACH_MT7XXX MT7XXX 1469
+matrix512 MACH_MATRIX512 MATRIX512 1470
+matrix522 MACH_MATRIX522 MATRIX522 1471
+ipac5010 MACH_IPAC5010 IPAC5010 1472
+sakura MACH_SAKURA SAKURA 1473
+grocx MACH_GROCX GROCX 1474
+pm9263 MACH_PM9263 PM9263 1475
+sim_one MACH_SIM_ONE SIM_ONE 1476
+acq132 MACH_ACQ132 ACQ132 1477
+datr MACH_DATR DATR 1478
+actux1 MACH_ACTUX1 ACTUX1 1479
+actux2 MACH_ACTUX2 ACTUX2 1480
+actux3 MACH_ACTUX3 ACTUX3 1481
+flexit MACH_FLEXIT FLEXIT 1482
+bh2x0bd MACH_BH2X0BD BH2X0BD 1483
+atb2002 MACH_ATB2002 ATB2002 1484
+xenon MACH_XENON XENON 1485
+fm607 MACH_FM607 FM607 1486
+matrix514 MACH_MATRIX514 MATRIX514 1487
+matrix524 MACH_MATRIX524 MATRIX524 1488
+inpod MACH_INPOD INPOD 1489
+jive MACH_JIVE JIVE 1490
+tll_mx21 MACH_TLL_MX21 TLL_MX21 1491
+sbc2800 MACH_SBC2800 SBC2800 1492
+cc7ucamry MACH_CC7UCAMRY CC7UCAMRY 1493
+ubisys_p9_sc15 MACH_UBISYS_P9_SC15 UBISYS_P9_SC15 1494
+ubisys_p9_ssc2d10 MACH_UBISYS_P9_SSC2D10 UBISYS_P9_SSC2D10 1495
+ubisys_p9_rcu3 MACH_UBISYS_P9_RCU3 UBISYS_P9_RCU3 1496
+aml_m8000 MACH_AML_M8000 AML_M8000 1497
+snapper_270 MACH_SNAPPER_270 SNAPPER_270 1498
+omap_bbx MACH_OMAP_BBX OMAP_BBX 1499
+ucn2410 MACH_UCN2410 UCN2410 1500
+sam9_l9260 MACH_SAM9_L9260 SAM9_L9260 1501
+eti_c2 MACH_ETI_C2 ETI_C2 1502
+avalanche MACH_AVALANCHE AVALANCHE 1503
+realview_pb1176 MACH_REALVIEW_PB1176 REALVIEW_PB1176 1504
+dp1500 MACH_DP1500 DP1500 1505
+apple_iphone MACH_APPLE_IPHONE APPLE_IPHONE 1506
+yl9200 MACH_YL9200 YL9200 1507
+rd88f5182 MACH_RD88F5182 RD88F5182 1508
+kurobox_pro MACH_KUROBOX_PRO KUROBOX_PRO 1509
+se_poet MACH_SE_POET SE_POET 1510
+mx31_3ds MACH_MX31_3DS MX31_3DS 1511
+r270 MACH_R270 R270 1512
+armour21 MACH_ARMOUR21 ARMOUR21 1513
+dt2 MACH_DT2 DT2 1514
+vt4 MACH_VT4 VT4 1515
+tyco320 MACH_TYCO320 TYCO320 1516
+adma MACH_ADMA ADMA 1517
+wp188 MACH_WP188 WP188 1518
+corsica MACH_CORSICA CORSICA 1519
+bigeye MACH_BIGEYE BIGEYE 1520
+tll5000 MACH_TLL5000 TLL5000 1522
+hni270 MACH_HNI_X270 HNI_X270 1523
+qong MACH_QONG QONG 1524
+tcompact MACH_TCOMPACT TCOMPACT 1525
+puma5 MACH_PUMA5 PUMA5 1526
+elara MACH_ELARA ELARA 1527
+ellington MACH_ELLINGTON ELLINGTON 1528
+xda_atom MACH_XDA_ATOM XDA_ATOM 1529
+energizer2 MACH_ENERGIZER2 ENERGIZER2 1530
+odin MACH_ODIN ODIN 1531
+actux4 MACH_ACTUX4 ACTUX4 1532
+esl_omap MACH_ESL_OMAP ESL_OMAP 1533
+omap2evm MACH_OMAP2EVM OMAP2EVM 1534
+omap3evm MACH_OMAP3EVM OMAP3EVM 1535
+adx_pcu57 MACH_ADX_PCU57 ADX_PCU57 1536
+monaco MACH_MONACO MONACO 1537
+levante MACH_LEVANTE LEVANTE 1538
+tmxipx425 MACH_TMXIPX425 TMXIPX425 1539
+leep MACH_LEEP LEEP 1540
+raad MACH_RAAD RAAD 1541
+dns323 MACH_DNS323 DNS323 1542
+ap1000 MACH_AP1000 AP1000 1543
+a9sam6432 MACH_A9SAM6432 A9SAM6432 1544
+shiny MACH_SHINY SHINY 1545
+omap3_beagle MACH_OMAP3_BEAGLE OMAP3_BEAGLE 1546
+csr_bdb2 MACH_CSR_BDB2 CSR_BDB2 1547
+nokia_n810 MACH_NOKIA_N810 NOKIA_N810 1548
+c270 MACH_C270 C270 1549
+sentry MACH_SENTRY SENTRY 1550
+pcm038 MACH_PCM038 PCM038 1551
+anc300 MACH_ANC300 ANC300 1552
+htckaiser MACH_HTCKAISER HTCKAISER 1553
+sbat100 MACH_SBAT100 SBAT100 1554
+modunorm MACH_MODUNORM MODUNORM 1555
+pelos_twarm MACH_PELOS_TWARM PELOS_TWARM 1556
+flank MACH_FLANK FLANK 1557
+sirloin MACH_SIRLOIN SIRLOIN 1558
+brisket MACH_BRISKET BRISKET 1559
+chuck MACH_CHUCK CHUCK 1560
+otter MACH_OTTER OTTER 1561
+davinci_ldk MACH_DAVINCI_LDK DAVINCI_LDK 1562
+phreedom MACH_PHREEDOM PHREEDOM 1563
+sg310 MACH_SG310 SG310 1564
+ts_x09 MACH_TS209 TS209 1565
+at91cap9adk MACH_AT91CAP9ADK AT91CAP9ADK 1566
+tion9315 MACH_TION9315 TION9315 1567
+mast MACH_MAST MAST 1568
+pfw MACH_PFW PFW 1569
+yl_p2440 MACH_YL_P2440 YL_P2440 1570
+zsbc32 MACH_ZSBC32 ZSBC32 1571
+omap_pace2 MACH_OMAP_PACE2 OMAP_PACE2 1572
+imx_pace2 MACH_IMX_PACE2 IMX_PACE2 1573
+mx31moboard MACH_MX31MOBOARD MX31MOBOARD 1574
+mx37_3ds MACH_MX37_3DS MX37_3DS 1575
+rcc MACH_RCC RCC 1576
+dmp MACH_ARM9 ARM9 1577
+vision_ep9307 MACH_VISION_EP9307 VISION_EP9307 1578
+scly1000 MACH_SCLY1000 SCLY1000 1579
+fontel_ep MACH_FONTEL_EP FONTEL_EP 1580
+voiceblue3g MACH_VOICEBLUE3G VOICEBLUE3G 1581
+tt9200 MACH_TT9200 TT9200 1582
+digi2410 MACH_DIGI2410 DIGI2410 1583
+terastation_pro2 MACH_TERASTATION_PRO2 TERASTATION_PRO2 1584
+linkstation_pro MACH_LINKSTATION_PRO LINKSTATION_PRO 1585
+motorola_a780 MACH_MOTOROLA_A780 MOTOROLA_A780 1587
+motorola_e6 MACH_MOTOROLA_E6 MOTOROLA_E6 1588
+motorola_e2 MACH_MOTOROLA_E2 MOTOROLA_E2 1589
+motorola_e680 MACH_MOTOROLA_E680 MOTOROLA_E680 1590
+ur2410 MACH_UR2410 UR2410 1591
+tas9261 MACH_TAS9261 TAS9261 1592
+davinci_hermes_hd MACH_HERMES_HD HERMES_HD 1593
+davinci_perseo_hd MACH_PERSEO_HD PERSEO_HD 1594
+stargazer2 MACH_STARGAZER2 STARGAZER2 1595
+e350 MACH_E350 E350 1596
+wpcm450 MACH_WPCM450 WPCM450 1597
+cartesio MACH_CARTESIO CARTESIO 1598
+toybox MACH_TOYBOX TOYBOX 1599
+tx27 MACH_TX27 TX27 1600
+ts409 MACH_TS409 TS409 1601
+p300 MACH_P300 P300 1602
+xdacomet MACH_XDACOMET XDACOMET 1603
+dexflex2 MACH_DEXFLEX2 DEXFLEX2 1604
+ow MACH_OW OW 1605
+armebs3 MACH_ARMEBS3 ARMEBS3 1606
+u3 MACH_U3 U3 1607
+smdk2450 MACH_SMDK2450 SMDK2450 1608
+rsi_ews MACH_RSI_EWS RSI_EWS 1609
+tnb MACH_TNB TNB 1610
+toepath MACH_TOEPATH TOEPATH 1611
+kb9263 MACH_KB9263 KB9263 1612
+mt7108 MACH_MT7108 MT7108 1613
+smtr2440 MACH_SMTR2440 SMTR2440 1614
+manao MACH_MANAO MANAO 1615
diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h
index 791d0238c68..c85860bad58 100644
--- a/arch/arm/vfp/vfp.h
+++ b/arch/arm/vfp/vfp.h
@@ -265,7 +265,11 @@ struct vfp_double {
* which returns (double)0.0. This is useful for the compare with
* zero instructions.
*/
+#ifdef CONFIG_VFPv3
+#define VFP_REG_ZERO 32
+#else
#define VFP_REG_ZERO 16
+#endif
extern u64 vfp_get_double(unsigned int reg);
extern void vfp_put_double(u64 val, unsigned int reg);
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 0ac022f800a..353f9e5c791 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -99,12 +99,12 @@ vfp_support_entry:
DBGSTR1 "save old state %p", r4
cmp r4, #0
beq no_old_VFP_process
+ VFPFSTMIA r4, r5 @ save the working registers
VFPFMRX r5, FPSCR @ current status
- VFPFMRX r6, FPINST @ FPINST (always there, rev0 onwards)
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
- VFPFMRX r8, FPINST2, NE @ FPINST2 if needed - avoids reading
- @ nonexistant reg on rev0
- VFPFSTMIA r4 @ save the working registers
+ tst r1, #FPEXC_EX @ is there additional state to save?
+ VFPFMRX r6, FPINST, NE @ FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ VFPFMRX r8, FPINST2, NE @ FPINST2 if needed (and present)
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
@@ -114,13 +114,13 @@ no_old_VFP_process:
DBGSTR1 "load state %p", r10
str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer
@ Load the saved state back into the VFP
- VFPFLDMIA r10 @ reload the working registers while
+ VFPFLDMIA r10, r5 @ reload the working registers while
@ FPEXC is in a safe state
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to write?
