Merge branch 'master'

53 files changed, 850 insertions, 607 deletions

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e239a6c2923..a9e33db46e6 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1017,10 +1017,11 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 				status = -ENOMEM;
 				goto cleanup1;
 			}
-			if (ioc->Request.Type.Direction == XFER_WRITE &&
-				copy_from_user(buff[sg_used], data_ptr, sz)) {
+			if (ioc->Request.Type.Direction == XFER_WRITE) {
+				if (copy_from_user(buff[sg_used], data_ptr, sz)) {
 					status = -ENOMEM;
-					goto cleanup1;			
+					goto cleanup1;
+				}
 			} else {
 				memset(buff[sg_used], 0, sz);
 			}
@@ -1138,8 +1139,15 @@ static int revalidate_allvol(ctlr_info_t *host)
 
 	for(i=0; i< NWD; i++) {
 		struct gendisk *disk = host->gendisk[i];
-		if (disk->flags & GENHD_FL_UP)
-			del_gendisk(disk);
+		if (disk) {
+			request_queue_t *q = disk->queue;
+
+			if (disk->flags & GENHD_FL_UP)
+				del_gendisk(disk);
+			if (q)
+				blk_cleanup_queue(q);
+			put_disk(disk);
+		}
 	}
 
         /*
@@ -1453,10 +1461,13 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 	 * allows us to delete disk zero but keep the controller registered.
 	*/
 	if (h->gendisk[0] != disk){
-		if (disk->flags & GENHD_FL_UP){
-			blk_cleanup_queue(disk->queue);
-		del_gendisk(disk);
-			drv->queue = NULL;
+		if (disk) {
+			request_queue_t *q = disk->queue;
+			if (disk->flags & GENHD_FL_UP)
+				del_gendisk(disk);
+			if (q)	
+				blk_cleanup_queue(q);
+			put_disk(disk);	
 		}
 	}
 
@@ -3225,9 +3236,14 @@ static void __devexit cciss_remove_one (struct pci_dev *pdev)
 	/* remove it from the disk list */
 	for (j = 0; j < NWD; j++) {
 		struct gendisk *disk = hba[i]->gendisk[j];
-		if (disk->flags & GENHD_FL_UP) {
-			del_gendisk(disk);
-			blk_cleanup_queue(disk->queue);
+		if (disk) {
+			request_queue_t *q = disk->queue;
+
+			if (disk->flags & GENHD_FL_UP) 
+				del_gendisk(disk);
+			if (q)
+				blk_cleanup_queue(q);
+			put_disk(disk);
 		}
 	}
 
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index cef024a7d04..cd6f45d186a 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -36,8 +36,6 @@
 #include <asm/hardware.h>	/* Pick up IXP2000-specific bits */
 #include <asm/arch/gpio.h>
 
-static struct device_driver ixp2000_i2c_driver;
-
 static inline int ixp2000_scl_pin(void *data)
 {
 	return ((struct ixp2000_i2c_pins*)data)->scl_pin;
@@ -120,7 +118,7 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev)
 	drv_data->algo_data.timeout = 100;
 
 	drv_data->adapter.id = I2C_HW_B_IXP2000,
-	strlcpy(drv_data->adapter.name, ixp2000_i2c_driver.name,
+	strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
 		I2C_NAME_SIZE);
 	drv_data->adapter.algo_data = &drv_data->algo_data,
 
@@ -132,7 +130,7 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev)
 	gpio_line_set(gpio->sda_pin, 0);
 
 	if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) {
-		dev_err(dev, "Could not install, error %d\n", err);
+		dev_err(&plat_dev->dev, "Could not install, error %d\n", err);
 		kfree(drv_data);
 		return err;
 	} 
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index f87220be3c8..e422d8b2d4d 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -35,8 +35,6 @@
 
 #include <asm/hardware.h>	/* Pick up IXP4xx-specific bits */
 
-static struct platform_driver ixp4xx_i2c_driver;
-
 static inline int ixp4xx_scl_pin(void *data)
 {
 	return ((struct ixp4xx_i2c_pins*)data)->scl_pin;
@@ -128,7 +126,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev)
 	drv_data->algo_data.timeout = 100;
 
 	drv_data->adapter.id = I2C_HW_B_IXP4XX;
-	strlcpy(drv_data->adapter.name, ixp4xx_i2c_driver.driver.name,
+	strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name,
 		I2C_NAME_SIZE);
 	drv_data->adapter.algo_data = &drv_data->algo_data;
 
@@ -140,8 +138,7 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev)
 	gpio_line_set(gpio->sda_pin, 0);
 
 	if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) {
-		printk(KERN_ERR "ERROR: Could not install %s\n", 
-				plat_dev->dev.bus_id);
+		printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id);
 
 		kfree(drv_data);
 		return err;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index ed2bc87f475..31e649a9ff7 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -625,7 +625,7 @@ config BLK_DEV_NS87415
 	tristate "NS87415 chipset support"
 	help
 	  This driver adds detection and support for the NS87415 chip
-	  (used in SPARC64, among others).
+	  (used mainly on SPARC64 and PA-RISC machines).
 
 	  Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
 
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index c2f47923d17..9455e42abb2 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -3328,8 +3328,8 @@ static ide_proc_entry_t idecd_proc[] = {
 #endif
 
 static ide_driver_t ide_cdrom_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-cdrom",
 		.bus		= &ide_bus_type,
 		.probe		= ide_cd_probe,
@@ -3510,8 +3510,8 @@ static void __exit ide_cdrom_exit(void)
 {
 	driver_unregister(&ide_cdrom_driver.gen_driver);
 }
- 
-static int ide_cdrom_init(void)
+
+static int __init ide_cdrom_init(void)
 {
 	return driver_register(&ide_cdrom_driver.gen_driver);
 }
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index e827b39e4b3..f4e3d3527b0 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -1089,8 +1089,8 @@ static void ide_device_shutdown(struct device *dev)
 }
 
 static ide_driver_t idedisk_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-disk",
 		.bus		= &ide_bus_type,
 		.probe		= ide_disk_probe,
@@ -1266,7 +1266,7 @@ static void __exit idedisk_exit (void)
 	driver_unregister(&idedisk_driver.gen_driver);
 }
 
-static int idedisk_init (void)
+static int __init idedisk_init(void)
 {
 	return driver_register(&idedisk_driver.gen_driver);
 }
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index f615ab75996..9e293c8063d 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -1925,8 +1925,8 @@ static ide_proc_entry_t idefloppy_proc[] = {
 static int ide_floppy_probe(struct device *);
 
 static ide_driver_t idefloppy_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-floppy",
 		.bus		= &ide_bus_type,
 		.probe		= ide_floppy_probe,
@@ -2191,10 +2191,7 @@ static void __exit idefloppy_exit (void)
 	driver_unregister(&idefloppy_driver.gen_driver);
 }
 
-/*
- *	idefloppy_init will register the driver for each floppy.
- */
-static int idefloppy_init (void)
+static int __init idefloppy_init(void)
 {
 	printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
 	return driver_register(&idefloppy_driver.gen_driver);
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 5275cbb1afe..ecfafcdafea 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -1629,12 +1629,6 @@ EXPORT_SYMBOL(ide_init_drive_cmd);
  *	for the new rq to be completed.  This is VERY DANGEROUS, and is
  *	intended for careful use by the ATAPI tape/cdrom driver code.
  *
- *	If action is ide_next, then the rq is queued immediately after
- *	the currently-being-processed-request (if any), and the function
- *	returns without waiting for the new rq to be completed.  As above,
- *	This is VERY DANGEROUS, and is intended for careful use by the
- *	ATAPI tape/cdrom driver code.
- *
  *	If action is ide_end, then the rq is queued at the end of the
  *	request queue, and the function returns immediately without waiting
  *	for the new rq to be completed. This is again intended for careful
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index b09a6537c7a..41d46dbe6c2 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -410,10 +410,10 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
 {
 	u64 addr = BLK_BOUNCE_HIGH;	/* dma64_addr_t */
 
-	if (on && drive->media == ide_disk) {
-		if (!PCI_DMA_BUS_IS_PHYS)
-			addr = BLK_BOUNCE_ANY;
-		else if (HWIF(drive)->pci_dev)
+	if (!PCI_DMA_BUS_IS_PHYS) {
+		addr = BLK_BOUNCE_ANY;
+	} else if (on && drive->media == ide_disk) {
+		if (HWIF(drive)->pci_dev)
 			addr = HWIF(drive)->pci_dev->dma_mask;
 	}
 
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0ac7eb8f40d..7d7944ed415 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -4748,8 +4748,8 @@ static ide_proc_entry_t idetape_proc[] = {
 static int ide_tape_probe(struct device *);
 
 static ide_driver_t idetape_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-tape",
 		.bus		= &ide_bus_type,
 		.probe		= ide_tape_probe,
@@ -4916,10 +4916,7 @@ static void __exit idetape_exit (void)
 	unregister_chrdev(IDETAPE_MAJOR, "ht");
 }
 
-/*
- *	idetape_init will register the driver for each tape.
- */
-static int idetape_init (void)
+static int __init idetape_init(void)
 {
 	int error = 1;
 	idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 54f9639c2a8..62ebefd6394 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -51,8 +51,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-#define DEBUG_TASKFILE	0	/* unset when fixed */
-
 static void ata_bswap_data (void *buffer, int wcount)
 {
 	u16 *p = buffer;
@@ -765,9 +763,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task)
 	ide_hwif_t *hwif	= HWIF(drive);
 	task_struct_t *taskfile	= (task_struct_t *) task->tfRegister;
 	hob_struct_t *hobfile	= (hob_struct_t *) task->hobRegister;
-#if DEBUG_TASKFILE
-	u8 status;
-#endif
 
 	if (task->data_phase == TASKFILE_MULTI_IN ||
 	    task->data_phase == TASKFILE_MULTI_OUT) {
@@ -778,19 +773,13 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task)
 	}
 
 	/*
-	 * (ks) Check taskfile in/out flags.
+	 * (ks) Check taskfile in flags.
 	 * If set, then execute as it is defined.
 	 * If not set, then define default settings.
 	 * The default values are:
-	 *	write and read all taskfile registers (except data) 
-	 *	write and read the hob registers (sector,nsector,lcyl,hcyl)
+	 *	read all taskfile registers (except data)
+	 *	read the hob registers (sector, nsector, lcyl, hcyl)
 	 */
-	if (task->tf_out_flags.all == 0) {
-		task->tf_out_flags.all = IDE_TASKFILE_STD_OUT_FLAGS;
-		if (drive->addressing == 1)
-			task->tf_out_flags.all |= (IDE_HOB_STD_OUT_FLAGS << 8);
-        }
-
 	if (task->tf_in_flags.all == 0) {
 		task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
 		if (drive->addressing == 1)
@@ -803,16 +792,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task)
 		hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
 	SELECT_MASK(drive, 0);
 
-#if DEBUG_TASKFILE
-	status = hwif->INB(IDE_STATUS_REG);
-	if (status & 0x80) {
-		printk("flagged_taskfile -> Bad status. Status = %02x. wait 100 usec ...\n", status);
-		udelay(100);
-		status = hwif->INB(IDE_STATUS_REG);
-		printk("flagged_taskfile -> Status = %02x\n", status);
-	}
-#endif
-
 	if (task->tf_out_flags.b.data) {
 		u16 data =  taskfile->data + (hobfile->data << 8);
 		hwif->OUTW(data, IDE_DATA_REG);
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 52cadc005d7..a21b1e11eef 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -65,23 +65,6 @@ static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
 #define BUSCLOCK(D)	\
 	((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
 
