Merge ../linux-2.6

466 files changed, 14223 insertions, 8165 deletions

diff --git a/drivers/Kconfig b/drivers/Kconfig
index 5c91d6afb11..aeb5ab2391e 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,8 +68,6 @@ source "drivers/leds/Kconfig"
 
 source "drivers/infiniband/Kconfig"
 
-source "drivers/sn/Kconfig"
-
 source "drivers/edac/Kconfig"
 
 source "drivers/rtc/Kconfig"
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 48718b7f4fa..76656acd00d 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -188,6 +188,11 @@ static ssize_t driver_bind(struct device_driver *drv,
 		up(&dev->sem);
 		if (dev->parent)
 			up(&dev->parent->sem);
+
+		if (err > 0) 		/* success */
+			err = count;
+		else if (err == 0)	/* driver didn't accept device */
+			err = -ENODEV;
 	}
 	put_device(dev);
 	put_bus(bus);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index df7fdabd073..b1ea4df85c7 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -456,6 +456,35 @@ static void class_device_remove_attrs(struct class_device * cd)
 	}
 }
 
+static int class_device_add_groups(struct class_device * cd)
+{
+	int i;
+	int error = 0;
+
+	if (cd->groups) {
+		for (i = 0; cd->groups[i]; i++) {
+			error = sysfs_create_group(&cd->kobj, cd->groups[i]);
+			if (error) {
+				while (--i >= 0)
+					sysfs_remove_group(&cd->kobj, cd->groups[i]);
+				goto out;
+			}
+		}
+	}
+out:
+	return error;
+}
+
+static void class_device_remove_groups(struct class_device * cd)
+{
+	int i;
+	if (cd->groups) {
+		for (i = 0; cd->groups[i]; i++) {
+			sysfs_remove_group(&cd->kobj, cd->groups[i]);
+		}
+	}
+}
+
 static ssize_t show_dev(struct class_device *class_dev, char *buf)
 {
 	return print_dev_t(buf, class_dev->devt);
@@ -559,17 +588,18 @@ int class_device_add(struct class_device *class_dev)
 				  class_name);
 	}
 
+	class_device_add_groups(class_dev);
+
 	kobject_uevent(&class_dev->kobj, KOBJ_ADD);
 
 	/* notify any interfaces this device is now here */
-	if (parent_class) {
-		down(&parent_class->sem);
-		list_add_tail(&class_dev->node, &parent_class->children);
-		list_for_each_entry(class_intf, &parent_class->interfaces, node)
-			if (class_intf->add)
-				class_intf->add(class_dev, class_intf);
-		up(&parent_class->sem);
+	down(&parent_class->sem);
+	list_add_tail(&class_dev->node, &parent_class->children);
+	list_for_each_entry(class_intf, &parent_class->interfaces, node) {
+		if (class_intf->add)
+			class_intf->add(class_dev, class_intf);
 	}
+	up(&parent_class->sem);
 
  register_done:
 	if (error) {
@@ -673,6 +703,7 @@ void class_device_del(struct class_device *class_dev)
 	if (class_dev->devt_attr)
 		class_device_remove_file(class_dev, class_dev->devt_attr);
 	class_device_remove_attrs(class_dev);
+	class_device_remove_groups(class_dev);
 
 	kobject_uevent(&class_dev->kobj, KOBJ_REMOVE);
 	kobject_del(&class_dev->kobj);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 730a9ce0a14..889c7111123 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -209,7 +209,7 @@ static void __device_release_driver(struct device * dev)
 		sysfs_remove_link(&dev->kobj, "driver");
 		klist_remove(&dev->knode_driver);
 
-		if (dev->bus->remove)
+		if (dev->bus && dev->bus->remove)
 			dev->bus->remove(dev);
 		else if (drv->remove)
 			drv->remove(dev);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 47231820523..0c99ae6a340 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -86,18 +86,9 @@ firmware_timeout_store(struct class *class, const char *buf, size_t count)
 static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store);
 
 static void  fw_class_dev_release(struct class_device *class_dev);
-int firmware_class_uevent(struct class_device *dev, char **envp,
-			   int num_envp, char *buffer, int buffer_size);
 
-static struct class firmware_class = {
-	.name		= "firmware",
-	.uevent	= firmware_class_uevent,
-	.release	= fw_class_dev_release,
-};
-
-int
-firmware_class_uevent(struct class_device *class_dev, char **envp,
-		       int num_envp, char *buffer, int buffer_size)
+static int firmware_class_uevent(struct class_device *class_dev, char **envp,
+				 int num_envp, char *buffer, int buffer_size)
 {
 	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
 	int i = 0, len = 0;
@@ -116,6 +107,12 @@ firmware_class_uevent(struct class_device *class_dev, char **envp,
 	return 0;
 }
 
+static struct class firmware_class = {
+	.name		= "firmware",
+	.uevent		= firmware_class_uevent,
+	.release	= fw_class_dev_release,
+};
+
 static ssize_t
 firmware_loading_show(struct class_device *class_dev, char *buf)
 {
@@ -493,25 +490,6 @@ release_firmware(const struct firmware *fw)
 	}
 }
 
-/**
- * register_firmware: - provide a firmware image for later usage
- * @name: name of firmware image file
- * @data: buffer pointer for the firmware image
- * @size: size of the data buffer area
- *
- *	Make sure that @data will be available by requesting firmware @name.
- *
- *	Note: This will not be possible until some kind of persistence
- *	is available.
- **/
-void
-register_firmware(const char *name, const u8 *data, size_t size)
-{
-	/* This is meaningless without firmware caching, so until we
-	 * decide if firmware caching is reasonable just leave it as a
-	 * noop */
-}
-
 /* Async support */
 struct firmware_work {
 	struct work_struct work;
@@ -630,4 +608,3 @@ module_exit(firmware_class_exit);
 EXPORT_SYMBOL(release_firmware);
 EXPORT_SYMBOL(request_firmware);
 EXPORT_SYMBOL(request_firmware_nowait);
-EXPORT_SYMBOL(register_firmware);
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index bdb60663f2e..2a769cc6f5f 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -8,8 +8,9 @@
  *
  */
 
-#include <linux/vt_kern.h>
 #include <linux/device.h>
+#include <linux/kallsyms.h>
+#include <linux/pm.h>
 #include "../base.h"
 #include "power.h"
 
@@ -58,11 +59,13 @@ int suspend_device(struct device * dev, pm_message_t state)
 	if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
 		dev_dbg(dev, "suspending\n");
 		error = dev->bus->suspend(dev, state);
+		suspend_report_result(dev->bus->suspend, error);
 	}
 	up(&dev->sem);
 	return error;
 }
 
+
 /**
  *	device_suspend - Save state and stop all devices in system.
  *	@state:		Power state to put each device in.
@@ -82,9 +85,6 @@ int device_suspend(pm_message_t state)
 {
 	int error = 0;
 
-	if (!is_console_suspend_safe())
-		return -EINVAL;
-
 	down(&dpm_sem);
 	down(&dpm_list_sem);
 	while (!list_empty(&dpm_active) && error == 0) {
@@ -169,3 +169,12 @@ int device_power_down(pm_message_t state)
 
 EXPORT_SYMBOL_GPL(device_power_down);
 
+void __suspend_report_result(const char *function, void *fn, int ret)
+{
+	if (ret) {
+		printk(KERN_ERR "%s(): ", function);
+		print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn);
+		printk("%d\n", ret);
+	}
+}
+EXPORT_SYMBOL_GPL(__suspend_report_result);
diff --git a/drivers/base/topology.c b/drivers/base/topology.c
index 915810f6237..8c52421cbc5 100644
--- a/drivers/base/topology.c
+++ b/drivers/base/topology.c
@@ -107,7 +107,7 @@ static int __cpuinit topology_remove_dev(struct sys_device * sys_dev)
 	return 0;
 }
 
-static int __cpuinit topology_cpu_callback(struct notifier_block *nfb,
+static int topology_cpu_callback(struct notifier_block *nfb,
 		unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 1b0fd31c57c..1319d8f2064 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1180,6 +1180,53 @@ static int revalidate_allvol(ctlr_info_t *host)
         return 0;
 }
 
+static inline void complete_buffers(struct bio *bio, int status)
+{
+	while (bio) {
+		struct bio *xbh = bio->bi_next;
+		int nr_sectors = bio_sectors(bio);
+
+		bio->bi_next = NULL;
+		blk_finished_io(len);
+		bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
+		bio = xbh;
+	}
+
+}
+
+static void cciss_softirq_done(struct request *rq)
+{
+	CommandList_struct *cmd = rq->completion_data;
+	ctlr_info_t *h = hba[cmd->ctlr];
+	unsigned long flags;
+	u64bit temp64;
+	int i, ddir;
+
+	if (cmd->Request.Type.Direction == XFER_READ)
+		ddir = PCI_DMA_FROMDEVICE;
+	else
+		ddir = PCI_DMA_TODEVICE;
+
+	/* command did not need to be retried */
+	/* unmap the DMA mapping for all the scatter gather elements */
+	for(i=0; i<cmd->Header.SGList; i++) {
+		temp64.val32.lower = cmd->SG[i].Addr.lower;
+		temp64.val32.upper = cmd->SG[i].Addr.upper;
+		pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
+	}
+
+	complete_buffers(rq->bio, rq->errors);
+
+#ifdef CCISS_DEBUG
+	printk("Done with %p\n", rq);
+#endif /* CCISS_DEBUG */
+
+	spin_lock_irqsave(&h->lock, flags);
+	end_that_request_last(rq, rq->errors);
+	cmd_free(h, cmd,1);
+	spin_unlock_irqrestore(&h->lock, flags);
+}
+
 /* This function will check the usage_count of the drive to be updated/added.
  * If the usage_count is zero then the drive information will be updated and
  * the disk will be re-registered with the kernel.  If not then it will be
@@ -1248,6 +1295,8 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
 
 		blk_queue_max_sectors(disk->queue, 512);
 
+		blk_queue_softirq_done(disk->queue, cciss_softirq_done);
+
 		disk->queue->queuedata = hba[ctlr];
 
 		blk_queue_hardsect_size(disk->queue,
@@ -2147,20 +2196,6 @@ static void start_io( ctlr_info_t *h)
 		addQ (&(h->cmpQ), c); 
 	}
 }
-
-static inline void complete_buffers(struct bio *bio, int status)
-{
-	while (bio) {
-		struct bio *xbh = bio->bi_next; 
-		int nr_sectors = bio_sectors(bio);
-
-		bio->bi_next = NULL; 
-		blk_finished_io(len);
-		bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
-		bio = xbh;
-	}
-
-} 
 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
 /* Zeros out the error record and then resends the command back */
 /* to the controller */
@@ -2178,39 +2213,6 @@ static inline void resend_cciss_cmd( ctlr_info_t *h, CommandList_struct *c)
 	start_io(h);
 }
 
-static void cciss_softirq_done(struct request *rq)
-{
-	CommandList_struct *cmd = rq->completion_data;
-	ctlr_info_t *h = hba[cmd->ctlr];
-	unsigned long flags;
-	u64bit temp64;
-	int i, ddir;
-
-	if (cmd->Request.Type.Direction == XFER_READ)
-		ddir = PCI_DMA_FROMDEVICE;
-	else
-		ddir = PCI_DMA_TODEVICE;
-
-	/* command did not need to be retried */
-	/* unmap the DMA mapping for all the scatter gather elements */
-	for(i=0; i<cmd->Header.SGList; i++) {
-		temp64.val32.lower = cmd->SG[i].Addr.lower;
-		temp64.val32.upper = cmd->SG[i].Addr.upper;
-		pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
-	}
-
-	complete_buffers(rq->bio, rq->errors);
-
-#ifdef CCISS_DEBUG
-	printk("Done with %p\n", rq);
-#endif /* CCISS_DEBUG */ 
-
-	spin_lock_irqsave(&h->lock, flags);
-	end_that_request_last(rq, rq->errors);
-	cmd_free(h, cmd,1);
-	spin_unlock_irqrestore(&h->lock, flags);
-}
-
 /* checks the status of the job and calls complete buffers to mark all 
  * buffers for the completed job. Note that this function does not need
  * to hold the hba/queue lock.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index bedb689b051..dff1e67b1dd 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4301,7 +4301,7 @@ static int __init floppy_init(void)
 	}
 
 	use_virtual_dma = can_use_virtual_dma & 1;
-#if defined(CONFIG_PPC64)
+#if defined(CONFIG_PPC_MERGE)
 	if (check_legacy_ioport(FDC1)) {
 		del_timer(&fd_timeout);
 		err = -ENODEV;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index f73446f580d..c688c25992e 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc)
 		kfree(lun);
 	}
 
+	usb_set_intfdata(sc->intf, NULL);
+	usb_put_intf(sc->intf);
+	usb_put_dev(sc->dev);
 	kfree(sc);
 }
 
@@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface *intf,
 	// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 	usb_set_intfdata(intf, sc);
 	usb_get_dev(sc->dev);
-	// usb_get_intf(sc->intf);	/* Do we need this? */
+	/*
+	 * Since we give the interface struct to the block level through
+	 * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
+	 * oopses on close after a disconnect (kernels 2.6.16 and up).
+	 */
+	usb_get_intf(sc->intf);
 
 	snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
 	    sc->dev->bus->busnum, sc->dev->devnum);
@@ -2286,7 +2294,7 @@ static int ub_probe(struct usb_interface *intf,
 
 err_dev_desc:
 	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
+	usb_put_intf(sc->intf);
 	usb_put_dev(sc->dev);
 	kfree(sc);
 err_core:
@@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_interface *intf)
 	 * and no URBs left in transit.
 	 */
 
-	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
-	sc->intf = NULL;
-	usb_put_dev(sc->dev);
-	sc->dev = NULL;
-
 	ub_put(sc);
 }
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 402296670d3..78d928f9d9f 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -291,7 +291,7 @@ config SX
 
 config RIO
 	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && !64BIT
+	depends on SERIAL_NONSTANDARD
 	help
 	  This is a driver for the Specialix RIO, a smart serial card which
 	  drives an outboard box that can support up to 128 ports.  Product
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 0b9cf9c59a2..7c88c060a9e 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -86,7 +86,7 @@ config AGP_NVIDIA
 
 config AGP_SIS
 	tristate "SiS chipset support"
-	depends on AGP && X86_32
+	depends on AGP
 	help
 	  This option gives you AGP support for the GLX component of
 	  X on Silicon Integrated Systems [SiS] chipsets.
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 36517d4d1ad..ac3c33a2e37 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -617,6 +617,9 @@ static int agp_amd64_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
+		nforce3_agp_init(pdev);
+
 	return amd_8151_configure();
 }
 
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index fed0a87448d..86a966b6523 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -64,6 +64,12 @@ static struct gatt_mask efficeon_generic_masks[] =
 	{.mask = 0x00000001, .type = 0}
 };
 
+/* This function does the same thing as mask_memory() for this chipset... */
+static inline unsigned long efficeon_mask_memory(unsigned long addr)
+{
+	return addr | 0x00000001;
+}
+
 static struct aper_size_info_lvl2 efficeon_generic_sizes[4] =
 {
 	{256, 65536, 0},
@@ -251,7 +257,7 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t
 	last_page = NULL;
 	for (i = 0; i < count; i++) {
 		int index = pg_start + i;
-		unsigned long insert = mem->memory[i];
+		unsigned long insert = efficeon_mask_memory(mem->memory[i]);
 
 		page = (unsigned int *) efficeon_private.l1_table[index >> 10];
 
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index 97b0a890ba7..b8ec25d1747 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -345,6 +345,12 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata =
 		.chipset_name	= "PT880",
 	},
 
+	/* PT880 Ultra */
+	{
+		.device_id	= PCI_DEVICE_ID_VIA_PT880ULTRA,
+		.chipset_name	= "PT880 Ultra",
+	},
+
 	/* PT890 */
 	{
 		.device_id	= PCI_DEVICE_ID_VIA_8783_0,
@@ -511,6 +517,7 @@ static struct pci_device_id agp_via_pci_table[] = {
 	ID(PCI_DEVICE_ID_VIA_8763_0),
 	ID(PCI_DEVICE_ID_VIA_8378_0),
 	ID(PCI_DEVICE_ID_VIA_PT880),
+	ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
 	ID(PCI_DEVICE_ID_VIA_8783_0),
 	ID(PCI_DEVICE_ID_VIA_PX8X0_0),
 	ID(PCI_DEVICE_ID_VIA_3269_0),
diff --git a/drivers/char/cs5535_gpio.c b/drivers/char/cs5535_gpio.c
index 5d72f50de1a..46d66037b91 100644
--- a/drivers/char/cs5535_gpio.c
+++ b/drivers/char/cs5535_gpio.c
@@ -241,9 +241,10 @@ static int __init cs5535_gpio_init(void)
 static void __exit cs5535_gpio_cleanup(void)
 {
 	dev_t dev_id = MKDEV(major, 0);
+
+	cdev_del(&cs5535_gpio_cdev);
 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
-	if (gpio_base != 0)
-		release_region(gpio_base, CS5535_GPIO_SIZE);
+	release_region(gpio_base, CS5535_GPIO_SIZE);
 }
 
 module_init(cs5535_gpio_init);
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index edc72a6348a..cb76e5ca9a2 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -815,8 +815,6 @@ extern int drm_mem_info(char *buf, char **start, off_t offset,
 extern void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area);
 extern void *drm_ioremap(unsigned long offset, unsigned long size,
 			 drm_device_t * dev);
-extern void *drm_ioremap_nocache(unsigned long offset, unsigned long size,
-				 drm_device_t * dev);
 extern void drm_ioremapfree(void *pt, unsigned long size, drm_device_t * dev);
 
 extern DRM_AGP_MEM *drm_alloc_agp(drm_device_t * dev, int pages, u32 type);
@@ -891,7 +889,6 @@ extern int drm_lock_free(drm_device_t * dev,
 				/* Buffer management support (drm_bufs.h) */
 extern int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request);
 extern int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request);
-extern int drm_addbufs_fb(drm_device_t *dev, drm_buf_desc_t *request);
 extern int drm_addmap(drm_device_t * dev, unsigned int offset,
 		      unsigned int size, drm_map_type_t type,
 		      drm_map_flags_t flags, drm_local_map_t ** map_ptr);
@@ -1022,11 +1019,13 @@ static __inline__ void drm_core_ioremap(struct drm_map *map,
 	map->handle = drm_ioremap(map->offset, map->size, dev);
 }
 
+#if 0
 static __inline__ void drm_core_ioremap_nocache(struct drm_map *map,
 						struct drm_device *dev)
 {
 	map->handle = drm_ioremap_nocache(map->offset, map->size, dev);
 }
+#endif  /*  0  */
 
 static __inline__ void drm_core_ioremapfree(struct drm_map *map,
 					    struct drm_device *dev)
diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c
index fabc930c67a..40bfd9b01e3 100644
--- a/drivers/char/drm/drm_agpsupport.c
+++ b/drivers/char/drm/drm_agpsupport.c
@@ -503,8 +503,6 @@ int drm_agp_bind_memory(DRM_AGP_MEM * handle, off_t start)
 	return agp_bind_memory(handle, start);
 }
 
-EXPORT_SYMBOL(drm_agp_bind_memory);
-
 /** Calls agp_unbind_memory() */
 int drm_agp_unbind_memory(DRM_AGP_MEM * handle)
 {
diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c
index 8a9cf12e618..006b06d2972 100644
--- a/drivers/char/drm/drm_bufs.c
+++ b/drivers/char/drm/drm_bufs.c
@@ -386,7 +386,6 @@ int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map)
 
 	return 0;
 }
-EXPORT_SYMBOL(drm_rmmap_locked);
 
 int drm_rmmap(drm_device_t *dev, drm_local_map_t *map)
 {
@@ -398,7 +397,6 @@ int drm_rmmap(drm_device_t *dev, drm_local_map_t *map)
 
 	return ret;
 }
-EXPORT_SYMBOL(drm_rmmap);
 
 /* The rmmap ioctl appears to be unnecessary.  All mappings are torn down on
  * the last close of the device, and this is necessary for cleanup when things
@@ -1053,7 +1051,7 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request)
 	return 0;
 }
 
-int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
+static int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 {
 	drm_device_dma_t *dma = dev->dma;
 	drm_buf_entry_t *entry;
@@ -1212,7 +1210,6 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 	atomic_dec(&dev->buf_alloc);
 	return 0;
 }
-EXPORT_SYMBOL(drm_addbufs_fb);
 
 
 /**
diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c
index dc6bbe8a18d..3c0b882a8e7 100644
--- a/drivers/char/drm/drm_drv.c
+++ b/drivers/char/drm/drm_drv.c
@@ -75,8 +75,8 @@ static drm_ioctl_desc_t drm_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_IOCTL_SET_SAREA_CTX)] = {drm_setsareactx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
 	[DRM_IOCTL_NR(DRM_IOCTL_GET_SAREA_CTX)] = {drm_getsareactx, DRM_AUTH},
 
-	[DRM_IOCTL_NR(DRM_IOCTL_ADD_CTX)] = {drm_addctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
-	[DRM_IOCTL_NR(DRM_IOCTL_RM_CTX)] = {drm_rmctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
+	[DRM_IOCTL_NR(DRM_IOCTL_ADD_CTX)] = {drm_addctx, DRM_AUTH|DRM_ROOT_ONLY},
+	[DRM_IOCTL_NR(DRM_IOCTL_RM_CTX)] = {drm_rmctx, DRM_AUTH|DRM_ROOT_ONLY},
 	[DRM_IOCTL_NR(DRM_IOCTL_MOD_CTX)] = {drm_modctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
 	[DRM_IOCTL_NR(DRM_IOCTL_GET_CTX)] = {drm_getctx, DRM_AUTH},
 	[DRM_IOCTL_NR(DRM_IOCTL_SWITCH_CTX)] = {drm_switchctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c
index dddf8de6614..7e3318e1d1c 100644
--- a/drivers/char/drm/drm_memory.c
+++ b/drivers/char/drm/drm_memory.c
@@ -80,6 +80,71 @@ void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area)
 }
 
 #if __OS_HAS_AGP
+/*
+ * Find the drm_map that covers the range [offset, offset+size).
+ */
+static drm_map_t *drm_lookup_map(unsigned long offset,
+				 unsigned long size, drm_device_t * dev)
+{
+	struct list_head *list;
+	drm_map_list_t *r_list;
+	drm_map_t *map;
+
+	list_for_each(list, &dev->maplist->head) {
+		r_list = (drm_map_list_t *) list;
+		map = r_list->map;
+		if (!map)
+			continue;
+		if (map->offset <= offset
+		    && (offset + size) <= (map->offset + map->size))
+			return map;
+	}
+	return NULL;
+}
+
+static void *agp_remap(unsigned long offset, unsigned long size,
+		       drm_device_t * dev)
+{
+	unsigned long *phys_addr_map, i, num_pages =
+	    PAGE_ALIGN(size) / PAGE_SIZE;
+	struct drm_agp_mem *agpmem;
+	struct page **page_map;
+	void *addr;
+
+	size = PAGE_ALIGN(size);
+
+#ifdef __alpha__
+	offset -= dev->hose->mem_space->start;
+#endif
+
+	for (agpmem = dev->agp->memory; agpmem; agpmem = agpmem->next)
+		if (agpmem->bound <= offset
+		    && (agpmem->bound + (agpmem->pages << PAGE_SHIFT)) >=
+		    (offset + size))
+			break;
+	if (!agpmem)
+		return NULL;
+
+	/*
+	 * OK, we're mapping AGP space on a chipset/platform on which memory accesses by
+	 * the CPU do not get remapped by the GART.  We fix this by using the kernel's
+	 * page-table instead (that's probably faster anyhow...).
+	 */
+	/* note: use vmalloc() because num_pages could be large... */
+	page_map = vmalloc(num_pages * sizeof(struct page *));
+	if (!page_map)
+		return NULL;
+
+	phys_addr_map =
+	    agpmem->memory->memory + (offset - agpmem->bound) / PAGE_SIZE;
+	for (i = 0; i < num_pages; ++i)
+		page_map[i] = pfn_to_page(phys_addr_map[i] >> PAGE_SHIFT);
+	addr = vmap(page_map, num_pages, VM_IOREMAP, PAGE_AGP);
+	vfree(page_map);
+
+	return addr;
+}
+
 /** Wrapper around agp_allocate_memory() */
 DRM_AGP_MEM *drm_alloc_agp(drm_device_t * dev, int pages, u32 type)
 {
@@ -103,5 +168,74 @@ int drm_unbind_agp(DRM_AGP_MEM * handle)
 {
 	return drm_agp_unbind_memory(handle);
 }
+
+#else  /*  __OS_HAS_AGP  */
+
+static inline drm_map_t *drm_lookup_map(unsigned long offset,
+					unsigned long size, drm_device_t * dev)
+{
+	return NULL;
+}
+
+static inline void *agp_remap(unsigned long offset, unsigned long size,
+			      drm_device_t * dev)
+{
+	return NULL;
+}
+
 #endif				/* agp */
+
+void *drm_ioremap(unsigned long offset, unsigned long size,
+				drm_device_t * dev)
+{
+	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
+		drm_map_t *map = drm_lookup_map(offset, size, dev);
+
+		if (map && map->type == _DRM_AGP)
+			return agp_remap(offset, size, dev);
+	}
+	return ioremap(offset, size);
+}
+EXPORT_SYMBOL(drm_ioremap);
+
+#if 0
+void *drm_ioremap_nocache(unsigned long offset,
+					unsigned long size, drm_device_t * dev)
+{
+	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
+		drm_map_t *map = drm_lookup_map(offset, size, dev);
+
+		if (map && map->type == _DRM_AGP)
+			return agp_remap(offset, size, dev);
+	}
+	return ioremap_nocache(offset, size);
+}
+#endif  /*  0  */
+
+void drm_ioremapfree(void *pt, unsigned long size,
+				   drm_device_t * dev)
+{
+	/*
+	 * This is a bit ugly.  It would be much cleaner if the DRM API would use separate
+	 * routines for handling mappings in the AGP space.  Hopefully this can be done in
+	 * a future revision of the interface...
+	 */
+	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture
+	    && ((unsigned long)pt >= VMALLOC_START
+		&& (unsigned long)pt < VMALLOC_END)) {
+		unsigned long offset;
+		drm_map_t *map;
+
+		offset = drm_follow_page(pt) | ((unsigned long)pt & ~PAGE_MASK);
+		map = drm_lookup_map(offset, size, dev);
+		if (map && map->type == _DRM_AGP) {
+			vunmap(pt);
+			return;
+		}
+	}
+
+	iounmap(pt);
+}
+EXPORT_SYMBOL(drm_ioremapfree);
+
 #endif				/* debug_memory */
diff --git a/drivers/char/drm/drm_memory.h b/drivers/char/drm/drm_memory.h
index 3732a61c376..714d9aedcff 100644
--- a/drivers/char/drm/drm_memory.h
+++ b/drivers/char/drm/drm_memory.h
@@ -57,71 +57,6 @@
 # endif
 #endif
 
-/*
- * Find the drm_map that covers the range [offset, offset+size).
- */
-static inline drm_map_t *drm_lookup_map(unsigned long offset,
-					unsigned long size, drm_device_t * dev)
-{
-	struct list_head *list;
-	drm_map_list_t *r_list;
-	drm_map_t *map;
-
-	list_for_each(list, &dev->maplist->head) {
-		r_list = (drm_map_list_t *) list;
-		map = r_list->map;
-		if (!map)
-			continue;
-		if (map->offset <= offset
-		    && (offset + size) <= (map->offset + map->size))
-			return map;
-	}
-	return NULL;
-}
-
-static inline void *agp_remap(unsigned long offset, unsigned long size,
-			      drm_device_t * dev)
-{
-	unsigned long *phys_addr_map, i, num_pages =
-	    PAGE_ALIGN(size) / PAGE_SIZE;
-	struct drm_agp_mem *agpmem;
-	struct page **page_map;
-	void *addr;
-
-	size = PAGE_ALIGN(size);
-
-#ifdef __alpha__
-	offset -= dev->hose->mem_space->start;
-#endif
-
-	for (agpmem = dev->agp->memory; agpmem; agpmem = agpmem->next)
-		if (agpmem->bound <= offset
-		    && (agpmem->bound + (agpmem->pages << PAGE_SHIFT)) >=
-		    (offset + size))
-			break;
-	if (!agpmem)
-		return NULL;
-
-	/*
-	 * OK, we're mapping AGP space on a chipset/platform on which memory accesses by
-	 * the CPU do not get remapped by the GART.  We fix this by using the kernel's
-	 * page-table instead (that's probably faster anyhow...).
-	 */
-	/* note: use vmalloc() because num_pages could be large... */
-	page_map = vmalloc(num_pages * sizeof(struct page *));
-	if (!page_map)
-		return NULL;
-
-	phys_addr_map =
-	    agpmem->memory->memory + (offset - agpmem->bound) / PAGE_SIZE;
-	for (i = 0; i < num_pages; ++i)
-		page_map[i] = pfn_to_page(phys_addr_map[i] >> PAGE_SHIFT);
-	addr = vmap(page_map, num_pages, VM_IOREMAP, PAGE_AGP);
-	vfree(page_map);
-
-	return addr;
-}
-
 static inline unsigned long drm_follow_page(void *vaddr)
 {
 	pgd_t *pgd = pgd_offset_k((unsigned long)vaddr);
@@ -133,18 +68,6 @@ static inline unsigned long drm_follow_page(void *vaddr)
 
 #else				/* __OS_HAS_AGP */
 
-static inline drm_map_t *drm_lookup_map(unsigned long offset,
-					unsigned long size, drm_device_t * dev)
-{
-	return NULL;
-}
-
-static inline void *agp_remap(unsigned long offset, unsigned long size,
-			      drm_device_t * dev)
-{
-	return NULL;
-}
-
 static inline unsigned long drm_follow_page(void *vaddr)
 {
 	return 0;
@@ -152,51 +75,8 @@ static inline unsigned long drm_follow_page(void *vaddr)
 
 #endif
 
-static inline void *drm_ioremap(unsigned long offset, unsigned long size,
-				drm_device_t * dev)
-{
-	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
-		drm_map_t *map = drm_lookup_map(offset, size, dev);
-
-		if (map && map->type == _DRM_AGP)
-			return agp_remap(offset, size, dev);
-	}
-	return ioremap(offset, size);
-}
-
-static inline void *drm_ioremap_nocache(unsigned long offset,
-					unsigned long size, drm_device_t * dev)
-{
-	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
-		drm_map_t *map = drm_lookup_map(offset, size, dev);
-
-		if (map && map->type == _DRM_AGP)
-			return agp_remap(offset, size, dev);
-	}
-	return ioremap_nocache(offset, size);
-}
-
-static inline void drm_ioremapfree(void *pt, unsigned long size,
-				   drm_device_t * dev)
-{
-	/*
-	 * This is a bit ugly.  It would be much cleaner if the DRM API would use separate
-	 * routines for handling mappings in the AGP space.  Hopefully this can be done in
-	 * a future revision of the interface...
-	 */
-	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture
-	    && ((unsigned long)pt >= VMALLOC_START
-		&& (unsigned long)pt < VMALLOC_END)) {
-		unsigned long offset;
-		drm_map_t *map;
-
-		offset = drm_follow_page(pt) | ((unsigned long)pt & ~PAGE_MASK);
-		map = drm_lookup_map(offset, size, dev);
-		if (map && map->type == _DRM_AGP) {
-			vunmap(pt);
-			return;
-		}
-	}
+void *drm_ioremap(unsigned long offset, unsigned long size,
+				drm_device_t * dev);
 
-	iounmap(pt);
-}
+void drm_ioremapfree(void *pt, unsigned long size,
+				   drm_device_t * dev);
diff --git a/drivers/char/drm/drm_memory_debug.h b/drivers/char/drm/drm_memory_debug.h
index 7868341817d..6543b9a14c4 100644
--- a/drivers/char/drm/drm_memory_debug.h
+++ b/drivers/char/drm/drm_memory_debug.h
@@ -229,6 +229,7 @@ void *drm_ioremap (unsigned long offset, unsigned long size,
 	return pt;
 }
 
+#if 0
 void *drm_ioremap_nocache (unsigned long offset, unsigned long size,
 			    drm_device_t * dev) {
 	void *pt;
@@ -251,6 +252,7 @@ void *drm_ioremap_nocache (unsigned long offset, unsigned long size,
 	spin_unlock(&drm_mem_lock);
 	return pt;
 }
+#endif  /*  0  */
 
 void drm_ioremapfree (void *pt, unsigned long size, drm_device_t * dev) {
 	int alloc_count;
diff --git a/drivers/char/drm/drm_pci.c b/drivers/char/drm/drm_pci.c
index b28ca9cea8a..86a0f1c2209 100644
--- a/drivers/char/drm/drm_pci.c
+++ b/drivers/char/drm/drm_pci.c
@@ -37,6 +37,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include "drmP.h"
 
 /**********************************************************************/
diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c
index 68073e14fde..9a842a36bb2 100644
--- a/drivers/char/drm/drm_stub.c
+++ b/drivers/char/drm/drm_stub.c
@@ -229,8 +229,6 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 	return ret;
 }
 
-EXPORT_SYMBOL(drm_get_dev);
-
 /**
  * Put a device minor number.
  *
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index b108c7f913b..26bdf2ca59d 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -723,7 +723,7 @@ static int r300_scratch(drm_radeon_private_t *dev_priv,
 	
 	dev_priv->scratch_ages[header.scratch.reg]++;
 	
-	ref_age_base = *(u32 **)cmdbuf->buf;
+	ref_age_base =  (u32 *)(unsigned long)*((uint64_t *)cmdbuf->buf);
 	
 	cmdbuf->buf += sizeof(u64);
 	cmdbuf->bufsz -= sizeof(u64);
diff --git a/drivers/char/drm/via_irq.c b/drivers/char/drm/via_irq.c
index 6152415644e..c33d068cde1 100644
--- a/drivers/char/drm/via_irq.c
+++ b/drivers/char/drm/via_irq.c
@@ -196,9 +196,9 @@ via_driver_irq_wait(drm_device_t * dev, unsigned int irq, int force_sequence,
 {
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
 	unsigned int cur_irq_sequence;
-	drm_via_irq_t *cur_irq = dev_priv->via_irqs;
+	drm_via_irq_t *cur_irq;
 	int ret = 0;
-	maskarray_t *masks = dev_priv->irq_masks;
+	maskarray_t *masks;
 	int real_irq;
 
 	DRM_DEBUG("%s\n", __FUNCTION__);
@@ -221,8 +221,9 @@ via_driver_irq_wait(drm_device_t * dev, unsigned int irq, int force_sequence,
 			  __FUNCTION__, irq);
 		return DRM_ERR(EINVAL);
 	}
-	
-	cur_irq += real_irq;
+
+	masks = dev_priv->irq_masks;
+	cur_irq = dev_priv->via_irqs + real_irq;
 
 	if (masks[real_irq][2] && !force_sequence) {
 		DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * DRM_HZ,
@@ -247,11 +248,12 @@ void via_driver_irq_preinstall(drm_device_t * dev)
 {
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
 	u32 status;
-	drm_via_irq_t *cur_irq = dev_priv->via_irqs;
+	drm_via_irq_t *cur_irq;
 	int i;
 
 	DRM_DEBUG("driver_irq_preinstall: dev_priv: %p\n", dev_priv);
 	if (dev_priv) {
+		cur_irq = dev_priv->via_irqs;
 
 		dev_priv->irq_enable_mask = VIA_IRQ_VBLANK_ENABLE;
 		dev_priv->irq_pending_mask = VIA_IRQ_VBLANK_PENDING;
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
index d3a2bc36129..588fca542a9 100644
--- a/drivers/char/genrtc.c
+++ b/drivers/char/genrtc.c
@@ -200,13 +200,13 @@ static ssize_t gen_rtc_read(struct file *file, char __user *buf,
 	/* first test allows optimizer to nuke this case for 32-bit machines */
 	if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) {
 		unsigned int uidata = data;
-		retval = put_user(uidata, (unsigned long __user *)buf);
+		retval = put_user(uidata, (unsigned int __user *)buf) ?:
+			sizeof(unsigned int);
 	}
 	else {
-		retval = put_user(data, (unsigned long __user *)buf);
+		retval = put_user(data, (unsigned long __user *)buf) ?:
+			sizeof(unsigned long);
 	}
-	if (!retval)
-		retval = sizeof(unsigned long);
  out:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&gen_rtc_wait, &wait);
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 58dcdee1cd7..0030cd8e2e9 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -165,7 +165,7 @@ static int bt_start_transaction(struct si_sm_data *bt,
 {
 	unsigned int i;
 
-	if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH))
+	if ((size < 2) || (size > (IPMI_MAX_MSG_LENGTH - 2)))
 	       return -1;
 
 	if ((bt->state != BT_STATE_IDLE) && (bt->state != BT_STATE_HOSED))
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index a86c0f29953..02a7dd7a8a5 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1184,20 +1184,20 @@ static void port_outl(struct si_sm_io *io, unsigned int offset,
 static void port_cleanup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (addr) {
-		mapsize = ((info->io_size * info->io.regspacing)
-			   - (info->io.regspacing - info->io.regsize));
-
-		release_region (addr, mapsize);
+	  	for (idx = 0; idx < info->io_size; idx++) {
+			release_region(addr + idx * info->io.regspacing,
+				       info->io.regsize);
+		}
 	}
 }
 
 static int port_setup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (!addr)
 		return -ENODEV;
@@ -1225,16 +1225,22 @@ static int port_setup(struct smi_info *info)
 		return -EINVAL;
 	}
 
-	/* Calculate the total amount of memory to claim.  This is an
-	 * unusual looking calculation, but it avoids claiming any
-	 * more memory than it has to.  It will claim everything
-	 * between the first address to the end of the last full
-	 * register. */
-	mapsize = ((info->io_size * info->io.regspacing)
-		   - (info->io.regspacing - info->io.regsize));
-
-	if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
-		return -EIO;
+	/* Some BIOSes reserve disjoint I/O regions in their ACPI
+	 * tables.  This causes problems when trying to register the
+	 * entire I/O region.  Therefore we must register each I/O
+	 * port separately.
+	 */
+  	for (idx = 0; idx < info->io_size; idx++) {
+		if (request_region(addr + idx * info->io.regspacing,
+				   info->io.regsize, DEVICE_NAME) == NULL) {
+			/* Undo allocations */
+			while (idx--) {
+				release_region(addr + idx * info->io.regspacing,
+					       info->io.regsize);
+			}
+			return -EIO;
+		}
+	}
 	return 0;
 }
 
@@ -2198,11 +2204,11 @@ static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
 	}
 }
 
-static struct ipmi_default_vals
+static __devinitdata struct ipmi_default_vals
 {
 	int type;
 	int port;
-} __devinit ipmi_defaults[] =
+} ipmi_defaults[] =
 {
 	{ .type = SI_KCS, .port = 0xca2 },
 	{ .type = SI_SMIC, .port = 0xca9 },
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 935670a3cd9..5755b7e5f18 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -860,9 +860,32 @@ static void k_slock(struct vc_data *vc, unsigned char value, char up_flag, struc
 }
 
 /* by default, 300ms interval for combination release */
-static long brl_timeout = 300;
-MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for combination on first release, < 0 for dead characters)");
-module_param(brl_timeout, long, 0644);
+static unsigned brl_timeout = 300;
+MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for commit on first key release)");
+module_param(brl_timeout, uint, 0644);
+
+static unsigned brl_nbchords = 1;
+MODULE_PARM_DESC(brl_nbchords, "Number of chords that produce a braille pattern (0 for dead chords)");
+module_param(brl_nbchords, uint, 0644);
+
+static void k_brlcommit(struct vc_data *vc, unsigned int pattern, char up_flag, struct pt_regs *regs)
+{
+	static unsigned long chords;
+	static unsigned committed;
+
+	if (!brl_nbchords)
+		k_deadunicode(vc, BRL_UC_ROW | pattern, up_flag, regs);
+	else {
+		committed |= pattern;
+		chords++;
+		if (chords == brl_nbchords) {
+			k_unicode(vc, BRL_UC_ROW | committed, up_flag, regs);
+			chords = 0;
+			committed = 0;
+		}
+	}
+}
+
 static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct pt_regs *regs)
 {
 	static unsigned pressed,committing;
@@ -882,11 +905,6 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 	if (value > 8)
 		return;
 
-	if (brl_timeout < 0) {
-		k_deadunicode(vc, BRL_UC_ROW | (1 << (value - 1)), up_flag, regs);
-		return;
-	}
-
 	if (up_flag) {
 		if (brl_timeout) {
 			if (!committing ||
@@ -897,13 +915,13 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 			pressed &= ~(1 << (value - 1));
 			if (!pressed) {
 				if (committing) {
-					k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+					k_brlcommit(vc, committing, 0, regs);
 					committing = 0;
 				}
 			}
 		} else {
 			if (committing) {
-				k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+				k_brlcommit(vc, committing, 0, regs);
 				committing = 0;
 			}
 			pressed &= ~(1 << (value - 1));
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 66719f9d294..1fa9fa157c1 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -27,6 +27,7 @@
 #include <linux/crash_dump.h>
 #include <linux/backing-dev.h>
 #include <linux/bootmem.h>
+#include <linux/pipe_fs_i.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -578,6 +579,18 @@ static ssize_t write_null(struct file * file, const char __user * buf,
 	return count;
 }
 
+static int pipe_to_null(struct pipe_inode_info *info, struct pipe_buffer *buf,
+			struct splice_desc *sd)
+{
+	return sd->len;
+}
+
+static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out,
+				 loff_t *ppos, size_t len, unsigned int flags)
+{
+	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null);
+}
+
 #ifdef CONFIG_MMU
 /*
  * For fun, we are using the MMU for this.
@@ -785,6 +798,7 @@ static struct file_operations null_fops = {
 	.llseek		= null_lseek,
 	.read		= read_null,
 	.write		= write_null,
+	.splice_write	= splice_write_null,
 };
 
 #if defined(CONFIG_ISA) || !defined(__mc68000__)
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 8666171e187..d3ba2f860ef 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -271,7 +271,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				ipcnum,
 				pDrvData->IPCs[ipcnum].usIntCount);
 	
-			if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) {
+			if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
 				PRINTK_ERROR(KERN_ERR_MWAVE
 						"mwavedd::mwave_ioctl:"
 						" IOCTL_MW_REGISTER_IPC:"
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 02114a0bd0d..eab5394da66 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -149,7 +149,7 @@ struct cm4000_dev {
 #define	ZERO_DEV(dev)  						\
 	memset(&dev->atr_csum,0,				\
 		sizeof(struct cm4000_dev) - 			\
-		/*link*/ sizeof(struct pcmcia_device) - 	\
+		/*link*/ sizeof(struct pcmcia_device *) - 	\
 		/*node*/ sizeof(dev_node_t) - 			\
 		/*atr*/ MAX_ATR*sizeof(char) - 			\
 		/*rbuf*/ 512*sizeof(char) - 			\
@@ -1981,10 +1981,6 @@ static int __init cmm_init(void)
 	if (!cmm_class)
 		return -1;
 
-	rc = pcmcia_register_driver(&cm4000_driver);
-	if (rc < 0)
-		return rc;
-
 	major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
@@ -1992,6 +1988,12 @@ static int __init cmm_init(void)
 		return -1;
 	}
 
+	rc = pcmcia_register_driver(&cm4000_driver);
+	if (rc < 0) {
+		unregister_chrdev(major, DEVICE_NAME);
+		return rc;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 29efa64580a..47a8465bf95 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -724,16 +724,19 @@ static int __init cm4040_init(void)
 	if (!cmx_class)
 		return -1;
 
-	rc = pcmcia_register_driver(&reader_driver);
-	if (rc < 0)
-		return rc;
-
 	major = register_chrdev(0, DEVICE_NAME, &reader_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
 			": could not get major number\n");
 		return -1;
 	}
+
+	rc = pcmcia_register_driver(&reader_driver);
+	if (rc < 0) {
+		unregister_chrdev(major, DEVICE_NAME);
+		return rc;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h
index 3ec73d1a279..179cdbea712 100644
--- a/drivers/char/rio/host.h
+++ b/drivers/char/rio/host.h
@@ -33,12 +33,6 @@
 #ifndef __rio_host_h__
 #define __rio_host_h__
 
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_host_h_sccs_ = "@(#)host.h	1.2";
-#endif
-#endif
-
 /*
 ** the host structure - one per host card in the system.
 */
@@ -77,9 +71,6 @@ struct Host {
 #define RC_STARTUP            1
 #define RC_RUNNING            2
 #define RC_STUFFED            3
-#define RC_SOMETHING          4
-#define RC_SOMETHING_NEW      5
-#define RC_SOMETHING_ELSE     6
 #define RC_READY              7
 #define RUN_STATE             7
 /*
diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c
index acda9326c2e..290143addd3 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <linux/termios.h>
 #include <linux/serial.h>
+#include <linux/vmalloc.h>
 #include <asm/semaphore.h>
 #include <linux/generic_serial.h>
 #include <linux/errno.h>
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index d31aba62bb7..75b2557c37e 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -1394,14 +1394,17 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		return RIO_FAIL;
 	}
 
-	if (((int) ((char) PortP->InUse) == -1) || !(CmdBlkP = RIOGetCmdBlk())) {
-		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block for command %d on port %d\n", Cmd, PortP->PortNum);
+	if ((PortP->InUse == (typeof(PortP->InUse))-1) ||
+			!(CmdBlkP = RIOGetCmdBlk())) {
+		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block "
+			"for command %d on port %d\n", Cmd, PortP->PortNum);
 		return RIO_FAIL;
 	}
 
-	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", CmdBlkP, PortP->InUse);
+	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n",
+			CmdBlkP, PortP->InUse);
 
-	PktCmdP = (struct PktCmd_M *) &CmdBlkP->Packet.data[0];
+	PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0];
 
 	CmdBlkP->Packet.src_unit = 0;
 	if (PortP->SecondBlock)
@@ -1425,38 +1428,46 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 
 	switch (Cmd) {
 	case MEMDUMP:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p (addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
+				"(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
 		PktCmdP->SubCommand = MEMDUMP;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case FCLOSE:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
+				CmdBlkP);
 		break;
 	case READ_REGISTER:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
+				"command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
 		PktCmdP->SubCommand = READ_REGISTER;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case RESUME:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
+				CmdBlkP);
 		break;
 	case RFLUSH:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
+				CmdBlkP);
 		CmdBlkP->PostFuncP = RIORFlushEnable;
 		break;
 	case SUSPEND:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MGET:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MSET:
 	case MBIC:
 	case MBIS:
 		CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
+				"blk %p\n", CmdBlkP);
 		break;
 
 	case WFLUSH:
@@ -1465,12 +1476,14 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		 ** allowed then we should not bother sending any more to the
 		 ** RTA.
 		 */
-		if ((int) ((char) PortP->WflushFlag) == (int) -1) {
-			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, WflushFlag about to wrap!");
+		if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) {
+			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, "
+					"WflushFlag about to wrap!");
 			RIOFreeCmdBlk(CmdBlkP);
 			return (RIO_FAIL);
 		} else {
-			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command blk %p\n", CmdBlkP);
+			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command "
+					"blk %p\n", CmdBlkP);
 			CmdBlkP->PostFuncP = RIOWFlushMark;
 		}
 		break;
diff --git a/drivers/char/rio/rioioctl.h b/drivers/char/rio/rioioctl.h
index 14b83fae75c..e8af5b30519 100644
--- a/drivers/char/rio/rioioctl.h
+++ b/drivers/char/rio/rioioctl.h
@@ -33,10 +33,6 @@
 #ifndef	__rioioctl_h__
 #define	__rioioctl_h__
 
-#ifdef SCCS_LABELS
-static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
-#endif
-
 /*
 ** RIO device driver - user ioctls and associated structures.
 */
@@ -44,55 +40,13 @@ static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
 struct portStats {
 	int port;
 	int gather;
-	ulong txchars;
-	ulong rxchars;
-	ulong opens;
-	ulong closes;
-	ulong ioctls;
+	unsigned long txchars;
+	unsigned long rxchars;
+	unsigned long opens;
+	unsigned long closes;
+	unsigned long ioctls;
 };
 
-
-#define rIOC	('r'<<8)
-#define	TCRIOSTATE	(rIOC | 1)
-#define	TCRIOXPON	(rIOC | 2)
-#define	TCRIOXPOFF	(rIOC | 3)
-#define	TCRIOXPCPS	(rIOC | 4)
-#define	TCRIOXPRINT	(rIOC | 5)
-#define TCRIOIXANYON	(rIOC | 6)
-#define	TCRIOIXANYOFF	(rIOC | 7)
-#define TCRIOIXONON	(rIOC | 8)
-#define	TCRIOIXONOFF	(rIOC | 9)
-#define	TCRIOMBIS	(rIOC | 10)
-#define	TCRIOMBIC	(rIOC | 11)
-#define	TCRIOTRIAD	(rIOC | 12)
-#define TCRIOTSTATE	(rIOC | 13)
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** Add RIO ioctls for manipulating RTS and CTS flow control, (as LynxOS
-** appears to not support hardware flow control).
-*/
-#define TCRIOCTSFLOWEN	(rIOC | 14)	/* enable CTS flow control */
-#define TCRIOCTSFLOWDIS	(rIOC | 15)	/* disable CTS flow control */
-#define TCRIORTSFLOWEN	(rIOC | 16)	/* enable RTS flow control */
-#define TCRIORTSFLOWDIS	(rIOC | 17)	/* disable RTS flow control */
-
-/*
-** 09.12.1998 ARG - ESIL 0776 part fix
-** Definition for 'RIOC' also appears in daemon.h, so we'd better do a
-** #ifndef here first.
-** 'RIO_QUICK_CHECK' also #define'd here as this ioctl is now
-** allowed to be used by customers.
-**
-** 05.02.1999 ARG -
-** This is what I've decied to do with ioctls etc., which are intended to be
-** invoked from users applications :
-** Anything that needs to be defined here will be removed from daemon.h, that
-** way it won't end up having to be defined/maintained in two places. The only
-** consequence of this is that this file should now be #include'd by daemon.h
-**
-** 'stats' ioctls now #define'd here as they are to be used by customers.
-*/
 #define	RIOC	('R'<<8)|('i'<<16)|('o'<<24)
 
 #define	RIO_QUICK_CHECK	  	(RIOC | 105)
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index b543821d8cb..56c8243cdb7 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -390,7 +390,8 @@ scdrv_init(void)
 			format_module_id(devnamep, geo_module(geoid),
 					 MODULE_FORMAT_BRIEF);
 			devnamep = devname + strlen(devname);
-			sprintf(devnamep, "#%d", geo_slab(geoid));
+			sprintf(devnamep, "^%d#%d", geo_slot(geoid),
+				geo_slab(geoid));
 
 			/* allocate sysctl device data */
 			scd = kzalloc(sizeof (struct sysctl_data_s),
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index f8dd8527c6a..a90f5d97df3 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1341,6 +1341,9 @@ static int __devinit sonypi_probe(struct platform_device *dev)
 	else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 					  PCI_DEVICE_ID_INTEL_ICH6_1, NULL)))
 		sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE3;
+	else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					  PCI_DEVICE_ID_INTEL_ICH7_1, NULL)))
+		sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE3;
 	else
 		sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE2;
 
diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c
index eb2eb3e12d6..079db5a935a 100644
--- a/drivers/char/tipar.c
+++ b/drivers/char/tipar.c
@@ -515,7 +515,7 @@ tipar_init_module(void)
 		err = PTR_ERR(tipar_class);
 		goto out_chrdev;
 	}
-	if (parport_register_driver(&tipar_driver) || tp_count == 0) {
+	if (parport_register_driver(&tipar_driver)) {
 		printk(KERN_ERR "tipar: unable to register with parport\n");
 		err = -EIO;
 		goto out_class;
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index a6873bf89ff..fe00c7dfb64 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -20,9 +20,18 @@ config TCG_TPM
 	  Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
 	  and CONFIG_PNPACPI.
 
+config TCG_TIS
+	tristate "TPM Interface Specification 1.2 Interface"
+	depends on TCG_TPM && PNPACPI
+	---help---
+	  If you have a TPM security chip that is compliant with the
+	  TCG TIS 1.2 TPM specification say Yes and it will be accessible
+	  from within Linux.  To compile this driver as a module, choose
+	  M here; the module will be called tpm_tis.
+
 config TCG_NSC
 	tristate "National Semiconductor TPM Interface"
-	depends on TCG_TPM
+	depends on TCG_TPM && PNPACPI
 	---help---
 	  If you have a TPM security chip from National Semicondutor 
 	  say Yes and it will be accessible from within Linux.  To 
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index ba4582d160f..ea3a1e02a82 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_TCG_TPM) += tpm.o
 ifdef CONFIG_ACPI
 	obj-$(CONFIG_TCG_TPM) += tpm_bios.o
 endif
+obj-$(CONFIG_TCG_TIS) += tpm_tis.o
 obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
 obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
 obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 5a3870477ef..6889e7db3af 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -32,12 +32,291 @@ enum tpm_const {
 	TPM_MINOR = 224,	/* officially assigned */
 	TPM_BUFSIZE = 2048,
 	TPM_NUM_DEVICES = 256,
-	TPM_NUM_MASK_ENTRIES = TPM_NUM_DEVICES / (8 * sizeof(int))
 };
 
+enum tpm_duration {
+	TPM_SHORT = 0,
+	TPM_MEDIUM = 1,
+	TPM_LONG = 2,
+	TPM_UNDEFINED,
+};
+
+#define TPM_MAX_ORDINAL 243
+#define TPM_MAX_PROTECTED_ORDINAL 12
+#define TPM_PROTECTED_ORDINAL_MASK 0xFF
+
 static LIST_HEAD(tpm_chip_list);
 static DEFINE_SPINLOCK(driver_lock);
-static int dev_mask[TPM_NUM_MASK_ENTRIES];
+static DECLARE_BITMAP(dev_mask, TPM_NUM_DEVICES);
+
+/*
+ * Array with one entry per ordinal defining the maximum amount
+ * of time the chip could take to return the result.  The ordinal
+ * designation of short, medium or long is defined in a table in
+ * TCG Specification TPM Main Part 2 TPM Structures Section 17. The
+ * values of the SHORT, MEDIUM, and LONG durations are retrieved
+ * from the chip during initialization with a call to tpm_get_timeouts.
+ */
+static const u8 tpm_protected_ordinal_duration[TPM_MAX_PROTECTED_ORDINAL] = {
+	TPM_UNDEFINED,		/* 0 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 5 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 10 */
+	TPM_SHORT,
+};
+
+static const u8 tpm_ordinal_duration[TPM_MAX_ORDINAL] = {
+	TPM_UNDEFINED,		/* 0 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 5 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 10 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_LONG,
+	TPM_LONG,
+	TPM_MEDIUM,		/* 15 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_LONG,
+	TPM_SHORT,		/* 20 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_SHORT,		/* 25 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,		/* 30 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 35 */
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 40 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 45 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_LONG,
+	TPM_MEDIUM,		/* 50 */
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 55 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 60 */
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,		/* 65 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 70 */
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 75 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_LONG,		/* 80 */
+	TPM_UNDEFINED,
+	TPM_MEDIUM,
+	TPM_LONG,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 85 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 90 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 95 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 100 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 105 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 110 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 115 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_LONG,		/* 120 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_SHORT,		/* 125 */
+	TPM_SHORT,
+	TPM_LONG,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 130 */
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,		/* 135 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 140 */
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 145 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 150 */
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 155 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 160 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 165 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_LONG,		/* 170 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 175 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 180 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,		/* 185 */
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 190 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 195 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 200 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_SHORT,		/* 205 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,		/* 210 */
+	TPM_UNDEFINED,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,		/* 215 */
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_SHORT,		/* 220 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 225 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 230 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 235 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 240 */
+	TPM_UNDEFINED,
+	TPM_MEDIUM,
+};
 
 static void user_reader_timeout(unsigned long ptr)
 {
@@ -46,7 +325,7 @@ static void user_reader_timeout(unsigned long ptr)
 	schedule_work(&chip->work);
 }
 
-static void timeout_work(void * ptr)
+static void timeout_work(void *ptr)
 {
 	struct tpm_chip *chip = ptr;
 
@@ -57,17 +336,43 @@ static void timeout_work(void * ptr)
 }
 
 /*
+ * Returns max number of jiffies to wait
+ */
+unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip,
+					   u32 ordinal)
+{
+	int duration_idx = TPM_UNDEFINED;
+	int duration = 0;
+
+	if (ordinal < TPM_MAX_ORDINAL)
+		duration_idx = tpm_ordinal_duration[ordinal];
+	else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) <
+		 TPM_MAX_PROTECTED_ORDINAL)
+		duration_idx =
+		    tpm_protected_ordinal_duration[ordinal &
+						   TPM_PROTECTED_ORDINAL_MASK];
+
+	if (duration_idx != TPM_UNDEFINED)
+		duration = chip->vendor.duration[duration_idx];
+	if (duration <= 0)
+		return 2 * 60 * HZ;
+	else
+		return duration;
+}
+EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
+
+/*
  * Internal kernel interface to transmit TPM commands
  */
 static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
 			    size_t bufsiz)
 {
 	ssize_t rc;
-	u32 count;
+	u32 count, ordinal;
 	unsigned long stop;
 
 	count = be32_to_cpu(*((__be32 *) (buf + 2)));
-
+	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
 	if (count == 0)
 		return -ENODATA;
 	if (count > bufsiz) {
@@ -78,21 +383,23 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
 
 	down(&chip->tpm_mutex);
 
-	if ((rc = chip->vendor->send(chip, (u8 *) buf, count)) < 0) {
+	if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) {
 		dev_err(chip->dev,
 			"tpm_transmit: tpm_send: error %zd\n", rc);
 		goto out;
 	}
 
-	stop = jiffies + 2 * 60 * HZ;
+	if (chip->vendor.irq)
+		goto out_recv;
+
+	stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
 	do {
-		u8 status = chip->vendor->status(chip);
-		if ((status & chip->vendor->req_complete_mask) ==
-		    chip->vendor->req_complete_val) {
+		u8 status = chip->vendor.status(chip);
+		if ((status & chip->vendor.req_complete_mask) ==
+		    chip->vendor.req_complete_val)
 			goto out_recv;
-		}
 
-		if ((status == chip->vendor->req_canceled)) {
+		if ((status == chip->vendor.req_canceled)) {
 			dev_err(chip->dev, "Operation Canceled\n");
 			rc = -ECANCELED;
 			goto out;
@@ -102,14 +409,13 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
 		rmb();
 	} while (time_before(jiffies, stop));
 
-
-	chip->vendor->cancel(chip);
+	chip->vendor.cancel(chip);
 	dev_err(chip->dev, "Operation Timed out\n");
 	rc = -ETIME;
 	goto out;
 
 out_recv:
-	rc = chip->vendor->recv(chip, (u8 *) buf, bufsiz);
+	rc = chip->vendor.recv(chip, (u8 *) buf, bufsiz);
 	if (rc < 0)
 		dev_err(chip->dev,
 			"tpm_transmit: tpm_recv: error %zd\n", rc);
@@ -119,17 +425,247 @@ out:
 }
 
 #define TPM_DIGEST_SIZE 20
-#define CAP_PCR_RESULT_SIZE 18
-static const u8 cap_pcr[] = {
+#define TPM_ERROR_SIZE 10
+#define TPM_RET_CODE_IDX 6
+#define TPM_GET_CAP_RET_SIZE_IDX 10
+#define TPM_GET_CAP_RET_UINT32_1_IDX 14
+#define TPM_GET_CAP_RET_UINT32_2_IDX 18
+#define TPM_GET_CAP_RET_UINT32_3_IDX 22
+#define TPM_GET_CAP_RET_UINT32_4_IDX 26
+#define TPM_GET_CAP_PERM_DISABLE_IDX 16
+#define TPM_GET_CAP_PERM_INACTIVE_IDX 18
+#define TPM_GET_CAP_RET_BOOL_1_IDX 14
+#define TPM_GET_CAP_TEMP_INACTIVE_IDX 16
+
+#define TPM_CAP_IDX 13
+#define TPM_CAP_SUBCAP_IDX 21
+
+enum tpm_capabilities {
+	TPM_CAP_FLAG = 4,
+	TPM_CAP_PROP = 5,
+};
+
+enum tpm_sub_capabilities {
+	TPM_CAP_PROP_PCR = 0x1,
+	TPM_CAP_PROP_MANUFACTURER = 0x3,
+	TPM_CAP_FLAG_PERM = 0x8,
+	TPM_CAP_FLAG_VOL = 0x9,
+	TPM_CAP_PROP_OWNER = 0x11,
+	TPM_CAP_PROP_TIS_TIMEOUT = 0x15,
+	TPM_CAP_PROP_TIS_DURATION = 0x20,
+};
+
+/*
+ * This is a semi generic GetCapability command for use
+ * with the capability type TPM_CAP_PROP or TPM_CAP_FLAG
+ * and their associated sub_capabilities.
+ */
+
+static const u8 tpm_cap[] = {
 	0, 193,			/* TPM_TAG_RQU_COMMAND */
 	0, 0, 0, 22,		/* length */
 	0, 0, 0, 101,		/* TPM_ORD_GetCapability */
-	0, 0, 0, 5,
-	0, 0, 0, 4,
-	0, 0, 1, 1
+	0, 0, 0, 0,		/* TPM_CAP_<TYPE> */
+	0, 0, 0, 4,		/* TPM_CAP_SUB_<TYPE> size */
+	0, 0, 1, 0		/* TPM_CAP_SUB_<TYPE> */
 };
 
-#define READ_PCR_RESULT_SIZE 30
+static ssize_t transmit_cmd(struct tpm_chip *chip, u8 *data, int len,
+			    char *desc)
+{
+	int err;
+
+	len = tpm_transmit(chip, data, len);
+	if (len <  0)
+		return len;
+	if (len == TPM_ERROR_SIZE) {
+		err = be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX)));
+		dev_dbg(chip->dev, "A TPM error (%d) occurred %s\n", err, desc);
+		return err;
+	}
+	return 0;
+}
+
+void tpm_gen_interrupt(struct tpm_chip *chip)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)];
+	ssize_t rc;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the timeouts");
+}
+EXPORT_SYMBOL_GPL(tpm_gen_interrupt);
+
+void tpm_get_timeouts(struct tpm_chip *chip)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)];
+	ssize_t rc;
+	u32 timeout;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the timeouts");
+	if (rc)
+		goto duration;
+
+	if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX)))
+	    != 4 * sizeof(u32))
+		goto duration;
+
+	/* Don't overwrite default if value is 0 */
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX)));
+	if (timeout)
+		chip->vendor.timeout_a = msecs_to_jiffies(timeout);
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_2_IDX)));
+	if (timeout)
+		chip->vendor.timeout_b = msecs_to_jiffies(timeout);
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_3_IDX)));
+	if (timeout)
+		chip->vendor.timeout_c = msecs_to_jiffies(timeout);
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_4_IDX)));
+	if (timeout)
+		chip->vendor.timeout_d = msecs_to_jiffies(timeout);
+
+duration:
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_DURATION;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the durations");
+	if (rc)
+		return;
+
+	if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX)))
+	    != 3 * sizeof(u32))
+		return;
+
+	chip->vendor.duration[TPM_SHORT] =
+	    msecs_to_jiffies(be32_to_cpu
+			     (*((__be32 *) (data +
+					    TPM_GET_CAP_RET_UINT32_1_IDX))));
+	chip->vendor.duration[TPM_MEDIUM] =
+	    msecs_to_jiffies(be32_to_cpu
+			     (*((__be32 *) (data +
+					    TPM_GET_CAP_RET_UINT32_2_IDX))));
+	chip->vendor.duration[TPM_LONG] =
+	    msecs_to_jiffies(be32_to_cpu
+			     (*((__be32 *) (data +
+					    TPM_GET_CAP_RET_UINT32_3_IDX))));
+}
+EXPORT_SYMBOL_GPL(tpm_get_timeouts);
+
+void tpm_continue_selftest(struct tpm_chip *chip)
+{
+	u8 data[] = {
+		0, 193,			/* TPM_TAG_RQU_COMMAND */
+		0, 0, 0, 10,		/* length */
+		0, 0, 0, 83,		/* TPM_ORD_GetCapability */
+	};
+
+	tpm_transmit(chip, data, sizeof(data));
+}
+EXPORT_SYMBOL_GPL(tpm_continue_selftest);
+
+ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr,
+			char *buf)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attemtping to determine the permanent state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_enabled);
+
+ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr,
+			char *buf)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attemtping to determine the permanent state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_active);
+
+ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr,
+			char *buf)
+{
+	u8 data[sizeof(tpm_cap)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_OWNER;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the owner state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_owned);
+
+ssize_t tpm_show_temp_deactivated(struct device * dev,
+				struct device_attribute * attr, char *buf)
+{
+	u8 data[sizeof(tpm_cap)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_VOL;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the temporary state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated);
+
 static const u8 pcrread[] = {
 	0, 193,			/* TPM_TAG_RQU_COMMAND */
 	0, 0, 0, 14,		/* length */
@@ -140,8 +676,8 @@ static const u8 pcrread[] = {
 ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[READ_PCR_RESULT_SIZE];
-	ssize_t len;
+	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(pcrread)), 30)];
+	ssize_t rc;
 	int i, j, num_pcrs;
 	__be32 index;
 	char *str = buf;
@@ -150,29 +686,24 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return -ENODEV;
 
-	memcpy(data, cap_pcr, sizeof(cap_pcr));
-	if ((len = tpm_transmit(chip, data, sizeof(data)))
-	    < CAP_PCR_RESULT_SIZE) {
-		dev_dbg(chip->dev, "A TPM error (%d) occurred "
-				"attempting to determine the number of PCRS\n",
-			be32_to_cpu(*((__be32 *) (data + 6))));
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_PCR;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the number of PCRS");
+	if (rc)
 		return 0;
-	}
 
 	num_pcrs = be32_to_cpu(*((__be32 *) (data + 14)));
-
 	for (i = 0; i < num_pcrs; i++) {
 		memcpy(data, pcrread, sizeof(pcrread));
 		index = cpu_to_be32(i);
 		memcpy(data + 10, &index, 4);
-		if ((len = tpm_transmit(chip, data, sizeof(data)))
-		    < READ_PCR_RESULT_SIZE){
-			dev_dbg(chip->dev, "A TPM error (%d) occurred"
-				" attempting to read PCR %d of %d\n",
-				be32_to_cpu(*((__be32 *) (data + 6))),
-				i, num_pcrs);
+		rc = transmit_cmd(chip, data, sizeof(data),
+				"attempting to read a PCR");
+		if (rc)
 			goto out;
-		}
 		str += sprintf(str, "PCR-%02d: ", i);
 		for (j = 0; j < TPM_DIGEST_SIZE; j++)
 			str += sprintf(str, "%02X ", *(data + 10 + j));
@@ -194,7 +725,7 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr,
 		       char *buf)
 {
 	u8 *data;
-	ssize_t len;
+	ssize_t err;
 	int i, rc;
 	char *str = buf;
 
@@ -208,14 +739,10 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr,
 
 	memcpy(data, readpubek, sizeof(readpubek));
 
-	if ((len = tpm_transmit(chip, data, READ_PUBEK_RESULT_SIZE)) <
-	    READ_PUBEK_RESULT_SIZE) {
-		dev_dbg(chip->dev, "A TPM error (%d) occurred "
-				"attempting to read the PUBEK\n",
-			    be32_to_cpu(*((__be32 *) (data + 6))));
-		rc = 0;
+	err = transmit_cmd(chip, data, READ_PUBEK_RESULT_SIZE,
+			"attempting to read the PUBEK");
+	if (err)
 		goto out;
-	}
 
 	/* 
 	   ignore header 10 bytes
@@ -245,67 +772,110 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr,
 		if ((i + 1) % 16 == 0)
 			str += sprintf(str, "\n");
 	}
-	rc = str - buf;
 out:
+	rc = str - buf;
 	kfree(data);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_pubek);
 
-#define CAP_VER_RESULT_SIZE 18
+#define CAP_VERSION_1_1 6
+#define CAP_VERSION_1_2 0x1A
+#define CAP_VERSION_IDX 13
 static const u8 cap_version[] = {
 	0, 193,			/* TPM_TAG_RQU_COMMAND */
 	0, 0, 0, 18,		/* length */
 	0, 0, 0, 101,		/* TPM_ORD_GetCapability */
-	0, 0, 0, 6,
+	0, 0, 0, 0,
 	0, 0, 0, 0
 };
 
-#define CAP_MANUFACTURER_RESULT_SIZE 18
-static const u8 cap_manufacturer[] = {
-	0, 193,			/* TPM_TAG_RQU_COMMAND */
-	0, 0, 0, 22,		/* length */
-	0, 0, 0, 101,		/* TPM_ORD_GetCapability */
-	0, 0, 0, 5,
-	0, 0, 0, 4,
-	0, 0, 1, 3
-};
-
 ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[sizeof(cap_manufacturer)];
-	ssize_t len;
+	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	ssize_t rc;
 	char *str = buf;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
-	memcpy(data, cap_manufacturer, sizeof(cap_manufacturer));
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <
-	    CAP_MANUFACTURER_RESULT_SIZE)
-		return len;
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the manufacturer");
+	if (rc)
+		return 0;
 
 	str += sprintf(str, "Manufacturer: 0x%x\n",
-		       be32_to_cpu(*((__be32 *) (data + 14))));
+		       be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))));
 
 	memcpy(data, cap_version, sizeof(cap_version));
+	data[CAP_VERSION_IDX] = CAP_VERSION_1_1;
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the 1.1 version");
+	if (rc)
+		goto out;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <
-	    CAP_VER_RESULT_SIZE)
-		return len;
-
-	str +=
-	    sprintf(str, "TCG version: %d.%d\nFirmware version: %d.%d\n",
-		    (int) data[14], (int) data[15], (int) data[16],
-		    (int) data[17]);
+	str += sprintf(str,
+		       "TCG version: %d.%d\nFirmware version: %d.%d\n",
+		       (int) data[14], (int) data[15], (int) data[16],
+		       (int) data[17]);
 
+out:
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps);
 
+ssize_t tpm_show_caps_1_2(struct device * dev,
+			  struct device_attribute * attr, char *buf)
+{
+	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	ssize_t len;
+	char *str = buf;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
+
+	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
+	    TPM_ERROR_SIZE) {
+		dev_dbg(chip->dev, "A TPM error (%d) occurred "
+			"attempting to determine the manufacturer\n",
+			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
+		return 0;
+	}
+
+	str += sprintf(str, "Manufacturer: 0x%x\n",
+		       be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))));
+
+	memcpy(data, cap_version, sizeof(cap_version));
+	data[CAP_VERSION_IDX] = CAP_VERSION_1_2;
+
+	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
+	    TPM_ERROR_SIZE) {
+		dev_err(chip->dev, "A TPM error (%d) occurred "
+			"attempting to determine the 1.2 version\n",
+			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
+		goto out;
+	}
+	str += sprintf(str,
+		       "TCG version: %d.%d\nFirmware version: %d.%d\n",
+		       (int) data[16], (int) data[17], (int) data[18],
+		       (int) data[19]);
+
+out:
+	return str - buf;
+}
+EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
+
 ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
@@ -313,7 +883,7 @@ ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return 0;
 
-	chip->vendor->cancel(chip);
+	chip->vendor.cancel(chip);
 	return count;
 }
 EXPORT_SYMBOL_GPL(tpm_store_cancel);
@@ -329,7 +899,7 @@ int tpm_open(struct inode *inode, struct file *file)
 	spin_lock(&driver_lock);
 
 	list_for_each_entry(pos, &tpm_chip_list, list) {
-		if (pos->vendor->miscdev.minor == minor) {
+		if (pos->vendor.miscdev.minor == minor) {
 			chip = pos;
 			break;
 		}
@@ -387,7 +957,7 @@ int tpm_release(struct inode *inode, struct file *file)
 EXPORT_SYMBOL_GPL(tpm_release);
 
 ssize_t tpm_write(struct file *file, const char __user *buf,
-		  size_t size, loff_t * off)
+		  size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
 	int in_size = size, out_size;
@@ -419,11 +989,10 @@ ssize_t tpm_write(struct file *file, const char __user *buf,
 
 	return in_size;
 }
-
 EXPORT_SYMBOL_GPL(tpm_write);
 
-ssize_t tpm_read(struct file * file, char __user *buf,
-		 size_t size, loff_t * off)
+ssize_t tpm_read(struct file *file, char __user *buf,
+		 size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
 	int ret_size;
@@ -462,14 +1031,13 @@ void tpm_remove_hardware(struct device *dev)
 	spin_unlock(&driver_lock);
 
 	dev_set_drvdata(dev, NULL);
-	misc_deregister(&chip->vendor->miscdev);
-	kfree(chip->vendor->miscdev.name);
+	misc_deregister(&chip->vendor.miscdev);
+	kfree(chip->vendor.miscdev.name);
 
-	sysfs_remove_group(&dev->kobj, chip->vendor->attr_group);
+	sysfs_remove_group(&dev->kobj, chip->vendor.attr_group);
 	tpm_bios_log_teardown(chip->bios_dir);
 
-	dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &=
-		~(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES));
+	clear_bit(chip->dev_num, dev_mask);
 
 	kfree(chip);
 
@@ -520,18 +1088,18 @@ EXPORT_SYMBOL_GPL(tpm_pm_resume);
  * upon errant exit from this function specific probe function should call
  * pci_disable_device
  */
-int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry)
+struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vendor_specific
+				       *entry)
 {
 #define DEVNAME_SIZE 7
 
 	char *devname;
 	struct tpm_chip *chip;
-	int i, j;
 
 	/* Driver specific per-device data */
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
-		return -ENOMEM;
+		return NULL;
 
 	init_MUTEX(&chip->buffer_mutex);
 	init_MUTEX(&chip->tpm_mutex);
@@ -543,45 +1111,37 @@ int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry)
 	chip->user_read_timer.function = user_reader_timeout;
 	chip->user_read_timer.data = (unsigned long) chip;
 
-	chip->vendor = entry;
-
-	chip->dev_num = -1;
+	memcpy(&chip->vendor, entry, sizeof(struct tpm_vendor_specific));
 
-	for (i = 0; i < TPM_NUM_MASK_ENTRIES; i++)
-		for (j = 0; j < 8 * sizeof(int); j++)
-			if ((dev_mask[i] & (1 << j)) == 0) {
-				chip->dev_num =
-				    i * TPM_NUM_MASK_ENTRIES + j;
-				dev_mask[i] |= 1 << j;
-				goto dev_num_search_complete;
-			}
+	chip->dev_num = find_first_zero_bit(dev_mask, TPM_NUM_DEVICES);
 
-dev_num_search_complete:
-	if (chip->dev_num < 0) {
+	if (chip->dev_num >= TPM_NUM_DEVICES) {
 		dev_err(dev, "No available tpm device numbers\n");
 		kfree(chip);
-		return -ENODEV;
+		return NULL;
 	} else if (chip->dev_num == 0)
-		chip->vendor->miscdev.minor = TPM_MINOR;
+		chip->vendor.miscdev.minor = TPM_MINOR;
 	else
-		chip->vendor->miscdev.minor = MISC_DYNAMIC_MINOR;
+		chip->vendor.miscdev.minor = MISC_DYNAMIC_MINOR;
+
+	set_bit(chip->dev_num, dev_mask);
 
 	devname = kmalloc(DEVNAME_SIZE, GFP_KERNEL);
 	scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num);
-	chip->vendor->miscdev.name = devname;
+	chip->vendor.miscdev.name = devname;
 
-	chip->vendor->miscdev.dev = dev;
+	chip->vendor.miscdev.dev = dev;
 	chip->dev = get_device(dev);
 
-	if (misc_register(&chip->vendor->miscdev)) {
+	if (misc_register(&chip->vendor.miscdev)) {
 		dev_err(chip->dev,
 			"unable to misc_register %s, minor %d\n",
-			chip->vendor->miscdev.name,
-			chip->vendor->miscdev.minor);
+			chip->vendor.miscdev.name,
+			chip->vendor.miscdev.minor);
 		put_device(dev);
+		clear_bit(chip->dev_num, dev_mask);
 		kfree(chip);
-		dev_mask[i] &= !(1 << j);
-		return -ENODEV;
+		return NULL;
 	}
 
 	spin_lock(&driver_lock);
@@ -592,11 +1152,11 @@ dev_num_search_complete:
 
 	spin_unlock(&driver_lock);
 
-	sysfs_create_group(&dev->kobj, chip->vendor->attr_group);
+	sysfs_create_group(&dev->kobj, chip->vendor.attr_group);
 
 	chip->bios_dir = tpm_bios_log_setup(devname);
 
-	return 0;
+	return chip;
 }
 EXPORT_SYMBOL_GPL(tpm_register_hardware);
 
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index dec0224b447..050ced247f6 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -42,18 +42,30 @@ extern ssize_t tpm_show_pcrs(struct device *, struct device_attribute *attr,
 				char *);
 extern ssize_t tpm_show_caps(struct device *, struct device_attribute *attr,
 				char *);
+extern ssize_t tpm_show_caps_1_2(struct device *, struct device_attribute *attr,
+				char *);
 extern ssize_t tpm_store_cancel(struct device *, struct device_attribute *attr,
 				const char *, size_t);
+extern ssize_t tpm_show_enabled(struct device *, struct device_attribute *attr,
+				char *);
+extern ssize_t tpm_show_active(struct device *, struct device_attribute *attr,
+				char *);
+extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
+				char *);
+extern ssize_t tpm_show_temp_deactivated(struct device *,
+					 struct device_attribute *attr, char *);
 
 struct tpm_chip;
 
 struct tpm_vendor_specific {
-	u8 req_complete_mask;
-	u8 req_complete_val;
-	u8 req_canceled;
+	const u8 req_complete_mask;
+	const u8 req_complete_val;
+	const u8 req_canceled;
 	void __iomem *iobase;		/* ioremapped address */
 	unsigned long base;		/* TPM base address */
 
+	int irq;
+
 	int region_size;
 	int have_region;
 
@@ -63,6 +75,13 @@ struct tpm_vendor_specific {
 	u8 (*status) (struct tpm_chip *);
 	struct miscdevice miscdev;
 	struct attribute_group *attr_group;
+	struct list_head list;
+	int locality;
+	unsigned long timeout_a, timeout_b, timeout_c, timeout_d; /* jiffies */
+	unsigned long duration[3]; /* jiffies */
+
+	wait_queue_head_t read_queue;
+	wait_queue_head_t int_queue;
 };
 
 struct tpm_chip {
@@ -81,13 +100,15 @@ struct tpm_chip {
 	struct work_struct work;
 	struct semaphore tpm_mutex;	/* tpm is processing */
 
-	struct tpm_vendor_specific *vendor;
+	struct tpm_vendor_specific vendor;
 
 	struct dentry **bios_dir;
 
 	struct list_head list;
 };
 
+#define to_tpm_chip(n) container_of(n, struct tpm_chip, vendor)
+
 static inline int tpm_read_index(int base, int index)
 {
 	outb(index, base);
@@ -100,8 +121,12 @@ static inline void tpm_write_index(int base, int index, int value)
 	outb(value & 0xFF, base+1);
 }
 
-extern int tpm_register_hardware(struct device *,
-				 struct tpm_vendor_specific *);
+extern void tpm_get_timeouts(struct tpm_chip *);
+extern void tpm_gen_interrupt(struct tpm_chip *);
+extern void tpm_continue_selftest(struct tpm_chip *);
+extern unsigned long tpm_calc_ordinal_duration(struct tpm_chip *, u32);
+extern struct tpm_chip* tpm_register_hardware(struct device *,
+				 const struct tpm_vendor_specific *);
 extern int tpm_open(struct inode *, struct file *);
 extern int tpm_release(struct inode *, struct file *);
 extern ssize_t tpm_write(struct file *, const char __user *, size_t,
@@ -115,7 +140,7 @@ extern int tpm_pm_resume(struct device *);
 extern struct dentry ** tpm_bios_log_setup(char *);
 extern void tpm_bios_log_teardown(struct dentry **);
 #else
-static inline struct dentry* tpm_bios_log_setup(char *name)
+static inline struct dentry ** tpm_bios_log_setup(char *name)
 {
 	return NULL;
 }
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index ff3654964fe..58a258cec15 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -47,12 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		return -EIO;
 
 	for (i = 0; i < 6; i++) {
-		status = ioread8(chip->vendor->iobase + 1);
+		status = ioread8(chip->vendor.iobase + 1);
 		if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 			dev_err(chip->dev, "error reading header\n");
 			return -EIO;
 		}
-		*buf++ = ioread8(chip->vendor->iobase);
+		*buf++ = ioread8(chip->vendor.iobase);
 	}
 
 	/* size of the data received */
@@ -63,7 +63,7 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		dev_err(chip->dev,
 			"Recv size(%d) less than available space\n", size);
 		for (; i < size; i++) {	/* clear the waiting data anyway */
-			status = ioread8(chip->vendor->iobase + 1);
+			status = ioread8(chip->vendor.iobase + 1);
 			if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 				dev_err(chip->dev, "error reading data\n");
 				return -EIO;
@@ -74,16 +74,16 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 
 	/* read all the data available */
 	for (; i < size; i++) {
-		status = ioread8(chip->vendor->iobase + 1);
+		status = ioread8(chip->vendor.iobase + 1);
 		if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 			dev_err(chip->dev, "error reading data\n");
 			return -EIO;
 		}
-		*buf++ = ioread8(chip->vendor->iobase);
+		*buf++ = ioread8(chip->vendor.iobase);
 	}
 
 	/* make sure data available is gone */
-	status = ioread8(chip->vendor->iobase + 1);
+	status = ioread8(chip->vendor.iobase + 1);
 
 	if (status & ATML_STATUS_DATA_AVAIL) {
 		dev_err(chip->dev, "data available is stuck\n");
@@ -100,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
 	dev_dbg(chip->dev, "tpm_atml_send:\n");
 	for (i = 0; i < count; i++) {
 		dev_dbg(chip->dev, "%d 0x%x(%d)\n",  i, buf[i], buf[i]);
- 		iowrite8(buf[i], chip->vendor->iobase);
+ 		iowrite8(buf[i], chip->vendor.iobase);
 	}
 
 	return count;
@@ -108,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
 
 static void tpm_atml_cancel(struct tpm_chip *chip)
 {
-	iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1);
+	iowrite8(ATML_STATUS_ABORT, chip->vendor.iobase + 1);
 }
 
 static u8 tpm_atml_status(struct tpm_chip *chip)
 {
-	return ioread8(chip->vendor->iobase + 1);
+	return ioread8(chip->vendor.iobase + 1);
 }
 
 static struct file_operations atmel_ops = {
@@ -140,7 +140,7 @@ static struct attribute* atmel_attrs[] = {
 
 static struct attribute_group atmel_attr_grp = { .attrs = atmel_attrs };
 
-static struct tpm_vendor_specific tpm_atmel = {
+static const struct tpm_vendor_specific tpm_atmel = {
 	.recv = tpm_atml_recv,
 	.send = tpm_atml_send,
 	.cancel = tpm_atml_cancel,
@@ -159,10 +159,10 @@ static void atml_plat_remove(void)
 	struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);
 
 	if (chip) {
-		if (chip->vendor->have_region)
-			atmel_release_region(chip->vendor->base,
-					     chip->vendor->region_size);
-		atmel_put_base_addr(chip->vendor);
+		if (chip->vendor.have_region)
+			atmel_release_region(chip->vendor.base,
+					     chip->vendor.region_size);
+		atmel_put_base_addr(chip->vendor.iobase);
 		tpm_remove_hardware(chip->dev);
 		platform_device_unregister(pdev);
 	}
@@ -179,18 +179,22 @@ static struct device_driver atml_drv = {
 static int __init init_atmel(void)
 {
 	int rc = 0;
+	void __iomem *iobase = NULL;
+	int have_region, region_size;
+	unsigned long base;
+	struct  tpm_chip *chip;
 
 	driver_register(&atml_drv);
 
-	if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) {
+	if ((iobase = atmel_get_base_addr(&base, &region_size)) == NULL) {
 		rc = -ENODEV;
 		goto err_unreg_drv;
 	}
 
-	tpm_atmel.have_region =
+	have_region =
 	    (atmel_request_region
-	     (tpm_atmel.base, tpm_atmel.region_size,
-	      "tpm_atmel0") == NULL) ? 0 : 1;
+	     (tpm_atmel.base, region_size, "tpm_atmel0") == NULL) ? 0 : 1;
+
 
 	if (IS_ERR
 	    (pdev =
@@ -199,17 +203,25 @@ static int __init init_atmel(void)
 		goto err_rel_reg;
 	}
 
-	if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0)
+	if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_atmel))) {
+		rc = -ENODEV;
 		goto err_unreg_dev;
+	}
+
+	chip->vendor.iobase = iobase;
+	chip->vendor.base = base;
+	chip->vendor.have_region = have_region;
+	chip->vendor.region_size = region_size;
+
 	return 0;
 
 err_unreg_dev:
 	platform_device_unregister(pdev);
 err_rel_reg:
-	atmel_put_base_addr(&tpm_atmel);
-	if (tpm_atmel.have_region)
-		atmel_release_region(tpm_atmel.base,
-				     tpm_atmel.region_size);
+	atmel_put_base_addr(iobase);
+	if (have_region)
+		atmel_release_region(base,
+				     region_size);
 err_unreg_drv:
 	driver_unregister(&atml_drv);
 	return rc;
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index d3478aaadd7..2e68eeb8a2c 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -28,13 +28,12 @@
 #define atmel_request_region request_mem_region
 #define atmel_release_region release_mem_region
 
-static inline void atmel_put_base_addr(struct tpm_vendor_specific
-					 *vendor)
+static inline void atmel_put_base_addr(void __iomem *iobase)
 {
-	iounmap(vendor->iobase);
+	iounmap(iobase);
 }
 
-static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
+static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
 {
 	struct device_node *dn;
 	unsigned long address, size;
@@ -71,9 +70,9 @@ static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
 	else
 		size = reg[naddrc];
 
-	vendor->base = address;
-	vendor->region_size = size;
-	return ioremap(vendor->base, vendor->region_size);
+	*base = address;
+	*region_size = size;
+	return ioremap(*base, *region_size);
 }
 #else
 #define atmel_getb(chip, offset) inb(chip->vendor->base + offset)
@@ -106,14 +105,12 @@ static int atmel_verify_tpm11(void)
 	return 0;
 }
 
-static inline void atmel_put_base_addr(struct tpm_vendor_specific
-					 *vendor)
+static inline void atmel_put_base_addr(void __iomem *iobase)
 {
 }
 
 /* Determine where to talk to device */
-static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
-					 *vendor)
+static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
 {
 	int lo, hi;
 
@@ -123,9 +120,9 @@ static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
 	lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
 	hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
 
-	vendor->base = (hi << 8) | lo;
-	vendor->region_size = 2;
+	*base = (hi << 8) | lo;
+	*region_size = 2;
 
-	return ioport_map(vendor->base, vendor->region_size);
+	return ioport_map(*base, *region_size);
 }
 #endif
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index 537aa45d8c6..a611972024e 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -29,6 +29,11 @@
 #define MAX_TEXT_EVENT		1000	/* Max event string length */
 #define ACPI_TCPA_SIG		"TCPA"	/* 0x41504354 /'TCPA' */
 
+enum bios_platform_class {
+	BIOS_CLIENT = 0x00,
+	BIOS_SERVER = 0x01,
+};
+
 struct tpm_bios_log {
 	void *bios_event_log;
 	void *bios_event_log_end;
@@ -36,9 +41,18 @@ struct tpm_bios_log {
 
 struct acpi_tcpa {
 	struct acpi_table_header hdr;
-	u16 reserved;
-	u32 log_max_len __attribute__ ((packed));
-	u32 log_start_addr __attribute__ ((packed));
+	u16 platform_class;
+	union {
+		struct client_hdr {
+			u32 log_max_len __attribute__ ((packed));
+			u64 log_start_addr __attribute__ ((packed));
+		} client;
+		struct server_hdr {
+			u16 reserved;
+			u64 log_max_len __attribute__ ((packed));
+			u64 log_start_addr __attribute__ ((packed));
+		} server;
+	};
 };
 
 struct tcpa_event {
@@ -91,6 +105,12 @@ static const char* tcpa_event_type_strings[] = {
 	"Non-Host Info"
 };
 
+struct tcpa_pc_event {
+	u32 event_id;
+	u32 event_size;
+	u8 event_data[0];
+};
+
 enum tcpa_pc_event_ids {
 	SMBIOS = 1,
 	BIS_CERT,
@@ -100,14 +120,15 @@ enum tcpa_pc_event_ids {
 	NVRAM,
 	OPTION_ROM_EXEC,
 	OPTION_ROM_CONFIG,
-	OPTION_ROM_MICROCODE,
+	OPTION_ROM_MICROCODE = 10,
 	S_CRTM_VERSION,
 	S_CRTM_CONTENTS,
 	POST_CONTENTS,
+	HOST_TABLE_OF_DEVICES,
 };
 
 static const char* tcpa_pc_event_id_strings[] = {
-	""
+	"",
 	"SMBIOS",
 	"BIS Certificate",
 	"POST BIOS ",
@@ -116,10 +137,12 @@ static const char* tcpa_pc_event_id_strings[] = {
 	"NVRAM",
 	"Option ROM",
 	"Option ROM config",
-	"Option ROM microcode",
+	"",
+	"Option ROM microcode ",
 	"S-CRTM Version",
-	"S-CRTM Contents",
-	"S-CRTM POST Contents",
+	"S-CRTM Contents ",
+	"POST Contents ",
+	"Table of Devices",
 };
 
 /* returns pointer to start of pos. entry of tcg log */
@@ -191,7 +214,7 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 	const char *name = "";
 	char data[40] = "";
 	int i, n_len = 0, d_len = 0;
-	u32 event_id;
+	struct tcpa_pc_event *pc_event;
 
 	switch(event->event_type) {
 	case PREBOOT:
@@ -220,31 +243,32 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 		}
 		break;
 	case EVENT_TAG:
-		event_id = be32_to_cpu(*((u32 *)event_entry));
+		pc_event = (struct tcpa_pc_event *)event_entry;
 
 		/* ToDo Row data -> Base64 */
 
-		switch (event_id) {
+		switch (pc_event->event_id) {
 		case SMBIOS:
 		case BIS_CERT:
 		case CMOS:
 		case NVRAM:
 		case OPTION_ROM_EXEC:
 		case OPTION_ROM_CONFIG:
-		case OPTION_ROM_MICROCODE:
 		case S_CRTM_VERSION:
-		case S_CRTM_CONTENTS:
-		case POST_CONTENTS:
-			name = tcpa_pc_event_id_strings[event_id];
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			break;
+		/* hash data */
 		case POST_BIOS_ROM:
 		case ESCD:
-			name = tcpa_pc_event_id_strings[event_id];
+		case OPTION_ROM_MICROCODE:
+		case S_CRTM_CONTENTS:
+		case POST_CONTENTS:
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			for (i = 0; i < 20; i++)
-				d_len += sprintf(data, "%02x",
-						event_entry[8 + i]);
+				d_len += sprintf(&data[2*i], "%02x",
+						pc_event->event_data[i]);
 			break;
 		default:
 			break;
@@ -260,52 +284,13 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 
 static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
 {
+	struct tcpa_event *event = v;
+	char *data = v;
+	int i;
 
-	char *eventname;
-	char data[4];
-	u32 help;
-	int i, len;
-	struct tcpa_event *event = (struct tcpa_event *) v;
-	unsigned char *event_entry =
-	    (unsigned char *) (v + sizeof(struct tcpa_event));
-
-	eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
-	if (!eventname) {
-		printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
-		       __func__);
-		return -ENOMEM;
-	}
-
-	/* 1st: PCR used is in little-endian format (4 bytes) */
-	help = le32_to_cpu(event->pcr_index);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
-		seq_putc(m, data[i]);
-
-	/* 2nd: SHA1 (20 bytes) */
-	for (i = 0; i < 20; i++)
-		seq_putc(m, event->pcr_value[i]);
-
-	/* 3rd: event type identifier (4 bytes) */
-	help = le32_to_cpu(event->event_type);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++)
 		seq_putc(m, data[i]);
 
-	len = 0;
-
-	len += get_event_name(eventname, event, event_entry);
-
-	/* 4th:  filename <= 255 + \'0' delimiter */
-	if (len > TCG_EVENT_NAME_LEN_MAX)
-		len = TCG_EVENT_NAME_LEN_MAX;
-
-	for (i = 0; i < len; i++)
-		seq_putc(m, eventname[i]);
-
-	/* 5th: delimiter */
-	seq_putc(m, '\0');
-
 	return 0;
 }
 
@@ -353,6 +338,7 @@ static int tpm_ascii_bios_measurements_show(struct seq_file *m, void *v)
 	/* 4th: eventname <= max + \'0' delimiter */
 	seq_printf(m, " %s\n", eventname);
 
+	kfree(eventname);
 	return 0;
 }
 
@@ -376,6 +362,7 @@ static int read_log(struct tpm_bios_log *log)
 	struct acpi_tcpa *buff;
 	acpi_status status;
 	struct acpi_table_header *virt;
+	u64 len, start;
 
 	if (log->bios_event_log != NULL) {
 		printk(KERN_ERR
@@ -396,27 +383,37 @@ static int read_log(struct tpm_bios_log *log)
 		return -EIO;
 	}
 
-	if (buff->log_max_len == 0) {
+	switch(buff->platform_class) {
+	case BIOS_SERVER:
+		len = buff->server.log_max_len;
+		start = buff->server.log_start_addr;
+		break;
+	case BIOS_CLIENT:
+	default:
+		len = buff->client.log_max_len;
+		start = buff->client.log_start_addr;
+		break;
+	}
+	if (!len) {
 		printk(KERN_ERR "%s: ERROR - TCPA log area empty\n", __func__);
 		return -EIO;
 	}
 
 	/* malloc EventLog space */
-	log->bios_event_log = kmalloc(buff->log_max_len, GFP_KERNEL);
+	log->bios_event_log = kmalloc(len, GFP_KERNEL);
 	if (!log->bios_event_log) {
-		printk
-		    ("%s: ERROR - Not enough  Memory for BIOS measurements\n",
-		     __func__);
+		printk("%s: ERROR - Not enough  Memory for BIOS measurements\n",
+			__func__);
 		return -ENOMEM;
 	}
 
-	log->bios_event_log_end = log->bios_event_log + buff->log_max_len;
+	log->bios_event_log_end = log->bios_event_log + len;
 
-	acpi_os_map_memory(buff->log_start_addr, buff->log_max_len, (void *) &virt);
+	acpi_os_map_memory(start, len, (void *) &virt);
 
-	memcpy(log->bios_event_log, virt, buff->log_max_len);
+	memcpy(log->bios_event_log, virt, len);
 
-	acpi_os_unmap_memory(virt, buff->log_max_len);
+	acpi_os_unmap_memory(virt, len);
 	return 0;
 }
 
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 24095f6ee6d..adfff21beb2 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -15,6 +15,7 @@
  * License.
  */
 
+#include <linux/init.h>
 #include <linux/pnp.h>
 #include "tpm.h"
 
@@ -104,7 +105,7 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
 
 	if (clear_wrfifo) {
 		for (i = 0; i < 4096; i++) {
-			status = inb(chip->vendor->base + WRFIFO);
+			status = inb(chip->vendor.base + WRFIFO);
 			if (status == 0xff) {
 				if (check == 5)
 					break;
@@ -124,8 +125,8 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
 	 */
 	i = 0;
 	do {
-		status = inb(chip->vendor->base + RDFIFO);
-		status = inb(chip->vendor->base + STAT);
+		status = inb(chip->vendor.base + RDFIFO);
+		status = inb(chip->vendor.base + STAT);
 		i++;
 		if (i == TPM_MAX_TRIES)
 			return -EIO;
@@ -138,7 +139,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit)
 	int status;
 	int i;
 	for (i = 0; i < TPM_MAX_TRIES; i++) {
-		status = inb(chip->vendor->base + STAT);
+		status = inb(chip->vendor.base + STAT);
 		/* check the status-register if wait_for_bit is set */
 		if (status & 1 << wait_for_bit)
 			break;
@@ -157,7 +158,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit)
 static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
 {
 	wait(chip, STAT_XFE);
-	outb(sendbyte, chip->vendor->base + WRFIFO);
+	outb(sendbyte, chip->vendor.base + WRFIFO);
 }
 
     /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
@@ -204,7 +205,7 @@ recv_begin:
 		ret = wait(chip, STAT_RDA);
 		if (ret)
 			return -EIO;
-		buf[i] = inb(chip->vendor->base + RDFIFO);
+		buf[i] = inb(chip->vendor.base + RDFIFO);
 	}
 
 	if (buf[0] != TPM_VL_VER) {
@@ -219,7 +220,7 @@ recv_begin:
 
 		for (i = 0; i < size; i++) {
 			wait(chip, STAT_RDA);
-			buf[i] = inb(chip->vendor->base + RDFIFO);
+			buf[i] = inb(chip->vendor.base + RDFIFO);
 		}
 
 		if ((size == 0x6D00) && (buf[1] == 0x80)) {
@@ -268,7 +269,7 @@ static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count)
 	u8 count_high, count_low, count_4, count_3, count_2, count_1;
 
 	/* Disabling Reset, LP and IRQC */
-	outb(RESET_LP_IRQC_DISABLE, chip->vendor->base + CMD);
+	outb(RESET_LP_IRQC_DISABLE, chip->vendor.base + CMD);
 
 	ret = empty_fifo(chip, 1);
 	if (ret) {
@@ -319,7 +320,7 @@ static void tpm_inf_cancel(struct tpm_chip *chip)
 
 static u8 tpm_inf_status(struct tpm_chip *chip)
 {
-	return inb(chip->vendor->base + STAT);
+	return inb(chip->vendor.base + STAT);
 }
 
 static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
@@ -346,7 +347,7 @@ static struct file_operations inf_ops = {
 	.release = tpm_release,
 };
 
-static struct tpm_vendor_specific tpm_inf = {
+static const struct tpm_vendor_specific tpm_inf = {
 	.recv = tpm_inf_recv,
 	.send = tpm_inf_send,
 	.cancel = tpm_inf_cancel,
@@ -375,6 +376,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 	int version[2];
 	int productid[2];
 	char chipname[20];
+	struct tpm_chip *chip;
 
 	/* read IO-ports through PnP */
 	if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
@@ -395,14 +397,13 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 			goto err_last;
 		}
 		/* publish my base address and request region */
-		tpm_inf.base = TPM_INF_BASE;
 		if (request_region
-		    (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
+		    (TPM_INF_BASE, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
 			rc = -EINVAL;
 			goto err_last;
 		}
-		if (request_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN,
-				"tpm_infineon0") == NULL) {
+		if (request_region
+		    (TPM_INF_ADDR, TPM_INF_ADDR_LEN, "tpm_infineon0") == NULL) {
 			rc = -EINVAL;
 			goto err_last;
 		}
@@ -442,9 +443,9 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 
 		/* configure TPM with IO-ports */
 		outb(IOLIMH, TPM_INF_ADDR);
-		outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA);
+		outb(((TPM_INF_BASE >> 8) & 0xff), TPM_INF_DATA);
 		outb(IOLIML, TPM_INF_ADDR);
-		outb((tpm_inf.base & 0xff), TPM_INF_DATA);
+		outb((TPM_INF_BASE & 0xff), TPM_INF_DATA);
 
 		/* control if IO-ports are set correctly */
 		outb(IOLIMH, TPM_INF_ADDR);
@@ -452,10 +453,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 		outb(IOLIML, TPM_INF_ADDR);
 		iol = inb(TPM_INF_DATA);
 
-		if ((ioh << 8 | iol) != tpm_inf.base) {
+		if ((ioh << 8 | iol) != TPM_INF_BASE) {
 			dev_err(&dev->dev,
-				"Could not set IO-ports to 0x%lx\n",
-				tpm_inf.base);
+				"Could not set IO-ports to 0x%x\n",
+				TPM_INF_BASE);
 			rc = -EIO;
 			goto err_release_region;
 		}
@@ -466,15 +467,15 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 		outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
 
 		/* disable RESET, LP and IRQC */
-		outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD);
+		outb(RESET_LP_IRQC_DISABLE, TPM_INF_BASE + CMD);
 
 		/* Finally, we're done, print some infos */
 		dev_info(&dev->dev, "TPM found: "
 			 "config base 0x%x, "
 			 "io base 0x%x, "
-			 "chip version %02x%02x, "
-			 "vendor id %x%x (Infineon), "
-			 "product id %02x%02x"
+			 "chip version 0x%02x%02x, "
+			 "vendor id 0x%x%x (Infineon), "
+			 "product id 0x%02x%02x"
 			 "%s\n",
 			 TPM_INF_ADDR,
 			 TPM_INF_BASE,
@@ -482,11 +483,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 			 vendorid[0], vendorid[1],
 			 productid[0], productid[1], chipname);
 
-		rc = tpm_register_hardware(&dev->dev, &tpm_inf);
-		if (rc < 0) {
-			rc = -ENODEV;
+		if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) {
 			goto err_release_region;
 		}
+		chip->vendor.base = TPM_INF_BASE;
 		return 0;
 	} else {
 		rc = -ENODEV;
@@ -494,7 +494,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 	}
 
 err_release_region:
-	release_region(tpm_inf.base, TPM_INF_PORT_LEN);
+	release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
 	release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
 
 err_last:
@@ -506,7 +506,8 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
 	struct tpm_chip *chip = pnp_get_drvdata(dev);
 
 	if (chip) {
-		release_region(chip->vendor->base, TPM_INF_PORT_LEN);
+		release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
+		release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
 		tpm_remove_hardware(chip->dev);
 	}
 }
@@ -520,7 +521,7 @@ static struct pnp_driver tpm_inf_pnp = {
 	},
 	.id_table = tpm_pnp_tbl,
 	.probe = tpm_inf_pnp_probe,
-	.remove = tpm_inf_pnp_remove,
+	.remove = __devexit_p(tpm_inf_pnp_remove),
 };
 
 static int __init init_inf(void)
@@ -538,5 +539,5 @@ module_exit(cleanup_inf);
 
 MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>");
 MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
-MODULE_VERSION("1.7");
+MODULE_VERSION("1.8");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 680a8e33188..4c8bc06c7d9 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -71,7 +71,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
 	unsigned long stop;
 
 	/* status immediately available check */
-	*data = inb(chip->vendor->base + NSC_STATUS);
+	*data = inb(chip->vendor.base + NSC_STATUS);
 	if ((*data & mask) == val)
 		return 0;
 
@@ -79,7 +79,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
 	stop = jiffies + 10 * HZ;
 	do {
 		msleep(TPM_TIMEOUT);
-		*data = inb(chip->vendor->base + 1);
+		*data = inb(chip->vendor.base + 1);
 		if ((*data & mask) == val)
 			return 0;
 	}
@@ -94,9 +94,9 @@ static int nsc_wait_for_ready(struct tpm_chip *chip)
 	unsigned long stop;
 
 	/* status immediately available check */
-	status = inb(chip->vendor->base + NSC_STATUS);
+	status = inb(chip->vendor.base + NSC_STATUS);
 	if (status & NSC_STATUS_OBF)
-		status = inb(chip->vendor->base + NSC_DATA);
+		status = inb(chip->vendor.base + NSC_DATA);
 	if (status & NSC_STATUS_RDY)
 		return 0;
 
@@ -104,9 +104,9 @@ static int nsc_wait_for_ready(struct tpm_chip *chip)
 	stop = jiffies + 100;
 	do {
 		msleep(TPM_TIMEOUT);
-		status = inb(chip->vendor->base + NSC_STATUS);
+		status = inb(chip->vendor.base + NSC_STATUS);
 		if (status & NSC_STATUS_OBF)
-			status = inb(chip->vendor->base + NSC_DATA);
+			status = inb(chip->vendor.base + NSC_DATA);
 		if (status & NSC_STATUS_RDY)
 			return 0;
 	}
@@ -132,7 +132,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
 		return -EIO;
 	}
 	if ((data =
-	     inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
+	     inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
 		dev_err(chip->dev, "not in normal mode (0x%x)\n",
 			data);
 		return -EIO;
@@ -148,7 +148,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
 		}
 		if (data & NSC_STATUS_F0)
 			break;
-		*p = inb(chip->vendor->base + NSC_DATA);
+		*p = inb(chip->vendor.base + NSC_DATA);
 	}
 
 	if ((data & NSC_STATUS_F0) == 0 &&
@@ -156,7 +156,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
 		dev_err(chip->dev, "F0 not set\n");
 		return -EIO;
 	}
-	if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) {
+	if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) {
 		dev_err(chip->dev,
 			"expected end of command(0x%x)\n", data);
 		return -EIO;
@@ -182,7 +182,7 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
 	 * fix it. Not sure why this is needed, we followed the flow
 	 * chart in the manual to the letter.
 	 */
-	outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
 
 	if (nsc_wait_for_ready(chip) != 0)
 		return -EIO;
@@ -192,7 +192,7 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
 		return -EIO;
 	}
 
-	outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND);
 	if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
 		dev_err(chip->dev, "IBR timeout\n");
 		return -EIO;
@@ -204,26 +204,26 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
 				"IBF timeout (while writing data)\n");
 			return -EIO;
 		}
-		outb(buf[i], chip->vendor->base + NSC_DATA);
+		outb(buf[i], chip->vendor.base + NSC_DATA);
 	}
 
 	if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
 		dev_err(chip->dev, "IBF timeout\n");
 		return -EIO;
 	}
-	outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND);
 
 	return count;
 }
 
 static void tpm_nsc_cancel(struct tpm_chip *chip)
 {
-	outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
 }
 
 static u8 tpm_nsc_status(struct tpm_chip *chip)
 {
-	return inb(chip->vendor->base + NSC_STATUS);
+	return inb(chip->vendor.base + NSC_STATUS);
 }
 
 static struct file_operations nsc_ops = {
@@ -250,7 +250,7 @@ static struct attribute * nsc_attrs[] = {
 
 static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs };
 
-static struct tpm_vendor_specific tpm_nsc = {
+static const struct tpm_vendor_specific tpm_nsc = {
 	.recv = tpm_nsc_recv,
 	.send = tpm_nsc_send,
 	.cancel = tpm_nsc_cancel,
@@ -268,7 +268,7 @@ static void __devexit tpm_nsc_remove(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if ( chip ) {
-		release_region(chip->vendor->base, 2);
+		release_region(chip->vendor.base, 2);
 		tpm_remove_hardware(chip->dev);
 	}
 }
@@ -286,7 +286,8 @@ static int __init init_nsc(void)
 	int rc = 0;
 	int lo, hi;
 	int nscAddrBase = TPM_ADDR;
-
+	struct tpm_chip *chip;
+	unsigned long base;
 
 	/* verify that it is a National part (SID) */
 	if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
@@ -300,7 +301,7 @@ static int __init init_nsc(void)
 
 	hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
 	lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
-	tpm_nsc.base = (hi<<8) | lo;
+	base = (hi<<8) | lo;
 
 	/* enable the DPM module */
 	tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
@@ -320,13 +321,15 @@ static int __init init_nsc(void)
 	if ((rc = platform_device_register(pdev)) < 0)
 		goto err_free_dev;
 
-	if (request_region(tpm_nsc.base, 2, "tpm_nsc0") == NULL ) {
+	if (request_region(base, 2, "tpm_nsc0") == NULL ) {
 		rc = -EBUSY;
 		goto err_unreg_dev;
 	}
 
-	if ((rc = tpm_register_hardware(&pdev->dev, &tpm_nsc)) < 0)
+	if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) {
+		rc = -ENODEV;
 		goto err_rel_reg;
+	}
 
 	dev_dbg(&pdev->dev, "NSC TPM detected\n");
 	dev_dbg(&pdev->dev,
@@ -361,10 +364,12 @@ static int __init init_nsc(void)
 		 "NSC TPM revision %d\n",
 		 tpm_read_index(nscAddrBase, 0x27) & 0x1F);
 
+	chip->vendor.base = base;
+
 	return 0;
 
 err_rel_reg:
-	release_region(tpm_nsc.base, 2);
+	release_region(base, 2);
 err_unreg_dev:
 	platform_device_unregister(pdev);
 err_free_dev:
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
new file mode 100644
index 00000000000..8ea70625f7e
--- /dev/null
+++ b/drivers/char/tpm/tpm_tis.c
@@ -0,0 +1,665 @@
+/*
+ * Copyright (C) 2005, 2006 IBM Corporation
+ *
+ * Authors:
+ * Leendert van Doorn <leendert@watson.ibm.com>
+ * Kylene Hall <kjhall@us.ibm.com>
+ *
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This device driver implements the TPM interface as defined in
+ * the TCG TPM Interface Spec version 1.2, revision 1.0.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pnp.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include "tpm.h"
+
+#define TPM_HEADER_SIZE 10
+
+enum tis_access {
+	TPM_ACCESS_VALID = 0x80,
+	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+	TPM_ACCESS_REQUEST_PENDING = 0x04,
+	TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum tis_status {
+	TPM_STS_VALID = 0x80,
+	TPM_STS_COMMAND_READY = 0x40,
+	TPM_STS_GO = 0x20,
+	TPM_STS_DATA_AVAIL = 0x10,
+	TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum tis_int_flags {
+	TPM_GLOBAL_INT_ENABLE = 0x80000000,
+	TPM_INTF_BURST_COUNT_STATIC = 0x100,
+	TPM_INTF_CMD_READY_INT = 0x080,
+	TPM_INTF_INT_EDGE_FALLING = 0x040,
+	TPM_INTF_INT_EDGE_RISING = 0x020,
+	TPM_INTF_INT_LEVEL_LOW = 0x010,
+	TPM_INTF_INT_LEVEL_HIGH = 0x008,
+	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
+	TPM_INTF_STS_VALID_INT = 0x002,
+	TPM_INTF_DATA_AVAIL_INT = 0x001,
+};
+
+enum tis_defaults {
+	TIS_MEM_BASE = 0xFED40000,
+	TIS_MEM_LEN = 0x5000,
+	TIS_SHORT_TIMEOUT = 750,	/* ms */
+	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
+};
+
+#define	TPM_ACCESS(l)			(0x0000 | ((l) << 12))
+#define	TPM_INT_ENABLE(l)		(0x0008 | ((l) << 12))
+#define	TPM_INT_VECTOR(l)		(0x000C | ((l) << 12))
+#define	TPM_INT_STATUS(l)		(0x0010 | ((l) << 12))
+#define	TPM_INTF_CAPS(l)		(0x0014 | ((l) << 12))
+#define	TPM_STS(l)			(0x0018 | ((l) << 12))
+#define	TPM_DATA_FIFO(l)		(0x0024 | ((l) << 12))
+
+#define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
+#define	TPM_RID(l)			(0x0F04 | ((l) << 12))
+
+static LIST_HEAD(tis_chips);
+static DEFINE_SPINLOCK(tis_lock);
+
+static int check_locality(struct tpm_chip *chip, int l)
+{
+	if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
+	     (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+	    (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
+		return chip->vendor.locality = l;
+
+	return -1;
+}
+
+static void release_locality(struct tpm_chip *chip, int l, int force)
+{
+	if (force || (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
+		      (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
+	    (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID))
+		iowrite8(TPM_ACCESS_ACTIVE_LOCALITY,
+			 chip->vendor.iobase + TPM_ACCESS(l));
+}
+
+static int request_locality(struct tpm_chip *chip, int l)
+{
+	unsigned long stop;
+	long rc;
+
+	if (check_locality(chip, l) >= 0)
+		return l;
+
+	iowrite8(TPM_ACCESS_REQUEST_USE,
+		 chip->vendor.iobase + TPM_ACCESS(l));
+
+	if (chip->vendor.irq) {
+		rc = wait_event_interruptible_timeout(chip->vendor.int_queue,
+						      (check_locality
+						       (chip, l) >= 0),
+						      chip->vendor.timeout_a);
+		if (rc > 0)
+			return l;
+
+	} else {
+		/* wait for burstcount */
+		stop = jiffies + chip->vendor.timeout_a;
+		do {
+			if (check_locality(chip, l) >= 0)
+				return l;
+			msleep(TPM_TIMEOUT);
+		}
+		while (time_before(jiffies, stop));
+	}
+	return -1;
+}
+
+static u8 tpm_tis_status(struct tpm_chip *chip)
+{
+	return ioread8(chip->vendor.iobase +
+		       TPM_STS(chip->vendor.locality));
+}
+
+static void tpm_tis_ready(struct tpm_chip *chip)
+{
+	/* this causes the current command to be aborted */
+	iowrite8(TPM_STS_COMMAND_READY,
+		 chip->vendor.iobase + TPM_STS(chip->vendor.locality));
+}
+
+static int get_burstcount(struct tpm_chip *chip)
+{
+	unsigned long stop;
+	int burstcnt;
+
+	/* wait for burstcount */
+	/* which timeout value, spec has 2 answers (c & d) */
+	stop = jiffies + chip->vendor.timeout_d;
+	do {
+		burstcnt = ioread8(chip->vendor.iobase +
+				   TPM_STS(chip->vendor.locality) + 1);
+		burstcnt += ioread8(chip->vendor.iobase +
+				    TPM_STS(chip->vendor.locality) +
+				    2) << 8;
+		if (burstcnt)
+			return burstcnt;
+		msleep(TPM_TIMEOUT);
+	} while (time_before(jiffies, stop));
+	return -EBUSY;
+}
+
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+			 wait_queue_head_t *queue)
+{
+	unsigned long stop;
+	long rc;
+	u8 status;
+
+	/* check current status */
+	status = tpm_tis_status(chip);
+	if ((status & mask) == mask)
+		return 0;
+
+	if (chip->vendor.irq) {
+		rc = wait_event_interruptible_timeout(*queue,
+						      ((tpm_tis_status
+							(chip) & mask) ==
+						       mask), timeout);
+		if (rc > 0)
+			return 0;
+	} else {
+		stop = jiffies + timeout;
+		do {
+			msleep(TPM_TIMEOUT);
+			status = tpm_tis_status(chip);
+			if ((status & mask) == mask)
+				return 0;
+		} while (time_before(jiffies, stop));
+	}
+	return -ETIME;
+}
+
+static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	int size = 0, burstcnt;
+	while (size < count &&
+	       wait_for_stat(chip,
+			     TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+			     chip->vendor.timeout_c,
+			     &chip->vendor.read_queue)
+	       == 0) {
+		burstcnt = get_burstcount(chip);
+		for (; burstcnt > 0 && size < count; burstcnt--)
+			buf[size++] = ioread8(chip->vendor.iobase +
+					      TPM_DATA_FIFO(chip->vendor.
+							    locality));
+	}
+	return size;
+}
+
+static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	int size = 0;
+	int expected, status;
+
+	if (count < TPM_HEADER_SIZE) {
+		size = -EIO;
+		goto out;
+	}
+
+	/* read first 10 bytes, including tag, paramsize, and result */
+	if ((size =
+	     recv_data(chip, buf, TPM_HEADER_SIZE)) < TPM_HEADER_SIZE) {
+		dev_err(chip->dev, "Unable to read header\n");
+		goto out;
+	}
+
+	expected = be32_to_cpu(*(__be32 *) (buf + 2));
+	if (expected > count) {
+		size = -EIO;
+		goto out;
+	}
+
+	if ((size +=
+	     recv_data(chip, &buf[TPM_HEADER_SIZE],
+		       expected - TPM_HEADER_SIZE)) < expected) {
+		dev_err(chip->dev, "Unable to read remainder of result\n");
+		size = -ETIME;
+		goto out;
+	}
+
+	wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
+		      &chip->vendor.int_queue);
+	status = tpm_tis_status(chip);
+	if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
+		dev_err(chip->dev, "Error left over data\n");
+		size = -EIO;
+		goto out;
+	}
+
+out:
+	tpm_tis_ready(chip);
+	release_locality(chip, chip->vendor.locality, 0);
+	return size;
+}
+
+/*
+ * If interrupts are used (signaled by an irq set in the vendor structure)
+ * tpm.c can skip polling for the data to be available as the interrupt is
+ * waited for here
+ */
+static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+	int rc, status, burstcnt;
+	size_t count = 0;
+	u32 ordinal;
+
+	if (request_locality(chip, 0) < 0)
+		return -EBUSY;
+
+	status = tpm_tis_status(chip);
+	if ((status & TPM_STS_COMMAND_READY) == 0) {
+		tpm_tis_ready(chip);
+		if (wait_for_stat
+		    (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
+		     &chip->vendor.int_queue) < 0) {
+			rc = -ETIME;
+			goto out_err;
+		}
+	}
+
+	while (count < len - 1) {
+		burstcnt = get_burstcount(chip);
+		for (; burstcnt > 0 && count < len - 1; burstcnt--) {
+			iowrite8(buf[count], chip->vendor.iobase +
+				 TPM_DATA_FIFO(chip->vendor.locality));
+			count++;
+		}
+
+		wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
+			      &chip->vendor.int_queue);
+		status = tpm_tis_status(chip);
+		if ((status & TPM_STS_DATA_EXPECT) == 0) {
+			rc = -EIO;
+			goto out_err;
+		}
+	}
+
+	/* write last byte */
+	iowrite8(buf[count],
+		 chip->vendor.iobase +
+		 TPM_DATA_FIFO(chip->vendor.locality));
+	wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
+		      &chip->vendor.int_queue);
+	status = tpm_tis_status(chip);
+	if ((status & TPM_STS_DATA_EXPECT) != 0) {
+		rc = -EIO;
+		goto out_err;
+	}
+
+	/* go and do it */
+	iowrite8(TPM_STS_GO,
+		 chip->vendor.iobase + TPM_STS(chip->vendor.locality));
+
+	if (chip->vendor.irq) {
+		ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+		if (wait_for_stat
+		    (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+		     tpm_calc_ordinal_duration(chip, ordinal),
+		     &chip->vendor.read_queue) < 0) {
+			rc = -ETIME;
+			goto out_err;
+		}
+	}
+	return len;
+out_err:
+	tpm_tis_ready(chip);
+	release_locality(chip, chip->vendor.locality, 0);
+	return rc;
+}
+
+static struct file_operations tis_ops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.open = tpm_open,
+	.read = tpm_read,
+	.write = tpm_write,
+	.release = tpm_release,
+};
+
+static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
+static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
+static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
+static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
+static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
+static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
+		   NULL);
+static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
+static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
+
+static struct attribute *tis_attrs[] = {
+	&dev_attr_pubek.attr,
+	&dev_attr_pcrs.attr,
+	&dev_attr_enabled.attr,
+	&dev_attr_active.attr,
+	&dev_attr_owned.attr,
+	&dev_attr_temp_deactivated.attr,
+	&dev_attr_caps.attr,
+	&dev_attr_cancel.attr, NULL,
+};
+
+static struct attribute_group tis_attr_grp = {
+	.attrs = tis_attrs
+};
+
+static struct tpm_vendor_specific tpm_tis = {
+	.status = tpm_tis_status,
+	.recv = tpm_tis_recv,
+	.send = tpm_tis_send,
+	.cancel = tpm_tis_ready,
+	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+	.req_canceled = TPM_STS_COMMAND_READY,
+	.attr_group = &tis_attr_grp,
+	.miscdev = {
+		    .fops = &tis_ops,},
+};
+
+static irqreturn_t tis_int_probe(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct tpm_chip *chip = (struct tpm_chip *) dev_id;
+	u32 interrupt;
+
+	interrupt = ioread32(chip->vendor.iobase +
+			     TPM_INT_STATUS(chip->vendor.locality));
+
+	if (interrupt == 0)
+		return IRQ_NONE;
+
+	chip->vendor.irq = irq;
+
+	/* Clear interrupts handled with TPM_EOI */
+	iowrite32(interrupt,
+		  chip->vendor.iobase +
+		  TPM_INT_STATUS(chip->vendor.locality));
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct tpm_chip *chip = (struct tpm_chip *) dev_id;
+	u32 interrupt;
+	int i;
+
+	interrupt = ioread32(chip->vendor.iobase +
+			     TPM_INT_STATUS(chip->vendor.locality));
+
+	if (interrupt == 0)
+		return IRQ_NONE;
+
+	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
+		wake_up_interruptible(&chip->vendor.read_queue);
+	if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
+		for (i = 0; i < 5; i++)
+			if (check_locality(chip, i) >= 0)
+				break;
+	if (interrupt &
+	    (TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
+	     TPM_INTF_CMD_READY_INT))
+		wake_up_interruptible(&chip->vendor.int_queue);
+
+	/* Clear interrupts handled with TPM_EOI */
+	iowrite32(interrupt,
+		  chip->vendor.iobase +
+		  TPM_INT_STATUS(chip->vendor.locality));
+	return IRQ_HANDLED;
+}
+
+static int interrupts = 1;
+module_param(interrupts, bool, 0444);
+MODULE_PARM_DESC(interrupts, "Enable interrupts");
+
+static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
+				      const struct pnp_device_id *pnp_id)
+{
+	u32 vendor, intfcaps, intmask;
+	int rc, i;
+	unsigned long start, len;
+	struct tpm_chip *chip;
+
+	start = pnp_mem_start(pnp_dev, 0);
+	len = pnp_mem_len(pnp_dev, 0);
+
+	if (!start)
+		start = TIS_MEM_BASE;
+	if (!len)
+		len = TIS_MEM_LEN;
+
+	if (!(chip = tpm_register_hardware(&pnp_dev->dev, &tpm_tis)))
+		return -ENODEV;
+
+	chip->vendor.iobase = ioremap(start, len);
+	if (!chip->vendor.iobase) {
+		rc = -EIO;
+		goto out_err;
+	}
+
+	vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
+
+	/* Default timeouts */
+	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+
+	dev_info(&pnp_dev->dev,
+		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
+		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
+
+	/* Figure out the capabilities */
+	intfcaps =
+	    ioread32(chip->vendor.iobase +
+		     TPM_INTF_CAPS(chip->vendor.locality));
+	dev_dbg(&pnp_dev->dev, "TPM interface capabilities (0x%x):\n",
+		intfcaps);
+	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
+		dev_dbg(&pnp_dev->dev, "\tBurst Count Static\n");
+	if (intfcaps & TPM_INTF_CMD_READY_INT)
+		dev_dbg(&pnp_dev->dev, "\tCommand Ready Int Support\n");
+	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Falling\n");
+	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Rising\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Level Low\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Level High\n");
+	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
+		dev_dbg(&pnp_dev->dev, "\tLocality Change Int Support\n");
+	if (intfcaps & TPM_INTF_STS_VALID_INT)
+		dev_dbg(&pnp_dev->dev, "\tSts Valid Int Support\n");
+	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
+		dev_dbg(&pnp_dev->dev, "\tData Avail Int Support\n");
+
+	if (request_locality(chip, 0) != 0) {
+		rc = -ENODEV;
+		goto out_err;
+	}
+
+	/* INTERRUPT Setup */
+	init_waitqueue_head(&chip->vendor.read_queue);
+	init_waitqueue_head(&chip->vendor.int_queue);
+
+	intmask =
+	    ioread32(chip->vendor.iobase +
+		     TPM_INT_ENABLE(chip->vendor.locality));
+
+	intmask |= TPM_INTF_CMD_READY_INT
+	    | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
+	    | TPM_INTF_STS_VALID_INT;
+
+	iowrite32(intmask,
+		  chip->vendor.iobase +
+		  TPM_INT_ENABLE(chip->vendor.locality));
+	if (interrupts) {
+		chip->vendor.irq =
+		    ioread8(chip->vendor.iobase +
+			    TPM_INT_VECTOR(chip->vendor.locality));
+
+		for (i = 3; i < 16 && chip->vendor.irq == 0; i++) {
+			iowrite8(i, chip->vendor.iobase +
+				    TPM_INT_VECTOR(chip->vendor.locality));
+			if (request_irq
+			    (i, tis_int_probe, SA_SHIRQ,
+			     chip->vendor.miscdev.name, chip) != 0) {
+				dev_info(chip->dev,
+					 "Unable to request irq: %d for probe\n",
+					 i);
+				continue;
+			}
+
+			/* Clear all existing */
+			iowrite32(ioread32
+				  (chip->vendor.iobase +
+				   TPM_INT_STATUS(chip->vendor.locality)),
+				  chip->vendor.iobase +
+				  TPM_INT_STATUS(chip->vendor.locality));
+
+			/* Turn on */
+			iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
+				  chip->vendor.iobase +
+				  TPM_INT_ENABLE(chip->vendor.locality));
+
+			/* Generate Interrupts */
+			tpm_gen_interrupt(chip);
+
+			/* Turn off */
+			iowrite32(intmask,
+				  chip->vendor.iobase +
+				  TPM_INT_ENABLE(chip->vendor.locality));
+			free_irq(i, chip);
+		}
+	}
+	if (chip->vendor.irq) {
+		iowrite8(chip->vendor.irq,
+			 chip->vendor.iobase +
+			 TPM_INT_VECTOR(chip->vendor.locality));
+		if (request_irq
+		    (chip->vendor.irq, tis_int_handler, SA_SHIRQ,
+		     chip->vendor.miscdev.name, chip) != 0) {
+			dev_info(chip->dev,
+				 "Unable to request irq: %d for use\n",
+				 chip->vendor.irq);
+			chip->vendor.irq = 0;
+		} else {
+			/* Clear all existing */
+			iowrite32(ioread32
+				  (chip->vendor.iobase +
+				   TPM_INT_STATUS(chip->vendor.locality)),
+				  chip->vendor.iobase +
+				  TPM_INT_STATUS(chip->vendor.locality));
+
+			/* Turn on */
+			iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
+				  chip->vendor.iobase +
+				  TPM_INT_ENABLE(chip->vendor.locality));
+		}
+	}
+
+	INIT_LIST_HEAD(&chip->vendor.list);
+	spin_lock(&tis_lock);
+	list_add(&chip->vendor.list, &tis_chips);
+	spin_unlock(&tis_lock);
+
+	tpm_get_timeouts(chip);
+	tpm_continue_selftest(chip);
+
+	return 0;
+out_err:
+	if (chip->vendor.iobase)
+		iounmap(chip->vendor.iobase);
+	tpm_remove_hardware(chip->dev);
+	return rc;
+}
+
+static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
+{
+	return tpm_pm_suspend(&dev->dev, msg);
+}
+
+static int tpm_tis_pnp_resume(struct pnp_dev *dev)
+{
+	return tpm_pm_resume(&dev->dev);
+}
+
+static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
+	{"PNP0C31", 0},		/* TPM */
+	{"ATM1200", 0},		/* Atmel */
+	{"IFX0102", 0},		/* Infineon */
+	{"BCM0101", 0},		/* Broadcom */
+	{"NSC1200", 0},		/* National */
+	/* Add new here */
+	{"", 0},		/* User Specified */
+	{"", 0}			/* Terminator */
+};
+
+static struct pnp_driver tis_pnp_driver = {
+	.name = "tpm_tis",
+	.id_table = tpm_pnp_tbl,
+	.probe = tpm_tis_pnp_init,
+	.suspend = tpm_tis_pnp_suspend,
+	.resume = tpm_tis_pnp_resume,
+};
+
+#define TIS_HID_USR_IDX sizeof(tpm_pnp_tbl)/sizeof(struct pnp_device_id) -2
+module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id,
+		    sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
+MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
+
+static int __init init_tis(void)
+{
+	return pnp_register_driver(&tis_pnp_driver);
+}
+
+static void __exit cleanup_tis(void)
+{
+	struct tpm_vendor_specific *i, *j;
+	struct tpm_chip *chip;
+	spin_lock(&tis_lock);
+	list_for_each_entry_safe(i, j, &tis_chips, list) {
+		chip = to_tpm_chip(i);
+		iowrite32(~TPM_GLOBAL_INT_ENABLE &
+			  ioread32(chip->vendor.iobase +
+				   TPM_INT_ENABLE(chip->vendor.
+						  locality)),
+			  chip->vendor.iobase +
+			  TPM_INT_ENABLE(chip->vendor.locality));
+		release_locality(chip, chip->vendor.locality, 1);
+		if (chip->vendor.irq)
+			free_irq(chip->vendor.irq, chip);
+		iounmap(i->iobase);
+		list_del(&i->list);
+		tpm_remove_hardware(chip->dev);
+	}
+	spin_unlock(&tis_lock);
+	pnp_unregister_driver(&tis_pnp_driver);
+}
+
+module_init(init_tis);
+module_exit(cleanup_tis);
+MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
+MODULE_DESCRIPTION("TPM Driver");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f70a47eadb5..a88b94a82b1 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -398,7 +398,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 	while (unlikely(size > copied));
 	return copied;
 }
-EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
 
 void tty_schedule_flip(struct tty_struct *tty)
 {
@@ -2723,7 +2723,11 @@ static void __do_SAK(void *arg)
 		}
 		task_lock(p);
 		if (p->files) {
-			rcu_read_lock();
+			/*
+			 * We don't take a ref to the file, so we must
+			 * hold ->file_lock instead.
+			 */
+			spin_lock(&p->files->file_lock);
 			fdt = files_fdtable(p->files);
 			for (i=0; i < fdt->max_fds; i++) {
 				filp = fcheck_files(p->files, i);
@@ -2734,11 +2738,11 @@ static void __do_SAK(void *arg)
 					printk(KERN_NOTICE "SAK: killed process %d"
 					    " (%s): fd#%d opened to the tty\n",
 					    p->pid, p->comm, i);
-					send_sig(SIGKILL, p, 1);
+					force_sig(SIGKILL, p);
 					break;
 				}
 			}
-			rcu_read_unlock();
+			spin_unlock(&p->files->file_lock);
 		}
 		task_unlock(p);
 	} while_each_thread(g, p);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index acc5d47844e..6c94879e0b9 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -3238,14 +3238,6 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
 	}
 }
 
-int is_console_suspend_safe(void)
-{
-	/* It is unsafe to suspend devices while X has control of the
-	 * hardware. Make sure we are running on a kernel-controlled console.
-	 */
-	return vc_cons[fg_console].d->vc_mode == KD_TEXT;
-}
-
 /*
  *	Visible symbols for modules
  */
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index a13395e2c37..fa2ba9ebe42 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -33,11 +33,6 @@
  *	82801E   (C-ICH)  : document number 273599-001, 273645-002,
  *	82801EB  (ICH5)   : document number 252516-001, 252517-003,
  *	82801ER  (ICH5R)  : document number 252516-001, 252517-003,
- *	82801FB  (ICH6)   : document number 301473-002, 301474-007,
- *	82801FR  (ICH6R)  : document number 301473-002, 301474-007,
- *	82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- *	82801FW  (ICH6W)  : document number 301473-001, 301474-007,
- *	82801FRW (ICH6RW) : document number 301473-001, 301474-007
  *
  *  20000710 Nils Faerber
  *	Initial Version 0.01
@@ -66,6 +61,10 @@
  *  20050807 Wim Van Sebroeck <wim@iguana.be>
  *	0.08 Make sure that the watchdog is only "armed" when started.
  *	     (Kernel Bug 4251)
+ *  20060416 Wim Van Sebroeck <wim@iguana.be>
+ *	0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ *	     ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ *	     chipsets)
  */
 
 /*
@@ -90,7 +89,7 @@
 #include "i8xx_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 9dc54736e4e..1ea04e9b2b0 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (tmr_atboot && started == 0) {
 		printk(KERN_INFO PFX "Starting Watchdog Timer\n");
 		s3c2410wdt_start();
+	} else if (!tmr_atboot) {
+		/* if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source */
+
+		s3c2410wdt_stop();
 	}
 
 	return 0;
diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c
index 515ce757204..20b88f9b7be 100644
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
 {
 	int ret;
 
-	printk(banner);
+	printk("%s\n", banner);
 
 	spin_lock_init(&sc1200wdt_lock);
 	sema_init(&open_sem, 1);
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 60c9be99c6d..2cc71b66231 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -99,7 +99,7 @@ config CPU_FREQ_GOV_USERSPACE
 	  Enable this cpufreq governor when you either want to set the
 	  CPU frequency manually or when an userspace program shall
 	  be able to set the CPU dynamically, like on LART 
-	  <http://www.lart.tudelft.nl/>
+	  <http://www.lartmaker.nl/>.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 9b6ae7dc8b8..29b2fa5534a 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -319,7 +319,6 @@ out:
 	}
 	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(cpufreq_parse_governor);
 
 
 /* drivers/base/cpu.c */
@@ -346,6 +345,8 @@ show_one(scaling_min_freq, min);
 show_one(scaling_max_freq, max);
 show_one(scaling_cur_freq, cur);
 
+static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy);
+
 /**
  * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
  */
@@ -364,7 +365,10 @@ static ssize_t store_##file_name					\
 	if (ret != 1)							\
 		return -EINVAL;						\
 									\
-	ret = cpufreq_set_policy(&new_policy);				\
+	mutex_lock(&policy->lock);					\
+	ret = __cpufreq_set_policy(policy, &new_policy);		\
+	policy->user_policy.object = policy->object;			\
+	mutex_unlock(&policy->lock);					\
 									\
 	return ret ? ret : count;					\
 }
@@ -420,7 +424,15 @@ static ssize_t store_scaling_governor (struct cpufreq_policy * policy,
 	if (cpufreq_parse_governor(str_governor, &new_policy.policy, &new_policy.governor))
 		return -EINVAL;
 
-	ret = cpufreq_set_policy(&new_policy);
+	/* Do not use cpufreq_set_policy here or the user_policy.max
+	   will be wrongly overridden */
+	mutex_lock(&policy->lock);
+	ret = __cpufreq_set_policy(policy, &new_policy);
+
+	policy->user_policy.policy = policy->policy;
+	policy->user_policy.governor = policy->governor;
+	mutex_unlock(&policy->lock);
+
 	return ret ? ret : count;
 }
 
@@ -685,7 +697,7 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 		if (!cpu_online(j))
 			continue;
 
-		dprintk("CPU already managed, adding link\n");
+		dprintk("CPU %u already managed, adding link\n", j);
 		cpufreq_cpu_get(cpu);
 		cpu_sys_dev = get_cpu_sysdev(j);
 		sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
@@ -695,9 +707,8 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	policy->governor = NULL; /* to assure that the starting sequence is
 				  * run in cpufreq_set_policy */
 	mutex_unlock(&policy->lock);
-	
+
 	/* set default policy */
-	
 	ret = cpufreq_set_policy(&new_policy);
 	if (ret) {
 		dprintk("setting policy failed\n");
@@ -707,7 +718,7 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	module_put(cpufreq_driver->owner);
 	dprintk("initialization complete\n");
 	cpufreq_debug_enable_ratelimit();
-	
+
 	return 0;
 
 
@@ -1486,7 +1497,7 @@ int cpufreq_update_policy(unsigned int cpu)
 }
 EXPORT_SYMBOL(cpufreq_update_policy);
 
-static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb,
+static int cpufreq_cpu_callback(struct notifier_block *nfb,
 					unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 037f6bf4543..e07a35487bd 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -176,8 +176,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused,
 	ret = sscanf (buf, "%u", &input);
 
 	mutex_lock(&dbs_mutex);
-	if (ret != 1 || input > 100 || input < 0 ||
-			input <= dbs_tuners_ins.down_threshold) {
+	if (ret != 1 || input > 100 || input <= dbs_tuners_ins.down_threshold) {
 		mutex_unlock(&dbs_mutex);
 		return -EINVAL;
 	}
@@ -196,8 +195,7 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused,
 	ret = sscanf (buf, "%u", &input);
 
 	mutex_lock(&dbs_mutex);
-	if (ret != 1 || input > 100 || input < 0 ||
-			input >= dbs_tuners_ins.up_threshold) {
+	if (ret != 1 || input > 100 || input >= dbs_tuners_ins.up_threshold) {
 		mutex_unlock(&dbs_mutex);
 		return -EINVAL;
 	}
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 956d121cb16..3e6ffcaa5af 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -74,6 +74,8 @@ static unsigned int dbs_enable;	/* number of CPUs using this policy */
 static DEFINE_MUTEX (dbs_mutex);
 static DECLARE_WORK	(dbs_work, do_dbs_timer, NULL);
 
+static struct workqueue_struct *dbs_workq;
+
 struct dbs_tuners {
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
@@ -364,23 +366,29 @@ static void do_dbs_timer(void *data)
 	mutex_lock(&dbs_mutex);
 	for_each_online_cpu(i)
 		dbs_check_cpu(i);
-	schedule_delayed_work(&dbs_work,
-			usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+	queue_delayed_work(dbs_workq, &dbs_work,
+			   usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
 	mutex_unlock(&dbs_mutex);
 }
 
 static inline void dbs_timer_init(void)
 {
 	INIT_WORK(&dbs_work, do_dbs_timer, NULL);
-	schedule_delayed_work(&dbs_work,
-			usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+	if (!dbs_workq)
+		dbs_workq = create_singlethread_workqueue("ondemand");
+	if (!dbs_workq) {
+		printk(KERN_ERR "ondemand: Cannot initialize kernel thread\n");
+		return;
+	}
+	queue_delayed_work(dbs_workq, &dbs_work,
+			   usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
 	return;
 }
 
 static inline void dbs_timer_exit(void)
 {
-	cancel_delayed_work(&dbs_work);
-	return;
+	if (dbs_workq)
+		cancel_rearming_delayed_workqueue(dbs_workq, &dbs_work);
 }
 
 static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
@@ -489,8 +497,12 @@ static int __init cpufreq_gov_dbs_init(void)
 
 static void __exit cpufreq_gov_dbs_exit(void)
 {
-	/* Make sure that the scheduled work is indeed not running */
-	flush_scheduled_work();
+	/* Make sure that the scheduled work is indeed not running.
+	   Assumes the timer has been cancelled first. */
+	if (dbs_workq) {
+		flush_workqueue(dbs_workq);
+		destroy_workqueue(dbs_workq);
+	}
 
 	cpufreq_unregister_governor(&cpufreq_gov_dbs);
 }
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 66572c5323a..fce31936e6d 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -25,6 +25,8 @@
 #include <linux/slab.h>
 #include "edac_mc.h"
 
+static int force_function_unhide;
+
 #define e752x_printk(level, fmt, arg...) \
 	edac_printk(level, "e752x", fmt, ##arg)
 
@@ -782,8 +784,16 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
 	debugf0("%s(): mci\n", __func__);
 	debugf0("Starting Probe1\n");
 
-	/* enable device 0 function 1 */
+	/* check to see if device 0 function 1 is enabled; if it isn't, we
+	 * assume the BIOS has reserved it for a reason and is expecting
+	 * exclusive access, we take care not to violate that assumption and
+	 * fail the probe. */
 	pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
+	if (!force_function_unhide && !(stat8 & (1 << 5))) {
+		printk(KERN_INFO "Contact your BIOS vendor to see if the "
+			"E752x error registers can be safely un-hidden\n");
+		goto fail;
+	}
 	stat8 |= (1 << 5);
 	pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
 
@@ -1063,3 +1073,8 @@ module_exit(e752x_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
 MODULE_DESCRIPTION("MC support for Intel e752x memory controllers");
+
+module_param(force_function_unhide, int, 0444);
+MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
+" 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 85429979d0d..98e395f4bb2 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for the linux kernel.
 #
-obj-$(CONFIG_EDD)             	+= edd.o
+obj-$(CONFIG_DMI)		+= dmi_scan.o
+obj-$(CONFIG_EDD)		+= edd.o
 obj-$(CONFIG_EFI_VARS)		+= efivars.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
 obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
new file mode 100644
index 00000000000..948bd7e1445
--- /dev/null
+++ b/drivers/firmware/dmi_scan.c
@@ -0,0 +1,358 @@
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
+#include <linux/efi.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <asm/dmi.h>
+
+static char * __init dmi_string(struct dmi_header *dm, u8 s)
+{
+	u8 *bp = ((u8 *) dm) + dm->length;
+	char *str = "";
+
+	if (s) {
+		s--;
+		while (s > 0 && *bp) {
+			bp += strlen(bp) + 1;
+			s--;
+		}
+
+		if (*bp != 0) {
+			str = dmi_alloc(strlen(bp) + 1);
+			if (str != NULL)
+				strcpy(str, bp);
+			else
+				printk(KERN_ERR "dmi_string: out of memory.\n");
+		}
+	}
+
+	return str;
+}
+
+/*
+ *	We have to be cautious here. We have seen BIOSes with DMI pointers
+ *	pointing to completely the wrong place for example
+ */
+static int __init dmi_table(u32 base, int len, int num,
+			    void (*decode)(struct dmi_header *))
+{
+	u8 *buf, *data;
+	int i = 0;
+
+	buf = dmi_ioremap(base, len);
+	if (buf == NULL)
+		return -1;
+
+	data = buf;
+
+	/*
+	 *	Stop when we see all the items the table claimed to have
+	 *	OR we run off the end of the table (also happens)
+	 */
+	while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
+		struct dmi_header *dm = (struct dmi_header *)data;
+		/*
+		 *  We want to know the total length (formated area and strings)
+		 *  before decoding to make sure we won't run off the table in
+		 *  dmi_decode or dmi_string
+		 */
+		data += dm->length;
+		while ((data - buf < len - 1) && (data[0] || data[1]))
+			data++;
+		if (data - buf < len - 1)
+			decode(dm);
+		data += 2;
+		i++;
+	}
+	dmi_iounmap(buf, len);
+	return 0;
+}
+
+static int __init dmi_checksum(u8 *buf)
+{
+	u8 sum = 0;
+	int a;
+
+	for (a = 0; a < 15; a++)
+		sum += buf[a];
+
+	return sum == 0;
+}
+
+static char *dmi_ident[DMI_STRING_MAX];
+static LIST_HEAD(dmi_devices);
+
+/*
+ *	Save a DMI string
+ */
+static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
+{
+	char *p, *d = (char*) dm;
+
+	if (dmi_ident[slot])
+		return;
+
+	p = dmi_string(dm, d[string]);
+	if (p == NULL)
+		return;
+
+	dmi_ident[slot] = p;
+}
+
+static void __init dmi_save_devices(struct dmi_header *dm)
+{
+	int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
+	struct dmi_device *dev;
+
+	for (i = 0; i < count; i++) {
+		char *d = (char *)(dm + 1) + (i * 2);
+
+		/* Skip disabled device */
+		if ((*d & 0x80) == 0)
+			continue;
+
+		dev = dmi_alloc(sizeof(*dev));
+		if (!dev) {
+			printk(KERN_ERR "dmi_save_devices: out of memory.\n");
+			break;
+		}
+
+		dev->type = *d++ & 0x7f;
+		dev->name = dmi_string(dm, *d);
+		dev->device_data = NULL;
+
+		list_add(&dev->list, &dmi_devices);
+	}
+}
+
+static void __init dmi_save_ipmi_device(struct dmi_header *dm)
+{
+	struct dmi_device *dev;
+	void * data;
+
+	data = dmi_alloc(dm->length);
+	if (data == NULL) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
+		return;
+	}
+
+	memcpy(data, dm, dm->length);
+
+	dev = dmi_alloc(sizeof(*dev));
+	if (!dev) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
+		return;
+	}
+
+	dev->type = DMI_DEV_TYPE_IPMI;
+	dev->name = "IPMI controller";
+	dev->device_data = data;
+
+	list_add(&dev->list, &dmi_devices);
+}
+
+/*
+ *	Process a DMI table entry. Right now all we care about are the BIOS
+ *	and machine entries. For 2.5 we should pull the smbus controller info
+ *	out of here.
+ */
+static void __init dmi_decode(struct dmi_header *dm)
+{
+	switch(dm->type) {
+	case 0:		/* BIOS Information */
+		dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
+		dmi_save_ident(dm, DMI_BIOS_DATE, 8);
+		break;
+	case 1:		/* System Information */
+		dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
+		dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
+		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
+		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
+		break;
+	case 2:		/* Base Board Information */
+		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
+		dmi_save_ident(dm, DMI_BOARD_NAME, 5);
+		dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+		break;
+	case 10:	/* Onboard Devices Information */
+		dmi_save_devices(dm);
+		break;
+	case 38:	/* IPMI Device Information */
+		dmi_save_ipmi_device(dm);
+	}
+}
+
+static int __init dmi_present(char __iomem *p)
+{
+	u8 buf[15];
+	memcpy_fromio(buf, p, 15);
+	if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
+		u16 num = (buf[13] << 8) | buf[12];
+		u16 len = (buf[7] << 8) | buf[6];
+		u32 base = (buf[11] << 24) | (buf[10] << 16) |
+			(buf[9] << 8) | buf[8];
+
+		/*
+		 * DMI version 0.0 means that the real version is taken from
+		 * the SMBIOS version, which we don't know at this point.
+		 */
+		if (buf[14] != 0)
+			printk(KERN_INFO "DMI %d.%d present.\n",
+			       buf[14] >> 4, buf[14] & 0xF);
+		else
+			printk(KERN_INFO "DMI present.\n");
+		if (dmi_table(base,len, num, dmi_decode) == 0)
+			return 0;
+	}
+	return 1;
+}
+
+void __init dmi_scan_machine(void)
+{
+	char __iomem *p, *q;
+	int rc;
+
+	if (efi_enabled) {
+		if (efi.smbios == EFI_INVALID_TABLE_ADDR)
+			goto out;
+
+               /* This is called as a core_initcall() because it isn't
+                * needed during early boot.  This also means we can
+                * iounmap the space when we're done with it.
+		*/
+		p = dmi_ioremap(efi.smbios, 32);
+		if (p == NULL)
+			goto out;
+
+		rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
+		dmi_iounmap(p, 32);
+		if (!rc)
+			return;
+	}
+	else {
+		/*
+		 * no iounmap() for that ioremap(); it would be a no-op, but
+		 * it's so early in setup that sucker gets confused into doing
+		 * what it shouldn't if we actually call it.
+		 */
+		p = dmi_ioremap(0xF0000, 0x10000);
+		if (p == NULL)
+			goto out;
+
+		for (q = p; q < p + 0x10000; q += 16) {
+			rc = dmi_present(q);
+			if (!rc)
+				return;
+		}
+	}
+ out:	printk(KERN_INFO "DMI not present or invalid.\n");
+}
+
+/**
+ *	dmi_check_system - check system DMI data
+ *	@list: array of dmi_system_id structures to match against
+ *
+ *	Walk the blacklist table running matching functions until someone
+ *	returns non zero or we hit the end. Callback function is called for
+ *	each successfull match. Returns the number of matches.
+ */
+int dmi_check_system(struct dmi_system_id *list)
+{
+	int i, count = 0;
+	struct dmi_system_id *d = list;
+
+	while (d->ident) {
+		for (i = 0; i < ARRAY_SIZE(d->matches); i++) {
+			int s = d->matches[i].slot;
+			if (s == DMI_NONE)
+				continue;
+			if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr))
+				continue;
+			/* No match */
+			goto fail;
+		}
+		count++;
+		if (d->callback && d->callback(d))
+			break;
+fail:		d++;
+	}
+
+	return count;
+}
+EXPORT_SYMBOL(dmi_check_system);
+
+/**
+ *	dmi_get_system_info - return DMI data value
+ *	@field: data index (see enum dmi_filed)
+ *
+ *	Returns one DMI data value, can be used to perform
+ *	complex DMI data checks.
+ */
+char *dmi_get_system_info(int field)
+{
+	return dmi_ident[field];
+}
+EXPORT_SYMBOL(dmi_get_system_info);
+
+/**
+ *	dmi_find_device - find onboard device by type/name
+ *	@type: device type or %DMI_DEV_TYPE_ANY to match all device types
+ *	@desc: device name string or %NULL to match all
+ *	@from: previous device found in search, or %NULL for new search.
+ *
+ *	Iterates through the list of known onboard devices. If a device is
+ *	found with a matching @vendor and @device, a pointer to its device
+ *	structure is returned.  Otherwise, %NULL is returned.
+ *	A new search is initiated by passing %NULL to the @from argument.
+ *	If @from is not %NULL, searches continue from next device.
+ */
+struct dmi_device * dmi_find_device(int type, const char *name,
+				    struct dmi_device *from)
+{
+	struct list_head *d, *head = from ? &from->list : &dmi_devices;
+
+	for(d = head->next; d != &dmi_devices; d = d->next) {
+		struct dmi_device *dev = list_entry(d, struct dmi_device, list);
+
+		if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) &&
+		    ((name == NULL) || (strcmp(dev->name, name) == 0)))
+			return dev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_find_device);
+
+/**
+ *	dmi_get_year - Return year of a DMI date
+ *	@field:	data index (like dmi_get_system_info)
+ *
+ *	Returns -1 when the field doesn't exist. 0 when it is broken.
+ */
+int dmi_get_year(int field)
+{
+	int year;
+	char *s = dmi_get_system_info(field);
+
+	if (!s)
+		return -1;
+	if (*s == '\0')
+		return 0;
+	s = strrchr(s, '/');
+	if (!s)
+		return 0;
+
+	s += 1;
+	year = simple_strtoul(s, NULL, 0);
+	if (year && year < 100) {	/* 2-digit year */
+		year += 1900;
+		if (year < 1996)	/* no dates < spec 1.0 */
+			year += 100;
+	}
+
+	return year;
+}
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 6865c64d8a5..958602e2841 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1161,7 +1161,7 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 	   bank. */
 	if (kind < 0) {
 		if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
-			dev_warn(dev, "Detection failed at step 3\n");
+			dev_dbg(dev, "Detection failed at step 1\n");
 			goto ERROR1;
 		}
 		val1 = w83792d_read_value(client, W83792D_REG_BANK);
@@ -1170,6 +1170,7 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 		if (!(val1 & 0x07)) {  /* is Bank0 */
 			if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
 			     ((val1 & 0x80) && (val2 != 0x5c))) {
+				dev_dbg(dev, "Detection failed at step 2\n");
 				goto ERROR1;
 			}
 		}
@@ -1177,7 +1178,7 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 		   should match */
 		if (w83792d_read_value(client,
 					W83792D_REG_I2C_ADDR) != address) {
-			dev_warn(dev, "Detection failed at step 5\n");
+			dev_dbg(dev, "Detection failed at step 3\n");
 			goto ERROR1;
 		}
 	}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 089c6f5b24d..d6d44946a28 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -286,7 +286,10 @@ config I2C_PARPORT
 	  This driver is a replacement for (and was inspired by) an older
 	  driver named i2c-philips-par.  The new driver supports more devices,
 	  and makes it easier to add support for new devices.
-	  
+
+	  An adapter type parameter is now mandatory.  Please read the file
+	  Documentation/i2c/busses/i2c-parport for details.
+
 	  Another driver exists, named i2c-parport-light, which doesn't depend
 	  on the parport driver.  This is meant for embedded systems. Don't say
 	  Y here if you intend to say Y or M there.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 8e0f3158215..dfca7493362 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -478,6 +478,11 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		ret = i801_transaction();
 	}
 