- VFPFMXR FPINST2, r8, NE @ FPINST2 if needed - avoids writing
- @ nonexistant reg on rev0
- VFPFMXR FPINST, r6
+ tst r1, #FPEXC_EX @ is there additional state to restore?
+ VFPFMXR FPINST, r6, NE @ restore FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to write?
+ VFPFMXR FPINST2, r8, NE @ FPINST2 if needed (and present)
VFPFMXR FPSCR, r5 @ restore status
check_for_exception:
@@ -136,10 +136,14 @@ check_for_exception:
look_for_VFP_exceptions:
- tst r1, #FPEXC_EX
+ @ Check for synchronous or asynchronous exception
+ tst r1, #FPEXC_EX | FPEXC_DEX
bne process_exception
+ @ On some implementations of the VFP subarch 1, setting FPSCR.IXE
+ @ causes all the CDP instructions to be bounced synchronously without
+ @ setting the FPEXC.EX bit
VFPFMRX r5, FPSCR
- tst r5, #FPSCR_IXE @ IXE doesn't set FPEXC_EX !
+ tst r5, #FPSCR_IXE
bne process_exception
@ Fall into hand on to next handler - appropriate coproc instr
@@ -150,10 +154,6 @@ look_for_VFP_exceptions:
process_exception:
DBGSTR "bounce"
- sub r2, r2, #4
- str r2, [sp, #S_PC] @ retry the instruction on exit from
- @ the imprecise exception handling in
- @ the support code
mov r2, sp @ nothing stacked - regdump is at TOS
mov lr, r9 @ setup for a return to the user code.
@@ -161,7 +161,7 @@ process_exception:
@ r0 holds the trigger instruction
@ r1 holds the FPEXC value
@ r2 pointer to register dump
- b VFP9_bounce @ we have handled this - the support
+ b VFP_bounce @ we have handled this - the support
@ code will raise an exception if
@ required. If not, the user code will
@ retry the faulted instruction
@@ -174,12 +174,12 @@ vfp_save_state:
@ r0 - save location
@ r1 - FPEXC
DBGSTR1 "save VFP state %p", r0
+ VFPFSTMIA r0, r2 @ save the working registers
VFPFMRX r2, FPSCR @ current status
- VFPFMRX r3, FPINST @ FPINST (always there, rev0 onwards)
- tst r1, #FPEXC_FPV2 @ is there an FPINST2 to read?
- VFPFMRX r12, FPINST2, NE @ FPINST2 if needed - avoids reading
- @ nonexistant reg on rev0
- VFPFSTMIA r0 @ save the working registers
+ tst r1, #FPEXC_EX @ is there additional state to save?
+ VFPFMRX r3, FPINST, NE @ FPINST (only if FPEXC.EX is set)
+ tstne r1, #FPEXC_FP2V @ is there an FPINST2 to read?
+ VFPFMRX r12, FPINST2, NE @ FPINST2 if needed (and present)
stmia r0, {r1, r2, r3, r12} @ save FPEXC, FPSCR, FPINST, FPINST2
mov pc, lr
#endif
@@ -217,8 +217,15 @@ vfp_get_double:
fmrrd r0, r1, d\dr
mov pc, lr
.endr
+#ifdef CONFIG_VFPv3
+ @ d16 - d31 registers
+ .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ mrrc p11, 3, r0, r1, c\dr @ fmrrd r0, r1, d\dr
+ mov pc, lr
+ .endr
+#endif
- @ virtual register 16 for compare with zero
+ @ virtual register 16 (or 32 if VFPv3) for compare with zero
mov r0, #0
mov r1, #0
mov pc, lr
@@ -231,3 +238,10 @@ vfp_put_double:
fmdrr d\dr, r0, r1
mov pc, lr
.endr
+#ifdef CONFIG_VFPv3
+ @ d16 - d31 registers
+ .irp dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+ mcrr p11, 3, r1, r2, c\dr @ fmdrr r1, r2, d\dr
+ mov pc, lr
+ .endr
+#endif
diff --git a/arch/arm/vfp/vfpinstr.h b/arch/arm/vfp/vfpinstr.h
index 7f343a4beca..15b95b5ab97 100644
--- a/arch/arm/vfp/vfpinstr.h
+++ b/arch/arm/vfp/vfpinstr.h
@@ -52,11 +52,11 @@
#define FEXT_TO_IDX(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
#define vfp_get_sd(inst) ((inst & 0x0000f000) >> 11 | (inst & (1 << 22)) >> 22)
-#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12)
+#define vfp_get_dd(inst) ((inst & 0x0000f000) >> 12 | (inst & (1 << 22)) >> 18)
#define vfp_get_sm(inst) ((inst & 0x0000000f) << 1 | (inst & (1 << 5)) >> 5)
-#define vfp_get_dm(inst) ((inst & 0x0000000f))
+#define vfp_get_dm(inst) ((inst & 0x0000000f) | (inst & (1 << 5)) >> 1)
#define vfp_get_sn(inst) ((inst & 0x000f0000) >> 15 | (inst & (1 << 7)) >> 7)
-#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16)
+#define vfp_get_dn(inst) ((inst & 0x000f0000) >> 16 | (inst & (1 << 7)) >> 3)
#define vfp_single(inst) (((inst) & 0x0000f00) == 0xa00)
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index b4e210df92f..32455c633f1 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -125,13 +125,13 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
send_sig_info(SIGFPE, &info, current);
}
-static void vfp_panic(char *reason)
+static void vfp_panic(char *reason, u32 inst)
{
int i;
printk(KERN_ERR "VFP: Error: %s\n", reason);
printk(KERN_ERR "VFP: EXC 0x%08x SCR 0x%08x INST 0x%08x\n",
- fmrx(FPEXC), fmrx(FPSCR), fmrx(FPINST));
+ fmrx(FPEXC), fmrx(FPSCR), inst);
for (i = 0; i < 32; i += 2)
printk(KERN_ERR "VFP: s%2u: 0x%08x s%2u: 0x%08x\n",
i, vfp_get_float(i), i+1, vfp_get_float(i+1));
@@ -147,19 +147,16 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
pr_debug("VFP: raising exceptions %08x\n", exceptions);
if (exceptions == VFP_EXCEPTION_ERROR) {
- vfp_panic("unhandled bounce");
+ vfp_panic("unhandled bounce", inst);
vfp_raise_sigfpe(0, regs);
return;
}
/*
- * If any of the status flags are set, update the FPSCR.
+ * Update the FPSCR with the additional exception flags.
* Comparison instructions always return at least one of
* these flags set.
*/
- if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
- fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
-
fpscr |= exceptions;
fmxr(FPSCR, fpscr);
@@ -220,35 +217,64 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
/*
* Package up a bounce condition.
*/
-void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
+void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
{
- u32 fpscr, orig_fpscr, exceptions, inst;
+ u32 fpscr, orig_fpscr, fpsid, exceptions;
pr_debug("VFP: bounce: trigger %08x fpexc %08x\n", trigger, fpexc);
/*
- * Enable access to the VFP so we can handle the bounce.
+ * At this point, FPEXC can have the following configuration:
+ *
+ * EX DEX IXE
+ * 0 1 x - synchronous exception
+ * 1 x 0 - asynchronous exception
+ * 1 x 1 - sychronous on VFP subarch 1 and asynchronous on later
+ * 0 0 1 - synchronous on VFP9 (non-standard subarch 1
+ * implementation), undefined otherwise
+ *
+ * Clear various bits and enable access to the VFP so we can
+ * handle the bounce.
*/
- fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_FPV2|FPEXC_INV|FPEXC_UFC|FPEXC_OFC|FPEXC_IOC));
+ fmxr(FPEXC, fpexc & ~(FPEXC_EX|FPEXC_DEX|FPEXC_FP2V|FPEXC_VV|FPEXC_TRAP_MASK));
+ fpsid = fmrx(FPSID);
orig_fpscr = fpscr = fmrx(FPSCR);
/*
- * If we are running with inexact exceptions enabled, we need to
- * emulate the trigger instruction. Note that as we're emulating
- * the trigger instruction, we need to increment PC.
+ * Check for the special VFP subarch 1 and FPSCR.IXE bit case
*/
- if (fpscr & FPSCR_IXE) {
- regs->ARM_pc += 4;
+ if ((fpsid & FPSID_ARCH_MASK) == (1 << FPSID_ARCH_BIT)
+ && (fpscr & FPSCR_IXE)) {
+ /*
+ * Synchronous exception, emulate the trigger instruction
+ */
goto emulate;
}
- barrier();
+ if (fpexc & FPEXC_EX) {
+ /*
+ * Asynchronous exception. The instruction is read from FPINST
+ * and the interrupted instruction has to be restarted.
+ */
+ trigger = fmrx(FPINST);
+ regs->ARM_pc -= 4;
+ } else if (!(fpexc & FPEXC_DEX)) {
+ /*
+ * Illegal combination of bits. It can be caused by an
+ * unallocated VFP instruction but with FPSCR.IXE set and not
+ * on VFP subarch 1.
+ */
+ vfp_raise_exceptions(VFP_EXCEPTION_ERROR, trigger, fpscr, regs);
+ return;
+ }
/*
- * Modify fpscr to indicate the number of iterations remaining
+ * Modify fpscr to indicate the number of iterations remaining.
+ * If FPEXC.EX is 0, FPEXC.DEX is 1 and the FPEXC.VV bit indicates
+ * whether FPEXC.VECITR or FPSCR.LEN is used.
*/
- if (fpexc & FPEXC_EX) {
+ if (fpexc & (FPEXC_EX | FPEXC_VV)) {
u32 len;
len = fpexc + (1 << FPEXC_LENGTH_BIT);
@@ -262,15 +288,15 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
* FPEXC bounce reason, but this appears to be unreliable.
* Emulate the bounced instruction instead.
*/
- inst = fmrx(FPINST);
- exceptions = vfp_emulate_instruction(inst, fpscr, regs);
+ exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
if (exceptions)
- vfp_raise_exceptions(exceptions, inst, orig_fpscr, regs);
+ vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
/*
- * If there isn't a second FP instruction, exit now.
+ * If there isn't a second FP instruction, exit now. Note that
+ * the FPEXC.FP2V bit is valid only if FPEXC.EX is 1.
*/
- if (!(fpexc & FPEXC_FPV2))
+ if (fpexc ^ (FPEXC_EX | FPEXC_FP2V))
return;
/*
@@ -279,10 +305,9 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
*/
barrier();
trigger = fmrx(FPINST2);
- orig_fpscr = fpscr = fmrx(FPSCR);
emulate:
- exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
+ exceptions = vfp_emulate_instruction(trigger, orig_fpscr, regs);
if (exceptions)
vfp_raise_exceptions(exceptions, trigger, orig_fpscr, regs);
}
@@ -306,16 +331,9 @@ static int __init vfp_init(void)
{
unsigned int vfpsid;
unsigned int cpu_arch = cpu_architecture();
- u32 access = 0;
- if (cpu_arch >= CPU_ARCH_ARMv6) {
- access = get_copro_access();
-
- /*
- * Enable full access to VFP (cp10 and cp11)
- */
- set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
- }
+ if (cpu_arch >= CPU_ARCH_ARMv6)
+ vfp_enable(NULL);
/*
* First check that there is a VFP that we can use.
