summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@g5.osdl.org>2005-10-28 21:08:14 -0700
committerLinus Torvalds <torvalds@g5.osdl.org>2005-10-28 21:08:14 -0700
commit1f419cadff55f548e7356ffebdb9e1b5a8c22275 (patch)
tree07c04d053322e9913a6b445b2fe00510299e97cf /drivers
parent974f7bc5781d3fc16e32d8908c6e48592e767dd2 (diff)
parent4303fc6f055cf1a7ec63c3c3fd777b91b7d576f1 (diff)
downloadkernel-crypto-1f419cadff55f548e7356ffebdb9e1b5a8c22275.tar.gz
kernel-crypto-1f419cadff55f548e7356ffebdb9e1b5a8c22275.tar.xz
kernel-crypto-1f419cadff55f548e7356ffebdb9e1b5a8c22275.zip
Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/base/power/main.c26
-rw-r--r--drivers/base/power/power.h13
-rw-r--r--drivers/base/power/runtime.c1
-rw-r--r--drivers/block/ub.c4
-rw-r--r--drivers/pci/quirks.c253
-rw-r--r--drivers/usb/Makefile2
-rw-r--r--drivers/usb/class/Kconfig23
-rw-r--r--drivers/usb/class/Makefile1
-rw-r--r--drivers/usb/class/bluetty.c1279
-rw-r--r--drivers/usb/class/cdc-acm.c5
-rw-r--r--drivers/usb/class/usblp.c3
-rw-r--r--drivers/usb/core/Kconfig11
-rw-r--r--drivers/usb/core/Makefile2
-rw-r--r--drivers/usb/core/config.c22
-rw-r--r--drivers/usb/core/devio.c190
-rw-r--r--drivers/usb/core/file.c19
-rw-r--r--drivers/usb/core/hcd-pci.c106
-rw-r--r--drivers/usb/core/hcd.c151
-rw-r--r--drivers/usb/core/hcd.h69
-rw-r--r--drivers/usb/core/hub.c410
-rw-r--r--drivers/usb/core/hub.h2
-rw-r--r--drivers/usb/core/inode.c44
-rw-r--r--drivers/usb/core/message.c88
-rw-r--r--drivers/usb/core/notify.c120
-rw-r--r--drivers/usb/core/sysfs.c319
-rw-r--r--drivers/usb/core/urb.c3
-rw-r--r--drivers/usb/core/usb.c165
-rw-r--r--drivers/usb/core/usb.h33
-rw-r--r--drivers/usb/gadget/dummy_hcd.c24
-rw-r--r--drivers/usb/gadget/ether.c1
-rw-r--r--drivers/usb/gadget/file_storage.c52
-rw-r--r--drivers/usb/gadget/goku_udc.c1
-rw-r--r--drivers/usb/gadget/lh7a40x_udc.c1
-rw-r--r--drivers/usb/gadget/net2280.c1
-rw-r--r--drivers/usb/gadget/omap_udc.c13
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c1
-rw-r--r--drivers/usb/gadget/zero.c1
-rw-r--r--drivers/usb/host/Makefile5
-rw-r--r--drivers/usb/host/ehci-hcd.c543
-rw-r--r--drivers/usb/host/ehci-hub.c8
-rw-r--r--drivers/usb/host/ehci-pci.c415
-rw-r--r--drivers/usb/host/ehci.h1
-rw-r--r--drivers/usb/host/isp116x-hcd.c41
-rw-r--r--drivers/usb/host/isp116x.h1
-rw-r--r--drivers/usb/host/ohci-au1xxx.c6
-rw-r--r--drivers/usb/host/ohci-dbg.c4
-rw-r--r--drivers/usb/host/ohci-hcd.c4
-rw-r--r--drivers/usb/host/ohci-hub.c52
-rw-r--r--drivers/usb/host/ohci-lh7a404.c6
-rw-r--r--drivers/usb/host/ohci-mem.c1
-rw-r--r--drivers/usb/host/ohci-omap.c45
-rw-r--r--drivers/usb/host/ohci-pci.c47
-rw-r--r--drivers/usb/host/ohci-ppc-soc.c9
-rw-r--r--drivers/usb/host/ohci-pxa27x.c7
-rw-r--r--drivers/usb/host/ohci-s3c2410.c9
-rw-r--r--drivers/usb/host/ohci-sa1111.c7
-rw-r--r--drivers/usb/host/ohci.h1
-rw-r--r--drivers/usb/host/pci-quirks.c296
-rw-r--r--drivers/usb/host/sl811-hcd.c17
-rw-r--r--drivers/usb/host/uhci-debug.c5
-rw-r--r--drivers/usb/host/uhci-hcd.c178
-rw-r--r--drivers/usb/host/uhci-hcd.h98
-rw-r--r--drivers/usb/host/uhci-q.c62
-rw-r--r--drivers/usb/image/mdc800.c33
-rw-r--r--drivers/usb/image/microtek.c3
-rw-r--r--drivers/usb/input/aiptek.c2
-rw-r--r--drivers/usb/input/hid-core.c5
-rw-r--r--drivers/usb/input/hiddev.c3
-rw-r--r--drivers/usb/input/map_to_7segment.h2
-rw-r--r--drivers/usb/input/touchkitusb.c2
-rw-r--r--drivers/usb/media/dabusb.c3
-rw-r--r--drivers/usb/misc/auerswald.c3
-rw-r--r--drivers/usb/misc/idmouse.c5
-rw-r--r--drivers/usb/misc/legousbtower.c5
-rw-r--r--drivers/usb/misc/rio500.c3
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c7
-rw-r--r--drivers/usb/misc/usblcd.c9
-rw-r--r--drivers/usb/misc/usbtest.c11
-rw-r--r--drivers/usb/mon/mon_main.c23
-rw-r--r--drivers/usb/net/Kconfig2
-rw-r--r--drivers/usb/net/kaweth.c2
-rw-r--r--drivers/usb/net/pegasus.c2
-rw-r--r--drivers/usb/net/pegasus.h2
-rw-r--r--drivers/usb/net/rtl8150.c1
-rw-r--r--drivers/usb/net/usbnet.c2
-rw-r--r--drivers/usb/serial/ChangeLog.old730
-rw-r--r--drivers/usb/serial/Kconfig9
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/airprime.c8
-rw-r--r--drivers/usb/serial/belkin_sa.c10
-rw-r--r--drivers/usb/serial/bus.c37
-rw-r--r--drivers/usb/serial/cp2101.c10
-rw-r--r--drivers/usb/serial/cyberjack.c10
-rw-r--r--drivers/usb/serial/cypress_m8.c20
-rw-r--r--drivers/usb/serial/digi_acceleport.c20
-rw-r--r--drivers/usb/serial/empeg.c8
-rw-r--r--drivers/usb/serial/ftdi_sio.c16
-rw-r--r--drivers/usb/serial/ftdi_sio.h16
-rw-r--r--drivers/usb/serial/garmin_gps.c15
-rw-r--r--drivers/usb/serial/generic.c9
-rw-r--r--drivers/usb/serial/hp4x.c10
-rw-r--r--drivers/usb/serial/io_edgeport.c219
-rw-r--r--drivers/usb/serial/io_tables.h30
-rw-r--r--drivers/usb/serial/io_ti.c20
-rw-r--r--drivers/usb/serial/ipaq.c247
-rw-r--r--drivers/usb/serial/ipw.c10
-rw-r--r--drivers/usb/serial/ir-usb.c9
-rw-r--r--drivers/usb/serial/keyspan.h40
-rw-r--r--drivers/usb/serial/keyspan_pda.c30
-rw-r--r--drivers/usb/serial/kl5kusb105.c10
-rw-r--r--drivers/usb/serial/kobil_sct.c9
-rw-r--r--drivers/usb/serial/mct_u232.c10
-rw-r--r--drivers/usb/serial/nokia_dku2.c142
-rw-r--r--drivers/usb/serial/omninet.c10
-rw-r--r--drivers/usb/serial/option.c10
-rw-r--r--drivers/usb/serial/pl2303.c35
-rw-r--r--drivers/usb/serial/safe_serial.c10
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c18
-rw-r--r--drivers/usb/serial/usb-serial.c378
-rw-r--r--drivers/usb/serial/usb-serial.h81
-rw-r--r--drivers/usb/serial/visor.c170
-rw-r--r--drivers/usb/serial/whiteheat.c42
-rw-r--r--drivers/usb/storage/Kconfig3
-rw-r--r--drivers/usb/storage/shuttle_usbat.c314
-rw-r--r--drivers/usb/storage/shuttle_usbat.h66
-rw-r--r--drivers/usb/storage/transport.c6
-rw-r--r--drivers/usb/storage/transport.h2
-rw-r--r--drivers/usb/storage/unusual_devs.h44
-rw-r--r--drivers/usb/storage/usb.c163
-rw-r--r--drivers/usb/storage/usb.h5
-rw-r--r--drivers/usb/usb-skeleton.c3
132 files changed, 4027 insertions, 4497 deletions
diff --git a/drivers/Makefile b/drivers/Makefile
index 1a109a6dd95..65670be6ff1 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -5,7 +5,7 @@
# Rewritten to use lists instead of if-statements.
#
-obj-$(CONFIG_PCI) += pci/
+obj-$(CONFIG_PCI) += pci/ usb/
obj-$(CONFIG_PARISC) += parisc/
obj-y += video/
obj-$(CONFIG_ACPI) += acpi/
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 15e6a8f951f..0d2e101e4f1 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -30,23 +30,6 @@ LIST_HEAD(dpm_off_irq);
DECLARE_MUTEX(dpm_sem);
DECLARE_MUTEX(dpm_list_sem);
-/*
- * PM Reference Counting.
- */
-
-static inline void device_pm_hold(struct device * dev)
-{
- if (dev)
- atomic_inc(&dev->power.pm_users);
-}
-
-static inline void device_pm_release(struct device * dev)
-{
- if (dev)
- atomic_dec(&dev->power.pm_users);
-}
-
-
/**
* device_pm_set_parent - Specify power dependency.
* @dev: Device who needs power.
@@ -62,10 +45,8 @@ static inline void device_pm_release(struct device * dev)
void device_pm_set_parent(struct device * dev, struct device * parent)
{
- struct device * old_parent = dev->power.pm_parent;
- device_pm_release(old_parent);
- dev->power.pm_parent = parent;
- device_pm_hold(parent);
+ put_device(dev->power.pm_parent);
+ dev->power.pm_parent = get_device(parent);
}
EXPORT_SYMBOL_GPL(device_pm_set_parent);
@@ -75,7 +56,6 @@ int device_pm_add(struct device * dev)
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
- atomic_set(&dev->power.pm_users, 0);
down(&dpm_list_sem);
list_add_tail(&dev->power.entry, &dpm_active);
device_pm_set_parent(dev, dev->parent);
@@ -91,7 +71,7 @@ void device_pm_remove(struct device * dev)
dev->bus ? dev->bus->name : "No Bus", dev->kobj.name);
down(&dpm_list_sem);
dpm_sysfs_remove(dev);
- device_pm_release(dev->power.pm_parent);
+ put_device(dev->power.pm_parent);
list_del_init(&dev->power.entry);
up(&dpm_list_sem);
}
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index 2e700d795cf..fb3d35a9e10 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -67,9 +67,6 @@ extern int suspend_device(struct device *, pm_message_t);
* runtime.c
*/
-extern int dpm_runtime_suspend(struct device *, pm_message_t);
-extern void dpm_runtime_resume(struct device *);
-
#else /* CONFIG_PM */
@@ -82,14 +79,4 @@ static inline void device_pm_remove(struct device * dev)
}
-static inline int dpm_runtime_suspend(struct device * dev, pm_message_t state)
-{
- return 0;
-}
-
-static inline void dpm_runtime_resume(struct device * dev)
-{
-
-}
-
#endif
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index e8f0519f5df..adbc3148c03 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -36,6 +36,7 @@ void dpm_runtime_resume(struct device * dev)
runtime_resume(dev);
up(&dpm_sem);
}
+EXPORT_SYMBOL(dpm_runtime_resume);
/**
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index ed4d5006fe6..bfb23d543ff 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1512,7 +1512,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
scmd->nsg = 1;
sg = &scmd->sgv[0];
sg->page = virt_to_page(sc->top_sense);
- sg->offset = (unsigned int)sc->top_sense & (PAGE_SIZE-1);
+ sg->offset = (unsigned long)sc->top_sense & (PAGE_SIZE-1);
sg->length = UB_SENSE_SIZE;
scmd->len = UB_SENSE_SIZE;
scmd->lun = cmd->lun;
@@ -1891,7 +1891,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
cmd->nsg = 1;
sg = &cmd->sgv[0];
sg->page = virt_to_page(p);
- sg->offset = (unsigned int)p & (PAGE_SIZE-1);
+ sg->offset = (unsigned long)p & (PAGE_SIZE-1);
sg->length = 8;
cmd->len = 8;
cmd->lun = lun;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ee1605906a3..bbd9c2323d8 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -7,6 +7,9 @@
*
* Copyright (c) 1999 Martin Mares <mj@ucw.cz>
*
+ * Init/reset quirks for USB host controllers should be in the
+ * USB quirks file, where their drivers can access reuse it.
+ *
* The bridge optimization stuff has been removed. If you really
* have a silly BIOS which is unable to set your host bridge right,
* use the PowerTweak utility (see http://powertweak.sourceforge.net).
@@ -645,28 +648,6 @@ static void quirk_via_irq(struct pci_dev *dev)
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
- * PIIX3 USB: We have to disable USB interrupts that are
- * hardwired to PIRQD# and may be shared with an
- * external device.
- *
- * Legacy Support Register (LEGSUP):
- * bit13: USB PIRQ Enable (USBPIRQDEN),
- * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
- *
- * We mask out all r/wc bits, too.
- */
-static void __devinit quirk_piix3_usb(struct pci_dev *dev)
-{
- u16 legsup;
-
- pci_read_config_word(dev, 0xc0, &legsup);
- legsup &= 0x50ef;
- pci_write_config_word(dev, 0xc0, legsup);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
-
-/*
* VIA VT82C598 has its device ID settable and many BIOSes
* set it to the ID of VT82C597 for backward compatibility.
* We need to switch it off to be able to recognize the real
@@ -1039,234 +1020,6 @@ static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
pci_read_config_byte(dev, 0x77, &val);
}
-
-#define UHCI_USBLEGSUP 0xc0 /* legacy support */
-#define UHCI_USBCMD 0 /* command register */
-#define UHCI_USBSTS 2 /* status register */
-#define UHCI_USBINTR 4 /* interrupt register */
-#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
-#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
-#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
-#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
-
-#define OHCI_CONTROL 0x04
-#define OHCI_CMDSTATUS 0x08
-#define OHCI_INTRSTATUS 0x0c
-#define OHCI_INTRENABLE 0x10
-#define OHCI_INTRDISABLE 0x14
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-
-#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
-#define EHCI_USBCMD 0 /* command register */
-#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
-#define EHCI_USBSTS 4 /* status register */
-#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
-#define EHCI_USBINTR 8 /* interrupt register */
-#define EHCI_USBLEGSUP 0 /* legacy support register */
-#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
-#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
-#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
-#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
-
-int usb_early_handoff __devinitdata = 0;
-static int __init usb_handoff_early(char *str)
-{
- usb_early_handoff = 1;
- return 0;
-}
-__setup("usb-handoff", usb_handoff_early);
-
-static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
-{
- unsigned long base = 0;
- int wait_time, delta;
- u16 val, sts;
- int i;
-
- for (i = 0; i < PCI_ROM_RESOURCE; i++)
- if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
- base = pci_resource_start(pdev, i);
- break;
- }
-
- if (!base)
- return;
-
- /*
- * stop controller
- */
- sts = inw(base + UHCI_USBSTS);
- val = inw(base + UHCI_USBCMD);
- val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
- outw(val, base + UHCI_USBCMD);
-
- /*
- * wait while it stops if it was running
- */
- if ((sts & UHCI_USBSTS_HALTED) == 0)
- {
- wait_time = 1000;
- delta = 100;
-
- do {
- outw(0x1f, base + UHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = inw(base + UHCI_USBSTS);
- if (val & UHCI_USBSTS_HALTED)
- break;
- } while (wait_time > 0);
- }
-
- /*
- * disable interrupts & legacy support
- */
- outw(0, base + UHCI_USBINTR);
- outw(0x1f, base + UHCI_USBSTS);
- pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
- if (val & 0xbf)
- pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
-
-}
-
-static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
-{
- void __iomem *base;
- int wait_time;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time = 500; /* 0.5 seconds */
- writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
- writel(OHCI_OCR, base + OHCI_CMDSTATUS);
- while (wait_time > 0 &&
- readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
- wait_time -= 10;
- msleep(10);
- }
- }
-
- /*
- * disable interrupts
- */
- writel(~(u32)0, base + OHCI_INTRDISABLE);
- writel(~(u32)0, base + OHCI_INTRSTATUS);
-
- iounmap(base);
-}
-
-static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
-{
- int wait_time, delta;
- void __iomem *base, *op_reg_base;
- u32 hcc_params, val, temp;
- u8 cap_length;
-
- base = ioremap_nocache(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (base == NULL) return;
-
- cap_length = readb(base);
- op_reg_base = base + cap_length;
- hcc_params = readl(base + EHCI_HCC_PARAMS);
- hcc_params = (hcc_params >> 8) & 0xff;
- if (hcc_params) {
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
- /*
- * Ok, BIOS is in smm mode, try to hand off...
- */
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- &temp);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- temp | EHCI_USBLEGCTLSTS_SOOE);
- val |= EHCI_USBLEGSUP_OS;
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- val);
-
- wait_time = 500;
- do {
- msleep(10);
- wait_time -= 10;
- pci_read_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- &val);
- } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
- if (!wait_time) {
- /*
- * well, possibly buggy BIOS...
- */
- printk(KERN_WARNING "EHCI early BIOS handoff "
- "failed (BIOS bug ?)\n");
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGSUP,
- EHCI_USBLEGSUP_OS);
- pci_write_config_dword(pdev,
- hcc_params + EHCI_USBLEGCTLSTS,
- 0);
- }
- }
- }
-
- /*
- * halt EHCI & disable its interrupts in any case
- */
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val & EHCI_USBSTS_HALTED) == 0) {
- val = readl(op_reg_base + EHCI_USBCMD);
- val &= ~EHCI_USBCMD_RUN;
- writel(val, op_reg_base + EHCI_USBCMD);
-
- wait_time = 2000;
- delta = 100;
- do {
- writel(0x3f, op_reg_base + EHCI_USBSTS);
- udelay(delta);
- wait_time -= delta;
- val = readl(op_reg_base + EHCI_USBSTS);
- if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
- break;
- }
- } while (wait_time > 0);
- }
- writel(0, op_reg_base + EHCI_USBINTR);
- writel(0x3f, op_reg_base + EHCI_USBSTS);
-
- iounmap(base);
-
- return;
-}
-
-
-
-static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
-{
- if (!usb_early_handoff)
- return;
-
- if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
- quirk_usb_handoff_uhci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
- quirk_usb_handoff_ohci(pdev);
- } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
- quirk_usb_disable_ehci(pdev);
- }
-
- return;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
-
/*
* ... This is further complicated by the fact that some SiS96x south
* bridges pretend to be 85C503/5513 instead. In that case see if we
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index df014c2a7c5..a50c2bc506f 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/
obj-$(CONFIG_USB_MON) += mon/
+obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
@@ -17,7 +18,6 @@ obj-$(CONFIG_ETRAX_USB_HOST) += host/
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_AUDIO) += class/
-obj-$(CONFIG_USB_BLUETOOTH_TTY) += class/
obj-$(CONFIG_USB_MIDI) += class/
obj-$(CONFIG_USB_PRINTER) += class/
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index 333e39bb105..ef105a92a7b 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -28,29 +28,6 @@ config USB_AUDIO
To compile this driver as a module, choose M here: the
module will be called audio.
-comment "USB Bluetooth TTY can only be used with disabled Bluetooth subsystem"
- depends on USB && BT
-
-config USB_BLUETOOTH_TTY
- tristate "USB Bluetooth TTY support"
- depends on USB && BT=n
- ---help---
- This driver implements a nonstandard tty interface to a Bluetooth
- device that can be used only by specialized Bluetooth HCI software.
-
- Say Y here if you want to use OpenBT Bluetooth stack (available
- at <http://developer.axis.com/software>), or other TTY based
- Bluetooth stacks, and want to connect a USB Bluetooth device
- to your computer's USB port.
-
- Do *not* enable this driver if you want to use generic Linux
- Bluetooth support.
-
- If in doubt, say N here.
-
- To compile this driver as a module, choose M here: the
- module will be called bluetty.
-
config USB_MIDI
tristate "USB MIDI support"
depends on USB && SOUND && OBSOLETE_OSS_USB_DRIVER
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
index 971e5497a3f..22947124775 100644
--- a/drivers/usb/class/Makefile
+++ b/drivers/usb/class/Makefile
@@ -5,6 +5,5 @@
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_AUDIO) += audio.o
-obj-$(CONFIG_USB_BLUETOOTH_TTY) += bluetty.o
obj-$(CONFIG_USB_MIDI) += usb-midi.o
obj-$(CONFIG_USB_PRINTER) += usblp.o
diff --git a/drivers/usb/class/bluetty.c b/drivers/usb/class/bluetty.c
deleted file mode 100644
index 524023327c4..00000000000
--- a/drivers/usb/class/bluetty.c
+++ /dev/null
@@ -1,1279 +0,0 @@
-/*
- * bluetty.c Version 0.13
- *
- * Copyright (C) 2000, 2001 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2000 Mark Douglas Corner <mcorner@umich.edu>
- *
- * USB Bluetooth TTY driver, based on the Bluetooth Spec version 1.0B
- *
- * (2001/11/30) Version 0.13 gkh
- * - added locking patch from Masoodur Rahman <rmasoodu@in.ibm.com>
- * - removed active variable, as open_count will do.
- *
- * (2001/07/09) Version 0.12 gkh
- * - removed in_interrupt() call, as it doesn't make sense to do
- * that anymore.
- *
- * (2001/06/05) Version 0.11 gkh
- * - Fixed problem with read urb status saying that we have shutdown,
- * and that we shouldn't resubmit the urb. Patch from unknown.
- *
- * (2001/05/28) Version 0.10 gkh
- * - Fixed problem with using data from userspace in the bluetooth_write
- * function as found by the CHECKER project.
- * - Added a buffer to the write_urb_pool which reduces the number of
- * buffers being created and destroyed for ever write. Also cleans
- * up the logic a bit.
- * - Added a buffer to the control_urb_pool which fixes a memory leak
- * when the device is removed from the system.
- *
- * (2001/05/28) Version 0.9 gkh
- * Fixed problem with bluetooth==NULL for bluetooth_read_bulk_callback
- * which was found by both the CHECKER project and Mikko Rahkonen.
- *
- * (08/04/2001) gb
- * Identify version on module load.
- *
- * (2001/03/10) Version 0.8 gkh
- * Fixed problem with not unlinking interrupt urb on device close
- * and resubmitting the read urb on error with bluetooth struct.
- * Thanks to Narayan Mohanram <narayan@RovingNetworks.com> for the
- * fixes.
- *
- * (11/29/2000) Version 0.7 gkh
- * Fixed problem with overrunning the tty flip buffer.
- * Removed unneeded NULL pointer initialization.
- *
- * (10/05/2000) Version 0.6 gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- * Got a real major id number and name.
- *
- * (08/06/2000) Version 0.5 gkh
- * Fixed problem of not resubmitting the bulk read urb if there is
- * an error in the callback. Ericsson devices seem to need this.
- *
- * (07/11/2000) Version 0.4 gkh
- * Fixed bug in disconnect for when we call tty_hangup
- * Fixed bug in bluetooth_ctrl_msg where the bluetooth struct was not
- * getting attached to the control urb properly.
- * Fixed bug in bluetooth_write where we pay attention to the result
- * of bluetooth_ctrl_msg.
- *
- * (08/03/2000) Version 0.3 gkh mdc
- * Merged in Mark's changes to make the driver play nice with the Axis
- * stack.
- * Made the write bulk use an urb pool to enable larger transfers with
- * fewer calls to the driver.
- * Fixed off by one bug in acl pkt receive
- * Made packet counters specific to each bluetooth device
- * Added checks for zero length callbacks
- * Added buffers for int and bulk packets. Had to do this otherwise
- * packet types could intermingle.
- * Made a control urb pool for the control messages.
- *
- * (07/11/2000) Version 0.2 gkh
- * Fixed a small bug found by Nils Faerber in the usb_bluetooth_probe
- * function.
- *
- * (07/09/2000) Version 0.1 gkh
- * Initial release. Has support for sending ACL data (which is really just
- * a HCI frame.) Raw HCI commands and HCI events are not supported.
- * A ioctl will probably be needed for the HCI commands and events in the
- * future. All isoch endpoints are ignored at this time also.