+	/* Some BIOSes don't like it when PEC is enabled at reboot or resume
+	   time, so we forcibly disable it after every transaction. */
+	if (hwpec)
+		outb_p(0, SMBAUXCTL);
+
 	if(block)
 		return ret;
 	if(ret)
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index c63025a4c86..e09ebbb2f9f 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -121,9 +121,14 @@ static struct i2c_adapter parport_adapter = {
 
 static int __init i2c_parport_init(void)
 {
-	if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
+	if (type < 0) {
+		printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
+		return -ENODEV;
+	}
+
+	if (type >= ARRAY_SIZE(adapter_parm)) {
 		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
-		type = 0;
+		return -ENODEV;
 	}
 
 	if (base == 0) {
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 7e2e8cd1c14..934bd55bae1 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -241,9 +241,14 @@ static struct parport_driver i2c_parport_driver = {
 
 static int __init i2c_parport_init(void)
 {
-	if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
+	if (type < 0) {
+		printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
+		return -ENODEV;
+	}
+
+	if (type >= ARRAY_SIZE(adapter_parm)) {
 		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
-		type = 0;
+		return -ENODEV;
 	}
 
 	return parport_register_driver(&i2c_parport_driver);
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index d702e5e0388..9ddd816d5d0 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -90,7 +90,7 @@ static struct adapter_parm adapter_parm[] = {
 	},
 };
 
-static int type;
+static int type = -1;
 module_param(type, int, 0);
 MODULE_PARM_DESC(type,
 	"Type of adapter:\n"
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 3024907cdaf..1a73c0532fc 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -43,13 +43,6 @@
 #include <linux/init.h>
 #include <asm/io.h>
 
-/*
-	HISTORY:
-	2003-05-11	1.0.0 	Updated from lm_sensors project for kernel 2.5
-				(was i2c-sis645.c from lm_sensors 2.7.0)
-*/
-#define SIS96x_VERSION "1.0.0"
-
 /* base address register in PCI config space */
 #define SIS96x_BAR 0x04
 
@@ -337,7 +330,6 @@ static struct pci_driver sis96x_driver = {
 
 static int __init i2c_sis96x_init(void)
 {
-	printk(KERN_INFO "i2c-sis96x version %s\n", SIS96x_VERSION);
 	return pci_register_driver(&sis96x_driver);
 }
 
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 8bd305e47f0..766cc969c4d 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -133,6 +133,9 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 
 		outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
 		outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
+
+		/* Reset the status register */
+		outb(0, ACBST);
 		return;
 	}
 
@@ -228,6 +231,10 @@ static void scx200_acb_poll(struct scx200_acb_iface *iface)
 	timeout = jiffies + POLL_TIMEOUT;
 	while (time_before(jiffies, timeout)) {
 		status = inb(ACBST);
+
+		/* Reset the status register to avoid the hang */
+		outb(0, ACBST);
+
 		if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) {
 			scx200_acb_machine(iface, status);
 			return;
@@ -415,7 +422,6 @@ static int  __init scx200_acb_create(const char *text, int base, int index)
 	struct scx200_acb_iface *iface;
 	struct i2c_adapter *adapter;
 	int rc;
-	char description[64];
 
 	iface = kzalloc(sizeof(*iface), GFP_KERNEL);
 	if (!iface) {
@@ -434,10 +440,7 @@ static int  __init scx200_acb_create(const char *text, int base, int index)
 
 	mutex_init(&iface->mutex);
 
-	snprintf(description, sizeof(description), "%s ACCESS.bus [%s]",
-		 text, adapter->name);
-
-	if (request_region(base, 8, description) == 0) {
+	if (!request_region(base, 8, adapter->name)) {
 		printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
 			base, base + 8-1);
 		rc = -EBUSY;
@@ -488,7 +491,7 @@ static struct pci_device_id divil_pci[] = {
 
 #define MSR_LBAR_SMB		0x5140000B
 
-static int scx200_add_cs553x(void)
+static __init int scx200_add_cs553x(void)
 {
 	u32	low, hi;
 	u32	smb_base;
@@ -524,6 +527,9 @@ static int __init scx200_acb_init(void)
 	} else if (pci_dev_present(divil_pci))
 		rc = scx200_add_cs553x();
 
+	/* If at least one bus was created, init must succeed */
+	if (scx200_acb_list)
+		return 0;
 	return rc;
 }
 
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index 03d09ed5ec2..4630f1969a0 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -27,6 +27,7 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 
 #define DS1374_REG_TOD0		0x00
 #define DS1374_REG_TOD1		0x01
@@ -139,7 +140,7 @@ ulong ds1374_get_rtc_time(void)
 	return t1;
 }
 
-static void ds1374_set_tlet(ulong arg)
+static void ds1374_set_work(void *arg)
 {
 	ulong t1, t2;
 	int limit = 10;		/* arbitrary retry limit */
@@ -168,17 +169,18 @@ static void ds1374_set_tlet(ulong arg)
 
 static ulong new_time;
 
-static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet,
-				(ulong) & new_time);
+static struct workqueue_struct *ds1374_workqueue;
+
+static DECLARE_WORK(ds1374_work, ds1374_set_work, &new_time);
 
 int ds1374_set_rtc_time(ulong nowtime)
 {
 	new_time = nowtime;
 
 	if (in_interrupt())
-		tasklet_schedule(&ds1374_tasklet);
+		queue_work(ds1374_workqueue, &ds1374_work);
 	else
-		ds1374_set_tlet((ulong) & new_time);
+		ds1374_set_work(&new_time);
 
 	return 0;
 }
@@ -204,6 +206,8 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
 	client->adapter = adap;
 	client->driver = &ds1374_driver;
 
+	ds1374_workqueue = create_singlethread_workqueue("ds1374");
+
 	if ((rc = i2c_attach_client(client)) != 0) {
 		kfree(client);
 		return rc;
@@ -227,7 +231,7 @@ static int ds1374_detach(struct i2c_client *client)
 
 	if ((rc = i2c_detach_client(client)) == 0) {
 		kfree(i2c_get_clientdata(client));
-		tasklet_kill(&ds1374_tasklet);
+		destroy_workqueue(ds1374_workqueue);
 	}
 	return rc;
 }
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index b5aabe7cf79..99ab4ec3439 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -25,6 +25,7 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 
 #include <asm/time.h>
 #include <asm/rtc.h>
@@ -111,7 +112,7 @@ m41t00_get_rtc_time(void)
 }
 
 static void
-m41t00_set_tlet(ulong arg)
+m41t00_set(void *arg)
 {
 	struct rtc_time	tm;
 	ulong	nowtime = *(ulong *)arg;
@@ -130,13 +131,13 @@ m41t00_set_tlet(ulong arg)
 	if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0)
 		|| (i2c_smbus_write_byte_data(save_client, 1, tm.tm_min & 0x7f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 2, tm.tm_hour & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 2, tm.tm_hour & 0x3f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 4, tm.tm_mday & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 4, tm.tm_mday & 0x3f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 5, tm.tm_mon & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 5, tm.tm_mon & 0x1f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 6, tm.tm_year & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 6, tm.tm_year & 0xff)
 			< 0))
 
 		dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n");
@@ -145,9 +146,9 @@ m41t00_set_tlet(ulong arg)
 	return;
 }
 
-static ulong	new_time;
-
-DECLARE_TASKLET_DISABLED(m41t00_tasklet, m41t00_set_tlet, (ulong)&new_time);
+static ulong new_time;
+static struct workqueue_struct *m41t00_wq;
+static DECLARE_WORK(m41t00_work, m41t00_set, &new_time);
 
 int
 m41t00_set_rtc_time(ulong nowtime)
@@ -155,9 +156,9 @@ m41t00_set_rtc_time(ulong nowtime)
 	new_time = nowtime;
 
 	if (in_interrupt())
-		tasklet_schedule(&m41t00_tasklet);
+		queue_work(m41t00_wq, &m41t00_work);
 	else
-		m41t00_set_tlet((ulong)&new_time);
+		m41t00_set(&new_time);
 
 	return 0;
 }
@@ -189,6 +190,7 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind)
 		return rc;
 	}
 
+	m41t00_wq = create_singlethread_workqueue("m41t00");
 	save_client = client;
 	return 0;
 }
@@ -206,7 +208,7 @@ m41t00_detach(struct i2c_client *client)
 
 	if ((rc = i2c_detach_client(client)) == 0) {
 		kfree(client);
-		tasklet_kill(&m41t00_tasklet);
+		destroy_workqueue(m41t00_wq);
 	}
 	return rc;
 }
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 4961f1e764a..602797a4420 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -392,6 +392,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index cf84350efc5..8b24b4f2a83 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -731,6 +731,8 @@ static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif)
 	
 	if(m5229_revision <= 0x20)
 		tmpbyte = (tmpbyte & (~0x02)) | 0x01;
+	else if (m5229_revision == 0xc7)
+		tmpbyte |= 0x03;
 	else
 		tmpbyte |= 0x01;
 
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index df9ee9a7843..900efd1da58 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -348,6 +348,7 @@ static struct pci_device_id atiixp_pci_tbl[] = {
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 6f8f8645b02..7ce5bf78368 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -798,7 +798,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.autodma	= AUTODMA,
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
-		.flags		= IDEPCI_FLAG_FORCE_PDC,
 	},{	/* 2 */
 		.name		= "PDC20263",
 		.init_setup	= init_setup_pdc202ata4,
@@ -819,7 +818,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.autodma	= AUTODMA,
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
-		.flags		= IDEPCI_FLAG_FORCE_PDC,
 	},{	/* 4 */
 		.name		= "PDC20267",
 		.init_setup	= init_setup_pdc202xx,
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 43b96e29836..27c9eb989a9 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -345,17 +345,17 @@ sgiioc4_resetproc(ide_drive_t * drive)
 static u8
 sgiioc4_INB(unsigned long port)
 {
-	u8 reg = (u8) inb(port);
+	u8 reg = (u8) readb((void __iomem *) port);
 
 	if ((port & 0xFFF) == 0x11C) {	/* Status register of IOC4 */
 		if (reg & 0x51) {	/* Not busy...check for interrupt */
 			unsigned long other_ir = port - 0x110;
-			unsigned int intr_reg = (u32) inl(other_ir);
+			unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 
 			/* Clear the Interrupt, Error bits on the IOC4 */
 			if (intr_reg & 0x03) {
-				outl(0x03, other_ir);
-				intr_reg = (u32) inl(other_ir);
+				writel(0x03, (void __iomem *) other_ir);
+				intr_reg = (u32) readl((void __iomem *) other_ir);
 			}
 		}
 	}
@@ -606,6 +606,12 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
 	hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
 	hwif->ide_dma_timeout = &__ide_dma_timeout;
+
+	/*
+	 * The IOC4 uses MMIO rather than Port IO.
+	 * It also needs special workarounds for INB.
+	 */
+	default_hwif_mmiops(hwif);
 	hwif->INB = &sgiioc4_INB;
 }
 
@@ -743,6 +749,6 @@ ioc4_ide_exit(void)
 module_init(ioc4_ide_init);
 module_exit(ioc4_ide_exit);
 
-MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
+MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78e30f80367..ffca8b63ee7 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -553,6 +553,8 @@ pmac_ide_init_hwif_ports(hw_regs_t *hw,
 
 	if (irq != NULL)
 		*irq = pmac_ide[ix].irq;
+
+	hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
 }
 
 #define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 7ebf992e8c2..462ed3006c3 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -580,7 +580,6 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
 	int port;
 	int at_least_one_hwif_enabled = 0;
 	ide_hwif_t *hwif, *mate = NULL;
-	static int secondpdc = 0;
 	u8 tmp;
 
 	index->all = 0xf0f0;
@@ -592,21 +591,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
 	for (port = 0; port <= 1; ++port) {
 		ide_pci_enablebit_t *e = &(d->enablebits[port]);
 	
-		/* 
-		 * If this is a Promise FakeRaid controller,
-		 * the 2nd controller will be marked as 
-		 * disabled while it is actually there and enabled
-		 * by the bios for raid purposes. 
-		 * Skip the normal "is it enabled" test for those.
-		 */
-		if ((d->flags & IDEPCI_FLAG_FORCE_PDC) &&
-		    (secondpdc++==1) && (port==1))
-			goto controller_ok;
-			
 		if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
 		    (tmp & e->mask) != e->val))
 			continue;	/* port not enabled */
-controller_ok:
 
 		if (d->channels	<= port)
 			break;
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 19222878aae..11f13778f13 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	 * register content.
 	 * To actually enable physical responses is the job of our interrupt
 	 * handler which programs the physical request filter. */
-	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
 
 	DBGMSG("physUpperBoundOffset=%08x",
 	       reg_read(ohci, OHCI1394_PhyUpperBound));
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index f4206604db0..5413dc43b9f 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -42,6 +42,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
+#include <linux/stringify.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/fs.h>
@@ -117,7 +118,8 @@ MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default
  */
 static int max_sectors = SBP2_MAX_SECTORS;
 module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)");
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
+		 __stringify(SBP2_MAX_SECTORS) ")");
 
 /*
  * Exclusive login to sbp2 device? In most cases, the sbp2 driver should
@@ -135,18 +137,45 @@ module_param(exclusive_login, int, 0644);
 MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");
 
 /*
- * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
- * if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows inquiry
- * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
+ * If any of the following workarounds is required for your device to work,
+ * please submit the kernel messages logged by sbp2 to the linux1394-devel
+ * mailing list.
  *
- * If force_inquiry_hack=1 is required for your device to work,
- * please submit the logged sbp2_firmware_revision value of this device to
- * the linux1394-devel mailing list.
+ * - 128kB max transfer
+ *   Limit transfer size. Necessary for some old bridges.
+ *
+ * - 36 byte inquiry
+ *   When scsi_mod probes the device, let the inquiry command look like that
+ *   from MS Windows.
+ *
+ * - skip mode page 8
+ *   Suppress sending of mode_sense for mode page 8 if the device pretends to
+ *   support the SCSI Primary Block commands instead of Reduced Block Commands.
+ *
+ * - fix capacity
+ *   Tell sd_mod to correct the last sector number reported by read_capacity.
+ *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
+ *   Don't use this with devices which don't have this bug.
+ *
+ * - override internal blacklist
+ *   Instead of adding to the built-in blacklist, use only the workarounds
+ *   specified in the module load parameter.
+ *   Useful if a blacklist entry interfered with a non-broken device.
  */
+static int sbp2_default_workarounds;
+module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
+MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
+	", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
+	", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
+	", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+	", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+	", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
+	", or a combination)");
+
+/* legacy parameter */
 static int force_inquiry_hack;
 module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
+MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
 
 /*
  * Export information about protocols/devices supported by this driver.
@@ -266,14 +295,55 @@ static struct hpsb_protocol_driver sbp2_driver = {
 };
 
 /*
- * List of device firmwares that require the inquiry hack.
- * Yields a few false positives but did not break other devices so far.
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best indicator
+ * for the type of bridge chip of a device.  It yields a few false positives
+ * but this did not break correctly behaving devices so far.
  */
-static u32 sbp2_broken_inquiry_list[] = {
-	0x00002800,	/* Stefan Richter <stefanr@s5r6.in-berlin.de> */
-			/* DViCO Momobay CX-1 */
-	0x00000200	/* Andreas Plesch <plesch@fas.harvard.edu> */
-			/* QPS Fire DVDBurner */
+static const struct {
+	u32 firmware_revision;
+	u32 model_id;
+	unsigned workarounds;
+} sbp2_workarounds_table[] = {
+	/* TSB42AA9 */ {
+		.firmware_revision	= 0x002800,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36 |
+					  SBP2_WORKAROUND_MODE_SENSE_8,
+	},
+	/* Initio bridges, actually only needed for some older ones */ {
+		.firmware_revision	= 0x000200,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36,
+	},
+	/* Symbios bridge */ {
+		.firmware_revision	= 0xa0b800,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
+	},
+	/*
+	 * Note about the following Apple iPod blacklist entries:
+	 *
+	 * There are iPods (2nd gen, 3rd gen) with model_id==0.  Since our
+	 * matching logic treats 0 as a wildcard, we cannot match this ID
+	 * without rewriting the matching routine.  Fortunately these iPods
+	 * do not feature the read_capacity bug according to one report.
+	 * Read_capacity behaviour as well as model_id could change due to
+	 * Apple-supplied firmware updates though.
+	 */
+	/* iPod 4th generation */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000021,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod mini */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000023,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod Photo */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x00007e,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	}
 };
 
 /**************************************
@@ -765,12 +835,17 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 
 	/* Register the status FIFO address range. We could use the same FIFO
 	 * for targets at different nodes. However we need different FIFOs per
-	 * target in order to support multi-unit devices. */
+	 * target in order to support multi-unit devices.
+	 * The FIFO is located out of the local host controller's physical range
+	 * but, if possible, within the posted write area. Status writes will
+	 * then be performed as unified transactions. This slightly reduces
+	 * bandwidth usage, and some Prolific based devices seem to require it.
+	 */
 	scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
 			&sbp2_highlevel, ud->ne->host, &sbp2_ops,
 			sizeof(struct sbp2_status_block), sizeof(quadlet_t),
-			~0ULL, ~0ULL);
-	if (!scsi_id->status_fifo_addr) {
+			0x010000000000ULL, CSR1212_ALL_SPACE_END);
+	if (scsi_id->status_fifo_addr == ~0ULL) {
 		SBP2_ERR("failed to allocate status FIFO address range");
 		goto failed_alloc;
 	}
@@ -1450,7 +1525,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 	struct csr1212_dentry *dentry;
 	u64 management_agent_addr;
 	u32 command_set_spec_id, command_set, unit_characteristics,
-	    firmware_revision, workarounds;
+	    firmware_revision;
+	unsigned workarounds;
 	int i;
 
 	SBP2_DEBUG_ENTER();
@@ -1506,12 +1582,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 		case SBP2_FIRMWARE_REVISION_KEY:
 			/* Firmware revision */
 			firmware_revision = kv->value.immediate;
-			if (force_inquiry_hack)
-				SBP2_INFO("sbp2_firmware_revision = %x",
-					  (unsigned int)firmware_revision);
-			else
-				SBP2_DEBUG("sbp2_firmware_revision = %x",
-					   (unsigned int)firmware_revision);
+			SBP2_DEBUG("sbp2_firmware_revision = %x",
+				   (unsigned int)firmware_revision);
 			break;
 
 		default:
@@ -1519,41 +1591,44 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 		}
 	}
 
-	/* This is the start of our broken device checking. We try to hack
-	 * around oddities and known defects.  */
-	workarounds = 0x0;
+	workarounds = sbp2_default_workarounds;
+	if (force_inquiry_hack) {
+		SBP2_WARN("force_inquiry_hack is deprecated. "
+			  "Use parameter 'workarounds' instead.");
+		workarounds |= SBP2_WORKAROUND_INQUIRY_36;
+	}
 
-	/* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a
-	 * bridge with 128KB max transfer size limitation. For sanity, we
-	 * only voice this when the current max_sectors setting
-	 * exceeds the 128k limit. By default, that is not the case.
-	 *
-	 * It would be really nice if we could detect this before the scsi
-	 * host gets initialized. That way we can down-force the
-	 * max_sectors to account for it. That is not currently
-	 * possible.  */
-	if ((firmware_revision & 0xffff00) ==
-			SBP2_128KB_BROKEN_FIRMWARE &&
-			(max_sectors * 512) > (128*1024)) {
-		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.",
-				NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-		SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!",
-				max_sectors);
-		workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER;
-	}
-
-	/* Check for a blacklisted set of devices that require us to force
-	 * a 36 byte host inquiry. This can be overriden as a module param
-	 * (to force all hosts).  */
-	for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
-		if ((firmware_revision & 0xffff00) ==
-				sbp2_broken_inquiry_list[i]) {
-			SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
-					NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-			workarounds |= SBP2_BREAKAGE_INQUIRY_HACK;
-			break; /* No need to continue. */
+	if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
+		for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+			if (sbp2_workarounds_table[i].firmware_revision &&
+			    sbp2_workarounds_table[i].firmware_revision !=
+			    (firmware_revision & 0xffff00))
+				continue;
+			if (sbp2_workarounds_table[i].model_id &&
+			    sbp2_workarounds_table[i].model_id != ud->model_id)
+				continue;
+			workarounds |= sbp2_workarounds_table[i].workarounds;
+			break;
 		}
-	}
+
+	if (workarounds)
+		SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
+			  "(firmware_revision 0x%06x, vendor_id 0x%06x,"
+			  " model_id 0x%06x)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  workarounds, firmware_revision,
+			  ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+			  ud->model_id);
+
+	/* We would need one SCSI host template for each target to adjust
+	 * max_sectors on the fly, therefore warn only. */
+	if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+			  "max transfer size. WARNING: Current max_sectors "
+			  "setting is larger than 128KB (%d sectors)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  max_sectors);
 
 	/* If this is a logical unit directory entry, process the parent
 	 * to get the values. */
@@ -2447,19 +2522,25 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
 
 	scsi_id->sdev = sdev;
 
-	if (force_inquiry_hack ||
-	    scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+	if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
 		sdev->inquiry_len = 36;
-		sdev->skip_ms_page_8 = 1;
-	}
 	return 0;
 }
 
 static int sbp2scsi_slave_configure(struct scsi_device *sdev)
 {
+	struct scsi_id_instance_data *scsi_id =
+		(struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
 	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
+
+	if (sdev->type == TYPE_DISK &&
+	    scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+		sdev->skip_ms_page_8 = 1;
+	if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+		sdev->fix_capacity = 1;
 	return 0;
 }
 
@@ -2603,7 +2684,9 @@ static int sbp2_module_init(void)
 		scsi_driver_template.cmd_per_lun = 1;
 	}
 
-	/* Set max sectors (module load option). Default is 255 sectors. */
+	if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		max_sectors = 128 * 1024 / 512;
 	scsi_driver_template.max_sectors = max_sectors;
 
 	/* Register our high level driver with 1394 stack */
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index e2d357a9ea3..f4ccc9d0fba 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -227,11 +227,6 @@ struct sbp2_status_block {
 #define SBP2_SW_VERSION_ENTRY					0x00010483
 
 /*
- * Other misc defines
- */
-#define SBP2_128KB_BROKEN_FIRMWARE				0xa0b800
-
-/*
  * SCSI specific stuff
  */
 
@@ -239,6 +234,13 @@ struct sbp2_status_block {
 #define SBP2_MAX_SECTORS		255	/* Max sectors supported */
 #define SBP2_MAX_CMDS			8	/* This should be safe */
 
+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
+#define SBP2_WORKAROUND_INQUIRY_36	0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
+#define SBP2_WORKAROUND_OVERRIDE	0x100
+
 /* This is the two dma types we use for cmd_dma below */
 enum cmd_dma_types {
 	CMD_DMA_NONE,
@@ -268,10 +270,6 @@ struct sbp2_command_info {
 
 };
 
-/* A list of flags for detected oddities and brokeness. */
-#define SBP2_BREAKAGE_128K_MAX_TRANSFER		0x1
-#define SBP2_BREAKAGE_INQUIRY_HACK		0x2
-
 struct sbp2scsi_host_info;
 
 /*
@@ -345,7 +343,7 @@ struct scsi_id_instance_data {
 	struct Scsi_Host *scsi_host;
 
 	/* Device specific workarounds/brokeness */
-	u32 workarounds;
+	unsigned workarounds;
 };
 
 /* Sbp2 host data structure (one per IEEE1394 host) */
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 7cfedb8d9bc..86fee43502c 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -34,6 +34,8 @@
  *
  * $Id: cm.c 2821 2005-07-08 17:07:28Z sean.hefty $
  */
+
+#include <linux/completion.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/idr.h>
@@ -122,7 +124,7 @@ struct cm_id_private {
 	struct rb_node service_node;
 	struct rb_node sidr_id_node;
 	spinlock_t lock;	/* Do not acquire inside cm.lock */
-	wait_queue_head_t wait;
+	struct completion comp;
 	atomic_t refcount;
 
 	struct ib_mad_send_buf *msg;
@@ -159,7 +161,7 @@ static void cm_work_handler(void *data);
 static inline void cm_deref_id(struct cm_id_private *cm_id_priv)
 {
 	if (atomic_dec_and_test(&cm_id_priv->refcount))
-		wake_up(&cm_id_priv->wait);
+		complete(&cm_id_priv->comp);
 }
 
 static int cm_alloc_msg(struct cm_id_private *cm_id_priv,
@@ -559,7 +561,7 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
 		goto error;
 
 	spin_lock_init(&cm_id_priv->lock);
-	init_waitqueue_head(&cm_id_priv->wait);
+	init_completion(&cm_id_priv->comp);
 	INIT_LIST_HEAD(&cm_id_priv->work_list);
 	atomic_set(&cm_id_priv->work_count, -1);
 	atomic_set(&cm_id_priv->refcount, 1);
@@ -724,8 +726,8 @@ retest:
 	}
 
 	cm_free_id(cm_id->local_id);
-	atomic_dec(&cm_id_priv->refcount);
-	wait_event(cm_id_priv->wait, !atomic_read(&cm_id_priv->refcount));
+	cm_deref_id(cm_id_priv);
+	wait_for_completion(&cm_id_priv->comp);
 	while ((work = cm_dequeue_work(cm_id_priv)) != NULL)
 		cm_free_work(work);
 	if (cm_id_priv->private_data && cm_id_priv->private_data_len)
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 3a702da83e4..5ad41a64314 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -228,10 +228,7 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 				goto error1;
 		}
 		/* Make sure class supplied is consistent with RMPP */
-		if (ib_is_mad_class_rmpp(mad_reg_req->mgmt_class)) {
-			if (!rmpp_version)
-				goto error1;
-		} else {
+		if (!ib_is_mad_class_rmpp(mad_reg_req->mgmt_class)) {
 			if (rmpp_version)
 				goto error1;
 		}
@@ -355,7 +352,7 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 	INIT_WORK(&mad_agent_priv->local_work, local_completions,
 		   mad_agent_priv);
 	atomic_set(&mad_agent_priv->refcount, 1);
-	init_waitqueue_head(&mad_agent_priv->wait);
+	init_completion(&mad_agent_priv->comp);
 
 	return &mad_agent_priv->agent;
 
@@ -470,7 +467,7 @@ struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device,
 	mad_snoop_priv->agent.qp = port_priv->qp_info[qpn].qp;
 	mad_snoop_priv->agent.port_num = port_num;
 	mad_snoop_priv->mad_snoop_flags = mad_snoop_flags;
-	init_waitqueue_head(&mad_snoop_priv->wait);
+	init_completion(&mad_snoop_priv->comp);
 	mad_snoop_priv->snoop_index = register_snoop_agent(
 						&port_priv->qp_info[qpn],
 						mad_snoop_priv);
@@ -489,6 +486,18 @@ error1:
 }
 EXPORT_SYMBOL(ib_register_mad_snoop);
 
+static inline void deref_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
+{
+	if (atomic_dec_and_test(&mad_agent_priv->refcount))
+		complete(&mad_agent_priv->comp);
+}
+
+static inline void deref_snoop_agent(struct ib_mad_snoop_private *mad_snoop_priv)
+{
+	if (atomic_dec_and_test(&mad_snoop_priv->refcount))
+		complete(&mad_snoop_priv->comp);
+}
+
 static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
 {
 	struct ib_mad_port_private *port_priv;
@@ -512,9 +521,8 @@ static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
 	flush_workqueue(port_priv->wq);
 	ib_cancel_rmpp_recvs(mad_agent_priv);
 
-	atomic_dec(&mad_agent_priv->refcount);
-	wait_event(mad_agent_priv->wait,
-		   !atomic_read(&mad_agent_priv->refcount));
+	deref_mad_agent(mad_agent_priv);
+	wait_for_completion(&mad_agent_priv->comp);
 
 	kfree(mad_agent_priv->reg_req);
 	ib_dereg_mr(mad_agent_priv->agent.mr);
@@ -532,9 +540,8 @@ static void unregister_mad_snoop(struct ib_mad_snoop_private *mad_snoop_priv)
 	atomic_dec(&qp_info->snoop_count);
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 
-	atomic_dec(&mad_snoop_priv->refcount);
-	wait_event(mad_snoop_priv->wait,
-		   !atomic_read(&mad_snoop_priv->refcount));
+	deref_snoop_agent(mad_snoop_priv);
+	wait_for_completion(&mad_snoop_priv->comp);
 
 	kfree(mad_snoop_priv);
 }
@@ -603,8 +610,7 @@ static void snoop_send(struct ib_mad_qp_info *qp_info,
 		spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 		mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent,
 						    send_buf, mad_send_wc);
-		if (atomic_dec_and_test(&mad_snoop_priv->refcount))
-			wake_up(&mad_snoop_priv->wait);
+		deref_snoop_agent(mad_snoop_priv);
 		spin_lock_irqsave(&qp_info->snoop_lock, flags);
 	}
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -629,8 +635,7 @@ static void snoop_recv(struct ib_mad_qp_info *qp_info,
 		spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 		mad_snoop_priv->agent.recv_handler(&mad_snoop_priv->agent,
 						   mad_recv_wc);
-		if (atomic_dec_and_test(&mad_snoop_priv->refcount))
-			wake_up(&mad_snoop_priv->wait);
+		deref_snoop_agent(mad_snoop_priv);
 		spin_lock_irqsave(&qp_info->snoop_lock, flags);
 	}
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -971,8 +976,7 @@ void ib_free_send_mad(struct ib_mad_send_buf *send_buf)
 
 	free_send_rmpp_list(mad_send_wr);
 	kfree(send_buf->mad);
-	if (atomic_dec_and_test(&mad_agent_priv->refcount))
-		wake_up(&mad_agent_priv->wait);
+	deref_mad_agent(mad_agent_priv);
 }
 EXPORT_SYMBOL(ib_free_send_mad);
 
@@ -1760,8 +1764,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
 		mad_recv_wc = ib_process_rmpp_recv_wc(mad_agent_priv,
 						      mad_recv_wc);
 		if (!mad_recv_wc) {
-			if (atomic_dec_and_test(&mad_agent_priv->refcount))
-				wake_up(&mad_agent_priv->wait);
+			deref_mad_agent(mad_agent_priv);
 			return;
 		}
 	}
@@ -1773,8 +1776,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
 		if (!mad_send_wr) {
 			spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
 			ib_free_recv_mad(mad_recv_wc);
-			if (atomic_dec_and_test(&mad_agent_priv->refcount))
-				wake_up(&mad_agent_priv->wait);
+			deref_mad_agent(mad_agent_priv);
 			return;
 		}
 		ib_mark_mad_done(mad_send_wr);
@@ -1793,8 +1795,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
 	} else {
 		mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent,
 						   mad_recv_wc);
-		if (atomic_dec_and_test(&mad_agent_priv->refcount))
-			wake_up(&mad_agent_priv->wait);
+		deref_mad_agent(mad_agent_priv);
 	}
 }
 
@@ -2024,8 +2025,7 @@ void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr,
 						   mad_send_wc);
 
 	/* Release reference on agent taken when sending */
-	if (atomic_dec_and_test(&mad_agent_priv->refcount))
-		wake_up(&mad_agent_priv->wait);
+	deref_mad_agent(mad_agent_priv);
 	return;
 done:
 	spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index 6c9c133d71e..b4fa28d3160 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -37,6 +37,7 @@
 #ifndef __IB_MAD_PRIV_H__
 #define __IB_MAD_PRIV_H__
 
+#include <linux/completion.h>
 #include <linux/pci.h>
 #include <linux/kthread.h>
 #include <linux/workqueue.h>
@@ -108,7 +109,7 @@ struct ib_mad_agent_private {
 	struct list_head rmpp_list;
 
 	atomic_t refcount;
-	wait_queue_head_t wait;
+	struct completion comp;
 };
 
 struct ib_mad_snoop_private {
@@ -117,7 +118,7 @@ struct ib_mad_snoop_private {
 	int snoop_index;
 	int mad_snoop_flags;
 	atomic_t refcount;
-	wait_queue_head_t wait;
+	struct completion comp;
 };
 
 struct ib_mad_send_wr_private {
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index dfd4e588ce0..d4704e054e3 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -49,7 +49,7 @@ struct mad_rmpp_recv {
 	struct list_head list;
 	struct work_struct timeout_work;
 	struct work_struct cleanup_work;
-	wait_queue_head_t wait;
+	struct completion comp;
 	enum rmpp_state state;
 	spinlock_t lock;
 	atomic_t refcount;
@@ -69,10 +69,16 @@ struct mad_rmpp_recv {
 	u8 method;
 };
 
+static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
+{
+	if (atomic_dec_and_test(&rmpp_recv->refcount))
+		complete(&rmpp_recv->comp);
+}
+
 static void destroy_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
 {
-	atomic_dec(&rmpp_recv->refcount);
-	wait_event(rmpp_recv->wait, !atomic_read(&rmpp_recv->refcount));
+	deref_rmpp_recv(rmpp_recv);
+	wait_for_completion(&rmpp_recv->comp);
 	ib_destroy_ah(rmpp_recv->ah);
 	kfree(rmpp_recv);
 }
@@ -253,7 +259,7 @@ create_rmpp_recv(struct ib_mad_agent_private *agent,
 		goto error;
 
 	rmpp_recv->agent = agent;
-	init_waitqueue_head(&rmpp_recv->wait);
+	init_completion(&rmpp_recv->comp);
 	INIT_WORK(&rmpp_recv->timeout_work, recv_timeout_handler, rmpp_recv);
 	INIT_WORK(&rmpp_recv->cleanup_work, recv_cleanup_handler, rmpp_recv);
 	spin_lock_init(&rmpp_recv->lock);
@@ -279,12 +285,6 @@ error:	kfree(rmpp_recv);
 	return NULL;
 }
 
-static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
-{
-	if (atomic_dec_and_test(&rmpp_recv->refcount))
-		wake_up(&rmpp_recv->wait);
-}
-
 static struct mad_rmpp_recv *
 find_rmpp_recv(struct ib_mad_agent_private *agent,
 	       struct ib_mad_recv_wc *mad_recv_wc)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 15121cb5a1f..21f9282c1b2 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -336,7 +336,7 @@ static ssize_t show_pma_counter(struct ib_port *p, struct port_attribute *attr,
 	switch (width) {
 	case 4:
 		ret = sprintf(buf, "%u\n", (out_mad->data[40 + offset / 8] >>
-					    (offset % 4)) & 0xf);
+					    (4 - (offset % 8))) & 0xf);
 		break;
 	case 8:
 		ret = sprintf(buf, "%u\n", out_mad->data[40 + offset / 8]);
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index f6a05965a4e..9164a09b6cc 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -32,6 +32,8 @@
  *
  * $Id: ucm.c 2594 2005-06-13 19:46:02Z libor $
  */
+
+#include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/module.h>
@@ -72,7 +74,7 @@ struct ib_ucm_file {
 
 struct ib_ucm_context {
 	int                 id;
-	wait_queue_head_t   wait;
+	struct completion   comp;
 	atomic_t            ref;
 	int		    events_reported;
 
@@ -138,7 +140,7 @@ static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id)
 static void ib_ucm_ctx_put(struct ib_ucm_context *ctx)
 {
 	if (atomic_dec_and_test(&ctx->ref))
-		wake_up(&ctx->wait);
+		complete(&ctx->comp);
 }
 
 static inline int ib_ucm_new_cm_id(int event)
@@ -178,7 +180,7 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file)
 		return NULL;
 
 	atomic_set(&ctx->ref, 1);
-	init_waitqueue_head(&ctx->wait);
+	init_completion(&ctx->comp);
 	ctx->file = file;
 	INIT_LIST_HEAD(&ctx->events);
 
@@ -586,8 +588,8 @@ static ssize_t ib_ucm_destroy_id(struct ib_ucm_file *file,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
-	atomic_dec(&ctx->ref);
-	wait_event(ctx->wait, !atomic_read(&ctx->ref));
+	ib_ucm_ctx_put(ctx);
+	wait_for_completion(&ctx->comp);
 
 	/* No new events will be generated after destroying the cm_id. */
 	ib_destroy_cm_id(ctx->cm_id);
diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c
index 36a32c31566..efe147dbeb4 100644
--- a/drivers/infiniband/core/uverbs_mem.c
+++ b/drivers/infiniband/core/uverbs_mem.c
@@ -211,8 +211,10 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem)
 	 */
 
 	work = kmalloc(sizeof *work, GFP_KERNEL);
-	if (!work)
+	if (!work) {
+		mmput(mm);
 		return;
+	}
 
 	INIT_WORK(&work->work, ib_umem_account, work);
 	work->mm   = mm;
diff --git a/drivers/infiniband/hw/ipath/ipath_debug.h b/drivers/infiniband/hw/ipath/ipath_debug.h
index 593e28969c6..46762387f5f 100644
--- a/drivers/infiniband/hw/ipath/ipath_debug.h
+++ b/drivers/infiniband/hw/ipath/ipath_debug.h
@@ -60,11 +60,11 @@
 #define __IPATH_KERNEL_SEND 0x2000	/* use kernel mode send */
 #define __IPATH_EPKTDBG     0x4000	/* print ethernet packet data */
 #define __IPATH_SMADBG      0x8000	/* sma packet debug */
-#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) general debug on */
-#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings on */
-#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors on */
-#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump on */
-#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump on */
+#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) gen debug */
+#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings */
+#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors */
+#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump */
+#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump */
 
 #else				/* _IPATH_DEBUGGING */
 
@@ -79,11 +79,12 @@
 #define __IPATH_TRSAMPLE  0x0	/* generate trace buffer sample entries */
 #define __IPATH_VERBDBG   0x0	/* very verbose debug */
 #define __IPATH_PKTDBG    0x0	/* print packet data */
-#define __IPATH_PROCDBG   0x0	/* print process startup (init)/exit messages */
+#define __IPATH_PROCDBG   0x0	/* process startup (init)/exit messages */
 /* print mmap/nopage stuff, not using VDBG any more */
 #define __IPATH_MMDBG     0x0
 #define __IPATH_EPKTDBG   0x0	/* print ethernet packet data */
-#define __IPATH_SMADBG    0x0   /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
+#define __IPATH_SMADBG    0x0   /* process startup (init)/exit messages */
+#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
 #define __IPATH_IPATHWARN 0x0	/* Ethernet (IPATH) warnings on   */
 #define __IPATH_IPATHERR  0x0	/* Ethernet (IPATH) errors on   */
 #define __IPATH_IPATHPD   0x0	/* Ethernet (IPATH) packet dump on   */
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index cd533cf951c..28ddceb260e 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -277,13 +277,14 @@ static int ipath_diag_open(struct inode *in, struct file *fp)
 
 bail:
 	spin_unlock_irqrestore(&ipath_devs_lock, flags);
-	mutex_unlock(&ipath_mutex);
 
 	/* Only expose a way to reset the device if we
 	   make it into diag mode. */
 	if (ret == 0)
 		ipath_expose_reset(&dd->pcidev->dev);
 
+	mutex_unlock(&ipath_mutex);
+
 	return ret;
 }
 
@@ -365,15 +366,3 @@ static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
 bail:
 	return ret;
 }
-
-void ipath_diag_bringup_link(struct ipath_devdata *dd)
-{
-	if (diag_set_link || (dd->ipath_flags & IPATH_LINKACTIVE))
-		return;
-
-	diag_set_link = 1;
-	ipath_cdbg(VERBOSE, "Trying to set to set link active for "
-		   "diag pkt\n");
-	ipath_layer_set_linkstate(dd, IPATH_IB_LINKARM);
-	ipath_layer_set_linkstate(dd, IPATH_IB_LINKACTIVE);
-}
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 58a94efb007..dddcdae736a 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -116,10 +116,9 @@ static int __devinit ipath_init_one(struct pci_dev *,
 #define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
 
 static const struct pci_device_id ipath_pci_tbl[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
-		    PCI_DEVICE_ID_INFINIPATH_HT)},
-	{PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
-		    PCI_DEVICE_ID_INFINIPATH_PE800)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
+	{ 0, }
 };
 
 MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
@@ -418,9 +417,19 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 
 	ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
 	if (ret) {
-		dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
-			 "fails: %d\n", dd->ipath_unit, ret);
-		goto bail_regions;
+		/*
+		 * if the 64 bit setup fails, try 32 bit.  Some systems
+		 * do not setup 64 bit maps on systems with 2GB or less
+		 * memory installed.
+		 */
+		ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (ret) {
+			dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
+				 "fails: %d\n", dd->ipath_unit, ret);
+			goto bail_regions;
+		}
+		else
+			ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
 	}
 
 	pci_set_master(pdev);
@@ -1729,7 +1738,7 @@ void ipath_free_pddata(struct ipath_devdata *dd, u32 port, int freehdrq)
 	}
 }
 
-int __init infinipath_init(void)
+static int __init infinipath_init(void)
 {
 	int ret;
 
@@ -1896,19 +1905,19 @@ static void __exit infinipath_cleanup(void)
 			} else
 				ipath_dbg("irq is 0, not doing free_irq "
 					  "for unit %u\n", dd->ipath_unit);
-			dd->pcidev = NULL;
-		}
 
-		/*
-		 * we check for NULL here, because it's outside the kregbase
-		 * check, and we need to call it after the free_irq.  Thus
-		 * it's possible that the function pointers were never
-		 * initialized.
-		 */
-		if (dd->ipath_f_cleanup)
-			/* clean up chip-specific stuff */
-			dd->ipath_f_cleanup(dd);
+			/*
+			 * we check for NULL here, because it's outside
+			 * the kregbase check, and we need to call it
+			 * after the free_irq.  Thus it's possible that
+			 * the function pointers were never initialized.
+			 */
+			if (dd->ipath_f_cleanup)
+				/* clean up chip-specific stuff */
+				dd->ipath_f_cleanup(dd);
 
+			dd->pcidev = NULL;
+		}
 		spin_lock_irqsave(&ipath_devs_lock, flags);
 	}
 
@@ -1949,7 +1958,7 @@ int ipath_reset_device(int unit)
 	}
 
 	if (dd->ipath_pd)
-		for (i = 1; i < dd->ipath_portcnt; i++) {
+		for (i = 1; i < dd->ipath_cfgports; i++) {
 			if (dd->ipath_pd[i] && dd->ipath_pd[i]->port_cnt) {
 				ipath_dbg("unit %u port %d is in use "
 					  "(PID %u cmd %s), can't reset\n",
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index f11a900e8cd..a2f1ceafcca 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -505,11 +505,10 @@ static u8 flash_csum(struct ipath_flash *ifp, int adjust)
  * ipath_get_guid - get the GUID from the i2c device
  * @dd: the infinipath device
  *
- * When we add the multi-chip support, we will probably have to add
- * the ability to use the number of guids field, and get the guid from
- * the first chip's flash, to use for all of them.
+ * We have the capability to use the ipath_nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
  */
-void ipath_get_guid(struct ipath_devdata *dd)
+void ipath_get_eeprom_info(struct ipath_devdata *dd)
 {
 	void *buf;
 	struct ipath_flash *ifp;
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index c347191f02b..ada267e41f6 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -139,7 +139,7 @@ static int ipath_get_base_info(struct ipath_portdata *pd,
 	kinfo->spi_piosize = dd->ipath_ibmaxlen;
 	kinfo->spi_mtu = dd->ipath_ibmaxlen;	/* maxlen, not ibmtu */
 	kinfo->spi_port = pd->port_port;
-	kinfo->spi_sw_version = IPATH_USER_SWVERSION;
+	kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
 	kinfo->spi_hw_version = dd->ipath_revision;
 
 	if (copy_to_user(ubase, kinfo, sizeof(*kinfo)))
@@ -1224,6 +1224,10 @@ static unsigned int ipath_poll(struct file *fp,
 
 	if (tail == head) {
 		set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
+		if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
+			(void)ipath_write_ureg(dd, ur_rcvhdrhead,
+					       dd->ipath_rhdrhead_intr_off
+					       | head, pd->port_port);
 		poll_wait(fp, &pd->port_wait, pt);
 
 		if (test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {
diff --git a/drivers/infiniband/hw/ipath/ipath_ht400.c b/drivers/infiniband/hw/ipath/ipath_ht400.c
index 4652435998f..fac0a2b74de 100644
--- a/drivers/infiniband/hw/ipath/ipath_ht400.c
+++ b/drivers/infiniband/hw/ipath/ipath_ht400.c
@@ -607,7 +607,12 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	case 4:		/* Ponderosa is one of the bringup boards */
 		n = "Ponderosa";
 		break;
-	case 5:		/* HT-460 original production board */
+	case 5:
+		/*
+		 * HT-460 original production board; two production levels, with
+		 * different serial number ranges.   See ipath_ht_early_init() for
+		 * case where we enable IPATH_GPIO_INTR for later serial # range.
+		 */
 		n = "InfiniPath_HT-460";
 		break;
 	case 6:
@@ -642,7 +647,7 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	if (n)
 		snprintf(name, namelen, "%s", n);
 
-	if (dd->ipath_majrev != 3 || dd->ipath_minrev != 2) {
+	if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
 		/*
 		 * This version of the driver only supports the HT-400
 		 * Rev 3.2
@@ -1520,6 +1525,18 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
 	 */
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 INFINIPATH_S_ABORT);
+
+	ipath_get_eeprom_info(dd);
+	if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
+		dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
+		/*
+		 * Later production HT-460 has same changes as HT-465, so
+		 * can use GPIO interrupts.  They have serial #'s starting
+		 * with 128, rather than 112.
+		 */
+		dd->ipath_flags |= IPATH_GPIO_INTR;
+		dd->ipath_flags &= ~IPATH_POLL_RX_INTR;
+	}
 	return 0;
 }
 
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 2823ff9c0c6..dc83250d26a 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -53,13 +53,19 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
 
 /*
  * Number of buffers reserved for driver (layered drivers and SMA
- * send).  Reserved at end of buffer list.
+ * send).  Reserved at end of buffer list.   Initialized based on
+ * number of PIO buffers if not set via module interface.
+ * The problem with this is that it's global, but we'll use different
+ * numbers for different chip types.  So the default value is not
+ * very useful.  I've redefined it for the 1.3 release so that it's
+ * zero unless set by the user to something else, in which case we
+ * try to respect it.
  */
-static ushort ipath_kpiobufs = 32;
+static ushort ipath_kpiobufs;
 
 static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
 
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint,
+module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
 		  &ipath_kpiobufs, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
 
@@ -531,8 +537,11 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	 * Don't clear ipath_flags as 8bit mode was set before
 	 * entering this func. However, we do set the linkstate to
 	 * unknown, so we can watch for a transition.
+	 * PRESENT is set because we want register reads to work,
+	 * and the kernel infrastructure saw it in config space;
+	 * We clear it if we have failures.
 	 */
-	dd->ipath_flags |= IPATH_LINKUNK;
+	dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
 	dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
 			     IPATH_LINKDOWN | IPATH_LINKINIT);
 
@@ -560,6 +569,7 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	    || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
 		ipath_dev_err(dd, "Register read failures from chip, "
 			      "giving up initialization\n");
+		dd->ipath_flags &= ~IPATH_PRESENT;
 		ret = -ENODEV;
 		goto done;
 	}
@@ -682,16 +692,14 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 	 */
 	dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
 		/ (sizeof(u64) * BITS_PER_BYTE / 2);
-	if (!ipath_kpiobufs)	/* have to have at least 1, for SMA */
-		kpiobufs = ipath_kpiobufs = 1;
-	else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) <
-		 (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) {
-		dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) "
-			 "for %u ports to have %u each!\n",
-			 dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
-			 dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT);
-		kpiobufs = 1;	/* reserve just the minimum for SMA/ether */
-	} else
+	if (ipath_kpiobufs == 0) {
+		/* not set by user, or set explictly to default  */
+		if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
+			kpiobufs = 32;
+		else
+			kpiobufs = 16;
+	}
+	else
 		kpiobufs = ipath_kpiobufs;
 
 	if (kpiobufs >
@@ -871,7 +879,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 
 done:
 	if (!ret) {
-		ipath_get_guid(dd);
 		*dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
 		if (!dd->ipath_f_intrsetup(dd)) {
 			/* now we can enable all interrupts from the chip */
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 60f5f410806..3e72a1fe3d7 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -172,8 +172,8 @@ static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
 				   "was %s\n", dd->ipath_unit,
 				   ib_linkstate(lstate),
 				   ib_linkstate((unsigned)
-				   		dd->ipath_lastibcstat
-				   		& IPATH_IBSTATE_MASK));
+						dd->ipath_lastibcstat
+						& IPATH_IBSTATE_MASK));
 	}
 	else {
 		lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
@@ -665,14 +665,14 @@ static void handle_layer_pioavail(struct ipath_devdata *dd)
 
 	ret = __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	ret = __ipath_verbs_piobufavail(dd);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	return;
-clear:
+set:
 	set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 dd->ipath_sendctrl);
@@ -719,11 +719,24 @@ static void handle_rcv(struct ipath_devdata *dd, u32 istat)
 irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 {
 	struct ipath_devdata *dd = data;
-	u32 istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+	u32 istat;
 	ipath_err_t estat = 0;
 	static unsigned unexpected = 0;
 	irqreturn_t ret;
 
+	if(!(dd->ipath_flags & IPATH_PRESENT)) {
+		/* this is mostly so we don't try to touch the chip while
+		 * it is being reset */
+		/*
+		 * This return value is perhaps odd, but we do not want the
+		 * interrupt core code to remove our interrupt handler
+		 * because we don't appear to be handling an interrupt
+		 * during a chip reset.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
 	if (unlikely(!istat)) {
 		ipath_stats.sps_nullintr++;
 		ret = IRQ_NONE; /* not our interrupt, or already handled */
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 159d0aed31a..5d92d57b6f5 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -528,7 +528,6 @@ extern spinlock_t ipath_devs_lock;
 extern struct ipath_devdata *ipath_lookup(int unit);
 
 extern u16 ipath_layer_rcv_opcode;
-extern int ipath_verbs_registered;
 extern int __ipath_layer_intr(struct ipath_devdata *, u32);
 extern int ipath_layer_intr(struct ipath_devdata *, u32);
 extern int __ipath_layer_rcv(struct ipath_devdata *, void *,
@@ -651,7 +650,7 @@ u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
 void ipath_init_pe800_funcs(struct ipath_devdata *);
 /* init HT-400-specific func */
 void ipath_init_ht400_funcs(struct ipath_devdata *);
-void ipath_get_guid(struct ipath_devdata *);
+void ipath_get_eeprom_info(struct ipath_devdata *);
 u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
 
 /*
@@ -732,7 +731,7 @@ u64 ipath_read_kreg64_port(const struct ipath_devdata *, ipath_kreg,
 static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
 				    ipath_ureg regno, int port)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readl(regno + (u64 __iomem *)
@@ -763,7 +762,7 @@ static inline void ipath_write_ureg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 	return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
 }
@@ -771,7 +770,7 @@ static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 
 	return readq(&dd->ipath_kregbase[regno]);
@@ -787,7 +786,7 @@ static inline void ipath_write_kreg(const struct ipath_devdata *dd,
 static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 				  ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readq(regno + (u64 __iomem *)
@@ -798,7 +797,7 @@ static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
 					 ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 	return readl(regno + (u64 __iomem *)
 		     (dd->ipath_cregbase +
diff --git a/drivers/infiniband/hw/ipath/ipath_keys.c b/drivers/infiniband/hw/ipath/ipath_keys.c
index aa33b0e9f2f..5ae8761f9dd 100644
--- a/drivers/infiniband/hw/ipath/ipath_keys.c
+++ b/drivers/infiniband/hw/ipath/ipath_keys.c
@@ -136,9 +136,7 @@ int ipath_lkey_ok(struct ipath_lkey_table *rkt, struct ipath_sge *isge,
 		ret = 1;
 		goto bail;
 	}
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != sge->lkey)) {
 		ret = 0;
 		goto bail;
@@ -184,8 +182,6 @@ bail:
  * @acc: access flags
  *
  * Return 1 if successful, otherwise 0.
- *
- * The QP r_rq.lock should be held.
  */
 int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 		  u32 len, u64 vaddr, u32 rkey, int acc)
@@ -196,9 +192,7 @@ int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 	size_t off;
 	int ret;
 
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != rkey)) {
 		ret = 0;
 		goto bail;
diff --git a/drivers/infiniband/hw/ipath/ipath_layer.c b/drivers/infiniband/hw/ipath/ipath_layer.c
index 2cabf634057..9ec4ac77b87 100644
--- a/drivers/infiniband/hw/ipath/ipath_layer.c
+++ b/drivers/infiniband/hw/ipath/ipath_layer.c
@@ -46,13 +46,15 @@
 /* Acquire before ipath_devs_lock. */
 static DEFINE_MUTEX(ipath_layer_mutex);
 
+static int ipath_verbs_registered;
+
 u16 ipath_layer_rcv_opcode;
+
 static int (*layer_intr)(void *, u32);
 static int (*layer_rcv)(void *, void *, struct sk_buff *);
 static int (*layer_rcv_lid)(void *, void *);
 static int (*verbs_piobufavail)(void *);
 static void (*verbs_rcv)(void *, void *, void *, u32);
-int ipath_verbs_registered;
 
 static void *(*layer_add_one)(int, struct ipath_devdata *);
 static void (*layer_remove_one)(void *);
@@ -586,6 +588,8 @@ void ipath_verbs_unregister(void)
 	verbs_rcv = NULL;
 	verbs_timer_cb = NULL;
 
+	ipath_verbs_registered = 0;
+
 	mutex_unlock(&ipath_layer_mutex);
 }
 
@@ -868,12 +872,13 @@ static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss,
 		update_sge(ss, len);
 		length -= len;
 	}
+	/* Update address before sending packet. */
+	update_sge(ss, length);
 	/* must flush early everything before trigger word */
 	ipath_flush_wc();
 	__raw_writel(last, piobuf);
 	/* be sure trigger word is written */
 	ipath_flush_wc();
-	update_sge(ss, length);
 }
 
 /**
@@ -939,17 +944,18 @@ int ipath_verbs_send(struct ipath_devdata *dd, u32 hdrwords,
 	if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
 		   !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
 		u32 w;
+		u32 *addr = (u32 *) ss->sge.vaddr;
 
+		/* Update address before sending packet. */
+		update_sge(ss, len);
 		/* Need to round up for the last dword in the packet. */
 		w = (len + 3) >> 2;
-		__iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
+		__iowrite32_copy(piobuf, addr, w - 1);
 		/* must flush early everything before trigger word */
 		ipath_flush_wc();
-		__raw_writel(((u32 *) ss->sge.vaddr)[w - 1],
-			     piobuf + w - 1);
+		__raw_writel(addr[w - 1], piobuf + w - 1);
 		/* be sure trigger word is written */
 		ipath_flush_wc();
-		update_sge(ss, len);
 		ret = 0;
 		goto bail;
 	}
diff --git a/drivers/infiniband/hw/ipath/ipath_pe800.c b/drivers/infiniband/hw/ipath/ipath_pe800.c
index e693a7a8266..02e8c75b24f 100644
--- a/drivers/infiniband/hw/ipath/ipath_pe800.c
+++ b/drivers/infiniband/hw/ipath/ipath_pe800.c
@@ -305,8 +305,8 @@ static const struct ipath_cregs ipath_pe_cregs = {
  * we'll print them and continue.  We reuse the same message buffer as
  * ipath_handle_errors() to avoid excessive stack usage.
  */
-void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
-	size_t msgl)
+static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
+				     size_t msgl)
 {
 	ipath_err_t hwerrs;
 	u32 bits, ctrl;
@@ -552,7 +552,7 @@ static int ipath_pe_boardname(struct ipath_devdata *dd, char *name,
  * freeze mode), and enable hardware errors as errors (along with
  * everything else) in errormask
  */
-void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
+static void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
 {
 	ipath_err_t val;
 	u64 extsval;
@@ -577,7 +577,7 @@ void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
  * ipath_pe_bringup_serdes - bring up the serdes
  * @dd: the infinipath device
  */
-int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
+static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
 {
 	u64 val, tmp, config1;
 	int ret = 0, change = 0;
@@ -694,7 +694,7 @@ int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
  * @dd: the infinipath device
  * Called when driver is being unloaded
  */
-void ipath_pe_quiet_serdes(struct ipath_devdata *dd)
+static void ipath_pe_quiet_serdes(struct ipath_devdata *dd)
 {
 	u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
 
@@ -972,6 +972,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 	/* Use ERROR so it shows up in logs, etc. */
 	ipath_dev_err(dd, "Resetting PE-800 unit %u\n",
 		      dd->ipath_unit);
+	/* keep chip from being accessed in a few places */
+	dd->ipath_flags &= ~(IPATH_INITTED|IPATH_PRESENT);
 	val = dd->ipath_control | INFINIPATH_C_RESET;
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val);
 	mb();
@@ -997,6 +999,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 		if ((r = pci_enable_device(dd->pcidev)))
 			ipath_dev_err(dd, "pci_enable_device failed after "
 				      "reset: %d\n", r);
+		/* whether it worked or not, mark as present, again */
+		dd->ipath_flags |= IPATH_PRESENT;
 		val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
 		if (val == dd->ipath_revision) {
 			ipath_cdbg(VERBOSE, "Got matching revision "
@@ -1176,6 +1180,8 @@ static int ipath_pe_early_init(struct ipath_devdata *dd)
 	 */
 	dd->ipath_rhdrhead_intr_off = 1ULL<<32;
 
+	ipath_get_eeprom_info(dd);
+
 	return 0;
 }
 
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index 6058d70d757..9f8855d970c 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -188,8 +188,8 @@ static void free_qpn(struct ipath_qp_table *qpt, u32 qpn)
  * Allocate the next available QPN and put the QP into the hash table.
  * The hash table holds a reference to the QP.
  */
-int ipath_alloc_qpn(struct ipath_qp_table *qpt, struct ipath_qp *qp,
-		    enum ib_qp_type type)
+static int ipath_alloc_qpn(struct ipath_qp_table *qpt, struct ipath_qp *qp,
+			   enum ib_qp_type type)
 {
 	unsigned long flags;
 	u32 qpn;
@@ -232,7 +232,7 @@ bail:
  * Remove the QP from the table so it can't be found asynchronously by
  * the receive interrupt routine.
  */
-void ipath_free_qp(struct ipath_qp_table *qpt, struct ipath_qp *qp)
+static void ipath_free_qp(struct ipath_qp_table *qpt, struct ipath_qp *qp)
 {
 	struct ipath_qp *q, **qpp;
 	unsigned long flags;
@@ -358,6 +358,65 @@ static void ipath_reset_qp(struct ipath_qp *qp)
 }
 
 /**
+ * ipath_error_qp - put a QP into an error state
+ * @qp: the QP to put into an error state
+ *
+ * Flushes both send and receive work queues.
+ * QP r_rq.lock and s_lock should be held.
+ */
+
+static void ipath_error_qp(struct ipath_qp *qp)
+{
+	struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+	struct ib_wc wc;
+
+	_VERBS_INFO("QP%d/%d in error state\n",
+		    qp->ibqp.qp_num, qp->remote_qpn);
+
+	spin_lock(&dev->pending_lock);
+	/* XXX What if its already removed by the timeout code? */
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
+	spin_unlock(&dev->pending_lock);
+
+	wc.status = IB_WC_WR_FLUSH_ERR;
+	wc.vendor_err = 0;
+	wc.byte_len = 0;
+	wc.imm_data = 0;
+	wc.qp_num = qp->ibqp.qp_num;
+	wc.src_qp = 0;
+	wc.wc_flags = 0;
+	wc.pkey_index = 0;
+	wc.slid = 0;
+	wc.sl = 0;
+	wc.dlid_path_bits = 0;
+	wc.port_num = 0;
+
+	while (qp->s_last != qp->s_head) {
+		struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
+
+		wc.wr_id = wqe->wr.wr_id;
+		wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+		if (++qp->s_last >= qp->s_size)
+			qp->s_last = 0;
+		ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1);
+	}
+	qp->s_cur = qp->s_tail = qp->s_head;
+	qp->s_hdrwords = 0;
+	qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
+
+	wc.opcode = IB_WC_RECV;
+	while (qp->r_rq.tail != qp->r_rq.head) {
+		wc.wr_id = get_rwqe_ptr(&qp->r_rq, qp->r_rq.tail)->wr_id;
+		if (++qp->r_rq.tail >= qp->r_rq.size)
+			qp->r_rq.tail = 0;
+		ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
+	}
+}
+
+/**
  * ipath_modify_qp - modify the attributes of a queue pair
  * @ibqp: the queue pair who's attributes we're modifying
  * @attr: the new attributes
@@ -368,6 +427,7 @@ static void ipath_reset_qp(struct ipath_qp *qp)
 int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		    int attr_mask)
 {
+	struct ipath_ibdev *dev = to_idev(ibqp->device);
 	struct ipath_qp *qp = to_iqp(ibqp);
 	enum ib_qp_state cur_state, new_state;
 	unsigned long flags;
@@ -384,6 +444,19 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				attr_mask))
 		goto inval;
 
+	if (attr_mask & IB_QP_AV)
+		if (attr->ah_attr.dlid == 0 ||
+		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
+			goto inval;
+
+	if (attr_mask & IB_QP_PKEY_INDEX)
+		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
+			goto inval;
+
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
+		if (attr->min_rnr_timer > 31)
+			goto inval;
+
 	switch (new_state) {
 	case IB_QPS_RESET:
 		ipath_reset_qp(qp);
@@ -398,13 +471,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 
 	}
 
-	if (attr_mask & IB_QP_PKEY_INDEX) {
-		struct ipath_ibdev *dev = to_idev(ibqp->device);
-
-		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
-			goto inval;
+	if (attr_mask & IB_QP_PKEY_INDEX)
 		qp->s_pkey_index = attr->pkey_index;
-	}
 
 	if (attr_mask & IB_QP_DEST_QPN)
 		qp->remote_qpn = attr->dest_qp_num;
@@ -420,12 +488,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	if (attr_mask & IB_QP_ACCESS_FLAGS)
 		qp->qp_access_flags = attr->qp_access_flags;
 
-	if (attr_mask & IB_QP_AV) {
-		if (attr->ah_attr.dlid == 0 ||
-		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
-			goto inval;
+	if (attr_mask & IB_QP_AV)
 		qp->remote_ah_attr = attr->ah_attr;
-	}
 
 	if (attr_mask & IB_QP_PATH_MTU)
 		qp->path_mtu = attr->path_mtu;
@@ -440,11 +504,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		qp->s_rnr_retry_cnt = qp->s_rnr_retry;
 	}
 
-	if (attr_mask & IB_QP_MIN_RNR_TIMER) {
-		if (attr->min_rnr_timer > 31)
-			goto inval;
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
 		qp->s_min_rnr_timer = attr->min_rnr_timer;
-	}
 
 	if (attr_mask & IB_QP_QKEY)
 		qp->qkey = attr->qkey;
@@ -651,10 +712,8 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 			     init_attr->qp_type == IB_QPT_RC ?
 			     ipath_do_rc_send : ipath_do_uc_send,
 			     (unsigned long)qp);
-		qp->piowait.next = LIST_POISON1;
-		qp->piowait.prev = LIST_POISON2;
-		qp->timerwait.next = LIST_POISON1;
-		qp->timerwait.prev = LIST_POISON2;
+		INIT_LIST_HEAD(&qp->piowait);
+		INIT_LIST_HEAD(&qp->timerwait);
 		qp->state = IB_QPS_RESET;
 		qp->s_wq = swq;
 		qp->s_size = init_attr->cap.max_send_wr + 1;
@@ -675,7 +734,7 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 		ipath_reset_qp(qp);
 
 		/* Tell the core driver that the kernel SMA is present. */
-		if (qp->ibqp.qp_type == IB_QPT_SMI)
+		if (init_attr->qp_type == IB_QPT_SMI)
 			ipath_layer_set_verbs_flags(dev->dd,
 						    IPATH_VERBS_KERNEL_SMA);
 		break;
@@ -724,10 +783,10 @@ int ipath_destroy_qp(struct ib_qp *ibqp)
 
 	/* Make sure the QP isn't on the timeout list. */
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/*
@@ -796,10 +855,10 @@ void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc)
 
 	spin_lock(&dev->pending_lock);
 	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock(&dev->pending_lock);
 
 	ipath_cq_enter(to_icq(qp->ibqp.send_cq), wc, 1);
@@ -821,65 +880,6 @@ void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc)
 }
 
 /**
- * ipath_error_qp - put a QP into an error state
- * @qp: the QP to put into an error state
- *
- * Flushes both send and receive work queues.
- * QP r_rq.lock and s_lock should be held.
- */
-
-void ipath_error_qp(struct ipath_qp *qp)
-{
-	struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
-	struct ib_wc wc;
-
-	_VERBS_INFO("QP%d/%d in error state\n",
-		    qp->ibqp.qp_num, qp->remote_qpn);
-
-	spin_lock(&dev->pending_lock);
-	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
-	spin_unlock(&dev->pending_lock);
-
-	wc.status = IB_WC_WR_FLUSH_ERR;
-	wc.vendor_err = 0;
-	wc.byte_len = 0;
-	wc.imm_data = 0;
-	wc.qp_num = qp->ibqp.qp_num;
-	wc.src_qp = 0;
-	wc.wc_flags = 0;
-	wc.pkey_index = 0;
-	wc.slid = 0;
-	wc.sl = 0;
-	wc.dlid_path_bits = 0;
-	wc.port_num = 0;
-
-	while (qp->s_last != qp->s_head) {
-		struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
-
-		wc.wr_id = wqe->wr.wr_id;
-		wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
-		if (++qp->s_last >= qp->s_size)
-			qp->s_last = 0;
-		ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1);
-	}
-	qp->s_cur = qp->s_tail = qp->s_head;
-	qp->s_hdrwords = 0;
-	qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
-
-	wc.opcode = IB_WC_RECV;
-	while (qp->r_rq.tail != qp->r_rq.head) {
-		wc.wr_id = get_rwqe_ptr(&qp->r_rq, qp->r_rq.tail)->wr_id;
-		if (++qp->r_rq.tail >= qp->r_rq.size)
-			qp->r_rq.tail = 0;
-		ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
-	}
-}
-
-/**
  * ipath_get_credit - flush the send work queue of a QP
  * @qp: the qp who's send work queue to flush
  * @aeth: the Acknowledge Extended Transport Header
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index a4055ca0061..493b1821a93 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -57,7 +57,7 @@ static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
 	qp->s_len = wqe->length - len;
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next == LIST_POISON1)
+	if (list_empty(&qp->timerwait))
 		list_add_tail(&qp->timerwait,
 			      &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);
@@ -356,7 +356,7 @@ static inline int ipath_make_rc_req(struct ipath_qp *qp,
 		if ((int)(qp->s_psn - qp->s_next_psn) > 0)
 			qp->s_next_psn = qp->s_psn;
 		spin_lock(&dev->pending_lock);
-		if (qp->timerwait.next == LIST_POISON1)
+		if (list_empty(&qp->timerwait))
 			list_add_tail(&qp->timerwait,
 				      &dev->pending[dev->pending_index]);
 		spin_unlock(&dev->pending_lock);
@@ -726,8 +726,8 @@ void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc)
 	 */
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	if (wqe->wr.opcode == IB_WR_RDMA_READ)
@@ -886,8 +886,8 @@ static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode)
 	 * just won't find anything to restart if we ACK everything.
 	 */
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	/*
@@ -1194,8 +1194,7 @@ static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev,
 		     IB_WR_RDMA_READ))
 		goto ack_done;
 	spin_lock(&dev->pending_lock);
-	if (qp->s_rnr_timeout == 0 &&
-	    qp->timerwait.next != LIST_POISON1)
+	if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
 		list_move_tail(&qp->timerwait,
 			       &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);
diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h
index 1e59750c5f6..402126eb79c 100644
--- a/drivers/infiniband/hw/ipath/ipath_registers.h
+++ b/drivers/infiniband/hw/ipath/ipath_registers.h
@@ -34,8 +34,9 @@
 #define _IPATH_REGISTERS_H
 
 /*
- * This file should only be included by kernel source, and by the diags.
- * It defines the registers, and their contents, for the InfiniPath HT-400 chip
+ * This file should only be included by kernel source, and by the diags.  It
+ * defines the registers, and their contents, for the InfiniPath HT-400
+ * chip.
  */
 
 /*
@@ -156,8 +157,10 @@
 #define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
 #define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
-#define INFINIPATH_IBCC_LINKINITCMD_POLL 2	/* cycle through TS1/TS2 till OK */
-#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3	/* wait for TS1, then go on */
+/* cycle through TS1/TS2 till OK */
+#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
 #define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
 #define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKCMD_INIT 1	/* move to 0x11 */
@@ -182,7 +185,8 @@
 #define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
 #define INFINIPATH_IBCS_TXREADY       0x40000000
 #define INFINIPATH_IBCS_TXCREDITOK    0x80000000
-/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
+/* link training states (shift by
+   INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
 #define INFINIPATH_IBCS_LT_STATE_DISABLED	0x00
 #define INFINIPATH_IBCS_LT_STATE_LINKUP		0x01
 #define INFINIPATH_IBCS_LT_STATE_POLLACTIVE	0x02
@@ -267,10 +271,12 @@
 /* kr_serdesconfig0 bits */
 #define INFINIPATH_SERDC0_RESET_MASK  0xfULL	/* overal reset bits */
 #define INFINIPATH_SERDC0_RESET_PLL   0x10000000ULL	/* pll reset */
-#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL	/* tx idle enables (per lane) */
-#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL	/* rx detect enables (per lane) */
-#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL	/* L1 Power down; use with RXDETECT,
-							   Otherwise not used on IB side */
+/* tx idle enables (per lane) */
+#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL
+/* rx detect enables (per lane) */
+#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
+/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
+#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL
 
 /* kr_xgxsconfig bits */
 #define INFINIPATH_XGXS_RESET          0x7ULL
@@ -390,12 +396,13 @@ struct ipath_kregs {
 	ipath_kreg kr_txintmemsize;
 	ipath_kreg kr_xgxsconfig;
 	ipath_kreg kr_ibpllcfg;
-	/* use these two (and the following N ports) only with ipath_k*_kreg64_port();
-	 * not *kreg64() */
+	/* use these two (and the following N ports) only with
+	 * ipath_k*_kreg64_port(); not *kreg64() */
 	ipath_kreg kr_rcvhdraddr;
 	ipath_kreg kr_rcvhdrtailaddr;
 
-	/* remaining registers are not present on all types of infinipath chips  */
+	/* remaining registers are not present on all types of infinipath
+	   chips  */
 	ipath_kreg kr_rcvpktledcnt;
 	ipath_kreg kr_pcierbuftestreg0;
 	ipath_kreg kr_pcierbuftestreg1;
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index f232e77b78e..d38f4f3cfd1 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -435,7 +435,7 @@ void ipath_no_bufs_available(struct ipath_qp *qp, struct ipath_ibdev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->piowait.next == LIST_POISON1)
+	if (list_empty(&qp->piowait))
 		list_add_tail(&qp->piowait, &dev->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 	/*
@@ -531,19 +531,12 @@ int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
 	}
 	wqe->wr.num_sge = j;
 	qp->s_head = next;
-	/*
-	 * Wake up the send tasklet if the QP is not waiting
-	 * for an RNR timeout.
-	 */
-	next = qp->s_rnr_timeout;
 	spin_unlock_irqrestore(&qp->s_lock, flags);
 
-	if (next == 0) {
-		if (qp->ibqp.qp_type == IB_QPT_UC)
-			ipath_do_uc_send((unsigned long) qp);
-		else
-			ipath_do_rc_send((unsigned long) qp);
-	}
+	if (qp->ibqp.qp_type == IB_QPT_UC)
+		ipath_do_uc_send((unsigned long) qp);
+	else
+		ipath_do_rc_send((unsigned long) qp);
 
 	ret = 0;
 
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index 32acd8048b4..f323791cc49 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -711,10 +711,22 @@ static struct attribute_group dev_attr_group = {
  * enters diag mode.  A device reset is quite likely to crash the
  * machine entirely, so we don't want to normally make it
  * available.
+ *
+ * Called with ipath_mutex held.
  */
 int ipath_expose_reset(struct device *dev)
 {
-	return device_create_file(dev, &dev_attr_reset);
+	static int exposed;
+	int ret;
+
+	if (!exposed) {
+		ret = device_create_file(dev, &dev_attr_reset);
+		exposed = 1;
+	}
+	else
+		ret = 0;
+
+	return ret;
 }
 
 int ipath_driver_create_group(struct device_driver *drv)
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 5ff3de6128b..e606daf8321 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -46,8 +46,10 @@
  * This is called from ipath_post_ud_send() to forward a WQE addressed
  * to the same HCA.
  */
-void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
-		       u32 length, struct ib_send_wr *wr, struct ib_wc *wc)
+static void ipath_ud_loopback(struct ipath_qp *sqp,
+			      struct ipath_sge_state *ss,
+			      u32 length, struct ib_send_wr *wr,
+			      struct ib_wc *wc)
 {
 	struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
 	struct ipath_qp *qp;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 9f27fd35cdb..28fdbdaa789 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -41,7 +41,7 @@
 /* Not static, because we don't want the compiler removing it */
 const char ipath_verbs_version[] = "ipath_verbs " IPATH_IDSTR;
 
-unsigned int ib_ipath_qp_table_size = 251;
+static unsigned int ib_ipath_qp_table_size = 251;
 module_param_named(qp_table_size, ib_ipath_qp_table_size, uint, S_IRUGO);
 MODULE_PARM_DESC(qp_table_size, "QP table size");
 
@@ -87,7 +87,7 @@ const enum ib_wc_opcode ib_ipath_wc_opcode[] = {
 /*
  * System image GUID.
  */
-__be64 sys_image_guid;
+static __be64 sys_image_guid;
 
 /**
  * ipath_copy_sge - copy data to SGE memory
@@ -449,7 +449,6 @@ static void ipath_ib_timer(void *arg)
 {
 	struct ipath_ibdev *dev = (struct ipath_ibdev *) arg;
 	struct ipath_qp *resend = NULL;
-	struct ipath_qp *rnr = NULL;
 	struct list_head *last;
 	struct ipath_qp *qp;
 	unsigned long flags;
@@ -465,32 +464,18 @@ static void ipath_ib_timer(void *arg)
 	last = &dev->pending[dev->pending_index];
 	while (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
-		if (last->next == LIST_POISON1 ||
-		    last->next != &qp->timerwait ||
-		    qp->timerwait.prev != last) {
-			INIT_LIST_HEAD(last);
-		} else {
-			list_del(&qp->timerwait);
-			qp->timerwait.prev = (struct list_head *) resend;
-			resend = qp;
-			atomic_inc(&qp->refcount);
-		}
+		list_del_init(&qp->timerwait);
+		qp->timer_next = resend;
+		resend = qp;
+		atomic_inc(&qp->refcount);
 	}
 	last = &dev->rnrwait;
 	if (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
 		if (--qp->s_rnr_timeout == 0) {
 			do {
-				if (last->next == LIST_POISON1 ||
-				    last->next != &qp->timerwait ||
-				    qp->timerwait.prev != last) {
-					INIT_LIST_HEAD(last);
-					break;
-				}
-				list_del(&qp->timerwait);
-				qp->timerwait.prev =
-					(struct list_head *) rnr;
-				rnr = qp;
+				list_del_init(&qp->timerwait);
+				tasklet_hi_schedule(&qp->s_task);
 				if (list_empty(last))
 					break;
 				qp = list_entry(last->next, struct ipath_qp,
@@ -530,8 +515,7 @@ static void ipath_ib_timer(void *arg)
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/* XXX What if timer fires again while this is running? */
-	for (qp = resend; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev) {
+	for (qp = resend; qp != NULL; qp = qp->timer_next) {
 		struct ib_wc wc;
 
 		spin_lock_irqsave(&qp->s_lock, flags);
@@ -545,9 +529,6 @@ static void ipath_ib_timer(void *arg)
 		if (atomic_dec_and_test(&qp->refcount))
 			wake_up(&qp->wait);
 	}
-	for (qp = rnr; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev)
-		tasklet_hi_schedule(&qp->s_task);
 }
 
 /**
@@ -556,9 +537,9 @@ static void ipath_ib_timer(void *arg)
  *
  * This is called from ipath_intr() at interrupt level when a PIO buffer is
  * available after ipath_verbs_send() returned an error that no buffers were
- * available.  Return 0 if we consumed all the PIO buffers and we still have
+ * available.  Return 1 if we consumed all the PIO buffers and we still have
  * QPs waiting for buffers (for now, just do a tasklet_hi_schedule and
- * return one).
+ * return zero).
  */
 static int ipath_ib_piobufavail(void *arg)
 {
@@ -573,13 +554,13 @@ static int ipath_ib_piobufavail(void *arg)
 	while (!list_empty(&dev->piowait)) {
 		qp = list_entry(dev->piowait.next, struct ipath_qp,
 				piowait);
-		list_del(&qp->piowait);
+		list_del_init(&qp->piowait);
 		tasklet_hi_schedule(&qp->s_task);
 	}
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 bail:
-	return 1;
+	return 0;
 }
 
 static int ipath_query_device(struct ib_device *ibdev,
@@ -970,6 +951,7 @@ static void *ipath_register_ib_device(int unit, struct ipath_devdata *dd)
 	idev->dd = dd;
 
 	strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
+	dev->owner = THIS_MODULE;
 	dev->node_guid = ipath_layer_get_guid(dd);
 	dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
 	dev->uverbs_cmd_mask =
@@ -1110,7 +1092,7 @@ static void ipath_unregister_ib_device(void *arg)
 	ib_dealloc_device(ibdev);
 }
 
-int __init ipath_verbs_init(void)
+static int __init ipath_verbs_init(void)
 {
 	return ipath_verbs_register(ipath_register_ib_device,
 				    ipath_unregister_ib_device,
@@ -1118,33 +1100,33 @@ int __init ipath_verbs_init(void)
 				    ipath_ib_timer);
 }
 
-void __exit ipath_verbs_cleanup(void)
+static void __exit ipath_verbs_cleanup(void)
 {
 	ipath_verbs_unregister();
 }
 
 static ssize_t show_rev(struct class_device *cdev, char *buf)
 {
-        struct ipath_ibdev *dev =
-                container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
-        int vendor, boardrev, majrev, minrev;
+	struct ipath_ibdev *dev =
+		container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
+	int vendor, boardrev, majrev, minrev;
 
-        ipath_layer_query_device(dev->dd, &vendor, &boardrev,
-                                 &majrev, &minrev);
-        return sprintf(buf, "%d.%d\n", majrev, minrev);
+	ipath_layer_query_device(dev->dd, &vendor, &boardrev,
+				 &majrev, &minrev);
+	return sprintf(buf, "%d.%d\n", majrev, minrev);
 }
 
 static ssize_t show_hca(struct class_device *cdev, char *buf)
 {
-        struct ipath_ibdev *dev =
-                container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
-        int ret;
+	struct ipath_ibdev *dev =
+		container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
+	int ret;
 
-        ret = ipath_layer_get_boardname(dev->dd, buf, 128);
-        if (ret < 0)
-                goto bail;
-        strcat(buf, "\n");
-        ret = strlen(buf);
+	ret = ipath_layer_get_boardname(dev->dd, buf, 128);
+	if (ret < 0)
+		goto bail;
+	strcat(buf, "\n");
+	ret = strlen(buf);
 
 bail:
 	return ret;
@@ -1152,40 +1134,40 @@ bail:
 
 static ssize_t show_stats(struct class_device *cdev, char *buf)
 {
-        struct ipath_ibdev *dev =
-                container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
-        int i;
-        int len;
-
-        len = sprintf(buf,
-                      "RC resends  %d\n"
-                      "RC QACKs    %d\n"
-                      "RC ACKs     %d\n"
-                      "RC SEQ NAKs %d\n"
-                      "RC RDMA seq %d\n"
-                      "RC RNR NAKs %d\n"
-                      "RC OTH NAKs %d\n"
-                      "RC timeouts %d\n"
-                      "RC RDMA dup %d\n"
-                      "piobuf wait %d\n"
-                      "no piobuf   %d\n"
-                      "PKT drops   %d\n"
-                      "WQE errs    %d\n",
-                      dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
-                      dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
-                      dev->n_other_naks, dev->n_timeouts,
-                      dev->n_rdma_dup_busy, dev->n_piowait,
-                      dev->n_no_piobuf, dev->n_pkt_drops, dev->n_wqe_errs);
-        for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
+	struct ipath_ibdev *dev =
+		container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
+	int i;
+	int len;
+
+	len = sprintf(buf,
+		      "RC resends  %d\n"
+		      "RC no QACK  %d\n"
+		      "RC ACKs     %d\n"
+		      "RC SEQ NAKs %d\n"
+		      "RC RDMA seq %d\n"
+		      "RC RNR NAKs %d\n"
+		      "RC OTH NAKs %d\n"
+		      "RC timeouts %d\n"
+		      "RC RDMA dup %d\n"
+		      "piobuf wait %d\n"
+		      "no piobuf   %d\n"
+		      "PKT drops   %d\n"
+		      "WQE errs    %d\n",
+		      dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
+		      dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
+		      dev->n_other_naks, dev->n_timeouts,
+		      dev->n_rdma_dup_busy, dev->n_piowait,
+		      dev->n_no_piobuf, dev->n_pkt_drops, dev->n_wqe_errs);
+	for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
 		const struct ipath_opcode_stats *si = &dev->opstats[i];
 
-                if (!si->n_packets && !si->n_bytes)
-                        continue;
-                len += sprintf(buf + len, "%02x %llu/%llu\n", i,
+		if (!si->n_packets && !si->n_bytes)
+			continue;
+		len += sprintf(buf + len, "%02x %llu/%llu\n", i,
 			       (unsigned long long) si->n_packets,
-                               (unsigned long long) si->n_bytes);
-        }
-        return len;
+			       (unsigned long long) si->n_bytes);
+	}
+	return len;
 }
 
 static CLASS_DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
@@ -1194,25 +1176,25 @@ static CLASS_DEVICE_ATTR(board_id, S_IRUGO, show_hca, NULL);
 static CLASS_DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
 
 static struct class_device_attribute *ipath_class_attributes[] = {
-        &class_device_attr_hw_rev,
-        &class_device_attr_hca_type,
-        &class_device_attr_board_id,
-        &class_device_attr_stats
+	&class_device_attr_hw_rev,
+	&class_device_attr_hca_type,
+	&class_device_attr_board_id,
+	&class_device_attr_stats
 };
 
 static int ipath_verbs_register_sysfs(struct ib_device *dev)
 {
-        int i;
+	int i;
 	int ret;
 
-        for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i)
-                if (class_device_create_file(&dev->class_dev,
-                                             ipath_class_attributes[i])) {
-                        ret = 1;
+	for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i)
+		if (class_device_create_file(&dev->class_dev,
+					     ipath_class_attributes[i])) {
+			ret = 1;
 			goto bail;
 		}
 
-        ret = 0;
+	ret = 0;
 
 bail:
 	return ret;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h
index b824632b2a8..4f8d59300e9 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.h
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.h
@@ -282,7 +282,8 @@ struct ipath_srq {
  */
 struct ipath_qp {
 	struct ib_qp ibqp;
-	struct ipath_qp *next;	/* link list for QPN hash table */
+	struct ipath_qp *next;		/* link list for QPN hash table */
+	struct ipath_qp *timer_next;	/* link list for ipath_ib_timer() */
 	struct list_head piowait;	/* link for wait PIO buf */
 	struct list_head timerwait;	/* link for waiting for timeouts */
 	struct ib_ah_attr remote_ah_attr;
@@ -577,8 +578,6 @@ int ipath_init_qp_table(struct ipath_ibdev *idev, int size);
 
 void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc);
 
-void ipath_error_qp(struct ipath_qp *qp);
-
 void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
 
 void ipath_do_rc_send(unsigned long data);
@@ -607,9 +606,6 @@ void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
 
 void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc);
 
-void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
-		       u32 length, struct ib_send_wr *wr, struct ib_wc *wc);
-
 int ipath_post_ud_send(struct ipath_qp *qp, struct ib_send_wr *wr);
 
 void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
diff --git a/drivers/infiniband/hw/ipath/ips_common.h b/drivers/infiniband/hw/ipath/ips_common.h
index 410a764dfce..ab7cbbbfd03 100644
--- a/drivers/infiniband/hw/ipath/ips_common.h
+++ b/drivers/infiniband/hw/ipath/ips_common.h
@@ -95,7 +95,7 @@ struct ether_header {
 	__u8 seq_num;
 	__le32 len;
 	/* MUST be of word size due to PIO write requirements */
-	__u32 csum;
+	__le32 csum;
 	__le16 csum_offset;
 	__le16 flags;
 	__u16 first_2_bytes;
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 1985b5dfa48..798e13e14fa 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -182,7 +182,7 @@ struct mthca_cmd_context {
 	u8                status;
 };
 
-static int fw_cmd_doorbell = 1;
+static int fw_cmd_doorbell = 0;
 module_param(fw_cmd_doorbell, int, 0644);
 MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
 		 "(and supported by FW)");
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index 312cf90731e..205854e9c66 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -238,9 +238,9 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
 	spin_lock(&dev->cq_table.lock);
 
 	cq = mthca_array_get(&dev->cq_table.cq, cqn & (dev->limits.num_cqs - 1));
-
 	if (cq)
-		atomic_inc(&cq->refcount);
+		++cq->refcount;
+
 	spin_unlock(&dev->cq_table.lock);
 
 	if (!cq) {
@@ -254,8 +254,10 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
 	if (cq->ibcq.event_handler)
 		cq->ibcq.event_handler(&event, cq->ibcq.cq_context);
 
-	if (atomic_dec_and_test(&cq->refcount))
+	spin_lock(&dev->cq_table.lock);
+	if (!--cq->refcount)
 		wake_up(&cq->wait);
+	spin_unlock(&dev->cq_table.lock);
 }
 
 static inline int is_recv_cqe(struct mthca_cqe *cqe)
@@ -267,23 +269,13 @@ static inline int is_recv_cqe(struct mthca_cqe *cqe)
 		return !(cqe->is_send & 0x80);
 }
 
-void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
+void mthca_cq_clean(struct mthca_dev *dev, struct mthca_cq *cq, u32 qpn,
 		    struct mthca_srq *srq)
 {
-	struct mthca_cq *cq;
 	struct mthca_cqe *cqe;
 	u32 prod_index;
 	int nfreed = 0;
 
-	spin_lock_irq(&dev->cq_table.lock);
-	cq = mthca_array_get(&dev->cq_table.cq, cqn & (dev->limits.num_cqs - 1));
-	if (cq)
-		atomic_inc(&cq->refcount);
-	spin_unlock_irq(&dev->cq_table.lock);
-
-	if (!cq)
-		return;
-
 	spin_lock_irq(&cq->lock);
 
 	/*
@@ -301,7 +293,7 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
 
 	if (0)
 		mthca_dbg(dev, "Cleaning QPN %06x from CQN %06x; ci %d, pi %d\n",
-			  qpn, cqn, cq->cons_index, prod_index);
+			  qpn, cq->cqn, cq->cons_index, prod_index);
 
 	/*
 	 * Now sweep backwards through the CQ, removing CQ entries
@@ -325,8 +317,6 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
 	}
 
 	spin_unlock_irq(&cq->lock);
-	if (atomic_dec_and_test(&cq->refcount))
-		wake_up(&cq->wait);
 }
 
 void mthca_cq_resize_copy_cqes(struct mthca_cq *cq)
@@ -821,7 +811,7 @@ int mthca_init_cq(struct mthca_dev *dev, int nent,
 	}
 
 	spin_lock_init(&cq->lock);
-	atomic_set(&cq->refcount, 1);
+	cq->refcount = 1;
 	init_waitqueue_head(&cq->wait);
 
 	memset(cq_context, 0, sizeof *cq_context);
@@ -896,6 +886,17 @@ err_out:
 	return err;
 }
 
+static inline int get_cq_refcount(struct mthca_dev *dev, struct mthca_cq *cq)
+{
+	int c;
+
+	spin_lock_irq(&dev->cq_table.lock);
+	c = cq->refcount;
+	spin_unlock_irq(&dev->cq_table.lock);
+
+	return c;
+}
+
 void mthca_free_cq(struct mthca_dev *dev,
 		   struct mthca_cq *cq)
 {
@@ -929,6 +930,7 @@ void mthca_free_cq(struct mthca_dev *dev,
 	spin_lock_irq(&dev->cq_table.lock);
 	mthca_array_clear(&dev->cq_table.cq,
 			  cq->cqn & (dev->limits.num_cqs - 1));
+	--cq->refcount;
 	spin_unlock_irq(&dev->cq_table.lock);
 
 	if (dev->mthca_flags & MTHCA_FLAG_MSI_X)
@@ -936,8 +938,7 @@ void mthca_free_cq(struct mthca_dev *dev,
 	else
 		synchronize_irq(dev->pdev->irq);
 
-	atomic_dec(&cq->refcount);
-	wait_event(cq->wait, !atomic_read(&cq->refcount));
+	wait_event(cq->wait, !get_cq_refcount(dev, cq));
 
 	if (cq->is_kernel) {
 		mthca_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 4c1dcb4c182..f8160b8de09 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -496,7 +496,7 @@ void mthca_free_cq(struct mthca_dev *dev,
 void mthca_cq_completion(struct mthca_dev *dev, u32 cqn);
 void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
 		    enum ib_event_type event_type);
-void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
+void mthca_cq_clean(struct mthca_dev *dev, struct mthca_cq *cq, u32 qpn,
 		    struct mthca_srq *srq);
 void mthca_cq_resize_copy_cqes(struct mthca_cq *cq);
 int mthca_alloc_cq_buf(struct mthca_dev *dev, struct mthca_cq_buf *buf, int nent);
diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
index f235c7ea42f..4730863ece9 100644
--- a/drivers/infiniband/hw/mthca/mthca_mad.c
+++ b/drivers/infiniband/hw/mthca/mthca_mad.c
@@ -49,7 +49,7 @@ enum {
 	MTHCA_VENDOR_CLASS2 = 0xa
 };
 
-int mthca_update_rate(struct mthca_dev *dev, u8 port_num)
+static int mthca_update_rate(struct mthca_dev *dev, u8 port_num)
 {
 	struct ib_port_attr *tprops = NULL;
 	int                  ret;
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index 25e1c1db9a4..a486dec1707 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -761,6 +761,7 @@ void mthca_arbel_fmr_unmap(struct mthca_dev *dev, struct mthca_fmr *fmr)
 
 int __devinit mthca_init_mr_table(struct mthca_dev *dev)
 {
+	unsigned long addr;
 	int err, i;
 
 	err = mthca_alloc_init(&dev->mr_table.mpt_alloc,
@@ -796,9 +797,12 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
 			goto err_fmr_mpt;
 		}
 
+		addr = pci_resource_start(dev->pdev, 4) +
+			((pci_resource_len(dev->pdev, 4) - 1) &
+			 dev->mr_table.mpt_base);
+
 		dev->mr_table.tavor_fmr.mpt_base =
-			ioremap(dev->mr_table.mpt_base,
-				(1 << i) * sizeof (struct mthca_mpt_entry));
+			ioremap(addr, (1 << i) * sizeof(struct mthca_mpt_entry));
 
 		if (!dev->mr_table.tavor_fmr.mpt_base) {
 			mthca_warn(dev, "MPT ioremap for FMR failed.\n");
@@ -806,9 +810,12 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
 			goto err_fmr_mpt;
 		}
 
+		addr = pci_resource_start(dev->pdev, 4) +
+			((pci_resource_len(dev->pdev, 4) - 1) &
+			 dev->mr_table.mtt_base);
+
 		dev->mr_table.tavor_fmr.mtt_base =
-			ioremap(dev->mr_table.mtt_base,
-				(1 << i) * MTHCA_MTT_SEG_SIZE);
+			ioremap(addr, (1 << i) * MTHCA_MTT_SEG_SIZE);
 		if (!dev->mr_table.tavor_fmr.mtt_base) {
 			mthca_warn(dev, "MTT ioremap for FMR failed.\n");
 			err = -ENOMEM;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 565a24b1756..a2eae8a3016 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -306,7 +306,7 @@ static int mthca_query_gid(struct ib_device *ibdev, u8 port,
 		goto out;
 	}
 
-	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 16, 8);
+	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 8, 8);
 
  out:
 	kfree(in_mad);
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h
index 6676a786d69..179a8f610d0 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.h
+++ b/drivers/infiniband/hw/mthca/mthca_provider.h
@@ -139,11 +139,12 @@ struct mthca_ah {
  * a qp may be locked, with the send cq locked first.  No other
  * nesting should be done.
  *
- * Each struct mthca_cq/qp also has an atomic_t ref count.  The
- * pointer from the cq/qp_table to the struct counts as one reference.
- * This reference also is good for access through the consumer API, so
- * modifying the CQ/QP etc doesn't need to take another reference.
- * Access because of a completion being polled does need a reference.
+ * Each struct mthca_cq/qp also has an ref count, protected by the
+ * corresponding table lock.  The pointer from the cq/qp_table to the
+ * struct counts as one reference.  This reference also is good for
+ * access through the consumer API, so modifying the CQ/QP etc doesn't
+ * need to take another reference.  Access to a QP because of a
+ * completion being polled does not need a reference either.
  *
  * Finally, each struct mthca_cq/qp has a wait_queue_head_t for the
  * destroy function to sleep on.
@@ -159,8 +160,9 @@ struct mthca_ah {
  * - decrement ref count; if zero, wake up waiters
  *
  * To destroy a CQ/QP, we can do the following:
- * - lock cq/qp_table, remove pointer, unlock cq/qp_table lock
- * - decrement ref count
+ * - lock cq/qp_table
+ * - remove pointer and decrement ref count
+ * - unlock cq/qp_table lock
  * - wait_event until ref count is zero
  *
  * It is the consumer's responsibilty to make sure that no QP
@@ -197,7 +199,7 @@ struct mthca_cq_resize {
 struct mthca_cq {
 	struct ib_cq		ibcq;
 	spinlock_t		lock;
-	atomic_t		refcount;
+	int			refcount;
 	int			cqn;
 	u32			cons_index;
 	struct mthca_cq_buf	buf;
@@ -217,7 +219,7 @@ struct mthca_cq {
 struct mthca_srq {
 	struct ib_srq		ibsrq;
 	spinlock_t		lock;
-	atomic_t		refcount;
+	int			refcount;
 	int			srqn;
 	int			max;
 	int			max_gs;
@@ -254,7 +256,7 @@ struct mthca_wq {
 
 struct mthca_qp {
 	struct ib_qp           ibqp;
-	atomic_t               refcount;
+	int                    refcount;
 	u32                    qpn;
 	int                    is_direct;
 	u8                     port; /* for SQP and memfree use only */
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index f37b0e36732..07c13be07a4 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -240,7 +240,7 @@ void mthca_qp_event(struct mthca_dev *dev, u32 qpn,
 	spin_lock(&dev->qp_table.lock);
 	qp = mthca_array_get(&dev->qp_table.qp, qpn & (dev->limits.num_qps - 1));
 	if (qp)
-		atomic_inc(&qp->refcount);
+		++qp->refcount;
 	spin_unlock(&dev->qp_table.lock);
 
 	if (!qp) {
@@ -257,8 +257,10 @@ void mthca_qp_event(struct mthca_dev *dev, u32 qpn,
 	if (qp->ibqp.event_handler)
 		qp->ibqp.event_handler(&event, qp->ibqp.qp_context);
 
-	if (atomic_dec_and_test(&qp->refcount))
+	spin_lock(&dev->qp_table.lock);
+	if (!--qp->refcount)
 		wake_up(&qp->wait);
+	spin_unlock(&dev->qp_table.lock);
 }
 
 static int to_mthca_state(enum ib_qp_state ib_state)
@@ -833,10 +835,10 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 	 * entries and reinitialize the QP.
 	 */
 	if (new_state == IB_QPS_RESET && !qp->ibqp.uobject) {
-		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn,
+		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq), qp->qpn,
 			       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 		if (qp->ibqp.send_cq != qp->ibqp.recv_cq)
-			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn,
+			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
 				       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 
 		mthca_wq_init(&qp->sq);
@@ -1096,7 +1098,7 @@ static int mthca_alloc_qp_common(struct mthca_dev *dev,
 	int ret;
 	int i;
 
-	atomic_set(&qp->refcount, 1);
+	qp->refcount = 1;
 	init_waitqueue_head(&qp->wait);
 	qp->state    	 = IB_QPS_RESET;
 	qp->atomic_rd_en = 0;
@@ -1318,6 +1320,17 @@ int mthca_alloc_sqp(struct mthca_dev *dev,
 	return err;
 }
 
+static inline int get_qp_refcount(struct mthca_dev *dev, struct mthca_qp *qp)
+{
+	int c;
+
+	spin_lock_irq(&dev->qp_table.lock);
+	c = qp->refcount;
+	spin_unlock_irq(&dev->qp_table.lock);
+
+	return c;
+}
+
 void mthca_free_qp(struct mthca_dev *dev,
 		   struct mthca_qp *qp)
 {
@@ -1339,14 +1352,14 @@ void mthca_free_qp(struct mthca_dev *dev,
 	spin_lock(&dev->qp_table.lock);
 	mthca_array_clear(&dev->qp_table.qp,
 			  qp->qpn & (dev->limits.num_qps - 1));
+	--qp->refcount;
 	spin_unlock(&dev->qp_table.lock);
 
 	if (send_cq != recv_cq)
 		spin_unlock(&recv_cq->lock);
 	spin_unlock_irq(&send_cq->lock);
 
-	atomic_dec(&qp->refcount);
-	wait_event(qp->wait, !atomic_read(&qp->refcount));
+	wait_event(qp->wait, !get_qp_refcount(dev, qp));
 
 	if (qp->state != IB_QPS_RESET)
 		mthca_MODIFY_QP(dev, qp->state, IB_QPS_RESET, qp->qpn, 0,
@@ -1358,10 +1371,10 @@ void mthca_free_qp(struct mthca_dev *dev,
 	 * unref the mem-free tables and free the QPN in our table.
 	 */
 	if (!qp->ibqp.uobject) {
-		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn,
+		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq), qp->qpn,
 			       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 		if (qp->ibqp.send_cq != qp->ibqp.recv_cq)
-			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn,
+			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
 				       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 
 		mthca_free_memfree(dev, qp);
@@ -1714,23 +1727,7 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 
 	ind = qp->rq.next_ind;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
-			doorbell[1] = cpu_to_be32(qp->qpn << 8);
-
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
-			size0 = 0;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
 			mthca_err(dev, "RQ %06x full (%u head, %u tail,"
 					" %d max, %d nreq)\n", qp->qpn,
@@ -1784,6 +1781,23 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		++ind;
 		if (unlikely(ind >= qp->rq.max))
 			ind -= qp->rq.max;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
+			doorbell[1] = cpu_to_be32(qp->qpn << 8);
+
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
+			size0 = 0;
+		}
 	}
 
 out:
diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c
index adcaf85355a..b292fefa3b4 100644
--- a/drivers/infiniband/hw/mthca/mthca_srq.c
+++ b/drivers/infiniband/hw/mthca/mthca_srq.c
@@ -241,7 +241,7 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd,
 		goto err_out_mailbox;
 
 	spin_lock_init(&srq->lock);
-	atomic_set(&srq->refcount, 1);
+	srq->refcount = 1;
 	init_waitqueue_head(&srq->wait);
 
 	if (mthca_is_memfree(dev))
@@ -308,6 +308,17 @@ err_out:
 	return err;
 }
 
+static inline int get_srq_refcount(struct mthca_dev *dev, struct mthca_srq *srq)
+{
+	int c;
+
+	spin_lock_irq(&dev->srq_table.lock);
+	c = srq->refcount;
+	spin_unlock_irq(&dev->srq_table.lock);
+
+	return c;
+}
+
 void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq)
 {
 	struct mthca_mailbox *mailbox;
@@ -329,10 +340,10 @@ void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq)
 	spin_lock_irq(&dev->srq_table.lock);
 	mthca_array_clear(&dev->srq_table.srq,
 			  srq->srqn & (dev->limits.num_srqs - 1));
+	--srq->refcount;
 	spin_unlock_irq(&dev->srq_table.lock);
 
-	atomic_dec(&srq->refcount);
-	wait_event(srq->wait, !atomic_read(&srq->refcount));
+	wait_event(srq->wait, !get_srq_refcount(dev, srq));
 
 	if (!srq->ibsrq.uobject) {
 		mthca_free_srq_buf(dev, srq);
@@ -414,7 +425,7 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
 	spin_lock(&dev->srq_table.lock);
 	srq = mthca_array_get(&dev->srq_table.srq, srqn & (dev->limits.num_srqs - 1));
 	if (srq)
-		atomic_inc(&srq->refcount);
+		++srq->refcount;
 	spin_unlock(&dev->srq_table.lock);
 
 	if (!srq) {
@@ -431,8 +442,10 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
 	srq->ibsrq.event_handler(&event, srq->ibsrq.srq_context);
 
 out:
-	if (atomic_dec_and_test(&srq->refcount))
+	spin_lock(&dev->srq_table.lock);
+	if (!--srq->refcount)
 		wake_up(&srq->wait);
+	spin_unlock(&dev->srq_table.lock);
 }
 
 /*
@@ -477,26 +490,7 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 	first_ind = srq->first_free;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
-			doorbell[1] = cpu_to_be32(srq->srqn << 8);
-
-			/*
-			 * Make sure that descriptors are written
-			 * before doorbell is rung.
-			 */
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			first_ind = srq->first_free;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		ind = srq->first_free;
 
 		if (ind < 0) {
@@ -556,6 +550,26 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 		srq->wrid[ind]  = wr->wr_id;
 		srq->first_free = next_ind;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
+			doorbell[1] = cpu_to_be32(srq->srqn << 8);
+
+			/*
+			 * Make sure that descriptors are written
+			 * before doorbell is rung.
+			 */
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			first_ind = srq->first_free;
+		}
 	}
 
 	if (likely(nreq)) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index a54da42849a..8406839b91c 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -275,6 +275,7 @@ static void ipoib_ib_handle_wc(struct net_device *dev,
 		spin_lock_irqsave(&priv->tx_lock, flags);
 		++priv->tx_tail;
 		if (netif_queue_stopped(dev) &&
+		    test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) &&
 		    priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1)
 			netif_wake_queue(dev);
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 4ca175553f9..f887780e809 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -158,10 +158,8 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
 		if (priv->pkey == pkey) {
 			unregister_netdev(priv->dev);
 			ipoib_dev_cleanup(priv->dev);
-
 			list_del(&priv->list);
-
-			kfree(priv);
+			free_netdev(priv->dev);
 
 			ret = 0;
 			break;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 5f2b3f6e4c4..9cbdffa08dc 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -340,7 +340,10 @@ static void srp_disconnect_target(struct srp_target_port *target)
 	/* XXX should send SRP_I_LOGOUT request */
 
 	init_completion(&target->done);
-	ib_send_cm_dreq(target->cm_id, NULL, 0);
+	if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+		printk(KERN_DEBUG PFX "Sending CM DREQ failed\n");
+		return;
+	}
 	wait_for_completion(&target->done);
 }
 
@@ -351,7 +354,6 @@ static void srp_remove_work(void *target_ptr)
 	spin_lock_irq(target->scsi_host->host_lock);
 	if (target->state != SRP_TARGET_DEAD) {
 		spin_unlock_irq(target->scsi_host->host_lock);
-		scsi_host_put(target->scsi_host);
 		return;
 	}
 	target->state = SRP_TARGET_REMOVED;
@@ -365,8 +367,6 @@ static void srp_remove_work(void *target_ptr)
 	ib_destroy_cm_id(target->cm_id);
 	srp_free_target_ib(target);
 	scsi_host_put(target->scsi_host);
-	/* And another put to really free the target port... */
-	scsi_host_put(target->scsi_host);
 }
 
 static int srp_connect_target(struct srp_target_port *target)
@@ -409,6 +409,34 @@ static int srp_connect_target(struct srp_target_port *target)
 	}
 }
 
+static void srp_unmap_data(struct scsi_cmnd *scmnd,
+			   struct srp_target_port *target,
+			   struct srp_request *req)
+{
+	struct scatterlist *scat;
+	int nents;
+
+	if (!scmnd->request_buffer ||
+	    (scmnd->sc_data_direction != DMA_TO_DEVICE &&
+	     scmnd->sc_data_direction != DMA_FROM_DEVICE))
+		return;
+
+	/*
+	 * This handling of non-SG commands can be killed when the
+	 * SCSI midlayer no longer generates non-SG commands.
+	 */
+	if (likely(scmnd->use_sg)) {
+		nents = scmnd->use_sg;
+		scat  = scmnd->request_buffer;
+	} else {
+		nents = 1;
+		scat  = &req->fake_sg;
+	}
+
+	dma_unmap_sg(target->srp_host->dev->dma_device, scat, nents,
+		     scmnd->sc_data_direction);
+}
+
 static int srp_reconnect_target(struct srp_target_port *target)
 {
 	struct ib_cm_id *new_cm_id;
@@ -455,16 +483,16 @@ static int srp_reconnect_target(struct srp_target_port *target)
 	list_for_each_entry(req, &target->req_queue, list) {
 		req->scmnd->result = DID_RESET << 16;
 		req->scmnd->scsi_done(req->scmnd);
+		srp_unmap_data(req->scmnd, target, req);
 	}
 
 	target->rx_head	 = 0;
 	target->tx_head	 = 0;
 	target->tx_tail  = 0;
-	target->req_head = 0;
-	for (i = 0; i < SRP_SQ_SIZE - 1; ++i)
-		target->req_ring[i].next = i + 1;
-	target->req_ring[SRP_SQ_SIZE - 1].next = -1;
+	INIT_LIST_HEAD(&target->free_reqs);
 	INIT_LIST_HEAD(&target->req_queue);
+	for (i = 0; i < SRP_SQ_SIZE; ++i)
+		list_add_tail(&target->req_ring[i].list, &target->free_reqs);
 
 	ret = srp_connect_target(target);
 	if (ret)
@@ -589,32 +617,10 @@ static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_target_port *target,
 	return len;
 }
 
-static void srp_unmap_data(struct scsi_cmnd *scmnd,
-			   struct srp_target_port *target,
-			   struct srp_request *req)
+static void srp_remove_req(struct srp_target_port *target, struct srp_request *req)
 {
-	struct scatterlist *scat;
-	int nents;
-
-	if (!scmnd->request_buffer ||
-	    (scmnd->sc_data_direction != DMA_TO_DEVICE &&
-	     scmnd->sc_data_direction != DMA_FROM_DEVICE))
-		return;
-
-	/*
-	 * This handling of non-SG commands can be killed when the
-	 * SCSI midlayer no longer generates non-SG commands.
-	 */
-	if (likely(scmnd->use_sg)) {
-		nents = scmnd->use_sg;
-		scat  = scmnd->request_buffer;
-	} else {
-		nents = 1;
-		scat  = &req->fake_sg;
-	}
-
-	dma_unmap_sg(target->srp_host->dev->dma_device, scat, nents,
-		     scmnd->sc_data_direction);
+	srp_unmap_data(req->scmnd, target, req);
+	list_move_tail(&req->list, &target->free_reqs);
 }
 
 static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
@@ -639,7 +645,7 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
 			req->tsk_status = rsp->data[3];
 		complete(&req->done);
 	} else {
-		scmnd 	      = req->scmnd;
+		scmnd = req->scmnd;
 		if (!scmnd)
 			printk(KERN_ERR "Null scmnd for RSP w/tag %016llx\n",
 			       (unsigned long long) rsp->tag);
@@ -657,16 +663,11 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
 		else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER))
 			scmnd->resid = be32_to_cpu(rsp->data_in_res_cnt);
 
-		srp_unmap_data(scmnd, target, req);
-
 		if (!req->tsk_mgmt) {
-			req->scmnd = NULL;
 			scmnd->host_scribble = (void *) -1L;
 			scmnd->scsi_done(scmnd);
 
-			list_del(&req->list);
-			req->next = target->req_head;
-			target->req_head = rsp->tag & ~SRP_TAG_TSK_MGMT;
+			srp_remove_req(target, req);
 		} else
 			req->cmd_done = 1;
 	}
@@ -853,7 +854,6 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
 	struct srp_request *req;
 	struct srp_iu *iu;
 	struct srp_cmd *cmd;
-	long req_index;
 	int len;
 
 	if (target->state == SRP_TARGET_CONNECTING)
@@ -873,22 +873,20 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
 	dma_sync_single_for_cpu(target->srp_host->dev->dma_device, iu->dma,
 				SRP_MAX_IU_LEN, DMA_TO_DEVICE);
 
-	req_index = target->req_head;
+	req = list_entry(target->free_reqs.next, struct srp_request, list);
 
 	scmnd->scsi_done     = done;
 	scmnd->result        = 0;
-	scmnd->host_scribble = (void *) req_index;
+	scmnd->host_scribble = (void *) (long) req->index;
 
 	cmd = iu->buf;
 	memset(cmd, 0, sizeof *cmd);
 
 	cmd->opcode = SRP_CMD;
 	cmd->lun    = cpu_to_be64((u64) scmnd->device->lun << 48);
-	cmd->tag    = req_index;
+	cmd->tag    = req->index;
 	memcpy(cmd->cdb, scmnd->cmnd, scmnd->cmd_len);
 
-	req = &target->req_ring[req_index];
-
 	req->scmnd    = scmnd;
 	req->cmd      = iu;
 	req->cmd_done = 0;
@@ -913,8 +911,7 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
 		goto err_unmap;
 	}
 
-	target->req_head = req->next;
-	list_add_tail(&req->list, &target->req_queue);
+	list_move_tail(&req->list, &target->req_queue);
 
 	return 0;
 
@@ -1137,30 +1134,20 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
 	return 0;
 }
 
-static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
+static int srp_send_tsk_mgmt(struct srp_target_port *target,
+			     struct srp_request *req, u8 func)
 {
-	struct srp_target_port *target = host_to_target(scmnd->device->host);
-	struct srp_request *req;
 	struct srp_iu *iu;
 	struct srp_tsk_mgmt *tsk_mgmt;
-	int req_index;
-	int ret = FAILED;
 
 	spin_lock_irq(target->scsi_host->host_lock);
 
 	if (target->state == SRP_TARGET_DEAD ||
 	    target->state == SRP_TARGET_REMOVED) {
-		scmnd->result = DID_BAD_TARGET << 16;
+		req->scmnd->result = DID_BAD_TARGET << 16;
 		goto out;
 	}
 
-	if (scmnd->host_scribble == (void *) -1L)
-		goto out;
-
-	req_index = (long) scmnd->host_scribble;
-	printk(KERN_ERR "Abort for req_index %d\n", req_index);
-
-	req = &target->req_ring[req_index];
 	init_completion(&req->done);
 
 	iu = __srp_get_tx_iu(target);
@@ -1171,10 +1158,10 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
 	memset(tsk_mgmt, 0, sizeof *tsk_mgmt);
 
 	tsk_mgmt->opcode 	= SRP_TSK_MGMT;
-	tsk_mgmt->lun 		= cpu_to_be64((u64) scmnd->device->lun << 48);
-	tsk_mgmt->tag 		= req_index | SRP_TAG_TSK_MGMT;
+	tsk_mgmt->lun 		= cpu_to_be64((u64) req->scmnd->device->lun << 48);
+	tsk_mgmt->tag 		= req->index | SRP_TAG_TSK_MGMT;
 	tsk_mgmt->tsk_mgmt_func = func;
-	tsk_mgmt->task_tag 	= req_index;
+	tsk_mgmt->task_tag 	= req->index;
 
 	if (__srp_post_send(target, iu, sizeof *tsk_mgmt))
 		goto out;
@@ -1182,39 +1169,85 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
 	req->tsk_mgmt = iu;
 
 	spin_unlock_irq(target->scsi_host->host_lock);
+
 	if (!wait_for_completion_timeout(&req->done,
 					 msecs_to_jiffies(SRP_ABORT_TIMEOUT_MS)))
-		return FAILED;
-	spin_lock_irq(target->scsi_host->host_lock);
+		return -1;
 
-	if (req->cmd_done) {
-		list_del(&req->list);
-		req->next = target->req_head;
-		target->req_head = req_index;
-
-		scmnd->scsi_done(scmnd);
-	} else if (!req->tsk_status) {
-		scmnd->result = DID_ABORT << 16;
-		ret = SUCCESS;
-	}
+	return 0;
 
 out:
 	spin_unlock_irq(target->scsi_host->host_lock);
-	return ret;
+	return -1;
+}
+
+static int srp_find_req(struct srp_target_port *target,
+			struct scsi_cmnd *scmnd,
+			struct srp_request **req)
+{
+	if (scmnd->host_scribble == (void *) -1L)
+		return -1;
+
+	*req = &target->req_ring[(long) scmnd->host_scribble];
+
+	return 0;
 }
 
 static int srp_abort(struct scsi_cmnd *scmnd)
 {
+	struct srp_target_port *target = host_to_target(scmnd->device->host);
+	struct srp_request *req;
+	int ret = SUCCESS;
+
 	printk(KERN_ERR "SRP abort called\n");
 
-	return srp_send_tsk_mgmt(scmnd, SRP_TSK_ABORT_TASK);
+	if (srp_find_req(target, scmnd, &req))
+		return FAILED;
+	if (srp_send_tsk_mgmt(target, req, SRP_TSK_ABORT_TASK))
+		return FAILED;
+
+	spin_lock_irq(target->scsi_host->host_lock);
+
+	if (req->cmd_done) {
+		srp_remove_req(target, req);
+		scmnd->scsi_done(scmnd);
+	} else if (!req->tsk_status) {
+		srp_remove_req(target, req);
+		scmnd->result = DID_ABORT << 16;
+	} else
+		ret = FAILED;
+
+	spin_unlock_irq(target->scsi_host->host_lock);
+
+	return ret;
 }
 
 static int srp_reset_device(struct scsi_cmnd *scmnd)
 {
+	struct srp_target_port *target = host_to_target(scmnd->device->host);
+	struct srp_request *req, *tmp;
+
 	printk(KERN_ERR "SRP reset_device called\n");
 
-	return srp_send_tsk_mgmt(scmnd, SRP_TSK_LUN_RESET);
+	if (srp_find_req(target, scmnd, &req))
+		return FAILED;
+	if (srp_send_tsk_mgmt(target, req, SRP_TSK_LUN_RESET))
+		return FAILED;
+	if (req->tsk_status)
+		return FAILED;
+
+	spin_lock_irq(target->scsi_host->host_lock);
+
+	list_for_each_entry_safe(req, tmp, &target->req_queue, list)
+		if (req->scmnd->device == scmnd->device) {
+			req->scmnd->result = DID_RESET << 16;
+			req->scmnd->scsi_done(req->scmnd);
+			srp_remove_req(target, req);
+		}
+
+	spin_unlock_irq(target->scsi_host->host_lock);
+
+	return SUCCESS;
 }
 
 static int srp_reset_host(struct scsi_cmnd *scmnd)
@@ -1514,10 +1547,12 @@ static ssize_t srp_create_target(struct class_device *class_dev,
 
 	INIT_WORK(&target->work, srp_reconnect_work, target);
 
-	for (i = 0; i < SRP_SQ_SIZE - 1; ++i)
-		target->req_ring[i].next = i + 1;
-	target->req_ring[SRP_SQ_SIZE - 1].next = -1;
+	INIT_LIST_HEAD(&target->free_reqs);
 	INIT_LIST_HEAD(&target->req_queue);
+	for (i = 0; i < SRP_SQ_SIZE; ++i) {
+		target->req_ring[i].index = i;
+		list_add_tail(&target->req_ring[i].list, &target->free_reqs);
+	}
 
 	ret = srp_parse_options(buf, target);
 	if (ret)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index bd7f7c3115d..c5cd43aae86 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -101,7 +101,7 @@ struct srp_request {
 	 */
 	struct scatterlist	fake_sg;
 	struct completion	done;
-	short			next;
+	short			index;
 	u8			cmd_done;
 	u8			tsk_status;
 };
@@ -133,7 +133,7 @@ struct srp_target_port {
 	unsigned		tx_tail;
 	struct srp_iu	       *tx_ring[SRP_SQ_SIZE + 1];
 
-	int			req_head;
+	struct list_head	free_reqs;
 	struct list_head	req_queue;
 	struct srp_request	req_ring[SRP_SQ_SIZE];
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index a34e3d91d9e..ba325f16d07 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -403,6 +403,27 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
 		case EVIOCGID:
 			if (copy_to_user(p, &dev->id, sizeof(struct input_id)))
 				return -EFAULT;
+			return 0;
+
+		case EVIOCGREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (put_user(dev->rep[REP_DELAY], ip))
+				return -EFAULT;
+			if (put_user(dev->rep[REP_PERIOD], ip + 1))
+				return -EFAULT;
+			return 0;
+
+		case EVIOCSREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (get_user(u, ip))
+				return -EFAULT;
+			if (get_user(v, ip + 1))
+				return -EFAULT;
+
+			input_event(dev, EV_REP, REP_DELAY, u);
+			input_event(dev, EV_REP, REP_PERIOD, v);
 
 			return 0;
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index a935abeffff..3038c268917 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -155,6 +155,9 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
 			if (code > SND_MAX || !test_bit(code, dev->sndbit))
 				return;
 
+			if (!!test_bit(code, dev->snd) != !!value)
+				change_bit(code, dev->snd);
+
 			if (dev->event) dev->event(dev, type, code, value);
 
 			break;
@@ -286,19 +289,19 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
 	for (; id->flags || id->driver_info; id++) {
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
-			if (id->id.bustype != dev->id.bustype)
+			if (id->bustype != dev->id.bustype)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
-			if (id->id.vendor != dev->id.vendor)
+			if (id->vendor != dev->id.vendor)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
-			if (id->id.product != dev->id.product)
+			if (id->product != dev->id.product)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
-			if (id->id.version != dev->id.version)
+			if (id->version != dev->id.version)
 				continue;
 
 		MATCH_BIT(evbit,  EV_MAX);
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index 2b2ec1057de..95c0de7964a 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -589,7 +589,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 	struct sw *sw;
 	struct input_dev *input_dev;
 	int i, j, k, l;
-	int err;
+	int err = 0;
 	unsigned char *buf = NULL;	/* [SW_LENGTH] */
 	unsigned char *idbuf = NULL;	/* [SW_LENGTH] */
 	unsigned char m = 1;
@@ -776,7 +776,10 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 			goto fail4;
 	}
 
-	return 0;
+ out:	kfree(buf);
+	kfree(idbuf);
+
+	return err;
 
  fail4:	input_free_device(sw->dev[i]);
  fail3:	while (--i >= 0)
@@ -784,9 +787,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
  fail2:	gameport_close(gameport);
  fail1:	gameport_set_drvdata(gameport, NULL);
 	kfree(sw);
-	kfree(buf);
-	kfree(idbuf);
-	return err;
+	goto out;
 }
 
 static void sw_disconnect(struct gameport *gameport)
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 96c6bf77248..1f0e720267d 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -245,9 +245,9 @@ static void corgikbd_hinge_timer(unsigned long data)
 		if (hinge_count >= HINGE_STABLE_COUNT) {
 			spin_lock_irqsave(&corgikbd_data->lock, flags);
 
-			input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
-			input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
-			input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
+			input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+			input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+			input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
 			input_sync(corgikbd_data->input);
 
 			spin_unlock_irqrestore(&corgikbd_data->lock, flags);
@@ -340,9 +340,9 @@ static int __init corgikbd_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
 		set_bit(corgikbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
 
 	input_register_device(corgikbd->input);
 
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 1dca3cf42a5..2e4abdc2636 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -350,11 +350,11 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
 	return 0;
  bail2:
 	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
  bail1:
 	input_free_device(kbd->dev);
  bail0:
 	kfree(kbd);
-	serio_set_drvdata(serio, NULL);
 	return -EIO;
 }
 
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index bc61cf8cfc6..c5d03fb77bc 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -53,8 +53,8 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
 	KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
 	0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
 	KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
-	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
-	SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
+	SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
+	SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
 	SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
 	KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */
 };
@@ -299,9 +299,9 @@ static void spitzkbd_hinge_timer(unsigned long data)
 	if (hinge_count >= HINGE_STABLE_COUNT) {
 		spin_lock_irqsave(&spitzkbd_data->lock, flags);
 
-		input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
 		input_sync(spitzkbd_data->input);
 
 		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
@@ -398,9 +398,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
 	for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
 		set_bit(spitzkbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
 
 	input_register_device(input_dev);
 
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 4b415d9b012..e4e5be111c9 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -273,6 +273,18 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] = {
 	{ KE_END,  0 }
 };
 
+static struct key_entry keymap_fujitsu_n3510[] = {
+	{ KE_KEY, 0x11, KEY_PROG1 },
+	{ KE_KEY, 0x12, KEY_PROG2 },
+	{ KE_KEY, 0x36, KEY_WWW },
+	{ KE_KEY, 0x31, KEY_MAIL },
+	{ KE_KEY, 0x71, KEY_STOPCD },
+	{ KE_KEY, 0x72, KEY_PLAYPAUSE },
+	{ KE_KEY, 0x74, KEY_REWIND },
+	{ KE_KEY, 0x78, KEY_FORWARD },
+	{ KE_END, 0 }
+};
+
 static struct key_entry keymap_wistron_ms2141[] = {
 	{ KE_KEY,  0x11, KEY_PROG1 },
 	{ KE_KEY,  0x12, KEY_PROG2 },
@@ -306,6 +318,16 @@ static struct key_entry keymap_acer_travelmate_240[] = {
 	{ KE_END, 0 }
 };
 
+static struct key_entry keymap_aopen_1559as[] = {
+	{ KE_KEY,  0x01, KEY_HELP },
+	{ KE_KEY,  0x06, KEY_PROG3 },
+	{ KE_KEY,  0x11, KEY_PROG1 },
+	{ KE_KEY,  0x12, KEY_PROG2 },
+	{ KE_WIFI, 0x30, 0 },
+	{ KE_KEY,  0x31, KEY_MAIL },
+	{ KE_KEY,  0x36, KEY_WWW },
+};
+
 /*
  * If your machine is not here (which is currently rather likely), please send
  * a list of buttons and their key codes (reported when loading this module
@@ -323,6 +345,24 @@ static struct dmi_system_id dmi_ids[] = {
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "Fujitsu-Siemens Amilo M7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M        "),
+		},
+		.driver_data = keymap_fs_amilo_pro_v2000
+	},
+	{
+		.callback = dmi_matched,
+		.ident = "Fujitsu N3510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N3510"),
+		},
+		.driver_data = keymap_fujitsu_n3510
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "Acer Aspire 1500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -339,6 +379,15 @@ static struct dmi_system_id dmi_ids[] = {
 		},
 		.driver_data = keymap_acer_travelmate_240
 	},
+        {
+		.callback = dmi_matched,
+		.ident = "AOpen 1559AS",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
+			DMI_MATCH(DMI_BOARD_NAME, "E2U"),
+		},
+		.driver_data = keymap_aopen_1559as
+	},
 	{ NULL, }
 };
 
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 2141501e9f2..a0e2e797c6d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -100,8 +100,8 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
 	}
 
 	if (priv->i->flags & ALPS_OLDPROTO) {
-		left = packet[2] & 0x08;
-		right = packet[2] & 0x10;
+		left = packet[2] & 0x10;
+		right = packet[2] & 0x08;
 		middle = 0;
 		x = packet[1] | ((packet[0] & 0x07) << 7);
 		y = packet[4] | ((packet[3] & 0x07) << 7);
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 5ccc3ef3b89..c14395ba798 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -22,12 +22,36 @@
 
 static struct dmi_system_id lifebook_dmi_table[] = {
        {
+               .ident = "LifeBook B",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
+               },
+       },
+       {
                .ident = "Lifebook B",
                .matches = {
                        DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
                },
        },
        {
+               .ident = "Lifebook B213x/B2150",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
+               },
+       },
+       {
+               .ident = "Zephyr",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
+               },
+       },
+       {
+               .ident = "CF-18",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+               },
+       },
+       {
                .ident = "Lifebook B142",
                .matches = {
                        DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 40333d61093..2f0d2884081 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -19,6 +19,7 @@
 #define PS2PP_KIND_WHEEL	1
 #define PS2PP_KIND_MX		2
 #define PS2PP_KIND_TP3		3
+#define PS2PP_KIND_TRACKMAN	4
 
 /* Logitech mouse features */
 #define PS2PP_WHEEL		0x01
@@ -223,6 +224,7 @@ static struct ps2pp_info *get_model_info(unsigned char model)
 		{ 73,	0,			PS2PP_SIDE_BTN },
 		{ 75,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 76,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
+		{ 79,	PS2PP_KIND_TRACKMAN,	PS2PP_WHEEL },		/* TrackMan with wheel */
 		{ 80,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL },
 		{ 81,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 83,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
@@ -298,6 +300,10 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_inf
 			psmouse->name = "TouchPad 3";
 			break;
 
+		case PS2PP_KIND_TRACKMAN:
+			psmouse->name = "TrackMan";
+			break;
+
 		default:
 			/*
 			 * Set name to "Mouse" only when using PS2++,
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 32d70ed8f41..136321a2cfd 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -302,8 +302,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
  * Check if this is a new device announcement (0xAA 0x00)
  */
 	if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
-		if (psmouse->pktcnt == 1)
+		if (psmouse->pktcnt == 1) {
+			psmouse->last = jiffies;
 			goto out;
+		}
 
 		if (psmouse->packet[1] == PSMOUSE_RET_ID) {
 			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index 9a922164425..cc21914fbc7 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -67,14 +67,14 @@ static inline int i8042_platform_init(void)
  * On some platforms touching the i8042 data register region can do really
  * bad things. Because of this the region is always reserved on such boxes.
  */
-#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC64)
+#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC_MERGE)
 	if (!request_region(I8042_DATA_REG, 16, "i8042"))
 		return -EBUSY;
 #endif
 
         i8042_reset = 1;
 
-#if defined(CONFIG_PPC64)
+#if defined(CONFIG_PPC_MERGE)
 	if (check_legacy_ioport(I8042_DATA_REG))
 		return -EBUSY;
 	if (!request_region(I8042_DATA_REG, 16, "i8042"))
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 46d1fec2cfd..161afddd0f4 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -2,6 +2,8 @@
  * ADS7846 based touchscreen and sensor driver
  *
  * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
  *
  * Using code from:
  *  - corgi_ts.c
@@ -34,17 +36,22 @@
 
 
 /*
- * This code has been lightly tested on an ads7846.
+ * This code has been heavily tested on a Nokia 770, and lightly
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock).
  * Support for ads7843 and ads7845 has only been stubbed in.
  *
- * Not yet done:  investigate the values reported.  Are x/y/pressure
- * event values sane enough for X11?  How accurate are the temperature
- * and voltage readings?  (System-specific calibration should support
- * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
+ * have to maintain our own SW IRQ disabled status. This should be
+ * removed as soon as the affected platform's IRQ handling is fixed.
  *
  * app note sbaa036 talks in more detail about accurate sampling...
  * that ought to help in situations like LCDs inducing noise (which
  * can also be helped by using synch signals) and more generally.
+ * This driver tries to utilize the measures described in the app
+ * note. The strength of filtering can be set in the board-* specific
+ * files.
  */
 
 #define	TS_POLL_PERIOD	msecs_to_jiffies(10)
@@ -61,6 +68,7 @@ struct ts_event {
 	__be16 x;
 	__be16 y;
 	__be16 z1, z2;
+	int    ignore;
 };
 
 struct ads7846 {
@@ -71,12 +79,23 @@ struct ads7846 {
 	u16			model;
 	u16			vref_delay_usecs;
 	u16			x_plate_ohms;
+	u16			pressure_max;
 
-	u8			read_x, read_y, read_z1, read_z2;
+	u8			read_x, read_y, read_z1, read_z2, pwrdown;
+	u16			dummy;		/* for the pwrdown read */
 	struct ts_event		tc;
 
-	struct spi_transfer	xfer[8];
-	struct spi_message	msg;
+	struct spi_transfer	xfer[10];
+	struct spi_message	msg[5];
+	struct spi_message	*last_msg;
+	int			msg_idx;
+	int			read_cnt;
+	int			read_rep;
+	int			last_read;
+
+	u16			debounce_max;
+	u16			debounce_tol;
+	u16			debounce_rep;
 
 	spinlock_t		lock;
 	struct timer_list	timer;		/* P: lock */
@@ -84,6 +103,9 @@ struct ads7846 {
 	unsigned		pending:1;	/* P: lock */
 // FIXME remove "irq_disabled"
 	unsigned		irq_disabled:1;	/* P: lock */
+	unsigned		disabled:1;
+
+	int			(*get_pendown_state)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -125,7 +147,9 @@ struct ads7846 {
 #define	READ_Y	(READ_12BIT_DFR(y)  | ADS_PD10_ADC_ON)
 #define	READ_Z1	(READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
 #define	READ_Z2	(READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
-#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_PDOWN)	/* LAST */
+
+#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_ADC_ON)
+#define	PWRDOWN	(READ_12BIT_DFR(y)  | ADS_PD10_PDOWN)	/* LAST */
 
 /* single-ended samples need to first power up reference voltage;
  * we leave both ADC and VREF powered
@@ -152,6 +176,15 @@ struct ser_req {
 	struct spi_transfer	xfer[6];
 };
 
+static void ads7846_enable(struct ads7846 *ts);
+static void ads7846_disable(struct ads7846 *ts);
+
+static int device_suspended(struct device *dev)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	return dev->power.power_state.event != PM_EVENT_ON || ts->disabled;
+}
+
 static int ads7846_read12_ser(struct device *dev, unsigned command)
 {
 	struct spi_device	*spi = to_spi_device(dev);
@@ -164,7 +197,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	if (!req)
 		return -ENOMEM;
 
-	INIT_LIST_HEAD(&req->msg.transfers);
+	spi_message_init(&req->msg);
 
 	/* activate reference, so it has time to settle; */
 	req->ref_on = REF_ON;
@@ -204,16 +237,21 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	for (i = 0; i < 6; i++)
 		spi_message_add_tail(&req->xfer[i], &req->msg);
 
+	ts->irq_disabled = 1;
 	disable_irq(spi->irq);
 	status = spi_sync(spi, &req->msg);
+	ts->irq_disabled = 0;
 	enable_irq(spi->irq);
 
 	if (req->msg.status)
 		status = req->msg.status;
+
+	/* on-wire is a must-ignore bit, a BE12 value, then padding */
 	sample = be16_to_cpu(req->sample);
-	sample = sample >> 4;
-	kfree(req);
+	sample = sample >> 3;
+	sample &= 0x0fff;
 
+	kfree(req);
 	return status ? status : sample;
 }
 
@@ -233,6 +271,52 @@ SHOW(temp1)
 SHOW(vaux)
 SHOW(vbatt)
 
+static int is_pen_down(struct device *dev)
+{
+	struct ads7846		*ts = dev_get_drvdata(dev);
+
+	return ts->pendown;
+}
+
+static ssize_t ads7846_pen_down_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", is_pen_down(dev));
+}
+
+static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
+
+static ssize_t ads7846_disable_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ads7846	*ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ads7846_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	char *endp;
+	int i;
+
+	i = simple_strtoul(buf, &endp, 10);
+	spin_lock_irq(&ts->lock);
+
+	if (i)
+		ads7846_disable(ts);
+	else
+		ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -252,19 +336,19 @@ static void ads7846_rx(void *ads)
 	u16			x, y, z1, z2;
 	unsigned long		flags;
 
-	/* adjust:  12 bit samples (left aligned), built from
-	 * two 8 bit values writen msb-first.
+	/* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
+	 * built from two 8 bit values written msb-first.
 	 */
-	x = be16_to_cpu(ts->tc.x) >> 4;
-	y = be16_to_cpu(ts->tc.y) >> 4;
-	z1 = be16_to_cpu(ts->tc.z1) >> 4;
-	z2 = be16_to_cpu(ts->tc.z2) >> 4;
+	x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
+	y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
+	z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
+	z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
 
 	/* range filtering */
 	if (x == MAX_12BIT)
 		x = 0;
 
-	if (x && z1 && ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
+	if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
 		/* compute touch pressure resistance using equation #2 */
 		Rt = z2;
 		Rt -= z1;
@@ -275,6 +359,14 @@ static void ads7846_rx(void *ads)
 	} else
 		Rt = 0;
 
+	/* Sample found inconsistent by debouncing or pressure is beyond
+	* the maximum. Don't report it to user space, repeat at least
+	* once more the measurement */
+	if (ts->tc.ignore || Rt > ts->pressure_max) {
+		mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+		return;
+	}
+
 	/* NOTE:  "pendown" is inferred from pressure; we don't rely on
 	 * being able to check nPENIRQ status, or "friendly" trigger modes
 	 * (both-edges is much better than just-falling or low-level).
@@ -296,11 +388,13 @@ static void ads7846_rx(void *ads)
 	if (Rt) {
 		input_report_abs(input_dev, ABS_X, x);
 		input_report_abs(input_dev, ABS_Y, y);
-		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		sync = 1;
 	}
-	if (sync)
+
+	if (sync) {
+		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		input_sync(input_dev);
+	}
 
 #ifdef	VERBOSE
 	if (Rt || ts->pendown)
@@ -308,80 +402,137 @@ static void ads7846_rx(void *ads)
 			x, y, Rt, Rt ? "" : " UP");
 #endif
 
-	/* don't retrigger while we're suspended */
 	spin_lock_irqsave(&ts->lock, flags);
 
 	ts->pendown = (Rt != 0);
-	ts->pending = 0;
+	mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
 
-	if (ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
-		if (ts->pendown)
-			mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
-		else if (ts->irq_disabled) {
-			ts->irq_disabled = 0;
-			enable_irq(ts->spi->irq);
+	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void ads7846_debounce(void *ads)
+{
+	struct ads7846		*ts = ads;
+	struct spi_message	*m;
+	struct spi_transfer	*t;
+	int			val;
+	int			status;
+
+	m = &ts->msg[ts->msg_idx];
+	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+	val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
+	if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
+		/* Repeat it, if this was the first read or the read
+		 * wasn't consistent enough. */
+		if (ts->read_cnt < ts->debounce_max) {
+			ts->last_read = val;
+			ts->read_cnt++;
+		} else {
+			/* Maximum number of debouncing reached and still
+			 * not enough number of consistent readings. Abort
+			 * the whole sample, repeat it in the next sampling
+			 * period.
+			 */
+			ts->tc.ignore = 1;
+			ts->read_cnt = 0;
+			/* Last message will contain ads7846_rx() as the
+			 * completion function.
+			 */
+			m = ts->last_msg;
 		}
+		/* Start over collecting consistent readings. */
+		ts->read_rep = 0;
+	} else {
+		if (++ts->read_rep > ts->debounce_rep) {
+			/* Got a good reading for this coordinate,
+			 * go for the next one. */
+			ts->tc.ignore = 0;
+			ts->msg_idx++;
+			ts->read_cnt = 0;
+			ts->read_rep = 0;
+			m++;
+		} else
+			/* Read more values that are consistent. */
+			ts->read_cnt++;
 	}
-
-	spin_unlock_irqrestore(&ts->lock, flags);
+	status = spi_async(ts->spi, m);
+	if (status)
+		dev_err(&ts->spi->dev, "spi_async --> %d\n",
+				status);
 }
 
 static void ads7846_timer(unsigned long handle)
 {
 	struct ads7846	*ts = (void *)handle;
 	int		status = 0;
-	unsigned long	flags;
+
+	spin_lock_irq(&ts->lock);
+
+	if (unlikely(ts->msg_idx && !ts->pendown)) {
+		/* measurement cycle ended */
+		if (!device_suspended(&ts->spi->dev)) {
+			ts->irq_disabled = 0;
+			enable_irq(ts->spi->irq);
+		}
+		ts->pending = 0;
+		ts->msg_idx = 0;
+	} else {
+		/* pen is still down, continue with the measurement */
+		ts->msg_idx = 0;
+		status = spi_async(ts->spi, &ts->msg[0]);
+		if (status)
+			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
+	}
+
+	spin_unlock_irq(&ts->lock);
+}
+
+static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
+{
+	struct ads7846 *ts = handle;
+	unsigned long flags;
 
 	spin_lock_irqsave(&ts->lock, flags);
-	if (!ts->pending) {
-		ts->pending = 1;
+	if (likely(ts->get_pendown_state())) {
 		if (!ts->irq_disabled) {
+			/* The ARM do_simple_IRQ() dispatcher doesn't act
+			 * like the other dispatchers:  it will report IRQs
+			 * even after they've been disabled.  We work around
+			 * that here.  (The "generic irq" framework may help...)
+			 */
 			ts->irq_disabled = 1;
 			disable_irq(ts->spi->irq);
+			ts->pending = 1;
+			mod_timer(&ts->timer, jiffies);
 		}
-		status = spi_async(ts->spi, &ts->msg);
-		if (status)
-			dev_err(&ts->spi->dev, "spi_async --> %d\n",
-					status);
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);
-}
 
-static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
-{
-	ads7846_timer((unsigned long) handle);
 	return IRQ_HANDLED;
 }
 
 /*--------------------------------------------------------------------------*/
 
-static int
-ads7846_suspend(struct spi_device *spi, pm_message_t message)
+/* Must be called with ts->lock held */
+static void ads7846_disable(struct ads7846 *ts)
 {
-	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
-	unsigned long	flags;
+	if (ts->disabled)
+		return;
 
-	spin_lock_irqsave(&ts->lock, flags);
-
-	spi->dev.power.power_state = message;
+	ts->disabled = 1;
 
 	/* are we waiting for IRQ, or polling? */
-	if (!ts->pendown) {
-		if (!ts->irq_disabled) {
-			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
-		}
+	if (!ts->pending) {
+		ts->irq_disabled = 1;
+		disable_irq(ts->spi->irq);
 	} else {
-		/* polling; force a final SPI completion;
-		 * that will clean things up neatly
+		/* the timer will run at least once more, and
+		 * leave everything in a clean state, IRQ disabled
 		 */
-		if (!ts->pending)
-			mod_timer(&ts->timer, jiffies);
-
-		while (ts->pendown || ts->pending) {
-			spin_unlock_irqrestore(&ts->lock, flags);
-			udelay(10);
-			spin_lock_irqsave(&ts->lock, flags);
+		while (ts->pending) {
+			spin_unlock_irq(&ts->lock);
+			msleep(1);
+			spin_lock_irq(&ts->lock);
 		}
 	}
 
@@ -389,17 +540,45 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
 	 * leave it that way after every request
 	 */
 
-	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_enable(struct ads7846 *ts)
+{
+	if (!ts->disabled)
+		return;
+
+	ts->disabled = 0;
+	ts->irq_disabled = 0;
+	enable_irq(ts->spi->irq);
+}
+
+static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+
+	spin_lock_irq(&ts->lock);
+
+	spi->dev.power.power_state = message;
+	ads7846_disable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
+
 }
 
 static int ads7846_resume(struct spi_device *spi)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-	ts->irq_disabled = 0;
-	enable_irq(ts->spi->irq);
+	spin_lock_irq(&ts->lock);
+
 	spi->dev.power.power_state = PMSG_ON;
+	ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
 }
 
@@ -408,6 +587,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	struct ads7846			*ts;
 	struct input_dev		*input_dev;
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
+	struct spi_message		*m;
 	struct spi_transfer		*x;
 	int				err;
 
@@ -428,11 +608,20 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	/* We'd set the wordsize to 12 bits ... except that some controllers
-	 * will then treat the 8 bit command words as 12 bits (and drop the
-	 * four MSBs of the 12 bit result).  Result: inputs must be shifted
-	 * to discard the four garbage LSBs.
+	/* REVISIT when the irq can be triggered active-low, or if for some
+	 * reason the touchscreen isn't hooked up, we don't need to access
+	 * the pendown state.
 	 */
+	if (pdata->get_pendown_state == NULL) {
+		dev_dbg(&spi->dev, "no get_pendown_state function?\n");
+		return -EINVAL;
+	}
+
+	/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
+	 * that even if the hardware can do that, the SPI controller driver
+	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
+	 */
+	spi->bits_per_word = 8;
 
 	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -451,9 +640,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->timer.data = (unsigned long) ts;
 	ts->timer.function = ads7846_timer;
 
+	spin_lock_init(&ts->lock);
+
 	ts->model = pdata->model ? : 7846;
 	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+	if (pdata->debounce_max) {
+		ts->debounce_max = pdata->debounce_max;
+		ts->debounce_tol = pdata->debounce_tol;
+		ts->debounce_rep = pdata->debounce_rep;
+		if (ts->debounce_rep > ts->debounce_max + 1)
+			ts->debounce_rep = ts->debounce_max - 1;
+	} else
+		ts->debounce_tol = ~0;
+	ts->get_pendown_state = pdata->get_pendown_state;
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
 
@@ -477,64 +678,104 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
-	INIT_LIST_HEAD(&ts->msg.transfers);
+	m = &ts->msg[0];
 	x = ts->xfer;
 
+	spi_message_init(m);
+
 	/* y- still on; turn on only y+ (and ADC) */
 	ts->read_y = READ_Y;
 	x->tx_buf = &ts->read_y;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
 	x->rx_buf = &ts->tc.y;
 	x->len = 2;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
+
+	m++;
+	spi_message_init(m);
+
+	/* turn y- off, x+ on, then leave in lowpower */
+	x++;
+	ts->read_x = READ_X;
+	x->tx_buf = &ts->read_x;
+	x->len = 1;
+	spi_message_add_tail(x, m);
+
+	x++;
+	x->rx_buf = &ts->tc.x;
+	x->len = 2;
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
 
 	/* turn y+ off, x- on; we'll use formula #2 */
 	if (ts->model == 7846) {
+		m++;
+		spi_message_init(m);
+
 		x++;
 		ts->read_z1 = READ_Z1;
 		x->tx_buf = &ts->read_z1;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z1;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
+
+		m++;
+		spi_message_init(m);
 
 		x++;
 		ts->read_z2 = READ_Z2;
 		x->tx_buf = &ts->read_z2;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z2;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
 	}
 
-	/* turn y- off, x+ on, then leave in lowpower */
+	/* power down */
+	m++;
+	spi_message_init(m);
+
 	x++;
-	ts->read_x = READ_X;
-	x->tx_buf = &ts->read_x;
+	ts->pwrdown = PWRDOWN;
+	x->tx_buf = &ts->pwrdown;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.x;
+	x->rx_buf = &ts->dummy;
 	x->len = 2;
 	CS_CHANGE(*x);
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_rx;
+	m->context = ts;
 
-	ts->msg.complete = ads7846_rx;
-	ts->msg.context = ts;
+	ts->last_msg = m;
 
 	if (request_irq(spi->irq, ads7846_irq,
 			SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
-			spi->dev.bus_id, ts)) {
+			spi->dev.driver->name, ts)) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		err = -EBUSY;
 		goto err_free_mem;
@@ -559,13 +800,27 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		device_create_file(&spi->dev, &dev_attr_vbatt);
 	device_create_file(&spi->dev, &dev_attr_vaux);
 
+	device_create_file(&spi->dev, &dev_attr_pen_down);
+
+	device_create_file(&spi->dev, &dev_attr_disable);
+
 	err = input_register_device(input_dev);
 	if (err)
-		goto err_free_irq;
+		goto err_remove_attr;
 
 	return 0;
 
- err_free_irq:
+ err_remove_attr:
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
+	if (ts->model == 7846) {
+		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
+	}
+	if (ts->model != 7845)
+		device_remove_file(&spi->dev, &dev_attr_vbatt);
+	device_remove_file(&spi->dev, &dev_attr_vaux);
+
 	free_irq(spi->irq, ts);
  err_free_mem:
 	input_free_device(input_dev);
@@ -577,20 +832,24 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	input_unregister_device(ts->input);
+
 	ads7846_suspend(spi, PMSG_SUSPEND);
-	free_irq(ts->spi->irq, ts);
-	if (ts->irq_disabled)
-		enable_irq(ts->spi->irq);
 
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
 	if (ts->model == 7846) {
-		device_remove_file(&spi->dev, &dev_attr_temp0);
 		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
 	}
 	if (ts->model != 7845)
 		device_remove_file(&spi->dev, &dev_attr_vbatt);
 	device_remove_file(&spi->dev, &dev_attr_vaux);
 
-	input_unregister_device(ts->input);
+	free_irq(ts->spi->irq, ts);
+	/* suspend left the IRQ disabled */
+	enable_irq(ts->spi->irq);
+
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 1042987856f..5013703db0e 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/irq.h>
+//#include <asm/irq.h>
 