@@ -329,15 +347,9 @@ static int __init vfp_init(void)
vfp_vector = vfp_null_entry;
printk(KERN_INFO "VFP support v0.3: ");
- if (VFP_arch) {
+ if (VFP_arch)
printk("not present\n");
-
- /*
- * Restore the copro access register.
- */
- if (cpu_arch >= CPU_ARCH_ARMv6)
- set_copro_access(access);
- } else if (vfpsid & FPSID_NODOUBLE) {
+ else if (vfpsid & FPSID_NODOUBLE) {
printk("no double precision support\n");
} else {
smp_call_function(vfp_enable, NULL, 1, 1);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 9af05a2f4af..a6728661c41 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -212,7 +212,7 @@ config MII
config MACB
tristate "Atmel MACB support"
- depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263
+ depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91CAP9
select PHYLIB
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index facb6785561..6a48dfa1efe 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -277,6 +277,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
if (termios->c_iflag & INPCK)
port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
+ tty_encode_baud_rate(tty, baud, baud);
+
/*
* Which character status flags should we ignore?
*/
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f81d08d6538..77a3759d6fc 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -308,7 +308,7 @@ config USB_S3C2410_DEBUG
config USB_GADGET_AT91
boolean "AT91 USB Device Port"
- depends on ARCH_AT91 && !ARCH_AT91SAM9RL
+ depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5b3dbcfcda4..758435f8a6f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -889,7 +889,7 @@ config FB_S1D13XXX
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 7c30cc8df71..f8e71114750 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -30,7 +30,7 @@
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
-#if defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
#define ATMEL_LCDC_FIFO_SIZE 2048
#else
#define ATMEL_LCDC_FIFO_SIZE 512
diff --git a/include/asm-arm/arch-at91/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h
deleted file mode 100644
index ab040a40d37..00000000000
--- a/include/asm-arm/arch-at91/at91_lcdc.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_lcdc.h
- *
- * LCD Controller (LCDC).
- * Based on AT91SAM9261 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_LCDC_H
-#define AT91_LCDC_H
-
-#define AT91_LCDC_DMABADDR1 0x00 /* DMA Base Address Register 1 */
-#define AT91_LCDC_DMABADDR2 0x04 /* DMA Base Address Register 2 */
-#define AT91_LCDC_DMAFRMPT1 0x08 /* DMA Frame Pointer Register 1 */
-#define AT91_LCDC_DMAFRMPT2 0x0c /* DMA Frame Pointer Register 2 */
-#define AT91_LCDC_DMAFRMADD1 0x10 /* DMA Frame Address Register 1 */
-#define AT91_LCDC_DMAFRMADD2 0x14 /* DMA Frame Address Register 2 */
-
-#define AT91_LCDC_DMAFRMCFG 0x18 /* DMA Frame Configuration Register */
-#define AT91_LCDC_FRSIZE (0x7fffff << 0) /* Frame Size */
-#define AT91_LCDC_BLENGTH (0x7f << 24) /* Burst Length */
-
-#define AT91_LCDC_DMACON 0x1c /* DMA Control Register */
-#define AT91_LCDC_DMAEN (0x1 << 0) /* DMA Enable */
-#define AT91_LCDC_DMARST (0x1 << 1) /* DMA Reset */
-#define AT91_LCDC_DMABUSY (0x1 << 2) /* DMA Busy */
-
-#define AT91_LCDC_LCDCON1 0x0800 /* LCD Control Register 1 */
-#define AT91_LCDC_BYPASS (1 << 0) /* Bypass lcd_dotck divider */
-#define AT91_LCDC_CLKVAL (0x1ff << 12) /* Clock Divider */
-#define AT91_LCDC_LINCNT (0x7ff << 21) /* Line Counter */
-
-#define AT91_LCDC_LCDCON2 0x0804 /* LCD Control Register 2 */
-#define AT91_LCDC_DISTYPE (3 << 0) /* Display Type */
-#define AT91_LCDC_DISTYPE_STNMONO (0 << 0)
-#define AT91_LCDC_DISTYPE_STNCOLOR (1 << 0)
-#define AT91_LCDC_DISTYPE_TFT (2 << 0)
-#define AT91_LCDC_SCANMOD (1 << 2) /* Scan Mode */
-#define AT91_LCDC_SCANMOD_SINGLE (0 << 2)
-#define AT91_LCDC_SCANMOD_DUAL (1 << 2)
-#define AT91_LCDC_IFWIDTH (3 << 3) /*Interface Width */
-#define AT91_LCDC_IFWIDTH_4 (0 << 3)
-#define AT91_LCDC_IFWIDTH_8 (1 << 3)
-#define AT91_LCDC_IFWIDTH_16 (2 << 3)
-#define AT91_LCDC_PIXELSIZE (7 << 5) /* Bits per pixel */
-#define AT91_LCDC_PIXELSIZE_1 (0 << 5)
-#define AT91_LCDC_PIXELSIZE_2 (1 << 5)
-#define AT91_LCDC_PIXELSIZE_4 (2 << 5)
-#define AT91_LCDC_PIXELSIZE_8 (3 << 5)
-#define AT91_LCDC_PIXELSIZE_16 (4 << 5)
-#define AT91_LCDC_PIXELSIZE_24 (5 << 5)
-#define AT91_LCDC_INVVD (1 << 8) /* LCD Data polarity */
-#define AT91_LCDC_INVVD_NORMAL (0 << 8)
-#define AT91_LCDC_INVVD_INVERTED (1 << 8)
-#define AT91_LCDC_INVFRAME (1 << 9 ) /* LCD VSync polarity */
-#define AT91_LCDC_INVFRAME_NORMAL (0 << 9)
-#define AT91_LCDC_INVFRAME_INVERTED (1 << 9)
-#define AT91_LCDC_INVLINE (1 << 10) /* LCD HSync polarity */
-#define AT91_LCDC_INVLINE_NORMAL (0 << 10)
-#define AT91_LCDC_INVLINE_INVERTED (1 << 10)
-#define AT91_LCDC_INVCLK (1 << 11) /* LCD dotclk polarity */
-#define AT91_LCDC_INVCLK_NORMAL (0 << 11)
-#define AT91_LCDC_INVCLK_INVERTED (1 << 11)
-#define AT91_LCDC_INVDVAL (1 << 12) /* LCD dval polarity */
-#define AT91_LCDC_INVDVAL_NORMAL (0 << 12)
-#define AT91_LCDC_INVDVAL_INVERTED (1 << 12)
-#define AT91_LCDC_CLKMOD (1 << 15) /* LCD dotclk mode */
-#define AT91_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
-#define AT91_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
-#define AT91_LCDC_MEMOR (1 << 31) /* Memory Ordering Format */
-#define AT91_LCDC_MEMOR_BIG (0 << 31)
-#define AT91_LCDC_MEMOR_LITTLE (1 << 31)
-
-#define AT91_LCDC_TIM1 0x0808 /* LCD Timing Register 1 */
-#define AT91_LCDC_VFP (0xff << 0) /* Vertical Front Porch */
-#define AT91_LCDC_VBP (0xff << 8) /* Vertical Back Porch */
-#define AT91_LCDC_VPW (0x3f << 16) /* Vertical Synchronization Pulse Width */
-#define AT91_LCDC_VHDLY (0xf << 24) /* Vertical to Horizontal Delay */
-
-#define AT91_LCDC_TIM2 0x080c /* LCD Timing Register 2 */
-#define AT91_LCDC_HBP (0xff << 0) /* Horizontal Back Porch */
-#define AT91_LCDC_HPW (0x3f << 8) /* Horizontal Synchronization Pulse Width */
-#define AT91_LCDC_HFP (0x7ff << 21) /* Horizontal Front Porch */
-
-#define AT91_LCDC_LCDFRMCFG 0x0810 /* LCD Frame Configuration Register */
-#define AT91_LCDC_LINEVAL (0x7ff << 0) /* Vertical Size of LCD Module */
-#define AT91_LCDC_HOZVAL (0x7ff << 21) /* Horizontal Size of LCD Module */
-
-#define AT91_LCDC_FIFO 0x0814 /* LCD FIFO Register */
-#define AT91_LCDC_FIFOTH (0xffff) /* FIFO Threshold */
-
-#define AT91_LCDC_DP1_2 0x081c /* Dithering Pattern DP1_2 Register */
-#define AT91_LCDC_DP4_7 0x0820 /* Dithering Pattern DP4_7 Register */
-#define AT91_LCDC_DP3_5 0x0824 /* Dithering Pattern DP3_5 Register */
-#define AT91_LCDC_DP2_3 0x0828 /* Dithering Pattern DP2_3 Register */
-#define AT91_LCDC_DP5_7 0x082c /* Dithering Pattern DP5_7 Register */
-#define AT91_LCDC_DP3_4 0x0830 /* Dithering Pattern DP3_4 Register */
-#define AT91_LCDC_DP4_5 0x0834 /* Dithering Pattern DP4_5 Register */
-#define AT91_LCDC_DP6_7 0x0838 /* Dithering Pattern DP6_7 Register */
-#define AT91_LCDC_DP1_2_VAL (0xff)
-#define AT91_LCDC_DP4_7_VAL (0xfffffff)
-#define AT91_LCDC_DP3_5_VAL (0xfffff)
-#define AT91_LCDC_DP2_3_VAL (0xfff)
-#define AT91_LCDC_DP5_7_VAL (0xfffffff)
-#define AT91_LCDC_DP3_4_VAL (0xffff)
-#define AT91_LCDC_DP4_5_VAL (0xfffff)
-#define AT91_LCDC_DP6_7_VAL (0xfffffff)
-
-#define AT91_LCDC_PWRCON 0x083c /* Power Control Register */
-#define AT91_LCDC_PWR (1 << 0) /* LCD Module Power Control */
-#define AT91_LCDC_GUARDT (0x7f << 1) /* Delay in Frame Period */
-#define AT91_LCDC_BUSY (1 << 31) /* LCD Busy */
-
-#define AT91_LCDC_CONTRAST_CTR 0x0840 /* Contrast Control Register */
-#define AT91_LCDC_PS (3 << 0) /* Contrast Counter Prescaler */
-#define AT91_LCDC_PS_DIV1 (0 << 0)
-#define AT91_LCDC_PS_DIV2 (1 << 0)
-#define AT91_LCDC_PS_DIV4 (2 << 0)
-#define AT91_LCDC_PS_DIV8 (3 << 0)
-#define AT91_LCDC_POL (1 << 2) /* Polarity of output Pulse */
-#define AT91_LCDC_POL_NEGATIVE (0 << 2)
-#define AT91_LCDC_POL_POSITIVE (1 << 2)
-#define AT91_LCDC_ENA (1 << 3) /* PWM generator Control */
-#define AT91_LCDC_ENA_PWMDISABLE (0 << 3)
-#define AT91_LCDC_ENA_PWMENABLE (1 << 3)
-
-#define AT91_LCDC_CONTRAST_VAL 0x0844 /* Contrast Value Register */
-#define AT91_LCDC_CVAL (0xff) /* PWM compare value */
-
-#define AT91_LCDC_IER 0x0848 /* Interrupt Enable Register */
-#define AT91_LCDC_IDR 0x084c /* Interrupt Disable Register */
-#define AT91_LCDC_IMR 0x0850 /* Interrupt Mask Register */
-#define AT91_LCDC_ISR 0x0854 /* Interrupt Enable Register */
-#define AT91_LCDC_ICR 0x0858 /* Interrupt Clear Register */
-#define AT91_LCDC_LNI (1 << 0) /* Line Interrupt */
-#define AT91_LCDC_LSTLNI (1 << 1) /* Last Line Interrupt */
-#define AT91_LCDC_EOFI (1 << 2) /* DMA End Of Frame Interrupt */
-#define AT91_LCDC_UFLWI (1 << 4) /* FIFO Underflow Interrupt */
-#define AT91_LCDC_OWRI (1 << 5) /* FIFO Overwrite Interrupt */
-#define AT91_LCDC_MERI (1 << 6) /* DMA Memory Error Interrupt */
-
-#define AT91_LCDC_LUT_(n) (0x0c00 + ((n)*4)) /* Palette Entry 0..255 */
-
-#endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index 33ff5b6798e..52cd8e5dabc 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -25,6 +25,7 @@
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
+#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
@@ -37,7 +38,9 @@
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+
+#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
@@ -52,6 +55,10 @@
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
+#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
+#define AT91_PMC_USBDIV_1 (0 << 28)
+#define AT91_PMC_USBDIV_2 (1 << 28)
+#define AT91_PMC_USBDIV_4 (2 << 28)
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
index bae1103fbbb..39a32633b27 100644
--- a/include/asm-arm/arch-at91/at91_rtt.h
+++ b/include/asm-arm/arch-at91/at91_rtt.h
@@ -13,19 +13,19 @@
#ifndef AT91_RTT_H
#define AT91_RTT_H
-#define AT91_RTT_MR (AT91_RTT + 0x00) /* Real-time Mode Register */
+#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
-#define AT91_RTT_AR (AT91_RTT + 0x04) /* Real-time Alarm Register */
+#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
-#define AT91_RTT_VR (AT91_RTT + 0x08) /* Real-time Value Register */
+#define AT91_RTT_VR 0x08 /* Real-time Value Register */
#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
-#define AT91_RTT_SR (AT91_RTT + 0x0c) /* Real-time Status Register */
+#define AT91_RTT_SR 0x0c /* Real-time Status Register */
#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