-#if 0
-		if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
-			(void) pci_read_config_byte(dev, 0x54, &art);
-			p += sprintf(p, "DMA Mode:       %s(%s)",
-				(c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO",
-				(art&0x02)?"2":(art&0x01)?"1":"0");
-			p += sprintf(p, "          %s(%s)",
-				(c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO",
-				(art&0x08)?"2":(art&0x04)?"1":"0");
-			p += sprintf(p, "         %s(%s)",
-				(c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO",
-				(art&0x20)?"2":(art&0x10)?"1":"0");
-			p += sprintf(p, "           %s(%s)\n",
-				(c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
-				(art&0x80)?"2":(art&0x40)?"1":"0");
-		} else {
-#endif
 
 /*
  * TO DO: active tuning and correction of cards without a bios.
@@ -112,13 +95,9 @@ static u8 aec62xx_ratemask (ide_drive_t *drive)
 	switch(hwif->pci_dev->device) {
 		case PCI_DEVICE_ID_ARTOP_ATP865:
 		case PCI_DEVICE_ID_ARTOP_ATP865R:
-#if 0
-			mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3;
-#else
 			mode = (hwif->INB(((hwif->channel) ?
 					hwif->mate->dma_status :
 					hwif->dma_status)) & 0x10) ? 4 : 3;
-#endif
 			break;
 		case PCI_DEVICE_ID_ARTOP_ATP860:
 		case PCI_DEVICE_ID_ARTOP_ATP860R:
@@ -263,35 +242,9 @@ static int aec62xx_irq_timeout (ide_drive_t *drive)
 		case PCI_DEVICE_ID_ARTOP_ATP865:
 		case PCI_DEVICE_ID_ARTOP_ATP865R:
 			printk(" AEC62XX time out ");
-#if 0
-			{
-				int i = 0;
-				u8 reg49h = 0;
-				pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, &reg49h);
-				for (i=0;i<256;i++)
-					pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10);
-				pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10);
-			}
-			return 0;
-#endif
 		default:
 			break;
 	}
-#if 0
-	{
-		ide_hwif_t *hwif	= HWIF(drive);
-		struct pci_dev *dev	= hwif->pci_dev;
-		u8 tmp1 = 0, tmp2 = 0, mode6 = 0;
-
-		pci_read_config_byte(dev, 0x44, &tmp1);
-		pci_read_config_byte(dev, 0x45, &tmp2);
-		printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2);
-		mode6 = HWIF(drive)->INB(((hwif->channel) ?
-					   hwif->mate->dma_status :
-					   hwif->dma_status));
-		printk(" AEC6280 133=%x ", (mode6 & 0x10));
-	}
-#endif
 	return 0;
 }
 
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 6cf49394a80..cf84350efc5 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -876,10 +876,15 @@ static ide_pci_device_t ali15x3_chipset __devinitdata = {
  
 static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	static struct pci_device_id ati_rs100[] = {
+		{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) },
+		{ },
+	};
+
 	ide_pci_device_t *d = &ali15x3_chipset;
 
-	if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL))
-		printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n");
+	if (pci_dev_present(ati_rs100))
+		printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
 
 #if defined(CONFIG_SPARC64)
 	d->init_hwif = init_hwif_common_ali15x3;
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 7dc24682d19..ea3c52cc8ac 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -222,10 +222,9 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 
 	/* We must not grab the entire device, it has 'ISA' space in its
 	   BARS too and we will freak out other bits of the kernel */
-	if(pci_enable_device_bars(dev, 1<<2))
-	{
+	if (pci_enable_device_bars(dev, 1<<2)) {
 		printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
-		return 1;
+		return -ENODEV;
 	}
 	pci_set_master(dev);
 	if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 022d244f2eb..f1ca154dd52 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -6,7 +6,13 @@
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
- *  Documentation available under NDA only
+ *  Documentation for CMD680:
+ *  http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
+ *
+ *  Documentation for SiI 3112:
+ *  http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ *  Errata and other documentation only available under NDA.
  *
  *
  *  FAQ Items:
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 16b3e2d8bfb..75a2253a3e6 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -87,6 +87,7 @@ static const struct {
 	u8 chipset_family;
 	u8 flags;
 } SiSHostChipInfo[] = {
+	{ "SiS965",	PCI_DEVICE_ID_SI_965,	ATA_133  },
 	{ "SiS745",	PCI_DEVICE_ID_SI_745,	ATA_100  },
 	{ "SiS735",	PCI_DEVICE_ID_SI_735,	ATA_100  },
 	{ "SiS733",	PCI_DEVICE_ID_SI_733,	ATA_100  },
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a4d099c937f..7161ce0ef5a 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -79,6 +79,7 @@ static struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
+	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@@ -100,185 +101,14 @@ static struct via_isa_bridge {
 	{ NULL }
 };
 
-static struct via_isa_bridge *via_config;
-static unsigned int via_80w;
 static unsigned int via_clock;
 static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
 
-/*
- * VIA /proc entry.
- */
-
-#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
-
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 via_proc = 0;
-static unsigned long via_base;
-static struct pci_dev *bmide_dev, *isa_dev;
-
-static char *via_control3[] = { "No limit", "64", "128", "192" };
-
-#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg)
-#define via_print_drive(name, format, arg...)\
-	p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n");
-
-
-/**
- *	via_get_info		-	generate via /proc file 
- *	@buffer: buffer for data
- *	@addr: set to start of data to use
- *	@offset: current file offset
- *	@count: size of read
- *
- *	Fills in buffer with the debugging/configuration information for
- *	the VIA chipset tuning and attached drives
- */
- 
-static int via_get_info(char *buffer, char **addr, off_t offset, int count)
+struct via82cxxx_dev
 {
-	int speed[4], cycle[4], setup[4], active[4], recover[4], den[4],
-		 uen[4], udma[4], umul[4], active8b[4], recover8b[4];
-	struct pci_dev *dev = bmide_dev;
-	unsigned int v, u, i;
-	int len;
-	u16 c, w;
-	u8 t, x;
-	char *p = buffer;
-
-	via_print("----------VIA BusMastering IDE Configuration"
-		"----------------");
-
-	via_print("Driver Version:                     3.38");
-	via_print("South Bridge:                       VIA %s",
-		via_config->name);
-
-	pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t);
-	pci_read_config_byte(dev, PCI_REVISION_ID, &x);
-	via_print("Revision:                           ISA %#x IDE %#x", t, x);
-	via_print("Highest DMA rate:                   %s",
-		via_dma[via_config->flags & VIA_UDMA]);
-
-	via_print("BM-DMA base:                        %#lx", via_base);
-	via_print("PCI clock:                          %d.%dMHz",
-		via_clock / 1000, via_clock / 100 % 10);
-
-	pci_read_config_byte(dev, VIA_MISC_1, &t);
-	via_print("Master Read  Cycle IRDY:            %dws",
-		(t & 64) >> 6);
-	via_print("Master Write Cycle IRDY:            %dws",
-		(t & 32) >> 5);
-	via_print("BM IDE Status Register Read Retry:  %s",
-		(t & 8) ? "yes" : "no");
-
-	pci_read_config_byte(dev, VIA_MISC_3, &t);
-	via_print("Max DRDY Pulse Width:               %s%s",
-		via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : "");
-
-	via_print("-----------------------Primary IDE"
-		"-------Secondary IDE------");
-	via_print("Read DMA FIFO flush:   %10s%20s",
-		(t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no");
-	via_print("End Sector FIFO flush: %10s%20s",
-		(t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
-
-	pci_read_config_byte(dev, VIA_IDE_CONFIG, &t);
-	via_print("Prefetch Buffer:       %10s%20s",
-		(t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no");
-	via_print("Post Write Buffer:     %10s%20s",
-		(t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
-
-	pci_read_config_byte(dev, VIA_IDE_ENABLE, &t);
-	via_print("Enabled:               %10s%20s",
-		(t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no");
-
-	c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8);
-	via_print("Simplex only:          %10s%20s",
-		(c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no");
-
-	via_print("Cable Type:            %10s%20s",
-		(via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w");
-
-	via_print("-------------------drive0----drive1"
-		"----drive2----drive3-----");
-
-	pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
-	pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v);
-	pci_read_config_word(dev, VIA_8BIT_TIMING, &w);
-
-	if (via_config->flags & VIA_UDMA)
-		pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-	else u = 0;
-
-	for (i = 0; i < 4; i++) {
-
-		setup[i]     = ((t >> ((3 - i) << 1)) & 0x3) + 1;
-		recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1;
-		active8b[i]  = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1;
-		active[i]    = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1;
-		recover[i]   = ((v >> ((3 - i) << 3)) & 0xf) + 1;
-		udma[i]      = ((u >> ((3 - i) << 3)) & 0x7) + 2;
-		umul[i]      = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2;
-		uen[i]       = ((u >> ((3 - i) << 3)) & 0x20);
-		den[i]       = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2));
-
-		speed[i] = 2 * via_clock / (active[i] + recover[i]);
-		cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock;
-
-		if (!uen[i] || !den[i])
-			continue;
-
-		switch (via_config->flags & VIA_UDMA) {
-
-			case VIA_UDMA_33:
-				speed[i] = 2 * via_clock / udma[i];
-				cycle[i] = 1000000 * udma[i] / via_clock;
-				break;
-
-			case VIA_UDMA_66:
-				speed[i] = 4 * via_clock / (udma[i] * umul[i]);
-				cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock;
-				break;
-
-			case VIA_UDMA_100:
-				speed[i] = 6 * via_clock / udma[i];
-				cycle[i] = 333333 * udma[i] / via_clock;
-				break;
-
-			case VIA_UDMA_133:
-				speed[i] = 8 * via_clock / udma[i];
-				cycle[i] = 250000 * udma[i] / via_clock;
-				break;
-		}
-	}
-
-	via_print_drive("Transfer Mode: ", "%10s",
-		den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO");
-
-	via_print_drive("Address Setup: ", "%8dns",
-		1000000 * setup[i] / via_clock);
-	via_print_drive("Cmd Active:    ", "%8dns",
-		1000000 * active8b[i] / via_clock);
-	via_print_drive("Cmd Recovery:  ", "%8dns",
-		1000000 * recover8b[i] / via_clock);
-	via_print_drive("Data Active:   ", "%8dns",
-		1000000 * active[i] / via_clock);
-	via_print_drive("Data Recovery: ", "%8dns",
-		1000000 * recover[i] / via_clock);
-	via_print_drive("Cycle Time:    ", "%8dns",
-		cycle[i]);
-	via_print_drive("Transfer Rate: ", "%4d.%dMB/s",
-		speed[i] / 1000, speed[i] / 100 % 10);
-
-	/* hoping it is less than 4K... */
-	len = (p - buffer) - offset;
-	*addr = buffer + offset;
-
-	return len > count ? count : len;
-}
-
-#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
+	struct via_isa_bridge *via_config;
+	unsigned int via_80w;
+};
 
 /**
  *	via_set_speed			-	write timing registers
@@ -289,11 +119,13 @@ static int via_get_info(char *buffer, char **addr, off_t offset, int count)
  *	via_set_speed writes timing values to the chipset registers
  */
 