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/hardware.h>
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 9b493f0becc..173c899a1fb 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1499,7 +1499,6 @@ static int __init capi_init(void)
 		printk(KERN_ERR "capi20: unable to get major %d\n", capi_major);
 		return major_ret;
 	}
-	capi_major = major_ret;
 	capi_class = class_create(THIS_MODULE, "capi");
 	if (IS_ERR(capi_class)) {
 		unregister_chrdev(capi_major, "capi20");
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index f86ed6af3aa..eb41aba3dde 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -5,8 +5,6 @@
  *                       Tilman Schmidt <tilman@imap.cc>,
  *                       Stefan Eilers.
  *
- * Based on usb-gigaset.c.
- *
  * =====================================================================
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License as
@@ -46,19 +44,20 @@ MODULE_PARM_DESC(cidmode, "Call-ID mode");
 #define GIGASET_DEVFSNAME  "gig/bas/"
 #define GIGASET_DEVNAME    "ttyGB"
 
-#define IF_WRITEBUF 256 //FIXME
+/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
+#define IF_WRITEBUF 264
 
 /* Values for the Gigaset 307x */
 #define USB_GIGA_VENDOR_ID      0x0681
-#define USB_GIGA_PRODUCT_ID     0x0001
-#define USB_4175_PRODUCT_ID     0x0002
+#define USB_3070_PRODUCT_ID     0x0001
+#define USB_3075_PRODUCT_ID     0x0002
 #define USB_SX303_PRODUCT_ID    0x0021
 #define USB_SX353_PRODUCT_ID    0x0022
 
 /* table of devices that work with this driver */
 static struct usb_device_id gigaset_table [] = {
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_GIGA_PRODUCT_ID) },
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_4175_PRODUCT_ID) },
+	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
+	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) },
 	{ } /* Terminating entry */
@@ -77,6 +76,10 @@ static int gigaset_probe(struct usb_interface *interface,
 /* Function will be called if the device is unplugged */
 static void gigaset_disconnect(struct usb_interface *interface);
 
+static void read_ctrl_callback(struct urb *, struct pt_regs *);
+static void stopurbs(struct bas_bc_state *);
+static int atwrite_submit(struct cardstate *, unsigned char *, int);
+static int start_cbsend(struct cardstate *);
 
 /*==============================================================================*/
 
@@ -111,12 +114,14 @@ struct bas_cardstate {
 };
 
 /* status of direct USB connection to 307x base (bits in basstate) */
-#define BS_ATOPEN	0x001
-#define BS_B1OPEN	0x002
-#define BS_B2OPEN	0x004
-#define BS_ATREADY	0x008
-#define BS_INIT		0x010
-#define BS_ATTIMER	0x020
+#define BS_ATOPEN	0x001	/* AT channel open */
+#define BS_B1OPEN	0x002	/* B channel 1 open */
+#define BS_B2OPEN	0x004	/* B channel 2 open */
+#define BS_ATREADY	0x008	/* base ready for AT command */
+#define BS_INIT		0x010	/* base has signalled INIT_OK */
+#define BS_ATTIMER	0x020	/* waiting for HD_READY_SEND_ATDATA */
+#define BS_ATRDPEND	0x040	/* urb_cmd_in in use */
+#define BS_ATWRPEND	0x080	/* urb_cmd_out in use */
 
 
 static struct gigaset_driver *driver = NULL;
@@ -130,6 +135,47 @@ static struct usb_driver gigaset_usb_driver = {
 	.id_table =     gigaset_table,
 };
 
+/* get message text for usb_submit_urb return code
+ */
+static char *get_usb_rcmsg(int rc)
+{
+	static char unkmsg[28];
+
+	switch (rc) {
+	case 0:
+		return "success";
+	case -ENOMEM:
+		return "out of memory";
+	case -ENODEV:
+		return "device not present";
+	case -ENOENT:
+		return "endpoint not present";
+	case -ENXIO:
+		return "URB type not supported";
+	case -EINVAL:
+		return "invalid argument";
+	case -EAGAIN:
+		return "start frame too early or too much scheduled";
+	case -EFBIG:
+		return "too many isochronous frames requested";
+	case -EPIPE:
+		return "endpoint stalled";
+	case -EMSGSIZE:
+		return "invalid packet size";
+	case -ENOSPC:
+		return "would overcommit USB bandwidth";
+	case -ESHUTDOWN:
+		return "device shut down";
+	case -EPERM:
+		return "reject flag set";
+	case -EHOSTUNREACH:
+		return "device suspended";
+	default:
+		snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", rc);
+		return unkmsg;
+	}
+}
+
 /* get message text for USB status code
  */
 static char *get_usb_statmsg(int status)
@@ -140,43 +186,37 @@ static char *get_usb_statmsg(int status)
 	case 0:
 		return "success";
 	case -ENOENT:
-		return "canceled";
-	case -ECONNRESET:
-		return "canceled (async)";
+		return "unlinked (sync)";
 	case -EINPROGRESS:
 		return "pending";
 	case -EPROTO:
-		return "bit stuffing or unknown USB error";
+		return "bit stuffing error, timeout, or unknown USB error";
 	case -EILSEQ:
-		return "Illegal byte sequence (CRC mismatch)";
-	case -EPIPE:
-		return "babble detect or endpoint stalled";
-	case -ENOSR:
-		return "buffer error";
+		return "CRC mismatch, timeout, or unknown USB error";
 	case -ETIMEDOUT:
 		return "timed out";
-	case -ENODEV:
-		return "device not present";
+	case -EPIPE:
+		return "endpoint stalled";
+	case -ECOMM:
+		return "IN buffer overrun";
+	case -ENOSR:
+		return "OUT buffer underrun";
+	case -EOVERFLOW:
+		return "too much data";
 	case -EREMOTEIO:
 		return "short packet detected";
+	case -ENODEV:
+		return "device removed";
 	case -EXDEV:
 		return "partial isochronous transfer";
 	case -EINVAL:
 		return "invalid argument";
-	case -ENXIO:
-		return "URB already queued";
-	case -EAGAIN:
-		return "isochronous start frame too early or too much scheduled";
-	case -EFBIG:
-		return "too many isochronous frames requested";
-	case -EMSGSIZE:
-		return "endpoint message size zero";
+	case -ECONNRESET:
+		return "unlinked (async)";
 	case -ESHUTDOWN:
-		return "endpoint shutdown";
-	case -EBUSY:
-		return "another request pending";
+		return "device shut down";
 	default:
-		snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", status);
+		snprintf(unkmsg, sizeof(unkmsg), "unknown status %d", status);
 		return unkmsg;
 	}
 }
@@ -277,18 +317,17 @@ static inline void error_hangup(struct bc_state *bcs)
 	gig_dbg(DEBUG_ANY, "%s: scheduling HUP for channel %d",
 		__func__, bcs->channel);
 
-	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
-		//FIXME what should we do?
-		return;
-	}
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL))
+		dev_err(cs->dev, "event queue full\n");
 
 	gigaset_schedule_event(cs);
 }
 
 /* error_reset
  * reset Gigaset device because of an unrecoverable error
- * This function may be called from any context and takes care of scheduling
- * the necessary actions for execution outside of interrupt context.
+ * This function may be called from any context, and should take care of
+ * scheduling the necessary actions for execution outside of interrupt context.
+ * Right now, it just generates a kernel message calling for help.
  * argument:
  *	controller state structure
  */
@@ -364,36 +403,38 @@ static void cmd_in_timeout(unsigned long data)
 {
 	struct cardstate *cs = (struct cardstate *) data;
 	struct bas_cardstate *ucs = cs->hw.bas;
-	unsigned long flags;
 
-	spin_lock_irqsave(&cs->lock, flags);
-	if (unlikely(!cs->connected)) {
-		gig_dbg(DEBUG_USBREQ, "%s: disconnected", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return;
-	}
 	if (!ucs->rcvbuf_size) {
 		gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
 		return;
 	}
-	spin_unlock_irqrestore(&cs->lock, flags);
 
 	dev_err(cs->dev, "timeout reading AT response\n");
 	error_reset(cs);	//FIXME retry?
 }
 
+/* set/clear bits in base connection state, return previous state
+ */
+inline static int update_basstate(struct bas_cardstate *ucs,
+				  int set, int clear)
+{
+	unsigned long flags;
+	int state;
 
-static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs);
+	spin_lock_irqsave(&ucs->lock, flags);
+	state = atomic_read(&ucs->basstate);
+	atomic_set(&ucs->basstate, (state & ~clear) | set);
+	spin_unlock_irqrestore(&ucs->lock, flags);
+	return state;
+}
 
 /* atread_submit
- * submit an HD_READ_ATMESSAGE command URB
+ * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout
  * parameters:
  *	cs	controller state structure
  *	timeout	timeout in 1/10 sec., 0: none
  * return value:
  *	0 on success
- *	-EINVAL if a NULL pointer is encountered somewhere
  *	-EBUSY if another request is pending
  *	any URB submission error code
  */
@@ -405,7 +446,7 @@ static int atread_submit(struct cardstate *cs, int timeout)
 	gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)",
 		ucs->rcvbuf_size);
 
-	if (ucs->urb_cmd_in->status == -EINPROGRESS) {
+	if (update_basstate(ucs, BS_ATRDPEND, 0) & BS_ATRDPEND) {
 		dev_err(cs->dev,
 			"could not submit HD_READ_ATMESSAGE: URB busy\n");
 		return -EBUSY;
@@ -423,6 +464,7 @@ static int atread_submit(struct cardstate *cs, int timeout)
 			     read_ctrl_callback, cs->inbuf);
 
 	if ((ret = usb_submit_urb(ucs->urb_cmd_in, SLAB_ATOMIC)) != 0) {
+		update_basstate(ucs, 0, BS_ATRDPEND);
 		dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
 			get_usb_statmsg(ret));
 		return ret;
@@ -438,26 +480,6 @@ static int atread_submit(struct cardstate *cs, int timeout)
 	return 0;
 }
 
-static void stopurbs(struct bas_bc_state *);
-static int start_cbsend(struct cardstate *);
-
-/* set/clear bits in base connection state
- */
-inline static void update_basstate(struct bas_cardstate *ucs,
-				   int set, int clear)
-{
-	unsigned long flags;
-	int state;
-
-	spin_lock_irqsave(&ucs->lock, flags);
-	state = atomic_read(&ucs->basstate);
-	state &= ~clear;
-	state |= set;
-	atomic_set(&ucs->basstate, state);
-	spin_unlock_irqrestore(&ucs->lock, flags);
-}
-
-
 /* read_int_callback
  * USB completion handler for interrupt pipe input
  * called by the USB subsystem in interrupt context
@@ -471,20 +493,25 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 	struct bas_cardstate *ucs = cs->hw.bas;
 	struct bc_state *bcs;
 	unsigned long flags;
-	int status;
+	int rc;
 	unsigned l;
 	int channel;
 
 	switch (urb->status) {
 	case 0:			/* success */
 		break;
-	case -ENOENT:			/* canceled */
-	case -ECONNRESET:		/* canceled (async) */
+	case -ENOENT:			/* cancelled */
+	case -ECONNRESET:		/* cancelled (async) */
 	case -EINPROGRESS:		/* pending */
 		/* ignore silently */
 		gig_dbg(DEBUG_USBREQ, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
 		return;
+	case -ENODEV:			/* device removed */
+	case -ESHUTDOWN:		/* device shut down */
+		//FIXME use this as disconnect indicator?
+		gig_dbg(DEBUG_USBREQ, "%s: device disconnected", __func__);
+		return;
 	default:		/* severe trouble */
 		dev_warn(cs->dev, "interrupt read: %s\n",
 			 get_usb_statmsg(urb->status));
@@ -492,6 +519,13 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 		goto resubmit;
 	}
 
+	/* drop incomplete packets even if the missing bytes wouldn't matter */
+	if (unlikely(urb->actual_length < 3)) {
+		dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
+			 urb->actual_length);
+		goto resubmit;
+	}
+
 	l = (unsigned) ucs->int_in_buf[1] +
 	    (((unsigned) ucs->int_in_buf[2]) << 8);
 
@@ -558,25 +592,28 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 		}
 		spin_lock_irqsave(&cs->lock, flags);
 		if (ucs->rcvbuf_size) {
-			spin_unlock_irqrestore(&cs->lock, flags);
+			/* throw away previous buffer - we have no queue */
 			dev_err(cs->dev,
-				"receive AT data overrun, %d bytes lost\n", l);
-			error_reset(cs);	//FIXME reschedule
-			break;
+				"receive AT data overrun, %d bytes lost\n",
+				ucs->rcvbuf_size);
+			kfree(ucs->rcvbuf);
+			ucs->rcvbuf_size = 0;
 		}
 		if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) {
 			spin_unlock_irqrestore(&cs->lock, flags);
-			dev_err(cs->dev, "out of memory, %d bytes lost\n", l);
-			error_reset(cs);	//FIXME reschedule
+			dev_err(cs->dev, "out of memory receiving AT data\n");
+			error_reset(cs);
 			break;
 		}
 		ucs->rcvbuf_size = l;
 		ucs->retry_cmd_in = 0;
-		if ((status = atread_submit(cs, BAS_TIMEOUT)) < 0) {
+		if ((rc = atread_submit(cs, BAS_TIMEOUT)) < 0) {
 			kfree(ucs->rcvbuf);
 			ucs->rcvbuf = NULL;
 			ucs->rcvbuf_size = 0;
-			error_reset(cs);	//FIXME reschedule
+			if (rc != -ENODEV)
+				//FIXME corrective action?
+				error_reset(cs);
 		}
 		spin_unlock_irqrestore(&cs->lock, flags);
 		break;
@@ -598,12 +635,10 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 	check_pending(ucs);
 
 resubmit:
-	spin_lock_irqsave(&cs->lock, flags);
-	status = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
-	spin_unlock_irqrestore(&cs->lock, flags);
-	if (unlikely(status)) {
+	rc = usb_submit_urb(urb, SLAB_ATOMIC);
+	if (unlikely(rc != 0 && rc != -ENODEV)) {
 		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
-			get_usb_statmsg(status));
+			get_usb_rcmsg(rc));
 		error_reset(cs);
 	}
 }
@@ -622,18 +657,12 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 	struct bas_cardstate *ucs = cs->hw.bas;
 	int have_data = 0;
 	unsigned numbytes;
-	unsigned long flags;
+	int rc;
 
-	spin_lock_irqsave(&cs->lock, flags);
-	if (unlikely(!cs->connected)) {
-		warn("%s: disconnected", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return;
-	}
+	update_basstate(ucs, 0, BS_ATRDPEND);
 
 	if (!ucs->rcvbuf_size) {
 		dev_warn(cs->dev, "%s: no receive in progress\n", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
 		return;
 	}
 
@@ -666,9 +695,11 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 		}
 		break;
 
-	case -ENOENT:			/* canceled */
-	case -ECONNRESET:		/* canceled (async) */
+	case -ENOENT:			/* cancelled */
+	case -ECONNRESET:		/* cancelled (async) */
 	case -EINPROGRESS:		/* pending */
+	case -ENODEV:			/* device removed */
+	case -ESHUTDOWN:		/* device shut down */
 		/* no action necessary */
 		gig_dbg(DEBUG_USBREQ, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
@@ -681,11 +712,11 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 		if (ucs->retry_cmd_in++ < BAS_RETRY) {
 			dev_notice(cs->dev, "control read: retry %d\n",
 				   ucs->retry_cmd_in);
-			if (atread_submit(cs, BAS_TIMEOUT) >= 0) {
-				/* resubmitted - bypass regular exit block */
-				spin_unlock_irqrestore(&cs->lock, flags);
+			rc = atread_submit(cs, BAS_TIMEOUT);
+			if (rc >= 0 || rc == -ENODEV)
+				/* resubmitted or disconnected */
+				/* - bypass regular exit block */
 				return;
-			}
 		} else {
 			dev_err(cs->dev,
 				"control read: giving up after %d tries\n",
@@ -697,7 +728,6 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 	kfree(ucs->rcvbuf);
 	ucs->rcvbuf = NULL;
 	ucs->rcvbuf_size = 0;
-	spin_unlock_irqrestore(&cs->lock, flags);
 	if (have_data) {
 		gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
 		gigaset_schedule_event(cs);
@@ -719,8 +749,11 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs)
 	int i, rc;
 
 	/* status codes not worth bothering the tasklet with */
-	if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
-		     urb->status == -EINPROGRESS)) {
+	if (unlikely(urb->status == -ENOENT ||
+		     urb->status == -ECONNRESET ||
+		     urb->status == -EINPROGRESS ||
+		     urb->status == -ENODEV ||
+		     urb->status == -ESHUTDOWN)) {
 		gig_dbg(DEBUG_ISO, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
 		return;
@@ -740,9 +773,9 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs)
 		for (i = 0; i < BAS_NUMFRAMES; i++) {
 			ubc->isoinlost += urb->iso_frame_desc[i].actual_length;
 			if (unlikely(urb->iso_frame_desc[i].status != 0 &&
-				     urb->iso_frame_desc[i].status != -EINPROGRESS)) {
+				     urb->iso_frame_desc[i].status !=
+								-EINPROGRESS))
 				ubc->loststatus = urb->iso_frame_desc[i].status;
-			}
 			urb->iso_frame_desc[i].status = 0;
 			urb->iso_frame_desc[i].actual_length = 0;
 		}
@@ -754,10 +787,10 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs)
 			gig_dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit",
 				__func__);
 			rc = usb_submit_urb(urb, SLAB_ATOMIC);
-			if (unlikely(rc != 0)) {
+			if (unlikely(rc != 0 && rc != -ENODEV)) {
 				dev_err(bcs->cs->dev,
 					"could not resubmit isochronous read "
-					"URB: %s\n", get_usb_statmsg(rc));
+					"URB: %s\n", get_usb_rcmsg(rc));
 				dump_urb(DEBUG_ISO, "isoc read", urb);
 				error_hangup(bcs);
 			}
@@ -780,8 +813,11 @@ static void write_iso_callback(struct urb *urb, struct pt_regs *regs)
 	unsigned long flags;
 
 	/* status codes not worth bothering the tasklet with */
-	if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
-		     urb->status == -EINPROGRESS)) {
+	if (unlikely(urb->status == -ENOENT ||
+		     urb->status == -ECONNRESET ||
+		     urb->status == -EINPROGRESS ||
+		     urb->status == -ENODEV ||
+		     urb->status == -ESHUTDOWN)) {
 		gig_dbg(DEBUG_ISO, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
 		return;
@@ -822,7 +858,6 @@ static int starturbs(struct bc_state *bcs)
 	for (k = 0; k < BAS_INURBS; k++) {
 		urb = ubc->isoinurbs[k];
 		if (!urb) {
-			dev_err(bcs->cs->dev, "isoinurbs[%d]==NULL\n", k);
 			rc = -EFAULT;
 			goto error;
 		}
@@ -844,12 +879,8 @@ static int starturbs(struct bc_state *bcs)
 		}
 
 		dump_urb(DEBUG_ISO, "Initial isoc read", urb);
-		if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) {
-			dev_err(bcs->cs->dev,
-			       "could not submit isochronous read URB %d: %s\n",
-				k, get_usb_statmsg(rc));
+		if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0)
 			goto error;
-		}
 	}
 
 	/* initialize L2 transmission */
@@ -859,7 +890,6 @@ static int starturbs(struct bc_state *bcs)
 	for (k = 0; k < BAS_OUTURBS; ++k) {
 		urb = ubc->isoouturbs[k].urb;
 		if (!urb) {
-			dev_err(bcs->cs->dev, "isoouturbs[%d].urb==NULL\n", k);
 			rc = -EFAULT;
 			goto error;
 		}
@@ -885,12 +915,8 @@ static int starturbs(struct bc_state *bcs)
 	for (k = 0; k < 2; ++k) {
 		dump_urb(DEBUG_ISO, "Initial isoc write", urb);
 		rc = usb_submit_urb(ubc->isoouturbs[k].urb, SLAB_ATOMIC);
-		if (rc != 0) {
-			dev_err(bcs->cs->dev,
-			      "could not submit isochronous write URB %d: %s\n",
-				k, get_usb_statmsg(rc));
+		if (rc != 0)
 			goto error;
-		}
 	}
 	dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb);
 	ubc->isooutfree = &ubc->isoouturbs[2];
@@ -916,15 +942,15 @@ static void stopurbs(struct bas_bc_state *ubc)
 	for (k = 0; k < BAS_INURBS; ++k) {
 		rc = usb_unlink_urb(ubc->isoinurbs[k]);
 		gig_dbg(DEBUG_ISO,
-			"%s: isoc input URB %d unlinked, result = %d",
-			__func__, k, rc);
+			"%s: isoc input URB %d unlinked, result = %s",
+			__func__, k, get_usb_rcmsg(rc));
 	}
 
 	for (k = 0; k < BAS_OUTURBS; ++k) {
 		rc = usb_unlink_urb(ubc->isoouturbs[k].urb);
 		gig_dbg(DEBUG_ISO,
-			"%s: isoc output URB %d unlinked, result = %d",
-			__func__, k, rc);
+			"%s: isoc output URB %d unlinked, result = %s",
+			__func__, k, get_usb_rcmsg(rc));
 	}
 }
 
@@ -934,7 +960,7 @@ static void stopurbs(struct bas_bc_state *ubc)
 /* submit_iso_write_urb
  * fill and submit the next isochronous write URB
  * parameters:
- *	bcs	B channel state structure
+ *	ucx	context structure containing URB
  * return value:
  *	number of frames submitted in URB
  *	0 if URB not submitted because no data available (isooutbuf busy)
@@ -946,7 +972,6 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
 	struct bas_bc_state *ubc = ucx->bcs->hw.bas;
 	struct usb_iso_packet_descriptor *ifd;
 	int corrbytes, nframe, rc;
-	unsigned long flags;
 
 	/* urb->dev is clobbered by USB subsystem */
 	urb->dev = ucx->bcs->cs->hw.bas->udev;
@@ -992,20 +1017,22 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
 		ifd->status = 0;
 		ifd->actual_length = 0;
 	}
-	if ((urb->number_of_packets = nframe) > 0) {
-		spin_lock_irqsave(&ucx->bcs->cs->lock, flags);
-		rc = ucx->bcs->cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
-		spin_unlock_irqrestore(&ucx->bcs->cs->lock, flags);
+	if (unlikely(nframe == 0))
+		return 0;	/* no data to send */
+	urb->number_of_packets = nframe;
 
-		if (rc) {
+	rc = usb_submit_urb(urb, SLAB_ATOMIC);
+	if (unlikely(rc)) {
+		if (rc == -ENODEV)
+			/* device removed - give up silently */
+			gig_dbg(DEBUG_ISO, "%s: disconnected", __func__);
+		else
 			dev_err(ucx->bcs->cs->dev,
 				"could not submit isochronous write URB: %s\n",
-				get_usb_statmsg(rc));
-			dump_urb(DEBUG_ISO, "isoc write", urb);
-			return rc;
-		}
-		++ubc->numsub;
+				get_usb_rcmsg(rc));
+		return rc;
 	}
+	++ubc->numsub;
 	return nframe;
 }
 
@@ -1028,6 +1055,7 @@ static void write_iso_tasklet(unsigned long data)
 	int i;
 	struct sk_buff *skb;
 	int len;
+	int rc;
 
 	/* loop while completed URBs arrive in time */
 	for (;;) {
@@ -1057,7 +1085,8 @@ static void write_iso_tasklet(unsigned long data)
 		ubc->isooutfree = NULL;
 		spin_unlock_irqrestore(&ubc->isooutlock, flags);
 		if (next) {
-			if (submit_iso_write_urb(next) <= 0) {
+			rc = submit_iso_write_urb(next);
+			if (unlikely(rc <= 0 && rc != -ENODEV)) {
 				/* could not submit URB, put it back */
 				spin_lock_irqsave(&ubc->isooutlock, flags);
 				if (ubc->isooutfree == NULL) {
@@ -1077,17 +1106,18 @@ static void write_iso_tasklet(unsigned long data)
 		/* process completed URB */
 		urb = done->urb;
 		switch (urb->status) {
+		case -EXDEV:			/* partial completion */
+			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
+				__func__);
+			/* fall through - what's the difference anyway? */
 		case 0:				/* normal completion */
-			break;
-		case -EXDEV:			/* inspect individual frames */
-			/* assumptions (for lack of documentation):
-			 * - actual_length bytes of the frame in error are
+			/* inspect individual frames
+			 * assumptions (for lack of documentation):
+			 * - actual_length bytes of first frame in error are
 			 *   successfully sent
 			 * - all following frames are not sent at all
 			 */
-			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
-				__func__);
-			offset = done->limit;	/* just in case */
+			offset = done->limit;	/* default (no error) */
 			for (i = 0; i < BAS_NUMFRAMES; i++) {
 				ifd = &urb->iso_frame_desc[i];
 				if (ifd->status ||
@@ -1122,7 +1152,7 @@ static void write_iso_tasklet(unsigned long data)
 			}
 #endif
 			break;
-		case -EPIPE:		//FIXME is this the code for "underrun"?
+		case -EPIPE:			/* stall - probably underrun */
 			dev_err(cs->dev, "isochronous write stalled\n");
 			error_hangup(bcs);
 			break;
@@ -1142,7 +1172,8 @@ static void write_iso_tasklet(unsigned long data)
 		spin_unlock_irqrestore(&ubc->isooutlock, flags);
 		if (next) {
 			/* only one URB still active - resubmit one */
-			if (submit_iso_write_urb(next) <= 0) {
+			rc = submit_iso_write_urb(next);
+			if (unlikely(rc <= 0 && rc != -ENODEV)) {
 				/* couldn't submit */
 				error_hangup(bcs);
 			}
@@ -1222,10 +1253,9 @@ static void read_iso_tasklet(unsigned long data)
 			break;
 		case -ENOENT:
 		case -ECONNRESET:
-			gig_dbg(DEBUG_ISO, "%s: URB canceled", __func__);
-			continue;		/* -> skip */
-		case -EINPROGRESS:		/* huh? */
-			gig_dbg(DEBUG_ISO, "%s: URB still pending", __func__);
+		case -EINPROGRESS:
+			gig_dbg(DEBUG_ISO, "%s: %s",
+				__func__, get_usb_statmsg(urb->status));
 			continue;		/* -> skip */
 		case -EPIPE:
 			dev_err(cs->dev, "isochronous read stalled\n");
@@ -1290,13 +1320,11 @@ static void read_iso_tasklet(unsigned long data)
 		urb->dev = bcs->cs->hw.bas->udev;
 		urb->transfer_flags = URB_ISO_ASAP;
 		urb->number_of_packets = BAS_NUMFRAMES;
-		spin_lock_irqsave(&cs->lock, flags);
-		rc = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
-		spin_unlock_irqrestore(&cs->lock, flags);
-		if (rc) {
+		rc = usb_submit_urb(urb, SLAB_ATOMIC);
+		if (unlikely(rc != 0 && rc != -ENODEV)) {
 			dev_err(cs->dev,
 				"could not resubmit isochronous read URB: %s\n",
-				get_usb_statmsg(rc));
+				get_usb_rcmsg(rc));
 			dump_urb(DEBUG_ISO, "resubmit iso read", urb);
 			error_hangup(bcs);
 		}
@@ -1397,7 +1425,6 @@ static void write_ctrl_callback(struct urb *urb, struct pt_regs *regs)
  *	timeout	timeout in seconds (0: no timeout)
  * return value:
  *	0 on success
- *	-EINVAL if a NULL pointer is encountered somewhere
  *	-EBUSY if another request is pending
  *	any URB submission error code
  */
@@ -1418,12 +1445,6 @@ static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
 			req, ucs->pending);
 		return -EBUSY;
 	}
-	if (ucs->urb_ctrl->status == -EINPROGRESS) {
-		spin_unlock_irqrestore(&ucs->lock, flags);
-		dev_err(bcs->cs->dev,
-			"could not submit request 0x%02x: URB busy\n", req);
-		return -EBUSY;
-	}
 
 	ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ;
 	ucs->dr_ctrl.bRequest = req;
@@ -1465,22 +1486,36 @@ static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
 static int gigaset_init_bchannel(struct bc_state *bcs)
 {
 	int req, ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcs->cs->lock, flags);
+	if (unlikely(!bcs->cs->connected)) {
+		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
+		return -ENODEV;
+	}
 
 	if ((ret = starturbs(bcs)) < 0) {
 		dev_err(bcs->cs->dev,
-			"could not start isochronous I/O for channel %d\n",
-			bcs->channel + 1);
-		error_hangup(bcs);
+			"could not start isochronous I/O for channel B%d: %s\n",
+			bcs->channel + 1,
+			ret == -EFAULT ? "null URB" : get_usb_rcmsg(ret));
+		if (ret != -ENODEV)
+			error_hangup(bcs);
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
 		return ret;
 	}
 
 	req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
 	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) {
-		dev_err(bcs->cs->dev, "could not open channel %d: %s\n",
-			bcs->channel + 1, get_usb_statmsg(ret));
+		dev_err(bcs->cs->dev, "could not open channel B%d\n",
+			bcs->channel + 1);
 		stopurbs(bcs->hw.bas);
-		error_hangup(bcs);
+		if (ret != -ENODEV)
+			error_hangup(bcs);
 	}
+
+	spin_unlock_irqrestore(&bcs->cs->lock, flags);
 	return ret;
 }
 
@@ -1497,19 +1532,30 @@ static int gigaset_init_bchannel(struct bc_state *bcs)
 static int gigaset_close_bchannel(struct bc_state *bcs)
 {
 	int req, ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcs->cs->lock, flags);
+	if (unlikely(!bcs->cs->connected)) {
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
+		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+		return -ENODEV;
+	}
 
 	if (!(atomic_read(&bcs->cs->hw.bas->basstate) &
 	      (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) {
 		/* channel not running: just signal common.c */
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
 		gigaset_bchannel_down(bcs);
 		return 0;
 	}
 
+	/* channel running: tell device to close it */
 	req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
 	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0)
-		dev_err(bcs->cs->dev,
-			"could not submit HD_CLOSE_BxCHANNEL request: %s\n",
-			get_usb_statmsg(ret));
+		dev_err(bcs->cs->dev, "closing channel B%d failed\n",
+			bcs->channel + 1);
+
+	spin_unlock_irqrestore(&bcs->cs->lock, flags);
 	return ret;
 }
 
@@ -1545,8 +1591,6 @@ static void complete_cb(struct cardstate *cs)
 	kfree(cb);
 }
 
-static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len);
-
 /* write_command_callback
  * USB completion handler for AT command transmission
  * called by the USB subsystem in interrupt context
@@ -1560,13 +1604,17 @@ static void write_command_callback(struct urb *urb, struct pt_regs *regs)
 	struct bas_cardstate *ucs = cs->hw.bas;
 	unsigned long flags;
 
+	update_basstate(ucs, 0, BS_ATWRPEND);
+
 	/* check status */
 	switch (urb->status) {
 	case 0:					/* normal completion */
 		break;
-	case -ENOENT:			/* canceled */
-	case -ECONNRESET:		/* canceled (async) */
+	case -ENOENT:			/* cancelled */
+	case -ECONNRESET:		/* cancelled (async) */
 	case -EINPROGRESS:		/* pending */
+	case -ENODEV:			/* device removed */
+	case -ESHUTDOWN:		/* device shut down */
 		/* ignore silently */
 		gig_dbg(DEBUG_USBREQ, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
@@ -1627,19 +1675,17 @@ static void atrdy_timeout(unsigned long data)
  *	len	length of command to send
  * return value:
  *	0 on success
- *	-EFAULT if a NULL pointer is encountered somewhere
  *	-EBUSY if another request is pending
  *	any URB submission error code
  */
 static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
 {
 	struct bas_cardstate *ucs = cs->hw.bas;
-	unsigned long flags;
-	int ret;
+	int rc;
 
 	gig_dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len);
 
-	if (ucs->urb_cmd_out->status == -EINPROGRESS) {
+	if (update_basstate(ucs, BS_ATWRPEND, 0) & BS_ATWRPEND) {
 		dev_err(cs->dev,
 			"could not submit HD_WRITE_ATMESSAGE: URB busy\n");
 		return -EBUSY;
@@ -1654,29 +1700,22 @@ static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
 			     usb_sndctrlpipe(ucs->udev, 0),
 			     (unsigned char*) &ucs->dr_cmd_out, buf, len,
 			     write_command_callback, cs);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	ret = cs->connected ? usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC) : -ENODEV;
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	if (ret) {
+	rc = usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC);
+	if (unlikely(rc)) {
+		update_basstate(ucs, 0, BS_ATWRPEND);
 		dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: %s\n",
-			get_usb_statmsg(ret));
-		return ret;
+			get_usb_rcmsg(rc));
+		return rc;
 	}
 
-	/* submitted successfully */
-	update_basstate(ucs, 0, BS_ATREADY);
-
-	/* start timeout if necessary */
-	if (!(atomic_read(&ucs->basstate) & BS_ATTIMER)) {
+	/* submitted successfully, start timeout if necessary */
+	if (!(update_basstate(ucs, BS_ATTIMER, BS_ATREADY) & BS_ATTIMER)) {
 		gig_dbg(DEBUG_OUTPUT, "setting ATREADY timeout of %d/10 secs",
 			ATRDY_TIMEOUT);
 		ucs->timer_atrdy.expires = jiffies + ATRDY_TIMEOUT * HZ / 10;
 		ucs->timer_atrdy.data = (unsigned long) cs;
 		ucs->timer_atrdy.function = atrdy_timeout;
 		add_timer(&ucs->timer_atrdy);
-		update_basstate(ucs, BS_ATTIMER, 0);
 	}
 	return 0;
 }
@@ -1702,7 +1741,6 @@ static int start_cbsend(struct cardstate *cs)
 		gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "AT channel not open");
 		rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT);
 		if (rc < 0) {
-			dev_err(cs->dev, "could not open AT channel\n");
 			/* flush command queue */
 			spin_lock_irqsave(&cs->cmdlock, flags);
 			while (cs->cmdbuf != NULL)
@@ -1786,8 +1824,14 @@ static int gigaset_write_cmd(struct cardstate *cs,
 	cs->lastcmdbuf = cb;
 	spin_unlock_irqrestore(&cs->cmdlock, flags);
 
+	spin_lock_irqsave(&cs->lock, flags);
+	if (unlikely(!cs->connected)) {
+		spin_unlock_irqrestore(&cs->lock, flags);
+		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+		return -ENODEV;
+	}
 	status = start_cbsend(cs);
-
+	spin_unlock_irqrestore(&cs->lock, flags);
 	return status < 0 ? status : len;
 }
 
@@ -1849,12 +1893,32 @@ static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
  */
 static int gigaset_freebcshw(struct bc_state *bcs)
 {
-	if (!bcs->hw.bas)
+	struct bas_bc_state *ubc = bcs->hw.bas;
+	int i;
+
+	if (!ubc)
 		return 0;
 
-	if (bcs->hw.bas->isooutbuf)
-		kfree(bcs->hw.bas->isooutbuf);
-	kfree(bcs->hw.bas);
+	/* kill URBs and tasklets before freeing - better safe than sorry */
+	atomic_set(&ubc->running, 0);
+	for (i = 0; i < BAS_OUTURBS; ++i)
+		if (ubc->isoouturbs[i].urb) {
+			gig_dbg(DEBUG_INIT, "%s: killing iso out URB %d",
+				__func__, i);
+			usb_kill_urb(ubc->isoouturbs[i].urb);
+			usb_free_urb(ubc->isoouturbs[i].urb);
+		}
+	for (i = 0; i < BAS_INURBS; ++i)
+		if (ubc->isoinurbs[i]) {
+			gig_dbg(DEBUG_INIT, "%s: killing iso in URB %d",
+				__func__, i);
+			usb_kill_urb(ubc->isoinurbs[i]);
+			usb_free_urb(ubc->isoinurbs[i]);
+		}
+	tasklet_kill(&ubc->sent_tasklet);
+	tasklet_kill(&ubc->rcvd_tasklet);
+	kfree(ubc->isooutbuf);
+	kfree(ubc);
 	bcs->hw.bas = NULL;
 	return 1;
 }
@@ -1931,13 +1995,9 @@ static void gigaset_reinitbcshw(struct bc_state *bcs)
 
 static void gigaset_freecshw(struct cardstate *cs)
 {
-	struct bas_cardstate *ucs = cs->hw.bas;
-
-	del_timer(&ucs->timer_ctrl);
-	del_timer(&ucs->timer_atrdy);
-	del_timer(&ucs->timer_cmd_in);
-
+	/* timers, URBs and rcvbuf are disposed of in disconnect */
 	kfree(cs->hw.bas);
+	cs->hw.bas = NULL;
 }
 
 static int gigaset_initcshw(struct cardstate *cs)
@@ -2041,23 +2101,13 @@ static int gigaset_probe(struct usb_interface *interface,
 	struct bas_bc_state *ubc;
 	struct usb_endpoint_descriptor *endpoint;
 	int i, j;
-	int ret;
+	int rc;
 
 	gig_dbg(DEBUG_ANY,
 		"%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
 		__func__, le16_to_cpu(udev->descriptor.idVendor),
 		le16_to_cpu(udev->descriptor.idProduct));
 
-	/* See if the device offered us matches what we can accept */
-	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_GIGA_VENDOR_ID) ||
-	    (le16_to_cpu(udev->descriptor.idProduct) != USB_GIGA_PRODUCT_ID &&
-	     le16_to_cpu(udev->descriptor.idProduct) != USB_4175_PRODUCT_ID &&
-	     le16_to_cpu(udev->descriptor.idProduct) != USB_SX303_PRODUCT_ID &&
-	     le16_to_cpu(udev->descriptor.idProduct) != USB_SX353_PRODUCT_ID)) {
-		gig_dbg(DEBUG_ANY, "%s: unmatched ID - exiting", __func__);
-		return -ENODEV;
-	}
-
 	/* set required alternate setting */
 	hostif = interface->cur_altsetting;
 	if (hostif->desc.bAlternateSetting != 3) {
@@ -2105,45 +2155,22 @@ static int gigaset_probe(struct usb_interface *interface,
 	 * - three for the different uses of the default control pipe
 	 * - three for each isochronous pipe
 	 */
-	ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_int_in) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
-	ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_cmd_in) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
-	ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_cmd_out) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
-	ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_ctrl) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
+	if (!(ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL)) ||
+	    !(ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL)) ||
+	    !(ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL)) ||
+	    !(ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL)))
+		goto allocerr;
 
 	for (j = 0; j < 2; ++j) {
 		ubc = cs->bcs[j].hw.bas;
-		for (i = 0; i < BAS_OUTURBS; ++i) {
-			ubc->isoouturbs[i].urb =
-				usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
-			if (!ubc->isoouturbs[i].urb) {
-				dev_err(cs->dev, "no free urbs available\n");
-				goto error;
-			}
-		}
-		for (i = 0; i < BAS_INURBS; ++i) {
-			ubc->isoinurbs[i] =
-				usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
-			if (!ubc->isoinurbs[i]) {
-				dev_err(cs->dev, "no free urbs available\n");
-				goto error;
-			}
-		}
+		for (i = 0; i < BAS_OUTURBS; ++i)
+			if (!(ubc->isoouturbs[i].urb =
+			      usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL)))
+				goto allocerr;
+		for (i = 0; i < BAS_INURBS; ++i)
+			if (!(ubc->isoinurbs[i] =
+			      usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL)))
+				goto allocerr;
 	}
 
 	ucs->rcvbuf = NULL;
@@ -2156,15 +2183,14 @@ static int gigaset_probe(struct usb_interface *interface,
 					(endpoint->bEndpointAddress) & 0x0f),
 			 ucs->int_in_buf, 3, read_int_callback, cs,
 			 endpoint->bInterval);
-	ret = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL);
-	if (ret) {
+	if ((rc = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL)) != 0) {
 		dev_err(cs->dev, "could not submit interrupt URB: %s\n",
-			get_usb_statmsg(ret));
+			get_usb_rcmsg(rc));
 		goto error;
 	}
 
 	/* tell the device that the driver is ready */
-	if ((ret = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
+	if ((rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
 		goto error;
 
 	/* tell common part that the device is ready */
@@ -2179,6 +2205,8 @@ static int gigaset_probe(struct usb_interface *interface,
 
 	return 0;
 
+allocerr:
+	dev_err(cs->dev, "could not allocate URBs\n");
 error:
 	freeurbs(cs);
 	usb_set_intfdata(interface, NULL);
@@ -2193,19 +2221,34 @@ static void gigaset_disconnect(struct usb_interface *interface)
 {
 	struct cardstate *cs;
 	struct bas_cardstate *ucs;
+	int j;
 
 	cs = usb_get_intfdata(interface);
 
 	ucs = cs->hw.bas;
 
 	dev_info(cs->dev, "disconnecting Gigaset base\n");
+
+	/* mark base as not ready, all channels disconnected */
+	atomic_set(&ucs->basstate, 0);
+
+	/* tell LL all channels are down */
+	//FIXME shouldn't gigaset_stop() do this?
+	for (j = 0; j < 2; ++j)
+		gigaset_bchannel_down(cs->bcs + j);
+
+	/* stop driver (common part) */
 	gigaset_stop(cs);
+
+	/* stop timers and URBs, free ressources */
+	del_timer_sync(&ucs->timer_ctrl);
+	del_timer_sync(&ucs->timer_atrdy);
+	del_timer_sync(&ucs->timer_cmd_in);
 	freeurbs(cs);
 	usb_set_intfdata(interface, NULL);
 	kfree(ucs->rcvbuf);
 	ucs->rcvbuf = NULL;
 	ucs->rcvbuf_size = 0;
-	atomic_set(&ucs->basstate, 0);
 	usb_put_dev(ucs->udev);
 	ucs->interface = NULL;
 	ucs->udev = NULL;
@@ -2277,6 +2320,8 @@ error:	if (cardstate)
  */
 static void __exit bas_gigaset_exit(void)
 {
+	struct bas_cardstate *ucs = cardstate->hw.bas;
+
 	gigaset_blockdriver(driver); /* => probe will fail
 				      * => no gigaset_start any more
 				      */
@@ -2284,14 +2329,26 @@ static void __exit bas_gigaset_exit(void)
 	gigaset_shutdown(cardstate);
 	/* from now on, no isdn callback should be possible */
 
-	if (atomic_read(&cardstate->hw.bas->basstate) & BS_ATOPEN) {
-		gig_dbg(DEBUG_ANY, "closing AT channel");
-		if (req_submit(cardstate->bcs,
-			       HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT) >= 0) {
-			/* successfully submitted */
-			//FIXME wait for completion?
-		}
+	/* close all still open channels */
+	if (atomic_read(&ucs->basstate) & BS_B1OPEN) {
+		gig_dbg(DEBUG_INIT, "closing B1 channel");
+		usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+				HD_CLOSE_B1CHANNEL, OUT_VENDOR_REQ, 0, 0,
+				NULL, 0, BAS_TIMEOUT);
+	}
+	if (atomic_read(&ucs->basstate) & BS_B2OPEN) {
+		gig_dbg(DEBUG_INIT, "closing B2 channel");
+		usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+				HD_CLOSE_B2CHANNEL, OUT_VENDOR_REQ, 0, 0,
+				NULL, 0, BAS_TIMEOUT);
+	}
+	if (atomic_read(&ucs->basstate) & BS_ATOPEN) {
+		gig_dbg(DEBUG_INIT, "closing AT channel");
+		usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+				HD_CLOSE_ATCHANNEL, OUT_VENDOR_REQ, 0, 0,
+				NULL, 0, BAS_TIMEOUT);
 	}
+	atomic_set(&ucs->basstate, 0);
 
 	/* deregister this driver with the USB subsystem */
 	usb_deregister(&gigaset_usb_driver);
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 749b3da1236..e55767b2ccd 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -781,8 +781,7 @@ error:	if (cs)
 }
 EXPORT_SYMBOL_GPL(gigaset_initcs);
 
-/* ReInitialize the b-channel structure */
-/* e.g. called on hangup, disconnect */
+/* ReInitialize the b-channel structure on hangup */
 void gigaset_bcs_reinit(struct bc_state *bcs)
 {
 	struct sk_buff *skb;
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index 1ba3424a286..18e05c09b71 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -373,6 +373,9 @@ struct reply_t gigaset_tab_cid_m10x[] = /* for M10x */
 
 	{EV_TIMEOUT,  750,750, -1,                  0, 0, {ACT_CONNTIMEOUT}},
 
+	/* B channel closed (general case) */
+	{EV_BC_CLOSED, -1, -1, -1,                 -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
+
 	/* misc. */
 	{EV_PROTO_L2,  -1, -1, -1,                 -1,-1, {ACT_PROTO_L2}}, //FIXME
 
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 9d21ba8757b..22b9693f7c0 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -75,7 +75,7 @@ extern int gigaset_debuglevel;	/* "needs" cast to (enum debuglevel) */
  * e.g. 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and
  * DEBUG_INTR.
  */
-enum debuglevel { /* up to 24 bits (atomic_t) */
+enum debuglevel {
 	DEBUG_REG	  = 0x0002, /* serial port I/O register operations */
 	DEBUG_OPEN	  = 0x0004, /* open/close serial port */
 	DEBUG_INTR	  = 0x0008, /* interrupt processing */
@@ -141,7 +141,7 @@ enum debuglevel { /* up to 24 bits (atomic_t) */
 			printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \
 			       ## arg); \
 	} while (0)
-#define DEBUG_DEFAULT (DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
+#define DEBUG_DEFAULT (DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
 
 #else
 
@@ -627,8 +627,7 @@ struct gigaset_ops {
 	/* Called by gigaset_freecs() for freeing bcs->hw.xxx */
 	int (*freebcshw)(struct bc_state *bcs);
 
-	/* Called by gigaset_stop() or gigaset_bchannel_down() for resetting
-	   bcs->hw.xxx */
+	/* Called by gigaset_bchannel_down() for resetting bcs->hw.xxx */
 	void (*reinitbcshw)(struct bc_state *bcs);
 
 	/* Called by gigaset_initcs() for setting up cs->hw.xxx */
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 0815dbfb829..1654fa41357 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -73,7 +73,7 @@ static int writebuf_from_LL(int driverID, int channel, int ack,
 		len, skblen, (unsigned) skb->head[0], (unsigned) skb->head[1]);
 
 	/* pass to device-specific module */
-	return cs->ops->send_skb(bcs, skb); //FIXME cs->ops->send_skb() must handle !cs->connected correctly
+	return cs->ops->send_skb(bcs, skb);
 }
 
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 45f017ed6e8..8667daaa1a8 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -992,14 +992,18 @@ int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb)
 	int len = skb->len;
 	unsigned long flags;
 
+	spin_lock_irqsave(&bcs->cs->lock, flags);
+	if (!bcs->cs->connected) {
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
+		return -ENODEV;
+	}
+
 	skb_queue_tail(&bcs->squeue, skb);
 	gig_dbg(DEBUG_ISO, "%s: skb queued, qlen=%d",
 		__func__, skb_queue_len(&bcs->squeue));
 
 	/* tasklet submits URB if necessary */
-	spin_lock_irqsave(&bcs->cs->lock, flags);
-	if (bcs->cs->connected)
-		tasklet_schedule(&bcs->hw.bas->sent_tasklet);
+	tasklet_schedule(&bcs->hw.bas->sent_tasklet);
 	spin_unlock_irqrestore(&bcs->cs->lock, flags);
 
 	return len;	/* ok so far */
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index bfb73fd5077..d86ab68114b 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -710,8 +710,8 @@ static int gigaset_probe(struct usb_interface *interface,
 	retval = -ENODEV; //FIXME
 
 	/* See if the device offered us matches what we can accept */
-	if ((le16_to_cpu(udev->descriptor.idVendor  != USB_M105_VENDOR_ID)) ||
-	    (le16_to_cpu(udev->descriptor.idProduct != USB_M105_PRODUCT_ID)))
+	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_M105_VENDOR_ID) ||
+	    (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID))
 		return -ENODEV;
 
 	/* this starts to become ascii art... */
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3585fb1f334..2ac90242d26 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -2880,7 +2880,7 @@ isdn_tty_cmd_ATand(char **p, modem_info * info)
 			p[0]++;
 			i = 0;
 			while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
-			       (i < ISDN_LMSNLEN))
+			       (i < ISDN_LMSNLEN - 1))
 				m->lmsn[i++] = *p[0]++;
 			m->lmsn[i] = '\0';
 			break;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3f5b6479454..626506234b7 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -4,8 +4,11 @@ menu "LED devices"
 config NEW_LEDS
 	bool "LED Support"
 	help
-	  Say Y to enable Linux LED support.  This is not related to standard
-	  keyboard LEDs which are controlled via the input system.
+	  Say Y to enable Linux LED support.  This allows control of supported
+	  LEDs from both userspace and optionally, by kernel events (triggers).
+
+	  This is not related to standard keyboard LEDs which are controlled
+	  via the input system.
 
 config LEDS_CLASS
 	tristate "LED Class Support"
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b0b5d05fadd..c75d0ef1609 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/timer.h>
 #include <linux/err.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"
 
@@ -43,9 +44,13 @@ static ssize_t led_brightness_store(struct class_device *dev,
 	ssize_t ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
 
-	if (after - buf > 0) {
-		ret = after - buf;
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
+		ret = count;
 		led_set_brightness(led_cdev, state);
 	}
 
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index f484b5d6dbf..fbf141ef46e 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/timer.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"
 
@@ -69,11 +70,15 @@ static ssize_t led_delay_on_store(struct class_device *dev, const char *buf,
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
 
-	if (after - buf > 0) {
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
 		timer_data->delay_on = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}
 
 	return ret;
@@ -97,11 +102,15 @@ static ssize_t led_delay_off_store(struct class_device *dev, const char *buf,
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
+
+	if (*after && isspace(*after))
+		count++;
 
-	if (after - buf > 0) {
+	if (count == size) {
 		timer_data->delay_off = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}
 
 	return ret;
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 5ebfd1d138d..5282fec1707 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -627,8 +627,8 @@ thermostat_init(void)
 	if(therm_type == ADT7460)
 		device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
 
-#ifndef CONFIG_I2C_KEYWEST
-	request_module("i2c-keywest");
+#ifndef CONFIG_I2C_POWERMAC
+	request_module("i2c-powermac");
 #endif
 
 	return i2c_add_driver(&thermostat_driver);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1ed5152db45..f19b874753a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -163,9 +163,19 @@ void md_new_event(mddev_t *mddev)
 {
 	atomic_inc(&md_event_count);
 	wake_up(&md_event_waiters);
+	sysfs_notify(&mddev->kobj, NULL, "sync_action");
 }
 EXPORT_SYMBOL_GPL(md_new_event);
 
+/* Alternate version that can be called from interrupts
+ * when calling sysfs_notify isn't needed.
+ */
+void md_new_event_inintr(mddev_t *mddev)
+{
+	atomic_inc(&md_event_count);
+	wake_up(&md_event_waiters);
+}
+
 /*
  * Enables to iterate over all existing md arrays
  * all_mddevs_lock protects this list.
@@ -278,11 +288,6 @@ static inline int mddev_lock(mddev_t * mddev)
 	return mutex_lock_interruptible(&mddev->reconfig_mutex);
 }
 
-static inline void mddev_lock_uninterruptible(mddev_t * mddev)
-{
-	mutex_lock(&mddev->reconfig_mutex);
-}
-
 static inline int mddev_trylock(mddev_t * mddev)
 {
 	return mutex_trylock(&mddev->reconfig_mutex);
@@ -2256,7 +2261,7 @@ action_store(mddev_t *mddev, const char *page, size_t len)
 	} else {
 		if (cmd_match(page, "check"))
 			set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
-		else if (cmd_match(page, "repair"))
+		else if (!cmd_match(page, "repair"))
 			return -EINVAL;
 		set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 		set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -2457,9 +2462,11 @@ md_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 
 	if (!entry->show)
 		return -EIO;
-	mddev_lock(mddev);
-	rv = entry->show(mddev, page);
-	mddev_unlock(mddev);
+	rv = mddev_lock(mddev);
+	if (!rv) {
+		rv = entry->show(mddev, page);
+		mddev_unlock(mddev);
+	}
 	return rv;
 }
 
@@ -2473,9 +2480,11 @@ md_attr_store(struct kobject *kobj, struct attribute *attr,
 
 	if (!entry->store)
 		return -EIO;
-	mddev_lock(mddev);
-	rv = entry->store(mddev, page, length);
-	mddev_unlock(mddev);
+	rv = mddev_lock(mddev);
+	if (!rv) {
+		rv = entry->store(mddev, page, length);
+		mddev_unlock(mddev);
+	}
 	return rv;
 }
 
@@ -4149,7 +4158,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
 	set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);
-	md_new_event(mddev);
+	md_new_event_inintr(mddev);
 }
 
 /* seq_file implementation /proc/mdstat */
@@ -4340,8 +4349,9 @@ static int md_seq_show(struct seq_file *seq, void *v)
 		return 0;
 	}
 
-	if (mddev_lock(mddev)!=0) 
+	if (mddev_lock(mddev) < 0)
 		return -EINTR;
+
 	if (mddev->pers || mddev->raid_disks || !list_empty(&mddev->disks)) {
 		seq_printf(seq, "%s : %sactive", mdname(mddev),
 						mddev->pers ? "" : "in");
@@ -5027,8 +5037,10 @@ static int md_notify_reboot(struct notifier_block *this,
 		printk(KERN_INFO "md: stopping all md devices.\n");
 
 		ITERATE_MDDEV(mddev,tmp)
-			if (mddev_trylock(mddev))
+			if (mddev_trylock(mddev)) {
 				do_md_stop (mddev, 1);
+				mddev_unlock(mddev);
+			}
 		/*
 		 * certain more exotic SCSI devices are known to be
 		 * volatile wrt too early system reboots. While the
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 678f4dbbea1..cb8c6317e4e 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -331,13 +331,14 @@ static int raid0_run (mddev_t *mddev)
 		goto out_free_conf;
 	size = conf->strip_zone[cur].size;
 
-	for (i=0; i< nb_zone; i++) {
-		conf->hash_table[i] = conf->strip_zone + cur;
+	conf->hash_table[0] = conf->strip_zone + cur;
+	for (i=1; i< nb_zone; i++) {
 		while (size <= conf->hash_spacing) {
 			cur++;
 			size += conf->strip_zone[cur].size;
 		}
 		size -= conf->hash_spacing;
+		conf->hash_table[i] = conf->strip_zone + cur;
 	}
 	if (conf->preshift) {
 		conf->hash_spacing >>= conf->preshift;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 6081941de1b..4070eff6f0f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -315,10 +315,11 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		if (r1_bio->bios[mirror] == bio)
 			break;
 
-	if (error == -ENOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
+	if (error == -EOPNOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
 		set_bit(BarriersNotsupp, &conf->mirrors[mirror].rdev->flags);
 		set_bit(R1BIO_BarrierRetry, &r1_bio->state);
 		r1_bio->mddev->barriers_work = 0;
+		/* Don't rdev_dec_pending in this branch - keep it for the retry */
 	} else {
 		/*
 		 * this branch is our 'one mirror IO has finished' event handler:
@@ -365,6 +366,7 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 				}
 			}
 		}
+		rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
 	}
 	/*
 	 *
@@ -374,11 +376,9 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
 		if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			reschedule_retry(r1_bio);
-			/* Don't dec_pending yet, we want to hold
-			 * the reference over the retry
-			 */
 			goto out;
 		}
+		/* it really is the end of this request */
 		if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
 			/* free extra copy of the data pages */
 			int i = bio->bi_vcnt;
@@ -393,8 +393,6 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		md_write_end(r1_bio->mddev);
 		raid_end_bio_io(r1_bio);
 	}
-
-	rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
  out:
 	if (to_put)
 		bio_put(to_put);
@@ -753,18 +751,24 @@ static int make_request(request_queue_t *q, struct bio * bio)
 	const int rw = bio_data_dir(bio);
 	int do_barriers;
 
-	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
-		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * Register the new request and wait if the reconstruction
 	 * thread has put up a bar for new requests.
 	 * Continue immediately if no resync is active currently.
+	 * We test barriers_work *after* md_write_start as md_write_start
+	 * may cause the first superblock write, and that will check out
+	 * if barriers work.
 	 */
+
 	md_write_start(mddev, bio); /* wait on superblock update early */
 
+	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
+		if (rw == WRITE)
+			md_write_end(mddev);
+		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
+		return 0;
+	}
+
 	wait_barrier(conf);
 
 	disk_stat_inc(mddev->gendisk, ios[rw]);
@@ -1404,10 +1408,11 @@ static void raid1d(mddev_t *mddev)
 			unplug = 1;
 		} else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			/* some requests in the r1bio were BIO_RW_BARRIER
-			 * requests which failed with -ENOTSUPP.  Hohumm..
+			 * requests which failed with -EOPNOTSUPP.  Hohumm..
 			 * Better resubmit without the barrier.
 			 * We know which devices to resubmit for, because
 			 * all others have had their bios[] entry cleared.
+			 * We already have a nr_pending reference on these rdevs.
 			 */
 			int i;
 			clear_bit(R1BIO_BarrierRetry, &r1_bio->state);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 617012bc107..1440935414e 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1407,43 +1407,54 @@ static void raid10d(mddev_t *mddev)
 				if (s > (PAGE_SIZE>>9))
 					s = PAGE_SIZE >> 9;
 
+				rcu_read_lock();
 				do {
 					int d = r10_bio->devs[sl].devnum;
-					rdev = conf->mirrors[d].rdev;
+					rdev = rcu_dereference(conf->mirrors[d].rdev);
 					if (rdev &&
-					    test_bit(In_sync, &rdev->flags) &&
-					    sync_page_io(rdev->bdev,
-							 r10_bio->devs[sl].addr +
-							 sect + rdev->data_offset,
-							 s<<9,
-							 conf->tmppage, READ))
-						success = 1;
-					else {
-						sl++;
-						if (sl == conf->copies)
-							sl = 0;
+					    test_bit(In_sync, &rdev->flags)) {
+						atomic_inc(&rdev->nr_pending);
+						rcu_read_unlock();
+						success = sync_page_io(rdev->bdev,
+								       r10_bio->devs[sl].addr +
+								       sect + rdev->data_offset,
+								       s<<9,
+								       conf->tmppage, READ);
+						rdev_dec_pending(rdev, mddev);
+						rcu_read_lock();
+						if (success)
+							break;
 					}
+					sl++;
+					if (sl == conf->copies)
+						sl = 0;
 				} while (!success && sl != r10_bio->read_slot);
+				rcu_read_unlock();
 
 				if (success) {
 					int start = sl;
 					/* write it back and re-read */
+					rcu_read_lock();
 					while (sl != r10_bio->read_slot) {
 						int d;
 						if (sl==0)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
-						atomic_add(s, &rdev->corrected_errors);
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
+							atomic_add(s, &rdev->corrected_errors);
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, WRITE) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
 					sl = start;
@@ -1453,17 +1464,22 @@ static void raid10d(mddev_t *mddev)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
+					rcu_read_unlock();
 				} else {
 					/* Cannot read from anywhere -- bye bye array */
 					md_error(mddev, conf->mirrors[r10_bio->devs[r10_bio->read_slot].devnum].rdev);
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index fffc711c260..344d83aae3e 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -8,22 +8,54 @@ config VIDEO_DEV
 	tristate "Video For Linux"
 	---help---
 	  Support for audio/video capture and overlay devices and FM radio
-	  cards. The exact capabilities of each device vary. User tools for
-	  this are available from
-	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+	  cards. The exact capabilities of each device vary.
 
 	  This kernel includes support for the new Video for Linux Two API,
 	  (V4L2) as well as the original system. Drivers and applications
 	  need to be rewritten to use V4L2, but drivers for popular cards
 	  and applications for most video capture functions already exist.
 
-	  Documentation for the original API is included in the file
-	  <file:Documentation/video4linux/API.html>.  Documentation for V4L2 is
-	  available on the web at <http://bytesex.org/v4l/>.
+	  Additional info and docs are available on the web at
+	  <http://linuxtv.org>
+
+	  Documentation for V4L2 is also available on the web at
+	  <http://bytesex.org/v4l/>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called videodev.
 
+config VIDEO_V4L1
+	boolean "Enable Video For Linux API 1 (DEPRECATED)"
+	depends on VIDEO_DEV
+	select VIDEO_V4L1_COMPAT
+	default y
+	---help---
+	  Enables a compatibility API used by most V4L2 devices to allow
+	  its usage with legacy applications that supports only V4L1 api.
+
+	  If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L1_COMPAT
+	boolean "Enable Video For Linux API 1 compatible Layer"
+	depends on VIDEO_DEV
+	default y
+	---help---
+	  This api were developed to be used at Kernel 2.2 and 2.4, but
+	  lacks support for several video standards. There are several
+	  drivers at kernel that still depends on it.
+
+	  Documentation for the original API is included in the file
+	  <Documentation/video4linux/API.html>.
+
+	  User tools for this are available from
+	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+	  If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L2
+	tristate
+	default y
+
 source "drivers/media/video/Kconfig"
 
 source "drivers/media/radio/Kconfig"
@@ -65,4 +97,3 @@ config USB_DABUSB
 	  module will be called dabusb.
 
 endmenu
-
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 6a901a0268e..1a04db4552d 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -1,9 +1,10 @@
 config VIDEO_SAA7146
 	tristate
-	select I2C
+	depends on I2C
 
 config VIDEO_SAA7146_VV
 	tristate
+	select VIDEO_V4L2
 	select VIDEO_BUF
 	select VIDEO_VIDEOBUF
 	select VIDEO_SAA7146
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 3f0ec6be03a..a97c8f5e9a5 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -22,26 +22,26 @@ config DVB
 source "drivers/media/dvb/dvb-core/Kconfig"
 
 comment "Supported SAA7146 based PCI Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/ttpci/Kconfig"
 
 comment "Supported USB Adapters"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && I2C
 source "drivers/media/dvb/dvb-usb/Kconfig"
 source "drivers/media/dvb/ttusb-budget/Kconfig"
 source "drivers/media/dvb/ttusb-dec/Kconfig"
 source "drivers/media/dvb/cinergyT2/Kconfig"
 
 comment "Supported FlexCopII (B2C2) Adapters"
-	depends on DVB_CORE && (PCI || USB)
+	depends on DVB_CORE && (PCI || USB) && I2C
 source "drivers/media/dvb/b2c2/Kconfig"
 
 comment "Supported BT878 Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/bt8xx/Kconfig"
 
 comment "Supported Pluto2 Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/pluto2/Kconfig"
 
 comment "Supported DVB Frontends"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2963605c0ec..d7f1fd5b7b0 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,6 +1,6 @@
 config DVB_B2C2_FLEXCOP
 	tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select DVB_STV0299
 	select DVB_MT352
 	select DVB_MT312
@@ -16,7 +16,7 @@ config DVB_B2C2_FLEXCOP
 
 config DVB_B2C2_FLEXCOP_PCI
 	tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
-	depends on DVB_B2C2_FLEXCOP && PCI
+	depends on DVB_B2C2_FLEXCOP && PCI && I2C
 	help
 	  Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
 
@@ -24,7 +24,7 @@ config DVB_B2C2_FLEXCOP_PCI
 
 config DVB_B2C2_FLEXCOP_USB
 	tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
-	depends on DVB_B2C2_FLEXCOP && USB
+	depends on DVB_B2C2_FLEXCOP && USB && I2C
 	help
 	  Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
 
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 376ca48f1d1..f394002118f 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,12 +1,13 @@
 config DVB_BT8XX
 	tristate "BT8xx based PCI cards"
-	depends on DVB_CORE && PCI && VIDEO_BT848
+	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
 	select DVB_MT352
 	select DVB_SP887X
 	select DVB_NXT6000
 	select DVB_CX24110
 	select DVB_OR51211
 	select DVB_LGDT330X
+	select DVB_ZL10353
 	select FW_LOADER
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index baa8227ef87..ccc7b2eb4a2 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -115,7 +115,7 @@ static int is_pci_slot_eq(struct pci_dev* adev, struct pci_dev* bdev)
 	return 0;
 }
 
-static struct bt878 __init *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
 {
 	unsigned int card_nr;
 
@@ -709,7 +709,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 		}
 }
 
-static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
 {
 	int result;
 
@@ -794,7 +794,7 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
 	return 0;
 }
 
-static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
 {
 	struct dvb_bt8xx_card *card;
 	struct pci_dev* bttv_pci_dev;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 71b575dc22b..9325d039ea6 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -902,7 +902,10 @@ static int cinergyt2_probe (struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
-	dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE);
+	if ((err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE)) < 0) {
+		kfree(cinergyt2);
+		return err;
+	}
 
 	cinergyt2->demux.priv = cinergyt2;
 	cinergyt2->demux.filternum = 256;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 4f8f257e679..a051790161b 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -106,6 +106,8 @@ struct dvb_frontend_private {
 	unsigned long tune_mode_flags;
 	unsigned int delay;
 	unsigned int reinitialise;
+	int tone;
+	int voltage;
 
 	/* swzigzag values */
 	unsigned int state;
@@ -537,6 +539,12 @@ static int dvb_frontend_thread(void *data)
 
 		if (fepriv->reinitialise) {
 			dvb_frontend_init(fe);
+			if (fepriv->tone != -1) {
+				fe->ops->set_tone(fe, fepriv->tone);
+			}
+			if (fepriv->voltage != -1) {
+				fe->ops->set_voltage(fe, fepriv->voltage);
+			}
 			fepriv->reinitialise = 0;
 		}
 
@@ -788,6 +796,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 	case FE_SET_TONE:
 		if (fe->ops->set_tone) {
 			err = fe->ops->set_tone(fe, (fe_sec_tone_mode_t) parg);
+			fepriv->tone = (fe_sec_tone_mode_t) parg;
 			fepriv->state = FESTATE_DISEQC;
 			fepriv->status = 0;
 		}
@@ -796,6 +805,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 	case FE_SET_VOLTAGE:
 		if (fe->ops->set_voltage) {
 			err = fe->ops->set_voltage(fe, (fe_sec_voltage_t) parg);
+			fepriv->voltage = (fe_sec_voltage_t) parg;
 			fepriv->state = FESTATE_DISEQC;
 			fepriv->status = 0;
 		}
@@ -995,6 +1005,8 @@ static int dvb_frontend_open(struct inode *inode, struct file *file)
 
 		/* normal tune mode when opened R/W */
 		fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
+		fepriv->tone = -1;
+		fepriv->voltage = -1;
 	}
 
 	return ret;
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 96fe0ecae25..3852430d026 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -219,8 +219,6 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		return -ENOMEM;
 	}
 
-	mutex_unlock(&dvbdev_register_lock);
-
 	memcpy(dvbdev, template, sizeof(struct dvb_device));
 	dvbdev->type = type;
 	dvbdev->id = id;
@@ -231,6 +229,8 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 
 	list_add_tail (&dvbdev->list_head, &adap->device_list);
 
+	mutex_unlock(&dvbdev_register_lock);
+
 	devfs_mk_cdev(MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
 			S_IFCHR | S_IRUSR | S_IWUSR,
 			"dvb/adapter%d/%s%d", adap->num, dnames[type], id);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index d3df12039b0..e388fb1567d 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && I2C
 	select FW_LOADER
 	help
 	  By enabling this you will be able to choose the various supported
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 7edd6362b9c..1f0d3e995c8 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -150,6 +150,15 @@ static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff)
 		return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
 }
 
+static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 b = 0;
+	if (onoff)
+		return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
+	else
+		return 0;
+}
+
 static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	u8 buf[2] = { 0x03, 0x00 };
@@ -544,7 +553,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_lgdt3303_frontend_attach,
 	.tuner_attach     = cxusb_lgh064f_tuner_attach,
 
@@ -589,7 +598,7 @@ static struct dvb_usb_properties cxusb_bluebird_dee1601_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_dee1601_frontend_attach,
 	.tuner_attach     = cxusb_dee1601_tuner_attach,
 
@@ -638,7 +647,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgz201_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_mt352_frontend_attach,
 	.tuner_attach     = cxusb_lgz201_tuner_attach,
 
@@ -683,7 +692,7 @@ static struct dvb_usb_properties cxusb_bluebird_dtt7579_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_mt352_frontend_attach,
 	.tuner_attach     = cxusb_dtt7579_tuner_attach,
 
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index d661c6f9cbe..691dc840dcc 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -29,6 +29,9 @@
 #include "dvb_frontend.h"
 #include "cx24123.h"
 
+#define XTAL 10111000
+
+static int force_band;
 static int debug;
 #define dprintk(args...) \
 	do { \
@@ -52,6 +55,7 @@ struct cx24123_state
 	u32 VGAarg;
 	u32 bandselectarg;
 	u32 pllarg;
+	u32 FILTune;
 
 	/* The Demod/Tuner can't easily provide these, we cache them */
 	u32 currentfreq;
@@ -63,43 +67,33 @@ static struct
 {
 	u32 symbolrate_low;
 	u32 symbolrate_high;
-	u32 VCAslope;
-	u32 VCAoffset;
-	u32 VGA1offset;
-	u32 VGA2offset;
 	u32 VCAprogdata;
 	u32 VGAprogdata;
+	u32 FILTune;
 } cx24123_AGC_vals[] =
 {
 	{
 		.symbolrate_low		= 1000000,
 		.symbolrate_high	= 4999999,
-		.VCAslope		= 0x07,
-		.VCAoffset		= 0x0f,
-		.VGA1offset		= 0x1f8,
-		.VGA2offset		= 0x1f8,
-		.VGAprogdata		= (2 << 18) | (0x1f8 << 9) | 0x1f8,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x07,
+		/* the specs recommend other values for VGA offsets,
+		   but tests show they are wrong */
+		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x07,
+		.FILTune		= 0x27f /* 0.41 V */
 	},
 	{
 		.symbolrate_low		=  5000000,
 		.symbolrate_high	= 14999999,
-		.VCAslope		= 0x1f,
-		.VCAoffset		= 0x1f,
-		.VGA1offset		= 0x1e0,
-		.VGA2offset		= 0x180,
-		.VGAprogdata		= (2 << 18) | (0x180 << 9) | 0x1e0,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x1f,
+		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x1f,
+		.FILTune		= 0x317 /* 0.90 V */
 	},
 	{
 		.symbolrate_low		= 15000000,
 		.symbolrate_high	= 45000000,
-		.VCAslope		= 0x3f,
-		.VCAoffset		= 0x3f,
-		.VGA1offset		= 0x180,
-		.VGA2offset		= 0x100,
-		.VGAprogdata		= (2 << 18) | (0x100 << 9) | 0x180,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x3f,
+		.VGAprogdata		= (1 << 19) | (0x100 << 9) | 0x180,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x3f,
+		.FILTune		= 0x145 /* 2.70 V */
 	},
 };
 
@@ -112,91 +106,80 @@ static struct
 {
 	u32 freq_low;
 	u32 freq_high;
-	u32 bandselect;
 	u32 VCOdivider;
-	u32 VCOnumber;
 	u32 progdata;
 } cx24123_bandselect_vals[] =
 {
+	/* band 1 */
 	{
 		.freq_low	= 950000,
-		.freq_high	= 1018999,
-		.bandselect	= 0x40,
-		.VCOdivider	= 4,
-		.VCOnumber	= 7,
-		.progdata	= (0 << 18) | (0 << 9) | 0x40,
-	},
-	{
-		.freq_low	= 1019000,
 		.freq_high	= 1074999,
-		.bandselect	= 0x80,
 		.VCOdivider	= 4,
-		.VCOnumber	= 8,
-		.progdata	= (0 << 18) | (0 << 9) | 0x80,
+		.progdata	= (0 << 19) | (0 << 9) | 0x40,
 	},
+
+	/* band 2 */
 	{
 		.freq_low	= 1075000,
-		.freq_high	= 1227999,
-		.bandselect	= 0x01,
-		.VCOdivider	= 2,
-		.VCOnumber	= 1,
-		.progdata	= (0 << 18) | (1 << 9) | 0x01,
+		.freq_high	= 1177999,
+		.VCOdivider	= 4,
+		.progdata	= (0 << 19) | (0 << 9) | 0x80,
 	},
+
+	/* band 3 */
 	{
-		.freq_low	= 1228000,
-		.freq_high	= 1349999,
-		.bandselect	= 0x02,
+		.freq_low	= 1178000,
+		.freq_high	= 1295999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 2,
-		.progdata	= (0 << 18) | (1 << 9) | 0x02,
+		.progdata	= (0 << 19) | (1 << 9) | 0x01,
 	},
+
+	/* band 4 */
 	{
-		.freq_low	= 1350000,
-		.freq_high	= 1481999,
-		.bandselect	= 0x04,
+		.freq_low	= 1296000,
+		.freq_high	= 1431999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 3,
-		.progdata	= (0 << 18) | (1 << 9) | 0x04,
+		.progdata	= (0 << 19) | (1 << 9) | 0x02,
 	},
+
+	/* band 5 */
 	{
-		.freq_low	= 1482000,
-		.freq_high	= 1595999,
-		.bandselect	= 0x08,
+		.freq_low	= 1432000,
+		.freq_high	= 1575999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 4,
-		.progdata	= (0 << 18) | (1 << 9) | 0x08,
+		.progdata	= (0 << 19) | (1 << 9) | 0x04,
 	},
+
+	/* band 6 */
 	{
-		.freq_low	= 1596000,
+		.freq_low	= 1576000,
 		.freq_high	= 1717999,
-		.bandselect	= 0x10,
 		.VCOdivider	= 2,
-		.VCOnumber	= 5,
-		.progdata	= (0 << 18) | (1 << 9) | 0x10,
+		.progdata	= (0 << 19) | (1 << 9) | 0x08,
 	},
+
+	/* band 7 */
 	{
 		.freq_low	= 1718000,
 		.freq_high	= 1855999,
-		.bandselect	= 0x20,
 		.VCOdivider	= 2,
-		.VCOnumber	= 6,
-		.progdata	= (0 << 18) | (1 << 9) | 0x20,
+		.progdata	= (0 << 19) | (1 << 9) | 0x10,
 	},
+
+	/* band 8 */
 	{
 		.freq_low	= 1856000,
 		.freq_high	= 2035999,
-		.bandselect	= 0x40,
 		.VCOdivider	= 2,
-		.VCOnumber	= 7,
-		.progdata	= (0 << 18) | (1 << 9) | 0x40,
+		.progdata	= (0 << 19) | (1 << 9) | 0x20,
 	},
+
+	/* band 9 */
 	{
 		.freq_low	= 2036000,
-		.freq_high	= 2149999,
-		.bandselect	= 0x80,
+		.freq_high	= 2150000,
 		.VCOdivider	= 2,
-		.VCOnumber	= 8,
-		.progdata	= (0 << 18) | (1 << 9) | 0x80,
+		.progdata	= (0 << 19) | (1 << 9) | 0x40,
 	},
 };
 
@@ -207,49 +190,44 @@ static struct {
 {
 	{0x00, 0x03}, /* Reset system */
 	{0x00, 0x00}, /* Clear reset */
-	{0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
-	{0x03, 0x07},
-	{0x04, 0x10},
-	{0x05, 0x04},
-	{0x06, 0x31},
-	{0x0d, 0x02},
-	{0x0e, 0x03},
-	{0x0f, 0xfe},
-	{0x10, 0x01},
-	{0x14, 0x01},
-	{0x15, 0x98},
-	{0x16, 0x00},
-	{0x17, 0x01},
-	{0x1b, 0x05},
-	{0x1c, 0x80},
-	{0x1d, 0x00},
-	{0x1e, 0x00},
-	{0x20, 0x41},
-	{0x21, 0x15},
-	{0x27, 0x14},
-	{0x28, 0x46},
-	{0x29, 0x00},
-	{0x2a, 0xb0},
-	{0x2b, 0x73},
-	{0x2c, 0x00},
+	{0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */
+	{0x04, 0x10}, /* MPEG */
+	{0x05, 0x04}, /* MPEG */
+	{0x06, 0x31}, /* MPEG (default) */
+	{0x0b, 0x00}, /* Freq search start point (default) */
+	{0x0c, 0x00}, /* Demodulator sample gain (default) */
+	{0x0d, 0x02}, /* Frequency search range = Fsymbol / 4 (default) */
+	{0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */
+	{0x0f, 0xfe}, /* FEC search mask (all supported codes) */
+	{0x10, 0x01}, /* Default search inversion, no repeat (default) */
+	{0x16, 0x00}, /* Enable reading of frequency */
+	{0x17, 0x01}, /* Enable EsNO Ready Counter */
+	{0x1c, 0x80}, /* Enable error counter */
+	{0x20, 0x00}, /* Tuner burst clock rate = 500KHz */
+	{0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */
+	{0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */
+	{0x29, 0x00}, /* DiSEqC LNB_DC off */
+	{0x2a, 0xb0}, /* DiSEqC Parameters (default) */
+	{0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */
+	{0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */
 	{0x2d, 0x00},
 	{0x2e, 0x00},
 	{0x2f, 0x00},
 	{0x30, 0x00},
 	{0x31, 0x00},
-	{0x32, 0x8c},
-	{0x33, 0x00},
+	{0x32, 0x8c}, /* DiSEqC Parameters (default) */
+	{0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */
 	{0x34, 0x00},
-	{0x35, 0x03},
-	{0x36, 0x02},
-	{0x37, 0x3a},
-	{0x3a, 0x00},	/* Enable AGC accumulator */
-	{0x44, 0x00},
-	{0x45, 0x00},
-	{0x46, 0x05},
-	{0x56, 0x41},
-	{0x57, 0xff},
-	{0x67, 0x83},
+	{0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */
+	{0x36, 0x02}, /* DiSEqC Parameters (default) */
+	{0x37, 0x3a}, /* DiSEqC Parameters (default) */
+	{0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */
+	{0x44, 0x00}, /* Constellation (default) */
+	{0x45, 0x00}, /* Symbol count (default) */
+	{0x46, 0x0d}, /* Symbol rate estimator on (default) */
+	{0x56, 0x41}, /* Various (default) */
+	{0x57, 0xff}, /* Error Counter Window (default) */
+	{0x67, 0x83}, /* Non-DCII symbol clock */
 };
 
 static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
@@ -258,6 +236,10 @@ static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
 	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
 	int err;
 
+	if (debug>1)
+		printk("cx24123: %s:  write reg 0x%02x, value 0x%02x\n",
+						__FUNCTION__,reg, data);
+
 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
 		printk("%s: writereg error(err == %i, reg == 0x%02x,"
 			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -274,6 +256,10 @@ static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data)
 	struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
 	int err;
 
+	if (debug>1)
+		printk("cx24123: %s:  writeln addr=0x08, reg 0x%02x, value 0x%02x\n",
+						__FUNCTION__,reg, data);
+
 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
 		printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
 			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -303,6 +289,9 @@ static int cx24123_readreg(struct cx24123_state* state, u8 reg)
 		return ret;
 	}
 
+	if (debug>1)
+		printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret);
+
 	return b1[0];
 }
 
@@ -313,17 +302,23 @@ static int cx24123_readlnbreg(struct cx24123_state* state, u8 reg)
 
 static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
 {
+	u8 nom_reg = cx24123_readreg(state, 0x0e);
+	u8 auto_reg = cx24123_readreg(state, 0x10);
+
 	switch (inversion) {
 	case INVERSION_OFF:
-		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		dprintk("%s:  inversion off\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg & ~0x80);
+		cx24123_writereg(state, 0x10, auto_reg | 0x80);
 		break;
 	case INVERSION_ON:
-		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		dprintk("%s:  inversion on\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x80);
+		cx24123_writereg(state, 0x10, auto_reg | 0x80);
 		break;
 	case INVERSION_AUTO:
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
+		dprintk("%s:  inversion auto\n",__FUNCTION__);
+		cx24123_writereg(state, 0x10, auto_reg & ~0x80);
 		break;
 	default:
 		return -EINVAL;
@@ -338,92 +333,191 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers
 
 	val = cx24123_readreg(state, 0x1b) >> 7;
 
-	if (val == 0)
+	if (val == 0) {
+		dprintk("%s:  read inversion off\n",__FUNCTION__);
 		*inversion = INVERSION_OFF;
-	else
+	} else {
+		dprintk("%s:  read inversion on\n",__FUNCTION__);
 		*inversion = INVERSION_ON;
+	}
 
 	return 0;
 }
 
 static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
 {
+	u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
+
 	if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
 		fec = FEC_AUTO;
 
-	/* Hardware has 5/11 and 3/5 but are never unused */
 	switch (fec) {
-	case FEC_NONE:
-		return cx24123_writereg(state, 0x0f, 0x01);
 	case FEC_1_2:
-		return cx24123_writereg(state, 0x0f, 0x02);
+		dprintk("%s:  set FEC to 1/2\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x01);
+		cx24123_writereg(state, 0x0f, 0x02);
+		break;
 	case FEC_2_3:
-		return cx24123_writereg(state, 0x0f, 0x04);
+		dprintk("%s:  set FEC to 2/3\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x02);
+		cx24123_writereg(state, 0x0f, 0x04);
+		break;
 	case FEC_3_4:
-		return cx24123_writereg(state, 0x0f, 0x08);
+		dprintk("%s:  set FEC to 3/4\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x03);
+		cx24123_writereg(state, 0x0f, 0x08);
+		break;
+	case FEC_4_5:
+		dprintk("%s:  set FEC to 4/5\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x04);
+		cx24123_writereg(state, 0x0f, 0x10);
+		break;
 	case FEC_5_6:
-		return cx24123_writereg(state, 0x0f, 0x20);
+		dprintk("%s:  set FEC to 5/6\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x05);
+		cx24123_writereg(state, 0x0f, 0x20);
+		break;
+	case FEC_6_7:
+		dprintk("%s:  set FEC to 6/7\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x06);
+		cx24123_writereg(state, 0x0f, 0x40);
+		break;
 	case FEC_7_8:
-		return cx24123_writereg(state, 0x0f, 0x80);
+		dprintk("%s:  set FEC to 7/8\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x07);
+		cx24123_writereg(state, 0x0f, 0x80);
+		break;
 	case FEC_AUTO:
-		return cx24123_writereg(state, 0x0f, 0xae);
+		dprintk("%s:  set FEC to auto\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0f, 0xfe);
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
+
+	return 0;
 }
 
 static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
 {
 	int ret;
-	u8 val;
 
 	ret = cx24123_readreg (state, 0x1b);
 	if (ret < 0)
 		return ret;
-	val = ret & 0x07;
-	switch (val) {
+	ret = ret & 0x07;
+
+	switch (ret) {
 	case 1:
 		*fec = FEC_1_2;
 		break;
-	case 3:
+	case 2:
 		*fec = FEC_2_3;
 		break;
-	case 4:
+	case 3:
 		*fec = FEC_3_4;
 		break;
-	case 5:
+	case 4:
 		*fec = FEC_4_5;
 		break;
-	case 6:
+	case 5:
 		*fec = FEC_5_6;
 		break;
+	case 6:
+		*fec = FEC_6_7;
+		break;
 	case 7:
 		*fec = FEC_7_8;
 		break;
-	case 2:	/* *fec = FEC_3_5; break; */
-	case 0:	/* *fec = FEC_5_11; break; */
-		*fec = FEC_AUTO;
-		break;
 	default:
-		*fec = FEC_NONE; // can't happen
+		/* this can happen when there's no lock */
+		*fec = FEC_NONE;
 	}
 
 	return 0;
 }
 
-/* fixme: Symbol rates < 3MSps may not work because of precision loss */
+/* Approximation of closest integer of log2(a/b). It actually gives the
+   lowest integer i such that 2^i >= round(a/b) */
+static u32 cx24123_int_log2(u32 a, u32 b)
+{
+	u32 exp, nearest = 0;
+	u32 div = a / b;
+	if(a % b >= b / 2) ++div;
+	if(div < (1 << 31))
+	{
+		for(exp = 1; div > exp; nearest++)
+			exp += exp;
+	}
+	return nearest;
+}
+
 static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
 {
-	u32 val;
+	u32 tmp, sample_rate, ratio, sample_gain;
+	u8 pll_mult;
+
+	/*  check if symbol rate is within limits */
+	if ((srate > state->ops.info.symbol_rate_max) ||
+	    (srate < state->ops.info.symbol_rate_min))
+		return -EOPNOTSUPP;;
+
+	/* choose the sampling rate high enough for the required operation,
+	   while optimizing the power consumed by the demodulator */
+	if (srate < (XTAL*2)/2)
+		pll_mult = 2;
+	else if (srate < (XTAL*3)/2)
+		pll_mult = 3;
+	else if (srate < (XTAL*4)/2)
+		pll_mult = 4;
+	else if (srate < (XTAL*5)/2)
+		pll_mult = 5;
+	else if (srate < (XTAL*6)/2)
+		pll_mult = 6;
+	else if (srate < (XTAL*7)/2)
+		pll_mult = 7;
+	else if (srate < (XTAL*8)/2)
+		pll_mult = 8;
+	else
+		pll_mult = 9;
+
+
+	sample_rate = pll_mult * XTAL;
+
+	/*
+	    SYSSymbolRate[21:0] = (srate << 23) / sample_rate
+
+	    We have to use 32 bit unsigned arithmetic without precision loss.
+	    The maximum srate is 45000000 or 0x02AEA540. This number has
+	    only 6 clear bits on top, hence we can shift it left only 6 bits
+	    at a time. Borrowed from cx24110.c
+	*/
+
+	tmp = srate << 6;
+	ratio = tmp / sample_rate;
+
+	tmp = (tmp % sample_rate) << 6;
+	ratio = (ratio << 6) + (tmp / sample_rate);
+
+	tmp = (tmp % sample_rate) << 6;
+	ratio = (ratio << 6) + (tmp / sample_rate);
+
+	tmp = (tmp % sample_rate) << 5;
+	ratio = (ratio << 5) + (tmp / sample_rate);
+
+
+	cx24123_writereg(state, 0x01, pll_mult * 6);
 
-	val = (srate / 1185) * 100;
+	cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f );
+	cx24123_writereg(state, 0x09, (ratio >>  8) & 0xff );
+	cx24123_writereg(state, 0x0a, (ratio      ) & 0xff );
 
-	/* Compensate for scaling up, by removing 17 symbols per 1Msps */
-	val = val - (17 * (srate / 1000000));
+	/* also set the demodulator sample gain */
+	sample_gain = cx24123_int_log2(sample_rate, srate);
+	tmp = cx24123_readreg(state, 0x0c) & ~0xe0;
+	cx24123_writereg(state, 0x0c, tmp | sample_gain << 5);
 
-	cx24123_writereg(state, 0x08, (val >> 16) & 0xff );
-	cx24123_writereg(state, 0x09, (val >>  8) & 0xff );
-	cx24123_writereg(state, 0x0a, (val      ) & 0xff );
+	dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", __FUNCTION__, srate, ratio, sample_rate, sample_gain);
 
 	return 0;
 }
@@ -437,6 +531,9 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
 	struct cx24123_state *state = fe->demodulator_priv;
 	u32 ndiv = 0, adiv = 0, vco_div = 0;
 	int i = 0;
+	int pump = 2;
+	int band = 0;
+	int num_bands = sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]);
 
 	/* Defaults for low freq, low rate */
 	state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -444,38 +541,49 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
 	state->bandselectarg = cx24123_bandselect_vals[0].progdata;
 	vco_div = cx24123_bandselect_vals[0].VCOdivider;
 
-	/* For the given symbolerate, determine the VCA and VGA programming bits */
+	/* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
 	for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
 	{
 		if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
-				(cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+		    (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
 			state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
 			state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+			state->FILTune = cx24123_AGC_vals[i].FILTune;
 		}
 	}
 
-	/* For the given frequency, determine the bandselect programming bits */
-	for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+	/* determine the band to use */
+	if(force_band < 1 || force_band > num_bands)
 	{
-		if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
-				(cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
-			state->bandselectarg = cx24123_bandselect_vals[i].progdata;
-			vco_div = cx24123_bandselect_vals[i].VCOdivider;
+		for (i = 0; i < num_bands; i++)
+		{
+			if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
+			    (cx24123_bandselect_vals[i].freq_high >= p->frequency) )
+				band = i;
 		}
 	}
+	else
+		band = force_band - 1;
+
+	state->bandselectarg = cx24123_bandselect_vals[band].progdata;
+	vco_div = cx24123_bandselect_vals[band].VCOdivider;
+
+	/* determine the charge pump current */
+	if ( p->frequency < (cx24123_bandselect_vals[band].freq_low + cx24123_bandselect_vals[band].freq_high)/2 )
+		pump = 0x01;
+	else
+		pump = 0x02;
 
 	/* Determine the N/A dividers for the requested lband freq (in kHz). */
-	/* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
-	ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
-	adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+	/* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */
+	ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff;
+	adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f;
 
 	if (adiv == 0)
-		adiv++;
+		ndiv++;
 
-	/* determine the correct pll frequency values. */
-	/* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
-	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
-	state->pllarg |= (ndiv << 5) | adiv;
+	/* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */
+	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv;
 
 	return 0;
 }
@@ -489,6 +597,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par
 	struct cx24123_state *state = fe->demodulator_priv;
 	unsigned long timeout;
 
+	dprintk("%s:  pll writereg called, data=0x%08x\n",__FUNCTION__,data);
+
 	/* align the 21 bytes into to bit23 boundary */
 	data = data << 3;
 
@@ -538,6 +648,9 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par
 static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
 	struct cx24123_state *state = fe->demodulator_priv;
+	u8 val;
+
+	dprintk("frequency=%i\n", p->frequency);
 
 	if (cx24123_pll_calculate(fe, p) != 0) {
 		printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
@@ -552,6 +665,14 @@ static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_paramet
 	cx24123_pll_writereg(fe, p, state->bandselectarg);
 	cx24123_pll_writereg(fe, p, state->pllarg);
 
+	/* set the FILTUNE voltage */
+	val = cx24123_readreg(state, 0x28) & ~0x3;
+	cx24123_writereg(state, 0x27, state->FILTune >> 2);
+	cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
+
+	dprintk("%s:  pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg,
+			state->bandselectarg,state->pllarg);
+
 	return 0;
 }
 
@@ -560,6 +681,8 @@ static int cx24123_initfe(struct dvb_frontend* fe)
 	struct cx24123_state *state = fe->demodulator_priv;
 	int i;
 
+	dprintk("%s:  init frontend\n",__FUNCTION__);
+
 	/* Configure the demod to a good set of defaults */
 	for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
 		cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
@@ -587,10 +710,13 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage
 
 		switch (voltage) {
 		case SEC_VOLTAGE_13:
+			dprintk("%s:  isl6421 voltage = 13V\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
 		case SEC_VOLTAGE_18:
+			dprintk("%s:  isl6421 voltage = 18V\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
 		case SEC_VOLTAGE_OFF:
+			dprintk("%s:  isl5421 voltage off\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x30);
 		default:
 			return -EINVAL;
@@ -624,13 +750,93 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage
 	return 0;
 }
 
-static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
-				   struct dvb_diseqc_master_cmd *cmd)
+/* wait for diseqc queue to become ready (or timeout) */
+static void cx24123_wait_for_diseqc(struct cx24123_state *state)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(200);
+	while (!(cx24123_readreg(state, 0x29) & 0x40)) {
+		if(time_after(jiffies, timeout)) {
+			printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__);
+			break;
+		}
+		msleep(10);
+	}
+}
+
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
 {
-	/* fixme: Implement diseqc */
-	printk("%s: No support yet\n",__FUNCTION__);
+	struct cx24123_state *state = fe->demodulator_priv;
+	int i, val;
+
+	dprintk("%s:\n",__FUNCTION__);
+
+	/* check if continuous tone has been stopped */
+	if (state->config->use_isl6421)
+		val = cx24123_readlnbreg(state, 0x00) & 0x10;
+	else
+		val = cx24123_readreg(state, 0x29) & 0x10;
 
-	return -ENOTSUPP;
+
+	if (val) {
+		printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+		return -ENOTSUPP;
+	}
+
+	/* wait for diseqc queue ready */
+	cx24123_wait_for_diseqc(state);
+
+	/* select tone mode */
+	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xf8);
+
+	for (i = 0; i < cmd->msg_len; i++)
+		cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
+
+	val = cx24123_readreg(state, 0x29);
+	cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
+
+	/* wait for diseqc message to finish sending */
+	cx24123_wait_for_diseqc(state);
+
+	return 0;
+}
+
+static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	int val;
+
+	dprintk("%s:\n", __FUNCTION__);
+
+	/* check if continuous tone has been stoped */
+	if (state->config->use_isl6421)
+		val = cx24123_readlnbreg(state, 0x00) & 0x10;
+	else
+		val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+	if (val) {
+		printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+		return -ENOTSUPP;
+	}
+
+	cx24123_wait_for_diseqc(state);
+
+	/* select tone mode */
+	val = cx24123_readreg(state, 0x2a) & 0xf8;
+	cx24123_writereg(state, 0x2a, val | 0x04);
+
+	val = cx24123_readreg(state, 0x29);
+
+	if (burst == SEC_MINI_A)
+		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
+	else if (burst == SEC_MINI_B)
+		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
+	else
+		return -EINVAL;
+
+	cx24123_wait_for_diseqc(state);
+
+	return 0;
 }
 
 static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
@@ -642,13 +848,15 @@ static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
 
 	*status = 0;
 	if (lock & 0x01)
-		*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+		*status |= FE_HAS_SIGNAL;
+	if (sync & 0x02)
+		*status |= FE_HAS_CARRIER;
 	if (sync & 0x04)
 		*status |= FE_HAS_VITERBI;
 	if (sync & 0x08)
-		*status |= FE_HAS_CARRIER;
+		*status |= FE_HAS_SYNC;
 	if (sync & 0x80)
-		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+		*status |= FE_HAS_LOCK;
 
 	return 0;
 }
@@ -681,6 +889,8 @@ static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber)
 	else
 		state->snr = 0;
 
+	dprintk("%s:  BER = %d, S/N index = %d\n",__FUNCTION__,state->lastber, state->snr);
+
 	*ber = state->lastber;
 
 	return 0;
@@ -691,6 +901,8 @@ static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_str
 	struct cx24123_state *state = fe->demodulator_priv;
 	*signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
 
+	dprintk("%s:  Signal strength = %d\n",__FUNCTION__,*signal_strength);
+
 	return 0;
 }
 
@@ -699,6 +911,8 @@ static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr)
 	struct cx24123_state *state = fe->demodulator_priv;
 	*snr = state->snr;
 
+	dprintk("%s:  read S/N index = %d\n",__FUNCTION__,*snr);
+
 	return 0;
 }
 
@@ -707,6 +921,8 @@ static int cx24123_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 	struct cx24123_state *state = fe->demodulator_priv;
 	*ucblocks = state->lastber;
 
+	dprintk("%s:  ucblocks (ber) = %d\n",__FUNCTION__,*ucblocks);
+
 	return 0;
 }
 
@@ -714,6 +930,8 @@ static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 {
 	struct cx24123_state *state = fe->demodulator_priv;
 
+	dprintk("%s:  set_frontend\n",__FUNCTION__);
+
 	if (state->config->set_ts_params)
 		state->config->set_ts_params(fe, 0);
 
@@ -737,6 +955,8 @@ static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 {
 	struct cx24123_state *state = fe->demodulator_priv;
 
+	dprintk("%s:  get_frontend\n",__FUNCTION__);
+
 	if (cx24123_get_inversion(state, &p->inversion) != 0) {
 		printk("%s: Failed to get inversion status\n",__FUNCTION__);
 		return -EREMOTEIO;
@@ -763,8 +983,10 @@ static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 
 		switch (tone) {
 		case SEC_TONE_ON:
+			dprintk("%s:  isl6421 sec tone on\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val | 0x10);
 		case SEC_TONE_OFF:
+			dprintk("%s:  isl6421 sec tone off\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x2f);
 		default:
 			printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
@@ -855,12 +1077,13 @@ static struct dvb_frontend_ops cx24123_ops = {
 		.frequency_min = 950000,
 		.frequency_max = 2150000,
 		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
-		.frequency_tolerance = 29500,
+		.frequency_tolerance = 5000,
 		.symbol_rate_min = 1000000,
 		.symbol_rate_max = 45000000,
 		.caps = FE_CAN_INVERSION_AUTO |
 			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
 			FE_CAN_QPSK | FE_CAN_RECOVER
 	},
 
@@ -875,12 +1098,16 @@ static struct dvb_frontend_ops cx24123_ops = {
 	.read_snr = cx24123_read_snr,
 	.read_ucblocks = cx24123_read_ucblocks,
 	.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+	.diseqc_send_burst = cx24123_diseqc_send_burst,
 	.set_tone = cx24123_set_tone,
 	.set_voltage = cx24123_set_voltage,
 };
 
 module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+module_param(force_band, int, 0644);
+MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off).");
 
 MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
 MODULE_AUTHOR("Steven Toth");
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index b6e2c387a04..791706ec1da 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -235,8 +235,8 @@ struct dvb_pll_desc dvb_pll_tdvs_tua6034 = {
 	.max   = 863000000,
 	.count = 3,
 	.entries = {
-		{  160000000, 44000000, 62500, 0xce, 0x01 },
-		{  455000000, 44000000, 62500, 0xce, 0x02 },
+		{  165000000, 44000000, 62500, 0xce, 0x01 },
+		{  450000000, 44000000, 62500, 0xce, 0x02 },
 		{  999999999, 44000000, 62500, 0xce, 0x04 },
 	},
 };
diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig
index 84f8f9f5286..7d8e6e87bdb 100644
--- a/drivers/media/dvb/pluto2/Kconfig
+++ b/drivers/media/dvb/pluto2/Kconfig
@@ -1,7 +1,6 @@
 config DVB_PLUTO2
 	tristate "Pluto2 cards"
-	depends on DVB_CORE && PCI
-	select I2C
+	depends on DVB_CORE && PCI && I2C
 	select I2C_ALGOBIT
 	select DVB_TDA1004X
 	help
diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile
index 86ca84b2be6..ce6a9aaf937 100644
--- a/drivers/media/dvb/pluto2/Makefile
+++ b/drivers/media/dvb/pluto2/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_DVB_PLUTO2) = pluto2.o
+obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 5b2aadb8385..b5ac7dfde52 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,8 +1,7 @@
 config DVB_AV7110
 	tristate "AV7110 cards"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select FW_LOADER
-	select VIDEO_DEV
 	select VIDEO_SAA7146_VV
 	select DVB_VES1820
 	select DVB_VES1X93
@@ -59,7 +58,7 @@ config DVB_AV7110_OSD
 
 config DVB_BUDGET
 	tristate "Budget cards"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
 	select DVB_STV0299
 	select DVB_VES1X93
@@ -80,7 +79,7 @@ config DVB_BUDGET
 
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
 	select DVB_STV0297
 	select DVB_STV0299
@@ -100,8 +99,7 @@ config DVB_BUDGET_CI
 
 config DVB_BUDGET_AV
 	tristate "Budget cards with analog video inputs"
-	depends on DVB_CORE && PCI
-	select VIDEO_DEV
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
 	select DVB_STV0299
 	select DVB_TDA1004X
@@ -119,7 +117,7 @@ config DVB_BUDGET_AV
 
 config DVB_BUDGET_PATCH
 	tristate "AV7110 cards with Budget Patch"
-	depends on DVB_CORE && DVB_BUDGET
+	depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
 	select DVB_AV7110
 	select DVB_STV0299
 	select DVB_VES1X93
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 8efe3ce5f66..8a7cd7d505c 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1190,8 +1190,6 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 						SAA7146_HPS_SYNC_PORT_A);
 
 		saa7113_setinput(budget_av, 0);
-	} else {
-		ciintf_init(budget_av);
 	}
 
 	/* fixme: find some sane values here... */
@@ -1211,6 +1209,10 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 	budget_av->budget.dvb_adapter.priv = budget_av;
 	frontend_init(budget_av);
 
+	if (!budget_av->has_saa7113) {
+		ciintf_init(budget_av);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 5f91036f5b8..e64a609cf4f 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -71,6 +71,7 @@ struct budget_ci {
 	struct tasklet_struct msp430_irq_tasklet;
 	struct tasklet_struct ciintf_irq_tasklet;
 	int slot_status;
+	int ci_irq;
 	struct dvb_ca_en50221 ca;
 	char ir_dev_name[50];
 	u8 tuner_pll_address; /* used for philips_tdm1316l configs */
@@ -276,8 +277,10 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	if (slot != 0)
 		return -EINVAL;
 
-	// trigger on RISING edge during reset so we know when READY is re-asserted
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	if (budget_ci->ci_irq) {
+		// trigger on RISING edge during reset so we know when READY is re-asserted
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	}
 	budget_ci->slot_status = SLOTSTATUS_RESET;
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
 	msleep(1);
@@ -370,11 +373,50 @@ static void ciintf_interrupt(unsigned long data)
 	}
 }
 
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+	unsigned int flags;
+
+	// ensure we don't get spurious IRQs during initialisation
+	if (!budget_ci->budget.ci_present)
+		return -EINVAL;
+
+	// read the CAM status
+	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+	if (flags & CICONTROL_CAMDETECT) {
+		// mark it as present if it wasn't before
+		if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+			budget_ci->slot_status = SLOTSTATUS_PRESENT;
+		}
+
+		// during a RESET, we check if we can read from IO memory to see when CAM is ready
+		if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+			if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+				budget_ci->slot_status = SLOTSTATUS_READY;
+			}
+		}
+	} else {
+		budget_ci->slot_status = SLOTSTATUS_NONE;
+	}
+
+	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+		if (budget_ci->slot_status & SLOTSTATUS_READY) {
+			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+		}
+		return DVB_CA_EN50221_POLL_CAM_PRESENT;
+	}
+
+	return 0;
+}
+
 static int ciintf_init(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
 	int flags;
 	int result;
+	int ci_version;
+	int ca_flags;
 
 	memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
 
@@ -382,16 +424,29 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
 
 	// test if it is there
-	if ((ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0) & 0xa0) != 0xa0) {
+	ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+	if ((ci_version & 0xa0) != 0xa0) {
 		result = -ENODEV;
 		goto error;
 	}
+
 	// determine whether a CAM is present or not
 	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
 	budget_ci->slot_status = SLOTSTATUS_NONE;
 	if (flags & CICONTROL_CAMDETECT)
 		budget_ci->slot_status = SLOTSTATUS_PRESENT;
 
+	// version 0xa2 of the CI firmware doesn't generate interrupts
+	if (ci_version == 0xa2) {
+		ca_flags = 0;
+		budget_ci->ci_irq = 0;
+	} else {
+		ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+				DVB_CA_EN50221_FLAG_IRQ_FR |
+				DVB_CA_EN50221_FLAG_IRQ_DA;
+		budget_ci->ci_irq = 1;
+	}
+
 	// register CI interface
 	budget_ci->ca.owner = THIS_MODULE;
 	budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
@@ -401,23 +456,27 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	budget_ci->ca.slot_reset = ciintf_slot_reset;
 	budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
 	budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+	budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
 	budget_ci->ca.data = budget_ci;
 	if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
 					  &budget_ci->ca,
-					  DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
-					  DVB_CA_EN50221_FLAG_IRQ_FR |
-					  DVB_CA_EN50221_FLAG_IRQ_DA, 1)) != 0) {
+					  ca_flags, 1)) != 0) {
 		printk("budget_ci: CI interface detected, but initialisation failed.\n");
 		goto error;
 	}
+
 	// Setup CI slot IRQ
-	tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
-	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
-	} else {
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	if (budget_ci->ci_irq) {
+		tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
+		if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+		} else {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+		}
+		saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
 	}
-	saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+
+	// enable interface
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
 			       CICONTROL_RESET, 1, 0);
 
@@ -426,10 +485,12 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	budget_ci->budget.ci_present = 1;
 
 	// forge a fake CI IRQ so the CAM state is setup correctly
-	flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
-	if (budget_ci->slot_status != SLOTSTATUS_NONE)
-		flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
-	dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+	if (budget_ci->ci_irq) {
+		flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+		if (budget_ci->slot_status != SLOTSTATUS_NONE)
+			flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+		dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+	}
 
 	return 0;
 
@@ -443,9 +504,13 @@ static void ciintf_deinit(struct budget_ci *budget_ci)
 	struct saa7146_dev *saa = budget_ci->budget.dev;
 
 	// disable CI interrupts
-	saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
-	tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+	if (budget_ci->ci_irq) {
+		saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+		tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+	}
+
+	// reset interface
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
 	msleep(1);
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
@@ -473,7 +538,7 @@ static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
 	if (*isr & MASK_10)
 		ttpci_budget_irq10_handler(dev, isr);
 
-	if ((*isr & MASK_03) && (budget_ci->budget.ci_present))
+	if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
 		tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
 }
 
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 248fdc7accf..6ceae38125c 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -1507,7 +1507,11 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	mutex_unlock(&ttusb->semi2c);
 
-	dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
+	if ((result = dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE)) < 0) {
+		ttusb_free_iso_urbs(ttusb);
+		kfree(ttusb);
+		return result;
+	}
 	ttusb->adapter.priv = ttusb;
 
 	/* i2c */
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d318be383de..3fff7576369 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@ menu "Radio Adapters"
 
 config RADIO_CADET
 	tristate "ADS Cadet AM/FM Tuner"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these AM/FM radio cards, and then
 	  fill in the port address below.
@@ -25,7 +25,7 @@ config RADIO_CADET
 
 config RADIO_RTRACK
 	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -59,7 +59,7 @@ config RADIO_RTRACK_PORT
 
 config RADIO_RTRACK2
 	tristate "AIMSlab RadioTrack II support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -82,7 +82,7 @@ config RADIO_RTRACK2_PORT
 
 config RADIO_AZTECH
 	tristate "Aztech/Packard Bell Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -106,7 +106,7 @@ config RADIO_AZTECH_PORT
 
 config RADIO_GEMTEK
 	tristate "GemTek Radio Card support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -131,7 +131,7 @@ config RADIO_GEMTEK_PORT
 
 config RADIO_GEMTEK_PCI
 	tristate "GemTek PCI Radio Card support"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this PCI FM radio card.
 
@@ -145,7 +145,7 @@ config RADIO_GEMTEK_PCI
 
 config RADIO_MAXIRADIO
 	tristate "Guillemot MAXI Radio FM 2000 radio"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this radio card.  This card may also be
 	  found as Gemtek PCI FM.
@@ -160,7 +160,7 @@ config RADIO_MAXIRADIO
 
 config RADIO_MAESTRO
 	tristate "Maestro on board radio"
-	depends on VIDEO_DEV
+	depends on VIDEO_V4L1
 	---help---
 	  Say Y here to directly support the on-board radio tuner on the
 	  Maestro 2 or 2E sound card.
@@ -175,7 +175,7 @@ config RADIO_MAESTRO
 
 config RADIO_MIROPCM20
 	tristate "miroSOUND PCM20 radio"
-	depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+	depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
 	---help---
 	  Choose Y here if you have this FM radio card. You also need to say Y
 	  to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +208,7 @@ config RADIO_MIROPCM20_RDS
 
 config RADIO_SF16FMI
 	tristate "SF16FMI Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.  If you
 	  compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +225,7 @@ config RADIO_SF16FMI
 
 config RADIO_SF16FMR2
 	tristate "SF16FMR2 Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.
 
@@ -239,7 +239,7 @@ config RADIO_SF16FMR2
 
 config RADIO_TERRATEC
 	tristate "TerraTec ActiveRadio ISA Standalone"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below. (TODO)
@@ -268,7 +268,7 @@ config RADIO_TERRATEC_PORT
 
 config RADIO_TRUST
 	tristate "Trust FM radio card"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	help
 	  This is a driver for the Trust FM radio cards. Say Y if you have
 	  such a card and want to use it under Linux.
@@ -286,7 +286,7 @@ config RADIO_TRUST_PORT
 
 config RADIO_TYPHOON
 	tristate "Typhoon Radio (a.k.a. EcoRadio)"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address and the frequency used for muting below.
@@ -330,7 +330,7 @@ config RADIO_TYPHOON_MUTEFREQ
 
 config RADIO_ZOLTRIX
 	tristate "Zoltrix Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 85888a8a93c..6b419701856 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -2,10 +2,10 @@
 # Multimedia Video device configuration
 #
 
-menu "Video For Linux"
+menu "Video Capture Adapters"
 	depends on VIDEO_DEV
 
-comment "Video Adapters"
+comment "Video Capture Adapters"
 
 config VIDEO_ADV_DEBUG
 	bool "Enable advanced debug functionality"
@@ -16,11 +16,23 @@ config VIDEO_ADV_DEBUG
 	  V4L devices.
 	  In doubt, say N.
 
+config VIDEO_VIVI
+	tristate "Virtual Video Driver"
+	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+	select VIDEO_BUF
+	default n
+	---help---
+	  Enables a virtual video driver. This device shows a color bar
+	  and a timestamp, as a real device would generate by using V4L2
+	  api.
+	  Say Y here if you want to test video apps or debug V4L devices.
+	  In doubt, say N.
+
 source "drivers/media/video/bt8xx/Kconfig"
 
 config VIDEO_SAA6588
 	tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
-	depends on VIDEO_DEV && I2C && VIDEO_BT848
+	depends on I2C && VIDEO_BT848
 
 	help
 	  Support for  Radio Data System (RDS) decoder. This allows seeing
@@ -32,7 +44,7 @@ config VIDEO_SAA6588
 
 config VIDEO_PMS
 	tristate "Mediavision Pro Movie Studio Video For Linux"
-	depends on VIDEO_DEV && ISA
+	depends on ISA && VIDEO_V4L1
 	help
 	  Say Y if you have such a thing.
 
@@ -41,7 +53,7 @@ config VIDEO_PMS
 
 config VIDEO_PLANB
 	tristate "PlanB Video-In on PowerMac"
-	depends on PPC_PMAC && VIDEO_DEV && BROKEN
+	depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
 	help
 	  PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
 	  input hardware. If you want to experiment with this, say Y.
@@ -52,7 +64,7 @@ config VIDEO_PLANB
 
 config VIDEO_BWQCAM
 	tristate "Quickcam BW Video For Linux"
-	depends on VIDEO_DEV && PARPORT
+	depends on PARPORT && VIDEO_V4L1
 	help
 	  Say Y have if you the black and white version of the QuickCam
 	  camera. See the next option for the color version.
@@ -62,7 +74,7 @@ config VIDEO_BWQCAM
 
 config VIDEO_CQCAM
 	tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+	depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
 	help
 	  This is the video4linux driver for the colour version of the
 	  Connectix QuickCam.  If you have one of these cameras, say Y here,
@@ -73,7 +85,7 @@ config VIDEO_CQCAM
 
 config VIDEO_W9966
 	tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
-	depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+	depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
 	help
 	  Video4linux driver for Winbond's w9966 based Webcams.
 	  Currently tested with the LifeView FlyCam Supra.
@@ -86,7 +98,7 @@ config VIDEO_W9966
 
 config VIDEO_CPIA
 	tristate "CPiA Video For Linux"
-	depends on VIDEO_DEV
+	depends on VIDEO_V4L1
 	---help---
 	  This is the video4linux driver for cameras based on Vision's CPiA
 	  (Colour Processor Interface ASIC), such as the Creative Labs Video
@@ -123,7 +135,7 @@ source "drivers/media/video/cpia2/Kconfig"
 
 config VIDEO_SAA5246A
 	tristate "SAA5246A, SAA5281 Teletext processor"
-	depends on VIDEO_DEV && I2C
+	depends on I2C && VIDEO_V4L1
 	help
 	  Support for I2C bus based teletext using the SAA5246A or SAA5281
 	  chip. Useful only if you live in Europe.
@@ -150,7 +162,7 @@ config TUNER_3036
 
 config VIDEO_VINO
 	tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
-	depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+	depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
 	select I2C_ALGO_SGI
 	help
 	  Say Y here to build in support for the Vino video input system found
@@ -158,7 +170,7 @@ config VIDEO_VINO
 
 config VIDEO_STRADIS
 	tristate "Stradis 4:2:2 MPEG-2 video driver  (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIDEO_DEV && PCI
+	depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
 	help
 	  Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
 	  driver for PCI.  There is a product page at
@@ -166,7 +178,7 @@ config VIDEO_STRADIS
 
 config VIDEO_ZORAN
 	tristate "Zoran ZR36057/36067 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+	depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
 	help
 	  Say Y for support for MJPEG capture cards based on the Zoran
 	  36057/36067 PCI controller chipset. This includes the Iomega
@@ -214,7 +226,7 @@ config VIDEO_ZORAN_LML33R10
 
 config VIDEO_ZR36120
 	tristate "Zoran ZR36120/36125 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C && BROKEN
+	depends on PCI && I2C && VIDEO_V4L1 && BROKEN
 	help
 	  Support for ZR36120/ZR36125 based frame grabber/overlay boards.
 	  This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
@@ -226,7 +238,7 @@ config VIDEO_ZR36120
 
 config VIDEO_MEYE
 	tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
-	depends on VIDEO_DEV && PCI && SONYPI
+	depends on PCI && SONYPI && VIDEO_V4L1
 	---help---
 	  This is the video4linux driver for the Motion Eye camera found
 	  in the Vaio Picturebook laptops. Please read the material in
@@ -242,7 +254,7 @@ source "drivers/media/video/saa7134/Kconfig"
 
 config VIDEO_MXB
 	tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
 	select VIDEO_TUNER
 	---help---
@@ -254,8 +266,9 @@ config VIDEO_MXB
 
 config VIDEO_DPC
 	tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the 'dpc7146 demonstration
 	  board' by Philips-Semiconductors. It's the reference design
@@ -268,8 +281,9 @@ config VIDEO_DPC
 
 config VIDEO_HEXIUM_ORION
 	tristate "Hexium HV-PCI6 and Orion frame grabber"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the Hexium HV-PCI6 and
 	  Orion frame grabber cards by Hexium.
@@ -279,8 +293,9 @@ config VIDEO_HEXIUM_ORION
 
 config VIDEO_HEXIUM_GEMINI
 	tristate "Hexium Gemini frame grabber"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the Hexium Gemini frame
 	  grabber card by Hexium. Please note that the Gemini Dual
@@ -293,7 +308,7 @@ source "drivers/media/video/cx88/Kconfig"
 
 config VIDEO_OVCAMCHIP
 	tristate "OmniVision Camera Chip support"
-	depends on VIDEO_DEV && I2C
+	depends on I2C && VIDEO_V4L1
 	---help---
 	  Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
 	  This driver is intended to be used with the ov511 and w9968cf USB
@@ -304,7 +319,7 @@ config VIDEO_OVCAMCHIP
 
 config VIDEO_M32R_AR
 	tristate "AR devices"
-	depends on M32R
+	depends on M32R && VIDEO_V4L1
 	---help---
 	  This is a video4linux driver for the Renesas AR (Artificial Retina)
 	  camera module.
@@ -365,17 +380,17 @@ config VIDEO_WM8739
 source "drivers/media/video/cx25840/Kconfig"
 
 config VIDEO_SAA711X
-	tristate "Philips SAA7113/4/5 video decoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	tristate "Philips SAA7113/4/5 video decoders (OBSOLETED)"
+	depends on VIDEO_V4L1 && I2C && EXPERIMENTAL
 	---help---
-	  Support for the Philips SAA7113/4/5 video decoders.
+	  Old support for the Philips SAA7113/4 video decoders.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa7115.
 
 config VIDEO_SAA7127
 	tristate "Philips SAA7127/9 digital video encoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the Philips SAA7127/9 digital video encoders.
 
@@ -384,7 +399,7 @@ config VIDEO_SAA7127
 
 config VIDEO_UPD64031A
 	tristate "NEC Electronics uPD64031A Ghost Reduction"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the NEC Electronics uPD64031A Ghost Reduction
 	  video chip. It is most often found in NTSC TV cards made for
@@ -396,7 +411,7 @@ config VIDEO_UPD64031A
 
 config VIDEO_UPD64083
 	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 	  separation video chip. It is used to improve the quality of
@@ -418,7 +433,7 @@ source "drivers/media/video/em28xx/Kconfig"
 
 config USB_DSBR
 	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
-	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
 	---help---
 	  Say Y here if you want to connect this type of radio to your
 	  computer's USB port. Note that the audio is not digital, and
@@ -434,7 +449,7 @@ source "drivers/media/video/et61x251/Kconfig"
 
 config USB_OV511
 	tristate "USB OV511 Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -445,7 +460,7 @@ config USB_OV511
 
 config USB_SE401
 	tristate "USB SE401 Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -458,7 +473,7 @@ source "drivers/media/video/sn9c102/Kconfig"
 
 config USB_STV680
 	tristate "USB STV680 (Pencam) Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. This includes the Pencam line of cameras.
@@ -470,7 +485,7 @@ config USB_STV680
 
 config USB_W9968CF
 	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
-	depends on USB && VIDEO_DEV && I2C
+	depends on USB && VIDEO_V4L1 && I2C
 	select VIDEO_OVCAMCHIP
 	---help---
 	  Say Y here if you want support for cameras based on OV681 or
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index b3ea2d63db9..e5bf2687b76 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,7 +10,11 @@ tuner-objs	:=	tuner-core.o tuner-types.o tuner-simple.o \
 
 msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
-obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
+
+ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
+  obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
+endif
 
 obj-$(CONFIG_VIDEO_BT848) += bt8xx/
 obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
@@ -84,4 +88,8 @@ obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
 obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
 
+obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+extra-cflags-$(CONFIG_VIDEO_V4L1_COMPAT) += -DCONFIG_VIDEO_V4L1_COMPAT
+
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 085477c1261..153f6a4a96c 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_BT848
 	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C
+	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX
diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile
index db641a36b19..a096a03418a 100644
--- a/drivers/media/video/bt8xx/Makefile
+++ b/drivers/media/video/bt8xx/Makefile
@@ -8,5 +8,5 @@ bttv-objs      :=      bttv-driver.o bttv-cards.o bttv-if.o \
 
 obj-$(CONFIG_VIDEO_BT848) += bttv.o
 
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/media/video
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f209a749205..2b64aa835b4 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2991,13 +2991,13 @@ void __devinit bttv_idcard(struct bttv *btv)
 
 	if (UNSET != audiomux[0]) {
 		gpiobits = 0;
-		for (i = 0; i < 5; i++) {
+		for (i = 0; i < 4; i++) {
 			bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
 			gpiobits |= audiomux[i];
 		}
 	} else {
 		gpiobits = audioall;
-		for (i = 0; i < 5; i++) {
+		for (i = 0; i < 4; i++) {
 			bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
 		}
 	}
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 16323a5d68a..afcfe71e379 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -233,7 +233,7 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 		  const struct bttv_format *fmt, struct bttv_overlay *ov,
 		  int skip_even, int skip_odd)
 {
-	int instructions,rc,line,maxy,start,end,skip,nskips;
+	int dwords,rc,line,maxy,start,end,skip,nskips;
 	struct btcx_skiplist *skips;
 	u32 *rp,ri,ra;
 	u32 addr;
@@ -242,12 +242,12 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 	if (NULL == (skips = kmalloc(sizeof(*skips) * ov->nclips,GFP_KERNEL)))
 		return -ENOMEM;
 
-	/* estimate risc mem: worst case is (clip+1) * lines instructions
+	/* estimate risc mem: worst case is (1.5*clip+1) * lines instructions
 	   + sync + jump (all 2 dwords) */
-	instructions  = (ov->nclips + 1) *
-		((skip_even || skip_odd) ? ov->w.height>>1 :  ov->w.height);
-	instructions += 2;
-	if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions*8)) < 0) {
+	dwords  = (3 * ov->nclips + 2) *
+		((skip_even || skip_odd) ? (ov->w.height+1)>>1 :  ov->w.height);
+	dwords += 4;
+	if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,dwords*4)) < 0) {
 		kfree(skips);
 		return rc;
 	}
@@ -276,8 +276,6 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 		if (line > maxy)
 			btcx_calc_skips(line, ov->w.width, &maxy,
 					skips, &nskips, ov->clips, ov->nclips);
-		else
-			nskips = 0;
 
 		/* write out risc code */
 		for (start = 0, skip = 0; start < ov->w.width; start = end) {
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
index f59ced181c5..1958d4016ea 100644
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -39,29 +39,12 @@
 
 #define FWDEV(x) &((x)->adapter->dev)
 
-static int fastfw = 1;
 static char *firmware = FWFILE;
 
-module_param(fastfw, bool, 0444);
 module_param(firmware, charp, 0444);
 
-MODULE_PARM_DESC(fastfw, "Load firmware fast [0=100MHz 1=333MHz (default)]");
 MODULE_PARM_DESC(firmware, "Firmware image [default: " FWFILE "]");
 
-static void set_i2c_delay(struct i2c_client *client, int delay)
-{
-	struct i2c_algo_bit_data *algod = client->adapter->algo_data;
-
-	/* We aren't guaranteed to be using algo_bit,
-	 * so avoid the null pointer dereference
-	 * and disable the 'fast firmware load' */
-	if (algod) {
-		algod->udelay = delay;
-	} else {
-		fastfw = 0;
-	}
-}
-
 static void start_fw_load(struct i2c_client *client)
 {
 	/* DL_ADDR_LB=0 DL_ADDR_HB=0 */
@@ -71,16 +54,10 @@ static void start_fw_load(struct i2c_client *client)
 	cx25840_write(client, 0x803, 0x0b);
 	/* AUTO_INC_DIS=1 */
 	cx25840_write(client, 0x000, 0x20);
-
-	if (fastfw)
-		set_i2c_delay(client, 3);
 }
 
 static void end_fw_load(struct i2c_client *client)
 {
-	if (fastfw)
-		set_i2c_delay(client, 10);
-
 	/* AUTO_INC_DIS=0 */
 	cx25840_write(client, 0x000, 0x00);
 	/* DL_ENABLE=0 */
@@ -107,30 +84,8 @@ static int fw_write(struct i2c_client *client, u8 * data, int size)
 	int sent;
 
 	if ((sent = i2c_master_send(client, data, size)) < size) {
-
-		if (fastfw) {
-			v4l_err(client, "333MHz i2c firmware load failed\n");
-			fastfw = 0;
-			set_i2c_delay(client, 10);
-
-			if (sent > 2) {
-				u16 dl_addr = cx25840_read(client, 0x801) << 8;
-				dl_addr |= cx25840_read(client, 0x800);
-				dl_addr -= sent - 2;
-				cx25840_write(client, 0x801, dl_addr >> 8);
-				cx25840_write(client, 0x800, dl_addr & 0xff);
-			}
-
-			if (i2c_master_send(client, data, size) < size) {
-				v4l_err(client, "100MHz i2c firmware load failed\n");
-				return -ENOSYS;
-			}
-
-		} else {
-			v4l_err(client, "firmware load i2c failure\n");
-			return -ENOSYS;
-		}
-
+		v4l_err(client, "firmware load i2c failure\n");
+		return -ENOSYS;
 	}
 
 	return 0;
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index f9d87b86492..320b3d9384b 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -616,7 +616,7 @@ static struct snd_kcontrol_new snd_cx88_capture_volume = {
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-static struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] __devinitdata = {
 	{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0, }
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index c7042cf4123..f80154b87d2 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -564,7 +564,7 @@ struct cx88_board cx88_boards[] = {
 	},
 	[CX88_BOARD_PCHDTV_HD3000] = {
 		.name           = "pcHDTV HD3000 HDTV",
-		.tuner_type     = TUNER_THOMSON_DTT7610,
+		.tuner_type     = TUNER_THOMSON_DTT761X,
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 2c3d9f1999b..e1092d5d462 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -146,9 +146,11 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
 		fields++;
 
 	/* estimate risc mem: worst case is one write per page border +
-	   one write per scan line + syncs + jump (all 2 dwords) */
-	instructions  = (bpl * lines * fields) / PAGE_SIZE + lines * fields;
-	instructions += 3 + 4;
+	   one write per scan line + syncs + jump (all 2 dwords).  Padding
+	   can cause next bpl to start close to a page border.  First DMA
+	   region may be smaller than PAGE_SIZE */
+	instructions  = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
+	instructions += 2;
 	if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 		return rc;
 
@@ -176,9 +178,11 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
 	int rc;
 
 	/* estimate risc mem: worst case is one write per page border +
-	   one write per scan line + syncs + jump (all 2 dwords) */
-	instructions  = (bpl * lines) / PAGE_SIZE + lines;
-	instructions += 3 + 4;
+	   one write per scan line + syncs + jump (all 2 dwords).  Here
+	   there is no padding and no sync.  First DMA region may be smaller
+	   than PAGE_SIZE */
+	instructions  = 1 + (bpl * lines) / PAGE_SIZE + lines;
+	instructions += 1;
 	if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 		return rc;
 
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index f0ea9b5cdbc..3619a449aef 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -372,7 +372,7 @@ static int or51132_set_ts_param(struct dvb_frontend* fe,
 static struct or51132_config pchdtv_hd3000 = {
 	.demod_address    = 0x15,
 	.pll_address      = 0x61,
-	.pll_desc         = &dvb_pll_thomson_dtt7610,
+	.pll_desc         = &dvb_pll_thomson_dtt761x,
 	.set_ts_params    = or51132_set_ts_param,
 };
 #endif
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 72a417b3174..694d1d80ff3 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -35,8 +35,10 @@
 #include "cx88.h"
 #include <media/v4l2-common.h>
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
 #include <linux/videodev.h>
+#endif
 
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5a793ae7cc2..dfb15bfb83d 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_EM28XX
 	tristate "Empia EM2800/2820/2840 USB video capture support"
-	depends on VIDEO_DEV && USB && I2C
+	depends on VIDEO_V4L1 && USB && I2C
 	select VIDEO_BUF
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index ddc92cbb527..cf7cdf9ef61 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1576,8 +1576,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	errCode = em28xx_config(dev);
 	if (errCode) {
 		em28xx_errdev("error configuring device\n");
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1603,8 +1603,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	dev->vdev = video_device_alloc();
 	if (NULL == dev->vdev) {
 		em28xx_errdev("cannot allocate video_device.\n");
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1612,8 +1612,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	if (NULL == dev->vbi_dev) {
 		em28xx_errdev("cannot allocate video_device.\n");
 		kfree(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1650,8 +1650,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		mutex_unlock(&dev->lock);
 		list_del(&dev->devlist);
 		video_device_release(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENODEV;
 	}
 
@@ -1662,8 +1662,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		list_del(&dev->devlist);
 		video_device_release(dev->vbi_dev);
 		video_device_release(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENODEV;
 	} else {
 		printk("registered VBI\n");
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index 6c43a90c656..c6bff705688 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,6 +1,6 @@
 config USB_ET61X251
 	tristate "USB ET61X[12]51 PC Camera Controller support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on Etoms ET61X151
 	  or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 86376556f10..53cbc950f95 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,6 @@
 config USB_PWC
 	tristate "USB Philips Cameras"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y or M here if you want to use one of these Philips & OEM
 	  webcams:
diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile
index 8326684f49f..33d60126c02 100644
--- a/drivers/media/video/pwc/Makefile
+++ b/drivers/media/video/pwc/Makefile
@@ -1,20 +1,3 @@
-ifneq ($(KERNELRELEASE),)
-
 pwc-objs	:= pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o
 
 obj-$(CONFIG_USB_PWC) += pwc.o
-
-else
-
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default:
-	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-
-endif
-
-clean:
-	rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
-	rm -rf .tmp_versions
-
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 133f9e5252f..c271e2e1410 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -142,6 +142,7 @@ struct i2c_reg_value {
 static const struct i2c_reg_value saa7129_init_config_extra[] = {
 	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x38 },
 	{ SAA7127_REG_VTRIG, 				0xfa },
+	{ 0, 0 }
 };
 
 static const struct i2c_reg_value saa7127_init_config_common[] = {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index e666a4465ca..86eae352833 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3504,6 +3504,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+		break;
 	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
 		/* this turns the remote control chip off to work around a bug in it */
 		saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 13de05532e0..f0c2111f14a 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -548,6 +548,8 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 		if (report & SAA7134_IRQ_REPORT_GPIO16) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if  (dev->remote->mask_keydown & 0x10000) {
 						saa7134_input_irq(dev);
 					}
@@ -564,6 +566,8 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 		if (report & SAA7134_IRQ_REPORT_GPIO18) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if ((dev->remote->mask_keydown & 0x40000) ||
 					    (dev->remote->mask_keyup & 0x40000)) {
 						saa7134_input_irq(dev);
@@ -676,7 +680,7 @@ static int saa7134_hwinit2(struct saa7134_dev *dev)
 		SAA7134_IRQ2_INTE_PE      |
 		SAA7134_IRQ2_INTE_AR;
 
-	if (dev->has_remote == SAA7134_REMOTE_GPIO) {
+	if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
 		if (dev->remote->mask_keydown & 0x10000)
 			irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
 		else if (dev->remote->mask_keydown & 0x40000)
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index aeef80f88a6..e4156ec9c6d 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -31,8 +31,10 @@
 #include "saa7134.h"
 #include <media/v4l2-common.h>
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
 #include <linux/videodev.h>
+#endif
 
 /* ------------------------------------------------------------------ */
 
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index 55f2bc11964..cf552e6b8ec 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,6 +1,6 @@
 config USB_SN9C102
 	tristate "USB SN9C10x PC Camera Controller support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on SONiX SN9C101,
 	  SN9C102 or SN9C103 PC Camera Controllers.
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index 72e0f01db56..a1ae036b44e 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -877,8 +877,8 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = {
 /* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */
 
 static struct tuner_range tuner_tua6034_ntsc_ranges[] = {
-	{ 16 * 160.00 /*MHz*/, 0x8e, 0x01 },
-	{ 16 * 455.00 /*MHz*/, 0x8e, 0x02 },
+	{ 16 * 165.00 /*MHz*/, 0x8e, 0x01 },
+	{ 16 * 450.00 /*MHz*/, 0x8e, 0x02 },
 	{ 16 * 999.99        , 0x8e, 0x04 },
 };
 
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 431c3e2f6c4..b463e996961 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -218,7 +218,7 @@ hauppauge_tuner[] =
 	/* 110-119 */
 	{ TUNER_ABSENT,        "Thompson DTT75105"},
 	{ TUNER_ABSENT,        "Conexant_CX24109"},
-	{ TUNER_ABSENT,        "TCL M2523_5N_E"},
+	{ TUNER_TCL_2002N,     "TCL M2523_5N_E"},
 	{ TUNER_ABSENT,        "TCL M2523_3DB_E"},
 	{ TUNER_ABSENT,        "Philips 8275A"},
 	{ TUNER_ABSENT,        "Microtune MT2060"},
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index 08a5d20bb2c..39269a2c563 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_USBVIDEO
 
 config USB_VICAM
 	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
-	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@ config USB_VICAM
 
 config USB_IBMCAM
 	tristate "USB IBM (Xirlink) C-it Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@ config USB_IBMCAM
 
 config USB_KONICAWC
 	tristate "USB Konica Webcam support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want support for webcams based on a Konica
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 5e813404d06..779db26771c 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -26,6 +26,11 @@
 #include <linux/random.h>
 #include <linux/version.h>
 #include <linux/videodev2.h>
+#include <linux/dma-mapping.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+/* Include V4L1 specific functions. Should be removed soon */
+#include <linux/videodev.h>
+#endif
 #include <linux/interrupt.h>
 #include <media/video-buf.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index c3bf886b80c..115833e4f4d 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,6 +1,6 @@
 config USB_ZC0301
 	tristate "USB ZC0301 Image Processor and Control Chip support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on the ZC0301
 	  Image Processor and Control Chip.
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index bb7ad4d0678..164375eea89 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1189,7 +1189,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->diagPending = 0;
 	spin_lock_init(&ioc->diagLock);
 	spin_lock_init(&ioc->fc_rescan_work_lock);
-	spin_lock_init(&ioc->fc_rport_lock);
 	spin_lock_init(&ioc->initializing_hba_lock);
 
 	/* Initialize the event logging.
@@ -1569,6 +1568,21 @@ mpt_resume(struct pci_dev *pdev)
 }
 #endif
 
+static int
+mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase)
+{
+	if ((MptDriverClass[index] == MPTSPI_DRIVER &&
+	     ioc->bus_type != SPI) ||
+	    (MptDriverClass[index] == MPTFC_DRIVER &&
+	     ioc->bus_type != FC) ||
+	    (MptDriverClass[index] == MPTSAS_DRIVER &&
+	     ioc->bus_type != SAS))
+		/* make sure we only call the relevant reset handler
+		 * for the bus */
+		return 0;
+	return (MptResetHandlers[index])(ioc, reset_phase);
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *	mpt_do_ioc_recovery - Initialize or recover MPT adapter.
@@ -1892,14 +1906,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			if ((ret == 0) && MptResetHandlers[ii]) {
 				dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
 						ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}
 
 			if (alt_ioc_ready && MptResetHandlers[ii]) {
 				drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
 						ioc->name, ioc->alt_ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}
 		}
@@ -3280,11 +3294,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				if (MptResetHandlers[ii]) {
 					dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
 							ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
+					r += mpt_signal_reset(ii, ioc, MPT_IOC_PRE_RESET);
 					if (ioc->alt_ioc) {
 						dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
 								ioc->name, ioc->alt_ioc->name, ii));
-						r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
+						r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_PRE_RESET);
 					}
 				}
 			}
@@ -5719,11 +5733,11 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 			if (MptResetHandlers[ii]) {
 				dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
 						ioc->name, ii));
-				r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
+				r += mpt_signal_reset(ii, ioc, MPT_IOC_SETUP_RESET);
 				if (ioc->alt_ioc) {
 					dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
 							ioc->name, ioc->alt_ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
+					r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
 				}
 			}
 		}
@@ -5748,11 +5762,13 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	return rc;
 }
 
+# define EVENT_DESCR_STR_SZ		100
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 static void
 EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 {
-	char *ds;
+	char *ds = NULL;
 
 	switch(event) {
 	case MPI_EVENT_NONE:
@@ -5789,9 +5805,9 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
 			ds = "Loop State(LIP) Change";
 		else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
-			ds = "Loop State(LPE) Change";			/* ??? */
+			ds = "Loop State(LPE) Change";		/* ??? */
 		else
-			ds = "Loop State(LPB) Change";			/* ??? */
+			ds = "Loop State(LPB) Change";		/* ??? */
 		break;
 	case MPI_EVENT_LOGOUT:
 		ds = "Logout";
@@ -5853,27 +5869,32 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		break;
 	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
 	{
-		char buf[50];
 		u8 id = (u8)(evData0);
 		u8 ReasonCode = (u8)(evData0 >> 16);
 		switch (ReasonCode) {
 		case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
-			sprintf(buf,"SAS Device Status Change: Added: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: Added: id=%d", id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-			sprintf(buf,"SAS Device Status Change: Deleted: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: Deleted: id=%d", id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-			sprintf(buf,"SAS Device Status Change: SMART Data: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: SMART Data: id=%d",
+			    id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
-			sprintf(buf,"SAS Device Status Change: No Persistancy Added: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: No Persistancy "
+			    "Added: id=%d", id);
 			break;
 		default:
-			sprintf(buf,"SAS Device Status Change: Unknown: id=%d", id);
-		break;
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: Unknown: id=%d", id);
+			break;
 		}
-		ds = buf;
 		break;
 	}
 	case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
@@ -5890,41 +5911,46 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		break;
 	case MPI_EVENT_SAS_PHY_LINK_STATUS:
 	{
-		char buf[50];
 		u8 LinkRates = (u8)(evData0 >> 8);
 		u8 PhyNumber = (u8)(evData0);
 		LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
 			MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
 		switch (LinkRates) {
 		case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Rate Unknown",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Phy Disabled",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Failed Speed Nego",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Sata OOB Completed",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Rate 1.5 Gbps",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Rate 3.0 Gpbs",PhyNumber);
 			break;
 		default:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d", PhyNumber);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d", PhyNumber);
 			break;
 		}
-		ds = buf;
 		break;
 	}
 	case MPI_EVENT_SAS_DISCOVERY_ERROR:
@@ -5933,9 +5959,8 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	case MPI_EVENT_IR_RESYNC_UPDATE:
 	{
 		u8 resync_complete = (u8)(evData0 >> 16);
-		char buf[40];
-		sprintf(buf,"IR Resync Update: Complete = %d:",resync_complete);
-		ds = buf;
+		snprintf(evStr, EVENT_DESCR_STR_SZ,
+		    "IR Resync Update: Complete = %d:",resync_complete);
 		break;
 	}
 	case MPI_EVENT_IR2:
@@ -5988,7 +6013,8 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		ds = "Unknown";
 		break;
 	}
-	strcpy(evStr,ds);
+	if (ds)
+		strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -6010,7 +6036,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	int ii;
 	int r = 0;
 	int handlers = 0;
-	char evStr[100];
+	char evStr[EVENT_DESCR_STR_SZ];
 	u8 event;
 
 	/*
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index be7e8501b53..f673cca507e 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2005 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.03.08"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.03.08"
+#define MPT_LINUX_VERSION_COMMON	"3.03.09"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.03.09"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -489,7 +489,6 @@ typedef	struct _RaidCfgData {
 
 #define MPT_RPORT_INFO_FLAGS_REGISTERED	0x01	/* rport registered */
 #define MPT_RPORT_INFO_FLAGS_MISSING	0x02	/* missing from DevPage0 scan */
-#define MPT_RPORT_INFO_FLAGS_MAPPED_VDEV 0x04	/* target mapped in vdev */
 
 /*
  * data allocated for each fc rport device
@@ -501,7 +500,6 @@ struct mptfc_rport_info
 	struct scsi_target *starget;
 	FCDevicePage0_t pg0;
 	u8		flags;
-	u8		remap_needed;
 };
 
 /*
@@ -628,11 +626,11 @@ typedef struct _MPT_ADAPTER
 	struct work_struct	 mptscsih_persistTask;
 
 	struct list_head	 fc_rports;
-	spinlock_t		 fc_rport_lock; /* list and ri flags */
 	spinlock_t		 fc_rescan_work_lock;
 	int			 fc_rescan_work_count;
 	struct work_struct	 fc_rescan_work;
-
+	char			 fc_rescan_work_q_name[KOBJ_NAME_LEN];
+	struct workqueue_struct *fc_rescan_work_q;
 } MPT_ADAPTER;
 
 /*
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index b343f2a68b1..856487741ef 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -341,9 +341,6 @@ mptfc_generate_rport_ids(FCDevicePage0_t *pg0, struct fc_rport_identifiers *rid)
 	rid->port_name = ((u64)pg0->WWPN.High) << 32 | (u64)pg0->WWPN.Low;
 	rid->port_id =   pg0->PortIdentifier;
 	rid->roles = FC_RPORT_ROLE_UNKNOWN;
-	rid->roles |= FC_RPORT_ROLE_FCP_TARGET;
-	if (pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR)
-		rid->roles |= FC_RPORT_ROLE_FCP_INITIATOR;
 
 	return 0;
 }
@@ -355,15 +352,18 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 	struct fc_rport		*rport;
 	struct mptfc_rport_info	*ri;
 	int			new_ri = 1;
-	u64			pn;
-	unsigned long		flags;
+	u64			pn, nn;
 	VirtTarget		*vtarget;
+	u32			roles = FC_RPORT_ROLE_UNKNOWN;
 
 	if (mptfc_generate_rport_ids(pg0, &rport_ids) < 0)
 		return;
 
+	roles |= FC_RPORT_ROLE_FCP_TARGET;
+	if (pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR)
+		roles |= FC_RPORT_ROLE_FCP_INITIATOR;
+
 	/* scan list looking for a match */
-	spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 	list_for_each_entry(ri, &ioc->fc_rports, list) {
 		pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
 		if (pn == rport_ids.port_name) {	/* match */
@@ -373,11 +373,9 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 		}
 	}
 	if (new_ri) {	/* allocate one */
-		spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
 		ri = kzalloc(sizeof(struct mptfc_rport_info), GFP_KERNEL);
 		if (!ri)
 			return;
-		spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 		list_add_tail(&ri->list, &ioc->fc_rports);
 	}
 
@@ -387,14 +385,11 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 	/* MPT_RPORT_INFO_FLAGS_REGISTERED - rport not previously deleted */
 	if (!(ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED)) {
 		ri->flags |= MPT_RPORT_INFO_FLAGS_REGISTERED;
-		spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
 		rport = fc_remote_port_add(ioc->sh, channel, &rport_ids);
-		spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 		if (rport) {
 			ri->rport = rport;
 			if (new_ri) /* may have been reset by user */
 				rport->dev_loss_tmo = mptfc_dev_loss_tmo;
-			*((struct mptfc_rport_info **)rport->dd_data) = ri;
 			/*
 			 * if already mapped, remap here.  If not mapped,
 			 * target_alloc will allocate vtarget and map,
@@ -406,16 +401,21 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 					vtarget->target_id = pg0->CurrentTargetID;
 					vtarget->bus_id = pg0->CurrentBus;
 				}
-				ri->remap_needed = 0;
 			}
+			*((struct mptfc_rport_info **)rport->dd_data) = ri;
+			/* scan will be scheduled once rport becomes a target */
+			fc_remote_port_rolechg(rport,roles);
+
+			pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+			nn = (u64)ri->pg0.WWNN.High << 32 | (u64)ri->pg0.WWNN.Low;
 			dfcprintk ((MYIOC_s_INFO_FMT
 				"mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
 				"rport tid %d, tmo %d\n",
 					ioc->name,
 					ioc->sh->host_no,
 					pg0->PortIdentifier,
-					pg0->WWNN,
-					pg0->WWPN,
+					(unsigned long long)nn,
+					(unsigned long long)pn,
 					pg0->CurrentTargetID,
 					ri->rport->scsi_target_id,
 					ri->rport->dev_loss_tmo));
@@ -425,8 +425,6 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 			ri = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
-
 }
 
 /*
@@ -476,7 +474,6 @@ mptfc_target_alloc(struct scsi_target *starget)
 			vtarget->target_id = ri->pg0.CurrentTargetID;
 			vtarget->bus_id = ri->pg0.CurrentBus;
 			ri->starget = starget;
-			ri->remap_needed = 0;
 			rc = 0;
 		}
 	}
@@ -502,10 +499,10 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 	VirtDevice		*vdev;
 	struct scsi_target	*starget;
 	struct fc_rport		*rport;
-	unsigned long		flags;
 
 
-	rport = starget_to_rport(scsi_target(sdev));
+	starget = scsi_target(sdev);
+	rport = starget_to_rport(starget);
 
 	if (!rport || fc_remote_port_chkready(rport))
 		return -ENXIO;
@@ -519,10 +516,8 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 		return -ENOMEM;
 	}
 
-	spin_lock_irqsave(&hd->ioc->fc_rport_lock,flags);
 
 	sdev->hostdata = vdev;
-	starget = scsi_target(sdev);
 	vtarget = starget->hostdata;
 
 	if (vtarget->num_luns == 0) {
@@ -535,14 +530,16 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 	vdev->vtarget = vtarget;
 	vdev->lun = sdev->lun;
 
-	spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
-
 	vtarget->num_luns++;
 
+
 #ifdef DMPT_DEBUG_FC
-	 {
+	{
+	u64 nn, pn;
 	struct mptfc_rport_info *ri;
 	ri = *((struct mptfc_rport_info **)rport->dd_data);
+	pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+	nn = (u64)ri->pg0.WWNN.High << 32 | (u64)ri->pg0.WWNN.Low;
 	dfcprintk ((MYIOC_s_INFO_FMT
 		"mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
 	        "CurrentTargetID %d, %x %llx %llx\n",
@@ -550,7 +547,9 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 		sdev->host->host_no,
 		vtarget->num_luns,
 		sdev->id, ri->pg0.CurrentTargetID,
-		ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN));
+		ri->pg0.PortIdentifier,
+		(unsigned long long)pn,
+		(unsigned long long)nn));
 	}
 #endif
 
@@ -570,11 +569,31 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 		done(SCpnt);
 		return 0;
 	}
+
+	/* dd_data is null until finished adding target */
 	ri = *((struct mptfc_rport_info **)rport->dd_data);
-	if (unlikely(ri->remap_needed))
-		return SCSI_MLQUEUE_HOST_BUSY;
+	if (unlikely(!ri)) {
+		dfcprintk ((MYIOC_s_INFO_FMT
+			"mptfc_qcmd.%d: %d:%d, dd_data is null.\n",
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name,
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no,
+			SCpnt->device->id,SCpnt->device->lun));
+		SCpnt->result = DID_IMM_RETRY << 16;
+		done(SCpnt);
+		return 0;
+	}
 
-	return mptscsih_qcmd(SCpnt,done);
+	err = mptscsih_qcmd(SCpnt,done);
+#ifdef DMPT_DEBUG_FC
+	if (unlikely(err)) {
+		dfcprintk ((MYIOC_s_INFO_FMT
+			"mptfc_qcmd.%d: %d:%d, mptscsih_qcmd returns non-zero.\n",
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name,
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no,
+			SCpnt->device->id,SCpnt->device->lun));
+	}
+#endif
+	return err;
 }
 
 static void
@@ -615,18 +634,17 @@ mptfc_rescan_devices(void *arg)
 	MPT_ADAPTER		*ioc = (MPT_ADAPTER *)arg;
 	int			ii;
 	int			work_to_do;
+	u64			pn;
 	unsigned long		flags;
 	struct mptfc_rport_info *ri;
 
 	do {
 		/* start by tagging all ports as missing */
-		spin_lock_irqsave(&ioc->fc_rport_lock,flags);
 		list_for_each_entry(ri, &ioc->fc_rports, list) {
 			if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) {
 				ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING;
 			}
 		}
-		spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
 
 		/*
 		 * now rescan devices known to adapter,
@@ -639,33 +657,24 @@ mptfc_rescan_devices(void *arg)
 		}
 
 		/* delete devices still missing */
-		spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 		list_for_each_entry(ri, &ioc->fc_rports, list) {
 			/* if newly missing, delete it */
-			if ((ri->flags & (MPT_RPORT_INFO_FLAGS_REGISTERED |
-					  MPT_RPORT_INFO_FLAGS_MISSING))
-			  == (MPT_RPORT_INFO_FLAGS_REGISTERED |
-			      MPT_RPORT_INFO_FLAGS_MISSING)) {
+			if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) {
 
 				ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED|
 					       MPT_RPORT_INFO_FLAGS_MISSING);
-				ri->remap_needed = 1;
-				fc_remote_port_delete(ri->rport);
-				/*
-				 * remote port not really deleted 'cause
-				 * binding is by WWPN and driver only
-				 * registers FCP_TARGETs but cannot trust
-				 * data structures.
-				 */
+				fc_remote_port_delete(ri->rport);	/* won't sleep */
 				ri->rport = NULL;
+
+				pn = (u64)ri->pg0.WWPN.High << 32 |
+				     (u64)ri->pg0.WWPN.Low;
 				dfcprintk ((MYIOC_s_INFO_FMT
 					"mptfc_rescan.%d: %llx deleted\n",
 					ioc->name,
 					ioc->sh->host_no,
-					ri->pg0.WWPN));
+					(unsigned long long)pn));
 			}
 		}
-		spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
 
 		/*
 		 * allow multiple passes as target state
@@ -870,10 +879,23 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_mptfc_probe;
 	}
 
-	for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
-		mptfc_init_host_attr(ioc,ii);
-		mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev);
-	}
+	/* initialize workqueue */
+
+	snprintf(ioc->fc_rescan_work_q_name, KOBJ_NAME_LEN, "mptfc_wq_%d",
+		sh->host_no);
+	ioc->fc_rescan_work_q =
+		create_singlethread_workqueue(ioc->fc_rescan_work_q_name);
+	if (!ioc->fc_rescan_work_q)
+		goto out_mptfc_probe;
+
+	/*
+	 * scan for rports -
+	 *	by doing it via the workqueue, some locking is eliminated
+	 */
+
+	ioc->fc_rescan_work_count = 1;
+	queue_work(ioc->fc_rescan_work_q, &ioc->fc_rescan_work);
+	flush_workqueue(ioc->fc_rescan_work_q);
 
 	return 0;
 