index ca9a9073345..f9f2e3cd95c 100644
--- a/include/asm-arm/arch-at91/at91_twi.h
+++ b/include/asm-arm/arch-at91/at91_twi.h
@@ -21,6 +21,8 @@
#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */
#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */
#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */
+#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */
+#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */
#define AT91_TWI_SWRST (1 << 7) /* Software Reset */
#define AT91_TWI_MMR 0x04 /* Master Mode Register */
@@ -32,6 +34,9 @@
#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */
#define AT91_TWI_DADR (0x7f << 16) /* Device Address */
+#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */
+#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */
+
#define AT91_TWI_IADR 0x0c /* Internal Address Register */
#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */
@@ -43,9 +48,15 @@
#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */
#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */
#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */
+#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */
+#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */
+#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */
#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */
#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */
#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */
+#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */
+#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */
+#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */
#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */
#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */
diff --git a/include/asm-arm/arch-at91/at91cap9.h b/include/asm-arm/arch-at91/at91cap9.h
new file mode 100644
index 00000000000..73e1fcf4a0a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0 8 /* USART 0 */
+#define AT91CAP9_ID_US1 9 /* USART 1 */
+#define AT91CAP9_ID_US2 10 /* USART 2 */
+#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN 13 /* CAN */
+#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */
+#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC 22 /* Ethernet */
+#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC 26 /* LCD Controller */
+#define AT91CAP9_ID_DMA 27 /* DMA Controller */
+#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP 29 /* USB Host Port */
+#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS 0xfff78000
+#define AT91CAP9_BASE_TCB0 0xfff7c000
+#define AT91CAP9_BASE_TC0 0xfff7c000
+#define AT91CAP9_BASE_TC1 0xfff7c040
+#define AT91CAP9_BASE_TC2 0xfff7c080
+#define AT91CAP9_BASE_MCI0 0xfff80000
+#define AT91CAP9_BASE_MCI1 0xfff84000
+#define AT91CAP9_BASE_TWI 0xfff88000
+#define AT91CAP9_BASE_US0 0xfff8c000
+#define AT91CAP9_BASE_US1 0xfff90000
+#define AT91CAP9_BASE_US2 0xfff94000
+#define AT91CAP9_BASE_SSC0 0xfff98000
+#define AT91CAP9_BASE_SSC1 0xfff9c000
+#define AT91CAP9_BASE_AC97C 0xfffa0000
+#define AT91CAP9_BASE_SPI0 0xfffa4000
+#define AT91CAP9_BASE_SPI1 0xfffa8000
+#define AT91CAP9_BASE_CAN 0xfffac000
+#define AT91CAP9_BASE_PWMC 0xfffb8000
+#define AT91CAP9_BASE_EMAC 0xfffbc000
+#define AT91CAP9_BASE_ADC 0xfffc0000
+#define AT91CAP9_BASE_ISI 0xfffc4000
+#define AT91_BASE_SYS 0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC (0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC (0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA (0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */
+#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
+
+#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91cap9_matrix.h b/include/asm-arm/arch-at91/at91cap9_matrix.h
new file mode 100644
index 00000000000..a641686b6c3
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
@@ -0,0 +1,132 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9_matrix.h
+ *
+ * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
+#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
+#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
+#define AT91_MATRIX_RCB11 (1 << 11)
+
+#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */
+#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
index aacb1e97642..a8e9fec6c73 100644
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -67,7 +67,7 @@
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5 ) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
index 6fc6e4be624..72f6e668e41 100644
--- a/include/asm-arm/arch-at91/at91sam9263_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h
@@ -44,7 +44,7 @@
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
diff --git a/include/asm-arm/arch-at91/at91sam9rl_matrix.h b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
index b15f11b7c08..84224174e6a 100644
--- a/include/asm-arm/arch-at91/at91sam9rl_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9rl_matrix.h
@@ -38,7 +38,7 @@
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index 79054965baa..55b07bd5316 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -34,6 +34,7 @@
#include <linux/mtd/partitions.h>
#include <linux/device.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <linux/spi/spi.h>
/* USB Device */
@@ -71,7 +72,7 @@ struct at91_eth_data {
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9)
#define eth_platform_data at91_eth_data
#endif
@@ -101,13 +102,23 @@ extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_de
extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
/* Serial */
+#define ATMEL_UART_CTS 0x01
+#define ATMEL_UART_RTS 0x02
+#define ATMEL_UART_DSR 0x04
+#define ATMEL_UART_DTR 0x08
+#define ATMEL_UART_DCD 0x10
+#define ATMEL_UART_RI 0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+extern void __init at91_set_serial_console(unsigned portnr);
+
struct at91_uart_config {
unsigned short console_tty; /* tty number of serial console */
unsigned short nr_tty; /* number of serial tty's */
short tty_map[]; /* map UART to tty number */
};
extern struct platform_device *atmel_default_console_device;
-extern void __init at91_init_serial(struct at91_uart_config *config);
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
@@ -116,6 +127,23 @@ struct atmel_uart_data {
};
extern void __init at91_add_device_serial(void);
+/*
+ * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
+ * platform devices. Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK 0x01
+#define ATMEL_SSC_TF 0x02
+#define ATMEL_SSC_TD 0x04
+#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK 0x10
+#define ATMEL_SSC_RF 0x20
+#define ATMEL_SSC_RD 0x40
+#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
/* LCD Controller */
struct atmel_lcdfb_info;
extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
@@ -126,10 +154,12 @@ struct atmel_ac97_data {
};
extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+ /* ISI */
+extern void __init at91_add_device_isi(void);
+
/* LEDs */
-extern u8 at91_leds_cpu;
-extern u8 at91_leds_timer;
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 080cbb401a8..7145166826a 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -21,13 +21,13 @@
#define ARCH_ID_AT91SAM9260 0x019803a0
#define ARCH_ID_AT91SAM9261 0x019703a0
#define ARCH_ID_AT91SAM9263 0x019607a0
+#define ARCH_ID_AT91SAM9RL64 0x019b03a0
+#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-#define ARCH_ID_AT91SAM9RL64 0x019b03a0
-
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
@@ -81,6 +81,11 @@ static inline unsigned long at91_arch_identify(void)
#define cpu_is_at91sam9rl() (0)
#endif
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9() (0)
+#endif
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
index cc1d850a078..1005eee6219 100644
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -17,13 +17,13 @@
.endm
.macro get_irqnr_preamble, base, tmp
+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 8f1cdd38a96..2c826d8247a 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -26,6 +26,8 @@
#include <asm/arch/at91sam9263.h>
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <asm/arch/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <asm/arch/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <asm/arch/at91x40.h>
#else
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index a310698fb4d..f1933b0fa43 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -42,6 +42,11 @@
#define AT91SAM9_MASTER_CLOCK 100000000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK 100000000
+#define CLOCK_TICK_RATE (AT91CAP9_MASTER_CLOCK/16)
+
#elif defined(CONFIG_ARCH_AT91X40)
#define AT91X40_MASTER_CLOCK 40000000
diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h
index 1ee14a14cba..9b1864bbd9a 100644
--- a/include/asm-arm/arch-ep93xx/gpio.h
+++ b/include/asm-arm/arch-ep93xx/gpio.h
@@ -5,16 +5,6 @@
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
-#define GPIO_IN 0
-#define GPIO_OUT 1
-
-#define EP93XX_GPIO_LOW 0
-#define EP93XX_GPIO_HIGH 1
-
-extern void gpio_line_config(int line, int direction);
-extern int gpio_line_get(int line);
-extern void gpio_line_set(int line, int value);
-
/* GPIO port A. */
#define EP93XX_GPIO_LINE_A(x) ((x) + 0)
#define EP93XX_GPIO_LINE_EGPIO0 EP93XX_GPIO_LINE_A(0)
@@ -38,7 +28,7 @@ extern void gpio_line_set(int line, int value);
#define EP93XX_GPIO_LINE_EGPIO15 EP93XX_GPIO_LINE_B(7)
/* GPIO port C. */
-#define EP93XX_GPIO_LINE_C(x) ((x) + 16)
+#define EP93XX_GPIO_LINE_C(x) ((x) + 40)
#define EP93XX_GPIO_LINE_ROW0 EP93XX_GPIO_LINE_C(0)
#define EP93XX_GPIO_LINE_ROW1 EP93XX_GPIO_LINE_C(1)
#define EP93XX_GPIO_LINE_ROW2 EP93XX_GPIO_LINE_C(2)
@@ -71,7 +61,7 @@ extern void gpio_line_set(int line, int value);
#define EP93XX_GPIO_LINE_IDEDA2 EP93XX_GPIO_LINE_E(7)
/* GPIO port F. */
-#define EP93XX_GPIO_LINE_F(x) ((x) + 40)
+#define EP93XX_GPIO_LINE_F(x) ((x) + 16)
#define EP93XX_GPIO_LINE_WP EP93XX_GPIO_LINE_F(0)
#define EP93XX_GPIO_LINE_MCCD1 EP93XX_GPIO_LINE_F(1)
#define EP93XX_GPIO_LINE_MCCD2 EP93XX_GPIO_LINE_F(2)
@@ -103,5 +93,49 @@ extern void gpio_line_set(int line, int value);
#define EP93XX_GPIO_LINE_DD6 EP93XX_GPIO_LINE_H(6)
#define EP93XX_GPIO_LINE_DD7 EP93XX_GPIO_LINE_H(7)
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ if (gpio > EP93XX_GPIO_LINE_MAX)
+ return -EINVAL;
+ return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+/*
+ * Map GPIO A0..A7 (0..7) to irq 64..71,
+ * B0..B7 (7..15) to irq 72..79, and
+ * F0..F7 (16..24) to irq 80..87.