- * This driver should work for all currently shipping USB Bluetooth
- * devices at this time :)
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <asm/uaccess.h>
-
-#define DEBUG
-#include <linux/usb.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.13"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman, Mark Douglas Corner"
-#define DRIVER_DESC "USB Bluetooth tty driver"
-
-/* define this if you have hardware that is not good */
-/*#define BTBUGGYHARDWARE */
-
-/* Class, SubClass, and Protocol codes that describe a Bluetooth device */
-#define WIRELESS_CLASS_CODE 0xe0
-#define RF_SUBCLASS_CODE 0x01
-#define BLUETOOTH_PROGRAMMING_PROTOCOL_CODE 0x01
-
-
-#define BLUETOOTH_TTY_MAJOR 216 /* real device node major id */
-#define BLUETOOTH_TTY_MINORS 256 /* whole lotta bluetooth devices */
-
-#define USB_BLUETOOTH_MAGIC 0x6d02 /* magic number for bluetooth struct */
-
-#define BLUETOOTH_CONTROL_REQUEST_TYPE 0x20
-
-/* Bluetooth packet types */
-#define CMD_PKT 0x01
-#define ACL_PKT 0x02
-#define SCO_PKT 0x03
-#define EVENT_PKT 0x04
-#define ERROR_PKT 0x05
-#define NEG_PKT 0x06
-
-/* Message sizes */
-#define MAX_EVENT_SIZE 0xFF
-#define EVENT_HDR_SIZE 3 /* 2 for the header + 1 for the type indicator */
-#define EVENT_BUFFER_SIZE (MAX_EVENT_SIZE + EVENT_HDR_SIZE)
-
-#define MAX_ACL_SIZE 0xFFFF
-#define ACL_HDR_SIZE 5 /* 4 for the header + 1 for the type indicator */
-#define ACL_BUFFER_SIZE (MAX_ACL_SIZE + ACL_HDR_SIZE)
-
-/* parity check flag */
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-#define CHAR2INT16(c1,c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
-
-#define NUM_BULK_URBS 24
-#define NUM_CONTROL_URBS 16
-
-struct usb_bluetooth {
- int magic;
- struct usb_device * dev;
- struct tty_driver * tty_driver; /* the tty_driver for this device */
- struct tty_struct * tty; /* the corresponding tty for this port */
-
- unsigned char minor; /* the starting minor number for this device */
- int throttle; /* throttled by tty layer */
- int open_count;
-
- __u8 control_out_bInterfaceNum;
- struct urb * control_urb_pool[NUM_CONTROL_URBS];
- struct usb_ctrlrequest dr[NUM_CONTROL_URBS];
-
- unsigned char * interrupt_in_buffer;
- struct urb * interrupt_in_urb;
- __u8 interrupt_in_endpointAddress;
- __u8 interrupt_in_interval;
- int interrupt_in_buffer_size;
-
- unsigned char * bulk_in_buffer;
- struct urb * read_urb;
- __u8 bulk_in_endpointAddress;
- int bulk_in_buffer_size;
-
- int bulk_out_buffer_size;
- __u8 bulk_out_endpointAddress;
-
- wait_queue_head_t write_wait;
-
- struct work_struct work; /* work queue entry for line discipline waking up */
-
- unsigned int int_packet_pos;
- unsigned char int_buffer[EVENT_BUFFER_SIZE];
- unsigned int bulk_packet_pos;
- unsigned char bulk_buffer[ACL_BUFFER_SIZE]; /* 64k preallocated, fix? */
- struct semaphore lock;
-};
-
-
-/* local function prototypes */
-static int bluetooth_open (struct tty_struct *tty, struct file *filp);
-static void bluetooth_close (struct tty_struct *tty, struct file *filp);
-static int bluetooth_write (struct tty_struct *tty, const unsigned char *buf, int count);
-static int bluetooth_write_room (struct tty_struct *tty);
-static int bluetooth_chars_in_buffer (struct tty_struct *tty);
-static void bluetooth_throttle (struct tty_struct *tty);
-static void bluetooth_unthrottle (struct tty_struct *tty);
-static int bluetooth_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
-static void bluetooth_set_termios (struct tty_struct *tty, struct termios *old);
-
-static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs);
-static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs);
-static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-
-static int usb_bluetooth_probe (struct usb_interface *intf,
- const struct usb_device_id *id);
-static void usb_bluetooth_disconnect (struct usb_interface *intf);
-
-
-static struct usb_device_id usb_bluetooth_ids [] = {
- { USB_DEVICE_INFO(WIRELESS_CLASS_CODE, RF_SUBCLASS_CODE, BLUETOOTH_PROGRAMMING_PROTOCOL_CODE) },
- { } /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_bluetooth_ids);
-
-static struct usb_driver usb_bluetooth_driver = {
- .owner = THIS_MODULE,
- .name = "bluetty",
- .probe = usb_bluetooth_probe,
- .disconnect = usb_bluetooth_disconnect,
- .id_table = usb_bluetooth_ids,
-};
-
-static struct tty_driver *bluetooth_tty_driver;
-static struct usb_bluetooth *bluetooth_table[BLUETOOTH_TTY_MINORS];
-
-
-static inline int bluetooth_paranoia_check (struct usb_bluetooth *bluetooth, const char *function)
-{
- if (!bluetooth) {
- dbg("%s - bluetooth == NULL", function);
- return -1;
- }
- if (bluetooth->magic != USB_BLUETOOTH_MAGIC) {
- dbg("%s - bad magic number for bluetooth", function);
- return -1;
- }
-
- return 0;
-}
-
-
-static inline struct usb_bluetooth* get_usb_bluetooth (struct usb_bluetooth *bluetooth, const char *function)
-{
- if (!bluetooth ||
- bluetooth_paranoia_check (bluetooth, function)) {
- /* then say that we don't have a valid usb_bluetooth thing, which will
- * end up generating -ENODEV return values */
- return NULL;
- }
-
- return bluetooth;
-}
-
-
-static inline struct usb_bluetooth *get_bluetooth_by_index (int index)
-{
- return bluetooth_table[index];
-}
-
-
-static int bluetooth_ctrl_msg (struct usb_bluetooth *bluetooth, int request, int value, const unsigned char *buf, int len)
-{
- struct urb *urb = NULL;
- struct usb_ctrlrequest *dr = NULL;
- int i;
- int status;
-
- dbg ("%s", __FUNCTION__);
-
- /* try to find a free urb in our list */
- for (i = 0; i < NUM_CONTROL_URBS; ++i) {
- if (bluetooth->control_urb_pool[i]->status != -EINPROGRESS) {
- urb = bluetooth->control_urb_pool[i];
- dr = &bluetooth->dr[i];
- break;
- }
- }
- if (urb == NULL) {
- dbg ("%s - no free urbs", __FUNCTION__);
- return -ENOMEM;
- }
-
- /* keep increasing the urb transfer buffer to fit the size of the message */
- if (urb->transfer_buffer == NULL) {
- urb->transfer_buffer = kmalloc (len, GFP_KERNEL);
- if (urb->transfer_buffer == NULL) {
- err ("%s - out of memory", __FUNCTION__);
- return -ENOMEM;
- }
- }
- if (urb->transfer_buffer_length < len) {
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = kmalloc (len, GFP_KERNEL);
- if (urb->transfer_buffer == NULL) {
- err ("%s - out of memory", __FUNCTION__);
- return -ENOMEM;
- }
- }
- memcpy (urb->transfer_buffer, buf, len);
-
- dr->bRequestType= BLUETOOTH_CONTROL_REQUEST_TYPE;
- dr->bRequest = request;
- dr->wValue = cpu_to_le16((u16) value);
- dr->wIndex = cpu_to_le16((u16) bluetooth->control_out_bInterfaceNum);
- dr->wLength = cpu_to_le16((u16) len);
-
- usb_fill_control_urb (urb, bluetooth->dev, usb_sndctrlpipe(bluetooth->dev, 0),
- (unsigned char*)dr, urb->transfer_buffer, len, bluetooth_ctrl_callback, bluetooth);
-
- /* send it down the pipe */
- status = usb_submit_urb(urb, GFP_KERNEL);
- if (status)
- dbg("%s - usb_submit_urb(control) failed with status = %d", __FUNCTION__, status);
-
- return status;
-}
-
-
-
-
-
-/*****************************************************************************
- * Driver tty interface functions
- *****************************************************************************/
-static int bluetooth_open (struct tty_struct *tty, struct file * filp)
-{
- struct usb_bluetooth *bluetooth;
- int result;
-
- dbg("%s", __FUNCTION__);
-
- /* initialize the pointer incase something fails */
- tty->driver_data = NULL;
-
- /* get the bluetooth object associated with this tty pointer */
- bluetooth = get_bluetooth_by_index (tty->index);
-
- if (bluetooth_paranoia_check (bluetooth, __FUNCTION__)) {
- return -ENODEV;
- }
-
- down (&bluetooth->lock);
-
- ++bluetooth->open_count;
- if (bluetooth->open_count == 1) {
- /* set up our structure making the tty driver remember our object, and us it */
- tty->driver_data = bluetooth;
- bluetooth->tty = tty;
-
- /* force low_latency on so that our tty_push actually forces the data through,
- * otherwise it is scheduled, and with high data rates (like with OHCI) data
- * can get lost. */
- bluetooth->tty->low_latency = 1;
-
- /* Reset the packet position counters */
- bluetooth->int_packet_pos = 0;
- bluetooth->bulk_packet_pos = 0;
-
-#ifndef BTBUGGYHARDWARE
- /* Start reading from the device */
- usb_fill_bulk_urb (bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer,
- bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
-#endif
- usb_fill_int_urb (bluetooth->interrupt_in_urb, bluetooth->dev,
- usb_rcvintpipe(bluetooth->dev, bluetooth->interrupt_in_endpointAddress),
- bluetooth->interrupt_in_buffer,
- bluetooth->interrupt_in_buffer_size,
- bluetooth_int_callback, bluetooth,
- bluetooth->interrupt_in_interval);
- result = usb_submit_urb(bluetooth->interrupt_in_urb, GFP_KERNEL);
- if (result)
- dbg("%s - usb_submit_urb(interrupt in) failed with status %d", __FUNCTION__, result);
- }
-
- up(&bluetooth->lock);
-
- return 0;
-}
-
-
-static void bluetooth_close (struct tty_struct *tty, struct file * filp)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not opened", __FUNCTION__);
- return;
- }
-
- down (&bluetooth->lock);
-
- --bluetooth->open_count;
- if (bluetooth->open_count <= 0) {
- bluetooth->open_count = 0;
-
- /* shutdown any in-flight urbs that we know about */
- usb_kill_urb (bluetooth->read_urb);
- usb_kill_urb (bluetooth->interrupt_in_urb);
- }
- up(&bluetooth->lock);
-}
-
-
-static int bluetooth_write (struct tty_struct * tty, const unsigned char *buf, int count)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
- struct urb *urb = NULL;
- unsigned char *temp_buffer = NULL;
- const unsigned char *current_buffer;
- unsigned char *urb_buffer;
- int i;
- int retval = 0;
-
- if (!bluetooth) {
- return -ENODEV;
- }
-
- dbg("%s - %d byte(s)", __FUNCTION__, count);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not opened", __FUNCTION__);
- return -EINVAL;
- }
-
- if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
- return 0;
- }
- if (count == 1) {
- dbg("%s - write request only included type %d", __FUNCTION__, buf[0]);
- return 1;
- }
-
-#ifdef DEBUG
- printk (KERN_DEBUG __FILE__ ": %s - length = %d, data = ", __FUNCTION__, count);
- for (i = 0; i < count; ++i) {
- printk ("%.2x ", buf[i]);
- }
- printk ("\n");
-#endif
-
- current_buffer = buf;
-
- switch (*current_buffer) {
- /* First byte indicates the type of packet */
- case CMD_PKT:
- /* dbg("%s- Send cmd_pkt len:%d", __FUNCTION__, count);*/
-
- retval = bluetooth_ctrl_msg (bluetooth, 0x00, 0x00, &current_buffer[1], count-1);
- if (retval) {
- goto exit;
- }
- retval = count;
- break;
-
- case ACL_PKT:
- ++current_buffer;
- --count;
-
- urb_buffer = kmalloc (count, GFP_ATOMIC);
- if (!urb_buffer) {
- dev_err(&bluetooth->dev->dev, "out of memory\n");
- retval = -ENOMEM;
- goto exit;
- }
-
- urb = usb_alloc_urb(0, GFP_ATOMIC);
- if (!urb) {
- dev_err(&bluetooth->dev->dev, "no more free urbs\n");
- kfree(urb_buffer);
- retval = -ENOMEM;
- goto exit;
- }
- memcpy (urb_buffer, current_buffer, count);
-
- /* build up our urb */
- usb_fill_bulk_urb(urb, bluetooth->dev,
- usb_sndbulkpipe(bluetooth->dev,
- bluetooth->bulk_out_endpointAddress),
- urb_buffer,
- count,
- bluetooth_write_bulk_callback,
- bluetooth);
-
-
- /* send it down the pipe */
- retval = usb_submit_urb(urb, GFP_KERNEL);
- if (retval) {
- dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, retval);
- goto exit;
- }
-
- /* we are done with this urb, so let the host driver
- * really free it when it is finished with it */
- usb_free_urb (urb);
- retval = count + 1;
- break;
-
- default :
- dbg("%s - unsupported (at this time) write type", __FUNCTION__);
- retval = -EINVAL;
- break;
- }
-
-exit:
- kfree(temp_buffer);
-
- return retval;
-}
-
-
-static int bluetooth_write_room (struct tty_struct *tty)
-{
- dbg("%s", __FUNCTION__);
-
- /*
- * We really can take anything the user throws at us
- * but let's pick a nice big number to tell the tty
- * layer that we have lots of free space
- */
- return 2048;
-}
-
-
-static int bluetooth_chars_in_buffer (struct tty_struct *tty)
-{
- dbg("%s", __FUNCTION__);
-
- /*
- * We can't really account for how much data we
- * have sent out, but hasn't made it through to the
- * device, so just tell the tty layer that everything
- * is flushed.
- */
- return 0;
-}
-
-
-static void bluetooth_throttle (struct tty_struct * tty)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- dbg("%s unsupported (at this time)", __FUNCTION__);
-
- return;
-}
-
-
-static void bluetooth_unthrottle (struct tty_struct * tty)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- dbg("%s unsupported (at this time)", __FUNCTION__);
-}
-
-
-static int bluetooth_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return -ENODEV;
- }
-
- dbg("%s - cmd 0x%.4x", __FUNCTION__, cmd);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return -ENODEV;
- }
-
- /* FIXME!!! */
- return -ENOIOCTLCMD;
-}
-
-
-static void bluetooth_set_termios (struct tty_struct *tty, struct termios * old)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- /* FIXME!!! */
-
- return;
-}
-
-
-#ifdef BTBUGGYHARDWARE
-void btusb_enable_bulk_read(struct tty_struct *tty){
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
- int result;
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- if (bluetooth->read_urb) {
- usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- err ("%s - failed submitting read urb, error %d", __FUNCTION__, result);
- }
-}
-
-void btusb_disable_bulk_read(struct tty_struct *tty){
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)tty->driver_data, __FUNCTION__);
-
- if (!bluetooth) {
- return;
- }
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth->open_count) {
- dbg ("%s - device not open", __FUNCTION__);
- return;
- }
-
- if ((bluetooth->read_urb) && (bluetooth->read_urb->actual_length))
- usb_kill_urb(bluetooth->read_urb);
-}
-#endif
-
-
-/*****************************************************************************
- * urb callback functions
- *****************************************************************************/
-
-
-static void bluetooth_int_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
- unsigned char *data = urb->transfer_buffer;
- unsigned int i;
- unsigned int count = urb->actual_length;
- unsigned int packet_size;
- int status;
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
- return;
- default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
- goto exit;
- }
-
- if (!count) {
- dbg("%s - zero length int", __FUNCTION__);
- goto exit;
- }
-
-
-#ifdef DEBUG
- if (count) {
- printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count);
- for (i = 0; i < count; ++i) {
- printk ("%.2x ", data[i]);
- }
- printk ("\n");
- }
-#endif
-
-#ifdef BTBUGGYHARDWARE
- if ((count >= 2) && (data[0] == 0xFF) && (data[1] == 0x00)) {
- data += 2;
- count -= 2;
- }
- if (count == 0) {
- urb->actual_length = 0;
- goto exit;
- }
-#endif
- /* We add a packet type identifier to the beginning of each
- HCI frame. This makes the data in the tty look like a
- serial USB devices. Each HCI frame can be broken across
- multiple URBs so we buffer them until we have a full hci
- packet */
-
- if (!bluetooth->int_packet_pos) {
- bluetooth->int_buffer[0] = EVENT_PKT;
- bluetooth->int_packet_pos++;
- }
-
- if (bluetooth->int_packet_pos + count > EVENT_BUFFER_SIZE) {
- err("%s - exceeded EVENT_BUFFER_SIZE", __FUNCTION__);
- bluetooth->int_packet_pos = 0;
- goto exit;
- }
-
- memcpy (&bluetooth->int_buffer[bluetooth->int_packet_pos],
- urb->transfer_buffer, count);
- bluetooth->int_packet_pos += count;
- urb->actual_length = 0;
-
- if (bluetooth->int_packet_pos >= EVENT_HDR_SIZE)
- packet_size = bluetooth->int_buffer[2];
- else
- goto exit;
-
- if (packet_size + EVENT_HDR_SIZE < bluetooth->int_packet_pos) {
- err("%s - packet was too long", __FUNCTION__);
- bluetooth->int_packet_pos = 0;
- goto exit;
- }
-
- if (packet_size + EVENT_HDR_SIZE == bluetooth->int_packet_pos) {
- for (i = 0; i < bluetooth->int_packet_pos; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them */
- if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(bluetooth->tty);
- }
- tty_insert_flip_char(bluetooth->tty, bluetooth->int_buffer[i], 0);
- }
- tty_flip_buffer_push(bluetooth->tty);
-
- bluetooth->int_packet_pos = 0;
- }
-
-exit:
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status)
- err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
-}
-
-
-static void bluetooth_ctrl_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- if (urb->status) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
- return;
- }
-}
-
-
-static void bluetooth_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
- unsigned char *data = urb->transfer_buffer;
- unsigned int count = urb->actual_length;
- unsigned int i;
- unsigned int packet_size;
- int result;
-
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- if (urb->status) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
- if (urb->status == -ENOENT) {
- dbg("%s - URB canceled, won't reschedule", __FUNCTION__);
- return;
- }
- goto exit;
- }
-
- if (!count) {
- dbg("%s - zero length read bulk", __FUNCTION__);
- goto exit;
- }
-
-#ifdef DEBUG
- if (count) {
- printk (KERN_DEBUG __FILE__ ": %s- length = %d, data = ", __FUNCTION__, count);
- for (i = 0; i < count; ++i) {
- printk ("%.2x ", data[i]);
- }
- printk ("\n");
- }
-#endif
-#ifdef BTBUGGYHARDWARE
- if ((count == 4) && (data[0] == 0x00) && (data[1] == 0x00)
- && (data[2] == 0x00) && (data[3] == 0x00)) {
- urb->actual_length = 0;
- usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
-
- return;
- }
-#endif
- /* We add a packet type identifier to the beginning of each
- HCI frame. This makes the data in the tty look like a
- serial USB devices. Each HCI frame can be broken across
- multiple URBs so we buffer them until we have a full hci
- packet */
-
- if (!bluetooth->bulk_packet_pos) {
- bluetooth->bulk_buffer[0] = ACL_PKT;
- bluetooth->bulk_packet_pos++;
- }
-
- if (bluetooth->bulk_packet_pos + count > ACL_BUFFER_SIZE) {
- err("%s - exceeded ACL_BUFFER_SIZE", __FUNCTION__);
- bluetooth->bulk_packet_pos = 0;
- goto exit;
- }
-
- memcpy (&bluetooth->bulk_buffer[bluetooth->bulk_packet_pos],
- urb->transfer_buffer, count);
- bluetooth->bulk_packet_pos += count;
- urb->actual_length = 0;
-
- if (bluetooth->bulk_packet_pos >= ACL_HDR_SIZE) {
- packet_size = CHAR2INT16(bluetooth->bulk_buffer[4],bluetooth->bulk_buffer[3]);
- } else {
- goto exit;
- }
-
- if (packet_size + ACL_HDR_SIZE < bluetooth->bulk_packet_pos) {
- err("%s - packet was too long", __FUNCTION__);
- bluetooth->bulk_packet_pos = 0;
- goto exit;
- }
-
- if (packet_size + ACL_HDR_SIZE == bluetooth->bulk_packet_pos) {
- for (i = 0; i < bluetooth->bulk_packet_pos; ++i) {
- /* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
- if (bluetooth->tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(bluetooth->tty);
- }
- tty_insert_flip_char(bluetooth->tty, bluetooth->bulk_buffer[i], 0);
- }
- tty_flip_buffer_push(bluetooth->tty);
- bluetooth->bulk_packet_pos = 0;
- }
-
-exit:
- if (!bluetooth || !bluetooth->open_count)
- return;
-
- usb_fill_bulk_urb(bluetooth->read_urb, bluetooth->dev,
- usb_rcvbulkpipe(bluetooth->dev, bluetooth->bulk_in_endpointAddress),
- bluetooth->bulk_in_buffer, bluetooth->bulk_in_buffer_size,
- bluetooth_read_bulk_callback, bluetooth);
- result = usb_submit_urb(bluetooth->read_urb, GFP_KERNEL);
- if (result)
- err ("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
-
- return;
-}
-
-
-static void bluetooth_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)urb->context, __FUNCTION__);
-
- dbg("%s", __FUNCTION__);
-
- /* free up the transfer buffer, as usb_free_urb() does not do this */
- kfree(urb->transfer_buffer);
-
- if (!bluetooth) {
- dbg("%s - bad bluetooth pointer, exiting", __FUNCTION__);
- return;
- }
-
- if (urb->status) {
- dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
- return;
- }
-
- /* wake up our little function to let the tty layer know that something happened */
- schedule_work(&bluetooth->work);
-}
-
-
-static void bluetooth_softint(void *private)
-{
- struct usb_bluetooth *bluetooth = get_usb_bluetooth ((struct usb_bluetooth *)private, __FUNCTION__);
-
- dbg("%s", __FUNCTION__);
-
- if (!bluetooth)
- return;
-
- tty_wakeup(bluetooth->tty);
-}
-
-
-static int usb_bluetooth_probe (struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- struct usb_device *dev = interface_to_usbdev (intf);
- struct usb_bluetooth *bluetooth = NULL;
- struct usb_host_interface *interface;
- struct usb_endpoint_descriptor *endpoint;
- struct usb_endpoint_descriptor *interrupt_in_endpoint[8];
- struct usb_endpoint_descriptor *bulk_in_endpoint[8];
- struct usb_endpoint_descriptor *bulk_out_endpoint[8];
- int control_out_endpoint;
-
- int minor;
- int buffer_size;
- int i;
- int num_interrupt_in = 0;
- int num_bulk_in = 0;
- int num_bulk_out = 0;
-
- interface = intf->cur_altsetting;
- control_out_endpoint = interface->desc.bInterfaceNumber;
-
- /* find the endpoints that we need */
- for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
- endpoint = &interface->endpoint[i].desc;
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
- /* we found a bulk in endpoint */
- dbg("found bulk in");
- bulk_in_endpoint[num_bulk_in] = endpoint;
- ++num_bulk_in;
- }
-
- if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
- ((endpoint->bmAttributes & 3) == 0x02)) {
- /* we found a bulk out endpoint */
- dbg("found bulk out");
- bulk_out_endpoint[num_bulk_out] = endpoint;
- ++num_bulk_out;
- }
-
- if ((endpoint->bEndpointAddress & 0x80) &&
- ((endpoint->bmAttributes & 3) == 0x03)) {
- /* we found a interrupt in endpoint */
- dbg("found interrupt in");
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
- }
- }
-
- /* according to the spec, we can only have 1 bulk_in, 1 bulk_out, and 1 interrupt_in endpoints */
- if ((num_bulk_in != 1) ||
- (num_bulk_out != 1) ||
- (num_interrupt_in != 1)) {
- dbg ("%s - improper number of endpoints. Bluetooth driver not bound.", __FUNCTION__);
- return -EIO;
- }
-
- info("USB Bluetooth converter detected");
-
- for (minor = 0; minor < BLUETOOTH_TTY_MINORS && bluetooth_table[minor]; ++minor)
- ;
- if (bluetooth_table[minor]) {
- err("No more free Bluetooth devices");
- return -ENODEV;
- }
-
- if (!(bluetooth = kmalloc(sizeof(struct usb_bluetooth), GFP_KERNEL))) {
- err("Out of memory");
- return -ENOMEM;
- }
-
- memset(bluetooth, 0, sizeof(struct usb_bluetooth));
-
- bluetooth->magic = USB_BLUETOOTH_MAGIC;
- bluetooth->dev = dev;
- bluetooth->minor = minor;
- INIT_WORK(&bluetooth->work, bluetooth_softint, bluetooth);
- init_MUTEX(&bluetooth->lock);
-
- /* record the interface number for the control out */
- bluetooth->control_out_bInterfaceNum = control_out_endpoint;
-
- /* create our control out urb pool */
- for (i = 0; i < NUM_CONTROL_URBS; ++i) {
- struct urb *urb = usb_alloc_urb(0, GFP_KERNEL);
- if (urb == NULL) {
- err("No free urbs available");
- goto probe_error;
- }
- urb->transfer_buffer = NULL;
- bluetooth->control_urb_pool[i] = urb;
- }
-
- /* set up the endpoint information */
- endpoint = bulk_in_endpoint[0];
- bluetooth->read_urb = usb_alloc_urb (0, GFP_KERNEL);
- if (!bluetooth->read_urb) {
- err("No free urbs available");
- goto probe_error;
- }
- bluetooth->bulk_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
- bluetooth->bulk_in_endpointAddress = endpoint->bEndpointAddress;
- bluetooth->bulk_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
- if (!bluetooth->bulk_in_buffer) {
- err("Couldn't allocate bulk_in_buffer");
- goto probe_error;
- }
- usb_fill_bulk_urb(bluetooth->read_urb, dev, usb_rcvbulkpipe(dev, endpoint->bEndpointAddress),
- bluetooth->bulk_in_buffer, buffer_size, bluetooth_read_bulk_callback, bluetooth);
-
- endpoint = bulk_out_endpoint[0];
- bluetooth->bulk_out_endpointAddress = endpoint->bEndpointAddress;
- bluetooth->bulk_out_buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2;
-
- endpoint = interrupt_in_endpoint[0];
- bluetooth->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!bluetooth->interrupt_in_urb) {
- err("No free urbs available");
- goto probe_error;
- }
- bluetooth->interrupt_in_buffer_size = buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
- bluetooth->interrupt_in_endpointAddress = endpoint->bEndpointAddress;
- bluetooth->interrupt_in_interval = endpoint->bInterval;
- bluetooth->interrupt_in_buffer = kmalloc (buffer_size, GFP_KERNEL);
- if (!bluetooth->interrupt_in_buffer) {
- err("Couldn't allocate interrupt_in_buffer");
- goto probe_error;
- }
- usb_fill_int_urb(bluetooth->interrupt_in_urb, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress),
- bluetooth->interrupt_in_buffer, buffer_size, bluetooth_int_callback,
- bluetooth, endpoint->bInterval);
-
- /* initialize the devfs nodes for this device and let the user know what bluetooths we are bound to */
- tty_register_device (bluetooth_tty_driver, minor, &intf->dev);
- info("Bluetooth converter now attached to ttyUB%d (or usb/ttub/%d for devfs)", minor, minor);
-
- bluetooth_table[minor] = bluetooth;
-
- /* success */
- usb_set_intfdata (intf, bluetooth);
- return 0;
-
-probe_error:
- if (bluetooth->read_urb)
- usb_free_urb (bluetooth->read_urb);
- if (bluetooth->bulk_in_buffer)
- kfree (bluetooth->bulk_in_buffer);
- if (bluetooth->interrupt_in_urb)
- usb_free_urb (bluetooth->interrupt_in_urb);
- if (bluetooth->interrupt_in_buffer)
- kfree (bluetooth->interrupt_in_buffer);
- for (i = 0; i < NUM_CONTROL_URBS; ++i)
- if (bluetooth->control_urb_pool[i]) {
- if (bluetooth->control_urb_pool[i]->transfer_buffer)
- kfree (bluetooth->control_urb_pool[i]->transfer_buffer);
- usb_free_urb (bluetooth->control_urb_pool[i]);
- }
-
- bluetooth_table[minor] = NULL;
-
- /* free up any memory that we allocated */
- kfree (bluetooth);
- return -EIO;
-}
-
-
-static void usb_bluetooth_disconnect(struct usb_interface *intf)
-{
- struct usb_bluetooth *bluetooth = usb_get_intfdata (intf);
- int i;
-
- usb_set_intfdata (intf, NULL);
- if (bluetooth) {
- if ((bluetooth->open_count) && (bluetooth->tty))
- tty_hangup(bluetooth->tty);
-
- bluetooth->open_count = 0;
-
- if (bluetooth->read_urb) {
- usb_kill_urb (bluetooth->read_urb);
- usb_free_urb (bluetooth->read_urb);
- }
- if (bluetooth->bulk_in_buffer)
- kfree (bluetooth->bulk_in_buffer);
-
- if (bluetooth->interrupt_in_urb) {
- usb_kill_urb (bluetooth->interrupt_in_urb);
- usb_free_urb (bluetooth->interrupt_in_urb);
- }
- if (bluetooth->interrupt_in_buffer)
- kfree (bluetooth->interrupt_in_buffer);
-
- tty_unregister_device (bluetooth_tty_driver, bluetooth->minor);
-
- for (i = 0; i < NUM_CONTROL_URBS; ++i) {
- if (bluetooth->control_urb_pool[i]) {
- usb_kill_urb (bluetooth->control_urb_pool[i]);
- if (bluetooth->control_urb_pool[i]->transfer_buffer)
- kfree (bluetooth->control_urb_pool[i]->transfer_buffer);
- usb_free_urb (bluetooth->control_urb_pool[i]);
- }
- }
-
- info("Bluetooth converter now disconnected from ttyUB%d", bluetooth->minor);
-
- bluetooth_table[bluetooth->minor] = NULL;
-
- /* free up any memory that we allocated */
- kfree (bluetooth);
- } else {
- info("device disconnected");
- }
-}
-
-static struct tty_operations bluetooth_ops = {
- .open = bluetooth_open,
- .close = bluetooth_close,
- .write = bluetooth_write,
- .write_room = bluetooth_write_room,
- .ioctl = bluetooth_ioctl,
- .set_termios = bluetooth_set_termios,
- .throttle = bluetooth_throttle,
- .unthrottle = bluetooth_unthrottle,
- .chars_in_buffer = bluetooth_chars_in_buffer,
-};
-
-static int usb_bluetooth_init(void)
-{
- int i;
- int result;
-
- /* Initialize our global data */
- for (i = 0; i < BLUETOOTH_TTY_MINORS; ++i) {
- bluetooth_table[i] = NULL;
- }
-
- info ("USB Bluetooth support registered");
-
- bluetooth_tty_driver = alloc_tty_driver(BLUETOOTH_TTY_MINORS);
- if (!bluetooth_tty_driver)
- return -ENOMEM;
-
- bluetooth_tty_driver->owner = THIS_MODULE;
- bluetooth_tty_driver->driver_name = "usb-bluetooth";
- bluetooth_tty_driver->name = "ttyUB";
- bluetooth_tty_driver->devfs_name = "usb/ttub/";
- bluetooth_tty_driver->major = BLUETOOTH_TTY_MAJOR;
- bluetooth_tty_driver->minor_start = 0;
- bluetooth_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- bluetooth_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- bluetooth_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
- bluetooth_tty_driver->init_termios = tty_std_termios;
- bluetooth_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- tty_set_operations(bluetooth_tty_driver, &bluetooth_ops);
- if (tty_register_driver (bluetooth_tty_driver)) {
- err("%s - failed to register tty driver", __FUNCTION__);
- put_tty_driver(bluetooth_tty_driver);
- return -1;
- }
-
- /* register the USB driver */
- result = usb_register(&usb_bluetooth_driver);
- if (result < 0) {
- tty_unregister_driver(bluetooth_tty_driver);
- put_tty_driver(bluetooth_tty_driver);
- err("usb_register failed for the USB bluetooth driver. Error number %d", result);
- return -1;
- }
-
- info(DRIVER_DESC " " DRIVER_VERSION);
-
- return 0;
-}
-
-
-static void usb_bluetooth_exit(void)
-{
- usb_deregister(&usb_bluetooth_driver);
- tty_unregister_driver(bluetooth_tty_driver);
- put_tty_driver(bluetooth_tty_driver);
-}
-
-
-module_init(usb_bluetooth_init);
-module_exit(usb_bluetooth_exit);
-
-/* Module information */
-MODULE_AUTHOR( DRIVER_AUTHOR );
-MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 16ecad30e29..1b475141297 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -827,11 +827,10 @@ skip_normal_probe:
return -ENODEV;
}
- if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) {
- dev_dbg(&intf->dev, "out of memory (acm kmalloc)\n");
+ if (!(acm = kzalloc(sizeof(struct acm), GFP_KERNEL))) {
+ dev_dbg(&intf->dev, "out of memory (acm kzalloc)\n");
goto alloc_fail;
}
- memset(acm, 0, sizeof(struct acm));
ctrlsize = le16_to_cpu(epctrl->wMaxPacketSize);
readsize = le16_to_cpu(epread->wMaxPacketSize);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index e195709c9c7..357e75335f1 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -844,9 +844,8 @@ static struct file_operations usblp_fops = {
};
static struct usb_class_driver usblp_class = {
- .name = "usb/lp%d",
+ .name = "lp%d",
.fops = &usblp_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = USBLP_MINOR_BASE,
};
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 1a9ff618494..ff03184da40 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -61,14 +61,17 @@ config USB_DYNAMIC_MINORS
If you are unsure about this, say N here.
