Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1268 insertions, 0 deletions

diff --git a/lib/zlib_deflate/deflate.c b/lib/zlib_deflate/deflate.c
new file mode 100644
index 00000000000..ad9a1bf4fc6
--- /dev/null
+++ b/lib/zlib_deflate/deflate.c
@@ -0,0 +1,1268 @@
+/* +++ deflate.c */
+/* deflate.c -- compress data using the deflation algorithm
+ * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/*
+ *  ALGORITHM
+ *
+ *      The "deflation" process depends on being able to identify portions
+ *      of the input text which are identical to earlier input (within a
+ *      sliding window trailing behind the input currently being processed).
+ *
+ *      The most straightforward technique turns out to be the fastest for
+ *      most input files: try all possible matches and select the longest.
+ *      The key feature of this algorithm is that insertions into the string
+ *      dictionary are very simple and thus fast, and deletions are avoided
+ *      completely. Insertions are performed at each input character, whereas
+ *      string matches are performed only when the previous match ends. So it
+ *      is preferable to spend more time in matches to allow very fast string
+ *      insertions and avoid deletions. The matching algorithm for small
+ *      strings is inspired from that of Rabin & Karp. A brute force approach
+ *      is used to find longer strings when a small match has been found.
+ *      A similar algorithm is used in comic (by Jan-Mark Wams) and freeze
+ *      (by Leonid Broukhis).
+ *         A previous version of this file used a more sophisticated algorithm
+ *      (by Fiala and Greene) which is guaranteed to run in linear amortized
+ *      time, but has a larger average cost, uses more memory and is patented.
+ *      However the F&G algorithm may be faster for some highly redundant
+ *      files if the parameter max_chain_length (described below) is too large.
+ *
+ *  ACKNOWLEDGEMENTS
+ *
+ *      The idea of lazy evaluation of matches is due to Jan-Mark Wams, and
+ *      I found it in 'freeze' written by Leonid Broukhis.
+ *      Thanks to many people for bug reports and testing.
+ *
+ *  REFERENCES
+ *
+ *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ *      Available in ftp://ds.internic.net/rfc/rfc1951.txt
+ *
+ *      A description of the Rabin and Karp algorithm is given in the book
+ *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
+ *
+ *      Fiala,E.R., and Greene,D.H.
+ *         Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/zutil.h>
+#include "defutil.h"
+
+
+/* ===========================================================================
+ *  Function prototypes.
+ */
+typedef enum {
+    need_more,      /* block not completed, need more input or more output */
+    block_done,     /* block flush performed */
+    finish_started, /* finish started, need only more output at next deflate */
+    finish_done     /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) (deflate_state *s, int flush);
+/* Compression function. Returns the block state after the call. */
+
+static void fill_window    (deflate_state *s);
+static block_state deflate_stored (deflate_state *s, int flush);
+static block_state deflate_fast   (deflate_state *s, int flush);
+static block_state deflate_slow   (deflate_state *s, int flush);
+static void lm_init        (deflate_state *s);
+static void putShortMSB    (deflate_state *s, uInt b);
+static void flush_pending  (z_streamp strm);
+static int read_buf        (z_streamp strm, Byte *buf, unsigned size);
+static uInt longest_match  (deflate_state *s, IPos cur_match);
+
+#ifdef DEBUG_ZLIB
+static  void check_match (deflate_state *s, IPos start, IPos match,
+                         int length);
+#endif
+
+/* ===========================================================================
+ * Local data
+ */
+
+#define NIL 0
+/* Tail of hash chains */
+
+#ifndef TOO_FAR
+#  define TOO_FAR 4096
+#endif
+/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
+
+#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
+/* Minimum amount of lookahead, except at the end of the input file.
+ * See deflate.c for comments about the MIN_MATCH+1.
+ */
+
+/* Values for max_lazy_match, good_match and max_chain_length, depending on
+ * the desired pack level (0..9). The values given below have been tuned to
+ * exclude worst case performance for pathological files. Better values may be
+ * found for specific files.
+ */
+typedef struct config_s {
+   ush good_length; /* reduce lazy search above this match length */
+   ush max_lazy;    /* do not perform lazy search above this match length */
+   ush nice_length; /* quit search above this match length */
+   ush max_chain;
+   compress_func func;
+} config;
+
+static const config configuration_table[10] = {
+/*      good lazy nice chain */
+/* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
+/* 1 */ {4,    4,  8,    4, deflate_fast}, /* maximum speed, no lazy matches */
+/* 2 */ {4,    5, 16,    8, deflate_fast},
+/* 3 */ {4,    6, 32,   32, deflate_fast},
+
+/* 4 */ {4,    4, 16,   16, deflate_slow},  /* lazy matches */
+/* 5 */ {8,   16, 32,   32, deflate_slow},
+/* 6 */ {8,   16, 128, 128, deflate_slow},
+/* 7 */ {8,   32, 128, 256, deflate_slow},
+/* 8 */ {32, 128, 258, 1024, deflate_slow},
+/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* maximum compression */
+
+/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4
+ * For deflate_fast() (levels <= 3) good is ignored and lazy has a different
+ * meaning.