+ */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
+ return 64 + gpio;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq - gpio_to_irq(0);
+}
#endif
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
index 2a8c63638c5..53d4a68bfc8 100644
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ b/include/asm-arm/arch-ep93xx/irqs.h
@@ -67,12 +67,6 @@
#define IRQ_EP93XX_SAI 60
#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
-/*
- * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and
- * F0..F7 to 80..87.
- */
-#define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f))
-
#define NR_EP93XX_IRQS (64 + 24)
#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
index eeeea90cd5a..9c5d2357aff 100644
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -61,13 +61,13 @@ __ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
return __arm_ioremap(addr, size, mtype);
- return (void *)addr;
+ return (void __iomem *)addr;
}
static inline void
__ixp4xx_iounmap(void __iomem *addr)
{
- if ((u32)addr >= VMALLOC_START)
+ if ((__force u32)addr >= VMALLOC_START)
__iounmap(addr);
}
@@ -141,9 +141,9 @@ __ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
static inline void
__ixp4xx_writel(u32 value, volatile void __iomem *p)
{
- u32 addr = (u32)p;
+ u32 addr = (__force u32)p;
if (addr >= VMALLOC_START) {
- __raw_writel(value, addr);
+ __raw_writel(value, p);
return;
}
@@ -208,11 +208,11 @@ __ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
static inline unsigned long
__ixp4xx_readl(const volatile void __iomem *p)
{
- u32 addr = (u32)p;
+ u32 addr = (__force u32)p;
u32 data;
if (addr >= VMALLOC_START)
- return __raw_readl(addr);
+ return __raw_readl(p);
if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
return 0xffffffff;
@@ -438,7 +438,7 @@ __ixp4xx_ioread32(const void __iomem *addr)
return (unsigned int)__ixp4xx_inl(port & PIO_MASK);
else {
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- return le32_to_cpu(__raw_readl((u32)port));
+ return le32_to_cpu((__force __le32)__raw_readl(addr));
#else
return (unsigned int)__ixp4xx_readl(addr);
#endif
@@ -523,7 +523,7 @@ __ixp4xx_iowrite32(u32 value, void __iomem *addr)
__ixp4xx_outl(value, port & PIO_MASK);
else
#ifndef CONFIG_IXP4XX_INDIRECT_PCI
- __raw_writel(cpu_to_le32(value), port);
+ __raw_writel((u32 __force)cpu_to_le32(value), addr);
#else
__ixp4xx_writel(value, addr);
#endif
diff --git a/include/asm-arm/arch-ks8695/regs-gpio.h b/include/asm-arm/arch-ks8695/regs-gpio.h
index 57fcf9fc82e..6b95d77aea1 100644
--- a/include/asm-arm/arch-ks8695/regs-gpio.h
+++ b/include/asm-arm/arch-ks8695/regs-gpio.h
@@ -49,5 +49,7 @@
#define IOPC_TM_FALLING (4) /* Falling Edge Detection */
#define IOPC_TM_EDGE (6) /* Both Edge Detection */
+/* Port Data Register */
+#define IOPD_(x) (1 << (x)) /* Signal Level of GPIO Pin x */
#endif
diff --git a/include/asm-arm/arch-msm/board.h b/include/asm-arm/arch-msm/board.h
new file mode 100644
index 00000000000..763051f8ba1
--- /dev/null
+++ b/include/asm-arm/arch-msm/board.h
@@ -0,0 +1,37 @@
+/* linux/include/asm-arm/arch-msm/board.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_BOARD_H
+#define __ASM_ARCH_MSM_BOARD_H
+
+#include <linux/types.h>
+
+/* platform device data structures */
+
+struct msm_mddi_platform_data
+{
+ void (*panel_power)(int on);
+ unsigned has_vsync_irq:1;
+};
+
+/* common init routines for use by arch/arm/mach-msm/board-*.c */
+
+void __init msm_add_devices(void);
+void __init msm_map_common_io(void);
+void __init msm_init_irq(void);
+void __init msm_init_gpio(void);
+
+#endif
diff --git a/include/asm-arm/arch-msm/debug-macro.S b/include/asm-arm/arch-msm/debug-macro.S
new file mode 100644
index 00000000000..393d5272e50
--- /dev/null
+++ b/include/asm-arm/arch-msm/debug-macro.S
@@ -0,0 +1,40 @@
+/* include/asm-arm/arch-msm7200/debug-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/msm_iomap.h>
+
+ .macro addruart,rx
+ @ see if the MMU is enabled and select appropriate base address
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, =MSM_UART1_PHYS
+ ldrne \rx, =MSM_UART1_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0C]
+ .endm
+
+ .macro waituart,rd,rx
+ @ wait for TX_READY
+1: ldr \rd, [\rx, #0x08]
+ tst \rd, #0x04
+ beq 1b
+ .endm
+
+ .macro busyuart,rd,rx
+ .endm
diff --git a/include/asm-arm/arch-msm/dma.h b/include/asm-arm/arch-msm/dma.h
new file mode 100644
index 00000000000..e4b565b27b3
--- /dev/null
+++ b/include/asm-arm/arch-msm/dma.h
@@ -0,0 +1,151 @@
+/* linux/include/asm-arm/arch-msm/dma.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_DMA_H
+
+#include <linux/list.h>
+#include <asm/arch/msm_iomap.h>
+
+struct msm_dmov_cmd {
+ struct list_head list;
+ unsigned int cmdptr;
+ void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
+/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+};
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
+/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
+
+
+
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+/* only security domain 3 is available to the ARM11
+ * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
+ */
+
+#define DMOV_CMD_PTR(ch) DMOV_SD3(0x000, ch)
+#define DMOV_CMD_LIST (0 << 29) /* does not work */
+#define DMOV_CMD_PTR_LIST (1 << 29) /* works */
+#define DMOV_CMD_INPUT_CFG (2 << 29) /* untested */
+#define DMOV_CMD_OUTPUT_CFG (3 << 29) /* untested */
+#define DMOV_CMD_ADDR(addr) ((addr) >> 3)
+
+#define DMOV_RSLT(ch) DMOV_SD3(0x040, ch)
+#define DMOV_RSLT_VALID (1 << 31) /* 0 == host has empties result fifo */
+#define DMOV_RSLT_ERROR (1 << 3)
+#define DMOV_RSLT_FLUSH (1 << 2)
+#define DMOV_RSLT_DONE (1 << 1) /* top pointer done */
+#define DMOV_RSLT_USER (1 << 0) /* command with FR force result */
+
+#define DMOV_FLUSH0(ch) DMOV_SD3(0x080, ch)
+#define DMOV_FLUSH1(ch) DMOV_SD3(0x0C0, ch)
+#define DMOV_FLUSH2(ch) DMOV_SD3(0x100, ch)
+#define DMOV_FLUSH3(ch) DMOV_SD3(0x140, ch)
+#define DMOV_FLUSH4(ch) DMOV_SD3(0x180, ch)
+#define DMOV_FLUSH5(ch) DMOV_SD3(0x1C0, ch)
+
+#define DMOV_STATUS(ch) DMOV_SD3(0x200, ch)
+#define DMOV_STATUS_RSLT_COUNT(n) (((n) >> 29))
+#define DMOV_STATUS_CMD_COUNT(n) (((n) >> 27) & 3)
+#define DMOV_STATUS_RSLT_VALID (1 << 1)
+#define DMOV_STATUS_CMD_PTR_RDY (1 << 0)
+
+#define DMOV_ISR DMOV_SD3(0x380, 0)
+
+#define DMOV_CONFIG(ch) DMOV_SD3(0x300, ch)
+#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
+#define DMOV_CONFIG_FORCE_FLUSH_RSLT (1 << 1)
+#define DMOV_CONFIG_IRQ_EN (1 << 0)
+
+/* channel assignments */
+
+#define DMOV_NAND_CHAN 7
+#define DMOV_NAND_CRCI_CMD 5
+#define DMOV_NAND_CRCI_DATA 4
+
+#define DMOV_SDC1_CHAN 8
+#define DMOV_SDC1_CRCI 6
+
+#define DMOV_SDC2_CHAN 8
+#define DMOV_SDC2_CRCI 7
+
+#define DMOV_TSIF_CHAN 10
+#define DMOV_TSIF_CRCI 10
+
+#define DMOV_USB_CHAN 11
+
+/* no client rate control ifc (eg, ram) */
+#define DMOV_NONE_CRCI 0
+
+
+/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
+ * is going to walk a list of 32bit pointers as described below. Each
+ * pointer points to a *array* of dmov_s, etc structs. The last pointer
+ * in the list is marked with CMD_PTR_LP. The last struct in each array
+ * is marked with CMD_LC (see below).