-static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
+static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 {
+	struct pci_dev *dev = hwif->pci_dev;
+	struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
 	u8 t;
 
-	if (~via_config->flags & VIA_BAD_AST) {
+	if (~vdev->via_config->flags & VIA_BAD_AST) {
 		pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
 		t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
 		pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
@@ -305,7 +137,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
 	pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
 		((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
 
-	switch (via_config->flags & VIA_UDMA) {
+	switch (vdev->via_config->flags & VIA_UDMA) {
 		case VIA_UDMA_33:  t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
 		case VIA_UDMA_66:  t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
 		case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
@@ -329,6 +161,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
 static int via_set_drive(ide_drive_t *drive, u8 speed)
 {
 	ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+	struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif);
 	struct ide_timing t, p;
 	unsigned int T, UT;
 
@@ -337,7 +170,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
 
 	T = 1000000000 / via_clock;
 
-	switch (via_config->flags & VIA_UDMA) {
+	switch (vdev->via_config->flags & VIA_UDMA) {
 		case VIA_UDMA_33:   UT = T;   break;
 		case VIA_UDMA_66:   UT = T/2; break;
 		case VIA_UDMA_100:  UT = T/3; break;
@@ -352,7 +185,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
 		ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
 	}
 
-	via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
+	via_set_speed(HWIF(drive), drive->dn, &t);
 
 	if (!drive->init_speed)
 		drive->init_speed = speed;
@@ -390,20 +223,41 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
  
 static int via82cxxx_ide_dma_check (ide_drive_t *drive)
 {
-	u16 w80 = HWIF(drive)->udma_four;
+	ide_hwif_t *hwif = HWIF(drive);
+	struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
+	u16 w80 = hwif->udma_four;
 
 	u16 speed = ide_find_best_mode(drive,
 		XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
-		(via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
-		(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
-		(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
-		(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
+		(vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
+		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
+		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
+		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
 
 	via_set_drive(drive, speed);
 
 	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
-		return HWIF(drive)->ide_dma_on(drive);
-	return HWIF(drive)->ide_dma_off_quietly(drive);
+		return hwif->ide_dma_on(drive);
+	return hwif->ide_dma_off_quietly(drive);
+}
+
+static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
+{
+	struct via_isa_bridge *via_config;
+	u8 t;
+
+	for (via_config = via_isa_bridges; via_config->id; via_config++)
+		if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA +
+			!!(via_config->flags & VIA_BAD_ID),
+			via_config->id, NULL))) {
+
+			pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
+			if (t >= via_config->rev_min &&
+			    t <= via_config->rev_max)
+				break;
+		}
+
+	return via_config;
 }
 
 /**
@@ -418,82 +272,28 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive)
 static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
 {
 	struct pci_dev *isa = NULL;
+	struct via_isa_bridge *via_config;
 	u8 t, v;
 	unsigned int u;
-	int i;
 
 	/*
 	 * Find the ISA bridge to see how good the IDE is.
 	 */
-
-	for (via_config = via_isa_bridges; via_config->id; via_config++)
-		if ((isa = pci_find_device(PCI_VENDOR_ID_VIA +
-			!!(via_config->flags & VIA_BAD_ID),
-			via_config->id, NULL))) {
-
-			pci_read_config_byte(isa, PCI_REVISION_ID, &t);
-			if (t >= via_config->rev_min &&
-			    t <= via_config->rev_max)
-				break;
-		}
-
+	via_config = via_config_find(&isa);
 	if (!via_config->id) {
 		printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
 		return -ENODEV;
 	}
 
 	/*
-	 * Check 80-wire cable presence and setup Clk66.
+	 * Setup or disable Clk66 if appropriate
 	 */
 
-	switch (via_config->flags & VIA_UDMA) {
-
-		case VIA_UDMA_66:
-			/* Enable Clk66 */
-			pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-			pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> (i & 16)) & 8) &&
-				    ((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 2)) {
-					/*
-					 * 2x PCI clock and
-					 * UDMA w/ < 3T/cycle
-					 */
-					via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-		case VIA_UDMA_100:
-			pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> i) & 0x10) ||
-				    (((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 4))) {
-					/* BIOS 80-wire bit or
-					 * UDMA w/ < 60ns/cycle
-					 */
-					via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-		case VIA_UDMA_133:
-			pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> i) & 0x10) ||
-				    (((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 6))) {
-					/* BIOS 80-wire bit or
-					 * UDMA w/ < 60ns/cycle
-					 */
-					via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-	}
-
-	/* Disable Clk66 */
-	if (via_config->flags & VIA_BAD_CLK66) {
+	if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) {
+		/* Enable Clk66 */
+		pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+		pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
+	} else if (via_config->flags & VIA_BAD_CLK66) {
 		/* Would cause trouble on 596a and 686 */
 		pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
 		pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
@@ -560,26 +360,78 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
 		via_dma[via_config->flags & VIA_UDMA],
 		pci_name(dev));
 
-	/*
-	 * Setup /proc/ide/via entry.
-	 */
+	return 0;
+}
+
+/*
+ * Check and handle 80-wire cable presence
+ */
+static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev)
+{
+	unsigned int u;
+	int i;
+	pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+
+	switch (vdev->via_config->flags & VIA_UDMA) {
+
+		case VIA_UDMA_66:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> (i & 16)) & 8) &&
+				    ((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 2)) {
+					/*
+					 * 2x PCI clock and
+					 * UDMA w/ < 3T/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+
+		case VIA_UDMA_100:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> i) & 0x10) ||
+				    (((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 4))) {
+					/* BIOS 80-wire bit or
+					 * UDMA w/ < 60ns/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+
+		case VIA_UDMA_133:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> i) & 0x10) ||
+				    (((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 6))) {
+					/* BIOS 80-wire bit or
+					 * UDMA w/ < 60ns/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
 
-#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
-	if (!via_proc) {
-		via_base = pci_resource_start(dev, 4);
-		bmide_dev = dev;
-		isa_dev = isa;
-		ide_pci_create_host_proc("via", via_get_info);
-		via_proc = 1;
 	}
-#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
-	return 0;
 }
 
 static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 {
+	struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev),
+		GFP_KERNEL);
+	struct pci_dev *isa = NULL;
 	int i;
 
+	if (vdev == NULL) {
+		printk(KERN_ERR "VP_IDE: out of memory :(\n");
+		return;
+	}
+
+	memset(vdev, 0, sizeof(struct via82cxxx_dev));
+	ide_set_hwifdata(hwif, vdev);
+
+	vdev->via_config = via_config_find(&isa);
+	via_cable_detect(hwif->pci_dev, vdev);
+
 	hwif->autodma = 0;
 
 	hwif->tuneproc = &via82cxxx_tune_drive;
@@ -594,7 +446,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 
 	for (i = 0; i < 2; i++) {
 		hwif->drives[i].io_32bit = 1;
-		hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
+		hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
 		hwif->drives[i].autotune = 1;
 		hwif->drives[i].dn = hwif->channel * 2 + i;
 	}
@@ -608,7 +460,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 	hwif->swdma_mask = 0x07;
 
 	if (!hwif->udma_four)
-		hwif->udma_four = (via_80w >> hwif->channel) & 1;
+		hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1;
 	hwif->ide_dma_check = &via82cxxx_ide_dma_check;
 	if (!noautodma)
 		hwif->autodma = 1;
@@ -616,24 +468,35 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 	hwif->drives[1].autodma = hwif->autodma;
 }
 
-static ide_pci_device_t via82cxxx_chipset __devinitdata = {
-	.name		= "VP_IDE",
-	.init_chipset	= init_chipset_via82cxxx,
-	.init_hwif	= init_hwif_via82cxxx,
-	.channels	= 2,
-	.autodma	= NOAUTODMA,
-	.enablebits	= {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
-	.bootable	= ON_BOARD,
+static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
+	{	/* 0 */
+		.name		= "VP_IDE",
+		.init_chipset	= init_chipset_via82cxxx,
+		.init_hwif	= init_hwif_via82cxxx,
+		.channels	= 2,
+		.autodma	= NOAUTODMA,
+		.enablebits	= {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
+		.bootable	= ON_BOARD
+	},{	/* 1 */
+		.name		= "VP_IDE",
+		.init_chipset	= init_chipset_via82cxxx,
+		.init_hwif	= init_hwif_via82cxxx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
+		.bootable	= ON_BOARD,
+	}
 };
 
 static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &via82cxxx_chipset);
+	return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]);
 }
 
 static struct pci_device_id via_pci_tbl[] = {
 	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, via_pci_tbl);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 136911a86e8..16b28357885 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1401,20 +1401,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
 	/* We probe the hwif now */
 	probe_hwif_init(hwif);
 
-	/* The code IDE code will have set hwif->present if we have devices attached,
-	 * if we don't, the discard the interface except if we are on a media bay slot
-	 */
-	if (!hwif->present && !pmif->mediabay) {
-		printk(KERN_INFO "ide%d: Bus empty, interface released.\n",
-			hwif->index);
-		default_hwif_iops(hwif);
-		for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; ++i)
-			hwif->io_ports[i] = 0;
-		hwif->chipset = ide_unknown;
-		hwif->noprobe = 1;
-		return -ENODEV;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index d4f2111d436..7ebf992e8c2 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -787,7 +787,7 @@ static int pre_init = 1;		/* Before first ordered IDE scan */
 static LIST_HEAD(ide_pci_drivers);
 
 /*
- *	__ide_register_pci_driver	-	attach IDE driver
+ *	__ide_pci_register_driver	-	attach IDE driver
  *	@driver: pci driver
  *	@module: owner module of the driver
  *
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 5ea741f47fc..e73f81c2238 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -312,7 +312,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf,
 	int ret, length, hdr_len, copy_offset;
 	int rmpp_active = 0;
 
-	if (count < sizeof (struct ib_user_mad))
+	if (count < sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR)
 		return -EINVAL;
 
 	length = count - sizeof (struct ib_user_mad);
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 760c418d5bc..dd4e13303e9 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -730,15 +730,16 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 	}
 
 	if (attr_mask & IB_QP_ACCESS_FLAGS) {
+		qp_context->params2 |=
+			cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_WRITE ?
+				    MTHCA_QP_BIT_RWE : 0);
+
 		/*
-		 * Only enable RDMA/atomics if we have responder
-		 * resources set to a non-zero value.
+		 * Only enable RDMA reads and atomics if we have
+		 * responder resources set to a non-zero value.
 		 */
 		if (qp->resp_depth) {
 			qp_context->params2 |=
-				cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_WRITE ?
-					    MTHCA_QP_BIT_RWE : 0);
-			qp_context->params2 |=
 				cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_READ ?
 					    MTHCA_QP_BIT_RRE : 0);
 			qp_context->params2 |=
@@ -759,31 +760,27 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 		if (qp->resp_depth && !attr->max_dest_rd_atomic) {
 			/*
 			 * Lowering our responder resources to zero.
-			 * Turn off RDMA/atomics as responder.
-			 * (RWE/RRE/RAE in params2 already zero)
+			 * Turn off reads RDMA and atomics as responder.
+			 * (RRE/RAE in params2 already zero)
 			 */
-			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE |
-								MTHCA_QP_OPTPAR_RRE |
+			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE |
 								MTHCA_QP_OPTPAR_RAE);
 		}
 
 		if (!qp->resp_depth && attr->max_dest_rd_atomic) {
 			/*
 			 * Increasing our responder resources from
-			 * zero.  Turn on RDMA/atomics as appropriate.
+			 * zero.  Turn on RDMA reads and atomics as
+			 * appropriate.
 			 */
 			qp_context->params2 |=
-				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_WRITE ?
-					    MTHCA_QP_BIT_RWE : 0);
-			qp_context->params2 |=
 				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_READ ?
 					    MTHCA_QP_BIT_RRE : 0);
 			qp_context->params2 |=
 				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_ATOMIC ?
 					    MTHCA_QP_BIT_RAE : 0);
 