config USB_SUSPEND
- bool "USB suspend/resume (EXPERIMENTAL)"
+ bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)"
depends on USB && PM && EXPERIMENTAL
help
If you say Y here, you can use driver calls or the sysfs
"power/state" file to suspend or resume individual USB
- peripherals. There are many related features, such as
- remote wakeup and driver-specific suspend processing, that
- may not yet work as expected.
+ peripherals.
+
+ Also, USB "remote wakeup" signaling is supported, whereby some
+ USB devices (like keyboards and network adapters) can wake up
+ their parent hub. That wakeup cascades up the USB tree, and
+ could wake the system from states like suspend-to-RAM.
If you are unsure about this, say N here.
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index d5503cf0bf7..dd1c4d2a0c3 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -3,7 +3,7 @@
#
usbcore-objs := usb.o hub.o hcd.o urb.o message.o \
- config.o file.o buffer.o sysfs.o devio.o
+ config.o file.o buffer.o sysfs.o devio.o notify.o
ifeq ($(CONFIG_PCI),y)
usbcore-objs += hcd-pci.o
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 99595e07b65..993019500cc 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -112,8 +112,12 @@ void usb_release_interface_cache(struct kref *ref)
struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
int j;
- for (j = 0; j < intfc->num_altsetting; j++)
- kfree(intfc->altsetting[j].endpoint);
+ for (j = 0; j < intfc->num_altsetting; j++) {
+ struct usb_host_interface *alt = &intfc->altsetting[j];
+
+ kfree(alt->endpoint);
+ kfree(alt->string);
+ }
kfree(intfc);
}
@@ -188,10 +192,9 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
}
len = sizeof(struct usb_host_endpoint) * num_ep;
- alt->endpoint = kmalloc(len, GFP_KERNEL);
+ alt->endpoint = kzalloc(len, GFP_KERNEL);
if (!alt->endpoint)
return -ENOMEM;
- memset(alt->endpoint, 0, len);
/* Parse all the endpoint descriptors */
n = 0;
@@ -353,10 +356,9 @@ static int usb_parse_configuration(struct device *ddev, int cfgidx,
}
len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
- config->intf_cache[i] = intfc = kmalloc(len, GFP_KERNEL);
+ config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
if (!intfc)
return -ENOMEM;
- memset(intfc, 0, len);
kref_init(&intfc->ref);
}
@@ -422,8 +424,6 @@ void usb_destroy_configuration(struct usb_device *dev)
struct usb_host_config *cf = &dev->config[c];
kfree(cf->string);
- cf->string = NULL;
-
for (i = 0; i < cf->desc.bNumInterfaces; i++) {
if (cf->intf_cache[i])
kref_put(&cf->intf_cache[i]->ref,
@@ -459,16 +459,14 @@ int usb_get_configuration(struct usb_device *dev)
}
length = ncfg * sizeof(struct usb_host_config);
- dev->config = kmalloc(length, GFP_KERNEL);
+ dev->config = kzalloc(length, GFP_KERNEL);
if (!dev->config)
goto err2;
- memset(dev->config, 0, length);
length = ncfg * sizeof(char *);
- dev->rawdescriptors = kmalloc(length, GFP_KERNEL);
+ dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
if (!dev->rawdescriptors)
goto err2;
- memset(dev->rawdescriptors, 0, length);
buffer = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
if (!buffer)
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index befe0c7f63d..942cd437dc4 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -46,6 +46,7 @@
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/cdev.h>
+#include <linux/notifier.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
#include <linux/moduleparam.h>
@@ -209,10 +210,10 @@ err:
static struct async *alloc_async(unsigned int numisoframes)
{
unsigned int assize = sizeof(struct async) + numisoframes * sizeof(struct usb_iso_packet_descriptor);
- struct async *as = kmalloc(assize, GFP_KERNEL);
+ struct async *as = kzalloc(assize, GFP_KERNEL);
+
if (!as)
return NULL;
- memset(as, 0, assize);
as->urb = usb_alloc_urb(numisoframes, GFP_KERNEL);
if (!as->urb) {
kfree(as);
@@ -279,6 +280,28 @@ static inline struct async *async_getpending(struct dev_state *ps, void __user *
return NULL;
}
+static void snoop_urb(struct urb *urb, void __user *userurb)
+{
+ int j;
+ unsigned char *data = urb->transfer_buffer;
+
+ if (!usbfs_snoop)
+ return;
+
+ if (urb->pipe & USB_DIR_IN)
+ dev_info(&urb->dev->dev, "direction=IN\n");
+ else
+ dev_info(&urb->dev->dev, "direction=OUT\n");
+ dev_info(&urb->dev->dev, "userurb=%p\n", userurb);
+ dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n",
+ urb->transfer_buffer_length);
+ dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length);
+ dev_info(&urb->dev->dev, "data: ");
+ for (j = 0; j < urb->transfer_buffer_length; ++j)
+ printk ("%02x ", data[j]);
+ printk("\n");
+}
+
static void async_completed(struct urb *urb, struct pt_regs *regs)
{
struct async *as = (struct async *)urb->context;
@@ -296,7 +319,9 @@ static void async_completed(struct urb *urb, struct pt_regs *regs)
kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
as->euid);
}
- wake_up(&ps->wait);
+ snoop(&urb->dev->dev, "urb complete\n");
+ snoop_urb(urb, as->userurb);
+ wake_up(&ps->wait);
}
static void destroy_async (struct dev_state *ps, struct list_head *list)
@@ -493,6 +518,23 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig
return ret;
}
+static struct usb_device *usbdev_lookup_minor(int minor)
+{
+ struct class_device *class_dev;
+ struct usb_device *dev = NULL;
+
+ down(&usb_device_class->sem);
+ list_for_each_entry(class_dev, &usb_device_class->children, node) {
+ if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
+ dev = class_dev->class_data;
+ break;
+ }
+ }
+ up(&usb_device_class->sem);
+
+ return dev;
+};
+
/*
* file operations
*/
@@ -601,7 +643,7 @@ static int proc_control(struct dev_state *ps, void __user *arg)
if (usbfs_snoop) {
dev_info(&dev->dev, "control read: data ");
for (j = 0; j < i; ++j)
- printk ("%02x ", (unsigned char)(tbuf)[j]);
+ printk("%02x ", (unsigned char)(tbuf)[j]);
printk("\n");
}
if (copy_to_user(ctrl.data, tbuf, i)) {
@@ -624,7 +666,7 @@ static int proc_control(struct dev_state *ps, void __user *arg)
if (usbfs_snoop) {
dev_info(&dev->dev, "control write: data: ");
for (j = 0; j < ctrl.wLength; ++j)
- printk ("%02x ", (unsigned char)(tbuf)[j]);
+ printk("%02x ", (unsigned char)(tbuf)[j]);
printk("\n");
}
usb_unlock_device(dev);
@@ -649,7 +691,7 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
unsigned int tmo, len1, pipe;
int len2;
unsigned char *tbuf;
- int i, ret;
+ int i, j, ret;
if (copy_from_user(&bulk, arg, sizeof(bulk)))
return -EFAULT;
@@ -674,10 +716,18 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
kfree(tbuf);
return -EINVAL;
}
+ snoop(&dev->dev, "bulk read: len=0x%02x timeout=%04d\n",
+ bulk.len, bulk.timeout);
usb_unlock_device(dev);
i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
usb_lock_device(dev);
if (!i && len2) {
+ if (usbfs_snoop) {
+ dev_info(&dev->dev, "bulk read: data ");
+ for (j = 0; j < len2; ++j)
+ printk("%02x ", (unsigned char)(tbuf)[j]);
+ printk("\n");
+ }
if (copy_to_user(bulk.data, tbuf, len2)) {
kfree(tbuf);
return -EFAULT;
@@ -690,6 +740,14 @@ static int proc_bulk(struct dev_state *ps, void __user *arg)
return -EFAULT;
}
}
+ snoop(&dev->dev, "bulk write: len=0x%02x timeout=%04d\n",
+ bulk.len, bulk.timeout);
+ if (usbfs_snoop) {
+ dev_info(&dev->dev, "bulk write: data: ");
+ for (j = 0; j < len1; ++j)
+ printk("%02x ", (unsigned char)(tbuf)[j]);
+ printk("\n");
+ }
usb_unlock_device(dev);
i = usb_bulk_msg(dev, pipe, tbuf, len1, &len2, tmo);
usb_lock_device(dev);
@@ -835,7 +893,6 @@ static int proc_setconfig(struct dev_state *ps, void __user *arg)
return status;
}
-
static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
struct usbdevfs_iso_packet_desc __user *iso_frame_desc,
void __user *arg)
@@ -896,6 +953,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
kfree(dr);
return -EFAULT;
}
+ snoop(&ps->dev->dev, "control urb\n");
break;
case USBDEVFS_URB_TYPE_BULK:
@@ -910,6 +968,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
return -EINVAL;
if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
return -EFAULT;
+ snoop(&ps->dev->dev, "bulk urb\n");
break;
case USBDEVFS_URB_TYPE_ISO:
@@ -939,6 +998,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
return -EINVAL;
}
uurb->buffer_length = totlen;
+ snoop(&ps->dev->dev, "iso urb\n");
break;
case USBDEVFS_URB_TYPE_INTERRUPT:
@@ -954,6 +1014,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
return -EINVAL;
if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
return -EFAULT;
+ snoop(&ps->dev->dev, "interrupt urb\n");
break;
default:
@@ -1003,6 +1064,8 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
return -EFAULT;
}
}
+ snoop(&as->urb->dev->dev, "submit urb\n");
+ snoop_urb(as->urb, as->userurb);
async_newpending(as);
if ((ret = usb_submit_urb(as->urb, GFP_KERNEL))) {
dev_printk(KERN_DEBUG, &ps->dev->dev, "usbfs: usb_submit_urb returned %d\n", ret);
@@ -1238,23 +1301,20 @@ static int proc_releaseinterface(struct dev_state *ps, void __user *arg)
return 0;
}
-static int proc_ioctl (struct dev_state *ps, void __user *arg)
+static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
{
- struct usbdevfs_ioctl ctrl;
int size;
void *buf = NULL;
int retval = 0;
struct usb_interface *intf = NULL;
struct usb_driver *driver = NULL;
- /* get input parameters and alloc buffer */
- if (copy_from_user(&ctrl, arg, sizeof (ctrl)))
- return -EFAULT;
- if ((size = _IOC_SIZE (ctrl.ioctl_code)) > 0) {
+ /* alloc buffer */
+ if ((size = _IOC_SIZE (ctl->ioctl_code)) > 0) {
if ((buf = kmalloc (size, GFP_KERNEL)) == NULL)
return -ENOMEM;
- if ((_IOC_DIR(ctrl.ioctl_code) & _IOC_WRITE)) {
- if (copy_from_user (buf, ctrl.data, size)) {
+ if ((_IOC_DIR(ctl->ioctl_code) & _IOC_WRITE)) {
+ if (copy_from_user (buf, ctl->data, size)) {
kfree(buf);
return -EFAULT;
}
@@ -1270,9 +1330,9 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
if (ps->dev->state != USB_STATE_CONFIGURED)
retval = -EHOSTUNREACH;
- else if (!(intf = usb_ifnum_to_if (ps->dev, ctrl.ifno)))
+ else if (!(intf = usb_ifnum_to_if (ps->dev, ctl->ifno)))
retval = -EINVAL;
- else switch (ctrl.ioctl_code) {
+ else switch (ctl->ioctl_code) {
/* disconnect kernel driver from interface */
case USBDEVFS_DISCONNECT:
@@ -1304,7 +1364,7 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
if (driver == NULL || driver->ioctl == NULL) {
retval = -ENOTTY;
} else {
- retval = driver->ioctl (intf, ctrl.ioctl_code, buf);
+ retval = driver->ioctl (intf, ctl->ioctl_code, buf);
if (retval == -ENOIOCTLCMD)
retval = -ENOTTY;
}
@@ -1313,15 +1373,42 @@ static int proc_ioctl (struct dev_state *ps, void __user *arg)
/* cleanup and return */
if (retval >= 0
- && (_IOC_DIR (ctrl.ioctl_code) & _IOC_READ) != 0
+ && (_IOC_DIR (ctl->ioctl_code) & _IOC_READ) != 0
&& size > 0
- && copy_to_user (ctrl.data, buf, size) != 0)
+ && copy_to_user (ctl->data, buf, size) != 0)
retval = -EFAULT;
kfree(buf);
return retval;
}
+static int proc_ioctl_default(struct dev_state *ps, void __user *arg)
+{
+ struct usbdevfs_ioctl ctrl;
+
+ if (copy_from_user(&ctrl, arg, sizeof (ctrl)))
+ return -EFAULT;
+ return proc_ioctl(ps, &ctrl);
+}
+
+#ifdef CONFIG_COMPAT
+static int proc_ioctl_compat(struct dev_state *ps, void __user *arg)
+{
+ struct usbdevfs_ioctl32 __user *uioc;
+ struct usbdevfs_ioctl ctrl;
+ u32 udata;
+
+ uioc = compat_ptr(arg);
+ if (get_user(ctrl.ifno, &uioc->ifno) ||
+ get_user(ctrl.ioctl_code, &uioc->ioctl_code) ||
+ __get_user(udata, &uioc->data))
+ return -EFAULT;
+ ctrl.data = compat_ptr(udata);
+
+ return proc_ioctl(ps, &ctrl);
+}
+#endif
+
/*
* NOTE: All requests here that have interface numbers as parameters
* are assuming that somehow the configuration has been prevented from
@@ -1422,6 +1509,10 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
ret = proc_reapurbnonblock_compat(ps, p);
break;
+ case USBDEVFS_IOCTL32:
+ snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
+ ret = proc_ioctl_compat(ps, p);
+ break;
#endif
case USBDEVFS_DISCARDURB:
@@ -1456,7 +1547,7 @@ static int usbdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd
case USBDEVFS_IOCTL:
snoop(&dev->dev, "%s: IOCTL\n", __FUNCTION__);
- ret = proc_ioctl(ps, p);
+ ret = proc_ioctl_default(ps, p);
break;
}
usb_unlock_device(dev);
@@ -1488,24 +1579,7 @@ struct file_operations usbfs_device_file_operations = {
.release = usbdev_release,
};
-struct usb_device *usbdev_lookup_minor(int minor)
-{
- struct class_device *class_dev;
- struct usb_device *dev = NULL;
-
- down(&usb_device_class->sem);
- list_for_each_entry(class_dev, &usb_device_class->children, node) {
- if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
- dev = class_dev->class_data;
- break;
- }
- }
- up(&usb_device_class->sem);
-
- return dev;
-};
-
-void usbdev_add(struct usb_device *dev)
+static void usbdev_add(struct usb_device *dev)
{
int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
@@ -1516,11 +1590,29 @@ void usbdev_add(struct usb_device *dev)
dev->class_dev->class_data = dev;
}
-void usbdev_remove(struct usb_device *dev)
+static void usbdev_remove(struct usb_device *dev)
{
class_device_unregister(dev->class_dev);
}
+static int usbdev_notify(struct notifier_block *self, unsigned long action,
+ void *dev)
+{
+ switch (action) {
+ case USB_DEVICE_ADD:
+ usbdev_add(dev);
+ break;
+ case USB_DEVICE_REMOVE:
+ usbdev_remove(dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block usbdev_nb = {
+ .notifier_call = usbdev_notify,
+};
+
static struct cdev usb_device_cdev = {
.kobj = {.name = "usb_device", },
.owner = THIS_MODULE,
@@ -1540,24 +1632,32 @@ int __init usbdev_init(void)
retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX);
if (retval) {
err("unable to get usb_device major %d", USB_DEVICE_MAJOR);
- unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
- goto out;
+ goto error_cdev;
}
usb_device_class = class_create(THIS_MODULE, "usb_device");
if (IS_ERR(usb_device_class)) {
err("unable to register usb_device class");
retval = PTR_ERR(usb_device_class);
- usb_device_class = NULL;
- cdev_del(&usb_device_cdev);
- unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+ goto error_class;
}
+ usb_register_notify(&usbdev_nb);
+
out:
return retval;
+
+error_class:
+ usb_device_class = NULL;
+ cdev_del(&usb_device_cdev);
+
+error_cdev:
+ unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
+ goto out;
}
void usbdev_cleanup(void)
{
+ usb_unregister_notify(&usbdev_nb);
class_destroy(usb_device_class);
cdev_del(&usb_device_cdev);
unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 78cb4be9529..e695308095a 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -17,7 +17,6 @@
#include <linux/config.h>
#include <linux/module.h>
-#include <linux/devfs_fs_kernel.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
@@ -88,8 +87,6 @@ int usb_major_init(void)
goto out;
}
- devfs_mk_dir("usb");
-
out:
return error;
}
@@ -97,7 +94,6 @@ out:
void usb_major_cleanup(void)
{
class_destroy(usb_class);
- devfs_remove("usb");
unregister_chrdev(USB_MAJOR, "usb");
}
@@ -112,8 +108,7 @@ void usb_major_cleanup(void)
* enabled, the minor number will be based on the next available free minor,
* starting at the class_driver->minor_base.
*
- * This function also creates the devfs file for the usb device, if devfs
- * is enabled, and creates a usb class device in the sysfs tree.
+ * This function also creates a usb class device in the sysfs tree.
*
* usb_deregister_dev() must be called when the driver is done with
* the minor numbers given out by this function.
@@ -162,11 +157,8 @@ int usb_register_dev(struct usb_interface *intf,
intf->minor = minor;
- /* handle the devfs registration */
- snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base);
- devfs_mk_cdev(MKDEV(USB_MAJOR, minor), class_driver->mode, name);
-
/* create a usb class device for this usb interface */
+ snprintf(name, BUS_ID_SIZE, class_driver->name, minor - minor_base);
temp = strrchr(name, '/');
if (temp && (temp[1] != 0x00))
++temp;
@@ -179,7 +171,6 @@ int usb_register_dev(struct usb_interface *intf,
spin_lock (&minor_lock);
usb_minors[intf->minor] = NULL;
spin_unlock (&minor_lock);
- devfs_remove (name);
retval = PTR_ERR(intf->class_dev);
}
exit:
@@ -197,9 +188,8 @@ EXPORT_SYMBOL(usb_register_dev);
* call to usb_register_dev() (usually when the device is disconnected
* from the system.)
*
- * This function also cleans up the devfs file for the usb device, if devfs
- * is enabled, and removes the usb class device from the sysfs tree.
- *
+ * This function also removes the usb class device from the sysfs tree.
+ *
* This should be called by all drivers that use the USB major number.
*/
void usb_deregister_dev(struct usb_interface *intf,
@@ -222,7 +212,6 @@ void usb_deregister_dev(struct usb_interface *intf,
spin_unlock (&minor_lock);
snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
- devfs_remove (name);
class_device_destroy(usb_class, MKDEV(USB_MAJOR, intf->minor));
intf->class_dev = NULL;
intf->minor = -1;
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 6385d1a99b6..84d9e69329b 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -30,6 +30,8 @@
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/usb.h>
+
+#include "usb.h"
#include "hcd.h"
@@ -197,6 +199,26 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
hcd = pci_get_drvdata(dev);
+ /* Root hub suspend should have stopped all downstream traffic,
+ * and all bus master traffic. And done so for both the interface
+ * and the stub usb_device (which we check here). But maybe it
+ * didn't; writing sysfs power/state files ignores such rules...