+ */
+#define CMD_PTR_ADDR(addr) ((addr) >> 3)
+#define CMD_PTR_LP (1 << 31) /* last pointer */
+#define CMD_PTR_PT (3 << 29) /* ? */
+
+/* Single Item Mode */
+typedef struct {
+ unsigned cmd;
+ unsigned src;
+ unsigned dst;
+ unsigned len;
+} dmov_s;
+
+/* Scatter/Gather Mode */
+typedef struct {
+ unsigned cmd;
+ unsigned src_dscr;
+ unsigned dst_dscr;
+ unsigned _reserved;
+} dmov_sg;
+
+/* bits for the cmd field of the above structures */
+
+#define CMD_LC (1 << 31) /* last command */
+#define CMD_FR (1 << 22) /* force result -- does not work? */
+#define CMD_OCU (1 << 21) /* other channel unblock */
+#define CMD_OCB (1 << 20) /* other channel block */
+#define CMD_TCB (1 << 19) /* ? */
+#define CMD_DAH (1 << 18) /* destination address hold -- does not work?*/
+#define CMD_SAH (1 << 17) /* source address hold -- does not work? */
+
+#define CMD_MODE_SINGLE (0 << 0) /* dmov_s structure used */
+#define CMD_MODE_SG (1 << 0) /* untested */
+#define CMD_MODE_IND_SG (2 << 0) /* untested */
+#define CMD_MODE_BOX (3 << 0) /* untested */
+
+#define CMD_DST_SWAP_BYTES (1 << 14) /* exchange each byte n with byte n+1 */
+#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
+#define CMD_DST_SWAP_WORDS (1 << 16) /* exchange each word n with word n+1 */
+
+#define CMD_SRC_SWAP_BYTES (1 << 11) /* exchange each byte n with byte n+1 */
+#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
+#define CMD_SRC_SWAP_WORDS (1 << 13) /* exchange each word n with word n+1 */
+
+#define CMD_DST_CRCI(n) (((n) & 15) << 7)
+#define CMD_SRC_CRCI(n) (((n) & 15) << 3)
+
+#endif
diff --git a/include/asm-arm/arch-msm/entry-macro.S b/include/asm-arm/arch-msm/entry-macro.S
new file mode 100644
index 00000000000..ee24aece4cb
--- /dev/null
+++ b/include/asm-arm/arch-msm/entry-macro.S
@@ -0,0 +1,38 @@
+/* include/asm-arm/arch-msm7200/entry-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/arch/msm_iomap.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ enable imprecise aborts
+ cpsie a
+ mov \base, #MSM_VIC_BASE
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ 0xD0 has irq# or old irq# if the irq has been handled
+ @ 0xD4 has irq# or -1 if none pending *but* if you just
+ @ read 0xD4 you never get the first irq for some reason
+ ldr \irqnr, [\base, #0xD0]
+ ldr \irqnr, [\base, #0xD4]
+ cmp \irqnr, #0xffffffff
+ .endm
diff --git a/include/asm-arm/arch-msm/hardware.h b/include/asm-arm/arch-msm/hardware.h
new file mode 100644
index 00000000000..89af2b70182
--- /dev/null
+++ b/include/asm-arm/arch-msm/hardware.h
@@ -0,0 +1,18 @@
+/* linux/include/asm-arm/arch-msm/hardware.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HARDWARE_H
+
+#endif
diff --git a/include/asm-arm/arch-msm/io.h b/include/asm-arm/arch-msm/io.h
new file mode 100644
index 00000000000..4645ae26b62
--- /dev/null
+++ b/include/asm-arm/arch-msm/io.h
@@ -0,0 +1,33 @@
+/* include/asm-arm/arch-msm/io.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __arch_ioremap __msm_ioremap
+#define __arch_iounmap __iounmap
+
+void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
+
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)addr;
+}
+#define __io(a) __io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/include/asm-arm/arch-msm/irqs.h b/include/asm-arm/arch-msm/irqs.h
new file mode 100644
index 00000000000..565430cfaa7
--- /dev/null
+++ b/include/asm-arm/arch-msm/irqs.h
@@ -0,0 +1,89 @@
+/* linux/include/asm-arm/arch-msm/irqs.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221 */
+
+#define INT_A9_M2A_0 0
+#define INT_A9_M2A_1 1
+#define INT_A9_M2A_2 2
+#define INT_A9_M2A_3 3
+#define INT_A9_M2A_4 4
+#define INT_A9_M2A_5 5
+#define INT_A9_M2A_6 6
+#define INT_GP_TIMER_EXP 7
+#define INT_DEBUG_TIMER_EXP 8
+#define INT_UART1 9
+#define INT_UART2 10
+#define INT_UART3 11
+#define INT_UART1_RX 12
+#define INT_UART2_RX 13
+#define INT_UART3_RX 14
+#define INT_USB_OTG 15
+#define INT_MDDI_PRI 16
+#define INT_MDDI_EXT 17
+#define INT_MDDI_CLIENT 18
+#define INT_MDP 19
+#define INT_GRAPHICS 20
+#define INT_ADM_AARM 21
+#define INT_ADSP_A11 22
+#define INT_ADSP_A9_A11 23
+#define INT_SDC1_0 24
+#define INT_SDC1_1 25
+#define INT_SDC2_0 26
+#define INT_SDC2_1 27
+#define INT_KEYSENSE 28
+#define INT_TCHSCRN_SSBI 29
+#define INT_TCHSCRN1 30
+#define INT_TCHSCRN2 31
+
+#define INT_GPIO_GROUP1 (32 + 0)
+#define INT_GPIO_GROUP2 (32 + 1)
+#define INT_PWB_I2C (32 + 2)
+#define INT_SOFTRESET (32 + 3)
+#define INT_NAND_WR_ER_DONE (32 + 4)
+#define INT_NAND_OP_DONE (32 + 5)
+#define INT_PBUS_ARM11 (32 + 6)
+#define INT_AXI_MPU_SMI (32 + 7)
+#define INT_AXI_MPU_EBI1 (32 + 8)
+#define INT_AD_HSSD (32 + 9)
+#define INT_ARM11_PMU (32 + 10)
+#define INT_ARM11_DMA (32 + 11)
+#define INT_TSIF_IRQ (32 + 12)
+#define INT_UART1DM_IRQ (32 + 13)
+#define INT_UART1DM_RX (32 + 14)
+#define INT_USB_HS (32 + 15)
+#define INT_SDC3_0 (32 + 16)
+#define INT_SDC3_1 (32 + 17)
+#define INT_SDC4_0 (32 + 18)
+#define INT_SDC4_1 (32 + 19)
+#define INT_UART2DM_RX (32 + 20)
+#define INT_UART2DM_IRQ (32 + 21)
+
+/* 22-31 are reserved */
+
+#define MSM_IRQ_BIT(irq) (1 << ((irq) & 31))
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+
+#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+
+#endif
diff --git a/include/asm-arm/arch-msm/memory.h b/include/asm-arm/arch-msm/memory.h
new file mode 100644
index 00000000000..b5ce0e9ac86
--- /dev/null
+++ b/include/asm-arm/arch-msm/memory.h
@@ -0,0 +1,27 @@
+/* linux/include/asm-arm/arch-msm/memory.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET UL(0x10000000)
+
+/* bus address and physical addresses are identical */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
+
diff --git a/include/asm-arm/arch-msm/msm_iomap.h b/include/asm-arm/arch-msm/msm_iomap.h
new file mode 100644
index 00000000000..b8955cc26fe
--- /dev/null
+++ b/include/asm-arm/arch-msm/msm_iomap.h
@@ -0,0 +1,104 @@
+/* linux/include/asm-arm/arch-msm/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough. Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_H
+#define __ASM_ARCH_MSM_IOMAP_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE 0xE0000000
+#define MSM_VIC_PHYS 0xC0000000
+#define MSM_VIC_SIZE SZ_4K
+
+#define MSM_CSR_BASE 0xE0001000
+#define MSM_CSR_PHYS 0xC0100000
+#define MSM_CSR_SIZE SZ_4K
+
+#define MSM_GPT_PHYS MSM_CSR_PHYS
+#define MSM_GPT_BASE MSM_CSR_BASE
+#define MSM_GPT_SIZE SZ_4K
+
+#define MSM_DMOV_BASE 0xE0002000
+#define MSM_DMOV_PHYS 0xA9700000
+#define MSM_DMOV_SIZE SZ_4K
+
+#define MSM_UART1_BASE 0xE0003000
+#define MSM_UART1_PHYS 0xA9A00000
+#define MSM_UART1_SIZE SZ_4K
+
+#define MSM_UART2_BASE 0xE0004000
+#define MSM_UART2_PHYS 0xA9B00000
+#define MSM_UART2_SIZE SZ_4K
+
+#define MSM_UART3_BASE 0xE0005000
+#define MSM_UART3_PHYS 0xA9C00000
+#define MSM_UART3_SIZE SZ_4K
+
+#define MSM_I2C_BASE 0xE0006000
+#define MSM_I2C_PHYS 0xA9900000
+#define MSM_I2C_SIZE SZ_4K
+
+#define MSM_GPIO1_BASE 0xE0007000
+#define MSM_GPIO1_PHYS 0xA9200000
+#define MSM_GPIO1_SIZE SZ_4K
+
+#define MSM_GPIO2_BASE 0xE0008000
+#define MSM_GPIO2_PHYS 0xA9300000
+#define MSM_GPIO2_SIZE SZ_4K
+
+#define MSM_HSUSB_BASE 0xE0009000
+#define MSM_HSUSB_PHYS 0xA0800000
+#define MSM_HSUSB_SIZE SZ_4K
+
+#define MSM_CLK_CTL_BASE 0xE000A000
+#define MSM_CLK_CTL_PHYS 0xA8600000
+#define MSM_CLK_CTL_SIZE SZ_4K
+
+#define MSM_PMDH_BASE 0xE000B000
+#define MSM_PMDH_PHYS 0xAA600000
+#define MSM_PMDH_SIZE SZ_4K
+
+#define MSM_EMDH_BASE 0xE000C000
+#define MSM_EMDH_PHYS 0xAA700000
+#define MSM_EMDH_SIZE SZ_4K
+
+#define MSM_MDP_BASE 0xE0010000
+#define MSM_MDP_PHYS 0xAA200000
+#define MSM_MDP_SIZE 0x000F0000
+
+#define MSM_SHARED_RAM_BASE 0xE0100000
+#define MSM_SHARED_RAM_PHYS 0x01F00000
+#define MSM_SHARED_RAM_SIZE SZ_1M
+
+#endif
diff --git a/include/asm-arm/arch-msm/system.h b/include/asm-arm/arch-msm/system.h
new file mode 100644
index 00000000000..7c5544bdd0c
--- /dev/null
+++ b/include/asm-arm/arch-msm/system.h
@@ -0,0 +1,23 @@
+/* linux/include/asm-arm/arch-msm/system.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <asm/hardware.h>
+
+void arch_idle(void);
+
+static inline void arch_reset(char mode)
+{
+ for (;;) ; /* depends on IPC w/ other core */
+}
diff --git a/include/asm-arm/arch-msm/timex.h b/include/asm-arm/arch-msm/timex.h
new file mode 100644
index 00000000000..154b23fb359
--- /dev/null
+++ b/include/asm-arm/arch-msm/timex.h
@@ -0,0 +1,20 @@
+/* linux/include/asm-arm/arch-msm/timex.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000000
+
+#endif
diff --git a/include/asm-arm/arch-msm/uncompress.h b/include/asm-arm/arch-msm/uncompress.h
new file mode 100644
index 00000000000..e91ed786ffe
--- /dev/null
+++ b/include/asm-arm/arch-msm/uncompress.h