+ */
+
+#define EQUAL 0
+/* result of memcmp for equal strings */
+
+/* ===========================================================================
+ * Update a hash value with the given input byte
+ * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
+ *    input characters, so that a running hash key can be computed from the
+ *    previous key instead of complete recalculation each time.
+ */
+#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask)
+
+
+/* ===========================================================================
+ * Insert string str in the dictionary and set match_head to the previous head
+ * of the hash chain (the most recent string with same hash key). Return
+ * the previous length of the hash chain.
+ * IN  assertion: all calls to to INSERT_STRING are made with consecutive
+ *    input characters and the first MIN_MATCH bytes of str are valid
+ *    (except for the last MIN_MATCH-1 bytes of the input file).
+ */
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+
+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+    s->head[s->hash_size-1] = NIL; \
+    memset((char *)s->head, 0, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
+/* ========================================================================= */
+int zlib_deflateInit_(
+	z_streamp strm,
+	int level,
+	const char *version,
+	int stream_size
+)
+{
+    return zlib_deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS,
+			      DEF_MEM_LEVEL,
+			      Z_DEFAULT_STRATEGY, version, stream_size);
+    /* To do: ignore strm->next_in if we use it as window */
+}
+
+/* ========================================================================= */
+int zlib_deflateInit2_(
+	z_streamp strm,
+	int  level,
+	int  method,
+	int  windowBits,
+	int  memLevel,
+	int  strategy,
+	const char *version,
+	int stream_size
+)
+{
+    deflate_state *s;
+    int noheader = 0;
+    static char* my_version = ZLIB_VERSION;
+    deflate_workspace *mem;
+
+    ush *overlay;
+    /* We overlay pending_buf and d_buf+l_buf. This works since the average
+     * output size for (length,distance) codes is <= 24 bits.
+     */
+
+    if (version == NULL || version[0] != my_version[0] ||
+        stream_size != sizeof(z_stream)) {
+	return Z_VERSION_ERROR;
+    }
+    if (strm == NULL) return Z_STREAM_ERROR;
+
+    strm->msg = NULL;
+
+    if (level == Z_DEFAULT_COMPRESSION) level = 6;
+
+    mem = (deflate_workspace *) strm->workspace;
+
+    if (windowBits < 0) { /* undocumented feature: suppress zlib header */
+        noheader = 1;
+        windowBits = -windowBits;
+    }
+    if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
+        windowBits < 9 || windowBits > 15 || level < 0 || level > 9 ||
+	strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
+        return Z_STREAM_ERROR;
+    }
+    s = (deflate_state *) &(mem->deflate_memory);
+    strm->state = (struct internal_state *)s;
+    s->strm = strm;
+
+    s->noheader = noheader;
+    s->w_bits = windowBits;
+    s->w_size = 1 << s->w_bits;
+    s->w_mask = s->w_size - 1;
+
+    s->hash_bits = memLevel + 7;
+    s->hash_size = 1 << s->hash_bits;
+    s->hash_mask = s->hash_size - 1;
+    s->hash_shift =  ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH);
+
+    s->window = (Byte *) mem->window_memory;
+    s->prev   = (Pos *)  mem->prev_memory;
+    s->head   = (Pos *)  mem->head_memory;
+
+    s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
+
+    overlay = (ush *) mem->overlay_memory;
+    s->pending_buf = (uch *) overlay;
+    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
+
+    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
+
+    s->level = level;
+    s->strategy = strategy;
+    s->method = (Byte)method;
+
+    return zlib_deflateReset(strm);
+}
+
+/* ========================================================================= */
+int zlib_deflateSetDictionary(
+	z_streamp strm,
+	const Byte *dictionary,
+	uInt  dictLength
+)
+{
+    deflate_state *s;
+    uInt length = dictLength;
+    uInt n;
+    IPos hash_head = 0;
+
+    if (strm == NULL || strm->state == NULL || dictionary == NULL)
+	return Z_STREAM_ERROR;
+
+    s = (deflate_state *) strm->state;
+    if (s->status != INIT_STATE) return Z_STREAM_ERROR;
+
+    strm->adler = zlib_adler32(strm->adler, dictionary, dictLength);
+
+    if (length < MIN_MATCH) return Z_OK;
+    if (length > MAX_DIST(s)) {
+	length = MAX_DIST(s);
+#ifndef USE_DICT_HEAD
+	dictionary += dictLength - length; /* use the tail of the dictionary */
+#endif
+    }
+    memcpy((char *)s->window, dictionary, length);
+    s->strstart = length;
+    s->block_start = (long)length;
+
+    /* Insert all strings in the hash table (except for the last two bytes).