-			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE |
-								MTHCA_QP_OPTPAR_RRE |
+			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE |
 								MTHCA_QP_OPTPAR_RAE);
 		}
 
@@ -921,10 +918,12 @@ static void mthca_adjust_qp_caps(struct mthca_dev *dev,
         else
 		qp->max_inline_data = max_data_size - MTHCA_INLINE_HEADER_SIZE;
 
-	qp->sq.max_gs = max_data_size / sizeof (struct mthca_data_seg);
-	qp->rq.max_gs = (min(dev->limits.max_desc_sz, 1 << qp->rq.wqe_shift) -
-			sizeof (struct mthca_next_seg)) /
-			sizeof (struct mthca_data_seg);
+	qp->sq.max_gs = min_t(int, dev->limits.max_sg,
+			      max_data_size / sizeof (struct mthca_data_seg));
+	qp->rq.max_gs = min_t(int, dev->limits.max_sg,
+			       (min(dev->limits.max_desc_sz, 1 << qp->rq.wqe_shift) -
+				sizeof (struct mthca_next_seg)) /
+			       sizeof (struct mthca_data_seg));
 }
 
 /*
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 321a3a10e69..ee9fe226ae9 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -802,13 +802,21 @@ static int srp_post_recv(struct srp_target_port *target)
 
 /*
  * Must be called with target->scsi_host->host_lock held to protect
- * req_lim and tx_head.
+ * req_lim and tx_head.  Lock cannot be dropped between call here and
+ * call to __srp_post_send().
  */
 static struct srp_iu *__srp_get_tx_iu(struct srp_target_port *target)
 {
 	if (target->tx_head - target->tx_tail >= SRP_SQ_SIZE)
 		return NULL;
 
+	if (unlikely(target->req_lim < 1)) {
+		if (printk_ratelimit())
+			printk(KERN_DEBUG PFX "Target has req_lim %d\n",
+			       target->req_lim);
+		return NULL;
+	}
+
 	return target->tx_ring[target->tx_head & SRP_SQ_SIZE];
 }
 
@@ -823,11 +831,6 @@ static int __srp_post_send(struct srp_target_port *target,
 	struct ib_send_wr wr, *bad_wr;
 	int ret = 0;
 
-	if (target->req_lim < 1) {
-		printk(KERN_ERR PFX "Target has req_lim %d\n", target->req_lim);
-		return -EAGAIN;
-	}
-
 	list.addr   = iu->dma;
 	list.length = len;
 	list.lkey   = target->srp_host->mr->lkey;
@@ -1417,6 +1420,8 @@ static ssize_t srp_create_target(struct class_device *class_dev,
 	if (!target_host)
 		return -ENOMEM;
 
+	target_host->max_lun = SRP_MAX_LUN;
+
 	target = host_to_target(target_host);
 	memset(target, 0, sizeof *target);
 
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index 4fec28a7136..b564f18caf7 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -54,6 +54,7 @@ enum {
 	SRP_PORT_REDIRECT	= 1,
 	SRP_DLID_REDIRECT	= 2,
 
+	SRP_MAX_LUN		= 512,
 	SRP_MAX_IU_LEN		= 256,
 
 	SRP_RQ_SHIFT    	= 6,
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index 801c98f30e5..c82105920d7 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -110,7 +110,7 @@ config HISAX_16_3
 
 config HISAX_TELESPCI
 	bool "Teles PCI"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the Teles PCI.
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -238,7 +238,7 @@ config HISAX_MIC
 
 config HISAX_NETJET
 	bool "NETjet card"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the NetJet from Traverse
 	  Technologies.
@@ -249,7 +249,7 @@ config HISAX_NETJET
 
 config HISAX_NETJET_U
 	bool "NETspider U card"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the Netspider U interface ISDN card
 	  from Traverse Technologies.
@@ -317,7 +317,7 @@ config HISAX_GAZEL
 
 config HISAX_HFC_PCI
 	bool "HFC PCI-Bus cards"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 
@@ -344,14 +344,14 @@ config HISAX_HFC_SX
 
 config HISAX_ENTERNOW_PCI
 	bool "Formula-n enter:now PCI card"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the Formula-n enter:now PCI
 	  ISDN card.
 
 config HISAX_AMD7930
 	bool "Am7930 (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (SPARC32 || SPARC64)
+	depends on EXPERIMENTAL && SPARC
 	help
 	  This enables HiSax support for the AMD7930 chips on some SPARCs.
 	  This code is not finished yet.
diff --git a/drivers/isdn/pcbit/Kconfig b/drivers/isdn/pcbit/Kconfig
index f06997faef1..0933881ab0c 100644
--- a/drivers/isdn/pcbit/Kconfig
+++ b/drivers/isdn/pcbit/Kconfig
@@ -3,7 +3,7 @@
 #
 config ISDN_DRV_PCBIT
 	tristate "PCBIT-D support"
-	depends on ISDN_I4L && ISA && (BROKEN || !PPC)
+	depends on ISDN_I4L && ISA && (BROKEN || X86)
 	help
 	  This enables support for the PCBIT ISDN-card.  This card is
 	  manufactured in Portugal by Octal.  For running this card,
diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c
index 35097c9bbf5..b8ccb0a9578 100644
--- a/drivers/mtd/maps/ipaq-flash.c
+++ b/drivers/mtd/maps/ipaq-flash.c
@@ -246,7 +246,7 @@ int __init ipaq_mtd_init(void)
 			ipaq_map[i].size = h3xxx_max_flash_size;
 			ipaq_map[i].set_vpp = h3xxx_set_vpp;
 			ipaq_map[i].phys = cs_phys[i];
-			ipaq_map[i].virt = __ioremap(cs_phys[i], 0x04000000, 0, 1);
+			ipaq_map[i].virt = ioremap(cs_phys[i], 0x04000000);
 			if (machine_is_h3100 () || machine_is_h1900())
 				ipaq_map[i].bankwidth = 2;
 		}
@@ -280,7 +280,7 @@ int __init ipaq_mtd_init(void)
 		nb_parts = ARRAY_SIZE(jornada_partitions);
 		ipaq_map[0].size = jornada_max_flash_size;
 		ipaq_map[0].set_vpp = jornada56x_set_vpp;
-		ipaq_map[0].virt = (__u32)__ioremap(0x0, 0x04000000, 0, 1);
+		ipaq_map[0].virt = (__u32)ioremap(0x0, 0x04000000);
 	}
 #endif
 #ifdef CONFIG_SA1100_JORNADA720
@@ -442,7 +442,7 @@ static int __init h1900_special_case(void)
 	ipaq_map[0].size = 0x80000;
 	ipaq_map[0].set_vpp = h3xxx_set_vpp;
 	ipaq_map[0].phys = 0x0;
-	ipaq_map[0].virt = __ioremap(0x0, 0x04000000, 0, 1);
+	ipaq_map[0].virt = ioremap(0x0, 0x04000000);
 	ipaq_map[0].bankwidth = 2;
 
 	printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c
index fc7a78e3173..2c9cc7f37e9 100644
--- a/drivers/mtd/maps/ixp2000.c
+++ b/drivers/mtd/maps/ixp2000.c
@@ -159,12 +159,12 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 		return -ENODEV;
 
 	window_size = dev->resource->end - dev->resource->start + 1;
-	dev_info(_dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n",
-			ixp_data->nr_banks, ((u32)window_size >> 20));
+	dev_info(&dev->dev, "Probe of IXP2000 flash(%d banks x %dMiB)\n",
+		 ixp_data->nr_banks, ((u32)window_size >> 20));
 
 	if (plat->width != 1) {
-		dev_err(_dev, "IXP2000 MTD map only supports 8-bit mode, asking for %d\n",
-				plat->width * 8);
+		dev_err(&dev->dev, "IXP2000 MTD map only supports 8-bit mode, asking for %d\n",
+			plat->width * 8);
 		return -EIO;
 	}
 
@@ -202,7 +202,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 			dev->resource->end - dev->resource->start + 1,
 			dev->dev.bus_id);
 	if (!info->res) {
-		dev_err(_dev, "Could not reserve memory region\n");
+		dev_err(&dev->dev, "Could not reserve memory region\n");
 		err = -ENOMEM;
 		goto Error;
 	}
@@ -210,7 +210,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 	info->map.map_priv_1 = (unsigned long) ioremap(dev->resource->start,
 			    	dev->resource->end - dev->resource->start + 1);
 	if (!info->map.map_priv_1) {
-		dev_err(_dev, "Failed to ioremap flash region\n");
+		dev_err(&dev->dev, "Failed to ioremap flash region\n");
 		err = -EIO;
 		goto Error;
 	}
@@ -221,13 +221,13 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 	 */
 
 	erratum44_workaround = ixp2000_has_broken_slowport();
-	dev_info(_dev, "Erratum 44 workaround %s\n",
+	dev_info(&dev->dev, "Erratum 44 workaround %s\n",
 	       erratum44_workaround ? "enabled" : "disabled");
 #endif
 
 	info->mtd = do_map_probe(plat->map_name, &info->map);
 	if (!info->mtd) {
-		dev_err(_dev, "map_probe failed\n");
+		dev_err(&dev->dev, "map_probe failed\n");
 		err = -ENXIO;
 		goto Error;
 	}
@@ -237,7 +237,7 @@ static int ixp2000_flash_probe(struct platform_device *dev)
 	if (err > 0) {
 		err = add_mtd_partitions(info->mtd, info->partitions, err);
 		if(err)
-			dev_err(_dev, "Could not parse partitions\n");
+			dev_err(&dev->dev, "Could not parse partitions\n");
 	}
 
 	if (err)
@@ -251,8 +251,8 @@ Error:
 }
 
 static struct platform_driver ixp2000_flash_driver = {
-	.probe		= &ixp2000_flash_probe,
-	.remove		= &ixp2000_flash_remove
+	.probe		= ixp2000_flash_probe,
+	.remove		= ixp2000_flash_remove,
 	.driver		= {
 		.name	= "IXP2000-Flash",
 	},
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 041e4b3358f..f68f7a99a63 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -112,7 +112,7 @@ static int __init h1910_init (void)
 	if (!machine_is_h1900())
 		return -ENODEV;
 
-	nandaddr = __ioremap(0x08000000, 0x1000, 0, 1);
+	nandaddr = ioremap(0x08000000, 0x1000);
 	if (!nandaddr) {
 		printk("Failed to ioremap nand flash.\n");
 		return -ENOMEM;
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 332e9953c55..cd0b1dccfb6 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -32,6 +32,7 @@
  * 
  */
 
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 7a6aeae2c9f..22cd0455670 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -156,7 +156,7 @@
 