@@ -0,0 +1,36 @@
+/* linux/include/asm-arm/arch-msm/uncompress.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include "hardware.h"
+
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/include/asm-arm/arch-msm/vmalloc.h b/include/asm-arm/arch-msm/vmalloc.h
new file mode 100644
index 00000000000..60f8d910e82
--- /dev/null
+++ b/include/asm-arm/arch-msm/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/include/asm-arm/arch-msm/vmalloc.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_VMALLOC_H
+#define __ASM_ARCH_MSM_VMALLOC_H
+
+#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+
+#endif
+
diff --git a/include/asm-arm/arch-s3c2410/debug-macro.S b/include/asm-arm/arch-s3c2410/debug-macro.S
index 9c8cd9abb82..89076c32272 100644
--- a/include/asm-arm/arch-s3c2410/debug-macro.S
+++ b/include/asm-arm/arch-s3c2410/debug-macro.S
@@ -92,11 +92,9 @@
#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
#define fifo_full fifo_full_s3c2410
#define fifo_level fifo_level_s3c2410
-#warning 2410only
#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
#define fifo_full fifo_full_s3c24xx
#define fifo_level fifo_level_s3c24xx
-#warning generic
#endif
/* include the reset of the code which will do the work */
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index c6e8d8f6493..4f291d9b7d9 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -214,6 +214,7 @@ struct s3c2410_dma_chan {
unsigned long dev_addr;
unsigned long load_timeout;
unsigned int flags; /* channel flags */
+ unsigned int hw_cfg; /* last hw config */
struct s3c24xx_dma_map *map; /* channel hw maps */
diff --git a/include/asm-arm/arch-s3c2410/hardware.h b/include/asm-arm/arch-s3c2410/hardware.h
index 6dadf58ff98..29592c3ebf2 100644
--- a/include/asm-arm/arch-s3c2410/hardware.h
+++ b/include/asm-arm/arch-s3c2410/hardware.h
@@ -50,6 +50,17 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
extern int s3c2410_gpio_getirq(unsigned int pin);
+/* s3c2410_gpio_irq2pin
+ *
+ * turn the given irq number into the corresponding GPIO number
+ *
+ * returns:
+ * < 0 = no pin
+ * >=0 = gpio pin number
+*/
+
+extern int s3c2410_gpio_irq2pin(unsigned int irq);
+
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_gpio_getirq(unsigned int pin);
@@ -87,6 +98,18 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ * < 0 => error code
+ * 0 => enabled
+ * 1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
@@ -99,6 +122,11 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
#endif /* CONFIG_CPU_S3C2440 */
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
+
+#endif /* CONFIG_CPU_S3C2412 */
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index 996f65488d2..d858b3eb554 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -160,4 +160,7 @@
#define NR_IRQS (IRQ_S3C2440_AC97+1)
#endif
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START IRQ_EINT0
+
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h
index e39656b7a08..dba9df9d871 100644
--- a/include/asm-arm/arch-s3c2410/regs-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-clock.h
@@ -138,6 +138,8 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
#define S3C2412_CLKDIVN_PDIVN (1<<2)
#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
#define S3C2421_CLKDIVN_ARMDIVN (1<<3)
+#define S3C2412_CLKDIVN_DVSEN (1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK (1<<5)
#define S3C2412_CLKDIVN_USB48DIV (1<<6)
#define S3C2412_CLKDIVN_UARTDIV_MASK (15<<8)
#define S3C2412_CLKDIVN_UARTDIV_SHIFT (8)
diff --git a/include/asm-arm/arch-s3c2410/regs-dsc.h b/include/asm-arm/arch-s3c2410/regs-dsc.h
index c0748511edb..1235df70f34 100644
--- a/include/asm-arm/arch-s3c2410/regs-dsc.h
+++ b/include/asm-arm/arch-s3c2410/regs-dsc.h
@@ -19,7 +19,7 @@
#define S3C2412_DSC1 S3C2410_GPIOREG(0xe0)
#endif
-#if defined(CONFIG_CPU_S3C2440)
+#if defined(CONFIG_CPU_S3C244X)
#define S3C2440_DSC0 S3C2410_GPIOREG(0xc4)
#define S3C2440_DSC1 S3C2410_GPIOREG(0xc8)
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index b693158b2d3..0ad75d716de 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -1133,12 +1133,16 @@
#define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C)
#define S3C2412_GPCSLPCON S3C2410_GPIOREG(0x2C)
#define S3C2412_GPDSLPCON S3C2410_GPIOREG(0x3C)
-#define S3C2412_GPESLPCON S3C2410_GPIOREG(0x4C)
#define S3C2412_GPFSLPCON S3C2410_GPIOREG(0x5C)
#define S3C2412_GPGSLPCON S3C2410_GPIOREG(0x6C)
#define S3C2412_GPHSLPCON S3C2410_GPIOREG(0x7C)
/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
#define S3C2412_SLPCON_LOW(x) ( 0x00 << ((x) * 2))
#define S3C2412_SLPCON_HIGH(x) ( 0x01 << ((x) * 2))
#define S3C2412_SLPCON_IN(x) ( 0x02 << ((x) * 2))
diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h
index e4d82341f7b..312ff93b63c 100644
--- a/include/asm-arm/arch-s3c2410/regs-mem.h
+++ b/include/asm-arm/arch-s3c2410/regs-mem.h
@@ -98,16 +98,19 @@
#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
+#define S3C2410_BANKCON_Tacp_SHIFT (2)
#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
+#define S3C2410_BANKCON_Tcah_SHIFT (4)
#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
+#define S3C2410_BANKCON_Tcoh_SHIFT (6)
#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
@@ -117,16 +120,19 @@
#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
+#define S3C2410_BANKCON_Tacc_SHIFT (8)
#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
+#define S3C2410_BANKCON_Tcos_SHIFT (11)
#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
+#define S3C2410_BANKCON_Tacs_SHIFT (13)
#define S3C2410_BANKCON_SRAM (0x0 << 15)
#define S3C2400_BANKCON_EDODRAM (0x2 << 15)
diff --git a/include/asm-arm/arch-s3c2410/regs-power.h b/include/asm-arm/arch-s3c2410/regs-power.h
index f79987be55e..13d13b7cfe9 100644
--- a/include/asm-arm/arch-s3c2410/regs-power.h
+++ b/include/asm-arm/arch-s3c2410/regs-power.h
@@ -23,7 +23,8 @@
#define S3C2412_INFORM2 S3C24XX_PWRREG(0x78)
#define S3C2412_INFORM3 S3C24XX_PWRREG(0x7C)
-#define S3C2412_PWRCFG_BATF_IGNORE (0<<0)
+#define S3C2412_PWRCFG_BATF_IRQ (1<<0)
+#define S3C2412_PWRCFG_BATF_IGNORE (2<<0)
#define S3C2412_PWRCFG_BATF_SLEEP (3<<0)
#define S3C2412_PWRCFG_BATF_MASK (3<<0)
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 63891786dfa..14de4e596f8 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -20,6 +20,9 @@
#include <asm/plat-s3c/regs-watchdog.h>
#include <asm/arch/regs-clock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
void (*s3c24xx_idle)(void);
void (*s3c24xx_reset_hook)(void);
@@ -59,6 +62,8 @@ static void arch_idle(void)
static void
arch_reset(char mode)
{
+ struct clk *wdtclk;
+
if (mode == 's') {
cpu_reset(0);
}
@@ -70,19 +75,28 @@ arch_reset(char mode)
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
+ wdtclk = clk_get(NULL, "watchdog");
+ if (!IS_ERR(wdtclk)) {
+ clk_enable(wdtclk);
+ } else
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
/* put initial values into count and data */
- __raw_writel(0x100, S3C2410_WTCNT);
- __raw_writel(0x100, S3C2410_WTDAT);
+ __raw_writel(0x80, S3C2410_WTCNT);
+ __raw_writel(0x80, S3C2410_WTDAT);
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
- mdelay(5000);
+ mdelay(500);
printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+
/* we'll take a jump through zero as a poor second */
cpu_reset(0);
}
diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h
index f31cda5a55e..392eb533232 100644
--- a/include/asm-arm/fpstate.h
+++ b/include/asm-arm/fpstate.h
@@ -17,14 +17,18 @@
/*
* VFP storage area has:
* - FPEXC, FPSCR, FPINST and FPINST2.
- * - 16 double precision data registers
- * - an implementation-dependant word of state for FLDMX/FSTMX
+ * - 16 or 32 double precision data registers
+ * - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
*
* FPEXC will always be non-zero once the VFP has been used in this process.
*/
struct vfp_hard_struct {
+#ifdef CONFIG_VFPv3
+ __u64 fpregs[32];
+#else
__u64 fpregs[16];
+#endif
#if __LINUX_ARM_ARCH__ < 6
__u32 fpmx_state;
#endif
@@ -35,6 +39,7 @@ struct vfp_hard_struct {
*/
__u32 fpinst;
__u32 fpinst2;
+
#ifdef CONFIG_SMP
__u32 cpu;
#endif
diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h
new file mode 100644
index 00000000000..4e7bd32288a
--- /dev/null
+++ b/include/asm-arm/kprobes.h
@@ -0,0 +1,79 @@
+/*
+ * include/asm-arm/kprobes.h
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ARM_KPROBES_H
+#define _ARM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define ARCH_SUPPORTS_KRETPROBES
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE 2
+#define MAX_STACK_SIZE 64 /* 32 would probably be OK */
+
+/*
+ * This undefined instruction must be unique and
+ * reserved solely for kprobes' use.