@@ -949,8 +971,18 @@ mptfc_init(void)
 static void __devexit
 mptfc_remove(struct pci_dev *pdev)
 {
-	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
-	struct mptfc_rport_info *p, *n;
+	MPT_ADAPTER		*ioc = pci_get_drvdata(pdev);
+	struct mptfc_rport_info	*p, *n;
+	struct workqueue_struct *work_q;
+	unsigned long		flags;
+
+	/* destroy workqueue */
+	if ((work_q=ioc->fc_rescan_work_q)) {
+		spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+		ioc->fc_rescan_work_q = NULL;
+		spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+		destroy_workqueue(work_q);
+	}
 
 	fc_remove_host(ioc->sh);
 
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index e9716b10ace..af6ec553ff7 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -91,6 +91,7 @@ enum mptsas_hotplug_action {
 	MPTSAS_DEL_DEVICE,
 	MPTSAS_ADD_RAID,
 	MPTSAS_DEL_RAID,
+	MPTSAS_IGNORE_EVENT,
 };
 
 struct mptsas_hotplug_event {
@@ -298,6 +299,26 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
 	return rc;
 }
 
+/*
+ * Returns true if there is a scsi end device
+ */
+static inline int
+mptsas_is_end_device(struct mptsas_devinfo * attached)
+{
+	if ((attached->handle) &&
+	    (attached->device_info &
+	    MPI_SAS_DEVICE_INFO_END_DEVICE) &&
+	    ((attached->device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET) |
+	    (attached->device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET) |
+	    (attached->device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
+		return 1;
+	else
+		return 0;
+}
+
 static int
 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 		u32 form, u32 form_specific)
@@ -872,7 +893,11 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 	SasDevicePage0_t *buffer;
 	dma_addr_t dma_handle;
 	__le64 sas_address;
-	int error;
+	int error=0;
+
+	if (ioc->sas_discovery_runtime &&
+		mptsas_is_end_device(device_info))
+			goto out;
 
 	hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
@@ -1009,7 +1034,11 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	CONFIGPARMS cfg;
 	SasExpanderPage1_t *buffer;
 	dma_addr_t dma_handle;
-	int error;
+	int error=0;
+
+	if (ioc->sas_discovery_runtime &&
+		mptsas_is_end_device(&phy_info->attached))
+			goto out;
 
 	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
@@ -1068,26 +1097,6 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	return error;
 }
 
-/*
- * Returns true if there is a scsi end device
- */
-static inline int
-mptsas_is_end_device(struct mptsas_devinfo * attached)
-{
-	if ((attached->handle) &&
-	    (attached->device_info &
-	    MPI_SAS_DEVICE_INFO_END_DEVICE) &&
-	    ((attached->device_info &
-	    MPI_SAS_DEVICE_INFO_SSP_TARGET) |
-	    (attached->device_info &
-	    MPI_SAS_DEVICE_INFO_STP_TARGET) |
-	    (attached->device_info &
-	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
-		return 1;
-	else
-		return 0;
-}
-
 static void
 mptsas_parse_device_info(struct sas_identify *identify,
 		struct mptsas_devinfo *device_info)
@@ -1737,6 +1746,9 @@ mptsas_hotplug_work(void *arg)
 		break;
 	case MPTSAS_ADD_DEVICE:
 
+		if (ev->phys_disk_num_valid)
+			mpt_findImVolumes(ioc);
+
 		/*
 		 * Refresh sas device pg0 data
 		 */
@@ -1868,6 +1880,9 @@ mptsas_hotplug_work(void *arg)
 		scsi_device_put(sdev);
 		mpt_findImVolumes(ioc);
 		break;
+	case MPTSAS_IGNORE_EVENT:
+	default:
+		break;
 	}
 
 	kfree(ev);
@@ -1940,7 +1955,8 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 		EVENT_DATA_RAID *raid_event_data)
 {
 	struct mptsas_hotplug_event *ev;
-	RAID_VOL0_STATUS * volumeStatus;
+	int status = le32_to_cpu(raid_event_data->SettingsStatus);
+	int state = (status >> 8) & 0xff;
 
 	if (ioc->bus_type != SAS)
 		return;
@@ -1955,6 +1971,7 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 	INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
 	ev->ioc = ioc;
 	ev->id = raid_event_data->VolumeID;
+	ev->event_type = MPTSAS_IGNORE_EVENT;
 
 	switch (raid_event_data->ReasonCode) {
 	case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
@@ -1966,6 +1983,25 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 		ev->phys_disk_num = raid_event_data->PhysDiskNum;
 		ev->event_type = MPTSAS_DEL_DEVICE;
 		break;
+	case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
+		switch (state) {
+		case MPI_PD_STATE_ONLINE:
+			ioc->raid_data.isRaid = 1;
+			ev->phys_disk_num_valid = 1;
+			ev->phys_disk_num = raid_event_data->PhysDiskNum;
+			ev->event_type = MPTSAS_ADD_DEVICE;
+			break;
+		case MPI_PD_STATE_MISSING:
+		case MPI_PD_STATE_NOT_COMPATIBLE:
+		case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
+		case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
+		case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
+			ev->event_type = MPTSAS_DEL_DEVICE;
+			break;
+		default:
+			break;
+		}
+		break;
 	case MPI_EVENT_RAID_RC_VOLUME_DELETED:
 		ev->event_type = MPTSAS_DEL_RAID;
 		break;
@@ -1973,11 +2009,18 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 		ev->event_type = MPTSAS_ADD_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
-		volumeStatus = (RAID_VOL0_STATUS *) &
-		    raid_event_data->SettingsStatus;
-		ev->event_type = (volumeStatus->State ==
-		    MPI_RAIDVOL0_STATUS_STATE_FAILED) ?
-		    MPTSAS_DEL_RAID : MPTSAS_ADD_RAID;
+		switch (state) {
+		case MPI_RAIDVOL0_STATUS_STATE_FAILED:
+		case MPI_RAIDVOL0_STATUS_STATE_MISSING:
+			ev->event_type = MPTSAS_DEL_RAID;
+			break;
+		case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
+		case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
+			ev->event_type = MPTSAS_ADD_RAID;
+			break;
+		default:
+			break;
+		}
 		break;
 	default:
 		break;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 3729062db31..84fa271eb8f 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -632,7 +632,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 
 		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
 			/* Spoof to SCSI Selection Timeout! */
-			sc->result = DID_NO_CONNECT << 16;
+			if (ioc->bus_type != FC)
+				sc->result = DID_NO_CONNECT << 16;
+			/* else fibre, just stall until rescan event */
+			else
+				sc->result = DID_REQUEUE << 16;
 
 			if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
 				hd->sel_timeout[pScsiReq->TargetID]++;
@@ -877,7 +881,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
 	struct scsi_cmnd *sc;
 
 	dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
-			vdevice->target_id, vdevice->lun, max));
+			vdevice->vtarget->target_id, vdevice->lun, max));
 
 	for (ii=0; ii < max; ii++) {
 		if ((sc = hd->ScsiLookup[ii]) != NULL) {
@@ -1645,7 +1649,6 @@ int
 mptscsih_abort(struct scsi_cmnd * SCpnt)
 {
 	MPT_SCSI_HOST	*hd;
-	MPT_ADAPTER	*ioc;
 	MPT_FRAME_HDR	*mf;
 	u32		 ctx2abort;
 	int		 scpnt_idx;
@@ -1663,14 +1666,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 		return FAILED;
 	}
 
-	ioc = hd->ioc;
-	if (hd->resetPending) {
-		return FAILED;
-	}
-
-	if (hd->timeouts < -1)
-		hd->timeouts++;
-
 	/* Find this command
 	 */
 	if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
@@ -1684,6 +1679,13 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 		return SUCCESS;
 	}
 
+	if (hd->resetPending) {
+		return FAILED;
+	}
+
+	if (hd->timeouts < -1)
+		hd->timeouts++;
+
 	printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
 	       hd->ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
@@ -1703,7 +1705,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	vdev = SCpnt->device->hostdata;
 	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
 		vdev->vtarget->bus_id, vdev->vtarget->target_id, vdev->lun,
-		ctx2abort, mptscsih_get_tm_timeout(ioc));
+		ctx2abort, mptscsih_get_tm_timeout(hd->ioc));
 
 	printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
 		hd->ioc->name,
@@ -2521,15 +2523,15 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 
 		/* 7. FC: Rescan for blocked rports which might have returned.
 		 */
-		else if (ioc->bus_type == FC) {
-			int work_count;
-			unsigned long flags;
-
+		if (ioc->bus_type == FC) {
 			spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
-			work_count = ++ioc->fc_rescan_work_count;
+			if (ioc->fc_rescan_work_q) {
+				if (ioc->fc_rescan_work_count++ == 0) {
+					queue_work(ioc->fc_rescan_work_q,
+						   &ioc->fc_rescan_work);
+				}
+			}
 			spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
-			if (work_count == 1)
-				schedule_work(&ioc->fc_rescan_work);
 		}
 		dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
 
@@ -2544,7 +2546,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 {
 	MPT_SCSI_HOST *hd;
 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
-	int work_count;
 	unsigned long flags;
 
 	devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
@@ -2569,10 +2570,13 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 
 	case MPI_EVENT_RESCAN:				/* 06 */
 		spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
-		work_count = ++ioc->fc_rescan_work_count;
+		if (ioc->fc_rescan_work_q) {
+			if (ioc->fc_rescan_work_count++ == 0) {
+				queue_work(ioc->fc_rescan_work_q,
+					   &ioc->fc_rescan_work);
+			}
+		}
 		spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
-		if (work_count == 1)
-			schedule_work(&ioc->fc_rescan_work);
 		break;
 
 		/*
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 09c745b19cc..f2a4d382ea1 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -783,6 +783,70 @@ static struct pci_device_id mptspi_pci_table[] = {
 };
 MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
 
+
+/*
+ * renegotiate for a given target
+ */
+static void
+mptspi_dv_renegotiate_work(void *data)
+{
+	struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data;
+	struct _MPT_SCSI_HOST *hd = wqw->hd;
+	struct scsi_device *sdev;
+
+	kfree(wqw);
+
+	shost_for_each_device(sdev, hd->ioc->sh)
+		mptspi_dv_device(hd, sdev);
+}
+
+static void
+mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd)
+{
+	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
+
+	if (!wqw)
+		return;
+
+	INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work, wqw);
+	wqw->hd = hd;
+
+	schedule_work(&wqw->work);
+}
+
+/*
+ * spi module reset handler
+ */
+static int
+mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+	struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata;
+	int rc;
+
+	rc = mptscsih_ioc_reset(ioc, reset_phase);
+
+	if (reset_phase == MPT_IOC_POST_RESET)
+		mptspi_dv_renegotiate(hd);
+
+	return rc;
+}
+
+/*
+ * spi module resume handler
+ */
+static int
+mptspi_resume(struct pci_dev *pdev)
+{
+	MPT_ADAPTER 	*ioc = pci_get_drvdata(pdev);
+	struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata;
+	int rc;
+
+	rc = mptscsih_resume(pdev);
+	mptspi_dv_renegotiate(hd);
+
+	return rc;
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -1032,7 +1096,7 @@ static struct pci_driver mptspi_driver = {
 	.shutdown	= mptscsih_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
-	.resume		= mptscsih_resume,
+	.resume		= mptspi_resume,
 #endif
 };
 
@@ -1061,7 +1125,7 @@ mptspi_init(void)
 		  ": Registered for IOC event notifications\n"));
 	}
 
-	if (mpt_reset_register(mptspiDoneCtx, mptscsih_ioc_reset) == 0) {
+	if (mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset) == 0) {
 		dprintk((KERN_INFO MYNAM
 		  ": Registered for IOC reset notifications\n"));
 	}
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 003b077c232..45bcf098e76 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -84,7 +84,7 @@ config MMC_WBSD
 
 config MMC_AU1X
 	tristate "Alchemy AU1XX0 MMC Card Interface support"
-	depends on SOC_AU1X00 && MMC
+	depends on MMC && SOC_AU1200
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
 	  If you have a Alchemy platform with a MMC slot, say Y or M here.
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6061c2d101a..88f0eef9cf3 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -621,9 +621,6 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct at91mci_host *host = mmc_priv(mmc);
 	unsigned long at91_master_clock = clk_get_rate(mci_clk);
 
-	DBG("Clock %uHz, busmode %u, powermode %u, Vdd %u\n",
-		ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
 	if (host)
 		host->bus_mode = ios->bus_mode;
 	else
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index c0326bbc5f2..5dc4bee7abe 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 		}
 		else
 			data->bytes_xfered =
-				(data->blocks * (1 << data->blksz_bits)) -
+				(data->blocks * data->blksz) -
 				host->pio.len;
 	}
 
@@ -575,7 +575,7 @@ static int
 au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 {
 
-	int datalen = data->blocks * (1 << data->blksz_bits);
+	int datalen = data->blocks * data->blksz;
 
 	if (dma != 0)
 		host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 	if (host->dma.len == 0)
 		return MMC_ERR_TIMEOUT;
 
-	au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+	au_writel(data->blksz - 1, HOST_BLKSIZE(host));
 
 	if (host->flags & HOST_F_DMA) {
 		int i;
@@ -720,10 +720,6 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
 {
 	struct au1xmmc_host *host = mmc_priv(mmc);
 
-	DBG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
-	      host->id, ios->power_mode, ios->clock, ios->vdd,
-	      ios->bus_mode);
-
 	if (ios->power_mode == MMC_POWER_OFF)
 		au1xmmc_set_power(host, 0);
 	else if (ios->power_mode == MMC_POWER_ON) {
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index ffb7f55d346..a4eb1d0e7a7 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -102,6 +102,7 @@ struct imxmci_host {
 #define IMXMCI_PEND_CPU_DATA_b	5
 #define IMXMCI_PEND_CARD_XCHG_b	6
 #define IMXMCI_PEND_SET_INIT_b	7
+#define IMXMCI_PEND_STARTED_b	8
 
 #define IMXMCI_PEND_IRQ_m	(1 << IMXMCI_PEND_IRQ_b)
 #define IMXMCI_PEND_DMA_END_m	(1 << IMXMCI_PEND_DMA_END_b)
@@ -111,6 +112,7 @@ struct imxmci_host {
 #define IMXMCI_PEND_CPU_DATA_m	(1 << IMXMCI_PEND_CPU_DATA_b)
 #define IMXMCI_PEND_CARD_XCHG_m	(1 << IMXMCI_PEND_CARD_XCHG_b)
 #define IMXMCI_PEND_SET_INIT_m	(1 << IMXMCI_PEND_SET_INIT_b)
+#define IMXMCI_PEND_STARTED_m	(1 << IMXMCI_PEND_STARTED_b)
 
 static void imxmci_stop_clock(struct imxmci_host *host)
 {
@@ -131,23 +133,52 @@ static void imxmci_stop_clock(struct imxmci_host *host)
 	dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n");
 }
 
-static void imxmci_start_clock(struct imxmci_host *host)
+static int imxmci_start_clock(struct imxmci_host *host)
 {
-	int i = 0;
+	unsigned int trials = 0;
+	unsigned int delay_limit = 128;
+	unsigned long flags;
+
 	MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK;
-	while(i < 0x1000) {
-	        if(!(i & 0x7f))
-			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
 
-		if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) {
-			/* Check twice before cut */
+	clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
+
+	/*
+	 * Command start of the clock, this usually succeeds in less
+	 * then 6 delay loops, but during card detection (low clockrate)
+	 * it takes up to 5000 delay loops and sometimes fails for the first time
+	 */
+	MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+
+	do {
+		unsigned int delay = delay_limit;
+
+		while(delay--){
 			if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
-				return;
+				/* Check twice before cut */
+				if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
+					return 0;
+
+			if(test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+				return 0;
 		}
 
-		i++;
-	}
-	dev_dbg(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+		local_irq_save(flags);
+		/*
+		 * Ensure, that request is not doubled under all possible circumstances.
+		 * It is possible, that cock running state is missed, because some other
+		 * IRQ or schedule delays this function execution and the clocks has
+		 * been already stopped by other means (response processing, SDHC HW)
+		 */
+		if(!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+		local_irq_restore(flags);
+
+	} while(++trials<256);
+
+	dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+
+	return -1;
 }
 
 static void imxmci_softreset(void)
@@ -187,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host,
 	if(!loops)
 		return 0;
 
-	dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
-		loops, where, *pstat, stat_mask);
+	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+	if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+			loops, where, *pstat, stat_mask);
 	return loops;
 }
 
@@ -302,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
 	WARN_ON(host->cmd != NULL);
 	host->cmd = cmd;
 
+	/* Ensure, that clock are stopped else command programming and start fails */
+	imxmci_stop_clock(host);
+
 	if (cmd->flags & MMC_RSP_BUSY)
 		cmdat |= CMD_DAT_CONT_BUSY;
 
@@ -498,7 +534,7 @@ static int imxmci_data_done(struct imxmci_host *host, unsigned int stat)
 
 	data_error = imxmci_finish_data(host, stat);
 
-	if (host->req->stop && (data_error == MMC_ERR_NONE)) {
+	if (host->req->stop) {
 		imxmci_stop_clock(host);
 		imxmci_start_cmd(host, host->req->stop, 0);
 	} else {
@@ -522,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 	int trans_done = 0;
 	unsigned int stat = *pstat;
 
-	if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+	if(host->actual_bus_width != MMC_BUS_WIDTH_4)
 		burst_len = 16;
 	else
 		burst_len = 64;
@@ -560,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 			stat = MMC_STATUS;
 
 			/* Flush extra bytes from FIFO */
-			while(flush_len >= 2){
-				flush_len -= 2;
+			while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
 				i = MMC_BUFFER_ACCESS;
 				stat = MMC_STATUS;
 				stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -622,6 +657,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid, struct pt_regs *regs)
 	atomic_set(&host->stuck_timeout, 0);
 	host->status_reg = stat;
 	set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
+	set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
 	tasklet_schedule(&host->tasklet);
 
 	return IRQ_RETVAL(handled);;
@@ -714,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data)
 			data_dir_mask = STATUS_DATA_TRANS_DONE;
 		}
 
-		imxmci_busy_wait_for_status(host, &stat,
-				data_dir_mask,
-				50, "imxmci_tasklet_fnc data");
-
 		if(stat & data_dir_mask) {
 			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
 			imxmci_data_done(host, stat);
@@ -775,10 +807,6 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct imxmci_host *host = mmc_priv(mmc);
 	int prescaler;
 
-	dev_dbg(mmc_dev(host->mmc), "clock %u power %u vdd %u width %u\n",
-		ios->clock, ios->power_mode, ios->vdd,
-		(ios->bus_width==MMC_BUS_WIDTH_4)?4:1);
-
 	if( ios->bus_width==MMC_BUS_WIDTH_4 ) {
 		host->actual_bus_width = MMC_BUS_WIDTH_4;
 		imx_gpio_mode(PB11_PF_SD_DAT3);
@@ -837,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 		imxmci_stop_clock(host);
 		MMC_CLK_RATE = (prescaler<<3) | clk;
-		imxmci_start_clock(host);
+		/*
+		 * Under my understanding, clock should not be started there, because it would
+		 * initiate SDHC sequencer and send last or random command into card
+		 */
+		/*imxmci_start_clock(host);*/
 
 		dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
 	} else {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index da6ddd910fc..6201f3086a0 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -59,21 +59,23 @@ static const unsigned int tacc_mant[] = {
 
 
 /**
- *	mmc_request_done - finish processing an MMC command
- *	@host: MMC host which completed command
- *	@mrq: MMC request which completed
+ *	mmc_request_done - finish processing an MMC request
+ *	@host: MMC host which completed request
+ *	@mrq: MMC request which request
  *
  *	MMC drivers should call this function when they have completed
- *	their processing of a command.  This should be called before the
- *	data part of the command has completed.
+ *	their processing of a request.
  */
 void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 {
 	struct mmc_command *cmd = mrq->cmd;
-	int err = mrq->cmd->error;
-	pr_debug("MMC: req done (%02x): %d: %08x %08x %08x %08x\n",
-		 cmd->opcode, err, cmd->resp[0], cmd->resp[1],
-		 cmd->resp[2], cmd->resp[3]);
+	int err = cmd->error;
+
+	pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n",
+		 mmc_hostname(host), cmd->opcode, err,
+		 mrq->data ? mrq->data->error : 0,
+		 mrq->stop ? mrq->stop->error : 0,
+		 cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
 
 	if (err && cmd->retries) {
 		cmd->retries--;
@@ -97,8 +99,9 @@ EXPORT_SYMBOL(mmc_request_done);
 void
 mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
-	pr_debug("MMC: starting cmd %02x arg %08x flags %08x\n",
-		 mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
+	pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
+		 mmc_hostname(host), mrq->cmd->opcode,
+		 mrq->cmd->arg, mrq->cmd->flags);
 
 	WARN_ON(host->card_busy == NULL);
 
@@ -312,6 +315,18 @@ void mmc_release_host(struct mmc_host *host)
 
 EXPORT_SYMBOL(mmc_release_host);
 
+static inline void mmc_set_ios(struct mmc_host *host)
+{
+	struct mmc_ios *ios = &host->ios;
+
+	pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+		 mmc_hostname(host), ios->clock, ios->bus_mode,
+		 ios->power_mode, ios->chip_select, ios->vdd,
+		 ios->bus_width);
+	
+	host->ops->set_ios(host, ios);
+}
+
 static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 {
 	int err;
@@ -364,7 +379,7 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 		}
 	}
 
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	return MMC_ERR_NONE;
 }
@@ -415,7 +430,7 @@ static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 		ocr = 3 << bit;
 
 		host->ios.vdd = bit;
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 	} else {
 		ocr = 0;
 	}
@@ -549,6 +564,7 @@ static void mmc_decode_csd(struct mmc_card *card)
 		csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 		csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 		csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+		csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 		csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 		csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
 	} else {
@@ -583,6 +599,7 @@ static void mmc_decode_csd(struct mmc_card *card)
 		csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 		csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 		csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+		csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 		csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 		csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
 	}
@@ -666,7 +683,7 @@ static void mmc_idle_cards(struct mmc_host *host)
 	struct mmc_command cmd;
 
 	host->ios.chip_select = MMC_CS_HIGH;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 
@@ -679,7 +696,7 @@ static void mmc_idle_cards(struct mmc_host *host)
 	mmc_delay(1);
 
 	host->ios.chip_select = MMC_CS_DONTCARE;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 }
@@ -704,13 +721,13 @@ static void mmc_power_up(struct mmc_host *host)
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_UP;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 
 	host->ios.clock = host->f_min;
 	host->ios.power_mode = MMC_POWER_ON;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(2);
 }
@@ -723,7 +740,7 @@ static void mmc_power_off(struct mmc_host *host)
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_OFF;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 }
 
 static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
@@ -934,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host)
 		data.timeout_ns = card->csd.tacc_ns * 10;
 		data.timeout_clks = card->csd.tacc_clks * 10;
 		data.blksz_bits = 3;
+		data.blksz = 1 << 3;
 		data.blocks = 1;
 		data.flags = MMC_DATA_READ;
 		data.sg = &sg;
@@ -971,7 +989,8 @@ static unsigned int mmc_calculate_clock(struct mmc_host *host)
 		if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr)
 			max_dtr = card->csd.max_dtr;
 
-	pr_debug("MMC: selected %d.%03dMHz transfer rate\n",
+	pr_debug("%s: selected %d.%03dMHz transfer rate\n",
+		 mmc_hostname(host),
 		 max_dtr / 1000000, (max_dtr / 1000) % 1000);
 
 	return max_dtr;
@@ -1046,7 +1065,7 @@ static void mmc_setup(struct mmc_host *host)
 	} else {
 		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
 		host->ios.clock = host->f_min;
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 
 		/*
 		 * We should remember the OCR mask from the existing
@@ -1082,7 +1101,7 @@ static void mmc_setup(struct mmc_host *host)
 	 * Ok, now switch to push-pull mode.
 	 */
 	host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_read_csds(host);
 
@@ -1128,7 +1147,7 @@ static void mmc_rescan(void *data)
 		 * attached cards and the host support.
 		 */
 		host->ios.clock = mmc_calculate_clock(host);
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 8eb2a2ede64..587458b370b 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.data.timeout_ns = card->csd.tacc_ns * 10;
 		brq.data.timeout_clks = card->csd.tacc_clks * 10;
 		brq.data.blksz_bits = md->block_bits;
+		brq.data.blksz = 1 << md->block_bits;
 		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
 		brq.stop.opcode = MMC_STOP_TRANSMISSION;
 		brq.stop.arg = 0;
@@ -187,6 +188,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			brq.cmd.opcode = MMC_WRITE_BLOCK;
 			brq.data.flags |= MMC_DATA_WRITE;
 			brq.data.blocks = 1;
+
+			/*
+			 * Scale up the timeout by the r2w factor
+			 */
+			brq.data.timeout_ns <<= card->csd.r2w_factor;
+			brq.data.timeout_clks <<= card->csd.r2w_factor;
 		}
 
 		if (brq.data.blocks > 1) {
@@ -346,7 +353,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 			 */
 			printk(KERN_ERR "%s: unable to select block size for "
 				"writing (rb%u wb%u rp%u wp%u)\n",
-				md->disk->disk_name,
+				mmc_card_id(card),
 				1 << card->csd.read_blkbits,
 				1 << card->csd.write_blkbits,
 				card->csd.read_partial,
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index df7e861e2fc..da8e4d7339c 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -402,9 +402,6 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct mmci_host *host = mmc_priv(mmc);
 	u32 clk = 0, pwr = 0;
 
-	DBG(host, "clock %uHz busmode %u powermode %u Vdd %u\n",
-	    ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
 	if (ios->clock) {
 		if (ios->clock >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index eb9a8826e9b..b49368fd96b 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -65,11 +65,6 @@ struct pxamci_host {
 	unsigned int		dma_dir;
 };
 
-static inline unsigned int ns_to_clocks(unsigned int ns)
-{
-	return (ns * (CLOCKRATE / 1000000) + 999) / 1000;
-}
-
 static void pxamci_stop_clock(struct pxamci_host *host)
 {
 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -113,6 +108,7 @@ static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
 static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 {
 	unsigned int nob = data->blocks;
+	unsigned long long clks;
 	unsigned int timeout;
 	u32 dcmd;
 	int i;
@@ -123,9 +119,11 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 		nob = 0xffff;
 
 	writel(nob, host->base + MMC_NOB);
-	writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+	writel(data->blksz, host->base + MMC_BLKLEN);
 
-	timeout = ns_to_clocks(data->timeout_ns) + data->timeout_clks;
+	clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
+	do_div(clks, 1000000000UL);
+	timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
 	writel((timeout + 255) / 256, host->base + MMC_RDTO);
 
 	if (data->flags & MMC_DATA_READ) {
@@ -200,7 +198,6 @@ static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd,
 
 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
 {
-	pr_debug("PXAMCI: request done\n");
 	host->mrq = NULL;
 	host->cmd = NULL;
 	host->data = NULL;
@@ -286,14 +283,14 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
 	 * data blocks as being in error.
 	 */
 	if (data->error == MMC_ERR_NONE)
-		data->bytes_xfered = data->blocks << data->blksz_bits;
+		data->bytes_xfered = data->blocks * data->blksz;
 	else
 		data->bytes_xfered = 0;
 
 	pxamci_disable_irq(host, DATA_TRAN_DONE);
 
 	host->data = NULL;
-	if (host->mrq->stop && data->error == MMC_ERR_NONE) {
+	if (host->mrq->stop) {
 		pxamci_stop_clock(host);
 		pxamci_start_cmd(host, host->mrq->stop, 0);
 	} else {
@@ -311,12 +308,10 @@ static irqreturn_t pxamci_irq(int irq, void *devid, struct pt_regs *regs)
 
 	ireg = readl(host->base + MMC_I_REG);
 
-	pr_debug("PXAMCI: irq %08x\n", ireg);
-
 	if (ireg) {
 		unsigned stat = readl(host->base + MMC_STAT);
 
-		pr_debug("PXAMCI: stat %08x\n", stat);
+		pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
 
 		if (ireg & END_CMD_RES)
 			handled |= pxamci_cmd_done(host, stat);
@@ -370,10 +365,6 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct pxamci_host *host = mmc_priv(mmc);
 
-	pr_debug("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
-		 ios->clock, ios->power_mode, ios->vdd / 100,
-		 ios->vdd % 100);
-
 	if (ios->clock) {
 		unsigned int clk = CLOCKRATE / ios->clock;
 		if (CLOCKRATE / clk > ios->clock)
@@ -399,7 +390,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			host->cmdat |= CMDAT_INIT;
 	}
 
-	pr_debug("pxamci_set_ios: clkrt = %x cmdat = %x\n",
+	pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
 		 host->clkrt, host->cmdat);
 }
 
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index bdbfca05002..b0053280ff2 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -570,10 +570,6 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	spin_lock_irqsave(&host->lock, flags);
 
-	DBG("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
-	     ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
-	     ios->vdd, ios->bus_width);
-
 	/*
 	 * Reset the chip on each power off.
 	 * Should clear out any weird states.
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 511f7b0b31d..8167332d401 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
 	unsigned long dmaflags;
 
 	DBGF("blksz %04x blks %04x flags %08x\n",
-		1 << data->blksz_bits, data->blocks, data->flags);
+		data->blksz, data->blocks, data->flags);
 	DBGF("tsac %d ms nsac %d clk\n",
 		data->timeout_ns / 1000000, data->timeout_clks);
 
 	/*
 	 * Calculate size.
 	 */
-	host->size = data->blocks << data->blksz_bits;
+	host->size = data->blocks * data->blksz;
 
 	/*
 	 * Check timeout values for overflow.
@@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
 	 * Two bytes are needed for each data line.
 	 */
 	if (host->bus_width == MMC_BUS_WIDTH_1) {
-		blksize = (1 << data->blksz_bits) + 2;
+		blksize = data->blksz + 2;
 
 		wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
 		wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
 	} else if (host->bus_width == MMC_BUS_WIDTH_4) {
-		blksize = (1 << data->blksz_bits) + 2 * 4;
+		blksize = data->blksz + 2 * 4;
 
 		wbsd_write_index(host, WBSD_IDX_PBSMSB,
 			((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
@@ -931,10 +931,6 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct wbsd_host *host = mmc_priv(mmc);
 	u8 clk, setup, pwr;
 
-	DBGF("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
-		ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
-		ios->vdd, ios->bus_width);
-
 	spin_lock_bh(&host->lock);
 
 	/*
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 1363083b4d8..14dbad14afb 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -52,6 +52,7 @@
 #include <linux/mii.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>
+#include <linux/crc32.h>
 #include <asm/mipsregs.h>
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -2070,23 +2071,6 @@ static void au1000_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-
-static unsigned const ethernet_polynomial = 0x04c11db7U;
-static inline u32 ether_crc(int length, unsigned char *data)
-{
-    int crc = -1;
-
-    while(--length >= 0) {
-		unsigned char current_octet = *data++;
-		int bit;
-		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-			crc = (crc << 1) ^
-				((crc < 0) ^ (current_octet & 1) ? 
-				 ethernet_polynomial : 0);
-    }
-    return crc;
-}
-
 static void set_rx_mode(struct net_device *dev)
 {
 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 3d306681919..d8233e0b789 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -650,9 +650,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 
 	/* Hardware bug work-around, the chip is unable to do PCI DMA
 	   to/from anything above 1GB :-( */
-	if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) ||
+		mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
 		/* Sigh... */
-		pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 		dev_kfree_skb_any(skb);
 		skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
 		if (skb == NULL)
@@ -660,8 +662,10 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 		mapping = pci_map_single(bp->pdev, skb->data,
 					 RX_PKT_BUF_SZ,
 					 PCI_DMA_FROMDEVICE);
-		if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (dma_mapping_error(mapping) ||
+			mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 			dev_kfree_skb_any(skb);
 			return -ENOMEM;
 		}
@@ -967,9 +971,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-	if (mapping + len > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
-		pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
 
 		bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
 					     GFP_ATOMIC|GFP_DMA);
@@ -978,8 +983,9 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		mapping = pci_map_single(bp->pdev, bounce_skb->data,
 					 len, PCI_DMA_TODEVICE);
-		if (mapping + len > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping,
+		if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping,
 					 len, PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(bounce_skb);
 			goto err_out;
@@ -1203,7 +1209,8 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_TABLE_BYTES,
 		                             DMA_BIDIRECTIONAL);
 
-		if (rx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(rx_ring_dma) ||
+			rx_ring_dma + size > B44_DMA_MASK) {
 			kfree(rx_ring);
 			goto out_err;
 		}
@@ -1229,7 +1236,8 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_TABLE_BYTES,
 		                             DMA_TO_DEVICE);
 
-		if (tx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(tx_ring_dma) ||
+			tx_ring_dma + size > B44_DMA_MASK) {
 			kfree(tx_ring);
 			goto out_err;
 		}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ca99e26660..54161aef3ca 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -55,8 +55,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.4.39"
-#define DRV_MODULE_RELDATE	"March 22, 2006"
+#define DRV_MODULE_VERSION	"1.4.40"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2945,7 +2945,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		int buf_size)
 {
 	u32 written, offset32, len32;
-	u8 *buf, start[4], end[4];
+	u8 *buf, start[4], end[4], *flash_buffer = NULL;
 	int rc = 0;
 	int align_start, align_end;
 
@@ -2985,12 +2985,19 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		memcpy(buf + align_start, data_buf, buf_size);
 	}
 
+	if (bp->flash_info->buffered == 0) {
+		flash_buffer = kmalloc(264, GFP_KERNEL);
+		if (flash_buffer == NULL) {
+			rc = -ENOMEM;
+			goto nvram_write_end;
+		}
+	}
+
 	written = 0;
 	while ((written < len32) && (rc == 0)) {
 		u32 page_start, page_end, data_start, data_end;
 		u32 addr, cmd_flags;
 		int i;
-		u8 flash_buffer[264];
 
 	        /* Find the page_start addr */
 		page_start = offset32 + written;
@@ -3061,7 +3068,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		}
 
 		/* Loop to write the new data from data_start to data_end */
-		for (addr = data_start; addr < data_end; addr += 4, i++) {
+		for (addr = data_start; addr < data_end; addr += 4, i += 4) {
 			if ((addr == page_end - 4) ||
 				((bp->flash_info->buffered) &&
 				 (addr == data_end - 4))) {
@@ -3109,6 +3116,9 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 	}
 
 nvram_write_end:
+	if (bp->flash_info->buffered == 0)
+		kfree(flash_buffer);
+
 	if (align_start || align_end)
 		kfree(buf);
 	return rc;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 1f3627470c9..038447fb5c5 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -53,6 +53,7 @@
 #define DRV_VERSION	"v1.17b"
 #define DRV_RELDATE	"2006/03/10"
 #include "dl2k.h"
+#include <linux/dma-mapping.h>
 
 static char version[] __devinitdata =
       KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";	
@@ -765,7 +766,7 @@ rio_free_tx (struct net_device *dev, int irq)
 			break;
 		skb = np->tx_skbuff[entry];
 		pci_unmap_single (np->pdev,
-				  np->tx_ring[entry].fraginfo & 0xffffffffffff,
+				  np->tx_ring[entry].fraginfo & DMA_48BIT_MASK,
 				  skb->len, PCI_DMA_TODEVICE);
 		if (irq)
 			dev_kfree_skb_irq (skb);
@@ -893,7 +894,7 @@ receive_packet (struct net_device *dev)
 			/* Small skbuffs for short packets */
 			if (pkt_len > copy_thresh) {
 				pci_unmap_single (np->pdev,
-						  desc->fraginfo & 0xffffffffffff,
+						  desc->fraginfo & DMA_48BIT_MASK,
 						  np->rx_buf_sz,
 						  PCI_DMA_FROMDEVICE);
 				skb_put (skb = np->rx_skbuff[entry], pkt_len);
@@ -901,7 +902,7 @@ receive_packet (struct net_device *dev)
 			} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
 				pci_dma_sync_single_for_cpu(np->pdev,
 				  			    desc->fraginfo & 
-							    	0xffffffffffff,
+							    	DMA_48BIT_MASK,
 							    np->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
 				skb->dev = dev;
@@ -913,7 +914,7 @@ receive_packet (struct net_device *dev)
 				skb_put (skb, pkt_len);
 				pci_dma_sync_single_for_device(np->pdev,
 				  			       desc->fraginfo &
-							       	 0xffffffffffff,
+							       	 DMA_48BIT_MASK,
 							       np->rx_buf_sz,
 							       PCI_DMA_FROMDEVICE);
 			}
@@ -1800,7 +1801,7 @@ rio_close (struct net_device *dev)
 		skb = np->rx_skbuff[i];
 		if (skb) {
 			pci_unmap_single(np->pdev, 
-					 np->rx_ring[i].fraginfo & 0xffffffffffff,
+					 np->rx_ring[i].fraginfo & DMA_48BIT_MASK,
 					 skb->len, PCI_DMA_FROMDEVICE);
 			dev_kfree_skb (skb);
 			np->rx_skbuff[i] = NULL;
@@ -1810,7 +1811,7 @@ rio_close (struct net_device *dev)
 		skb = np->tx_skbuff[i];
 		if (skb) {
 			pci_unmap_single(np->pdev, 
-					 np->tx_ring[i].fraginfo & 0xffffffffffff,
+					 np->tx_ring[i].fraginfo & DMA_48BIT_MASK,
 					 skb->len, PCI_DMA_TODEVICE);
 			dev_kfree_skb (skb);
 			np->tx_skbuff[i] = NULL;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index ecccca35c6f..d1c705b412c 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -870,13 +870,16 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 	*data = 0;
 
 	/* Hook up test interrupt handler just for this test */
- 	if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
+	if (!request_irq(irq, &e1000_test_intr, SA_PROBEIRQ, netdev->name,
+	                 netdev)) {
  		shared_int = FALSE;
  	} else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
 			      netdev->name, netdev)){
 		*data = 1;
 		return -1;
 	}
+	DPRINTK(PROBE,INFO, "testing %s interrupt\n",
+	        (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
 	E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index add8dc4aa7b..97e71a4fe8e 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -220,6 +220,7 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter);
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 static int e1000_resume(struct pci_dev *pdev);
 #endif
+static void e1000_shutdown(struct pci_dev *pdev);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /* for netdump / net console */
@@ -235,8 +236,9 @@ static struct pci_driver e1000_driver = {
 	/* Power Managment Hooks */
 #ifdef CONFIG_PM
 	.suspend  = e1000_suspend,
-	.resume   = e1000_resume
+	.resume   = e1000_resume,
 #endif
+	.shutdown = e1000_shutdown
 };
 
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -3517,7 +3519,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 	buffer_info = &rx_ring->buffer_info[i];
 
 	while (rx_desc->status & E1000_RXD_STAT_DD) {
-		struct sk_buff *skb, *next_skb;
+		struct sk_buff *skb;
 		u8 status;
 #ifdef CONFIG_E1000_NAPI
 		if (*work_done >= work_to_do)
@@ -3535,8 +3537,6 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		prefetch(next_rxd);
 
 		next_buffer = &rx_ring->buffer_info[i];
-		next_skb = next_buffer->skb;
-		prefetch(next_skb->data - NET_IP_ALIGN);
 
 		cleaned = TRUE;
 		cleaned_count++;
@@ -3666,7 +3666,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 	struct e1000_buffer *buffer_info, *next_buffer;
 	struct e1000_ps_page *ps_page;
 	struct e1000_ps_page_dma *ps_page_dma;
-	struct sk_buff *skb, *next_skb;
+	struct sk_buff *skb;
 	unsigned int i, j;
 	uint32_t length, staterr;
 	int cleaned_count = 0;
@@ -3695,8 +3695,6 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		prefetch(next_rxd);
 
 		next_buffer = &rx_ring->buffer_info[i];
-		next_skb = next_buffer->skb;
-		prefetch(next_skb->data - NET_IP_ALIGN);
 
 		cleaned = TRUE;
 		cleaned_count++;
@@ -3768,6 +3766,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 			ps_page->ps_page[j] = NULL;
 			skb->len += length;
 			skb->data_len += length;
+			skb->truesize += length;
 		}
 
 copydone:
@@ -4610,6 +4609,12 @@ e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 #endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+	e1000_suspend(pdev, PMSG_SUSPEND);
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 7627a75f4f7..feb5b223cd6 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -105,6 +105,8 @@
  *	0.50: 20 Jan 2006: Add 8021pq tagging support.
  *	0.51: 20 Jan 2006: Add 64bit consistent memory allocation for rings.
  *	0.52: 20 Jan 2006: Add MSI/MSIX support.
+ *	0.53: 19 Mar 2006: Fix init from low power mode and add hw reset.
+ *	0.54: 21 Mar 2006: Fix spin locks for multi irqs and cleanup.
  *
  * Known bugs:
  * We suspect that on some hardware no TX done interrupts are generated.
@@ -116,7 +118,7 @@
  * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
  * superfluous timer interrupts from the nic.
  */
-#define FORCEDETH_VERSION		"0.52"
+#define FORCEDETH_VERSION		"0.54"
 #define DRV_NAME			"forcedeth"
 
 #include <linux/module.h>
@@ -160,6 +162,7 @@
 #define DEV_HAS_VLAN            0x0020  /* device supports vlan tagging and striping */
 #define DEV_HAS_MSI             0x0040  /* device supports MSI */
 #define DEV_HAS_MSI_X           0x0080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL     0x0100  /* device supports power savings */
 
 enum {
 	NvRegIrqStatus = 0x000,
@@ -203,6 +206,8 @@ enum {
 #define NVREG_MISC1_HD		0x02
 #define NVREG_MISC1_FORCE	0x3b0f3c
 
+	NvRegMacReset = 0x3c,
+#define NVREG_MAC_RESET_ASSERT	0x0F3
 	NvRegTransmitterControl = 0x084,
 #define NVREG_XMITCTL_START	0x01
 	NvRegTransmitterStatus = 0x088,
@@ -326,6 +331,10 @@ enum {
 	NvRegMSIXMap0 = 0x3e0,
 	NvRegMSIXMap1 = 0x3e4,
 	NvRegMSIXIrqStatus = 0x3f0,
+
+	NvRegPowerState2 = 0x600,
+#define NVREG_POWERSTATE2_POWERUP_MASK		0x0F11
+#define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
 };
 
 /* Big endian: should work, but is untested */
@@ -414,7 +423,8 @@ typedef union _ring_type {
 #define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
 
 /* Miscelaneous hardware related defines: */
-#define NV_PCI_REGSZ		0x270
+#define NV_PCI_REGSZ_VER1      	0x270
+#define NV_PCI_REGSZ_VER2      	0x604
 
 /* various timeout delays: all in usec */
 #define NV_TXRX_RESET_DELAY	4
@@ -431,6 +441,7 @@ typedef union _ring_type {
 #define NV_MIIBUSY_DELAY	50
 #define NV_MIIPHY_DELAY	10
 #define NV_MIIPHY_DELAYMAX	10000
+#define NV_MAC_RESET_DELAY	64
 
 #define NV_WAKEUPPATTERNS	5
 #define NV_WAKEUPMASKENTRIES	4
@@ -552,6 +563,8 @@ struct fe_priv {
 	u32 desc_ver;
 	u32 txrxctl_bits;
 	u32 vlanctl_bits;
+	u32 driver_data;
+	u32 register_size;
 
 	void __iomem *base;
 
@@ -698,6 +711,72 @@ static void setup_hw_rings(struct net_device *dev, int rxtx_flags)
 	}
 }
 
+static int using_multi_irqs(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+	    ((np->msi_flags & NV_MSI_X_ENABLED) &&
+	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1)))
+		return 0;
+	else
+		return 1;
+}
+
+static void nv_enable_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
+	} else {
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+	}
+}
+
+static void nv_disable_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
+	} else {
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+	}
+}
+
+/* In MSIX mode, a write to irqmask behaves as XOR */
+static void nv_enable_hw_interrupts(struct net_device *dev, u32 mask)
+{
+	u8 __iomem *base = get_hwbase(dev);
+
+	writel(mask, base + NvRegIrqMask);
+}
+
+static void nv_disable_hw_interrupts(struct net_device *dev, u32 mask)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+
+	if (np->msi_flags & NV_MSI_X_ENABLED) {
+		writel(mask, base + NvRegIrqMask);
+	} else {
+		if (np->msi_flags & NV_MSI_ENABLED)
+			writel(0, base + NvRegMSIIrqMask);
+		writel(0, base + NvRegIrqMask);
+	}
+}
+
 #define MII_READ	(-1)
 /* mii_rw: read/write a register on the PHY.
  *
@@ -919,6 +998,24 @@ static void nv_txrx_reset(struct net_device *dev)
 	pci_push(base);
 }
 
+static void nv_mac_reset(struct net_device *dev)
+{
+	struct fe_priv *np = netdev_priv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+
+	dprintk(KERN_DEBUG "%s: nv_mac_reset\n", dev->name);
+	writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl);
+	pci_push(base);
+	writel(NVREG_MAC_RESET_ASSERT, base + NvRegMacReset);
+	pci_push(base);
+	udelay(NV_MAC_RESET_DELAY);
+	writel(0, base + NvRegMacReset);
+	pci_push(base);
+	udelay(NV_MAC_RESET_DELAY);
+	writel(NVREG_TXRXCTL_BIT2 | np->txrxctl_bits, base + NvRegTxRxControl);
+	pci_push(base);
+}
+
 /*
  * nv_get_stats: dev->get_stats function
  * Get latest stats value from the nic.
@@ -989,24 +1086,25 @@ static void nv_do_rx_refill(unsigned long data)
 	struct net_device *dev = (struct net_device *) data;
 	struct fe_priv *np = netdev_priv(dev);
 
-
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		disable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
 	} else {
 		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
 	}
 	if (nv_alloc_rx(dev)) {
-		spin_lock(&np->lock);
+		spin_lock_irq(&np->lock);
 		if (!np->in_shutdown)
 			mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
-		spin_unlock(&np->lock);
+		spin_unlock_irq(&np->lock);
 	}
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		enable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
 	} else {
 		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
 	}
@@ -1331,7 +1429,7 @@ static void nv_tx_timeout(struct net_device *dev)
 				dev->name, (unsigned long)np->ring_addr,
 				np->next_tx, np->nic_tx);
 		printk(KERN_INFO "%s: Dumping tx registers\n", dev->name);
-		for (i=0;i<0x400;i+= 32) {
+		for (i=0;i<=np->register_size;i+= 32) {
 			printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
 					i,
 					readl(base + i + 0), readl(base + i + 4),
@@ -1638,15 +1736,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
 		 * guessed, there is probably a simpler approach.
 		 * Changing the MTU is a rare event, it shouldn't matter.
 		 */
-		if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-		    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-		     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-			disable_irq(dev->irq);
-		} else {
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
-		}
+		nv_disable_irq(dev);
 		spin_lock_bh(&dev->xmit_lock);
 		spin_lock(&np->lock);
 		/* stop engines */
@@ -1679,15 +1769,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
 		nv_start_tx(dev);
 		spin_unlock(&np->lock);
 		spin_unlock_bh(&dev->xmit_lock);
-		if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-		    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-		     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-			enable_irq(dev->irq);
-		} else {
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
-		}
+		nv_enable_irq(dev);
 	}
 	return 0;
 }
@@ -2078,16 +2160,16 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
 		if (!(events & np->irqmask))
 			break;
 
-		spin_lock(&np->lock);
+		spin_lock_irq(&np->lock);
 		nv_tx_done(dev);
-		spin_unlock(&np->lock);
+		spin_unlock_irq(&np->lock);
 		
 		if (events & (NVREG_IRQ_TX_ERR)) {
 			dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
 						dev->name, events);
 		}
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_TX_ALL, base + NvRegIrqMask);
 			pci_push(base);
@@ -2097,7 +2179,7 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2127,14 +2209,14 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 		
 		nv_rx_process(dev);
 		if (nv_alloc_rx(dev)) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			if (!np->in_shutdown)
 				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 		}
 		
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
 			pci_push(base);
@@ -2144,7 +2226,7 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2173,14 +2255,14 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 			break;
 		
 		if (events & NVREG_IRQ_LINK) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			nv_link_irq(dev);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 		}
 		if (np->need_linktimer && time_after(jiffies, np->link_timeout)) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			nv_linkchange(dev);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			np->link_timeout = jiffies + LINK_TIMEOUT;
 		}
 		if (events & (NVREG_IRQ_UNKNOWN)) {
@@ -2188,7 +2270,7 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 						dev->name, events);
 		}
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_OTHER, base + NvRegIrqMask);
 			pci_push(base);
@@ -2198,7 +2280,7 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2221,10 +2303,11 @@ static void nv_do_nic_poll(unsigned long data)
 	 * nv_nic_irq because that may decide to do otherwise
 	 */
 
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		disable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
 		mask = np->irqmask;
 	} else {
 		if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
@@ -2247,11 +2330,12 @@ static void nv_do_nic_poll(unsigned long data)
 	writel(mask, base + NvRegIrqMask);
 	pci_push(base);
 
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) || 
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+	if (!using_multi_irqs(dev)) {
 		nv_nic_irq((int) 0, (void *) data, (struct pt_regs *) NULL);
-		enable_irq(dev->irq);
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
 	} else {
 		if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
 			nv_nic_irq_rx((int) 0, (void *) data, (struct pt_regs *) NULL);
@@ -2488,11 +2572,11 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 }
 
 #define FORCEDETH_REGS_VER	1
-#define FORCEDETH_REGS_SIZE	0x400 /* 256 32-bit registers */
 
 static int nv_get_regs_len(struct net_device *dev)
 {
-	return FORCEDETH_REGS_SIZE;
+	struct fe_priv *np = netdev_priv(dev);
+	return np->register_size;
 }
 
 static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
@@ -2504,7 +2588,7 @@ static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void
 
 	regs->version = FORCEDETH_REGS_VER;
 	spin_lock_irq(&np->lock);
-	for (i=0;i<FORCEDETH_REGS_SIZE/sizeof(u32);i++)
+	for (i = 0;i <= np->register_size/sizeof(u32); i++)
 		rbuf[i] = readl(base + i*sizeof(u32));
 	spin_unlock_irq(&np->lock);
 }
@@ -2531,6 +2615,18 @@ static int nv_nway_reset(struct net_device *dev)
 	return ret;
 }
 
+#ifdef NETIF_F_TSO
+static int nv_set_tso(struct net_device *dev, u32 value)
+{
+	struct fe_priv *np = netdev_priv(dev);
+
+	if ((np->driver_data & DEV_HAS_CHECKSUM))
+		return ethtool_op_set_tso(dev, value);
+	else
+		return value ? -EOPNOTSUPP : 0;
+}
+#endif
+
 static struct ethtool_ops ops = {
 	.get_drvinfo = nv_get_drvinfo,
 	.get_link = ethtool_op_get_link,
@@ -2542,6 +2638,10 @@ static struct ethtool_ops ops = {
 	.get_regs = nv_get_regs,
 	.nway_reset = nv_nway_reset,
 	.get_perm_addr = ethtool_op_get_perm_addr,
+#ifdef NETIF_F_TSO
+	.get_tso = ethtool_op_get_tso,
+	.set_tso = nv_set_tso
+#endif
 };
 
 static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
@@ -2598,6 +2698,113 @@ static void set_msix_vector_map(struct net_device *dev, u32 vector, u32 irqmask)
 	writel(readl(base + NvRegMSIXMap1) | msixmap, base + NvRegMSIXMap1);
 }
 
+static int nv_request_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+	int ret = 1;
+	int i;
+
+	if (np->msi_flags & NV_MSI_X_CAPABLE) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+			np->msi_x_entry[i].entry = i;
+		}
+		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
+			np->msi_flags |= NV_MSI_X_ENABLED;
+			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
+				/* Request irq for rx handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_err;
+				}
+				/* Request irq for tx handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_free_rx;
+				}
+				/* Request irq for link and timer handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_free_tx;
+				}
+				/* map interrupts to their respective vector */
+				writel(0, base + NvRegMSIXMap0);
+				writel(0, base + NvRegMSIXMap1);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
+			} else {
+				/* Request irq for all interrupts */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_err;
+				}
+
+				/* map interrupts to vector 0 */
+				writel(0, base + NvRegMSIXMap0);
+				writel(0, base + NvRegMSIXMap1);
+			}
+		}
+	}
+	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
+		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
+			np->msi_flags |= NV_MSI_ENABLED;
+			if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+				pci_disable_msi(np->pci_dev);
+				np->msi_flags &= ~NV_MSI_ENABLED;
+				goto out_err;
+			}
+
+			/* map interrupts to vector 0 */
+			writel(0, base + NvRegMSIMap0);
+			writel(0, base + NvRegMSIMap1);
+			/* enable msi vector 0 */
+			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+		}
+	}
+	if (ret != 0) {
+		if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
+			goto out_err;
+	}
+
+	return 0;
+out_free_tx:
+	free_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, dev);
+out_free_rx:
+	free_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, dev);
+out_err:
+	return 1;
+}
+
+static void nv_free_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	int i;
+
+	if (np->msi_flags & NV_MSI_X_ENABLED) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+			free_irq(np->msi_x_entry[i].vector, dev);
+		}
+		pci_disable_msix(np->pci_dev);
+		np->msi_flags &= ~NV_MSI_X_ENABLED;
+	} else {
+		free_irq(np->pci_dev->irq, dev);
+		if (np->msi_flags & NV_MSI_ENABLED) {
+			pci_disable_msi(np->pci_dev);
+			np->msi_flags &= ~NV_MSI_ENABLED;
+		}
+	}
+}
+
 static int nv_open(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
@@ -2608,6 +2815,8 @@ static int nv_open(struct net_device *dev)
 	dprintk(KERN_DEBUG "nv_open: begin\n");
 
 	/* 1) erase previous misconfiguration */
+	if (np->driver_data & DEV_HAS_POWER_CNTRL)
+		nv_mac_reset(dev);
 	/* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
 	writel(0, base + NvRegMulticastAddrB);
@@ -2688,86 +2897,18 @@ static int nv_open(struct net_device *dev)
 	udelay(10);
 	writel(readl(base + NvRegPowerState) | NVREG_POWERSTATE_VALID, base + NvRegPowerState);
 
-	writel(0, base + NvRegIrqMask);
+	nv_disable_hw_interrupts(dev, np->irqmask);
 	pci_push(base);
 	writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus);
 	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
 	pci_push(base);
 
-	if (np->msi_flags & NV_MSI_X_CAPABLE) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-			np->msi_x_entry[i].entry = i;
-		}
-		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
-			np->msi_flags |= NV_MSI_X_ENABLED;
-			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
-				/* Request irq for rx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for tx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for link and timer handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to their respective vector */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
-			} else {
-				/* Request irq for all interrupts */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to vector 0 */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-			}
-		}
-	}
-	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
-		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
-			np->msi_flags |= NV_MSI_ENABLED;
-			if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-				pci_disable_msi(np->pci_dev);
-				np->msi_flags &= ~NV_MSI_ENABLED;
-				goto out_drain;
-			}
-
-			/* map interrupts to vector 0 */
-			writel(0, base + NvRegMSIMap0);
-			writel(0, base + NvRegMSIMap1);
-			/* enable msi vector 0 */
-			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
-		}
-	}
-	if (ret != 0) {
-		if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
-			goto out_drain;
+	if (nv_request_irq(dev)) {
+		goto out_drain;
 	}
 
 	/* ask for interrupts */
-	writel(np->irqmask, base + NvRegIrqMask);
+	nv_enable_hw_interrupts(dev, np->irqmask);
 
 	spin_lock_irq(&np->lock);
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
@@ -2811,7 +2952,6 @@ static int nv_close(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base;
-	int i;
 
 	spin_lock_irq(&np->lock);
 	np->in_shutdown = 1;
@@ -2829,31 +2969,13 @@ static int nv_close(struct net_device *dev)
 
 	/* disable interrupts on the nic or we will lock up */
 	base = get_hwbase(dev);
-	if (np->msi_flags & NV_MSI_X_ENABLED) {
-		writel(np->irqmask, base + NvRegIrqMask);
-	} else {
-		if (np->msi_flags & NV_MSI_ENABLED)
-			writel(0, base + NvRegMSIIrqMask);
-		writel(0, base + NvRegIrqMask);
-	}
+	nv_disable_hw_interrupts(dev, np->irqmask);
 	pci_push(base);
 	dprintk(KERN_INFO "%s: Irqmask is zero again\n", dev->name);
 
 	spin_unlock_irq(&np->lock);
 
-	if (np->msi_flags & NV_MSI_X_ENABLED) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-			free_irq(np->msi_x_entry[i].vector, dev);
-		}
-		pci_disable_msix(np->pci_dev);
-		np->msi_flags &= ~NV_MSI_X_ENABLED;
-	} else {
-		free_irq(np->pci_dev->irq, dev);
-		if (np->msi_flags & NV_MSI_ENABLED) {
-			pci_disable_msi(np->pci_dev);
-			np->msi_flags &= ~NV_MSI_ENABLED;
-		}
-	}
+	nv_free_irq(dev);
 
 	drain_ring(dev);
 
@@ -2878,6 +3000,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	unsigned long addr;
 	u8 __iomem *base;
 	int err, i;
+	u32 powerstate;
 
 	dev = alloc_etherdev(sizeof(struct fe_priv));
 	err = -ENOMEM;
@@ -2910,6 +3033,11 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (err < 0)
 		goto out_disable;
 
+	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL))
+		np->register_size = NV_PCI_REGSZ_VER2;
+	else
+		np->register_size = NV_PCI_REGSZ_VER1;
+
 	err = -EINVAL;
 	addr = 0;
 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
@@ -2918,7 +3046,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 				pci_resource_len(pci_dev, i),
 				pci_resource_flags(pci_dev, i));
 		if (pci_resource_flags(pci_dev, i) & IORESOURCE_MEM &&
-				pci_resource_len(pci_dev, i) >= NV_PCI_REGSZ) {
+				pci_resource_len(pci_dev, i) >= np->register_size) {
 			addr = pci_resource_start(pci_dev, i);
 			break;
 		}
@@ -2929,24 +3057,25 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		goto out_relreg;
 	}
 
+	/* copy of driver data */
+	np->driver_data = id->driver_data;
+
 	/* handle different descriptor versions */
 	if (id->driver_data & DEV_HAS_HIGH_DMA) {
 		/* packet format 3: supports 40-bit addressing */
 		np->desc_ver = DESC_VER_3;
+		np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
 		if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
 			printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
 					pci_name(pci_dev));
 		} else {
-			if (pci_set_consistent_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
-				printk(KERN_INFO "forcedeth: 64-bit DMA (consistent) failed for device %s.\n",
-					pci_name(pci_dev));
-				goto out_relreg;
-			} else {
-				dev->features |= NETIF_F_HIGHDMA;
-				printk(KERN_INFO "forcedeth: using HIGHDMA\n");
-			}
+			dev->features |= NETIF_F_HIGHDMA;
+			printk(KERN_INFO "forcedeth: using HIGHDMA\n");
+		}
+		if (pci_set_consistent_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+			printk(KERN_INFO "forcedeth: 64-bit DMA (consistent) failed for device %s.\n",
+			       pci_name(pci_dev));
 		}
-		np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
 	} else if (id->driver_data & DEV_HAS_LARGEDESC) {
 		/* packet format 2: supports jumbo frames */
 		np->desc_ver = DESC_VER_2;
@@ -2986,7 +3115,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	}
 
 	err = -ENOMEM;
-	np->base = ioremap(addr, NV_PCI_REGSZ);
+	np->base = ioremap(addr, np->register_size);
 	if (!np->base)
 		goto out_relreg;
 	dev->base_addr = (unsigned long)np->base;
@@ -3062,6 +3191,20 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	writel(0, base + NvRegWakeUpFlags);
 	np->wolenabled = 0;
 
+	if (id->driver_data & DEV_HAS_POWER_CNTRL) {
+		u8 revision_id;
+		pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id);
+
+		/* take phy and nic out of low power mode */
+		powerstate = readl(base + NvRegPowerState2);
+		powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
+		if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
+		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
+		    revision_id >= 0xA3)
+			powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
+		writel(powerstate, base + NvRegPowerState2);
+	}
+
 	if (np->desc_ver == DESC_VER_1) {
 		np->tx_flags = NV_TX_VALID;
 	} else {
@@ -3223,19 +3366,19 @@ static struct pci_device_id pci_tbl[] = {
 	},
 	{	/* MCP51 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL,
 	},
 	{	/* MCP51 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL,
 	},
 	{	/* MCP55 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL,
 	},
 	{	/* MCP55 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL,
 	},
 	{0,},
 };
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 771e25d8c41..218d31764c5 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -210,7 +210,8 @@ static int gfar_probe(struct platform_device *pdev)
 		goto regs_fail;
 	}
 
-	spin_lock_init(&priv->lock);
+	spin_lock_init(&priv->txlock);
+	spin_lock_init(&priv->rxlock);
 
 	platform_set_drvdata(pdev, dev);
 
@@ -515,11 +516,13 @@ void stop_gfar(struct net_device *dev)
 	phy_stop(priv->phydev);
 
 	/* Lock it down */
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
+	spin_lock(&priv->rxlock);
 
 	gfar_halt(dev);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock(&priv->rxlock);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	/* Free the IRQs */
 	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
@@ -605,14 +608,15 @@ void gfar_start(struct net_device *dev)
 	tempval |= DMACTRL_INIT_SETTINGS;
 	gfar_write(&priv->regs->dmactrl, tempval);
 
-	/* Clear THLT, so that the DMA starts polling now */
-	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
-
 	/* Make sure we aren't stopped */
 	tempval = gfar_read(&priv->regs->dmactrl);
 	tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
 	gfar_write(&priv->regs->dmactrl, tempval);
 
+	/* Clear THLT/RHLT, so that the DMA starts polling now */
+	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
+	gfar_write(&regs->rstat, RSTAT_CLEAR_RHALT);
+
 	/* Unmask the interrupts we look for */
 	gfar_write(&regs->imask, IMASK_DEFAULT);
 }
@@ -928,12 +932,13 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct txfcb *fcb = NULL;
 	struct txbd8 *txbdp;
 	u16 status;
+	unsigned long flags;
 
 	/* Update transmit stats */
 	priv->stats.tx_bytes += skb->len;
 
 	/* Lock priv now */
-	spin_lock_irq(&priv->lock);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	/* Point at the first free tx descriptor */
 	txbdp = priv->cur_tx;
@@ -1004,7 +1009,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
 
 	/* Unlock priv */
-	spin_unlock_irq(&priv->lock);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return 0;
 }
@@ -1049,7 +1054,7 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 	unsigned long flags;
 	u32 tempval;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 
 	priv->vlgrp = grp;
 
@@ -1076,7 +1081,7 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 		gfar_write(&priv->regs->rctrl, tempval);
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 }
 
 
@@ -1085,12 +1090,12 @@ static void gfar_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 
 	if (priv->vlgrp)
 		priv->vlgrp->vlan_devices[vid] = NULL;
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 }
 
 
@@ -1179,7 +1184,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
 	gfar_write(&priv->regs->ievent, IEVENT_TX_MASK);
 
 	/* Lock priv */
-	spin_lock(&priv->lock);
+	spin_lock(&priv->txlock);
 	bdp = priv->dirty_tx;
 	while ((bdp->status & TXBD_READY) == 0) {
 		/* If dirty_tx and cur_tx are the same, then either the */
@@ -1224,7 +1229,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
 	else
 		gfar_write(&priv->regs->txic, 0);
 
-	spin_unlock(&priv->lock);
+	spin_unlock(&priv->txlock);
 
 	return IRQ_HANDLED;
 }
@@ -1305,9 +1310,10 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct net_device *dev = (struct net_device *) dev_id;
 	struct gfar_private *priv = netdev_priv(dev);
-
 #ifdef CONFIG_GFAR_NAPI
 	u32 tempval;
+#else
+	unsigned long flags;
 #endif
 
 	/* Clear IEVENT, so rx interrupt isn't called again
@@ -1330,7 +1336,7 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
 	}
 #else
 
-	spin_lock(&priv->lock);
+	spin_lock_irqsave(&priv->rxlock, flags);
 	gfar_clean_rx_ring(dev, priv->rx_ring_size);
 
 	/* If we are coalescing interrupts, update the timer */
@@ -1341,7 +1347,7 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
 	else
 		gfar_write(&priv->regs->rxic, 0);
 
-	spin_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 #endif
 
 	return IRQ_HANDLED;
@@ -1490,13 +1496,6 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 	/* Update the current rxbd pointer to be the next one */
 	priv->cur_rx = bdp;
 
-	/* If no packets have arrived since the
-	 * last one we processed, clear the IEVENT RX and
-	 * BSY bits so that another interrupt won't be
-	 * generated when we set IMASK */
-	if (bdp->status & RXBD_EMPTY)
-		gfar_write(&priv->regs->ievent, IEVENT_RX_MASK);
-
 	return howmany;
 }
 
@@ -1516,7 +1515,7 @@ static int gfar_poll(struct net_device *dev, int *budget)
 	rx_work_limit -= howmany;
 	*budget -= howmany;
 
-	if (rx_work_limit >= 0) {
+	if (rx_work_limit > 0) {
 		netif_rx_complete(dev);
 
 		/* Clear the halt bit in RSTAT */
@@ -1533,7 +1532,8 @@ static int gfar_poll(struct net_device *dev, int *budget)
 			gfar_write(&priv->regs->rxic, 0);
 	}
 
-	return (rx_work_limit < 0) ? 1 : 0;
+	/* Return 1 if there's more work to do */
+	return (rx_work_limit > 0) ? 0 : 1;
 }
 #endif
 
@@ -1629,7 +1629,7 @@ static void adjust_link(struct net_device *dev)
 	struct phy_device *phydev = priv->phydev;
 	int new_state = 0;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 	if (phydev->link) {
 		u32 tempval = gfar_read(&regs->maccfg2);
 		u32 ecntrl = gfar_read(&regs->ecntrl);
@@ -1694,7 +1694,7 @@ static void adjust_link(struct net_device *dev)
 	if (new_state && netif_msg_link(priv))
 		phy_print_status(phydev);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 }
 
 /* Update the hash table based on the current list of multicast
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index d37d5401be6..127c98cf333 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -656,43 +656,62 @@ struct gfar {
  * the buffer descriptor determines the actual condition.
  */
 struct gfar_private {
-	/* pointers to arrays of skbuffs for tx and rx */
+	/* Fields controlled by TX lock */
+	spinlock_t txlock;
+
+	/* Pointer to the array of skbuffs */
 	struct sk_buff ** tx_skbuff;
-	struct sk_buff ** rx_skbuff;
 
-	/* indices pointing to the next free sbk in skb arrays */
+	/* next free skb in the array */
 	u16 skb_curtx;
-	u16 skb_currx;
 
-	/* index of the first skb which hasn't been transmitted
-	 * yet. */
+	/* First skb in line to be transmitted */
 	u16 skb_dirtytx;
 
 	/* Configuration info for the coalescing features */
 	unsigned char txcoalescing;
 	unsigned short txcount;
 	unsigned short txtime;
+
+	/* Buffer descriptor pointers */
+	struct txbd8 *tx_bd_base;	/* First tx buffer descriptor */
+	struct txbd8 *cur_tx;	        /* Next free ring entry */
+	struct txbd8 *dirty_tx;		/* First buffer in line
+					   to be transmitted */
+	unsigned int tx_ring_size;
+
+	/* RX Locked fields */
+	spinlock_t rxlock;
+
+	/* skb array and index */
+	struct sk_buff ** rx_skbuff;
+	u16 skb_currx;
+
+	/* RX Coalescing values */
 	unsigned char rxcoalescing;
 	unsigned short rxcount;
 	unsigned short rxtime;
 
-	/* GFAR addresses */
-	struct rxbd8 *rx_bd_base;	/* Base addresses of Rx and Tx Buffers */
-	struct txbd8 *tx_bd_base;
+	struct rxbd8 *rx_bd_base;	/* First Rx buffers */
 	struct rxbd8 *cur_rx;           /* Next free rx ring entry */
-	struct txbd8 *cur_tx;	        /* Next free ring entry */
-	struct txbd8 *dirty_tx;		/* The Ring entry to be freed. */
-	struct gfar __iomem *regs;	/* Pointer to the GFAR memory mapped Registers */
-	u32 __iomem *hash_regs[16];
-	int hash_width;
-	struct net_device_stats stats; /* linux network statistics */
-	struct gfar_extra_stats extra_stats;
-	spinlock_t lock;
+
+	/* RX parameters */
+	unsigned int rx_ring_size;
 	unsigned int rx_buffer_size;
 	unsigned int rx_stash_size;
 	unsigned int rx_stash_index;
-	unsigned int tx_ring_size;
-	unsigned int rx_ring_size;
+
+	struct vlan_group *vlgrp;
+
+	/* Unprotected fields */
+	/* Pointer to the GFAR memory mapped Registers */
+	struct gfar __iomem *regs;
+
+	/* Hash registers and their width */
+	u32 __iomem *hash_regs[16];
+	int hash_width;
+
+	/* global parameters */
 	unsigned int fifo_threshold;
 	unsigned int fifo_starve;
 	unsigned int fifo_starve_off;
@@ -702,13 +721,15 @@ struct gfar_private {
 		extended_hash:1,
 		bd_stash_en:1;
 	unsigned short padding;
-	struct vlan_group *vlgrp;
-	/* Info structure initialized by board setup code */
+
 	unsigned int interruptTransmit;
 	unsigned int interruptReceive;
 	unsigned int interruptError;
+
+	/* info structure initialized by platform code */
 	struct gianfar_platform_data *einfo;
 
+	/* PHY stuff */
 	struct phy_device *phydev;
 	struct mii_bus *mii_bus;
 	int oldspeed;
@@ -716,6 +737,10 @@ struct gfar_private {
 	int oldlink;
 
 	uint32_t msg_enable;
+
+	/* Network Statistics */
+	struct net_device_stats stats;
+	struct gfar_extra_stats extra_stats;
 };
 
 static inline u32 gfar_read(volatile unsigned __iomem *addr)
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 5de7b2e259d..d69698c695e 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -455,10 +455,14 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva
 
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->lock, flags);
+		spin_lock_irqsave(&priv->txlock, flags);
+		spin_lock(&priv->rxlock);
+
 		gfar_halt(dev);
 		gfar_clean_rx_ring(dev, priv->rx_ring_size);
-		spin_unlock_irqrestore(&priv->lock, flags);
+
+		spin_unlock(&priv->rxlock);
+		spin_unlock_irqrestore(&priv->txlock, flags);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
@@ -488,10 +492,14 @@ static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
 
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->lock, flags);
+		spin_lock_irqsave(&priv->txlock, flags);
+		spin_lock(&priv->rxlock);
+
 		gfar_halt(dev);
 		gfar_clean_rx_ring(dev, priv->rx_ring_size);
-		spin_unlock_irqrestore(&priv->lock, flags);
+
+		spin_unlock(&priv->rxlock);
+		spin_unlock_irqrestore(&priv->txlock, flags);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
@@ -523,7 +531,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data)
 	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return -EOPNOTSUPP;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 	gfar_halt(dev);
 
 	if (data)
@@ -532,7 +540,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data)
 		dev->features &= ~NETIF_F_IP_CSUM;
 
 	gfar_start(dev);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return 0;
 }
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index 51ef181b136..a6d5c43199c 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -82,7 +82,7 @@ static ssize_t gfar_set_bd_stash(struct class_device *cdev,
 	else
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 
 	/* Set the new stashing value */
 	priv->bd_stash_en = new_setting;
@@ -96,7 +96,7 @@ static ssize_t gfar_set_bd_stash(struct class_device *cdev,
 
 	gfar_write(&priv->regs->attr, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 
 	return count;
 }
@@ -118,7 +118,7 @@ static ssize_t gfar_set_rx_stash_size(struct class_device *cdev,
 	u32 temp;
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 	if (length > priv->rx_buffer_size)
 		return count;
 
@@ -142,7 +142,7 @@ static ssize_t gfar_set_rx_stash_size(struct class_device *cdev,
 
 	gfar_write(&priv->regs->attr, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 
 	return count;
 }
@@ -166,7 +166,7 @@ static ssize_t gfar_set_rx_stash_index(struct class_device *cdev,
 	u32 temp;
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 	if (index > priv->rx_stash_size)
 		return count;
 
@@ -180,7 +180,7 @@ static ssize_t gfar_set_rx_stash_index(struct class_device *cdev,
 	temp |= ATTRELI_EI(index);
 	gfar_write(&priv->regs->attreli, flags);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 
 	return count;
 }
@@ -205,7 +205,7 @@ static ssize_t gfar_set_fifo_threshold(struct class_device *cdev,
 	if (length > GFAR_MAX_FIFO_THRESHOLD)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	priv->fifo_threshold = length;
 
@@ -214,7 +214,7 @@ static ssize_t gfar_set_fifo_threshold(struct class_device *cdev,
 	temp |= length;
 	gfar_write(&priv->regs->fifo_tx_thr, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return count;
 }
@@ -240,7 +240,7 @@ static ssize_t gfar_set_fifo_starve(struct class_device *cdev,
 	if (num > GFAR_MAX_FIFO_STARVE)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	priv->fifo_starve = num;
 
@@ -249,7 +249,7 @@ static ssize_t gfar_set_fifo_starve(struct class_device *cdev,
 	temp |= num;
 	gfar_write(&priv->regs->fifo_tx_starve, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return count;
 }
@@ -274,7 +274,7 @@ static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev,
 	if (num > GFAR_MAX_FIFO_STARVE_OFF)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	priv->fifo_starve_off = num;
 
@@ -283,7 +283,7 @@ static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev,
 	temp |= num;
 	gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return count;
 }
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 79a8fbcf5f9..0d5fccc984b 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -582,7 +582,6 @@ static int __init setup_adapter(int card_base, int type, int n)
 		INIT_WORK(&priv->rx_work, rx_bh, priv);
 		dev->priv = priv;
 		sprintf(dev->name, "dmascc%i", 2 * n + i);
-		SET_MODULE_OWNER(dev);
 		dev->base_addr = card_base;
 		dev->irq = irq;
 		dev->open = scc_open;
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index 6ace0e914fd..5927784df3f 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1550,7 +1550,6 @@ static unsigned char ax25_nocall[AX25_ADDR_LEN] =
 
 static void scc_net_setup(struct net_device *dev)
 {
-	SET_MODULE_OWNER(dev);
 	dev->tx_queue_len    = 16;	/* should be enough... */
 
 	dev->open            = scc_net_open;
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index fe22479eb20..b49884048ca 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -1098,7 +1098,6 @@ static void yam_setup(struct net_device *dev)
 
 	dev->base_addr = yp->iobase;
 	dev->irq = yp->irq;
-	SET_MODULE_OWNER(dev);
 
 	dev->open = yam_open;
 	dev->stop = yam_close;
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 5e6d0075299..cff8598aa80 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -33,7 +33,7 @@ config DONGLE
 
 config ESI_DONGLE
 	tristate "ESI JetEye PC dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Extended Systems
 	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@ config ESI_DONGLE
 
 config ACTISYS_DONGLE
 	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-220L and
 	  IR220L+ dongles.  To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@ config ACTISYS_DONGLE
 
 config TEKRAM_DONGLE
 	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Tekram IrMate 210B
 	  dongle.  To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@ config TEKRAM_DONGLE
 
 config TOIM3232_DONGLE
 	tristate "TOIM3232 IrDa dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Vishay/Temic
 	  TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@ config TOIM3232_DONGLE
 
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Parallax Litelink
 	  dongle.  To compile it as a module, choose M here.  The Parallax
@@ -85,7 +85,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
@@ -132,7 +132,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, choose M here.
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 27ab75f2079..c1ce2398efe 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -46,4 +46,4 @@ obj-$(CONFIG_MA600_DONGLE)	+= ma600-sir.o
 obj-$(CONFIG_TOIM3232_DONGLE)	+= toim3232-sir.o
 
 # The SIR helper module
-sir-dev-objs := sir_dev.o sir_dongle.o sir_kthread.o
+sir-dev-objs := sir_dev.o sir_dongle.o
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 606243d1179..cd87593e4e8 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1778,7 +1778,7 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	if (self->needspatch) {
 		ret = usb_control_msg (self->usbdev, usb_sndctrlpipe (self->usbdev, 0),
-				       0x02, 0x40, 0, 0, 0, 0, msecs_to_jiffies(500));
+				       0x02, 0x40, 0, 0, NULL, 0, 500);
 		if (ret < 0) {
 			IRDA_DEBUG (0, "usb_control_msg failed %d\n", ret);
 			goto err_out_3;
@@ -1815,14 +1815,14 @@ static int irda_usb_probe(struct usb_interface *intf,
 		self->needspatch = (ret < 0);
 		if (ret < 0) {
 			printk("patch_device failed\n");
-			goto err_out_4;
+			goto err_out_5;
 		}
 
 		/* replace IrDA class descriptor with what patched device is now reporting */
 		irda_desc = irda_usb_find_class_desc (self->usbintf);
 		if (irda_desc == NULL) {
 			ret = -ENODEV;
-			goto err_out_4;
+			goto err_out_5;
 		}
 		if (self->irda_desc)
 			kfree (self->irda_desc);
@@ -1832,6 +1832,8 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	return 0;
 
+err_out_5:
+	unregister_netdev(self->netdev);
 err_out_4:
 	kfree(self->speed_buff);
 err_out_3:
diff --git a/drivers/net/irda/sir-dev.h b/drivers/net/irda/sir-dev.h
index f69fb4cec76..9fa294a546d 100644
--- a/drivers/net/irda/sir-dev.h
+++ b/drivers/net/irda/sir-dev.h
@@ -15,23 +15,14 @@
 #define IRDA_SIR_H
 
 #include <linux/netdevice.h>
+#include <linux/workqueue.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irda_device.h>		// iobuff_t
 
-/* FIXME: unify irda_request with sir_fsm! */
-
-struct irda_request {
-	struct list_head lh_request;
-	unsigned long pending;
-	void (*func)(void *);
-	void *data;
-	struct timer_list timer;
-};
-
 struct sir_fsm {
 	struct semaphore	sem;
-	struct irda_request	rq;
+	struct work_struct      work;
 	unsigned		state, substate;
 	int			param;
 	int			result;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index ea7c9464d46..3b5854d10c1 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -23,6 +23,298 @@
 
 #include "sir-dev.h"
 
+
+static struct workqueue_struct *irda_sir_wq;
+
+/* STATE MACHINE */
+
+/* substate handler of the config-fsm to handle the cases where we want
+ * to wait for transmit completion before changing the port configuration
+ */
+
+static int sirdev_tx_complete_fsm(struct sir_dev *dev)
+{
+	struct sir_fsm *fsm = &dev->fsm;
+	unsigned next_state, delay;
+	unsigned bytes_left;
+
+	do {
+		next_state = fsm->substate;	/* default: stay in current substate */
+		delay = 0;
+
+		switch(fsm->substate) {
+
+		case SIRDEV_STATE_WAIT_XMIT:
+			if (dev->drv->chars_in_buffer)
+				bytes_left = dev->drv->chars_in_buffer(dev);
+			else
+				bytes_left = 0;
+			if (!bytes_left) {
+				next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
+				break;
+			}
+
+			if (dev->speed > 115200)
+				delay = (bytes_left*8*10000) / (dev->speed/100);
+			else if (dev->speed > 0)
+				delay = (bytes_left*10*10000) / (dev->speed/100);
+			else
+				delay = 0;
+			/* expected delay (usec) until remaining bytes are sent */
+			if (delay < 100) {
+				udelay(delay);
+				delay = 0;
+				break;
+			}
+			/* sleep some longer delay (msec) */
+			delay = (delay+999) / 1000;
+			break;
+
+		case SIRDEV_STATE_WAIT_UNTIL_SENT:
+			/* block until underlaying hardware buffer are empty */
+			if (dev->drv->wait_until_sent)
+				dev->drv->wait_until_sent(dev);
+			next_state = SIRDEV_STATE_TX_DONE;
+			break;
+
+		case SIRDEV_STATE_TX_DONE:
+			return 0;
+
+		default:
+			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			return -EINVAL;
+		}
+		fsm->substate = next_state;
+	} while (delay == 0);
+	return delay;
+}
+
+/*
+ * Function sirdev_config_fsm
+ *
+ * State machine to handle the configuration of the device (and attached dongle, if any).
+ * This handler is scheduled for execution in kIrDAd context, so we can sleep.
+ * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
+ * long. Instead, for longer delays we start a timer to reschedule us later.
+ * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
+ * Both must be unlocked/restarted on completion - but only on final exit.
+ */
+
+static void sirdev_config_fsm(void *data)
+{
+	struct sir_dev *dev = data;
+	struct sir_fsm *fsm = &dev->fsm;
+	int next_state;
+	int ret = -1;
+	unsigned delay;
+
+	IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+
+	do {
+		IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
+			__FUNCTION__, fsm->state, fsm->substate);
+
+		next_state = fsm->state;
+		delay = 0;
+
+		switch(fsm->state) {
+
+		case SIRDEV_STATE_DONGLE_OPEN:
+			if (dev->dongle_drv != NULL) {
+				ret = sirdev_put_dongle(dev);
+				if (ret) {
+					fsm->result = -EINVAL;
+					next_state = SIRDEV_STATE_ERROR;
+					break;
+				}
+			}
+
+			/* Initialize dongle */
+			ret = sirdev_get_dongle(dev, fsm->param);
+			if (ret) {
+				fsm->result = ret;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+
+			/* Dongles are powered through the modem control lines which
+			 * were just set during open. Before resetting, let's wait for
+			 * the power to stabilize. This is what some dongle drivers did
+			 * in open before, while others didn't - should be safe anyway.
+			 */
+
+			delay = 50;
+			fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+			next_state = SIRDEV_STATE_DONGLE_RESET;
+
+			fsm->param = 9600;
+
+			break;
+
+		case SIRDEV_STATE_DONGLE_CLOSE:
+			/* shouldn't we just treat this as success=? */
+			if (dev->dongle_drv == NULL) {
+				fsm->result = -EINVAL;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+
+			ret = sirdev_put_dongle(dev);
+			if (ret) {
+				fsm->result = ret;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+			next_state = SIRDEV_STATE_DONE;
+			break;
+
+		case SIRDEV_STATE_SET_DTR_RTS:
+			ret = sirdev_set_dtr_rts(dev,
+				(fsm->param&0x02) ? TRUE : FALSE,
+				(fsm->param&0x01) ? TRUE : FALSE);
+			next_state = SIRDEV_STATE_DONE;
+			break;
+
+		case SIRDEV_STATE_SET_SPEED:
+			fsm->substate = SIRDEV_STATE_WAIT_XMIT;
+			next_state = SIRDEV_STATE_DONGLE_CHECK;
+			break;
+
+		case SIRDEV_STATE_DONGLE_CHECK:
+			ret = sirdev_tx_complete_fsm(dev);
+			if (ret < 0) {
+				fsm->result = ret;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+			if ((delay=ret) != 0)
+				break;
+
+			if (dev->dongle_drv) {
+				fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+				next_state = SIRDEV_STATE_DONGLE_RESET;
+			}
+			else {
+				dev->speed = fsm->param;
+				next_state = SIRDEV_STATE_PORT_SPEED;
+			}
+			break;
+
+		case SIRDEV_STATE_DONGLE_RESET:
+			if (dev->dongle_drv->reset) {
+				ret = dev->dongle_drv->reset(dev);
+				if (ret < 0) {
+					fsm->result = ret;
+					next_state = SIRDEV_STATE_ERROR;
+					break;
+				}
+			}
+			else
+				ret = 0;
+			if ((delay=ret) == 0) {
+				/* set serial port according to dongle default speed */
+				if (dev->drv->set_speed)
+					dev->drv->set_speed(dev, dev->speed);
+				fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
+				next_state = SIRDEV_STATE_DONGLE_SPEED;
+			}
+			break;
+
+		case SIRDEV_STATE_DONGLE_SPEED:
+			if (dev->dongle_drv->reset) {
+				ret = dev->dongle_drv->set_speed(dev, fsm->param);
+				if (ret < 0) {
+					fsm->result = ret;
+					next_state = SIRDEV_STATE_ERROR;
+					break;
+				}
+			}
+			else
+				ret = 0;
+			if ((delay=ret) == 0)
+				next_state = SIRDEV_STATE_PORT_SPEED;
+			break;
+
+		case SIRDEV_STATE_PORT_SPEED:
+			/* Finally we are ready to change the serial port speed */
+			if (dev->drv->set_speed)
+				dev->drv->set_speed(dev, dev->speed);
+			dev->new_speed = 0;
+			next_state = SIRDEV_STATE_DONE;
+			break;
+
+		case SIRDEV_STATE_DONE:
+			/* Signal network layer so it can send more frames */
+			netif_wake_queue(dev->netdev);
+			next_state = SIRDEV_STATE_COMPLETE;
+			break;
+
+		default:
+			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			fsm->result = -EINVAL;
+			/* fall thru */
+
+		case SIRDEV_STATE_ERROR:
+			IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+
+#if 0	/* don't enable this before we have netdev->tx_timeout to recover */
+			netif_stop_queue(dev->netdev);
+#else
+			netif_wake_queue(dev->netdev);
+#endif
+			/* fall thru */
+
+		case SIRDEV_STATE_COMPLETE:
+			/* config change finished, so we are not busy any longer */
+			sirdev_enable_rx(dev);
+			up(&fsm->sem);
+			return;
+		}
+		fsm->state = next_state;
+	} while(!delay);
+
+	queue_delayed_work(irda_sir_wq, &fsm->work, msecs_to_jiffies(delay));
+}
+
+/* schedule some device configuration task for execution by kIrDAd
+ * on behalf of the above state machine.
+ * can be called from process or interrupt/tasklet context.
+ */
+
+int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
+{
+	struct sir_fsm *fsm = &dev->fsm;
+
+	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+
+	if (down_trylock(&fsm->sem)) {
+		if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
+			IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+			return -EWOULDBLOCK;
+		} else
+			down(&fsm->sem);
+	}
+
+	if (fsm->state == SIRDEV_STATE_DEAD) {
+		/* race with sirdev_close should never happen */
+		IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+		up(&fsm->sem);
+		return -ESTALE;		/* or better EPIPE? */
+	}
+
+	netif_stop_queue(dev->netdev);
+	atomic_set(&dev->enable_rx, 0);
+
+	fsm->state = initial_state;
+	fsm->param = param;
+	fsm->result = 0;
+
+	INIT_WORK(&fsm->work, sirdev_config_fsm, dev);
+	queue_work(irda_sir_wq, &fsm->work);
+	return 0;
+}
+
+
 /***************************************************************************/
 
 void sirdev_enable_rx(struct sir_dev *dev)
@@ -619,10 +911,6 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	spin_lock_init(&dev->tx_lock);
 	init_MUTEX(&dev->fsm.sem);
 
-	INIT_LIST_HEAD(&dev->fsm.rq.lh_request);
-	dev->fsm.rq.pending = 0;
-	init_timer(&dev->fsm.rq.timer);
-
 	dev->drv = drv;
 	dev->netdev = ndev;
 
@@ -682,3 +970,22 @@ int sirdev_put_instance(struct sir_dev *dev)
 }
 EXPORT_SYMBOL(sirdev_put_instance);
 
+static int __init sir_wq_init(void)
+{
+	irda_sir_wq = create_singlethread_workqueue("irda_sir_wq");
+	if (!irda_sir_wq)
+		return -ENOMEM;
+	return 0;
+}
+
+static void __exit sir_wq_exit(void)
+{
+	destroy_workqueue(irda_sir_wq);
+}
+
+module_init(sir_wq_init);
+module_exit(sir_wq_exit);
+
+MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
+MODULE_DESCRIPTION("IrDA SIR core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/sir_kthread.c b/drivers/net/irda/sir_kthread.c
deleted file mode 100644
index e3904d6bfec..00000000000
--- a/drivers/net/irda/sir_kthread.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*********************************************************************
- *
- *	sir_kthread.c:		dedicated thread to process scheduled
- *				sir device setup requests
- *
- *	Copyright (c) 2002 Martin Diehl
- *
- *	This program is free software; you can redistribute it and/or 
- *	modify it under the terms of the GNU General Public License as 
- *	published by the Free Software Foundation; either version 2 of 
- *	the License, or (at your option) any later version.
- *
- ********************************************************************/    
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-
-#include <net/irda/irda.h>
-
-#include "sir-dev.h"
-
-/**************************************************************************
- *
- * kIrDAd kernel thread and config state machine
- *
- */
-
-struct irda_request_queue {
-	struct list_head request_list;
-	spinlock_t lock;
-	task_t *thread;
-	struct completion exit;
-	wait_queue_head_t kick, done;
-	atomic_t num_pending;
-};
-
-static struct irda_request_queue irda_rq_queue;
-
-static int irda_queue_request(struct irda_request *rq)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	if (!test_and_set_bit(0, &rq->pending)) {
-		spin_lock_irqsave(&irda_rq_queue.lock, flags);
-		list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
-		wake_up(&irda_rq_queue.kick);
-		atomic_inc(&irda_rq_queue.num_pending);
-		spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-		ret = 1;
-	}
-	return ret;
-}
-
-static void irda_request_timer(unsigned long data)
-{
-	struct irda_request *rq = (struct irda_request *)data;
-	unsigned long flags;
-	
-	spin_lock_irqsave(&irda_rq_queue.lock, flags);
-	list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
-	wake_up(&irda_rq_queue.kick);
-	spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}
-
-static int irda_queue_delayed_request(struct irda_request *rq, unsigned long delay)
-{
-	int ret = 0;
-	struct timer_list *timer = &rq->timer;
-
-	if (!test_and_set_bit(0, &rq->pending)) {
-		timer->expires = jiffies + delay;
-		timer->function = irda_request_timer;
-		timer->data = (unsigned long)rq;
-		atomic_inc(&irda_rq_queue.num_pending);
-		add_timer(timer);
-		ret = 1;
-	}
-	return ret;
-}
-
-static void run_irda_queue(void)
-{
-	unsigned long flags;
-	struct list_head *entry, *tmp;
-	struct irda_request *rq;
-
-	spin_lock_irqsave(&irda_rq_queue.lock, flags);
-	list_for_each_safe(entry, tmp, &irda_rq_queue.request_list) {
-		rq = list_entry(entry, struct irda_request, lh_request);
-		list_del_init(entry);
-		spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-
-		clear_bit(0, &rq->pending);
-		rq->func(rq->data);
-
-		if (atomic_dec_and_test(&irda_rq_queue.num_pending))
-			wake_up(&irda_rq_queue.done);
-
-		spin_lock_irqsave(&irda_rq_queue.lock, flags);
-	}
-	spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}		
-
-static int irda_thread(void *startup)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-	daemonize("kIrDAd");
-
-	irda_rq_queue.thread = current;
-
-	complete((struct completion *)startup);
-
-	while (irda_rq_queue.thread != NULL) {
-
-		/* We use TASK_INTERRUPTIBLE, rather than
-		 * TASK_UNINTERRUPTIBLE.  Andrew Morton made this
-		 * change ; he told me that it is safe, because "signal
-		 * blocking is now handled in daemonize()", he added
-		 * that the problem is that "uninterruptible sleep
-		 * contributes to load average", making user worry.
-		 * Jean II */
-		set_task_state(current, TASK_INTERRUPTIBLE);
-		add_wait_queue(&irda_rq_queue.kick, &wait);
-		if (list_empty(&irda_rq_queue.request_list))
-			schedule();
-		else
-			__set_task_state(current, TASK_RUNNING);
-		remove_wait_queue(&irda_rq_queue.kick, &wait);
-
-		/* make swsusp happy with our thread */
-		try_to_freeze();
-
-		run_irda_queue();
-	}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,35)
-	reparent_to_init();
-#endif
-	complete_and_exit(&irda_rq_queue.exit, 0);
-	/* never reached */
-	return 0;
-}
-
-
-static void flush_irda_queue(void)
-{
-	if (atomic_read(&irda_rq_queue.num_pending)) {
-
-		DECLARE_WAITQUEUE(wait, current);
-
-		if (!list_empty(&irda_rq_queue.request_list))
-			run_irda_queue();
-
-		set_task_state(current, TASK_UNINTERRUPTIBLE);
-		add_wait_queue(&irda_rq_queue.done, &wait);
-		if (atomic_read(&irda_rq_queue.num_pending))
-			schedule();
-		else
-			__set_task_state(current, TASK_RUNNING);
-		remove_wait_queue(&irda_rq_queue.done, &wait);
-	}
-}
-
-/* substate handler of the config-fsm to handle the cases where we want
- * to wait for transmit completion before changing the port configuration
- */
-
-static int irda_tx_complete_fsm(struct sir_dev *dev)
-{
-	struct sir_fsm *fsm = &dev->fsm;
-	unsigned next_state, delay;
-	unsigned bytes_left;
-
-	do {
-		next_state = fsm->substate;	/* default: stay in current substate */
-		delay = 0;
-
-		switch(fsm->substate) {
-
-		case SIRDEV_STATE_WAIT_XMIT:
-			if (dev->drv->chars_in_buffer)
-				bytes_left = dev->drv->chars_in_buffer(dev);
-			else
-				bytes_left = 0;
-			if (!bytes_left) {
-				next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
-				break;
-			}
-
-			if (dev->speed > 115200)
-				delay = (bytes_left*8*10000) / (dev->speed/100);
-			else if (dev->speed > 0)
-				delay = (bytes_left*10*10000) / (dev->speed/100);
-			else
-				delay = 0;
-			/* expected delay (usec) until remaining bytes are sent */
-			if (delay < 100) {
-				udelay(delay);
-				delay = 0;
-				break;
-			}
-			/* sleep some longer delay (msec) */
-			delay = (delay+999) / 1000;
-			break;
-
-		case SIRDEV_STATE_WAIT_UNTIL_SENT:
-			/* block until underlaying hardware buffer are empty */
-			if (dev->drv->wait_until_sent)
-				dev->drv->wait_until_sent(dev);
-			next_state = SIRDEV_STATE_TX_DONE;
-			break;
-
-		case SIRDEV_STATE_TX_DONE:
-			return 0;
-
-		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
-			return -EINVAL;
-		}
-		fsm->substate = next_state;
-	} while (delay == 0);
-	return delay;
-}
-
-/*
- * Function irda_config_fsm
- *
- * State machine to handle the configuration of the device (and attached dongle, if any).
- * This handler is scheduled for execution in kIrDAd context, so we can sleep.
- * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
- * long. Instead, for longer delays we start a timer to reschedule us later.
- * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
- * Both must be unlocked/restarted on completion - but only on final exit.
- */
-
-static void irda_config_fsm(void *data)
-{
-	struct sir_dev *dev = data;
-	struct sir_fsm *fsm = &dev->fsm;
-	int next_state;
-	int ret = -1;
-	unsigned delay;
-
-	IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies); 
-
-	do {
-		IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
-			__FUNCTION__, fsm->state, fsm->substate);
-
-		next_state = fsm->state;
-		delay = 0;
-
-		switch(fsm->state) {
-
-		case SIRDEV_STATE_DONGLE_OPEN:
-			if (dev->dongle_drv != NULL) {
-				ret = sirdev_put_dongle(dev);
-				if (ret) {
-					fsm->result = -EINVAL;
-					next_state = SIRDEV_STATE_ERROR;
-					break;
-				}
-			}
-
-			/* Initialize dongle */
-			ret = sirdev_get_dongle(dev, fsm->param);
-			if (ret) {
-				fsm->result = ret;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-
-			/* Dongles are powered through the modem control lines which
-			 * were just set during open. Before resetting, let's wait for
-			 * the power to stabilize. This is what some dongle drivers did
-			 * in open before, while others didn't - should be safe anyway.
-			 */
-
-			delay = 50;
-			fsm->substate = SIRDEV_STATE_DONGLE_RESET;
-			next_state = SIRDEV_STATE_DONGLE_RESET;
-
-			fsm->param = 9600;
-
-			break;
-
-		case SIRDEV_STATE_DONGLE_CLOSE:
-			/* shouldn't we just treat this as success=? */
-			if (dev->dongle_drv == NULL) {
-				fsm->result = -EINVAL;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-
-			ret = sirdev_put_dongle(dev);
-			if (ret) {
-				fsm->result = ret;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-			next_state = SIRDEV_STATE_DONE;
-			break;
-
-		case SIRDEV_STATE_SET_DTR_RTS:
-			ret = sirdev_set_dtr_rts(dev,
-				(fsm->param&0x02) ? TRUE : FALSE,
-				(fsm->param&0x01) ? TRUE : FALSE);
-			next_state = SIRDEV_STATE_DONE;
-			break;
-
-		case SIRDEV_STATE_SET_SPEED:
-			fsm->substate = SIRDEV_STATE_WAIT_XMIT;
-			next_state = SIRDEV_STATE_DONGLE_CHECK;
-			break;
-
-		case SIRDEV_STATE_DONGLE_CHECK:
-			ret = irda_tx_complete_fsm(dev);
-			if (ret < 0) {
-				fsm->result = ret;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-			if ((delay=ret) != 0)
-				break;
-
-			if (dev->dongle_drv) {
-				fsm->substate = SIRDEV_STATE_DONGLE_RESET;
-				next_state = SIRDEV_STATE_DONGLE_RESET;
-			}
-			else {
-				dev->speed = fsm->param;
-				next_state = SIRDEV_STATE_PORT_SPEED;
-			}
-			break;
-
-		case SIRDEV_STATE_DONGLE_RESET:
-			if (dev->dongle_drv->reset) {
-				ret = dev->dongle_drv->reset(dev);	
-				if (ret < 0) {
-					fsm->result = ret;
-					next_state = SIRDEV_STATE_ERROR;
-					break;
-				}
-			}
-			else
-				ret = 0;
-			if ((delay=ret) == 0) {
-				/* set serial port according to dongle default speed */
-				if (dev->drv->set_speed)
-					dev->drv->set_speed(dev, dev->speed);
-				fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
-				next_state = SIRDEV_STATE_DONGLE_SPEED;
-			}
-			break;
-
-		case SIRDEV_STATE_DONGLE_SPEED:				
-			if (dev->dongle_drv->reset) {
-				ret = dev->dongle_drv->set_speed(dev, fsm->param);
-				if (ret < 0) {
-					fsm->result = ret;
-					next_state = SIRDEV_STATE_ERROR;
-					break;
-				}
-			}
-			else
-				ret = 0;
-			if ((delay=ret) == 0)
-				next_state = SIRDEV_STATE_PORT_SPEED;
-			break;
-
-		case SIRDEV_STATE_PORT_SPEED:
-			/* Finally we are ready to change the serial port speed */
-			if (dev->drv->set_speed)
-				dev->drv->set_speed(dev, dev->speed);
-			dev->new_speed = 0;
-			next_state = SIRDEV_STATE_DONE;
-			break;
-
-		case SIRDEV_STATE_DONE:
-			/* Signal network layer so it can send more frames */
-			netif_wake_queue(dev->netdev);
-			next_state = SIRDEV_STATE_COMPLETE;
-			break;
-
-		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
-			fsm->result = -EINVAL;
-			/* fall thru */
-
-		case SIRDEV_STATE_ERROR:
-			IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
-
-#if 0	/* don't enable this before we have netdev->tx_timeout to recover */
-			netif_stop_queue(dev->netdev);
-#else
-			netif_wake_queue(dev->netdev);
-#endif
-			/* fall thru */
-
-		case SIRDEV_STATE_COMPLETE:
-			/* config change finished, so we are not busy any longer */
-			sirdev_enable_rx(dev);
-			up(&fsm->sem);
-			return;
-		}
-		fsm->state = next_state;
-	} while(!delay);
-
-	irda_queue_delayed_request(&fsm->rq, msecs_to_jiffies(delay));
-}
-
-/* schedule some device configuration task for execution by kIrDAd
- * on behalf of the above state machine.
- * can be called from process or interrupt/tasklet context.
- */
-
-int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
-{
-	struct sir_fsm *fsm = &dev->fsm;
-	int xmit_was_down;
-
-	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
-
-	if (down_trylock(&fsm->sem)) {
-		if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
-			IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
-			return -EWOULDBLOCK;
-		} else
-			down(&fsm->sem);
-	}
-
-	if (fsm->state == SIRDEV_STATE_DEAD) {
-		/* race with sirdev_close should never happen */
-		IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
-		up(&fsm->sem);
-		return -ESTALE;		/* or better EPIPE? */
-	}
-
-	xmit_was_down = netif_queue_stopped(dev->netdev);
-	netif_stop_queue(dev->netdev);
-	atomic_set(&dev->enable_rx, 0);
-
-	fsm->state = initial_state;
-	fsm->param = param;
-	fsm->result = 0;
-
-	INIT_LIST_HEAD(&fsm->rq.lh_request);
-	fsm->rq.pending = 0;
-	fsm->rq.func = irda_config_fsm;
-	fsm->rq.data = dev;
-
-	if (!irda_queue_request(&fsm->rq)) {	/* returns 0 on error! */
-		atomic_set(&dev->enable_rx, 1);
-		if (!xmit_was_down)
-			netif_wake_queue(dev->netdev);		
-		up(&fsm->sem);
-		return -EAGAIN;
-	}
-	return 0;
-}
-
-static int __init irda_thread_create(void)
-{
-	struct completion startup;
-	int pid;
-
-	spin_lock_init(&irda_rq_queue.lock);
-	irda_rq_queue.thread = NULL;
-	INIT_LIST_HEAD(&irda_rq_queue.request_list);
-	init_waitqueue_head(&irda_rq_queue.kick);
-	init_waitqueue_head(&irda_rq_queue.done);
-	atomic_set(&irda_rq_queue.num_pending, 0);
-
-	init_completion(&startup);
-	pid = kernel_thread(irda_thread, &startup, CLONE_FS|CLONE_FILES);
-	if (pid <= 0)
-		return -EAGAIN;
-	else
-		wait_for_completion(&startup);
-
-	return 0;
-}
-
-static void __exit irda_thread_join(void)
-{
-	if (irda_rq_queue.thread) {
-		flush_irda_queue();
-		init_completion(&irda_rq_queue.exit);
-		irda_rq_queue.thread = NULL;
-		wake_up(&irda_rq_queue.kick);		
-		wait_for_completion(&irda_rq_queue.exit);
-	}
-}
-
-module_init(irda_thread_create);
-module_exit(irda_thread_join);
-
-MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
-MODULE_DESCRIPTION("IrDA SIR core");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index bbcfc8ec35a..a4674044bd6 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -54,6 +54,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/serial_reg.h>
 #include <linux/dma-mapping.h>
+#include <linux/pnp.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -225,6 +226,8 @@ static int __init smsc_superio_lpc(unsigned short cfg_base);
 #ifdef CONFIG_PCI
 static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
 static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static void __init preconfigure_ali_port(struct pci_dev *dev,
+					 unsigned short port);
 static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 						    unsigned short ircc_fir,
@@ -356,6 +359,16 @@ static inline void register_bank(int iobase, int bank)
                iobase + IRCC_MASTER);
 }
 
+#ifdef	CONFIG_PNP
+/* PNP hotplug support */
+static const struct pnp_device_id smsc_ircc_pnp_table[] = {
+	{ .id = "SMCf010", .driver_data = 0 },
+	/* and presumably others */
+	{ }
+};
+MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
+#endif
+
 
 /*******************************************************************************
  *
@@ -2070,7 +2083,8 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
 
 /* PROBING
  *
- *
+ * REVISIT we can be told about the device by PNP, and should use that info
+ * instead of probing hardware and creating a platform_device ...
  */
 
 static int __init smsc_ircc_look_for_chips(void)
@@ -2327,9 +2341,14 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
  * pre-configuration not properly done by the BIOS (especially laptops)
  * This code is based in part on smcinit.c, tosh1800-smcinit.c
  * and tosh2450-smcinit.c. The table lists the device entries
- * for ISA bridges with an LPC (Local Peripheral Configurator)
- * that are in turn used to configure the SMSC device with default
- * SIR and FIR I/O ports, DMA and IRQ.
+ * for ISA bridges with an LPC (Low Pin Count) controller which
+ * handles the communication with the SMSC device. After the LPC
+ * controller is initialized through PCI, the SMSC device is initialized
+ * through a dedicated port in the ISA port-mapped I/O area, this latter
+ * area is used to configure the SMSC device with default
+ * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
+ * used different sets of parameters and different control port
+ * addresses making a subsystem device table necessary.
  */
 #ifdef CONFIG_PCI
 #define PCIID_VENDOR_INTEL 0x8086
@@ -2340,9 +2359,10 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
 		.device = 0x24cc,
 		.subvendor = 0x103c,
 		.subdevice = 0x088c,
-		.sir_io = 0x02f8, /* Quite certain these are the same for nc8000 as for nc6000 */
+		/* Quite certain these are the same for nc8000 as for nc6000 */
+		.sir_io = 0x02f8,
 		.fir_io = 0x0130,
-		.fir_irq = 0x09,
+		.fir_irq = 0x05,
 		.fir_dma = 0x03,
 		.cfg_base = 0x004e,
 		.preconfigure = preconfigure_through_82801,
@@ -2355,60 +2375,79 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
 		.subdevice = 0x0890,
 		.sir_io = 0x02f8,
 		.fir_io = 0x0130,
-		.fir_irq = 0x09,
+		.fir_irq = 0x05,
 		.fir_dma = 0x03,
 		.cfg_base = 0x004e,
 		.preconfigure = preconfigure_through_82801,
 		.name = "HP nc6000",
 	},
 	{
-		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
+		/* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
+		.vendor = PCIID_VENDOR_INTEL,
 		.device = 0x24c0,
 		.subvendor = 0x1179,
-		.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+		.subdevice = 0xffff, /* 0xffff is "any" */
 		.sir_io = 0x03f8,
 		.fir_io = 0x0130,
 		.fir_irq = 0x07,
 		.fir_dma = 0x01,
 		.cfg_base = 0x002e,
 		.preconfigure = preconfigure_through_82801,
-		.name = "Toshiba Satellite 2450",
+		.name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
 	},
 	{
 		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
-		.device = 0x248c, /* Some use 24cc? */
+		.device = 0x248c,
+		.subvendor = 0x1179,
+		.subdevice = 0xffff, /* 0xffff is "any" */
+		.sir_io = 0x03f8,
+		.fir_io = 0x0130,
+		.fir_irq = 0x03,
+		.fir_dma = 0x03,
+		.cfg_base = 0x002e,
+		.preconfigure = preconfigure_through_82801,
+		.name = "Toshiba laptop with Intel 82801CAM ISA bridge",
+	},
+	{
+		/* 82801DBM (ICH4-M) LPC Interface Bridge */
+		.vendor = PCIID_VENDOR_INTEL,
+		.device = 0x24cc,
 		.subvendor = 0x1179,
-		.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+		.subdevice = 0xffff, /* 0xffff is "any" */
 		.sir_io = 0x03f8,
 		.fir_io = 0x0130,
 		.fir_irq = 0x03,
 		.fir_dma = 0x03,
 		.cfg_base = 0x002e,
 		.preconfigure = preconfigure_through_82801,
-		.name = "Toshiba Satellite 5100/5200, Tecra 9100",
+		.name = "Toshiba laptop with Intel 8281DBM LPC bridge",
 	},
 	{
-		.vendor = PCIID_VENDOR_ALI, /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
+		/* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
+		.vendor = PCIID_VENDOR_ALI,
 		.device = 0x1533,
 		.subvendor = 0x1179,
-		.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+		.subdevice = 0xffff, /* 0xffff is "any" */
 		.sir_io = 0x02e8,
 		.fir_io = 0x02f8,
 		.fir_irq = 0x07,
 		.fir_dma = 0x03,
 		.cfg_base = 0x002e,
 		.preconfigure = preconfigure_through_ali,
-		.name = "Toshiba Satellite 1800",
+		.name = "Toshiba laptop with ALi ISA bridge",
 	},
 	{ } // Terminator
 };
 
 
 /*
- * This sets up the basic SMSC parameters (FIR port, SIR port, FIR DMA, FIR IRQ)
+ * This sets up the basic SMSC parameters
+ * (FIR port, SIR port, FIR DMA, FIR IRQ)
  * through the chip configuration port.
  */
-static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf)
+static int __init preconfigure_smsc_chip(struct
+					 smsc_ircc_subsystem_configuration
+					 *conf)
 {
 	unsigned short iobase = conf->cfg_base;
 	unsigned char tmpbyte;
@@ -2416,7 +2455,9 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 	outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
 	outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
 	tmpbyte = inb(iobase +1); // Read device ID
-	IRDA_DEBUG(0, "Detected Chip id: 0x%02x, setting up registers...\n",tmpbyte);
+	IRDA_DEBUG(0,
+		   "Detected Chip id: 0x%02x, setting up registers...\n",
+		   tmpbyte);
 
 	/* Disable UART1 and set up SIR I/O port */
 	outb(0x24, iobase);  // select CR24 - UART1 base addr
@@ -2426,6 +2467,7 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 	tmpbyte = inb(iobase + 1);
 	if (tmpbyte != (conf->sir_io >> 2) ) {
 		IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
+		IRDA_WARNING("Try to supply ircc_cfg argument.\n");
 		return -ENXIO;
 	}
 
@@ -2461,7 +2503,8 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 
 	outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase);  // CR0C - UART mode
 	tmpbyte = inb(iobase + 1);
-	tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | SMSCSIOFLAT_UART2MODE_VAL_IRDA;
+	tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
+		SMSCSIOFLAT_UART2MODE_VAL_IRDA;
 	outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
 
 	outb(LPC47N227_APMBOOTDRIVE_REG, iobase);  // CR07 - Auto Pwr Mgt/boot drive sel
@@ -2486,53 +2529,226 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 	return 0;
 }
 
-/* 82801CAM registers */
+/* 82801CAM generic registers */
 #define VID 0x00
 #define DID 0x02
-#define PIRQA_ROUT 0x60
+#define PIRQ_A_D_ROUT 0x60
+#define SIRQ_CNTL 0x64
+#define PIRQ_E_H_ROUT 0x68
 #define PCI_DMA_C 0x90
+/* LPC-specific registers */
 #define COM_DEC 0xe0
+#define GEN1_DEC 0xe4
 #define LPC_EN 0xe6
 #define GEN2_DEC 0xec
 /*
- * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge or
- * Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. They all work the same way!
+ * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
+ * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
+ * They all work the same way!
  */
 static int __init preconfigure_through_82801(struct pci_dev *dev,
-				  struct smsc_ircc_subsystem_configuration *conf)
+					     struct
+					     smsc_ircc_subsystem_configuration
+					     *conf)
 {
 	unsigned short tmpword;
-	int ret;
+	unsigned char tmpbyte;
 
-	IRDA_MESSAGE("Setting up the SMSC device via the 82801 controller.\n");
-	pci_write_config_byte(dev, COM_DEC, 0x10);
+	IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
+	/*
+	 * Select the range for the COMA COM port (SIR)
+	 * Register COM_DEC:
+	 * Bit 7: reserved
+	 * Bit 6-4, COMB decode range
+	 * Bit 3: reserved
+	 * Bit 2-0, COMA decode range
+	 *
+	 * Decode ranges:
+	 *   000 = 0x3f8-0x3ff (COM1)
+	 *   001 = 0x2f8-0x2ff (COM2)
+	 *   010 = 0x220-0x227
+	 *   011 = 0x228-0x22f
+	 *   100 = 0x238-0x23f
+	 *   101 = 0x2e8-0x2ef (COM4)
+	 *   110 = 0x338-0x33f
+	 *   111 = 0x3e8-0x3ef (COM3)
+	 */
+	pci_read_config_byte(dev, COM_DEC, &tmpbyte);
+	tmpbyte &= 0xf8; /* mask COMA bits */
+	switch(conf->sir_io) {
+	case 0x3f8:
+		tmpbyte |= 0x00;
+		break;
+	case 0x2f8:
+		tmpbyte |= 0x01;
+		break;
+	case 0x220:
+		tmpbyte |= 0x02;
+		break;
+	case 0x228:
+		tmpbyte |= 0x03;
+		break;
+	case 0x238:
+		tmpbyte |= 0x04;
+		break;
+	case 0x2e8:
+		tmpbyte |= 0x05;
+		break;
+	case 0x338:
+		tmpbyte |= 0x06;
+		break;
+	case 0x3e8:
+		tmpbyte |= 0x07;
+		break;
+	default:
+		tmpbyte |= 0x01; /* COM2 default */
+	}
+	IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
+	pci_write_config_byte(dev, COM_DEC, tmpbyte);
 
-	/* Enable LPC */
-	pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
-	tmpword &= 0xfffd; /* mask bit 1 */
-	tmpword |= 0x0001; /* set bit 0 : COMA addr range enable */
+	/* Enable Low Pin Count interface */
+	pci_read_config_word(dev, LPC_EN, &tmpword);
+	/* These seem to be set up at all times,
+	 * just make sure it is properly set.
+	 */
+	switch(conf->cfg_base) {
+	case 0x04e:
+		tmpword |= 0x2000;
+		break;
+	case 0x02e:
+		tmpword |= 0x1000;
+		break;
+	case 0x062:
+		tmpword |= 0x0800;
+		break;
+	case 0x060:
+		tmpword |= 0x0400;
+		break;
+	default:
+		IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
+			     conf->cfg_base);
+		break;
+	}
+	tmpword &= 0xfffd; /* disable LPC COMB */
+	tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
+	IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
 	pci_write_config_word(dev, LPC_EN, tmpword);
 
-	/* Setup DMA */
-	pci_write_config_word(dev, PCI_DMA_C, 0xc0c0); /* LPC I/F DMA on, channel 3  -- rtm (?? PCI DMA ?) */
-	pci_write_config_word(dev, GEN2_DEC, 0x131); /* LPC I/F 2nd decode range */
+	/*
+	 * Configure LPC DMA channel
+	 * PCI_DMA_C bits:
+	 * Bit 15-14: DMA channel 7 select
+	 * Bit 13-12: DMA channel 6 select
+	 * Bit 11-10: DMA channel 5 select
+	 * Bit 9-8:   Reserved
+	 * Bit 7-6:   DMA channel 3 select
+	 * Bit 5-4:   DMA channel 2 select
+	 * Bit 3-2:   DMA channel 1 select
+	 * Bit 1-0:   DMA channel 0 select
+	 *  00 = Reserved value
+	 *  01 = PC/PCI DMA
+	 *  10 = Reserved value
+	 *  11 = LPC I/F DMA
+	 */
+	pci_read_config_word(dev, PCI_DMA_C, &tmpword);
+	switch(conf->fir_dma) {
+	case 0x07:
+		tmpword |= 0xc000;
+		break;
+	case 0x06:
+		tmpword |= 0x3000;
+		break;
+	case 0x05:
+		tmpword |= 0x0c00;
+		break;
+	case 0x03:
+		tmpword |= 0x00c0;
+		break;
+	case 0x02:
+		tmpword |= 0x0030;
+		break;
+	case 0x01:
+		tmpword |= 0x000c;
+		break;
+	case 0x00:
+		tmpword |= 0x0003;
+		break;
+	default:
+		break; /* do not change settings */
+	}
+	IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
+	pci_write_config_word(dev, PCI_DMA_C, tmpword);
+
+	/*
+	 * GEN2_DEC bits:
+	 * Bit 15-4: Generic I/O range
+	 * Bit 3-1: reserved (read as 0)
+	 * Bit 0: enable GEN2 range on LPC I/F
+	 */
+	tmpword = conf->fir_io & 0xfff8;
+	tmpword |= 0x0001;
+	IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
+	pci_write_config_word(dev, GEN2_DEC, tmpword);
 
 	/* Pre-configure chip */
-	ret = preconfigure_smsc_chip(conf);
+	return preconfigure_smsc_chip(conf);
+}
 
-	/* Disable LPC */
-	pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
-	tmpword &= 0xfffc; /* mask bit 1 and bit 0, COMA addr range disable */
-	pci_write_config_word(dev, LPC_EN, tmpword);
-	return ret;
+/*
+ * Pre-configure a certain port on the ALi 1533 bridge.
+ * This is based on reverse-engineering since ALi does not
+ * provide any data sheet for the 1533 chip.
+ */
+static void __init preconfigure_ali_port(struct pci_dev *dev,
+					 unsigned short port)
+{
+	unsigned char reg;
+	/* These bits obviously control the different ports */
+	unsigned char mask;
+	unsigned char tmpbyte;
+
+	switch(port) {
+	case 0x0130:
+	case 0x0178:
+		reg = 0xb0;
+		mask = 0x80;
+		break;
+	case 0x03f8:
+		reg = 0xb4;
+		mask = 0x80;
+		break;
+	case 0x02f8:
+		reg = 0xb4;
+		mask = 0x30;
+		break;
+	case 0x02e8:
+		reg = 0xb4;
+		mask = 0x08;
+		break;
+	default:
+		IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
+		return;
+	}
+
+	pci_read_config_byte(dev, reg, &tmpbyte);
+	/* Turn on the right bits */
+	tmpbyte |= mask;
+	pci_write_config_byte(dev, reg, tmpbyte);
+	IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
+	return;
 }
 
 static int __init preconfigure_through_ali(struct pci_dev *dev,
-				  struct smsc_ircc_subsystem_configuration *conf)
+					   struct
+					   smsc_ircc_subsystem_configuration
+					   *conf)
 {
-	/* TODO: put in ALi 1533 configuration here. */
-	IRDA_MESSAGE("SORRY: %s has an unsupported bridge controller (ALi): not pre-configured.\n", conf->name);
-	return -ENODEV;
+	/* Configure the two ports on the ALi 1533 */
+	preconfigure_ali_port(dev, conf->sir_io);
+	preconfigure_ali_port(dev, conf->fir_io);
+
+	/* Pre-configure chip */
+	return preconfigure_smsc_chip(conf);
 }
 
 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
@@ -2552,9 +2768,10 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 		struct smsc_ircc_subsystem_configuration *conf;
 
 		/*
-		 * Cache the subsystem vendor/device: some manufacturers fail to set
-		 * this for all components, so we save it in case there is just
-		 * 0x0000 0x0000 on the device we want to check.
+		 * Cache the subsystem vendor/device:
+		 * some manufacturers fail to set this for all components,
+		 * so we save it in case there is just 0x0000 0x0000 on the
+		 * device we want to check.
 		 */
 		if (dev->subsystem_vendor != 0x0000U) {
 			ss_vendor = dev->subsystem_vendor;
@@ -2564,13 +2781,20 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 		for( ; conf->subvendor; conf++) {
 			if(conf->vendor == dev->vendor &&
 			   conf->device == dev->device &&
-			   conf->subvendor == ss_vendor && /* Sometimes these are cached values */
-			   (conf->subdevice == ss_device || conf->subdevice == 0xffff)) {
-				struct smsc_ircc_subsystem_configuration tmpconf;
+			   conf->subvendor == ss_vendor &&
+			   /* Sometimes these are cached values */
+			   (conf->subdevice == ss_device ||
+			    conf->subdevice == 0xffff)) {
+				struct smsc_ircc_subsystem_configuration
+					tmpconf;
 
-				memcpy(&tmpconf, conf, sizeof(struct smsc_ircc_subsystem_configuration));
+				memcpy(&tmpconf, conf,
+				       sizeof(struct smsc_ircc_subsystem_configuration));
 
-				/* Override the default values with anything passed in as parameter */
+				/*
+				 * Override the default values with anything
+				 * passed in as parameter
+				 */
 				if (ircc_cfg != 0)
 					tmpconf.cfg_base = ircc_cfg;
 				if (ircc_fir != 0)
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index 6f7dce8eba5..b67f586d739 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -149,6 +149,8 @@ static void enp2611_check_link_status(unsigned long __dummy)
 		int status;
 
 		dev = nds[i];
+		if (dev == NULL)
+			continue;
 
 		status = pm3386_is_link_up(i);
 		if (status && !netif_carrier_ok(dev)) {
@@ -191,6 +193,7 @@ static void enp2611_set_port_admin_status(int port, int up)
 
 static int __init enp2611_init_module(void)
 { 
+	int ports;
 	int i;
 
 	if (!machine_is_enp2611())
@@ -199,7 +202,8 @@ static int __init enp2611_init_module(void)
 	caleb_reset();
 	pm3386_reset();
 
-	for (i = 0; i < 3; i++) {
+	ports = pm3386_port_count();
+	for (i = 0; i < ports; i++) {
 		nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
 		if (nds[i] == NULL) {
 			while (--i >= 0)
@@ -215,9 +219,10 @@ static int __init enp2611_init_module(void)
 
 	ixp2400_msf_init(&enp2611_msf_parameters);
 
-	if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
-		for (i = 0; i < 3; i++)
-			free_netdev(nds[i]);
+	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
+		for (i = 0; i < ports; i++)
+			if (nds[i])
+				free_netdev(nds[i]);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
index 5c7ab756405..5224651c9aa 100644
--- a/drivers/net/ixp2000/pm3386.c
+++ b/drivers/net/ixp2000/pm3386.c
@@ -86,40 +86,53 @@ static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
 	pm3386_reg_write(port >> 1, reg, value);
 }
 
+int pm3386_secondary_present(void)
+{
+	return pm3386_reg_read(1, 0) == 0x3386;
+}
 
 void pm3386_reset(void)
 {
 	u8 mac[3][6];
+	int secondary;
+
+	secondary = pm3386_secondary_present();
 
 	/* Save programmed MAC addresses.  */
 	pm3386_get_mac(0, mac[0]);
 	pm3386_get_mac(1, mac[1]);
-	pm3386_get_mac(2, mac[2]);
+	if (secondary)
+		pm3386_get_mac(2, mac[2]);
 
 	/* Assert analog and digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0060);
-	pm3386_reg_write(1, 0x002, 0x0060);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0060);
 	mdelay(1);
 
 	/* Deassert analog reset.  */
 	pm3386_reg_write(0, 0x002, 0x0062);
-	pm3386_reg_write(1, 0x002, 0x0062);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0062);
 	mdelay(10);
 
 	/* Deassert digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0063);
-	pm3386_reg_write(1, 0x002, 0x0063);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0063);
 	mdelay(10);
 
 	/* Restore programmed MAC addresses.  */
 	pm3386_set_mac(0, mac[0]);
 	pm3386_set_mac(1, mac[1]);
-	pm3386_set_mac(2, mac[2]);
+	if (secondary)
+		pm3386_set_mac(2, mac[2]);
 
 	/* Disable carrier on all ports.  */
 	pm3386_set_carrier(0, 0);
 	pm3386_set_carrier(1, 0);
-	pm3386_set_carrier(2, 0);
+	if (secondary)
+		pm3386_set_carrier(2, 0);
 }
 
 static u16 swaph(u16 x)
@@ -127,6 +140,11 @@ static u16 swaph(u16 x)
 	return ((x << 8) | (x >> 8)) & 0xffff;
 }
 
+int pm3386_port_count(void)
+{
+	return 2 + pm3386_secondary_present();
+}
+
 void pm3386_init_port(int port)
 {
 	int pm = port >> 1;
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h
index fe92bb056ac..cc4183dca91 100644
--- a/drivers/net/ixp2000/pm3386.h
+++ b/drivers/net/ixp2000/pm3386.h
@@ -13,6 +13,7 @@
 #define __PM3386_H
 
 void pm3386_reset(void);
+int pm3386_port_count(void);
 void pm3386_init_port(int port);
 void pm3386_get_mac(int port, u8 *mac);
 void pm3386_set_mac(int port, u8 *mac);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index ea62a3e7d58..411f4d809c4 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1419,6 +1419,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	mv643xx_eth_update_pscr(dev, &cmd);
 	mv643xx_set_settings(dev, &cmd);
 
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	err = register_netdev(dev);
 	if (err)
 		goto out;
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 08b218c5bfb..b32765215f7 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -139,8 +139,9 @@ bad_clone_list[] __initdata = {
 
 #if defined(CONFIG_PLAT_MAPPI)
 #  define DCR_VAL 0x4b
-#elif defined(CONFIG_PLAT_OAKS32R)
-#  define DCR_VAL 0x48
+#elif defined(CONFIG_PLAT_OAKS32R)  || \
+   defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#  define DCR_VAL 0x48		/* 8-bit mode */
 #else
 #  define DCR_VAL 0x49
 #endif
@@ -226,7 +227,7 @@ struct net_device * __init ne_probe(int unit)
 	netdev_boot_setup_check(dev);
 
 #ifdef CONFIG_TOSHIBA_RBTX4938
-	dev->base_addr = 0x07f20280;
+	dev->base_addr = RBTX4938_RTL_8019_BASE;
 	dev->irq = RBTX4938_RTL_8019_IRQ;
 #endif
 	err = do_ne_probe(dev);
@@ -396,10 +397,22 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 		/* We must set the 8390 for word mode. */
 		outb_p(DCR_VAL, ioaddr + EN0_DCFG);
 		start_page = NESM_START_PG;
-		stop_page = NESM_STOP_PG;
+
+		/*
+		 * Realtek RTL8019AS datasheet says that the PSTOP register
+		 * shouldn't exceed 0x60 in 8-bit mode.
+		 * This chip can be identified by reading the signature from
+		 * the  remote byte count registers (otherwise write-only)...
+		 */
+		if ((DCR_VAL & 0x01) == 0 &&		/* 8-bit mode */
+		    inb(ioaddr + EN0_RCNTLO) == 0x50 &&
+		    inb(ioaddr + EN0_RCNTHI) == 0x70)
+			stop_page = 0x60;
+		else
+			stop_page = NESM_STOP_PG;
 	} else {
 		start_page = NE1SM_START_PG;
-		stop_page = NE1SM_STOP_PG;
+		stop_page  = NE1SM_STOP_PG;
 	}
 
 #if  defined(CONFIG_PLAT_MAPPI) || defined(CONFIG_PLAT_OAKS32R)
@@ -509,15 +522,9 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 	ei_status.name = name;
 	ei_status.tx_start_page = start_page;
 	ei_status.stop_page = stop_page;
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
-	wordlength = 1;
-#endif
 
-#ifdef CONFIG_PLAT_OAKS32R
-	ei_status.word16 = 0;
-#else
-	ei_status.word16 = (wordlength == 2);
-#endif
+	/* Use 16-bit mode only if this wasn't overridden by DCR_VAL */
+	ei_status.word16 = (wordlength == 2 && (DCR_VAL & 0x01));
 
 	ei_status.rx_start_page = start_page + TX_PAGES;
 #ifdef PACKETBUF_MEMSIZE
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index 66e74f74026..bf58db29e2e 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -107,7 +107,7 @@ static int init_netconsole(void)
 
 	if(!configured) {
 		printk("netconsole: not configured, aborting\n");
-		return -EINVAL;
+		return 0;
 	}
 
 	if(netpoll_setup(&np))
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 448a0948852..2ea66aca648 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1691,17 +1691,6 @@ static void do_set_multicast_list(struct net_device *dev)
 		memset(ei_local->mcfilter, 0xFF, 8);
 	}
 
-	/* 
-	 * DP8390 manuals don't specify any magic sequence for altering
-	 * the multicast regs on an already running card. To be safe, we
-	 * ensure multicast mode is off prior to loading up the new hash
-	 * table. If this proves to be not enough, we can always resort
-	 * to stopping the NIC, loading the table and then restarting.
-	 */
-	 
-	if (netif_running(dev))
-		outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
-
 	outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
 	for(i = 0; i < 8; i++) 
 	{
@@ -1715,6 +1704,8 @@ static void do_set_multicast_list(struct net_device *dev)
   		outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
   	else
   		outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+
+	outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
 }
 
 /*
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 4260c2128f4..a8f6bfc96fd 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1204,7 +1204,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt)
 
 	dev->last_rx = jiffies;
 	lp->linux_stats.rx_packets++;
-	lp->linux_stats.rx_bytes += skb->len;
+	lp->linux_stats.rx_bytes += pkt_len;
 	outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
 	continue;
       } else {
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 506e777c5f0..d090df41304 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1639,6 +1639,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
 	PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 07c31f19c6b..fc08c4af506 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1774,8 +1774,6 @@ static int pcnet32_open(struct net_device *dev)
 		lp->rx_dma_addr[i] = 0;
 	}
 
-	pcnet32_free_ring(dev);
-
 	/*
 	 * Switch back to 16bit mode to avoid problems with dumb
 	 * DOS packet driver after a warm reboot
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 459443b572c..1b236bdf6b9 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -60,8 +60,10 @@ int mdiobus_register(struct mii_bus *bus)
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
 		struct phy_device *phydev;
 
-		if (bus->phy_mask & (1 << i))
+		if (bus->phy_mask & (1 << i)) {
+			bus->phy_map[i] = NULL;
 			continue;
+		}
 
 		phydev = get_phy_device(bus, i);
 
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 475dc930380..0d101a18026 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -861,6 +861,9 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb)
 		 * give dev_queue_xmit something it can free.
 		 */
 		skb2 = skb_clone(skb, GFP_ATOMIC);
+
+		if (skb2 == NULL)
+			goto abort;
 	}
 
 	ph = (struct pppoe_hdr *) skb_push(skb2, sizeof(struct pppoe_hdr));
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index b82191d2bee..f5a3bf4d959 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -127,6 +127,7 @@ static const struct mii_chip_info {
 } mii_chip_table[] = {
 	{ "SiS 900 Internal MII PHY", 		0x001d, 0x8000, LAN },
 	{ "SiS 7014 Physical Layer Solution", 	0x0016, 0xf830, LAN },
+	{ "SiS 900 on Foxconn 661 7MI",         0x0143, 0xBC70, LAN },
 	{ "Altimata AC101LF PHY",               0x0022, 0x5520, LAN },
 	{ "ADM 7001 LAN PHY",			0x002e, 0xcc60, LAN },
 	{ "AMD 79C901 10BASE-T PHY",  		0x0000, 0x6B70, LAN },
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a70c2b0cc10..5ca5a1b546a 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,8 +78,7 @@ static const struct pci_device_id skge_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },	/* DGE-530T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
@@ -402,7 +401,7 @@ static int skge_set_ring_param(struct net_device *dev,
 	int err;
 
 	if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
-	    p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+	    p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
 		return -EINVAL;
 
 	skge->rx_ring.count = p->rx_pending;
@@ -2717,8 +2716,7 @@ static int skge_poll(struct net_device *dev, int *budget)
 		if (control & BMU_OWN)
 			break;
 
-		skb = skge_rx_get(skge, e, control, rd->status,
-				  le16_to_cpu(rd->csum2));
+		skb = skge_rx_get(skge, e, control, rd->status, rd->csum2);
 		if (likely(skb)) {
 			dev->last_rx = jiffies;
 			netif_receive_skb(skb);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 67b0eab1658..959109609d8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.1"
+#define DRV_VERSION		"1.4"
 #define PFX			DRV_NAME " "
 
 /*
@@ -79,6 +79,8 @@
 #define NAPI_WEIGHT		64
 #define PHY_RETRIES		1000
 
+#define RING_NEXT(x,s)	(((x)+1) & ((s)-1))
+
 static const u32 default_msg =
     NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
     | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
@@ -96,9 +98,14 @@ static int disable_msi = 0;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
+static int idle_timeout = 100;
+module_param(idle_timeout, int, 0);
+MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)");
+
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },	/* DGE-560T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -122,6 +129,7 @@ MODULE_DEVICE_TABLE(pci, sky2_id_table);
 /* Avoid conditionals by using array */
 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
+static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
 
 /* This driver supports yukon2 chipset only */
 static const char *yukon2_name[] = {
@@ -228,6 +236,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		}
 
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+			sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -298,7 +307,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 	struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
 	u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
 
-	if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) {
+	if (sky2->autoneg == AUTONEG_ENABLE &&
+	    !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 		u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
 		ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -326,7 +336,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 			ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
 
 			if (sky2->autoneg == AUTONEG_ENABLE &&
-			    hw->chip_id == CHIP_ID_YUKON_XL) {
+			    (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 				ctrl &= ~PHY_M_PC_DSC_MSK;
 				ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
 			}
@@ -442,10 +452,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
 
 		/* set LED Function Control register */
-		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
-							   PHY_M_LEDC_INIT_CTRL(7) |	/* 10 Mbps */
-							   PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
-							   PHY_M_LEDC_STA0_CTRL(7)));	/* 1000 Mbps */
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+			     (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
+			      PHY_M_LEDC_INIT_CTRL(7) |	/* 10 Mbps */
+			      PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
+			      PHY_M_LEDC_STA0_CTRL(7)));	/* 1000 Mbps */
 
 		/* set Polarity Control register */
 		gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
@@ -459,6 +470,25 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		/* restore page register */
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 		break;
+	case CHIP_ID_YUKON_EC_U:
+		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+		/* select page 3 to access LED control register */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+		/* set LED Function Control register */
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+			     (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
+			      PHY_M_LEDC_INIT_CTRL(8) |	/* 10 Mbps */
+			      PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
+			      PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
+
+		/* set Blink Rate in LED Timer Control Register */
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK,
+			     ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
+		/* restore page register */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+		break;
 
 	default:
 		/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
@@ -467,19 +497,21 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
 	}
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
 		/* apply fixes in PHY AFE */
-		gm_phy_write(hw, port, 22, 255);
+		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
+
 		/* increase differential signal amplitude in 10BASE-T */
-		gm_phy_write(hw, port, 24, 0xaa99);
-		gm_phy_write(hw, port, 23, 0x2011);
+		gm_phy_write(hw, port, 0x18, 0xaa99);
+		gm_phy_write(hw, port, 0x17, 0x2011);
 
 		/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
-		gm_phy_write(hw, port, 24, 0xa204);
-		gm_phy_write(hw, port, 23, 0x2002);
+		gm_phy_write(hw, port, 0x18, 0xa204);
+		gm_phy_write(hw, port, 0x17, 0x2002);
 
 		/* set page register to 0 */
-		gm_phy_write(hw, port, 22, 0);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 	} else {
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 
@@ -553,6 +585,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 
 		if (sky2->duplex == DUPLEX_FULL)
 			reg |= GM_GPCR_DUP_FULL;
+
+		/* turn off pause in 10/100mbps half duplex */
+		else if (sky2->speed != SPEED_1000 &&
+			 hw->chip_id != CHIP_ID_YUKON_EC_U)
+			sky2->tx_pause = sky2->rx_pause = 0;
 	} else
 		reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
 
@@ -719,7 +756,7 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
 {
 	struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
 
-	sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE;
+	sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
 	return le;
 }
 
@@ -735,7 +772,7 @@ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
 {
 	struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
-	sky2->rx_put = (sky2->rx_put + 1) % RX_LE_SIZE;
+	sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
 	return le;
 }
 
@@ -925,8 +962,7 @@ static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask)
 	skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask);
 	if (likely(skb)) {
 		unsigned long p	= (unsigned long) skb->data;
-		skb_reserve(skb,
-			((p + RX_SKB_ALIGN - 1) & ~(RX_SKB_ALIGN - 1)) - p);
+		skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
 	}
 
 	return skb;
@@ -943,6 +979,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	struct sky2_hw *hw = sky2->hw;
 	unsigned rxq = rxqaddr[sky2->port];
 	int i;
+	unsigned thresh;
 
 	sky2->rx_put = sky2->rx_next = 0;
 	sky2_qset(hw, rxq);
@@ -967,9 +1004,21 @@ static int sky2_rx_start(struct sky2_port *sky2)
 		sky2_rx_add(sky2, re->mapaddr);
 	}
 
- 	/* Truncate oversize frames */
- 	sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
- 	sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
+	/*
+	 * The receiver hangs if it receives frames larger than the
+	 * packet buffer. As a workaround, truncate oversize frames, but
+	 * the register is limited to 9 bits, so if you do frames > 2052
+	 * you better get the MTU right!
+	 */
+	thresh = (sky2->rx_bufsize - 8) / sizeof(u32);
+	if (thresh > 0x1ff)
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
+	else {
+		sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+	}
+
 
 	/* Tell chip about available buffers */
 	sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
@@ -986,7 +1035,25 @@ static int sky2_up(struct net_device *dev)
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
 	u32 ramsize, rxspace, imask;
-	int err = -ENOMEM;
+	int cap, err = -ENOMEM;
+	struct net_device *otherdev = hw->dev[sky2->port^1];
+
+	/*
+ 	 * On dual port PCI-X card, there is an problem where status
+	 * can be received out of order due to split transactions
+	 */
+	if (otherdev && netif_running(otherdev) &&
+ 	    (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+ 		struct sky2_port *osky2 = netdev_priv(otherdev);
+ 		u16 cmd;
+
+ 		cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ 		cmd &= ~PCI_X_CMD_MAX_SPLIT;
+ 		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
+ 		sky2->rx_csum = 0;
+ 		osky2->rx_csum = 0;
+ 	}
 
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
@@ -1051,7 +1118,7 @@ static int sky2_up(struct net_device *dev)
 
 	/* Enable interrupts from phy/mac for port */
 	imask = sky2_read32(hw, B0_IMSK);
-	imask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
+	imask |= portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
 
 	return 0;
@@ -1079,7 +1146,7 @@ err_out:
 /* Modular subtraction in ring */
 static inline int tx_dist(unsigned tail, unsigned head)
 {
-	return (head - tail) % TX_RING_SIZE;
+	return (head - tail) & (TX_RING_SIZE - 1);
 }
 
 /* Number of list elements available for next tx */
@@ -1256,7 +1323,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 		le->opcode = OP_BUFFER | HW_OWNER;
 
 		fre = sky2->tx_ring
-		    + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE;
+		    + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
 		pci_unmap_addr_set(fre, mapaddr, mapping);
 	}
 
@@ -1316,7 +1383,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			struct tx_ring_info *fre;
-			fre = sky2->tx_ring + (put + i + 1) % TX_RING_SIZE;
+			fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE);
 			pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr),
 				       skb_shinfo(skb)->frags[i].size,
 				       PCI_DMA_TODEVICE);
@@ -1402,7 +1469,7 @@ static int sky2_down(struct net_device *dev)
 
 	/* Disable port IRQ */
 	imask = sky2_read32(hw, B0_IMSK);
-	imask &= ~(sky2->port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
+	imask &= ~portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
 
 	/* turn off LED's */
@@ -1499,17 +1566,26 @@ static void sky2_link_up(struct sky2_port *sky2)
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
 		    LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
 
-	if (hw->chip_id == CHIP_ID_YUKON_XL) {
+	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
 		u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+		u16 led = PHY_M_LEDC_LOS_CTRL(1);	/* link active */
+
+		switch(sky2->speed) {
+		case SPEED_10:
+			led |= PHY_M_LEDC_INIT_CTRL(7);
+			break;
+
+		case SPEED_100:
+			led |= PHY_M_LEDC_STA1_CTRL(7);
+			break;
+
+		case SPEED_1000:
+			led |= PHY_M_LEDC_STA0_CTRL(7);
+			break;
+		}
 
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
-			     PHY_M_LEDC_INIT_CTRL(sky2->speed ==
-						  SPEED_10 ? 7 : 0) |
-			     PHY_M_LEDC_STA1_CTRL(sky2->speed ==
-						  SPEED_100 ? 7 : 0) |
-			     PHY_M_LEDC_STA0_CTRL(sky2->speed ==
-						  SPEED_1000 ? 7 : 0));
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 	}
 
@@ -1584,7 +1660,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
 	sky2->speed = sky2_phy_speed(hw, aux);
 
 	/* Pause bits are offset (9..8) */
-	if (hw->chip_id == CHIP_ID_YUKON_XL)
+	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
 		aux >>= 6;
 
 	sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
@@ -1686,13 +1762,12 @@ static void sky2_tx_timeout(struct net_device *dev)
 }
 
 
-#define roundup(x, y)   ((((x)+((y)-1))/(y))*(y))
 /* Want receive buffer size to be multiple of 64 bits
  * and incl room for vlan and truncation
  */
 static inline unsigned sky2_buf_size(int mtu)
 {
-	return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
+	return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
 }
 
 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -1857,39 +1932,38 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 	}
 }
 
+/* Is status ring empty or is there more to do? */
+static inline int sky2_more_work(const struct sky2_hw *hw)
+{
+	return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
 	int work_done = 0;
+	u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
 
 	rmb();
 
-	for(;;) {
+	while (hw->st_idx != hwidx) {
 		struct sky2_status_le *le  = hw->st_le + hw->st_idx;
 		struct net_device *dev;
 		struct sky2_port *sky2;
 		struct sk_buff *skb;
 		u32 status;
 		u16 length;
-		u8  link, opcode;
 
-		opcode = le->opcode;
-		if (!opcode)
-			break;
-		opcode &= ~HW_OWNER;
+		hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
 
-		hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE;
-		le->opcode = 0;
-
-		link = le->link;
-		BUG_ON(link >= 2);
-		dev = hw->dev[link];
+		BUG_ON(le->link >= 2);
+		dev = hw->dev[le->link];
 
 		sky2 = netdev_priv(dev);
 		length = le->length;
 		status = le->status;
 
-		switch (opcode) {
+		switch (le->opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
 			skb = sky2_receive(sky2, length, status);
 			if (!skb)
@@ -1929,7 +2003,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 
 		case OP_TXINDEXLE:
 			/* TX index reports status for both ports */
-			sky2_tx_done(hw->dev[0], status & 0xffff);
+			BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
+			sky2_tx_done(hw->dev[0], status & 0xfff);
 			if (hw->dev[1])
 				sky2_tx_done(hw->dev[1],
 				     ((status >> 24) & 0xff)
@@ -1939,8 +2014,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 		default:
 			if (net_ratelimit())
 				printk(KERN_WARNING PFX
-				       "unknown status opcode 0x%x\n", opcode);
-			break;
+				       "unknown status opcode 0x%x\n", le->opcode);
+			goto exit_loop;
 		}
 	}
 
@@ -2086,6 +2161,21 @@ static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
 	}
 }
 
+/* If idle then force a fake soft NAPI poll once a second
+ * to work around cases where sharing an edge triggered interrupt.
+ */
+static void sky2_idle(unsigned long arg)
+{
+	struct sky2_hw *hw = (struct sky2_hw *) arg;
+	struct net_device *dev = hw->dev[0];
+
+	if (__netif_rx_schedule_prep(dev))
+		__netif_rx_schedule(dev);
+
+	mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
+}
+
+
 static int sky2_poll(struct net_device *dev0, int *budget)
 {
 	struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
@@ -2093,49 +2183,46 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	int work_done = 0;
 	u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
 
-	if (unlikely(status & ~Y2_IS_STAT_BMU)) {
-		if (status & Y2_IS_HW_ERR)
-			sky2_hw_intr(hw);
-
-		if (status & Y2_IS_IRQ_PHY1)
-			sky2_phy_intr(hw, 0);
+	if (status & Y2_IS_HW_ERR)
+		sky2_hw_intr(hw);
 
-		if (status & Y2_IS_IRQ_PHY2)
-			sky2_phy_intr(hw, 1);
+	if (status & Y2_IS_IRQ_PHY1)
+		sky2_phy_intr(hw, 0);
 
-		if (status & Y2_IS_IRQ_MAC1)
-			sky2_mac_intr(hw, 0);
+	if (status & Y2_IS_IRQ_PHY2)
+		sky2_phy_intr(hw, 1);
 
-		if (status & Y2_IS_IRQ_MAC2)
-			sky2_mac_intr(hw, 1);
+	if (status & Y2_IS_IRQ_MAC1)
+		sky2_mac_intr(hw, 0);
 
-		if (status & Y2_IS_CHK_RX1)
-			sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
+	if (status & Y2_IS_IRQ_MAC2)
+		sky2_mac_intr(hw, 1);
 
-		if (status & Y2_IS_CHK_RX2)
-			sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
+	if (status & Y2_IS_CHK_RX1)
+		sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
 
-		if (status & Y2_IS_CHK_TXA1)
-			sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
+	if (status & Y2_IS_CHK_RX2)
+		sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
 
-		if (status & Y2_IS_CHK_TXA2)
-			sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
-	}
+	if (status & Y2_IS_CHK_TXA1)
+		sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
 
-	if (status & Y2_IS_STAT_BMU) {
-		work_done = sky2_status_intr(hw, work_limit);
-		*budget -= work_done;
-		dev0->quota -= work_done;
+	if (status & Y2_IS_CHK_TXA2)
+		sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
 
-		if (work_done >= work_limit)
-			return 1;
+	work_done = sky2_status_intr(hw, work_limit);
+	*budget -= work_done;
+	dev0->quota -= work_done;
 
+	if (status & Y2_IS_STAT_BMU)
 		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-	}
+
+	if (sky2_more_work(hw))
+		return 1;
 
 	netif_rx_complete(dev0);
 
-	status = sky2_read32(hw, B0_Y2_SP_LISR);
+	sky2_read32(hw, B0_Y2_SP_LISR);
 	return 0;
 }
 
@@ -2153,8 +2240,6 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
 	prefetch(&hw->st_le[hw->st_idx]);
 	if (likely(__netif_rx_schedule_prep(dev0)))
 		__netif_rx_schedule(dev0);
-	else
-		printk(KERN_DEBUG PFX "irq race detected\n");
 
 	return IRQ_HANDLED;
 }
@@ -2193,7 +2278,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
 
 
-static int sky2_reset(struct sky2_hw *hw)
+static int __devinit sky2_reset(struct sky2_hw *hw)
 {
 	u16 status;
 	u8 t8, pmd_type;
@@ -2218,13 +2303,6 @@ static int sky2_reset(struct sky2_hw *hw)
 		return -EOPNOTSUPP;
 	}
 
-	/* This chip is new and not tested yet */
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-		pr_info(PFX "%s: is a version of Yukon 2 chipset that has not been tested yet.\n",
-			pci_name(hw->pdev));
-		pr_info("Please report success/failure to maintainer <shemminger@osdl.org>\n");
-	}
-
 	/* disable ASF */
 	if (hw->chip_id <= CHIP_ID_YUKON_EC) {
 		sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
@@ -3028,12 +3106,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	sky2->duplex = -1;
 	sky2->speed = -1;
 	sky2->advertising = sky2_supported_modes(hw);
-
-	/* Receive checksum disabled for Yukon XL
-	 * because of observed problems with incorrect
-	 * values when multiple packets are received in one interrupt
-	 */
-	sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+	sky2->rx_csum = 1;
 
 	spin_lock_init(&sky2->phy_lock);
 	sky2->tx_pending = TX_DEF_PENDING;
@@ -3276,6 +3349,11 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 
+	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+	if (idle_timeout > 0)
+		mod_timer(&hw->idle_timer,
+			  jiffies + msecs_to_jiffies(idle_timeout));
+
 	pci_set_drvdata(pdev, hw);
 
 	return 0;
@@ -3311,13 +3389,17 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 	if (!hw)
 		return;
 
+	del_timer_sync(&hw->idle_timer);
+
+	sky2_write32(hw, B0_IMSK, 0);
+	synchronize_irq(hw->pdev->irq);
+
 	dev0 = hw->dev[0];
 	dev1 = hw->dev[1];
 	if (dev1)
 		unregister_netdev(dev1);
 	unregister_netdev(dev0);
 
-	sky2_write32(hw, B0_IMSK, 0);
 	sky2_set_power_state(hw, PCI_D3hot);
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 	sky2_write8(hw, B0_CTST, CS_RST_SET);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 89dd18cd12f..8a0bc5525f0 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -214,6 +214,8 @@ enum csr_regs {
 enum {
 	Y2_VMAIN_AVAIL	= 1<<17,/* VMAIN available (YUKON-2 only) */
 	Y2_VAUX_AVAIL	= 1<<16,/* VAUX available (YUKON-2 only) */
+	Y2_HW_WOL_ON	= 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
+	Y2_HW_WOL_OFF	= 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */
 	Y2_ASF_ENABLE	= 1<<13,/* ASF Unit Enable (YUKON-2 only) */
 	Y2_ASF_DISABLE	= 1<<12,/* ASF Unit Disable (YUKON-2 only) */
 	Y2_CLK_RUN_ENA	= 1<<11,/* CLK_RUN Enable  (YUKON-2 only) */
@@ -378,6 +380,9 @@ enum {
 	CHIP_REV_YU_EC_A1    = 0,  /* Chip Rev. for Yukon-EC A1/A0 */
 	CHIP_REV_YU_EC_A2    = 1,  /* Chip Rev. for Yukon-EC A2 */
 	CHIP_REV_YU_EC_A3    = 2,  /* Chip Rev. for Yukon-EC A3 */
+
+	CHIP_REV_YU_EC_U_A0  = 0,
+	CHIP_REV_YU_EC_U_A1  = 1,
 };
 
 /*	B2_Y2_CLK_GATE	 8 bit	Clock Gating (Yukon-2 only) */
@@ -1880,6 +1885,8 @@ struct sky2_hw {
 	struct sky2_status_le *st_le;
 	u32		     st_idx;
 	dma_addr_t   	     st_dma;
+
+	struct timer_list    idle_timer;
 	int		     msi_detected;
 	wait_queue_head_t    msi_wait;
 };
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 43f5e86fc55..394339d5e87 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1652,6 +1652,8 @@ spider_net_enable_card(struct spider_net_card *card)
 		{ SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
 
 		{ SPIDER_NET_GMRWOLCTRL, 0 },
+		{ SPIDER_NET_GTESTMD, 0x10000000 },
+		{ SPIDER_NET_GTTQMSK, 0x00400040 },
 		{ SPIDER_NET_GTESTMD, 0 },
 
 		{ SPIDER_NET_GMACINTEN, 0 },
@@ -1792,15 +1794,7 @@ spider_net_setup_phy(struct spider_net_card *card)
 	if (phy->def->ops->setup_forced)
 		phy->def->ops->setup_forced(phy, SPEED_1000, DUPLEX_FULL);
 
-	/* the following two writes could be moved to sungem_phy.c */
-	/* enable fiber mode */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x9020);
-	/* LEDs active in both modes, autosense prio = fiber */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x945f);
-
-	/* switch off fibre autoneg */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0xfc01);
-	spider_net_write_phy(card->netdev, 1, 0x0b, 0x0004);
+	phy->def->ops->enable_fiber(phy);
 
 	phy->def->ops->read_link(phy);
 	pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name,
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 5922b529a04..3b8d951cf73 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -120,6 +120,8 @@ extern char spider_net_driver_name[];
 #define SPIDER_NET_GMRUAFILnR		0x00000500
 #define SPIDER_NET_GMRUA0FIL15R		0x00000578
 
+#define SPIDER_NET_GTTQMSK		0x00000934
+
 /* RX DMA controller registers, all 0x00000a.. are for DMA controller A,
  * 0x00000b.. for DMA controller B, etc. */
 #define SPIDER_NET_GDADCHA		0x00000a00
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index cb0aba95d4e..b2ddd5e7930 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -275,7 +275,7 @@ static int bcm5411_init(struct mii_phy* phy)
 	return 0;
 }
 
-static int bcm5411_suspend(struct mii_phy* phy)
+static int generic_suspend(struct mii_phy* phy)
 {
 	phy_write(phy, MII_BMCR, BMCR_PDOWN);
 
@@ -329,6 +329,30 @@ static int bcm5421_init(struct mii_phy* phy)
 	return 0;
 }
 
+static int bcm5421_enable_fiber(struct mii_phy* phy)
+{
+	/* enable fiber mode */
+	phy_write(phy, MII_NCONFIG, 0x9020);
+	/* LEDs active in both modes, autosense prio = fiber */
+	phy_write(phy, MII_NCONFIG, 0x945f);
+
+	/* switch off fibre autoneg */
+	phy_write(phy, MII_NCONFIG, 0xfc01);
+	phy_write(phy, 0x0b, 0x0004);
+
+	return 0;
+}
+
+static int bcm5461_enable_fiber(struct mii_phy* phy)
+{
+        phy_write(phy, MII_NCONFIG, 0xfc0c);
+        phy_write(phy, MII_BMCR, 0x4140);
+        phy_write(phy, MII_NCONFIG, 0xfc0b);
+	phy_write(phy, MII_BMCR, 0x0140);
+
+	return 0;
+}
+
 static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
 {
 	u16 ctl, adv;
@@ -738,7 +762,7 @@ static struct mii_phy_def bcm5401_phy_def = {
 /* Broadcom BCM 5411 */
 static struct mii_phy_ops bcm5411_phy_ops = {
 	.init		= bcm5411_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -757,11 +781,12 @@ static struct mii_phy_def bcm5411_phy_def = {
 /* Broadcom BCM 5421 */
 static struct mii_phy_ops bcm5421_phy_ops = {
 	.init		= bcm5421_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
 	.read_link	= bcm54xx_read_link,
+	.enable_fiber   = bcm5421_enable_fiber,
 };
 
 static struct mii_phy_def bcm5421_phy_def = {
@@ -776,7 +801,7 @@ static struct mii_phy_def bcm5421_phy_def = {
 /* Broadcom BCM 5421 built-in K2 */
 static struct mii_phy_ops bcm5421k2_phy_ops = {
 	.init		= bcm5421_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -792,10 +817,29 @@ static struct mii_phy_def bcm5421k2_phy_def = {
 	.ops		= &bcm5421k2_phy_ops
 };
 
+static struct mii_phy_ops bcm5461_phy_ops = {
+	.init		= bcm5421_init,
+	.suspend	= generic_suspend,
+	.setup_aneg	= bcm54xx_setup_aneg,
+	.setup_forced	= bcm54xx_setup_forced,
+	.poll_link	= genmii_poll_link,
+	.read_link	= bcm54xx_read_link,
+	.enable_fiber   = bcm5461_enable_fiber,
+};
+
+static struct mii_phy_def bcm5461_phy_def = {
+	.phy_id		= 0x002060c0,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "BCM5461",
+	.features	= MII_GBIT_FEATURES,
+	.magic_aneg	= 1,
+	.ops		= &bcm5461_phy_ops
+};
+
 /* Broadcom BCM 5462 built-in Vesta */
 static struct mii_phy_ops bcm5462V_phy_ops = {
 	.init		= bcm5421_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -816,6 +860,7 @@ static struct mii_phy_def bcm5462V_phy_def = {
  * would be useful here) --BenH.
  */
 static struct mii_phy_ops marvell_phy_ops = {
+	.suspend	= generic_suspend,
 	.setup_aneg	= marvell_setup_aneg,
 	.setup_forced	= marvell_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -856,6 +901,7 @@ static struct mii_phy_def* mii_phy_table[] = {
 	&bcm5411_phy_def,
 	&bcm5421_phy_def,
 	&bcm5421k2_phy_def,
+	&bcm5461_phy_def,
 	&bcm5462V_phy_def,
 	&marvell_phy_def,
 	&genmii_phy_def,
diff --git a/drivers/net/sungem_phy.h b/drivers/net/sungem_phy.h
index 430544496c5..69e125197fc 100644
--- a/drivers/net/sungem_phy.h
+++ b/drivers/net/sungem_phy.h
@@ -12,6 +12,7 @@ struct mii_phy_ops
 	int		(*setup_forced)(struct mii_phy *phy, int speed, int fd);
 	int		(*poll_link)(struct mii_phy *phy);
 	int		(*read_link)(struct mii_phy *phy);
+	int		(*enable_fiber)(struct mii_phy *phy);
 };
 
 /* Structure used to statically define an mii/gii based PHY */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 73e271e59c6..49ad60b7265 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.56"
-#define DRV_MODULE_RELDATE	"Apr 1, 2006"
+#define DRV_MODULE_VERSION	"3.58"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -974,6 +974,8 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 	return err;
 }
 
+static void tg3_link_report(struct tg3 *);
+
 /* This will reset the tigon3 PHY if there is no valid
  * link unless the FORCE argument is non-zero.
  */
@@ -987,6 +989,11 @@ static int tg3_phy_reset(struct tg3 *tp)
 	if (err != 0)
 		return -EBUSY;
 
+	if (netif_running(tp->dev) && netif_carrier_ok(tp->dev)) {
+		netif_carrier_off(tp->dev);
+		tg3_link_report(tp);
+	}
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
@@ -1023,6 +1030,12 @@ out:
 		tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x14e2);
 		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
 	}
+	else if (tp->tg3_flags2 & TG3_FLG2_PHY_JITTER_BUG) {
+		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
+		tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
+		tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
+		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+	}
 	/* Set Extended packet length bit (bit 14) on all chips that */
 	/* support jumbo frames */
 	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
@@ -3531,7 +3544,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id,
 	return IRQ_RETVAL(0);
 }
 
-static int tg3_init_hw(struct tg3 *);
+static int tg3_init_hw(struct tg3 *, int);
 static int tg3_halt(struct tg3 *, int, int);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -3567,7 +3580,7 @@ static void tg3_reset_task(void *_data)
 	tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tg3_netif_start(tp);
 
@@ -4042,7 +4055,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 
 	tg3_set_mtu(dev, tp, new_mtu);
 
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 0);
 
 	tg3_netif_start(tp);
 
@@ -5719,9 +5732,23 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
 	if (!netif_running(dev))
 		return 0;
 
-	spin_lock_bh(&tp->lock);
-	__tg3_set_mac_addr(tp);
-	spin_unlock_bh(&tp->lock);
+	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+		/* Reset chip so that ASF can re-init any MAC addresses it
+		 * needs.
+		 */
+		tg3_netif_stop(tp);
+		tg3_full_lock(tp, 1);
+
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+		tg3_init_hw(tp, 0);
+
+		tg3_netif_start(tp);
+		tg3_full_unlock(tp);
+	} else {
+		spin_lock_bh(&tp->lock);
+		__tg3_set_mac_addr(tp);
+		spin_unlock_bh(&tp->lock);
+	}
 
 	return 0;
 }
@@ -5771,7 +5798,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 }
 
 /* tp->lock is held. */
-static int tg3_reset_hw(struct tg3 *tp)
+static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 {
 	u32 val, rdmac_mode;
 	int i, err, limit;
@@ -5786,7 +5813,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tg3_abort_hw(tp, 1);
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+	if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy)
 		tg3_phy_reset(tp);
 
 	err = tg3_chip_reset(tp);
@@ -6327,7 +6354,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 	}
 
-	err = tg3_setup_phy(tp, 1);
+	err = tg3_setup_phy(tp, reset_phy);
 	if (err)
 		return err;
 
@@ -6400,7 +6427,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 /* Called at device open time to get the chip ready for
  * packet processing.  Invoked with tp->lock held.
  */
-static int tg3_init_hw(struct tg3 *tp)
+static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
 	int err;
 
@@ -6413,7 +6440,7 @@ static int tg3_init_hw(struct tg3 *tp)
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
-	err = tg3_reset_hw(tp);
+	err = tg3_reset_hw(tp, reset_phy);
 
 out:
 	return err;
@@ -6461,6 +6488,10 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp)
 	TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
 	TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
 	TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
+
+	TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
+	TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+	TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
 }
 
 static void tg3_timer(unsigned long __opaque)
@@ -6683,7 +6714,7 @@ static int tg3_test_msi(struct tg3 *tp)
 	tg3_full_lock(tp, 1);
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 
 	tg3_full_unlock(tp);
 
@@ -6748,7 +6779,7 @@ static int tg3_open(struct net_device *dev)
 
 	tg3_full_lock(tp, 0);
 
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 	if (err) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_free_rings(tp);
@@ -7626,21 +7657,23 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->supported |= (SUPPORTED_1000baseT_Half |
 				   SUPPORTED_1000baseT_Full);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
+	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
 		cmd->supported |= (SUPPORTED_100baseT_Half |
 				  SUPPORTED_100baseT_Full |
 				  SUPPORTED_10baseT_Half |
 				  SUPPORTED_10baseT_Full |
 				  SUPPORTED_MII);
-	else
+		cmd->port = PORT_TP;
+	} else {
 		cmd->supported |= SUPPORTED_FIBRE;
+		cmd->port = PORT_FIBRE;
+	}
   
 	cmd->advertising = tp->link_config.advertising;
 	if (netif_running(dev)) {
 		cmd->speed = tp->link_config.active_speed;
 		cmd->duplex = tp->link_config.active_duplex;
 	}
-	cmd->port = 0;
 	cmd->phy_address = PHY_ADDR;
 	cmd->transceiver = 0;
 	cmd->autoneg = tp->link_config.autoneg;
@@ -7839,7 +7872,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -7884,7 +7917,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -8427,6 +8460,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 
 	tx_len = 1514;
 	skb = dev_alloc_skb(tx_len);
+	if (!skb)
+		return -ENOMEM;
+
 	tx_data = skb_put(skb, tx_len);
 	memcpy(tx_data, tp->dev->dev_addr, 6);
 	memset(tx_data + 6, 0x0, 8);
@@ -8522,7 +8558,7 @@ static int tg3_test_loopback(struct tg3 *tp)
 	if (!netif_running(tp->dev))
 		return TG3_LOOPBACK_FAILED;
 
-	tg3_reset_hw(tp);
+	tg3_reset_hw(tp, 1);
 
 	if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
 		err |= TG3_MAC_LOOPBACK_FAILED;
@@ -8596,7 +8632,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		if (netif_running(dev)) {
 			tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-			tg3_init_hw(tp);
+			tg3_init_hw(tp, 1);
 			tg3_netif_start(tp);
 		}
 
@@ -9377,7 +9413,7 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
 
 	        if ((page_off == 0) || (i == 0))
 			nvram_cmd |= NVRAM_CMD_FIRST;
-		else if (page_off == (tp->nvram_pagesize - 4))
+		if (page_off == (tp->nvram_pagesize - 4))
 			nvram_cmd |= NVRAM_CMD_LAST;
 
 		if (i == (len - 4))
@@ -10353,10 +10389,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0)
 		tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
 
-	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5755) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5787))
-		tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
+	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+			tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG;
+		else
+			tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
+	}
 
 	tp->coalesce_mode = 0;
 	if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
@@ -11569,7 +11608,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 		tg3_full_lock(tp, 0);
 
 		tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 
 		tp->timer.expires = jiffies + tp->timer_offset;
 		add_timer(&tp->timer);
@@ -11603,7 +11642,7 @@ static int tg3_resume(struct pci_dev *pdev)
 	tg3_full_lock(tp, 0);
 
 	tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tp->timer.expires = jiffies + tp->timer_offset;
 	add_timer(&tp->timer);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 8c8b987d125..0e29b885d44 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2215,6 +2215,7 @@ struct tg3 {
 #define TG3_FLG2_HW_TSO_2		0x08000000
 #define TG3_FLG2_HW_TSO			(TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2)
 #define TG3_FLG2_1SHOT_MSI		0x10000000
+#define TG3_FLG2_PHY_JITTER_BUG		0x20000000
 
 	u32				split_mode_max_reqs;
 #define SPLIT_MODE_5704_MAX_REQ		3
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index ba05dedf29d..136a70c4d5e 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -850,7 +850,7 @@ static void init_rxtx_rings(struct net_device *dev)
 			break;
 		skb->dev = dev;			/* Mark as being used by this device. */
 		np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
-					skb->len,PCI_DMA_FROMDEVICE);
+					np->rx_buf_sz,PCI_DMA_FROMDEVICE);
 
 		np->rx_ring[i].buffer1 = np->rx_addr[i];
 		np->rx_ring[i].status = DescOwn;
@@ -1316,7 +1316,7 @@ static int netdev_rx(struct net_device *dev)
 			skb->dev = dev;			/* Mark as being used by this device. */
 			np->rx_addr[entry] = pci_map_single(np->pci_dev,
 							skb->data,
-							skb->len, PCI_DMA_FROMDEVICE);
+							np->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			np->rx_ring[entry].buffer1 = np->rx_addr[entry];
 		}
 		wmb();
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 6a23964c131..fdc21037f6d 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -129,6 +129,7 @@
 	- Massive clean-up
 	- Rewrite PHY, media handling (remove options, full_duplex, backoff)
 	- Fix Tx engine race for good
+	- Craig Brind: Zero padded aligned buffers for short packets.
 