+     * s->lookahead stays null, so s->ins_h will be recomputed at the next
+     * call of fill_window.
+     */
+    s->ins_h = s->window[0];
+    UPDATE_HASH(s, s->ins_h, s->window[1]);
+    for (n = 0; n <= length - MIN_MATCH; n++) {
+	INSERT_STRING(s, n, hash_head);
+    }
+    if (hash_head) hash_head = 0;  /* to make compiler happy */
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int zlib_deflateReset(
+	z_streamp strm
+)
+{
+    deflate_state *s;
+    
+    if (strm == NULL || strm->state == NULL)
+        return Z_STREAM_ERROR;
+
+    strm->total_in = strm->total_out = 0;
+    strm->msg = NULL;
+    strm->data_type = Z_UNKNOWN;
+
+    s = (deflate_state *)strm->state;
+    s->pending = 0;
+    s->pending_out = s->pending_buf;
+
+    if (s->noheader < 0) {
+        s->noheader = 0; /* was set to -1 by deflate(..., Z_FINISH); */
+    }
+    s->status = s->noheader ? BUSY_STATE : INIT_STATE;
+    strm->adler = 1;
+    s->last_flush = Z_NO_FLUSH;
+
+    zlib_tr_init(s);
+    lm_init(s);
+
+    return Z_OK;
+}
+
+/* ========================================================================= */
+int zlib_deflateParams(
+	z_streamp strm,
+	int level,
+	int strategy
+)
+{
+    deflate_state *s;
+    compress_func func;
+    int err = Z_OK;
+
+    if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+    s = (deflate_state *) strm->state;
+
+    if (level == Z_DEFAULT_COMPRESSION) {
+	level = 6;
+    }
+    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
+	return Z_STREAM_ERROR;
+    }
+    func = configuration_table[s->level].func;
+
+    if (func != configuration_table[level].func && strm->total_in != 0) {
+	/* Flush the last buffer: */
+	err = zlib_deflate(strm, Z_PARTIAL_FLUSH);
+    }
+    if (s->level != level) {
+	s->level = level;
+	s->max_lazy_match   = configuration_table[level].max_lazy;
+	s->good_match       = configuration_table[level].good_length;
+	s->nice_match       = configuration_table[level].nice_length;
+	s->max_chain_length = configuration_table[level].max_chain;
+    }
+    s->strategy = strategy;
+    return err;
+}
+
+/* =========================================================================
+ * Put a short in the pending buffer. The 16-bit value is put in MSB order.
+ * IN assertion: the stream state is correct and there is enough room in
+ * pending_buf.
+ */
+static void putShortMSB(
+	deflate_state *s,
+	uInt b
+)
+{
+    put_byte(s, (Byte)(b >> 8));
+    put_byte(s, (Byte)(b & 0xff));
+}   
+
+/* =========================================================================
+ * Flush as much pending output as possible. All deflate() output goes
+ * through this function so some applications may wish to modify it
+ * to avoid allocating a large strm->next_out buffer and copying into it.
+ * (See also read_buf()).
