diff options
| -rw-r--r-- | drivers/net/e100.c | 93 |
1 files changed, 77 insertions, 16 deletions
diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 861d2eeaa43..0504db9ad64 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -167,7 +167,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k6"DRV_EXT +#define DRV_VERSION "3.5.24-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -240,6 +240,7 @@ static struct pci_device_id e100_id_table[] = { INTEL_8255X_ETHERNET_DEVICE(0x1093, 7), INTEL_8255X_ETHERNET_DEVICE(0x1094, 7), INTEL_8255X_ETHERNET_DEVICE(0x1095, 7), + INTEL_8255X_ETHERNET_DEVICE(0x10fe, 7), INTEL_8255X_ETHERNET_DEVICE(0x1209, 0), INTEL_8255X_ETHERNET_DEVICE(0x1229, 0), INTEL_8255X_ETHERNET_DEVICE(0x2449, 2), @@ -275,6 +276,7 @@ enum phy { phy_82562_em = 0x032002A8, phy_82562_ek = 0x031002A8, phy_82562_eh = 0x017002A8, + phy_82552_v = 0xd061004d, phy_unknown = 0xFFFFFFFF, }; @@ -943,6 +945,22 @@ static int mdio_read(struct net_device *netdev, int addr, int reg) static void mdio_write(struct net_device *netdev, int addr, int reg, int data) { + struct nic *nic = netdev_priv(netdev); + + if ((nic->phy == phy_82552_v) && (reg == MII_BMCR) && + (data & (BMCR_ANRESTART | BMCR_ANENABLE))) { + u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE); + + /* + * Workaround Si issue where sometimes the part will not + * autoneg to 100Mbps even when advertised. + */ + if (advert & ADVERTISE_100FULL) + data |= BMCR_SPEED100 | BMCR_FULLDPLX; + else if (advert & ADVERTISE_100HALF) + data |= BMCR_SPEED100; + } + mdio_ctrl(netdev_priv(netdev), addr, mdi_write, reg, data); } @@ -1276,16 +1294,12 @@ static int e100_phy_init(struct nic *nic) if (addr == 32) return -EAGAIN; - /* Selected the phy and isolate the rest */ - for (addr = 0; addr < 32; addr++) { - if (addr != nic->mii.phy_id) { - mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); - } else { - bmcr = mdio_read(netdev, addr, MII_BMCR); - mdio_write(netdev, addr, MII_BMCR, - bmcr & ~BMCR_ISOLATE); - } - } + /* Isolate all the PHY ids */ + for (addr = 0; addr < 32; addr++) + mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); + /* Select the discovered PHY */ + bmcr &= ~BMCR_ISOLATE; + mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); /* Get phy ID */ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); @@ -1303,7 +1317,18 @@ static int e100_phy_init(struct nic *nic) mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong); } - if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && + if (nic->phy == phy_82552_v) { + u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE); + + /* Workaround Si not advertising flow-control during autoneg */ + advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert); + + /* Reset for the above changes to take effect */ + bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR); + bmcr |= BMCR_RESET; + mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); + } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) && (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) && !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) { /* enable/disable MDI/MDI-X auto-switching. */ @@ -2134,6 +2159,9 @@ err_clean_rx: } #define MII_LED_CONTROL 0x1B +#define E100_82552_LED_OVERRIDE 0x19 +#define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */ +#define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */ static void e100_blink_led(unsigned long data) { struct nic *nic = (struct nic *)data; @@ -2143,10 +2171,19 @@ static void e100_blink_led(unsigned long data) led_on_559 = 0x05, led_on_557 = 0x07, }; + u16 led_reg = MII_LED_CONTROL; + + if (nic->phy == phy_82552_v) { + led_reg = E100_82552_LED_OVERRIDE; - nic->leds = (nic->leds & led_on) ? led_off : - (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559; - mdio_write(nic->netdev, nic->mii.phy_id, MII_LED_CONTROL, nic->leds); + nic->leds = (nic->leds == E100_82552_LED_ON) ? + E100_82552_LED_OFF : E100_82552_LED_ON; + } else { + nic->leds = (nic->leds & led_on) ? led_off : + (nic->mac < mac_82559_D101M) ? led_on_557 : + led_on_559; + } + mdio_write(nic->netdev, nic->mii.phy_id, led_reg, nic->leds); mod_timer(&nic->blink_timer, jiffies + HZ / 4); } @@ -2375,13 +2412,15 @@ static void e100_diag_test(struct net_device *netdev, static int e100_phys_id(struct net_device *netdev, u32 data) { struct nic *nic = netdev_priv(netdev); + u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE : + MII_LED_CONTROL; if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); mod_timer(&nic->blink_timer, jiffies); msleep_interruptible(data * 1000); del_timer_sync(&nic->blink_timer); - mdio_write(netdev, nic->mii.phy_id, MII_LED_CONTROL, 0); + mdio_write(netdev, nic->mii.phy_id, led_reg, 0); return 0; } @@ -2686,6 +2725,9 @@ static void __devexit e100_remove(struct pci_dev *pdev) } } +#define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */ +#define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */ +#define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */ static int e100_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *netdev = pci_get_drvdata(pdev); @@ -2698,6 +2740,15 @@ static int e100_suspend(struct pci_dev *pdev, pm_message_t state) pci_save_state(pdev); if ((nic->flags & wol_magic) | e100_asf(nic)) { + /* enable reverse auto-negotiation */ + if (nic->phy == phy_82552_v) { + u16 smartspeed = mdio_read(netdev, nic->mii.phy_id, + E100_82552_SMARTSPEED); + + mdio_write(netdev, nic->mii.phy_id, + E100_82552_SMARTSPEED, smartspeed | + E100_82552_REV_ANEG | E100_82552_ANEG_NOW); + } if (pci_enable_wake(pdev, PCI_D3cold, true)) pci_enable_wake(pdev, PCI_D3hot, true); } else { @@ -2721,6 +2772,16 @@ static int e100_resume(struct pci_dev *pdev) /* ack any pending wake events, disable PME */ pci_enable_wake(pdev, 0, 0); + /* disbale reverse auto-negotiation */ + if (nic->phy == phy_82552_v) { + u16 smartspeed = mdio_read(netdev, nic->mii.phy_id, + E100_82552_SMARTSPEED); + + mdio_write(netdev, nic->mii.phy_id, + E100_82552_SMARTSPEED, + smartspeed & ~(E100_82552_REV_ANEG)); + } + netif_device_attach(netdev); if (netif_running(netdev)) e100_up(nic); |