 */
 
@@ -490,8 +491,6 @@ struct rhine_private {
 	u8 tx_thresh, rx_thresh;
 
 	struct mii_if_info mii_if;
-	struct work_struct tx_timeout_task;
-	struct work_struct check_media_task;
 	void __iomem *base;
 };
 
@@ -499,8 +498,6 @@ static int  mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 static int  rhine_open(struct net_device *dev);
 static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
 static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
 static void rhine_tx(struct net_device *dev);
@@ -855,12 +852,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	if (rp->quirks & rqRhineI)
 		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
 
-	INIT_WORK(&rp->tx_timeout_task,
-		  (void (*)(void *))rhine_tx_timeout_task, dev);
-
-	INIT_WORK(&rp->check_media_task,
-		  (void (*)(void *))rhine_check_media_task, dev);
-
 	/* dev->name not defined before register_netdev()! */
 	rc = register_netdev(dev);
 	if (rc)
@@ -1107,11 +1098,6 @@ static void rhine_set_carrier(struct mii_if_info *mii)
 		       netif_carrier_ok(mii->dev));
 }
 
-static void rhine_check_media_task(struct net_device *dev)
-{
-	rhine_check_media(dev, 0);
-}
-
 static void init_registers(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
@@ -1165,8 +1151,8 @@ static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
 	if (quirks & rqRhineI) {
 		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR
 
-		/* Do not call from ISR! */
-		msleep(1);
+		/* Can be called from ISR. Evil. */
+		mdelay(1);
 
 		/* 0x80 must be set immediately before turning it off */
 		iowrite8(0x80, ioaddr + MIICmd);
@@ -1256,16 +1242,6 @@ static int rhine_open(struct net_device *dev)
 static void rhine_tx_timeout(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
-
-	/*
-	 * Move bulk of work outside of interrupt context
-	 */
-	schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
-{
-	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 
 	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1326,7 +1302,12 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 			rp->stats.tx_dropped++;
 			return 0;
 		}
+
+		/* Padding is not copied and so must be redone. */
 		skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
+		if (skb->len < ETH_ZLEN)
+			memset(rp->tx_buf[entry] + skb->len, 0,
+			       ETH_ZLEN - skb->len);
 		rp->tx_skbuff_dma[entry] = 0;
 		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
 						      (rp->tx_buf[entry] -
@@ -1671,7 +1652,7 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	spin_lock(&rp->lock);
 
 	if (intr_status & IntrLinkChange)
-		schedule_work(&rp->check_media_task);
+		rhine_check_media(dev, 0);
 	if (intr_status & IntrStatsMax) {
 		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
 		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1921,9 +1902,6 @@ static int rhine_close(struct net_device *dev)
 	spin_unlock_irq(&rp->lock);
 
 	free_irq(rp->pdev->irq, dev);
-
-	flush_scheduled_work();
-
 	free_rbufs(dev);
 	free_tbufs(dev);
 	free_ring(dev);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index bad09ebdb50..e0874cbfefe 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -6,7 +6,7 @@ menu "Wireless LAN (non-hamradio)"
 	depends on NETDEVICES
 
 config NET_RADIO
-	bool "Wireless LAN drivers (non-hamradio)"
+	bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
 	select WIRELESS_EXT
 	---help---
 	  Support for wireless LANs and everything having to do with radio,
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 108d9fed8f0..00764ddd74d 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -3139,6 +3139,7 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
 		}
 		if ( status & EV_LINK ) {
 			union iwreq_data	wrqu;
+			int scan_forceloss = 0;
 			/* The link status has changed, if you want to put a
 			   monitor hook in, do it here.  (Remember that
 			   interrupts are still disabled!)
@@ -3157,7 +3158,8 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
 			  code) */
 #define AUTHFAIL 0x0300 /* Authentication failure (low byte is reason
 			   code) */
-#define ASSOCIATED 0x0400 /* Assocatied */
+#define ASSOCIATED 0x0400 /* Associated */
+#define REASSOCIATED 0x0600 /* Reassociated?  Only on firmware >= 5.30.17 */
 #define RC_RESERVED 0 /* Reserved return code */
 #define RC_NOREASON 1 /* Unspecified reason */
 #define RC_AUTHINV 2 /* Previous authentication invalid */
@@ -3174,44 +3176,30 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
 			  leaving BSS */
 #define RC_NOAUTH 9 /* Station requesting (Re)Association is not
 		       Authenticated with the responding station */
-			if (newStatus != ASSOCIATED) {
-				if (auto_wep && !apriv->expires) {
-					apriv->expires = RUN_AT(3*HZ);
-					wake_up_interruptible(&apriv->thr_wait);
-				}
-			} else {
-				struct task_struct *task = apriv->task;
+			if (newStatus == FORCELOSS && apriv->scan_timeout > 0)
+				scan_forceloss = 1;
+			if(newStatus == ASSOCIATED || newStatus == REASSOCIATED) {
 				if (auto_wep)
 					apriv->expires = 0;
-				if (task)
-					wake_up_process (task);
+				if (apriv->task)
+					wake_up_process (apriv->task);
 				set_bit(FLAG_UPDATE_UNI, &apriv->flags);
 				set_bit(FLAG_UPDATE_MULTI, &apriv->flags);
-			}
-			/* Question : is ASSOCIATED the only status
-			 * that is valid ? We want to catch handover
-			 * and reassociations as valid status
-			 * Jean II */
-			if(newStatus == ASSOCIATED) {
-#if 0
-				/* FIXME: Grabbing scan results here
-				 * seems to be too early???  Just wait for
-				 * timeout instead. */
-				if (apriv->scan_timeout > 0) {
-					set_bit(JOB_SCAN_RESULTS, &apriv->flags);
-					wake_up_interruptible(&apriv->thr_wait);
-				}
-#endif
+
 				if (down_trylock(&apriv->sem) != 0) {
 					set_bit(JOB_EVENT, &apriv->flags);
 					wake_up_interruptible(&apriv->thr_wait);
 				} else
 					airo_send_event(dev);
-			} else {
-				memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
-				wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+			} else if (!scan_forceloss) {
+				if (auto_wep && !apriv->expires) {
+					apriv->expires = RUN_AT(3*HZ);
+					wake_up_interruptible(&apriv->thr_wait);
+				}
 
 				/* Send event to user space */
+				memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
+				wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 				wireless_send_event(dev, SIOCGIWAP, &wrqu,NULL);
 			}
 		}
@@ -7136,10 +7124,10 @@ static int airo_set_scan(struct net_device *dev,
 		goto out;
 
 	/* Initiate a scan command */
+	ai->scan_timeout = RUN_AT(3*HZ);
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.cmd=CMD_LISTBSS;
 	issuecommand(ai, &cmd, &rsp);
-	ai->scan_timeout = RUN_AT(3*HZ);
 	wake = 1;
 
 out:
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index 0e1ac338cac..bed6823d980 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1838,7 +1838,7 @@ struct net_device * __init arlan_probe(int unit)
 }
 
 #ifdef  MODULE
-int init_module(void)
+int __init init_module(void)
 {
 	int i = 0;
 
@@ -1860,7 +1860,7 @@ int init_module(void)
 }
 
 
-void cleanup_module(void)
+void __exit cleanup_module(void)
 {
 	int i = 0;
 	struct net_device *dev;
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 87afa6878f2..8606c88886f 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3463,6 +3463,7 @@ static void atmel_command_irq(struct atmel_private *priv)
 	u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
 	u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET));
 	int fast_scan;
+	union iwreq_data wrqu;
 
 	if (status == CMD_STATUS_IDLE ||
 	    status == CMD_STATUS_IN_PROGRESS)
@@ -3487,6 +3488,7 @@ static void atmel_command_irq(struct atmel_private *priv)
 			atmel_scan(priv, 1);
 		} else {
 			int bss_index = retrieve_bss(priv);
+			int notify_scan_complete = 1;
 			if (bss_index != -1) {
 				atmel_join_bss(priv, bss_index);
 			} else if (priv->operating_mode == IW_MODE_ADHOC &&
@@ -3495,8 +3497,14 @@ static void atmel_command_irq(struct atmel_private *priv)
 			} else {
 				priv->fast_scan = !fast_scan;
 				atmel_scan(priv, 1);
+				notify_scan_complete = 0;
 			}
 			priv->site_survey_state = SITE_SURVEY_COMPLETED;
+			if (notify_scan_complete) {
+				wrqu.data.length = 0;
+				wrqu.data.flags = 0;
+				wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
+			}
 		}
 		break;
 
@@ -3509,6 +3517,9 @@ static void atmel_command_irq(struct atmel_private *priv)
 		priv->site_survey_state = SITE_SURVEY_COMPLETED;
 		if (priv->station_is_associated) {
 			atmel_enter_state(priv, STATION_STATE_READY);
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
 		} else {
 			atmel_scan(priv, 1);
 		}
diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig
index 418465600a7..25ea4748f0b 100644
--- a/drivers/net/wireless/bcm43xx/Kconfig
+++ b/drivers/net/wireless/bcm43xx/Kconfig
@@ -17,8 +17,11 @@ config BCM43XX_DEBUG
 
 config BCM43XX_DMA
 	bool
+	depends on BCM43XX
+
 config BCM43XX_PIO
 	bool
+	depends on BCM43XX
 
 choice
 	prompt "BCM43xx data transfer mode"
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index dcadd295de4..2e83083935e 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -15,7 +15,6 @@
 
 #include "bcm43xx_debugfs.h"
 #include "bcm43xx_leds.h"
-#include "bcm43xx_sysfs.h"
 
 
 #define PFX				KBUILD_MODNAME ": "
@@ -638,8 +637,6 @@ struct bcm43xx_key {
 };
 
 struct bcm43xx_private {
-	struct bcm43xx_sysfs sysfs;
-
 	struct ieee80211_device *ieee;
 	struct ieee80211softmac_device *softmac;
 
@@ -772,6 +769,20 @@ struct bcm43xx_private * bcm43xx_priv(struct net_device *dev)
 	return ieee80211softmac_priv(dev);
 }
 
+struct device;
+
+static inline
+struct bcm43xx_private * dev_to_bcm(struct device *dev)
+{
+	struct net_device *net_dev;
+	struct bcm43xx_private *bcm;
+
+	net_dev = dev_get_drvdata(dev);
+	bcm = bcm43xx_priv(net_dev);
+
+	return bcm;
+}
+
 
 /* Helper function, which returns a boolean.
  * TRUE, if PIO is used; FALSE, if DMA is used.
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
index d2c3401e9b7..35a4fcb6d92 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
@@ -452,12 +452,12 @@ void bcm43xx_printk_dump(const char *data,
 	size_t i;
 	char c;
 
-	printk(KERN_INFO PFX "Data dump (%s, %u bytes):",
+	printk(KERN_INFO PFX "Data dump (%s, %zd bytes):",
 	       description, size);
 	for (i = 0; i < size; i++) {
 		c = data[i];
 		if (i % 8 == 0)
-			printk("\n" KERN_INFO PFX "0x%08x:  0x%02x, ", i, c & 0xff);
+			printk("\n" KERN_INFO PFX "0x%08zx:  0x%02x, ", i, c & 0xff);
 		else
 			printk("0x%02x, ", c & 0xff);
 	}
@@ -472,12 +472,12 @@ void bcm43xx_printk_bitdump(const unsigned char *data,
 	int j;
 	const unsigned char *d;
 
-	printk(KERN_INFO PFX "*** Bitdump (%s, %u bytes, %s) ***",
+	printk(KERN_INFO PFX "*** Bitdump (%s, %zd bytes, %s) ***",
 	       description, bytes, msb_to_lsb ? "MSB to LSB" : "LSB to MSB");
 	for (i = 0; i < bytes; i++) {
 		d = data + i;
 		if (i % 8 == 0)
-			printk("\n" KERN_INFO PFX "0x%08x:  ", i);
+			printk("\n" KERN_INFO PFX "0x%08zx:  ", i);
 		if (msb_to_lsb) {
 			for (j = 7; j >= 0; j--) {
 				if (*d & (1 << j))
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
index c3681b8f09b..d0318e525ba 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
@@ -196,8 +196,9 @@ static int alloc_ringmemory(struct bcm43xx_dmaring *ring)
 	}
 	if (ring->dmabase + BCM43xx_DMA_RINGMEMSIZE > BCM43xx_DMA_BUSADDRMAX) {
 		printk(KERN_ERR PFX ">>>FATAL ERROR<<<  DMA RINGMEMORY >1G "
-				    "(0x%08x, len: %lu)\n",
-		       ring->dmabase, BCM43xx_DMA_RINGMEMSIZE);
+				    "(0x%llx, len: %lu)\n",
+				(unsigned long long)ring->dmabase,
+				BCM43xx_DMA_RINGMEMSIZE);
 		dma_free_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
 				  ring->vbase, ring->dmabase);
 		return -ENOMEM;
@@ -307,8 +308,8 @@ static int setup_rx_descbuffer(struct bcm43xx_dmaring *ring,
 		unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
 		dev_kfree_skb_any(skb);
 		printk(KERN_ERR PFX ">>>FATAL ERROR<<<  DMA RX SKB >1G "
-				    "(0x%08x, len: %u)\n",
-		       dmaaddr, ring->rx_buffersize);
+				    "(0x%llx, len: %u)\n",
+			(unsigned long long)dmaaddr, ring->rx_buffersize);
 		return -ENOMEM;
 	}
 	meta->skb = skb;
@@ -623,25 +624,28 @@ err_destroy_tx0:
 static u16 generate_cookie(struct bcm43xx_dmaring *ring,
 			   int slot)
 {
-	u16 cookie = 0x0000;
+	u16 cookie = 0xF000;
 
 	/* Use the upper 4 bits of the cookie as
 	 * DMA controller ID and store the slot number
-	 * in the lower 12 bits
+	 * in the lower 12 bits.
+	 * Note that the cookie must never be 0, as this
+	 * is a special value used in RX path.
 	 */
 	switch (ring->mmio_base) {
 	default:
 		assert(0);
 	case BCM43xx_MMIO_DMA1_BASE:
+		cookie = 0xA000;
 		break;
 	case BCM43xx_MMIO_DMA2_BASE:
-		cookie = 0x1000;
+		cookie = 0xB000;
 		break;
 	case BCM43xx_MMIO_DMA3_BASE:
-		cookie = 0x2000;
+		cookie = 0xC000;
 		break;
 	case BCM43xx_MMIO_DMA4_BASE:
-		cookie = 0x3000;
+		cookie = 0xD000;
 		break;
 	}
 	assert(((u16)slot & 0xF000) == 0x0000);
@@ -659,16 +663,16 @@ struct bcm43xx_dmaring * parse_cookie(struct bcm43xx_private *bcm,
 	struct bcm43xx_dmaring *ring = NULL;
 
 	switch (cookie & 0xF000) {
-	case 0x0000:
+	case 0xA000:
 		ring = dma->tx_ring0;
 		break;
-	case 0x1000:
+	case 0xB000:
 		ring = dma->tx_ring1;
 		break;
-	case 0x2000:
+	case 0xC000:
 		ring = dma->tx_ring2;
 		break;
-	case 0x3000:
+	case 0xD000:
 		ring = dma->tx_ring3;
 		break;
 	default:
@@ -729,8 +733,8 @@ static int dma_tx_fragment(struct bcm43xx_dmaring *ring,
 	if (unlikely(meta->dmaaddr + skb->len > BCM43xx_DMA_BUSADDRMAX)) {
 		return_slot(ring, slot);
 		printk(KERN_ERR PFX ">>>FATAL ERROR<<<  DMA TX SKB >1G "
-				    "(0x%08x, len: %u)\n",
-		       meta->dmaaddr, skb->len);
+				    "(0x%llx, len: %u)\n",
+			(unsigned long long)meta->dmaaddr, skb->len);
 		return -ENOMEM;
 	}
 
@@ -838,8 +842,18 @@ static void dma_rx(struct bcm43xx_dmaring *ring,
 		/* We received an xmit status. */
 		struct bcm43xx_hwxmitstatus *hw = (struct bcm43xx_hwxmitstatus *)skb->data;
 		struct bcm43xx_xmitstatus stat;
+		int i = 0;
 
 		stat.cookie = le16_to_cpu(hw->cookie);
+		while (stat.cookie == 0) {
+			if (unlikely(++i >= 10000)) {
+				assert(0);
+				break;
+			}
+			udelay(2);
+			barrier();
+			stat.cookie = le16_to_cpu(hw->cookie);
+		}
 		stat.flags = hw->flags;
 		stat.cnt1 = hw->cnt1;
 		stat.cnt2 = hw->cnt2;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
index 2d520e4b027..b7d77638ba8 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
@@ -213,6 +213,14 @@ static inline
 void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring)
 {
 }
+static inline
+void bcm43xx_dma_tx_suspend(struct bcm43xx_dmaring *ring)
+{
+}
+static inline
+void bcm43xx_dma_tx_resume(struct bcm43xx_dmaring *ring)
+{
+}
 
 #endif /* CONFIG_BCM43XX_DMA */
 #endif /* BCM43xx_DMA_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index c37371fc9e0..7ed18cad29f 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -52,6 +52,7 @@
 #include "bcm43xx_wx.h"
 #include "bcm43xx_ethtool.h"
 #include "bcm43xx_xmit.h"
+#include "bcm43xx_sysfs.h"
 
 
 MODULE_DESCRIPTION("Broadcom BCM43xx wireless driver");
@@ -938,9 +939,9 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm)
 	return 0;
 }
 
-static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
+static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
 {
-	struct ieee80211_geo geo;
+	struct ieee80211_geo *geo;
 	struct ieee80211_channel *chan;
 	int have_a = 0, have_bg = 0;
 	int i;
@@ -948,7 +949,10 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	struct bcm43xx_phyinfo *phy;
 	const char *iso_country;
 
-	memset(&geo, 0, sizeof(geo));
+	geo = kzalloc(sizeof(*geo), GFP_KERNEL);
+	if (!geo)
+		return -ENOMEM;
+
 	for (i = 0; i < bcm->nr_80211_available; i++) {
 		phy = &(bcm->core_80211_ext[i].phy);
 		switch (phy->type) {
@@ -966,31 +970,36 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
 
  	if (have_a) {
-		for (i = 0, channel = 0; channel < 201; channel++) {
-			chan = &geo.a[i++];
+		for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL;
+		      channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) {
+			chan = &geo->a[i++];
 			chan->freq = bcm43xx_channel_to_freq_a(channel);
 			chan->channel = channel;
 		}
-		geo.a_channels = i;
+		geo->a_channels = i;
 	}
 	if (have_bg) {
-		for (i = 0, channel = 1; channel < 15; channel++) {
-			chan = &geo.bg[i++];
+		for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL;
+		      channel <= IEEE80211_24GHZ_MAX_CHANNEL; channel++) {
+			chan = &geo->bg[i++];
 			chan->freq = bcm43xx_channel_to_freq_bg(channel);
 			chan->channel = channel;
 		}
-		geo.bg_channels = i;
+		geo->bg_channels = i;
 	}
-	memcpy(geo.name, iso_country, 2);
+	memcpy(geo->name, iso_country, 2);
 	if (0 /*TODO: Outdoor use only */)
-		geo.name[2] = 'O';
+		geo->name[2] = 'O';
 	else if (0 /*TODO: Indoor use only */)
-		geo.name[2] = 'I';
+		geo->name[2] = 'I';
 	else
-		geo.name[2] = ' ';
-	geo.name[3] = '\0';
+		geo->name[2] = ' ';
+	geo->name[3] = '\0';
+
+	ieee80211_set_geo(bcm->ieee, geo);
+	kfree(geo);
 
-	ieee80211_set_geo(bcm->ieee, &geo);
+	return 0;
 }
 
 /* DummyTransmission function, as documented on 
@@ -3262,6 +3271,9 @@ static int bcm43xx_init_board(struct bcm43xx_private *bcm)
 	bcm43xx_sysfs_register(bcm);
 	//FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
 
+	/*FIXME: This should be handled by softmac instead. */
+	schedule_work(&bcm->softmac->associnfo.work);
+
 	assert(err == 0);
 out:
 	return err;
@@ -3478,16 +3490,17 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
 			goto err_80211_unwind;
 		bcm43xx_wireless_core_disable(bcm);
 	}
+	err = bcm43xx_geo_init(bcm);
+	if (err)
+		goto err_80211_unwind;
 	bcm43xx_pctl_set_crystal(bcm, 0);
 
 	/* Set the MAC address in the networking subsystem */
-	if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+	if (is_valid_ether_addr(bcm->sprom.et1macaddr))
 		memcpy(bcm->net_dev->dev_addr, bcm->sprom.et1macaddr, 6);
 	else
 		memcpy(bcm->net_dev->dev_addr, bcm->sprom.il0macaddr, 6);
 
-	bcm43xx_geo_init(bcm);
-
 	snprintf(bcm->nick, IW_ESSID_MAX_SIZE,
 		 "Broadcom %04X", bcm->chip_id);
 
@@ -3522,6 +3535,7 @@ static inline int bcm43xx_tx(struct bcm43xx_private *bcm,
 		err = bcm43xx_pio_tx(bcm, txb);
 	else
 		err = bcm43xx_dma_tx(bcm, txb);
+	bcm->net_dev->trans_start = jiffies;
 
 	return err;
 }
@@ -3935,9 +3949,6 @@ static int bcm43xx_resume(struct pci_dev *pdev)
 
 	netif_device_attach(net_dev);
 	
-	/*FIXME: This should be handled by softmac instead. */
-	schedule_work(&bcm->softmac->associnfo.work);
-
 	dprintk(KERN_INFO PFX "Device resumed.\n");
 
 	return 0;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
index eca79a38594..30a202b258b 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
@@ -118,12 +118,14 @@ int bcm43xx_channel_to_freq(struct bcm43xx_private *bcm,
 static inline
 int bcm43xx_is_valid_channel_a(u8 channel)
 {
-	return (channel <= 200);
+	return (channel >= IEEE80211_52GHZ_MIN_CHANNEL
+	       && channel <= IEEE80211_52GHZ_MAX_CHANNEL);
 }
 static inline
 int bcm43xx_is_valid_channel_bg(u8 channel)
 {
-	return (channel >= 1 && channel <= 14);
+	return (channel >= IEEE80211_24GHZ_MIN_CHANNEL
+	       && channel <= IEEE80211_24GHZ_MAX_CHANNEL);
 }
 static inline
 int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index 0a66f43ca0c..b0abac51553 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -1287,7 +1287,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
 	if (radio->revision == 8)
 		bcm43xx_phy_write(bcm, 0x0805, 0x3230);
 	bcm43xx_phy_init_pctl(bcm);
-	if (bcm->chip_id == 0x4306 && bcm->chip_package != 2) {
+	if (bcm->chip_id == 0x4306 && bcm->chip_package == 2) {
 		bcm43xx_phy_write(bcm, 0x0429,
 				  bcm43xx_phy_read(bcm, 0x0429) & 0xBFFF);
 		bcm43xx_phy_write(bcm, 0x04C3,
@@ -2151,6 +2151,7 @@ int bcm43xx_phy_init_tssi2dbm_table(struct bcm43xx_private *bcm)
 				phy->tssi2dbm = NULL;
 				printk(KERN_ERR PFX "Could not generate "
 						    "tssi2dBm table\n");
+				kfree(dyn_tssi2dbm);
 				return -ENODEV;
 			}
 		phy->tssi2dbm = dyn_tssi2dbm;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.c b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
index c59ddd40680..0aa1bd269a2 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
@@ -27,6 +27,7 @@
 #include "bcm43xx_pio.h"
 #include "bcm43xx_main.h"
 #include "bcm43xx_xmit.h"
+#include "bcm43xx_power.h"
 
 #include <linux/delay.h>
 
@@ -44,10 +45,10 @@ static void tx_octet(struct bcm43xx_pioqueue *queue,
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
 				  octet);
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
-				  BCM43xx_PIO_TXCTL_WRITEHI);
+				  BCM43xx_PIO_TXCTL_WRITELO);
 	} else {
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
-				  BCM43xx_PIO_TXCTL_WRITEHI);
+				  BCM43xx_PIO_TXCTL_WRITELO);
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
 				  octet);
 	}
@@ -103,7 +104,7 @@ static void tx_complete(struct bcm43xx_pioqueue *queue,
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
 				  skb->data[skb->len - 1]);
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
-				  BCM43xx_PIO_TXCTL_WRITEHI |
+				  BCM43xx_PIO_TXCTL_WRITELO |
 				  BCM43xx_PIO_TXCTL_COMPLETE);
 	} else {
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
@@ -112,9 +113,10 @@ static void tx_complete(struct bcm43xx_pioqueue *queue,
 }
 
 static u16 generate_cookie(struct bcm43xx_pioqueue *queue,
-			   int packetindex)
+			   struct bcm43xx_pio_txpacket *packet)
 {
 	u16 cookie = 0x0000;
+	int packetindex;
 
 	/* We use the upper 4 bits for the PIO
 	 * controller ID and the lower 12 bits
@@ -135,6 +137,7 @@ static u16 generate_cookie(struct bcm43xx_pioqueue *queue,
 	default:
 		assert(0);
 	}
+	packetindex = pio_txpacket_getindex(packet);
 	assert(((u16)packetindex & 0xF000) == 0x0000);
 	cookie |= (u16)packetindex;
 
@@ -184,7 +187,7 @@ static void pio_tx_write_fragment(struct bcm43xx_pioqueue *queue,
 	bcm43xx_generate_txhdr(queue->bcm,
 			       &txhdr, skb->data, skb->len,
 			       (packet->xmitted_frags == 0),
-			       generate_cookie(queue, pio_txpacket_getindex(packet)));
+			       generate_cookie(queue, packet));
 
 	tx_start(queue);
 	octets = skb->len + sizeof(txhdr);
@@ -241,7 +244,7 @@ static int pio_tx_packet(struct bcm43xx_pio_txpacket *packet)
 		queue->tx_devq_packets++;
 		queue->tx_devq_used += octets;
 
-		assert(packet->xmitted_frags <= packet->txb->nr_frags);
+		assert(packet->xmitted_frags < packet->txb->nr_frags);
 		packet->xmitted_frags++;
 		packet->xmitted_octets += octets;
 	}
@@ -257,8 +260,14 @@ static void tx_tasklet(unsigned long d)
 	unsigned long flags;
 	struct bcm43xx_pio_txpacket *packet, *tmp_packet;
 	int err;
+	u16 txctl;
 
 	bcm43xx_lock_mmio(bcm, flags);
+
+	txctl = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL);
+	if (txctl & BCM43xx_PIO_TXCTL_SUSPEND)
+		goto out_unlock;
+
 	list_for_each_entry_safe(packet, tmp_packet, &queue->txqueue, list) {
 		assert(packet->xmitted_frags < packet->txb->nr_frags);
 		if (packet->xmitted_frags == 0) {
@@ -288,6 +297,7 @@ static void tx_tasklet(unsigned long d)
 	next_packet:
 		continue;
 	}
+out_unlock:
 	bcm43xx_unlock_mmio(bcm, flags);
 }
 
@@ -330,12 +340,19 @@ struct bcm43xx_pioqueue * bcm43xx_setup_pioqueue(struct bcm43xx_private *bcm,
 		     (unsigned long)queue);
 
 	value = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
-	value |= BCM43xx_SBF_XFER_REG_BYTESWAP;
+	value &= ~BCM43xx_SBF_XFER_REG_BYTESWAP;
 	bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value);
 
 	qsize = bcm43xx_read16(bcm, queue->mmio_base + BCM43xx_PIO_TXQBUFSIZE);
+	if (qsize == 0) {
+		printk(KERN_ERR PFX "ERROR: This card does not support PIO "
+				    "operation mode. Please use DMA mode "
+				    "(module parameter pio=0).\n");
+		goto err_freequeue;
+	}
 	if (qsize <= BCM43xx_PIO_TXQADJUST) {
-		printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n", qsize);
+		printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n",
+		       qsize);
 		goto err_freequeue;
 	}
 	qsize -= BCM43xx_PIO_TXQADJUST;
@@ -444,15 +461,10 @@ int bcm43xx_pio_tx(struct bcm43xx_private *bcm,
 {
 	struct bcm43xx_pioqueue *queue = bcm43xx_current_pio(bcm)->queue1;
 	struct bcm43xx_pio_txpacket *packet;
-	u16 tmp;
 
 	assert(!queue->tx_suspended);
 	assert(!list_empty(&queue->txfree));
 
-	tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL);
-	if (tmp & BCM43xx_PIO_TXCTL_SUSPEND)
-		return -EBUSY;
-
 	packet = list_entry(queue->txfree.next, struct bcm43xx_pio_txpacket, list);
 	packet->txb = txb;
 	packet->xmitted_frags = 0;
@@ -462,7 +474,7 @@ int bcm43xx_pio_tx(struct bcm43xx_private *bcm,
 	assert(queue->nr_txfree < BCM43xx_PIO_MAXTXPACKETS);
 
 	/* Suspend TX, if we are out of packets in the "free" queue. */
-	if (unlikely(list_empty(&queue->txfree))) {
+	if (list_empty(&queue->txfree)) {
 		netif_stop_queue(queue->bcm->net_dev);
 		queue->tx_suspended = 1;
 	}
@@ -480,15 +492,15 @@ void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm,
 
 	queue = parse_cookie(bcm, status->cookie, &packet);
 	assert(queue);
-//TODO
-if (!queue)
-return;
+
 	free_txpacket(packet, 1);
-	if (unlikely(queue->tx_suspended)) {
+	if (queue->tx_suspended) {
 		queue->tx_suspended = 0;
 		netif_wake_queue(queue->bcm->net_dev);
 	}
-	/* If there are packets on the txqueue, poke the tasklet. */
+	/* If there are packets on the txqueue, poke the tasklet
+	 * to transmit them.
+	 */
 	if (!list_empty(&queue->txqueue))
 		tasklet_schedule(&queue->txtask);
 }
@@ -519,12 +531,9 @@ void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue)
 	int i, preamble_readwords;
 	struct sk_buff *skb;
 
-return;
 	tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXCTL);
-	if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE)) {
-		dprintkl(KERN_ERR PFX "PIO RX: No data available\n");//TODO: remove this printk.
+	if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE))
 		return;
-	}
 	bcm43xx_pio_write(queue, BCM43xx_PIO_RXCTL,
 			  BCM43xx_PIO_RXCTL_DATAAVAILABLE);
 
@@ -538,8 +547,7 @@ return;
 	return;
 data_ready:
 
-//FIXME: endianess in this function.
-	len = le16_to_cpu(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
+	len = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
 	if (unlikely(len > 0x700)) {
 		pio_rx_error(queue, 0, "len > 0x700");
 		return;
@@ -555,7 +563,7 @@ data_ready:
 		preamble_readwords = 18 / sizeof(u16);
 	for (i = 0; i < preamble_readwords; i++) {
 		tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
-		preamble[i + 1] = cpu_to_be16(tmp);//FIXME?
+		preamble[i + 1] = cpu_to_le16(tmp);
 	}
 	rxhdr = (struct bcm43xx_rxhdr *)preamble;
 	rxflags2 = le16_to_cpu(rxhdr->flags2);
@@ -591,16 +599,40 @@ data_ready:
 	}
 	skb_put(skb, len);
 	for (i = 0; i < len - 1; i += 2) {
-		tmp = cpu_to_be16(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
-		*((u16 *)(skb->data + i)) = tmp;
+		tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
+		*((u16 *)(skb->data + i)) = cpu_to_le16(tmp);
 	}
 	if (len % 2) {
 		tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
 		skb->data[len - 1] = (tmp & 0x00FF);
+/* The specs say the following is required, but
+ * it is wrong and corrupts the PLCP. If we don't do
+ * this, the PLCP seems to be correct. So ifdef it out for now.
+ */
+#if 0
 		if (rxflags2 & BCM43xx_RXHDR_FLAGS2_TYPE2FRAME)
-			skb->data[0x20] = (tmp & 0xFF00) >> 8;
+			skb->data[2] = (tmp & 0xFF00) >> 8;
 		else
-			skb->data[0x1E] = (tmp & 0xFF00) >> 8;
+			skb->data[0] = (tmp & 0xFF00) >> 8;
+#endif
 	}
+	skb_trim(skb, len - IEEE80211_FCS_LEN);
 	bcm43xx_rx(queue->bcm, skb, rxhdr);
 }
+
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue)
+{
+	bcm43xx_power_saving_ctl_bits(queue->bcm, -1, 1);
+	bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+			  bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL)
+			  | BCM43xx_PIO_TXCTL_SUSPEND);
+}
+
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue)
+{
+	bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+			  bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL)
+			  & ~BCM43xx_PIO_TXCTL_SUSPEND);
+	bcm43xx_power_saving_ctl_bits(queue->bcm, -1, -1);
+	tasklet_schedule(&queue->txtask);
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.h b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
index 970627bc176..dfc78209e3a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
@@ -14,8 +14,8 @@
 #define BCM43xx_PIO_RXCTL		0x08
 #define BCM43xx_PIO_RXDATA		0x0A
 
-#define BCM43xx_PIO_TXCTL_WRITEHI	(1 << 0)
-#define BCM43xx_PIO_TXCTL_WRITELO	(1 << 1)
+#define BCM43xx_PIO_TXCTL_WRITELO	(1 << 0)
+#define BCM43xx_PIO_TXCTL_WRITEHI	(1 << 1)
 #define BCM43xx_PIO_TXCTL_COMPLETE	(1 << 2)
 #define BCM43xx_PIO_TXCTL_INIT		(1 << 3)
 #define BCM43xx_PIO_TXCTL_SUSPEND	(1 << 7)
@@ -95,6 +95,7 @@ void bcm43xx_pio_write(struct bcm43xx_pioqueue *queue,
 		       u16 offset, u16 value)
 {
 	bcm43xx_write16(queue->bcm, queue->mmio_base + offset, value);
+	mmiowb();
 }
 
 
@@ -107,6 +108,9 @@ void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm,
 				   struct bcm43xx_xmitstatus *status);
 void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue);
 
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue);
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue);
+
 #else /* CONFIG_BCM43XX_PIO */
 
 static inline
@@ -133,6 +137,14 @@ static inline
 void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue)
 {
 }
+static inline
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue)
+{
+}
+static inline
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue)
+{
+}
 
 #endif /* CONFIG_BCM43XX_PIO */
 #endif /* BCM43xx_PIO_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_power.c b/drivers/net/wireless/bcm43xx/bcm43xx_power.c
index 3c92b62807c..6569da3a7a3 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_power.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_power.c
@@ -35,77 +35,101 @@
 #include "bcm43xx_main.h"
 
 
+/* Get the Slow Clock Source */
+static int bcm43xx_pctl_get_slowclksrc(struct bcm43xx_private *bcm)
+{
+	u32 tmp;
+	int err;
+
+	assert(bcm->current_core == &bcm->core_chipcommon);
+	if (bcm->current_core->rev < 6) {
+		if (bcm->bustype == BCM43xx_BUSTYPE_PCMCIA ||
+		    bcm->bustype == BCM43xx_BUSTYPE_SB)
+			return BCM43xx_PCTL_CLKSRC_XTALOS;
+		if (bcm->bustype == BCM43xx_BUSTYPE_PCI) {
+			err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
+			assert(!err);
+			if (tmp & 0x10)
+				return BCM43xx_PCTL_CLKSRC_PCI;
+			return BCM43xx_PCTL_CLKSRC_XTALOS;
+		}
+	}
+	if (bcm->current_core->rev < 10) {
+		tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
+		tmp &= 0x7;
+		if (tmp == 0)
+			return BCM43xx_PCTL_CLKSRC_LOPWROS;
+		if (tmp == 1)
+			return BCM43xx_PCTL_CLKSRC_XTALOS;
+		if (tmp == 2)
+			return BCM43xx_PCTL_CLKSRC_PCI;
+	}
+
+	return BCM43xx_PCTL_CLKSRC_XTALOS;
+}
+
 /* Get max/min slowclock frequency
  * as described in http://bcm-specs.sipsolutions.net/PowerControl
  */
 static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
 				       int get_max)
 {
-	int limit = 0;
+	int limit;
+	int clocksrc;
 	int divisor;
-	int selection;
-	int err;
 	u32 tmp;
-	struct bcm43xx_coreinfo *old_core;
 
-	if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
-		goto out;
-	old_core = bcm->current_core;
-	err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
-	if (err)
-		goto out;
+	assert(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL);
+	assert(bcm->current_core == &bcm->core_chipcommon);
 
+	clocksrc = bcm43xx_pctl_get_slowclksrc(bcm);
 	if (bcm->current_core->rev < 6) {
-		if ((bcm->bustype == BCM43xx_BUSTYPE_PCMCIA) ||
-			(bcm->bustype == BCM43xx_BUSTYPE_SB)) {
-			selection = 1;
+		switch (clocksrc) {
+		case BCM43xx_PCTL_CLKSRC_PCI:
+			divisor = 64;
+			break;
+		case BCM43xx_PCTL_CLKSRC_XTALOS:
 			divisor = 32;
-		} else {
-			err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
-			if (err) {
-				printk(KERN_ERR PFX "clockfreqlimit pcicfg read failure\n");
-				goto out_switchback;
-			}
-			if (tmp & 0x10) {
-				/* PCI */
-				selection = 2;
-				divisor = 64;
-			} else {
-				/* XTAL */
-				selection = 1;
-				divisor = 32;
-			}
+			break;
+		default:
+			assert(0);
+			divisor = 1;
 		}
 	} else if (bcm->current_core->rev < 10) {
-		selection = (tmp & 0x07);
-		if (selection) {
+		switch (clocksrc) {
+		case BCM43xx_PCTL_CLKSRC_LOPWROS:
+			divisor = 1;
+			break;
+		case BCM43xx_PCTL_CLKSRC_XTALOS:
+		case BCM43xx_PCTL_CLKSRC_PCI:
 			tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
-			divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
-		} else
+			divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
+			divisor *= 4;
+			break;
+		default:
+			assert(0);
 			divisor = 1;
+		}
 	} else {
 		tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL);
-		divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
-		selection = 1;
+		divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
+		divisor *= 4;
 	}
-	
-	switch (selection) {
-	case 0:
-		/* LPO */
+
+	switch (clocksrc) {
+	case BCM43xx_PCTL_CLKSRC_LOPWROS:
 		if (get_max)
 			limit = 43000;
 		else
 			limit = 25000;
 		break;
-	case 1:
-		/* XTAL */
+	case BCM43xx_PCTL_CLKSRC_XTALOS:
 		if (get_max)
 			limit = 20200000;
 		else
 			limit = 19800000;
 		break;
-	case 2:
-		/* PCI */
+	case BCM43xx_PCTL_CLKSRC_PCI:
 		if (get_max)
 			limit = 34000000;
 		else
@@ -113,17 +137,14 @@ static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
 		break;
 	default:
 		assert(0);
+		limit = 0;
 	}
 	limit /= divisor;
 
-out_switchback:
-	err = bcm43xx_switch_core(bcm, old_core);
-	assert(err == 0);
-
-out:
 	return limit;
 }
 
+
 /* init power control
  * as described in http://bcm-specs.sipsolutions.net/PowerControl
  */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_power.h b/drivers/net/wireless/bcm43xx/bcm43xx_power.h
index 5f63640810b..c966ab3a5a8 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_power.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_power.h
@@ -33,6 +33,15 @@
 
 #include <linux/types.h>
 
+/* Clock sources */
+enum {
+	/* PCI clock */
+	BCM43xx_PCTL_CLKSRC_PCI,
+	/* Crystal slow clock oscillator */
+	BCM43xx_PCTL_CLKSRC_XTALOS,
+	/* Low power oscillator */
+	BCM43xx_PCTL_CLKSRC_LOPWROS,
+};
 
 struct bcm43xx_private;
 
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
index c44d890b949..b438f48e891 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
@@ -71,14 +71,46 @@ static int get_boolean(const char *buf, size_t count)
 	return -EINVAL;
 }
 
+static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len)
+{
+	int i, pos = 0;
+
+	for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
+		pos += snprintf(buf + pos, buf_len - pos - 1,
+				"%04X", swab16(sprom[i]) & 0xFFFF);
+	}
+	pos += snprintf(buf + pos, buf_len - pos - 1, "\n");
+
+	return pos + 1;
+}
+
+static int hex2sprom(u16 *sprom, const char *dump, size_t len)
+{
+	char tmp[5] = { 0 };
+	int cnt = 0;
+	unsigned long parsed;
+
+	if (len < BCM43xx_SPROM_SIZE * sizeof(u16) * 2)
+		return -EINVAL;
+
+	while (cnt < BCM43xx_SPROM_SIZE) {
+		memcpy(tmp, dump, 4);
+		dump += 4;
+		parsed = simple_strtoul(tmp, NULL, 16);
+		sprom[cnt++] = swab16((u16)parsed);
+	}
+
+	return 0;
+}
+
 static ssize_t bcm43xx_attr_sprom_show(struct device *dev,
 				       struct device_attribute *attr,
 				       char *buf)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_sprom);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	u16 *sprom;
 	unsigned long flags;
-	int i, err;
+	int err;
 
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
@@ -91,55 +123,53 @@ static ssize_t bcm43xx_attr_sprom_show(struct device *dev,
 	bcm43xx_lock_mmio(bcm, flags);
 	assert(bcm->initialized);
 	err = bcm43xx_sprom_read(bcm, sprom);
-	if (!err) {
-		for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
-			buf[i * 2] = sprom[i] & 0x00FF;
-			buf[i * 2 + 1] = (sprom[i] & 0xFF00) >> 8;
-		}
-	}
+	if (!err)
+		err = sprom2hex(sprom, buf, PAGE_SIZE);
 	bcm43xx_unlock_mmio(bcm, flags);
 	kfree(sprom);
 
-	return err ? err : BCM43xx_SPROM_SIZE * sizeof(u16);
+	return err;
 }
 
 static ssize_t bcm43xx_attr_sprom_store(struct device *dev,
 					struct device_attribute *attr,
 					const char *buf, size_t count)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_sprom);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	u16 *sprom;
 	unsigned long flags;
-	int i, err;
+	int err;
 
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
-	if (count != BCM43xx_SPROM_SIZE * sizeof(u16))
-		return -EINVAL;
 	sprom = kmalloc(BCM43xx_SPROM_SIZE * sizeof(*sprom),
 			GFP_KERNEL);
 	if (!sprom)
 		return -ENOMEM;
-	for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
-		sprom[i] = buf[i * 2] & 0xFF;
-		sprom[i] |= ((u16)(buf[i * 2 + 1] & 0xFF)) << 8;
-	}
+	err = hex2sprom(sprom, buf, count);
+	if (err)
+		goto out_kfree;
 	bcm43xx_lock_mmio(bcm, flags);
 	assert(bcm->initialized);
 	err = bcm43xx_sprom_write(bcm, sprom);
 	bcm43xx_unlock_mmio(bcm, flags);
+out_kfree:
 	kfree(sprom);
 
 	return err ? err : count;
 
 }
 
+static DEVICE_ATTR(sprom, 0600,
+		   bcm43xx_attr_sprom_show,
+		   bcm43xx_attr_sprom_store);
+
 static ssize_t bcm43xx_attr_interfmode_show(struct device *dev,
 					    struct device_attribute *attr,
 					    char *buf)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_interfmode);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	ssize_t count = 0;
@@ -175,7 +205,7 @@ static ssize_t bcm43xx_attr_interfmode_store(struct device *dev,
 					     struct device_attribute *attr,
 					     const char *buf, size_t count)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_interfmode);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	int mode;
@@ -215,11 +245,15 @@ static ssize_t bcm43xx_attr_interfmode_store(struct device *dev,
 	return err ? err : count;
 }
 
+static DEVICE_ATTR(interference, 0644,
+		   bcm43xx_attr_interfmode_show,
+		   bcm43xx_attr_interfmode_store);
+
 static ssize_t bcm43xx_attr_preamble_show(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_preamble);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	ssize_t count;
@@ -245,7 +279,7 @@ static ssize_t bcm43xx_attr_preamble_store(struct device *dev,
 					   struct device_attribute *attr,
 					   const char *buf, size_t count)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_preamble);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	int value;
@@ -267,56 +301,41 @@ static ssize_t bcm43xx_attr_preamble_store(struct device *dev,
 	return err ? err : count;
 }
 
+static DEVICE_ATTR(shortpreamble, 0644,
+		   bcm43xx_attr_preamble_show,
+		   bcm43xx_attr_preamble_store);
+
 int bcm43xx_sysfs_register(struct bcm43xx_private *bcm)
 {
 	struct device *dev = &bcm->pci_dev->dev;
-	struct bcm43xx_sysfs *sysfs = &bcm->sysfs;
 	int err;
 
 	assert(bcm->initialized);
 
-	sysfs->attr_sprom.attr.name = "sprom";
-	sysfs->attr_sprom.attr.owner = THIS_MODULE;
-	sysfs->attr_sprom.attr.mode = 0600;
-	sysfs->attr_sprom.show = bcm43xx_attr_sprom_show;
-	sysfs->attr_sprom.store = bcm43xx_attr_sprom_store;
-	err = device_create_file(dev, &sysfs->attr_sprom);
+	err = device_create_file(dev, &dev_attr_sprom);
 	if (err)
 		goto out;
-
-	sysfs->attr_interfmode.attr.name = "interference";
-	sysfs->attr_interfmode.attr.owner = THIS_MODULE;
-	sysfs->attr_interfmode.attr.mode = 0600;
-	sysfs->attr_interfmode.show = bcm43xx_attr_interfmode_show;
-	sysfs->attr_interfmode.store = bcm43xx_attr_interfmode_store;
-	err = device_create_file(dev, &sysfs->attr_interfmode);
+	err = device_create_file(dev, &dev_attr_interference);
 	if (err)
 		goto err_remove_sprom;
-
-	sysfs->attr_preamble.attr.name = "shortpreamble";
-	sysfs->attr_preamble.attr.owner = THIS_MODULE;
-	sysfs->attr_preamble.attr.mode = 0600;
-	sysfs->attr_preamble.show = bcm43xx_attr_preamble_show;
-	sysfs->attr_preamble.store = bcm43xx_attr_preamble_store;
-	err = device_create_file(dev, &sysfs->attr_preamble);
+	err = device_create_file(dev, &dev_attr_shortpreamble);
 	if (err)
 		goto err_remove_interfmode;
 
 out:
 	return err;
 err_remove_interfmode:
-	device_remove_file(dev, &sysfs->attr_interfmode);
+	device_remove_file(dev, &dev_attr_interference);
 err_remove_sprom:
-	device_remove_file(dev, &sysfs->attr_sprom);
+	device_remove_file(dev, &dev_attr_sprom);
 	goto out;
 }
 
 void bcm43xx_sysfs_unregister(struct bcm43xx_private *bcm)
 {
 	struct device *dev = &bcm->pci_dev->dev;
-	struct bcm43xx_sysfs *sysfs = &bcm->sysfs;
 
-	device_remove_file(dev, &sysfs->attr_preamble);
-	device_remove_file(dev, &sysfs->attr_interfmode);
-	device_remove_file(dev, &sysfs->attr_sprom);
+	device_remove_file(dev, &dev_attr_shortpreamble);
+	device_remove_file(dev, &dev_attr_interference);
+	device_remove_file(dev, &dev_attr_sprom);
 }
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
index 57f14514e3e..cc701df71e2 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
@@ -1,22 +1,6 @@
 #ifndef BCM43xx_SYSFS_H_
 #define BCM43xx_SYSFS_H_
 
-#include <linux/device.h>
-
-
-struct bcm43xx_sysfs {
-	struct device_attribute attr_sprom;
-	struct device_attribute attr_interfmode;
-	struct device_attribute attr_preamble;
-};
-
-#define devattr_to_bcm(attr, attr_name)	({				\
-	struct bcm43xx_sysfs *__s; struct bcm43xx_private *__p;		\
-	__s = container_of((attr), struct bcm43xx_sysfs, attr_name);	\
-	__p = container_of(__s, struct bcm43xx_private, sysfs);		\
-	__p;								\
-					})
-
 struct bcm43xx_private;
 
 int bcm43xx_sysfs_register(struct bcm43xx_private *bcm);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index 3daee828ef4..b45063974ae 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -182,8 +182,11 @@ static int bcm43xx_wx_set_mode(struct net_device *net_dev,
 		mode = BCM43xx_INITIAL_IWMODE;
 
 	bcm43xx_lock_mmio(bcm, flags);
-	if (bcm->ieee->iw_mode != mode)
-		bcm43xx_set_iwmode(bcm, mode);
+	if (bcm->initialized) {
+		if (bcm->ieee->iw_mode != mode)
+			bcm43xx_set_iwmode(bcm, mode);
+	} else
+		bcm->ieee->iw_mode = mode;
 	bcm43xx_unlock_mmio(bcm, flags);
 
 	return 0;
@@ -962,22 +965,22 @@ static const struct iw_priv_args bcm43xx_priv_wx_args[] = {
 	{
 		.cmd		= PRIV_WX_SET_SHORTPREAMBLE,
 		.set_args	= IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		.name		= "set_shortpreambl",
+		.name		= "set_shortpreamb",
 	},
 	{
 		.cmd		= PRIV_WX_GET_SHORTPREAMBLE,
 		.get_args	= IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
-		.name		= "get_shortpreambl",
+		.name		= "get_shortpreamb",
 	},
 	{
 		.cmd		= PRIV_WX_SET_SWENCRYPTION,
 		.set_args	= IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		.name		= "set_swencryption",
+		.name		= "set_swencrypt",
 	},
 	{
 		.cmd		= PRIV_WX_GET_SWENCRYPTION,
 		.get_args	= IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
-		.name		= "get_swencryption",
+		.name		= "get_swencrypt",
 	},
 	{
 		.cmd		= PRIV_WX_SPROM_WRITE,
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 8b37e824dfc..8399de58189 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1860,7 +1860,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 	memset(&iwe, 0, sizeof(iwe));
 	iwe.cmd = SIOCGIWFREQ;
 	if (scan) {
-		chan = scan->chid;
+		chan = le16_to_cpu(scan->chid);
 	} else if (bss) {
 		chan = bss->chan;
 	} else {
@@ -1868,7 +1868,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 	}
 
 	if (chan > 0) {
-		iwe.u.freq.m = freq_list[le16_to_cpu(chan - 1)] * 100000;
+		iwe.u.freq.m = freq_list[chan - 1] * 100000;
 		iwe.u.freq.e = 1;
 		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
 						  IW_EV_FREQ_LEN);
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 8dfdfbd5966..c2d0b09e041 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -390,7 +390,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
 		}
 	} else {
 		struct {
-			__le16 qual, signal, noise;
+			__le16 qual, signal, noise, unused;
 		} __attribute__ ((packed)) cq;
 
 		err = HERMES_READ_RECORD(hw, USER_BAP,
@@ -812,7 +812,6 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	if (datalen > IEEE80211_DATA_LEN + 12) {
 		printk(KERN_DEBUG "%s: oversized monitor frame, "
 		       "data length = %d\n", dev->name, datalen);
-		err = -EIO;
 		stats->rx_length_errors++;
 		goto update_stats;
 	}
@@ -821,8 +820,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	if (!skb) {
 		printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
 		       dev->name);
-		err = -ENOMEM;
-		goto drop;
+		goto update_stats;
 	}
 
 	/* Copy the 802.11 header to the skb */
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index ff192e96268..dade4b90357 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -4306,7 +4306,7 @@ out:
  * Insertion of the module
  * I'm now quite proud of the multi-device support.
  */
-int init_module(void)
+int __init init_module(void)
 {
 	int ret = -EIO;		/* Return error if no cards found */
 	int i;
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 4e53be9c03a..bbeabe3fc4c 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -535,7 +535,7 @@ pdcs_auto_read(struct subsystem *entry, char *buf, int knob)
 {
 	char *out = buf;
 	struct pdcspath_entry *pathentry;
-	
+
 	if (!entry || !buf)
 		return -EINVAL;
 
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 42b32ff2fca..278f325021e 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -178,6 +178,11 @@ extern struct proc_dir_entry * proc_mckinley_root;
 #define ROPE6_CTL	0x230
 #define ROPE7_CTL	0x238
 
+#define IOC_ROPE0_CFG	0x500	/* pluto only */
+#define   IOC_ROPE_AO	  0x10	/* Allow "Relaxed Ordering" */
+
+
+
 #define HF_ENABLE	0x40
 
 
@@ -1759,19 +1764,33 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
 
 	sba_dev->num_ioc = num_ioc;
 	for (i = 0; i < num_ioc; i++) {
-		/*
-		** Make sure the box crashes if we get any errors on a rope.
-		*/
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE0_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE1_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE2_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE3_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE4_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE5_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE6_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
-
-		/* flush out the writes */
+		unsigned long ioc_hpa = sba_dev->ioc[i].ioc_hpa;
+		unsigned int j;
+
+		for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) {
+
+			/*
+			 * Clear ROPE(N)_CONFIG AO bit.
+			 * Disables "NT Ordering" (~= !"Relaxed Ordering")
+			 * Overrides bit 1 in DMA Hint Sets.
+			 * Improves netperf UDP_STREAM by ~10% for bcm5701.
+			 */
+			if (IS_PLUTO(sba_dev->iodc)) {
+				unsigned long rope_cfg, cfg_val;
+
+				rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j;
+				cfg_val = READ_REG(rope_cfg);
+				cfg_val &= ~IOC_ROPE_AO;
+				WRITE_REG(cfg_val, rope_cfg);
+			}
+
+			/*
+			** Make sure the box crashes on rope errors.
+			*/
+			WRITE_REG(HF_ENABLE, ioc_hpa + ROPE0_CTL + j);
+		}
+
+		/* flush out the last writes */
 		READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
 
 		DBG_INIT("	ioc[%d] ROPE_CFG 0x%Lx  ROPE_DBG 0x%Lx\n",
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 719b863bc20..828eb45062d 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -155,7 +155,7 @@ superio_init(struct pci_dev *pcidev)
 	struct pci_dev *pdev = sio->lio_pdev;
 	u16 word;
 
-        if (sio->suckyio_irq_enabled)                                       
+	if (sio->suckyio_irq_enabled)
 		return;
 
 	BUG_ON(!pdev);
@@ -194,7 +194,7 @@ superio_init(struct pci_dev *pcidev)
 	request_region (sio->acpi_base, 0x1f, "acpi");
 
 	/* Enable the legacy I/O function */
-        pci_read_config_word (pdev, PCI_COMMAND, &word);
+	pci_read_config_word (pdev, PCI_COMMAND, &word);
 	word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
 	pci_write_config_word (pdev, PCI_COMMAND, word);
 
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index d5890027f8a..48bbf32fd98 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -97,7 +97,7 @@ static struct superio_struct {	/* For Super-IO chips autodetection */
 	int io;
 	int irq;
 	int dma;
-} superios[NR_SUPERIOS] __devinitdata = { {0,},};
+} superios[NR_SUPERIOS] = { {0,},};
 
 static int user_specified;
 #if defined(CONFIG_PARPORT_PC_SUPERIO) || \
@@ -1557,7 +1557,7 @@ static int __devinit get_superio_dma (struct parport *p)
 	return PARPORT_DMA_NONE;
 }
 
-static int __devinit get_superio_irq (struct parport *p)
+static int get_superio_irq (struct parport *p)
 {
 	int i=0;
         while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
@@ -1579,7 +1579,7 @@ static int __devinit get_superio_irq (struct parport *p)
  *                         this shall always be the case!)
  *
  */
-static int __devinit parport_SPP_supported(struct parport *pb)
+static int parport_SPP_supported(struct parport *pb)
 {
 	unsigned char r, w;
 
@@ -1660,7 +1660,7 @@ static int __devinit parport_SPP_supported(struct parport *pb)
  * two bits of ECR aren't writable, so we check by writing ECR and
  * reading it back to see if it's what we expect.
  */
-static int __devinit parport_ECR_present(struct parport *pb)
+static int parport_ECR_present(struct parport *pb)
 {
 	struct parport_pc_private *priv = pb->private_data;
 	unsigned char r = 0xc;
@@ -1712,7 +1712,7 @@ static int __devinit parport_ECR_present(struct parport *pb)
  * be misdetected here is rather academic. 
  */
 
-static int __devinit parport_PS2_supported(struct parport *pb)
+static int parport_PS2_supported(struct parport *pb)
 {
 	int ok = 0;
   
@@ -1868,7 +1868,7 @@ static int __devinit parport_ECP_supported(struct parport *pb)
 }
 #endif
 
-static int __devinit parport_ECPPS2_supported(struct parport *pb)
+static int parport_ECPPS2_supported(struct parport *pb)
 {
 	const struct parport_pc_private *priv = pb->private_data;
 	int result;
@@ -1886,7 +1886,7 @@ static int __devinit parport_ECPPS2_supported(struct parport *pb)
 
 /* EPP mode detection  */
 
-static int __devinit parport_EPP_supported(struct parport *pb)
+static int parport_EPP_supported(struct parport *pb)
 {
 	const struct parport_pc_private *priv = pb->private_data;
 
@@ -1931,7 +1931,7 @@ static int __devinit parport_EPP_supported(struct parport *pb)
 	return 1;
 }
 
-static int __devinit parport_ECPEPP_supported(struct parport *pb)
+static int parport_ECPEPP_supported(struct parport *pb)
 {
 	struct parport_pc_private *priv = pb->private_data;
 	int result;
@@ -2073,7 +2073,7 @@ static int __devinit irq_probe_SPP(struct parport *pb)
  * When ECP is available we can autoprobe for IRQs.
  * NOTE: If we can autoprobe it, we can register the IRQ.
  */
-static int __devinit parport_irq_probe(struct parport *pb)
+static int parport_irq_probe(struct parport *pb)
 {
 	struct parport_pc_private *priv = pb->private_data;
 
@@ -2779,7 +2779,7 @@ static struct parport_pc_pci {
 	/* If set, this is called after probing for ports.  If 'failed'
 	 * is non-zero we couldn't use any of the ports. */
 	void (*postinit_hook) (struct pci_dev *pdev, int failed);
-} cards[] __devinitdata = {
+} cards[] = {
 	/* siig_1p_10x */		{ 1, { { 2, 3 }, } },
 	/* siig_2p_10x */		{ 2, { { 2, 3 }, { 4, 5 }, } },
 	/* siig_1p_20x */		{ 1, { { 0, 1 }, } },
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 6e79f5675b0..63800454670 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -360,9 +360,6 @@ static int __init rpaphp_init(void)
 	while ((dn = of_find_node_by_type(dn, "pci")))
 		rpaphp_add_slot(dn);
 
-	if (!num_slots)
-		return -ENODEV;
-
 	return 0;
 }
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a77e79c8c82..9855c4c920b 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -504,6 +504,201 @@ void pci_scan_msi_device(struct pci_dev *dev)
 		nr_reserved_vectors++;
 }
 
+#ifdef CONFIG_PM
+int pci_save_msi_state(struct pci_dev *dev)
+{
+	int pos, i = 0;
+	u16 control;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (pos <= 0 || dev->no_msi)
+		return 0;
+
+	pci_read_config_word(dev, msi_control_reg(pos), &control);
+	if (!(control & PCI_MSI_FLAGS_ENABLE))
+		return 0;
+
+	save_state = kzalloc(sizeof(struct pci_cap_saved_state) + sizeof(u32) * 5,
+		GFP_KERNEL);
+	if (!save_state) {
+		printk(KERN_ERR "Out of memory in pci_save_msi_state\n");
+		return -ENOMEM;
+	}
+	cap = &save_state->data[0];
+
+	pci_read_config_dword(dev, pos, &cap[i++]);
+	control = cap[0] >> 16;
+	pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, &cap[i++]);
+	if (control & PCI_MSI_FLAGS_64BIT) {
+		pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, &cap[i++]);
+		pci_read_config_dword(dev, pos + PCI_MSI_DATA_64, &cap[i++]);
+	} else
+		pci_read_config_dword(dev, pos + PCI_MSI_DATA_32, &cap[i++]);
+	if (control & PCI_MSI_FLAGS_MASKBIT)
+		pci_read_config_dword(dev, pos + PCI_MSI_MASK_BIT, &cap[i++]);
+	disable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
+	save_state->cap_nr = PCI_CAP_ID_MSI;
+	pci_add_saved_cap(dev, save_state);
+	return 0;
+}
+
+void pci_restore_msi_state(struct pci_dev *dev)
+{
+	int i = 0, pos;
+	u16 control;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	save_state = pci_find_saved_cap(dev, PCI_CAP_ID_MSI);
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (!save_state || pos <= 0)
+		return;
+	cap = &save_state->data[0];
+
+	control = cap[i++] >> 16;
+	pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, cap[i++]);
+	if (control & PCI_MSI_FLAGS_64BIT) {
+		pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, cap[i++]);
+		pci_write_config_dword(dev, pos + PCI_MSI_DATA_64, cap[i++]);
+	} else
+		pci_write_config_dword(dev, pos + PCI_MSI_DATA_32, cap[i++]);
+	if (control & PCI_MSI_FLAGS_MASKBIT)
+		pci_write_config_dword(dev, pos + PCI_MSI_MASK_BIT, cap[i++]);
+	pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
+	enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
+	pci_remove_saved_cap(save_state);
+	kfree(save_state);
+}
+
+int pci_save_msix_state(struct pci_dev *dev)
+{
+	int pos;
+	u16 control;
+	struct pci_cap_saved_state *save_state;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (pos <= 0 || dev->no_msi)
+		return 0;
+
+	pci_read_config_word(dev, msi_control_reg(pos), &control);
+	if (!(control & PCI_MSIX_FLAGS_ENABLE))
+		return 0;
+	save_state = kzalloc(sizeof(struct pci_cap_saved_state) + sizeof(u16),
+		GFP_KERNEL);
+	if (!save_state) {
+		printk(KERN_ERR "Out of memory in pci_save_msix_state\n");
+		return -ENOMEM;
+	}
+	*((u16 *)&save_state->data[0]) = control;
+
+	disable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
+	save_state->cap_nr = PCI_CAP_ID_MSIX;
+	pci_add_saved_cap(dev, save_state);
+	return 0;
+}
+
+void pci_restore_msix_state(struct pci_dev *dev)
+{
+	u16 save;
+	int pos;
+	int vector, head, tail = 0;
+	void __iomem *base;
+	int j;
+	struct msg_address address;
+	struct msg_data data;
+	struct msi_desc *entry;
+	int temp;
+	struct pci_cap_saved_state *save_state;
+
+	save_state = pci_find_saved_cap(dev, PCI_CAP_ID_MSIX);
+	if (!save_state)
+		return;
+	save = *((u16 *)&save_state->data[0]);
+	pci_remove_saved_cap(save_state);
+	kfree(save_state);
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (pos <= 0)
+		return;
+
+	/* route the table */
+	temp = dev->irq;
+	if (msi_lookup_vector(dev, PCI_CAP_ID_MSIX))
+		return;
+	vector = head = dev->irq;
+	while (head != tail) {
+		entry = msi_desc[vector];
+		base = entry->mask_base;
+		j = entry->msi_attrib.entry_nr;
+
+		msi_address_init(&address);
+		msi_data_init(&data, vector);
+
+		address.lo_address.value &= MSI_ADDRESS_DEST_ID_MASK;
+		address.lo_address.value |= entry->msi_attrib.current_cpu <<
+					MSI_TARGET_CPU_SHIFT;
+
+		writel(address.lo_address.value,
+			base + j * PCI_MSIX_ENTRY_SIZE +
+			PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
+		writel(address.hi_address,
+			base + j * PCI_MSIX_ENTRY_SIZE +
+			PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
+		writel(*(u32*)&data,
+			base + j * PCI_MSIX_ENTRY_SIZE +
+			PCI_MSIX_ENTRY_DATA_OFFSET);
+
+		tail = msi_desc[vector]->link.tail;
+		vector = tail;
+	}
+	dev->irq = temp;
+
+	pci_write_config_word(dev, msi_control_reg(pos), save);
+	enable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
+}
+#endif
+
+static void msi_register_init(struct pci_dev *dev, struct msi_desc *entry)
+{
+	struct msg_address address;
+	struct msg_data data;
+	int pos, vector = dev->irq;
+	u16 control;
+
+   	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	pci_read_config_word(dev, msi_control_reg(pos), &control);
+	/* Configure MSI capability structure */
+	msi_address_init(&address);
+	msi_data_init(&data, vector);
+	entry->msi_attrib.current_cpu = ((address.lo_address.u.dest_id >>
+				MSI_TARGET_CPU_SHIFT) & MSI_TARGET_CPU_MASK);
+	pci_write_config_dword(dev, msi_lower_address_reg(pos),
+			address.lo_address.value);
+	if (is_64bit_address(control)) {
+		pci_write_config_dword(dev,
+			msi_upper_address_reg(pos), address.hi_address);
+		pci_write_config_word(dev,
+			msi_data_reg(pos, 1), *((u32*)&data));
+	} else
+		pci_write_config_word(dev,
+			msi_data_reg(pos, 0), *((u32*)&data));
+	if (entry->msi_attrib.maskbit) {
+		unsigned int maskbits, temp;
+		/* All MSIs are unmasked by default, Mask them all */
+		pci_read_config_dword(dev,
+			msi_mask_bits_reg(pos, is_64bit_address(control)),
+			&maskbits);
+		temp = (1 << multi_msi_capable(control));
+		temp = ((temp - 1) & ~temp);
+		maskbits |= temp;
+		pci_write_config_dword(dev,
+			msi_mask_bits_reg(pos, is_64bit_address(control)),
+			maskbits);
+	}
+}
+
 /**
  * msi_capability_init - configure device's MSI capability structure
  * @dev: pointer to the pci_dev data structure of MSI device function
@@ -516,8 +711,6 @@ void pci_scan_msi_device(struct pci_dev *dev)
 static int msi_capability_init(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
-	struct msg_address address;
-	struct msg_data data;
 	int pos, vector;
 	u16 control;
 
@@ -549,33 +742,8 @@ static int msi_capability_init(struct pci_dev *dev)
 	/* Replace with MSI handler */
 	irq_handler_init(PCI_CAP_ID_MSI, vector, entry->msi_attrib.maskbit);
 	/* Configure MSI capability structure */
-	msi_address_init(&address);
-	msi_data_init(&data, vector);
-	entry->msi_attrib.current_cpu = ((address.lo_address.u.dest_id >>
-				MSI_TARGET_CPU_SHIFT) & MSI_TARGET_CPU_MASK);
-	pci_write_config_dword(dev, msi_lower_address_reg(pos),
-			address.lo_address.value);
-	if (is_64bit_address(control)) {
-		pci_write_config_dword(dev,
-			msi_upper_address_reg(pos), address.hi_address);
-		pci_write_config_word(dev,
-			msi_data_reg(pos, 1), *((u32*)&data));
-	} else
-		pci_write_config_word(dev,
-			msi_data_reg(pos, 0), *((u32*)&data));
-	if (entry->msi_attrib.maskbit) {
-		unsigned int maskbits, temp;
-		/* All MSIs are unmasked by default, Mask them all */
-		pci_read_config_dword(dev,
-			msi_mask_bits_reg(pos, is_64bit_address(control)),
-			&maskbits);
-		temp = (1 << multi_msi_capable(control));
-		temp = ((temp - 1) & ~temp);
-		maskbits |= temp;
-		pci_write_config_dword(dev,
-			msi_mask_bits_reg(pos, is_64bit_address(control)),
-			maskbits);
-	}
+	msi_register_init(dev, entry);
+
 	attach_msi_entry(entry, vector);
 	/* Set MSI enabled bits	 */
 	enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
@@ -625,8 +793,10 @@ static int msix_capability_init(struct pci_dev *dev,
 		if (!entry)
 			break;
 		vector = get_msi_vector(dev);
-		if (vector < 0)
+		if (vector < 0) {
+			kmem_cache_free(msi_cachep, entry);
 			break;
+		}
 
  		j = entries[i].entry;
  		entries[i].vector = vector;
@@ -731,6 +901,7 @@ int pci_enable_msi(struct pci_dev* dev)
 			vector_irq[dev->irq] = -1;
 			nr_released_vectors--;
 			spin_unlock_irqrestore(&msi_lock, flags);
+			msi_register_init(dev, msi_desc[dev->irq]);
 			enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
 			return 0;
 		}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 6917c6cb091..c2ecae5ff0c 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -33,13 +33,10 @@ acpi_query_osc (
 	acpi_status		status;
 	struct acpi_object_list	input;
 	union acpi_object 	in_params[4];
-	struct acpi_buffer	output;
-	union acpi_object 	out_obj;	
+	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object 	*out_obj;
 	u32			osc_dw0;
 
-	/* Setting up output buffer */
-	output.length = sizeof(out_obj) + 3*sizeof(u32);  
-	output.pointer = &out_obj;
 	
 	/* Setting up input parameters */
 	input.count = 4;
@@ -61,12 +58,15 @@ acpi_query_osc (
 			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
 		return status;
 	}
-	if (out_obj.type != ACPI_TYPE_BUFFER) {
+	out_obj = output.pointer;
+
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG  
 			"Evaluate _OSC returns wrong type\n");
-		return AE_TYPE;
+		status = AE_TYPE;
+		goto query_osc_out;
 	}
-	osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
 	if (osc_dw0) {
 		if (osc_dw0 & OSC_REQUEST_ERROR)
 			printk(KERN_DEBUG "_OSC request fails\n"); 
@@ -76,15 +76,21 @@ acpi_query_osc (
 			printk(KERN_DEBUG "_OSC invalid revision\n"); 
 		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
 			/* Update Global Control Set */
-			global_ctrlsets = *((u32 *)(out_obj.buffer.pointer+8));
-			return AE_OK;
+			global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8));
+			status = AE_OK;
+			goto query_osc_out;
 		}
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto query_osc_out;
 	}
 
 	/* Update Global Control Set */
-	global_ctrlsets = *((u32 *)(out_obj.buffer.pointer + 8));
-	return AE_OK;
+	global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+	status = AE_OK;
+
+query_osc_out:
+	kfree(output.pointer);
+	return status;
 }
 
 
@@ -96,14 +102,10 @@ acpi_run_osc (
 	acpi_status		status;
 	struct acpi_object_list	input;
 	union acpi_object 	in_params[4];
-	struct acpi_buffer	output;
-	union acpi_object 	out_obj;	
+	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object 	*out_obj;
 	u32			osc_dw0;
 
-	/* Setting up output buffer */
-	output.length = sizeof(out_obj) + 3*sizeof(u32);  
-	output.pointer = &out_obj;
-	
 	/* Setting up input parameters */
 	input.count = 4;
 	input.pointer = in_params;
@@ -124,12 +126,14 @@ acpi_run_osc (
 			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
 		return status;
 	}
-	if (out_obj.type != ACPI_TYPE_BUFFER) {
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG  
 			"Evaluate _OSC returns wrong type\n");
-		return AE_TYPE;
+		status = AE_TYPE;
+		goto run_osc_out;
 	}
-	osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
 	if (osc_dw0) {
 		if (osc_dw0 & OSC_REQUEST_ERROR)
 			printk(KERN_DEBUG "_OSC request fails\n"); 
@@ -139,11 +143,17 @@ acpi_run_osc (
 			printk(KERN_DEBUG "_OSC invalid revision\n"); 
 		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
 			printk(KERN_DEBUG "_OSC FW not grant req. control\n");
-			return AE_SUPPORT;
+			status = AE_SUPPORT;
+			goto run_osc_out;
 		}
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto run_osc_out;
 	}
-	return AE_OK;
+	status = AE_OK;
+
+run_osc_out:
+	kfree(output.pointer);
+	return status;
 }
 
 /**
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index f22f69ac644..1456759936c 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -271,10 +271,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
 	struct pci_driver * drv = pci_dev->driver;
 	int i = 0;
 
-	if (drv && drv->suspend)
+	if (drv && drv->suspend) {
 		i = drv->suspend(pci_dev, state);
-	else
+		suspend_report_result(drv->suspend, i);
+	} else {
 		pci_save_state(pci_dev);
+	}
 	return i;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index bea1ad1ad5b..2329f941a0d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -307,9 +307,11 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	 * Can enter D0 from any state, but if we can only go deeper 
 	 * to sleep if we're already in a low power state
 	 */
-	if (state != PCI_D0 && dev->current_state > state)
+	if (state != PCI_D0 && dev->current_state > state) {
+		printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
+			__FUNCTION__, pci_name(dev), state, dev->current_state);
 		return -EINVAL;
-	else if (dev->current_state == state) 
+	} else if (dev->current_state == state)
 		return 0;        /* we're already there */
 
 	/* find PCI PM capability in list */
@@ -444,6 +446,10 @@ pci_save_state(struct pci_dev *dev)
 	/* XXX: 100% dword access ok here? */
 	for (i = 0; i < 16; i++)
 		pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+	if ((i = pci_save_msi_state(dev)) != 0)
+		return i;
+	if ((i = pci_save_msix_state(dev)) != 0)
+		return i;
 	return 0;
 }
 
@@ -458,6 +464,8 @@ pci_restore_state(struct pci_dev *dev)
 
 	for (i = 0; i < 16; i++)
 		pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]);
+	pci_restore_msi_state(dev);
+	pci_restore_msix_state(dev);
 	return 0;
 }
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 8f3fb47ea67..30630cbe2fe 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -55,6 +55,17 @@ void pci_no_msi(void);
 static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
 static inline void pci_no_msi(void) { }
 #endif
+#if defined(CONFIG_PCI_MSI) && defined(CONFIG_PM)
+int pci_save_msi_state(struct pci_dev *dev);
+int pci_save_msix_state(struct pci_dev *dev);
+void pci_restore_msi_state(struct pci_dev *dev);
+void pci_restore_msix_state(struct pci_dev *dev);
+#else
+static inline int pci_save_msi_state(struct pci_dev *dev) { return 0; }
+static inline int pci_save_msix_state(struct pci_dev *dev) { return 0; }
+static inline void pci_restore_msi_state(struct pci_dev *dev) {}
+static inline void pci_restore_msix_state(struct pci_dev *dev) {}
+#endif
 
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 4970f47be72..d378478612f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -592,7 +592,7 @@ static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
                 pci_write_config_byte( dev, AMD8131_MISC, tmp);
         }
 } 
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC,         quirk_amd_8131_ioapic ); 
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
 
 static void __init quirk_svw_msi(struct pci_dev *dev)
 {
@@ -634,6 +634,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_vi
  * non-x86 architectures (yes Via exists on PPC among other places),
  * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
  * interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
  */
 static void quirk_via_irq(struct pci_dev *dev)
 {
@@ -642,13 +645,19 @@ static void quirk_via_irq(struct pci_dev *dev)
 	new_irq = dev->irq & 0xf;
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
 	if (new_irq != irq) {
-		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+		printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
 			pci_name(dev), irq, new_irq);
 		udelay(15);	/* unknown if delay really needed */
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
 
 /*
  * VIA VT82C598 has its device ID settable and many BIOSes
@@ -865,6 +874,36 @@ static void __init quirk_eisa_bridge(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82375,	quirk_eisa_bridge );
 
 /*
+ * On the MSI-K8T-Neo2Fir Board, the internal Soundcard is disabled
+ * when a PCI-Soundcard is added. The BIOS only gives Options
+ * "Disabled" and "AUTO". This Quirk Sets the corresponding
+ * Register-Value to enable the Soundcard.
+ */
+static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+{
+	unsigned char val;
+
+	printk(KERN_INFO "PCI: Quirk-MSI-K8T Soundcard On\n");
+	pci_read_config_byte(dev, 0x50, &val);
+	if (val == 0x88 || val == 0xc8) {
+		pci_write_config_byte(dev, 0x50, val & (~0x40));
+
+		/* Verify the Change for Status output */
+		pci_read_config_byte(dev, 0x50, &val);
+		if (val & 0x40)
+			printk(KERN_INFO "PCI: MSI-K8T soundcard still off\n");
+		else
+			printk(KERN_INFO "PCI: MSI-K8T soundcard on\n");
+	} else {
+		printk(KERN_INFO "PCI: Unexpected Value in PCI-Register: "
+					"no Change!\n");
+	}
+
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+
+#ifndef CONFIG_ACPI_SLEEP
+/*
  * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
  * is not activated. The myth is that Asus said that they do not want the
  * users to be irritated by just another PCI Device in the Win98 device
@@ -875,8 +914,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82375,	quirk_e
  * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
  * becomes necessary to do this tweak in two steps -- I've chosen the Host
  * bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
  */
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
 
 static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 {
@@ -921,6 +964,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 		if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
 			switch (dev->subsystem_device) {
 			case 0x1882: /* M6V notebook */
+			case 0x1977: /* A6VA notebook */
 				asus_hides_smbus = 1;
 			}
 		}
@@ -999,6 +1043,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801BA_0,	asu
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_12,	asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_12,	asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801EB_0,	asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc );
 
 static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 {
@@ -1017,6 +1062,8 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6 );
 
+#endif
+
 /*
  * SiS 96x south bridge: BIOS typically hides SMBus device...
  */
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index cba6c9eef28..61cb4b29f55 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -250,7 +250,7 @@ config M32R_CFC_NUM
 
 config PCMCIA_VRC4171
 	tristate "NEC VRC4171 Card Controllers support"
-	depends on VRC4171 && PCMCIA
+	depends on CPU_VR41XX && ISA && PCMCIA
 
 config PCMCIA_VRC4173
 	tristate "NEC VRC4173 CARDU support"
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 67cc5f7d0c9..a4d50940ebe 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -28,8 +28,6 @@
 #include <asm/arch/gpio.h>
 
 
-#define	CF_SIZE		0x30000000	/* CS5+CS6: unavailable */
-
 /*
  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW;
  * some other bit in {A24,A22..A11} is nREG to flag memory access
@@ -76,7 +74,8 @@ static irqreturn_t at91_cf_irq(int irq, void *_cf, struct pt_regs *r)
 		/* kick pccard as needed */
 		if (present != cf->present) {
 			cf->present = present;
-			pr_debug("%s: card %s\n", driver_name, present ? "present" : "gone");
+			pr_debug("%s: card %s\n", driver_name,
+					present ? "present" : "gone");
 			pcmcia_parse_events(&cf->socket, SS_DETECT);
 		}
 	}
@@ -93,7 +92,7 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 
 	cf = container_of(s, struct at91_cf_socket, socket);
 
-	/* NOTE: we assume 3VCARD, not XVCARD...  */
+	/* NOTE: CF is always 3VCARD */
 	if (at91_cf_present(cf)) {
 		int rdy	= cf->board->irq_pin;	/* RDY/nIRQ */
 		int vcc	= cf->board->vcc_pin;
@@ -109,7 +108,8 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 	return 0;
 }
 
-static int at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
+static int
+at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 {
 	struct at91_cf_socket	*cf;
 
@@ -184,7 +184,8 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
 }
 
 /* pcmcia layer maps/unmaps mem regions */
-static int at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
+static int
+at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
 {
 	struct at91_cf_socket	*cf;
 
@@ -218,12 +219,17 @@ static int __init at91_cf_probe(struct device *dev)
 	struct at91_cf_socket	*cf;
 	struct at91_cf_data	*board = dev->platform_data;
 	struct platform_device	*pdev = to_platform_device(dev);
+	struct resource		*io;
 	unsigned int		csa;
 	int			status;
 
 	if (!board || !board->det_pin || !board->rst_pin)
 		return -ENODEV;
 
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io)
+		return -ENODEV;
+
 	cf = kcalloc(1, sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -250,10 +256,14 @@ static int __init at91_cf_probe(struct device *dev)
 	 * REVISIT:  these timings are in terms of MCK cycles, so
 	 * when MCK changes (cpufreq etc) so must these values...
 	 */
-	at91_sys_write(AT91_SMC_CSR(4), AT91_SMC_ACSS_STD | AT91_SMC_DBW_16 | AT91_SMC_BAT | AT91_SMC_WSEN
-				| AT91_SMC_NWS_(32)		/* wait states */
-				| AT91_SMC_RWSETUP_(6)		/* setup time */
-				| AT91_SMC_RWHOLD_(4)		/* hold time */
+	at91_sys_write(AT91_SMC_CSR(4),
+				  AT91_SMC_ACSS_STD
+				| AT91_SMC_DBW_16
+				| AT91_SMC_BAT
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(32)	/* wait states */
+				| AT91_SMC_RWSETUP_(6)	/* setup time */
+				| AT91_SMC_RWHOLD_(4)	/* hold time */
 	);
 
 	/* must be a GPIO; ergo must trigger on both edges */
@@ -274,8 +284,7 @@ static int __init at91_cf_probe(struct device *dev)
 		if (status < 0)
 			goto fail0a;
 		cf->socket.pci_irq = board->irq_pin;
-	}
-	else
+	} else
 		cf->socket.pci_irq = NR_IRQS + 1;
 
 	/* pcmcia layer only remaps "real" memory not iospace */
@@ -284,7 +293,8 @@ static int __init at91_cf_probe(struct device *dev)
 		goto fail1;
 
 	/* reserve CS4, CS5, and CS6 regions; but use just CS4 */
-	if (!request_mem_region(AT91_CF_BASE, CF_SIZE, driver_name))
+	if (!request_mem_region(io->start, io->end + 1 - io->start,
+				driver_name))
 		goto fail1;
 
 	pr_info("%s: irqs det #%d, io #%d\n", driver_name,
@@ -297,7 +307,7 @@ static int __init at91_cf_probe(struct device *dev)
 	cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
 				| SS_CAP_MEM_ALIGN;
 	cf->socket.map_size = SZ_2K;
-	cf->socket.io[0].NumPorts = SZ_2K;
+	cf->socket.io[0].res = io;
 
 	status = pcmcia_register_socket(&cf->socket);
 	if (status < 0)
@@ -307,7 +317,7 @@ static int __init at91_cf_probe(struct device *dev)
 
 fail2:
 	iounmap((void __iomem *) cf->socket.io_offset);
-	release_mem_region(AT91_CF_BASE, CF_SIZE);
+	release_mem_region(io->start, io->end + 1 - io->start);
 fail1:
 	if (board->irq_pin)
 		free_irq(board->irq_pin, cf);
@@ -321,14 +331,15 @@ fail0:
 
 static int __exit at91_cf_remove(struct device *dev)
 {
-	struct at91_cf_socket *cf = dev_get_drvdata(dev);
-	unsigned int csa;
+	struct at91_cf_socket	*cf = dev_get_drvdata(dev);
+	struct resource		*io = cf->socket.io[0].res;
+	unsigned int		csa;
 
 	pcmcia_unregister_socket(&cf->socket);
 	free_irq(cf->board->irq_pin, cf);
 	free_irq(cf->board->det_pin, cf);
 	iounmap((void __iomem *) cf->socket.io_offset);
-	release_mem_region(AT91_CF_BASE, CF_SIZE);
+	release_mem_region(io->start, io->end + 1 - io->start);
 
 	csa = at91_sys_read(AT91_EBI_CSA);
 	at91_sys_write(AT91_EBI_CSA, csa & ~AT91_EBI_CS4A);
@@ -342,8 +353,8 @@ static struct device_driver at91_cf_driver = {
 	.bus		= &platform_bus_type,
 	.probe		= at91_cf_probe,
 	.remove		= __exit_p(at91_cf_remove),
-	.suspend 	= pcmcia_socket_dev_suspend,
-	.resume 	= pcmcia_socket_dev_resume,
+	.suspend	= pcmcia_socket_dev_suspend,
+	.resume		= pcmcia_socket_dev_resume,
 };
 
 /*--------------------------------------------------------------------------*/
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index ae10d1eed65..74b3124e824 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -236,11 +236,11 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv)
 /**
  * pcmcia_load_firmware - load CIS from userspace if device-provided is broken
  * @dev - the pcmcia device which needs a CIS override
- * @filename - requested filename in /lib/firmware/cis/
+ * @filename - requested filename in /lib/firmware/
  *
  * This uses the in-kernel firmware loading mechanism to use a "fake CIS" if
  * the one provided by the card is broken. The firmware files reside in
- * /lib/firmware/cis/ in userspace.
+ * /lib/firmware/ in userspace.
  */
 static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
 {
@@ -298,9 +298,6 @@ static inline int pcmcia_load_firmware(struct pcmcia_device *dev, char * filenam
  *
  * Registers a PCMCIA driver with the PCMCIA bus core.
  */
-static int pcmcia_device_probe(struct device *dev);
-static int pcmcia_device_remove(struct device * dev);
-
 int pcmcia_register_driver(struct pcmcia_driver *driver)
 {
 	if (!driver)
@@ -400,7 +397,7 @@ static int pcmcia_device_probe(struct device * dev)
 	 * call which will then check whether there are two
 	 * pseudo devices, and if not, add the second one.
 	 */
-	did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+	did = p_dev->dev.driver_data;
 	if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
 	    (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
 		pcmcia_add_pseudo_device(p_dev->socket);
@@ -448,7 +445,6 @@ static void pcmcia_card_remove(struct pcmcia_socket *s, struct pcmcia_device *le
 	return;
 }
 
-
 static int pcmcia_device_remove(struct device * dev)
 {
 	struct pcmcia_device *p_dev;
@@ -463,7 +459,7 @@ static int pcmcia_device_remove(struct device * dev)
 	 * pseudo multi-function card, we need to unbind
 	 * all devices
 	 */
-	did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+	did = p_dev->dev.driver_data;
 	if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
 	    (p_dev->socket->device_count != 0) &&
 	    (p_dev->device_no == 0))
@@ -476,6 +472,8 @@ static int pcmcia_device_remove(struct device * dev)
 	if (p_drv->remove)
 	       	p_drv->remove(p_dev);
 
+	p_dev->dev_node = NULL;
+
 	/* check for proper unloading */
 	if (p_dev->_irq || p_dev->_io || p_dev->_locked)
 		printk(KERN_INFO "pcmcia: driver %s did not release config properly\n",
@@ -628,7 +626,7 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f
 		}
 
 	/* Add to the list in pcmcia_bus_socket */
-	list_add_tail(&p_dev->socket_device_list, &s->devices_list);
+	list_add(&p_dev->socket_device_list, &s->devices_list);
 
 	spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
 
@@ -1145,6 +1143,12 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
 {
 	struct pcmcia_socket *s = pcmcia_get_socket(skt);
 
+	if (!s) {
+		printk(KERN_ERR "PCMCIA obtaining reference to socket %p " \
+			"failed, event 0x%x lost!\n", skt, event);
+		return -ENODEV;
+	}
+
 	ds_dbg(1, "ds_event(0x%06x, %d, 0x%p)\n",
 	       event, priority, skt);
 
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index bd0308e8981..a2f05f48515 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -509,7 +509,8 @@ static irqreturn_t i365_count_irq(int irq, void *dev, struct pt_regs *regs)
 static u_int __init test_irq(u_short sock, int irq)
 {
     debug(2, "  testing ISA irq %d\n", irq);
-    if (request_irq(irq, i365_count_irq, 0, "scan", i365_count_irq) != 0)
+    if (request_irq(irq, i365_count_irq, SA_PROBEIRQ, "scan",
+			i365_count_irq) != 0)
 	return 1;
     irq_hits = 0; irq_sock = sock;
     msleep(10);
@@ -561,7 +562,7 @@ static u_int __init isa_scan(u_short sock, u_int mask0)
     } else {
 	/* Fallback: just find interrupts that aren't in use */
 	for (i = 0; i < 16; i++)
-	    if ((mask0 & (1 << i)) && (_check_irq(i, 0) == 0))
+	    if ((mask0 & (1 << i)) && (_check_irq(i, SA_PROBEIRQ) == 0))
 		mask1 |= (1 << i);
 	printk("default");
 	/* If scan failed, default to polled status */
@@ -725,7 +726,7 @@ static void __init add_pcic(int ns, int type)
 	u_int cs_mask = mask & ((cs_irq) ? (1<<cs_irq) : ~(1<<12));
 	for (cs_irq = 15; cs_irq > 0; cs_irq--)
 	    if ((cs_mask & (1 << cs_irq)) &&
-		(_check_irq(cs_irq, 0) == 0))
+		(_check_irq(cs_irq, SA_PROBEIRQ) == 0))
 		break;
 	if (cs_irq) {
 	    grab_irq = 1;
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index c53db7ceda5..738b1ef595a 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -426,7 +426,7 @@ static int ds_open(struct inode *inode, struct file *file)
 
     if (!warning_printed) {
 	    printk(KERN_INFO "pcmcia: Detected deprecated PCMCIA ioctl "
-			"usage.\n");
+			"usage from process: %s.\n", current->comm);
 	    printk(KERN_INFO "pcmcia: This interface will soon be removed from "
 			"the kernel; please expect breakage unless you upgrade "
 			"to new tools.\n");
@@ -601,8 +601,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	    ret = CS_BAD_ARGS;
 	else {
 	    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
-	    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
-	    pcmcia_put_dev(p_dev);
+	    if (p_dev == NULL)
+		    ret = CS_BAD_ARGS;
+	    else {
+		    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
+		    pcmcia_put_dev(p_dev);
+	    }
 	}
 	break;
     case DS_GET_FIRST_TUPLE:
@@ -632,8 +636,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 		    ret = CS_BAD_ARGS;
 	    else {
 		    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
-		    ret = pccard_get_status(s, p_dev, &buf->status);
-		    pcmcia_put_dev(p_dev);
+		    if (p_dev == NULL)
+			    ret = CS_BAD_ARGS;
+		    else {
+			    ret = pccard_get_status(s, p_dev, &buf->status);
+			    pcmcia_put_dev(p_dev);
+		    }
 	    }
 	    break;
     case DS_VALIDATE_CIS:
@@ -665,9 +673,10 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	if (!(buf->conf_reg.Function &&
 	     (buf->conf_reg.Function >= s->functions))) {
 		struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->conf_reg.Function);
-		if (p_dev)
+		if (p_dev) {
 			ret = pcmcia_access_configuration_register(p_dev, &buf->conf_reg);
-		pcmcia_put_dev(p_dev);
+			pcmcia_put_dev(p_dev);
+		}
 	}
 	break;
     case DS_GET_FIRST_REGION:
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 45063b4e5b7..3131bb0a009 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -88,7 +88,6 @@ static int alloc_io_space(struct pcmcia_socket *s, u_int attr, ioaddr_t *base,
 	}
 	if ((s->features & SS_CAP_STATIC_MAP) && s->io_offset) {
 		*base = s->io_offset | (*base & 0x0fff);
-		s->io[0].res->flags = (s->io[0].res->flags & ~IORESOURCE_BITS) | (attr & IORESOURCE_BITS);
 		return 0;
 	}
 	/* Check for an already-allocated window that must conflict with
@@ -209,7 +208,6 @@ int pccard_get_configuration_info(struct pcmcia_socket *s,
 	if (!(s->state & SOCKET_PRESENT))
 		return CS_NO_CARD;
 
-	config->Function = p_dev->func;
 
 #ifdef CONFIG_CARDBUS
 	if (s->state & SOCKET_CARDBUS) {
@@ -223,14 +221,22 @@ int pccard_get_configuration_info(struct pcmcia_socket *s,
 			config->AssignedIRQ = s->irq.AssignedIRQ;
 			if (config->AssignedIRQ)
 				config->Attributes |= CONF_ENABLE_IRQ;
-			config->BasePort1 = s->io[0].res->start;
-			config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1;
+			if (s->io[0].res) {
+				config->BasePort1 = s->io[0].res->start;
+				config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1;
+			}
 		}
 		return CS_SUCCESS;
 	}
 #endif
 
-	c = (p_dev) ? p_dev->function_config : NULL;
+	if (p_dev) {
+		c = p_dev->function_config;
+		config->Function = p_dev->func;
+	} else {
+		c = NULL;
+		config->Function = 0;
+	}
 
 	if ((c == NULL) || !(c->state & CONFIG_LOCKED)) {
 		config->Attributes = 0;
@@ -947,7 +953,5 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev) {
 	pcmcia_release_irq(p_dev, &p_dev->irq);
 	if (&p_dev->win)
 		pcmcia_release_window(p_dev->win);
-
-	p_dev->dev_node = NULL;
 }
 EXPORT_SYMBOL(pcmcia_disable_device);
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 16d1ea7b0a1..247ab837f84 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -589,7 +589,7 @@ static int pd6729_check_irq(int irq, int flags)
 	return 0;
 }
 
-static u_int __init pd6729_isa_scan(void)
+static u_int __devinit pd6729_isa_scan(void)
 {
 	u_int mask0, mask = 0;
 	int i;
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index fd364736895..b7b9e149c5b 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -26,14 +26,6 @@
 #include "soc_common.h"
 
 #define	NO_KEEP_VS 0x0001
-
-/* PCMCIA to Scoop linkage
-
-   There is no easy way to link multiple scoop devices into one
-   single entity for the pxa2xx_pcmcia device so this structure
-   is used which is setup by the platform code
-*/
-struct scoop_pcmcia_config *platform_scoop_config;
 #define SCOOP_DEV platform_scoop_config->devs
 
 static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c
index c4256aa32bc..6fff109bdab 100644
--- a/drivers/pnp/manager.c
+++ b/drivers/pnp/manager.c
@@ -479,7 +479,7 @@ int pnp_auto_config_dev(struct pnp_dev *dev)
 int pnp_start_dev(struct pnp_dev *dev)
 {
 	if (!pnp_can_write(dev)) {
-		pnp_info("Device %s does not supported activation.", dev->dev.bus_id);
+		pnp_info("Device %s does not support activation.", dev->dev.bus_id);
 		return -EINVAL;
 	}
 
@@ -503,7 +503,7 @@ int pnp_start_dev(struct pnp_dev *dev)
 int pnp_stop_dev(struct pnp_dev *dev)
 {
 	if (!pnp_can_disable(dev)) {
-		pnp_info("Device %s does not supported disabling.", dev->dev.bus_id);
+		pnp_info("Device %s does not support disabling.", dev->dev.bus_id);
 		return -EINVAL;
 	}
 	if (dev->protocol->disable(dev)<0) {
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index b1e3e6179e5..2011567005f 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -58,7 +58,7 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	unsigned long data;
 	ssize_t ret;
 
-	if (count < sizeof(unsigned long))
+	if (count != sizeof(unsigned int) && count < sizeof(unsigned long))
 		return -EINVAL;
 
 	add_wait_queue(&rtc->irq_queue, &wait);
@@ -90,11 +90,16 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	if (ret == 0) {
 		/* Check for any data updates */
 		if (rtc->ops->read_callback)
-			data = rtc->ops->read_callback(rtc->class_dev.dev, data);
-
-		ret = put_user(data, (unsigned long __user *)buf);
-		if (ret == 0)
-			ret = sizeof(unsigned long);
+			data = rtc->ops->read_callback(rtc->class_dev.dev,
+						       data);
+
+		if (sizeof(int) != sizeof(long) &&
+		    count == sizeof(unsigned int))
+			ret = put_user(data, (unsigned int __user *)buf) ?:
+				sizeof(unsigned int);
+		else
+			ret = put_user(data, (unsigned long __user *)buf) ?:
+				sizeof(unsigned long);
 	}
 	return ret;
 }
@@ -136,13 +141,13 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 	/* try the driver's ioctl interface */
 	if (ops->ioctl) {
 		err = ops->ioctl(class_dev->dev, cmd, arg);
-		if (err != -EINVAL)
+		if (err != -ENOIOCTLCMD)
 			return err;
 	}
 
 	/* if the driver does not provide the ioctl interface
 	 * or if that particular ioctl was not implemented
-	 * (-EINVAL), we will try to emulate here.
+	 * (-ENOIOCTLCMD), we will try to emulate here.
 	 */
 
 	switch (cmd) {
@@ -228,7 +233,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	default:
-		err = -EINVAL;
+		err = -ENOTTY;
 		break;
 	}
 
diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c
index f6e7ee04f3d..8c0d1a6739a 100644
--- a/drivers/rtc/rtc-m48t86.c
+++ b/drivers/rtc/rtc-m48t86.c
@@ -48,33 +48,33 @@ static int m48t86_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct m48t86_ops *ops = pdev->dev.platform_data;
 
-	reg = ops->readb(M48T86_REG_B);
+	reg = ops->readbyte(M48T86_REG_B);
 
 	if (reg & M48T86_REG_B_DM) {
 		/* data (binary) mode */
-		tm->tm_sec	= ops->readb(M48T86_REG_SEC);
-		tm->tm_min	= ops->readb(M48T86_REG_MIN);
-		tm->tm_hour	= ops->readb(M48T86_REG_HOUR) & 0x3F;
-		tm->tm_mday	= ops->readb(M48T86_REG_DOM);
+		tm->tm_sec	= ops->readbyte(M48T86_REG_SEC);
+		tm->tm_min	= ops->readbyte(M48T86_REG_MIN);
+		tm->tm_hour	= ops->readbyte(M48T86_REG_HOUR) & 0x3F;
+		tm->tm_mday	= ops->readbyte(M48T86_REG_DOM);
 		/* tm_mon is 0-11 */
-		tm->tm_mon	= ops->readb(M48T86_REG_MONTH) - 1;
-		tm->tm_year	= ops->readb(M48T86_REG_YEAR) + 100;
-		tm->tm_wday	= ops->readb(M48T86_REG_DOW);
+		tm->tm_mon	= ops->readbyte(M48T86_REG_MONTH) - 1;
+		tm->tm_year	= ops->readbyte(M48T86_REG_YEAR) + 100;
+		tm->tm_wday	= ops->readbyte(M48T86_REG_DOW);
 	} else {
 		/* bcd mode */
-		tm->tm_sec	= BCD2BIN(ops->readb(M48T86_REG_SEC));
-		tm->tm_min	= BCD2BIN(ops->readb(M48T86_REG_MIN));
-		tm->tm_hour	= BCD2BIN(ops->readb(M48T86_REG_HOUR) & 0x3F);
-		tm->tm_mday	= BCD2BIN(ops->readb(M48T86_REG_DOM));
+		tm->tm_sec	= BCD2BIN(ops->readbyte(M48T86_REG_SEC));
+		tm->tm_min	= BCD2BIN(ops->readbyte(M48T86_REG_MIN));
+		tm->tm_hour	= BCD2BIN(ops->readbyte(M48T86_REG_HOUR) & 0x3F);
+		tm->tm_mday	= BCD2BIN(ops->readbyte(M48T86_REG_DOM));
 		/* tm_mon is 0-11 */
-		tm->tm_mon	= BCD2BIN(ops->readb(M48T86_REG_MONTH)) - 1;
-		tm->tm_year	= BCD2BIN(ops->readb(M48T86_REG_YEAR)) + 100;
-		tm->tm_wday	= BCD2BIN(ops->readb(M48T86_REG_DOW));
+		tm->tm_mon	= BCD2BIN(ops->readbyte(M48T86_REG_MONTH)) - 1;
+		tm->tm_year	= BCD2BIN(ops->readbyte(M48T86_REG_YEAR)) + 100;
+		tm->tm_wday	= BCD2BIN(ops->readbyte(M48T86_REG_DOW));
 	}
 
 	/* correct the hour if the clock is in 12h mode */
 	if (!(reg & M48T86_REG_B_H24))
-		if (ops->readb(M48T86_REG_HOUR) & 0x80)
+		if (ops->readbyte(M48T86_REG_HOUR) & 0x80)
 			tm->tm_hour += 12;
 
 	return 0;
@@ -86,35 +86,35 @@ static int m48t86_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct m48t86_ops *ops = pdev->dev.platform_data;
 
-	reg = ops->readb(M48T86_REG_B);
+	reg = ops->readbyte(M48T86_REG_B);
 
 	/* update flag and 24h mode */
 	reg |= M48T86_REG_B_SET | M48T86_REG_B_H24;
-	ops->writeb(reg, M48T86_REG_B);
+	ops->writebyte(reg, M48T86_REG_B);
 
 	if (reg & M48T86_REG_B_DM) {
 		/* data (binary) mode */
-		ops->writeb(tm->tm_sec, M48T86_REG_SEC);
-		ops->writeb(tm->tm_min, M48T86_REG_MIN);
-		ops->writeb(tm->tm_hour, M48T86_REG_HOUR);
-		ops->writeb(tm->tm_mday, M48T86_REG_DOM);
-		ops->writeb(tm->tm_mon + 1, M48T86_REG_MONTH);
-		ops->writeb(tm->tm_year % 100, M48T86_REG_YEAR);
-		ops->writeb(tm->tm_wday, M48T86_REG_DOW);
+		ops->writebyte(tm->tm_sec, M48T86_REG_SEC);
+		ops->writebyte(tm->tm_min, M48T86_REG_MIN);
+		ops->writebyte(tm->tm_hour, M48T86_REG_HOUR);
+		ops->writebyte(tm->tm_mday, M48T86_REG_DOM);
+		ops->writebyte(tm->tm_mon + 1, M48T86_REG_MONTH);
+		ops->writebyte(tm->tm_year % 100, M48T86_REG_YEAR);
+		ops->writebyte(tm->tm_wday, M48T86_REG_DOW);
 	} else {
 		/* bcd mode */
-		ops->writeb(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
-		ops->writeb(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
-		ops->writeb(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
-		ops->writeb(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
-		ops->writeb(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
-		ops->writeb(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
-		ops->writeb(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
+		ops->writebyte(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
+		ops->writebyte(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
+		ops->writebyte(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
+		ops->writebyte(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
+		ops->writebyte(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
+		ops->writebyte(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
+		ops->writebyte(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
 	}
 
 	/* update ended */
 	reg &= ~M48T86_REG_B_SET;
-	ops->writeb(reg, M48T86_REG_B);
+	ops->writebyte(reg, M48T86_REG_B);
 
 	return 0;
 }
@@ -125,12 +125,12 @@ static int m48t86_rtc_proc(struct device *dev, struct seq_file *seq)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct m48t86_ops *ops = pdev->dev.platform_data;
 
-	reg = ops->readb(M48T86_REG_B);
+	reg = ops->readbyte(M48T86_REG_B);
 
 	seq_printf(seq, "mode\t\t: %s\n",
 		 (reg & M48T86_REG_B_DM) ? "binary" : "bcd");
 
-	reg = ops->readb(M48T86_REG_D);
+	reg = ops->readbyte(M48T86_REG_D);
 
 	seq_printf(seq, "battery\t\t: %s\n",
 		 (reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");
@@ -157,7 +157,7 @@ static int __devinit m48t86_rtc_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, rtc);
 
 	/* read battery status */
-	reg = ops->readb(M48T86_REG_D);
+	reg = ops->readbyte(M48T86_REG_D);
 	dev_info(&dev->dev, "battery %s\n",
 		(reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");
 
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index a23ec54989f..a997529f892 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -178,9 +178,9 @@ static int sa1100_rtc_open(struct device *dev)
 	return 0;
 
  fail_pi:
-	free_irq(IRQ_RTCAlrm, NULL);
+	free_irq(IRQ_RTCAlrm, dev);
  fail_ai:
-	free_irq(IRQ_RTC1Hz, NULL);
+	free_irq(IRQ_RTC1Hz, dev);
  fail_ui:
 	return ret;
 }
@@ -247,7 +247,7 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
 		rtc_freq = arg;
 		return 0;
 	}
-	return -EINVAL;
+	return -ENOIOCTLCMD;
 }
 
 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -295,7 +295,7 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
-	seq_printf(seq, "trim/divider\t: 0x%08x\n", RTTR);
+	seq_printf(seq, "trim/divider\t: 0x%08lx\n", RTTR);
 	seq_printf(seq, "alarm_IRQ\t: %s\n",
 			(RTSR & RTSR_ALE) ? "yes" : "no" );
 	seq_printf(seq, "update_IRQ\t: %s\n",
diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index e1f7e8e86da..e1fa5fe7901 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -71,7 +71,7 @@ static int test_rtc_ioctl(struct device *dev, unsigned int cmd,
 		return 0;
 
 	default:
-		return -EINVAL;
+		return -ENOIOCTLCMD;
 	}
 }
 
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index 4d49fd50119..277596c302e 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -270,7 +270,7 @@ static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
 		epoch = arg;
 		break;
 	default:
-		return -EINVAL;
+		return -ENOIOCTLCMD;
 	}
 
 	return 0;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index a3bfebcf31e..cfb1fff3787 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -315,6 +315,11 @@ dasd_increase_state(struct dasd_device *device)
 		rc = dasd_state_basic_to_ready(device);
 
 	if (!rc &&
+	    device->state == DASD_STATE_UNFMT &&
+	    device->target > DASD_STATE_UNFMT)
+		rc = -EPERM;
+
+	if (!rc &&
 	    device->state == DASD_STATE_READY &&
 	    device->target >= DASD_STATE_ONLINE)
 		rc = dasd_state_ready_to_online(device);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index c1c6f138115..216bc4fba19 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -45,6 +45,7 @@ struct dasd_devmap {
         unsigned int devindex;
         unsigned short features;
 	struct dasd_device *device;
+	struct dasd_uid uid;
 };
 
 /*
@@ -716,6 +717,68 @@ dasd_discipline_show(struct device *dev, struct device_attribute *attr, char *bu
 
 static DEVICE_ATTR(discipline, 0444, dasd_discipline_show, NULL);
 
+static ssize_t
+dasd_alias_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	int alias;
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap))
+		alias = devmap->uid.alias;
+	else
+		alias = 0;
+	spin_unlock(&dasd_devmap_lock);
+
+	return sprintf(buf, alias ? "1\n" : "0\n");
+}
+
+static DEVICE_ATTR(alias, 0444, dasd_alias_show, NULL);
+
+static ssize_t
+dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	char *vendor;
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap) && strlen(devmap->uid.vendor) > 0)
+		vendor = devmap->uid.vendor;
+	else
+		vendor = "";
+	spin_unlock(&dasd_devmap_lock);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", vendor);
+}
+
+static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
+
+#define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial    */ 14 + 1 +\
+		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1)
+
+static ssize_t
+dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	char uid[UID_STRLEN];
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap) && strlen(devmap->uid.vendor) > 0)
+		snprintf(uid, sizeof(uid), "%s.%s.%04x.%02x",
+			 devmap->uid.vendor, devmap->uid.serial,
+			 devmap->uid.ssid, devmap->uid.unit_addr);
+	else
+		uid[0] = 0;
+	spin_unlock(&dasd_devmap_lock);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", uid);
+}
+
+static DEVICE_ATTR(uid, 0444, dasd_uid_show, NULL);
+
 /*
  * extended error-reporting
  */
@@ -759,6 +822,9 @@ static DEVICE_ATTR(eer_enabled, 0644, dasd_eer_show, dasd_eer_store);
 static struct attribute * dasd_attrs[] = {
 	&dev_attr_readonly.attr,
 	&dev_attr_discipline.attr,
+	&dev_attr_alias.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_uid.attr,
 	&dev_attr_use_diag.attr,
 	&dev_attr_eer_enabled.attr,
 	NULL,
@@ -768,6 +834,42 @@ static struct attribute_group dasd_attr_group = {
 	.attrs = dasd_attrs,
 };
 
+
+/*
+ * Return copy of the device unique identifier.
+ */
+int
+dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid)
+{
+	struct dasd_devmap *devmap;
+
+	devmap = dasd_find_busid(cdev->dev.bus_id);
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+	spin_lock(&dasd_devmap_lock);
+	*uid = devmap->uid;
+	spin_unlock(&dasd_devmap_lock);
+	return 0;
+}
+
+/*
+ * Register the given device unique identifier into devmap struct.
+ */
+int
+dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid)
+{
+	struct dasd_devmap *devmap;
+
+	devmap = dasd_find_busid(cdev->dev.bus_id);
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+	spin_lock(&dasd_devmap_lock);
+	devmap->uid = *uid;
+	spin_unlock(&dasd_devmap_lock);
+	return 0;
+}
+EXPORT_SYMBOL(dasd_set_uid);
+
 /*
  * Return value of the specified feature.
  */
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index ee09ef33d08..7d5a6cee4bd 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -446,6 +446,39 @@ dasd_eckd_cdl_reclen(int recid)
 	return LABEL_SIZE;
 }
 
+/*
+ * Generate device unique id that specifies the physical device.
+ */
+static int
+dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+{
+	struct dasd_eckd_private *private;
+	struct dasd_eckd_confdata *confdata;
+
+	private = (struct dasd_eckd_private *) device->private;
+	if (!private)
+		return -ENODEV;
+	confdata = &private->conf_data;
+	if (!confdata)
+		return -ENODEV;
+
+	memset(uid, 0, sizeof(struct dasd_uid));
+	strncpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+		sizeof(uid->vendor) - 1);
+	EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
+	strncpy(uid->serial, confdata->ned1.HDA_location,
+		sizeof(uid->serial) - 1);
+	EBCASC(uid->serial, sizeof(uid->serial) - 1);
+	uid->ssid = confdata->neq.subsystemID;
+	if (confdata->ned2.sneq.flags == 0x40) {
+		uid->alias = 1;
+		uid->unit_addr = confdata->ned2.sneq.base_unit_addr;
+	} else
+		uid->unit_addr = confdata->ned1.unit_addr;
+
+	return 0;
+}
+
 static int
 dasd_eckd_read_conf(struct dasd_device *device)
 {
@@ -507,11 +540,15 @@ dasd_eckd_read_conf(struct dasd_device *device)
 	return 0;
 }
 
-
+/*
+ * Check device characteristics.
+ * If the device is accessible using ECKD discipline, the device is enabled.
+ */
 static int
 dasd_eckd_check_characteristics(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private;
+	struct dasd_uid uid;
 	void *rdc_data;
 	int rc;
 
@@ -536,6 +573,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 
 	/* Read Device Characteristics */
 	rdc_data = (void *) &(private->rdc_data);
+	memset(rdc_data, 0, sizeof(rdc_data));
 	rc = read_dev_chars(device->cdev, &rdc_data, 64);
 	if (rc) {
 		DEV_MESSAGE(KERN_WARNING, device,
@@ -556,8 +594,17 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 
 	/* Read Configuration Data */
 	rc = dasd_eckd_read_conf (device);
-	return rc;
+	if (rc)
+		return rc;
+
+	/* Generate device unique id and register in devmap */
+	rc = dasd_eckd_generate_uid(device, &uid);
+	if (rc)
+		return rc;
 
+	rc = dasd_set_uid(device->cdev, &uid);
+
+	return rc;
 }
 
 static struct dasd_ccw_req *
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index ad8524bb7bb..d5734e976e1 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -228,26 +228,36 @@ struct dasd_eckd_confdata {
 		unsigned char HDA_manufacturer[3];
 		unsigned char HDA_location[2];
 		unsigned char HDA_seqno[12];
-		__u16 ID;
+		__u8 ID;
+		__u8 unit_addr;
 	} __attribute__ ((packed)) ned1;
-	struct {
+	union {
 		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char dev_type[6];
-		unsigned char dev_model[3];
-		unsigned char DASD_manufacturer[3];
-		unsigned char DASD_location[2];
-		unsigned char DASD_seqno[12];
-		__u16 ID;
+			struct {
+				unsigned char identifier:2;
+				unsigned char token_id:1;
+				unsigned char sno_valid:1;
+				unsigned char subst_sno:1;
+				unsigned char recNED:1;
+				unsigned char emuNED:1;
+				unsigned char reserved:1;
+			} __attribute__ ((packed)) flags;
+			__u8 descriptor;
+			__u8 reserved[2];
+			unsigned char dev_type[6];
+			unsigned char dev_model[3];
+			unsigned char DASD_manufacturer[3];
+			unsigned char DASD_location[2];
+			unsigned char DASD_seqno[12];
+			__u16 ID;
+		} __attribute__ ((packed)) ned;
+		struct {
+			unsigned char flags;            /* byte  0    */
+			unsigned char res2[7];          /* byte  1- 7 */
+			unsigned char sua_flags;	/* byte  8    */
+			__u8 base_unit_addr;            /* byte  9    */
+			unsigned char res3[22];	        /* byte 10-31 */
+		} __attribute__ ((packed)) sneq;
 	} __attribute__ ((packed)) ned2;
 	struct {
 		struct {
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 4293ba82752..d4b13e300a7 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -268,6 +268,16 @@ struct dasd_discipline {
 
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
 
+/*
+ * Unique identifier for dasd device.
+ */
+struct dasd_uid {
+	__u8 alias;
+	char vendor[4];
+	char serial[15];
+	__u16 ssid;
+	__u8 unit_addr;
+};
 
 /*
  * Notification numbers for extended error reporting notifications:
@@ -516,6 +526,8 @@ void dasd_devmap_exit(void);
 struct dasd_device *dasd_create_device(struct ccw_device *);
 void dasd_delete_device(struct dasd_device *);
 
+int dasd_get_uid(struct ccw_device *, struct dasd_uid *);
+int dasd_set_uid(struct ccw_device *, struct dasd_uid *);
 int dasd_get_feature(struct ccw_device *, int);
 int dasd_set_feature(struct ccw_device *, int, int);
 
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index c3915f60a3a..d71ef1adea5 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -230,14 +230,16 @@ tape_3590_read_attmsg(struct tape_device *device)
  * These functions are used to schedule follow-up actions from within an
  * interrupt context (like unsolicited interrupts).
  */
+struct work_handler_data {
+	struct tape_device *device;
+	enum tape_op        op;
+	struct work_struct  work;
+};
+
 static void
 tape_3590_work_handler(void *data)
 {
-	struct {
-		struct tape_device *device;
-		enum tape_op op;
-		struct work_struct work;
-	} *p = data;
+	struct work_handler_data *p = data;
 
 	switch (p->op) {
 	case TO_MSEN:
@@ -257,11 +259,7 @@ tape_3590_work_handler(void *data)
 static int
 tape_3590_schedule_work(struct tape_device *device, enum tape_op op)
 {
-	struct {
-		struct tape_device *device;
-		enum tape_op op;
-		struct work_struct work;
-	} *p;
+	struct work_handler_data *p;
 
 	if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
 		return -ENOMEM;
@@ -316,7 +314,7 @@ tape_3590_bread(struct tape_device *device, struct request *req)
 
 	rq_for_each_bio(bio, req) {
 		bio_for_each_segment(bv, bio, i) {
-			dst = kmap(bv->bv_page) + bv->bv_offset;
+			dst = page_address(bv->bv_page) + bv->bv_offset;
 			for (off = 0; off < bv->bv_len;
 			     off += TAPEBLOCK_HSEC_SIZE) {
 				ccw->flags = CCW_FLAG_CC;
@@ -1168,6 +1166,7 @@ tape_3590_setup_device(struct tape_device *device)
 static void
 tape_3590_cleanup_device(struct tape_device *device)
 {
+	flush_scheduled_work();
 	tape_std_unassign(device);
 
 	kfree(device->discdata);
@@ -1234,6 +1233,7 @@ static struct tape_discipline tape_discipline_3590 = {
 
 static struct ccw_device_id tape_3590_ids[] = {
 	{CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info = tape_3590},
+	{CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info = tape_3592},
 	{ /* end of list */ }
 };
 
diff --git a/drivers/s390/char/tape_std.h b/drivers/s390/char/tape_std.h
index 2d311798edf..1fc95235934 100644
--- a/drivers/s390/char/tape_std.h
+++ b/drivers/s390/char/tape_std.h
@@ -153,6 +153,7 @@ enum s390_tape_type {
         tape_3480,
         tape_3490,
         tape_3590,
+        tape_3592,
 };
 
 #endif // _TAPE_STD_H
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 6412b2c3edd..72187e54dca 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -242,28 +242,10 @@ s390_subchannel_remove_chpid(struct device *dev, void *data)
 	if (sch->vpm == mask)
 		goto out_unreg;
 
-	if ((sch->schib.scsw.actl & (SCSW_ACTL_CLEAR_PEND |
-				     SCSW_ACTL_HALT_PEND |
-				     SCSW_ACTL_START_PEND |
-				     SCSW_ACTL_RESUME_PEND)) &&
-	    (sch->schib.pmcw.lpum == mask)) {
-		int cc = cio_cancel(sch);
-		
-		if (cc == -ENODEV)
-			goto out_unreg;
-
-		if (cc == -EINVAL) {
-			cc = cio_clear(sch);
-			if (cc == -ENODEV)
-				goto out_unreg;
-			/* Call handler. */
-			if (sch->driver && sch->driver->termination)
-				sch->driver->termination(&sch->dev);
-			goto out_unlock;
-		}
-	} else if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
-		   (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
-		   (sch->schib.pmcw.lpum == mask)) {
+	if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
+	    (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
+	    (sch->schib.pmcw.lpum == mask) &&
+	    (sch->vpm == 0)) {
 		int cc;
 
 		cc = cio_clear(sch);
@@ -653,13 +635,13 @@ __chp_add(struct subchannel_id schid, void *data)
 		if (sch->schib.pmcw.chpid[i] == chp->id) {
 			if (stsch(sch->schid, &sch->schib) != 0) {
 				/* Endgame. */
-				spin_unlock(&sch->lock);
+				spin_unlock_irq(&sch->lock);
 				return -ENXIO;
 			}
 			break;
 		}
 	if (i==8) {
-		spin_unlock(&sch->lock);
+		spin_unlock_irq(&sch->lock);
 		return 0;
 	}
 	sch->lpm = ((sch->schib.pmcw.pim &
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 74a257b2338..e210f89a244 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -45,11 +45,11 @@ struct pgid {
 	union {
 		__u8 fc;   	/* SPID function code */
 		struct path_state ps;	/* SNID path state */
-	} inf;
+	} __attribute__ ((packed)) inf;
 	union {
 		__u32 cpu_addr	: 16;	/* CPU address */
 		struct extended_cssid ext_cssid;
-	} pgid_high;
+	} __attribute__ ((packed)) pgid_high;
 	__u32 cpu_id	: 24;	/* CPU identification */
 	__u32 cpu_model : 16;	/* CPU model */
 	__u32 tod_high;		/* high word TOD clock */
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 180b3bf8b90..49ec562d7f6 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -749,7 +749,7 @@ ccw_device_irq(struct ccw_device *cdev, enum dev_event dev_event)
 			/* Unit check but no sense data. Need basic sense. */
 			if (ccw_device_do_sense(cdev, irb) != 0)
 				goto call_handler_unsol;
-			memcpy(irb, &cdev->private->irb, sizeof(struct irb));
+			memcpy(&cdev->private->irb, irb, sizeof(struct irb));
 			cdev->private->state = DEV_STATE_W4SENSE;
 			cdev->private->intparm = 0;
 			return;
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index 814f9258ce0..96f519281d9 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -38,6 +38,7 @@
 #include <linux/kernel.h>
 #include <linux/proc_fs.h>
 #include <linux/timer.h>
+#include <linux/mempool.h>
 
 #include <asm/ccwdev.h>
 #include <asm/io.h>
@@ -80,6 +81,8 @@ static int indicator_used[INDICATORS_PER_CACHELINE];
 static __u32 * volatile indicators;
 static __u32 volatile spare_indicator;
 static atomic_t spare_indicator_usecount;
+#define QDIO_MEMPOOL_SCSSC_ELEMENTS 2
+static mempool_t *qdio_mempool_scssc;
 
 static debug_info_t *qdio_dbf_setup;
 static debug_info_t *qdio_dbf_sbal;
@@ -1637,7 +1640,7 @@ next:
 
 	}
 	kfree(irq_ptr->qdr);
-	kfree(irq_ptr);
+	free_page((unsigned long) irq_ptr);
 }
 
 static void
@@ -2304,7 +2307,7 @@ qdio_get_ssqd_information(struct qdio_irq *irq_ptr)
 
 	QDIO_DBF_TEXT0(0,setup,"getssqd");
 	qdioac = 0;
-	ssqd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	ssqd_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!ssqd_area) {
 	        QDIO_PRINT_WARN("Could not get memory for chsc. Using all " \
 				"SIGAs for sch x%x.\n", irq_ptr->schid.sch_no);
@@ -2364,7 +2367,7 @@ qdio_get_ssqd_information(struct qdio_irq *irq_ptr)
 out:
 	qdio_check_subchannel_qebsm(irq_ptr, qdioac,
 				    ssqd_area->sch_token);
-	free_page ((unsigned long) ssqd_area);
+	mempool_free(ssqd_area, qdio_mempool_scssc);
 	irq_ptr->qdioac = qdioac;
 }
 
@@ -2458,7 +2461,7 @@ tiqdio_set_subchannel_ind(struct qdio_irq *irq_ptr, int reset_to_zero)
 			virt_to_phys((volatile void *)irq_ptr->dev_st_chg_ind);
 	}
 
-	scssc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	scssc_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!scssc_area) {
 		QDIO_PRINT_WARN("No memory for setting indicators on " \
 				"subchannel 0.%x.%x.\n",
@@ -2514,7 +2517,7 @@ tiqdio_set_subchannel_ind(struct qdio_irq *irq_ptr, int reset_to_zero)
 	QDIO_DBF_HEX2(0,setup,&real_addr_dev_st_chg_ind,sizeof(unsigned long));
 	result = 0;
 out:
-	free_page ((unsigned long) scssc_area);
+	mempool_free(scssc_area, qdio_mempool_scssc);
 	return result;
 
 }
@@ -2543,7 +2546,7 @@ tiqdio_set_delay_target(struct qdio_irq *irq_ptr, unsigned long delay_target)
 	if (!irq_ptr->is_thinint_irq)
 		return -ENODEV;
 
-	scsscf_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	scsscf_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!scsscf_area) {
 		QDIO_PRINT_WARN("No memory for setting delay target on " \
 				"subchannel 0.%x.%x.\n",
@@ -2581,7 +2584,7 @@ tiqdio_set_delay_target(struct qdio_irq *irq_ptr, unsigned long delay_target)
 	QDIO_DBF_HEX2(0,trace,&delay_target,sizeof(unsigned long));
 	result = 0; /* not critical */
 out:
-	free_page ((unsigned long) scsscf_area);
+	mempool_free(scsscf_area, qdio_mempool_scssc);
 	return result;
 }
 
@@ -2980,7 +2983,7 @@ qdio_allocate(struct qdio_initialize *init_data)
 	qdio_allocate_do_dbf(init_data);
 
 	/* create irq */
-	irq_ptr = kzalloc(sizeof(struct qdio_irq), GFP_KERNEL | GFP_DMA);
+	irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 
 	QDIO_DBF_TEXT0(0,setup,"irq_ptr:");
 	QDIO_DBF_HEX0(0,setup,&irq_ptr,sizeof(void*));
@@ -2995,7 +2998,7 @@ qdio_allocate(struct qdio_initialize *init_data)
 	/* QDR must be in DMA area since CCW data address is only 32 bit */
 	irq_ptr->qdr=kmalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
   	if (!(irq_ptr->qdr)) {
-   		kfree(irq_ptr);
+   		free_page((unsigned long) irq_ptr);
     		QDIO_PRINT_ERR("kmalloc of irq_ptr->qdr failed!\n");
 		return -ENOMEM;
        	}
@@ -3780,6 +3783,16 @@ oom:
 	return -ENOMEM;
 }
 
+static void *qdio_mempool_alloc(gfp_t gfp_mask, void *size)
+{
+	return (void *) get_zeroed_page(gfp_mask|GFP_DMA);
+}
+
+static void qdio_mempool_free(void *element, void *size)
+{
+	free_page((unsigned long) element);
+}
+
 static int __init
 init_QDIO(void)
 {
@@ -3809,6 +3822,10 @@ init_QDIO(void)
 
 	qdio_add_procfs_entry();
 
+	qdio_mempool_scssc = mempool_create(QDIO_MEMPOOL_SCSSC_ELEMENTS,
+					    qdio_mempool_alloc,
+					    qdio_mempool_free, NULL);
+
 	if (tiqdio_check_chsc_availability())
 		QDIO_PRINT_ERR("Not all CHSCs supported. Continuing.\n");
 
@@ -3824,6 +3841,7 @@ cleanup_QDIO(void)
 	qdio_remove_procfs_entry();
 	qdio_release_qdio_memory();
 	qdio_unregister_dbf_views();
+	mempool_destroy(qdio_mempool_scssc);
 
   	printk("qdio: %s: module removed\n",version);
 }
diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c
index af9f212314b..fe986af884f 100644
--- a/drivers/s390/net/ctcmain.c
+++ b/drivers/s390/net/ctcmain.c
@@ -1486,13 +1486,13 @@ ch_action_iofatal(fsm_instance * fi, int event, void *arg)
 	}
 }
 
-static void 
+static void
 ch_action_reinit(fsm_instance *fi, int event, void *arg)
 {
  	struct channel *ch = (struct channel *)arg;
  	struct net_device *dev = ch->netdev;
  	struct ctc_priv *privptr = dev->priv;
- 
+
 	DBF_TEXT(trace, 4, __FUNCTION__);
  	ch_action_iofatal(fi, event, arg);
  	fsm_addtimer(&privptr->restart_timer, 1000, DEV_EVENT_RESTART, dev);
@@ -1624,7 +1624,7 @@ less_than(char *id1, char *id2)
 	}
 	dev1 = simple_strtoul(id1, &id1, 16);
 	dev2 = simple_strtoul(id2, &id2, 16);
-	
+
 	return (dev1 < dev2);
 }
 
@@ -1895,7 +1895,7 @@ ctc_irq_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 			    irb->scsw.dstat);
 		return;
 	}
-	
+
 	priv = ((struct ccwgroup_device *)cdev->dev.driver_data)
 		->dev.driver_data;
 
@@ -1909,7 +1909,7 @@ ctc_irq_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 			   "device %s\n", cdev->dev.bus_id);
 		return;
 	}
-	
+
 	dev = (struct net_device *) (ch->netdev);
 	if (dev == NULL) {
 		ctc_pr_crit("ctc: ctc_irq_handler dev=NULL bus_id=%s, ch=0x%p\n",
@@ -2008,12 +2008,12 @@ dev_action_stop(fsm_instance * fi, int event, void *arg)
 		fsm_event(ch->fsm, CH_EVENT_STOP, ch);
 	}
 }
-static void 
+static void
 dev_action_restart(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = (struct net_device *)arg;
 	struct ctc_priv *privptr = dev->priv;
-	
+
 	DBF_TEXT(trace, 3, __FUNCTION__);
 	ctc_pr_debug("%s: Restarting\n", dev->name);
 	dev_action_stop(fi, event, arg);
@@ -2193,7 +2193,7 @@ transmit_skb(struct channel *ch, struct sk_buff *skb)
 
 	DBF_TEXT(trace, 5, __FUNCTION__);
 	/* we need to acquire the lock for testing the state
-	 * otherwise we can have an IRQ changing the state to 
+	 * otherwise we can have an IRQ changing the state to
 	 * TXIDLE after the test but before acquiring the lock.
 	 */
 	spin_lock_irqsave(&ch->collect_lock, saveflags);
@@ -2393,7 +2393,7 @@ ctc_tx(struct sk_buff *skb, struct net_device * dev)
 
 	/**
 	 * If channels are not running, try to restart them
-	 * and throw away packet. 
+	 * and throw away packet.
 	 */
 	if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) {
 		fsm_event(privptr->fsm, DEV_EVENT_START, dev);
@@ -2738,7 +2738,7 @@ ctc_remove_files(struct device *dev)
 /**
  * Add ctc specific attributes.
  * Add ctc private data.
- * 
+ *
  * @param cgdev pointer to ccwgroup_device just added
  *
  * @returns 0 on success, !0 on failure.
@@ -2869,7 +2869,7 @@ ctc_new_device(struct ccwgroup_device *cgdev)
 	DBF_TEXT(setup, 3, buffer);
 
 	type = get_channel_type(&cgdev->cdev[0]->id);
-	
+
 	snprintf(read_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id);
 	snprintf(write_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[1]->dev.bus_id);
 
@@ -2907,7 +2907,7 @@ ctc_new_device(struct ccwgroup_device *cgdev)
 		    channel_get(type, direction == READ ? read_id : write_id,
 				direction);
 		if (privptr->channel[direction] == NULL) {
-			if (direction == WRITE) 
+			if (direction == WRITE)
 				channel_free(privptr->channel[READ]);
 
 			ctc_free_netdevice(dev, 1);
@@ -2955,7 +2955,7 @@ ctc_shutdown_device(struct ccwgroup_device *cgdev)
 {
 	struct ctc_priv *priv;
 	struct net_device *ndev;
-		
+
 	DBF_TEXT(setup, 3, __FUNCTION__);
 	pr_debug("%s() called\n", __FUNCTION__);
 
diff --git a/drivers/s390/net/ctctty.c b/drivers/s390/net/ctctty.c
index 5cdcdbf9296..af54d1de07b 100644
--- a/drivers/s390/net/ctctty.c
+++ b/drivers/s390/net/ctctty.c
@@ -130,7 +130,7 @@ ctc_tty_readmodem(ctc_tty_info *info)
 	if ((tty = info->tty)) {
 		if (info->mcr & UART_MCR_RTS) {
 			struct sk_buff *skb;
-			
+
 			if ((skb = skb_dequeue(&info->rx_queue))) {
 				int len = skb->len;
 				tty_insert_flip_string(tty, skb->data, len);
@@ -328,7 +328,7 @@ ctc_tty_inject(ctc_tty_info *info, char c)
 {
 	int skb_res;
 	struct sk_buff *skb;
-	
+
 	DBF_TEXT(trace, 4, __FUNCTION__);
 	if (ctc_tty_shuttingdown)
 		return;
@@ -497,7 +497,7 @@ ctc_tty_write(struct tty_struct *tty, const u_char * buf, int count)
 		c = (count < CTC_TTY_XMIT_SIZE) ? count : CTC_TTY_XMIT_SIZE;
 		if (c <= 0)
 			break;
-		
+
 		skb_res = info->netdev->hard_header_len + sizeof(info->mcr) +
 			+ sizeof(__u32);
 		skb = dev_alloc_skb(skb_res + c);
@@ -828,7 +828,7 @@ ctc_tty_block_til_ready(struct tty_struct *tty, struct file *filp, ctc_tty_info
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & CTC_ASYNC_CLOSING)) {
 		if (info->flags & CTC_ASYNC_CLOSING)
-			wait_event(info->close_wait, 
+			wait_event(info->close_wait,
 				   !(info->flags & CTC_ASYNC_CLOSING));
 #ifdef MODEM_DO_RESTART
 		if (info->flags & CTC_ASYNC_HUP_NOTIFY)
@@ -1247,7 +1247,7 @@ ctc_tty_unregister_netdev(struct net_device *dev) {
 void
 ctc_tty_cleanup(void) {
 	unsigned long saveflags;
-	
+
 	DBF_TEXT(trace, 2, __FUNCTION__);
 	spin_lock_irqsave(&ctc_tty_lock, saveflags);
 	ctc_tty_shuttingdown = 1;
diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c
index b12533104c1..e965f03a729 100644
--- a/drivers/s390/net/cu3088.c
+++ b/drivers/s390/net/cu3088.c
@@ -20,7 +20,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/err.h>
@@ -77,7 +77,7 @@ group_write(struct device_driver *drv, const char *buf, size_t count)
 		int len;
 
 		if (!(end = strchr(start, delim[i])))
-			return count;
+			return -EINVAL;
 		len = min_t(ptrdiff_t, BUS_ID_SIZE, end - start + 1);
 		strlcpy (bus_ids[i], start, len);
 		argv[i] = bus_ids[i];
@@ -94,7 +94,7 @@ static DRIVER_ATTR(group, 0200, NULL, group_write);
 
 /* Register-unregister for ctc&lcs */
 int
-register_cu3088_discipline(struct ccwgroup_driver *dcp) 
+register_cu3088_discipline(struct ccwgroup_driver *dcp)
 {
 	int rc;
 
@@ -109,7 +109,7 @@ register_cu3088_discipline(struct ccwgroup_driver *dcp)
 	rc = driver_create_file(&dcp->driver, &driver_attr_group);
 	if (rc)
 		ccwgroup_driver_unregister(dcp);
-		
+
 	return rc;
 
 }
@@ -137,7 +137,7 @@ static int __init
 cu3088_init (void)
 {
 	int rc;
-	
+
 	cu3088_root_dev = s390_root_dev_register("cu3088");
 	if (IS_ERR(cu3088_root_dev))
 		return PTR_ERR(cu3088_root_dev);
diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c
index 6190be9dca9..e0c7deb9883 100644
--- a/drivers/s390/net/iucv.c
+++ b/drivers/s390/net/iucv.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * IUCV network driver
  *
  * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
@@ -28,7 +28,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
+
 /* #define DEBUG */
 
 #include <linux/module.h>
@@ -81,7 +81,7 @@ iucv_bus_match (struct device *dev, struct device_driver *drv)
 struct bus_type iucv_bus = {
 	.name = "iucv",
 	.match = iucv_bus_match,
-};	
+};
 
 struct device *iucv_root;
 