+ */
+static void flush_pending(
+	z_streamp strm
+)
+{
+    deflate_state *s = (deflate_state *) strm->state;
+    unsigned len = s->pending;
+
+    if (len > strm->avail_out) len = strm->avail_out;
+    if (len == 0) return;
+
+    if (strm->next_out != NULL) {
+	memcpy(strm->next_out, s->pending_out, len);
+	strm->next_out += len;
+    }
+    s->pending_out += len;
+    strm->total_out += len;
+    strm->avail_out  -= len;
+    s->pending -= len;
+    if (s->pending == 0) {
+        s->pending_out = s->pending_buf;
+    }
+}
+
+/* ========================================================================= */
+int zlib_deflate(
+	z_streamp strm,
+	int flush
+)
+{
+    int old_flush; /* value of flush param for previous deflate call */
+    deflate_state *s;
+
+    if (strm == NULL || strm->state == NULL ||
+	flush > Z_FINISH || flush < 0) {
+        return Z_STREAM_ERROR;
+    }
+    s = (deflate_state *) strm->state;
+
+    if ((strm->next_in == NULL && strm->avail_in != 0) ||
+	(s->status == FINISH_STATE && flush != Z_FINISH)) {
+        return Z_STREAM_ERROR;
+    }
+    if (strm->avail_out == 0) return Z_BUF_ERROR;
+
+    s->strm = strm; /* just in case */
+    old_flush = s->last_flush;
+    s->last_flush = flush;
+
+    /* Write the zlib header */
+    if (s->status == INIT_STATE) {
+
+        uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8;
+        uInt level_flags = (s->level-1) >> 1;
+
+        if (level_flags > 3) level_flags = 3;
+        header |= (level_flags << 6);
+	if (s->strstart != 0) header |= PRESET_DICT;
+        header += 31 - (header % 31);
+
+        s->status = BUSY_STATE;
+        putShortMSB(s, header);
+
+	/* Save the adler32 of the preset dictionary: */
+	if (s->strstart != 0) {
+	    putShortMSB(s, (uInt)(strm->adler >> 16));
+	    putShortMSB(s, (uInt)(strm->adler & 0xffff));
+	}
+	strm->adler = 1L;
+    }
+
+    /* Flush as much pending output as possible */
+    if (s->pending != 0) {
+        flush_pending(strm);
+        if (strm->avail_out == 0) {
+	    /* Since avail_out is 0, deflate will be called again with
+	     * more output space, but possibly with both pending and
+	     * avail_in equal to zero. There won't be anything to do,
+	     * but this is not an error situation so make sure we
+	     * return OK instead of BUF_ERROR at next call of deflate:
+             */
+	    s->last_flush = -1;
+	    return Z_OK;
+	}
+
+    /* Make sure there is something to do and avoid duplicate consecutive
+     * flushes. For repeated and useless calls with Z_FINISH, we keep
+     * returning Z_STREAM_END instead of Z_BUFF_ERROR.
+     */
+    } else if (strm->avail_in == 0 && flush <= old_flush &&
+	       flush != Z_FINISH) {
+        return Z_BUF_ERROR;
+    }
+
+    /* User must not provide more input after the first FINISH: */
+    if (s->status == FINISH_STATE && strm->avail_in != 0) {
+        return Z_BUF_ERROR;
+    }
+
+    /* Start a new block or continue the current one.
+     */
+    if (strm->avail_in != 0 || s->lookahead != 0 ||
+        (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
+        block_state bstate;
+
+	bstate = (*(configuration_table[s->level].func))(s, flush);
+
+        if (bstate == finish_started || bstate == finish_done) {
+            s->status = FINISH_STATE;
+        }
+        if (bstate == need_more || bstate == finish_started) {
+	    if (strm->avail_out == 0) {
+	        s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+	    }
+	    return Z_OK;
+	    /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+	     * of deflate should use the same flush parameter to make sure
+	     * that the flush is complete. So we don't have to output an
+	     * empty block here, this will be done at next call. This also
+	     * ensures that for a very small output buffer, we emit at most
+	     * one empty block.
+	     */
+	}
+        if (bstate == block_done) {
+            if (flush == Z_PARTIAL_FLUSH) {
+                zlib_tr_align(s);
+	    } else if (flush == Z_PACKET_FLUSH) {
+		/* Output just the 3-bit `stored' block type value,
+		   but not a zero length. */
+		zlib_tr_stored_type_only(s);
+            } else { /* FULL_FLUSH or SYNC_FLUSH */
+                zlib_tr_stored_block(s, (char*)0, 0L, 0);
+                /* For a full flush, this empty block will be recognized
+                 * as a special marker by inflate_sync().
+                 */
+                if (flush == Z_FULL_FLUSH) {
+                    CLEAR_HASH(s);             /* forget history */
+                }
+            }
+            flush_pending(strm);
+	    if (strm->avail_out == 0) {
+	      s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+	      return Z_OK;
+	    }
+        }
+    }
+    Assert(strm->avail_out > 0, "bug2");
+
+    if (flush != Z_FINISH) return Z_OK;
+    if (s->noheader) return Z_STREAM_END;
+
+    /* Write the zlib trailer (adler32) */
+    putShortMSB(s, (uInt)(strm->adler >> 16));
+    putShortMSB(s, (uInt)(strm->adler & 0xffff));
+    flush_pending(strm);
+    /* If avail_out is zero, the application will call deflate again
+     * to flush the rest.