+ *
+ * We must ignore the FREEZE vs SUSPEND distinction here, because
+ * otherwise the swsusp will save (and restore) garbage state.
+ */
+ if (hcd->self.root_hub->dev.power.power_state.event == PM_EVENT_ON)
+ return -EBUSY;
+
+ if (hcd->driver->suspend) {
+ retval = hcd->driver->suspend(hcd, message);
+ if (retval) {
+ dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
+ retval);
+ goto done;
+ }
+ }
+
/* FIXME until the generic PM interfaces change a lot more, this
* can't use PCI D1 and D2 states. For example, the confusion
* between messages and states will need to vanish, and messages
@@ -215,31 +237,13 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
*/
has_pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- switch (hcd->state) {
-
- /* entry if root hub wasn't yet suspended ... from sysfs,
- * without autosuspend, or if USB_SUSPEND isn't configured.
+ /* Downstream ports from this root hub should already be quiesced, so
+ * there will be no DMA activity. Now we can shut down the upstream
+ * link (except maybe for PME# resume signaling) and enter some PCI
+ * low power state, if the hardware allows.
*/
- case HC_STATE_RUNNING:
- hcd->state = HC_STATE_QUIESCING;
- retval = hcd->driver->suspend (hcd, message);
- if (retval) {
- dev_dbg (hcd->self.controller,
- "suspend fail, retval %d\n",
- retval);
- break;
- }
- hcd->state = HC_STATE_SUSPENDED;
- /* FALLTHROUGH */
+ if (hcd->state == HC_STATE_SUSPENDED) {
- /* entry with CONFIG_USB_SUSPEND, or hcds that autosuspend: the
- * controller and/or root hub will already have been suspended,
- * but it won't be ready for a PCI resume call.
- *
- * FIXME only CONFIG_USB_SUSPEND guarantees hub_suspend() will
- * have been called, otherwise root hub timers still run ...
- */
- case HC_STATE_SUSPENDED:
/* no DMA or IRQs except when HC is active */
if (dev->current_state == PCI_D0) {
pci_save_state (dev);
@@ -248,7 +252,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
if (!has_pci_pm) {
dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n");
- break;
+ goto done;
}
/* NOTE: dev->current_state becomes nonzero only here, and
@@ -259,28 +263,29 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
retval = pci_set_power_state (dev, PCI_D3hot);
if (retval == 0) {
dev_dbg (hcd->self.controller, "--> PCI D3\n");
- retval = pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
- if (retval)
- break;
- retval = pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
- } else if (retval < 0) {
+
+ /* Ignore these return values. We rely on pci code to
+ * reject requests the hardware can't implement, rather
+ * than coding the same thing.
+ */
+ (void) pci_enable_wake (dev, PCI_D3hot, hcd->remote_wakeup);
+ (void) pci_enable_wake (dev, PCI_D3cold, hcd->remote_wakeup);
+ } else {
dev_dbg (&dev->dev, "PCI D3 suspend fail, %d\n",
retval);
(void) usb_hcd_pci_resume (dev);
- break;
}
- break;
- default:
+
+ } else {
dev_dbg (hcd->self.controller, "hcd state %d; not suspended\n",
hcd->state);
WARN_ON(1);
retval = -EINVAL;
- break;
}
- /* update power_state **ONLY** to make sysfs happier */
+done:
if (retval == 0)
- dev->dev.power.power_state = message;
+ dev->dev.power.power_state = PMSG_SUSPEND;
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_suspend);
@@ -336,20 +341,9 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
dev->current_state);
}
#endif
- retval = pci_enable_wake (dev, dev->current_state, 0);
- if (retval) {
- dev_err(hcd->self.controller,
- "can't enable_wake to %d, %d!\n",
- dev->current_state, retval);
- return retval;
- }
- retval = pci_enable_wake (dev, PCI_D3cold, 0);
- if (retval) {
- dev_err(hcd->self.controller,
- "can't enable_wake to %d, %d!\n",
- PCI_D3cold, retval);
- return retval;
- }
+ /* yes, ignore these results too... */
+ (void) pci_enable_wake (dev, dev->current_state, 0);
+ (void) pci_enable_wake (dev, PCI_D3cold, 0);
} else {
/* Same basic cases: clean (powered/not), dirty */
dev_dbg(hcd->self.controller, "PCI legacy resume\n");
@@ -371,17 +365,17 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
dev->dev.power.power_state = PMSG_ON;
- hcd->state = HC_STATE_RESUMING;
hcd->saw_irq = 0;
- retval = hcd->driver->resume (hcd);
- if (!HC_IS_RUNNING (hcd->state)) {
- dev_dbg (hcd->self.controller,
- "resume fail, retval %d\n", retval);
- usb_hc_died (hcd);
+ if (hcd->driver->resume) {
+ retval = hcd->driver->resume(hcd);
+ if (retval) {
+ dev_err (hcd->self.controller,
+ "PCI post-resume error %d!\n", retval);
+ usb_hc_died (hcd);
+ }
}
- retval = pci_enable_device(dev);
return retval;
}
EXPORT_SYMBOL (usb_hcd_pci_resume);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 14c47a10da8..6c7ca5b08cd 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -130,7 +130,7 @@ static const u8 usb2_rh_dev_descriptor [18] = {
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
@@ -153,7 +153,7 @@ static const u8 usb11_rh_dev_descriptor [18] = {
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
0x00, 0x00, /* __le16 idVendor; */
0x00, 0x00, /* __le16 idProduct; */
@@ -458,22 +458,18 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
default:
/* non-generic request */
- if (HC_IS_SUSPENDED (hcd->state))
- status = -EAGAIN;
- else {
- switch (typeReq) {
- case GetHubStatus:
- case GetPortStatus:
- len = 4;
- break;
- case GetHubDescriptor:
- len = sizeof (struct usb_hub_descriptor);
- break;
- }
- status = hcd->driver->hub_control (hcd,
- typeReq, wValue, wIndex,
- tbuf, wLength);
+ switch (typeReq) {
+ case GetHubStatus:
+ case GetPortStatus:
+ len = 4;
+ break;
+ case GetHubDescriptor:
+ len = sizeof (struct usb_hub_descriptor);
+ break;
}
+ status = hcd->driver->hub_control (hcd,
+ typeReq, wValue, wIndex,
+ tbuf, wLength);
break;
error:
/* "protocol stall" on error */
@@ -487,7 +483,7 @@ error:
"CTRL: TypeReq=0x%x val=0x%x "
"idx=0x%x len=%d ==> %d\n",
typeReq, wValue, wIndex,
- wLength, urb->status);
+ wLength, status);
}
}
if (len) {
@@ -748,10 +744,9 @@ struct usb_bus *usb_alloc_bus (struct usb_operations *op)
{
struct usb_bus *bus;
- bus = kmalloc (sizeof *bus, GFP_KERNEL);
+ bus = kzalloc (sizeof *bus, GFP_KERNEL);
if (!bus)
return NULL;
- memset(bus, 0, sizeof(struct usb_bus));
usb_bus_init (bus);
bus->op = op;
return bus;
@@ -796,8 +791,7 @@ static int usb_register_bus(struct usb_bus *bus)
list_add (&bus->bus_list, &usb_bus_list);
up (&usb_bus_list_lock);
- usbfs_add_bus (bus);
- usbmon_notify_bus_add (bus);
+ usb_notify_add_bus(bus);
dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
return 0;
@@ -824,8 +818,7 @@ static void usb_deregister_bus (struct usb_bus *bus)
list_del (&bus->bus_list);
up (&usb_bus_list_lock);
- usbmon_notify_bus_remove (bus);
- usbfs_remove_bus (bus);
+ usb_notify_remove_bus(bus);
clear_bit (bus->busnum, busmap.busmap);
@@ -1143,10 +1136,20 @@ static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
else switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
+doit:
usb_get_dev (urb->dev);
list_add_tail (&urb->urb_list, &ep->urb_list);
status = 0;
break;
+ case HC_STATE_SUSPENDED:
+ /* HC upstream links (register access, wakeup signaling) can work
+ * even when the downstream links (and DMA etc) are quiesced; let
+ * usbcore talk to the root hub.
+ */
+ if (hcd->self.controller->power.power_state.event == PM_EVENT_ON
+ && urb->dev->parent == NULL)
+ goto doit;
+ /* FALL THROUGH */
default:
status = -ESHUTDOWN;
break;
@@ -1294,12 +1297,6 @@ static int hcd_unlink_urb (struct urb *urb, int status)
goto done;
}
- /* running ~= hc unlink handshake works (irq, timer, etc)
- * halted ~= no unlink handshake is needed
- * suspended, resuming == should never happen
- */
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT);
-
/* insist the urb is still queued */
list_for_each(tmp, &ep->urb_list) {
if (tmp == &urb->urb_list)
@@ -1431,28 +1428,92 @@ rescan:
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_USB_SUSPEND
+#ifdef CONFIG_PM
-static int hcd_hub_suspend (struct usb_bus *bus)
+int hcd_bus_suspend (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_suspend)
- return hcd->driver->hub_suspend (hcd);
- return 0;
+ if (!hcd->driver->bus_suspend)
+ return -ENOENT;
+ hcd->state = HC_STATE_QUIESCING;
+ status = hcd->driver->bus_suspend (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_SUSPENDED;
+ else
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "suspend", status);
+ return status;
}
-static int hcd_hub_resume (struct usb_bus *bus)
+int hcd_bus_resume (struct usb_bus *bus)
{
struct usb_hcd *hcd;
+ int status;
hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_resume)
- return hcd->driver->hub_resume (hcd);
- return 0;
+ if (!hcd->driver->bus_resume)
+ return -ENOENT;
+ if (hcd->state == HC_STATE_RUNNING)
+ return 0;
+ hcd->state = HC_STATE_RESUMING;
+ status = hcd->driver->bus_resume (hcd);
+ if (status == 0)
+ hcd->state = HC_STATE_RUNNING;
+ else {
+ dev_dbg(&bus->root_hub->dev, "%s fail, err %d\n",
+ "resume", status);
+ usb_hc_died(hcd);
+ }
+ return status;
}
+/*
+ * usb_hcd_suspend_root_hub - HCD autosuspends downstream ports
+ * @hcd: host controller for this root hub
+ *
+ * This call arranges that usb_hcd_resume_root_hub() is safe to call later;
+ * that the HCD's root hub polling is deactivated; and that the root's hub
+ * driver is suspended. HCDs may call this to autosuspend when their root
+ * hub's downstream ports are all inactive: unpowered, disconnected,
+ * disabled, or suspended.
+ *
+ * The HCD will autoresume on device connect change detection (using SRP
+ * or a D+/D- pullup). The HCD also autoresumes on remote wakeup signaling
+ * from any ports that are suspended (if that is enabled). In most cases,
+ * overcurrent signaling (on powered ports) will also start autoresume.
+ *
+ * Always called with IRQs blocked.
+ */
+void usb_hcd_suspend_root_hub (struct usb_hcd *hcd)
+{
+ struct urb *urb;
+
+ spin_lock (&hcd_root_hub_lock);
+ usb_suspend_root_hub (hcd->self.root_hub);
+
+ /* force status urb to complete/unlink while suspended */
+ if (hcd->status_urb) {
+ urb = hcd->status_urb;
+ urb->status = -ECONNRESET;
+ urb->hcpriv = NULL;
+ urb->actual_length = 0;
+
+ del_timer (&hcd->rh_timer);
+ hcd->poll_pending = 0;
+ hcd->status_urb = NULL;
+ } else
+ urb = NULL;
+ spin_unlock (&hcd_root_hub_lock);
+ hcd->state = HC_STATE_SUSPENDED;
+
+ if (urb)
+ usb_hcd_giveback_urb (hcd, urb, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_suspend_root_hub);
+
/**
* usb_hcd_resume_root_hub - called by HCD to resume its root hub
* @hcd: host controller for this root hub
@@ -1460,7 +1521,7 @@ static int hcd_hub_resume (struct usb_bus *bus)
* The USB host controller calls this function when its root hub is
* suspended (with the remote wakeup feature enabled) and a remote
* wakeup request is received. It queues a request for khubd to
- * resume the root hub.
+ * resume the root hub (that is, manage its downstream ports again).
*/
void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
{
@@ -1471,13 +1532,9 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
usb_resume_root_hub (hcd->self.root_hub);
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
+EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
-#else
-void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
-{
-}
#endif
-EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
/*-------------------------------------------------------------------------*/
@@ -1530,10 +1587,6 @@ static struct usb_operations usb_hcd_operations = {
.buffer_alloc = hcd_buffer_alloc,
.buffer_free = hcd_buffer_free,
.disable = hcd_endpoint_disable,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = hcd_hub_suspend,
- .hub_resume = hcd_hub_resume,
-#endif
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 1f1ed6211af..24a62a2ff86 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -154,10 +154,6 @@ struct usb_operations {
void (*disable)(struct usb_device *udev,
struct usb_host_endpoint *ep);
-
- /* global suspend/resume of bus */
- int (*hub_suspend)(struct usb_bus *);
- int (*hub_resume)(struct usb_bus *);
};
/* each driver provides one of these, and hardware init support */
@@ -182,12 +178,12 @@ struct hc_driver {
int (*start) (struct usb_hcd *hcd);
/* NOTE: these suspend/resume calls relate to the HC as
- * a whole, not just the root hub; they're for bus glue.
+ * a whole, not just the root hub; they're for PCI bus glue.
*/
- /* called after all devices were suspended */
+ /* called after suspending the hub, before entering D3 etc */
int (*suspend) (struct usb_hcd *hcd, pm_message_t message);
- /* called before any devices get resumed */
+ /* called after entering D0 (etc), before resuming the hub */
int (*resume) (struct usb_hcd *hcd);
/* cleanly make HCD stop writing memory and doing I/O */
@@ -212,8 +208,8 @@ struct hc_driver {
int (*hub_control) (struct usb_hcd *hcd,
u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
- int (*hub_suspend)(struct usb_hcd *);
- int (*hub_resume)(struct usb_hcd *);
+ int (*bus_suspend)(struct usb_hcd *);
+ int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
void (*hub_irq_enable)(struct usb_hcd *);
/* Needed only if port-change IRQs are level-triggered */
@@ -355,8 +351,6 @@ extern long usb_calc_bus_time (int speed, int is_input,
extern struct usb_bus *usb_alloc_bus (struct usb_operations *);
-extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
-
extern void usb_set_device_state(struct usb_device *udev,
enum usb_device_state new_state);
@@ -378,6 +372,33 @@ extern int usb_find_interface_driver (struct usb_device *dev,
#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
+#ifdef CONFIG_PM
+extern void usb_hcd_suspend_root_hub (struct usb_hcd *hcd);
+extern void usb_hcd_resume_root_hub (struct usb_hcd *hcd);
+extern int hcd_bus_suspend (struct usb_bus *bus);
+extern int hcd_bus_resume (struct usb_bus *bus);
+#else
+static inline void usb_hcd_suspend_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+
+static inline int hcd_bus_suspend(struct usb_bus *bus)
+{
+ return 0;
+}
+
+static inline int hcd_bus_resume (struct usb_bus *bus)
+{
+ return 0;
+}
+#endif /* CONFIG_PM */
+
/*
* USB device fs stuff
*/
@@ -388,23 +409,13 @@ extern int usb_find_interface_driver (struct usb_device *dev,
* these are expected to be called from the USB core/hub thread
* with the kernel lock held
*/
-extern void usbfs_add_bus(struct usb_bus *bus);
-extern void usbfs_remove_bus(struct usb_bus *bus);
-extern void usbfs_add_device(struct usb_device *dev);
-extern void usbfs_remove_device(struct usb_device *dev);
extern void usbfs_update_special (void);
-
extern int usbfs_init(void);
extern void usbfs_cleanup(void);
#else /* CONFIG_USB_DEVICEFS */
-static inline void usbfs_add_bus(struct usb_bus *bus) {}
-static inline void usbfs_remove_bus(struct usb_bus *bus) {}
-static inline void usbfs_add_device(struct usb_device *dev) {}
-static inline void usbfs_remove_device(struct usb_device *dev) {}
static inline void usbfs_update_special (void) {}
-
static inline int usbfs_init(void) { return 0; }
static inline void usbfs_cleanup(void) { }
@@ -419,8 +430,6 @@ struct usb_mon_operations {
void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
void (*urb_complete)(struct usb_bus *bus, struct urb *urb);
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
- void (*bus_add)(struct usb_bus *bus);
- void (*bus_remove)(struct usb_bus *bus);
};
extern struct usb_mon_operations *mon_ops;
@@ -443,18 +452,6 @@ static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb)
if (bus->monitored)
(*mon_ops->urb_complete)(bus, urb);
}
-
-static inline void usbmon_notify_bus_add(struct usb_bus *bus)
-{
- if (mon_ops)
- (*mon_ops->bus_add)(bus);
-}
-
-static inline void usbmon_notify_bus_remove(struct usb_bus *bus)
-{
- if (mon_ops)
- (*mon_ops->bus_remove)(bus);
-}
int usb_mon_register(struct usb_mon_operations *ops);
void usb_mon_deregister(void);
@@ -465,8 +462,6 @@ static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
int error) {}
static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb) {}
-static inline void usbmon_notify_bus_add(struct usb_bus *bus) {}
-static inline void usbmon_notify_bus_remove(struct usb_bus *bus) {}
#endif /* CONFIG_USB_MON */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c3e2024c434..256d9f69871 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -436,9 +436,10 @@ static void hub_power_on(struct usb_hub *hub)
{
int port1;
unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
/* if hub supports power switching, enable power on each port */
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
dev_dbg(hub->intfdev, "enabling power on all ports\n");
for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
set_port_feature(hub->hdev, port1,
@@ -449,10 +450,18 @@ static void hub_power_on(struct usb_hub *hub)
msleep(max(pgood_delay, (unsigned) 100));
}
-static void hub_quiesce(struct usb_hub *hub)
+static inline void __hub_quiesce(struct usb_hub *hub)
{
- /* stop khubd and related activity */
+ /* (nonblocking) khubd and related activity won't re-trigger */
hub->quiescing = 1;
+ hub->activating = 0;
+ hub->resume_root_hub = 0;
+}
+
+static void hub_quiesce(struct usb_hub *hub)
+{
+ /* (blocking) stop khubd and related activity */
+ __hub_quiesce(hub);
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
@@ -466,6 +475,7 @@ static void hub_activate(struct usb_hub *hub)
hub->quiescing = 0;
hub->activating = 1;
+ hub->resume_root_hub = 0;
status = usb_submit_urb(hub->urb, GFP_NOIO);
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
@@ -516,6 +526,7 @@ static int hub_configure(struct usb_hub *hub,
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
u16 hubstatus, hubchange;
+ u16 wHubCharacteristics;
unsigned int pipe;
int maxp, ret;
char *message;
@@ -561,9 +572,9 @@ static int hub_configure(struct usb_hub *hub,
dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
(hdev->maxchild == 1) ? "" : "s");
- le16_to_cpus(&hub->descriptor->wHubCharacteristics);
+ wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_COMPOUND) {
+ if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
int i;
char portstr [USB_MAXCHILDREN + 1];
@@ -576,7 +587,7 @@ static int hub_configure(struct usb_hub *hub,
} else
dev_dbg(hub_dev, "standalone hub\n");
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) {
+ switch (wHubCharacteristics & HUB_CHAR_LPSM) {
case 0x00:
dev_dbg(hub_dev, "ganged power switching\n");
break;
@@ -589,7 +600,7 @@ static int hub_configure(struct usb_hub *hub,
break;
}
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) {
+ switch (wHubCharacteristics & HUB_CHAR_OCPM) {
case 0x00:
dev_dbg(hub_dev, "global over-current protection\n");
break;
@@ -629,7 +640,7 @@ static int hub_configure(struct usb_hub *hub,
}
/* Note 8 FS bit times == (8 bits / 12000000 bps) ~= 666ns */
- switch (hub->descriptor->wHubCharacteristics & HUB_CHAR_TTTT) {
+ switch (wHubCharacteristics & HUB_CHAR_TTTT) {
case HUB_TTTT_8_BITS:
if (hdev->descriptor.bDeviceProtocol != 0) {
hub->tt.think_time = 666;
@@ -659,7 +670,7 @@ static int hub_configure(struct usb_hub *hub,
}
/* probe() zeroes hub->indicator[] */
- if (hub->descriptor->wHubCharacteristics & HUB_CHAR_PORTIND) {
+ if (wHubCharacteristics & HUB_CHAR_PORTIND) {
hub->has_indicators = 1;
dev_dbg(hub_dev, "Port indicators are supported\n");
}
@@ -704,7 +715,7 @@ static int hub_configure(struct usb_hub *hub,
(hubstatus & HUB_STATUS_LOCAL_POWER)
? "lost (inactive)" : "good");
- if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_OCPM) == 0)
+ if ((wHubCharacteristics & HUB_CHAR_OCPM) == 0)
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
@@ -854,14 +865,12 @@ descriptor_error:
/* We found a hub */
dev_info (&intf->dev, "USB hub found\n");
- hub = kmalloc(sizeof(*hub), GFP_KERNEL);
+ hub = kzalloc(sizeof(*hub), GFP_KERNEL);
if (!hub) {
dev_dbg (&intf->dev, "couldn't kmalloc hub struct\n");
return -ENOMEM;
}
- memset(hub, 0, sizeof(*hub));
-
INIT_LIST_HEAD(&hub->event_list);
hub->intfdev = &intf->dev;
hub->hdev = hdev;
@@ -1117,14 +1126,14 @@ void usb_disconnect(struct usb_device **pdev)
*/
usb_disable_device(udev, 0);
+ usb_notify_remove_device(udev);
+
/* Free the device number, remove the /proc/bus/usb entry and
* the sysfs attributes, and delete the parent's children[]
* (or root_hub) pointer.
*/
dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
- usbfs_remove_device(udev);
- usbdev_remove(udev);
usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
@@ -1195,21 +1204,6 @@ static inline void show_string(struct usb_device *udev, char *id, char *string)
{}
#endif
-static void get_string(struct usb_device *udev, char **string, int index)
-{
- char *buf;
-
- if (!index)
- return;
- buf = kmalloc(256, GFP_KERNEL);
- if (!buf)
- return;
- if (usb_string(udev, index, buf, 256) > 0)
- *string = buf;
- else
- kfree(buf);
-}
-
#ifdef CONFIG_USB_OTG
#include "otg_whitelist.h"
@@ -1248,9 +1242,10 @@ int usb_new_device(struct usb_device *udev)
}
/* read the standard strings and cache them if present */
- get_string(udev, &udev->product, udev->descriptor.iProduct);
- get_string(udev, &udev->manufacturer, udev->descriptor.iManufacturer);
- get_string(udev, &udev->serial, udev->descriptor.iSerialNumber);
+ udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+ udev->manufacturer = usb_cache_string(udev,
+ udev->descriptor.iManufacturer);
+ udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
/* Tell the world! */
dev_dbg(&udev->dev, "new device strings: Mfr=%d, Product=%d, "
@@ -1322,11 +1317,9 @@ int usb_new_device(struct usb_device *udev)
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_suspend_device (struct usb_device *,
- int port1, pm_message_t state);
- err = __usb_suspend_device(udev,
- udev->bus->otg_port,
- PMSG_SUSPEND);
+ static int __usb_suspend_device(struct usb_device *,
+ int port1);
+ err = __usb_suspend_device(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
@@ -1362,10 +1355,8 @@ int usb_new_device(struct usb_device *udev)
}
/* USB device state == configured ... usable */
+ usb_notify_add_device(udev);
- /* add a /proc/bus/usb entry */
- usbdev_add(udev);
- usbfs_add_device(udev);
return 0;
fail:
@@ -1516,7 +1507,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
/* FIXME let caller ask to power down the port:
* - some devices won't enumerate without a VBUS power cycle
* - SRP saves power that way
- * - usb_suspend_device(dev, PMSG_SUSPEND)
+ * - ... new call, TBD ...
* That's easy if this hub can switch power per-port, and
* khubd reactivates the port later (timer, SRP, etc).
* Powerdown must be optional, because of reset/DFU.
@@ -1598,11 +1589,14 @@ static int hub_port_suspend(struct usb_hub *hub, int port1,
* Other than re-initializing the hub (plug/unplug, except for root hubs),
* Linux (2.6) currently has NO mechanisms to initiate that: no khubd
* timer, no SRP, no requests through sysfs.
+ *
+ * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when
+ * the root hub for their bus goes into global suspend ... so we don't
+ * (falsely) update the device power state to say it suspended.
*/
-static int __usb_suspend_device (struct usb_device *udev, int port1,
- pm_message_t state)
+static int __usb_suspend_device (struct usb_device *udev, int port1)
{
- int status;
+ int status = 0;
/* caller owns the udev device lock */
if (port1 < 0)
@@ -1613,95 +1607,39 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
return 0;
}
- /* suspend interface drivers; if this is a hub, it
- * suspends the child devices
- */
+ /* all interfaces must already be suspended */
if (udev->actconfig) {
int i;
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *intf;
- struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (state.event <= intf->dev.power.power_state.event)
- continue;
- if (!intf->dev.driver)
- continue;
- driver = to_usb_driver(intf->dev.driver);
-
- if (driver->suspend) {
- status = driver->suspend(intf, state);
- if (intf->dev.power.power_state.event != state.event
- || status)
- dev_err(&intf->dev,
- "suspend %d fail, code %d\n",
- state.event, status);
- }
-
- /* only drivers with suspend() can ever resume();
- * and after power loss, even they won't.
- * bus_rescan_devices() can rebind drivers later.
- *
- * FIXME the PM core self-deadlocks when unbinding
- * drivers during suspend/resume ... everything grabs
- * dpm_sem (not a spinlock, ugh). we want to unbind,
- * since we know every driver's probe/disconnect works
- * even for drivers that can't suspend.
- */
- if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
-#if 1
- dev_warn(&intf->dev, "resume is unsafe!\n");
-#else
- down_write(&usb_bus_type.rwsem);
- device_release_driver(&intf->dev);
- up_write(&usb_bus_type.rwsem);
-#endif
+ if (is_active(intf)) {
+ dev_dbg(&intf->dev, "nyet suspended\n");
+ return -EBUSY;
}
}
}
- /*
- * FIXME this needs port power off call paths too, to help force
- * USB into the "generic" PM model. At least for devices on
- * ports that aren't using ganged switching (usually root hubs).