@@ -297,7 +297,7 @@ MODULE_LICENSE("GPL");
 /*
  * Debugging stuff
  *******************************************************************************/
-
+
 
 #ifdef DEBUG
 static int debuglevel = 0;
@@ -344,7 +344,7 @@ do { \
 /*
  * Internal functions
  *******************************************************************************/
-
+
 /**
  * print start banner
  */
@@ -810,7 +810,7 @@ iucv_register_program (__u8 pgmname[16],
 			sizeof (new_handler->id.userid));
 		EBC_TOUPPER (new_handler->id.userid,
 			     sizeof (new_handler->id.userid));
-		
+
 		if (pgmmask) {
 			memcpy (new_handler->id.mask, pgmmask,
 				sizeof (new_handler->id.mask));
@@ -1229,7 +1229,7 @@ iucv_purge (__u16 pathid, __u32 msgid, __u32 srccls, __u32 *audit)
 		/* parm->ipaudit has only 3 bytes */
 		*audit >>= 8;
 	}
-	
+
 	release_param(parm);
 
 	iucv_debug(1, "b2f0_result = %ld", b2f0_result);
@@ -2330,14 +2330,14 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 					temp_buff1[j] &= (h->id.mask)[j];
 					temp_buff2[j] &= (h->id.mask)[j];
 				}
-				
+
 				iucv_dumpit("temp_buff1:",
 					    temp_buff1, sizeof(temp_buff1));
 				iucv_dumpit("temp_buff2",
 					    temp_buff2, sizeof(temp_buff2));
-				
+
 				if (!memcmp (temp_buff1, temp_buff2, 24)) {
-					
+
 					iucv_debug(2,
 						   "found a matching handler");
 					break;
@@ -2368,7 +2368,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 			} else
 				iucv_sever(int_buf->ippathid, no_listener);
 			break;
-			
+
 		case 0x02:		/*connection complete */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2387,7 +2387,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 			} else
 				iucv_sever(int_buf->ippathid, no_listener);
 			break;
-			
+
 		case 0x03:		/* connection severed */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2398,13 +2398,13 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 					interrupt->ConnectionSevered(
 						(iucv_ConnectionSevered *)int_buf,
 						h->pgm_data);
-				
+
 				else
 					iucv_sever (int_buf->ippathid, no_listener);
 			} else
 				iucv_sever(int_buf->ippathid, no_listener);
 			break;
-			
+
 		case 0x04:		/* connection quiesced */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2420,7 +2420,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 						   "ConnectionQuiesced not called");
 			}
 			break;
-			
+
 		case 0x05:		/* connection resumed */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2436,7 +2436,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 						   "ConnectionResumed not called");
 			}
 			break;
-			
+
 		case 0x06:		/* priority message complete */
 		case 0x07:		/* nonpriority message complete */
 			if (h) {
@@ -2449,7 +2449,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 						   "MessageComplete not called");
 			}
 			break;
-			
+
 		case 0x08:		/* priority message pending  */
 		case 0x09:		/* nonpriority message pending  */
 			if (h) {
@@ -2467,7 +2467,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 			       __FUNCTION__);
 			break;
 	}			/* end switch */
-	
+
 	iucv_debug(2, "exiting pathid %d, type %02X",
 		 int_buf->ippathid, int_buf->iptype);
 
diff --git a/drivers/s390/net/iucv.h b/drivers/s390/net/iucv.h
index 0c4644d3d2f..5b6b1b7241c 100644
--- a/drivers/s390/net/iucv.h
+++ b/drivers/s390/net/iucv.h
@@ -4,7 +4,7 @@
  *
  *  S390 version
  *    Copyright (C) 2000 IBM Corporation
- *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com) 
+ *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
  *		Xenia Tkatschow (xenia@us.ibm.com)
  *
  *
@@ -16,17 +16,17 @@
  * CP Programming Services book, also available on the web
  * thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
  *
- *      Definition of Return Codes                                    
- *      -All positive return codes including zero are reflected back  
- *       from CP except for iucv_register_program. The definition of each 
- *       return code can be found in CP Programming Services book.    
- *       Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760          
- *      - Return Code of:         
- *             (-EINVAL) Invalid value       
- *             (-ENOMEM) storage allocation failed              
+ *      Definition of Return Codes
+ *      -All positive return codes including zero are reflected back
+ *       from CP except for iucv_register_program. The definition of each
+ *       return code can be found in CP Programming Services book.
+ *       Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
+ *      - Return Code of:
+ *             (-EINVAL) Invalid value
+ *             (-ENOMEM) storage allocation failed
  *	pgmask defined in iucv_register_program will be set depending on input
- *	paramters. 
- *	
+ *	paramters.
+ *
  */
 
 #include <linux/types.h>
@@ -124,13 +124,13 @@ iucv_hex_dump(unsigned char *buf, size_t len)
 #define iucv_handle_t void *
 
 /* flags1:
- * All flags are defined in the field IPFLAGS1 of each function   
- * and can be found in CP Programming Services.                  
- * IPLOCAL  - Indicates the connect can only be satisfied on the 
- *            local system                                       
- * IPPRTY   - Indicates a priority message                       
- * IPQUSCE  - Indicates you do not want to receive messages on a 
- *            path until an iucv_resume is issued                
+ * All flags are defined in the field IPFLAGS1 of each function
+ * and can be found in CP Programming Services.
+ * IPLOCAL  - Indicates the connect can only be satisfied on the
+ *            local system
+ * IPPRTY   - Indicates a priority message
+ * IPQUSCE  - Indicates you do not want to receive messages on a
+ *            path until an iucv_resume is issued
  * IPRMDATA - Indicates that the message is in the parameter list
  */
 #define IPLOCAL   	0x01
@@ -154,14 +154,14 @@ iucv_hex_dump(unsigned char *buf, size_t len)
 #define AllInterrupts                                    0xf8
 /*
  * Mapping of external interrupt buffers should be used with the corresponding
- * interrupt types.                  
- * Names: iucv_ConnectionPending    ->  connection pending 
+ * interrupt types.
+ * Names: iucv_ConnectionPending    ->  connection pending
  *        iucv_ConnectionComplete   ->  connection complete
- *        iucv_ConnectionSevered    ->  connection severed 
- *        iucv_ConnectionQuiesced   ->  connection quiesced 
- *        iucv_ConnectionResumed    ->  connection resumed 
- *        iucv_MessagePending       ->  message pending    
- *        iucv_MessageComplete      ->  message complete   
+ *        iucv_ConnectionSevered    ->  connection severed
+ *        iucv_ConnectionQuiesced   ->  connection quiesced
+ *        iucv_ConnectionResumed    ->  connection resumed
+ *        iucv_MessagePending       ->  message pending
+ *        iucv_MessageComplete      ->  message complete
  */
 typedef struct {
 	u16 ippathid;
@@ -260,16 +260,16 @@ typedef struct {
 	uchar res2[3];
 } iucv_MessageComplete;
 
-/* 
- * iucv_interrupt_ops_t: Is a vector of functions that handle 
- * IUCV interrupts.                                          
- * Parameter list:                                           
- *         eib - is a pointer to a 40-byte area described    
- *               with one of the structures above.           
- *         pgm_data - this data is strictly for the          
- *                    interrupt handler that is passed by    
- *                    the application. This may be an address 
- *                    or token.                              
+/*
+ * iucv_interrupt_ops_t: Is a vector of functions that handle
+ * IUCV interrupts.
+ * Parameter list:
+ *         eib - is a pointer to a 40-byte area described
+ *               with one of the structures above.
+ *         pgm_data - this data is strictly for the
+ *                    interrupt handler that is passed by
+ *                    the application. This may be an address
+ *                    or token.
 */
 typedef struct {
 	void (*ConnectionPending) (iucv_ConnectionPending * eib,
@@ -287,8 +287,8 @@ typedef struct {
 } iucv_interrupt_ops_t;
 
 /*
- *iucv_array_t : Defines buffer array.                      
- * Inside the array may be 31- bit addresses and 31-bit lengths. 
+ *iucv_array_t : Defines buffer array.
+ * Inside the array may be 31- bit addresses and 31-bit lengths.
 */
 typedef struct {
 	u32 address;
@@ -299,19 +299,19 @@ extern struct bus_type iucv_bus;
 extern struct device *iucv_root;
 
 /*   -prototypes-    */
-/*                                                                
- * Name: iucv_register_program                                    
- * Purpose: Registers an application with IUCV                    
- * Input: prmname - user identification                           
+/*
+ * Name: iucv_register_program
+ * Purpose: Registers an application with IUCV
+ * Input: prmname - user identification
  *        userid  - machine identification
  *        pgmmask - indicates which bits in the prmname and userid combined will be
  *  		    used to determine who is given control
- *        ops     - address of vector of interrupt handlers       
- *        pgm_data- application data passed to interrupt handlers 
- * Output: NA                                                     
- * Return: address of handler                                     
+ *        ops     - address of vector of interrupt handlers
+ *        pgm_data- application data passed to interrupt handlers
+ * Output: NA
+ * Return: address of handler
  *         (0) - Error occurred, registration not completed.
- * NOTE: Exact cause of failure will be recorded in syslog.                        
+ * NOTE: Exact cause of failure will be recorded in syslog.
 */
 iucv_handle_t iucv_register_program (uchar pgmname[16],
 				     uchar userid[8],
@@ -319,13 +319,13 @@ iucv_handle_t iucv_register_program (uchar pgmname[16],
 				     iucv_interrupt_ops_t * ops,
 				     void *pgm_data);
 
-/*                                                
- * Name: iucv_unregister_program                  
- * Purpose: Unregister application with IUCV      
- * Input: address of handler                      
- * Output: NA                                     
- * Return: (0) - Normal return                    
- *         (-EINVAL) - Internal error, wild pointer     
+/*
+ * Name: iucv_unregister_program
+ * Purpose: Unregister application with IUCV
+ * Input: address of handler
+ * Output: NA
+ * Return: (0) - Normal return
+ *         (-EINVAL) - Internal error, wild pointer
 */
 int iucv_unregister_program (iucv_handle_t handle);
 
@@ -333,7 +333,7 @@ int iucv_unregister_program (iucv_handle_t handle);
  * Name: iucv_accept
  * Purpose: This function is issued after the user receives a Connection Pending external
  *          interrupt and now wishes to complete the IUCV communication path.
- * Input:  pathid - u16 , Path identification number   
+ * Input:  pathid - u16 , Path identification number
  *         msglim_reqstd - u16, The number of outstanding messages requested.
  *         user_data - uchar[16], Data specified by the iucv_connect function.
  *	   flags1 - int, Contains options for this path.
@@ -358,34 +358,34 @@ int iucv_accept (u16 pathid,
 		 void *pgm_data, int *flags1_out, u16 * msglim);
 
 /*
- * Name: iucv_connect                                         
+ * Name: iucv_connect
  * Purpose: This function establishes an IUCV path. Although the connect may complete
- *	    successfully, you are not able to use the path until you receive an IUCV 
- *          Connection Complete external interrupt.            
- * Input: pathid - u16 *, Path identification number          
- *        msglim_reqstd - u16, Number of outstanding messages requested       
- *        user_data - uchar[16], 16-byte user data                    
+ *	    successfully, you are not able to use the path until you receive an IUCV
+ *          Connection Complete external interrupt.
+ * Input: pathid - u16 *, Path identification number
+ *        msglim_reqstd - u16, Number of outstanding messages requested
+ *        user_data - uchar[16], 16-byte user data
  *	  userid - uchar[8], User identification
- *        system_name - uchar[8], 8-byte identifying the system name 
+ *        system_name - uchar[8], 8-byte identifying the system name
  *	  flags1 - int, Contains options for this path.
  *          -IPPRTY -   0x20, Specifies if you want to send priority message.
  *          -IPRMDATA - 0x80, Specifies whether your program can handle a message
  *            	 in  the parameter list.
- *          -IPQUSCE -  0x40, Specifies whether you want to quiesce the path being	 
+ *          -IPQUSCE -  0x40, Specifies whether you want to quiesce the path being
  *		established.
- *          -IPLOCAL -  0X01, Allows an application to force the partner to be on 
+ *          -IPLOCAL -  0X01, Allows an application to force the partner to be on
  *		the local system. If local is specified then target class cannot be
- *		specified.                       
+ *		specified.
  *        flags1_out - int * Contains information about the path
  *           - IPPRTY - 0x20, Indicates you may send priority messages.
  *        msglim - * u16, Number of outstanding messages
- *        handle - iucv_handle_t, Address of handler                         
- *        pgm_data - void *, Application data passed to interrupt handlers              
+ *        handle - iucv_handle_t, Address of handler
+ *        pgm_data - void *, Application data passed to interrupt handlers
  * Output: return code from CP IUCV call
  *         rc - return code from iucv_declare_buffer
- *         -EINVAL - Invalid handle passed by application 
- *         -EINVAL - Pathid address is NULL 
- *         add_pathid_result - Return code from internal function add_pathid         
+ *         -EINVAL - Invalid handle passed by application
+ *         -EINVAL - Pathid address is NULL
+ *         add_pathid_result - Return code from internal function add_pathid
 */
 int
     iucv_connect (u16 * pathid,
@@ -397,16 +397,16 @@ int
 		  int *flags1_out,
 		  u16 * msglim, iucv_handle_t handle, void *pgm_data);
 
-/*                                                                     
- * Name: iucv_purge                                                    
- * Purpose: This function cancels a message that you have sent.        
- * Input: pathid - Path identification number.                          
+/*
+ * Name: iucv_purge
+ * Purpose: This function cancels a message that you have sent.
+ * Input: pathid - Path identification number.
  *        msgid - Specifies the message ID of the message to be purged.
- *        srccls - Specifies the source message class.                  
- * Output: audit - Contains information about asynchronous error       
- *                 that may have affected the normal completion        
- *                 of this message.                                    
- * Return: Return code from CP IUCV call.                           
+ *        srccls - Specifies the source message class.
+ * Output: audit - Contains information about asynchronous error
+ *                 that may have affected the normal completion
+ *                 of this message.
+ * Return: Return code from CP IUCV call.
 */
 int iucv_purge (u16 pathid, u32 msgid, u32 srccls, __u32 *audit);
 /*
@@ -426,38 +426,38 @@ ulong iucv_query_maxconn (void);
  */
 ulong iucv_query_bufsize (void);
 
-/*                                                                     
- * Name: iucv_quiesce                                                  
- * Purpose: This function temporarily suspends incoming messages on an 
- *          IUCV path. You can later reactivate the path by invoking   
- *          the iucv_resume function.                                  
- * Input: pathid - Path identification number                          
- *        user_data  - 16-bytes of user data                           
- * Output: NA                                                          
- * Return: Return code from CP IUCV call.                           
+/*
+ * Name: iucv_quiesce
+ * Purpose: This function temporarily suspends incoming messages on an
+ *          IUCV path. You can later reactivate the path by invoking
+ *          the iucv_resume function.
+ * Input: pathid - Path identification number
+ *        user_data  - 16-bytes of user data
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_quiesce (u16 pathid, uchar user_data[16]);
 
-/*                                                                     
- * Name: iucv_receive                                                  
- * Purpose: This function receives messages that are being sent to you 
+/*
+ * Name: iucv_receive
+ * Purpose: This function receives messages that are being sent to you
  *          over established paths. Data will be returned in buffer for length of
  *          buflen.
- * Input: 
- *       pathid - Path identification number.                          
- *       buffer - Address of buffer to receive.                        
- *       buflen - Length of buffer to receive.                         
- *       msgid - Specifies the message ID.          
- *       trgcls - Specifies target class.                       
- * Output: 
+ * Input:
+ *       pathid - Path identification number.
+ *       buffer - Address of buffer to receive.
+ *       buflen - Length of buffer to receive.
+ *       msgid - Specifies the message ID.
+ *       trgcls - Specifies target class.
+ * Output:
  *	 flags1_out: int *, Contains information about this path.
  *         IPNORPY - 0x10 Specifies this is a one-way message and no reply is
- *	   expected.      
- *         IPPRTY  - 0x20 Specifies if you want to send priority message.       
+ *	   expected.
+ *         IPPRTY  - 0x20 Specifies if you want to send priority message.
  *         IPRMDATA - 0x80 specifies the data is contained in the parameter list
  *       residual_buffer - address of buffer updated by the number
  *                         of bytes you have received.
- *       residual_length -      
+ *       residual_length -
  *              Contains one of the following values, if the receive buffer is:
  *               The same length as the message, this field is zero.
  *               Longer than the message, this field contains the number of
@@ -466,8 +466,8 @@ int iucv_quiesce (u16 pathid, uchar user_data[16]);
  *                count (that is, the number of bytes remaining in the
  *                message that does not fit into the buffer. In this
  *                case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - buffer address is pointing to NULL                   
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - buffer address is pointing to NULL
 */
 int iucv_receive (u16 pathid,
 		  u32 msgid,
@@ -477,16 +477,16 @@ int iucv_receive (u16 pathid,
 		  int *flags1_out,
 		  ulong * residual_buffer, ulong * residual_length);
 
- /*                                                                     
-  * Name: iucv_receive_array                                            
-  * Purpose: This function receives messages that are being sent to you 
+ /*
+  * Name: iucv_receive_array
+  * Purpose: This function receives messages that are being sent to you
   *          over established paths. Data will be returned in first buffer for
   *          length of first buffer.
-  * Input: pathid - Path identification number.                          
+  * Input: pathid - Path identification number.
   *        msgid - specifies the message ID.
   *        trgcls - Specifies target class.
-  *        buffer - Address of array of buffers.                         
-  *        buflen - Total length of buffers.                             
+  *        buffer - Address of array of buffers.
+  *        buflen - Total length of buffers.
   * Output:
   *        flags1_out: int *, Contains information about this path.
   *          IPNORPY - 0x10 Specifies this is a one-way message and no reply is
@@ -504,8 +504,8 @@ int iucv_receive (u16 pathid,
   *                count (that is, the number of bytes remaining in the
   *                message that does not fit into the buffer. In this
   *                case b2f0_result = 5.
-  * Return: Return code from CP IUCV call.                           
-  *         (-EINVAL) - Buffer address is NULL.       
+  * Return: Return code from CP IUCV call.
+  *         (-EINVAL) - Buffer address is NULL.
   */
 int iucv_receive_array (u16 pathid,
 			u32 msgid,
@@ -515,44 +515,44 @@ int iucv_receive_array (u16 pathid,
 			int *flags1_out,
 			ulong * residual_buffer, ulong * residual_length);
 
-/*                                                                       
- * Name: iucv_reject                                                     
- * Purpose: The reject function refuses a specified message. Between the 
- *          time you are notified of a message and the time that you     
- *          complete the message, the message may be rejected.           
- * Input: pathid - Path identification number.                            
- *        msgid - Specifies the message ID.                   
- *        trgcls - Specifies target class.                                
- * Output: NA                                                            
- * Return: Return code from CP IUCV call.                             
+/*
+ * Name: iucv_reject
+ * Purpose: The reject function refuses a specified message. Between the
+ *          time you are notified of a message and the time that you
+ *          complete the message, the message may be rejected.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_reject (u16 pathid, u32 msgid, u32 trgcls);
 
-/*                                                                     
- * Name: iucv_reply                                                    
- * Purpose: This function responds to the two-way messages that you    
- *          receive. You must identify completely the message to       
- *          which you wish to reply. ie, pathid, msgid, and trgcls.    
- * Input: pathid - Path identification number.                          
- *        msgid - Specifies the message ID.                
- *        trgcls - Specifies target class.                              
+/*
+ * Name: iucv_reply
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
- *          IPPRTY- 0x20, Specifies if you want to send priority message.        
- *        buffer - Address of reply buffer.                             
- *        buflen - Length of reply buffer.                              
- * Output: residual_buffer - Address of buffer updated by the number 
- *                    of bytes you have moved.              
+ *          IPPRTY- 0x20, Specifies if you want to send priority message.
+ *        buffer - Address of reply buffer.
+ *        buflen - Length of reply buffer.
+ * Output: residual_buffer - Address of buffer updated by the number
+ *                    of bytes you have moved.
  *         residual_length - Contains one of the following values:
  *		If the answer buffer is the same length as the reply, this field
  *		 contains zero.
  *		If the answer buffer is longer than the reply, this field contains
- *		 the number of bytes remaining in the buffer.  
+ *		 the number of bytes remaining in the buffer.
  *		If the answer buffer is shorter than the reply, this field contains
  *		 a residual count (that is, the number of bytes remianing in the
  *		 reply that does not fit into the buffer. In this
  *               case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - Buffer address is NULL.                               
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_reply (u16 pathid,
 		u32 msgid,
@@ -561,20 +561,20 @@ int iucv_reply (u16 pathid,
 		void *buffer, ulong buflen, ulong * residual_buffer,
 		ulong * residual_length);
 
-/*                                                                       
- * Name: iucv_reply_array                                                
- * Purpose: This function responds to the two-way messages that you      
- *          receive. You must identify completely the message to         
- *          which you wish to reply. ie, pathid, msgid, and trgcls.      
- *          The array identifies a list of addresses and lengths of      
- *          discontiguous buffers that contains the reply data.          
- * Input: pathid - Path identification number                            
- *        msgid - Specifies the message ID. 
- *        trgcls - Specifies target class.                                
+/*
+ * Name: iucv_reply_array
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ *          The array identifies a list of addresses and lengths of
+ *          discontiguous buffers that contains the reply data.
+ * Input: pathid - Path identification number
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20, Specifies if you want to send priority message.
- *        buffer - Address of array of reply buffers.                     
- *        buflen - Total length of reply buffers.                         
+ *        buffer - Address of array of reply buffers.
+ *        buflen - Total length of reply buffers.
  * Output: residual_buffer - Address of buffer which IUCV is currently working on.
  *         residual_length - Contains one of the following values:
  *              If the answer buffer is the same length as the reply, this field
@@ -585,8 +585,8 @@ int iucv_reply (u16 pathid,
  *               a residual count (that is, the number of bytes remianing in the
  *               reply that does not fit into the buffer. In this
  *               case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                             
- *         (-EINVAL) - Buffer address is NULL.              
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_reply_array (u16 pathid,
 		      u32 msgid,
@@ -596,77 +596,77 @@ int iucv_reply_array (u16 pathid,
 		      ulong buflen, ulong * residual_address,
 		      ulong * residual_length);
 
-/*                                                                  
- * Name: iucv_reply_prmmsg                                          
- * Purpose: This function responds to the two-way messages that you 
- *          receive. You must identify completely the message to    
- *          which you wish to reply. ie, pathid, msgid, and trgcls. 
- *          Prmmsg signifies the data is moved into the             
- *          parameter list.                                         
- * Input: pathid - Path identification number.                       
- *        msgid - Specifies the message ID.              
- *        trgcls - Specifies target class.                           
+/*
+ * Name: iucv_reply_prmmsg
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ *          Prmmsg signifies the data is moved into the
+ *          parameter list.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into the parameter.  
- *                 list.                                            
- * Output: NA                                                       
- * Return: Return code from CP IUCV call.                        
+ *        prmmsg - 8-bytes of data to be placed into the parameter.
+ *                 list.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_reply_prmmsg (u16 pathid,
 		       u32 msgid, u32 trgcls, int flags1, uchar prmmsg[8]);
 
-/*                                                                     
- * Name: iucv_resume                                                   
- * Purpose: This function restores communications over a quiesced path 
- * Input: pathid - Path identification number.                          
- *        user_data  - 16-bytes of user data.                           
- * Output: NA                                                          
- * Return: Return code from CP IUCV call.                           
+/*
+ * Name: iucv_resume
+ * Purpose: This function restores communications over a quiesced path
+ * Input: pathid - Path identification number.
+ *        user_data  - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_resume (u16 pathid, uchar user_data[16]);
 
-/*                                                                   
- * Name: iucv_send                                                   
- * Purpose: This function transmits data to another application.     
- *          Data to be transmitted is in a buffer and this is a      
- *          one-way message and the receiver will not reply to the   
- *          message.                                                 
- * Input: pathid - Path identification number.                        
- *        trgcls - Specifies target class.                            
- *        srccls - Specifies the source message class.                
- *        msgtag - Specifies a tag to be associated with the message. 
+/*
+ * Name: iucv_send
+ * Purpose: This function transmits data to another application.
+ *          Data to be transmitted is in a buffer and this is a
+ *          one-way message and the receiver will not reply to the
+ *          message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Address of send buffer.                            
- *        buflen - Length of send buffer.                             
- * Output: msgid - Specifies the message ID.                         
- * Return: Return code from CP IUCV call.                         
- *         (-EINVAL) - Buffer address is NULL.                             
+ *        buffer - Address of send buffer.
+ *        buflen - Length of send buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send (u16 pathid,
 	       u32 * msgid,
 	       u32 trgcls,
 	       u32 srccls, u32 msgtag, int flags1, void *buffer, ulong buflen);
 
-/*                                                                   
- * Name: iucv_send_array                                             
- * Purpose: This function transmits data to another application.     
- *          The contents of buffer is the address of the array of    
- *          addresses and lengths of discontiguous buffers that hold 
- *          the message text. This is a one-way message and the      
- *          receiver will not reply to the message.                  
- * Input: pathid - Path identification number.                        
- *        trgcls - Specifies target class.                            
- *        srccls - Specifies the source message class.                
+/*
+ * Name: iucv_send_array
+ * Purpose: This function transmits data to another application.
+ *          The contents of buffer is the address of the array of
+ *          addresses and lengths of discontiguous buffers that hold
+ *          the message text. This is a one-way message and the
+ *          receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
  *        msgtag - Specifies a tag to be associated witht the message.
  *        flags1 - Option for path.
- *          IPPRTY- specifies if you want to send priority message. 
- *        buffer - Address of array of send buffers.                  
- *        buflen - Total length of send buffers.                      
- * Output: msgid - Specifies the message ID.                         
- * Return: Return code from CP IUCV call.                         
- *         (-EINVAL) - Buffer address is NULL.                             
+ *          IPPRTY- specifies if you want to send priority message.
+ *        buffer - Address of array of send buffers.
+ *        buflen - Total length of send buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send_array (u16 pathid,
 		     u32 * msgid,
@@ -675,48 +675,48 @@ int iucv_send_array (u16 pathid,
 		     u32 msgtag,
 		     int flags1, iucv_array_t * buffer, ulong buflen);
 
-/*                                                                     
- * Name: iucv_send_prmmsg                                              
- * Purpose: This function transmits data to another application.       
- *          Prmmsg specifies that the 8-bytes of data are to be moved  
- *          into the parameter list. This is a one-way message and the 
- *          receiver will not reply to the message.                    
- * Input: pathid - Path identification number.                          
- *        trgcls - Specifies target class.                              
- *        srccls - Specifies the source message class.                  
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send_prmmsg
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a one-way message and the
+ *          receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into parameter list.    
- * Output: msgid - Specifies the message ID.                           
- * Return: Return code from CP IUCV call.                           
+ *        prmmsg - 8-bytes of data to be placed into parameter list.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
 */
 int iucv_send_prmmsg (u16 pathid,
 		      u32 * msgid,
 		      u32 trgcls,
 		      u32 srccls, u32 msgtag, int flags1, uchar prmmsg[8]);
 
-/*                                                                
- * Name: iucv_send2way                                            
- * Purpose: This function transmits data to another application.  
- *          Data to be transmitted is in a buffer. The receiver   
- *          of the send is expected to reply to the message and   
- *          a buffer is provided into which IUCV moves the reply  
- *          to this message.                                      
- * Input: pathid - Path identification number.                     
- *        trgcls - Specifies target class.                         
- *        srccls - Specifies the source message class.             
- *        msgtag - Specifies a tag associated with the message.    
+/*
+ * Name: iucv_send2way
+ * Purpose: This function transmits data to another application.
+ *          Data to be transmitted is in a buffer. The receiver
+ *          of the send is expected to reply to the message and
+ *          a buffer is provided into which IUCV moves the reply
+ *          to this message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Address of send buffer.                         
- *        buflen - Length of send buffer.                          
- *        ansbuf - Address of buffer into which IUCV moves the reply of 
- *                 this message.        
- *        anslen - Address of length of buffer.          
- * Output: msgid - Specifies the message ID.                      
- * Return: Return code from CP IUCV call.                      
- *         (-EINVAL) - Buffer or ansbuf address is NULL.    
+ *        buffer - Address of send buffer.
+ *        buflen - Length of send buffer.
+ *        ansbuf - Address of buffer into which IUCV moves the reply of
+ *                 this message.
+ *        anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer or ansbuf address is NULL.
 */
 int iucv_send2way (u16 pathid,
 		   u32 * msgid,
@@ -726,28 +726,28 @@ int iucv_send2way (u16 pathid,
 		   int flags1,
 		   void *buffer, ulong buflen, void *ansbuf, ulong anslen);
 
-/*                                                                    
- * Name: iucv_send2way_array                                          
- * Purpose: This function transmits data to another application.      
- *          The contents of buffer is the address of the array of     
- *          addresses and lengths of discontiguous buffers that hold  
- *          the message text. The receiver of the send is expected to 
- *          reply to the message and a buffer is provided into which  
- *          IUCV moves the reply to this message.                     
- * Input: pathid - Path identification number.                         
- *        trgcls - Specifies target class.                             
- *        srccls - Specifies the source message class.                 
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send2way_array
+ * Purpose: This function transmits data to another application.
+ *          The contents of buffer is the address of the array of
+ *          addresses and lengths of discontiguous buffers that hold
+ *          the message text. The receiver of the send is expected to
+ *          reply to the message and a buffer is provided into which
+ *          IUCV moves the reply to this message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Sddress of array of send buffers.                   
- *        buflen - Total length of send buffers.                       
- *        ansbuf - Address of array of buffer into which IUCV moves the reply            
- *                 of this message.                         
- *        anslen - Address of length reply buffers.              
- * Output: msgid - Specifies the message ID.                          
- * Return: Return code from CP IUCV call.                          
- *         (-EINVAL) - Buffer address is NULL.                              
+ *        buffer - Sddress of array of send buffers.
+ *        buflen - Total length of send buffers.
+ *        ansbuf - Address of array of buffer into which IUCV moves the reply
+ *                 of this message.
+ *        anslen - Address of length reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send2way_array (u16 pathid,
 			 u32 * msgid,
@@ -758,27 +758,27 @@ int iucv_send2way_array (u16 pathid,
 			 iucv_array_t * buffer,
 			 ulong buflen, iucv_array_t * ansbuf, ulong anslen);
 
-/*                                                                     
- * Name: iucv_send2way_prmmsg                                          
- * Purpose: This function transmits data to another application.       
- *          Prmmsg specifies that the 8-bytes of data are to be moved  
- *          into the parameter list. This is a two-way message and the 
- *          receiver of the message is expected to reply. A buffer     
- *          is provided into which IUCV moves the reply to this        
- *          message.                                                   
- * Input: pathid - Rath identification number.                          
- *        trgcls - Specifies target class.                              
- *        srccls - Specifies the source message class.                  
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send2way_prmmsg
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a two-way message and the
+ *          receiver of the message is expected to reply. A buffer
+ *          is provided into which IUCV moves the reply to this
+ *          message.
+ * Input: pathid - Rath identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed in parameter list.      
- *        ansbuf - Address of buffer into which IUCV moves the reply of    
+ *        prmmsg - 8-bytes of data to be placed in parameter list.
+ *        ansbuf - Address of buffer into which IUCV moves the reply of
  *                 this message.
- *        anslen - Address of length of buffer.               
- * Output: msgid - Specifies the message ID.                           
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - Buffer address is NULL.         
+ *        anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send2way_prmmsg (u16 pathid,
 			  u32 * msgid,
@@ -788,29 +788,29 @@ int iucv_send2way_prmmsg (u16 pathid,
 			  ulong flags1,
 			  uchar prmmsg[8], void *ansbuf, ulong anslen);
 
-/*                                                                      
- * Name: iucv_send2way_prmmsg_array                                     
- * Purpose: This function transmits data to another application.        
- *          Prmmsg specifies that the 8-bytes of data are to be moved   
- *          into the parameter list. This is a two-way message and the  
- *          receiver of the message is expected to reply. A buffer      
- *          is provided into which IUCV moves the reply to this         
- *          message. The contents of ansbuf is the address of the       
- *          array of addresses and lengths of discontiguous buffers     
- *          that contain the reply.                                     
- * Input: pathid - Path identification number.                           
- *        trgcls - Specifies target class.                               
- *        srccls - Specifies the source message class.                   
- *        msgtag - Specifies a tag to be associated with the message.    
+/*
+ * Name: iucv_send2way_prmmsg_array
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a two-way message and the
+ *          receiver of the message is expected to reply. A buffer
+ *          is provided into which IUCV moves the reply to this
+ *          message. The contents of ansbuf is the address of the
+ *          array of addresses and lengths of discontiguous buffers
+ *          that contain the reply.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into the parameter list. 
+ *        prmmsg - 8-bytes of data to be placed into the parameter list.
  *        ansbuf - Address of array of buffer into which IUCV moves the reply
- *                 of this message.  
- *        anslen - Address of length of reply buffers.                
- * Output: msgid - Specifies the message ID.      
- * Return: Return code from CP IUCV call.      
- *         (-EINVAL) - Ansbuf address is NULL.          
+ *                 of this message.
+ *        anslen - Address of length of reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Ansbuf address is NULL.
 */
 int iucv_send2way_prmmsg_array (u16 pathid,
 				u32 * msgid,
@@ -821,29 +821,29 @@ int iucv_send2way_prmmsg_array (u16 pathid,
 				uchar prmmsg[8],
 				iucv_array_t * ansbuf, ulong anslen);
 
-/*                                                                   
- * Name: iucv_setmask                                                
- * Purpose: This function enables or disables the following IUCV     
- *          external interruptions: Nonpriority and priority message 
- *          interrupts, nonpriority and priority reply interrupts.   
+/*
+ * Name: iucv_setmask
+ * Purpose: This function enables or disables the following IUCV
+ *          external interruptions: Nonpriority and priority message
+ *          interrupts, nonpriority and priority reply interrupts.
  * Input: SetMaskFlag - options for interrupts
- *           0x80 - Nonpriority_MessagePendingInterruptsFlag         
- *           0x40 - Priority_MessagePendingInterruptsFlag            
- *           0x20 - Nonpriority_MessageCompletionInterruptsFlag      
- *           0x10 - Priority_MessageCompletionInterruptsFlag         
+ *           0x80 - Nonpriority_MessagePendingInterruptsFlag
+ *           0x40 - Priority_MessagePendingInterruptsFlag
+ *           0x20 - Nonpriority_MessageCompletionInterruptsFlag
+ *           0x10 - Priority_MessageCompletionInterruptsFlag
  *           0x08 - IUCVControlInterruptsFlag
- * Output: NA                                                        
- * Return: Return code from CP IUCV call.                         
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_setmask (int SetMaskFlag);
 
-/*                                                  
- * Name: iucv_sever                                 
- * Purpose: This function terminates an IUCV path.  
- * Input: pathid - Path identification number.       
- *        user_data - 16-bytes of user data.         
- * Output: NA       
- * Return: Return code from CP IUCV call.                                
- *         (-EINVAL) - Interal error, wild pointer.       
+/*
+ * Name: iucv_sever
+ * Purpose: This function terminates an IUCV path.
+ * Input: pathid - Path identification number.
+ *        user_data - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Interal error, wild pointer.
 */
 int iucv_sever (u16 pathid, uchar user_data[16]);
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 5d6b7a57b02..f94419b334f 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -68,6 +68,7 @@ static void lcs_tasklet(unsigned long);
 static void lcs_start_kernel_thread(struct lcs_card *card);
 static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
 static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+static int lcs_recovery(void *ptr);
 
 /**
  * Debug Facility Stuff
@@ -429,12 +430,6 @@ lcs_setup_card(struct lcs_card *card)
 	card->tx_buffer = NULL;
 	card->tx_emitted = 0;
 
-	/* Initialize kernel thread task used for LGW commands. */
-	INIT_WORK(&card->kernel_thread_starter,
-		  (void *)lcs_start_kernel_thread,card);
-	card->thread_start_mask = 0;
-	card->thread_allowed_mask = 0;
-	card->thread_running_mask = 0;
 	init_waitqueue_head(&card->wait_q);
 	spin_lock_init(&card->lock);
 	spin_lock_init(&card->ipm_lock);
@@ -675,8 +670,9 @@ lcs_ready_buffer(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	int index, rc;
 
 	LCS_DBF_TEXT(5, trace, "rdybuff");
-	BUG_ON(buffer->state != BUF_STATE_LOCKED &&
-		buffer->state != BUF_STATE_PROCESSED);
+	if (buffer->state != BUF_STATE_LOCKED &&
+	    buffer->state != BUF_STATE_PROCESSED)
+		BUG();
 	spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
 	buffer->state = BUF_STATE_READY;
 	index = buffer - channel->iob;
@@ -700,7 +696,8 @@ __lcs_processed_buffer(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	int index, prev, next;
 
 	LCS_DBF_TEXT(5, trace, "prcsbuff");
-	BUG_ON(buffer->state != BUF_STATE_READY);
+	if (buffer->state != BUF_STATE_READY)
+		BUG();
 	buffer->state = BUF_STATE_PROCESSED;
 	index = buffer - channel->iob;
 	prev = (index - 1) & (LCS_NUM_BUFFS - 1);
@@ -732,8 +729,9 @@ lcs_release_buffer(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	unsigned long flags;
 
 	LCS_DBF_TEXT(5, trace, "relbuff");
-	BUG_ON(buffer->state != BUF_STATE_LOCKED &&
-		buffer->state != BUF_STATE_PROCESSED);
+	if (buffer->state != BUF_STATE_LOCKED &&
+	    buffer->state != BUF_STATE_PROCESSED)
+		BUG();
 	spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
 	buffer->state = BUF_STATE_EMPTY;
 	spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
@@ -1147,8 +1145,6 @@ list_modified:
 		list_add_tail(&ipm->list, &card->ipm_list);
 	}
 	spin_unlock_irqrestore(&card->ipm_lock, flags);
-	if (card->state == DEV_STATE_UP)
-		netif_wake_queue(card->dev);
 }
 
 /**
@@ -1231,17 +1227,17 @@ lcs_set_mc_addresses(struct lcs_card *card, struct in_device *in4_dev)
 		if (ipm != NULL)
 			continue;	/* Address already in list. */
 		ipm = (struct lcs_ipm_list *)
-			kmalloc(sizeof(struct lcs_ipm_list), GFP_ATOMIC);
+			kzalloc(sizeof(struct lcs_ipm_list), GFP_ATOMIC);
 		if (ipm == NULL) {
 			PRINT_INFO("Not enough memory to add "
 				   "new multicast entry!\n");
 			break;
 		}
-		memset(ipm, 0, sizeof(struct lcs_ipm_list));
 		memcpy(&ipm->ipm.mac_addr, buf, LCS_MAC_LENGTH);
 		ipm->ipm.ip_addr = im4->multiaddr;
 		ipm->ipm_state = LCS_IPM_STATE_SET_REQUIRED;
 		spin_lock_irqsave(&card->ipm_lock, flags);
+		LCS_DBF_HEX(2,trace,&ipm->ipm.ip_addr,4);
 		list_add(&ipm->list, &card->ipm_list);
 		spin_unlock_irqrestore(&card->ipm_lock, flags);
 	}
@@ -1269,7 +1265,15 @@ lcs_register_mc_addresses(void *data)
 	read_unlock(&in4_dev->mc_list_lock);
 	in_dev_put(in4_dev);
 
+	netif_carrier_off(card->dev);
+	netif_tx_disable(card->dev);
+	wait_event(card->write.wait_q,
+			(card->write.state != CH_STATE_RUNNING));
 	lcs_fix_multicast_list(card);
+	if (card->state == DEV_STATE_UP) {
+		netif_carrier_on(card->dev);
+		netif_wake_queue(card->dev);
+	}
 out:
 	lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
 	return 0;
@@ -1286,7 +1290,7 @@ lcs_set_multicast_list(struct net_device *dev)
         LCS_DBF_TEXT(4, trace, "setmulti");
         card = (struct lcs_card *) dev->priv;
 
-        if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD)) 
+        if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
 		schedule_work(&card->kernel_thread_starter);
 }
 
@@ -1318,6 +1322,53 @@ lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
 	return PTR_ERR(irb);
 }
 
+static int
+lcs_get_problem(struct ccw_device *cdev, struct irb *irb)
+{
+	int dstat, cstat;
+	char *sense;
+
+	sense = (char *) irb->ecw;
+	cstat = irb->scsw.cstat;
+	dstat = irb->scsw.dstat;
+
+	if (cstat & (SCHN_STAT_CHN_CTRL_CHK | SCHN_STAT_INTF_CTRL_CHK |
+		     SCHN_STAT_CHN_DATA_CHK | SCHN_STAT_CHAIN_CHECK |
+		     SCHN_STAT_PROT_CHECK   | SCHN_STAT_PROG_CHECK)) {
+		LCS_DBF_TEXT(2, trace, "CGENCHK");
+		return 1;
+	}
+	if (dstat & DEV_STAT_UNIT_CHECK) {
+		if (sense[LCS_SENSE_BYTE_1] &
+		    LCS_SENSE_RESETTING_EVENT) {
+			LCS_DBF_TEXT(2, trace, "REVIND");
+			return 1;
+		}
+		if (sense[LCS_SENSE_BYTE_0] &
+		    LCS_SENSE_CMD_REJECT) {
+			LCS_DBF_TEXT(2, trace, "CMDREJ");
+			return 0;
+		}
+		if ((!sense[LCS_SENSE_BYTE_0]) &&
+		    (!sense[LCS_SENSE_BYTE_1]) &&
+		    (!sense[LCS_SENSE_BYTE_2]) &&
+		    (!sense[LCS_SENSE_BYTE_3])) {
+			LCS_DBF_TEXT(2, trace, "ZEROSEN");
+			return 0;
+		}
+		LCS_DBF_TEXT(2, trace, "DGENCHK");
+		return 1;
+	}
+	return 0;
+}
+
+void
+lcs_schedule_recovery(struct lcs_card *card)
+{
+	LCS_DBF_TEXT(2, trace, "startrec");
+	if (!lcs_set_thread_start_bit(card, LCS_RECOVERY_THREAD))
+		schedule_work(&card->kernel_thread_starter);
+}
 
 /**
  * IRQ Handler for LCS channels
@@ -1327,7 +1378,8 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 {
 	struct lcs_card *card;
 	struct lcs_channel *channel;
-	int index;
+	int rc, index;
+	int cstat, dstat;
 
 	if (lcs_check_irb_error(cdev, irb))
 		return;
@@ -1338,17 +1390,30 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	else
 		channel = &card->write;
 
+	cstat = irb->scsw.cstat;
+	dstat = irb->scsw.dstat;
 	LCS_DBF_TEXT_(5, trace, "Rint%s",cdev->dev.bus_id);
 	LCS_DBF_TEXT_(5, trace, "%4x%4x",irb->scsw.cstat, irb->scsw.dstat);
 	LCS_DBF_TEXT_(5, trace, "%4x%4x",irb->scsw.fctl, irb->scsw.actl);
 
+	/* Check for channel and device errors presented */
+	rc = lcs_get_problem(cdev, irb);
+	if (rc || (dstat & DEV_STAT_UNIT_EXCEP)) {
+		PRINT_WARN("check on device %s, dstat=0x%X, cstat=0x%X \n",
+			    cdev->dev.bus_id, dstat, cstat);
+		if (rc) {
+			lcs_schedule_recovery(card);
+			wake_up(&card->wait_q);
+			return;
+		}
+	}
 	/* How far in the ccw chain have we processed? */
 	if ((channel->state != CH_STATE_INIT) &&
 	    (irb->scsw.fctl & SCSW_FCTL_START_FUNC)) {
-		index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa) 
+		index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa)
 			- channel->ccws;
 		if ((irb->scsw.actl & SCSW_ACTL_SUSPENDED) ||
-		    (irb->scsw.cstat | SCHN_STAT_PCI))
+		    (irb->scsw.cstat & SCHN_STAT_PCI))
 			/* Bloody io subsystem tells us lies about cpa... */
 			index = (index - 1) & (LCS_NUM_BUFFS - 1);
 		while (channel->io_idx != index) {
@@ -1367,7 +1432,6 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	else if (irb->scsw.actl & SCSW_ACTL_SUSPENDED)
 		/* CCW execution stopped on a suspend bit. */
 		channel->state = CH_STATE_SUSPENDED;
-
 	if (irb->scsw.fctl & SCSW_FCTL_HALT_FUNC) {
 		if (irb->scsw.cc != 0) {
 			ccw_device_halt(channel->ccwdev, (addr_t) channel);
@@ -1376,7 +1440,6 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 		/* The channel has been stopped by halt_IO. */
 		channel->state = CH_STATE_HALTED;
 	}
-
 	if (irb->scsw.fctl & SCSW_FCTL_CLEAR_FUNC) {
 		channel->state = CH_STATE_CLEARED;
 	}
@@ -1452,7 +1515,7 @@ lcs_txbuffer_cb(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	lcs_release_buffer(channel, buffer);
 	card = (struct lcs_card *)
 		((char *) channel - offsetof(struct lcs_card, write));
-	if (netif_queue_stopped(card->dev))
+	if (netif_queue_stopped(card->dev) && netif_carrier_ok(card->dev))
 		netif_wake_queue(card->dev);
 	spin_lock(&card->lock);
 	card->tx_emitted--;
@@ -1488,6 +1551,10 @@ __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
 		card->stats.tx_carrier_errors++;
 		return 0;
 	}
+	if (skb->protocol == htons(ETH_P_IPV6)) {
+		dev_kfree_skb(skb);
+		return 0;
+	}
 	netif_stop_queue(card->dev);
 	spin_lock(&card->lock);
 	if (card->tx_buffer != NULL &&
@@ -1633,30 +1700,6 @@ lcs_detect(struct lcs_card *card)
 }
 
 /**
- * reset card
- */
-static int
-lcs_resetcard(struct lcs_card *card)
-{
-	int retries;
-
-	LCS_DBF_TEXT(2, trace, "rescard");
-	for (retries = 0; retries < 10; retries++) {
-		if (lcs_detect(card) == 0) {
-			netif_wake_queue(card->dev);
-			card->state = DEV_STATE_UP;
-			PRINT_INFO("LCS device %s successfully restarted!\n",
-				   card->dev->name);
-			return 0;
-		}
-		msleep(3000);
-	}
-	PRINT_ERR("Error in Reseting LCS card!\n");
-	return -EIO;
-}
-
-
-/**
  * LCS Stop card
  */
 static int
@@ -1680,126 +1723,18 @@ lcs_stopcard(struct lcs_card *card)
 }
 
 /**
- * LGW initiated commands
- */
-static int
-lcs_lgw_startlan_thread(void *data)
-{
-	struct lcs_card *card;
-
-	card = (struct lcs_card *) data;
-	daemonize("lgwstpln");
-
-	if (!lcs_do_run_thread(card, LCS_STARTLAN_THREAD))
-		return 0;
-	LCS_DBF_TEXT(4, trace, "lgwstpln");
-	if (card->dev)
-		netif_stop_queue(card->dev);
-	if (lcs_startlan(card) == 0) {
-		netif_wake_queue(card->dev);
-		card->state = DEV_STATE_UP;
-		PRINT_INFO("LCS Startlan for device %s succeeded!\n",
-			   card->dev->name);
-
-	} else
-		PRINT_ERR("LCS Startlan for device %s failed!\n",
-			  card->dev->name);
-	lcs_clear_thread_running_bit(card, LCS_STARTLAN_THREAD);
-	return 0;
-}
-
-/**
- * Send startup command initiated by Lan Gateway
- */
-static int
-lcs_lgw_startup_thread(void *data)
-{
-	int rc;
-
-	struct lcs_card *card;
-
-	card = (struct lcs_card *) data;
-	daemonize("lgwstaln");
-
-	if (!lcs_do_run_thread(card, LCS_STARTUP_THREAD))
-		return 0;
-	LCS_DBF_TEXT(4, trace, "lgwstaln");
-	if (card->dev)
-		netif_stop_queue(card->dev);
-	rc = lcs_send_startup(card, LCS_INITIATOR_LGW);
-	if (rc != 0) {
-		PRINT_ERR("Startup for LCS device %s initiated " \
-			  "by LGW failed!\nReseting card ...\n",
-			  card->dev->name);
-		/* do a card reset */
-		rc = lcs_resetcard(card);
-		if (rc == 0)
-			goto Done;
-	}
-	rc = lcs_startlan(card);
-	if (rc == 0) {
-		netif_wake_queue(card->dev);
-		card->state = DEV_STATE_UP;
-	}
-Done:
-	if (rc == 0)
-		PRINT_INFO("LCS Startup for device %s succeeded!\n",
-			   card->dev->name);
-	else
-		PRINT_ERR("LCS Startup for device %s failed!\n",
-			  card->dev->name);
-	lcs_clear_thread_running_bit(card, LCS_STARTUP_THREAD);
-	return 0;
-}
-
-
-/**
- * send stoplan command initiated by Lan Gateway
- */
-static int
-lcs_lgw_stoplan_thread(void *data)
-{
-	struct lcs_card *card;
-	int rc;
-
-	card = (struct lcs_card *) data;
-	daemonize("lgwstop");
-
-	if (!lcs_do_run_thread(card, LCS_STOPLAN_THREAD))
-		return 0;
-	LCS_DBF_TEXT(4, trace, "lgwstop");
-	if (card->dev)
-		netif_stop_queue(card->dev);
-	if (lcs_send_stoplan(card, LCS_INITIATOR_LGW) == 0)
-		PRINT_INFO("Stoplan for %s initiated by LGW succeeded!\n",
-			   card->dev->name);
-	else
-		PRINT_ERR("Stoplan %s initiated by LGW failed!\n",
-			  card->dev->name);
-	/*Try to reset the card, stop it on failure */
-        rc = lcs_resetcard(card);
-        if (rc != 0)
-                rc = lcs_stopcard(card);
-	lcs_clear_thread_running_bit(card, LCS_STOPLAN_THREAD);
-        return rc;
-}
-
-/**
  * Kernel Thread helper functions for LGW initiated commands
  */
 static void
 lcs_start_kernel_thread(struct lcs_card *card)
 {
 	LCS_DBF_TEXT(5, trace, "krnthrd");
-	if (lcs_do_start_thread(card, LCS_STARTUP_THREAD))
-		kernel_thread(lcs_lgw_startup_thread, (void *) card, SIGCHLD);
-	if (lcs_do_start_thread(card, LCS_STARTLAN_THREAD))
-		kernel_thread(lcs_lgw_startlan_thread, (void *) card, SIGCHLD);
-	if (lcs_do_start_thread(card, LCS_STOPLAN_THREAD))
-		kernel_thread(lcs_lgw_stoplan_thread, (void *) card, SIGCHLD);
+	if (lcs_do_start_thread(card, LCS_RECOVERY_THREAD))
+		kernel_thread(lcs_recovery, (void *) card, SIGCHLD);
 #ifdef CONFIG_IP_MULTICAST
 	if (lcs_do_start_thread(card, LCS_SET_MC_THREAD))
-		kernel_thread(lcs_register_mc_addresses, (void *) card, SIGCHLD);
+		kernel_thread(lcs_register_mc_addresses,
+				(void *) card, SIGCHLD);
 #endif
 }
 
@@ -1813,19 +1748,14 @@ lcs_get_control(struct lcs_card *card, struct lcs_cmd *cmd)
 	if (cmd->initiator == LCS_INITIATOR_LGW) {
 		switch(cmd->cmd_code) {
 		case LCS_CMD_STARTUP:
-			if (!lcs_set_thread_start_bit(card,
-						      LCS_STARTUP_THREAD))
-				schedule_work(&card->kernel_thread_starter);
-			break;
 		case LCS_CMD_STARTLAN:
-			if (!lcs_set_thread_start_bit(card,
-						      LCS_STARTLAN_THREAD))
-				schedule_work(&card->kernel_thread_starter);
+			lcs_schedule_recovery(card);
 			break;
 		case LCS_CMD_STOPLAN:
-			if (!lcs_set_thread_start_bit(card,
-						      LCS_STOPLAN_THREAD))
-				schedule_work(&card->kernel_thread_starter);
+			PRINT_WARN("Stoplan for %s initiated by LGW.\n",
+					card->dev->name);
+			if (card->dev)
+				netif_carrier_off(card->dev);
 			break;
 		default:
 			PRINT_INFO("UNRECOGNIZED LGW COMMAND\n");
@@ -1941,8 +1871,11 @@ lcs_stop_device(struct net_device *dev)
 
 	LCS_DBF_TEXT(2, trace, "stopdev");
 	card   = (struct lcs_card *) dev->priv;
-	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+	netif_tx_disable(dev);
 	dev->flags &= ~IFF_UP;
+	wait_event(card->write.wait_q,
+		(card->write.state != CH_STATE_RUNNING));
 	rc = lcs_stopcard(card);
 	if (rc)
 		PRINT_ERR("Try it again!\n ");
@@ -1968,6 +1901,7 @@ lcs_open_device(struct net_device *dev)
 
 	} else {
 		dev->flags |= IFF_UP;
+		netif_carrier_on(dev);
 		netif_wake_queue(dev);
 		card->state = DEV_STATE_UP;
 	}
@@ -2059,10 +1993,31 @@ lcs_timeout_store (struct device *dev, struct device_attribute *attr, const char
 
 DEVICE_ATTR(lancmd_timeout, 0644, lcs_timeout_show, lcs_timeout_store);
 
+static ssize_t
+lcs_dev_recover_store(struct device *dev, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct lcs_card *card = dev->driver_data;
+	char *tmp;
+	int i;
+
+	if (!card)
+		return -EINVAL;
+	if (card->state != DEV_STATE_UP)
+		return -EPERM;
+	i = simple_strtoul(buf, &tmp, 16);
+	if (i == 1)
+		lcs_schedule_recovery(card);
+	return count;
+}
+
+static DEVICE_ATTR(recover, 0200, NULL, lcs_dev_recover_store);
+
 static struct attribute * lcs_attrs[] = {
 	&dev_attr_portno.attr,
 	&dev_attr_type.attr,
 	&dev_attr_lancmd_timeout.attr,
+	&dev_attr_recover.attr,
 	NULL,
 };
 
@@ -2099,6 +2054,12 @@ lcs_probe_device(struct ccwgroup_device *ccwgdev)
 	ccwgdev->dev.driver_data = card;
 	ccwgdev->cdev[0]->handler = lcs_irq;
 	ccwgdev->cdev[1]->handler = lcs_irq;
+	card->gdev = ccwgdev;
+	INIT_WORK(&card->kernel_thread_starter,
+		  (void *) lcs_start_kernel_thread, card);
+	card->thread_start_mask = 0;
+	card->thread_allowed_mask = 0;
+	card->thread_running_mask = 0;
         return 0;
 }
 
@@ -2200,6 +2161,7 @@ netdev_out:
 	if (recover_state == DEV_STATE_RECOVER) {
 		lcs_set_multicast_list(card->dev);
 		card->dev->flags |= IFF_UP;
+		netif_carrier_on(card->dev);
 		netif_wake_queue(card->dev);
 		card->state = DEV_STATE_UP;
 	} else {
@@ -2229,7 +2191,7 @@ out:
  * lcs_shutdown_device, called when setting the group device offline.
  */
 static int
-lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
+__lcs_shutdown_device(struct ccwgroup_device *ccwgdev, int recovery_mode)
 {
 	struct lcs_card *card;
 	enum lcs_dev_states recover_state;
@@ -2239,9 +2201,11 @@ lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
 	card = (struct lcs_card *)ccwgdev->dev.driver_data;
 	if (!card)
 		return -ENODEV;
-	lcs_set_allowed_threads(card, 0);
-	if (lcs_wait_for_threads(card, LCS_SET_MC_THREAD))
-		return -ERESTARTSYS;
+	if (recovery_mode == 0) {
+		lcs_set_allowed_threads(card, 0);
+		if (lcs_wait_for_threads(card, LCS_SET_MC_THREAD))
+			return -ERESTARTSYS;
+	}
 	LCS_DBF_HEX(3, setup, &card, sizeof(void*));
 	recover_state = card->state;
 
@@ -2256,6 +2220,43 @@ lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
 	return 0;
 }
 
+static int
+lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
+{
+	return __lcs_shutdown_device(ccwgdev, 0);
+}
+
+/**
+ * drive lcs recovery after startup and startlan initiated by Lan Gateway
+ */
+static int
+lcs_recovery(void *ptr)
+{
+	struct lcs_card *card;
+	struct ccwgroup_device *gdev;
+        int rc;
+
+	card = (struct lcs_card *) ptr;
+	daemonize("lcs_recover");
+
+	LCS_DBF_TEXT(4, trace, "recover1");
+	if (!lcs_do_run_thread(card, LCS_RECOVERY_THREAD))
+		return 0;
+	LCS_DBF_TEXT(4, trace, "recover2");
+	gdev = card->gdev;
+	PRINT_WARN("Recovery of device %s started...\n", gdev->dev.bus_id);
+	rc = __lcs_shutdown_device(gdev, 1);
+	rc = lcs_new_device(gdev);
+	if (!rc)
+		PRINT_INFO("Device %s successfully recovered!\n",
+				card->dev->name);
+	else
+		PRINT_INFO("Device %s could not be recovered!\n",
+				card->dev->name);
+	lcs_clear_thread_running_bit(card, LCS_RECOVERY_THREAD);
+	return 0;
+}
+
 /**
  * lcs_remove_device, free buffers and card
  */
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index 2fad5e40c2e..93143932983 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -73,13 +73,17 @@ do {                                       \
 /**
  * LCS sense byte definitions
  */
+#define LCS_SENSE_BYTE_0 		0
+#define LCS_SENSE_BYTE_1 		1
+#define LCS_SENSE_BYTE_2 		2
+#define LCS_SENSE_BYTE_3 		3
 #define LCS_SENSE_INTERFACE_DISCONNECT	0x01
 #define LCS_SENSE_EQUIPMENT_CHECK	0x10
 #define LCS_SENSE_BUS_OUT_CHECK		0x20
 #define LCS_SENSE_INTERVENTION_REQUIRED 0x40
 #define LCS_SENSE_CMD_REJECT		0x80
-#define LCS_SENSE_RESETTING_EVENT	0x0080
-#define LCS_SENSE_DEVICE_ONLINE		0x0020
+#define LCS_SENSE_RESETTING_EVENT	0x80
+#define LCS_SENSE_DEVICE_ONLINE		0x20
 
 /**
  * LCS packet type definitions
@@ -152,10 +156,9 @@ enum lcs_dev_states {
 
 enum lcs_threads {
 	LCS_SET_MC_THREAD 	= 1,
-	LCS_STARTLAN_THREAD	= 2,
-	LCS_STOPLAN_THREAD	= 4,
-	LCS_STARTUP_THREAD	= 8,
+	LCS_RECOVERY_THREAD 	= 2,
 };
+
 /**
  * LCS struct declarations
  */
@@ -286,6 +289,7 @@ struct lcs_card {
 	struct net_device_stats stats;
 	unsigned short (*lan_type_trans)(struct sk_buff *skb,
 					 struct net_device *dev);
+	struct ccwgroup_device *gdev;
 	struct lcs_channel read;
 	struct lcs_channel write;
 	struct lcs_buffer *tx_buffer;
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 260a93c8c44..b452cc1afd5 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -30,7 +30,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
+
 #undef DEBUG
 
 #include <linux/module.h>
@@ -65,7 +65,7 @@ MODULE_AUTHOR
     ("(C) 2001 IBM Corporation by Fritz Elfert (felfert@millenux.com)");
 MODULE_DESCRIPTION ("Linux for S/390 IUCV network driver");
 
-
+
 #define PRINTK_HEADER " iucv: "       /* for debugging */
 
 static struct device_driver netiucv_driver = {
@@ -202,7 +202,7 @@ netiucv_printname(char *name)
 	*p = '\0';
 	return tmp;
 }
-
+
 /**
  * States of the interface statemachine.
  */
@@ -244,7 +244,7 @@ static const char *dev_event_names[] = {
 	"Connection up",
 	"Connection down",
 };
-
+
 /**
  * Events of the connection statemachine
  */
@@ -364,7 +364,7 @@ static const char *conn_state_names[] = {
 	"Connect error",
 };
 
-
+
 /**
  * Debug Facility Stuff
  */
@@ -516,7 +516,7 @@ static void
 fsm_action_nop(fsm_instance *fi, int event, void *arg)
 {
 }
-
+
 /**
  * Actions of the connection statemachine
  *****************************************************************************/
@@ -993,7 +993,7 @@ static const fsm_node conn_fsm[] = {
 
 static const int CONN_FSM_LEN = sizeof(conn_fsm) / sizeof(fsm_node);
 
-
+
 /**
  * Actions for interface - statemachine.
  *****************************************************************************/
@@ -1182,7 +1182,7 @@ netiucv_transmit_skb(struct iucv_connection *conn, struct sk_buff *skb) {
 
 		fsm_newstate(conn->fsm, CONN_STATE_TX);
 		conn->prof.send_stamp = xtime;
-		
+
 		rc = iucv_send(conn->pathid, NULL, 0, 0, 1 /* single_flag */,
 			0, nskb->data, nskb->len);
 			       /* Shut up, gcc! nskb is always below 2G. */
@@ -1220,7 +1220,7 @@ netiucv_transmit_skb(struct iucv_connection *conn, struct sk_buff *skb) {
 
 	return rc;
 }
-
+
 /**
  * Interface API for upper network layers
  *****************************************************************************/
@@ -1291,7 +1291,7 @@ static int netiucv_tx(struct sk_buff *skb, struct net_device *dev)
 
 	/**
 	 * If connection is not running, try to restart it
-	 * and throw away packet. 
+	 * and throw away packet.
 	 */
 	if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) {
 		fsm_event(privptr->fsm, DEV_EVENT_START, dev);
@@ -1538,7 +1538,7 @@ static ssize_t
 maxcq_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.maxcqueue = 0;
 	return count;
@@ -1559,7 +1559,7 @@ static ssize_t
 sdoio_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.doios_single = 0;
 	return count;
@@ -1580,7 +1580,7 @@ static ssize_t
 mdoio_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
 	priv->conn->prof.doios_multi = 0;
 	return count;
@@ -1601,7 +1601,7 @@ static ssize_t
 txlen_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.txlen = 0;
 	return count;
@@ -1622,7 +1622,7 @@ static ssize_t
 txtime_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.tx_time = 0;
 	return count;
@@ -2000,7 +2000,7 @@ conn_write(struct device_driver *drv, const char *buf, size_t count)
 	}
 
 	PRINT_INFO("%s: '%s'\n", dev->name, netiucv_printname(username));
-	
+
 	return count;
 
 out_free_ndev:
@@ -2099,7 +2099,7 @@ static int __init
 netiucv_init(void)
 {
 	int ret;
-	
+
 	ret = iucv_register_dbf_views();
 	if (ret) {
 		PRINT_WARN("netiucv_init failed, "
@@ -2128,7 +2128,7 @@ netiucv_init(void)
 	}
 	return ret;
 }
-	
+
 module_init(netiucv_init);
 module_exit(netiucv_exit);
 MODULE_LICENSE("GPL");
diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h
index 4df0fcd7b10..619f4a0c716 100644
--- a/drivers/s390/net/qeth.h
+++ b/drivers/s390/net/qeth.h
@@ -376,7 +376,7 @@ struct qeth_hdr_osn {
 	__u8 reserved3[18];
 	__u32 ccid;
 } __attribute__ ((packed));
-					    
+
 struct qeth_hdr {
 	union {
 		struct qeth_hdr_layer2 l2;
@@ -825,7 +825,7 @@ struct qeth_card {
 	int use_hard_stop;
 	int (*orig_hard_header)(struct sk_buff *,struct net_device *,
 				unsigned short,void *,void *,unsigned);
-	struct qeth_osn_info osn_info; 
+	struct qeth_osn_info osn_info;
 };
 
 struct qeth_card_list_struct {
@@ -944,7 +944,7 @@ qeth_get_netdev_flags(struct qeth_card *card)
 		return 0;
 	switch (card->info.type) {
 	case QETH_CARD_TYPE_IQD:
-	case QETH_CARD_TYPE_OSN:	
+	case QETH_CARD_TYPE_OSN:
 		return IFF_NOARP;
 #ifdef CONFIG_QETH_IPV6
 	default:
@@ -981,7 +981,7 @@ static inline int
 qeth_get_max_mtu_for_card(int cardtype)
 {
 	switch (cardtype) {
-		
+
 	case QETH_CARD_TYPE_UNKNOWN:
 	case QETH_CARD_TYPE_OSAE:
 	case QETH_CARD_TYPE_OSN:
@@ -1097,9 +1097,9 @@ qeth_string_to_ipaddr4(const char *buf, __u8 *addr)
 	int count = 0, rc = 0;
 	int in[4];
 
-	rc = sscanf(buf, "%d.%d.%d.%d%n", 
+	rc = sscanf(buf, "%d.%d.%d.%d%n",
 		    &in[0], &in[1], &in[2], &in[3], &count);
-	if (rc != 4  || count) 
+	if (rc != 4  || count<=0)
 		return -EINVAL;
 	for (count = 0; count < 4; count++) {
 		if (in[count] > 255)
@@ -1131,7 +1131,7 @@ qeth_string_to_ipaddr6(const char *buf, __u8 *addr)
 
 	cnt = out = found = save_cnt = num2 = 0;
         end = start = (char *) buf;
-	in = (__u16 *) addr;	
+	in = (__u16 *) addr;
 	memset(in, 0, 16);
         while (end) {
                 end = strchr(end,':');
@@ -1139,7 +1139,7 @@ qeth_string_to_ipaddr6(const char *buf, __u8 *addr)
                         end = (char *)buf + (strlen(buf));
                         out = 1;
                 }
-                if ((end - start)) { 
+                if ((end - start)) {
                         memset(num, 0, 5);
                         memcpy(num, start, end - start);
 			if (!qeth_isxdigit(num))
@@ -1241,5 +1241,5 @@ qeth_osn_register(unsigned char *read_dev_no,
 
 extern void
 qeth_osn_deregister(struct net_device *);
-		
+
 #endif /* __QETH_H__ */
diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c
index 44e226f211e..0bab60a2030 100644
--- a/drivers/s390/net/qeth_eddp.c
+++ b/drivers/s390/net/qeth_eddp.c
@@ -81,7 +81,7 @@ void
 qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *buf)
 {
 	struct qeth_eddp_context_reference *ref;
-	
+
 	QETH_DBF_TEXT(trace, 6, "eddprctx");
 	while (!list_empty(&buf->ctx_list)){
 		ref = list_entry(buf->ctx_list.next,
@@ -135,7 +135,7 @@ qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue,
 					   "buffer!\n");
 				goto out;
 			}
-		}		
+		}
 		/* check if the whole next skb fits into current buffer */
 		if ((QETH_MAX_BUFFER_ELEMENTS(queue->card) -
 					buf->next_element_to_fill)
@@ -148,7 +148,7 @@ qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue,
 			 * and increment ctx's refcnt */
 			must_refcnt = 1;
 			continue;
-		}	
+		}
 		if (must_refcnt){
 			must_refcnt = 0;
 			if (qeth_eddp_buf_ref_context(buf, ctx)){
@@ -266,7 +266,7 @@ qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len,
 	int left_in_frag;
 	int copy_len;
 	u8 *src;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpcdtc");
 	if (skb_shinfo(eddp->skb)->nr_frags == 0) {
 		memcpy(dst, eddp->skb->data + eddp->skb_offset, len);
@@ -408,7 +408,7 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
 	struct tcphdr *tcph;
 	int data_len;
 	u32 hcsum;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpftcp");
 	eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl;
        if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) {
@@ -465,13 +465,13 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
 		eddp->th.tcp.h.seq += data_len;
 	}
 }
-			   
+
 static inline int
 qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
 			   struct sk_buff *skb, struct qeth_hdr *qhdr)
 {
 	struct qeth_eddp_data *eddp = NULL;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpficx");
 	/* create our segmentation headers and copy original headers */
 	if (skb->protocol == ETH_P_IP)
@@ -512,7 +512,7 @@ qeth_eddp_calc_num_pages(struct qeth_eddp_context *ctx, struct sk_buff *skb,
 			 int hdr_len)
 {
 	int skbs_per_page;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpcanp");
 	/* can we put multiple skbs in one page? */
 	skbs_per_page = PAGE_SIZE / (skb_shinfo(skb)->tso_size + hdr_len);
@@ -588,7 +588,7 @@ qeth_eddp_create_context_tcp(struct qeth_card *card, struct sk_buff *skb,
 			     struct qeth_hdr *qhdr)
 {
 	struct qeth_eddp_context *ctx = NULL;
-	
+
 	QETH_DBF_TEXT(trace, 5, "creddpct");
 	if (skb->protocol == ETH_P_IP)
 		ctx = qeth_eddp_create_context_generic(card, skb,
diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h
index e422b41c656..61faf05517d 100644
--- a/drivers/s390/net/qeth_fs.h
+++ b/drivers/s390/net/qeth_fs.h
@@ -42,7 +42,7 @@ qeth_create_device_attributes_osn(struct device *dev);
 
 extern void
 qeth_remove_device_attributes_osn(struct device *dev);
-		    
+
 extern int
 qeth_create_driver_attributes(void);
 
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index b3c6e790779..9e671a48cd2 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -513,7 +513,7 @@ __qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode)
 
 	QETH_DBF_TEXT(setup, 3, "setoffl");
 	QETH_DBF_HEX(setup, 3, &card, sizeof(void *));
-	
+
 	if (card->dev && netif_carrier_ok(card->dev))
 		netif_carrier_off(card->dev);
 	recover_flag = card->state;
@@ -604,13 +604,13 @@ __qeth_ref_ip_on_card(struct qeth_card *card, struct qeth_ipaddr *todo,
 	list_for_each_entry(addr, &card->ip_list, entry) {
 		if (card->options.layer2) {
 			if ((addr->type == todo->type) &&
-			    (memcmp(&addr->mac, &todo->mac, 
+			    (memcmp(&addr->mac, &todo->mac,
 				    OSA_ADDR_LEN) == 0)) {
 				found = 1;
 				break;
 			}
 			continue;
-		} 
+		}
 		if ((addr->proto     == QETH_PROT_IPV4)  &&
 		    (todo->proto     == QETH_PROT_IPV4)  &&
 		    (addr->type      == todo->type)      &&
@@ -694,13 +694,13 @@ __qeth_insert_ip_todo(struct qeth_card *card, struct qeth_ipaddr *addr, int add)
 		if (card->options.layer2) {
 			if ((tmp->type	== addr->type)	&&
 			    (tmp->is_multicast == addr->is_multicast) &&
-			    (memcmp(&tmp->mac, &addr->mac, 
+			    (memcmp(&tmp->mac, &addr->mac,
 				    OSA_ADDR_LEN) == 0)) {
 				found = 1;
 				break;
 			}
 			continue;
-		} 	 
+		}
 		if ((tmp->proto        == QETH_PROT_IPV4)     &&
 		    (addr->proto       == QETH_PROT_IPV4)     &&
 		    (tmp->type         == addr->type)         &&
@@ -1173,7 +1173,7 @@ qeth_determine_card_type(struct qeth_card *card)
 					   "due to hardware limitations!\n");
 				card->qdio.no_out_queues = 1;
 				card->qdio.default_out_queue = 0;
-			} 
+			}
 			return 0;
 		}
 		i++;
@@ -1198,7 +1198,7 @@ qeth_probe_device(struct ccwgroup_device *gdev)
 		return -ENODEV;
 
 	QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id);
-	
+
 	card = qeth_alloc_card();
 	if (!card) {
 		put_device(dev);
@@ -1220,7 +1220,7 @@ qeth_probe_device(struct ccwgroup_device *gdev)
 		put_device(dev);
 		qeth_free_card(card);
 		return rc;
-	}			    
+	}
 	if ((rc = qeth_setup_card(card))){
 		QETH_DBF_TEXT_(setup, 2, "2err%d", rc);
 		put_device(dev);
@@ -1843,7 +1843,7 @@ struct qeth_cmd_buffer *iob)
 	       &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH);
 	QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN);
 }
-						    
+
 static int
 qeth_send_control_data(struct qeth_card *card, int len,
 		       struct qeth_cmd_buffer *iob,
@@ -1937,7 +1937,7 @@ qeth_osn_send_control_data(struct qeth_card *card, int len,
 		wake_up(&card->wait_q);
 	}
 	return rc;
-}					
+}
 
 static inline void
 qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
@@ -1966,7 +1966,7 @@ qeth_osn_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
 	memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2);
 	return qeth_osn_send_control_data(card, s1, iob);
 }
-							    
+
 static int
 qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
 		  int (*reply_cb)
@@ -2579,7 +2579,7 @@ qeth_process_inbound_buffer(struct qeth_card *card,
 		skb->dev = card->dev;
 		if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2)
 			vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr);
-		else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)     
+		else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)
 			qeth_rebuild_skb(card, skb, hdr);
 		else { /*in case of OSN*/
 			skb_push(skb, sizeof(struct qeth_hdr));
@@ -2763,7 +2763,7 @@ qeth_qdio_input_handler(struct ccw_device * ccwdev, unsigned int status,
 		index = i % QDIO_MAX_BUFFERS_PER_Q;
 		buffer = &card->qdio.in_q->bufs[index];
 		if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) &&
-		      qeth_check_qdio_errors(buffer->buffer, 
+		      qeth_check_qdio_errors(buffer->buffer,
 					     qdio_err, siga_err,"qinerr")))
 			qeth_process_inbound_buffer(card, buffer, index);
 		/* clear buffer and give back to hardware */
@@ -3187,7 +3187,7 @@ qeth_alloc_qdio_buffers(struct qeth_card *card)
 	if (card->qdio.state == QETH_QDIO_ALLOCATED)
 		return 0;
 
-	card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), 
+	card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q),
 				  GFP_KERNEL|GFP_DMA);
 	if (!card->qdio.in_q)
 		return - ENOMEM;
@@ -3476,7 +3476,7 @@ qeth_halt_channels(struct qeth_card *card)
 	rc3 = qeth_halt_channel(&card->data);
 	if (rc1)
 		return rc1;
-	if (rc2) 
+	if (rc2)
 		return rc2;
 	return rc3;
 }
@@ -3491,7 +3491,7 @@ qeth_clear_channels(struct qeth_card *card)
 	rc3 = qeth_clear_channel(&card->data);
 	if (rc1)
 		return rc1;
-	if (rc2) 
+	if (rc2)
 		return rc2;
 	return rc3;
 }
@@ -3798,10 +3798,10 @@ qeth_open(struct net_device *dev)
 		QETH_DBF_TEXT(trace,4,"nomacadr");
 		return -EPERM;
 	}
-	card->dev->flags |= IFF_UP;
-	netif_start_queue(dev);
 	card->data.state = CH_STATE_UP;
 	card->state = CARD_STATE_UP;
+	card->dev->flags |= IFF_UP;
+	netif_start_queue(dev);
 
 	if (!card->lan_online && netif_carrier_ok(dev))
 		netif_carrier_off(dev);
@@ -3817,7 +3817,7 @@ qeth_stop(struct net_device *dev)
 
 	card = (struct qeth_card *) dev->priv;
 
-	netif_stop_queue(dev);
+	netif_tx_disable(dev);
 	card->dev->flags &= ~IFF_UP;
 	if (card->state == CARD_STATE_UP)
 		card->state = CARD_STATE_SOFTSETUP;
@@ -3958,7 +3958,7 @@ qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb,
 #endif
 	*hdr = (struct qeth_hdr *)
 		qeth_push_skb(card, skb, sizeof(struct qeth_hdr));
-	if (hdr == NULL)
+	if (*hdr == NULL)
 		return -EINVAL;
 	return 0;
 }
@@ -4098,7 +4098,7 @@ qeth_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 		}
 	} else { /* passthrough */
                 if((skb->dev->type == ARPHRD_IEEE802_TR) &&
-		    !memcmp(skb->data + sizeof(struct qeth_hdr) + 
+		    !memcmp(skb->data + sizeof(struct qeth_hdr) +
 		    sizeof(__u16), skb->dev->broadcast, 6)) {
 			hdr->hdr.l3.flags = QETH_CAST_BROADCAST |
 						QETH_HDR_PASSTHRU;
@@ -4385,7 +4385,7 @@ out:
 }
 
 static inline int
-qeth_get_elements_no(struct qeth_card *card, void *hdr, 
+qeth_get_elements_no(struct qeth_card *card, void *hdr,
 		     struct sk_buff *skb, int elems)
 {
 	int elements_needed = 0;
@@ -4416,6 +4416,8 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
 	int tx_bytes = skb->len;
+	unsigned short nr_frags = skb_shinfo(skb)->nr_frags;
+	unsigned short tso_size = skb_shinfo(skb)->tso_size;
 	int rc;
 
 	QETH_DBF_TEXT(trace, 6, "sendpkt");
@@ -4441,7 +4443,7 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 		return 0;
 	}
 	cast_type = qeth_get_cast_type(card, skb);
-	if ((cast_type == RTN_BROADCAST) && 
+	if ((cast_type == RTN_BROADCAST) &&
 	    (card->info.broadcast_capable == 0)){
 		card->stats.tx_dropped++;
 		card->stats.tx_errors++;
@@ -4463,7 +4465,7 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 			card->stats.tx_errors++;
 			dev_kfree_skb_any(skb);
 			return NETDEV_TX_OK;
-		} 
+		}
 		elements_needed++;
 	} else {
 		if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))) {
@@ -4498,16 +4500,16 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 		card->stats.tx_packets++;
 		card->stats.tx_bytes += tx_bytes;
 #ifdef CONFIG_QETH_PERF_STATS
-		if (skb_shinfo(skb)->tso_size &&
+		if (tso_size &&
 		   !(large_send == QETH_LARGE_SEND_NO)) {
-			card->perf_stats.large_send_bytes += skb->len;
+			card->perf_stats.large_send_bytes += tx_bytes;
 			card->perf_stats.large_send_cnt++;
 		}
- 		if (skb_shinfo(skb)->nr_frags > 0){
+ 		if (nr_frags > 0){
 			card->perf_stats.sg_skbs_sent++;
 			/* nr_frags + skb->data */
 			card->perf_stats.sg_frags_sent +=
-				skb_shinfo(skb)->nr_frags + 1;
+				nr_frags + 1;
 		}
 #endif /* CONFIG_QETH_PERF_STATS */
 	}
@@ -5373,7 +5375,7 @@ qeth_layer2_send_setdelvlan_cb(struct qeth_card *card,
         cmd = (struct qeth_ipa_cmd *) data;
         if (cmd->hdr.return_code) {
 		PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. "
-			  "Continuing\n",cmd->data.setdelvlan.vlan_id, 
+			  "Continuing\n",cmd->data.setdelvlan.vlan_id,
 			  QETH_CARD_IFNAME(card), cmd->hdr.return_code);
 		QETH_DBF_TEXT_(trace, 2, "L2VL%4x", cmd->hdr.command);
 		QETH_DBF_TEXT_(trace, 2, "L2%s", CARD_BUS_ID(card));
@@ -5393,7 +5395,7 @@ qeth_layer2_send_setdelvlan(struct qeth_card *card, __u16 i,
 	iob = qeth_get_ipacmd_buffer(card, ipacmd, QETH_PROT_IPV4);
 	cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
         cmd->data.setdelvlan.vlan_id = i;
-	return qeth_send_ipa_cmd(card, iob, 
+	return qeth_send_ipa_cmd(card, iob,
 				 qeth_layer2_send_setdelvlan_cb, NULL);
 }
 
@@ -5457,7 +5459,7 @@ qeth_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
  * Examine hardware response to SET_PROMISC_MODE
  */
 static int
-qeth_setadp_promisc_mode_cb(struct qeth_card *card, 
+qeth_setadp_promisc_mode_cb(struct qeth_card *card,
 			    struct qeth_reply *reply,
 			    unsigned long data)
 {
@@ -5468,10 +5470,10 @@ qeth_setadp_promisc_mode_cb(struct qeth_card *card,
 
 	cmd = (struct qeth_ipa_cmd *) data;
 	setparms = &(cmd->data.setadapterparms);
-	
+
         qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd);
-	if (cmd->hdr.return_code) { 
-		QETH_DBF_TEXT_(trace,4,"prmrc%2.2x",cmd->hdr.return_code);	
+	if (cmd->hdr.return_code) {
+		QETH_DBF_TEXT_(trace,4,"prmrc%2.2x",cmd->hdr.return_code);
 		setparms->data.mode = SET_PROMISC_MODE_OFF;
 	}
 	card->info.promisc_mode = setparms->data.mode;
@@ -5517,7 +5519,7 @@ qeth_set_multicast_list(struct net_device *dev)
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return ;
-	 
+
 	QETH_DBF_TEXT(trace, 3, "setmulti");
 	qeth_delete_mc_addresses(card);
 	if (card->options.layer2) {
@@ -5575,7 +5577,7 @@ qeth_osn_assist(struct net_device *dev,
 	struct qeth_cmd_buffer *iob;
 	struct qeth_card *card;
 	int rc;
-	
+
 	QETH_DBF_TEXT(trace, 2, "osnsdmc");
 	if (!dev)
 		return -ENODEV;
@@ -5654,7 +5656,7 @@ qeth_osn_deregister(struct net_device * dev)
 	card->osn_info.data_cb = NULL;
 	return;
 }
-					   
+
 static void
 qeth_delete_mc_addresses(struct qeth_card *card)
 {
@@ -5818,7 +5820,7 @@ qeth_add_multicast_ipv6(struct qeth_card *card)
 	struct inet6_dev *in6_dev;
 
 	QETH_DBF_TEXT(trace,4,"chkmcv6");
-	if (!qeth_is_supported(card, IPA_IPV6)) 
+	if (!qeth_is_supported(card, IPA_IPV6))
 		return ;
 	in6_dev = in6_dev_get(card->dev);
 	if (in6_dev == NULL)
@@ -6359,12 +6361,9 @@ qeth_netdev_init(struct net_device *dev)
 	dev->vlan_rx_kill_vid = qeth_vlan_rx_kill_vid;
 	dev->vlan_rx_add_vid = qeth_vlan_rx_add_vid;
 #endif
-	dev->hard_header = card->orig_hard_header;
 	if (qeth_get_netdev_flags(card) & IFF_NOARP) {
 		dev->rebuild_header = NULL;
 		dev->hard_header = NULL;
-		if (card->options.fake_ll)
-			dev->hard_header = qeth_fake_header;
 		dev->header_cache_update = NULL;
 		dev->hard_header_cache = NULL;
 	}
@@ -6373,6 +6372,9 @@ qeth_netdev_init(struct net_device *dev)
 	if (!(card->info.unique_id & UNIQUE_ID_NOT_BY_CARD))
 		card->dev->dev_id = card->info.unique_id & 0xffff;
 #endif
+	if (card->options.fake_ll &&
+		(qeth_get_netdev_flags(card) & IFF_NOARP))
+			dev->hard_header = qeth_fake_header;
 	dev->hard_header_parse = NULL;
 	dev->set_mac_address = qeth_layer2_set_mac_address;
 	dev->flags |= qeth_get_netdev_flags(card);
@@ -6477,6 +6479,9 @@ retry:
 	/*network device will be recovered*/
 	if (card->dev) {
 		card->dev->hard_header = card->orig_hard_header;
+		if (card->options.fake_ll &&
+		    (qeth_get_netdev_flags(card) & IFF_NOARP))
+			card->dev->hard_header = qeth_fake_header;
 		return 0;
 	}
 	/* at first set_online allocate netdev */
@@ -6584,7 +6589,7 @@ qeth_setadpparms_change_macaddr_cb(struct qeth_card *card,
 
 	cmd = (struct qeth_ipa_cmd *) data;
 	if (!card->options.layer2 || card->info.guestlan ||
-	    !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) {	
+	    !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) {
 		memcpy(card->dev->dev_addr,
 		       &cmd->data.setadapterparms.data.change_addr.addr,
 		       OSA_ADDR_LEN);
@@ -7031,14 +7036,12 @@ qeth_softsetup_ipv6(struct qeth_card *card)
 
 	QETH_DBF_TEXT(trace,3,"softipv6");
 
-	netif_stop_queue(card->dev);
 	rc = qeth_send_startlan(card, QETH_PROT_IPV6);
 	if (rc) {
 		PRINT_ERR("IPv6 startlan failed on %s\n",
 			  QETH_CARD_IFNAME(card));
 		return rc;
 	}
-	netif_wake_queue(card->dev);
 	rc = qeth_query_ipassists(card,QETH_PROT_IPV6);
 	if (rc) {
 		PRINT_ERR("IPv6 query ipassist failed on %s\n",
@@ -7352,7 +7355,8 @@ qeth_set_large_send(struct qeth_card *card, enum qeth_large_send_types type)
 		card->options.large_send = type;
 		return 0;
 	}
-	netif_stop_queue(card->dev);
+	if (card->state == CARD_STATE_UP)
+		netif_tx_disable(card->dev);
 	card->options.large_send = type;
 	switch (card->options.large_send) {
 	case QETH_LARGE_SEND_EDDP:
@@ -7374,7 +7378,8 @@ qeth_set_large_send(struct qeth_card *card, enum qeth_large_send_types type)
 		card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
 		break;
 	}
-	netif_wake_queue(card->dev);
+	if (card->state == CARD_STATE_UP)
+		netif_wake_queue(card->dev);
 	return rc;
 }
 
@@ -7427,7 +7432,7 @@ qeth_softsetup_card(struct qeth_card *card)
 	if ((rc = qeth_setrouting_v6(card)))
 		QETH_DBF_TEXT_(setup, 2, "5err%d", rc);
 out:
-	netif_stop_queue(card->dev);
+	netif_tx_disable(card->dev);
 	return 0;
 }
 
@@ -7567,7 +7572,7 @@ qeth_stop_card(struct qeth_card *card, int recovery_mode)
 	if (card->read.state == CH_STATE_UP &&
 	    card->write.state == CH_STATE_UP &&
 	    (card->state == CARD_STATE_UP)) {
-		if (recovery_mode && 
+		if (recovery_mode &&
 		    card->info.type != QETH_CARD_TYPE_OSN) {
 			qeth_stop(card->dev);
 		} else {
@@ -7736,10 +7741,8 @@ static int
 qeth_register_netdev(struct qeth_card *card)
 {
 	QETH_DBF_TEXT(setup, 3, "regnetd");
-	if (card->dev->reg_state != NETREG_UNINITIALIZED) {
-		qeth_netdev_init(card->dev);
+	if (card->dev->reg_state != NETREG_UNINITIALIZED)
 		return 0;
-	}
 	/* sysfs magic */
 	SET_NETDEV_DEV(card->dev, &card->gdev->dev);
 	return register_netdev(card->dev);
@@ -7750,7 +7753,7 @@ qeth_start_again(struct qeth_card *card, int recovery_mode)
 {
 	QETH_DBF_TEXT(setup ,2, "startag");
 
-	if (recovery_mode && 
+	if (recovery_mode &&
 	    card->info.type != QETH_CARD_TYPE_OSN) {
 		qeth_open(card->dev);
 	} else {
@@ -8014,7 +8017,6 @@ static int (*qeth_old_arp_constructor) (struct neighbour *);
 
 static struct neigh_ops arp_direct_ops_template = {
 	.family = AF_INET,
-	.destructor = NULL,
 	.solicit = NULL,
 	.error_report = NULL,
 	.output = dev_queue_xmit,
diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h
index 011c4104102..0477c47471c 100644
--- a/drivers/s390/net/qeth_mpc.h
+++ b/drivers/s390/net/qeth_mpc.h
@@ -445,7 +445,7 @@ enum qeth_ipa_arp_return_codes {
 /* Helper functions */
 #define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \
 			   (cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY))
-	
+
 /*****************************************************************************/
 /* END OF   IP Assist related definitions                                    */
 /*****************************************************************************/
@@ -490,7 +490,7 @@ extern unsigned char ULP_ENABLE[];
 /* Layer 2 defintions */
 #define QETH_PROT_LAYER2 0x08
 #define QETH_PROT_TCPIP  0x03
-#define QETH_PROT_OSN2   0x0a     
+#define QETH_PROT_OSN2   0x0a
 #define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer+0x50)
 #define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer+0x19)
 
diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c
index 360d782c7ad..66f2da14e6e 100644
--- a/drivers/s390/net/qeth_proc.c
+++ b/drivers/s390/net/qeth_proc.c
@@ -36,7 +36,7 @@ qeth_procfile_seq_start(struct seq_file *s, loff_t *offset)
 {
 	struct device *dev = NULL;
 	loff_t nr = 0;
-	
+
 	down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
 	if (*offset == 0)
 		return SEQ_START_TOKEN;
@@ -60,8 +60,8 @@ static void *
 qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
 {
 	struct device *prev, *next;
-	
-	if (it == SEQ_START_TOKEN) 
+
+	if (it == SEQ_START_TOKEN)
 		prev = NULL;
 	else
 		prev = (struct device *) it;
@@ -180,7 +180,7 @@ qeth_perf_procfile_seq_show(struct seq_file *s, void *it)
 	struct device *device;
 	struct qeth_card *card;
 
-	
+
 	if (it == SEQ_START_TOKEN)
 		return 0;
 
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index 882d419e416..185a9cfbcbd 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -785,7 +785,7 @@ qeth_dev_large_send_store(struct device *dev, struct device_attribute *attr, con
 	}
 	if (card->options.large_send == type)
 		return count;
-	if ((rc = qeth_set_large_send(card, type)))	
+	if ((rc = qeth_set_large_send(card, type)))
 		return rc;
 	return count;
 }
@@ -1682,7 +1682,7 @@ qeth_create_device_attributes(struct device *dev)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return sysfs_create_group(&dev->kobj,
 					  &qeth_osn_device_attr_group);
-   	
+
 	if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group)))
 		return ret;
 	if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group))){
@@ -1713,7 +1713,7 @@ qeth_remove_device_attributes(struct device *dev)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return sysfs_remove_group(&dev->kobj,
 					  &qeth_osn_device_attr_group);
-		      
+
 	sysfs_remove_group(&dev->kobj, &qeth_device_attr_group);
 	sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group);
 	sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group);
diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h
index 1286ddea450..24ef40ca956 100644
--- a/drivers/s390/net/qeth_tso.h
+++ b/drivers/s390/net/qeth_tso.h
@@ -117,11 +117,11 @@ __qeth_fill_buffer_frag(struct sk_buff *skb, struct qdio_buffer *buffer,
 	int fragno;
 	unsigned long addr;
 	int element, cnt, dlen;
-	
+
 	fragno = skb_shinfo(skb)->nr_frags;
 	element = *next_element_to_fill;
 	dlen = 0;
-	
+
 	if (is_tso)
 		buffer->element[element].flags =
 			SBAL_FLAGS_MIDDLE_FRAG;
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index 3bf46660351..f99e55308b3 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -13,6 +13,7 @@
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/workqueue.h>
+#include <linux/time.h>
 
 #include <asm/lowcore.h>
 
@@ -362,12 +363,19 @@ s390_revalidate_registers(struct mci *mci)
 	return kill_task;
 }
 
+#define MAX_IPD_COUNT	29
+#define MAX_IPD_TIME	(5 * 60 * USEC_PER_SEC) /* 5 minutes */
+
 /*
  * machine check handler.
  */
 void
 s390_do_machine_check(struct pt_regs *regs)
 {
+	static DEFINE_SPINLOCK(ipd_lock);
+	static unsigned long long last_ipd;
+	static int ipd_count;
+	unsigned long long tmp;
 	struct mci *mci;
 	struct mcck_struct *mcck;
 	int umode;
@@ -404,11 +412,27 @@ s390_do_machine_check(struct pt_regs *regs)
 				s390_handle_damage("processing backup machine "
 						   "check with damage.");
 			}
-			if (!umode)
-				s390_handle_damage("processing backup machine "
-						   "check in kernel mode.");
-			mcck->kill_task = 1;
-			mcck->mcck_code = *(unsigned long long *) mci;
+
+			/*
+			 * Nullifying exigent condition, therefore we might
+			 * retry this instruction.
+			 */
+
+			spin_lock(&ipd_lock);
+
+			tmp = get_clock();
+
+			if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME)
+				ipd_count++;
+			else
+				ipd_count = 1;
+
+			last_ipd = tmp;
+
+			if (ipd_count == MAX_IPD_COUNT)
+				s390_handle_damage("too many ipd retries.");
+
+			spin_unlock(&ipd_lock);
 		}
 		else {
 			/* Processing damage -> stopping machine */
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 383a95f34a0..239e108b8ed 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -392,13 +392,16 @@ static int openprom_bsd_ioctl(struct inode * inode, struct file * file,
 			return -ENOMEM;
 		}
 
-		prom_getproperty(op.op_nodeid, str, tmp, len);
-
-		tmp[len] = '\0';
+		cnt = prom_getproperty(op.op_nodeid, str, tmp, len);
+		if (cnt <= 0) {
+			error = -EINVAL;
+		} else {
+			tmp[len] = '\0';
 
-		if (__copy_to_user(argp, &op, sizeof(op)) != 0
-		    || copy_to_user(op.op_buf, tmp, len) != 0)
-			error = -EFAULT;
+			if (__copy_to_user(argp, &op, sizeof(op)) != 0 ||
+			    copy_to_user(op.op_buf, tmp, len) != 0)
+				error = -EFAULT;
+		}
 
 		kfree(tmp);
 		kfree(str);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 13ad88a064b..44728ae3fe7 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -446,7 +446,9 @@ config SCSI_DPT_I2O
 
 config SCSI_ADVANSYS
 	tristate "AdvanSys SCSI support"
-	depends on (ISA || EISA || PCI) && SCSI && BROKEN
+	depends on SCSI
+	depends on ISA || EISA || PCI
+	depends on BROKEN || X86_32
 	help
 	  This is a driver for all SCSI host adapters manufactured by
 	  AdvanSys. It is documented in the kernel source in
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 28b93057b60..2a419634b25 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2051,7 +2051,7 @@ STATIC ASC_DCNT  AscGetMaxDmaCount(ushort);
 #define ADV_VADDR_TO_U32   virt_to_bus
 #define ADV_U32_TO_VADDR   bus_to_virt
 
-#define AdvPortAddr  ulong              /* Virtual memory address size */
+#define AdvPortAddr  void __iomem *     /* Virtual memory address size */
 
 /*
  * Define Adv Library required memory access macros.
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index cb30d9c1153..0c9c2f400bf 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -219,6 +219,7 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ahc->flags |= AHC_39BIT_ADDRESSING;
 	} else {
 		if (dma_set_mask(dev, DMA_32BIT_MASK)) {
+			ahc_free(ahc);
 			printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n");
                 	return (-ENODEV);
 		}
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 02fed4a02eb..63cab2d7455 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -2042,12 +2042,12 @@ ahc_pci_resume(struct ahc_softc *ahc)
 	 * that the OS doesn't know about and rely on our chip
 	 * reset handler to handle the rest.
 	 */
-	ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4,
-			     ahc->bus_softc.pci_softc.devconfig);
-	ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1,
-			     ahc->bus_softc.pci_softc.command);
-	ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME, /*bytes*/1,
-			     ahc->bus_softc.pci_softc.csize_lattime);
+	ahc_pci_write_config(ahc->dev_softc, DEVCONFIG,
+			     ahc->bus_softc.pci_softc.devconfig, /*bytes*/4);
+	ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND,
+			     ahc->bus_softc.pci_softc.command, /*bytes*/1);
+	ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME,
+			     ahc->bus_softc.pci_softc.csize_lattime, /*bytes*/1);
 	if ((ahc->flags & AHC_HAS_TERM_LOGIC) != 0) {
 		struct	seeprom_descriptor sd;
 		u_int	sxfrctl1;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 12cb743d0ce..944fc1203eb 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -738,7 +738,8 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 {
 	struct viosrp_adapter_info *req;
 	struct srp_event_struct *evt_struct;
-	
+	dma_addr_t addr;
+
 	evt_struct = get_event_struct(&hostdata->pool);
 	if (!evt_struct) {
 		printk(KERN_ERR "ibmvscsi: couldn't allocate an event "
@@ -756,10 +757,10 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 	
 	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
 	req->common.length = sizeof(hostdata->madapter_info);
-	req->buffer = dma_map_single(hostdata->dev,
-				     &hostdata->madapter_info,
-				     sizeof(hostdata->madapter_info),
-				     DMA_BIDIRECTIONAL);
+	req->buffer = addr = dma_map_single(hostdata->dev,
+					    &hostdata->madapter_info,
+					    sizeof(hostdata->madapter_info),
+					    DMA_BIDIRECTIONAL);
 
 	if (dma_mapping_error(req->buffer)) {
 		printk(KERN_ERR
@@ -769,8 +770,13 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 		return;
 	}
 	
-	if (ibmvscsi_send_srp_event(evt_struct, hostdata))
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata)) {
 		printk(KERN_ERR "ibmvscsi: couldn't send ADAPTER_INFO_REQ!\n");
+		dma_unmap_single(hostdata->dev,
+				 addr,
+				 sizeof(hostdata->madapter_info),
+				 DMA_BIDIRECTIONAL);
+	}
 };
 
 /**
@@ -1258,6 +1264,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 {
 	struct viosrp_host_config *host_config;
 	struct srp_event_struct *evt_struct;
+	dma_addr_t addr;
 	int rc;
 
 	evt_struct = get_event_struct(&hostdata->pool);
@@ -1278,8 +1285,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 	memset(host_config, 0x00, sizeof(*host_config));
 	host_config->common.type = VIOSRP_HOST_CONFIG_TYPE;
 	host_config->common.length = length;
-	host_config->buffer = dma_map_single(hostdata->dev, buffer, length,
-					    DMA_BIDIRECTIONAL);
+	host_config->buffer = addr = dma_map_single(hostdata->dev, buffer,
+						    length,
+						    DMA_BIDIRECTIONAL);
 
 	if (dma_mapping_error(host_config->buffer)) {
 		printk(KERN_ERR
@@ -1290,11 +1298,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 
 	init_completion(&evt_struct->comp);
 	rc = ibmvscsi_send_srp_event(evt_struct, hostdata);
-	if (rc == 0) {
+	if (rc == 0)
 		wait_for_completion(&evt_struct->comp);
-		dma_unmap_single(hostdata->dev, host_config->buffer,
-				 length, DMA_BIDIRECTIONAL);
-	}
+	dma_unmap_single(hostdata->dev, addr, length, DMA_BIDIRECTIONAL);
 
 	return rc;
 }
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index bd147207f25..b046ffa2210 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -864,6 +864,9 @@ static unsigned int ata_id_xfermask(const u16 *id)
 /**
  *	ata_port_queue_task - Queue port_task
  *	@ap: The ata_port to queue port_task for
+ *	@fn: workqueue function to be scheduled
+ *	@data: data value to pass to workqueue function
+ *	@delay: delay time for workqueue function
  *
  *	Schedule @fn(@data) for execution after @delay jiffies using
  *	port_task.  There is one port_task per port and it's the
@@ -2739,6 +2742,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
  *	ata_dev_init_params - Issue INIT DEV PARAMS command
  *	@ap: Port associated with device @dev
  *	@dev: Device to which command will be sent
+ *	@heads: Number of heads (taskfile parameter)
+ *	@sectors: Number of sectors (taskfile parameter)
  *
  *	LOCKING:
  *	Kernel thread context (may sleep)
@@ -3638,6 +3643,8 @@ static void ata_pio_block(struct ata_port *ap)
 
 		ata_pio_sector(qc);
 	}
+
+	ata_altstatus(ap); /* flush */
 }
 
 static void ata_pio_error(struct ata_port *ap)
@@ -3754,11 +3761,14 @@ static void atapi_packet_task(void *_data)
 		spin_lock_irqsave(&ap->host_set->lock, flags);
 		ap->flags &= ~ATA_FLAG_NOINTR;
 		ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+		ata_altstatus(ap); /* flush */
+
 		if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
 			ap->ops->bmdma_start(qc);	/* initiate bmdma */
 		spin_unlock_irqrestore(&ap->host_set->lock, flags);
 	} else {
 		ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+		ata_altstatus(ap); /* flush */
 
 		/* PIO commands are handled by polling */
 		ap->hsm_task_state = HSM_ST;
@@ -4287,6 +4297,7 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
 int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
 {
 	if (ap->flags & ATA_FLAG_SUSPENDED) {
+		ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000);
 		ap->flags &= ~ATA_FLAG_SUSPENDED;
 		ata_set_mode(ap);
 	}
@@ -4302,6 +4313,7 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
  *	ata_device_suspend - prepare a device for suspend
  *	@ap: port the device is connected to
  *	@dev: the device to suspend
+ *	@state: target power management state
  *
  *	Flush the cache on the drive, if appropriate, then issue a
  *	standbynow command.
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index fad607b2e6f..ee22173fce4 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -27,7 +27,6 @@ void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-void lpfc_set_slim(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
 int lpfc_reg_login(struct lpfc_hba *, uint32_t, uint8_t *, LPFC_MBOXQ_t *,
 		   uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint32_t, LPFC_MBOXQ_t *);
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 8932b1be2b6..41cf5d3ea6c 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -113,6 +113,7 @@ struct lpfc_nodelist {
 #define NLP_NPR_ADISC      0x2000000	/* Issue ADISC when dq'ed from
 					   NPR list */
 #define NLP_DELAY_REMOVE   0x4000000	/* Defer removal till end of DSM */
+#define NLP_NODEV_REMOVE   0x8000000	/* Defer removal till discovery ends */
 
 /* Defines for list searchs */
 #define NLP_SEARCH_MAPPED    0x1	/* search mapped */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4813beaaca8..283b7d824c3 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -302,10 +302,6 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 	if (lpfc_reg_login(phba, Fabric_DID, (uint8_t *) sp, mbox, 0))
 		goto fail_free_mbox;
 
-	/*
-	 * set_slim mailbox command needs to execute first,
-	 * queue this command to be processed later.
-	 */
 	mbox->mbox_cmpl = lpfc_mbx_cmpl_fabric_reg_login;
 	mbox->context2 = ndlp;
 
@@ -781,25 +777,26 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 	if (disc && phba->num_disc_nodes) {
 		/* Check to see if there are more PLOGIs to be sent */
 		lpfc_more_plogi(phba);
-	}
 
-	if (phba->num_disc_nodes == 0) {
-		spin_lock_irq(phba->host->host_lock);
-		phba->fc_flag &= ~FC_NDISC_ACTIVE;
-		spin_unlock_irq(phba->host->host_lock);
+		if (phba->num_disc_nodes == 0) {
+			spin_lock_irq(phba->host->host_lock);
+			phba->fc_flag &= ~FC_NDISC_ACTIVE;
+			spin_unlock_irq(phba->host->host_lock);
 
-		lpfc_can_disctmo(phba);
-		if (phba->fc_flag & FC_RSCN_MODE) {
-			/* Check to see if more RSCNs came in while we were
-			 * processing this one.
-			 */
-			if ((phba->fc_rscn_id_cnt == 0) &&
-			    (!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
-				spin_lock_irq(phba->host->host_lock);
-				phba->fc_flag &= ~FC_RSCN_MODE;
-				spin_unlock_irq(phba->host->host_lock);
-			} else {
-				lpfc_els_handle_rscn(phba);
+			lpfc_can_disctmo(phba);
+			if (phba->fc_flag & FC_RSCN_MODE) {
+				/*
+				 * Check to see if more RSCNs came in while
+				 * we were processing this one.
+				 */
+				if ((phba->fc_rscn_id_cnt == 0) &&
+			    	(!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
+					spin_lock_irq(phba->host->host_lock);
+					phba->fc_flag &= ~FC_RSCN_MODE;
+					spin_unlock_irq(phba->host->host_lock);
+				} else {
+					lpfc_els_handle_rscn(phba);
+				}
 			}
 		}
 	}
@@ -1263,7 +1260,7 @@ lpfc_issue_els_logo(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp,
 	psli = &phba->sli;
 	pring = &psli->ring[LPFC_ELS_RING];
 
-	cmdsize = 2 * (sizeof (uint32_t) + sizeof (struct lpfc_name));
+	cmdsize = (2 * sizeof (uint32_t)) + sizeof (struct lpfc_name);
 	elsiocb = lpfc_prep_els_iocb(phba, 1, cmdsize, retry, ndlp,
 						ndlp->nlp_DID, ELS_CMD_LOGO);
 	if (!elsiocb)
@@ -1451,22 +1448,23 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_hba *phba, struct lpfc_nodelist * nlp)
 			 * PLOGIs to be sent
 			 */
 			lpfc_more_plogi(phba);
-		}
 
-		if (phba->num_disc_nodes == 0) {
-			phba->fc_flag &= ~FC_NDISC_ACTIVE;
-			lpfc_can_disctmo(phba);
-			if (phba->fc_flag & FC_RSCN_MODE) {
-				/* Check to see if more RSCNs
-				 * came in while we were
-				 * processing this one.
-				 */
-				if((phba->fc_rscn_id_cnt==0) &&
-				   (!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
-					phba->fc_flag &= ~FC_RSCN_MODE;
-				}
-				else {
-					lpfc_els_handle_rscn(phba);
+			if (phba->num_disc_nodes == 0) {
+				phba->fc_flag &= ~FC_NDISC_ACTIVE;
+				lpfc_can_disctmo(phba);
+				if (phba->fc_flag & FC_RSCN_MODE) {
+					/*
+					 * Check to see if more RSCNs
+					 * came in while we were
+					 * processing this one.
+					 */
+					if((phba->fc_rscn_id_cnt==0) &&
+					 !(phba->fc_flag & FC_RSCN_DISCOVERY)) {
+						phba->fc_flag &= ~FC_RSCN_MODE;
+					}
+					else {
+						lpfc_els_handle_rscn(phba);
+					}
 				}
 			}
 		}
@@ -1872,9 +1870,6 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 	if (mbox) {
 		if ((rspiocb->iocb.ulpStatus == 0)
 		    && (ndlp->nlp_flag & NLP_ACC_REGLOGIN)) {
-			/* set_slim mailbox command needs to execute first,
-			 * queue this command to be processed later.
-			 */
 			lpfc_unreg_rpi(phba, ndlp);
 			mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login;
 			mbox->context2 = ndlp;
@@ -1920,6 +1915,7 @@ lpfc_els_rsp_acc(struct lpfc_hba * phba, uint32_t flag,
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
+	ELS_PKT *els_pkt_ptr;
 
 	psli = &phba->sli;
 	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
@@ -1958,6 +1954,23 @@ lpfc_els_rsp_acc(struct lpfc_hba * phba, uint32_t flag,
 		pcmd += sizeof (uint32_t);
 		memcpy(pcmd, &phba->fc_sparam, sizeof (struct serv_parm));
 		break;
+	case ELS_CMD_PRLO:
+		cmdsize = sizeof (uint32_t) + sizeof (PRLO);
+		elsiocb = lpfc_prep_els_iocb(phba, 0, cmdsize, oldiocb->retry,
+					     ndlp, ndlp->nlp_DID, ELS_CMD_PRLO);
+		if (!elsiocb)
+			return 1;
+
+		icmd = &elsiocb->iocb;
+		icmd->ulpContext = oldcmd->ulpContext; /* Xri */
+		pcmd = (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
+
+		memcpy(pcmd, ((struct lpfc_dmabuf *) oldiocb->context2)->virt,
+		       sizeof (uint32_t) + sizeof (PRLO));
+		*((uint32_t *) (pcmd)) = ELS_CMD_PRLO_ACC;
+		els_pkt_ptr = (ELS_PKT *) pcmd;
+		els_pkt_ptr->un.prlo.acceptRspCode = PRLO_REQ_EXECUTED;
+		break;
 	default:
 		return 1;
 	}
@@ -2498,7 +2511,7 @@ lpfc_els_rcv_rscn(struct lpfc_hba * phba,
 	/* If we are about to begin discovery, just ACC the RSCN.
 	 * Discovery processing will satisfy it.
 	 */
-	if (phba->hba_state < LPFC_NS_QRY) {
+	if (phba->hba_state <= LPFC_NS_QRY) {
 		lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL,
 								newnode);
 		return 0;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 6721e679df6..adb086009ae 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -311,8 +311,8 @@ lpfc_workq_post_event(struct lpfc_hba * phba, void *arg1, void *arg2,
 	evtp->evt_arg2  = arg2;
 	evtp->evt       = evt;
 
-	list_add_tail(&evtp->evt_listp, &phba->work_list);
 	spin_lock_irq(phba->host->host_lock);
+	list_add_tail(&evtp->evt_listp, &phba->work_list);
 	if (phba->work_wait)
 		wake_up(phba->work_wait);
 	spin_unlock_irq(phba->host->host_lock);
@@ -1071,10 +1071,6 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
 	/* initialize static port data */
 	rport->maxframe_size = ndlp->nlp_maxframe;
 	rport->supported_classes = ndlp->nlp_class_sup;
-	if ((rport->scsi_target_id != -1) &&
-		(rport->scsi_target_id < MAX_FCP_TARGET)) {
-		ndlp->nlp_sid = rport->scsi_target_id;
-	}
 	rdata = rport->dd_data;
 	rdata->pnode = ndlp;
 
@@ -1087,6 +1083,10 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
 	if (rport_ids.roles !=  FC_RPORT_ROLE_UNKNOWN)
 		fc_remote_port_rolechg(rport, rport_ids.roles);
 
+	if ((rport->scsi_target_id != -1) &&
+		(rport->scsi_target_id < MAX_FCP_TARGET)) {
+		ndlp->nlp_sid = rport->scsi_target_id;
+	}
 
 	return;
 }
@@ -1238,6 +1238,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
 						evt_listp);
 
 		}
+		nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
 		nlp->nlp_type |= NLP_FC_NODE;
 		break;
 	case NLP_MAPPED_LIST:
@@ -1258,6 +1259,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
 						evt_listp);
 
 		}
+		nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
 		break;
 	case NLP_NPR_LIST:
 		nlp->nlp_flag |= list;
@@ -1402,6 +1404,8 @@ lpfc_check_sli_ndlp(struct lpfc_hba * phba,
 			if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
 				return 1;
 		case CMD_ELS_REQUEST64_CR:
+			if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
+				return 1;
 		case CMD_XMIT_ELS_RSP64_CX:
 			if (iocb->context1 == (uint8_t *) ndlp)
 				return 1;
@@ -1901,10 +1905,8 @@ lpfc_setup_disc_node(struct lpfc_hba * phba, uint32_t did)
 			 */
 			if (ndlp->nlp_flag & NLP_DELAY_TMO)
 				lpfc_cancel_retry_delay_tmo(phba, ndlp);
-		} else {
-			ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+		} else
 			ndlp = NULL;
-		}
 	} else {
 		flg = ndlp->nlp_flag & NLP_LIST_MASK;
 		if ((flg == NLP_ADISC_LIST) || (flg == NLP_PLOGI_LIST))
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 54d04188f7c..eedf9880136 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -449,6 +449,7 @@ struct serv_parm {	/* Structure is in Big Endian format */
 #define ELS_CMD_RRQ       0x12000000
 #define ELS_CMD_PRLI      0x20100014
 #define ELS_CMD_PRLO      0x21100014
+#define ELS_CMD_PRLO_ACC  0x02100014
 #define ELS_CMD_PDISC     0x50000000
 #define ELS_CMD_FDISC     0x51000000
 #define ELS_CMD_ADISC     0x52000000
@@ -484,6 +485,7 @@ struct serv_parm {	/* Structure is in Big Endian format */
 #define ELS_CMD_RRQ       0x12
 #define ELS_CMD_PRLI      0x14001020
 #define ELS_CMD_PRLO      0x14001021
+#define ELS_CMD_PRLO_ACC  0x14001002
 #define ELS_CMD_PDISC     0x50
 #define ELS_CMD_FDISC     0x51
 #define ELS_CMD_ADISC     0x52
@@ -1539,6 +1541,7 @@ typedef struct {
 
 #define FLAGS_TOPOLOGY_FAILOVER      0x0400	/* Bit 10 */
 #define FLAGS_LINK_SPEED             0x0800	/* Bit 11 */
+#define FLAGS_IMED_ABORT             0x04000	/* Bit 14 */
 
 	uint32_t link_speed;
 #define LINK_SPEED_AUTO 0       /* Auto selection */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 66d5d003555..908d0f27706 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -294,15 +294,6 @@ lpfc_config_port_post(struct lpfc_hba * phba)
 		}
 	}
 
-	/* This should turn on DELAYED ABTS for ELS timeouts */
-	lpfc_set_slim(phba, pmb, 0x052198, 0x1);
-	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
-		phba->hba_state = LPFC_HBA_ERROR;
-		mempool_free( pmb, phba->mbox_mem_pool);
-		return -EIO;
-	}
-
-
 	lpfc_read_config(phba, pmb);
 	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
 		lpfc_printf_log(phba,
@@ -804,7 +795,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
 		int    max_speed;
 		char * ports;
 		char * bus;
-	} m;
+	} m = {"<Unknown>", 0, "", ""};
 
 	pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
 	ports = (hdrtype == 0x80) ? "2-port " : "";
@@ -1627,7 +1618,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 	error = lpfc_alloc_sysfs_attr(phba);
 	if (error)
-		goto out_kthread_stop;
+		goto out_remove_host;
 
 	error =	request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ,
 							LPFC_DRIVER_NAME, phba);
@@ -1644,8 +1635,10 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
 
 	error = lpfc_sli_hba_setup(phba);
-	if (error)
+	if (error) {
+		error = -ENODEV;
 		goto out_free_irq;
+	}
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
 		spin_lock_irq(phba->host->host_lock);
@@ -1700,6 +1693,9 @@ out_free_irq:
 	free_irq(phba->pcidev->irq, phba);
 out_free_sysfs_attr:
 	lpfc_free_sysfs_attr(phba);
+out_remove_host:
+	fc_remove_host(phba->host);
+	scsi_remove_host(phba->host);
 out_kthread_stop:
 	kthread_stop(phba->worker_thread);
 out_free_iocbq:
@@ -1721,12 +1717,14 @@ out_iounmap_slim:
 out_idr_remove:
 	idr_remove(&lpfc_hba_index, phba->brd_no);
 out_put_host:
+	phba->host = NULL;
 	scsi_host_put(host);
 out_release_regions:
 	pci_release_regions(pdev);
 out_disable_device:
 	pci_disable_device(pdev);
 out:
+	pci_set_drvdata(pdev, NULL);
 	return error;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index c585e2b2e58..e42f22aaf71 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -200,6 +200,9 @@ lpfc_init_link(struct lpfc_hba * phba,
 		break;
 	}
 
+	/* Enable asynchronous ABTS responses from firmware */
+	mb->un.varInitLnk.link_flags |= FLAGS_IMED_ABORT;
+
 	/* NEW_FEATURE
 	 * Setting up the link speed
 	 */
@@ -292,36 +295,6 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint32_t did, LPFC_MBOXQ_t * pmb)
 	return;
 }
 
-/***********************************************/
-
-/*                  command to write slim      */
-/***********************************************/
-void
-lpfc_set_slim(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t addr,
-	      uint32_t value)
-{
-	MAILBOX_t *mb;
-
-	mb = &pmb->mb;
-	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
-
-	/* addr = 0x090597 is AUTO ABTS disable for ELS commands */
-	/* addr = 0x052198 is DELAYED ABTS enable for ELS commands */
-
-	/*
-	 * Always turn on DELAYED ABTS for ELS timeouts
-	 */
-	if ((addr == 0x052198) && (value == 0))
-		value = 1;
-
-	mb->un.varWords[0] = addr;
-	mb->un.varWords[1] = value;
-
-	mb->mbxCommand = MBX_SET_SLIM;
-	mb->mbxOwner = OWN_HOST;
-	return;
-}
-
 /**********************************************/
 /*  lpfc_read_nv  Issue a READ CONFIG         */
 /*                mailbox command             */
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 3d77bd999b7..27d60ad897c 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -465,14 +465,18 @@ lpfc_rcv_padisc(struct lpfc_hba * phba,
 static int
 lpfc_rcv_logo(struct lpfc_hba * phba,
 		      struct lpfc_nodelist * ndlp,
-		      struct lpfc_iocbq *cmdiocb)
+		      struct lpfc_iocbq *cmdiocb,
+		      uint32_t els_cmd)
 {
 	/* Put ndlp on NPR list with 1 sec timeout for plogi, ACC logo */
 	/* Only call LOGO ACC for first LOGO, this avoids sending unnecessary
 	 * PLOGIs during LOGO storms from a device.
 	 */
 	ndlp->nlp_flag |= NLP_LOGO_ACC;
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	if (els_cmd == ELS_CMD_PRLO)
+		lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
+	else
+		lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
 
 	if (!(ndlp->nlp_type & NLP_FABRIC) ||
 		(ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
@@ -681,7 +685,7 @@ lpfc_rcv_logo_plogi_issue(struct lpfc_hba * phba,
 	/* software abort outstanding PLOGI */
 	lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -788,10 +792,6 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_hba * phba,
 	if (lpfc_reg_login
 	    (phba, irsp->un.elsreq64.remoteID,
 	     (uint8_t *) sp, mbox, 0) == 0) {
-		/* set_slim mailbox command needs to
-		 * execute first, queue this command to
-		 * be processed later.
-		 */
 		switch (ndlp->nlp_DID) {
 		case NameServer_DID:
 			mbox->mbox_cmpl =
@@ -832,11 +832,17 @@ static uint32_t
 lpfc_device_rm_plogi_issue(struct lpfc_hba * phba,
 			   struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
-	/* software abort outstanding PLOGI */
-	lpfc_els_abort(phba, ndlp, 1);
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		/* software abort outstanding PLOGI */
+		lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 static uint32_t
@@ -851,7 +857,7 @@ lpfc_device_recov_plogi_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 
 	return ndlp->nlp_state;
@@ -905,7 +911,7 @@ lpfc_rcv_logo_adisc_issue(struct lpfc_hba * phba,
 	/* software abort outstanding ADISC */
 	lpfc_els_abort(phba, ndlp, 0);
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -932,7 +938,7 @@ lpfc_rcv_prlo_adisc_issue(struct lpfc_hba * phba,
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
 	/* Treat like rcv logo */
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_PRLO);
 	return ndlp->nlp_state;
 }
 
@@ -987,11 +993,17 @@ lpfc_device_rm_adisc_issue(struct lpfc_hba * phba,
 			    struct lpfc_nodelist * ndlp, void *arg,
 			    uint32_t evt)
 {
-	/* software abort outstanding ADISC */
-	lpfc_els_abort(phba, ndlp, 1);
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		/* software abort outstanding ADISC */
+		lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 static uint32_t
@@ -1006,7 +1018,7 @@ lpfc_device_recov_adisc_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	ndlp->nlp_flag |= NLP_NPR_ADISC;
 	spin_unlock_irq(phba->host->host_lock);
 
@@ -1048,7 +1060,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1073,7 +1085,7 @@ lpfc_rcv_prlo_reglogin_issue(struct lpfc_hba * phba,
 	struct lpfc_iocbq *cmdiocb;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
 	return ndlp->nlp_state;
 }
 
@@ -1133,8 +1145,14 @@ lpfc_device_rm_reglogin_issue(struct lpfc_hba * phba,
 			      struct lpfc_nodelist * ndlp, void *arg,
 			      uint32_t evt)
 {
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 static uint32_t
@@ -1146,7 +1164,7 @@ lpfc_device_recov_reglogin_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	return ndlp->nlp_state;
 }
@@ -1186,7 +1204,7 @@ lpfc_rcv_logo_prli_issue(struct lpfc_hba * phba,
 	/* Software abort outstanding PRLI before sending acc */
 	lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1214,7 +1232,7 @@ lpfc_rcv_prlo_prli_issue(struct lpfc_hba * phba,
 	struct lpfc_iocbq *cmdiocb;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
 	return ndlp->nlp_state;
 }
 
@@ -1278,11 +1296,17 @@ static uint32_t
 lpfc_device_rm_prli_issue(struct lpfc_hba * phba,
 			  struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
-	/* software abort outstanding PRLI */
-	lpfc_els_abort(phba, ndlp, 1);
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		/* software abort outstanding PLOGI */
+		lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 
@@ -1313,7 +1337,7 @@ lpfc_device_recov_prli_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	return ndlp->nlp_state;
 }
@@ -1351,7 +1375,7 @@ lpfc_rcv_logo_unmap_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1375,7 +1399,7 @@ lpfc_rcv_prlo_unmap_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
 	return ndlp->nlp_state;
 }
 
@@ -1386,7 +1410,7 @@ lpfc_device_recov_unmap_node(struct lpfc_hba * phba,
 	ndlp->nlp_prev_state = NLP_STE_UNMAPPED_NODE;
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	lpfc_disc_set_adisc(phba, ndlp);
 
 	return ndlp->nlp_state;
@@ -1424,7 +1448,7 @@ lpfc_rcv_logo_mapped_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1456,7 +1480,7 @@ lpfc_rcv_prlo_mapped_node(struct lpfc_hba * phba,
 	spin_unlock_irq(phba->host->host_lock);
 
 	/* Treat like rcv logo */
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_PRLO);
 	return ndlp->nlp_state;
 }
 
@@ -1469,7 +1493,7 @@ lpfc_device_recov_mapped_node(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	lpfc_disc_set_adisc(phba, ndlp);
 	return ndlp->nlp_state;
@@ -1551,7 +1575,7 @@ lpfc_rcv_logo_npr_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1617,9 +1641,16 @@ lpfc_cmpl_plogi_npr_node(struct lpfc_hba * phba,
 			  struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
+	IOCB_t *irsp;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
+
+	irsp = &rspiocb->iocb;
+	if (irsp->ulpStatus) {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1628,9 +1659,16 @@ lpfc_cmpl_prli_npr_node(struct lpfc_hba * phba,
 			  struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
+	IOCB_t *irsp;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
+
+	irsp = &rspiocb->iocb;
+	if (irsp->ulpStatus && (ndlp->nlp_flag & NLP_NODEV_REMOVE)) {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1649,9 +1687,16 @@ lpfc_cmpl_adisc_npr_node(struct lpfc_hba * phba,
 			    uint32_t evt)
 {
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
+	IOCB_t *irsp;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
+
+	irsp = &rspiocb->iocb;
+	if (irsp->ulpStatus && (ndlp->nlp_flag & NLP_NODEV_REMOVE)) {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1668,7 +1713,12 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_hba * phba,
 
 	if (!mb->mbxStatus)
 		ndlp->nlp_rpi = mb->un.varWords[0];
-
+	else {
+		if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+			return NLP_STE_FREED_NODE;
+		}
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1677,6 +1727,10 @@ lpfc_device_rm_npr_node(struct lpfc_hba * phba,
 			    struct lpfc_nodelist * ndlp, void *arg,
 			    uint32_t evt)
 {
+	if (ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
 	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 	return NLP_STE_FREED_NODE;
 }
@@ -1687,7 +1741,7 @@ lpfc_device_recov_npr_node(struct lpfc_hba * phba,
 			    uint32_t evt)
 {
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	if (ndlp->nlp_flag & NLP_DELAY_TMO) {
 		lpfc_cancel_retry_delay_tmo(phba, ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index f9379987372..7dc4c2e6bed 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -629,8 +629,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
 	struct lpfc_iocbq *piocbq;
 	IOCB_t *piocb;
 	struct fcp_cmnd *fcp_cmnd;
-	struct scsi_device *scsi_dev = lpfc_cmd->pCmd->device;
-	struct lpfc_rport_data *rdata = scsi_dev->hostdata;
+	struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
 	struct lpfc_nodelist *ndlp = rdata->pnode;
 
 	if ((ndlp == NULL) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
@@ -665,56 +664,18 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
 		piocb->ulpTimeout = lpfc_cmd->timeout;
 	}
 
-	lpfc_cmd->rdata = rdata;
-
-	switch (task_mgmt_cmd) {
-	case FCP_LUN_RESET:
-		/* Issue LUN Reset to TGT <num> LUN <num> */
-		lpfc_printf_log(phba,
-				KERN_INFO,
-				LOG_FCP,
-				"%d:0703 Issue LUN Reset to TGT %d LUN %d "
-				"Data: x%x x%x\n",
-				phba->brd_no,
-				scsi_dev->id, scsi_dev->lun,
-				ndlp->nlp_rpi, ndlp->nlp_flag);
-
-		break;
-	case FCP_ABORT_TASK_SET:
-		/* Issue Abort Task Set to TGT <num> LUN <num> */
-		lpfc_printf_log(phba,
-				KERN_INFO,
-				LOG_FCP,
-				"%d:0701 Issue Abort Task Set to TGT %d LUN %d "
-				"Data: x%x x%x\n",
-				phba->brd_no,
-				scsi_dev->id, scsi_dev->lun,
-				ndlp->nlp_rpi, ndlp->nlp_flag);
-
-		break;
-	case FCP_TARGET_RESET:
-		/* Issue Target Reset to TGT <num> */
-		lpfc_printf_log(phba,
-				KERN_INFO,
-				LOG_FCP,
-				"%d:0702 Issue Target Reset to TGT %d "
-				"Data: x%x x%x\n",
-				phba->brd_no,
-				scsi_dev->id, ndlp->nlp_rpi,
-				ndlp->nlp_flag);
-		break;
-	}
-
 	return (1);
 }
 
 static int
-lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
+lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba,
+		    unsigned  tgt_id, struct lpfc_rport_data *rdata)
 {
 	struct lpfc_iocbq *iocbq;
 	struct lpfc_iocbq *iocbqrsp;
 	int ret;
 
+	lpfc_cmd->rdata = rdata;
 	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);
 	if (!ret)
 		return FAILED;
@@ -726,6 +687,13 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
 	if (!iocbqrsp)
 		return FAILED;
 
+	/* Issue Target Reset to TGT <num> */
+	lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
+			"%d:0702 Issue Target Reset to TGT %d "
+			"Data: x%x x%x\n",
+			phba->brd_no, tgt_id, rdata->pnode->nlp_rpi,
+			rdata->pnode->nlp_flag);
+
 	ret = lpfc_sli_issue_iocb_wait(phba,
 				       &phba->sli.ring[phba->sli.fcp_ring],
 				       iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -1021,6 +989,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	lpfc_cmd->pCmd = cmnd;
 	lpfc_cmd->timeout = 60;
 	lpfc_cmd->scsi_hba = phba;
+	lpfc_cmd->rdata = rdata;
 
 	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET);
 	if (!ret)
@@ -1033,6 +1002,11 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	if (iocbqrsp == NULL)
 		goto out_free_scsi_buf;
 
+	lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
+			"%d:0703 Issue LUN Reset to TGT %d LUN %d "
+			"Data: x%x x%x\n", phba->brd_no, cmnd->device->id,
+			cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
+
 	ret = lpfc_sli_issue_iocb_wait(phba,
 				       &phba->sli.ring[phba->sli.fcp_ring],
 				       iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -1104,7 +1078,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	int match;
 	int ret = FAILED, i, err_count = 0;
 	int cnt, loopcnt;
-	unsigned int midlayer_id = 0;
 	struct lpfc_scsi_buf * lpfc_cmd;
 
 	lpfc_block_requests(phba);
@@ -1124,7 +1097,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	 * targets known to the driver.  Should any target reset
 	 * fail, this routine returns failure to the midlayer.
 	 */
-	midlayer_id = cmnd->device->id;
 	for (i = 0; i < MAX_FCP_TARGET; i++) {
 		/* Search the mapped list for this target ID */
 		match = 0;
@@ -1137,9 +1109,8 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 		if (!match)
 			continue;
 
-		lpfc_cmd->pCmd->device->id = i;
-		lpfc_cmd->pCmd->device->hostdata = ndlp->rport->dd_data;
-		ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba);
+		ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba,
+					  i, ndlp->rport->dd_data);
 		if (ret != SUCCESS) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
 				"%d:0713 Bus Reset on target %d failed\n",
@@ -1158,7 +1129,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	 * the targets.  Unfortunately, some targets do not abide by
 	 * this forcing the driver to double check.
 	 */
-	cmnd->device->id = midlayer_id;
 	cnt = lpfc_sli_sum_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
 				0, 0, LPFC_CTX_HOST);
 	if (cnt)
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 4cf1366108b..6b737568b83 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.1.4"
+#define LPFC_DRIVER_VERSION "8.1.6"
 
 #define LPFC_DRIVER_NAME "lpfc"
 
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index d245717fee6..c33857e7b33 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4471,7 +4471,6 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
 {
 	Scsi_Cmnd	*scmd;
 	struct	scsi_device *sdev;
-	unsigned long	flags = 0;
 	scb_t	*scb;
 	int	rval;
 
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index c11e5ce6865..bec1424eda8 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mbox.c
- * Version	: v2.20.4.7 (Nov 14 2005)
+ * Version	: v2.20.4.8 (Apr 11 2006)
  *
  * Authors:
  * 	Atul Mukker		<Atul.Mukker@lsil.com>
@@ -2278,6 +2278,7 @@ megaraid_mbox_dpc(unsigned long devp)
 	unsigned long		flags;
 	uint8_t			c;
 	int			status;
+	uioc_t			*kioc;
 
 
 	if (!adapter) return;
@@ -2320,6 +2321,9 @@ megaraid_mbox_dpc(unsigned long devp)
 			// remove from local clist
 			list_del_init(&scb->list);
 
+			kioc			= (uioc_t *)scb->gp;
+			kioc->status		= 0;
+
 			megaraid_mbox_mm_done(adapter, scb);
 
 			continue;
@@ -2636,6 +2640,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 	int		recovery_window;
 	int		recovering;
 	int		i;
+	uioc_t		*kioc;
 
 	adapter		= SCP2ADAPTER(scp);
 	raid_dev	= ADAP2RAIDDEV(adapter);
@@ -2655,32 +2660,51 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 	// Also, reset all the commands currently owned by the driver
 	spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
 	list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
-
 		list_del_init(&scb->list);	// from pending list
 
-		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: %ld:%d[%d:%d], reset from pending list\n",
-				scp->serial_number, scb->sno,
-				scb->dev_channel, scb->dev_target));
+		if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
+			con_log(CL_ANN, (KERN_WARNING
+			"megaraid: IOCTL packet with %d[%d:%d] being reset\n",
+			scb->sno, scb->dev_channel, scb->dev_target));
 
-		scp->result = (DID_RESET << 16);
-		scp->scsi_done(scp);
+			scb->status = -1;
 
-		megaraid_dealloc_scb(adapter, scb);
+			kioc			= (uioc_t *)scb->gp;
+			kioc->status		= -EFAULT;
+
+			megaraid_mbox_mm_done(adapter, scb);
+		} else {
+			if (scb->scp == scp) {	// Found command
+				con_log(CL_ANN, (KERN_WARNING
+					"megaraid: %ld:%d[%d:%d], reset from pending list\n",
+					scp->serial_number, scb->sno,
+					scb->dev_channel, scb->dev_target));
+			} else {
+				con_log(CL_ANN, (KERN_WARNING
+				"megaraid: IO packet with %d[%d:%d] being reset\n",
+				scb->sno, scb->dev_channel, scb->dev_target));
+			}
+
+			scb->scp->result = (DID_RESET << 16);
+			scb->scp->scsi_done(scb->scp);
+
+			megaraid_dealloc_scb(adapter, scb);
+		}
 	}
 	spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
 
 	if (adapter->outstanding_cmds) {
 		con_log(CL_ANN, (KERN_NOTICE
 			"megaraid: %d outstanding commands. Max wait %d sec\n",
-			adapter->outstanding_cmds, MBOX_RESET_WAIT));
+			adapter->outstanding_cmds,
+			(MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT)));
 	}
 
 	recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
 
 	recovering = adapter->outstanding_cmds;
 
-	for (i = 0; i < recovery_window && adapter->outstanding_cmds; i++) {
+	for (i = 0; i < recovery_window; i++) {
 
 		megaraid_ack_sequence(adapter);
 
@@ -2689,12 +2713,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 			con_log(CL_ANN, (
 			"megaraid mbox: Wait for %d commands to complete:%d\n",
 				adapter->outstanding_cmds,
-				MBOX_RESET_WAIT - i));
+				(MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
 		}
 
 		// bailout if no recovery happended in reset time
-		if ((i == MBOX_RESET_WAIT) &&
-			(recovering == adapter->outstanding_cmds)) {
+		if (adapter->outstanding_cmds == 0) {
 			break;
 		}
 
@@ -2918,12 +2941,13 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
 	wmb();
 	WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
 
-	for (i = 0; i < 0xFFFFF; i++) {
+	for (i = 0; i < MBOX_SYNC_WAIT_CNT; i++) {
 		if (mbox->numstatus != 0xFF) break;
 		rmb();
+		udelay(MBOX_SYNC_DELAY_200);
 	}
 
-	if (i == 0xFFFFF) {
+	if (i == MBOX_SYNC_WAIT_CNT) {
 		// We may need to re-calibrate the counter
 		con_log(CL_ANN, (KERN_CRIT
 			"megaraid: fast sync command timed out\n"));
@@ -3475,7 +3499,7 @@ megaraid_cmm_register(adapter_t *adapter)
 	adp.drvr_data		= (unsigned long)adapter;
 	adp.pdev		= adapter->pdev;
 	adp.issue_uioc		= megaraid_mbox_mm_handler;
-	adp.timeout		= 300;
+	adp.timeout		= MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
 	adp.max_kioc		= MBOX_MAX_USER_CMDS;
 
 	if ((rval = mraid_mm_register_adp(&adp)) != 0) {
@@ -3702,7 +3726,6 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
 	unsigned long		flags;
 
 	kioc			= (uioc_t *)scb->gp;
-	kioc->status		= 0;
 	mbox64			= (mbox64_t *)(unsigned long)kioc->cmdbuf;
 	mbox64->mbox32.status	= scb->status;
 	raw_mbox		= (uint8_t *)&mbox64->mbox32;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 882fb1a0b57..868fb0ec93e 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -21,8 +21,8 @@
 #include "megaraid_ioctl.h"
 
 
-#define MEGARAID_VERSION	"2.20.4.7"
-#define MEGARAID_EXT_VERSION	"(Release Date: Mon Nov 14 12:27:22 EST 2005)"
+#define MEGARAID_VERSION	"2.20.4.8"
+#define MEGARAID_EXT_VERSION	"(Release Date: Mon Apr 11 12:27:22 EST 2006)"
 
 
 /*
@@ -100,6 +100,9 @@
 #define MBOX_BUSY_WAIT		10	// max usec to wait for busy mailbox
 #define MBOX_RESET_WAIT		180	// wait these many seconds in reset
 #define MBOX_RESET_EXT_WAIT	120	// extended wait reset
+#define MBOX_SYNC_WAIT_CNT	0xFFFF	// wait loop index for synchronous mode
+
+#define MBOX_SYNC_DELAY_200	200	// 200 micro-seconds
 
 /*
  * maximum transfer that can happen through the firmware commands issued
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index 8f3ce043229..e8f534fb336 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -898,10 +898,8 @@ mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
 
 	adapter = kmalloc(sizeof(mraid_mmadp_t), GFP_KERNEL);
 
-	if (!adapter) {
-		rval = -ENOMEM;
-		goto memalloc_error;
-	}
+	if (!adapter)
+		return -ENOMEM;
 
 	memset(adapter, 0, sizeof(mraid_mmadp_t));
 
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index fee843fab1c..108910f512e 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -982,6 +982,12 @@ static int device_check(ppa_struct *dev)
 	return -ENODEV;
 }
 
+static int ppa_adjust_queue(struct scsi_device *device)
+{
+	blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
+	return 0;
+}
+
 static struct scsi_host_template ppa_template = {
 	.module			= THIS_MODULE,
 	.proc_name		= "ppa",
@@ -997,6 +1003,7 @@ static struct scsi_host_template ppa_template = {
 	.cmd_per_lun		= 1,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.can_queue		= 1,
+	.slave_alloc		= ppa_adjust_queue,
 };
 
 /***************************************************************************
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1052528c310..ccaad0b08d3 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -589,6 +589,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
 *    Either SUCCESS or FAILED.
 *
 * Note:
+*    Only return FAILED if command not returned by firmware.
 **************************************************************************/
 int
 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
@@ -599,11 +600,12 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	unsigned int id, lun;
 	unsigned long serial;
 	unsigned long flags;
+	int wait = 0;
 
 	if (!CMD_SP(cmd))
-		return FAILED;
+		return SUCCESS;
 
-	ret = FAILED;
+	ret = SUCCESS;
 
 	id = cmd->device->id;
 	lun = cmd->device->lun;
@@ -631,7 +633,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		} else {
 			DEBUG3(printk("%s(%ld): abort_command "
 			    "mbx success.\n", __func__, ha->host_no));
-			ret = SUCCESS;
+			wait = 1;
 		}
 		spin_lock_irqsave(&ha->hardware_lock, flags);
 
@@ -640,17 +642,18 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Wait for the command to be returned. */
-	if (ret == SUCCESS) {
+	if (wait) {
 		if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
 			qla_printk(KERN_ERR, ha,
 			    "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 			    "%x.\n", ha->host_no, id, lun, serial, ret);
+			ret = FAILED;
 		}
 	}
 
 	qla_printk(KERN_INFO, ha,
-	    "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
-	    id, lun, serial, ret);
+	    "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
+	    ha->host_no, id, lun, wait, serial, ret);
 
 	return ret;
 }
@@ -1687,8 +1690,8 @@ qla2x00_free_device(scsi_qla_host_t *ha)
 	ha->flags.online = 0;
 
 	/* Detach interrupts */
-	if (ha->pdev->irq)
-		free_irq(ha->pdev->irq, ha);
+	if (ha->host->irq)
+		free_irq(ha->host->irq, ha);
 
 	/* release io space registers  */
 	if (ha->iobase)
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index d5fdcb9a884..9b8bca1ac1f 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.6"
+#define DRV_VERSION	"0.7"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -50,6 +50,12 @@ enum {
 
 	MV_PCI_REG_BASE		= 0,
 	MV_IRQ_COAL_REG_BASE	= 0x18000,	/* 6xxx part only */
+	MV_IRQ_COAL_CAUSE		= (MV_IRQ_COAL_REG_BASE + 0x08),
+	MV_IRQ_COAL_CAUSE_LO		= (MV_IRQ_COAL_REG_BASE + 0x88),
+	MV_IRQ_COAL_CAUSE_HI		= (MV_IRQ_COAL_REG_BASE + 0x8c),
+	MV_IRQ_COAL_THRESHOLD		= (MV_IRQ_COAL_REG_BASE + 0xcc),
+	MV_IRQ_COAL_TIME_THRESHOLD	= (MV_IRQ_COAL_REG_BASE + 0xd0),
+
 	MV_SATAHC0_REG_BASE	= 0x20000,
 	MV_FLASH_CTL		= 0x1046c,
 	MV_GPIO_PORT_CTL	= 0x104f0,
@@ -302,9 +308,6 @@ struct mv_port_priv {
 	dma_addr_t		crpb_dma;
 	struct mv_sg		*sg_tbl;
 	dma_addr_t		sg_tbl_dma;
-
-	unsigned		req_producer;		/* cp of req_in_ptr */
-	unsigned		rsp_consumer;		/* cp of rsp_out_ptr */
 	u32			pp_flags;
 };
 
@@ -937,8 +940,6 @@ static int mv_port_start(struct ata_port *ap)
 	writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
 		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
-	pp->req_producer = pp->rsp_consumer = 0;
-
 	/* Don't turn on EDMA here...do it before DMA commands only.  Else
 	 * we'll be unable to send non-data, PIO, etc due to restricted access
 	 * to shadow regs.
@@ -1022,16 +1023,16 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
 	}
 }
 
-static inline unsigned mv_inc_q_index(unsigned *index)
+static inline unsigned mv_inc_q_index(unsigned index)
 {
-	*index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
-	return *index;
+	return (index + 1) & MV_MAX_Q_DEPTH_MASK;
 }
 
 static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
 {
-	*cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+	u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
 		(last ? CRQB_CMD_LAST : 0);
+	*cmdw = cpu_to_le16(tmp);
 }
 
 /**
@@ -1053,15 +1054,11 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	u16 *cw;
 	struct ata_taskfile *tf;
 	u16 flags = 0;
+	unsigned in_index;
 
  	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1069,13 +1066,17 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 
-	pp->crqb[pp->req_producer].sg_addr =
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	pp->crqb[in_index].sg_addr =
 		cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
-	pp->crqb[pp->req_producer].sg_addr_hi =
+	pp->crqb[in_index].sg_addr_hi =
 		cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
-	pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+	pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
 
-	cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+	cw = &pp->crqb[in_index].ata_cmd[0];
 	tf = &qc->tf;
 
 	/* Sadly, the CRQB cannot accomodate all registers--there are
@@ -1144,16 +1145,12 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	struct mv_port_priv *pp = ap->private_data;
 	struct mv_crqb_iie *crqb;
 	struct ata_taskfile *tf;
+	unsigned in_index;
 	u32 flags = 0;
 
  	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in Gen IIE command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1162,7 +1159,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 
-	crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
 	crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
 	crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
 	crqb->flags = cpu_to_le32(flags);
@@ -1210,6 +1211,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 {
 	void __iomem *port_mmio = mv_ap_base(qc->ap);
 	struct mv_port_priv *pp = qc->ap->private_data;
+	unsigned in_index;
 	u32 in_ptr;
 
 	if (ATA_PROT_DMA != qc->tf.protocol) {
@@ -1221,23 +1223,20 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 		return ata_qc_issue_prot(qc);
 	}
 
-	in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_ptr   = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
 	/* until we do queuing, the queue should be empty at this point */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+	WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+		>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
-	mv_inc_q_index(&pp->req_producer);	/* now incr producer index */
+	in_index = mv_inc_q_index(in_index);	/* now incr producer index */
 
 	mv_start_dma(port_mmio, pp);
 
 	/* and write the request in pointer to kick the EDMA to life */
 	in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
-	in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+	in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
 	writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
 	return 0;
@@ -1260,28 +1259,26 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
+	unsigned out_index;
 	u32 out_ptr;
 	u8 ata_status;
 
-	out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_ptr   = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-	/* the response consumer index should be the same as we remember it */
-	WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
-
-	ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+	ata_status = le16_to_cpu(pp->crpb[out_index].flags)
+					>> CRPB_FLAG_STATUS_SHIFT;
 
 	/* increment our consumer index... */
-	pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+	out_index = mv_inc_q_index(out_index);
 
 	/* and, until we do NCQ, there should only be 1 CRPB waiting */
-	WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
-		  EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
+	WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+		>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
 	/* write out our inc'd consumer index so EDMA knows we're caught up */
 	out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
-	out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+	out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
 	writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
 	/* Return ATA status register for completed CRPB */
@@ -1291,6 +1288,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 /**
  *      mv_err_intr - Handle error interrupts on the port
  *      @ap: ATA channel to manipulate
+ *      @reset_allowed: bool: 0 == don't trigger from reset here
  *
  *      In most cases, just clear the interrupt and move on.  However,
  *      some cases require an eDMA reset, which is done right before
@@ -1301,7 +1299,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_err_intr(struct ata_port *ap)
+static void mv_err_intr(struct ata_port *ap, int reset_allowed)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	u32 edma_err_cause, serr = 0;
@@ -1323,9 +1321,8 @@ static void mv_err_intr(struct ata_port *ap)
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
 	/* check for fatal here and recover if needed */
-	if (EDMA_ERR_FATAL & edma_err_cause) {
+	if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
 		mv_stop_and_reset(ap);
-	}
 }
 
 /**
@@ -1374,12 +1371,12 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 		struct ata_port *ap = host_set->ports[port];
 		struct mv_port_priv *pp = ap->private_data;
 
-		hard_port = port & MV_PORT_MASK;	/* range 0-3 */
+		hard_port = mv_hardport_from_port(port); /* range 0..3 */
 		handled = 0;	/* ensure ata_status is set if handled++ */
 
 		/* Note that DEV_IRQ might happen spuriously during EDMA,
-		 * and should be ignored in such cases.  We could mask it,
-		 * but it's pretty rare and may not be worth the overhead.
+		 * and should be ignored in such cases.
+		 * The cause of this is still under investigation.
 		 */ 
 		if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 			/* EDMA: check for response queue interrupt */
@@ -1393,6 +1390,11 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 				ata_status = readb((void __iomem *)
 					   ap->ioaddr.status_addr);
 				handled = 1;
+				/* ignore spurious intr if drive still BUSY */
+				if (ata_status & ATA_BUSY) {
+					ata_status = 0;
+					handled = 0;
+				}
 			}
 		}
 
@@ -1406,7 +1408,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 			shift++;	/* skip bit 8 in the HC Main IRQ reg */
 		}
 		if ((PORT0_ERR << shift) & relevant) {
-			mv_err_intr(ap);
+			mv_err_intr(ap, 1);
 			err_mask |= AC_ERR_OTHER;
 			handled = 1;
 		}
@@ -1448,6 +1450,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
 	struct ata_host_set *host_set = dev_instance;
 	unsigned int hc, handled = 0, n_hcs;
 	void __iomem *mmio = host_set->mmio_base;
+	struct mv_host_priv *hpriv;
 	u32 irq_stat;
 
 	irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
@@ -1469,6 +1472,17 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
 			handled++;
 		}
 	}
+
+	hpriv = host_set->private_data;
+	if (IS_60XX(hpriv)) {
+		/* deal with the interrupt coalescing bits */
+		if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+		}
+	}
+
 	if (PCI_ERR & irq_stat) {
 		printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
 		       readl(mmio + PCI_IRQ_CAUSE_OFS));
@@ -1867,7 +1881,8 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
 
 	if (IS_60XX(hpriv)) {
 		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-		ifctl |= (1 << 12) | (1 << 7);
+		ifctl |= (1 << 7);		/* enable gen2i speed */
+		ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 		writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 	}
 
@@ -2031,11 +2046,14 @@ static void mv_eng_timeout(struct ata_port *ap)
 	       ap->host_set->mmio_base, ap, qc, qc->scsicmd,
 	       &qc->scsicmd->cmnd);
 
-	mv_err_intr(ap);
+	mv_err_intr(ap, 0);
 	mv_stop_and_reset(ap);
 
-	qc->err_mask |= AC_ERR_TIMEOUT;
-	ata_eh_qc_complete(qc);
+	WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+	if (qc->flags & ATA_QCFLAG_ACTIVE) {
+		qc->err_mask |= AC_ERR_TIMEOUT;
+		ata_eh_qc_complete(qc);
+	}
 }
 
 /**
@@ -2229,7 +2247,8 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 			void __iomem *port_mmio = mv_port_base(mmio, port);
 
 			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-			ifctl |= (1 << 12);
+			ifctl |= (1 << 7);		/* enable gen2i speed */
+			ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 			writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 		}
 
@@ -2330,6 +2349,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc) {
 		return rc;
 	}
+	pci_set_master(pdev);
 
 	rc = pci_request_regions(pdev, DRV_NAME);
 	if (rc) {
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index f7264fd611c..cb9082fd7e2 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -454,7 +454,7 @@ static int sil24_softreset(struct ata_port *ap, int verbose,
 	 */
 	msleep(10);
 
-	prb->ctrl = PRB_CTRL_SRST;
+	prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
 	prb->fis[1] = 0; /* no PM yet */
 
 	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
@@ -551,9 +551,9 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 
 		if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
 			if (qc->tf.flags & ATA_TFLAG_WRITE)
-				prb->ctrl = PRB_CTRL_PACKET_WRITE;
+				prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_WRITE);
 			else
-				prb->ctrl = PRB_CTRL_PACKET_READ;
+				prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_READ);
 		} else
 			prb->ctrl = 0;
 