+     */
+    s->noheader = -1; /* write the trailer only once! */
+    return s->pending != 0 ? Z_OK : Z_STREAM_END;
+}
+
+/* ========================================================================= */
+int zlib_deflateEnd(
+	z_streamp strm
+)
+{
+    int status;
+    deflate_state *s;
+
+    if (strm == NULL || strm->state == NULL) return Z_STREAM_ERROR;
+    s = (deflate_state *) strm->state;
+
+    status = s->status;
+    if (status != INIT_STATE && status != BUSY_STATE &&
+	status != FINISH_STATE) {
+      return Z_STREAM_ERROR;
+    }
+
+    strm->state = NULL;
+
+    return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
+}
+
+/* =========================================================================
+ * Copy the source state to the destination state.
+ */
+int zlib_deflateCopy (
+	z_streamp dest,
+	z_streamp source
+)
+{
+#ifdef MAXSEG_64K
+    return Z_STREAM_ERROR;
+#else
+    deflate_state *ds;
+    deflate_state *ss;
+    ush *overlay;
+    deflate_workspace *mem;
+
+
+    if (source == NULL || dest == NULL || source->state == NULL) {
+        return Z_STREAM_ERROR;
+    }
+
+    ss = (deflate_state *) source->state;
+
+    *dest = *source;
+
+    mem = (deflate_workspace *) dest->workspace;
+
+    ds = &(mem->deflate_memory);
+
+    dest->state = (struct internal_state *) ds;
+    *ds = *ss;
+    ds->strm = dest;
+
+    ds->window = (Byte *) mem->window_memory;
+    ds->prev   = (Pos *)  mem->prev_memory;
+    ds->head   = (Pos *)  mem->head_memory;
+    overlay = (ush *) mem->overlay_memory;
+    ds->pending_buf = (uch *) overlay;
+
+    memcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+    memcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+    memcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+    memcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+    ds->l_desc.dyn_tree = ds->dyn_ltree;
+    ds->d_desc.dyn_tree = ds->dyn_dtree;
+    ds->bl_desc.dyn_tree = ds->bl_tree;
+
+    return Z_OK;
+#endif
+}
+
+/* ===========================================================================
+ * Read a new buffer from the current input stream, update the adler32
+ * and total number of bytes read.  All deflate() input goes through
+ * this function so some applications may wish to modify it to avoid
+ * allocating a large strm->next_in buffer and copying from it.
+ * (See also flush_pending()).
+ */
+static int read_buf(
+	z_streamp strm,
+	Byte *buf,
+	unsigned size
+)
+{
+    unsigned len = strm->avail_in;
+
+    if (len > size) len = size;
+    if (len == 0) return 0;
+
+    strm->avail_in  -= len;
+
+    if (!((deflate_state *)(strm->state))->noheader) {
+        strm->adler = zlib_adler32(strm->adler, strm->next_in, len);
+    }
+    memcpy(buf, strm->next_in, len);
+    strm->next_in  += len;
+    strm->total_in += len;
+
+    return (int)len;
+}
+
+/* ===========================================================================
+ * Initialize the "longest match" routines for a new zlib stream
+ */
+static void lm_init(
+	deflate_state *s
+)
+{
+    s->window_size = (ulg)2L*s->w_size;
+
+    CLEAR_HASH(s);
+
+    /* Set the default configuration parameters:
+     */
+    s->max_lazy_match   = configuration_table[s->level].max_lazy;
+    s->good_match       = configuration_table[s->level].good_length;
+    s->nice_match       = configuration_table[s->level].nice_length;
+    s->max_chain_length = configuration_table[s->level].max_chain;
+
+    s->strstart = 0;
+    s->block_start = 0L;
+    s->lookahead = 0;
+    s->match_length = s->prev_length = MIN_MATCH-1;
+    s->match_available = 0;
+    s->ins_h = 0;
+}
+
+/* ===========================================================================
+ * Set match_start to the longest match starting at the given string and
+ * return its length. Matches shorter or equal to prev_length are discarded,
+ * in which case the result is equal to prev_length and match_start is
+ * garbage.
+ * IN assertions: cur_match is the head of the hash chain for the current
+ *   string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1
+ * OUT assertion: the match length is not greater than s->lookahead.
+ */
+/* For 80x86 and 680x0, an optimized version will be provided in match.asm or
+ * match.S. The code will be functionally equivalent.