- *
- * NOTE: SRP-capable links should adopt more aggressive poweroff
- * policies (when HNP doesn't apply) once we have mechanisms to
- * turn power back on! (Likely not before 2.7...)
+ /* we only change a device's upstream USB link.
+ * root hubs have no upstream USB link.
*/
- if (state.event > PM_EVENT_FREEZE) {
- dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
- }
-
- /* "global suspend" of the HC-to-USB interface (root hub), or
- * "selective suspend" of just one hub-device link.
- */
- if (!udev->parent) {
- struct usb_bus *bus = udev->bus;
- if (bus && bus->op->hub_suspend) {
- status = bus->op->hub_suspend (bus);
- if (status == 0) {
- dev_dbg(&udev->dev, "usb suspend\n");
- usb_set_device_state(udev,
- USB_STATE_SUSPENDED);
- }
- } else
- status = -EOPNOTSUPP;
- } else
+ if (udev->parent)
status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
udev);
if (status == 0)
- udev->dev.power.power_state = state;
+ udev->dev.power.power_state = PMSG_SUSPEND;
return status;
}
-/**
+#endif
+
+/*
* usb_suspend_device - suspend a usb device
* @udev: device that's no longer in active use
- * @state: PMSG_SUSPEND to suspend
- * Context: must be able to sleep; device not locked
+ * Context: must be able to sleep; device not locked; pm locks held
*
* Suspends a USB device that isn't in active use, conserving power.
* Devices may wake out of a suspend, if anything important happens,
@@ -1709,37 +1647,50 @@ static int __usb_suspend_device (struct usb_device *udev, int port1,
* suspend by the host, using usb_resume_device(). It's also routine
* to disconnect devices while they are suspended.
*
+ * This only affects the USB hardware for a device; its interfaces
+ * (and, for hubs, child devices) must already have been suspended.
+ *
* Suspending OTG devices may trigger HNP, if that's been enabled
* between a pair of dual-role devices. That will change roles, such
* as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
*
* Returns 0 on success, else negative errno.
*/
-int usb_suspend_device(struct usb_device *udev, pm_message_t state)
+int usb_suspend_device(struct usb_device *udev)
{
+#ifdef CONFIG_USB_SUSPEND
int port1, status;
port1 = locktree(udev);
if (port1 < 0)
return port1;
- status = __usb_suspend_device(udev, port1, state);
+ status = __usb_suspend_device(udev, port1);
usb_unlock_device(udev);
return status;
+#else
+ /* NOTE: udev->state unchanged, it's not lying ... */
+ udev->dev.power.power_state = PMSG_SUSPEND;
+ return 0;
+#endif
}
+EXPORT_SYMBOL_GPL(usb_suspend_device);
/*
+ * If the USB "suspend" state is in use (rather than "global suspend"),
+ * many devices will be individually taken out of suspend state using
+ * special" resume" signaling. These routines kick in shortly after
* hardware resume signaling is finished, either because of selective
* resume (by host) or remote wakeup (by device) ... now see what changed
* in the tree that's rooted at this device.
*/
-static int finish_port_resume(struct usb_device *udev)
+static int finish_device_resume(struct usb_device *udev)
{
int status;
u16 devstatus;
/* caller owns the udev device lock */
- dev_dbg(&udev->dev, "usb resume\n");
+ dev_dbg(&udev->dev, "finish resume\n");
/* usb ch9 identifies four variants of SUSPENDED, based on what
* state the device resumes to. Linux currently won't see the
@@ -1749,7 +1700,6 @@ static int finish_port_resume(struct usb_device *udev)
usb_set_device_state(udev, udev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
- udev->dev.power.power_state = PMSG_ON;
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
@@ -1762,9 +1712,11 @@ static int finish_port_resume(struct usb_device *udev)
status);
else if (udev->actconfig) {
unsigned i;
+ int (*resume)(struct device *);
le16_to_cpus(&devstatus);
- if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)
+ && udev->parent) {
status = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE,
@@ -1780,33 +1732,11 @@ static int finish_port_resume(struct usb_device *udev)
}
/* resume interface drivers; if this is a hub, it
- * resumes the child devices
+ * may have a child resume event to deal with soon
*/
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *intf;
- struct usb_driver *driver;
-
- intf = udev->actconfig->interface[i];
- if (intf->dev.power.power_state.event == PM_EVENT_ON)
- continue;
- if (!intf->dev.driver) {
- /* FIXME maybe force to alt 0 */
- continue;
- }
- driver = to_usb_driver(intf->dev.driver);
-
- /* bus_rescan_devices() may rebind drivers */
- if (!driver->resume)
- continue;
-
- /* can we do better than just logging errors? */
- status = driver->resume(intf);
- if (intf->dev.power.power_state.event != PM_EVENT_ON
- || status)
- dev_dbg(&intf->dev,
- "resume fail, state %d code %d\n",
- intf->dev.power.power_state.event, status);
- }
+ resume = udev->dev.bus->resume;
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++)
+ (void) resume(&udev->actconfig->interface[i]->dev);
status = 0;
} else if (udev->devnum <= 0) {
@@ -1816,6 +1746,8 @@ static int finish_port_resume(struct usb_device *udev)
return status;
}
+#ifdef CONFIG_USB_SUSPEND
+
static int
hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
{
@@ -1861,7 +1793,7 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
/* TRSMRCY = 10 msec */
msleep(10);
if (udev)
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
}
}
if (status < 0)
@@ -1870,12 +1802,12 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
return status;
}
-static int hub_resume (struct usb_interface *intf);
+#endif
-/**
+/*
* usb_resume_device - re-activate a suspended usb device
* @udev: device to re-activate
- * Context: must be able to sleep; device not locked
+ * Context: must be able to sleep; device not locked; pm locks held
*
* This will re-activate the suspended device, increasing power usage
* while letting drivers communicate again with its endpoints.
@@ -1893,35 +1825,22 @@ int usb_resume_device(struct usb_device *udev)
if (port1 < 0)
return port1;
- /* "global resume" of the HC-to-USB interface (root hub), or
- * selective resume of one hub-to-device port
- */
- if (!udev->parent) {
- struct usb_bus *bus = udev->bus;
- if (bus && bus->op->hub_resume) {
- status = bus->op->hub_resume (bus);
+#ifdef CONFIG_USB_SUSPEND
+ /* selective resume of one downstream hub-to-device port */
+ if (udev->parent) {
+ if (udev->state == USB_STATE_SUSPENDED) {
+ // NOTE swsusp may bork us, device state being wrong...
+ // NOTE this fails if parent is also suspended...
+ status = hub_port_resume(hdev_to_hub(udev->parent),
+ port1, udev);
} else
- status = -EOPNOTSUPP;
- if (status == 0) {
- dev_dbg(&udev->dev, "usb resume\n");
- /* TRSMRCY = 10 msec */
- msleep(10);
- usb_set_device_state (udev, USB_STATE_CONFIGURED);
- udev->dev.power.power_state = PMSG_ON;
- status = hub_resume (udev
- ->actconfig->interface[0]);
- }
- } else if (udev->state == USB_STATE_SUSPENDED) {
- // NOTE this fails if parent is also suspended...
- status = hub_port_resume(hdev_to_hub(udev->parent),
- port1, udev);
- } else {
- status = 0;
- }
- if (status < 0) {
+ status = 0;
+ } else
+#endif
+ status = finish_device_resume(udev);
+ if (status < 0)
dev_dbg(&udev->dev, "can't resume, status %d\n",
status);
- }
usb_unlock_device(udev);
@@ -1938,6 +1857,8 @@ static int remote_wakeup(struct usb_device *udev)
{
int status = 0;
+#ifdef CONFIG_USB_SUSPEND
+
/* don't repeat RESUME sequence if this device
* was already woken up by some other task
*/
@@ -1946,38 +1867,52 @@ static int remote_wakeup(struct usb_device *udev)
dev_dbg(&udev->dev, "RESUME (wakeup)\n");
/* TRSMRCY = 10 msec */
msleep(10);
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
}
up(&udev->serialize);
+#endif
return status;
}
-static int hub_suspend(struct usb_interface *intf, pm_message_t state)
+static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
- int status;
-
- /* stop khubd and related activity */
- hub_quiesce(hub);
- /* then suspend every port */
+ /* fail if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
udev = hdev->children [port1-1];
- if (!udev)
- continue;
- down(&udev->serialize);
- status = __usb_suspend_device(udev, port1, state);
- up(&udev->serialize);
- if (status < 0)
- dev_dbg(&intf->dev, "suspend port %d --> %d\n",
- port1, status);
+ if (udev && (udev->dev.power.power_state.event
+ == PM_EVENT_ON
+#ifdef CONFIG_USB_SUSPEND
+ || udev->state != USB_STATE_SUSPENDED
+#endif
+ )) {
+ dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ return -EBUSY;
+ }
}
- intf->dev.power.power_state = state;
+ /* "global suspend" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ int status = hcd_bus_suspend (bus);
+
+ if (status != 0) {
+ dev_dbg(&hdev->dev, "'global' suspend %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ }
+
+ /* stop khubd and related activity */
+ hub_quiesce(hub);
return 0;
}
@@ -1985,11 +1920,35 @@ static int hub_resume(struct usb_interface *intf)
{
struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_get_intfdata (intf);
- unsigned port1;
int status;
- if (intf->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
+ /* "global resume" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ struct usb_bus *bus = hdev->bus;
+ if (bus) {
+ status = hcd_bus_resume (bus);
+ if (status) {
+ dev_dbg(&intf->dev, "'global' resume %d\n",
+ status);
+ return status;
+ }
+ } else
+ return -EOPNOTSUPP;
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ }
+ }
+
+ hub_activate(hub);
+
+ /* REVISIT: this recursion probably shouldn't exist. Remove
+ * this code sometime, after retesting with different root and
+ * external hubs.
+ */
+#ifdef CONFIG_USB_SUSPEND
+ {
+ unsigned port1;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
@@ -2015,7 +1974,7 @@ static int hub_resume(struct usb_interface *intf)
if (portstat & USB_PORT_STAT_SUSPEND)
status = hub_port_resume(hub, port1, udev);
else {
- status = finish_port_resume(udev);
+ status = finish_device_resume(udev);
if (status < 0) {
dev_dbg(&intf->dev, "resume port %d --> %d\n",
port1, status);
@@ -2024,43 +1983,31 @@ static int hub_resume(struct usb_interface *intf)
}
up(&udev->serialize);
}
- intf->dev.power.power_state = PMSG_ON;
-
- hub->resume_root_hub = 0;
- hub_activate(hub);
+ }
+#endif
return 0;
}
-void usb_resume_root_hub(struct usb_device *hdev)
+void usb_suspend_root_hub(struct usb_device *hdev)
{
struct usb_hub *hub = hdev_to_hub(hdev);
- hub->resume_root_hub = 1;
- kick_khubd(hub);
+ /* This also makes any led blinker stop retriggering. We're called
+ * from irq, so the blinker might still be scheduled. Caller promises
+ * that the root hub status URB will be canceled.
+ */
+ __hub_quiesce(hub);
+ mark_quiesced(to_usb_interface(hub->intfdev));
}
-#else /* !CONFIG_USB_SUSPEND */
-
-int usb_suspend_device(struct usb_device *udev, pm_message_t state)
+void usb_resume_root_hub(struct usb_device *hdev)
{
- return 0;
-}
+ struct usb_hub *hub = hdev_to_hub(hdev);
-int usb_resume_device(struct usb_device *udev)
-{
- return 0;
+ hub->resume_root_hub = 1;
+ kick_khubd(hub);
}
-#define hub_suspend NULL
-#define hub_resume NULL
-#define remote_wakeup(x) 0
-
-#endif /* CONFIG_USB_SUSPEND */
-
-EXPORT_SYMBOL(usb_suspend_device);
-EXPORT_SYMBOL(usb_resume_device);
-
-
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
@@ -2469,6 +2416,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
{
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
+ u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
int status, i;
dev_dbg (hub_dev,
@@ -2506,8 +2454,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
/* maybe switch power back on (e.g. root hub was reset) */
- if ((hub->descriptor->wHubCharacteristics
- & HUB_CHAR_LPSM) < 2
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
@@ -2686,21 +2633,28 @@ static void hub_events(void)
intf = to_usb_interface(hub->intfdev);
hub_dev = &intf->dev;
- dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+ i = hub->resume_root_hub;
+
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
hdev->state, hub->descriptor
? hub->descriptor->bNbrPorts
: 0,
/* NOTE: expects max 15 ports... */
(u16) hub->change_bits[0],
- (u16) hub->event_bits[0]);
+ (u16) hub->event_bits[0],
+ i ? ", resume root" : "");
usb_get_intf(intf);
- i = hub->resume_root_hub;
spin_unlock_irq(&hub_event_lock);
- /* Is this is a root hub wanting to be resumed? */
- if (i)
- usb_resume_device(hdev);
+ /* Is this is a root hub wanting to reactivate the downstream
+ * ports? If so, be sure the interface resumes even if its
+ * stub "device" node was never suspended.
+ */
+ if (i) {
+ dpm_runtime_resume(&hdev->dev);
+ dpm_runtime_resume(&intf->dev);
+ }
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index e7fa9b5a521..bf23f897802 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -131,7 +131,7 @@ struct usb_hub_descriptor {
__u8 bDescLength;
__u8 bDescriptorType;
__u8 bNbrPorts;
- __u16 wHubCharacteristics;
+ __le16 wHubCharacteristics;
__u8 bPwrOn2PwrGood;
__u8 bHubContrCurrent;
/* add 1 bit for hub status change; round to bytes */
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index d07bba01995..12f490fdee8 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,6 +39,7 @@
#include <linux/usbdevice_fs.h>
#include <linux/smp_lock.h>
#include <linux/parser.h>
+#include <linux/notifier.h>
#include <asm/byteorder.h>
#include "usb.h"
#include "hcd.h"
@@ -619,7 +620,7 @@ void usbfs_update_special (void)
}
}
-void usbfs_add_bus(struct usb_bus *bus)
+static void usbfs_add_bus(struct usb_bus *bus)
{
struct dentry *parent;
char name[8];
@@ -642,12 +643,9 @@ void usbfs_add_bus(struct usb_bus *bus)
err ("error creating usbfs bus entry");
return;
}
-
- usbfs_update_special();
- usbfs_conn_disc_event();
}
-void usbfs_remove_bus(struct usb_bus *bus)
+static void usbfs_remove_bus(struct usb_bus *bus)
{
if (bus->usbfs_dentry) {
fs_remove_file (bus->usbfs_dentry);
@@ -659,12 +657,9 @@ void usbfs_remove_bus(struct usb_bus *bus)
remove_special_files();
num_buses = 0;
}
-
- usbfs_update_special();
- usbfs_conn_disc_event();
}
-void usbfs_add_device(struct usb_device *dev)
+static void usbfs_add_device(struct usb_device *dev)
{
char name[8];
int i;
@@ -690,12 +685,9 @@ void usbfs_add_device(struct usb_device *dev)
}
if (dev->usbfs_dentry->d_inode)
dev->usbfs_dentry->d_inode->i_size = i_size;
-
- usbfs_update_special();
- usbfs_conn_disc_event();
}
-void usbfs_remove_device(struct usb_device *dev)
+static void usbfs_remove_device(struct usb_device *dev)
{
struct dev_state *ds;
struct siginfo sinfo;
@@ -716,10 +708,33 @@ void usbfs_remove_device(struct usb_device *dev)
kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid);
}
}
+}
+
+static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev)
+{
+ switch (action) {
+ case USB_DEVICE_ADD:
+ usbfs_add_device(dev);
+ break;
+ case USB_DEVICE_REMOVE:
+ usbfs_remove_device(dev);
+ break;
+ case USB_BUS_ADD:
+ usbfs_add_bus(dev);
+ break;
+ case USB_BUS_REMOVE:
+ usbfs_remove_bus(dev);
+ }
+
usbfs_update_special();
usbfs_conn_disc_event();
+ return NOTIFY_OK;
}
+static struct notifier_block usbfs_nb = {
+ .notifier_call = usbfs_notify,
+};
+
/* --------------------------------------------------------------------- */
static struct proc_dir_entry *usbdir = NULL;
@@ -732,6 +747,8 @@ int __init usbfs_init(void)
if (retval)
return retval;
+ usb_register_notify(&usbfs_nb);
+
/* create mount point for usbfs */
usbdir = proc_mkdir("usb", proc_bus);
@@ -740,6 +757,7 @@ int __init usbfs_init(void)
void usbfs_cleanup(void)
{
+ usb_unregister_notify(&usbfs_nb);
unregister_filesystem(&usb_fs_type);
if (usbdir)
remove_proc_entry("usb", proc_bus);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index f9a81e84dbd..644a3d4f12a 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -187,21 +187,37 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u
* If a thread in your driver uses this call, make sure your disconnect()
* method can wait for it to complete. Since you don't have a handle on
* the URB used, you can't cancel the request.
+ *
+ * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT
+ * ioctl, users are forced to abuse this routine by using it to submit
+ * URBs for interrupt endpoints. We will take the liberty of creating
+ * an interrupt URB (with the default interval) if the target is an
+ * interrupt endpoint.
*/
int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe,
void *data, int len, int *actual_length, int timeout)
{
struct urb *urb;
+ struct usb_host_endpoint *ep;
- if (len < 0)
+ ep = (usb_pipein(pipe) ? usb_dev->ep_in : usb_dev->ep_out)
+ [usb_pipeendpoint(pipe)];
+ if (!ep || len < 0)
return -EINVAL;
- urb=usb_alloc_urb(0, GFP_KERNEL);
+ urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
- usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
- usb_api_blocking_completion, NULL);
+ if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_INT) {
+ pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+ usb_fill_int_urb(urb, usb_dev, pipe, data, len,
+ usb_api_blocking_completion, NULL,
+ ep->desc.bInterval);
+ } else
+ usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
+ usb_api_blocking_completion, NULL);
return usb_start_wait_urb(urb, timeout, actual_length);
}
@@ -771,6 +787,31 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
return err;
}
+/**
+ * usb_cache_string - read a string descriptor and cache it for later use
+ * @udev: the device whose string descriptor is being read
+ * @index: the descriptor index
+ *
+ * Returns a pointer to a kmalloc'ed buffer containing the descriptor string,
+ * or NULL if the index is 0 or the string could not be read.
+ */
+char *usb_cache_string(struct usb_device *udev, int index)
+{
+ char *buf;
+ char *smallbuf = NULL;
+ int len;
+
+ if (index > 0 && (buf = kmalloc(256, GFP_KERNEL)) != NULL) {
+ if ((len = usb_string(udev, index, buf, 256)) > 0) {
+ if ((smallbuf = kmalloc(++len, GFP_KERNEL)) == NULL)
+ return buf;
+ memcpy(smallbuf, buf, len);
+ }
+ kfree(buf);
+ }
+ return smallbuf;
+}
+
/*
* usb_get_device_descriptor - (re)reads the device descriptor (usbcore)
* @dev: the device whose device descriptor is being updated
@@ -992,8 +1033,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
dev_dbg (&dev->dev, "unregistering interface %s\n",
interface->dev.bus_id);
usb_remove_sysfs_intf_files(interface);
- kfree(interface->cur_altsetting->string);
- interface->cur_altsetting->string = NULL;
device_del (&interface->dev);
}
@@ -1133,6 +1172,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
*/
/* prevent submissions using previous endpoint settings */
+ if (device_is_registered(&iface->dev))
+ usb_remove_sysfs_intf_files(iface);
usb_disable_interface(dev, iface);
iface->cur_altsetting = alt;
@@ -1168,6 +1209,8 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
* (Likewise, EP0 never "halts" on well designed devices.)
*/
usb_enable_interface(dev, iface);
+ if (device_is_registered(&iface->dev))
+ usb_create_sysfs_intf_files(iface);
return 0;
}
@@ -1217,10 +1260,8 @@ int usb_reset_configuration(struct usb_device *dev)
USB_REQ_SET_CONFIGURATION, 0,
config->desc.bConfigurationValue, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (retval < 0) {
- usb_set_device_state(dev, USB_STATE_ADDRESS);
+ if (retval < 0)
return retval;
- }
dev->toggle[0] = dev->toggle[1] = 0;
@@ -1229,6 +1270,8 @@ int usb_reset_configuration(struct usb_device *dev)
struct usb_interface *intf = config->interface[i];
struct usb_host_interface *alt;
+ if (device_is_registered(&intf->dev))
+ usb_remove_sysfs_intf_files(intf);
alt = usb_altnum_to_altsetting(intf, 0);
/* No altsetting 0? We'll assume the first altsetting.
@@ -1241,6 +1284,8 @@ int usb_reset_configuration(struct usb_device *dev)
intf->cur_altsetting = alt;
usb_enable_interface(dev, intf);
+ if (device_is_registered(&intf->dev))
+ usb_create_sysfs_intf_files(intf);
}
return 0;
}
@@ -1328,7 +1373,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
}
for (; n < nintf; ++n) {
- new_interfaces[n] = kmalloc(
+ new_interfaces[n] = kzalloc(
sizeof(struct usb_interface),
GFP_KERNEL);
if (!new_interfaces[n]) {
@@ -1369,7 +1414,6 @@ free_interfaces:
struct usb_host_interface *alt;
cp->interface[i] = intf = new_interfaces[i];
- memset(intf, 0, sizeof(*intf));
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
@@ -1393,6 +1437,7 @@ free_interfaces:
intf->dev.dma_mask = dev->dev.dma_mask;
intf->dev.release = release_interface;
device_initialize (&intf->dev);
+ mark_quiesced(intf);
sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
dev->bus->busnum, dev->devpath,
configuration,
@@ -1400,12 +1445,9 @@ free_interfaces:
}
kfree(new_interfaces);
- if ((cp->desc.iConfiguration) &&
- (cp->string == NULL)) {
- cp->string = kmalloc(256, GFP_KERNEL);
- if (cp->string)
- usb_string(dev, cp->desc.iConfiguration, cp->string, 256);
- }
+ if (cp->string == NULL)
+ cp->string = usb_cache_string(dev,
+ cp->desc.iConfiguration);
/* Now that all the interfaces are set up, register them
* to trigger binding of drivers to interfaces. probe()
@@ -1415,13 +1457,12 @@ free_interfaces:
*/
for (i = 0; i < nintf; ++i) {
struct usb_interface *intf = cp->interface[i];
- struct usb_interface_descriptor *desc;
+ struct usb_host_interface *alt = intf->cur_altsetting;
- desc = &intf->altsetting [0].desc;
dev_dbg (&dev->dev,
"adding %s (config #%d, interface %d)\n",
intf->dev.bus_id, configuration,
- desc->bInterfaceNumber);
+ alt->desc.bInterfaceNumber);
ret = device_add (&intf->dev);
if (ret != 0) {
dev_err(&dev->dev,
@@ -1430,13 +1471,6 @@ free_interfaces:
ret);
continue;
}
- if ((intf->cur_altsetting->desc.iInterface) &&
- (intf->cur_altsetting->string == NULL)) {
- intf->cur_altsetting->string = kmalloc(256, GFP_KERNEL);
- if (intf->cur_altsetting->string)
- usb_string(dev, intf->cur_altsetting->desc.iInterface,
- intf->cur_altsetting->string, 256);
- }
usb_create_sysfs_intf_files (intf);
}
}
diff --git a/drivers/usb/core/notify.c b/drivers/usb/core/notify.c
new file mode 100644
index 00000000000..37da059eced
--- /dev/null
+++ b/drivers/usb/core/notify.c
@@ -0,0 +1,120 @@
+/*
+ * All the USB notify logic
+ *
+ * (C) Copyright 2005 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * notifier functions originally based on those in kernel/sys.c
+ * but fixed up to not be so broken.
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#ifdef CONFIG_USB_DEBUG
+ #define DEBUG
+#else
+ #undef DEBUG
+#endif
+#include <linux/usb.h>
+
+#include "usb.h"
+
+
+static struct notifier_block *usb_notifier_list;
+static DECLARE_MUTEX(usb_notifier_lock);
+
+static void usb_notifier_chain_register(struct notifier_block **list,
+ struct notifier_block *n)
+{
+ down(&usb_notifier_lock);
+ while (*list) {
+ if (n->priority > (*list)->priority)
+ break;
+ list = &((*list)->next);
+ }
+ n->next = *list;
+ *list = n;
+ up(&usb_notifier_lock);
+}
+
+static void usb_notifier_chain_unregister(struct notifier_block **nl,
+ struct notifier_block *n)
+{
+ down(&usb_notifier_lock);
+ while ((*nl)!=NULL) {
+ if ((*nl)==n) {
+ *nl = n->next;
+ goto exit;
+ }
+ nl=&((*nl)->next);
+ }
+exit:
+ up(&usb_notifier_lock);
+}
+
+static int usb_notifier_call_chain(struct notifier_block **n,
+ unsigned long val, void *v)
+{
+ int ret=NOTIFY_DONE;
+ struct notifier_block *nb = *n;
+
+ down(&usb_notifier_lock);
+ while (nb) {
+ ret = nb->notifier_call(nb,val,v);
+ if (ret&NOTIFY_STOP_MASK) {
+ goto exit;
+ }
+ nb = nb->next;
+ }
+exit:
+ up(&usb_notifier_lock);
+ return ret;
+}
+
+/**
+ * usb_register_notify - register a notifier callback whenever a usb change happens
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * These changes are either USB devices or busses being added or removed.
+ */
+void usb_register_notify(struct notifier_block *nb)
+{
+ usb_notifier_chain_register(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_register_notify);
+
+/**
+ * usb_unregister_notify - unregister a notifier callback
+ * @nb: pointer to the notifier block for the callback events.
+ *
+ * usb_register_notifier() must have been previously called for this function
+ * to work properly.