 #define DRV_NAME		"e100"
 #define DRV_EXT		"-NAPI"
-#define DRV_VERSION		"3.4.14-k2"DRV_EXT
+#define DRV_VERSION		"3.4.14-k4"DRV_EXT
 #define DRV_DESCRIPTION		"Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT		"Copyright(c) 1999-2005 Intel Corporation"
 #define PFX			DRV_NAME ": "
@@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
 
 static void e100_get_defaults(struct nic *nic)
 {
-	struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
-	struct param_range cbs  = { .min = 64, .max = 256, .count = 64 };
+	struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+	struct param_range cbs  = { .min = 64, .max = 256, .count = 128 };
 
 	pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
 	/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1007,25 +1007,264 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
 }
 
+/********************************************************/
+/*  Micro code for 8086:1229 Rev 8                      */
+/********************************************************/
+
+/*  Parameter values for the D101M B-step  */
+#define D101M_CPUSAVER_TIMER_DWORD		78
+#define D101M_CPUSAVER_BUNDLE_DWORD		65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD		126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/*  Micro code for 8086:1229 Rev 9                      */
+/********************************************************/
+
+/*  Parameter values for the D101S  */
+#define D101S_CPUSAVER_TIMER_DWORD		78
+#define D101S_CPUSAVER_BUNDLE_DWORD		67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD		128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700  \
+}
+
+/********************************************************/
+/*  Micro code for the 8086:1229 Rev F/10               */
+/********************************************************/
+
+/*  Parameter values for the D102 E-step  */
+#define D102_E_CPUSAVER_TIMER_DWORD		42
+#define D102_E_CPUSAVER_BUNDLE_DWORD		54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD		46
+
+#define     D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
 static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
-	int i;
-	static const u32 ucode[UCODE_SIZE] = {
-		/* NFS packets are misinterpreted as TCO packets and
-		 * incorrectly routed to the BMC over SMBus.  This
-		 * microcode patch checks the fragmented IP bit in the
-		 * NFS/UDP header to distinguish between NFS and TCO. */
-		0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
-		0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
-		0x00906EFD, 0x00900EFD,	0x00E00EF8,
-	};
-
-	if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
-		for(i = 0; i < UCODE_SIZE; i++)
+/* *INDENT-OFF* */
+	static struct {
+		u32 ucode[UCODE_SIZE + 1];
+		u8 mac;
+		u8 timer_dword;
+		u8 bundle_dword;
+		u8 min_size_dword;
+	} ucode_opts[] = {
+		{ D101M_B_RCVBUNDLE_UCODE,
+		  mac_82559_D101M,
+		  D101M_CPUSAVER_TIMER_DWORD,
+		  D101M_CPUSAVER_BUNDLE_DWORD,
+		  D101M_CPUSAVER_MIN_SIZE_DWORD },
+		{ D101S_RCVBUNDLE_UCODE,
+		  mac_82559_D101S,
+		  D101S_CPUSAVER_TIMER_DWORD,
+		  D101S_CPUSAVER_BUNDLE_DWORD,
+		  D101S_CPUSAVER_MIN_SIZE_DWORD },
+		{ D102_E_RCVBUNDLE_UCODE,
+		  mac_82551_F,
+		  D102_E_CPUSAVER_TIMER_DWORD,
+		  D102_E_CPUSAVER_BUNDLE_DWORD,
+		  D102_E_CPUSAVER_MIN_SIZE_DWORD },
+		{ D102_E_RCVBUNDLE_UCODE,
+		  mac_82551_10,
+		  D102_E_CPUSAVER_TIMER_DWORD,
+		  D102_E_CPUSAVER_BUNDLE_DWORD,
+		  D102_E_CPUSAVER_MIN_SIZE_DWORD },
+		{ {0}, 0, 0, 0, 0}
+	}, *opts;
+/* *INDENT-ON* */
+
+/*************************************************************************
+*  CPUSaver parameters
+*
+*  All CPUSaver parameters are 16-bit literals that are part of a
+*  "move immediate value" instruction.  By changing the value of
+*  the literal in the instruction before the code is loaded, the
+*  driver can change the algorithm.
+*
+*  INTDELAY - This loads the dead-man timer with its inital value.
+*    When this timer expires the interrupt is asserted, and the 
+*    timer is reset each time a new packet is received.  (see
+*    BUNDLEMAX below to set the limit on number of chained packets)
+*    The current default is 0x600 or 1536.  Experiments show that
+*    the value should probably stay within the 0x200 - 0x1000.
+*
+*  BUNDLEMAX - 
+*    This sets the maximum number of frames that will be bundled.  In
+*    some situations, such as the TCP windowing algorithm, it may be
+*    better to limit the growth of the bundle size than let it go as
+*    high as it can, because that could cause too much added latency.
+*    The default is six, because this is the number of packets in the
+*    default TCP window size.  A value of 1 would make CPUSaver indicate
+*    an interrupt for every frame received.  If you do not want to put
+*    a limit on the bundle size, set this value to xFFFF.
+*
+*  BUNDLESMALL - 
+*    This contains a bit-mask describing the minimum size frame that
+*    will be bundled.  The default masks the lower 7 bits, which means
+*    that any frame less than 128 bytes in length will not be bundled,
+*    but will instead immediately generate an interrupt.  This does
+*    not affect the current bundle in any way.  Any frame that is 128
+*    bytes or large will be bundled normally.  This feature is meant
+*    to provide immediate indication of ACK frames in a TCP environment.
+*    Customers were seeing poor performance when a machine with CPUSaver
+*    enabled was sending but not receiving.  The delay introduced when
+*    the ACKs were received was enough to reduce total throughput, because
+*    the sender would sit idle until the ACK was finally seen.
+*
+*    The current default is 0xFF80, which masks out the lower 7 bits.
+*    This means that any frame which is x7F (127) bytes or smaller
+*    will cause an immediate interrupt.  Because this value must be a 
+*    bit mask, there are only a few valid values that can be used.  To
+*    turn this feature off, the driver can write the value xFFFF to the
+*    lower word of this instruction (in the same way that the other
+*    parameters are used).  Likewise, a value of 0xF800 (2047) would
+*    cause an interrupt to be generated for every frame, because all
+*    standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the 
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+	/* do not load u-code for ICH devices */
+	if (nic->flags & ich)
+		goto noloaducode;
+
+	/* Search for ucode match against h/w rev_id */
+	for (opts = ucode_opts; opts->mac; opts++) {
+		int i;
+		u32 *ucode = opts->ucode;
+		if (nic->mac != opts->mac)
+			continue;
+
+		/* Insert user-tunable settings */
+		ucode[opts->timer_dword] &= 0xFFFF0000;
+		ucode[opts->timer_dword] |= INTDELAY;
+		ucode[opts->bundle_dword] &= 0xFFFF0000;
+		ucode[opts->bundle_dword] |= BUNDLEMAX;
+		ucode[opts->min_size_dword] &= 0xFFFF0000;
+		ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80;
+
+		for (i = 0; i < UCODE_SIZE; i++)
 			cb->u.ucode[i] = cpu_to_le32(ucode[i]);
 		cb->command = cpu_to_le16(cb_ucode);
-	} else
-		cb->command = cpu_to_le16(cb_nop);
+		return;
+	}
+
+noloaducode:
+	cb->command = cpu_to_le16(cb_nop);
 }
 
 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig
index 94e7a9af870..a84c232395e 100644
--- a/drivers/net/fec_8xx/Kconfig
+++ b/drivers/net/fec_8xx/Kconfig
@@ -1,6 +1,6 @@
 config FEC_8XX
 	tristate "Motorola 8xx FEC driver"
-	depends on NET_ETHERNET && FEC
+	depends on NET_ETHERNET && 8xx
 	select MII
 
 config FEC_8XX_GENERIC_PHY
diff --git a/drivers/net/ioc3-eth.c b/drivers/net/ioc3-eth.c
index 6a3129bc15a..9b8295ee06e 100644
--- a/drivers/net/ioc3-eth.c
+++ b/drivers/net/ioc3-eth.c
@@ -1360,7 +1360,7 @@ static struct pci_driver ioc3_driver = {
 
 static int __init ioc3_init_module(void)
 {
-	return pci_module_init(&ioc3_driver);
+	return pci_register_driver(&ioc3_driver);
 }
 
 static void __exit ioc3_cleanup_module(void)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 159b56a56ef..14a76f7cf90 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1346,10 +1346,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out,
 	} else {
 		if (netif_msg_probe(tp)) {
 			printk(KERN_ERR PFX
-			       "Cannot find PowerManagement capability. "
-			       "Aborting.\n");
+			       "PowerManagement capability not found.\n");
 		}
-		goto err_out_mwi;
 	}
 
 	/* make sure PCI base addr 1 is MMIO */
@@ -2516,7 +2514,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 	} while (boguscnt > 0);
 
 	if (boguscnt <= 0) {
-		if (net_ratelimit() && netif_msg_intr(tp)) {
+		if (netif_msg_intr(tp) && net_ratelimit() ) {
 			printk(KERN_WARNING
 			       "%s: Too much work at interrupt!\n", dev->name);
 		}
diff --git a/drivers/net/saa9730.h b/drivers/net/saa9730.h
index 9e9da6b4080..a7e9d29a86a 100644
--- a/drivers/net/saa9730.h
+++ b/drivers/net/saa9730.h
@@ -1,6 +1,7 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2000, 2005  MIPS Technologies, Inc.  All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  * ########################################################################
  *
@@ -265,6 +266,7 @@
 
 /* The SAA9730 (LAN) controller register map, as seen via the PCI-bus. */
 #define SAA9730_LAN_REGS_ADDR   0x20400
+#define SAA9730_LAN_REGS_SIZE   0x00400
 
 struct lan_saa9730_regmap {
 	volatile unsigned int TxBuffA;			/* 0x20400 */
@@ -309,6 +311,7 @@ typedef volatile struct lan_saa9730_regmap t_lan_saa9730_regmap;
 
 /* The SAA9730 (EVM) controller register map, as seen via the PCI-bus. */
 #define SAA9730_EVM_REGS_ADDR   0x02000
+#define SAA9730_EVM_REGS_SIZE   0x00400
 
 struct evm_saa9730_regmap {
 	volatile unsigned int InterruptStatus1;		/* 0x2000 */
@@ -329,16 +332,32 @@ typedef volatile struct evm_saa9730_regmap t_evm_saa9730_regmap;
 
 
 struct lan_saa9730_private {
+	/*
+	 * Rx/Tx packet buffers.
+	 * The Rx and Tx packets must be PACKET_SIZE aligned.
+	 */
+	void		*buffer_start;
+	unsigned int	buffer_size;
+
+	/*
+	 * DMA address of beginning of this object, returned
+	 * by pci_alloc_consistent().
+	 */
+	dma_addr_t	dma_addr;
+
+	/* Pointer to the associated pci device structure */
+	struct pci_dev	*pci_dev;
+
 	/* Pointer for the SAA9730 LAN controller register set. */
 	t_lan_saa9730_regmap *lan_saa9730_regs;
 
 	/* Pointer to the SAA9730 EVM register. */
 	t_evm_saa9730_regmap *evm_saa9730_regs;
 
-	/* TRUE if the next buffer to write is RxBuffA,  FALSE if RxBuffB. */
-	unsigned char NextRcvToUseIsA;
 	/* Rcv buffer Index. */
 	unsigned char NextRcvPacketIndex;
+	/* Next buffer index. */
+	unsigned char NextRcvBufferIndex;
 