+ */
+static uInt longest_match(
+	deflate_state *s,
+	IPos cur_match			/* current match */
+)
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Byte *scan = s->window + s->strstart; /* current string */
+    register Byte *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Pos *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Byte *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ush*)scan;
+    register ush scan_end   = *(ush*)(scan+best_len-1);
+#else
+    register Byte *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2:
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ush*)(match+best_len-1) != scan_end ||
+            *(ush*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ush*)(scan+=2) == *(ush*)(match+=2) &&
+                 *(ush*)(scan+=2) == *(ush*)(match+=2) &&
+                 *(ush*)(scan+=2) == *(ush*)(match+=2) &&
+                 *(ush*)(scan+=2) == *(ush*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ush*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return best_len;
+    return s->lookahead;
+}
+
+#ifdef DEBUG_ZLIB
+/* ===========================================================================
+ * Check that the match at match_start is indeed a match.
+ */
+static void check_match(
+	deflate_state *s,
+	IPos start,
+	IPos match,
+	int length
+)
+{
+    /* check that the match is indeed a match */
+    if (memcmp((char *)s->window + match,
+                (char *)s->window + start, length) != EQUAL) {
+        fprintf(stderr, " start %u, match %u, length %d\n",
+		start, match, length);
+        do {
+	    fprintf(stderr, "%c%c", s->window[match++], s->window[start++]);
+	} while (--length != 0);
+        z_error("invalid match");
+    }
+    if (z_verbose > 1) {
+        fprintf(stderr,"\\[%d,%d]", start-match, length);
+        do { putc(s->window[start++], stderr); } while (--length != 0);
+    }
+}
+#else
+#  define check_match(s, start, match, length)
+#endif
+
+/* ===========================================================================
+ * Fill the window when the lookahead becomes insufficient.
+ * Updates strstart and lookahead.
+ *
+ * IN assertion: lookahead < MIN_LOOKAHEAD
+ * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD
+ *    At least one byte has been read, or avail_in == 0; reads are
+ *    performed for at least two bytes (required for the zip translate_eol
+ *    option -- not supported here).
+ */
+static void fill_window(
+	deflate_state *s
+)
+{
+    register unsigned n, m;
+    register Pos *p;
+    unsigned more;    /* Amount of free space at the end of the window. */
+    uInt wsize = s->w_size;
+
+    do {
+        more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
+
+        /* Deal with !@#$% 64K limit: */
+        if (more == 0 && s->strstart == 0 && s->lookahead == 0) {
+            more = wsize;
+
+        } else if (more == (unsigned)(-1)) {
+            /* Very unlikely, but possible on 16 bit machine if strstart == 0
+             * and lookahead == 1 (input done one byte at time)
+             */
+            more--;
+
+        /* If the window is almost full and there is insufficient lookahead,
+         * move the upper half to the lower one to make room in the upper half.
+         */
+        } else if (s->strstart >= wsize+MAX_DIST(s)) {
+
+            memcpy((char *)s->window, (char *)s->window+wsize,
+                   (unsigned)wsize);
+            s->match_start -= wsize;
+            s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
+            s->block_start -= (long) wsize;
+
+            /* Slide the hash table (could be avoided with 32 bit values
+               at the expense of memory usage). We slide even when level == 0
+               to keep the hash table consistent if we switch back to level > 0
+               later. (Using level 0 permanently is not an optimal usage of
+               zlib, so we don't care about this pathological case.)
+             */
+            n = s->hash_size;
+            p = &s->head[n];
+            do {
+                m = *--p;
+                *p = (Pos)(m >= wsize ? m-wsize : NIL);
+            } while (--n);
+
+            n = wsize;
+            p = &s->prev[n];
+            do {
+                m = *--p;
+                *p = (Pos)(m >= wsize ? m-wsize : NIL);
+                /* If n is not on any hash chain, prev[n] is garbage but
+                 * its value will never be used.
+                 */
+            } while (--n);
+            more += wsize;
+        }
+        if (s->strm->avail_in == 0) return;
+
+        /* If there was no sliding:
+         *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
+         *    more == window_size - lookahead - strstart
+         * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1)
+         * => more >= window_size - 2*WSIZE + 2
+         * In the BIG_MEM or MMAP case (not yet supported),
+         *   window_size == input_size + MIN_LOOKAHEAD  &&
+         *   strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD.
+         * Otherwise, window_size == 2*WSIZE so more >= 2.
+         * If there was sliding, more >= WSIZE. So in all cases, more >= 2.
+         */
+        Assert(more >= 2, "more < 2");
+
+        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
+        s->lookahead += n;
+
+        /* Initialize the hash value now that we have some input: */
+        if (s->lookahead >= MIN_MATCH) {
+            s->ins_h = s->window[s->strstart];
+            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+            Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+        }
+        /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
+         * but this is not important since only literal bytes will be emitted.
+         */
+
+    } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+}
+
+/* ===========================================================================
+ * Flush the current block, with given end-of-file flag.
+ * IN assertion: strstart is set to the end of the current match.