+ */
+void usb_unregister_notify(struct notifier_block *nb)
+{
+ usb_notifier_chain_unregister(&usb_notifier_list, nb);
+}
+EXPORT_SYMBOL_GPL(usb_unregister_notify);
+
+
+void usb_notify_add_device(struct usb_device *udev)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_ADD, udev);
+}
+
+void usb_notify_remove_device(struct usb_device *udev)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_DEVICE_REMOVE, udev);
+}
+
+void usb_notify_add_bus(struct usb_bus *ubus)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_BUS_ADD, ubus);
+}
+
+void usb_notify_remove_bus(struct usb_bus *ubus)
+{
+ usb_notifier_call_chain(&usb_notifier_list, USB_BUS_REMOVE, ubus);
+}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 00297f11384..edd83e01445 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -22,9 +22,207 @@
#include "usb.h"
+/* endpoint stuff */
+struct ep_object {
+ struct usb_endpoint_descriptor *desc;
+ struct usb_device *udev;
+ struct kobject kobj;
+};
+#define to_ep_object(_kobj) \
+ container_of(_kobj, struct ep_object, kobj)
+
+struct ep_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct usb_device *,
+ struct usb_endpoint_descriptor *, char *);
+};
+#define to_ep_attribute(_attr) \
+ container_of(_attr, struct ep_attribute, attr)
+
+#define EP_ATTR(_name) \
+struct ep_attribute ep_##_name = { \
+ .attr = {.name = #_name, .owner = THIS_MODULE, \
+ .mode = S_IRUGO}, \
+ .show = show_ep_##_name}
+
+#define usb_ep_attr(field, format_string) \
+static ssize_t show_ep_##field(struct usb_device *udev, \
+ struct usb_endpoint_descriptor *desc, \
+ char *buf) \
+{ \
+ return sprintf(buf, format_string, desc->field); \
+} \
+static EP_ATTR(field);
+
+usb_ep_attr(bLength, "%02x\n")
+usb_ep_attr(bEndpointAddress, "%02x\n")
+usb_ep_attr(bmAttributes, "%02x\n")
+usb_ep_attr(bInterval, "%02x\n")
+
+static ssize_t show_ep_wMaxPacketSize(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ return sprintf(buf, "%04x\n",
+ le16_to_cpu(desc->wMaxPacketSize) & 0x07ff);
+}
+static EP_ATTR(wMaxPacketSize);
+
+static ssize_t show_ep_type(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ char *type = "unknown";
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ type = "Control";
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ type = "Isoc";
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ type = "Bulk";
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ type = "Interrupt";
+ break;
+ }
+ return sprintf(buf, "%s\n", type);
+}
+static EP_ATTR(type);
+
+static ssize_t show_ep_interval(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ char unit;
+ unsigned interval = 0;
+ unsigned in;
+
+ in = (desc->bEndpointAddress & USB_DIR_IN);
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ if (udev->speed == USB_SPEED_HIGH) /* uframes per NAK */
+ interval = desc->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ interval = 1 << (desc->bInterval - 1);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if (udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */
+ interval = desc->bInterval;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (udev->speed == USB_SPEED_HIGH)
+ interval = 1 << (desc->bInterval - 1);
+ else
+ interval = desc->bInterval;
+ break;
+ }
+ interval *= (udev->speed == USB_SPEED_HIGH) ? 125 : 1000;
+ if (interval % 1000)
+ unit = 'u';
+ else {
+ unit = 'm';
+ interval /= 1000;
+ }
+
+ return sprintf(buf, "%d%cs\n", interval, unit);
+}
+static EP_ATTR(interval);
+
+static ssize_t show_ep_direction(struct usb_device *udev,
+ struct usb_endpoint_descriptor *desc, char *buf)
+{
+ char *direction;
+
+ if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL)
+ direction = "both";
+ else if (desc->bEndpointAddress & USB_DIR_IN)
+ direction = "in";
+ else
+ direction = "out";
+ return sprintf(buf, "%s\n", direction);
+}
+static EP_ATTR(direction);
+
+static struct attribute *ep_attrs[] = {
+ &ep_bLength.attr,
+ &ep_bEndpointAddress.attr,
+ &ep_bmAttributes.attr,
+ &ep_bInterval.attr,
+ &ep_wMaxPacketSize.attr,
+ &ep_type.attr,
+ &ep_interval.attr,
+ &ep_direction.attr,
+ NULL,
+};
+
+static void ep_object_release(struct kobject *kobj)
+{
+ kfree(to_ep_object(kobj));
+}
+
+static ssize_t ep_object_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct ep_object *ep_obj = to_ep_object(kobj);
+ struct ep_attribute *ep_attr = to_ep_attribute(attr);
+
+ return (ep_attr->show)(ep_obj->udev, ep_obj->desc, buf);
+}
+
+static struct sysfs_ops ep_object_sysfs_ops = {
+ .show = ep_object_show,
+};
+
+static struct kobj_type ep_object_ktype = {
+ .release = ep_object_release,
+ .sysfs_ops = &ep_object_sysfs_ops,
+ .default_attrs = ep_attrs,
+};
+
+static void usb_create_ep_files(struct kobject *parent,
+ struct usb_host_endpoint *endpoint,
+ struct usb_device *udev)
+{
+ struct ep_object *ep_obj;
+ struct kobject *kobj;
+
+ ep_obj = kzalloc(sizeof(struct ep_object), GFP_KERNEL);
+ if (!ep_obj)
+ return;
+
+ ep_obj->desc = &endpoint->desc;
+ ep_obj->udev = udev;
+
+ kobj = &ep_obj->kobj;
+ kobject_set_name(kobj, "ep_%02x", endpoint->desc.bEndpointAddress);
+ kobj->parent = parent;
+ kobj->ktype = &ep_object_ktype;
+
+ /* Don't use kobject_register, because it generates a hotplug event */
+ kobject_init(kobj);
+ if (kobject_add(kobj) == 0)
+ endpoint->kobj = kobj;
+ else
+ kobject_put(kobj);
+}
+
+static void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
+{
+
+ if (endpoint->kobj) {
+ kobject_del(endpoint->kobj);
+ kobject_put(endpoint->kobj);
+ endpoint->kobj = NULL;
+ }
+}
+
/* Active configuration fields */
#define usb_actconfig_show(field, multiplier, format_string) \
-static ssize_t show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_##field (struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
struct usb_device *udev; \
struct usb_host_config *actconfig; \
@@ -46,22 +244,17 @@ usb_actconfig_attr (bNumInterfaces, 1, "%2d\n")
usb_actconfig_attr (bmAttributes, 1, "%2x\n")
usb_actconfig_attr (bMaxPower, 2, "%3dmA\n")
-static ssize_t show_configuration_string(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_configuration_string(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
struct usb_host_config *actconfig;
- int len;
udev = to_usb_device (dev);
actconfig = udev->actconfig;
if ((!actconfig) || (!actconfig->string))
return 0;
- len = sprintf(buf, actconfig->string, PAGE_SIZE);
- if (len < 0)
- return 0;
- buf[len] = '\n';
- buf[len+1] = 0;
- return len+1;
+ return sprintf(buf, "%s\n", actconfig->string);
}
static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL);
@@ -69,7 +262,8 @@ static DEVICE_ATTR(configuration, S_IRUGO, show_configuration_string, NULL);
usb_actconfig_show(bConfigurationValue, 1, "%u\n");
static ssize_t
-set_bConfigurationValue (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+set_bConfigurationValue (struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
struct usb_device *udev = udev = to_usb_device (dev);
int config, value;
@@ -87,18 +281,13 @@ static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
/* String fields */
#define usb_string_attr(name) \
-static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
+static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
struct usb_device *udev; \
- int len; \
\
udev = to_usb_device (dev); \
- len = snprintf(buf, 256, "%s", udev->name); \
- if (len < 0) \
- return 0; \
- buf[len] = '\n'; \
- buf[len+1] = 0; \
- return len+1; \
+ return sprintf(buf, "%s\n", udev->name); \
} \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
@@ -167,7 +356,8 @@ static DEVICE_ATTR(maxchild, S_IRUGO, show_maxchild, NULL);
/* Descriptor fields */
#define usb_descriptor_attr_le16(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+show_##field (struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct usb_device *udev; \
\
@@ -183,7 +373,8 @@ usb_descriptor_attr_le16(bcdDevice, "%04x\n")
#define usb_descriptor_attr(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+show_##field (struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct usb_device *udev; \
\
@@ -236,19 +427,21 @@ void usb_create_sysfs_dev_files (struct usb_device *udev)
if (udev->serial)
device_create_file (dev, &dev_attr_serial);
device_create_file (dev, &dev_attr_configuration);
+ usb_create_ep_files(&dev->kobj, &udev->ep0, udev);
}
void usb_remove_sysfs_dev_files (struct usb_device *udev)
{
struct device *dev = &udev->dev;
+ usb_remove_ep_files(&udev->ep0);
sysfs_remove_group(&dev->kobj, &dev_attr_grp);
- if (udev->descriptor.iManufacturer)
+ if (udev->manufacturer)
device_remove_file(dev, &dev_attr_manufacturer);
- if (udev->descriptor.iProduct)
+ if (udev->product)
device_remove_file(dev, &dev_attr_product);
- if (udev->descriptor.iSerialNumber)
+ if (udev->serial)
device_remove_file(dev, &dev_attr_serial);
device_remove_file (dev, &dev_attr_configuration);
}
@@ -256,11 +449,13 @@ void usb_remove_sysfs_dev_files (struct usb_device *udev)
/* Interface fields */
#define usb_intf_attr(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, char *buf) \
+show_##field (struct device *dev, struct device_attribute *attr, \
+ char *buf) \
{ \
struct usb_interface *intf = to_usb_interface (dev); \
\
- return sprintf (buf, format_string, intf->cur_altsetting->desc.field); \
+ return sprintf (buf, format_string, \
+ intf->cur_altsetting->desc.field); \
} \
static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
@@ -271,7 +466,8 @@ usb_intf_attr (bInterfaceClass, "%02x\n")
usb_intf_attr (bInterfaceSubClass, "%02x\n")
usb_intf_attr (bInterfaceProtocol, "%02x\n")
-static ssize_t show_interface_string(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_interface_string(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct usb_interface *intf;
struct usb_device *udev;
@@ -288,34 +484,28 @@ static ssize_t show_interface_string(struct device *dev, struct device_attribute
}
static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL);
-static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_modalias(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct usb_interface *intf;
struct usb_device *udev;
- int len;
+ struct usb_host_interface *alt;
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
-
- len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct),
- le16_to_cpu(udev->descriptor.bcdDevice),
- udev->descriptor.bDeviceClass,
- udev->descriptor.bDeviceSubClass,
- udev->descriptor.bDeviceProtocol);
- buf += len;
-
- if (udev->descriptor.bDeviceClass == 0) {
- struct usb_host_interface *alt = intf->cur_altsetting;
-
- return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol);
- } else {
- return len + sprintf(buf, "*isc*ip*\n");
- }
+ alt = intf->cur_altsetting;
+
+ return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02X"
+ "ic%02Xisc%02Xip%02X\n",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct),
+ le16_to_cpu(udev->descriptor.bcdDevice),
+ udev->descriptor.bDeviceClass,
+ udev->descriptor.bDeviceSubClass,
+ udev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol);
}
static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
@@ -333,20 +523,47 @@ static struct attribute_group intf_attr_grp = {
.attrs = intf_attrs,
};
+static inline void usb_create_intf_ep_files(struct usb_interface *intf,
+ struct usb_device *udev)
+{
+ struct usb_host_interface *iface_desc;
+ int i;
+
+ iface_desc = intf->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
+ usb_create_ep_files(&intf->dev.kobj, &iface_desc->endpoint[i],
+ udev);
+}
+
+static inline void usb_remove_intf_ep_files(struct usb_interface *intf)
+{
+ struct usb_host_interface *iface_desc;
+ int i;
+
+ iface_desc = intf->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i)
+ usb_remove_ep_files(&iface_desc->endpoint[i]);
+}
+
void usb_create_sysfs_intf_files (struct usb_interface *intf)
{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_interface *alt = intf->cur_altsetting;
+
sysfs_create_group(&intf->dev.kobj, &intf_attr_grp);
- if (intf->cur_altsetting->string)
+ if (alt->string == NULL)
+ alt->string = usb_cache_string(udev, alt->desc.iInterface);
+ if (alt->string)
device_create_file(&intf->dev, &dev_attr_interface);
-
+ usb_create_intf_ep_files(intf, udev);
}
void usb_remove_sysfs_intf_files (struct usb_interface *intf)
{
+ usb_remove_intf_ep_files(intf);
sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp);
if (intf->cur_altsetting->string)
device_remove_file(&intf->dev, &dev_attr_interface);
-
}
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index b32898e0a27..f2a1fed2a80 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -237,7 +237,8 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
(dev->state < USB_STATE_DEFAULT) ||
(!dev->bus) || (dev->devnum <= 0))
return -ENODEV;
- if (dev->state == USB_STATE_SUSPENDED)
+ if (dev->bus->controller->power.power_state.event != PM_EVENT_ON
+ || dev->state == USB_STATE_SUSPENDED)
return -EHOSTUNREACH;
if (!(op = dev->bus->op) || !op->submit_urb)
return -ENODEV;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 4c57f3f649e..0eefff7bcb3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -107,10 +107,19 @@ static int usb_probe_interface(struct device *dev)
id = usb_match_id (intf, driver->id_table);
if (id) {
dev_dbg (dev, "%s - got id\n", __FUNCTION__);
+
+ /* Interface "power state" doesn't correspond to any hardware
+ * state whatsoever. We use it to record when it's bound to
+ * a driver that may start I/0: it's not frozen/quiesced.
+ */
+ mark_active(intf);
intf->condition = USB_INTERFACE_BINDING;
error = driver->probe (intf, id);
- intf->condition = error ? USB_INTERFACE_UNBOUND :
- USB_INTERFACE_BOUND;
+ if (error) {
+ mark_quiesced(intf);
+ intf->condition = USB_INTERFACE_UNBOUND;
+ } else
+ intf->condition = USB_INTERFACE_BOUND;
}
return error;
@@ -136,6 +145,7 @@ static int usb_unbind_interface(struct device *dev)
0);
usb_set_intfdata(intf, NULL);
intf->condition = USB_INTERFACE_UNBOUND;
+ mark_quiesced(intf);
return 0;
}
@@ -299,6 +309,7 @@ int usb_driver_claim_interface(struct usb_driver *driver,
dev->driver = &driver->driver;
usb_set_intfdata(iface, priv);
iface->condition = USB_INTERFACE_BOUND;
+ mark_active(iface);
/* if interface was already added, bind now; else let
* the future device_add() bind it, bypassing probe()
@@ -345,6 +356,7 @@ void usb_driver_release_interface(struct usb_driver *driver,
dev->driver = NULL;
usb_set_intfdata(iface, NULL);
iface->condition = USB_INTERFACE_UNBOUND;
+ mark_quiesced(iface);
}
/**
@@ -557,6 +569,7 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
{
struct usb_interface *intf;
struct usb_device *usb_dev;
+ struct usb_host_interface *alt;
int i = 0;
int length = 0;
@@ -573,7 +586,8 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev (intf);
-
+ alt = intf->cur_altsetting;
+
if (usb_dev->devnum < 0) {
pr_debug ("usb %s: already deleted?\n", dev->bus_id);
return -ENODEV;
@@ -615,46 +629,27 @@ static int usb_hotplug (struct device *dev, char **envp, int num_envp,
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (usb_dev->descriptor.bDeviceClass == 0) {
- struct usb_host_interface *alt = intf->cur_altsetting;
+ if (add_hotplug_env_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "INTERFACE=%d/%d/%d",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
- /* 2.4 only exposed interface zero. in 2.5, hotplug
- * agents are called for all interfaces, and can use
- * $DEVPATH/bInterfaceNumber if necessary.
- */
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
- } else {
- if (add_hotplug_env_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
- }
+ if (add_hotplug_env_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct),
+ le16_to_cpu(usb_dev->descriptor.bcdDevice),
+ usb_dev->descriptor.bDeviceClass,
+ usb_dev->descriptor.bDeviceSubClass,
+ usb_dev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
envp[i] = NULL;
@@ -709,12 +704,10 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
{
struct usb_device *dev;
- dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
- memset(dev, 0, sizeof(*dev));
-
bus = usb_bus_get(bus);
if (!bus) {
kfree(dev);
@@ -1402,13 +1395,30 @@ void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
+static int verify_suspended(struct device *dev, void *unused)
+{
+ return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0;
+}
+
static int usb_generic_suspend(struct device *dev, pm_message_t message)
{
- struct usb_interface *intf;
- struct usb_driver *driver;
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+ int status;
- if (dev->driver == &usb_generic_driver)
- return usb_suspend_device (to_usb_device(dev), message);
+ /* USB devices enter SUSPEND state through their hubs, but can be
+ * marked for FREEZE as soon as their children are already idled.
+ * But those semantics are useless, so we equate the two (sigh).
+ */
+ if (dev->driver == &usb_generic_driver) {
+ if (dev->power.power_state.event == message.event)
+ return 0;
+ /* we need to rule out bogus requests through sysfs */
+ status = device_for_each_child(dev, NULL, verify_suspended);
+ if (status)
+ return status;
+ return usb_suspend_device (to_usb_device(dev));
+ }
if ((dev->driver == NULL) ||
(dev->driver_data == &usb_generic_driver_data))
@@ -1417,23 +1427,44 @@ static int usb_generic_suspend(struct device *dev, pm_message_t message)
intf = to_usb_interface(dev);
driver = to_usb_driver(dev->driver);
- /* there's only one USB suspend state */
- if (intf->dev.power.power_state.event)
+ /* with no hardware, USB interfaces only use FREEZE and ON states */
+ if (!is_active(intf))
return 0;
- if (driver->suspend)
- return driver->suspend(intf, message);
- return 0;
+ if (driver->suspend && driver->resume) {
+ status = driver->suspend(intf, message);
+ if (status)
+ dev_err(dev, "%s error %d\n", "suspend", status);
+ else
+ mark_quiesced(intf);
+ } else {
+ // FIXME else if there's no suspend method, disconnect...
+ dev_warn(dev, "no %s?\n", "suspend");
+ status = 0;
+ }
+ return status;
}
static int usb_generic_resume(struct device *dev)
{
- struct usb_interface *intf;
- struct usb_driver *driver;
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+ struct usb_device *udev;
+ int status;
- /* devices resume through their hub */
- if (dev->driver == &usb_generic_driver)
+ if (dev->power.power_state.event == PM_EVENT_ON)
+ return 0;
+
+ /* mark things as "on" immediately, no matter what errors crop up */
+ dev->power.power_state.event = PM_EVENT_ON;
+
+ /* devices resume through their hubs */
+ if (dev->driver == &usb_generic_driver) {
+ udev = to_usb_device(dev);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return 0;
return usb_resume_device (to_usb_device(dev));
+ }
if ((dev->driver == NULL) ||
(dev->driver_data == &usb_generic_driver_data))
@@ -1442,8 +1473,22 @@ static int usb_generic_resume(struct device *dev)
intf = to_usb_interface(dev);
driver = to_usb_driver(dev->driver);
- if (driver->resume)
- return driver->resume(intf);
+ udev = interface_to_usbdev(intf);
+ if (udev->state == USB_STATE_NOTATTACHED)
+ return 0;
+
+ /* if driver was suspended, it has a resume method;
+ * however, sysfs can wrongly mark things as suspended
+ * (on the "no suspend method" FIXME path above)
+ */
+ if (driver->resume) {
+ status = driver->resume(intf);
+ if (status) {
+ dev_err(dev, "%s error %d\n", "resume", status);
+ mark_quiesced(intf);
+ }
+ } else
+ dev_warn(dev, "no %s?\n", "resume");
return 0;
}
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index e6504f3370a..1c4a68499dc 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -13,12 +13,14 @@ extern void usb_disable_device (struct usb_device *dev, int skip_ep0);
extern int usb_get_device_descriptor(struct usb_device *dev,
unsigned int size);
+extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern void usb_lock_all_devices(void);
extern void usb_unlock_all_devices(void);
extern void usb_kick_khubd(struct usb_device *dev);
+extern void usb_suspend_root_hub(struct usb_device *hdev);
extern void usb_resume_root_hub(struct usb_device *dev);
extern int usb_hub_init(void);
@@ -28,6 +30,28 @@ extern void usb_major_cleanup(void);
extern int usb_host_init(void);
extern void usb_host_cleanup(void);
+extern int usb_suspend_device(struct usb_device *dev);
+extern int usb_resume_device(struct usb_device *dev);
+
+
+/* Interfaces and their "power state" are owned by usbcore */
+
+static inline void mark_active(struct usb_interface *f)
+{
+ f->dev.power.power_state.event = PM_EVENT_ON;
+}
+
+static inline void mark_quiesced(struct usb_interface *f)
+{
+ f->dev.power.power_state.event = PM_EVENT_FREEZE;
+}
+
+static inline int is_active(struct usb_interface *f)
+{
+ return f->dev.power.power_state.event == PM_EVENT_ON;
+}
+
+
/* for labeling diagnostics */
extern const char *usbcore_name;
@@ -39,9 +63,6 @@ extern void usbfs_conn_disc_event(void);
extern int usbdev_init(void);
extern void usbdev_cleanup(void);
-extern void usbdev_add(struct usb_device *dev);
-extern void usbdev_remove(struct usb_device *dev);
-extern struct usb_device *usbdev_lookup_minor(int minor);
struct dev_state {
struct list_head list; /* state list */
@@ -58,3 +79,9 @@ struct dev_state {
unsigned long ifclaimed;
};
+/* internal notify stuff */
+extern void usb_notify_add_device(struct usb_device *udev);
+extern void usb_notify_remove_device(struct usb_device *udev);
+extern void usb_notify_add_bus(struct usb_bus *ubus);
+extern void usb_notify_remove_bus(struct usb_bus *ubus);
+
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 503201764f6..02106bebd5c 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -967,6 +967,7 @@ static int dummy_udc_resume (struct device *dev)
static struct device_driver dummy_udc_driver = {
.name = (char *) gadget_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = dummy_udc_probe,
.remove = dummy_udc_remove,
@@ -1751,7 +1752,7 @@ static int dummy_hub_control (
return retval;
}
-static int dummy_hub_suspend (struct usb_hcd *hcd)
+static int dummy_bus_suspend (struct usb_hcd *hcd)
{
struct dummy *dum = hcd_to_dummy (hcd);
@@ -1762,7 +1763,7 @@ static int dummy_hub_suspend (struct usb_hcd *hcd)
return 0;
}
-static int dummy_hub_resume (struct usb_hcd *hcd)
+static int dummy_bus_resume (struct usb_hcd *hcd)
{
struct dummy *dum = hcd_to_dummy (hcd);
@@ -1894,8 +1895,8 @@ static const struct hc_driver dummy_hcd = {
.hub_status_data = dummy_hub_status,
.hub_control = dummy_hub_control,
- .hub_suspend = dummy_hub_suspend,
- .hub_resume = dummy_hub_resume,
+ .bus_suspend = dummy_bus_suspend,
+ .bus_resume = dummy_bus_resume,
};
static int dummy_hcd_probe (struct device *dev)
@@ -1936,13 +1937,6 @@ static int dummy_hcd_suspend (struct device *dev, pm_message_t state)
dev_dbg (dev, "%s\n", __FUNCTION__);
hcd = dev_get_drvdata (dev);
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- usb_lock_device (hcd->self.root_hub);
- dummy_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
hcd->state = HC_STATE_SUSPENDED;
return 0;
}
@@ -1955,19 +1949,13 @@ static int dummy_hcd_resume (struct device *dev)
hcd = dev_get_drvdata (dev);
hcd->state = HC_STATE_RUNNING;
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- usb_lock_device (hcd->self.root_hub);
- dummy_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
usb_hcd_poll_rh_status (hcd);
return 0;
}
static struct device_driver dummy_hcd_driver = {
.name = (char *) driver_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = dummy_hcd_probe,
.remove = dummy_hcd_remove,
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index f1024e804d5..8f402f85e1c 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2533,6 +2533,7 @@ static struct usb_gadget_driver eth_driver = {
.driver = {
.name = (char *) shortname,
+ .owner = THIS_MODULE,
// .shutdown = ...
// .suspend = ...
// .resume = ...
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index a41d9d4baee..ea09aaa3cab 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -224,6 +224,7 @@
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/kthread.h>
#include <linux/limits.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -669,7 +670,6 @@ struct fsg_dev {
wait_queue_head_t thread_wqh;
int thread_wakeup_needed;
struct completion thread_notifier;
- int thread_pid;
struct task_struct *thread_task;
sigset_t thread_signal_mask;
@@ -1084,7 +1084,6 @@ static void wakeup_thread(struct fsg_dev *fsg)
static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
{
unsigned long flags;
- struct task_struct *thread_task;
/* Do nothing if a higher-priority exception is already in progress.