+ */
+#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8
+
+#define regs_return_value(regs) ((regs)->ARM_r0)
+#define flush_insn_slot(p) do { } while (0)
+#define kretprobe_blacklist_size 0
+
+typedef u32 kprobe_opcode_t;
+
+struct kprobe;
+typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
+
+/* Architecture specific copy of original instruction. */
+struct arch_specific_insn {
+ kprobe_opcode_t *insn;
+ kprobe_insn_handler_t *insn_handler;
+};
+
+struct prev_kprobe {
+ struct kprobe *kp;
+ unsigned int status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+ unsigned int kprobe_status;
+ struct prev_kprobe prev_kprobe;
+ struct pt_regs jprobe_saved_regs;
+ char jprobes_stack[MAX_STACK_SIZE];
+};
+
+void arch_remove_kprobe(struct kprobe *);
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+
+enum kprobe_insn {
+ INSN_REJECTED,
+ INSN_GOOD,
+ INSN_GOOD_NO_SLOT
+};
+
+enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
+ struct arch_specific_insn *);
+void __init arm_kprobe_decode_init(void);
+
+#endif /* _ARM_KPROBES_H */
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
index 2c59406435e..c78efe316fc 100644
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -32,6 +32,7 @@ struct s3c24xx_dma_map {
struct s3c24xx_dma_addr hw_addr;
unsigned long channels[S3C2410_DMA_CHANNELS];
+ unsigned long channels_rx[S3C2410_DMA_CHANNELS];
};
struct s3c24xx_dma_selection {
@@ -41,6 +42,10 @@ struct s3c24xx_dma_selection {
void (*select)(struct s3c2410_dma_chan *chan,
struct s3c24xx_dma_map *map);
+
+ void (*direction)(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map,
+ enum s3c2410_dmasrc dir);
};
extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h
index 8af6d9579b3..45746a99534 100644
--- a/include/asm-arm/plat-s3c24xx/irq.h
+++ b/include/asm-arm/plat-s3c24xx/irq.h
@@ -15,7 +15,9 @@
#define EXTINT_OFF (IRQ_EINT4 - 4)
+/* these are exported for arch/arm/mach-* usage */
extern struct irq_chip s3c_irq_level_chip;
+extern struct irq_chip s3c_irq_chip;
static inline void
s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
diff --git a/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h b/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
new file mode 100644
index 00000000000..25d4058bcfe
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
@@ -0,0 +1,72 @@
+/* linux/include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h
+ *
+ * Copyright 2007 Simtec Electronics <linux@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 IIS register definition
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_IIS_H
+#define __ASM_ARCH_REGS_S3C2412_IIS_H
+
+#define S3C2412_IISCON (0x00)
+#define S3C2412_IISMOD (0x04)
+#define S3C2412_IISFIC (0x08)
+#define S3C2412_IISPSR (0x0C)
+#define S3C2412_IISTXD (0x10)
+#define S3C2412_IISRXD (0x14)
+
+#define S3C2412_IISCON_LRINDEX (1 << 11)
+#define S3C2412_IISCON_TXFIFO_EMPTY (1 << 10)
+#define S3C2412_IISCON_RXFIFO_EMPTY (1 << 9)
+#define S3C2412_IISCON_TXFIFO_FULL (1 << 8)
+#define S3C2412_IISCON_RXFIFO_FULL (1 << 7)
+#define S3C2412_IISCON_TXDMA_PAUSE (1 << 6)
+#define S3C2412_IISCON_RXDMA_PAUSE (1 << 5)
+#define S3C2412_IISCON_TXCH_PAUSE (1 << 4)
+#define S3C2412_IISCON_RXCH_PAUSE (1 << 3)
+#define S3C2412_IISCON_TXDMA_ACTIVE (1 << 2)
+#define S3C2412_IISCON_RXDMA_ACTIVE (1 << 1)
+#define S3C2412_IISCON_IIS_ACTIVE (1 << 0)
+
+#define S3C2412_IISMOD_MASTER_INTERNAL (0 << 10)
+#define S3C2412_IISMOD_MASTER_EXTERNAL (1 << 10)
+#define S3C2412_IISMOD_SLAVE (2 << 10)
+#define S3C2412_IISMOD_MASTER_MASK (3 << 10)
+#define S3C2412_IISMOD_MODE_TXONLY (0 << 8)
+#define S3C2412_IISMOD_MODE_RXONLY (1 << 8)
+#define S3C2412_IISMOD_MODE_TXRX (2 << 8)
+#define S3C2412_IISMOD_MODE_MASK (3 << 8)
+#define S3C2412_IISMOD_LR_LLOW (0 << 7)
+#define S3C2412_IISMOD_LR_RLOW (1 << 7)
+#define S3C2412_IISMOD_SDF_IIS (0 << 5)
+#define S3C2412_IISMOD_SDF_MSB (0 << 5)
+#define S3C2412_IISMOD_SDF_LSB (0 << 5)
+#define S3C2412_IISMOD_SDF_MASK (3 << 5)
+#define S3C2412_IISMOD_RCLK_256FS (0 << 3)
+#define S3C2412_IISMOD_RCLK_512FS (1 << 3)
+#define S3C2412_IISMOD_RCLK_384FS (2 << 3)
+#define S3C2412_IISMOD_RCLK_768FS (3 << 3)
+#define S3C2412_IISMOD_RCLK_MASK (3 << 3)
+#define S3C2412_IISMOD_BCLK_32FS (0 << 1)
+#define S3C2412_IISMOD_BCLK_48FS (1 << 1)
+#define S3C2412_IISMOD_BCLK_16FS (2 << 1)
+#define S3C2412_IISMOD_BCLK_24FS (3 << 1)
+#define S3C2412_IISMOD_BCLK_MASK (3 << 1)
+#define S3C2412_IISMOD_8BIT (1 << 0)
+
+#define S3C2412_IISPSR_PSREN (1 << 15)
+
+#define S3C2412_IISFIC_TXFLUSH (1 << 15)
+#define S3C2412_IISFIC_RXFLUSH (1 << 7)
+#define S3C2412_IISFIC_TXCOUNT(x) (((x) >> 8) & 0xf)
+#define S3C2412_IISFIC_RXCOUNT(x) (((x) >> 0) & 0xf)
+
+
+
+#endif /* __ASM_ARCH_REGS_S3C2412_IIS_H */
+
diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/include/asm-arm/plat-s3c24xx/regs-spi.h
index 4a499a13825..ea565b007d0 100644
--- a/include/asm-arm/plat-s3c24xx/regs-spi.h
+++ b/include/asm-arm/plat-s3c24xx/regs-spi.h
@@ -17,6 +17,21 @@
#define S3C2410_SPCON (0x00)
+#define S3C2412_SPCON_RXFIFO_RB2 (0<<14)
+#define S3C2412_SPCON_RXFIFO_RB4 (1<<14)
+#define S3C2412_SPCON_RXFIFO_RB12 (2<<14)
+#define S3C2412_SPCON_RXFIFO_RB14 (3<<14)
+#define S3C2412_SPCON_TXFIFO_RB2 (0<<12)
+#define S3C2412_SPCON_TXFIFO_RB4 (1<<12)
+#define S3C2412_SPCON_TXFIFO_RB12 (2<<12)
+#define S3C2412_SPCON_TXFIFO_RB14 (3<<12)
+#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */
+#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */
+#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */
+#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */
+
+#define S3C2412_SPCON_DIRC_RX (1<<7)
+
#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */
#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */
#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */
@@ -34,10 +49,19 @@
#define S3C2410_SPSTA (0x04)
+#define S3C2412_SPSTA_RXFIFO_AE (1<<11)
+#define S3C2412_SPSTA_TXFIFO_AE (1<<10)
+#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9)
+#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8)
+#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7)
+#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6)
+#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5)
+#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4)
+
#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */
#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */
#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */
-
+#define S3C2412_SPSTA_READY_ORG (1<<3)
#define S3C2410_SPPIN (0x08)
@@ -46,9 +70,13 @@
#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */
#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */
-
#define S3C2410_SPPRE (0x0C)
#define S3C2410_SPTDAT (0x10)
#define S3C2410_SPRDAT (0x14)
+#define S3C2412_TXFIFO (0x18)
+#define S3C2412_RXFIFO (0x18)
+#define S3C2412_SPFIC (0x24)
+
+
#endif /* __ASM_ARCH_REGS_SPI_H */
diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h
index d4f34dc83eb..f1541afcf85 100644
--- a/include/asm-arm/traps.h
+++ b/include/asm-arm/traps.h
@@ -15,4 +15,13 @@ struct undef_hook {
void register_undef_hook(struct undef_hook *hook);
void unregister_undef_hook(struct undef_hook *hook);
+static inline int in_exception_text(unsigned long ptr)
+{
+ extern char __exception_text_start[];
+ extern char __exception_text_end[];
+
+ return ptr >= (unsigned long)&__exception_text_start &&
+ ptr < (unsigned long)&__exception_text_end;
+}
+
#endif
diff --git a/include/asm-arm/vfp.h b/include/asm-arm/vfp.h
index bd6be9d7f77..5f9a2cb3d45 100644
--- a/include/asm-arm/vfp.h
+++ b/include/asm-arm/vfp.h
@@ -7,7 +7,11 @@
#define FPSID cr0
#define FPSCR cr1
+#define MVFR1 cr6
+#define MVFR0 cr7
#define FPEXC cr8
+#define FPINST cr9
+#define FPINST2 cr10
/* FPSID bits */
#define FPSID_IMPLEMENTER_BIT (24)
@@ -28,6 +32,19 @@
/* FPEXC bits */
#define FPEXC_EX (1 << 31)
#define FPEXC_EN (1 << 30)
+#define FPEXC_DEX (1 << 29)
+#define FPEXC_FP2V (1 << 28)
+#define FPEXC_VV (1 << 27)
+#define FPEXC_TFV (1 << 26)
+#define FPEXC_LENGTH_BIT (8)
+#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT)
+#define FPEXC_IDF (1 << 7)
+#define FPEXC_IXF (1 << 4)
+#define FPEXC_UFF (1 << 3)
+#define FPEXC_OFF (1 << 2)
+#define FPEXC_DZF (1 << 1)
+#define FPEXC_IOF (1 << 0)
+#define FPEXC_TRAP_MASK (FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF)
/* FPSCR bits */
#define FPSCR_DEFAULT_NAN (1<<25)
@@ -55,20 +72,9 @@
#define FPSCR_IXC (1<<4)
#define FPSCR_IDC (1<<7)
-/*
- * VFP9-S specific.
- */
-#define FPINST cr9
-#define FPINST2 cr10
-
-/* FPEXC bits */
-#define FPEXC_FPV2 (1<<28)
-#define FPEXC_LENGTH_BIT (8)
-#define FPEXC_LENGTH_MASK (7 << FPEXC_LENGTH_BIT)
-#define FPEXC_INV (1 << 7)
-#define FPEXC_UFC (1 << 3)
-#define FPEXC_OFC (1 << 2)
-#define FPEXC_IOC (1 << 0)
+/* MVFR0 bits */
+#define MVFR0_A_SIMD_BIT (0)
+#define MVFR0_A_SIMD_MASK (0xf << MVFR0_A_SIMD_BIT)
/* Bit patterns for decoding the packaged operation descriptors */
#define VFPOPDESC_LENGTH_BIT (9)
diff --git a/include/asm-arm/vfpmacros.h b/include/asm-arm/vfpmacros.h
index 27fe028b4e7..cccb3892e73 100644
--- a/include/asm-arm/vfpmacros.h
+++ b/include/asm-arm/vfpmacros.h
@@ -15,19 +15,33 @@
.endm
@ read all the working registers back into the VFP
- .macro VFPFLDMIA, base
+ .macro VFPFLDMIA, base, tmp
#if __LINUX_ARM_ARCH__ < 6
LDC p11, cr0, [\base],#33*4 @ FLDMIAX \base!, {d0-d15}
#else
LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15}
#endif
+#ifdef CONFIG_VFPv3
+ VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
+ and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
+ cmp \tmp, #2 @ 32 x 64bit registers?
+ ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
+ addne \base, \base, #32*4 @ step over unused register space
+#endif
.endm
@ write all the working registers out of the VFP
- .macro VFPFSTMIA, base
+ .macro VFPFSTMIA, base, tmp
#if __LINUX_ARM_ARCH__ < 6
STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15}
#else
STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15}
#endif
+#ifdef CONFIG_VFPv3
+ VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
+ and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
+ cmp \tmp, #2 @ 32 x 64bit registers?
+ stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
+ addne \base, \base, #32*4 @ step over unused register space
+#endif
.endm
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
index 0dc20261c1e..44d0bfa1f40 100644
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ b/include/asm-avr32/arch-at32ap/cpu.h
@@ -30,5 +30,6 @@
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
+#define cpu_is_at91cap9() (0)
#endif /* __ASM_ARCH_CPU_H */
diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c
index b48c72923a1..88490418f93 100644
--- a/sound/oss/waveartist.c
+++ b/sound/oss/waveartist.c
@@ -835,7 +835,7 @@ static struct audio_driver waveartist_audio_driver = {
static irqreturn_t
waveartist_intr(int irq, void *dev_id)
{
- wavnc_info *devc = (wavnc_info *)dev_id;
+ wavnc_info *devc = dev_id;
int irqstatus, status;
spin_lock(&waveartist_lock);