 	/* Index of next packet to use in that buffer. */
 	unsigned char NextTxmPacketIndex;
@@ -353,13 +372,8 @@ struct lan_saa9730_private {
 	unsigned char DmaRcvPackets;
 	unsigned char DmaTxmPackets;
 
-	unsigned char RcvAIndex;	/* index into RcvBufferSpace[] for Blk A */
-	unsigned char RcvBIndex;	/* index into RcvBufferSpace[] for Blk B */
-
-	unsigned int
-	    TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
-	unsigned int
-	    RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
+	void	      *TxmBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_TXM_Q_SIZE];
+	void	      *RcvBuffer[LAN_SAA9730_BUFFERS][LAN_SAA9730_RCV_Q_SIZE];
 	unsigned int TxBufferFree[LAN_SAA9730_BUFFERS];
 
 	unsigned char PhysicalAddress[LAN_SAA9730_CAM_ENTRIES][6];
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index c91e2e81f13..28bf2e69eb5 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -155,6 +155,12 @@ MODULE_LICENSE("GPL");
 #define MEMORY_WAIT_TIME	16
 
 /*
+ * The maximum number of processing loops allowed for each call to the
+ * IRQ handler.  
+ */
+#define MAX_IRQ_LOOPS		8
+
+/*
  * This selects whether TX packets are sent one by one to the SMC91x internal
  * memory and throttled until transmission completes.  This may prevent
  * RX overruns a litle by keeping much of the memory free for RX packets
@@ -684,7 +690,6 @@ static void smc_hardware_send_pkt(unsigned long data)
 
 	/* queue the packet for TX */
 	SMC_SET_MMU_CMD(MC_ENQUEUE);
-	SMC_ACK_INT(IM_TX_EMPTY_INT);
 	smc_special_unlock(&lp->lock);
 
 	dev->trans_start = jiffies;
@@ -1207,6 +1212,7 @@ static void smc_phy_configure(void *data)
 	smc_phy_check_media(dev, 1);
 
 smc_phy_configure_exit:
+	SMC_SELECT_BANK(2);
 	spin_unlock_irq(&lp->lock);
 	lp->work_pending = 0;
 }
@@ -1305,7 +1311,7 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	SMC_SET_INT_MASK(0);
 
 	/* set a timeout value, so I don't stay here forever */
-	timeout = 8;
+	timeout = MAX_IRQ_LOOPS;
 
 	do {
 		status = SMC_GET_INT();
@@ -1372,10 +1378,13 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	/* restore register states */
 	SMC_SET_PTR(saved_pointer);
 	SMC_SET_INT_MASK(mask);
-
 	spin_unlock(&lp->lock);
 
-	DBG(3, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout);
+	if (timeout == MAX_IRQ_LOOPS)
+		PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
+		       dev->name, mask);
+	DBG(3, "%s: Interrupt done (%d loops)\n",
+	       dev->name, MAX_IRQ_LOOPS - timeout);
 
 	/*
 	 * We return IRQ_HANDLED unconditionally here even if there was
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index a01efa6d5c6..1fd04662c4f 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -192,7 +192,9 @@ static int cisco_rx(struct sk_buff *skb)
 					       "uptime %ud%uh%um%us)\n",
 					       dev->name, days, hrs,
 					       min, sec);
+#if 0
 					netif_carrier_on(dev);
+#endif
 					hdlc->state.cisco.up = 1;
 				}
 			}
@@ -225,7 +227,9 @@ static void cisco_timer(unsigned long arg)
 		       hdlc->state.cisco.settings.timeout * HZ)) {
 		hdlc->state.cisco.up = 0;
 		printk(KERN_INFO "%s: Link down\n", dev->name);
+#if 0
 		netif_carrier_off(dev);
+#endif
 	}
 
 	cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
@@ -261,8 +265,10 @@ static void cisco_stop(struct net_device *dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	del_timer_sync(&hdlc->state.cisco.timer);
+#if 0
 	if (netif_carrier_ok(dev))
 		netif_carrier_off(dev);
+#endif
 	hdlc->state.cisco.up = 0;
 	hdlc->state.cisco.request_sent = 0;
 }
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index e1601d35dce..523afe17564 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -545,8 +545,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
 
 	hdlc->state.fr.reliable = reliable;
 	if (reliable) {
+#if 0
 		if (!netif_carrier_ok(dev))
 			netif_carrier_on(dev);
+#endif
 
 		hdlc->state.fr.n391cnt = 0; /* Request full status */
 		hdlc->state.fr.dce_changed = 1;
@@ -560,8 +562,10 @@ static void fr_set_link_state(int reliable, struct net_device *dev)
 			}
 		}
 	} else {
+#if 0
 		if (netif_carrier_ok(dev))
 			netif_carrier_off(dev);
+#endif
 
 		while (pvc) {		/* Deactivate all PVCs */
 			pvc_carrier(0, pvc);
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index cdd4c09c2d9..46cef8f9213 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -79,11 +79,13 @@ static void __hdlc_set_carrier_on(struct net_device *dev)
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	if (hdlc->proto.start)
 		return hdlc->proto.start(dev);
+#if 0
 #ifdef DEBUG_LINK
 	if (netif_carrier_ok(dev))
 		printk(KERN_ERR "hdlc_set_carrier_on(): already on\n");
 #endif
 	netif_carrier_on(dev);
+#endif
 }
 
 
@@ -94,11 +96,13 @@ static void __hdlc_set_carrier_off(struct net_device *dev)
 	if (hdlc->proto.stop)
 		return hdlc->proto.stop(dev);
 
+#if 0
 #ifdef DEBUG_LINK
 	if (!netif_carrier_ok(dev))
 		printk(KERN_ERR "hdlc_set_carrier_off(): already off\n");
 #endif
 	netif_carrier_off(dev);
+#endif
 }
 
 
@@ -294,8 +298,10 @@ int register_hdlc_device(struct net_device *dev)
 	if (result != 0)
 		return -EIO;
 
+#if 0
 	if (netif_carrier_ok(dev))
 		netif_carrier_off(dev); /* no carrier until DCD goes up */
+#endif
 
 	return 0;
 }
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
index 579480dad37..346c6febb03 100644
--- a/drivers/net/wireless/hermes.c
+++ b/drivers/net/wireless/hermes.c
@@ -398,7 +398,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
  *
  * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
  */
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
 		     u16 id, u16 offset)
 {
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -424,7 +424,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
  *
  * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
  */
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
 		      u16 id, u16 offset)
 {
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
@@ -450,7 +450,7 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
  *
  * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
  */
-int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, unsigned len,
+int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf, unsigned data_len, int len,
 		      u16 id, u16 offset)
 {
 	int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
index a6bd472d75d..7644f72a9f4 100644
--- a/drivers/net/wireless/hermes.h
+++ b/drivers/net/wireless/hermes.h
@@ -372,12 +372,12 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
 		      struct hermes_response *resp);
 int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
 
-int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len,
 		       u16 id, u16 offset);
-int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len,
 			u16 id, u16 offset);
 int hermes_bap_pwrite_pad(hermes_t *hw, int bap, const void *buf,
-			unsigned data_len, unsigned len, u16 id, u16 offset);
+			unsigned data_len, int len, u16 id, u16 offset);
 int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
 		    u16 *length, void *buf);
 int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h
index 33acb8add4d..afac5c7a323 100644
--- a/drivers/net/wireless/i82593.h
+++ b/drivers/net/wireless/i82593.h
@@ -7,11 +7,16 @@
  *
  * Copyright 1994, Anders Klemets <klemets@it.kth.se>
  *
- * This software may be freely distributed for noncommercial purposes
- * as long as this notice is retained.
- * 
  * HISTORY
  * i82593.h,v
+ * Revision 1.4  2005/11/4  09:15:00  baroniunas
+ * Modified copyright with permission of author as follows:
+ *
+ *   "If I82539.H is the only file with my copyright statement
+ *    that is included in the Source Forge project, then you have
+ *    my approval to change the copyright statement to be a GPL
+ *    license, in the way you proposed on October 10."
+ *
  * Revision 1.1  1996/07/17 15:23:12  root
  * Initial revision
  *
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index a2e6214169e..77d2a21d4cd 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -6344,7 +6344,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
 	dev->ethtool_ops = &ipw2100_ethtool_ops;
 	dev->tx_timeout = ipw2100_tx_timeout;
 	dev->wireless_handlers = &ipw2100_wx_handler_def;
-	dev->get_wireless_stats = ipw2100_wx_wireless_stats;
+	priv->wireless_data.ieee80211 = priv->ieee;
+	dev->wireless_data = &priv->wireless_data;
 	dev->set_mac_address = ipw2100_set_address;
 	dev->watchdog_timeo = 3 * HZ;
 	dev->irq = 0;
@@ -7178,6 +7179,11 @@ static int ipw2100_wx_get_range(struct net_device *dev,
 	}
 	range->num_frequency = val;
 
+	/* Event capability (kernel + driver) */
+	range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
+				IW_EVENT_CAPA_MASK(SIOCGIWAP));
+	range->event_capa[1] = IW_EVENT_CAPA_K_1;
+
 	IPW_DEBUG_WX("GET Range\n");
 
 	return 0;
@@ -8446,16 +8452,6 @@ static iw_handler ipw2100_private_handler[] = {
 #endif				/* CONFIG_IPW2100_MONITOR */
 };
 
-static struct iw_handler_def ipw2100_wx_handler_def = {
-	.standard = ipw2100_wx_handlers,
-	.num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
-	.num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
-	.num_private_args = sizeof(ipw2100_private_args) /
-	    sizeof(struct iw_priv_args),
-	.private = (iw_handler *) ipw2100_private_handler,
-	.private_args = (struct iw_priv_args *)ipw2100_private_args,
-};
-
 /*
  * Get wireless statistics.
  * Called by /proc/net/wireless
@@ -8597,6 +8593,17 @@ static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
 	return (struct iw_statistics *)NULL;
 }
 
+static struct iw_handler_def ipw2100_wx_handler_def = {
+	.standard = ipw2100_wx_handlers,
+	.num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
+	.num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
+	.num_private_args = sizeof(ipw2100_private_args) /
+	    sizeof(struct iw_priv_args),
+	.private = (iw_handler *) ipw2100_private_handler,
+	.private_args = (struct iw_priv_args *)ipw2100_private_args,
+	.get_wireless_stats = ipw2100_wx_wireless_stats,
+};
+
 static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
 {
 	union iwreq_data wrqu;
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
index 140fdf2a0a0..7c65b10bb16 100644
--- a/drivers/net/wireless/ipw2100.h
+++ b/drivers/net/wireless/ipw2100.h
@@ -571,6 +571,8 @@ struct ipw2100_priv {
 	struct net_device *net_dev;
 	struct iw_statistics wstats;
 
+	struct iw_public_data wireless_data;
+
 	struct tasklet_struct irq_tasklet;
 
 	struct workqueue_struct *workqueue;
diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c
index 109a96d9000..23deee69974 100644
--- a/drivers/net/wireless/prism54/isl_38xx.c
+++ b/drivers/net/wireless/prism54/isl_38xx.c
@@ -164,12 +164,12 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base)
 		/* assert the Wakeup interrupt in the Device Interrupt Register */
 		isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
 				  ISL38XX_DEV_INT_REG);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
 		udelay(ISL38XX_WRITEIO_DELAY);
 