+ */
+#define FLUSH_BLOCK_ONLY(s, eof) { \
+   zlib_tr_flush_block(s, (s->block_start >= 0L ? \
+                   (char *)&s->window[(unsigned)s->block_start] : \
+                   NULL), \
+		(ulg)((long)s->strstart - s->block_start), \
+		(eof)); \
+   s->block_start = s->strstart; \
+   flush_pending(s->strm); \
+   Tracev((stderr,"[FLUSH]")); \
+}
+
+/* Same but force premature exit if necessary. */
+#define FLUSH_BLOCK(s, eof) { \
+   FLUSH_BLOCK_ONLY(s, eof); \
+   if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
+}
+
+/* ===========================================================================
+ * Copy without compression as much as possible from the input stream, return
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
+ * only for the level=0 compression option.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
+ */
+static block_state deflate_stored(
+	deflate_state *s,
+	int flush
+)
+{
+    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+     * to pending_buf_size, and each stored block has a 5 byte header:
+     */
+    ulg max_block_size = 0xffff;
+    ulg max_start;
+
+    if (max_block_size > s->pending_buf_size - 5) {
+        max_block_size = s->pending_buf_size - 5;
+    }
+
+    /* Copy as much as possible from input to output: */
+    for (;;) {
+        /* Fill the window as much as possible: */
+        if (s->lookahead <= 1) {
+
+            Assert(s->strstart < s->w_size+MAX_DIST(s) ||
+		   s->block_start >= (long)s->w_size, "slide too late");
+
+            fill_window(s);
+            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
+
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+	Assert(s->block_start >= 0L, "block gone");
+
+	s->strstart += s->lookahead;
+	s->lookahead = 0;
+
+	/* Emit a stored block if pending_buf will be full: */
+ 	max_start = s->block_start + max_block_size;
+        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
+	    /* strstart == 0 is possible when wraparound on 16-bit machine */
+	    s->lookahead = (uInt)(s->strstart - max_start);
+	    s->strstart = (uInt)max_start;
+            FLUSH_BLOCK(s, 0);
+	}
+	/* Flush if we may have to slide, otherwise block_start may become
+         * negative and the data will be gone:
+         */
+        if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
+            FLUSH_BLOCK(s, 0);
+	}
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Compress as much as possible from the input stream, return the current
+ * block state.
+ * This function does not perform lazy evaluation of matches and inserts
+ * new strings in the dictionary only for unmatched strings or for short
+ * matches. It is used only for the fast compression options.
+ */
+static block_state deflate_fast(
+	deflate_state *s,
+	int flush
+)
+{
+    IPos hash_head = NIL; /* head of the hash chain */
+    int bflush;           /* set if current block must be flushed */
+
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+	        return need_more;
+	    }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         * At this point we have always match_length < MIN_MATCH
+         */
+        if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            if (s->strategy != Z_HUFFMAN_ONLY) {
+                s->match_length = longest_match (s, hash_head);
+            }
+            /* longest_match() sets match_start */
+        }
+        if (s->match_length >= MIN_MATCH) {
+            check_match(s, s->strstart, s->match_start, s->match_length);
+
+            bflush = zlib_tr_tally(s, s->strstart - s->match_start,
+                               s->match_length - MIN_MATCH);
+
+            s->lookahead -= s->match_length;
+
+            /* Insert new strings in the hash table only if the match length
+             * is not too large. This saves time but degrades compression.
+             */
+            if (s->match_length <= s->max_insert_length &&
+                s->lookahead >= MIN_MATCH) {
+                s->match_length--; /* string at strstart already in hash table */
+                do {
+                    s->strstart++;
+                    INSERT_STRING(s, s->strstart, hash_head);
+                    /* strstart never exceeds WSIZE-MAX_MATCH, so there are
+                     * always MIN_MATCH bytes ahead.
+                     */
+                } while (--s->match_length != 0);
+                s->strstart++; 
+            } else {
+                s->strstart += s->match_length;
+                s->match_length = 0;
+                s->ins_h = s->window[s->strstart];
+                UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+#if MIN_MATCH != 3
+                Call UPDATE_HASH() MIN_MATCH-3 more times
+#endif
+                /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not
+                 * matter since it will be recomputed at next deflate call.
+                 */
+            }
+        } else {
+            /* No match, output a literal byte */
+            Tracevv((stderr,"%c", s->window[s->strstart]));
+            bflush = zlib_tr_tally (s, 0, s->window[s->strstart]);
+            s->lookahead--;
+            s->strstart++; 
+        }
+        if (bflush) FLUSH_BLOCK(s, 0);
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * Same as above, but achieves better compression. We use a lazy
+ * evaluation for matches: a match is finally adopted only if there is
+ * no better match at the next window position.