* If a lower-or-equal priority exception is in progress, preempt it
@@ -1093,9 +1092,9 @@ static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
if (fsg->state <= new_state) {
fsg->exception_req_tag = fsg->ep0_req_tag;
fsg->state = new_state;
- thread_task = fsg->thread_task;
- if (thread_task)
- send_sig_info(SIGUSR1, SEND_SIG_FORCED, thread_task);
+ if (fsg->thread_task)
+ send_sig_info(SIGUSR1, SEND_SIG_FORCED,
+ fsg->thread_task);
}
spin_unlock_irqrestore(&fsg->lock, flags);
}
@@ -3383,11 +3382,6 @@ static int fsg_main_thread(void *fsg_)
{
struct fsg_dev *fsg = (struct fsg_dev *) fsg_;
- fsg->thread_task = current;
-
- /* Release all our userspace resources */
- daemonize("file-storage-gadget");
-
/* Allow the thread to be killed by a signal, but set the signal mask
* to block everything but INT, TERM, KILL, and USR1. */
siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) |
@@ -3400,9 +3394,6 @@ static int fsg_main_thread(void *fsg_)
* that expects a __user pointer and it will work okay. */
set_fs(get_ds());
- /* Wait for the gadget registration to finish up */
- wait_for_completion(&fsg->thread_notifier);
-
/* The main loop */
while (fsg->state != FSG_STATE_TERMINATED) {
if (exception_in_progress(fsg) || signal_pending(current)) {
@@ -3440,8 +3431,9 @@ static int fsg_main_thread(void *fsg_)
spin_unlock_irq(&fsg->lock);
}
+ spin_lock_irq(&fsg->lock);
fsg->thread_task = NULL;
- flush_signals(current);
+ spin_unlock_irq(&fsg->lock);
/* In case we are exiting because of a signal, unregister the
* gadget driver and close the backing file. */
@@ -3831,12 +3823,11 @@ static int __init fsg_bind(struct usb_gadget *gadget)
/* Create the LUNs, open their backing files, and register the
* LUN devices in sysfs. */
- fsg->luns = kmalloc(i * sizeof(struct lun), GFP_KERNEL);
+ fsg->luns = kzalloc(i * sizeof(struct lun), GFP_KERNEL);
if (!fsg->luns) {
rc = -ENOMEM;
goto out;
}
- memset(fsg->luns, 0, i * sizeof(struct lun));
fsg->nluns = i;
for (i = 0; i < fsg->nluns; ++i) {
@@ -3959,10 +3950,12 @@ static int __init fsg_bind(struct usb_gadget *gadget)
sprintf(&serial[i], "%02X", c);
}
- if ((rc = kernel_thread(fsg_main_thread, fsg, (CLONE_VM | CLONE_FS |
- CLONE_FILES))) < 0)
+ fsg->thread_task = kthread_create(fsg_main_thread, fsg,
+ "file-storage-gadget");
+ if (IS_ERR(fsg->thread_task)) {
+ rc = PTR_ERR(fsg->thread_task);
goto out;
- fsg->thread_pid = rc;
+ }
INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
@@ -3994,7 +3987,12 @@ static int __init fsg_bind(struct usb_gadget *gadget)
DBG(fsg, "removable=%d, stall=%d, buflen=%u\n",
mod_data.removable, mod_data.can_stall,
mod_data.buflen);
- DBG(fsg, "I/O thread pid: %d\n", fsg->thread_pid);
+ DBG(fsg, "I/O thread pid: %d\n", fsg->thread_task->pid);
+
+ set_bit(REGISTERED, &fsg->atomic_bitflags);
+
+ /* Tell the thread to start working */
+ wake_up_process(fsg->thread_task);
return 0;
autoconf_fail:
@@ -4046,6 +4044,7 @@ static struct usb_gadget_driver fsg_driver = {
.driver = {
.name = (char *) shortname,
+ .owner = THIS_MODULE,
// .release = ...
// .suspend = ...
// .resume = ...
@@ -4057,10 +4056,9 @@ static int __init fsg_alloc(void)
{
struct fsg_dev *fsg;
- fsg = kmalloc(sizeof *fsg, GFP_KERNEL);
+ fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
if (!fsg)
return -ENOMEM;
- memset(fsg, 0, sizeof *fsg);
spin_lock_init(&fsg->lock);
init_rwsem(&fsg->filesem);
init_waitqueue_head(&fsg->thread_wqh);
@@ -4086,15 +4084,9 @@ static int __init fsg_init(void)
if ((rc = fsg_alloc()) != 0)
return rc;
fsg = the_fsg;
- if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) {
+ if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0)
fsg_free(fsg);
- return rc;
- }
- set_bit(REGISTERED, &fsg->atomic_bitflags);
-
- /* Tell the thread to start working */
- complete(&fsg->thread_notifier);
- return 0;
+ return rc;
}
module_init(fsg_init);
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index b0f3cd63e3b..654469778ab 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -1970,6 +1970,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids);
static struct pci_driver goku_pci_driver = {
.name = (char *) driver_name,
.id_table = pci_ids,
+ .owner = THIS_MODULE,
.probe = goku_probe,
.remove = goku_remove,
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 012d1e5f152..9b3673904da 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -2140,6 +2140,7 @@ static int lh7a40x_udc_remove(struct device *_dev)
static struct device_driver udc_driver = {
.name = (char *)driver_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = lh7a40x_udc_probe,
.remove = lh7a40x_udc_remove
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index c32e1f7476d..0dc6bb00bf7 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2948,6 +2948,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids);
static struct pci_driver net2280_pci_driver = {
.name = (char *) driver_name,
.id_table = pci_ids,
+ .owner = THIS_MODULE,
.probe = net2280_probe,
.remove = net2280_remove,
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index b7885dc0f42..41c96b0afbb 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -691,7 +691,7 @@ static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
}
static void
-finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status)
+finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status, int one)
{
u16 count;
@@ -699,6 +699,8 @@ finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status)
ep->dma_counter = (u16) (req->req.dma + req->req.actual);
count = dma_dest_len(ep, req->req.dma + req->req.actual);
count += req->req.actual;
+ if (one)
+ count--;
if (count <= req->req.length)
req->req.actual = count;
@@ -747,7 +749,7 @@ static void dma_irq(struct omap_udc *udc, u16 irq_src)
if (!list_empty(&ep->queue)) {
req = container_of(ep->queue.next,
struct omap_req, queue);
- finish_out_dma(ep, req, 0);
+ finish_out_dma(ep, req, 0, dman_stat & UDC_DMA_RX_SB);
}
UDC_IRQ_SRC_REG = UDC_RXN_EOT;
@@ -925,7 +927,7 @@ static void dma_channel_release(struct omap_ep *ep)
while (UDC_RXDMA_CFG_REG & mask)
udelay(10);
if (req)
- finish_out_dma(ep, req, -ECONNRESET);
+ finish_out_dma(ep, req, -ECONNRESET, 0);
}
omap_free_dma(ep->lch);
ep->dma_channel = 0;
@@ -1786,8 +1788,12 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
udc->driver->suspend(&udc->gadget);
spin_lock(&udc->lock);
}
+ if (udc->transceiver)
+ otg_set_suspend(udc->transceiver, 1);
} else {
VDBG("resume\n");
+ if (udc->transceiver)
+ otg_set_suspend(udc->transceiver, 0);
if (udc->gadget.speed == USB_SPEED_FULL
&& udc->driver->resume) {
spin_unlock(&udc->lock);
@@ -2943,6 +2949,7 @@ static int omap_udc_resume(struct device *dev)
static struct device_driver udc_driver = {
.name = (char *) driver_name,
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = omap_udc_probe,
.remove = __exit_p(omap_udc_remove),
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 647028590b2..f83a9262f95 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2631,6 +2631,7 @@ static int pxa2xx_udc_resume(struct device *dev)
static struct device_driver udc_driver = {
.name = "pxa2xx-udc",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = pxa2xx_udc_probe,
.shutdown = pxa2xx_udc_shutdown,
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index ec9c424f1d9..6c58636e914 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -1302,6 +1302,7 @@ static struct usb_gadget_driver zero_driver = {
.driver = {
.name = (char *) shortname,
+ .owner = THIS_MODULE,
// .shutdown = ...
// .suspend = ...
// .resume = ...
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 350d14fc1cc..58321d3f314 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -1,8 +1,9 @@
#
-# Makefile for USB Host Controller Driver
-# framework and drivers
+# Makefile for USB Host Controller Drivers
#
+obj-$(CONFIG_PCI) += pci-quirks.o
+
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f5eb9e7b5b1..af3c05eb86f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -182,6 +182,9 @@ static int ehci_halt (struct ehci_hcd *ehci)
{
u32 temp = readl (&ehci->regs->status);
+ /* disable any irqs left enabled by previous code */
+ writel (0, &ehci->regs->intr_enable);
+
if ((temp & STS_HALT) != 0)
return 0;
@@ -297,50 +300,17 @@ static void ehci_watchdog (unsigned long param)
spin_unlock_irqrestore (&ehci->lock, flags);
}
-#ifdef CONFIG_PCI
-
-/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
- * off the controller (maybe it can boot from highspeed USB disks).
+/* Reboot notifiers kick in for silicon on any bus (not just pci, etc).
+ * This forcibly disables dma and IRQs, helping kexec and other cases
+ * where the next system software may expect clean state.
*/
-static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
-{
- struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
-
- /* always say Linux will own the hardware */
- pci_write_config_byte(pdev, where + 3, 1);
-
- /* maybe wait a while for BIOS to respond */
- if (cap & (1 << 16)) {
- int msec = 5000;
-
- do {
- msleep(10);
- msec -= 10;
- pci_read_config_dword(pdev, where, &cap);
- } while ((cap & (1 << 16)) && msec);
- if (cap & (1 << 16)) {
- ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
- where, cap);
- // some BIOS versions seem buggy...
- // return 1;
- ehci_warn (ehci, "continuing after BIOS bug...\n");
- /* disable all SMIs, and clear "BIOS owns" flag */
- pci_write_config_dword(pdev, where + 4, 0);
- pci_write_config_byte(pdev, where + 2, 0);
- } else
- ehci_dbg(ehci, "BIOS handoff succeeded\n");
- }
- return 0;
-}
-
-#endif
-
static int
ehci_reboot (struct notifier_block *self, unsigned long code, void *null)
{
struct ehci_hcd *ehci;
ehci = container_of (self, struct ehci_hcd, reboot_notifier);
+ (void) ehci_halt (ehci);
/* make BIOS/etc use companion controller during reboot */
writel (0, &ehci->regs->configured_flag);
@@ -363,156 +333,90 @@ static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
msleep(20);
}
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
+ */
+static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
+{
+ timer_action_done (ehci, TIMER_IO_WATCHDOG);
+ if (ehci->reclaim_ready)
+ end_unlink_async (ehci, regs);
+
+ /* another CPU may drop ehci->lock during a schedule scan while
+ * it reports urb completions. this flag guards against bogus
+ * attempts at re-entrant schedule scanning.
+ */
+ if (ehci->scanning)
+ return;
+ ehci->scanning = 1;
+ scan_async (ehci, regs);
+ if (ehci->next_uframe != -1)
+ scan_periodic (ehci, regs);
+ ehci->scanning = 0;
-/* called by khubd or root hub init threads */
+ /* the IO watchdog guards against hardware or driver bugs that
+ * misplace IRQs, and should let us run completely without IRQs.
+ * such lossage has been observed on both VT6202 and VT8235.
+ */
+ if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
+ (ehci->async->qh_next.ptr != NULL ||
+ ehci->periodic_sched != 0))
+ timer_action (ehci, TIMER_IO_WATCHDOG);
+}
-static int ehci_hc_reset (struct usb_hcd *hcd)
+static void ehci_stop (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 temp;
- unsigned count = 256/4;
- spin_lock_init (&ehci->lock);
+ ehci_dbg (ehci, "stop\n");
- ehci->caps = hcd->regs;
- ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
- dbg_hcs_params (ehci, "reset");
- dbg_hcc_params (ehci, "reset");
+ /* Turn off port power on all root hub ports. */
+ ehci_port_power (ehci, 0);
- /* cache this readonly data; minimize chip reads */
- ehci->hcs_params = readl (&ehci->caps->hcs_params);
+ /* no more interrupts ... */
+ del_timer_sync (&ehci->watchdog);
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ spin_lock_irq(&ehci->lock);
+ if (HC_IS_RUNNING (hcd->state))
+ ehci_quiesce (ehci);
- switch (pdev->vendor) {
- case PCI_VENDOR_ID_TDI:
- if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
- ehci->is_tdi_rh_tt = 1;
- tdi_reset (ehci);
- }
- break;
- case PCI_VENDOR_ID_AMD:
- /* AMD8111 EHCI doesn't work, according to AMD errata */
- if (pdev->device == 0x7463) {
- ehci_info (ehci, "ignoring AMD8111 (errata)\n");
- return -EIO;
- }
- break;
- case PCI_VENDOR_ID_NVIDIA:
- /* NVidia reports that certain chips don't handle
- * QH, ITD, or SITD addresses above 2GB. (But TD,
- * data buffer, and periodic schedule are normal.)
- */
- switch (pdev->device) {
- case 0x003c: /* MCP04 */
- case 0x005b: /* CK804 */
- case 0x00d8: /* CK8 */
- case 0x00e8: /* CK8S */
- if (pci_set_consistent_dma_mask(pdev,
- DMA_31BIT_MASK) < 0)
- ehci_warn (ehci, "can't enable NVidia "
- "workaround for >2GB RAM\n");
- break;
- }
- break;
- }
+ ehci_reset (ehci);
+ writel (0, &ehci->regs->intr_enable);
+ spin_unlock_irq(&ehci->lock);
- /* optional debug port, normally in the first BAR */
- temp = pci_find_capability (pdev, 0x0a);
- if (temp) {
- pci_read_config_dword(pdev, temp, &temp);
- temp >>= 16;
- if ((temp & (3 << 13)) == (1 << 13)) {
- temp &= 0x1fff;
- ehci->debug = hcd->regs + temp;
- temp = readl (&ehci->debug->control);
- ehci_info (ehci, "debug port %d%s\n",
- HCS_DEBUG_PORT(ehci->hcs_params),
- (temp & DBGP_ENABLED)
- ? " IN USE"
- : "");
- if (!(temp & DBGP_ENABLED))
- ehci->debug = NULL;
- }
- }
+ /* let companion controllers work when we aren't */
+ writel (0, &ehci->regs->configured_flag);
+ unregister_reboot_notifier (&ehci->reboot_notifier);
- temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
- } else
- temp = 0;
-
- /* EHCI 0.96 and later may have "extended capabilities" */
- while (temp && count--) {
- u32 cap;
-
- pci_read_config_dword (to_pci_dev(hcd->self.controller),
- temp, &cap);
- ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
- switch (cap & 0xff) {
- case 1: /* BIOS/SMM/... handoff */
- if (bios_handoff (ehci, temp, cap) != 0)
- return -EOPNOTSUPP;
- break;
- case 0: /* illegal reserved capability */
- ehci_warn (ehci, "illegal capability!\n");
- cap = 0;
- /* FALLTHROUGH */
- default: /* unknown */
- break;
- }
- temp = (cap >> 8) & 0xff;
- }
- if (!count) {
- ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
- return -EIO;
- }
- if (ehci_is_TDI(ehci))
- ehci_reset (ehci);
-#endif
+ remove_debug_files (ehci);
- ehci_port_power (ehci, 0);
+ /* root hub is shut down separately (first, when possible) */
+ spin_lock_irq (&ehci->lock);
+ if (ehci->async)
+ ehci_work (ehci, NULL);
+ spin_unlock_irq (&ehci->lock);
+ ehci_mem_cleanup (ehci);
- /* at least the Genesys GL880S needs fixup here */
- temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
- temp &= 0x0f;
- if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
- ehci_dbg (ehci, "bogus port configuration: "
- "cc=%d x pcc=%d < ports=%d\n",
- HCS_N_CC(ehci->hcs_params),
- HCS_N_PCC(ehci->hcs_params),
- HCS_N_PORTS(ehci->hcs_params));
-
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev;
-
- pdev = to_pci_dev(hcd->self.controller);
- switch (pdev->vendor) {
- case 0x17a0: /* GENESYS */
- /* GL880S: should be PORTS=2 */
- temp |= (ehci->hcs_params & ~0xf);
- ehci->hcs_params = temp;
- break;
- case PCI_VENDOR_ID_NVIDIA:
- /* NF4: should be PCC=10 */
- break;
- }
- }
+#ifdef EHCI_STATS
+ ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
+ ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
+ ehci->stats.lost_iaa);
+ ehci_dbg (ehci, "complete %ld unlink %ld\n",
+ ehci->stats.complete, ehci->stats.unlink);
#endif
- }
- /* force HC to halt state */
- return ehci_halt (ehci);
+ dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
}
-static int ehci_start (struct usb_hcd *hcd)
+static int ehci_run (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
int retval;
u32 hcc_params;
- u8 sbrn = 0;
int first;
/* skip some things on restart paths */
@@ -551,27 +455,6 @@ static int ehci_start (struct usb_hcd *hcd)
}
writel (ehci->periodic_dma, &ehci->regs->frame_list);
-#ifdef CONFIG_PCI
- if (hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev;
- u16 port_wake;
-
- pdev = to_pci_dev(hcd->self.controller);
-
- /* Serial Bus Release Number is at PCI 0x60 offset */
- pci_read_config_byte(pdev, 0x60, &sbrn);
-
- /* port wake capability, reported by boot firmware */
- pci_read_config_word(pdev, 0x62, &port_wake);
- hcd->can_wakeup = (port_wake & 1) != 0;
-
- /* help hc dma work well with cachelines */
- retval = pci_set_mwi(pdev);
- if (retval)
- ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
- }
-#endif
-
/*
* dedicate a qh for the async ring head, since we couldn't unlink
* a 'real' qh without stopping the async schedule [4.8]. use it
@@ -667,7 +550,7 @@ static int ehci_start (struct usb_hcd *hcd)
temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
ehci_info (ehci,
"USB %x.%x %s, EHCI %x.%02x, driver %s\n",
- ((sbrn & 0xf0)>>4), (sbrn & 0x0f),
+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
first ? "initialized" : "restarted",
temp >> 8, temp & 0xff, DRIVER_VERSION);
@@ -679,188 +562,6 @@ static int ehci_start (struct usb_hcd *hcd)
return 0;
}
-/* always called by thread; normally rmmod */
-
-static void ehci_stop (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-
- ehci_dbg (ehci, "stop\n");
-
- /* Turn off port power on all root hub ports. */
- ehci_port_power (ehci, 0);
-
- /* no more interrupts ... */
- del_timer_sync (&ehci->watchdog);
-
- spin_lock_irq(&ehci->lock);
- if (HC_IS_RUNNING (hcd->state))
- ehci_quiesce (ehci);
-
- ehci_reset (ehci);
- writel (0, &ehci->regs->intr_enable);
- spin_unlock_irq(&ehci->lock);
-
- /* let companion controllers work when we aren't */
- writel (0, &ehci->regs->configured_flag);
- unregister_reboot_notifier (&ehci->reboot_notifier);
-
- remove_debug_files (ehci);
-
- /* root hub is shut down separately (first, when possible) */
- spin_lock_irq (&ehci->lock);
- if (ehci->async)
- ehci_work (ehci, NULL);
- spin_unlock_irq (&ehci->lock);
- ehci_mem_cleanup (ehci);
-
-#ifdef EHCI_STATS
- ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
- ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
- ehci->stats.lost_iaa);
- ehci_dbg (ehci, "complete %ld unlink %ld\n",
- ehci->stats.complete, ehci->stats.unlink);
-#endif
-
- dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
-}
-
-static int ehci_get_frame (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_PM
-
-/* suspend/resume, section 4.3 */
-
-/* These routines rely on the bus (pci, platform, etc)
- * to handle powerdown and wakeup, and currently also on
- * transceivers that don't need any software attention to set up
- * the right sort of wakeup.
- */
-
-static int ehci_suspend (struct usb_hcd *hcd, pm_message_t message)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-
- if (time_before (jiffies, ehci->next_statechange))
- msleep (100);
-
-#ifdef CONFIG_USB_SUSPEND
- (void) usb_suspend_device (hcd->self.root_hub, message);
-#else
- usb_lock_device (hcd->self.root_hub);
- (void) ehci_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- // save (PCI) FLADJ in case of Vaux power loss
- // ... we'd only use it to handle clock skew
-
- return 0;
-}
-
-static int ehci_resume (struct usb_hcd *hcd)
-{
- struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- unsigned port;
- struct usb_device *root = hcd->self.root_hub;
- int retval = -EINVAL;
-
- // maybe restore (PCI) FLADJ
-
- if (time_before (jiffies, ehci->next_statechange))
- msleep (100);
-
- /* If any port is suspended (or owned by the companion),
- * we know we can/must resume the HC (and mustn't reset it).
- */
- for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
- u32 status;
- port--;
- status = readl (&ehci->regs->port_status [port]);
- if (!(status & PORT_POWER))
- continue;
- if (status & (PORT_SUSPEND | PORT_OWNER)) {
- down (&hcd->self.root_hub->serialize);
- retval = ehci_hub_resume (hcd);
- up (&hcd->self.root_hub->serialize);
- break;
- }
- if (!root->children [port])
- continue;
- dbg_port (ehci, __FUNCTION__, port + 1, status);
- usb_set_device_state (root->children[port],
- USB_STATE_NOTATTACHED);
- }
-
- /* Else reset, to cope with power loss or flush-to-storage
- * style "resume" having activated BIOS during reboot.
- */
- if (port == 0) {
- (void) ehci_halt (ehci);
- (void) ehci_reset (ehci);
- (void) ehci_hc_reset (hcd);
-
- /* emptying the schedule aborts any urbs */
- spin_lock_irq (&ehci->lock);
- if (ehci->reclaim)
- ehci->reclaim_ready = 1;
- ehci_work (ehci, NULL);
- spin_unlock_irq (&ehci->lock);
-
- /* restart; khubd will disconnect devices */
- retval = ehci_start (hcd);
-
- /* here we "know" root ports should always stay powered;
- * but some controllers may lose all power.
- */
- ehci_port_power (ehci, 1);
- }
-
- return retval;
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * ehci_work is called from some interrupts, timers, and so on.
- * it calls driver completion functions, after dropping ehci->lock.
- */
-static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
-{
- timer_action_done (ehci, TIMER_IO_WATCHDOG);
- if (ehci->reclaim_ready)
- end_unlink_async (ehci, regs);
-
- /* another CPU may drop ehci->lock during a schedule scan while
- * it reports urb completions. this flag guards against bogus
- * attempts at re-entrant schedule scanning.
- */
- if (ehci->scanning)
- return;
- ehci->scanning = 1;
- scan_async (ehci, regs);
- if (ehci->next_uframe != -1)
- scan_periodic (ehci, regs);
- ehci->scanning = 0;
-
- /* the IO watchdog guards against hardware or driver bugs that
- * misplace IRQs, and should let us run completely without IRQs.
- * such lossage has been observed on both VT6202 and VT8235.
- */
- if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) &&
- (ehci->async->qh_next.ptr != NULL ||
- ehci->periodic_sched != 0))
- timer_action (ehci, TIMER_IO_WATCHDOG);
-}
-
/*-------------------------------------------------------------------------*/
static irqreturn_t ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
@@ -1171,106 +872,24 @@ done:
return;
}
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ehci_driver = {
- .description = hcd_name,
- .product_desc = "EHCI Host Controller",
- .hcd_priv_size = sizeof(struct ehci_hcd),
-
- /*
- * generic hardware linkage
- */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /*
- * basic lifecycle operations
- */
- .reset = ehci_hc_reset,
- .start = ehci_start,
-#ifdef CONFIG_PM
- .suspend = ehci_suspend,
- .resume = ehci_resume,
-#endif
- .stop = ehci_stop,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
-
- /*
- * scheduling support
- */
- .get_frame_number = ehci_get_frame,
-
- /*
- * root hub support
- */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .hub_suspend = ehci_hub_suspend,
- .hub_resume = ehci_hub_resume,
-};
+static int ehci_get_frame (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
+}
/*-------------------------------------------------------------------------*/
-/* EHCI 1.0 doesn't require PCI */
-
-#ifdef CONFIG_PCI
-
-/* PCI driver selection metadata; PCI hotplugging uses this */
-static const struct pci_device_id pci_ids [] = { {
- /* handle any USB 2.0 EHCI controller */
- PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
- .driver_data = (unsigned long) &ehci_driver,
- },
- { /* end: all zeroes */ }
-};
-MODULE_DEVICE_TABLE (pci, pci_ids);
-
-/* pci driver glue; this is a "new style" PCI driver module */
-static struct pci_driver ehci_pci_driver = {
- .name = (char *) hcd_name,
- .id_table = pci_ids,
-
- .probe = usb_hcd_pci_probe,
- .remove = usb_hcd_pci_remove,
-
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
-#endif
-};
-
-#endif /* PCI */
-
-
#define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC
MODULE_DESCRIPTION (DRIVER_INFO);
MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_LICENSE ("GPL");
-static int __init init (void)
-{
- if (usb_disabled())
- return -ENODEV;
-
- pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
- hcd_name,
- sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
- sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
-
- return pci_register_driver (&ehci_pci_driver);
-}
-module_init (init);
+#ifdef CONFIG_PCI
+#include "ehci-pci.c"
+#endif
-static void __exit cleanup (void)
-{
- pci_unregister_driver (&ehci_pci_driver);
-}
-module_exit (cleanup);
+#if !defined(CONFIG_PCI)
+#error "missing bus glue for ehci-hcd"
+#endif
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 18d3f227031..88cb4ada686 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -30,7 +30,7 @@
#ifdef CONFIG_PM
-static int ehci_hub_suspend (struct usb_hcd *hcd)
+static int ehci_bus_suspend (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int port;
@@ -83,7 +83,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd)
/* caller has locked the root hub, and should reset/reinit on error */
-static int ehci_hub_resume (struct usb_hcd *hcd)
+static int ehci_bus_resume (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
@@ -159,8 +159,8 @@ static int ehci_hub_resume (struct usb_hcd *hcd)
#else
-#define ehci_hub_suspend NULL
-#define ehci_hub_resume NULL
+#define ehci_bus_suspend NULL
+#define ehci_bus_resume NULL
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
new file mode 100644
index 00000000000..14500885396
--- /dev/null
+++ b/drivers/usb/host/ehci-pci.c
@@ -0,0 +1,415 @@
+/*
+ * EHCI HCD (Host Controller Driver) PCI Bus Glue.
+ *
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef CONFIG_PCI
+#error "This file is PCI bus glue. CONFIG_PCI must be defined."
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
+ * off the controller (maybe it can boot from highspeed USB disks).
+ */
+static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
+{
+ struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
+
+ /* always say Linux will own the hardware */
+ pci_write_config_byte(pdev, where + 3, 1);
+
+ /* maybe wait a while for BIOS to respond */
+ if (cap & (1 << 16)) {
+ int msec = 5000;
+
+ do {
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, where, &cap);
+ } while ((cap & (1 << 16)) && msec);
+ if (cap & (1 << 16)) {
+ ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
+ where, cap);
+ // some BIOS versions seem buggy...