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index ae13e4a78d5..fb5cb4c9ac6 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -56,6 +56,8 @@ static struct {
 	{"DENON", "DRD-25X", "V", BLIST_NOLUN},			/* locks up */
 	{"HITACHI", "DK312C", "CM81", BLIST_NOLUN},	/* responds to all lun */
 	{"HITACHI", "DK314C", "CR21", BLIST_NOLUN},	/* responds to all lun */
+	{"IBM", "2104-DU3", NULL, BLIST_NOLUN},		/* locks up */
+	{"IBM", "2104-TU3", NULL, BLIST_NOLUN},		/* locks up */
 	{"IMS", "CDD521/10", "2.06", BLIST_NOLUN},	/* locks up */
 	{"MAXTOR", "XT-3280", "PR02", BLIST_NOLUN},	/* locks up */
 	{"MAXTOR", "XT-4380S", "B3C", BLIST_NOLUN},	/* locks up */
@@ -165,6 +167,7 @@ static struct {
 	{"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
 	{"HP", "C1557A", NULL, BLIST_FORCELUN},
 	{"HP", "C3323-300", "4269", BLIST_NOTQ},
+	{"HP", "C5713A", NULL, BLIST_NOREPORTLUN},
 	{"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN},
 	{"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"IBM", "2105", NULL, BLIST_RETRY_HWERROR},
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 3ca7b9d3086..bdce9d1f5b7 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -367,7 +367,7 @@ static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl,
 			   int nsegs, unsigned bufflen, gfp_t gfp)
 {
 	struct request_queue *q = rq->q;
-	int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	unsigned int data_len = 0, len, bytes, off;
 	struct page *page;
 	struct bio *bio = NULL;
@@ -1067,16 +1067,29 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 			break;
 		case NOT_READY:
 			/*
-			 * If the device is in the process of becoming ready,
-			 * retry.
+			 * If the device is in the process of becoming
+			 * ready, or has a temporary blockage, retry.
 			 */
-			if (sshdr.asc == 0x04 && sshdr.ascq == 0x01) {
-				scsi_requeue_command(q, cmd);
-				return;
+			if (sshdr.asc == 0x04) {
+				switch (sshdr.ascq) {
+				case 0x01: /* becoming ready */
+				case 0x04: /* format in progress */
+				case 0x05: /* rebuild in progress */
+				case 0x06: /* recalculation in progress */
+				case 0x07: /* operation in progress */
+				case 0x08: /* Long write in progress */
+				case 0x09: /* self test in progress */
+					scsi_requeue_command(q, cmd);
+					return;
+				default:
+					break;
+				}
 			}
-			if (!(req->flags & REQ_QUIET))
+			if (!(req->flags & REQ_QUIET)) {
 				scmd_printk(KERN_INFO, cmd,
-					   "Device not ready.\n");
+					   "Device not ready: ");
+				scsi_print_sense_hdr("", &sshdr);
+			}
 			scsi_end_request(cmd, 0, this_count, 1);
 			return;
 		case VOLUME_OVERFLOW:
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index ce4f806bd8e..6da6721eb0d 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -955,7 +955,8 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 	list_for_each_entry(rphy, &sas_host->rphy_list, list) {
 		struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
 
-		if (rphy->scsi_target_id == -1)
+		if (rphy->identify.device_type != SAS_END_DEVICE ||
+		    rphy->scsi_target_id == -1)
 			continue;
 
 		if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) &&
@@ -977,7 +978,6 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 #define SETUP_TEMPLATE(attrb, field, perm, test)				\
 	i->private_##attrb[count] = class_device_attr_##field;		\
 	i->private_##attrb[count].attr.mode = perm;			\
-	i->private_##attrb[count].store = NULL;				\
 	i->attrb[count] = &i->private_##attrb[count];			\
 	if (test)							\
 		count++
diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c
index 3274ab76c8d..255886a9ac5 100644
--- a/drivers/scsi/sim710.c
+++ b/drivers/scsi/sim710.c
@@ -75,7 +75,7 @@ param_setup(char *str)
 		else if(!strncmp(pos, "id:", 3)) {
 			if(slot == -1) {
 				printk(KERN_WARNING "sim710: Must specify slot for id parameter\n");
-			} else if(slot > MAX_SLOTS) {
+			} else if(slot >= MAX_SLOTS) {
 				printk(KERN_WARNING "sim710: Illegal slot %d for id %d\n", slot, val);
 			} else {
 				id_array[slot] = val;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 2691248b2cb..ad87d73f88e 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4054,7 +4054,7 @@ static int st_probe(struct device *dev)
 	}
 
 	sdev_printk(KERN_WARNING, SDp,
-		    "Attached scsi tape %s", tape_name(tpnt));
+		    "Attached scsi tape %s\n", tape_name(tpnt));
 	printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n",
 	       tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
 	       queue_dma_alignment(SDp->request_queue) + 1);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 674b15c78f6..bbf78aaf9e0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -362,6 +362,40 @@ serial_out(struct uart_8250_port *up, int offset, int value)
 #define serial_inp(up, offset)		serial_in(up, offset)
 #define serial_outp(up, offset, value)	serial_out(up, offset, value)
 
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+	return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+	serial_outp(up, UART_DLL, value & 0xff);
+	serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+/* Au1x00 haven't got a standard divisor latch */
+static int serial_dl_read(struct uart_8250_port *up)
+{
+	if (up->port.iotype == UPIO_AU)
+		return __raw_readl(up->port.membase + 0x28);
+	else
+		return _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+	if (up->port.iotype == UPIO_AU)
+		__raw_writel(value, up->port.membase + 0x28);
+	else
+		_serial_dl_write(up, value);
+}
+#else
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+#endif
 
 /*
  * For the 16C950
@@ -494,7 +528,8 @@ static void disable_rsa(struct uart_8250_port *up)
  */
 static int size_fifo(struct uart_8250_port *up)
 {
-	unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr;
+	unsigned char old_fcr, old_mcr, old_lcr;
+	unsigned short old_dl;
 	int count;
 
 	old_lcr = serial_inp(up, UART_LCR);
@@ -505,10 +540,8 @@ static int size_fifo(struct uart_8250_port *up)
 		    UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 	serial_outp(up, UART_MCR, UART_MCR_LOOP);
 	serial_outp(up, UART_LCR, UART_LCR_DLAB);
-	old_dll = serial_inp(up, UART_DLL);
-	old_dlm = serial_inp(up, UART_DLM);
-	serial_outp(up, UART_DLL, 0x01);
-	serial_outp(up, UART_DLM, 0x00);
+	old_dl = serial_dl_read(up);
+	serial_dl_write(up, 0x0001);
 	serial_outp(up, UART_LCR, 0x03);
 	for (count = 0; count < 256; count++)
 		serial_outp(up, UART_TX, count);
@@ -519,8 +552,7 @@ static int size_fifo(struct uart_8250_port *up)
 	serial_outp(up, UART_FCR, old_fcr);
 	serial_outp(up, UART_MCR, old_mcr);
 	serial_outp(up, UART_LCR, UART_LCR_DLAB);
-	serial_outp(up, UART_DLL, old_dll);
-	serial_outp(up, UART_DLM, old_dlm);
+	serial_dl_write(up, old_dl);
 	serial_outp(up, UART_LCR, old_lcr);
 
 	return count;
@@ -750,8 +782,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 
 			serial_outp(up, UART_LCR, 0xE0);
 
-			quot = serial_inp(up, UART_DLM) << 8;
-			quot += serial_inp(up, UART_DLL);
+			quot = serial_dl_read(up);
 			quot <<= 3;
 
 			status1 = serial_in(up, 0x04); /* EXCR1 */
@@ -759,8 +790,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
 			serial_outp(up, 0x04, status1);
 			
-			serial_outp(up, UART_DLL, quot & 0xff);
-			serial_outp(up, UART_DLM, quot >> 8);
+			serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -1862,8 +1892,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
 		serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
 	}
 
-	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */
-	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */
+	serial_dl_write(up, quot);
 
 	/*
 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
@@ -1906,6 +1935,9 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	int ret = 0;
 
 	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
 	case UPIO_MEM:
 		if (!up->port.mapbase)
 			break;
@@ -1938,6 +1970,9 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
 	unsigned int size = 8 << up->port.regshift;
 
 	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
 	case UPIO_MEM:
 		if (!up->port.mapbase)
 			break;
@@ -2200,10 +2235,17 @@ static void
 serial8250_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_8250_port *up = &serial8250_ports[co->index];
+	unsigned long flags;
 	unsigned int ier;
+	int locked = 1;
 
 	touch_nmi_watchdog();
 
+	if (oops_in_progress) {
+		locked = spin_trylock_irqsave(&up->port.lock, flags);
+	} else
+		spin_lock_irqsave(&up->port.lock, flags);
+
 	/*
 	 *	First save the IER then disable the interrupts
 	 */
@@ -2221,8 +2263,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, BOTH_EMPTY);
-	up->ier |= UART_IER_THRI;
-	serial_out(up, UART_IER, ier | UART_IER_THRI);
+	serial_out(up, UART_IER, ier);
+
+	if (locked)
+		spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
index 3d1bfd07208..58015fd14be 100644
--- a/drivers/serial/8250_au1x00.c
+++ b/drivers/serial/8250_au1x00.c
@@ -30,13 +30,12 @@
 	{						\
 		.iobase		= _base,		\
 		.membase	= (void __iomem *)_base,\
-		.mapbase	= _base,		\
+		.mapbase	= CPHYSADDR(_base),	\
 		.irq		= _irq,			\
 		.uartclk	= 0,	/* filled */	\
 		.regshift	= 2,			\
 		.iotype		= UPIO_AU,		\
-		.flags		= UPF_SKIP_TEST | 	\
-				  UPF_IOREMAP,		\
+		.flags		= UPF_SKIP_TEST 	\
 	}
 
 static struct plat_serial8250_port au1x00_data[] = {
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 73c8a088c16..3b35cb77953 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -5,11 +5,20 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *
+ *  2006 (c) MontaVista Software, Inc.
+ * 	Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
  */
 #ifndef CPM_UART_H
 #define CPM_UART_H
 
 #include <linux/config.h>
+#include <linux/platform_device.h>
+#include <linux/fs_uart_pd.h>
 
 #if defined(CONFIG_CPM2)
 #include "cpm_uart_cpm2.h"
@@ -26,14 +35,14 @@
 #define FLAG_SMC	0x00000002
 #define FLAG_CONSOLE	0x00000001
 
-#define UART_SMC1	0
-#define UART_SMC2	1
-#define UART_SCC1	2
-#define UART_SCC2	3
-#define UART_SCC3	4
-#define UART_SCC4	5
+#define UART_SMC1	fsid_smc1_uart
+#define UART_SMC2	fsid_smc2_uart
+#define UART_SCC1	fsid_scc1_uart
+#define UART_SCC2	fsid_scc2_uart
+#define UART_SCC3	fsid_scc3_uart
+#define UART_SCC4	fsid_scc4_uart
 
-#define UART_NR	6
+#define UART_NR		fs_uart_nr
 
 #define RX_NUM_FIFO	4
 #define RX_BUF_SIZE	32
@@ -64,6 +73,7 @@ struct uart_cpm_port {
 	uint			 dp_addr;
 	void			*mem_addr;
 	dma_addr_t		 dma_addr;
+	u32			mem_size;
 	/* helpers */
 	int			 baud;
 	int			 bits;
@@ -90,4 +100,38 @@ void scc2_lineif(struct uart_cpm_port *pinfo);
 void scc3_lineif(struct uart_cpm_port *pinfo);
 void scc4_lineif(struct uart_cpm_port *pinfo);
 
+/*
+   virtual to phys transtalion
+*/
+static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
+{
+	int offset;
+	u32 val = (u32)addr;
+	/* sane check */
+	if (likely((val >= (u32)pinfo->mem_addr)) &&
+			(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
+		offset = val - (u32)pinfo->mem_addr;
+		return pinfo->dma_addr+offset;
+	}
+	/* something nasty happened */
+	BUG();
+	return 0;
+}
+
+static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
+{
+	int offset;
+	u32 val = addr;
+	/* sane check */
+	if (likely((val >= pinfo->dma_addr) &&
+			(val<(pinfo->dma_addr + pinfo->mem_size)))) {
+		offset = val - (u32)pinfo->dma_addr;
+		return (void*)(pinfo->mem_addr+offset);
+	}
+	/* something nasty happened */
+	BUG();
+	return 0;
+}
+
+
 #endif /* CPM_UART_H */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index b7bf4c698a4..5cba59ad7dc 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -12,7 +12,8 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
- *            (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
+ *            (C) 2005-2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,6 +42,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/dma-mapping.h>
+#include <linux/fs_uart_pd.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -60,7 +62,7 @@
 /* Track which ports are configured as uarts */
 int cpm_uart_port_map[UART_NR];
 /* How many ports did we config as uarts */
-int cpm_uart_nr;
+int cpm_uart_nr = 0;
 
 /**************************************************************/
 
@@ -71,18 +73,51 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
-static inline unsigned long cpu2cpm_addr(void *addr)
+
+/* Place-holder for board-specific stuff */
+struct platform_device* __attribute__ ((weak)) __init
+early_uart_get_pdev(int index)
+{
+	return NULL;
+}
+
+
+static void cpm_uart_count(void)
 {
-	if ((unsigned long)addr >= CPM_ADDR)
-		return (unsigned long)addr;
-	return virt_to_bus(addr);
+	cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC1
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC2
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC3
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC4
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
 }
 
-static inline void *cpm2cpu_addr(unsigned long addr)
+/* Get UART number by its id */
+static int cpm_uart_id2nr(int id)
 {
-	if (addr >= CPM_ADDR)
-		return (void *)addr;
-	return bus_to_virt(addr);
+	int i;
+	if (id < UART_NR) {
+		for (i=0; i<UART_NR; i++) {
+			if (cpm_uart_port_map[i] == id)
+				return i;
+		}
+	}
+
+	/* not found or invalid argument */
+	return -1;
 }
 
 /*
@@ -258,7 +293,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
 		}
 
 		/* get pointer */
-		cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+		cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 		/* loop through the buffer */
 		while (i-- > 0) {
@@ -438,7 +473,11 @@ static void cpm_uart_shutdown(struct uart_port *port)
 		}
 
 		/* Shut them really down and reinit buffer descriptors */
-		cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+		if (IS_SMC(pinfo))
+			cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+		else
+			cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX);
+
 		cpm_uart_initbd(pinfo);
 	}
 }
@@ -601,7 +640,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 		/* Pick next descriptor and fill from buffer */
 		bdp = pinfo->tx_cur;
 
-		p = cpm2cpu_addr(bdp->cbd_bufaddr);
+		p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 		*p++ = port->x_char;
 		bdp->cbd_datlen = 1;
@@ -628,7 +667,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 
 	while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
 		count = 0;
-		p = cpm2cpu_addr(bdp->cbd_bufaddr);
+		p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 		while (count < pinfo->tx_fifosize) {
 			*p++ = xmit->buf[xmit->tail];
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -677,12 +716,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr;
 	bdp = pinfo->rx_cur = pinfo->rx_bd_base;
 	for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 		bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
 		mem_addr += pinfo->rx_fifosize;
 	}
 
-	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 	bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
 
 	/* Set the physical address of the host memory
@@ -692,12 +731,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
 	bdp = pinfo->tx_cur = pinfo->tx_bd_base;
 	for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 		bdp->cbd_sc = BD_SC_INTRPT;
 		mem_addr += pinfo->tx_fifosize;
 	}
 
-	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 	bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
 }
 
@@ -829,14 +868,6 @@ static int cpm_uart_request_port(struct uart_port *port)
 	if (pinfo->flags & FLAG_CONSOLE)
 		return 0;
 
-	/*
-	 * Setup any port IO, connect any baud rate generators,
-	 * etc.  This is expected to be handled by board
-	 * dependant code
-	 */
-	if (pinfo->set_lineif)
-		pinfo->set_lineif(pinfo);
-
 	if (IS_SMC(pinfo)) {
 		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
 		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@@ -988,6 +1019,58 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 	},
 };
 
+int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
+{
+	struct resource *r;
+	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+	int idx = pdata->fs_no;	/* It is UART_SMCx or UART_SCCx index */
+	struct uart_cpm_port *pinfo;
+	int line;
+	u32 mem, pram;
+
+	line = cpm_uart_id2nr(idx);
+	if(line < 0) {
+		printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
+		return -1;
+	}
+
+	pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
+
+	pinfo->brg = pdata->brg;
+
+	if (!is_con) {
+		pinfo->port.line = line;
+		pinfo->port.flags = UPF_BOOT_AUTOCONF;
+	}
+
+	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
+		return -EINVAL;
+	mem = r->start;
+
+	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
+		return -EINVAL;
+	pram = r->start;
+
+	if(idx > fsid_smc2_uart) {
+		pinfo->sccp = (scc_t *)mem;
+		pinfo->sccup = (scc_uart_t *)pram;
+	} else {
+		pinfo->smcp = (smc_t *)mem;
+		pinfo->smcup = (smc_uart_t *)pram;
+	}
+	pinfo->tx_nrfifos = pdata->tx_num_fifo;
+	pinfo->tx_fifosize = pdata->tx_buf_size;
+
+	pinfo->rx_nrfifos = pdata->rx_num_fifo;
+	pinfo->rx_fifosize = pdata->rx_buf_size;
+
+	pinfo->port.uartclk = pdata->uart_clk;
+	pinfo->port.mapbase = (unsigned long)mem;
+	pinfo->port.irq = platform_get_irq(pdev, 0);
+
+	return 0;
+}
+
 #ifdef CONFIG_SERIAL_CPM_CONSOLE
 /*
  *	Print a string to the serial port trying not to disturb
@@ -1027,7 +1110,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 		 * If the buffer address is in the CPM DPRAM, don't
 		 * convert it.
 		 */
-		cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+		cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 		*cp = *s;
 
@@ -1044,7 +1127,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 			while ((bdp->cbd_sc & BD_SC_READY) != 0)
 				;
 
-			cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+			cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 			*cp = 13;
 			bdp->cbd_datlen = 1;
@@ -1067,9 +1150,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 	pinfo->tx_cur = (volatile cbd_t *) bdp;
 }
 
-/*
- * Setup console. Be careful is called early !
- */
+
 static int __init cpm_uart_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
@@ -1080,9 +1161,29 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	int flow = 'n';
 	int ret;
 
+	struct fs_uart_platform_info *pdata;
+	struct platform_device* pdev = early_uart_get_pdev(co->index);
+
+	if (!pdev) {
+		pr_info("cpm_uart: console: compat mode\n");
+		/* compatibility - will be cleaned up */
+		cpm_uart_init_portdesc();
+	}
+
 	port =
 	    (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
 	pinfo = (struct uart_cpm_port *)port;
+	if (!pdev) {
+		if (pinfo->set_lineif)
+			pinfo->set_lineif(pinfo);
+	} else {
+		pdata = pdev->dev.platform_data;
+		if (pdata)
+			if (pdata->init_ioports)
+    	                	pdata->init_ioports();
+
+		cpm_uart_drv_get_platform_data(pdev, 1);
+	}
 
 	pinfo->flags |= FLAG_CONSOLE;
 
@@ -1097,14 +1198,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 			baud = 9600;
 	}
 
-	/*
-	 * Setup any port IO, connect any baud rate generators,
-	 * etc.  This is expected to be handled by board
-	 * dependant code
-	 */
-	if (pinfo->set_lineif)
-		pinfo->set_lineif(pinfo);
-
 	if (IS_SMC(pinfo)) {
 		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
 		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@@ -1143,11 +1236,8 @@ static struct console cpm_scc_uart_console = {
 
 int __init cpm_uart_console_init(void)
 {
-	int ret = cpm_uart_init_portdesc();
-
-	if (!ret)
-		register_console(&cpm_scc_uart_console);
-	return ret;
+	register_console(&cpm_scc_uart_console);
+	return 0;
 }
 
 console_initcall(cpm_uart_console_init);
@@ -1165,44 +1255,129 @@ static struct uart_driver cpm_reg = {
 	.minor		= SERIAL_CPM_MINOR,
 	.cons		= CPM_UART_CONSOLE,
 };
-
-static int __init cpm_uart_init(void)
+static int cpm_uart_drv_probe(struct device *dev)
 {
-	int ret, i;
-
-	printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
+	struct platform_device  *pdev = to_platform_device(dev);
+	struct fs_uart_platform_info *pdata;
+	int ret = -ENODEV;
 
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
-	ret = cpm_uart_init_portdesc();
-	if (ret)
+	if(!pdev) {
+		printk(KERN_ERR"CPM UART: platform data missing!\n");
 		return ret;
-#endif
+	}
 
-	cpm_reg.nr = cpm_uart_nr;
-	ret = uart_register_driver(&cpm_reg);
+	pdata = pdev->dev.platform_data;
+	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
 
-	if (ret)
+	if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
 		return ret;
 
-	for (i = 0; i < cpm_uart_nr; i++) {
-		int con = cpm_uart_port_map[i];
-		cpm_uart_ports[con].port.line = i;
-		cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
-		uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
-	}
+	if (pdata->init_ioports)
+                pdata->init_ioports();
 
-	return ret;
+	ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+
+        return ret;
 }
 
-static void __exit cpm_uart_exit(void)
+static int cpm_uart_drv_remove(struct device *dev)
+{
+	struct platform_device  *pdev = to_platform_device(dev);
+	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+
+	pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
+			cpm_uart_id2nr(pdata->fs_no));
+
+        uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+        return 0;
+}
+
+static struct device_driver cpm_smc_uart_driver = {
+        .name   = "fsl-cpm-smc:uart",
+        .bus    = &platform_bus_type,
+        .probe  = cpm_uart_drv_probe,
+        .remove = cpm_uart_drv_remove,
+};
+
+static struct device_driver cpm_scc_uart_driver = {
+        .name   = "fsl-cpm-scc:uart",
+        .bus    = &platform_bus_type,
+        .probe  = cpm_uart_drv_probe,
+        .remove = cpm_uart_drv_remove,
+};
+
+/*
+   This is supposed to match uart devices on platform bus,
+   */
+static int match_is_uart (struct device* dev, void* data)
 {
+	struct platform_device* pdev = container_of(dev, struct platform_device, dev);
+	int ret = 0;
+	/* this was setfunc as uart */
+	if(strstr(pdev->name,":uart")) {
+		ret = 1;
+	}
+	return ret;
+}
+
+
+static int cpm_uart_init(void) {
+
+	int ret;
 	int i;
+	struct device *dev;
+	printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
+
+	/* lookup the bus for uart devices */
+	dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
+
+	/* There are devices on the bus - all should be OK  */
+	if (dev) {
+		cpm_uart_count();
+		cpm_reg.nr = cpm_uart_nr;
+
+		if (!(ret = uart_register_driver(&cpm_reg))) {
+			if ((ret = driver_register(&cpm_smc_uart_driver))) {
+				uart_unregister_driver(&cpm_reg);
+				return ret;
+			}
+			if ((ret = driver_register(&cpm_scc_uart_driver))) {
+				driver_unregister(&cpm_scc_uart_driver);
+				uart_unregister_driver(&cpm_reg);
+			}
+		}
+	} else {
+	/* No capable platform devices found - falling back to legacy mode */
+		pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
+		pr_info(
+		"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
+#ifndef CONFIG_SERIAL_CPM_CONSOLE
+		ret = cpm_uart_init_portdesc();
+		if (ret)
+			return ret;
+#endif
+
+		cpm_reg.nr = cpm_uart_nr;
+		ret = uart_register_driver(&cpm_reg);
+
+		if (ret)
+			return ret;
+
+		for (i = 0; i < cpm_uart_nr; i++) {
+			int con = cpm_uart_port_map[i];
+			cpm_uart_ports[con].port.line = i;
+			cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+			uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+		}
 
-	for (i = 0; i < cpm_uart_nr; i++) {
-		int con = cpm_uart_port_map[i];
-		uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
 	}
+	return ret;
+}
 
+static void __exit cpm_uart_exit(void)
+{
+	driver_unregister(&cpm_scc_uart_driver);
+	driver_unregister(&cpm_smc_uart_driver);
 	uart_unregister_driver(&cpm_reg);
 }
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index d789ee55cbb..17406a05ce1 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -8,6 +8,8 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -81,58 +83,11 @@ void cpm_line_cr_cmd(int line, int cmd)
 
 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile cpm8xx_t *cp = cpmp;
-
-	(void)cp;	/* fix warning */
-#if defined (CONFIG_MPC885ADS)
-	/* Enable SMC1 transceivers */
-	{
-		cp->cp_pepar |= 0x000000c0;
-		cp->cp_pedir &= ~0x000000c0;
-		cp->cp_peso &= ~0x00000040;
-		cp->cp_peso |= 0x00000080;
-	}
-#elif defined (CONFIG_MPC86XADS)
-	unsigned int iobits = 0x000000c0;
-
-	if (!pinfo->is_portb) {
-		cp->cp_pbpar |= iobits;
-		cp->cp_pbdir &= ~iobits;
-		cp->cp_pbodr &= ~iobits;
-	} else {
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
-	}
-#endif
 	pinfo->brg = 1;
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile cpm8xx_t *cp = cpmp;
-
-	(void)cp;	/* fix warning */
-#if defined (CONFIG_MPC885ADS)
-	cp->cp_pepar |= 0x00000c00;
-	cp->cp_pedir &= ~0x00000c00;
-	cp->cp_peso &= ~0x00000400;
-	cp->cp_peso |= 0x00000800;
-#elif defined (CONFIG_MPC86XADS)
-	unsigned int iobits = 0x00000c00;
-
-	if (!pinfo->is_portb) {
-		cp->cp_pbpar |= iobits;
-		cp->cp_pbdir &= ~iobits;
-		cp->cp_pbodr &= ~iobits;
-	} else {
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
-	}
-
-#endif
-
 	pinfo->brg = 2;
 }
 
@@ -191,7 +146,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 		/* was hostalloc but changed cause it blows away the */
 		/* large tlb mapping when pinning the kernel area    */
 		mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
-		dma_addr = 0;
+		dma_addr = (u32)mem_addr;
 	} else
 		mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
 					      GFP_KERNEL);
@@ -204,8 +159,9 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	}
 
 	pinfo->dp_addr = dp_offset;
-	pinfo->mem_addr = mem_addr;
-	pinfo->dma_addr = dma_addr;
+	pinfo->mem_addr = mem_addr;             /*  virtual address*/
+	pinfo->dma_addr = dma_addr;             /*  physical address*/
+	pinfo->mem_size = memsz;
 
 	pinfo->rx_buf = mem_addr;
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index fd9e53ed3fe..cdba128250a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -8,6 +8,8 @@
  * 
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -142,14 +144,6 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
 	 * be supported in a sane fashion.
 	 */
 #ifndef CONFIG_STX_GP3
-#ifdef CONFIG_MPC8560_ADS
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
-	io->iop_ppard |= 0x00000018;
-	io->iop_psord &= ~0x00000008;	/* Rx */
-	io->iop_psord &= ~0x00000010;	/* Tx */
-	io->iop_pdird &= ~0x00000008;	/* Rx */
-	io->iop_pdird |= 0x00000010;	/* Tx */
-#else
 	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
 	io->iop_pparb |= 0x008b0000;
 	io->iop_pdirb |= 0x00880000;
@@ -157,7 +151,6 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
 	io->iop_pdirb &= ~0x00030000;
 	io->iop_psorb &= ~0x00030000;
 #endif
-#endif
 	cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
 	cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
 	pinfo->brg = 2;
@@ -218,8 +211,10 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 
 	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
-	if (is_con)
+	if (is_con) {
 		mem_addr = alloc_bootmem(memsz);
+		dma_addr = virt_to_bus(mem_addr);
+	}
 	else
 		mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
 					      GFP_KERNEL);
@@ -234,6 +229,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	pinfo->dp_addr = dp_offset;
 	pinfo->mem_addr = mem_addr;
 	pinfo->dma_addr = dma_addr;
+	pinfo->mem_size = memsz;
 
 	pinfo->rx_buf = mem_addr;
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index c3b7a6673e9..d202eb4f384 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -45,6 +45,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_IMX_MAJOR	204
@@ -73,7 +74,8 @@ struct imx_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
-	int txirq,rxirq,rtsirq;
+	int			txirq,rxirq,rtsirq;
+	int			have_rtscts:1;
 };
 
 /*
@@ -491,8 +493,12 @@ imx_set_termios(struct uart_port *port, struct termios *termios,
 		ucr2 = UCR2_SRST | UCR2_IRTS;
 
 	if (termios->c_cflag & CRTSCTS) {
-		ucr2 &= ~UCR2_IRTS;
-		ucr2 |= UCR2_CTSC;
+		if( sport->have_rtscts ) {
+			ucr2 &= ~UCR2_IRTS;
+			ucr2 |= UCR2_CTSC;
+		} else {
+			termios->c_cflag &= ~CRTSCTS;
+		}
 	}
 
 	if (termios->c_cflag & CSTOPB)
@@ -719,27 +725,6 @@ static void __init imx_init_ports(void)
 		imx_ports[i].timer.function = imx_timeout;
 		imx_ports[i].timer.data     = (unsigned long)&imx_ports[i];
 	}
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
-       * is implemented.
-       */
-	imx_gpio_mode(PD7_AF_UART2_DTR);
-	imx_gpio_mode(PD8_AF_UART2_DCD);
-	imx_gpio_mode(PD9_AF_UART2_RI);
-	imx_gpio_mode(PD10_AF_UART2_DSR);
-#endif
-
-
 }
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
@@ -932,7 +917,14 @@ static int serial_imx_resume(struct platform_device *dev)
 
 static int serial_imx_probe(struct platform_device *dev)
 {
+	struct imxuart_platform_data *pdata;
+
 	imx_ports[dev->id].port.dev = &dev->dev;
+
+	pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+		imx_ports[dev->id].have_rtscts = 1;
+
 	uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
 	platform_set_drvdata(dev, &imx_ports[dev->id]);
 	return 0;
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index e9c10c0a30f..321a40f33b5 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1057,7 +1057,6 @@ static void m32r_sio_console_write(struct console *co, const char *s,
 {
 	struct uart_sio_port *up = &m32r_sio_ports[co->index];
 	unsigned int ier;
-	int i;
 
 	/*
 	 *	First save the UER then disable the interrupts
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index fcd7744c425..17839e753e4 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1500,20 +1500,18 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
 	struct uart_state *state;
+	int ret = 0;
 
-	mutex_lock(&port_mutex);
 	state = drv->state + line;
 	if (mutex_lock_interruptible(&state->mutex)) {
-		state = ERR_PTR(-ERESTARTSYS);
-		goto out;
+		ret = -ERESTARTSYS;
+		goto err;
 	}
 
 	state->count++;
-	if (!state->port) {
-		state->count--;
-		mutex_unlock(&state->mutex);
-		state = ERR_PTR(-ENXIO);
-		goto out;
+	if (!state->port || state->port->flags & UPF_DEAD) {
+		ret = -ENXIO;
+		goto err_unlock;
 	}
 
 	if (!state->info) {
@@ -1531,15 +1529,17 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 			tasklet_init(&state->info->tlet, uart_tasklet_action,
 				     (unsigned long)state);
 		} else {
-			state->count--;
-			mutex_unlock(&state->mutex);
-			state = ERR_PTR(-ENOMEM);
+			ret = -ENOMEM;
+			goto err_unlock;
 		}
 	}
-
- out:
-	mutex_unlock(&port_mutex);
 	return state;
+
+ err_unlock:
+	state->count--;
+	mutex_unlock(&state->mutex);
+ err:
+	return ERR_PTR(ret);
 }
 
 /*
@@ -1907,9 +1907,12 @@ uart_set_options(struct uart_port *port, struct console *co,
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
 	struct uart_port *port = state->port;
-	if (port->ops->pm)
-		port->ops->pm(port, pm_state, state->pm_state);
-	state->pm_state = pm_state;
+
+	if (state->pm_state != pm_state) {
+		if (port->ops->pm)
+			port->ops->pm(port, pm_state, state->pm_state);
+		state->pm_state = pm_state;
+	}
 }
 
 int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
@@ -2085,45 +2088,6 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 	}
 }
 
-/*
- * This reverses the effects of uart_configure_port, hanging up the
- * port before removal.
- */
-static void
-uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
-{
-	struct uart_port *port = state->port;
-	struct uart_info *info = state->info;
-
-	if (info && info->tty)
-		tty_vhangup(info->tty);
-
-	mutex_lock(&state->mutex);
-
-	state->info = NULL;
-
-	/*
-	 * Free the port IO and memory resources, if any.
-	 */
-	if (port->type != PORT_UNKNOWN)
-		port->ops->release_port(port);
-
-	/*
-	 * Indicate that there isn't a port here anymore.
-	 */
-	port->type = PORT_UNKNOWN;
-
-	/*
-	 * Kill the tasklet, and free resources.
-	 */
-	if (info) {
-		tasklet_kill(&info->tlet);
-		kfree(info);
-	}
-
-	mutex_unlock(&state->mutex);
-}
-
 static struct tty_operations uart_ops = {
 	.open		= uart_open,
 	.close		= uart_close,
@@ -2270,6 +2234,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	state = drv->state + port->line;
 
 	mutex_lock(&port_mutex);
+	mutex_lock(&state->mutex);
 	if (state->port) {
 		ret = -EINVAL;
 		goto out;
@@ -2304,7 +2269,13 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	    port->cons && !(port->cons->flags & CON_ENABLED))
 		register_console(port->cons);
 
+	/*
+	 * Ensure UPF_DEAD is not set.
+	 */
+	port->flags &= ~UPF_DEAD;
+
  out:
+	mutex_unlock(&state->mutex);
 	mutex_unlock(&port_mutex);
 
 	return ret;
@@ -2322,6 +2293,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 {
 	struct uart_state *state = drv->state + port->line;
+	struct uart_info *info;
 
 	BUG_ON(in_interrupt());
 
@@ -2332,11 +2304,48 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 	mutex_lock(&port_mutex);
 
 	/*
+	 * Mark the port "dead" - this prevents any opens from
+	 * succeeding while we shut down the port.
+	 */
+	mutex_lock(&state->mutex);
+	port->flags |= UPF_DEAD;
+	mutex_unlock(&state->mutex);
+
+	/*
 	 * Remove the devices from devfs
 	 */
 	tty_unregister_device(drv->tty_driver, port->line);
 
-	uart_unconfigure_port(drv, state);
+	info = state->info;
+	if (info && info->tty)
+		tty_vhangup(info->tty);
+
+	/*
+	 * All users of this port should now be disconnected from
+	 * this driver, and the port shut down.  We should be the
+	 * only thread fiddling with this port from now on.
+	 */
+	state->info = NULL;
+
+	/*
+	 * Free the port IO and memory resources, if any.
+	 */
+	if (port->type != PORT_UNKNOWN)
+		port->ops->release_port(port);
+
+	/*
+	 * Indicate that there isn't a port here anymore.
+	 */
+	port->type = PORT_UNKNOWN;
+
+	/*
+	 * Kill the tasklet, and free resources.
+	 */
+	if (info) {
+		tasklet_kill(&info->tlet);
+		kfree(info);
+	}
+
 	state->port = NULL;
 	mutex_unlock(&port_mutex);
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 1c4396c2962..2b4f96541b8 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1730,3 +1730,4 @@ static void __exit sunsu_exit(void)
 
 module_init(sunsu_probe);
 module_exit(sunsu_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index 0b49ff78efc..501316b198e 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -678,7 +678,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	/* Track PCI-device specific data */
 	pci_set_drvdata(pdev, idd);
 	down_write(&ioc3_devices_rwsem);
-	list_add(&idd->list, &ioc3_devices);
+	list_add_tail(&idd->list, &ioc3_devices);
 	idd->id = ioc3_counter++;
 	up_write(&ioc3_devices_rwsem);
 
diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
index 67140a5804f..cdeff909403 100644
--- a/drivers/sn/ioc4.c
+++ b/drivers/sn/ioc4.c
@@ -310,7 +310,7 @@ ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	pci_set_drvdata(idd->idd_pdev, idd);
 
 	mutex_lock(&ioc4_mutex);
-	list_add(&idd->idd_list, &ioc4_devices);
+	list_add_tail(&idd->idd_list, &ioc4_devices);
 
 	/* Add this IOC4 to all submodules */
 	list_for_each_entry(is, &ioc4_submodules, is_list) {
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7a75faeb052..23334c8bc4c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,11 +75,45 @@ config SPI_BUTTERFLY
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.
 
+config SPI_MPC83xx
+	tristate "Freescale MPC83xx SPI controller"
+	depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+	select SPI_BITBANG
+	help
+	  This enables using the Freescale MPC83xx SPI controller in master
+	  mode.
+
+	  Note, this driver uniquely supports the SPI controller on the MPC83xx
+	  family of PowerPC processors.  The MPC83xx uses a simple set of shift
+	  registers for data (opposed to the CPM based descriptor model).
+
+config SPI_PXA2XX
+	tristate "PXA2xx SSP SPI master"
+	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+	help
+	  This enables using a PXA2xx SSP port as a SPI master controller.
+	  The driver can be configured to use any SSP port and additional
+	  documentation can be found a Documentation/spi/pxa2xx.
+
+config SPI_S3C24XX_GPIO
+	tristate "Samsung S3C24XX series SPI by GPIO"
+	depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
+	help
+	  SPI driver for Samsung S3C24XX series ARM SoCs using
+	  GPIO lines to provide the SPI bus. This can be used where
+	  the inbuilt hardware cannot provide the transfer mode, or
+	  where the board is using non hardware connected pins.
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
 
 
+config SPI_S3C24XX
+	tristate "Samsung S3C24XX series SPI"
+	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+	help
+	  SPI driver for Samsung S3C24XX series ARM SoCs
+
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index c2c87e845ab..8f4cb67997b 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_SPI_MASTER)		+= spi.o
 # SPI master controller drivers (bus)
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
+obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
+obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
+obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
new file mode 100644
index 00000000000..29aec77f98b
--- /dev/null
+++ b/drivers/spi/pxa2xx_spi.c
@@ -0,0 +1,1486 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/delay.h>
+#include <asm/dma.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+
+MODULE_AUTHOR("Stephen Street");
+MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller");
+MODULE_LICENSE("GPL");
+
+#define MAX_BUSES 3
+
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+
+#define DEFINE_SSP_REG(reg, off) \
+static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
+static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
+
+DEFINE_SSP_REG(SSCR0, 0x00)
+DEFINE_SSP_REG(SSCR1, 0x04)
+DEFINE_SSP_REG(SSSR, 0x08)
+DEFINE_SSP_REG(SSITR, 0x0c)
+DEFINE_SSP_REG(SSDR, 0x10)
+DEFINE_SSP_REG(SSTO, 0x28)
+DEFINE_SSP_REG(SSPSP, 0x2c)
+
+#define START_STATE ((void*)0)
+#define RUNNING_STATE ((void*)1)
+#define DONE_STATE ((void*)2)
+#define ERROR_STATE ((void*)-1)
+
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+
+struct driver_data {
+	/* Driver model hookup */
+	struct platform_device *pdev;
+
+	/* SPI framework hookup */
+	enum pxa_ssp_type ssp_type;
+	struct spi_master *master;
+
+	/* PXA hookup */
+	struct pxa2xx_spi_master *master_info;
+
+	/* DMA setup stuff */
+	int rx_channel;
+	int tx_channel;
+	u32 *null_dma_buf;
+
+	/* SSP register addresses */
+	void *ioaddr;
+	u32 ssdr_physical;
+
+	/* SSP masks*/
+	u32 dma_cr1;
+	u32 int_cr1;
+	u32 clear_sr;
+	u32 mask_sr;
+
+	/* Driver message queue */
+	struct workqueue_struct	*workqueue;
+	struct work_struct pump_messages;
+	spinlock_t lock;
+	struct list_head queue;
+	int busy;
+	int run;
+
+	/* Message Transfer pump */
+	struct tasklet_struct pump_transfers;
+
+	/* Current message transfer state info */
+	struct spi_message* cur_msg;
+	struct spi_transfer* cur_transfer;
+	struct chip_data *cur_chip;
+	size_t len;
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+	int dma_mapped;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+	size_t rx_map_len;
+	size_t tx_map_len;
+	u8 n_bytes;
+	u32 dma_width;
+	int cs_change;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+struct chip_data {
+	u32 cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+	u32 timeout;
+	u8 n_bytes;
+	u32 dma_width;
+	u32 dma_burst_size;
+	u32 threshold;
+	u32 dma_threshold;
+	u8 enable_dma;
+	u8 bits_per_word;
+	u32 speed_hz;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+static void pump_messages(void *data);
+
+static int flush(struct driver_data *drv_data)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	void *reg = drv_data->ioaddr;
+
+	do {
+		while (read_SSSR(reg) & SSSR_RNE) {
+			read_SSDR(reg);
+		}
+	} while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+	write_SSSR(SSSR_ROR, reg);
+
+	return limit;
+}
+
+static void restore_state(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	/* Clear status and disable clock */
+	write_SSSR(drv_data->clear_sr, reg);
+	write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg);
+
+	/* Load the registers */
+	write_SSCR1(drv_data->cur_chip->cr1, reg);
+	write_SSCR0(drv_data->cur_chip->cr0, reg);
+	if (drv_data->ssp_type != PXA25x_SSP) {
+		write_SSTO(0, reg);
+		write_SSPSP(drv_data->cur_chip->psp, reg);
+	}
+}
+
+static void null_cs_control(u32 command)
+{
+}
+
+static void null_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(0, reg);
+		drv_data->tx += n_bytes;
+	}
+}
+
+static void null_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		read_SSDR(reg);
+		drv_data->rx += n_bytes;
+	}
+}
+
+static void u8_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u8 *)(drv_data->tx), reg);
+		++drv_data->tx;
+	}
+}
+
+static void u8_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u8 *)(drv_data->rx) = read_SSDR(reg);
+		++drv_data->rx;
+	}
+}
+
+static void u16_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u16 *)(drv_data->tx), reg);
+		drv_data->tx += 2;
+	}
+}
+
+static void u16_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u16 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 2;
+	}
+}
+static void u32_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u32 *)(drv_data->tx), reg);
+		drv_data->tx += 4;
+	}
+}
+
+static void u32_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u32 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 4;
+	}
+}
+
+static void *next_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct spi_transfer *trans = drv_data->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		drv_data->cur_transfer =
+			list_entry(trans->transfer_list.next,
+					struct spi_transfer,
+					transfer_list);
+		return RUNNING_STATE;
+	} else
+		return DONE_STATE;
+}
+
+static int map_dma_buffers(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct device *dev = &msg->spi->dev;
+
+	if (!drv_data->cur_chip->enable_dma)
+		return 0;
+
+	if (msg->is_dma_mapped)
+		return  drv_data->rx_dma && drv_data->tx_dma;
+
+	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
+		return 0;
+
+	/* Modify setup if rx buffer is null */
+	if (drv_data->rx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->rx = drv_data->null_dma_buf;
+		drv_data->rx_map_len = 4;
+	} else
+		drv_data->rx_map_len = drv_data->len;
+
+
+	/* Modify setup if tx buffer is null */
+	if (drv_data->tx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->tx = drv_data->null_dma_buf;
+		drv_data->tx_map_len = 4;
+	} else
+		drv_data->tx_map_len = drv_data->len;
+
+	/* Stream map the rx buffer */
+	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+						drv_data->rx_map_len,
+						DMA_FROM_DEVICE);
+	if (dma_mapping_error(drv_data->rx_dma))
+		return 0;
+
+	/* Stream map the tx buffer */
+	drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
+						drv_data->tx_map_len,
+						DMA_TO_DEVICE);
+
+	if (dma_mapping_error(drv_data->tx_dma)) {
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void unmap_dma_buffers(struct driver_data *drv_data)
+{
+	struct device *dev;
+
+	if (!drv_data->dma_mapped)
+		return;
+
+	if (!drv_data->cur_msg->is_dma_mapped) {
+		dev = &drv_data->cur_msg->spi->dev;
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		dma_unmap_single(dev, drv_data->tx_dma,
+					drv_data->tx_map_len, DMA_TO_DEVICE);
+	}
+
+	drv_data->dma_mapped = 0;
+}
+
+/* caller already set message->status; dma and pio irqs are blocked */
+static void giveback(struct driver_data *drv_data)
+{
+	struct spi_transfer* last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	msg = drv_data->cur_msg;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	if (!last_transfer->cs_change)
+		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+}
+
+static int wait_ssp_rx_stall(void *ioaddr)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static int wait_dma_channel_stop(int channel)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static void dma_handler(int channel, void *data, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = data;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+	u32 trailing_sssr = 0;
+
+	if (irq_status & DCSR_BUSERR) {
+
+		/* Disable interrupts, clear status and reset DMA */
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_handler: flush fail\n");
+
+		unmap_dma_buffers(drv_data);
+
+		if (channel == drv_data->tx_channel)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"tx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+		else
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"rx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+
+		msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+
+	/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
+	if ((drv_data->ssp_type == PXA25x_SSP)
+		&& (channel == drv_data->tx_channel)
+		&& (irq_status & DCSR_ENDINTR)) {
+
+		/* Wait for rx to stall */
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: ssp rx stall failed\n");
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: dma rx channel stop failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Read trailing bytes */
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+}
+
+static irqreturn_t dma_transfer(struct driver_data *drv_data)
+{
+	u32 irq_status;
+	u32 trailing_sssr = 0;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+
+	irq_status = read_SSSR(reg) & drv_data->mask_sr;
+	if (irq_status & SSSR_ROR) {
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		unmap_dma_buffers(drv_data);
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_transfer: flush fail\n");
+
+		dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n");
+
+		drv_data->cur_msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Check for false positive timeout */
+	if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) {
+		write_SSSR(SSSR_TINT, reg);
+		return IRQ_HANDLED;
+	}
+
+	if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: dma rx channel stop failed\n");
+
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: ssp rx stall failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Opps problem detected */
+	return IRQ_NONE;
+}
+
+static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	unsigned long limit = loops_per_jiffy << 1;
+	u32 irq_status;
+	u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
+			drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
+
+	while ((irq_status = read_SSSR(reg) & irq_mask)) {
+
+		if (irq_status & SSSR_ROR) {
+
+			/* Clear and disable interrupts */
+			write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+
+			if (flush(drv_data) == 0)
+				dev_err(&drv_data->pdev->dev,
+					"interrupt_transfer: flush fail\n");
+
+			/* Stop the SSP */
+
+			dev_warn(&drv_data->pdev->dev,
+					"interrupt_transfer: fifo overun\n");
+
+			msg->state = ERROR_STATE;
+			tasklet_schedule(&drv_data->pump_transfers);
+
+			return IRQ_HANDLED;
+		}
+
+		/* Look for false positive timeout */
+		if ((irq_status & SSSR_TINT)
+				&& (drv_data->rx < drv_data->rx_end))
+			write_SSSR(SSSR_TINT, reg);
+
+		/* Pump data */
+		drv_data->read(drv_data);
+		drv_data->write(drv_data);
+
+		if (drv_data->tx == drv_data->tx_end) {
+			/* Disable tx interrupt */
+			write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+			irq_mask = drv_data->mask_sr & ~SSSR_TFS;
+
+			/* PXA25x_SSP has no timeout, read trailing bytes */
+			if (drv_data->ssp_type == PXA25x_SSP) {
+				while ((read_SSSR(reg) & SSSR_BSY) && limit--)
+					drv_data->read(drv_data);
+
+				if (limit == 0)
+					dev_err(&drv_data->pdev->dev,
+						"interrupt_transfer: "
+						"trailing byte read failed\n");
+			}
+		}
+
+		if ((irq_status & SSSR_TINT)
+				|| (drv_data->rx == drv_data->rx_end)) {
+
+			/* Clear timeout */
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+
+			/* Update total byte transfered */
+			msg->actual_length += drv_data->len;
+
+			/* Release chip select if requested, transfer delays are
+			 * handled in pump_transfers */
+			if (drv_data->cs_change)
+				drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+			/* Move to next transfer */
+			msg->state = next_transfer(drv_data);
+
+			/* Schedule transfer tasklet */
+			tasklet_schedule(&drv_data->pump_transfers);
+		}
+	}
+
+	/* We did something */
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = (struct driver_data *)dev_id;
+	void *reg = drv_data->ioaddr;
+
+	if (!drv_data->cur_msg) {
+
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+
+		dev_err(&drv_data->pdev->dev, "bad message state "
+				"in interrupt handler");
+
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	return drv_data->transfer_handler(drv_data);
+}
+
+static void pump_transfers(unsigned long data)
+{
+	struct driver_data *drv_data = (struct driver_data *)data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip = NULL;
+	void *reg = drv_data->ioaddr;
+	u32 clk_div = 0;
+	u8 bits = 0;
+	u32 speed = 0;
+	u32 cr0;
+
+	/* Get current state information */
+	message = drv_data->cur_msg;
+	transfer = drv_data->cur_transfer;
+	chip = drv_data->cur_chip;
+
+	/* Handle for abort */
+	if (message->state == ERROR_STATE) {
+		message->status = -EIO;
+		giveback(drv_data);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == DONE_STATE) {
+		message->status = 0;
+		giveback(drv_data);
+		return;
+	}
+
+	/* Delay if requested at end of transfer*/
+	if (message->state == RUNNING_STATE) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			udelay(previous->delay_usecs);
+	}
+
+	/* Setup the transfer state based on the type of transfer */
+	if (flush(drv_data) == 0) {
+		dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+		message->status = -EIO;
+		giveback(drv_data);
+		return;
+	}
+	drv_data->n_bytes = chip->n_bytes;
+	drv_data->dma_width = chip->dma_width;
+	drv_data->cs_control = chip->cs_control;
+	drv_data->tx = (void *)transfer->tx_buf;
+	drv_data->tx_end = drv_data->tx + transfer->len;
+	drv_data->rx = transfer->rx_buf;
+	drv_data->rx_end = drv_data->rx + transfer->len;
+	drv_data->rx_dma = transfer->rx_dma;
+	drv_data->tx_dma = transfer->tx_dma;
+	drv_data->len = transfer->len;
+	drv_data->write = drv_data->tx ? chip->write : null_writer;
+	drv_data->read = drv_data->rx ? chip->read : null_reader;
+	drv_data->cs_change = transfer->cs_change;
+
+	/* Change speed and bit per word on a per transfer */
+	if (transfer->speed_hz || transfer->bits_per_word) {
+
+		/* Disable clock */
+		write_SSCR0(chip->cr0 & ~SSCR0_SSE, reg);
+		cr0 = chip->cr0;
+		bits = chip->bits_per_word;
+		speed = chip->speed_hz;
+
+		if (transfer->speed_hz)
+			speed = transfer->speed_hz;
+
+		if (transfer->bits_per_word)
+			bits = transfer->bits_per_word;
+
+		if (reg == SSP1_VIRT)
+			clk_div = SSP1_SerClkDiv(speed);
+		else if (reg == SSP2_VIRT)
+			clk_div = SSP2_SerClkDiv(speed);
+		else if (reg == SSP3_VIRT)
+			clk_div = SSP3_SerClkDiv(speed);
+
+		if (bits <= 8) {
+			drv_data->n_bytes = 1;
+			drv_data->dma_width = DCMD_WIDTH1;
+			drv_data->read = drv_data->read != null_reader ?
+						u8_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u8_writer : null_writer;
+		} else if (bits <= 16) {
+			drv_data->n_bytes = 2;
+			drv_data->dma_width = DCMD_WIDTH2;
+			drv_data->read = drv_data->read != null_reader ?
+						u16_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u16_writer : null_writer;
+		} else if (bits <= 32) {
+			drv_data->n_bytes = 4;
+			drv_data->dma_width = DCMD_WIDTH4;
+			drv_data->read = drv_data->read != null_reader ?
+						u32_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u32_writer : null_writer;
+		}
+
+		cr0 = clk_div
+			| SSCR0_Motorola
+			| SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
+			| SSCR0_SSE
+			| (bits > 16 ? SSCR0_EDSS : 0);
+
+		/* Start it back up */
+		write_SSCR0(cr0, reg);
+	}
+
+	message->state = RUNNING_STATE;
+
+	/* Try to map dma buffer and do a dma transfer if successful */
+	if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+
+		/* Ensure we have the correct interrupt handler */
+		drv_data->transfer_handler = dma_transfer;
+
+		/* Setup rx DMA Channel */
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
+		DTADR(drv_data->rx_channel) = drv_data->rx_dma;
+		if (drv_data->rx == drv_data->null_dma_buf)
+			/* No target address increment */
+			DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
+							| DCMD_FLOWSRC
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Setup tx DMA Channel */
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->tx_channel) = drv_data->tx_dma;
+		DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
+		if (drv_data->tx == drv_data->null_dma_buf)
+			/* No source address increment */
+			DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
+							| DCMD_FLOWTRG
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Enable dma end irqs on SSP to detect end of transfer */
+		if (drv_data->ssp_type == PXA25x_SSP)
+			DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->rx_channel) |= DCSR_RUN;
+		DCSR(drv_data->tx_channel) |= DCSR_RUN;
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->dma_threshold
+				| drv_data->dma_cr1,
+				reg);
+	} else {
+		/* Ensure we have the correct interrupt handler	*/
+		drv_data->transfer_handler = interrupt_transfer;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->threshold
+				| drv_data->int_cr1,
+				reg);
+	}
+}
+
+static void pump_messages(void *data)
+{
+	struct driver_data *drv_data = data;
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
+		drv_data->busy = 0;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Make sure we are not already running a message */
+	if (drv_data->cur_msg) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Extract head of queue */
+	drv_data->cur_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+	list_del_init(&drv_data->cur_msg->queue);
+
+	/* Initial message state*/
+	drv_data->cur_msg->state = START_STATE;
+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+						struct spi_transfer,
+						transfer_list);
+
+	/* Setup the SSP using the per chip configuration */
+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+	restore_state(drv_data);
+
+	/* Mark as busy and launch transfers */
+	tasklet_schedule(&drv_data->pump_transfers);
+
+	drv_data->busy = 1;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = START_STATE;
+
+	list_add_tail(&msg->queue, &drv_data->queue);
+
+	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return 0;
+}
+
+static int setup(struct spi_device *spi)
+{
+	struct pxa2xx_spi_chip *chip_info = NULL;
+	struct chip_data *chip;
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned int clk_div;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if (drv_data->ssp_type != PXA25x_SSP
+			&& (spi->bits_per_word < 4 || spi->bits_per_word > 32))
+		return -EINVAL;
+	else if (spi->bits_per_word < 4 || spi->bits_per_word > 16)
+		return -EINVAL;
+
+	/* Only alloc (or use chip_info) on first setup */
+	chip = spi_get_ctldata(spi);
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+
+		chip->cs_control = null_cs_control;
+		chip->enable_dma = 0;
+		chip->timeout = SSP_TIMEOUT(1000);
+		chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
+		chip->dma_burst_size = drv_data->master_info->enable_dma ?
+					DCMD_BURST8 : 0;
+
+		chip_info = spi->controller_data;
+	}
+
+	/* chip_info isn't always needed */
+	if (chip_info) {
+		if (chip_info->cs_control)
+			chip->cs_control = chip_info->cs_control;
+
+		chip->timeout = SSP_TIMEOUT(chip_info->timeout_microsecs);
+
+		chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
+					| SSCR1_TxTresh(chip_info->tx_threshold);
+
+		chip->enable_dma = chip_info->dma_burst_size != 0
+					&& drv_data->master_info->enable_dma;
+		chip->dma_threshold = 0;
+
+		if (chip->enable_dma) {
+			if (chip_info->dma_burst_size <= 8) {
+				chip->dma_threshold = SSCR1_RxTresh(8)
+							| SSCR1_TxTresh(8);
+				chip->dma_burst_size = DCMD_BURST8;
+			} else if (chip_info->dma_burst_size <= 16) {
+				chip->dma_threshold = SSCR1_RxTresh(16)
+							| SSCR1_TxTresh(16);
+				chip->dma_burst_size = DCMD_BURST16;
+			} else {
+				chip->dma_threshold = SSCR1_RxTresh(32)
+							| SSCR1_TxTresh(32);
+				chip->dma_burst_size = DCMD_BURST32;
+			}
+		}
+
+
+		if (chip_info->enable_loopback)
+			chip->cr1 = SSCR1_LBM;
+	}
+
+	if (drv_data->ioaddr == SSP1_VIRT)
+		clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP2_VIRT)
+		clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP3_VIRT)
+		clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
+	else
+		return -ENODEV;
+	chip->speed_hz = spi->max_speed_hz;
+
+	chip->cr0 = clk_div
+			| SSCR0_Motorola
+			| SSCR0_DataSize(spi->bits_per_word > 16 ?
+				spi->bits_per_word - 16 : spi->bits_per_word)
+			| SSCR0_SSE
+			| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
+	chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
+			| (((spi->mode & SPI_CPOL) != 0) << 3);
+
+	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
+	if (drv_data->ssp_type != PXA25x_SSP)
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+	else
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ/2)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+
+	if (spi->bits_per_word <= 8) {
+		chip->n_bytes = 1;
+		chip->dma_width = DCMD_WIDTH1;
+		chip->read = u8_reader;
+		chip->write = u8_writer;
+	} else if (spi->bits_per_word <= 16) {
+		chip->n_bytes = 2;
+		chip->dma_width = DCMD_WIDTH2;
+		chip->read = u16_reader;
+		chip->write = u16_writer;
+	} else if (spi->bits_per_word <= 32) {
+		chip->cr0 |= SSCR0_EDSS;
+		chip->n_bytes = 4;
+		chip->dma_width = DCMD_WIDTH4;
+		chip->read = u32_reader;
+		chip->write = u32_writer;
+	} else {
+		dev_err(&spi->dev, "invalid wordsize\n");
+		kfree(chip);
+		return -ENODEV;
+	}
+	chip->bits_per_word = spi->bits_per_word;
+
+	spi_set_ctldata(spi, chip);
+
+	return 0;
+}
+
+static void cleanup(const struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+	kfree(chip);
+}
+
+static int init_queue(struct driver_data *drv_data)
+{
+	INIT_LIST_HEAD(&drv_data->queue);
+	spin_lock_init(&drv_data->lock);
+
+	drv_data->run = QUEUE_STOPPED;
+	drv_data->busy = 0;
+
+	tasklet_init(&drv_data->pump_transfers,
+			pump_transfers,	(unsigned long)drv_data);
+
+	INIT_WORK(&drv_data->pump_messages, pump_messages, drv_data);
+	drv_data->workqueue = create_singlethread_workqueue(
+					drv_data->master->cdev.dev->bus_id);
+	if (drv_data->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int start_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -EBUSY;
+	}
+
+	drv_data->run = QUEUE_RUNNING;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	return 0;
+}
+
+static int stop_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the drv_data->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	drv_data->run = QUEUE_STOPPED;
+	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&drv_data->lock, flags);
+	}
+
+	if (!list_empty(&drv_data->queue) || drv_data->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct driver_data *drv_data)
+{
+	int status;
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(drv_data->workqueue);
+
+	return 0;
+}
+
+static int pxa2xx_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pxa2xx_spi_master *platform_info;
+	struct spi_master *master;
+	struct driver_data *drv_data = 0;
+	struct resource *memory_resource;
+	int irq;
+	int status = 0;
+
+	platform_info = dev->platform_data;
+
+	if (platform_info->ssp_type == SSP_UNDEFINED) {
+		dev_err(&pdev->dev, "undefined SSP\n");
+		return -ENODEV;
+	}
+
+	/* Allocate master with space for drv_data and null dma buffer */
+	master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
+	if (!master) {
+		dev_err(&pdev->dev, "can not alloc spi_master\n");
+		return -ENOMEM;
+	}
+	drv_data = spi_master_get_devdata(master);
+	drv_data->master = master;
+	drv_data->master_info = platform_info;
+	drv_data->pdev = pdev;
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = cleanup;
+	master->setup = setup;
+	master->transfer = transfer;
+
+	drv_data->ssp_type = platform_info->ssp_type;
+	drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
+						sizeof(struct driver_data)), 8);
+
+	/* Setup register addresses */
+	memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memory_resource) {
+		dev_err(&pdev->dev, "memory resources not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
+	drv_data->ssdr_physical = memory_resource->start + 0x00000010;
+	if (platform_info->ssp_type == PXA25x_SSP) {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
+		drv_data->dma_cr1 = 0;
+		drv_data->clear_sr = SSSR_ROR;
+		drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	} else {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
+		drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
+		drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
+		drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	}
+
+	/* Attach to IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "irq resource not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can not get IRQ\n");
+		goto out_error_master_alloc;
+	}
+
+	/* Setup DMA if requested */
+	drv_data->tx_channel = -1;
+	drv_data->rx_channel = -1;
+	if (platform_info->enable_dma) {
+
+		/* Get two DMA channels	(rx and tx) */
+		drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
+							DMA_PRIO_HIGH,
+							dma_handler,
+							drv_data);
+		if (drv_data->rx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting rx channel\n",
+				drv_data->rx_channel);
+			status = -ENODEV;
+			goto out_error_irq_alloc;
+		}
+		drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
+							DMA_PRIO_MEDIUM,
+							dma_handler,
+							drv_data);
+		if (drv_data->tx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting tx channel\n",
+				drv_data->tx_channel);
+			status = -ENODEV;
+			goto out_error_dma_alloc;
+		}
+
+		if (drv_data->ioaddr == SSP1_VIRT) {
+				DRCMRRXSSDR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSSDR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+				DRCMRRXSS2DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS2DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+				DRCMRRXSS3DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS3DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else {
+			dev_err(dev, "bad SSP type\n");
+			goto out_error_dma_alloc;
+		}
+	}
+
+	/* Enable SOC clock */
+	pxa_set_cken(platform_info->clock_enable, 1);
+
+	/* Load default SSP configuration */
+	write_SSCR0(0, drv_data->ioaddr);
+	write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr);
+	write_SSCR0(SSCR0_SerClkDiv(2)
+			| SSCR0_Motorola
+			| SSCR0_DataSize(8),
+			drv_data->ioaddr);
+	if (drv_data->ssp_type != PXA25x_SSP)
+		write_SSTO(0, drv_data->ioaddr);
+	write_SSPSP(0, drv_data->ioaddr);
+
+	/* Initial and start queue */
+	status = init_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem initializing queue\n");
+		goto out_error_clock_enabled;
+	}
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue\n");
+		goto out_error_clock_enabled;
+	}
+
+	/* Register with the SPI framework */
+	platform_set_drvdata(pdev, drv_data);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem registering spi master\n");
+		goto out_error_queue_alloc;
+	}
+
+	return status;
+
+out_error_queue_alloc:
+	destroy_queue(drv_data);
+
+out_error_clock_enabled:
+	pxa_set_cken(platform_info->clock_enable, 0);
+
+out_error_dma_alloc:
+	if (drv_data->tx_channel != -1)
+		pxa_free_dma(drv_data->tx_channel);
+	if (drv_data->rx_channel != -1)
+		pxa_free_dma(drv_data->rx_channel);
+
+out_error_irq_alloc:
+	free_irq(irq, drv_data);
+
+out_error_master_alloc:
+	spi_master_put(master);
+	return status;
+}
+
+static int pxa2xx_spi_remove(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int irq;
+	int status = 0;
+
+	if (!drv_data)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	/* Disable the SSP at the peripheral and SOC level */
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	/* Release DMA */
+	if (drv_data->master_info->enable_dma) {
+		if (drv_data->ioaddr == SSP1_VIRT) {
+			DRCMRRXSSDR = 0;
+			DRCMRTXSSDR = 0;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+			DRCMRRXSS2DR = 0;
+			DRCMRTXSS2DR = 0;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+			DRCMRRXSS3DR = 0;
+			DRCMRTXSS3DR = 0;
+		}
+		pxa_free_dma(drv_data->tx_channel);
+		pxa_free_dma(drv_data->rx_channel);
+	}
+
+	/* Release IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0)
+		free_irq(irq, drv_data);
+
+	/* Disconnect from the SPI framework */
+	spi_unregister_master(drv_data->master);
+
+	/* Prevent double remove */
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static void pxa2xx_spi_shutdown(struct platform_device *pdev)
+{
+	int status = 0;
+
+	if ((status = pxa2xx_spi_remove(pdev)) != 0)
+		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
+}
+
+#ifdef CONFIG_PM
+static int suspend_devices(struct device *dev, void *pm_message)
+{
+	pm_message_t *state = pm_message;
+
+	if (dev->power.power_state.event != state->event) {
+		dev_warn(dev, "pm state does not match request\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Check all childern for current power state */
+	if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) {
+		dev_warn(&pdev->dev, "suspend aborted\n");
+		return -1;
+	}
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	return 0;
+}
+
+static int pxa2xx_spi_resume(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Enable the SSP clock */
+	pxa_set_cken(drv_data->master_info->clock_enable, 1);
+
+	/* Start the queue running */
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		return status;
+	}
+
+	return 0;
+}
+#else
+#define pxa2xx_spi_suspend NULL
+#define pxa2xx_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver driver = {
+	.driver = {
+		.name = "pxa2xx-spi",
+		.bus = &platform_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe = pxa2xx_spi_probe,
+	.remove = __devexit_p(pxa2xx_spi_remove),
+	.shutdown = pxa2xx_spi_shutdown,
+	.suspend = pxa2xx_spi_suspend,
+	.resume = pxa2xx_spi_resume,
+};
+
+static int __init pxa2xx_spi_init(void)
+{
+	platform_driver_register(&driver);
+
+	return 0;
+}
+module_init(pxa2xx_spi_init);
+
+static void __exit pxa2xx_spi_exit(void)
+{
+	platform_driver_unregister(&driver);
+}
+module_exit(pxa2xx_spi_exit);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 94f5e8ed83a..1cea4a6799f 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -338,18 +338,18 @@ static struct class spi_master_class = {
  * spi_alloc_master - allocate SPI master controller
  * @dev: the controller, possibly using the platform_bus
  * @size: how much driver-private data to preallocate; the pointer to this
- * 	memory is in the class_data field of the returned class_device,
+ *	memory is in the class_data field of the returned class_device,
  *	accessible with spi_master_get_devdata().
  *
  * This call is used only by SPI master controller drivers, which are the
  * only ones directly touching chip registers.  It's how they allocate
- * an spi_master structure, prior to calling spi_add_master().
+ * an spi_master structure, prior to calling spi_register_master().
  *
  * This must be called from context that can sleep.  It returns the SPI
  * master structure on success, else NULL.
  *
  * The caller is responsible for assigning the bus number and initializing
- * the master's methods before calling spi_add_master(); and (after errors
+ * the master's methods before calling spi_register_master(); and (after errors
  * adding the device) calling spi_master_put() to prevent a memory leak.
  */
 struct spi_master * __init_or_module
@@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master);
 int __init_or_module
 spi_register_master(struct spi_master *master)
 {
-	static atomic_t		dyn_bus_id = ATOMIC_INIT(0);
+	static atomic_t		dyn_bus_id = ATOMIC_INIT((1<<16) - 1);
 	struct device		*dev = master->cdev.dev;
 	int			status = -ENODEV;
 	int			dynamic = 0;
@@ -404,7 +404,7 @@ spi_register_master(struct spi_master *master)
 		return -ENODEV;
 
 	/* convention:  dynamically assigned bus IDs count down from the max */
-	if (master->bus_num == 0) {
+	if (master->bus_num < 0) {
 		master->bus_num = atomic_dec_return(&dyn_bus_id);
 		dynamic = 1;
 	}
@@ -522,7 +522,8 @@ int spi_sync(struct spi_device *spi, struct spi_message *message)
 }
 EXPORT_SYMBOL_GPL(spi_sync);
 
-#define	SPI_BUFSIZ	(SMP_CACHE_BYTES)
+/* portable code must never pass more than 32 bytes */
+#define	SPI_BUFSIZ	max(32,SMP_CACHE_BYTES)
 
 static u8	*buf;
 
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index f037e559326..dd2f950b21a 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -138,6 +138,45 @@ static unsigned bitbang_txrx_32(
 	return t->len - count;
 }
 
+int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct spi_bitbang_cs	*cs = spi->controller_state;
+	u8			bits_per_word;
+	u32			hz;
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	} else {
+		bits_per_word = 0;
+		hz = 0;
+	}
+
+	/* spi_transfer level calls that work per-word */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+	if (bits_per_word <= 8)
+		cs->txrx_bufs = bitbang_txrx_8;
+	else if (bits_per_word <= 16)
+		cs->txrx_bufs = bitbang_txrx_16;
+	else if (bits_per_word <= 32)
+		cs->txrx_bufs = bitbang_txrx_32;
+	else
+		return -EINVAL;
+
+	/* nsecs = (clock period)/2 */
+	if (!hz)
+		hz = spi->max_speed_hz;
+	if (hz) {
+		cs->nsecs = (1000000000/2) / hz;
+		if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer);
+
 /**
  * spi_bitbang_setup - default setup for per-word I/O loops
  */
@@ -145,8 +184,16 @@ int spi_bitbang_setup(struct spi_device *spi)
 {
 	struct spi_bitbang_cs	*cs = spi->controller_state;
 	struct spi_bitbang	*bitbang;
+	int			retval;
 
-	if (!spi->max_speed_hz)
+	bitbang = spi_master_get_devdata(spi->master);
+
+	/* REVISIT: some systems will want to support devices using lsb-first
+	 * bit encodings on the wire.  In pure software that would be trivial,
+	 * just bitbang_txrx_le_cphaX() routines shifting the other way, and
+	 * some hardware controllers also have this support.
+	 */
+	if ((spi->mode & SPI_LSB_FIRST) != 0)
 		return -EINVAL;
 
 	if (!cs) {
@@ -155,32 +202,20 @@ int spi_bitbang_setup(struct spi_device *spi)
 			return -ENOMEM;
 		spi->controller_state = cs;
 	}
-	bitbang = spi_master_get_devdata(spi->master);
 
 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;
 
-	/* spi_transfer level calls that work per-word */
-	if (spi->bits_per_word <= 8)
-		cs->txrx_bufs = bitbang_txrx_8;
-	else if (spi->bits_per_word <= 16)
-		cs->txrx_bufs = bitbang_txrx_16;
-	else if (spi->bits_per_word <= 32)
-		cs->txrx_bufs = bitbang_txrx_32;
-	else
-		return -EINVAL;
-
 	/* per-word shift register access, in hardware or bitbanging */
 	cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
 	if (!cs->txrx_word)
 		return -EINVAL;
 
-	/* nsecs = (clock period)/2 */
-	cs->nsecs = (1000000000/2) / (spi->max_speed_hz);
-	if (cs->nsecs > MAX_UDELAY_MS * 1000)
-		return -EINVAL;
+	retval = spi_bitbang_setup_transfer(spi, NULL);
+	if (retval < 0)
+		return retval;
 
-	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
 			__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
 			spi->bits_per_word, 2 * cs->nsecs);
 
@@ -246,6 +281,8 @@ static void bitbang_work(void *_bitbang)
 		unsigned		tmp;
 		unsigned		cs_change;
 		int			status;
+		int			(*setup_transfer)(struct spi_device *,
+						struct spi_transfer *);
 
 		m = container_of(bitbang->queue.next, struct spi_message,
 				queue);
@@ -262,6 +299,7 @@ static void bitbang_work(void *_bitbang)
 		tmp = 0;
 		cs_change = 1;
 		status = 0;
+		setup_transfer = NULL;
 
 		list_for_each_entry (t, &m->transfers, transfer_list) {
 			if (bitbang->shutdown) {
@@ -269,6 +307,20 @@ static void bitbang_work(void *_bitbang)
 				break;
 			}
 
+			/* override or restore speed and wordsize */
+			if (t->speed_hz || t->bits_per_word) {
+				setup_transfer = bitbang->setup_transfer;
+				if (!setup_transfer) {
+					status = -ENOPROTOOPT;
+					break;
+				}
+			}
+			if (setup_transfer) {
+				status = setup_transfer(spi, t);
+				if (status < 0)
+					break;
+			}
+
 			/* set up default clock polarity, and activate chip;
 			 * this implicitly updates clock and spi modes as
 			 * previously recorded for this device via setup().
@@ -325,6 +377,10 @@ static void bitbang_work(void *_bitbang)
 		m->status = status;
 		m->complete(m->context);
 
+		/* restore speed and wordsize */
+		if (setup_transfer)
+			setup_transfer(spi, NULL);
+
 		/* normally deactivate chipselect ... unless no error and
 		 * cs_change has hinted that the next message will probably
 		 * be for this chip too.
@@ -348,6 +404,7 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
 {
 	struct spi_bitbang	*bitbang;
 	unsigned long		flags;
+	int			status = 0;
 
 	m->actual_length = 0;
 	m->status = -EINPROGRESS;
@@ -357,11 +414,15 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
 		return -ESHUTDOWN;
 
 	spin_lock_irqsave(&bitbang->lock, flags);
-	list_add_tail(&m->queue, &bitbang->queue);
-	queue_work(bitbang->workqueue, &bitbang->work);
+	if (!spi->max_speed_hz)
+		status = -ENETDOWN;
+	else {
+		list_add_tail(&m->queue, &bitbang->queue);
+		queue_work(bitbang->workqueue, &bitbang->work);
+	}
 	spin_unlock_irqrestore(&bitbang->lock, flags);
 
-	return 0;
+	return status;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
 
@@ -406,6 +467,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
 		if (!bitbang->master->setup) {
+			if (!bitbang->setup_transfer)
+				bitbang->setup_transfer =
+					 spi_bitbang_setup_transfer;
 			bitbang->master->setup = spi_bitbang_setup;
 			bitbang->master->cleanup = spi_bitbang_cleanup;
 		}
diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c
index ff9e5faa4dc..a006a1ee27a 100644
--- a/drivers/spi/spi_butterfly.c
+++ b/drivers/spi/spi_butterfly.c
@@ -321,6 +321,7 @@ static void butterfly_attach(struct parport *p)
 	 * (firmware resets at45, acts as spi slave) or neither (we ignore
 	 * both, AVR uses AT45).  Here we expect firmware for the first option.
 	 */
+
 	pp->info[0].max_speed_hz = 15 * 1000 * 1000;
 	strcpy(pp->info[0].modalias, "mtd_dataflash");
 	pp->info[0].platform_data = &flash;
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
new file mode 100644
index 00000000000..5d92a7e5cb4
--- /dev/null
+++ b/drivers/spi/spi_mpc83xx.c
@@ -0,0 +1,483 @@
+/*
+ * MPC83xx SPI controller driver.
+ *
+ * Maintainer: Kumar Gala
+ *
+ * Copyright (C) 2006 Polycom, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+/* SPI Controller registers */
+struct mpc83xx_spi_reg {
+	u8 res1[0x20];
+	__be32 mode;
+	__be32 event;
+	__be32 mask;
+	__be32 command;
+	__be32 transmit;
+	__be32 receive;
+};
+
+/* SPI Controller mode register definitions */
+#define	SPMODE_CI_INACTIVEHIGH	(1 << 29)
+#define	SPMODE_CP_BEGIN_EDGECLK	(1 << 28)
+#define	SPMODE_DIV16		(1 << 27)
+#define	SPMODE_REV		(1 << 26)
+#define	SPMODE_MS		(1 << 25)
+#define	SPMODE_ENABLE		(1 << 24)
+#define	SPMODE_LEN(x)		((x) << 20)
+#define	SPMODE_PM(x)		((x) << 16)
+
+/*
+ * Default for SPI Mode:
+ * 	SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk
+ */
+#define	SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \
+			 SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf))
+
+/* SPIE register values */
+#define	SPIE_NE		0x00000200	/* Not empty */
+#define	SPIE_NF		0x00000100	/* Not full */
+
+/* SPIM register values */
+#define	SPIM_NE		0x00000200	/* Not empty */
+#define	SPIM_NF		0x00000100	/* Not full */
+
+/* SPI Controller driver's private data. */
+struct mpc83xx_spi {
+	/* bitbang has to be first */
+	struct spi_bitbang bitbang;
+	struct completion done;
+
+	struct mpc83xx_spi_reg __iomem *base;
+
+	/* rx & tx bufs from the spi_transfer */
+	const void *tx;
+	void *rx;
+
+	/* functions to deal with different sized buffers */
+	void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
+	u32(*get_tx) (struct mpc83xx_spi *);
+
+	unsigned int count;
+	u32 irq;
+
+	unsigned nsecs;		/* (clock cycle time)/2 */
+
+	u32 sysclk;
+	void (*activate_cs) (u8 cs, u8 polarity);
+	void (*deactivate_cs) (u8 cs, u8 polarity);
+};
+
+static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+{
+	out_be32(reg, val);
+}
+
+static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
+{
+	return in_be32(reg);
+}
+
+#define MPC83XX_SPI_RX_BUF(type) 					  \
+void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
+{									  \
+	type * rx = mpc83xx_spi->rx;					  \
+	*rx++ = (type)data;						  \
+	mpc83xx_spi->rx = rx;						  \
+}
+
+#define MPC83XX_SPI_TX_BUF(type)				\
+u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi)	\
+{								\
+	u32 data;						\
+	const type * tx = mpc83xx_spi->tx;			\
+	data = *tx++;						\
+	mpc83xx_spi->tx = tx;					\
+	return data;						\
+}
+
+MPC83XX_SPI_RX_BUF(u8)
+MPC83XX_SPI_RX_BUF(u16)
+MPC83XX_SPI_RX_BUF(u32)
+MPC83XX_SPI_TX_BUF(u8)
+MPC83XX_SPI_TX_BUF(u16)
+MPC83XX_SPI_TX_BUF(u32)
+
+static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (value == BITBANG_CS_INACTIVE) {
+		if (mpc83xx_spi->deactivate_cs)
+			mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
+	}
+
+	if (value == BITBANG_CS_ACTIVE) {
+		u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+		u32 len = spi->bits_per_word;
+		if (len == 32)
+			len = 0;
+		else
+			len = len - 1;
+
+		/* mask out bits we are going to set */
+		regval &= ~0x38ff0000;
+
+		if (spi->mode & SPI_CPHA)
+			regval |= SPMODE_CP_BEGIN_EDGECLK;
+		if (spi->mode & SPI_CPOL)
+			regval |= SPMODE_CI_INACTIVEHIGH;
+
+		regval |= SPMODE_LEN(len);
+
+		if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
+			u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+			regval |= SPMODE_PM(pm) | SPMODE_DIV16;
+		} else {
+			u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
+			regval |= SPMODE_PM(pm);
+		}
+
+		mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+		if (mpc83xx_spi->activate_cs)
+			mpc83xx_spi->activate_cs(spi->chip_select, pol);
+	}
+}
+
+static
+int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u32 regval;
+	u8 bits_per_word;
+	u32 hz;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	} else {
+		bits_per_word = 0;
+		hz = 0;
+	}
+
+	/* spi_transfer level calls that work per-word */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+
+	/* Make sure its a bit width we support [4..16, 32] */
+	if ((bits_per_word < 4)
+	    || ((bits_per_word > 16) && (bits_per_word != 32)))
+		return -EINVAL;
+
+	if (bits_per_word <= 8) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+	} else if (bits_per_word <= 16) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+	} else if (bits_per_word <= 32) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
+	} else
+		return -EINVAL;
+
+	/* nsecs = (clock period)/2 */
+	if (!hz)
+		hz = spi->max_speed_hz;
+	mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
+	if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
+		return -EINVAL;
+
+	if (bits_per_word == 32)
+		bits_per_word = 0;
+	else
+		bits_per_word = bits_per_word - 1;
+
+	regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+
+	/* Mask out bits_per_wordgth */
+	regval &= 0xff0fffff;
+	regval |= SPMODE_LEN(bits_per_word);
+
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+	return 0;
+}
+
+static int mpc83xx_spi_setup(struct spi_device *spi)
+{
+	struct spi_bitbang *bitbang;
+	struct mpc83xx_spi *mpc83xx_spi;
+	int retval;
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	bitbang = spi_master_get_devdata(spi->master);
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	retval = mpc83xx_spi_setup_transfer(spi, NULL);
+	if (retval < 0)
+		return retval;
+
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+		__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+		spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
+
+	/* NOTE we _need_ to call chipselect() early, ideally with adapter
+	 * setup, unless the hardware defaults cooperate to avoid confusion
+	 * between normal (active low) and inverted chipselects.
+	 */
+
+	/* deselect chip (low or high) */
+	spin_lock(&bitbang->lock);
+	if (!bitbang->busy) {
+		bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+		ndelay(mpc83xx_spi->nsecs);
+	}
+	spin_unlock(&bitbang->lock);
+
+	return 0;
+}
+
+static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u32 word;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	mpc83xx_spi->tx = t->tx_buf;
+	mpc83xx_spi->rx = t->rx_buf;
+	mpc83xx_spi->count = t->len;
+	INIT_COMPLETION(mpc83xx_spi->done);
+
+	/* enable rx ints */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+
+	/* transmit word */
+	word = mpc83xx_spi->get_tx(mpc83xx_spi);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+
+	wait_for_completion(&mpc83xx_spi->done);
+
+	/* disable rx ints */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+
+	return t->len - mpc83xx_spi->count;
+}
+
+irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data,
+			    struct pt_regs * ptregs)
+{
+	struct mpc83xx_spi *mpc83xx_spi = context_data;
+	u32 event;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* Get interrupt events(tx/rx) */
+	event = mpc83xx_spi_read_reg(&mpc83xx_spi->base->event);
+
+	/* We need handle RX first */
+	if (event & SPIE_NE) {
+		u32 rx_data = mpc83xx_spi_read_reg(&mpc83xx_spi->base->receive);
+
+		if (mpc83xx_spi->rx)
+			mpc83xx_spi->get_rx(rx_data, mpc83xx_spi);
+
+		ret = IRQ_HANDLED;
+	}
+
+	if ((event & SPIE_NF) == 0)
+		/* spin until TX is done */
+		while (((event =
+			 mpc83xx_spi_read_reg(&mpc83xx_spi->base->event)) &
+						SPIE_NF) == 0)
+			 cpu_relax();
+
+	mpc83xx_spi->count -= 1;
+	if (mpc83xx_spi->count) {
+		if (mpc83xx_spi->tx) {
+			u32 word = mpc83xx_spi->get_tx(mpc83xx_spi);
+			mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit,
+					      word);
+		}
+	} else {
+		complete(&mpc83xx_spi->done);
+	}
+
+	/* Clear the events */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, event);
+
+	return ret;
+}
+
+static int __init mpc83xx_spi_probe(struct platform_device *dev)
+{
+	struct spi_master *master;
+	struct mpc83xx_spi *mpc83xx_spi;
+	struct fsl_spi_platform_data *pdata;
+	struct resource *r;
+	u32 regval;
+	int ret = 0;
+
+	/* Get resources(memory, IRQ) associated with the device */
+	master = spi_alloc_master(&dev->dev, sizeof(struct mpc83xx_spi));
+
+	if (master == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	platform_set_drvdata(dev, master);
+	pdata = dev->dev.platform_data;
+
+	if (pdata == NULL) {
+		ret = -ENODEV;
+		goto free_master;
+	}
+
+	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		ret = -ENODEV;
+		goto free_master;
+	}
+
+	mpc83xx_spi = spi_master_get_devdata(master);
+	mpc83xx_spi->bitbang.master = spi_master_get(master);
+	mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
+	mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
+	mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
+	mpc83xx_spi->sysclk = pdata->sysclk;
+	mpc83xx_spi->activate_cs = pdata->activate_cs;
+	mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
+	mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+	mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+
+	mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
+	init_completion(&mpc83xx_spi->done);
+
+	mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
+	if (mpc83xx_spi->base == NULL) {
+		ret = -ENOMEM;
+		goto put_master;
+	}
+
+	mpc83xx_spi->irq = platform_get_irq(dev, 0);
+
+	if (mpc83xx_spi->irq < 0) {
+		ret = -ENXIO;
+		goto unmap_io;
+	}
+
+	/* Register for SPI Interrupt */
+	ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
+			  0, "mpc83xx_spi", mpc83xx_spi);
+
+	if (ret != 0)
+		goto unmap_io;
+
+	master->bus_num = pdata->bus_num;
+	master->num_chipselect = pdata->max_chipselect;
+
+	/* SPI controller initializations */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->command, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, 0xffffffff);
+
+	/* Enable SPI interface */
+	regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+	ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
+
+	if (ret != 0)
+		goto free_irq;
+
+	printk(KERN_INFO
+	       "%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
+	       dev->dev.bus_id, mpc83xx_spi->base, mpc83xx_spi->irq);
+
+	return ret;
+
+free_irq:
+	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+unmap_io:
+	iounmap(mpc83xx_spi->base);
+put_master:
+	spi_master_put(master);
+free_master:
+	kfree(master);
+err:
+	return ret;
+}
+
+static int __devexit mpc83xx_spi_remove(struct platform_device *dev)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	struct spi_master *master;
+
+	master = platform_get_drvdata(dev);
+	mpc83xx_spi = spi_master_get_devdata(master);
+
+	spi_bitbang_stop(&mpc83xx_spi->bitbang);
+	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+	iounmap(mpc83xx_spi->base);
+	spi_master_put(mpc83xx_spi->bitbang.master);
+
+	return 0;
+}
+
+static struct platform_driver mpc83xx_spi_driver = {
+	.probe = mpc83xx_spi_probe,
+	.remove = __devexit_p(mpc83xx_spi_remove),
+	.driver = {
+		   .name = "mpc83xx_spi",
+	},
+};
+
+static int __init mpc83xx_spi_init(void)
+{
+	return platform_driver_register(&mpc83xx_spi_driver);
+}
+
+static void __exit mpc83xx_spi_exit(void)
+{
+	platform_driver_unregister(&mpc83xx_spi_driver);
+}
+
+module_init(mpc83xx_spi_init);
+module_exit(mpc83xx_spi_exit);
+
+MODULE_AUTHOR("Kumar Gala");
+MODULE_DESCRIPTION("Simple MPC83xx SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
new file mode 100644
index 00000000000..5fc14563ee3
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx.c
@@ -0,0 +1,453 @@
+/* linux/drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-spi.h>
+#include <asm/arch/spi.h>
+
+struct s3c24xx_spi {
+	/* bitbang has to be first */
+	struct spi_bitbang	 bitbang;
+	struct completion	 done;
+
+	void __iomem		*regs;
+	int			 irq;
+	int			 len;
+	int			 count;
+
+	/* data buffers */
+	const unsigned char	*tx;
+	unsigned char		*rx;
+
+	struct clk		*clk;
+	struct resource		*ioarea;
+	struct spi_master	*master;
+	struct spi_device	*curdev;
+	struct device		*dev;
+	struct s3c2410_spi_info *pdata;
+};
+
+#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
+#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
+
+static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
+{
+	return spi_master_get_devdata(sdev->master);
+}
+
+static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+	unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+	unsigned int spcon;
+
+	switch (value) {
+	case BITBANG_CS_INACTIVE:
+		if (hw->pdata->set_cs)
+			hw->pdata->set_cs(hw->pdata, value, cspol);
+		else
+			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+		break;
+
+	case BITBANG_CS_ACTIVE:
+		spcon = readb(hw->regs + S3C2410_SPCON);
+
+		if (spi->mode & SPI_CPHA)
+			spcon |= S3C2410_SPCON_CPHA_FMTB;
+		else
+			spcon &= ~S3C2410_SPCON_CPHA_FMTB;
+
+		if (spi->mode & SPI_CPOL)
+			spcon |= S3C2410_SPCON_CPOL_HIGH;
+		else
+			spcon &= ~S3C2410_SPCON_CPOL_HIGH;
+
+		spcon |= S3C2410_SPCON_ENSCK;
+
+		/* write new configration */
+
+		writeb(spcon, hw->regs + S3C2410_SPCON);
+
+		if (hw->pdata->set_cs)
+			hw->pdata->set_cs(hw->pdata, value, cspol);
+		else
+			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+
+		break;
+
+	}
+}
+
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+	unsigned int bpw;
+	unsigned int hz;
+	unsigned int div;
+
+	bpw = t ? t->bits_per_word : spi->bits_per_word;
+	hz  = t ? t->speed_hz : spi->max_speed_hz;
+
+	if (bpw != 8) {
+		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+		return -EINVAL;
+	}
+
+	div = clk_get_rate(hw->clk) / hz;
+
+	/* is clk = pclk / (2 * (pre+1)), or is it
+	 *    clk = (pclk * 2) / ( pre + 1) */
+
+	div = (div / 2) - 1;
+
+	if (div < 0)
+		div = 1;
+
+	if (div > 255)
+		div = 255;
+
+	dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+	writeb(div, hw->regs + S3C2410_SPPRE);
+
+	spin_lock(&hw->bitbang.lock);
+	if (!hw->bitbang.busy) {
+		hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+		/* need to ndelay for 0.5 clocktick ? */
+	}
+	spin_unlock(&hw->bitbang.lock);
+
+	return 0;
+}
+
+static int s3c24xx_spi_setup(struct spi_device *spi)
+{
+	int ret;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if ((spi->mode & SPI_LSB_FIRST) != 0)
+		return -EINVAL;
+
+	ret = s3c24xx_spi_setupxfer(spi, NULL);
+	if (ret < 0) {
+		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
+		__FUNCTION__, spi->mode, spi->bits_per_word,
+		spi->max_speed_hz);
+
+	return 0;
+}
+
+static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
+{
+	return hw->tx ? hw->tx[count] : 0xff;
+}
+
+static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+
+	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+		t->tx_buf, t->rx_buf, t->len);
+
+	hw->tx = t->tx_buf;
+	hw->rx = t->rx_buf;
+	hw->len = t->len;
+	hw->count = 0;
+
+	/* send the first byte */
+	writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
+	wait_for_completion(&hw->done);
+
+	return hw->count;
+}
+
+static irqreturn_t s3c24xx_spi_irq(int irq, void *dev, struct pt_regs *regs)
+{
+	struct s3c24xx_spi *hw = dev;
+	unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
+	unsigned int count = hw->count;
+
+	if (spsta & S3C2410_SPSTA_DCOL) {
+		dev_dbg(hw->dev, "data-collision\n");
+		complete(&hw->done);
+		goto irq_done;
+	}
+
+	if (!(spsta & S3C2410_SPSTA_READY)) {
+		dev_dbg(hw->dev, "spi not ready for tx?\n");
+		complete(&hw->done);
+		goto irq_done;
+	}
+
+	hw->count++;
+
+	if (hw->rx)
+		hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
+
+	count++;
+
+	if (count < hw->len)
+		writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
+	else
+		complete(&hw->done);
+
+ irq_done:
+	return IRQ_HANDLED;
+}
+
+static int s3c24xx_spi_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_spi *hw;
+	struct spi_master *master;
+	struct spi_board_info *bi;
+	struct resource *res;
+	int err = 0;
+	int i;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "No memory for spi_master\n");
+		err = -ENOMEM;
+		goto err_nomem;
+	}
+
+	hw = spi_master_get_devdata(master);
+	memset(hw, 0, sizeof(struct s3c24xx_spi));
+
+	hw->master = spi_master_get(master);
+	hw->pdata = pdev->dev.platform_data;
+	hw->dev = &pdev->dev;
+
+	if (hw->pdata == NULL) {
+		dev_err(&pdev->dev, "No platform data supplied\n");
+		err = -ENOENT;
+		goto err_no_pdata;
+	}
+
+	platform_set_drvdata(pdev, hw);
+	init_completion(&hw->done);
+
+	/* setup the state for the bitbang driver */
+
+	hw->bitbang.master         = hw->master;
+	hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
+	hw->bitbang.chipselect     = s3c24xx_spi_chipsel;
+	hw->bitbang.txrx_bufs      = s3c24xx_spi_txrx;
+	hw->bitbang.master->setup  = s3c24xx_spi_setup;
+
+	dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
+
+	/* find and map our resources */
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+		err = -ENOENT;
+		goto err_no_iores;
+	}
+
+	hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
+					pdev->name);
+
+	if (hw->ioarea == NULL) {
+		dev_err(&pdev->dev, "Cannot reserve region\n");
+		err = -ENXIO;
+		goto err_no_iores;
+	}
+
+	hw->regs = ioremap(res->start, (res->end - res->start)+1);
+	if (hw->regs == NULL) {
+		dev_err(&pdev->dev, "Cannot map IO\n");
+		err = -ENXIO;
+		goto err_no_iomap;
+	}
+
+	hw->irq = platform_get_irq(pdev, 0);
+	if (hw->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ specified\n");
+		err = -ENOENT;
+		goto err_no_irq;
+	}
+
+	err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto err_no_irq;
+	}
+
+	hw->clk = clk_get(&pdev->dev, "spi");
+	if (IS_ERR(hw->clk)) {
+		dev_err(&pdev->dev, "No clock for device\n");
+		err = PTR_ERR(hw->clk);
+		goto err_no_clk;
+	}
+
+	/* for the moment, permanently enable the clock */
+
+	clk_enable(hw->clk);
+
+	/* program defaults into the registers */
+
+	writeb(0xff, hw->regs + S3C2410_SPPRE);
+	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+	/* setup any gpio we can */
+
+	if (!hw->pdata->set_cs) {
+		s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
+		s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+	}
+
+	/* register our spi controller */
+
+	err = spi_bitbang_start(&hw->bitbang);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to register SPI master\n");
+		goto err_register;
+	}
+
+	dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
+
+	/* register all the devices associated */
+
+	bi = &hw->pdata->board_info[0];
+	for (i = 0; i < hw->pdata->board_size; i++, bi++) {
+		dev_info(hw->dev, "registering %s\n", bi->modalias);
+
+		bi->controller_data = hw;
+		spi_new_device(master, bi);
+	}
+
+	return 0;
+
+ err_register:
+	clk_disable(hw->clk);
+	clk_put(hw->clk);
+
+ err_no_clk:
+	free_irq(hw->irq, hw);
+
+ err_no_irq:
+	iounmap(hw->regs);
+
+ err_no_iomap:
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
+
+ err_no_iores:
+ err_no_pdata:
+	spi_master_put(hw->master);;
+
+ err_nomem:
+	return err;
+}
+
+static int s3c24xx_spi_remove(struct platform_device *dev)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	spi_unregister_master(hw->master);
+
+	clk_disable(hw->clk);
+	clk_put(hw->clk);
+
+	free_irq(hw->irq, hw);
+	iounmap(hw->regs);
+
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
+
+	spi_master_put(hw->master);
+	return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+
+	clk_disable(hw->clk);
+	return 0;
+}
+
+static int s3c24xx_spi_resume(struct platform_device *pdev)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+
+	clk_enable(hw->clk);
+	return 0;
+}
+
+#else
+#define s3c24xx_spi_suspend NULL
+#define s3c24xx_spi_resume  NULL
+#endif
+
+static struct platform_driver s3c24xx_spidrv = {
+	.probe		= s3c24xx_spi_probe,
+	.remove		= s3c24xx_spi_remove,
+	.suspend	= s3c24xx_spi_suspend,
+	.resume		= s3c24xx_spi_resume,
+	.driver		= {
+		.name	= "s3c2410-spi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init s3c24xx_spi_init(void)
+{
+        return platform_driver_register(&s3c24xx_spidrv);
+}
+
+static void __exit s3c24xx_spi_exit(void)
+{
+        platform_driver_unregister(&s3c24xx_spidrv);
+}
+
+module_init(s3c24xx_spi_init);
+module_exit(s3c24xx_spi_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
new file mode 100644
index 00000000000..aacdceb8f44
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -0,0 +1,188 @@
+/* linux/drivers/spi/spi_s3c24xx_gpio.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *
+ * S3C24XX GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/hardware.h>
+
+struct s3c2410_spigpio {
+	struct spi_bitbang		 bitbang;
+
+	struct s3c2410_spigpio_info	*info;
+	struct platform_device		*dev;
+};
+
+static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
+{
+	return spi->controller_data;
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define	EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+
+static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+
+	if (sg->info && sg->info->chip_select)
+		(sg->info->chip_select)(sg->info, value);
+}
+
+static int s3c2410_spigpio_probe(struct platform_device *dev)
+{
+	struct spi_master	*master;
+	struct s3c2410_spigpio  *sp;
+	int ret;
+	int i;
+
+	master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio));
+	if (master == NULL) {
+		dev_err(&dev->dev, "failed to allocate spi master\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	sp = spi_master_get_devdata(master);
+
+	platform_set_drvdata(dev, sp);
+
+	/* copy in the plkatform data */
+	sp->info = dev->dev.platform_data;
+
+	/* setup spi bitbang adaptor */
+	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
+
+	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+	sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+
+	/* set state of spi pins */
+	s3c2410_gpio_setpin(sp->info->pin_clk, 0);
+	s3c2410_gpio_setpin(sp->info->pin_mosi, 0);
+
+	s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT);
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (ret)
+		goto err_no_bitbang;
+
+	/* register the chips to go with the board */
+
+	for (i = 0; i < sp->info->board_size; i++) {
+		dev_info(&dev->dev, "registering %p: %s\n",
+			 &sp->info->board_info[i],
+			 sp->info->board_info[i].modalias);
+
+		sp->info->board_info[i].controller_data = sp;
+		spi_new_device(master, sp->info->board_info + i);
+	}
+
+	return 0;
+
+ err_no_bitbang:
+	spi_master_put(sp->bitbang.master);
+ err:
+	return ret;
+
+}
+
+static int s3c2410_spigpio_remove(struct platform_device *dev)
+{
+	struct s3c2410_spigpio *sp = platform_get_drvdata(dev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+/* all gpio should be held over suspend/resume, so we should
+ * not need to deal with this
+*/
+
+#define s3c2410_spigpio_suspend NULL
+#define s3c2410_spigpio_resume NULL
+
+
+static struct platform_driver s3c2410_spigpio_drv = {
+	.probe		= s3c2410_spigpio_probe,
+        .remove		= s3c2410_spigpio_remove,
+        .suspend	= s3c2410_spigpio_suspend,
+        .resume		= s3c2410_spigpio_resume,
+        .driver		= {
+		.name	= "s3c24xx-spi-gpio",
+		.owner	= THIS_MODULE,
+        },
+};
+
+static int __init s3c2410_spigpio_init(void)
+{
+        return platform_driver_register(&s3c2410_spigpio_drv);
+}
+
+static void __exit s3c2410_spigpio_exit(void)
+{
+        platform_driver_unregister(&s3c2410_spigpio_drv);
+}
+
+module_init(s3c2410_spigpio_init);
+module_exit(s3c2410_spigpio_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 7860c8a5800..956b7a1e8af 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch";
 #define RESUBMIT_DELAY		1000	/* milliseconds */
 
 #define DEFAULT_BULK_ALTSETTING	1
-#define DEFAULT_ISOC_ALTSETTING	2
+#define DEFAULT_ISOC_ALTSETTING	3
 #define DEFAULT_DL_512_FIRST	0
 #define DEFAULT_ENABLE_ISOC	0
 #define DEFAULT_SW_BUFFERING	0
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 830d2c98267..b38990adf1c 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -68,7 +68,7 @@
 
 #include "usbatm.h"
 
-#define EAGLEUSBVERSION "ueagle 1.2"
+#define EAGLEUSBVERSION "ueagle 1.3"
 
 
 /*
@@ -243,7 +243,7 @@ enum {
 #define BULK_TIMEOUT 300
 #define CTRL_TIMEOUT 1000
 
-#define ACK_TIMEOUT msecs_to_jiffies(1500)
+#define ACK_TIMEOUT msecs_to_jiffies(3000)
 
 #define UEA_INTR_IFACE_NO 	0
 #define UEA_US_IFACE_NO		1
@@ -314,6 +314,10 @@ struct cmv {
 	 ((d) & 0xff) << 16 |						\
 	 ((a) & 0xff) << 8  |						\
 	 ((b) & 0xff))
+#define GETSA1(a) ((a >> 8) & 0xff)
+#define GETSA2(a) (a & 0xff)
+#define GETSA3(a) ((a >> 24) & 0xff)
+#define GETSA4(a) ((a >> 16) & 0xff)
 
 #define SA_CNTL MAKESA('C', 'N', 'T', 'L')
 #define SA_DIAG MAKESA('D', 'I', 'A', 'G')
@@ -728,11 +732,12 @@ bad2:
 	uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
 	return;
 bad1:
-	uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n",pageno);
+	uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
 }
 
 static inline void wake_up_cmv_ack(struct uea_softc *sc)
 {
+	BUG_ON(sc->cmv_ack);
 	sc->cmv_ack = 1;
 	wake_up(&sc->cmv_ack_wait);
 }
@@ -743,6 +748,9 @@ static inline int wait_cmv_ack(struct uea_softc *sc)
 						   sc->cmv_ack, ACK_TIMEOUT);
 	sc->cmv_ack = 0;
 
+	uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
+			jiffies_to_msecs(ret));
+
 	if (ret < 0)
 		return ret;
 
@@ -791,6 +799,12 @@ static int uea_cmv(struct uea_softc *sc,
 	struct cmv cmv;
 	int ret;
 
+	uea_enters(INS_TO_USBDEV(sc));
+	uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
+			"offset : 0x%04x, data : 0x%08x\n",
+			FUNCTION_TYPE(function), FUNCTION_SUBTYPE(function),
+			GETSA1(address), GETSA2(address), GETSA3(address),
+			GETSA4(address), offset, data);
 	/* we send a request, but we expect a reply */
 	sc->cmv_function = function | 0x2;
 	sc->cmv_idx++;
@@ -808,7 +822,9 @@ static int uea_cmv(struct uea_softc *sc,
 	ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv);
 	if (ret < 0)
 		return ret;
-	return wait_cmv_ack(sc);
+	ret = wait_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
 }
 
 static inline int uea_read_cmv(struct uea_softc *sc,
@@ -922,7 +938,7 @@ static int uea_stat(struct uea_softc *sc)
 	 * we check the status again in order to detect the failure earlier
 	 */
 	if (sc->stats.phy.flags) {
-		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = %d\n",
+		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
 		       sc->stats.phy.flags);
 		return 0;
 	}
@@ -1063,7 +1079,13 @@ static int uea_start_reset(struct uea_softc *sc)
 	uea_enters(INS_TO_USBDEV(sc));
 	uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
 
+	/* mask interrupt */
 	sc->booting = 1;
+	/* We need to set this here because, a ack timeout could have occured,
+	 * but before we start the reboot, the ack occurs and set this to 1.
+	 * So we will failed to wait Ready CMV.
+	 */
+	sc->cmv_ack = 0;
 	UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST);
 
 	/* reset statistics */
@@ -1089,6 +1111,7 @@ static int uea_start_reset(struct uea_softc *sc)
 
 	msleep(1000);
 	sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY);
+	/* demask interrupt */
 	sc->booting = 0;
 
 	/* start loading DSP */
@@ -1101,6 +1124,8 @@ static int uea_start_reset(struct uea_softc *sc)
 	if (ret < 0)
 		return ret;
 
+	uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
+
 	/* Enter in R-IDLE (cmv) until instructed otherwise */
 	ret = uea_write_cmv(sc, SA_CNTL, 0, 1);
 	if (ret < 0)
@@ -1121,6 +1146,7 @@ static int uea_start_reset(struct uea_softc *sc)
 	}
 	/* Enter in R-ACT-REQ */
 	ret = uea_write_cmv(sc, SA_CNTL, 0, 2);
+	uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
 out:
 	release_firmware(cmvs_fw);
 	sc->reset = 0;
@@ -1235,6 +1261,7 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
 
 	if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) {
 		wake_up_cmv_ack(sc);
+		uea_leaves(INS_TO_USBDEV(sc));
 		return;
 	}
 
@@ -1249,6 +1276,7 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
 	sc->data = sc->data << 16 | sc->data >> 16;
 
 	wake_up_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
 	return;
 
 bad2:
@@ -1256,12 +1284,14 @@ bad2:
 			"Function : %d, Subfunction : %d\n",
 			FUNCTION_TYPE(cmv->bFunction),
 			FUNCTION_SUBTYPE(cmv->bFunction));
+	uea_leaves(INS_TO_USBDEV(sc));
 	return;
 
 bad1:
 	uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
 			"wPreamble %d, bDirection %d\n",
 			le16_to_cpu(cmv->wPreamble), cmv->bDirection);
+	uea_leaves(INS_TO_USBDEV(sc));
 }
 
 /*
@@ -1346,7 +1376,7 @@ static int uea_boot(struct uea_softc *sc)
 	if (ret < 0) {
 		uea_err(INS_TO_USBDEV(sc),
 		       "urb submition failed with error %d\n", ret);
-		goto err1;
+		goto err;
 	}
 
 	sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
@@ -1360,10 +1390,10 @@ static int uea_boot(struct uea_softc *sc)
 
 err2:
 	usb_kill_urb(sc->urb_int);
-err1:
-	kfree(intr);
 err:
 	usb_free_urb(sc->urb_int);
+	sc->urb_int = NULL;
+	kfree(intr);
 	uea_leaves(INS_TO_USBDEV(sc));
 	return -ENOMEM;
 }
@@ -1508,7 +1538,7 @@ static ssize_t read_##name(struct device *dev, 			\
 	int ret = -ENODEV; 					\
 	struct uea_softc *sc; 					\
  								\
-	mutex_lock(&uea_mutex); 					\
+	mutex_lock(&uea_mutex); 				\
 	sc = dev_to_uea(dev);					\
 	if (!sc) 						\
 		goto out; 					\
@@ -1516,7 +1546,7 @@ static ssize_t read_##name(struct device *dev, 			\
 	if (reset)						\
 		sc->stats.phy.name = 0;				\
 out: 								\
-	mutex_unlock(&uea_mutex); 					\
+	mutex_unlock(&uea_mutex); 				\
 	return ret; 						\
 } 								\
 								\
@@ -1643,7 +1673,7 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
 
 	sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
 	if (!sc) {
-		uea_err(INS_TO_USBDEV(sc), "uea_init: not enough memory !\n");
+		uea_err(usb, "uea_init: not enough memory !\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index c1211fc037d..546249843b8 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm";
 
 #define UDSL_MAX_RCV_URBS		16
 #define UDSL_MAX_SND_URBS		16
-#define UDSL_MAX_BUF_SIZE		64 * 1024	/* bytes */
+#define UDSL_MAX_BUF_SIZE		65536
 #define UDSL_DEFAULT_RCV_URBS		4
 #define UDSL_DEFAULT_SND_URBS		4
-#define UDSL_DEFAULT_RCV_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
-#define UDSL_DEFAULT_SND_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
+#define UDSL_DEFAULT_RCV_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
 
 #define ATM_CELL_HEADER			(ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
 
@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
 module_param(snd_buf_bytes, uint, S_IRUGO);
 MODULE_PARM_DESC(snd_buf_bytes,
 		 "Size of the buffers used for transmission, in bytes (range: 1-"
-		 __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
+		 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
 		 __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
 
 
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index ff03184da40..a08787e253a 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -99,4 +99,11 @@ config USB_OTG_WHITELIST
 	  normal Linux-USB hosts do (other than the warning), and is
 	  convenient for many stages of product development.
 
+config USB_OTG_BLACKLIST_HUB
+	bool "Disable external hubs"
+	depends on USB_OTG
+	help
+	  If you say Y here, then Linux will refuse to enumerate
+	  external hubs.  OTG hosts are allowed to reduce hardware
+	  and software costs by not supporting external hubs.
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 0d2193b6923..66b78404ab3 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -213,11 +213,9 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 
 	if (hcd->driver->suspend) {
 		retval = hcd->driver->suspend(hcd, message);
-		if (retval) {
-			dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
-				retval);
+		suspend_report_result(hcd->driver->suspend, retval);
+		if (retval)
 			goto done;
-		}
 	}
 	synchronize_irq(dev->irq);
 
@@ -263,6 +261,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 		 * some device state (e.g. as part of clock reinit).
 		 */
 		retval = pci_set_power_state (dev, PCI_D3hot);
+		suspend_report_result(pci_set_power_state, retval);
 		if (retval == 0) {
 			int wake = device_can_wakeup(&hcd->self.root_hub->dev);
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fbd938d4ea5..e2e00ba4e1e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			USB_SPEED_FULL;
 	hcd->self.root_hub = rhdev;
 
+	/* wakeup flag init defaults to "everything works" for root hubs,
+	 * but drivers can override it in reset() if needed, along with
+	 * recording the overall controller's system wakeup capability.
+	 */
+	device_init_wakeup(&rhdev->dev, 1);
+
 	/* "reset" is misnamed; its role is now one-time init. the controller
 	 * should already have been reset (and boot firmware kicked off etc).
 	 */
@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		goto err_hcd_driver_setup;
 	}
 
-	/* wakeup flag init is in transition; for now we can't rely on PCI to
-	 * initialize these bits properly, so we let reset() override it.
-	 * This init should _precede_ the reset() once PCI behaves.
-	 */
-	device_init_wakeup(&rhdev->dev,
-			device_can_wakeup(hcd->self.controller));
-
 	/* NOTE: root hub and controller capabilities may not be the same */
 	if (device_can_wakeup(hcd->self.controller)
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8e65f7a237e..90b8d43c6b3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -836,6 +836,13 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
+#ifdef	CONFIG_USB_OTG_BLACKLIST_HUB
+	if (hdev->parent) {
+		dev_warn(&intf->dev, "ignoring external hub\n");
+		return -ENODEV;
+	}
+#endif
+
 	/* Some hubs have a subclass of 1, which AFAICT according to the */
 	/*  specs is not defined, but it works */
 	if ((desc->desc.bInterfaceSubClass != 0) &&
@@ -1022,7 +1029,6 @@ void usb_set_device_state(struct usb_device *udev,
 		recursively_mark_NOTATTACHED(udev);
 	spin_unlock_irqrestore(&device_state_lock, flags);
 }
-EXPORT_SYMBOL(usb_set_device_state);
 
 
 #ifdef CONFIG_PM
@@ -1162,19 +1168,9 @@ static inline const char *plural(int n)
 static int choose_configuration(struct usb_device *udev)
 {
 	int i;
-	u16 devstatus;
-	int bus_powered;
 	int num_configs;
 	struct usb_host_config *c, *best;
 
-	/* If this fails, assume the device is bus-powered */
-	devstatus = 0;
-	usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-	le16_to_cpus(&devstatus);
-	bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
-	dev_dbg(&udev->dev, "device is %s-powered\n",
-			bus_powered ? "bus" : "self");
-
 	best = NULL;
 	c = udev->config;
 	num_configs = udev->descriptor.bNumConfigurations;
@@ -1191,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev)
 		 * similar errors in their descriptors.  If the next test
 		 * were allowed to execute, such configurations would always
 		 * be rejected and the devices would not work as expected.
+		 * In the meantime, we run the risk of selecting a config
+		 * that requires external power at a time when that power
+		 * isn't available.  It seems to be the lesser of two evils.
+		 *
+		 * Bugzilla #6448 reports a device that appears to crash
+		 * when it receives a GET_DEVICE_STATUS request!  We don't
+		 * have any other way to tell whether a device is self-powered,
+		 * but since we don't use that information anywhere but here,
+		 * the call has been removed.
+		 *
+		 * Maybe the GET_DEVICE_STATUS call and the test below can
+		 * be reinstated when device firmwares become more reliable.
+		 * Don't hold your breath.
 		 */
 #if 0
 		/* Rule out self-powered configs for a bus-powered device */
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index d7352aa73b5..b7fdc1cd134 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1194,7 +1194,6 @@ EXPORT_SYMBOL(usb_disabled);
 EXPORT_SYMBOL_GPL(usb_get_intf);
 EXPORT_SYMBOL_GPL(usb_put_intf);
 
-EXPORT_SYMBOL(usb_alloc_dev);
 EXPORT_SYMBOL(usb_put_dev);
 EXPORT_SYMBOL(usb_get_dev);
 EXPORT_SYMBOL(usb_hub_tt_clear_buffer);
@@ -1208,7 +1207,6 @@ EXPORT_SYMBOL(usb_ifnum_to_if);
 EXPORT_SYMBOL(usb_altnum_to_altsetting);
 
 EXPORT_SYMBOL(usb_reset_device);
-EXPORT_SYMBOL(usb_disconnect);
 
 EXPORT_SYMBOL(__usb_get_extra_descriptor);
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index d80f71877d6..363b2ad74ae 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -69,11 +69,11 @@ choice
 	   often need board-specific hooks.
 
 config USB_GADGET_NET2280
-	boolean "NetChip 2280"
+	boolean "NetChip 228x"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
-	   NetChip 2280 is a PCI based USB peripheral controller which
+	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
 	   supports both full and high speed USB 2.0 data transfers.  
 	   
 	   It has six configurable endpoints, as well as endpoint zero
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 865858cfd1c..b8d0b7825bf 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1709,7 +1709,7 @@ static int __devexit at91udc_remove(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
-static int at91udc_suspend(struct platform_device *dev, u32 state, u32 level)
+static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg)
 {
 	struct at91_udc *udc = platform_get_drvdata(dev);
 
@@ -1731,7 +1731,7 @@ static int at91udc_suspend(struct platform_device *dev, u32 state, u32 level)
 	return 0;
 }
 
-static int at91udc_resume(struct platform_device *dev, u32 level)
+static int at91udc_resume(struct platform_device *dev)
 {
 	struct at91_udc *udc = platform_get_drvdata(dev);
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index c3d8e5c5bf2..9c4422ac9de 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2338,6 +2338,9 @@ autoconf_fail:
 		hs_subset_descriptors();
 	}
 
+	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+	usb_gadget_set_selfpowered (gadget);
+
 	/* For now RNDIS is always a second config */
 	if (rndis)
 		device_desc.bNumConfigurations = 2;
@@ -2361,9 +2364,6 @@ autoconf_fail:
 #endif
 #endif	/* DUALSPEED */
 
-	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-	usb_gadget_set_selfpowered (gadget);
-
 	if (gadget->is_otg) {
 		otg_descriptor.bmAttributes |= USB_OTG_HNP,
 		eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index cf3be299e35..6f887478b14 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -71,6 +71,12 @@
  * requirement amounts to two 16K buffers, size configurable by a parameter.
  * Support is included for both full-speed and high-speed operation.
  *
+ * Note that the driver is slightly non-portable in that it assumes a
+ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
+ * interrupt-in endpoints.  With most device controllers this isn't an
+ * issue, but there may be some with hardware restrictions that prevent
+ * a buffer from being used by more than one endpoint.
+ *
  * Module options:
  *
  *	file=filename[,filename...]
@@ -108,6 +114,14 @@
  * setting are not allowed when the medium is loaded.
  *
  * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
+ * The driver's SCSI command interface was based on the "Information
+ * technology - Small Computer System Interface - 2" document from
+ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
+ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.  The single exception
+ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
+ * "Universal Serial Bus Mass Storage Class UFI Command Specification"
+ * document, Revision 1.0, December 14, 1998, available at
+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
  */
 
 
@@ -334,11 +348,9 @@ MODULE_LICENSE("Dual BSD/GPL");
 
 #define MAX_LUNS	8
 
-	/* Arggh!  There should be a module_param_array_named macro! */
-static char		*file[MAX_LUNS];
-static int		ro[MAX_LUNS];
-
 static struct {
+	char		*file[MAX_LUNS];
+	int		ro[MAX_LUNS];
 	int		num_filenames;
 	int		num_ros;
 	unsigned int	nluns;
@@ -370,10 +382,11 @@ static struct {
 	};
 
 
-module_param_array(file, charp, &mod_data.num_filenames, S_IRUGO);
+module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
+		S_IRUGO);
 MODULE_PARM_DESC(file, "names of backing files or devices");
 
-module_param_array(ro, bool, &mod_data.num_ros, S_IRUGO);
+module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
 MODULE_PARM_DESC(ro, "true to force read-only");
 
 module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
@@ -1795,6 +1808,7 @@ static int do_write(struct fsg_dev *fsg)
 			 * the bulk-out maxpacket size */
 			bh->outreq->length = bh->bulk_out_intended_length =
 					amount;
+			bh->outreq->short_not_ok = 1;
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -2398,6 +2412,7 @@ static int throw_away_data(struct fsg_dev *fsg)
 			 * the bulk-out maxpacket size */
 			bh->outreq->length = bh->bulk_out_intended_length =
 					amount;
+			bh->outreq->short_not_ok = 1;
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -3029,6 +3044,7 @@ static int get_next_command(struct fsg_dev *fsg)
 
 		/* Queue a request to read a Bulk-only CBW */
 		set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
+		bh->outreq->short_not_ok = 1;
 		start_transfer(fsg, fsg->bulk_out, bh->outreq,
 				&bh->outreq_busy, &bh->state);
 
@@ -3859,7 +3875,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 
 	for (i = 0; i < fsg->nluns; ++i) {
 		curlun = &fsg->luns[i];
-		curlun->ro = ro[i];
+		curlun->ro = mod_data.ro[i];
 		curlun->dev.parent = &gadget->dev;
 		curlun->dev.driver = &fsg_driver.driver;
 		dev_set_drvdata(&curlun->dev, fsg);
@@ -3876,8 +3892,9 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 			kref_get(&fsg->ref);
 		}
 
-		if (file[i] && *file[i]) {
-			if ((rc = open_backing_file(curlun, file[i])) != 0)
+		if (mod_data.file[i] && *mod_data.file[i]) {
+			if ((rc = open_backing_file(curlun,
+					mod_data.file[i])) != 0)
 				goto out;
 		} else if (!mod_data.removable) {
 			ERROR(fsg, "no file given for LUN%d\n", i);
@@ -3953,6 +3970,9 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 	for (i = 0; i < NUM_BUFFERS; ++i) {
 		struct fsg_buffhd	*bh = &fsg->buffhds[i];
 
+		/* Allocate for the bulk-in endpoint.  We assume that
+		 * the buffer will also work with the bulk-out (and
+		 * interrupt-in) endpoint. */
 		bh->buf = usb_ep_alloc_buffer(fsg->bulk_in, mod_data.buflen,
 				&bh->dma, GFP_KERNEL);
 		if (!bh->buf)
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index c4081407171..aa80f091072 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -100,9 +100,9 @@
 #define gadget_is_musbhsfc(g)	0
 #endif
 
-/* Mentor high speed "dual role" controller, peripheral mode */
-#ifdef CONFIG_USB_GADGET_MUSBHDRC
-#define gadget_is_musbhdrc(g)	!strcmp("musbhdrc_udc", (g)->name)
+/* Mentor high speed "dual role" controller, in peripheral role */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+#define gadget_is_musbhdrc(g)	!strcmp("musb_hdrc", (g)->name)
 #else
 #define gadget_is_musbhdrc(g)	0
 #endif
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 3f618ce6998..0eb010a3f5b 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -810,7 +810,7 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 	case USB_SPEED_HIGH:
 		/* fails if caller didn't provide that descriptor... */
 		value = usb_ep_enable (ep, &data->hs_desc);
@@ -982,7 +982,7 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 			/* assume that was SET_CONFIGURATION */
 			if (dev->current_config) {
 				unsigned power;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 				if (dev->gadget->speed == USB_SPEED_HIGH)
 					power = dev->hs_config->bMaxPower;
 				else
@@ -1262,7 +1262,7 @@ static struct file_operations ep0_io_operations = {
  * Unrecognized ep0 requests may be handled in user space.
  */
 
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 static void make_qualifier (struct dev_data *dev)
 {
 	struct usb_qualifier_descriptor		qual;
@@ -1291,7 +1291,7 @@ static int
 config_buf (struct dev_data *dev, u8 type, unsigned index)
 {
 	int		len;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 	int		hs;
 #endif
 
@@ -1299,7 +1299,7 @@ config_buf (struct dev_data *dev, u8 type, unsigned index)
 	if (index > 0)
 		return -EINVAL;
 
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 	hs = (dev->gadget->speed == USB_SPEED_HIGH);
 	if (type == USB_DT_OTHER_SPEED_CONFIG)
 		hs = !hs;
@@ -1335,12 +1335,12 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		dev->state = STATE_CONNECTED;
 		dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
 
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 		if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) {
 			ERROR (dev, "no high speed config??\n");
 			return -EINVAL;
 		}
-#endif	/* HIGHSPEED */
+#endif	/* CONFIG_USB_GADGET_DUALSPEED */
 
 		INFO (dev, "connected\n");
 		event = next_event (dev, GADGETFS_CONNECT);
@@ -1352,11 +1352,11 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			/* ... down_trylock (&data->lock) ... */
 			if (data->state != STATE_EP_DEFER_ENABLE)
 				continue;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 			if (gadget->speed == USB_SPEED_HIGH)
 				value = usb_ep_enable (ep, &data->hs_desc);
 			else
-#endif	/* HIGHSPEED */
+#endif	/* CONFIG_USB_GADGET_DUALSPEED */
 				value = usb_ep_enable (ep, &data->desc);
 			if (value) {
 				ERROR (dev, "deferred %s enable --> %d\n",
@@ -1391,7 +1391,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			value = min (w_length, (u16) sizeof *dev->dev);
 			req->buf = dev->dev;
 			break;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 		case USB_DT_DEVICE_QUALIFIER:
 			if (!dev->hs_config)
 				break;
@@ -1428,7 +1428,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			// user mode expected to disable endpoints
 		} else {
 			u8	config, power;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 			if (gadget->speed == USB_SPEED_HIGH) {
 				config = dev->hs_config->bConfigurationValue;
 				power = dev->hs_config->bMaxPower;
@@ -1614,6 +1614,7 @@ static int activate_ep_files (struct dev_data *dev)
 				data, &ep_config_operations,
 				&data->dentry);
 		if (!data->inode) {
+			usb_ep_free_request(ep, data->req);
 			kfree (data);
 			goto enomem;
 		}
@@ -1728,7 +1729,7 @@ gadgetfs_suspend (struct usb_gadget *gadget)
 }
 
 static struct usb_gadget_driver gadgetfs_driver = {
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 	.speed		= USB_SPEED_HIGH,
 #else
 	.speed		= USB_SPEED_FULL,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index fb73dc10053..0b929349395 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -26,6 +26,8 @@
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003-2005 PLX Technology, Inc.
  *
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -71,8 +73,8 @@
 #include <asm/unaligned.h>
 
 
-#define	DRIVER_DESC		"PLX NET2280 USB Peripheral Controller"
-#define	DRIVER_VERSION		"2005 Feb 03"
+#define	DRIVER_DESC		"PLX NET228x USB Peripheral Controller"
+#define	DRIVER_VERSION		"2005 Sept 27"
 
 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
 #define	EP_DONTUSE		13	/* nonzero */
@@ -118,7 +120,7 @@ module_param (fifo_mode, ushort, 0644);
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
  * USB suspend requests will be ignored.  This is acceptible for
- * self-powered devices, and helps avoid some quirks.
+ * self-powered devices
  */
 static int enable_suspend = 0;
 
@@ -223,6 +225,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	ep->is_in = (tmp & USB_DIR_IN) != 0;
 	if (!ep->is_in)
 		writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+	else if (dev->pdev->device != 0x2280) {
+		/* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */
+		writel ((1 << CLEAR_NAK_OUT_PACKETS)
+			| (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
+	}
 
 	writel (tmp, &ep->regs->ep_cfg);
 
@@ -232,8 +239,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		writel (tmp, &dev->regs->pciirqenb0);
 
 		tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
-			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
-			| readl (&ep->regs->ep_irqenb);
+			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);
+		if (dev->pdev->device == 0x2280)
+			tmp |= readl (&ep->regs->ep_irqenb);
 		writel (tmp, &ep->regs->ep_irqenb);
 	} else {				/* dma, per-request */
 		tmp = (1 << (8 + ep->num));	/* completion */
@@ -314,10 +322,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
 	/* init to our chosen defaults, notably so that we NAK OUT
 	 * packets until the driver queues a read (+note erratum 0112)
 	 */
-	tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
+	if (!ep->is_in || ep->dev->pdev->device == 0x2280) {
+		tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
 		| (1 << SET_NAK_OUT_PACKETS)
 		| (1 << CLEAR_EP_HIDE_STATUS_PHASE)
 		| (1 << CLEAR_INTERRUPT_MODE);
+	} else {
+		/* added for 2282 */
+		tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+		| (1 << CLEAR_NAK_OUT_PACKETS)
+		| (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+		| (1 << CLEAR_INTERRUPT_MODE);
+	}
 
 	if (ep->num != 0) {
 		tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
@@ -326,14 +342,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
 	writel (tmp, &ep->regs->ep_rsp);
 
 	/* scrub most status bits, and flush any fifo state */
-	writel (  (1 << TIMEOUT)
+	if (ep->dev->pdev->device == 0x2280)
+		tmp = (1 << FIFO_OVERFLOW)
+			| (1 << FIFO_UNDERFLOW);
+	else
+		tmp = 0;
+
+	writel (tmp | (1 << TIMEOUT)
 		| (1 << USB_STALL_SENT)
 		| (1 << USB_IN_NAK_SENT)
 		| (1 << USB_IN_ACK_RCVD)
 		| (1 << USB_OUT_PING_NAK_SENT)
 		| (1 << USB_OUT_ACK_SENT)
-		| (1 << FIFO_OVERFLOW)
-		| (1 << FIFO_UNDERFLOW)
 		| (1 << FIFO_FLUSH)
 		| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
 		| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
@@ -718,7 +738,7 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid)
 	 */
 	if (ep->is_in)
 		dmacount |= (1 << DMA_DIRECTION);
-	else if ((dmacount % ep->ep.maxpacket) != 0)
+	if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)
 		dmacount |= (1 << END_OF_CHAIN);
 
 	req->valid = valid;
@@ -760,9 +780,12 @@ static inline void stop_dma (struct net2280_dma_regs __iomem *dma)
 static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
 {
 	struct net2280_dma_regs	__iomem *dma = ep->dma;
+	unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION);
+
+	if (ep->dev->pdev->device != 0x2280)
+		tmp |= (1 << END_OF_CHAIN);
 
-	writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),
-			&dma->dmacount);
+	writel (tmp, &dma->dmacount);
 	writel (readl (&dma->dmastat), &dma->dmastat);
 
 	writel (td_dma, &dma->dmadesc);
@@ -2110,7 +2133,11 @@ static void handle_ep_small (struct net2280_ep *ep)
 	VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",
 			ep->ep.name, t, req ? &req->req : 0);
 #endif
-	writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+	if (!ep->is_in || ep->dev->pdev->device == 0x2280)
+		writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+	else
+		/* Added for 2282 */
+		writel (t, &ep->regs->ep_stat);
 
 	/* for ep0, monitor token irqs to catch data stage length errors
 	 * and to synchronize on status.
@@ -2139,7 +2166,7 @@ static void handle_ep_small (struct net2280_ep *ep)
 					ep->stopped = 1;
 					set_halt (ep);
 					mode = 2;
-				} else if (!req && ep->stopped)
+				} else if (!req && !ep->stopped)
 					write_fifo (ep, NULL);
 			}
 		} else {
@@ -2214,7 +2241,8 @@ static void handle_ep_small (struct net2280_ep *ep)
 			if (likely (req)) {
 				req->td->dmacount = 0;
 				t = readl (&ep->regs->ep_avail);
-				dma_done (ep, req, count, t);
+				dma_done (ep, req, count,
+					(ep->out_overflow || t) ? -EOVERFLOW : 0);
 			}
 
 			/* also flush to prevent erratum 0106 trouble */
@@ -2252,9 +2280,7 @@ static void handle_ep_small (struct net2280_ep *ep)
 		/* if we wrote it all, we're usually done */
 		if (req->req.actual == req->req.length) {
 			if (ep->num == 0) {
-				/* wait for control status */
-				if (mode != 2)
-					req = NULL;
+				/* send zlps until the status stage */
 			} else if (!req->req.zero || len != ep->ep.maxpacket)
 				mode = 2;
 		}
@@ -2337,7 +2363,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			u32			raw [2];
 			struct usb_ctrlrequest	r;
 		} u;
-		int				tmp = 0;
+		int				tmp;
 		struct net2280_request		*req;
 
 		if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
@@ -2364,14 +2390,19 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 		}
 		ep->stopped = 0;
 		dev->protocol_stall = 0;
-		writel (  (1 << TIMEOUT)
+
+		if (ep->dev->pdev->device == 0x2280)
+			tmp = (1 << FIFO_OVERFLOW)
+				| (1 << FIFO_UNDERFLOW);
+		else
+			tmp = 0;
+
+		writel (tmp | (1 << TIMEOUT)
 			| (1 << USB_STALL_SENT)
 			| (1 << USB_IN_NAK_SENT)
 			| (1 << USB_IN_ACK_RCVD)
 			| (1 << USB_OUT_PING_NAK_SENT)
 			| (1 << USB_OUT_ACK_SENT)
-			| (1 << FIFO_OVERFLOW)
-			| (1 << FIFO_UNDERFLOW)
 			| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
 			| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
 			| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
@@ -2385,6 +2416,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 		cpu_to_le32s (&u.raw [0]);
 		cpu_to_le32s (&u.raw [1]);
 
+		tmp = 0;
+
 #define	w_value		le16_to_cpup (&u.r.wValue)
 #define	w_index		le16_to_cpup (&u.r.wIndex)
 #define	w_length	le16_to_cpup (&u.r.wLength)
@@ -2594,10 +2627,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
 		writel (stat, &dev->regs->irqstat1);
 
 	/* some status we can just ignore */
-	stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
-			| (1 << SUSPEND_REQUEST_INTERRUPT)
-			| (1 << RESUME_INTERRUPT)
-			| (1 << SOF_INTERRUPT));
+	if (dev->pdev->device == 0x2280)
+		stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+			  | (1 << SUSPEND_REQUEST_INTERRUPT)
+			  | (1 << RESUME_INTERRUPT)
+			  | (1 << SOF_INTERRUPT));
+	else
+		stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+			  | (1 << RESUME_INTERRUPT)
+			  | (1 << SOF_DOWN_INTERRUPT)
+			  | (1 << SOF_INTERRUPT));
+
 	if (!stat)
 		return;
 	// DEBUG (dev, "irqstat1 %08x\n", stat);
@@ -2702,6 +2742,10 @@ static irqreturn_t net2280_irq (int irq, void *_dev, struct pt_regs * r)
 {
 	struct net2280		*dev = _dev;
 
+	/* shared interrupt, not ours */
+	if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED)))
+		return IRQ_NONE;
+
 	spin_lock (&dev->lock);
 
 	/* handle disconnect, dma, and more */
@@ -2789,13 +2833,13 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* alloc, and start init */
-	dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+	dev = kzalloc (sizeof *dev, SLAB_KERNEL);
 	if (dev == NULL){
 		retval = -ENOMEM;
 		goto done;
 	}
 
-	memset (dev, 0, sizeof *dev);
+	pci_set_drvdata (pdev, dev);
 	spin_lock_init (&dev->lock);
 	dev->pdev = pdev;
 	dev->gadget.ops = &net2280_ops;
@@ -2908,7 +2952,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
 
 	/* done */
-	pci_set_drvdata (pdev, dev);
 	INFO (dev, "%s\n", driver_desc);
 	INFO (dev, "irq %s, pci mem %p, chip rev %04x\n",
 			bufp, base, dev->chiprev);
@@ -2939,6 +2982,13 @@ static struct pci_device_id pci_ids [] = { {
 	.device =	0x2280,
 	.subvendor =	PCI_ANY_ID,
 	.subdevice =	PCI_ANY_ID,
+}, {
+	.class = 	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+	.class_mask = 	~0,
+	.vendor =	0x17cc,
+	.device =	0x2282,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
 
 }, { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index fff4509cf34..957d6df3401 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -22,420 +22,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-/*-------------------------------------------------------------------------*/
-
-/* NET2280 MEMORY MAPPED REGISTERS
- *
- * The register layout came from the chip documentation, and the bit
- * number definitions were extracted from chip specification.
- *
- * Use the shift operator ('<<') to build bit masks, with readl/writel
- * to access the registers through PCI.
- */
-
-/* main registers, BAR0 + 0x0000 */
-struct net2280_regs {
-	// offset 0x0000
-	u32		devinit;
-#define     LOCAL_CLOCK_FREQUENCY                               8
-#define     FORCE_PCI_RESET                                     7
-#define     PCI_ID                                              6
-#define     PCI_ENABLE                                          5
-#define     FIFO_SOFT_RESET                                     4
-#define     CFG_SOFT_RESET                                      3
-#define     PCI_SOFT_RESET                                      2
-#define     USB_SOFT_RESET                                      1
-#define     M8051_RESET                                         0
-	u32		eectl;
-#define     EEPROM_ADDRESS_WIDTH                                23
-#define     EEPROM_CHIP_SELECT_ACTIVE                           22
-#define     EEPROM_PRESENT                                      21
-#define     EEPROM_VALID                                        20
-#define     EEPROM_BUSY                                         19
-#define     EEPROM_CHIP_SELECT_ENABLE                           18
-#define     EEPROM_BYTE_READ_START                              17
-#define     EEPROM_BYTE_WRITE_START                             16
-#define     EEPROM_READ_DATA                                    8
-#define     EEPROM_WRITE_DATA                                   0
-	u32		eeclkfreq;
-	u32		_unused0;
-	// offset 0x0010
-
-	u32		pciirqenb0;		/* interrupt PCI master ... */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
-	u32		pciirqenb1;
-#define     PCI_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE          18
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-	u32		cpu_irqenb0;		/* ... or onboard 8051 */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
-	u32		cpu_irqenb1;
-#define     CPU_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-
-	// offset 0x0020
-	u32		_unused1;
-	u32		usbirqenb1;
-#define     USB_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-	u32		irqstat0;
-#define     INTA_ASSERTED                                       12
-#define     SETUP_PACKET_INTERRUPT                              7
-#define     ENDPOINT_F_INTERRUPT                                6
-#define     ENDPOINT_E_INTERRUPT                                5
-#define     ENDPOINT_D_INTERRUPT                                4
-#define     ENDPOINT_C_INTERRUPT                                3
-#define     ENDPOINT_B_INTERRUPT                                2
-#define     ENDPOINT_A_INTERRUPT                                1
-#define     ENDPOINT_0_INTERRUPT                                0
-	u32		irqstat1;
-#define     POWER_STATE_CHANGE_INTERRUPT                        27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
-#define     PCI_PARITY_ERROR_INTERRUPT                          25
-#define     PCI_INTA_INTERRUPT                                  24
-#define     PCI_PME_INTERRUPT                                   23
-#define     PCI_SERR_INTERRUPT                                  22
-#define     PCI_PERR_INTERRUPT                                  21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT                 20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
-#define     PCI_RETRY_ABORT_INTERRUPT                           17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
-#define     GPIO_INTERRUPT                                      13
-#define     DMA_D_INTERRUPT                                     12
-#define     DMA_C_INTERRUPT                                     11
-#define     DMA_B_INTERRUPT                                     10
-#define     DMA_A_INTERRUPT                                     9
-#define     EEPROM_DONE_INTERRUPT                               8
-#define     VBUS_INTERRUPT                                      7
-#define     CONTROL_STATUS_INTERRUPT                            6
-#define     ROOT_PORT_RESET_INTERRUPT                           4
-#define     SUSPEND_REQUEST_INTERRUPT                           3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT                    2
-#define     RESUME_INTERRUPT                                    1
-#define     SOF_INTERRUPT                                       0
-	// offset 0x0030
-	u32		idxaddr;
-	u32		idxdata;
-	u32		fifoctl;
-#define     PCI_BASE2_RANGE                                     16
-#define     IGNORE_FIFO_AVAILABILITY                            3
-#define     PCI_BASE2_SELECT                                    2
-#define     FIFO_CONFIGURATION_SELECT                           0
-	u32		_unused2;
-	// offset 0x0040
-	u32		memaddr;
-#define     START                                               28
-#define     DIRECTION                                           27
-#define     FIFO_DIAGNOSTIC_SELECT                              24
-#define     MEMORY_ADDRESS                                      0
-	u32		memdata0;
-	u32		memdata1;
-	u32		_unused3;
-	// offset 0x0050
-	u32		gpioctl;
-#define     GPIO3_LED_SELECT                                    12
-#define     GPIO3_INTERRUPT_ENABLE                              11
-#define     GPIO2_INTERRUPT_ENABLE                              10
-#define     GPIO1_INTERRUPT_ENABLE                              9
-#define     GPIO0_INTERRUPT_ENABLE                              8
-#define     GPIO3_OUTPUT_ENABLE                                 7
-#define     GPIO2_OUTPUT_ENABLE                                 6
-#define     GPIO1_OUTPUT_ENABLE                                 5
-#define     GPIO0_OUTPUT_ENABLE                                 4
-#define     GPIO3_DATA                                          3
-#define     GPIO2_DATA                                          2
-#define     GPIO1_DATA                                          1
-#define     GPIO0_DATA                                          0
-	u32		gpiostat;
-#define     GPIO3_INTERRUPT                                     3
-#define     GPIO2_INTERRUPT                                     2
-#define     GPIO1_INTERRUPT                                     1
-#define     GPIO0_INTERRUPT                                     0
-} __attribute__ ((packed));
-
-/* usb control, BAR0 + 0x0080 */
-struct net2280_usb_regs {
-	// offset 0x0080
-	u32		stdrsp;
-#define     STALL_UNSUPPORTED_REQUESTS                          31
-#define     SET_TEST_MODE                                       16
-#define     GET_OTHER_SPEED_CONFIGURATION                       15
-#define     GET_DEVICE_QUALIFIER                                14
-#define     SET_ADDRESS                                         13
-#define     ENDPOINT_SET_CLEAR_HALT                             12
-#define     DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP               11
-#define     GET_STRING_DESCRIPTOR_2                             10
-#define     GET_STRING_DESCRIPTOR_1                             9
-#define     GET_STRING_DESCRIPTOR_0                             8
-#define     GET_SET_INTERFACE                                   6
-#define     GET_SET_CONFIGURATION                               5
-#define     GET_CONFIGURATION_DESCRIPTOR                        4
-#define     GET_DEVICE_DESCRIPTOR                               3
-#define     GET_ENDPOINT_STATUS                                 2
-#define     GET_INTERFACE_STATUS                                1
-#define     GET_DEVICE_STATUS                                   0
-	u32		prodvendid;
-#define     PRODUCT_ID                                          16
-#define     VENDOR_ID                                           0
-	u32		relnum;
-	u32		usbctl;
-#define     SERIAL_NUMBER_INDEX                                 16
-#define     PRODUCT_ID_STRING_ENABLE                            13
-#define     VENDOR_ID_STRING_ENABLE                             12
-#define     USB_ROOT_PORT_WAKEUP_ENABLE                         11
-#define     VBUS_PIN                                            10
-#define     TIMED_DISCONNECT                                    9
-#define     SUSPEND_IMMEDIATELY                                 7
-#define     SELF_POWERED_USB_DEVICE                             6
-#define     REMOTE_WAKEUP_SUPPORT                               5
-#define     PME_POLARITY                                        4
-#define     USB_DETECT_ENABLE                                   3
-#define     PME_WAKEUP_ENABLE                                   2
-#define     DEVICE_REMOTE_WAKEUP_ENABLE                         1
-#define     SELF_POWERED_STATUS                                 0
-	// offset 0x0090
-	u32		usbstat;
-#define     HIGH_SPEED                                          7
-#define     FULL_SPEED                                          6
-#define     GENERATE_RESUME                                     5
-#define     GENERATE_DEVICE_REMOTE_WAKEUP                       4
-	u32		xcvrdiag;
-#define     FORCE_HIGH_SPEED_MODE                               31
-#define     FORCE_FULL_SPEED_MODE                               30
-#define     USB_TEST_MODE                                       24
-#define     LINE_STATE                                          16
-#define     TRANSCEIVER_OPERATION_MODE                          2
-#define     TRANSCEIVER_SELECT                                  1
-#define     TERMINATION_SELECT                                  0
-	u32		setup0123;
-	u32		setup4567;
-	// offset 0x0090
-	u32		_unused0;
-	u32		ouraddr;
-#define     FORCE_IMMEDIATE                                     7
-#define     OUR_USB_ADDRESS                                     0
-	u32		ourconfig;
-} __attribute__ ((packed));
-
-/* pci control, BAR0 + 0x0100 */
-struct net2280_pci_regs {
-	// offset 0x0100
-	u32		 pcimstctl;
-#define     PCI_ARBITER_PARK_SELECT                             13
-#define     PCI_MULTI LEVEL_ARBITER                             12
-#define     PCI_RETRY_ABORT_ENABLE                              11
-#define     DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE              10
-#define     DMA_READ_MULTIPLE_ENABLE                            9
-#define     DMA_READ_LINE_ENABLE                                8
-#define     PCI_MASTER_COMMAND_SELECT                           6
-#define         MEM_READ_OR_WRITE                                   0
-#define         IO_READ_OR_WRITE                                    1
-#define         CFG_READ_OR_WRITE                                   2
-#define     PCI_MASTER_START                                    5
-#define     PCI_MASTER_READ_WRITE                               4
-#define         PCI_MASTER_WRITE                                    0
-#define         PCI_MASTER_READ                                     1
-#define     PCI_MASTER_BYTE_WRITE_ENABLES                       0
-	u32		 pcimstaddr;
-	u32		 pcimstdata;
-	u32		 pcimststat;
-#define     PCI_ARBITER_CLEAR                                   2
-#define     PCI_EXTERNAL_ARBITER                                1
-#define     PCI_HOST_MODE                                       0
-} __attribute__ ((packed));
-
-/* dma control, BAR0 + 0x0180 ... array of four structs like this,
- * for channels 0..3.  see also struct net2280_dma:  descriptor
- * that can be loaded into some of these registers.
- */
-struct net2280_dma_regs {	/* [11.7] */
-	// offset 0x0180, 0x01a0, 0x01c0, 0x01e0, 
-	u32		dmactl;
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE            25
-#define     DMA_CLEAR_COUNT_ENABLE                              21
-#define     DESCRIPTOR_POLLING_RATE                             19
-#define         POLL_CONTINUOUS                                     0
-#define         POLL_1_USEC                                         1
-#define         POLL_100_USEC                                       2
-#define         POLL_1_MSEC                                         3
-#define     DMA_VALID_BIT_POLLING_ENABLE                        18
-#define     DMA_VALID_BIT_ENABLE                                17
-#define     DMA_SCATTER_GATHER_ENABLE                           16
-#define     DMA_OUT_AUTO_START_ENABLE                           4
-#define     DMA_PREEMPT_ENABLE                                  3
-#define     DMA_FIFO_VALIDATE                                   2
-#define     DMA_ENABLE                                          1
-#define     DMA_ADDRESS_HOLD                                    0
-	u32		dmastat;
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
-#define     DMA_TRANSACTION_DONE_INTERRUPT                      24
-#define     DMA_ABORT                                           1
-#define     DMA_START                                           0
-	u32		_unused0 [2];
-	// offset 0x0190, 0x01b0, 0x01d0, 0x01f0, 
-	u32		dmacount;
-#define     VALID_BIT                                           31
-#define     DMA_DIRECTION                                       30
-#define     DMA_DONE_INTERRUPT_ENABLE                           29
-#define     END_OF_CHAIN                                        28
-#define         DMA_BYTE_COUNT_MASK                                 ((1<<24)-1)
-#define     DMA_BYTE_COUNT                                      0
-	u32		dmaaddr;
-	u32		dmadesc;
-	u32		_unused1;
-} __attribute__ ((packed));
-
-/* dedicated endpoint registers, BAR0 + 0x0200 */
-
-struct net2280_dep_regs {	/* [11.8] */
-	// offset 0x0200, 0x0210, 0x220, 0x230, 0x240
-	u32		dep_cfg;
-	// offset 0x0204, 0x0214, 0x224, 0x234, 0x244
-	u32		dep_rsp;
-	u32		_unused [2];
-} __attribute__ ((packed));
-
-/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
- * like this, for ep0 then the configurable endpoints A..F
- * ep0 reserved for control; E and F have only 64 bytes of fifo
- */
-struct net2280_ep_regs {	/* [11.9] */
-	// offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
-	u32		ep_cfg;
-#define     ENDPOINT_BYTE_COUNT                                 16
-#define     ENDPOINT_ENABLE                                     10
-#define     ENDPOINT_TYPE                                       8
-#define     ENDPOINT_DIRECTION                                  7
-#define     ENDPOINT_NUMBER                                     0
-	u32		ep_rsp;
-#define     SET_NAK_OUT_PACKETS                                 15
-#define     SET_EP_HIDE_STATUS_PHASE                            14
-#define     SET_EP_FORCE_CRC_ERROR                              13
-#define     SET_INTERRUPT_MODE                                  12
-#define     SET_CONTROL_STATUS_PHASE_HANDSHAKE                  11
-#define     SET_NAK_OUT_PACKETS_MODE                            10
-#define     SET_ENDPOINT_TOGGLE                                 9
-#define     SET_ENDPOINT_HALT                                   8
-#define     CLEAR_NAK_OUT_PACKETS                               7
-#define     CLEAR_EP_HIDE_STATUS_PHASE                          6
-#define     CLEAR_EP_FORCE_CRC_ERROR                            5
-#define     CLEAR_INTERRUPT_MODE                                4
-#define     CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE                3
-#define     CLEAR_NAK_OUT_PACKETS_MODE                          2
-#define     CLEAR_ENDPOINT_TOGGLE                               1
-#define     CLEAR_ENDPOINT_HALT                                 0
-	u32		ep_irqenb;
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE              6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE           5
-#define     DATA_PACKET_RECEIVED_INTERRUPT_ENABLE               3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE            2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE                1
-#define     DATA_IN_TOKEN_INTERRUPT_ENABLE                      0
-	u32		ep_stat;
-#define     FIFO_VALID_COUNT                                    24
-#define     HIGH_BANDWIDTH_OUT_TRANSACTION_PID                  22
-#define     TIMEOUT                                             21
-#define     USB_STALL_SENT                                      20
-#define     USB_IN_NAK_SENT                                     19
-#define     USB_IN_ACK_RCVD                                     18
-#define     USB_OUT_PING_NAK_SENT                               17
-#define     USB_OUT_ACK_SENT                                    16
-#define     FIFO_OVERFLOW                                       13
-#define     FIFO_UNDERFLOW                                      12
-#define     FIFO_FULL                                           11
-#define     FIFO_EMPTY                                          10
-#define     FIFO_FLUSH                                          9
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT                     6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT                  5
-#define     NAK_OUT_PACKETS                                     4
-#define     DATA_PACKET_RECEIVED_INTERRUPT                      3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT                   2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT                       1
-#define     DATA_IN_TOKEN_INTERRUPT                             0
-	// offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
-	u32		ep_avail;
-	u32		ep_data;
-	u32		_unused0 [2];
-} __attribute__ ((packed));
+#include <linux/usb/net2280.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 51424f66a76..68e3d8f5da8 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -572,9 +572,10 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
 	switch (status) {
 
 	case 0: 			/* normal completion? */
-		if (ep == dev->out_ep)
+		if (ep == dev->out_ep) {
 			check_read_data (dev, ep, req);
-		else
+			memset (req->buf, 0x55, req->length);
+		} else
 			reinit_write_data (dev, ep, req);
 		break;
 
@@ -626,6 +627,8 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
 
 	if (strcmp (ep->name, EP_IN_NAME) == 0)
 		reinit_write_data (ep->driver_data, ep, req);
+	else
+		memset (req->buf, 0x55, req->length);
 
 	status = usb_ep_queue (ep, req, gfp_flags);
 	if (status) {
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 1e03f1a5a5f..a1bd2bea6de 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -350,7 +350,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
 /* PCI driver selection metadata; PCI hotplugging uses this */
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB 2.0 EHCI controller */
-	PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 980030d684d..6b7350b5241 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -20,7 +20,7 @@
 #include <asm/arch/board.h>
 
 #ifndef CONFIG_ARCH_AT91RM9200
-#error "This file is AT91RM9200 bus glue.  CONFIG_ARCH_AT91RM9200 must be defined."
+#error "CONFIG_ARCH_AT91RM9200 must be defined."
 #endif
 
 /* interface and function clocks */
@@ -84,8 +84,6 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
  * Allocates basic resources for this USB host controller, and
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
  */
 int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
 {
@@ -148,7 +146,6 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *
 }
 
 
-/* may be called without controller electrically present */
 /* may be called with controller, bus, and devices active */
 
 /**
@@ -166,11 +163,11 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde
 	usb_remove_hcd(hcd);
 	at91_stop_hc(pdev);
 	iounmap(hcd->regs);
- 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
- 	clk_put(fclk);
- 	clk_put(iclk);
- 	fclk = iclk = NULL;
+	clk_put(fclk);
+	clk_put(iclk);
+	fclk = iclk = NULL;
 
 	dev_set_drvdata(&pdev->dev, NULL);
 	return 0;
@@ -235,8 +232,8 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	.hub_control =		ohci_hub_control,
 
 #ifdef CONFIG_PM
-	.hub_suspend =		ohci_hub_suspend,
-	.hub_resume =		ohci_hub_resume,
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
 #endif
 	.start_port_reset =	ohci_start_port_reset,
 };
@@ -254,21 +251,21 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
-static int ohci_hcd_at91_drv_suspend(struct platform_device *dev, u32 state, u32 level)
-{
-	printk("%s(%s:%d): not implemented yet\n",
-		__func__, __FILE__, __LINE__);
 
+/* REVISIT suspend/resume look "too" simple here */
+
+static int
+ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
+{
 	clk_disable(fclk);
+	clk_disable(iclk);
 
 	return 0;
 }
 
-static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
+static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
 {
-	printk("%s(%s:%d): not implemented yet\n",
-		__func__, __FILE__, __LINE__);
-
+	clk_enable(iclk);
 	clk_enable(fclk);
 
 	return 0;
@@ -278,6 +275,8 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
 #define ohci_hcd_at91_drv_resume  NULL
 #endif
 
+MODULE_ALIAS("at91rm9200-ohci");
+
 static struct platform_driver ohci_hcd_at91_driver = {
 	.probe		= ohci_hcd_at91_drv_probe,
 	.remove		= ohci_hcd_at91_drv_remove,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 544f7589912..73f5a379d9b 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
 		i = ohci->num_ports;
 		while (i--)
 			ohci_writel (ohci, RH_PS_PSS,
-				&ohci->regs->roothub.portstatus [temp]);
+				&ohci->regs->roothub.portstatus [i]);
 		ohci_dbg (ohci, "restart complete\n");
 	}
 	return 0;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 1bfe96f4d04..b268537e389 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -206,7 +206,7 @@ static const struct hc_driver ohci_pci_hc_driver = {
 
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB OHCI controller */
-	PCI_DEVICE_CLASS((PCI_CLASS_SERIAL_USB << 8) | 0x10, ~0),
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
 	}, { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 682bf221566..1da5de573a6 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -30,6 +30,7 @@
 /* clock device associated with the hcd */
 
 static struct clk *clk;
+static struct clk *usb_clk;
 
 /* forward definitions */
 
@@ -37,7 +38,7 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
 
 /* conversion functions */
 
-struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
 {
 	return hcd->self.controller->platform_data;
 }
@@ -47,6 +48,10 @@ static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
 	struct s3c2410_hcd_info *info = dev->dev.platform_data;
 
 	dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+
+	clk_enable(usb_clk);
+	mdelay(2);			/* let the bus clock stabilise */
+
 	clk_enable(clk);
 
 	if (info != NULL) {
@@ -75,6 +80,7 @@ static void s3c2410_stop_hc(struct platform_device *dev)
 	}
 
 	clk_disable(clk);
+	clk_disable(usb_clk);
 }
 
 /* ohci_s3c2410_hub_status_data
@@ -316,7 +322,8 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
  *
 */
 
-void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+static void
+usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
 {
 	usb_remove_hcd(hcd);
 	s3c2410_stop_hc(dev);
@@ -334,8 +341,8 @@ void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
  * through the hotplug entry's driver_data.
  *
  */
-int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
-			   struct platform_device *dev)
+static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+				  struct platform_device *dev)
 {
 	struct usb_hcd *hcd = NULL;
 	int retval;
@@ -353,14 +360,21 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dev_err(&dev->dev, "request_mem_region failed");
 		retval = -EBUSY;
-		goto err0;
+		goto err_put;
 	}
 
-	clk = clk_get(NULL, "usb-host");
+	clk = clk_get(&dev->dev, "usb-host");
 	if (IS_ERR(clk)) {
 		dev_err(&dev->dev, "cannot get usb-host clock\n");
 		retval = -ENOENT;
-		goto err1;
+		goto err_mem;
+	}
+
+	usb_clk = clk_get(&dev->dev, "upll");
+	if (IS_ERR(usb_clk)) {
+		dev_err(&dev->dev, "cannot get usb-host clock\n");
+		retval = -ENOENT;
+		goto err_clk;
 	}
 
 	s3c2410_start_hc(dev, hcd);
@@ -369,26 +383,29 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 	if (!hcd->regs) {
 		dev_err(&dev->dev, "ioremap failed\n");
 		retval = -ENOMEM;
-		goto err2;
+		goto err_ioremap;
 	}
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
 	if (retval != 0)
-		goto err2;
+		goto err_ioremap;
 
 	return 0;
 
- err2:
+ err_ioremap:
 	s3c2410_stop_hc(dev);
 	iounmap(hcd->regs);
+	clk_put(usb_clk);
+
+ err_clk:
 	clk_put(clk);
 
- err1:
+ err_mem:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
- err0:
+ err_put:
 	usb_put_hcd(hcd);
 	return retval;
 }
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 9e81c26313f..1045f846fbe 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/acpi.h>
+#include "pci-quirks.h"
 
 
 #define UHCI_USBLEGSUP		0xc0		/* legacy support */
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
new file mode 100644
index 00000000000..1564edfff6f
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.h
@@ -0,0 +1,7 @@
+#ifndef __LINUX_USB_PCI_QUIRKS_H
+#define __LINUX_USB_PCI_QUIRKS_H
+
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
+#endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4edb8330c44..d225e11f405 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -50,6 +50,7 @@
 
 #include "../core/hcd.h"
 #include "uhci-hcd.h"
+#include "pci-quirks.h"
 
 /*
  * Version Information
@@ -100,9 +101,6 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
 #include "uhci-q.c"
 #include "uhci-hub.c"
 
-extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-
 /*
  * Finish up a host controller reset and update the recorded state.
  */
@@ -117,8 +115,7 @@ static void finish_reset(struct uhci_hcd *uhci)
 	for (port = 0; port < uhci->rh_numports; ++port)
 		outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
 
-	uhci->port_c_suspend = uhci->suspended_ports =
-			uhci->resuming_ports = 0;
+	uhci->port_c_suspend = uhci->resuming_ports = 0;
 	uhci->rh_state = UHCI_RH_RESET;
 	uhci->is_stopped = UHCI_IS_STOPPED;
 	uhci_to_hcd(uhci)->state = HC_STATE_HALT;
@@ -861,7 +858,7 @@ static const struct hc_driver uhci_driver = {
 
 static const struct pci_device_id uhci_pci_ids[] = { {
 	/* handle any USB UHCI controller */
-	PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
 	.driver_data =	(unsigned long) &uhci_driver,
 	}, { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 4a69c7eb09b..d5c8f4d9282 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -415,7 +415,6 @@ struct uhci_hcd {
 
 	/* Support for port suspend/resume/reset */
 	unsigned long port_c_suspend;		/* Bit-arrays of ports */
-	unsigned long suspended_ports;
 	unsigned long resuming_ports;
 	unsigned long ports_timeout;		/* Time to stop signalling */
 
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 152971d1676..c8451d9578f 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -85,11 +85,10 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
 {
 	int status;
 
-	if (test_bit(port, &uhci->suspended_ports)) {
+	if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
 		CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
-		clear_bit(port, &uhci->suspended_ports);
-		clear_bit(port, &uhci->resuming_ports);
-		set_bit(port, &uhci->port_c_suspend);
+		if (test_bit(port, &uhci->resuming_ports))
+			set_bit(port, &uhci->port_c_suspend);
 
 		/* The controller won't actually turn off the RD bit until
 		 * it has had a chance to send a low-speed EOP sequence,
@@ -97,6 +96,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
 		 * slightly longer for good luck. */
 		udelay(4);
 	}
+	clear_bit(port, &uhci->resuming_ports);
 }
 
 /* Wait for the UHCI controller in HP's iLO2 server management chip.
@@ -265,8 +265,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			wPortChange |= USB_PORT_STAT_C_SUSPEND;
 			lstatus |= 1;
 		}
-		if (test_bit(port, &uhci->suspended_ports))
-			lstatus |= 2;
 		if (test_bit(port, &uhci->resuming_ports))
 			lstatus |= 4;
 
@@ -309,7 +307,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			set_bit(port, &uhci->suspended_ports);
 			SET_RH_PORTSTAT(USBPORTSC_SUSP);
 			OK(0);
 		case USB_PORT_FEAT_RESET:
@@ -343,8 +340,11 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			CLR_RH_PORTSTAT(USBPORTSC_PEC);
 			OK(0);
 		case USB_PORT_FEAT_SUSPEND:
-			if (test_bit(port, &uhci->suspended_ports) &&
-					!test_and_set_bit(port,
+			if (!(inw(port_addr) & USBPORTSC_SUSP)) {
+
+				/* Make certain the port isn't suspended */
+				uhci_finish_suspend(uhci, port, port_addr);
+			} else if (!test_and_set_bit(port,
 						&uhci->resuming_ports)) {
 				SET_RH_PORTSTAT(USBPORTSC_RD);
 
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 5246b35301d..650103bc961 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -200,45 +200,41 @@ config USB_POWERMATE
 	  To compile this driver as a module, choose M here: the
 	  module will be called powermate.
 