+ */
+static block_state deflate_slow(
+	deflate_state *s,
+	int flush
+)
+{
+    IPos hash_head = NIL;    /* head of hash chain */
+    int bflush;              /* set if current block must be flushed */
+
+    /* Process the input block. */
+    for (;;) {
+        /* Make sure that we always have enough lookahead, except
+         * at the end of the input file. We need MAX_MATCH bytes
+         * for the next match, plus MIN_MATCH bytes to insert the
+         * string following the next match.
+         */
+        if (s->lookahead < MIN_LOOKAHEAD) {
+            fill_window(s);
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+	        return need_more;
+	    }
+            if (s->lookahead == 0) break; /* flush the current block */
+        }
+
+        /* Insert the string window[strstart .. strstart+2] in the
+         * dictionary, and set hash_head to the head of the hash chain:
+         */
+        if (s->lookahead >= MIN_MATCH) {
+            INSERT_STRING(s, s->strstart, hash_head);
+        }
+
+        /* Find the longest match, discarding those <= prev_length.
+         */
+        s->prev_length = s->match_length, s->prev_match = s->match_start;
+        s->match_length = MIN_MATCH-1;
+
+        if (hash_head != NIL && s->prev_length < s->max_lazy_match &&
+            s->strstart - hash_head <= MAX_DIST(s)) {
+            /* To simplify the code, we prevent matches with the string
+             * of window index 0 (in particular we have to avoid a match
+             * of the string with itself at the start of the input file).
+             */
+            if (s->strategy != Z_HUFFMAN_ONLY) {
+                s->match_length = longest_match (s, hash_head);
+            }
+            /* longest_match() sets match_start */
+
+            if (s->match_length <= 5 && (s->strategy == Z_FILTERED ||
+                 (s->match_length == MIN_MATCH &&
+                  s->strstart - s->match_start > TOO_FAR))) {
+
+                /* If prev_match is also MIN_MATCH, match_start is garbage
+                 * but we will ignore the current match anyway.
+                 */
+                s->match_length = MIN_MATCH-1;
+            }
+        }
+        /* If there was a match at the previous step and the current
+         * match is not better, output the previous match:
+         */
+        if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) {
+            uInt max_insert = s->strstart + s->lookahead - MIN_MATCH;
+            /* Do not insert strings in hash table beyond this. */
+
+            check_match(s, s->strstart-1, s->prev_match, s->prev_length);
+
+            bflush = zlib_tr_tally(s, s->strstart -1 - s->prev_match,
+				   s->prev_length - MIN_MATCH);
+
+            /* Insert in hash table all strings up to the end of the match.
+             * strstart-1 and strstart are already inserted. If there is not
+             * enough lookahead, the last two strings are not inserted in
+             * the hash table.
+             */
+            s->lookahead -= s->prev_length-1;
+            s->prev_length -= 2;
+            do {
+                if (++s->strstart <= max_insert) {
+                    INSERT_STRING(s, s->strstart, hash_head);
+                }
+            } while (--s->prev_length != 0);
+            s->match_available = 0;
+            s->match_length = MIN_MATCH-1;
+            s->strstart++;
+
+            if (bflush) FLUSH_BLOCK(s, 0);
+
+        } else if (s->match_available) {
+            /* If there was no match at the previous position, output a
+             * single literal. If there was a match but the current match
+             * is longer, truncate the previous match to a single literal.
+             */
+            Tracevv((stderr,"%c", s->window[s->strstart-1]));
+            if (zlib_tr_tally (s, 0, s->window[s->strstart-1])) {
+                FLUSH_BLOCK_ONLY(s, 0);
+            }
+            s->strstart++;
+            s->lookahead--;
+            if (s->strm->avail_out == 0) return need_more;
+        } else {
+            /* There is no previous match to compare with, wait for
+             * the next step to decide.
+             */
+            s->match_available = 1;
+            s->strstart++;
+            s->lookahead--;
+        }
+    }
+    Assert (flush != Z_NO_FLUSH, "no flush?");
+    if (s->match_available) {
+        Tracevv((stderr,"%c", s->window[s->strstart-1]));
+        zlib_tr_tally (s, 0, s->window[s->strstart-1]);
+        s->match_available = 0;
+    }
+    FLUSH_BLOCK(s, flush == Z_FINISH);
+    return flush == Z_FINISH ? finish_done : block_done;
+}
+
+int zlib_deflate_workspacesize(void)
+{
+    return sizeof(deflate_workspace);
+}