 		/* perform another read on the Device Status Register */
 		reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
-
-#if VERBOSE > SHOW_ERROR_MESSAGES
 		do_gettimeofday(&current_time);
 		DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
 		      current_time.tv_sec, (long)current_time.tv_usec, reg);
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index a39fbfef789..19657efa8dc 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -700,6 +700,28 @@ static unsigned int iosapic_startup_irq(unsigned int irq)
 	return 0;
 }
 
+#ifdef CONFIG_SMP
+static void iosapic_set_affinity_irq(unsigned int irq, cpumask_t dest)
+{
+	struct vector_info *vi = iosapic_get_vector(irq);
+	u32 d0, d1, dummy_d0;
+	unsigned long flags;
+
+	if (cpu_check_affinity(irq, &dest))
+		return;
+
+	vi->txn_addr = txn_affinity_addr(irq, first_cpu(dest));
+
+	spin_lock_irqsave(&iosapic_lock, flags);
+	/* d1 contains the destination CPU, so only want to set that
+	 * entry */
+	iosapic_rd_irt_entry(vi, &d0, &d1);
+	iosapic_set_irt_data(vi, &dummy_d0, &d1);
+	iosapic_wr_irt_entry(vi, d0, d1);
+	spin_unlock_irqrestore(&iosapic_lock, flags);
+}
+#endif
+
 static struct hw_interrupt_type iosapic_interrupt_type = {
 	.typename =	"IO-SAPIC-level",
 	.startup =	iosapic_startup_irq,
@@ -708,7 +730,9 @@ static struct hw_interrupt_type iosapic_interrupt_type = {
 	.disable =	iosapic_disable_irq,
 	.ack =		no_ack_irq,
 	.end =		iosapic_end_irq,
-//	.set_affinity =	iosapic_set_affinity_irq,
+#ifdef CONFIG_SMP
+	.set_affinity =	iosapic_set_affinity_irq,
+#endif
 };
 
 int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev)
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index bab3bcabcb6..d14888e149b 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -24,6 +24,9 @@
  *      Major changes to get basic interrupt infrastructure working to
  *      hopefully be able to support all SuperIO devices. Currently
  *      works with serial. -- John Marvin <jsm@fc.hp.com>
+ *
+ *	Converted superio_init() to be a PCI_FIXUP_FINAL callee.
+ *         -- Kyle McMartin <kyle@parisc-linux.org>
  */
 
 
@@ -141,10 +144,10 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
 }
 
 /* Initialize Super I/O device */
-
-static void __devinit
-superio_init(struct superio_device *sio)
+static void
+superio_init(struct pci_dev *pcidev)
 {
+	struct superio_device *sio = &sio_dev;
 	struct pci_dev *pdev = sio->lio_pdev;
 	u16 word;
 
@@ -160,8 +163,8 @@ superio_init(struct superio_device *sio)
 	/* ...then properly fixup the USB to point at suckyio PIC */
 	sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
 
-	printk (KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
-		pci_name(pdev),pdev->irq);
+	printk(KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+	       pci_name(pdev), pdev->irq);
 
 	pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
 	sio->sp1_base &= ~1;
@@ -274,7 +277,7 @@ superio_init(struct superio_device *sio)
 
 	sio->suckyio_irq_enabled = 1;
 }
-
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
 
 static void superio_disable_irq(unsigned int irq)
 {
@@ -452,8 +455,10 @@ static void superio_fixup_pci(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
 
 
-static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit
+superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	struct superio_device *sio = &sio_dev;
 
 	/*
 	** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a
@@ -466,7 +471,8 @@ static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_
 		dev->subsystem_vendor, dev->subsystem_device,
 		dev->class);
 
-	superio_init(&sio_dev);
+	if (!sio->suckyio_irq_enabled)
+		BUG(); /* Enabled by PCI_FIXUP_FINAL */
 
 	if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) {	/* Function 1 */
 		superio_parport_init();
@@ -481,19 +487,21 @@ static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_
 		DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n");
 	}
 
-	/* Let appropriate other driver claim this device. */ 
+	/* Let appropriate other driver claim this device. */
 	return -ENODEV;
 }
 
 static struct pci_device_id superio_tbl[] = {
-	{ PCI_VENDOR_ID_NS, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
 	{ 0, }
 };
 
 static struct pci_driver superio_driver = {
-	.name =		"SuperIO",
-	.id_table =	superio_tbl,
-	.probe =	superio_probe,
+	.name =         "SuperIO",
+	.id_table =     superio_tbl,
+	.probe =        superio_probe,
 };
 
 static int __init superio_modinit(void)
@@ -506,6 +514,5 @@ static void __exit superio_exit(void)
 	pci_unregister_driver(&superio_driver);
 }
 
-
 module_init(superio_modinit);
 module_exit(superio_exit);
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index e1960d69fb9..4cb1f3ed910 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -784,8 +784,8 @@ static ide_proc_entry_t idescsi_proc[] = {
 #endif
 
 static ide_driver_t idescsi_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-scsi",
 		.bus		= &ide_bus_type,
 		.probe		= ide_scsi_probe,
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ac184e60797..ab7432a5778 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -2,6 +2,7 @@
  * sata_mv.c - Marvell SATA support
  *
  * Copyright 2005: EMC Corporation, all rights reserved.
+ * Copyright 2005 Red Hat, Inc.  All rights reserved.
  *
  * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
  *
@@ -36,7 +37,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.25"
+#define DRV_VERSION	"0.5"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index cb1933a3bd5..e0d6f194f54 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -5,17 +5,6 @@
  *
  * Based on preview driver from Silicon Image.
  *
- * NOTE: No NCQ/ATAPI support yet.  The preview driver didn't support
- * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
- * those work.  Enabling those shouldn't be difficult.  Basic
- * structure is all there (in libata-dev tree).  If you have any
- * information about this hardware, please contact me or linux-ide.
- * Info is needed on...
- *
- * - How to issue tagged commands and turn on sactive on issue accordingly.
- * - Where to put an ATAPI command and how to tell the device to send it.
- * - How to enable/use 64bit.
- *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
@@ -42,7 +31,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.22"	/* Silicon Image's preview driver was 0.10 */
+#define DRV_VERSION	"0.23"
 
 /*
  * Port request block (PRB) 32 bytes
@@ -221,11 +210,22 @@ enum {
 	IRQ_STAT_4PORTS		= 0xf,
 };
 
-struct sil24_cmd_block {
+struct sil24_ata_block {
 	struct sil24_prb prb;
 	struct sil24_sge sge[LIBATA_MAX_PRD];
 };
 
+struct sil24_atapi_block {
+	struct sil24_prb prb;
+	u8 cdb[16];
+	struct sil24_sge sge[LIBATA_MAX_PRD - 1];
+};
+
+union sil24_cmd_block {
+	struct sil24_ata_block ata;
+	struct sil24_atapi_block atapi;
+};
+
 /*
  * ap->private_data
  *
@@ -233,7 +233,7 @@ struct sil24_cmd_block {
  * here from the previous interrupt.
  */
 struct sil24_port_priv {
-	struct sil24_cmd_block *cmd_block;	/* 32 cmd blocks */
+	union sil24_cmd_block *cmd_block;	/* 32 cmd blocks */
 	dma_addr_t cmd_block_dma;		/* DMA base addr for them */
 	struct ata_taskfile tf;			/* Cached taskfile registers */
 };
@@ -244,6 +244,7 @@ struct sil24_host_priv {
 	void __iomem *port_base;	/* port registers (4 * 8192 bytes @BAR2) */
 };
 
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
 static u8 sil24_check_status(struct ata_port *ap);
 static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
 static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@@ -297,6 +298,8 @@ static struct scsi_host_template sil24_sht = {
 static const struct ata_port_operations sil24_ops = {
 	.port_disable		= ata_port_disable,
 
+	.dev_config		= sil24_dev_config,
+
 	.check_status		= sil24_check_status,
 	.check_altstatus	= sil24_check_status,
 	.dev_select		= ata_noop_dev_select,
@@ -333,7 +336,7 @@ static struct ata_port_info sil24_port_info[] = {
 	{
 		.sht		= &sil24_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -344,7 +347,7 @@ static struct ata_port_info sil24_port_info[] = {
 	{
 		.sht		= &sil24_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -355,7 +358,7 @@ static struct ata_port_info sil24_port_info[] = {
 	{
 		.sht		= &sil24_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -364,6 +367,16 @@ static struct ata_port_info sil24_port_info[] = {
 	},
 };
 
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+
+	if (ap->cdb_len == 16)
+		writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
+	else
+		writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
+}
+
 static inline void sil24_update_tf(struct ata_port *ap)
 {
 	struct sil24_port_priv *pp = ap->private_data;
@@ -415,22 +428,73 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	*tf = pp->tf;
 }
 
-static void sil24_phy_reset(struct ata_port *ap)
+static int sil24_issue_SRST(struct ata_port *ap)
 {
-	__sata_phy_reset(ap);
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+	struct sil24_port_priv *pp = ap->private_data;
+	struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
+	dma_addr_t paddr = pp->cmd_block_dma;
+	u32 irq_enable, irq_stat;
+	int cnt;
+
+	/* temporarily turn off IRQs during SRST */
+	irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
+	writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
+
 	/*
-	 * No ATAPI yet.  Just unconditionally indicate ATA device.
-	 * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
-	 * and libata core will ignore the device.
+	 * XXX: Not sure whether the following sleep is needed or not.
+	 * The original driver had it.  So....
 	 */
-	if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
-		ap->device[0].class = ATA_DEV_ATA;
+	msleep(10);
+
+	prb->ctrl = PRB_CTRL_SRST;
+	prb->fis[1] = 0; /* no PM yet */
+
+	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+
+	for (cnt = 0; cnt < 100; cnt++) {
+		irq_stat = readl(port + PORT_IRQ_STAT);
+		writel(irq_stat, port + PORT_IRQ_STAT);		/* clear irq */
+
+		irq_stat >>= PORT_IRQ_RAW_SHIFT;
+		if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
+			break;
+
+		msleep(1);
+	}
+
+	/* restore IRQs */
+	writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
+
+	if (!(irq_stat & PORT_IRQ_COMPLETE))
+		return -1;
+
+	/* update TF */
+	sil24_update_tf(ap);
+	return 0;
+}
+
+static void sil24_phy_reset(struct ata_port *ap)
+{
+	struct sil24_port_priv *pp = ap->private_data;
+
+	__sata_phy_reset(ap);
+	if (ap->flags & ATA_FLAG_PORT_DISABLED)
+		return;
+
+	if (sil24_issue_SRST(ap) < 0) {
+		printk(KERN_ERR DRV_NAME
+		       " ata%u: SRST failed, disabling port\n", ap->id);
+		ap->ops->port_disable(ap);
+		return;
+	}
+
+	ap->device->class = ata_dev_classify(&pp->tf);
 }
 
 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
-				 struct sil24_cmd_block *cb)
+				 struct sil24_sge *sge)
 {
-	struct sil24_sge *sge = cb->sge;
 	struct scatterlist *sg;
 	unsigned int idx = 0;
 