-config USB_MTOUCH
-	tristate "MicroTouch USB Touchscreen Driver"
+config USB_TOUCHSCREEN
+	tristate "USB Touchscreen Driver"
 	depends on USB && INPUT
 	---help---
-	  Say Y here if you want to use a MicroTouch (Now 3M) USB 
-	  Touchscreen controller.
+	  USB Touchscreen driver for:
+	  - eGalax Touchkit USB
+	  - PanJit TouchSet USB
+	  - 3M MicroTouch USB
+	  - ITM
 
-	  See <file:Documentation/usb/mtouch.txt> for additional information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mtouchusb.
-
-config USB_ITMTOUCH
-	tristate "ITM Touch USB Touchscreen Driver"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use a ITM Touch USB
-	  Touchscreen controller.
-
-	  This touchscreen is used in LG 1510SF monitors.
+	  Have a look at <http://linux.chapter7.ch/touchkit/> for
+	  a usage description and the required user-space stuff.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called itmtouch.
+	  module will be called usbtouchscreen.
 
-config USB_EGALAX
-	tristate "eGalax TouchKit USB Touchscreen Driver"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use a eGalax TouchKit USB
-	  Touchscreen controller.
+config USB_TOUCHSCREEN_EGALAX
+	default y
+	bool "eGalax device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
-	  The driver has been tested on a Xenarc 700TSV monitor
-	  with eGalax touchscreen.
+config USB_TOUCHSCREEN_PANJIT
+	default y
+	bool "PanJit device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
-	  Have a look at <http://linux.chapter7.ch/touchkit/> for
-	  a usage description and the required user-space stuff.
+config USB_TOUCHSCREEN_3M
+	default y
+	bool "3M/Microtouch device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called touchkitusb.
+config USB_TOUCHSCREEN_ITM
+	default y
+	bool "ITM device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
 config USB_YEALINK
 	tristate "Yealink usb-p1k voip phone"
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index d512d9f488f..764114529c5 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
 obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o
 obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o
 obj-$(CONFIG_USB_EGALAX)	+= touchkitusb.o
+obj-$(CONFIG_USB_TOUCHSCREEN)	+= usbtouchscreen.o
 obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
 obj-$(CONFIG_USB_WACOM)		+= wacom.o
 obj-$(CONFIG_USB_ACECAD)	+= acecad.o
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index d4bf1701046..435273e7c85 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1372,6 +1372,11 @@ void hid_close(struct hid_device *hid)
 		usb_kill_urb(hid->urbin);
 }
 
+#define USB_VENDOR_ID_PANJIT		0x134c
+
+#define USB_VENDOR_ID_SILVERCREST	0x062a
+#define USB_DEVICE_ID_SILVERCREST_KB	0x0201
+
 /*
  * Initialize all reports
  */
@@ -1552,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_HP		0x03f0
 #define USB_DEVICE_ID_HP_USBHUB_KB	0x020c
 
+#define USB_VENDOR_ID_IBM		0x04b3
+#define USB_DEVICE_ID_IBM_USBHUB_KB	0x3005
+
 #define USB_VENDOR_ID_CREATIVELABS	0x062a
 #define USB_DEVICE_ID_CREATIVELABS_SILVERCREST	0x0201
 
@@ -1655,9 +1663,12 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 3, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 4, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF + 3, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 
@@ -1673,8 +1684,10 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
 	{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
@@ -1701,6 +1714,11 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
 
+	{ USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
+
 	{ 0, 0 }
 };
 
diff --git a/drivers/usb/input/hid-ff.c b/drivers/usb/input/hid-ff.c
index 72e698658b5..d5c91ee6799 100644
--- a/drivers/usb/input/hid-ff.c
+++ b/drivers/usb/input/hid-ff.c
@@ -34,12 +34,6 @@
 
 #include "hid.h"
 
-/* Drivers' initializing functions */
-extern int hid_lgff_init(struct hid_device* hid);
-extern int hid_lg3d_init(struct hid_device* hid);
-extern int hid_pid_init(struct hid_device* hid);
-extern int hid_tmff_init(struct hid_device* hid);
-
 /*
  * This table contains pointers to initializers. To add support for new
  * devices, you need to add the USB vendor and product ids here.
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index 4e1b784fe52..9c62837b5b8 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -533,3 +533,8 @@ static inline int hid_ff_event(struct hid_device *hid, struct input_dev *input,
 		return hid->ff_event(hid, input, type, code, value);
 	return -ENOSYS;
 }
+
+int hid_lgff_init(struct hid_device* hid);
+int hid_tmff_init(struct hid_device* hid);
+int hid_pid_init(struct hid_device* hid);
+
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 6dd66669617..c4670e1d465 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -317,6 +317,7 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
 				}
 
 				schedule();
+				set_current_state(TASK_INTERRUPTIBLE);
 			}
 
 			set_current_state(TASK_RUNNING);
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index b4a051b549d..3d911976f37 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -297,6 +297,8 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs)
 			remote->data.bits_left -= 6;
 		} else {
 			err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
+			remote->stage = 0;
+			return;
 		}
 
 		keyspan_load_tester(remote, 5);
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
new file mode 100644
index 00000000000..e9a07c1e905
--- /dev/null
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -0,0 +1,605 @@
+/******************************************************************************
+ * usbtouchscreen.c
+ * Driver for USB Touchscreens, supporting those devices:
+ *  - eGalax Touchkit
+ *  - 3M/Microtouch
+ *  - ITM
+ *  - PanJit TouchSet
+ *
+ * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
+ * Copyright (C) by Todd E. Johnson (mtouchusb.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Driver is based on touchkitusb.c
+ * - ITM parts are from itmtouch.c
+ * - 3M parts are from mtouchusb.c
+ * - PanJit parts are from an unmerged driver by Lanslott Gish
+ *
+ *****************************************************************************/
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb_input.h>
+
+
+#define DRIVER_VERSION		"v0.3"
+#define DRIVER_AUTHOR		"Daniel Ritz <daniel.ritz@gmx.ch>"
+#define DRIVER_DESC		"USB Touchscreen Driver"
+
+static int swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
+/* device specifc data/functions */
+struct usbtouch_usb;
+struct usbtouch_device_info {
+	int min_xc, max_xc;
+	int min_yc, max_yc;
+	int min_press, max_press;
+	int rept_size;
+	int flags;
+
+	void (*process_pkt) (struct usbtouch_usb *usbtouch, struct pt_regs *regs, unsigned char *pkt, int len);
+	int  (*read_data)   (unsigned char *pkt, int *x, int *y, int *touch, int *press);
+	int  (*init)        (struct usbtouch_usb *usbtouch);
+};
+
+#define USBTOUCH_FLG_BUFFER	0x01
+
+
+/* a usbtouch device */
+struct usbtouch_usb {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	unsigned char *buffer;
+	int buf_len;
+	struct urb *irq;
+	struct usb_device *udev;
+	struct input_dev *input;
+	struct usbtouch_device_info *type;
+	char name[128];
+	char phys[64];
+};
+
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+                                 struct pt_regs *regs, unsigned char *pkt, int len);
+
+/* device types */
+enum {
+	DEVTPYE_DUMMY = -1,
+	DEVTYPE_EGALAX,
+	DEVTYPE_PANJIT,
+	DEVTYPE_3M,
+	DEVTYPE_ITM,
+};
+
+static struct usb_device_id usbtouch_devices[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+	{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+	{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+	{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+#endif
+
+	{}
+};
+
+
+/*****************************************************************************
+ * eGalax part
+ */
+
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+
+#define EGALAX_PKT_TYPE_MASK		0xFE
+#define EGALAX_PKT_TYPE_REPT		0x80
+#define EGALAX_PKT_TYPE_DIAG		0x0A
+
+static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
+		return 0;
+
+	*x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+	*y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+	*touch = pkt[0] & 0x01;
+
+	return 1;
+
+}
+
+static int egalax_get_pkt_len(unsigned char *buf)
+{
+	switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+	case EGALAX_PKT_TYPE_REPT:
+		return 5;
+
+	case EGALAX_PKT_TYPE_DIAG:
+		return buf[1] + 2;
+	}
+
+	return 0;
+}
+
+static void egalax_process(struct usbtouch_usb *usbtouch, struct pt_regs *regs,
+                           unsigned char *pkt, int len)
+{
+	unsigned char *buffer;
+	int pkt_len, buf_len, pos;
+
+	/* if the buffer contains data, append */
+	if (unlikely(usbtouch->buf_len)) {
+		int tmp;
+
+		/* if only 1 byte in buffer, add another one to get length */
+		if (usbtouch->buf_len == 1)
+			usbtouch->buffer[1] = pkt[0];
+
+		pkt_len = egalax_get_pkt_len(usbtouch->buffer);
+
+		/* unknown packet: drop everything */
+		if (!pkt_len)
+			return;
+
+		/* append, process */
+		tmp = pkt_len - usbtouch->buf_len;
+		memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+		usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len);
+
+		buffer = pkt + tmp;
+		buf_len = len - tmp;
+	} else {
+		buffer = pkt;
+		buf_len = len;
+	}
+
+	/* only one byte left in buffer */
+	if (unlikely(buf_len == 1)) {
+		usbtouch->buffer[0] = buffer[0];
+		usbtouch->buf_len = 1;
+		return;
+	}
+
+	/* loop over the buffer */
+	pos = 0;
+	while (pos < buf_len) {
+		/* get packet len */
+		pkt_len = egalax_get_pkt_len(buffer + pos);
+
+		/* unknown packet: drop everything */
+		if (unlikely(!pkt_len))
+			return;
+
+		/* full packet: process */
+		if (likely(pkt_len <= buf_len)) {
+			usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len);
+		} else {
+			/* incomplete packet: save in buffer */
+			memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+			usbtouch->buf_len = buf_len - pos;
+		}
+		pos += pkt_len;
+	}
+}
+#endif
+
+
+/*****************************************************************************
+ * PanJit Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	*x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	*y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	*touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * 3M/Microtouch Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+
+#define MTOUCHUSB_ASYNC_REPORT          1
+#define MTOUCHUSB_RESET                 7
+#define MTOUCHUSB_REQ_CTRLLR_ID         10
+
+static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	*x = (pkt[8] << 8) | pkt[7];
+	*y = (pkt[10] << 8) | pkt[9];
+	*touch = (pkt[2] & 0x40) ? 1 : 0;
+
+	return 1;
+}
+
+static int mtouch_init(struct usbtouch_usb *usbtouch)
+{
+	int ret;
+
+	ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+	                      MTOUCHUSB_RESET,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
+	    __FUNCTION__, ret);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+	                      MTOUCHUSB_ASYNC_REPORT,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
+	    __FUNCTION__, ret);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ITM Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	*x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	*press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
+	*touch = ~pkt[7] & 0x20;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * the different device descriptors
+ */
+static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+	[DEVTYPE_EGALAX] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 16,
+		.flags		= USBTOUCH_FLG_BUFFER,
+		.process_pkt	= egalax_process,
+		.read_data	= egalax_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+	[DEVTYPE_PANJIT] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 8,
+		.read_data	= panjit_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+	[DEVTYPE_3M] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x4000,
+		.min_yc		= 0x0,
+		.max_yc		= 0x4000,
+		.rept_size	= 11,
+		.read_data	= mtouch_read_data,
+		.init		= mtouch_init,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+	[DEVTYPE_ITM] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.max_press	= 0xff,
+		.rept_size	= 8,
+		.read_data	= itm_read_data,
+	},
+#endif
+};
+
+
+/*****************************************************************************
+ * Generic Part
+ */
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+                                 struct pt_regs *regs, unsigned char *pkt, int len)
+{
+	int x, y, touch, press;
+	struct usbtouch_device_info *type = usbtouch->type;
+
+	if (!type->read_data(pkt, &x, &y, &touch, &press))
+			return;
+
+	input_regs(usbtouch->input, regs);
+	input_report_key(usbtouch->input, BTN_TOUCH, touch);
+
+	if (swap_xy) {
+		input_report_abs(usbtouch->input, ABS_X, y);
+		input_report_abs(usbtouch->input, ABS_Y, x);
+	} else {
+		input_report_abs(usbtouch->input, ABS_X, x);
+		input_report_abs(usbtouch->input, ABS_Y, y);
+	}
+	if (type->max_press)
+		input_report_abs(usbtouch->input, ABS_PRESSURE, press);
+	input_sync(usbtouch->input);
+}
+
+
+static void usbtouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+	struct usbtouch_usb *usbtouch = urb->context;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ETIMEDOUT:
+		/* this urb is timing out */
+		dbg("%s - urb timed out - was the device unplugged?",
+		    __FUNCTION__);
+		return;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	usbtouch->type->process_pkt(usbtouch, regs, usbtouch->data, urb->actual_length);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err("%s - usb_submit_urb failed with result: %d",
+		    __FUNCTION__, retval);
+}
+
+static int usbtouch_open(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input->private;
+
+	usbtouch->irq->dev = usbtouch->udev;
+
+	if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usbtouch_close(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input->private;
+
+	usb_kill_urb(usbtouch->irq);
+}
+
+
+static void usbtouch_free_buffers(struct usb_device *udev,
+				  struct usbtouch_usb *usbtouch)
+{
+	if (usbtouch->data)
+		usb_buffer_free(udev, usbtouch->type->rept_size,
+		                usbtouch->data, usbtouch->data_dma);
+	kfree(usbtouch->buffer);
+}
+
+
+static int usbtouch_probe(struct usb_interface *intf,
+			  const struct usb_device_id *id)
+{
+	struct usbtouch_usb *usbtouch;
+	struct input_dev *input_dev;
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usbtouch_device_info *type;
+	int err;
+
+	interface = intf->cur_altsetting;
+	endpoint = &interface->endpoint[0].desc;
+
+	usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!usbtouch || !input_dev)
+		goto out_free;
+
+	type = &usbtouch_dev_info[id->driver_info];
+	usbtouch->type = type;
+	if (!type->process_pkt)
+		type->process_pkt = usbtouch_process_pkt;
+
+	usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
+	                                  SLAB_KERNEL, &usbtouch->data_dma);
+	if (!usbtouch->data)
+		goto out_free;
+
+	if (type->flags & USBTOUCH_FLG_BUFFER) {
+		usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
+		if (!usbtouch->buffer)
+			goto out_free_buffers;
+	}
+
+	usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!usbtouch->irq) {
+		dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__);
+		goto out_free_buffers;
+	}
+
+	usbtouch->udev = udev;
+	usbtouch->input = input_dev;
+
+	if (udev->manufacturer)
+		strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
+		strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
+	}
+
+	if (!strlen(usbtouch->name))
+		snprintf(usbtouch->name, sizeof(usbtouch->name),
+			"USB Touchscreen %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
+	strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
+
+	input_dev->name = usbtouch->name;
+	input_dev->phys = usbtouch->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->cdev.dev = &intf->dev;
+	input_dev->private = usbtouch;
+	input_dev->open = usbtouch_open;
+	input_dev->close = usbtouch_close;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
+	if (type->max_press)
+		input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
+		                     type->max_press, 0, 0);
+
+	usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
+			 usb_rcvintpipe(usbtouch->udev, 0x81),
+			 usbtouch->data, type->rept_size,
+			 usbtouch_irq, usbtouch, endpoint->bInterval);
+
+	usbtouch->irq->transfer_dma = usbtouch->data_dma;
+	usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* device specific init */
+	if (type->init) {
+		err = type->init(usbtouch);
+		if (err) {
+			dbg("%s - type->init() failed, err: %d", __FUNCTION__, err);
+			goto out_free_buffers;
+		}
+	}
+
+	err = input_register_device(usbtouch->input);
+	if (err) {
+		dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err);
+		goto out_free_buffers;
+	}
+
+	usb_set_intfdata(intf, usbtouch);
+
+	return 0;
+
+out_free_buffers:
+	usbtouch_free_buffers(udev, usbtouch);
+out_free:
+	input_free_device(input_dev);
+	kfree(usbtouch);
+	return -ENOMEM;
+}
+
+static void usbtouch_disconnect(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+	dbg("%s - called", __FUNCTION__);
+
+	if (!usbtouch)
+		return;
+
+	dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__);
+	usb_set_intfdata(intf, NULL);
+	usb_kill_urb(usbtouch->irq);
+	input_unregister_device(usbtouch->input);
+	usb_free_urb(usbtouch->irq);
+	usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
+	kfree(usbtouch);
+}
+
+MODULE_DEVICE_TABLE(usb, usbtouch_devices);
+
+static struct usb_driver usbtouch_driver = {
+	.name		= "usbtouchscreen",
+	.probe		= usbtouch_probe,
+	.disconnect	= usbtouch_disconnect,
+	.id_table	= usbtouch_devices,
+};
+
+static int __init usbtouch_init(void)
+{
+	return usb_register(&usbtouch_driver);
+}
+
+static void __exit usbtouch_cleanup(void)
+{
+	usb_deregister(&usbtouch_driver);
+}
+
+module_init(usbtouch_init);
+module_exit(usbtouch_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("touchkitusb");
+MODULE_ALIAS("itmtouch");
+MODULE_ALIAS("mtouchusb");
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index d3e15df9e81..cf84c6096f2 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -9,7 +9,7 @@
  *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
  *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
  *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2005 Ping Cheng		<pingc@wacom.com>
+ *  Copyright (c) 2002-2006 Ping Cheng		<pingc@wacom.com>
  *
  *  ChangeLog:
  *      v0.1 (vp)  - Initial release
@@ -56,6 +56,8 @@
  *		   - Merged wacom_intuos3_irq into wacom_intuos_irq
  *	v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
  *		   - Report Device IDs
+ *	v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
+ *		   - Minor data report fix
  */
 
 /*
@@ -78,7 +80,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.44"
+#define DRIVER_VERSION "v1.45"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -99,6 +101,8 @@ enum {
 	PL,
 	INTUOS,
 	INTUOS3,
+	INTUOS312,
+	INTUOS319,
 	CINTIQ,
 	MAX_TYPE
 };
@@ -127,7 +131,19 @@ struct wacom {
 	char phys[32];
 };
 
+#define USB_REQ_GET_REPORT	0x01
 #define USB_REQ_SET_REPORT	0x09
+
+static int usb_get_report(struct usb_interface *intf, unsigned char type,
+				unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(interface_to_usbdev(intf),
+		usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+		USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+		buf, size, 100);
+}
+
 static int usb_set_report(struct usb_interface *intf, unsigned char type,
 				unsigned char id, void *buf, int size)
 {
@@ -206,7 +222,8 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
 			wacom->tool[1] = BTN_TOOL_PEN;
 			id = STYLUS_DEVICE_ID;
 		}
-		input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */
+		input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
+		input_report_abs(dev, ABS_MISC, id); /* report tool id */
 		input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
 		input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
 		input_report_abs(dev, ABS_PRESSURE, pressure);
@@ -239,7 +256,7 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
 	struct wacom *wacom = urb->context;
 	unsigned char *data = wacom->data;
 	struct input_dev *dev = wacom->dev;
-	int retval;
+	int retval, id;
 
 	switch (urb->status) {
 	case 0:
@@ -263,12 +280,15 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
 
 	input_regs(dev, regs);
 	if (data[1] & 0x04) {
-		input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0);
+		input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
 		input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
+		id = ERASER_DEVICE_ID;
 	} else {
-		input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0);
+		input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
 		input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+		id = STYLUS_DEVICE_ID;
 	}
+	input_report_abs(dev, ABS_MISC, id); /* report tool id */
 	input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2]));
 	input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[4]));
 	input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
@@ -312,7 +332,8 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs)
 	}
 
 	input_regs(dev, regs);
-	input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID);
+	input_report_key(dev, BTN_TOOL_PEN, 1);
+	input_report_abs(dev, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
 	input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1]));
 	input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3]));
 	input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127);
@@ -350,6 +371,8 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		goto exit;
 	}
 
+	if (data[0] == 99) return; /* for Volito tablets */
+
 	if (data[0] != 2) {
 		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
 		goto exit;
@@ -374,10 +397,10 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 			case 2: /* Mouse with wheel */
 				input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
 				if (wacom->features->type == WACOM_G4) {
-					rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03);
-					input_report_rel(dev, REL_WHEEL, rw);
+					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
+					input_report_rel(dev, REL_WHEEL, -rw);
 				} else
-					input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
+					input_report_rel(dev, REL_WHEEL, -(signed char) data[6]);
 				/* fall through */
 
 			case 3: /* Mouse without wheel */
@@ -406,39 +429,27 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		}
 	}
 
-	input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0);
+	if (data[1] & 0x10)
+		input_report_abs(dev, ABS_MISC, id); /* report tool id */
+	else
+		input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
+	input_report_key(dev, wacom->tool[0], data[1] & 0x10);
 	input_sync(dev);
 
 	/* send pad data */
 	if (wacom->features->type == WACOM_G4) {
-		/* fist time sending pad data */
-		if (wacom->tool[1] != BTN_TOOL_FINGER) {
-			wacom->id[1] = 0;
-			wacom->serial[1] = (data[7] & 0x38) >> 2;
-		}
-		if (data[7] & 0xf8) {
+		if ((wacom->serial[1] & 0xc0) != (data[7] & 0xf8)) {
+			wacom->id[1] = 1;
+			wacom->serial[1] = (data[7] & 0xf8);
 			input_report_key(dev, BTN_0, (data[7] & 0x40));
 			input_report_key(dev, BTN_4, (data[7] & 0x80));
-			if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e))
-				/* alter REL_WHEEL value so X apps can get it */
-				wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1;
-			else
-				 wacom->serial[1] = (data[7] & 0x38 ) >> 2;
-
-			/* don't alter the value when there is no wheel event */
-			if (wacom->serial[1] == 1)
-				wacom->serial[1] = 0;
-			rw = wacom->serial[1];
-			rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07);
+			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
 			input_report_rel(dev, REL_WHEEL, rw);
-			wacom->tool[1] = BTN_TOOL_FINGER;
-			wacom->id[1] = data[7] & 0xf8;
-			input_report_key(dev, wacom->tool[1], 0xf0);
+			input_report_key(dev, BTN_TOOL_FINGER, 0xf0);
 			input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
 		} else if (wacom->id[1]) {
 			wacom->id[1] = 0;
-			wacom->serial[1] = 0;
-			input_report_key(dev, wacom->tool[1], 0);
+			input_report_key(dev, BTN_TOOL_FINGER, 0);
 			input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
 		}
 		input_sync(dev);
@@ -516,21 +527,31 @@ static int wacom_intuos_inout(struct urb *urb)
 			default: /* Unknown tool */
 				wacom->tool[idx] = BTN_TOOL_PEN;
 		}
-		input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
-		input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
-		input_sync(dev);
+		if(!((wacom->tool[idx] == BTN_TOOL_LENS) &&
+				((wacom->features->type == INTUOS312)
+					|| (wacom->features->type == INTUOS319)))) {
+			input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
+			input_report_key(dev, wacom->tool[idx], 1);
+			input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+			input_sync(dev);
+		}
 		return 1;
 	}
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
 		input_report_key(dev, wacom->tool[idx], 0);
+		input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
 		input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
 		input_sync(dev);
 		return 1;
 	}
 
-	return 0;
+	if((wacom->tool[idx] == BTN_TOOL_LENS) && ((wacom->features->type == INTUOS312)
+			|| (wacom->features->type == INTUOS319)))
+		return 1;
+	else
+		return 0;
 }
 
 static void wacom_intuos_general(struct urb *urb)
@@ -600,10 +621,9 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 	/* pad packets. Works as a second tool and is always in prox */
 	if (data[0] == 12) {
 		/* initiate the pad as a device */
-		if (wacom->tool[1] != BTN_TOOL_FINGER) {
+		if (wacom->tool[1] != BTN_TOOL_FINGER)
 			wacom->tool[1] = BTN_TOOL_FINGER;
-			input_report_key(dev, wacom->tool[1], 1);
-		}
+
 		input_report_key(dev, BTN_0, (data[5] & 0x01));
 		input_report_key(dev, BTN_1, (data[5] & 0x02));
 		input_report_key(dev, BTN_2, (data[5] & 0x04));
@@ -614,6 +634,11 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 		input_report_key(dev, BTN_7, (data[6] & 0x08));
 		input_report_abs(dev, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
 		input_report_abs(dev, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+
+		if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2])
+			input_report_key(dev, wacom->tool[1], 1);
+		else
+			input_report_key(dev, wacom->tool[1], 0);
 		input_event(dev, EV_MSC, MSC_SERIAL, 0xffffffff);
 		input_sync(dev);
 		goto exit;
@@ -676,8 +701,8 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 			input_report_key(dev, BTN_LEFT,   data[8] & 0x04);
 			input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
 			input_report_key(dev, BTN_RIGHT,  data[8] & 0x10);
-			input_report_rel(dev, REL_WHEEL, ((data[8] & 0x02) >> 1)
-						 - (data[8] & 0x01));
+			input_report_rel(dev, REL_WHEEL, (data[8] & 0x01)
+						 - ((data[8] & 0x02) >> 1));
 
 			/* I3 2D mouse side buttons */
 			if (wacom->features->type == INTUOS3) {
@@ -695,7 +720,8 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 		}
 	}
 
-	input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
+	input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
+	input_report_key(dev, wacom->tool[idx], 1);
 	input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
 	input_sync(dev);
 
@@ -733,7 +759,8 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom PL800",         8,   7220,  5780,  511, 32, PL,         wacom_pl_irq },
 	{ "Wacom PL700",         8,   6758,  5406,  511, 32, PL,	 wacom_pl_irq },
 	{ "Wacom PL510",         8,   6282,  4762,  511, 32, PL,	 wacom_pl_irq },
-	{ "Wacom PL710",         8,  34080, 27660,  511, 32, PL,	 wacom_pl_irq },
+	{ "Wacom DTU710",        8,  34080, 27660,  511, 32, PL,	 wacom_pl_irq },
+	{ "Wacom DTF521",        8,   6282,  4762,  511, 32, PL,         wacom_pl_irq },
 	{ "Wacom DTF720",        8,   6858,  5506,  511, 32, PL,	 wacom_pl_irq },
 	{ "Wacom Cintiq Partner",8,  20480, 15360,  511, 32, PL,         wacom_ptu_irq },
 	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 15, INTUOS,     wacom_intuos_irq },
@@ -744,6 +771,8 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Intuos3 4x5",   10, 25400, 20320, 1023, 15, INTUOS3,    wacom_intuos_irq },
 	{ "Wacom Intuos3 6x8",   10, 40640, 30480, 1023, 15, INTUOS3,    wacom_intuos_irq },
 	{ "Wacom Intuos3 9x12",  10, 60960, 45720, 1023, 15, INTUOS3,    wacom_intuos_irq },
+	{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS312,  wacom_intuos_irq },
+	{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS319,  wacom_intuos_irq },
 	{ "Wacom Intuos3 6x11",  10, 54204, 31750, 1023, 15, INTUOS3,    wacom_intuos_irq },
 	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 15, CINTIQ,     wacom_intuos_irq },
 	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 15, INTUOS,     wacom_intuos_irq },
@@ -779,6 +808,7 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC3) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
@@ -788,6 +818,8 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
@@ -820,7 +852,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	struct usb_endpoint_descriptor *endpoint;
 	struct wacom *wacom;
 	struct input_dev *input_dev;
-	char rep_data[2] = {0x02, 0x02};
+	char rep_data[2], limit = 0;
 
 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -857,6 +889,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	input_set_abs_params(input_dev, ABS_X, 0, wacom->features->x_max, 4, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
+	input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
 
 	switch (wacom->features->type) {
 		case WACOM_G4:
@@ -875,6 +908,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 			break;
 
 		case INTUOS3:
+		case INTUOS312:
+		case INTUOS319:
 		case CINTIQ:
 			input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
 			input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
@@ -916,10 +951,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	input_register_device(wacom->dev);
 
-	/* ask the tablet to report tablet data */
-	usb_set_report(intf, 3, 2, rep_data, 2);
-	/* repeat once (not sure why the first call often fails) */
-	usb_set_report(intf, 3, 2, rep_data, 2);
+	/* Ask the tablet to report tablet data. Repeat until it succeeds */
+	do {
+		rep_data[0] = 2;
+		rep_data[1] = 2;
+		usb_set_report(intf, 3, 2, rep_data, 2);
+		usb_get_report(intf, 3, 2, rep_data, 2);
+	} while (rep_data[1] != 2 && limit++ < 5);
 
 	usb_set_intfdata(intf, wacom);
 	return 0;
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 3824df33094..1fd9cb85f4c 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 			goto wraperr;
 		}
 	}
+	msleep(250);	/* let device settle */
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* return 1 to fail the driver inialization
 	 * and give real driver change to load */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 52fea2e08db..fe351371f27 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
 
@@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	kfree(buf);
 
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 9d59b901841..ccc5e8238bd 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -381,6 +381,7 @@ alloc_sglist (int nents, int max, int vary)
 
 	for (i = 0; i < nents; i++) {
 		char		*buf;
+		unsigned	j;
 
 		buf = kzalloc (size, SLAB_KERNEL);
 		if (!buf) {
@@ -391,6 +392,16 @@ alloc_sglist (int nents, int max, int vary)
 		/* kmalloc pages are always physically contiguous! */
 		sg_init_one(&sg[i], buf, size);
 
+		switch (pattern) {
+		case 0:
+			/* already zeroed */
+			break;
+		case 1:
+			for (j = 0; j < size; j++)
+				*buf++ = (u8) (j % 63);
+			break;
+		}
+
 		if (vary) {
 			size += vary;
 			size %= max;
@@ -425,6 +436,8 @@ static int perform_sglist (
 		usb_sg_wait (req);
 		retval = req->status;
 
+		/* FIXME check resulting data pattern */
+
 		/* FIXME if endpoint halted, clear halt (and log) */
 	}
 
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 3094970615c..12b599a0b53 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -37,7 +37,6 @@
 
 #include "usbnet.h"
 
-
 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
 
 #define AX_CMD_SET_SW_MII		0x06
@@ -109,7 +108,7 @@
 #define AX_EEPROM_MAGIC			0xdeadbeef
 
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct ax8817x_data {
+struct asix_data {
 	u8 multi_filter[AX_MCAST_FILTER_SIZE];
 };
 
@@ -121,7 +120,7 @@ struct ax88172_int_data {
 	u16 res3;
 } __attribute__ ((packed));
 
-static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 			    u16 size, void *data)
 {
 	return usb_control_msg(
@@ -136,7 +135,7 @@ static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 		USB_CTRL_GET_TIMEOUT);
 }
 
-static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 			     u16 size, void *data)
 {
 	return usb_control_msg(
@@ -151,19 +150,80 @@ static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 		USB_CTRL_SET_TIMEOUT);
 }
 
-static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
+static void asix_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
 {
 	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
 
 	if (urb->status < 0)
-		printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
+		printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
 			urb->status);
 
 	kfree(req);
 	usb_free_urb(urb);
 }
 
-static void ax8817x_status(struct usbnet *dev, struct urb *urb)
+static inline int asix_set_sw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		devdbg(dev, "Failed to enable software MII access");
+	return ret;
+}
+
+static inline int asix_set_hw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		devdbg(dev, "Failed to enable hardware MII access");
+	return ret;
+}
+
+static inline int asix_get_phyid(struct usbnet *dev)
+{
+	int ret = 0;
+	void *buf;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		goto out1;
+
+	if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
+				    0, 0, 2, buf)) < 2) {
+		devdbg(dev, "Error reading PHYID register: %02x", ret);
+		goto out2;
+	}
+	ret = *((u8 *)buf + 1);
+out2:
+	kfree(buf);
+out1:
+	return ret;
+}
+
+static int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+	int ret;
+
+        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	if (ret < 0)
+		devdbg(dev,"Failed to send software reset: %02x", ret);
+
+	return ret;
+}
+
+static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	if (ret < 0)
+                devdbg(dev, "Failed to write RX_CTL mode: %02x", ret);
+
+	return ret;
+}
+
+static void asix_status(struct usbnet *dev, struct urb *urb)
 {
 	struct ax88172_int_data *event;
 	int link;
@@ -179,12 +239,12 @@ static void ax8817x_status(struct usbnet *dev, struct urb *urb)
 			usbnet_defer_kevent (dev, EVENT_LINK_RESET );
 		} else
 			netif_carrier_off(dev->net);
-		devdbg(dev, "ax8817x - Link Status is: %d", link);
+		devdbg(dev, "Link Status is: %d", link);
 	}
 }
 
 static void
-ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 				    u16 size, void *data)
 {
 	struct usb_ctrlrequest *req;
@@ -211,7 +271,7 @@ ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	usb_fill_control_urb(urb, dev->udev,
 			     usb_sndctrlpipe(dev->udev, 0),
 			     (void *)req, data, size,
-			     ax8817x_async_cmd_callback, req);
+			     asix_async_cmd_callback, req);
 
 	if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
 		deverr(dev, "Error submitting the control message: status=%d",
@@ -221,10 +281,10 @@ ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	}
 }
 
-static void ax8817x_set_multicast(struct net_device *net)
+static void asix_set_multicast(struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
-	struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
+	struct asix_data *data = (struct asix_data *)&dev->data;
 	u8 rx_ctl = 0x8c;
 
 	if (net->flags & IFF_PROMISC) {
@@ -255,53 +315,51 @@ static void ax8817x_set_multicast(struct net_device *net)
 			mc_list = mc_list->next;
 		}
 
-		ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
 				   AX_MCAST_FILTER_SIZE, data->multi_filter);
 
 		rx_ctl |= 0x10;
 	}
 
-	ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
 }
 
-static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
+static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	u16 res;
-	u8 buf[1];
 
-	ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
-	ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+	asix_set_sw_mii(dev);
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 				(__u16)loc, 2, (u16 *)&res);
-	ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+	asix_set_hw_mii(dev);
 
 	return res & 0xffff;
 }
 
 /* same as above, but converts resulting value to cpu byte order */
-static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
+static int asix_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
 {
-	return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc));
+	return le16_to_cpu(asix_mdio_read(netdev,phy_id, loc));
 }
 
 static void
-ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	u16 res = val;
-	u8 buf[1];
 
-	ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
-	ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+	asix_set_sw_mii(dev);
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 				(__u16)loc, 2, (u16 *)&res);
-	ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+	asix_set_hw_mii(dev);
 }
 
 /* same as above, but converts new value to le16 byte order before writing */
 static void
-ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
+asix_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
 {
-	ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
+	asix_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
 }
 
 static int ax88172_link_reset(struct usbnet *dev)
@@ -312,23 +370,23 @@ static int ax88172_link_reset(struct usbnet *dev)
 	u8 mode;
 
 	mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
-	lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
-	adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+	lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+	adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
 	res = mii_nway_result(lpa|adv);
 	if (res & LPA_DUPLEX)
 		mode |= AX_MEDIUM_FULL_DUPLEX;
-	ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
 
 	return 0;
 }
 
 static void
-ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt;
 
-	if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
 		wolinfo->supported = 0;
 		wolinfo->wolopts = 0;
 		return;
@@ -344,7 +402,7 @@ ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 }
 
 static int
-ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
@@ -357,19 +415,19 @@ ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	if (opt != 0)
 		opt |= AX_MONITOR_MODE;
 
-	if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
 			      opt, 0, 0, &buf) < 0)
 		return -EINVAL;
 
 	return 0;
 }
 
-static int ax8817x_get_eeprom_len(struct net_device *net)
+static int asix_get_eeprom_len(struct net_device *net)
 {
 	return AX_EEPROM_LEN;
 }
 
-static int ax8817x_get_eeprom(struct net_device *net,
+static int asix_get_eeprom(struct net_device *net,
 			      struct ethtool_eeprom *eeprom, u8 *data)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -386,14 +444,14 @@ static int ax8817x_get_eeprom(struct net_device *net,
 
 	/* ax8817x returns 2 bytes from eeprom on read */
 	for (i=0; i < eeprom->len / 2; i++) {
-		if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
+		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
 			eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
 			return -EINVAL;
 	}
 	return 0;
 }
 
-static void ax8817x_get_drvinfo (struct net_device *net,
+static void asix_get_drvinfo (struct net_device *net,
 				 struct ethtool_drvinfo *info)
 {
 	/* Inherit standard device info */
@@ -401,14 +459,14 @@ static void ax8817x_get_drvinfo (struct net_device *net,
 	info->eedump_len = 0x3e;
 }
 
-static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
 
 	return mii_ethtool_gset(&dev->mii,cmd);
 }
 
-static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
 
@@ -418,27 +476,27 @@ static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
-static struct ethtool_ops ax8817x_ethtool_ops = {
-	.get_drvinfo		= ax8817x_get_drvinfo,
+static struct ethtool_ops ax88172_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
-	.get_wol		= ax8817x_get_wol,
-	.set_wol		= ax8817x_set_wol,
-	.get_eeprom_len		= ax8817x_get_eeprom_len,
-	.get_eeprom		= ax8817x_get_eeprom,
-	.get_settings		= ax8817x_get_settings,
-	.set_settings		= ax8817x_set_settings,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.get_settings		= asix_get_settings,
+	.set_settings		= asix_set_settings,
 };
 
-static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
 
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
-static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
+static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
 	void *buf;
@@ -455,55 +513,39 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
-		if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+		if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
 					(gpio_bits >> (i * 8)) & 0xff, 0, 0,
 					buf)) < 0)
 			goto out2;
 		msleep(5);
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
-				0x80, 0, 0, buf)) < 0) {
-		dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
+	if ((ret = asix_write_rx_ctl(dev,0x80)) < 0)
 		goto out2;
-	}
 
 	/* Get the MAC address */
 	memset(buf, 0, ETH_ALEN);
-	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID,
+	if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
 				0, 0, 6, buf)) < 0) {
 		dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
 		goto out2;
 	}
 	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
 
-	/* Get the PHY id */
-	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
-				0, 0, 2, buf)) < 0) {
-		dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
-		goto out2;
-	} else if (ret < 2) {
-		/* this should always return 2 bytes */
-		dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
-				ret);
-		ret = -EIO;
-		goto out2;
-	}
-
 	/* Initialize MII structure */
 	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = ax8817x_mdio_read;
-	dev->mii.mdio_write = ax8817x_mdio_write;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
 	dev->mii.phy_id_mask = 0x3f;
 	dev->mii.reg_num_mask = 0x1f;
-	dev->mii.phy_id = *((u8 *)buf + 1);
-	dev->net->do_ioctl = ax8817x_ioctl;
+	dev->mii.phy_id = asix_get_phyid(dev);
+	dev->net->do_ioctl = asix_ioctl;
 
-	dev->net->set_multicast_list = ax8817x_set_multicast;
-	dev->net->ethtool_ops = &ax8817x_ethtool_ops;
+	dev->net->set_multicast_list = asix_set_multicast;
+	dev->net->ethtool_ops = &ax88172_ethtool_ops;
 
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
 
@@ -515,16 +557,16 @@ out1:
 }
 
 static struct ethtool_ops ax88772_ethtool_ops = {
-	.get_drvinfo		= ax8817x_get_drvinfo,
+	.get_drvinfo		= asix_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
-	.get_wol		= ax8817x_get_wol,
-	.set_wol		= ax8817x_set_wol,
-	.get_eeprom_len		= ax8817x_get_eeprom_len,
-	.get_eeprom		= ax8817x_get_eeprom,
-	.get_settings		= ax8817x_get_settings,
-	.set_settings		= ax8817x_set_settings,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.get_settings		= asix_get_settings,
+	.set_settings		= asix_set_settings,
 };
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -541,62 +583,45 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 		goto out1;
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+	if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
 				     0x00B0, 0, 0, buf)) < 0)
 		goto out2;
 
 	msleep(5);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
+	if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
 				0x0001, 0, 0, buf)) < 0) {
 		dbg("Select PHY #1 failed: %d", ret);
 		goto out2;
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD,
-				0, 0, buf)) < 0) {
-		dbg("Failed to power down internal PHY: %d", ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD)) < 0)
 		goto out2;
-	}
 
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR,
-				0, 0, buf)) < 0) {
-		dbg("Failed to perform software reset: %d", ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_CLEAR)) < 0)
 		goto out2;
-	}
 
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
-	     			AX_SWRESET_IPRL | AX_SWRESET_PRL,
-				0, 0, buf)) < 0) {
-		dbg("Failed to set Internal/External PHY reset control: %d",
-					ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
 		goto out2;
-	}
 
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
-				0x0000, 0, 0, buf)) < 0) {
-		dbg("Failed to reset RX_CTL: %d", ret);
+	if ((ret = asix_write_rx_ctl(dev, 0x00)) < 0)
 		goto out2;
-	}
 
 	/* Get the MAC address */
 	memset(buf, 0, ETH_ALEN);
-	if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
+	if ((ret = asix_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
 				0, 0, ETH_ALEN, buf)) < 0) {
 		dbg("Failed to read MAC address: %d", ret);
 		goto out2;
 	}
 	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII,
-				0, 0, 0, buf)) < 0) {
-		dbg("Enabling software MII failed: %d", ret);
+	if ((ret = asix_set_sw_mii(dev)) < 0)
 		goto out2;
-	}
 
-	if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG,
+	if (((ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG,
 	      			0x0010, 2, 2, buf)) < 0)
 			|| (*((u16 *)buf) != 0x003b)) {
 		dbg("Read PHY register 2 must be 0x3b00: %d", ret);
@@ -605,74 +630,49 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	/* Initialize MII structure */
 	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = ax8817x_mdio_read;
-	dev->mii.mdio_write = ax8817x_mdio_write;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
 	dev->mii.phy_id_mask = 0xff;
 	dev->mii.reg_num_mask = 0xff;
-	dev->net->do_ioctl = ax8817x_ioctl;
+	dev->net->do_ioctl = asix_ioctl;
+	dev->mii.phy_id = asix_get_phyid(dev);
 
-	/* Get the PHY id */
-	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
-			0, 0, 2, buf)) < 0) {
-		dbg("Error reading PHY ID: %02x", ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
 		goto out2;
-	} else if (ret < 2) {
-		/* this should always return 2 bytes */
-		dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
-		    ret);
-		ret = -EIO;
-		goto out2;
-	}
-	dev->mii.phy_id = *((u8 *)buf + 1);
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL,
-				0, 0, buf)) < 0) {
-		dbg("Set external PHY reset pin level: %d", ret);
-		goto out2;
-	}
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
-	     			AX_SWRESET_IPRL | AX_SWRESET_PRL,
-				0, 0, buf)) < 0) {
-		dbg("Set Internal/External PHY reset control: %d", ret);
+
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
 		goto out2;
-	}
-	msleep(150);
 
+	msleep(150);
 
-	dev->net->set_multicast_list = ax8817x_set_multicast;
+	dev->net->set_multicast_list = asix_set_multicast;
 	dev->net->ethtool_ops = &ax88772_ethtool_ops;
 
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA);
 	mii_nway_restart(&dev->mii);
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+	if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
 				AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
 		dbg("Write medium mode register: %d", ret);
 		goto out2;
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0,
+	if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
 				AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
 		dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
 		goto out2;
 	}
-	if ((ret =
-	     ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
-		dbg("Failed to set hardware MII: %02x", ret);
+	if ((ret = asix_set_hw_mii(dev)) < 0)
 		goto out2;
-	}
 
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	if ((ret =
-	     ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
-			       buf)) < 0) {
-		dbg("Reset RX_CTL failed: %d", ret);
+	if ((ret = asix_write_rx_ctl(dev, 0x0088)) < 0)
 		goto out2;
-	}
 
 	kfree(buf);
 
@@ -794,23 +794,23 @@ static int ax88772_link_reset(struct usbnet *dev)
 	u16 mode;
 
 	mode = AX88772_MEDIUM_DEFAULT;
-	lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
-	adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+	lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+	adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
 	res = mii_nway_result(lpa|adv);
 
 	if ((res & LPA_DUPLEX) == 0)
 		mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
 	if ((res & LPA_100) == 0)
 		mode &= ~AX88772_MEDIUM_100MB;
-	ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
 
 	return 0;
 }
 
 static const struct driver_info ax8817x_info = {
 	.description = "ASIX AX8817x USB 2.0 Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -819,8 +819,8 @@ static const struct driver_info ax8817x_info = {
 
 static const struct driver_info dlink_dub_e100_info = {
 	.description = "DLink DUB-E100 USB Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -829,8 +829,8 @@ static const struct driver_info dlink_dub_e100_info = {
 
 static const struct driver_info netgear_fa120_info = {
 	.description = "Netgear FA-120 USB Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -839,8 +839,8 @@ static const struct driver_info netgear_fa120_info = {
 
 static const struct driver_info hawking_uf200_info = {
 	.description = "Hawking UF200 USB Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -850,13 +850,12 @@ static const struct driver_info hawking_uf200_info = {
 static const struct driver_info ax88772_info = {
 	.description = "ASIX AX88772 USB 2.0 Ethernet",
 	.bind = ax88772_bind,
-	.status = ax8817x_status,
+	.status = asix_status,
 	.link_reset = ax88772_link_reset,
 	.reset = ax88772_link_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
 	.rx_fixup = ax88772_rx_fixup,
 	.tx_fixup = ax88772_tx_fixup,
-	.data = 0x00130103,
 };
 
 static const struct usb_device_id	products [] = {
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 5b667568456..7683926a1b6 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -262,7 +262,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 	usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
 			     usb_sndctrlpipe(pegasus->usb, 0),
 			     (char *) &pegasus->dr,
-			     &tmp, 1, ctrl_callback, pegasus);
+			     tmp, 1, ctrl_callback, pegasus);
 
 	add_wait_queue(&pegasus->ctrl_wait, &wait);
 	set_current_state(TASK_UNINTERRUPTIBLE);
@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
 	set_register(pegasus, PhyCtrl, (indx | PHY_READ));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
 		*regd = le16_to_cpu(regdi);
 		return ret;
 	}
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 
@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
 	set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
 	if (i < REG_TIMEOUT)
 		return ret;
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
 		if (tmp & EPROM_DONE)
 			break;
+		if (ret == -ESHUTDOWN)
+			goto fail;
 	}
 	if (i < REG_TIMEOUT) {
 		ret = get_registers(pegasus, EpromData, 2, &retdatai);
@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
 		return ret;
 	}
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
 
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (tmp & EPROM_DONE)
 			break;
 	}
 	disable_eprom_write(pegasus);
 	if (i < REG_TIMEOUT)
 		return ret;
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
 	struct pegasus *pegasus = usb_get_intfdata(intf);
 	
 	netif_device_detach (pegasus->net);
+	cancel_delayed_work(&pegasus->carrier_check);
 	if (netif_running(pegasus->net)) {
-		cancel_delayed_work(&pegasus->carrier_check);
-
 		usb_kill_urb(pegasus->rx_urb);
 		usb_kill_urb(pegasus->intr_urb);
 	}
@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf)
 		pegasus->intr_urb->status = 0;
 		pegasus->intr_urb->actual_length = 0;
 		intr_callback(pegasus->intr_urb, NULL);
-
-		queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-					CARRIER_CHECK_DELAY);
 	}
+	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+				CARRIER_CHECK_DELAY);
 	return 0;
 }
 
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index 49991ac1bf3..94ddfe16fdd 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -39,6 +39,20 @@
  * RNDIS is NDIS remoted over USB.  It's a MSFT variant of CDC ACM ... of
  * course ACM was intended for modems, not Ethernet links!  USB's standard
  * for Ethernet links is "CDC Ethernet", which is significantly simpler.
+ *
+ * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete.  Issues
+ * include:
+ *    - Power management in particular relies on information that's scattered
+ *	through other documentation, and which is incomplete or incorrect even
+ *	there.
+ *    - There are various undocumented protocol requirements, such as the
+ *	need to send unused garbage in control-OUT messages.
+ *    - In some cases, MS-Windows will emit undocumented requests; this
+ *	matters more to peripheral implementations than host ones.
+ *
+ * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
+ * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
+ * currently rare) "Ethernet Emulation Model" (EEM).
  */
 
 /*
@@ -72,17 +86,17 @@ struct rndis_msg_hdr {
  */
 #define RNDIS_MSG_PACKET	ccpu2(0x00000001)	/* 1-N packets */
 #define RNDIS_MSG_INIT		ccpu2(0x00000002)
-#define RNDIS_MSG_INIT_C 	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_HALT		ccpu2(0x00000003)
 #define RNDIS_MSG_QUERY		ccpu2(0x00000004)
-#define RNDIS_MSG_QUERY_C 	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_SET		ccpu2(0x00000005)
-#define RNDIS_MSG_SET_C 	(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_RESET		ccpu2(0x00000006)
-#define RNDIS_MSG_RESET_C 	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_INDICATE	ccpu2(0x00000007)
 #define RNDIS_MSG_KEEPALIVE	ccpu2(0x00000008)
-#define RNDIS_MSG_KEEPALIVE_C 	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
 
 /* codes for "status" field of completion messages */
 #define	RNDIS_STATUS_SUCCESS		ccpu2(0x00000000)
@@ -596,13 +610,13 @@ static struct usb_driver rndis_driver = {
 
 static int __init rndis_init(void)
 {
- 	return usb_register(&rndis_driver);
+	return usb_register(&rndis_driver);
 }
 module_init(rndis_init);
 
 static void __exit rndis_exit(void)
 {
- 	usb_deregister(&rndis_driver);
+	usb_deregister(&rndis_driver);
 }
 module_exit(rndis_exit);
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 5a8a2c91c2b..5c60be52156 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
 	  To compile this driver as a module, choose M here: the
 	  module will be called anydata.
 
+config USB_SERIAL_ARK3116
+	tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+	depends on USB_SERIAL && EXPERIMENTAL
+	help
+	  Say Y here if you want to use a ARK Micro 3116 USB to Serial
+	  device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ark3116
+
 config USB_SERIAL_BELKIN
 	tristate "USB Belkin and Peracom Single Port Serial Driver"
 	depends on USB_SERIAL
@@ -158,6 +168,15 @@ config USB_SERIAL_FTDI_SIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called ftdi_sio.
 
+config USB_SERIAL_FUNSOFT
+	tristate "USB Fundamental Software Dongle Driver"
+	depends on USB_SERIAL
+	---help---
+	  Say Y here if you want to use the Fundamental Software dongle.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called funsoft.
+
 config USB_SERIAL_VISOR
 	tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 	depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f7fe4172efe..5a0960fc9d3 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -13,6 +13,7 @@ usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)		+= airprime.o
 obj-$(CONFIG_USB_SERIAL_ANYDATA)		+= anydata.o
+obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
@@ -22,6 +23,7 @@ obj-$(CONFIG_USB_SERIAL_EDGEPORT)		+= io_edgeport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)		+= io_ti.o
 obj-$(CONFIG_USB_SERIAL_EMPEG)			+= empeg.o
 obj-$(CONFIG_USB_SERIAL_FTDI_SIO)		+= ftdi_sio.o
+obj-$(CONFIG_USB_SERIAL_FUNSOFT)		+= funsoft.o
 obj-$(CONFIG_USB_SERIAL_GARMIN)			+= garmin_gps.o
 obj-$(CONFIG_USB_SERIAL_HP4X)			+= hp4x.o
 obj-$(CONFIG_USB_SERIAL_IPAQ)			+= ipaq.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index dbf1f063098..694b205f9b7 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,6 +18,7 @@
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
 	{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
new file mode 100644
index 00000000000..8dec796222a
--- /dev/null
+++ b/drivers/usb/serial/ark3116.c
@@ -0,0 +1,465 @@
+/*
+ * ark3116
+ * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
+ *   productid=0x0232) (used in a datacable called KQ-U8A)
+ *
+ * - based on code by krisfx -> thanks !!
+ *   (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
+ *
+ *  - based on logs created by usbsnoopy
+ *
+ *  Author   : Simon Schulz [ark3116_driver<AT>auctionant.de]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x6547, 0x0232) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ark3116_private {
+	spinlock_t lock;
+	u8 termios_initialized;
+};
+
+static inline void ARK3116_SND(struct usb_serial *serial, int seq,
+			       __u8 request, __u8 requesttype,
+			       __u16 value, __u16 index)
+{
+	int result;
+	result = usb_control_msg(serial->dev,
+				 usb_sndctrlpipe(serial->dev,0),
+				 request, requesttype, value, index,
+				 NULL,0x00, 1000);
+	dbg("%03d > ok",seq);
+}
+
+static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
+			       __u8 request, __u8 requesttype,
+			       __u16 value, __u16 index, __u8 expected,
+			       char *buf)
+{
+	int result;
+	result = usb_control_msg(serial->dev,
+			      usb_rcvctrlpipe(serial->dev,0),
+			      request, requesttype, value, index,
+			      buf, 0x0000001, 1000);
+	if (result)
+		dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+	else
+		dbg("%03d < 0 bytes", seq);
+}
+
+
+static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
+				     __u8 request, __u8 requesttype,
+				     __u16 value, __u16 index, char *buf)
+{
+	usb_control_msg(serial->dev,
+			usb_rcvctrlpipe(serial->dev,0),
+			request, requesttype, value, index,
+			buf, 0x0000001, 1000);
+}
+
+
+static int ark3116_attach(struct usb_serial *serial)
+{
+	char *buf;
+	struct ark3116_private *priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+		if (!priv)
+			goto cleanup;
+		memset (priv, 0x00, sizeof (struct ark3116_private));
+		spin_lock_init(&priv->lock);
+
+		usb_set_serial_port_data(serial->port[i], priv);
+	}
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc -> out of mem ?");
+		goto cleanup;
+	}
+
+	/* 3 */
+	ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
+	ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
+	ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
+	ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+
+	/* <-- seq7 */
+	ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
+	ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
+	ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
+	ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
+	ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+
+	/* <-- seq12 */
+	ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+
+	/* 14 */
+	ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+
+	/* 16 */
+	ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	/* --> seq17 */
+	ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+
+	/* <-- seq18 */
+	ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+	/* --> seq19 */
+	ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
+
+
+	/* <-- seq20 */
+	/* seems like serial port status info (RTS, CTS,...) */
+	/* returns modem control line status ?! */
+	ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+	/* set 9600 baud & do some init ?! */
+	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+	ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
+	ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
+	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+	ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+
+	kfree(buf);
+	return(0);
+
+cleanup:
+	for (--i; i>=0; --i)
+		usb_set_serial_port_data(serial->port[i], NULL);
+	return -ENOMEM;
+}
+
+static void ark3116_set_termios(struct usb_serial_port *port,
+				struct termios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	unsigned int cflag = port->tty->termios->c_cflag;
+	unsigned long flags;
+	int baud;
+	int ark3116_baud;
+	char *buf;
+	char config;
+
+	config = 0;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if ((!port->tty) || (!port->tty->termios)) {
+		dbg("%s - no tty structures", __FUNCTION__);
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!priv->termios_initialized) {
+		*(port->tty->termios) = tty_std_termios;
+		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		priv->termios_initialized = 1;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	cflag = port->tty->termios->c_cflag;
+
+	/* check that they really want us to change something: */
+	if (old_termios) {
+		if ((cflag == old_termios->c_cflag) &&
+		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+		     RELEVANT_IFLAG(old_termios->c_iflag))) {
+			dbg("%s - nothing to change...", __FUNCTION__);
+			return;
+		}
+	}
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc");
+		return;
+	}
+
+	/* set data bit count (8/7/6/5) */
+	if (cflag & CSIZE){
+		switch (cflag & CSIZE){
+		case CS5:
+			config |= 0x00;
+			dbg("setting CS5");
+			break;
+		case CS6:
+			config |= 0x01;
+			dbg("setting CS6");
+			break;
+		case CS7:
+			config |= 0x02;
+			dbg("setting CS7");
+			break;
+		default:
+			err ("CSIZE was set but not CS5-CS8, using CS8!");
+		case CS8:
+			config |= 0x03;
+			dbg("setting CS8");
+			break;
+		}
+	}
+
+	/* set parity (NONE,EVEN,ODD) */
+	if (cflag & PARENB){
+		if (cflag & PARODD) {
+			config |= 0x08;
+			dbg("setting parity to ODD");
+		} else {
+			config |= 0x18;
+			dbg("setting parity to EVEN");
+		}
+	} else {
+		dbg("setting parity to NONE");
+	}
+
+	/* SET STOPBIT (1/2) */
+	if (cflag & CSTOPB) {
+		config |= 0x04;
+		dbg ("setting 2 stop bits");
+	} else {
+		dbg ("setting 1 stop bit");
+	}
+
+
+	/* set baudrate: */
+	baud = 0;
+	switch (cflag & CBAUD){
+		case B0:
+			err("can't set 0baud, using 9600 instead");
+			break;
+		case B75:	baud = 75;	break;
+		case B150:	baud = 150;	break;
+		case B300:	baud = 300;	break;
+		case B600:	baud = 600;	break;
+		case B1200:	baud = 1200;	break;
+		case B1800:	baud = 1800;	break;
+		case B2400:	baud = 2400;	break;
+		case B4800:	baud = 4800;	break;
+		case B9600:	baud = 9600;	break;
+		case B19200:	baud = 19200;	break;
+		case B38400:	baud = 38400;	break;
+		case B57600:	baud = 57600;	break;
+		case B115200:	baud = 115200;	break;
+		case B230400:	baud = 230400;	break;
+		case B460800:	baud = 460800;	break;
+		default:
+			dbg("does not support the baudrate requested (fix it)");
+			break;
+	}
+
+	/* set 9600 as default (if given baudrate is invalid for example) */
+	if (baud == 0)
+		baud = 9600;
+
+	/*
+	 * found by try'n'error, be careful, maybe there are other options
+	 * for multiplicator etc!
+	 */
+	if (baud == 460800)
+		/* strange, for 460800 the formula is wrong
+		 * (dont use round(), then 9600baud is wrong) */
+		ark3116_baud = 7;
+	else
+		ark3116_baud = 3000000 / baud;
+
+	/* ? */
+	ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+	/* offset = buf[0]; */
+	/* offset = 0x03; */
+	/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
+
+
+	/* set baudrate */
+	dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
+	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+	ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF)   ,0x0000);
+	ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
+	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+
+	/* ? */
+	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+
+	/* set data bit count, stop bit count & parity: */
+	dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
+	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+	ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+
+	if (cflag & CRTSCTS)
+		dbg("CRTSCTS not supported by chipset ?!");
+
+	/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+
+	kfree(buf);
+	return;
+}
+
+static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+{
+	struct termios tmp_termios;
+	struct usb_serial *serial = port->serial;
+	char *buf;
+	int result = 0;
+
+	dbg("%s -  port %d", __FUNCTION__, port->number);
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc -> out of mem ?");
+		return -ENOMEM;
+	}
+
+	result = usb_serial_generic_open(port, filp);
+	if (result)
+		return result;
+
+	/* open */
+	ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+
+	ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
+	ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
+	ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
+	ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+
+	ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
+	ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+
+	ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
+	ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+
+	ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+
+	ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+
+	ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+	ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+
+	/* returns different values (control lines ?!) */
+	ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+	/* initialise termios: */
+	if (port->tty)
+		ark3116_set_termios(port, &tmp_termios);
+
+	kfree(buf);
+
+	return result;
+
+}
+
+static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+			 unsigned int cmd, unsigned long arg)
+{
+	dbg("ioctl not supported yet...");
+	return -ENOIOCTLCMD;
+}
+
+static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+	struct usb_serial *serial = port->serial;
+	char *buf;
+	char temp;
+
+	/* seems like serial port status info (RTS, CTS,...) is stored
+	 * in reg(?) 0x0006
+	 * pcb connection point 11 = GND -> sets bit4 of response
+	 * pcb connection point  7 = GND -> sets bit6 of response
+	 */
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc");
+		return -ENOMEM;
+	}
+
+	/* read register: */
+	ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+	temp = buf[0];
+	kfree(buf);
+
+	/* i do not really know if bit4=CTS and bit6=DSR... was just a
+	 * quick guess !!
+	 */
+	return  (temp & (1<<4) ? TIOCM_CTS : 0) |
+	        (temp & (1<<6) ? TIOCM_DSR : 0);
+}
+
+static struct usb_driver ark3116_driver = {
+	.name =		"ark3116",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+};
+
+static struct usb_serial_driver ark3116_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ark3116",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	1,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.num_ports =		1,
+	.attach =		ark3116_attach,
+	.set_termios =		ark3116_set_termios,
+	.ioctl =		ark3116_ioctl,
+	.tiocmget =		ark3116_tiocmget,
+	.open =			ark3116_open,
+};
+
+static int __init ark3116_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&ark3116_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&ark3116_driver);
+	if (retval)
+		usb_serial_deregister(&ark3116_device);
+	return retval;
+}
+
+static void __exit ark3116_exit(void)
+{
+	usb_deregister(&ark3116_driver);
+	usb_serial_deregister(&ark3116_device);
+}
+
+module_init(ark3116_init);
+module_exit(ark3116_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 167f8ec5613..8023bb7279b 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -54,7 +54,7 @@ static struct console usbcons;
  * serial.c code, except that the specifier is "ttyUSB" instead
  * of "ttyS".
  */
-static int __init usb_console_setup(struct console *co, char *options)
+static int usb_console_setup(struct console *co, char *options)
 {
 	struct usbcons_info *info = &usbcons_info;
 	int baud = 9600;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f3af81b4dd2..986d7622273 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -307,7 +307,9 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
@@ -489,10 +491,15 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
 	{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
 	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8da773c2744..d69a917e768 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -32,6 +32,10 @@
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
 
+/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -39,6 +43,9 @@
 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
 
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
@@ -153,6 +160,11 @@
 #define ICOM_ID1_PID            0x0004
 
 /*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
+
+/*
  * DSS-20 Sync Station for Sony Ericsson P800
  */
  
@@ -399,6 +411,31 @@
 #define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
 #define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
 
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
new file mode 100644
index 00000000000..803721b97e2
--- /dev/null
+++ b/drivers/usb/serial/funsoft.c
@@ -0,0 +1,65 @@
+/*
+ * Funsoft Serial USB driver
+ *
+ * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x1404, 0xcddc) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver funsoft_driver = {
+	.name =		"funsoft",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id = 	1,
+};
+
+static struct usb_serial_driver funsoft_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"funsoft",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	NUM_DONT_CARE,
+	.num_bulk_in =		NUM_DONT_CARE,
+	.num_bulk_out =		NUM_DONT_CARE,
+	.num_ports =		1,
+};
+
+static int __init funsoft_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&funsoft_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&funsoft_driver);
+	if (retval)
+		usb_serial_deregister(&funsoft_device);
+	return retval;
+}
+
+static void __exit funsoft_exit(void)
+{
+	usb_deregister(&funsoft_driver);
+	usb_serial_deregister(&funsoft_device);
+}
+
+module_init(funsoft_init);
+module_exit(funsoft_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 476cda107f4..c62cc287651 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
 static void generic_cleanup (struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 4d40704dea2..238033a8709 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 		return (0);
 	}
 
-	spin_lock(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+	spin_lock(&wport->lock);
+	if (wport->write_urb_busy) {
+		spin_unlock(&wport->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
-	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	wport->write_urb_busy = 1;
+	spin_unlock(&wport->lock);
 
 	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 
@@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 	wport->write_urb->dev = serial->dev;
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
-		port->write_urb_busy = 0;
+		wport->write_urb_busy = 0;
 		err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
 	} else
 		result = count;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index b3014fda645..c96714bb1cb 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -61,6 +61,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
 	{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+	{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
 	{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
 	{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
@@ -78,6 +79,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
 	{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
 	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+	{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 77901d14397..7f29e81d3e3 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -26,6 +26,7 @@
 
 #define ITEGNO_VENDOR_ID	0x0eba
 #define ITEGNO_PRODUCT_ID	0x1080
+#define ITEGNO_PRODUCT_ID_2080	0x2080
 
 #define MA620_VENDOR_ID		0x0df7
 #define MA620_PRODUCT_ID	0x0620
@@ -79,3 +80,7 @@
 /* USB GSM cable from Speed Dragon Multimedia, Ltd */
 #define SPEEDDRAGON_VENDOR_ID	0x0e55
 #define SPEEDDRAGON_PRODUCT_ID	0x110b
+
+/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
+#define OTI_VENDOR_ID	0x0ea0
+#define OTI_PRODUCT_ID	0x6858
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 097f4e8488f..9c36f0ece20 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -27,10 +27,10 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/smp_lock.h>
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 #include <linux/usb.h>
 #include "usb-serial.h"
 #include "pl2303.h"
@@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 
 	portNumber = tty->index - serial->minor;
 	port = serial->port[portNumber];
-	if (!port)
-		return -ENODEV;
+	if (!port) {
+		retval = -ENODEV;
+		goto bailout_kref_put;
+	}
 
-	if (down_interruptible(&port->sem))
-		return -ERESTARTSYS;
+	if (mutex_lock_interruptible(&port->mutex)) {
+		retval = -ERESTARTSYS;
+		goto bailout_kref_put;
+	}
 	 
 	++port->open_count;
 
@@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 		 * safe because we are called with BKL held */
 		if (!try_module_get(serial->type->driver.owner)) {
 			retval = -ENODEV;
-			goto bailout_kref_put;
+			goto bailout_mutex_unlock;
 		}
 
 		/* only call the device specific open if this 
@@ -219,15 +223,16 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 			goto bailout_module_put;
 	}
 
-	up(&port->sem);
+	mutex_unlock(&port->mutex);
 	return 0;
 
 bailout_module_put:
 	module_put(serial->type->driver.owner);
+bailout_mutex_unlock:
+	port->open_count = 0;
+	mutex_unlock(&port->mutex);
 bailout_kref_put:
 	kref_put(&serial->kref, destroy_serial);
-	port->open_count = 0;
-	up(&port->sem);
 	return retval;
 }
 
@@ -240,10 +245,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	down(&port->sem);
+	mutex_lock(&port->mutex);
 
 	if (port->open_count == 0) {
-		up(&port->sem);
+		mutex_unlock(&port->mutex);
 		return;
 	}
 
@@ -262,7 +267,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 		module_put(port->serial->type->driver.owner);
 	}
 
-	up(&port->sem);
+	mutex_unlock(&port->mutex);
 	kref_put(&port->serial->kref, destroy_serial);
 }
 
@@ -783,7 +788,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		port->number = i + serial->minor;
 		port->serial = serial;
 		spin_lock_init(&port->lock);
-		sema_init(&port->sem, 1);
+		mutex_init(&port->mutex);
 		INIT_WORK(&port->work, usb_serial_port_softint, port);
 		serial->port[i] = port;
 	}
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index d7d27c3385b..dc89d871046 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -16,7 +16,7 @@
 
 #include <linux/config.h>
 #include <linux/kref.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 
 #define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
 #define SERIAL_TTY_MINORS	255	/* loads of devices :) */
@@ -31,7 +31,7 @@
  * @serial: pointer back to the struct usb_serial owner of this port.
  * @tty: pointer to the corresponding tty for this port.
  * @lock: spinlock to grab when updating portions of this structure.
- * @sem: semaphore used to synchronize serial_open() and serial_close()
+ * @mutex: mutex used to synchronize serial_open() and serial_close()
  *	access for this port.
  * @number: the number of the port (the minor number).
  * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
@@ -63,7 +63,7 @@ struct usb_serial_port {
 	struct usb_serial *	serial;
 	struct tty_struct *	tty;
 	spinlock_t		lock;
-	struct semaphore        sem;
+	struct mutex            mutex;
 	unsigned char		number;
 
 	unsigned char *		interrupt_in_buffer;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 557411c6e7c..f806553cd9a 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -508,6 +508,7 @@ no_firmware:
 	err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
 	err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
 	err("%s: please contact support@connecttech.com\n", serial->type->description);
+	kfree(result);
 	return -ENODEV;
 
 no_command_private:
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 92be101feba..be9eec22574 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -48,7 +48,8 @@ config USB_STORAGE_FREECOM
 
 config USB_STORAGE_ISD200
 	bool "ISD-200 USB/ATA Bridge support"
-	depends on USB_STORAGE && BLK_DEV_IDE
+	depends on USB_STORAGE
+	depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
 	---help---
 	  Say Y here if you want to use USB Mass Store devices based
 	  on the In-Systems Design ISD-200 USB/ATA bridge.
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c4a9dcff5f2..aec5ea8682d 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -411,7 +411,7 @@ UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
 		"Iomega",
 		"USB Clik! 40",
-		US_SC_8070, US_PR_BULK, NULL,
+		US_SC_8070, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Yakumo Mega Image 37
@@ -773,6 +773,13 @@ UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
+UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
+		"ATMEL",
+		"SND1 Storage",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE),
+
 /* Submitted by Roman Hodek <roman@hodek.net> */
 UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
 		"Sandisk",
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9060e713744..4587087d777 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -400,6 +400,8 @@ config FB_ASILIANT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Asiliant 69030 chipset
 
 config FB_IMSTT
 	bool "IMS Twin Turbo display support"
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 9a6b5b39b88..387a18a47ac 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2265,7 +2265,7 @@ static struct bin_attribute edid2_attr = {
 };
 
 
-static int radeonfb_pci_register (struct pci_dev *pdev,
+static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
 {
 	struct fb_info *info;
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 3d04b2def0f..789450bb0bc 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -214,10 +214,13 @@ int au1100fb_setmode(struct au1100fb_device *fbdev)
  */
 int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
 {
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-	u32 *palette = fbdev->regs->lcd_pallettebase;
+	struct au1100fb_device *fbdev;
+	u32 *palette;
 	u32 value;
 
+	fbdev = to_au1100fb_device(fbi);
+	palette = fbdev->regs->lcd_pallettebase;
+
 	if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
 		return -EINVAL;
 
@@ -316,9 +319,11 @@ int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
  */
 int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
 {
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+	struct au1100fb_device *fbdev;
 	int dy;
 
+	fbdev = to_au1100fb_device(fbi);
+
 	print_dbg("fb_pan_display %p %p", var, fbi);
 
 	if (!var || !fbdev) {
@@ -382,10 +387,12 @@ void au1100fb_fb_rotate(struct fb_info *fbi, int angle)
  */
 int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 {
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+	struct au1100fb_device *fbdev;
 	unsigned int len;
 	unsigned long start=0, off;
 
+	fbdev = to_au1100fb_device(fbi);
+
 	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
 		return -EINVAL;
 	}
@@ -467,7 +474,7 @@ int au1100fb_drv_probe(struct device *dev)
 
 	if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
 				DRIVER_NAME)) {
-		print_err("fail to lock memory region at 0x%08x",
+		print_err("fail to lock memory region at 0x%08lx",
 				au1100fb_fix.mmio_start);
 		return -EBUSY;
 	}
@@ -595,13 +602,13 @@ int au1100fb_drv_remove(struct device *dev)
 	return 0;
 }
 
-int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+int au1100fb_drv_suspend(struct device *dev, pm_message_t state)
 {
 	/* TODO */
 	return 0;
 }
 
-int au1100fb_drv_resume(struct device *dev, u32 level)
+int au1100fb_drv_resume(struct device *dev)
 {
 	/* TODO */
 	return 0;
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index b367de30b98..600d3e0e08b 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1920,1925 +1920,3 @@ module_exit(au1200fb_cleanup);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1200 LCD Driver.
- *
- * Copyright 2004-2005 AMD
- * Author: AMD
- *
- * Based on:
- * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
- *  Created 28 Dec 1997 by Geert Uytterhoeven
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ctype.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include "au1200fb.h"
-
-#ifdef CONFIG_PM
-#include <asm/mach-au1x00/au1xxx_pm.h>
-#endif
-
-#ifndef CONFIG_FB_AU1200_DEVS
-#define CONFIG_FB_AU1200_DEVS 4
-#endif
-
-#define DRIVER_NAME "au1200fb"
-#define DRIVER_DESC "LCD controller driver for AU1200 processors"
-
-#define DEBUG 1
-
-#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
-#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
-#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
-
-#if DEBUG
-#define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg)
-#else
-#define print_dbg(f, arg...) do {} while (0)
-#endif
-
-
-#define AU1200_LCD_FB_IOCTL 0x46FF
-
-#define AU1200_LCD_SET_SCREEN 1
-#define AU1200_LCD_GET_SCREEN 2
-#define AU1200_LCD_SET_WINDOW 3
-#define AU1200_LCD_GET_WINDOW 4
-#define AU1200_LCD_SET_PANEL  5
-#define AU1200_LCD_GET_PANEL  6
-
-#define SCREEN_SIZE		    (1<< 1)
-#define SCREEN_BACKCOLOR    (1<< 2)
-#define SCREEN_BRIGHTNESS   (1<< 3)
-#define SCREEN_COLORKEY     (1<< 4)
-#define SCREEN_MASK         (1<< 5)
-
-struct au1200_lcd_global_regs_t {
-	unsigned int flags;
-	unsigned int xsize;
-	unsigned int ysize;
-	unsigned int backcolor;
-	unsigned int brightness;
-	unsigned int colorkey;
-	unsigned int mask;
-	unsigned int panel_choice;
-	char panel_desc[80];
-
-};
-
-#define WIN_POSITION            (1<< 0)
-#define WIN_ALPHA_COLOR         (1<< 1)
-#define WIN_ALPHA_MODE          (1<< 2)
-#define WIN_PRIORITY            (1<< 3)
-#define WIN_CHANNEL             (1<< 4)
-#define WIN_BUFFER_FORMAT       (1<< 5)
-#define WIN_COLOR_ORDER         (1<< 6)
-#define WIN_PIXEL_ORDER         (1<< 7)
-#define WIN_SIZE                (1<< 8)
-#define WIN_COLORKEY_MODE       (1<< 9)
-#define WIN_DOUBLE_BUFFER_MODE  (1<< 10)
-#define WIN_RAM_ARRAY_MODE      (1<< 11)
-#define WIN_BUFFER_SCALE        (1<< 12)
-#define WIN_ENABLE	            (1<< 13)
-
-struct au1200_lcd_window_regs_t {
-	unsigned int flags;
-	unsigned int xpos;
-	unsigned int ypos;
-	unsigned int alpha_color;
-	unsigned int alpha_mode;
-	unsigned int priority;
-	unsigned int channel;
-	unsigned int buffer_format;
-	unsigned int color_order;
-	unsigned int pixel_order;
-	unsigned int xsize;
-	unsigned int ysize;
-	unsigned int colorkey_mode;
-	unsigned int double_buffer_mode;
-	unsigned int ram_array_mode;
-	unsigned int xscale;
-	unsigned int yscale;
-	unsigned int enable;
-};
-
-
-struct au1200_lcd_iodata_t {
-	unsigned int subcmd;
-	struct au1200_lcd_global_regs_t global;
-	struct au1200_lcd_window_regs_t window;
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
-#else
-#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
-#endif
-#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
-
-/* Private, per-framebuffer management information (independent of the panel itself) */
-struct au1200fb_device {
-	struct fb_info fb_info;			/* FB driver info record */
-
-	int					plane;
-	unsigned char* 		fb_mem;		/* FrameBuffer memory map */
-	unsigned int		fb_len;
-	dma_addr_t    		fb_phys;
-};
-
-static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
-/********************************************************************/
-
-/* LCD controller restrictions */
-#define AU1200_LCD_MAX_XRES	1280
-#define AU1200_LCD_MAX_YRES	1024
-#define AU1200_LCD_MAX_BPP	32
-#define AU1200_LCD_MAX_CLK	96000000 /* fixme: this needs to go away ? */
-#define AU1200_LCD_NBR_PALETTE_ENTRIES 256
-
-/* Default number of visible screen buffer to allocate */
-#define AU1200FB_NBR_VIDEO_BUFFERS 1
-
-/********************************************************************/
-
-static struct au1200_lcd *lcd = (struct au1200_lcd *) AU1200_LCD_ADDR;
-static int window_index = 2; /* default is zero */
-static int panel_index = 2; /* default is zero */
-static struct window_settings *win;
-static struct panel_settings *panel;
-static int noblanking = 1;
-static int nohwcursor = 0;
-
-struct window_settings {
-	unsigned char name[64];
-	uint32 mode_backcolor;
-	uint32 mode_colorkey;
-	uint32 mode_colorkeymsk;
-	struct {
-		int xres;
-		int yres;
-		int xpos;
-		int ypos;
-		uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
-		uint32 mode_winenable;
-	} w[4];
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
-#else
-#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
-#endif
-
-extern int board_au1200fb_panel_init (void);
-extern int board_au1200fb_panel_shutdown (void);
-
-#ifdef CONFIG_PM
-int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
-		au1xxx_request_t request, void *data);
-au1xxx_power_dev_t *LCD_pm_dev;
-#endif
-
-/*
- * Default window configurations
- */
-static struct window_settings windows[] = {
-	{ /* Index 0 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 100, 100, 100, 100,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ LCD_WINENABLE_WEN1,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-
-	{ /* Index 1 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 320, 240, 5, 5,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP |
-				LCD_WINCTRL1_PO_00,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565
-				| LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 100, 100, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 200, 25, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-	{ /* Index 2 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_32BPP |
-				LCD_WINCTRL1_PO_00|LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-	/* Need VGA 640 @ 24bpp, @ 32bpp */
-	/* Need VGA 800 @ 24bpp, @ 32bpp */
-	/* Need VGA 1024 @ 24bpp, @ 32bpp */
-};
-
-/*
- * Controller configurations for various panels.
- */
-
-struct panel_settings
-{
-	const char name[25];		/* Full name <vendor>_<model> */
-
-	struct 	fb_monspecs monspecs; 	/* FB monitor specs */
-
-	/* panel timings */
-	uint32 mode_screen;
-	uint32 mode_horztiming;
-	uint32 mode_verttiming;
-	uint32 mode_clkcontrol;
-	uint32 mode_pwmdiv;
-	uint32 mode_pwmhi;
-	uint32 mode_outmask;
-	uint32 mode_fifoctrl;
-	uint32 mode_toyclksrc;
-	uint32 mode_backlight;
-	uint32 mode_auxpll;
-	int (*device_init)(void);
-	int (*device_shutdown)(void);
-#define Xres min_xres
-#define Yres min_yres
-	u32	min_xres;		/* Minimum horizontal resolution */
-	u32	max_xres;		/* Maximum horizontal resolution */
-	u32 	min_yres;		/* Minimum vertical resolution */
-	u32 	max_yres;		/* Maximum vertical resolution */
-};
-
-/********************************************************************/
-/* fixme: Maybe a modedb for the CRT ? otherwise panels should be as-is */
-
-/* List of panels known to work with the AU1200 LCD controller.
- * To add a new panel, enter the same specifications as the
- * Generic_TFT one, and MAKE SURE that it doesn't conflicts
- * with the controller restrictions. Restrictions are:
- *
- * STN color panels: max_bpp <= 12
- * STN mono panels: max_bpp <= 4
- * TFT panels: max_bpp <= 16
- * max_xres <= 800
- * max_yres <= 600
- */
-static struct panel_settings known_lcd_panels[] =
-{
-	[0] = { /* QVGA 320x240 H:33.3kHz V:110Hz */
-		.name = "QVGA_320x240",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(320) |
-			LCD_SCREEN_SY_N(240),
-		.mode_horztiming	= 0x00c4623b,
-		.mode_verttiming	= 0x00502814,
-		.mode_clkcontrol	= 0x00020002, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		320, 320,
-		240, 240,
-	},
-
-	[1] = { /* VGA 640x480 H:30.3kHz V:58Hz */
-		.name = "VGA_640x480",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x13f9df80,
-		.mode_horztiming	= 0x003c5859,
-		.mode_verttiming	= 0x00741201,
-		.mode_clkcontrol	= 0x00020001, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		640, 480,
-		640, 480,
-	},
-
-	[2] = { /* SVGA 800x600 H:46.1kHz V:69Hz */
-		.name = "SVGA_800x600",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x18fa5780,
-		.mode_horztiming	= 0x00dc7e77,
-		.mode_verttiming	= 0x00584805,
-		.mode_clkcontrol	= 0x00020000, /* /2=48Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		800, 800,
-		600, 600,
-	},
-
-	[3] = { /* XVGA 1024x768 H:56.2kHz V:70Hz */
-		.name = "XVGA_1024x768",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x1ffaff80,
-		.mode_horztiming	= 0x007d0e57,
-		.mode_verttiming	= 0x00740a01,
-		.mode_clkcontrol	= 0x000A0000, /* /1 */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 6, /* 72MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		1024, 1024,
-		768, 768,
-	},
-
-	[4] = { /* XVGA XVGA 1280x1024 H:68.5kHz V:65Hz */
-		.name = "XVGA_1280x1024",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x27fbff80,
-		.mode_horztiming	= 0x00cdb2c7,
-		.mode_verttiming	= 0x00600002,
-		.mode_clkcontrol	= 0x000A0000, /* /1 */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 10, /* 120MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		1280, 1280,
-		1024, 1024,
-	},
-
-	[5] = { /* Samsung 1024x768 TFT */
-		.name = "Samsung_1024x768_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x1ffaff80,
-		.mode_horztiming	= 0x018cc677,
-		.mode_verttiming	= 0x00241217,
-		.mode_clkcontrol	= 0x00000000, /* SCB 0x1 /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f, /* SCB 0x0 */
-		.mode_pwmhi		= 0x03400000, /* SCB 0x0 */
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		1024, 1024,
-		768, 768,
-	},
-
-	[6] = { /* Toshiba 640x480 TFT */
-		.name = "Toshiba_640x480_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(640) |
-			LCD_SCREEN_SY_N(480),
-		.mode_horztiming	= LCD_HORZTIMING_HPW_N(96) |
-			LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(51),
-		.mode_verttiming	= LCD_VERTTIMING_VPW_N(2) |
-			LCD_VERTTIMING_VND1_N(11) | LCD_VERTTIMING_VND2_N(32),
-		.mode_clkcontrol	= 0x00000000, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		640, 480,
-		640, 480,
-	},
-
-	[7] = { /* Sharp 320x240 TFT */
-		.name = "Sharp_320x240_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 12500,
-			.hfmax = 20000,
-			.vfmin = 38,
-			.vfmax = 81,
-			.dclkmin = 4500000,
-			.dclkmax = 6800000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(320) |
-			LCD_SCREEN_SY_N(240),
-		.mode_horztiming	= LCD_HORZTIMING_HPW_N(60) |
-			LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2),
-		.mode_verttiming	= LCD_VERTTIMING_VPW_N(2) |
-			LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5),
-		.mode_clkcontrol	= LCD_CLKCONTROL_PCD_N(7), /*16=6Mhz*/
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		320, 320,
-		240, 240,
-	},
-
-	[8] = { /* Toppoly TD070WGCB2 7" 856x480 TFT */
-		.name = "Toppoly_TD070WGCB2",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(856) |
-			LCD_SCREEN_SY_N(480),
-		.mode_horztiming	= LCD_HORZTIMING_HND2_N(43) |
-			LCD_HORZTIMING_HND1_N(43) | LCD_HORZTIMING_HPW_N(114),
-		.mode_verttiming	= LCD_VERTTIMING_VND2_N(20) |
-			LCD_VERTTIMING_VND1_N(21) | LCD_VERTTIMING_VPW_N(4),
-		.mode_clkcontrol	= 0x00020001, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		856, 856,
-		480, 480,
-	},
-};
-
-#define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
-
-/********************************************************************/
-
-#ifdef CONFIG_PM
-static int set_brightness(unsigned int brightness)
-{
-	unsigned int hi1, divider;
-
-	/* limit brightness pwm duty to >= 30/1600 */
-	if (brightness < 30) {
-		brightness = 30;
-	}
-	divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-	hi1 = (lcd->pwmhi >> 16) + 1;
-	hi1 = (((brightness & 0xFF) + 1) * divider >> 8);
-	lcd->pwmhi &= 0xFFFF;
-	lcd->pwmhi |= (hi1 << 16);
-
-	return brightness;
-}
-#endif /* CONFIG_PM */
-
-static int winbpp (unsigned int winctrl1)
-{
-	int bits = 0;
-
-	/* how many bits are needed for each pixel format */
-	switch (winctrl1 & LCD_WINCTRL1_FRM) {
-	case LCD_WINCTRL1_FRM_1BPP:
-		bits = 1;
-		break;
-	case LCD_WINCTRL1_FRM_2BPP:
-		bits = 2;
-		break;
-	case LCD_WINCTRL1_FRM_4BPP:
-		bits = 4;
-		break;
-	case LCD_WINCTRL1_FRM_8BPP:
-		bits = 8;
-		break;
-	case LCD_WINCTRL1_FRM_12BPP:
-	case LCD_WINCTRL1_FRM_16BPP655:
-	case LCD_WINCTRL1_FRM_16BPP565:
-	case LCD_WINCTRL1_FRM_16BPP556:
-	case LCD_WINCTRL1_FRM_16BPPI1555:
-	case LCD_WINCTRL1_FRM_16BPPI5551:
-	case LCD_WINCTRL1_FRM_16BPPA1555:
-	case LCD_WINCTRL1_FRM_16BPPA5551:
-		bits = 16;
-		break;
-	case LCD_WINCTRL1_FRM_24BPP:
-	case LCD_WINCTRL1_FRM_32BPP:
-		bits = 32;
-		break;
-	}
-
-	return bits;
-}
-
-static int fbinfo2index (struct fb_info *fb_info)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i) {
-		if (fb_info == (struct fb_info *)(&_au1200fb_devices[i].fb_info))
-			return i;
-	}
-	printk("au1200fb: ERROR: fbinfo2index failed!\n");
-	return -1;
-}
-
-static int au1200_setlocation (struct au1200fb_device *fbdev, int plane,
-	int xpos, int ypos)
-{
-	uint32 winctrl0, winctrl1, winenable, fb_offset = 0;
-	int xsz, ysz;
-
-	/* FIX!!! NOT CHECKING FOR COMPLETE OFFSCREEN YET */
-
-	winctrl0 = lcd->window[plane].winctrl0;
-	winctrl1 = lcd->window[plane].winctrl1;
-	winctrl0 &= (LCD_WINCTRL0_A | LCD_WINCTRL0_AEN);
-	winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
-
-	/* Check for off-screen adjustments */
-	xsz = win->w[plane].xres;
-	ysz = win->w[plane].yres;
-	if ((xpos + win->w[plane].xres) > panel->Xres) {
-		/* Off-screen to the right */
-		xsz = panel->Xres - xpos; /* off by 1 ??? */
-		/*printk("off screen right\n");*/
-	}
-
-	if ((ypos + win->w[plane].yres) > panel->Yres) {
-		/* Off-screen to the bottom */
-		ysz = panel->Yres - ypos; /* off by 1 ??? */
-		/*printk("off screen bottom\n");*/
-	}
-
-	if (xpos < 0) {
-		/* Off-screen to the left */
-		xsz = win->w[plane].xres + xpos;
-		fb_offset += (((0 - xpos) * winbpp(lcd->window[plane].winctrl1))/8);
-		xpos = 0;
-		/*printk("off screen left\n");*/
-	}
-
-	if (ypos < 0) {
-		/* Off-screen to the top */
-		ysz = win->w[plane].yres + ypos;
-		/* fixme: fb_offset += ((0-ypos)*fb_pars[plane].line_length); */
-		ypos = 0;
-		/*printk("off screen top\n");*/
-	}
-
-	/* record settings */
-	win->w[plane].xpos = xpos;
-	win->w[plane].ypos = ypos;
-
-	xsz -= 1;
-	ysz -= 1;
-	winctrl0 |= (xpos << 21);
-	winctrl0 |= (ypos << 10);
-	winctrl1 |= (xsz << 11);
-	winctrl1 |= (ysz << 0);
-
-	/* Disable the window while making changes, then restore WINEN */
-	winenable = lcd->winenable & (1 << plane);
-	au_sync();
-	lcd->winenable &= ~(1 << plane);
-	lcd->window[plane].winctrl0 = winctrl0;
-	lcd->window[plane].winctrl1 = winctrl1;
-	lcd->window[plane].winbuf0 =
-	lcd->window[plane].winbuf1 = fbdev->fb_phys;
-	lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
-	lcd->winenable |= winenable;
-	au_sync();
-
-	return 0;
-}
-
-static void au1200_setpanel (struct panel_settings *newpanel)
-{
-	/*
-	 * Perform global setup/init of LCD controller
-	 */
-	uint32 winenable;
-
-	/* Make sure all windows disabled */
-	winenable = lcd->winenable;
-	lcd->winenable = 0;
-	au_sync();
-	/*
-	 * Ensure everything is disabled before reconfiguring
-	 */
-	if (lcd->screen & LCD_SCREEN_SEN) {
-		/* Wait for vertical sync period */
-		lcd->intstatus = LCD_INT_SS;
-		while ((lcd->intstatus & LCD_INT_SS) == 0) {
-			au_sync();
-		}
-
-		lcd->screen &= ~LCD_SCREEN_SEN;	/*disable the controller*/
-
-		do {
-			lcd->intstatus = lcd->intstatus; /*clear interrupts*/
-			au_sync();
-		/*wait for controller to shut down*/
-		} while ((lcd->intstatus & LCD_INT_SD) == 0);
-
-		/* Call shutdown of current panel (if up) */
-		/* this must occur last, because if an external clock is driving
-		    the controller, the clock cannot be turned off before first
-			shutting down the controller.
-		 */
-		if (panel->device_shutdown != NULL)
-			panel->device_shutdown();
-	}
-
-	/* Newpanel == NULL indicates a shutdown operation only */
-	if (newpanel == NULL)
-		return;
-
-	panel = newpanel;
-
-	printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
-
-	/*
-	 * Setup clocking if internal LCD clock source (assumes sys_auxpll valid)
-	 */
-	if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
-	{
-		uint32 sys_clksrc;
-		au_writel(panel->mode_auxpll, SYS_AUXPLL);
-		sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f;
-		sys_clksrc |= panel->mode_toyclksrc;
-		au_writel(sys_clksrc, SYS_CLKSRC);
-	}
-
-	/*
-	 * Configure panel timings
-	 */
-	lcd->screen = panel->mode_screen;
-	lcd->horztiming = panel->mode_horztiming;
-	lcd->verttiming = panel->mode_verttiming;
-	lcd->clkcontrol = panel->mode_clkcontrol;
-	lcd->pwmdiv = panel->mode_pwmdiv;
-	lcd->pwmhi = panel->mode_pwmhi;
-	lcd->outmask = panel->mode_outmask;
-	lcd->fifoctrl = panel->mode_fifoctrl;
-	au_sync();
-
-	/* fixme: Check window settings to make sure still valid
-	 * for new geometry */
-#if 0
-	au1200_setlocation(fbdev, 0, win->w[0].xpos, win->w[0].ypos);
-	au1200_setlocation(fbdev, 1, win->w[1].xpos, win->w[1].ypos);
-	au1200_setlocation(fbdev, 2, win->w[2].xpos, win->w[2].ypos);
-	au1200_setlocation(fbdev, 3, win->w[3].xpos, win->w[3].ypos);
-#endif
-	lcd->winenable = winenable;
-
-	/*
-	 * Re-enable screen now that it is configured
-	 */
-	lcd->screen |= LCD_SCREEN_SEN;
-	au_sync();
-
-	/* Call init of panel */
-	if (panel->device_init != NULL) panel->device_init();
-
-	/* FIX!!!! not appropriate on panel change!!! Global setup/init */
-	lcd->intenable = 0;
-	lcd->intstatus = ~0;
-	lcd->backcolor = win->mode_backcolor;
-
-	/* Setup Color Key - FIX!!! */
-	lcd->colorkey = win->mode_colorkey;
-	lcd->colorkeymsk = win->mode_colorkeymsk;
-
-	/* Setup HWCursor - FIX!!! Need to support this eventually */
-	lcd->hwc.cursorctrl = 0;
-	lcd->hwc.cursorpos = 0;
-	lcd->hwc.cursorcolor0 = 0;
-	lcd->hwc.cursorcolor1 = 0;
-	lcd->hwc.cursorcolor2 = 0;
-	lcd->hwc.cursorcolor3 = 0;
-
-
-#if 0
-#define D(X) printk("%25s: %08X\n", #X, X)
-	D(lcd->screen);
-	D(lcd->horztiming);
-	D(lcd->verttiming);
-	D(lcd->clkcontrol);
-	D(lcd->pwmdiv);
-	D(lcd->pwmhi);
-	D(lcd->outmask);
-	D(lcd->fifoctrl);
-	D(lcd->window[0].winctrl0);
-	D(lcd->window[0].winctrl1);
-	D(lcd->window[0].winctrl2);
-	D(lcd->window[0].winbuf0);
-	D(lcd->window[0].winbuf1);
-	D(lcd->window[0].winbufctrl);
-	D(lcd->window[1].winctrl0);
-	D(lcd->window[1].winctrl1);
-	D(lcd->window[1].winctrl2);
-	D(lcd->window[1].winbuf0);
-	D(lcd->window[1].winbuf1);
-	D(lcd->window[1].winbufctrl);
-	D(lcd->window[2].winctrl0);
-	D(lcd->window[2].winctrl1);
-	D(lcd->window[2].winctrl2);
-	D(lcd->window[2].winbuf0);
-	D(lcd->window[2].winbuf1);
-	D(lcd->window[2].winbufctrl);
-	D(lcd->window[3].winctrl0);
-	D(lcd->window[3].winctrl1);
-	D(lcd->window[3].winctrl2);
-	D(lcd->window[3].winbuf0);
-	D(lcd->window[3].winbuf1);
-	D(lcd->window[3].winbufctrl);
-	D(lcd->winenable);
-	D(lcd->intenable);
-	D(lcd->intstatus);
-	D(lcd->backcolor);
-	D(lcd->winenable);
-	D(lcd->colorkey);
-    D(lcd->colorkeymsk);
-	D(lcd->hwc.cursorctrl);
-	D(lcd->hwc.cursorpos);
-	D(lcd->hwc.cursorcolor0);
-	D(lcd->hwc.cursorcolor1);
-	D(lcd->hwc.cursorcolor2);
-	D(lcd->hwc.cursorcolor3);
-#endif
-}
-
-static void au1200_setmode(struct au1200fb_device *fbdev)
-{
-	int plane = fbdev->plane;
-	/* Window/plane setup */
-	lcd->window[plane].winctrl1 = ( 0
-		| LCD_WINCTRL1_PRI_N(plane)
-		| win->w[plane].mode_winctrl1 /* FRM,CCO,PO,PIPE */
-		) ;
-
-	au1200_setlocation(fbdev, plane, win->w[plane].xpos, win->w[plane].ypos);
-
-	lcd->window[plane].winctrl2 = ( 0
-		| LCD_WINCTRL2_CKMODE_00
-		| LCD_WINCTRL2_DBM
-		| LCD_WINCTRL2_BX_N( fbdev->fb_info.fix.line_length)
-		| LCD_WINCTRL2_SCX_1
-		| LCD_WINCTRL2_SCY_1
-		) ;
-	lcd->winenable |= win->w[plane].mode_winenable;
-	au_sync();
-}
-
-
-/* Inline helpers */
-
-/*#define panel_is_dual(panel)  ((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
-/*#define panel_is_active(panel)((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
-
-#define panel_is_color(panel) ((panel->mode_screen & LCD_SCREEN_PT) <= LCD_SCREEN_PT_CDSTN)
-
-/* Bitfields format supported by the controller. */
-static struct fb_bitfield rgb_bitfields[][4] = {
-  	/*     Red, 	   Green, 	 Blue, 	     Transp   */
-	[LCD_WINCTRL1_FRM_16BPP655 >> 25] =
-		{ { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPP565 >> 25] =
-		{ { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPP556 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPI1555 >> 25] =
-		{ { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPI5551 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPA1555 >> 25] =
-		{ { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPA5551 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
-
-	[LCD_WINCTRL1_FRM_24BPP >> 25] =
-		{ { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_32BPP >> 25] =
-		{ { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 0, 0 } },
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* Helpers */
-
-static void au1200fb_update_fbinfo(struct fb_info *fbi)
-{
-	/* FIX!!!! This also needs to take the window pixel format into account!!! */
-
-	/* Update var-dependent FB info */
-	if (panel_is_color(panel)) {
-		if (fbi->var.bits_per_pixel <= 8) {
-			/* palettized */
-			fbi->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-			fbi->fix.line_length = fbi->var.xres_virtual /
-				(8/fbi->var.bits_per_pixel);
-		} else {
-			/* non-palettized */
-			fbi->fix.visual = FB_VISUAL_TRUECOLOR;
-			fbi->fix.line_length = fbi->var.xres_virtual * (fbi->var.bits_per_pixel / 8);
-		}
-	} else {
-		/* mono FIX!!! mono 8 and 4 bits */
-		fbi->fix.visual = FB_VISUAL_MONO10;
-		fbi->fix.line_length = fbi->var.xres_virtual / 8;
-	}
-
-	fbi->screen_size = fbi->fix.line_length * fbi->var.yres_virtual;
-	print_dbg("line length: %d\n", fbi->fix.line_length);
-	print_dbg("bits_per_pixel: %d\n", fbi->var.bits_per_pixel);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 framebuffer driver */
-
-/* fb_check_var
- * Validate var settings with hardware restrictions and modify it if necessary
- */
-static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
-	struct fb_info *fbi)
-{
-	struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
-	u32 pixclock;
-	int screen_size, plane;
-
-	plane = fbdev->plane;
-
-	/* Make sure that the mode respect all LCD controller and
-	 * panel restrictions. */
-	var->xres = win->w[plane].xres;
-	var->yres = win->w[plane].yres;
-
-	/* No need for virtual resolution support */
-	var->xres_virtual = var->xres;
-	var->yres_virtual = var->yres;
-
-	var->bits_per_pixel = winbpp(win->w[plane].mode_winctrl1);
-
-	screen_size = var->xres_virtual * var->yres_virtual;
-	if (var->bits_per_pixel > 8) screen_size *= (var->bits_per_pixel / 8);
-	else screen_size /= (8/var->bits_per_pixel);
-
-	if (fbdev->fb_len < screen_size)
-		return -EINVAL; /* Virtual screen is to big, abort */
-
-	/* FIX!!!! what are the implicaitons of ignoring this for windows ??? */
-	/* The max LCD clock is fixed to 48MHz (value of AUX_CLK). The pixel
-	 * clock can only be obtain by dividing this value by an even integer.
-	 * Fallback to a slower pixel clock if necessary. */
-	pixclock = max((u32)(PICOS2KHZ(var->pixclock) * 1000), fbi->monspecs.dclkmin);
-	pixclock = min(pixclock, min(fbi->monspecs.dclkmax, (u32)AU1200_LCD_MAX_CLK/2));
-
-	if (AU1200_LCD_MAX_CLK % pixclock) {
-		int diff = AU1200_LCD_MAX_CLK % pixclock;
-		pixclock -= diff;
-	}
-
-	var->pixclock = KHZ2PICOS(pixclock/1000);
-#if 0
-	if (!panel_is_active(panel)) {
-		int pcd = AU1200_LCD_MAX_CLK / (pixclock * 2) - 1;
-
-		if (!panel_is_color(panel)
-			&& (panel->control_base & LCD_CONTROL_MPI) && (pcd < 3)) {
-			/* STN 8bit mono panel support is up to 6MHz pixclock */
-			var->pixclock = KHZ2PICOS(6000);
-		} else if (!pcd) {
-			/* Other STN panel support is up to 12MHz  */
-			var->pixclock = KHZ2PICOS(12000);
-		}
-	}
-#endif
-	/* Set bitfield accordingly */
-	switch (var->bits_per_pixel) {
-		case 16:
-		{
-			/* 16bpp True color.
-			 * These must be set to MATCH WINCTRL[FORM] */
-			int idx;
-			idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-			var->red    = rgb_bitfields[idx][0];
-			var->green  = rgb_bitfields[idx][1];
-			var->blue   = rgb_bitfields[idx][2];
-			var->transp = rgb_bitfields[idx][3];
-			break;
-		}
-
-		case 32:
-		{
-			/* 32bpp True color.
-			 * These must be set to MATCH WINCTRL[FORM] */
-			int idx;
-			idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-			var->red    = rgb_bitfields[idx][0];
-			var->green  = rgb_bitfields[idx][1];
-			var->blue   = rgb_bitfields[idx][2];
-			var->transp = rgb_bitfields[idx][3];
-			break;
-		}
-		default:
-			print_dbg("Unsupported depth %dbpp", var->bits_per_pixel);
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* fb_set_par
- * Set hardware with var settings. This will enable the controller with a
- * specific mode, normally validated with the fb_check_var method
- */
-static int au1200fb_fb_set_par(struct fb_info *fbi)
-{
-	struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
-
-	au1200fb_update_fbinfo(fbi);
-	au1200_setmode(fbdev);
-
-	return 0;
-}
-
-/* fb_setcolreg
- * Set color in LCD palette.
- */
-static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
-	unsigned blue, unsigned transp, struct fb_info *fbi)
-{
-	volatile u32 *palette = lcd->palette;
-	u32 value;
-
-	if (regno > (AU1200_LCD_NBR_PALETTE_ENTRIES - 1))
-		return -EINVAL;
-
-	if (fbi->var.grayscale) {
-		/* Convert color to grayscale */
-		red = green = blue =
-			(19595 * red + 38470 * green + 7471 * blue) >> 16;
-	}
-
-	if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
-		/* Place color in the pseudopalette */
-		if (regno > 16)
-			return -EINVAL;
-
-		palette = (u32*) fbi->pseudo_palette;
-
-		red   >>= (16 - fbi->var.red.length);
-		green >>= (16 - fbi->var.green.length);
-		blue  >>= (16 - fbi->var.blue.length);
-
-		value = (red   << fbi->var.red.offset) 	|
-			(green << fbi->var.green.offset)|
-			(blue  << fbi->var.blue.offset);
-		value &= 0xFFFF;
-
-	} else if (1 /*FIX!!! panel_is_active(fbdev->panel)*/) {
-		/* COLOR TFT PALLETTIZED (use RGB 565) */
-		value = (red & 0xF800)|((green >> 5) &
-				0x07E0)|((blue >> 11) & 0x001F);
-		value &= 0xFFFF;
-
-	} else if (0 /*panel_is_color(fbdev->panel)*/) {
-		/* COLOR STN MODE */
-		value = 0x1234;
-		value &= 0xFFF;
-	} else {
-		/* MONOCHROME MODE */
-		value = (green >> 12) & 0x000F;
-		value &= 0xF;
-	}
-
-	palette[regno] = value;
-
-	return 0;
-}
-
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
-	/* Short-circuit screen blanking */
-	if (noblanking)
-		return 0;
-
-	switch (blank_mode) {
-
-	case FB_BLANK_UNBLANK:
-	case FB_BLANK_NORMAL:
-		/* printk("turn on panel\n"); */
-		au1200_setpanel(panel);
-		break;
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		/* printk("turn off panel\n"); */
-		au1200_setpanel(NULL);
-		break;
-	default:
-		break;
-
-	}
-
-	/* FB_BLANK_NORMAL is a soft blank */
-	return (blank_mode == FB_BLANK_NORMAL) ? -EINVAL : 0;
-}
-
-/* fb_mmap
- * Map video memory in user space. We don't use the generic fb_mmap
- * method mainly to allow the use of the TLB streaming flag (CCA=6)
- */
-static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-
-{
-	unsigned int len;
-	unsigned long start=0, off;
-	struct au1200fb_device *fbdev = (struct au1200fb_device *) info;
-
-#ifdef CONFIG_PM
-	au1xxx_pm_access(LCD_pm_dev);
-#endif
-
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
-		return -EINVAL;
-	}
-
-	start = fbdev->fb_phys & PAGE_MASK;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
-
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	if ((vma->vm_end - vma->vm_start + off) > len) {
-		return -EINVAL;
-	}
-
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */
-
-	vma->vm_flags |= VM_IO;
-
-	return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				  vma->vm_end - vma->vm_start,
-				  vma->vm_page_prot);
-
-	return 0;
-}
-
-static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
-{
-
-	unsigned int hi1, divider;
-
-	/* SCREEN_SIZE: user cannot reset size, must switch panel choice */
-
-	if (pdata->flags & SCREEN_BACKCOLOR)
-		lcd->backcolor = pdata->backcolor;
-
-	if (pdata->flags & SCREEN_BRIGHTNESS) {
-
-		// limit brightness pwm duty to >= 30/1600
-		if (pdata->brightness < 30) {
-			pdata->brightness = 30;
-		}
-		divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-		hi1 = (lcd->pwmhi >> 16) + 1;
-		hi1 = (((pdata->brightness & 0xFF)+1) * divider >> 8);
-		lcd->pwmhi &= 0xFFFF;
-		lcd->pwmhi |= (hi1 << 16);
-	}
-
-	if (pdata->flags & SCREEN_COLORKEY)
-		lcd->colorkey = pdata->colorkey;
-
-	if (pdata->flags & SCREEN_MASK)
-		lcd->colorkeymsk = pdata->mask;
-	au_sync();
-}
-
-static void get_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
-{
-	unsigned int hi1, divider;
-
-	pdata->xsize = ((lcd->screen & LCD_SCREEN_SX) >> 19) + 1;
-	pdata->ysize = ((lcd->screen & LCD_SCREEN_SY) >> 8) + 1;
-
-	pdata->backcolor = lcd->backcolor;
-	pdata->colorkey = lcd->colorkey;
-	pdata->mask = lcd->colorkeymsk;
-
-	// brightness
-	hi1 = (lcd->pwmhi >> 16) + 1;
-	divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-	pdata->brightness = ((hi1 << 8) / divider) - 1;
-	au_sync();
-}
-
-static void set_window(unsigned int plane,
-	struct au1200_lcd_window_regs_t *pdata)
-{
-	unsigned int val, bpp;
-
-	/* Window control register 0 */
-	if (pdata->flags & WIN_POSITION) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_OX |
-				LCD_WINCTRL0_OY);
-		val |= ((pdata->xpos << 21) & LCD_WINCTRL0_OX);
-		val |= ((pdata->ypos << 10) & LCD_WINCTRL0_OY);
-		lcd->window[plane].winctrl0 = val;
-	}
-	if (pdata->flags & WIN_ALPHA_COLOR) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_A);
-		val |= ((pdata->alpha_color << 2) & LCD_WINCTRL0_A);
-		lcd->window[plane].winctrl0 = val;
-	}
-	if (pdata->flags & WIN_ALPHA_MODE) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_AEN);
-		val |= ((pdata->alpha_mode << 1) & LCD_WINCTRL0_AEN);
-		lcd->window[plane].winctrl0 = val;
-	}
-
-	/* Window control register 1 */
-	if (pdata->flags & WIN_PRIORITY) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PRI);
-		val |= ((pdata->priority << 30) & LCD_WINCTRL1_PRI);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_CHANNEL) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PIPE);
-		val |= ((pdata->channel << 29) & LCD_WINCTRL1_PIPE);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_BUFFER_FORMAT) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_FRM);
-		val |= ((pdata->buffer_format << 25) & LCD_WINCTRL1_FRM);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_COLOR_ORDER) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_CCO);
-		val |= ((pdata->color_order << 24) & LCD_WINCTRL1_CCO);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_PIXEL_ORDER) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PO);
-		val |= ((pdata->pixel_order << 22) & LCD_WINCTRL1_PO);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_SIZE) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_SZX |
-				LCD_WINCTRL1_SZY);
-		val |= (((pdata->xsize << 11) - 1) & LCD_WINCTRL1_SZX);
-		val |= (((pdata->ysize) - 1) & LCD_WINCTRL1_SZY);
-		lcd->window[plane].winctrl1 = val;
-		/* program buffer line width */
-		bpp = winbpp(val) / 8;
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_BX);
-		val |= (((pdata->xsize * bpp) << 8) & LCD_WINCTRL2_BX);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	/* Window control register 2 */
-	if (pdata->flags & WIN_COLORKEY_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_CKMODE);
-		val |= ((pdata->colorkey_mode << 24) & LCD_WINCTRL2_CKMODE);
-		lcd->window[plane].winctrl2 = val;
-	}
-	if (pdata->flags & WIN_DOUBLE_BUFFER_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_DBM);
-		val |= ((pdata->double_buffer_mode << 23) & LCD_WINCTRL2_DBM);
-		lcd->window[plane].winctrl2 = val;
-	}
-	if (pdata->flags & WIN_RAM_ARRAY_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_RAM);
-		val |= ((pdata->ram_array_mode << 21) & LCD_WINCTRL2_RAM);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	/* Buffer line width programmed with WIN_SIZE */
-
-	if (pdata->flags & WIN_BUFFER_SCALE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_SCX |
-				LCD_WINCTRL2_SCY);
-		val |= ((pdata->xsize << 11) & LCD_WINCTRL2_SCX);
-		val |= ((pdata->ysize) & LCD_WINCTRL2_SCY);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	if (pdata->flags & WIN_ENABLE) {
-		val = lcd->winenable;
-		val &= ~(1<<plane);
-		val |= (pdata->enable & 1) << plane;
-		lcd->winenable = val;
-	}
-	au_sync();
-}
-
-static void get_window(unsigned int plane,
-	struct au1200_lcd_window_regs_t *pdata)
-{
-	/* Window control register 0 */
-	pdata->xpos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OX) >> 21;
-	pdata->ypos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OY) >> 10;
-	pdata->alpha_color = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_A) >> 2;
-	pdata->alpha_mode = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_AEN) >> 1;
-
-	/* Window control register 1 */
-	pdata->priority = (lcd->window[plane].winctrl1& LCD_WINCTRL1_PRI) >> 30;
-	pdata->channel = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PIPE) >> 29;
-	pdata->buffer_format = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-	pdata->color_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_CCO) >> 24;
-	pdata->pixel_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PO) >> 22;
-	pdata->xsize = ((lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZX) >> 11) + 1;
-	pdata->ysize = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZY) + 1;
-
-	/* Window control register 2 */
-	pdata->colorkey_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_CKMODE) >> 24;
-	pdata->double_buffer_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_DBM) >> 23;
-	pdata->ram_array_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_RAM) >> 21;
-
-	pdata->enable = (lcd->winenable >> plane) & 1;
-	au_sync();
-}
-
-static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
-                          unsigned long arg)
-{
-	int plane;
-	int val;
-
-#ifdef CONFIG_PM
-	au1xxx_pm_access(LCD_pm_dev);
-#endif
-
-	plane = fbinfo2index(info);
-	print_dbg("au1200fb: ioctl %d on plane %d\n", cmd, plane);
-
-	if (cmd == AU1200_LCD_FB_IOCTL) {
-		struct au1200_lcd_iodata_t iodata;
-
-		if (copy_from_user(&iodata, (void __user *) arg, sizeof(iodata)))
-			return -EFAULT;
-
-		print_dbg("FB IOCTL called\n");
-
-		switch (iodata.subcmd) {
-		case AU1200_LCD_SET_SCREEN:
-			print_dbg("AU1200_LCD_SET_SCREEN\n");
-			set_global(cmd, &iodata.global);
-			break;
-
-		case AU1200_LCD_GET_SCREEN:
-			print_dbg("AU1200_LCD_GET_SCREEN\n");
-			get_global(cmd, &iodata.global);
-			break;
-
-		case AU1200_LCD_SET_WINDOW:
-			print_dbg("AU1200_LCD_SET_WINDOW\n");
-			set_window(plane, &iodata.window);
-			break;
-
-		case AU1200_LCD_GET_WINDOW:
-			print_dbg("AU1200_LCD_GET_WINDOW\n");
-			get_window(plane, &iodata.window);
-			break;
-
-		case AU1200_LCD_SET_PANEL:
-			print_dbg("AU1200_LCD_SET_PANEL\n");
-			if ((iodata.global.panel_choice >= 0) &&
-					(iodata.global.panel_choice <
-					 NUM_PANELS))
-			{
-				struct panel_settings *newpanel;
-				panel_index = iodata.global.panel_choice;
-				newpanel = &known_lcd_panels[panel_index];
-				au1200_setpanel(newpanel);
-			}
-			break;
-
-		case AU1200_LCD_GET_PANEL:
-			print_dbg("AU1200_LCD_GET_PANEL\n");
-			iodata.global.panel_choice = panel_index;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-		val = copy_to_user((void __user *) arg, &iodata, sizeof(iodata));
-		if (val) {
-			print_dbg("error: could not copy %d bytes\n", val);
-			return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-
-
-static struct fb_ops au1200fb_fb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_check_var	= au1200fb_fb_check_var,
-	.fb_set_par	= au1200fb_fb_set_par,
-	.fb_setcolreg	= au1200fb_fb_setcolreg,
-	.fb_blank	= au1200fb_fb_blank,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-	.fb_sync	= NULL,
-	.fb_ioctl	= au1200fb_ioctl,
-	.fb_mmap	= au1200fb_fb_mmap,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static irqreturn_t au1200fb_handle_irq(int irq, void* dev_id, struct pt_regs *regs)
-{
-	/* Nothing to do for now, just clear any pending interrupt */
-	lcd->intstatus = lcd->intstatus;
-	au_sync();
-
-	return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 LCD device probe helpers */
-
-static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
-{
-	struct fb_info *fbi = &fbdev->fb_info;
-	int bpp;
-
-	memset(fbi, 0, sizeof(struct fb_info));
-	fbi->fbops = &au1200fb_fb_ops;
-
-	bpp = winbpp(win->w[fbdev->plane].mode_winctrl1);
-
-	/* Copy monitor specs from panel data */
-	/* fixme: we're setting up LCD controller windows, so these dont give a
-	damn as to what the monitor specs are (the panel itself does, but that
-	isnt done here...so maybe need a generic catchall monitor setting??? */
-	memcpy(&fbi->monspecs, &panel->monspecs, sizeof(struct fb_monspecs));
-
-	/* We first try the user mode passed in argument. If that failed,
-	 * or if no one has been specified, we default to the first mode of the
-	 * panel list. Note that after this call, var data will be set */
-	if (!fb_find_mode(&fbi->var,
-			  fbi,
-			  NULL, /* drv_info.opt_mode, */
-			  fbi->monspecs.modedb,
-			  fbi->monspecs.modedb_len,
-			  fbi->monspecs.modedb,
-			  bpp)) {
-
-		print_err("Cannot find valid mode for panel %s", panel->name);
-		return -EFAULT;
-	}
-
-	fbi->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
-	if (!fbi->pseudo_palette) {
-		return -ENOMEM;
-	}
-	memset(fbi->pseudo_palette, 0, sizeof(u32) * 16);
-
-	if (fb_alloc_cmap(&fbi->cmap, AU1200_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
-		print_err("Fail to allocate colormap (%d entries)",
-			   AU1200_LCD_NBR_PALETTE_ENTRIES);
-		kfree(fbi->pseudo_palette);
-		return -EFAULT;
-	}
-
-	strncpy(fbi->fix.id, "AU1200", sizeof(fbi->fix.id));
-	fbi->fix.smem_start = fbdev->fb_phys;
-	fbi->fix.smem_len = fbdev->fb_len;
-	fbi->fix.type = FB_TYPE_PACKED_PIXELS;
-	fbi->fix.xpanstep = 0;
-	fbi->fix.ypanstep = 0;
-	fbi->fix.mmio_start = 0;
-	fbi->fix.mmio_len = 0;
-	fbi->fix.accel = FB_ACCEL_NONE;
-
-	fbi->screen_base = (char __iomem *) fbdev->fb_mem;
-
-	au1200fb_update_fbinfo(fbi);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 LCD controller device driver */
-
-static int au1200fb_drv_probe(struct device *dev)
-{
-	struct au1200fb_device *fbdev;
-	unsigned long page;
-	int bpp, plane, ret;
-
-	if (!dev)
-		return -EINVAL;
-
-	for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
-		bpp = winbpp(win->w[plane].mode_winctrl1);
-		if (win->w[plane].xres == 0)
-			win->w[plane].xres = panel->Xres;
-		if (win->w[plane].yres == 0)
-			win->w[plane].yres = panel->Yres;
-
-		fbdev = &_au1200fb_devices[plane];
-		memset(fbdev, 0, sizeof(struct au1200fb_device));
-		fbdev->plane = plane;
-
-		/* Allocate the framebuffer to the maximum screen size */
-		fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
-
-		fbdev->fb_mem = dma_alloc_noncoherent(dev,
-				PAGE_ALIGN(fbdev->fb_len),
-				&fbdev->fb_phys, GFP_KERNEL);
-		if (!fbdev->fb_mem) {
-			print_err("fail to allocate frambuffer (size: %dK))",
-				  fbdev->fb_len / 1024);
-			return -ENOMEM;
-		}
-
-		/*
-		 * Set page reserved so that mmap will work. This is necessary
-		 * since we'll be remapping normal memory.
-		 */
-		for (page = (unsigned long)fbdev->fb_phys;
-		     page < PAGE_ALIGN((unsigned long)fbdev->fb_phys +
-			     fbdev->fb_len);
-		     page += PAGE_SIZE) {
-			SetPageReserved(pfn_to_page(page >> PAGE_SHIFT)); /* LCD DMA is NOT coherent on Au1200 */
-		}
-		print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
-		print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
-
-		/* Init FB data */
-		if ((ret = au1200fb_init_fbinfo(fbdev)) < 0)
-			goto failed;
-
-		/* Register new framebuffer */
-		if ((ret = register_framebuffer(&fbdev->fb_info)) < 0) {
-			print_err("cannot register new framebuffer");
-			goto failed;
-		}
-
-		au1200fb_fb_set_par(&fbdev->fb_info);
-
-#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
-		if (plane == 0)
-			if (fb_prepare_logo(&fbdev->fb_info, FB_ROTATE_UR)) {
-				/* Start display and show logo on boot */
-				fb_set_cmap(&fbdev->fb_info.cmap,
-						&fbdev->fb_info);
-
-				fb_show_logo(&fbdev->fb_info, FB_ROTATE_UR);
-			}
-#endif
-	}
-
-	/* Now hook interrupt too */
-	if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
-		 	  SA_INTERRUPT | SA_SHIRQ, "lcd", (void *)dev)) < 0) {
-		print_err("fail to request interrupt line %d (err: %d)",
-			  AU1200_LCD_INT, ret);
-		goto failed;
-	}
-
-	return 0;
-
-failed:
-	/* NOTE: This only does the current plane/window that failed; others are still active */
-	if (fbdev->fb_mem)
-		dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
-				fbdev->fb_mem, fbdev->fb_phys);
-	if (fbdev->fb_info.cmap.len != 0)
-		fb_dealloc_cmap(&fbdev->fb_info.cmap);
-	if (fbdev->fb_info.pseudo_palette)
-		kfree(fbdev->fb_info.pseudo_palette);
-	if (plane == 0)
-		free_irq(AU1200_LCD_INT, (void*)dev);
-	return ret;
-}
-
-static int au1200fb_drv_remove(struct device *dev)
-{
-	struct au1200fb_device *fbdev;
-	int plane;
-
-	if (!dev)
-		return -ENODEV;
-
-	/* Turn off the panel */
-	au1200_setpanel(NULL);
-
-	for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
-	{
-		fbdev = &_au1200fb_devices[plane];
-
-		/* Clean up all probe data */
-		unregister_framebuffer(&fbdev->fb_info);
-		if (fbdev->fb_mem)
-			dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
-					fbdev->fb_mem, fbdev->fb_phys);
-		if (fbdev->fb_info.cmap.len != 0)
-			fb_dealloc_cmap(&fbdev->fb_info.cmap);
-		if (fbdev->fb_info.pseudo_palette)
-			kfree(fbdev->fb_info.pseudo_palette);
-	}
-
-	free_irq(AU1200_LCD_INT, (void *)dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int au1200fb_drv_suspend(struct device *dev, u32 state, u32 level)
-{
-	/* TODO */
-	return 0;
-}
-
-static int au1200fb_drv_resume(struct device *dev, u32 level)
-{
-	/* TODO */
-	return 0;
-}
-#endif /* CONFIG_PM */
-
-static struct device_driver au1200fb_driver = {
-	.name		= "au1200-lcd",
-	.bus		= &platform_bus_type,
-	.probe		= au1200fb_drv_probe,
-	.remove		= au1200fb_drv_remove,
-#ifdef CONFIG_PM
-	.suspend	= au1200fb_drv_suspend,
-	.resume		= au1200fb_drv_resume,
-#endif
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* Kernel driver */
-
-static void au1200fb_setup(void)
-{
-	char* options = NULL;
-	char* this_opt;
-	int num_panels = ARRAY_SIZE(known_lcd_panels);
-	int panel_idx = -1;
-
-	fb_get_options(DRIVER_NAME, &options);
-
-	if (options) {
-		while ((this_opt = strsep(&options,",")) != NULL) {
-			/* Panel option - can be panel name,
-			 * "bs" for board-switch, or number/index */
-			if (!strncmp(this_opt, "panel:", 6)) {
-				int i;
-				long int li;
-				char *endptr;
-				this_opt += 6;
-				/* First check for index, which allows
-				 * to short circuit this mess */
-				li = simple_strtol(this_opt, &endptr, 0);
-				if (*endptr == '\0') {
-					panel_idx = (int)li;
-				}
-				else if (strcmp(this_opt, "bs") == 0) {
-					extern int board_au1200fb_panel(void);
-					panel_idx = board_au1200fb_panel();
-				}
-
-				else
-				for (i = 0; i < num_panels; i++) {
-					if (!strcmp(this_opt, known_lcd_panels[i].name)) {
-						panel_idx = i;
-						break;
-					}
-				}
-
-				if ((panel_idx < 0) || (panel_idx >= num_panels)) {
-						print_warn("Panel %s not supported!", this_opt);
-				}
-				else
-					panel_index = panel_idx;
-			}
-
-			else if (strncmp(this_opt, "nohwcursor", 10) == 0) {
-				nohwcursor = 1;
-			}
-
-			/* Unsupported option */
-			else {
-				print_warn("Unsupported option \"%s\"", this_opt);
-			}
-		}
-	}
-}
-
-#ifdef CONFIG_PM
-static int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
-		au1xxx_request_t request, void *data) {
-	int retval = -1;
-	unsigned int d = 0;
-	unsigned int brightness = 0;
-
-	if (request == AU1XXX_PM_SLEEP) {
-		board_au1200fb_panel_shutdown();
-	}
-	else if (request == AU1XXX_PM_WAKEUP) {
-		if(dev->prev_state == SLEEP_STATE)
-		{
-			int plane;
-			au1200_setpanel(panel);
-			for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) 	{
-				struct au1200fb_device *fbdev;
-				fbdev = &_au1200fb_devices[plane];
-				au1200fb_fb_set_par(&fbdev->fb_info);
-			}
-		}
-
-		d = *((unsigned int*)data);
-		if(d <=10) brightness = 26;
-		else if(d<=20) brightness = 51;
-		else if(d<=30) brightness = 77;
-		else if(d<=40) brightness = 102;
-		else if(d<=50) brightness = 128;
-		else if(d<=60) brightness = 153;
-		else if(d<=70) brightness = 179;
-		else if(d<=80) brightness = 204;
-		else if(d<=90) brightness = 230;
-		else brightness = 255;
-		set_brightness(brightness);
-	} else if (request == AU1XXX_PM_GETSTATUS) {
-		return dev->cur_state;
-	} else if (request == AU1XXX_PM_ACCESS) {
-		if (dev->cur_state != SLEEP_STATE)
-			return retval;
-		else {
-			au1200_setpanel(panel);
-		}
-	} else if (request == AU1XXX_PM_IDLE) {
-	} else if (request == AU1XXX_PM_CLEANUP) {
-	}
-
-	return retval;
-}
-#endif
-
-static int __init au1200fb_init(void)
-{
-	print_info("" DRIVER_DESC "");
-
-	/* Setup driver with options */
-	au1200fb_setup();
-
-	/* Point to the panel selected */
-	panel = &known_lcd_panels[panel_index];
-	win = &windows[window_index];
-
-	printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
-	printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
-
-	/* Kickstart the panel, the framebuffers/windows come soon enough */
-	au1200_setpanel(panel);
-
-	#ifdef CONFIG_PM
-	LCD_pm_dev = new_au1xxx_power_device("LCD", &au1200fb_pm_callback, NULL);
-	if ( LCD_pm_dev == NULL)
-		printk(KERN_INFO "Unable to create a power management device entry for the au1200fb.\n");
-	else
-		printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n");
-	#endif
-
-	return driver_register(&au1200fb_driver);
-}
-
-static void __exit au1200fb_cleanup(void)
-{
-	driver_unregister(&au1200fb_driver);
-}
-
-module_init(au1200fb_init);
-module_exit(au1200fb_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 334b1db1bd7..27597c576ef 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -29,12 +29,15 @@ static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
 
 static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&bd->sem);
@@ -65,12 +68,15 @@ static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf)
 
 static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, brightness;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int brightness = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	brightness = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&bd->sem);
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 86908a60c63..bc8ab005a3f 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -31,12 +31,15 @@ static ssize_t lcd_show_power(struct class_device *cdev, char *buf)
 
 static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&ld->sem);
@@ -44,8 +47,7 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_
 		pr_debug("lcd: set power to %d\n", power);
 		ld->props->set_power(ld, power);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);
 
 	return rc;
@@ -53,14 +55,12 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_
 
 static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);
 
 	down(&ld->sem);
 	if (likely(ld->props && ld->props->get_contrast))
 		rc = sprintf(buf, "%d\n", ld->props->get_contrast(ld));
-	else
-		rc = -ENXIO;
 	up(&ld->sem);
 
 	return rc;
@@ -68,12 +68,15 @@ static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
 
 static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, contrast;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int contrast = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	contrast = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&ld->sem);
@@ -81,8 +84,7 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si
 		pr_debug("lcd: set contrast to %d\n", contrast);
 		ld->props->set_contrast(ld, contrast);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);
 
 	return rc;
@@ -90,14 +92,12 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si
 
 static ssize_t lcd_show_max_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);
 
 	down(&ld->sem);
 	if (likely(ld->props))
 		rc = sprintf(buf, "%d\n", ld->props->max_contrast);
-	else
-		rc = -ENXIO;
 	up(&ld->sem);
 
 	return rc;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index ca020719d20..47ba1a79adc 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1745,7 +1745,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 					fbcon_redraw_move(vc, p, 0, t, count);
 				ypan_up_redraw(vc, t, count);
 				if (vc->vc_rows - b > 0)
-					fbcon_redraw_move(vc, p, b - count,
+					fbcon_redraw_move(vc, p, b,
 							  vc->vc_rows - b, b);
 			} else
 				fbcon_redraw_move(vc, p, t + count, b - t - count, t);
@@ -2631,7 +2631,7 @@ static int fbcon_scrolldelta(struct vc_data *vc, int lines)
 					scr_memcpyw((u16 *) q, (u16 *) p,
 						    vc->vc_size_row);
 				}
-				softback_in = p;
+				softback_in = softback_curr = p;
 				update_region(vc, vc->vc_origin,
 					      logo_lines * vc->vc_cols);
 			}
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 8d8eadb6485..372aa177682 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -674,13 +674,19 @@ fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 		total_size = info->fix.smem_len;
 
 	if (p > total_size)
-		return 0;
+		return -EFBIG;
 
-	if (count >= total_size)
+	if (count > total_size) {
+		err = -EFBIG;
 		count = total_size;
+	}
+
+	if (count + p > total_size) {
+		if (!err)
+			err = -ENOSPC;
 
-	if (count + p > total_size)
 		count = total_size - p;
+	}
 
 	buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count,
 			 GFP_KERNEL);
@@ -722,7 +728,7 @@ fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 	kfree(buffer);
 
-	return (err) ? err : cnt;
+	return (cnt) ? cnt : err;
 }
 
 #ifdef CONFIG_KMOD
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index b72b05250a9..34e07399756 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -305,94 +305,6 @@ static ssize_t show_stride(struct class_device *class_device, char *buf)
 	return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length);
 }
 
-/* Format for cmap is "%02x%c%4x%4x%4x\n" */
-/* %02x entry %c transp %4x red %4x blue %4x green \n */
-/* 256 rows at 16 chars equals 4096, the normal page size */
-/* the code will automatically adjust for different page sizes */
-static ssize_t store_cmap(struct class_device *class_device, const char *buf,
-			  size_t count)
-{
-	struct fb_info *fb_info = class_get_devdata(class_device);
-	int rc, i, start, length, transp = 0;
-
-	if ((count > PAGE_SIZE) || ((count % 16) != 0))
-		return -EINVAL;
-
-	if (!fb_info->fbops->fb_setcolreg && !fb_info->fbops->fb_setcmap)
-		return -EINVAL;
-
-	sscanf(buf, "%02x", &start);
-	length = count / 16;
-
-	for (i = 0; i < length; i++)
-		if (buf[i * 16 + 2] != ' ')
-			transp = 1;
-
-	/* If we can batch, do it */
-	if (fb_info->fbops->fb_setcmap && length > 1) {
-		struct fb_cmap umap;
-
-		memset(&umap, 0, sizeof(umap));
-		if ((rc = fb_alloc_cmap(&umap, length, transp)))
-			return rc;
-
-		umap.start = start;
-		for (i = 0; i < length; i++) {
-			sscanf(&buf[i * 16 +  3], "%4hx", &umap.red[i]);
-			sscanf(&buf[i * 16 +  7], "%4hx", &umap.blue[i]);
-			sscanf(&buf[i * 16 + 11], "%4hx", &umap.green[i]);
-			if (transp)
-				umap.transp[i] = (buf[i * 16 +  2] != ' ');
-		}
-		rc = fb_info->fbops->fb_setcmap(&umap, fb_info);
-		fb_copy_cmap(&umap, &fb_info->cmap);
-		fb_dealloc_cmap(&umap);
-
-		return rc ?: count;
-	}
-	for (i = 0; i < length; i++) {
-		u16 red, blue, green, tsp;
-
-		sscanf(&buf[i * 16 +  3], "%4hx", &red);
-		sscanf(&buf[i * 16 +  7], "%4hx", &blue);
-		sscanf(&buf[i * 16 + 11], "%4hx", &green);
-		tsp = (buf[i * 16 +  2] != ' ');
-		if ((rc = fb_info->fbops->fb_setcolreg(start++,
-				      red, green, blue, tsp, fb_info)))
-			return rc;
-
-		fb_info->cmap.red[i] = red;
-		fb_info->cmap.blue[i] = blue;
-		fb_info->cmap.green[i] = green;
-		if (transp)
-			fb_info->cmap.transp[i] = tsp;
-	}
-	return count;
-}
-
-static ssize_t show_cmap(struct class_device *class_device, char *buf)
-{
-	struct fb_info *fb_info = class_get_devdata(class_device);
-	unsigned int i;
-
-	if (!fb_info->cmap.red || !fb_info->cmap.blue ||
-	   !fb_info->cmap.green)
-		return -EINVAL;
-
-	if (fb_info->cmap.len > PAGE_SIZE / 16)
-		return -EINVAL;
-
-	/* don't mess with the format, the buffer is PAGE_SIZE */
-	/* 256 entries at 16 chars per line equals 4096 = PAGE_SIZE */
-	for (i = 0; i < fb_info->cmap.len; i++) {
-		snprintf(&buf[ i * 16], PAGE_SIZE - i * 16, "%02x%c%4x%4x%4x\n", i + fb_info->cmap.start,
-			((fb_info->cmap.transp && fb_info->cmap.transp[i]) ? '*' : ' '),
-			fb_info->cmap.red[i], fb_info->cmap.blue[i],
-			fb_info->cmap.green[i]);
-	}
-	return 16 * fb_info->cmap.len;
-}
-
 static ssize_t store_blank(struct class_device *class_device, const char * buf,
 			   size_t count)
 {
@@ -502,10 +414,12 @@ static ssize_t show_fbstate(struct class_device *class_device, char *buf)
 	return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->state);
 }
 
+/* When cmap is added back in it should be a binary attribute
+ * not a text one. Consideration should also be given to converting
+ * fbdev to use configfs instead of sysfs */
 static struct class_device_attribute class_device_attrs[] = {
 	__ATTR(bits_per_pixel, S_IRUGO|S_IWUSR, show_bpp, store_bpp),
 	__ATTR(blank, S_IRUGO|S_IWUSR, show_blank, store_blank),
-	__ATTR(color_map, S_IRUGO|S_IWUSR, show_cmap, store_cmap),
 	__ATTR(console, S_IRUGO|S_IWUSR, show_console, store_console),
 	__ATTR(cursor, S_IRUGO|S_IWUSR, show_cursor, store_cursor),
 	__ATTR(mode, S_IRUGO|S_IWUSR, show_mode, store_mode),
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 788297e9d59..44aa2ffff97 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -76,8 +76,8 @@
  *
  * Experiment with v_offset to find out which works best for you.
  */
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset          __initdata = 0;
+static u32 v_offset_default __devinitdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset          __devinitdata;
 
 static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
 static int  __devinit i810fb_init_pci (struct pci_dev *dev,
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index 4ef5cd19609..b985dfad6c6 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -34,7 +34,7 @@ extra-y += $(call logo-cfiles,_clut224,ppm)
 extra-y += $(call logo-cfiles,_gray256,pgm)
 
 # Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
-quiet_cmd_logo = LOGO	$@
+quiet_cmd_logo = LOGO    $@
 	cmd_logo = scripts/pnmtologo \
 			-t $(patsubst $*_%,%,$(notdir $(basename $<))) \
 			-n $(notdir $(basename $<)) -o $@ $<
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c
index 8073a73f6f3..440272ad10e 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/matrox/g450_pll.c
@@ -316,14 +316,24 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 		case M_PIXEL_PLL_B:
 		case M_PIXEL_PLL_C:
 			{
-				u_int8_t tmp;
+				u_int8_t tmp, xpwrctrl;
 				unsigned long flags;
 				
 				matroxfb_DAC_lock_irqsave(flags);
+
+				xpwrctrl = matroxfb_DAC_in(PMINFO M1064_XPWRCTRL);
+				matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl & ~M1064_XPWRCTRL_PANELPDN);
+				mga_outb(M_SEQ_INDEX, M_SEQ1);
+				mga_outb(M_SEQ_DATA, mga_inb(M_SEQ_DATA) | M_SEQ1_SCROFF);
 				tmp = matroxfb_DAC_in(PMINFO M1064_XPIXCLKCTRL);
+				tmp |= M1064_XPIXCLKCTRL_DIS;
 				if (!(tmp & M1064_XPIXCLKCTRL_PLL_UP)) {
-					matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp | M1064_XPIXCLKCTRL_PLL_UP);
+					tmp |= M1064_XPIXCLKCTRL_PLL_UP;
 				}
+				matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
+				matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
+				matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
+
 				matroxfb_DAC_unlock_irqrestore(flags);
 			}
 			{
@@ -418,6 +428,15 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 				   frequency to higher - with <= lowest wins, while
 				   with < highest one wins */
 				if (delta <= deltaarray[idx-1]) {
+					/* all else being equal except VCO,
+					 * choose VCO not near (within 1/16th or so) VCOmin
+					 * (freqs near VCOmin aren't as stable)
+					 */
+					if (delta == deltaarray[idx-1]
+					    && vco != g450_mnp2vco(PMINFO mnparray[idx-1])
+					    && vco < (pi->vcomin * 17 / 16)) {
+						break;
+					}
 					mnparray[idx] = mnparray[idx-1];
 					deltaarray[idx] = deltaarray[idx-1];
 				} else {
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index 2e7238aa243..56513a5d220 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -40,6 +40,7 @@ void DAC1064_global_restore(WPMINFO2);
 #define M1064_XCURCOL1RED	0x0C
 #define M1064_XCURCOL1GREEN	0x0D
 #define M1064_XCURCOL1BLUE	0x0E
+#define M1064_XDVICLKCTRL	0x0F
 #define M1064_XCURCOL2RED	0x10
 #define M1064_XCURCOL2GREEN	0x11
 #define M1064_XCURCOL2BLUE	0x12
@@ -144,6 +145,7 @@ void DAC1064_global_restore(WPMINFO2);
 #define M1064_XVIDPLLN		0x8F
 
 #define M1064_XPWRCTRL		0xA0
+#define     M1064_XPWRCTRL_PANELPDN	0x04
 
 #define M1064_XPANMODE		0xA2
 
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index 3a3e1804c56..b71737178d0 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -672,6 +672,8 @@ void matroxfb_unregister_driver(struct matroxfb_driver* drv);
 
 #define M_SEQ_INDEX	0x1FC4
 #define M_SEQ_DATA	0x1FC5
+#define     M_SEQ1		0x01
+#define        M_SEQ1_SCROFF		0x20
 
 #define M_MISC_REG_READ	0x1FCC
 
diff --git a/drivers/video/maxinefb.c b/drivers/video/maxinefb.c
index 743e7ad26ac..f85421bf7cb 100644
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/maxinefb.c
@@ -55,7 +55,7 @@ static struct fb_var_screeninfo maxinefb_defined = {
 };
 
 static struct fb_fix_screeninfo maxinefb_fix = {
-	.id =		"Maxine onboard graphics 1024x768x8",
+	.id =		"Maxine",
 	.smem_len =	(1024*768),
 	.type =		FB_TYPE_PACKED_PIXELS,
 	.visual =	FB_VISUAL_PSEUDOCOLOR,
@@ -107,8 +107,6 @@ static int maxinefb_setcolreg(unsigned regno, unsigned red, unsigned green,
 
 static struct fb_ops maxinefb_ops = {
 	.owner		= THIS_MODULE,
-	.fb_get_fix	= gen_get_fix,
-	.fb_get_var	= gen_get_var,
 	.fb_setcolreg	= maxinefb_setcolreg,
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 5fe197943de..4e963930b50 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -73,8 +73,8 @@ static char *mode __devinitdata = NULL;
  * these flags allow the user to specify that requests for +ve sync
  * should be silently turned in -ve sync.
  */
-static int lowhsync __devinitdata = 0;
-static int lowvsync __devinitdata = 0;
+static int lowhsync;
+static int lowvsync;
 
 /*
  * The hardware state of the graphics card that isn't part of the
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 10e6b3aab9e..0da624e6524 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -73,7 +73,7 @@
 /* --------------------------------------------------------------------- */
 
 
-static char *mode_option __initdata = NULL;
+static char *mode_option __devinitdata = NULL;
 
 #ifdef MODULE
 
@@ -1545,7 +1545,7 @@ static int __devinit savage_map_mmio (struct fb_info *info)
 	return 0;
 }
 
-static void __devinit savage_unmap_mmio (struct fb_info *info)
+static void savage_unmap_mmio (struct fb_info *info)
 {
 	struct savagefb_par *par = info->par;
 	DBG ("savage_unmap_mmio");
@@ -1597,7 +1597,7 @@ static int __devinit savage_map_video (struct fb_info *info,
 	return 0;
 }
 
-static void __devinit savage_unmap_video (struct fb_info *info)
+static void savage_unmap_video (struct fb_info *info)
 {
 	struct savagefb_par *par = info->par;
 
@@ -1614,7 +1614,7 @@ static void __devinit savage_unmap_video (struct fb_info *info)
 	}
 }
 
-static int __devinit savage_init_hw (struct savagefb_par *par)
+static int savage_init_hw (struct savagefb_par *par)
 {
 	unsigned char config1, m, n, n1, n2, sr8, cr3f, cr66 = 0, tmp;