@@ -451,23 +515,47 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct sil24_port_priv *pp = ap->private_data;
-	struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
-	struct sil24_prb *prb = &cb->prb;
+	union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+	struct sil24_prb *prb;
+	struct sil24_sge *sge;
 
 	switch (qc->tf.protocol) {
 	case ATA_PROT_PIO:
 	case ATA_PROT_DMA:
 	case ATA_PROT_NODATA:
+		prb = &cb->ata.prb;
+		sge = cb->ata.sge;
+		prb->ctrl = 0;
+		break;
+
+	case ATA_PROT_ATAPI:
+	case ATA_PROT_ATAPI_DMA:
+	case ATA_PROT_ATAPI_NODATA:
+		prb = &cb->atapi.prb;
+		sge = cb->atapi.sge;
+		memset(cb->atapi.cdb, 0, 32);
+		memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
+
+		if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
+			if (qc->tf.flags & ATA_TFLAG_WRITE)
+				prb->ctrl = PRB_CTRL_PACKET_WRITE;
+			else
+				prb->ctrl = PRB_CTRL_PACKET_READ;
+		} else
+			prb->ctrl = 0;
+
 		break;
+
 	default:
-		/* ATAPI isn't supported yet */
+		prb = NULL;	/* shut up, gcc */
+		sge = NULL;
 		BUG();
 	}
 
 	ata_tf_to_fis(&qc->tf, prb->fis, 0);
 
 	if (qc->flags & ATA_QCFLAG_DMAMAP)
-		sil24_fill_sg(qc, cb);
+		sil24_fill_sg(qc, sge);
 }
 
 static int sil24_qc_issue(struct ata_queued_cmd *qc)
@@ -486,6 +574,31 @@ static void sil24_irq_clear(struct ata_port *ap)
 	/* unused */
 }
 
+static int __sil24_restart_controller(void __iomem *port)
+{
+	u32 tmp;
+	int cnt;
+
+	writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+
+	/* Max ~10ms */
+	for (cnt = 0; cnt < 10000; cnt++) {
+		tmp = readl(port + PORT_CTRL_STAT);
+		if (tmp & PORT_CS_RDY)
+			return 0;
+		udelay(1);
+	}
+
+	return -1;
+}
+
+static void sil24_restart_controller(struct ata_port *ap)
+{
+	if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
+		printk(KERN_ERR DRV_NAME
+		       " ata%u: failed to restart controller\n", ap->id);
+}
+
 static int __sil24_reset_controller(void __iomem *port)
 {
 	int cnt;
@@ -505,7 +618,11 @@ static int __sil24_reset_controller(void __iomem *port)
 
 	if (tmp & PORT_CS_DEV_RST)
 		return -1;
-	return 0;
+
+	if (tmp & PORT_CS_RDY)
+		return 0;
+
+	return __sil24_restart_controller(port);
 }
 
 static void sil24_reset_controller(struct ata_port *ap)
@@ -567,9 +684,15 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
 	if (serror)
 		writel(serror, port + PORT_SERROR);
 
-	printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
-	       "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
-	       ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+	/*
+	 * Don't log ATAPI device errors.  They're supposed to happen
+	 * and any serious errors will be logged using sense data by
+	 * the SCSI layer.
+	 */
+	if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
+		printk("ata%u: error interrupt on port%d\n"
+		       "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+		       ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
 
 	if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
 		/*
@@ -577,6 +700,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
 		 */
 		sil24_update_tf(ap);
 		err_mask = ac_err_mask(pp->tf.command);
+		sil24_restart_controller(ap);
 	} else {
 		/*
 		 * Other errors.  libata currently doesn't have any
@@ -584,12 +708,11 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
 		 * ATA_ERR.
 		 */
 		err_mask = AC_ERR_OTHER;
+		sil24_reset_controller(ap);
 	}
 
 	if (qc)
 		ata_qc_complete(qc, err_mask);
-
-	sil24_reset_controller(ap);
 }
 
 static inline void sil24_host_intr(struct ata_port *ap)
@@ -665,7 +788,7 @@ static int sil24_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host_set->dev;
 	struct sil24_port_priv *pp;
-	struct sil24_cmd_block *cb;
+	union sil24_cmd_block *cb;
 	size_t cb_size = sizeof(*cb);
 	dma_addr_t cb_dma;
 	int rc = -ENOMEM;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index ff36f0c9fda..ad47c1b84c3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -507,7 +507,7 @@ config SERIAL_SUNSU_CONSOLE
 
 config SERIAL_MUX
 	tristate "Serial MUX support"
-	depends on PARISC
+	depends on GSC
 	select SERIAL_CORE
 	default y
 	---help---
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 938d185841c..89d7bd3eaee 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -49,7 +49,6 @@
 #include <linux/serial.h>
 
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/hardware/amba.h>
 #include <asm/hardware/clock.h>
@@ -63,7 +62,8 @@
 
 #define AMBA_ISR_PASS_LIMIT	256
 
-#define UART_DUMMY_RSR_RX	256
+#define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
+#define UART_DUMMY_DR_RX	(1 << 16)
 
 /*
  * We wrap our port structure around the generic uart_port.
@@ -116,7 +116,7 @@ pl011_rx_chars(struct uart_amba_port *uap)
 #endif
 {
 	struct tty_struct *tty = uap->port.info->tty;
-	unsigned int status, ch, flag, rsr, max_count = 256;
+	unsigned int status, ch, flag, max_count = 256;
 
 	status = readw(uap->port.membase + UART01x_FR);
 	while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
@@ -129,7 +129,7 @@ pl011_rx_chars(struct uart_amba_port *uap)
 			 */
 		}
 
-		ch = readw(uap->port.membase + UART01x_DR);
+		ch = readw(uap->port.membase + UART01x_DR) | UART_DUMMY_DR_RX;
 		flag = TTY_NORMAL;
 		uap->port.icount.rx++;
 
@@ -137,34 +137,33 @@ pl011_rx_chars(struct uart_amba_port *uap)
 		 * Note that the error handling code is
 		 * out of the main execution path
 		 */
-		rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-		if (unlikely(rsr & UART01x_RSR_ANY)) {
-			if (rsr & UART01x_RSR_BE) {
-				rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+		if (unlikely(ch & UART_DR_ERROR)) {
+			if (ch & UART011_DR_BE) {
+				ch &= ~(UART011_DR_FE | UART011_DR_PE);
 				uap->port.icount.brk++;
 				if (uart_handle_break(&uap->port))
 					goto ignore_char;
-			} else if (rsr & UART01x_RSR_PE)
+			} else if (ch & UART011_DR_PE)
 				uap->port.icount.parity++;
-			else if (rsr & UART01x_RSR_FE)
+			else if (ch & UART011_DR_FE)
 				uap->port.icount.frame++;
-			if (rsr & UART01x_RSR_OE)
+			if (ch & UART011_DR_OE)
 				uap->port.icount.overrun++;
 
-			rsr &= uap->port.read_status_mask;
+			ch &= uap->port.read_status_mask;
 
-			if (rsr & UART01x_RSR_BE)
+			if (ch & UART011_DR_BE)
 				flag = TTY_BREAK;
-			else if (rsr & UART01x_RSR_PE)
+			else if (ch & UART011_DR_PE)
 				flag = TTY_PARITY;
-			else if (rsr & UART01x_RSR_FE)
+			else if (ch & UART011_DR_FE)
 				flag = TTY_FRAME;
 		}
 
 		if (uart_handle_sysrq_char(&uap->port, ch, regs))
 			goto ignore_char;
 
-		uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+		uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
 
 	ignore_char:
 		status = readw(uap->port.membase + UART01x_FR);
@@ -476,33 +475,33 @@ pl011_set_termios(struct uart_port *port, struct termios *termios,
 	 */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	port->read_status_mask = UART01x_RSR_OE;
+	port->read_status_mask = UART011_DR_OE | 255;
 	if (termios->c_iflag & INPCK)
-		port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+		port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
 	if (termios->c_iflag & (BRKINT | PARMRK))
-		port->read_status_mask |= UART01x_RSR_BE;
+		port->read_status_mask |= UART011_DR_BE;
 
 	/*
 	 * Characters to ignore
 	 */
 	port->ignore_status_mask = 0;
 	if (termios->c_iflag & IGNPAR)
-		port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+		port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
 	if (termios->c_iflag & IGNBRK) {
-		port->ignore_status_mask |= UART01x_RSR_BE;
+		port->ignore_status_mask |= UART011_DR_BE;
 		/*
 		 * If we're ignoring parity and break indicators,
 		 * ignore overruns too (for real raw support).
 		 */
 		if (termios->c_iflag & IGNPAR)
-			port->ignore_status_mask |= UART01x_RSR_OE;
+			port->ignore_status_mask |= UART011_DR_OE;
 	}
 
 	/*
 	 * Ignore all characters if CREAD is not set.
 	 */
 	if ((termios->c_cflag & CREAD) == 0)
-		port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+		port->ignore_status_mask |= UART_DUMMY_DR_RX;
 
 	if (UART_ENABLE_MS(port, termios->c_cflag))
 		pl011_enable_ms(port);
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 660bae5ba17..7633132a10a 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -65,8 +65,8 @@ static struct uart_driver mux_driver = {
 
 static struct timer_list mux_timer;
 
-#define UART_PUT_CHAR(p, c) __raw_writel((c), (unsigned long)(p)->membase + IO_DATA_REG_OFFSET)
-#define UART_GET_FIFO_CNT(p) __raw_readl((unsigned long)(p)->membase + IO_DCOUNT_REG_OFFSET)
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET)
+#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET)
 #define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8
 
 /**
@@ -79,10 +79,7 @@ static struct timer_list mux_timer;
  */
 static unsigned int mux_tx_empty(struct uart_port *port)
 {
-	unsigned int cnt = __raw_readl((unsigned long)port->membase 
-				+ IO_DCOUNT_REG_OFFSET);
-
-	return cnt ? 0 : TIOCSER_TEMT;
+	return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT;
 } 
 
 /**
@@ -218,8 +215,7 @@ static void mux_read(struct uart_port *port)
 	__u32 start_count = port->icount.rx;
 
 	while(1) {
-		data = __raw_readl((unsigned long)port->membase
-						+ IO_DATA_REG_OFFSET);
+		data = __raw_readl(port->membase + IO_DATA_REG_OFFSET);
 
 		if (MUX_STATUS(data))
 			continue;
@@ -481,6 +477,13 @@ static int __init mux_probe(struct parisc_device *dev)
 		port->ops	= &mux_pops;
 		port->flags	= UPF_BOOT_AUTOCONF;
 		port->line	= port_cnt;
+
+		/* The port->timeout needs to match what is present in
+		 * uart_wait_until_sent in serial_core.c.  Otherwise
+		 * the time spent in msleep_interruptable will be very
+		 * long, causing the appearance of a console hang.
+		 */
+		port->timeout   = HZ / 50;
 		spin_lock_init(&port->lock);
 		status = uart_add_one_port(&mux_driver, port);
 		BUG_ON(status);
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 0e3daf6d7b5..25a086458ab 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -161,7 +161,6 @@ static void sa1100_stop_tx(struct uart_port *port)
 static void sa1100_start_tx(struct uart_port *port)
 {
 	struct sa1100_port *sport = (struct sa1100_port *)port;
-	unsigned long flags;
 	u32 utcr3;
 
 	utcr3 = UART_GET_UTCR3(sport);