+ // return 1;
+ ehci_warn (ehci, "continuing after BIOS bug...\n");
+ /* disable all SMIs, and clear "BIOS owns" flag */
+ pci_write_config_dword(pdev, where + 4, 0);
+ pci_write_config_byte(pdev, where + 2, 0);
+ } else
+ ehci_dbg(ehci, "BIOS handoff succeeded\n");
+ }
+ return 0;
+}
+
+/* called by khubd or root hub init threads */
+static int ehci_pci_reset (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ u32 temp;
+ unsigned count = 256/4;
+
+ spin_lock_init (&ehci->lock);
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
+ dbg_hcs_params (ehci, "reset");
+ dbg_hcc_params (ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl (&ehci->caps->hcs_params);
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ switch (pdev->vendor) {
+ case PCI_VENDOR_ID_TDI:
+ if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
+ ehci->is_tdi_rh_tt = 1;
+ tdi_reset (ehci);
+ }
+ break;
+ case PCI_VENDOR_ID_AMD:
+ /* AMD8111 EHCI doesn't work, according to AMD errata */
+ if (pdev->device == 0x7463) {
+ ehci_info (ehci, "ignoring AMD8111 (errata)\n");
+ return -EIO;
+ }
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NVidia reports that certain chips don't handle
+ * QH, ITD, or SITD addresses above 2GB. (But TD,
+ * data buffer, and periodic schedule are normal.)
+ */
+ switch (pdev->device) {
+ case 0x003c: /* MCP04 */
+ case 0x005b: /* CK804 */
+ case 0x00d8: /* CK8 */
+ case 0x00e8: /* CK8S */
+ if (pci_set_consistent_dma_mask(pdev,
+ DMA_31BIT_MASK) < 0)
+ ehci_warn (ehci, "can't enable NVidia "
+ "workaround for >2GB RAM\n");
+ break;
+ }
+ break;
+ }
+
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability (pdev, 0x0a);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if ((temp & (3 << 13)) == (1 << 13)) {
+ temp &= 0x1fff;
+ ehci->debug = hcd->regs + temp;
+ temp = readl (&ehci->debug->control);
+ ehci_info (ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(ehci->hcs_params),
+ (temp & DBGP_ENABLED)
+ ? " IN USE"
+ : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
+ temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
+ } else
+ temp = 0;
+
+ /* EHCI 0.96 and later may have "extended capabilities" */
+ while (temp && count--) {
+ u32 cap;
+
+ pci_read_config_dword (to_pci_dev(hcd->self.controller),
+ temp, &cap);
+ ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
+ switch (cap & 0xff) {
+ case 1: /* BIOS/SMM/... handoff */
+ if (bios_handoff (ehci, temp, cap) != 0)
+ return -EOPNOTSUPP;
+ break;
+ case 0: /* illegal reserved capability */
+ ehci_warn (ehci, "illegal capability!\n");
+ cap = 0;
+ /* FALLTHROUGH */
+ default: /* unknown */
+ break;
+ }
+ temp = (cap >> 8) & 0xff;
+ }
+ if (!count) {
+ ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
+ return -EIO;
+ }
+ if (ehci_is_TDI(ehci))
+ ehci_reset (ehci);
+
+ ehci_port_power (ehci, 0);
+
+ /* at least the Genesys GL880S needs fixup here */
+ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
+ temp &= 0x0f;
+ if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
+ ehci_dbg (ehci, "bogus port configuration: "
+ "cc=%d x pcc=%d < ports=%d\n",
+ HCS_N_CC(ehci->hcs_params),
+ HCS_N_PCC(ehci->hcs_params),
+ HCS_N_PORTS(ehci->hcs_params));
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(hcd->self.controller);
+ switch (pdev->vendor) {
+ case 0x17a0: /* GENESYS */
+ /* GL880S: should be PORTS=2 */
+ temp |= (ehci->hcs_params & ~0xf);
+ ehci->hcs_params = temp;
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NF4: should be PCC=10 */
+ break;
+ }
+ }
+ }
+
+ /* force HC to halt state */
+ return ehci_halt (ehci);
+}
+
+static int ehci_pci_start (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ int result = 0;
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+ u16 port_wake;
+
+ pdev = to_pci_dev(hcd->self.controller);
+
+ /* Serial Bus Release Number is at PCI 0x60 offset */
+ pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+
+ /* port wake capability, reported by boot firmware */
+ pci_read_config_word(pdev, 0x62, &port_wake);
+ hcd->can_wakeup = (port_wake & 1) != 0;
+
+ /* help hc dma work well with cachelines */
+ result = pci_set_mwi(pdev);
+ if (result)
+ ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
+ }
+
+ return ehci_run (hcd);
+}
+
+/* always called by thread; normally rmmod */
+
+static void ehci_pci_stop (struct usb_hcd *hcd)
+{
+ ehci_stop (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+/* suspend/resume, section 4.3 */
+
+/* These routines rely on the bus (pci, platform, etc)
+ * to handle powerdown and wakeup, and currently also on
+ * transceivers that don't need any software attention to set up
+ * the right sort of wakeup.
+ */
+
+static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+#ifdef CONFIG_USB_SUSPEND
+ (void) usb_suspend_device (hcd->self.root_hub);
+#else
+ usb_lock_device (hcd->self.root_hub);
+ (void) ehci_bus_suspend (hcd);
+ usb_unlock_device (hcd->self.root_hub);
+#endif
+
+ // save (PCI) FLADJ in case of Vaux power loss
+ // ... we'd only use it to handle clock skew
+
+ return 0;
+}
+
+static int ehci_pci_resume (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ unsigned port;
+ struct usb_device *root = hcd->self.root_hub;
+ int retval = -EINVAL;
+
+ // maybe restore (PCI) FLADJ
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+ /* If any port is suspended (or owned by the companion),
+ * we know we can/must resume the HC (and mustn't reset it).
+ */
+ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
+ u32 status;
+ port--;
+ status = readl (&ehci->regs->port_status [port]);
+ if (!(status & PORT_POWER))
+ continue;
+ if (status & (PORT_SUSPEND | PORT_OWNER)) {
+ down (&hcd->self.root_hub->serialize);
+ retval = ehci_bus_resume (hcd);
+ up (&hcd->self.root_hub->serialize);
+ break;
+ }
+ if (!root->children [port])
+ continue;
+ dbg_port (ehci, __FUNCTION__, port + 1, status);
+ usb_set_device_state (root->children[port],
+ USB_STATE_NOTATTACHED);
+ }
+
+ /* Else reset, to cope with power loss or flush-to-storage
+ * style "resume" having activated BIOS during reboot.
+ */
+ if (port == 0) {
+ (void) ehci_halt (ehci);
+ (void) ehci_reset (ehci);
+ (void) ehci_pci_reset (hcd);
+
+ /* emptying the schedule aborts any urbs */
+ spin_lock_irq (&ehci->lock);
+ if (ehci->reclaim)
+ ehci->reclaim_ready = 1;
+ ehci_work (ehci, NULL);
+ spin_unlock_irq (&ehci->lock);
+
+ /* restart; khubd will disconnect devices */
+ retval = ehci_run (hcd);
+
+ /* here we "know" root ports should always stay powered;
+ * but some controllers may lose all power.
+ */
+ ehci_port_power (ehci, 1);
+ }
+
+ return retval;
+}
+#endif
+
+static const struct hc_driver ehci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_pci_reset,
+ .start = ehci_pci_start,
+#ifdef CONFIG_PM
+ .suspend = ehci_pci_suspend,
+ .resume = ehci_pci_resume,
+#endif
+ .stop = ehci_pci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids [] = { {
+ /* handle any USB 2.0 EHCI controller */
+ PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+ .driver_data = (unsigned long) &ehci_pci_hc_driver,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ehci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+ .owner = THIS_MODULE,
+
+ .probe = usb_hcd_pci_probe,
+ .remove = usb_hcd_pci_remove,
+
+#ifdef CONFIG_PM
+ .suspend = usb_hcd_pci_suspend,
+ .resume = usb_hcd_pci_resume,
+#endif
+};
+
+static int __init ehci_hcd_pci_init (void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
+ hcd_name,
+ sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
+ sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
+
+ return pci_register_driver (&ehci_pci_driver);
+}
+module_init (ehci_hcd_pci_init);
+
+static void __exit ehci_hcd_pci_cleanup (void)
+{
+ pci_unregister_driver (&ehci_pci_driver);
+}
+module_exit (ehci_hcd_pci_cleanup);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f34a0516d35..18e257c2bdb 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -97,6 +97,7 @@ struct ehci_hcd { /* one per controller */
#else
# define COUNT(x) do {} while (0)
#endif
+ u8 sbrn; /* packed release number */
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 642f35068ce..ddb8fc59146 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -638,7 +638,7 @@ static irqreturn_t isp116x_irq(struct usb_hcd *hcd, struct pt_regs *regs)
+ msecs_to_jiffies(20) + 1);
if (intstat & HCINT_RD) {
DBG("---- remote wakeup\n");
- schedule_work(&isp116x->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
ret = IRQ_HANDLED;
}
irqstat &= ~HCuPINT_OPR;
@@ -1160,7 +1160,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd,
#ifdef CONFIG_PM
-static int isp116x_hub_suspend(struct usb_hcd *hcd)
+static int isp116x_bus_suspend(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
unsigned long flags;
@@ -1200,7 +1200,7 @@ static int isp116x_hub_suspend(struct usb_hcd *hcd)
return ret;
}
-static int isp116x_hub_resume(struct usb_hcd *hcd)
+static int isp116x_bus_resume(struct usb_hcd *hcd)
{
struct isp116x *isp116x = hcd_to_isp116x(hcd);
u32 val;
@@ -1263,21 +1263,11 @@ static int isp116x_hub_resume(struct usb_hcd *hcd)
return 0;
}
-static void isp116x_rh_resume(void *_hcd)
-{
- struct usb_hcd *hcd = _hcd;
-
- usb_resume_device(hcd->self.root_hub);
-}
#else
-#define isp116x_hub_suspend NULL
-#define isp116x_hub_resume NULL
-
-static void isp116x_rh_resume(void *_hcd)
-{
-}
+#define isp116x_bus_suspend NULL
+#define isp116x_bus_resume NULL
#endif
@@ -1636,8 +1626,8 @@ static struct hc_driver isp116x_hc_driver = {
.hub_status_data = isp116x_hub_status_data,
.hub_control = isp116x_hub_control,
- .hub_suspend = isp116x_hub_suspend,
- .hub_resume = isp116x_hub_resume,
+ .bus_suspend = isp116x_bus_suspend,
+ .bus_resume = isp116x_bus_resume,
};
/*----------------------------------------------------------------*/
@@ -1732,7 +1722,6 @@ static int __init isp116x_probe(struct device *dev)
isp116x->addr_reg = addr_reg;
spin_lock_init(&isp116x->lock);
INIT_LIST_HEAD(&isp116x->async);
- INIT_WORK(&isp116x->rh_resume, isp116x_rh_resume, hcd);
isp116x->board = dev->platform_data;
if (!isp116x->board) {
@@ -1777,16 +1766,10 @@ static int __init isp116x_probe(struct device *dev)
static int isp116x_suspend(struct device *dev, pm_message_t state)
{
int ret = 0;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
VDBG("%s: state %x\n", __func__, state);
- ret = usb_suspend_device(hcd->self.root_hub, state);
- if (!ret) {
- dev->power.power_state = state;
- INFO("%s suspended\n", hcd_name);
- } else
- ERR("%s suspend failed\n", hcd_name);
+ dev->power.power_state = state;
return ret;
}
@@ -1797,15 +1780,11 @@ static int isp116x_suspend(struct device *dev, pm_message_t state)
static int isp116x_resume(struct device *dev)
{
int ret = 0;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
VDBG("%s: state %x\n", __func__, dev->power.power_state);
- ret = usb_resume_device(hcd->self.root_hub);
- if (!ret) {
- dev->power.power_state = PMSG_ON;
- VDBG("%s resumed\n", (char *)hcd_name);
- }
+ dev->power.power_state = PMSG_ON;
+
return ret;
}
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 58873470dcf..c6fec96785f 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -253,7 +253,6 @@ static const int cc_to_error[16] = {
struct isp116x {
spinlock_t lock;
- struct work_struct rh_resume;
void __iomem *addr_reg;
void __iomem *data_reg;
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 3981bf15c8c..a277e258eb6 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -214,6 +214,11 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
@@ -259,6 +264,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
static struct device_driver ohci_hcd_au1xxx_driver = {
.name = "au1xxx-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c
index 7924c74f958..7bfffcbbd22 100644
--- a/drivers/usb/host/ohci-dbg.c
+++ b/drivers/usb/host/ohci-dbg.c
@@ -193,10 +193,6 @@ ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
maybe_print_eds (controller, "donehead",
ohci_readl (controller, &regs->donehead), next, size);
-
- /* broken fminterval means traffic won't flow! */
- ohci_dbg (controller, "fminterval %08x\n",
- ohci_readl (controller, &regs->fminterval));
}
#define dbg_port_sw(hc,num,value,next,size) \
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f8da8c7af7c..5c0c6c8a7a8 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -723,7 +723,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs)
ohci_vdbg (ohci, "resume detect\n");
ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
if (hcd->state != HC_STATE_QUIESCING)
- schedule_work(&ohci->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
}
if (ints & OHCI_INTR_WDH) {
@@ -791,7 +791,7 @@ static void ohci_stop (struct usb_hcd *hcd)
/* must not be called from interrupt context */
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+#ifdef CONFIG_PM
static int ohci_restart (struct ohci_hcd *ohci)
{
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index ce7b28da7a1..e01e77bc324 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,7 +36,7 @@
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+#ifdef CONFIG_PM
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
@@ -45,7 +45,7 @@ static void dl_done_list (struct ohci_hcd *, struct pt_regs *);
static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *);
static int ohci_restart (struct ohci_hcd *ohci);
-static int ohci_hub_suspend (struct usb_hcd *hcd)
+static int ohci_bus_suspend (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int status = 0;
@@ -73,7 +73,6 @@ static int ohci_hub_suspend (struct usb_hcd *hcd)
ohci_dbg (ohci, "suspend root hub\n");
/* First stop any processing */
- hcd->state = HC_STATE_QUIESCING;
if (ohci->hc_control & OHCI_SCHED_ENABLES) {
int limit;
@@ -108,7 +107,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd)
else
ohci->hc_control &= ~OHCI_CTRL_RWE;
- /* Suspend hub */
+ /* Suspend hub ... this is the "global (to this bus) suspend" mode,
+ * which doesn't imply ports will first be individually suspended.
+ */
ohci->hc_control &= ~OHCI_CTRL_HCFS;
ohci->hc_control |= OHCI_USB_SUSPEND;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
@@ -118,8 +119,9 @@ static int ohci_hub_suspend (struct usb_hcd *hcd)
ohci->next_statechange = jiffies + msecs_to_jiffies (5);
done:
+ /* external suspend vs self autosuspend ... same effect */
if (status == 0)
- hcd->state = HC_STATE_SUSPENDED;
+ usb_hcd_suspend_root_hub(hcd);
spin_unlock_irqrestore (&ohci->lock, flags);
return status;
}
@@ -133,7 +135,7 @@ static inline struct ed *find_head (struct ed *ed)
}
/* caller has locked the root hub */
-static int ohci_hub_resume (struct usb_hcd *hcd)
+static int ohci_bus_resume (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
u32 temp, enables;
@@ -146,7 +148,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
- /* this can happen after suspend-to-disk */
+ /* this can happen after resuming a swsusp snapshot */
if (hcd->state == HC_STATE_RESUMING) {
ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
ohci->hc_control);
@@ -169,11 +171,12 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
ohci_info (ohci, "wakeup\n");
break;
case OHCI_USB_OPER:
- ohci_dbg (ohci, "already resumed\n");
- status = 0;
+ /* this can happen after resuming a swsusp snapshot */
+ ohci_dbg (ohci, "snapshot resume? reinit\n");
+ status = -EBUSY;
break;
default: /* RESET, we lost power */
- ohci_dbg (ohci, "root hub hardware reset\n");
+ ohci_dbg (ohci, "lost power\n");
status = -EBUSY;
}
spin_unlock_irq (&ohci->lock);
@@ -198,8 +201,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
}
/* Some controllers (lucent erratum) need extra-long delays */
- hcd->state = HC_STATE_RESUMING;
- mdelay (20 /* usb 11.5.1.10 */ + 15);
+ msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
temp = ohci_readl (ohci, &ohci->regs->control);
temp &= OHCI_CTRL_HCFS;
@@ -273,28 +275,10 @@ static int ohci_hub_resume (struct usb_hcd *hcd)
(void) ohci_readl (ohci, &ohci->regs->control);
}
- hcd->state = HC_STATE_RUNNING;
return 0;
}
-static void ohci_rh_resume (void *_hcd)
-{
- struct usb_hcd *hcd = _hcd;
-
- usb_lock_device (hcd->self.root_hub);
- (void) ohci_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
-}
-
-#else
-
-static void ohci_rh_resume (void *_hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (_hcd);
- ohci_dbg(ohci, "rh_resume ??\n");
-}
-
-#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */
+#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
@@ -367,7 +351,6 @@ done:
#ifdef CONFIG_PM
/* save power by suspending idle root hubs;
* INTR_RD wakes us when there's work
- * NOTE: if we can do this, we don't need a root hub timer!
*/
if (can_suspend
&& !changed
@@ -379,8 +362,7 @@ done:
&& usb_trylock_device (hcd->self.root_hub)
) {
ohci_vdbg (ohci, "autosuspend\n");
- (void) ohci_hub_suspend (hcd);
- hcd->state = HC_STATE_RUNNING;
+ (void) ohci_bus_suspend (hcd);
usb_unlock_device (hcd->self.root_hub);
}
#endif
@@ -554,7 +536,7 @@ static int ohci_hub_control (
temp = RH_PS_POCI;
if ((ohci->hc_control & OHCI_CTRL_HCFS)
!= OHCI_USB_OPER)
- schedule_work (&ohci->rh_resume);
+ usb_hcd_resume_root_hub(hcd);
break;
case USB_PORT_FEAT_C_SUSPEND:
temp = RH_PS_PSSC;
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 859aca7be75..238fa4ade61 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -193,6 +193,11 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
@@ -239,6 +244,7 @@ static int ohci_hcd_lh7a404_drv_resume(struct device *dev)
static struct device_driver ohci_hcd_lh7a404_driver = {
.name = "lh7a404-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_lh7a404_drv_probe,
.remove = ohci_hcd_lh7a404_drv_remove,
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index 9fb83dfb1eb..bfbe328a478 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -28,7 +28,6 @@ static void ohci_hcd_init (struct ohci_hcd *ohci)
ohci->next_statechange = jiffies;
spin_lock_init (&ohci->lock);
INIT_LIST_HEAD (&ohci->pending);
- INIT_WORK (&ohci->rh_resume, ohci_rh_resume, ohci_to_hcd(ohci));
ohci->reboot_notifier.notifier_call = ohci_reboot;
}
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index a574216625a..45efeed1fcc 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -420,9 +420,9 @@ static const struct hc_driver ohci_omap_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -458,41 +458,29 @@ static int ohci_hcd_omap_drv_remove(struct device *dev)
static int ohci_omap_suspend(struct device *dev, pm_message_t message)
{
struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
- int status = -EINVAL;
-
- down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
- status = ohci_hub_suspend(ohci_to_hcd(ohci));
- if (status == 0) {
- omap_ohci_clock_power(0);
- ohci_to_hcd(ohci)->self.root_hub->state =
- USB_STATE_SUSPENDED;
- ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
- dev->power.power_state = PMSG_SUSPEND;
- }
- up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
- return status;
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ omap_ohci_clock_power(0);
+ ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
+ dev->power.power_state = PMSG_SUSPEND;
+ return 0;
}
static int ohci_omap_resume(struct device *dev)
{
struct ohci_hcd *ohci = hcd_to_ohci(dev_get_drvdata(dev));
- int status = 0;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
+
omap_ohci_clock_power(1);
-#ifdef CONFIG_USB_SUSPEND
- /* get extra cleanup even if remote wakeup isn't in use */
- status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub);
-#else
- down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
- status = ohci_hub_resume(ohci_to_hcd(ohci));
- up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
-#endif
- if (status == 0)
- dev->power.power_state = PMSG_ON;
- return status;
+ dev->power.power_state = PMSG_ON;
+ usb_hcd_resume_root_hub(dev_get_drvdata(dev));
+ return 0;
}
#endif
@@ -504,6 +492,7 @@ static int ohci_omap_resume(struct device *dev)
*/
static struct device_driver ohci_hcd_omap_driver = {
.name = "ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_omap_drv_probe,
.remove = ohci_hcd_omap_drv_remove,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index eede6be098d..bf1d5ab4aa3 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -112,23 +112,13 @@ ohci_pci_start (struct usb_hcd *hcd)
static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-
- /* suspend root hub, hoping it keeps power during suspend */
- if (time_before (jiffies, ohci->next_statechange))
- msleep (100);
-
-#ifdef CONFIG_USB_SUSPEND
- (void) usb_suspend_device (hcd->self.root_hub, message);
-#else
- usb_lock_device (hcd->self.root_hub);
- (void) ohci_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
+ /* root hub was already suspended */
- /* let things settle down a bit */
- msleep (100);
-
+ /* FIXME these PMAC things get called in the wrong places. ASIC
+ * clocks should be turned off AFTER entering D3, and on BEFORE
+ * trying to enter D0. Evidently the PCI layer doesn't currently
+ * provide the right sort of platform hooks for this ...
+ */
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
@@ -145,9 +135,6 @@ static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
static int ohci_pci_resume (struct usb_hcd *hcd)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int retval = 0;
-
#ifdef CONFIG_PPC_PMAC
if (_machine == _MACH_Pmac) {
struct device_node *of_node;
@@ -159,19 +146,8 @@ static int ohci_pci_resume (struct usb_hcd *hcd)
}
#endif /* CONFIG_PPC_PMAC */
- /* resume root hub */
- if (time_before (jiffies, ohci->next_statechange))
- msleep (100);
-#ifdef CONFIG_USB_SUSPEND
- /* get extra cleanup even if remote wakeup isn't in use */
- retval = usb_resume_device (hcd->self.root_hub);
-#else
- usb_lock_device (hcd->self.root_hub);
- retval = ohci_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- return retval;
+ usb_hcd_resume_root_hub(hcd);
+ return 0;
}
#endif /* CONFIG_PM */
@@ -218,9 +194,9 @@ static const struct hc_driver ohci_pci_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -240,6 +216,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids);
static struct pci_driver ohci_pci_driver = {
.name = (char *) hcd_name,
.id_table = pci_ids,
+ .owner = THIS_MODULE,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 25153336302..4832e57ae57 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -163,9 +163,9 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -193,10 +193,11 @@ static int ohci_hcd_ppc_soc_drv_remove(struct device *dev)
static struct device_driver ohci_hcd_ppc_soc_driver = {
.name = "ppc-soc-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_ppc_soc_drv_probe,
.remove = ohci_hcd_ppc_soc_drv_remove,
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
+#ifdef CONFIG_PM
/*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
/*.resume = ohci_hcd_ppc_soc_drv_resume,*/
#endif
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index f042261ecb8..d287dcccd41 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -278,10 +278,11 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index da7d5478f74..fab420a2ce7 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -448,11 +448,11 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
-
-#if defined(CONFIG_USB_SUSPEND) && 0
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
};
/* device driver */
@@ -474,6 +474,7 @@ static int ohci_hcd_s3c2410_drv_remove(struct device *dev)
static struct device_driver ohci_hcd_s3c2410_driver = {
.name = "s3c2410-ohci",
+ .owner = THIS_MODULE,
.bus = &platform_bus_type,
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = ohci_hcd_s3c2410_drv_remove,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 814d2be4ee7..fb3221ebbb2 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -235,10 +235,11 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
+ .start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h
index 8a9b9d9209e..caacf14371f 100644
--- a/drivers/usb/host/ohci.h
+++ b/drivers/usb/host/ohci.h
@@ -389,7 +389,6 @@ struct ohci_hcd {
unsigned long next_statechange; /* suspend/resume */
u32 fminterval; /* saved register */
- struct work_struct rh_resume;
struct notifier_block reboot_notifier;
unsigned long flags; /* for HC bugs */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
new file mode 100644
index 00000000000..b7fd3f644e1
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.c
@@ -0,0 +1,296 @@
+/*
+ * This file contains code to reset and initialize USB host controllers.
+ * Some of it includes work-arounds for PCI hardware and BIOS quirks.
+ * It may need to run early during booting -- before USB would normally
+ * initialize -- to ensure that Linux doesn't use any legacy modes.
+ *
+ * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ * (and others)
+ */
+
+#include <linux/config.h>
+#ifdef CONFIG_USB_DEBUG
+#define DEBUG
+#else
+#undef DEBUG
+#endif
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+
+
+#define UHCI_USBLEGSUP 0xc0 /* legacy support */
+#define UHCI_USBCMD 0 /* command register */
+#define UHCI_USBINTR 4 /* interrupt register */
+#define UHCI_USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
+#define UHCI_USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
+#define UHCI_USBCMD_RUN 0x0001 /* RUN/STOP bit */
+#define UHCI_USBCMD_HCRESET 0x0002 /* Host Controller reset */
+#define UHCI_USBCMD_EGSM 0x0008 /* Global Suspend Mode */
+#define UHCI_USBCMD_CONFIGURE 0x0040 /* Config Flag */
+#define UHCI_USBINTR_RESUME 0x0002 /* Resume interrupt enable */
+
+#define OHCI_CONTROL 0x04
+#define OHCI_CMDSTATUS 0x08
+#define OHCI_INTRSTATUS 0x0c
+#define OHCI_INTRENABLE 0x10
+#define OHCI_INTRDISABLE 0x14
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+
+#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
+#define EHCI_USBCMD 0 /* command register */
+#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
+#define EHCI_USBSTS 4 /* status register */
+#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
+#define EHCI_USBINTR 8 /* interrupt register */
+#define EHCI_USBLEGSUP 0 /* legacy support register */
+#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
+#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
+#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
+#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
+
+
+/*
+ * Make sure the controller is completely inactive, unable to
+ * generate interrupts or do DMA.
+ */
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+ /* Turn off PIRQ enable and SMI enable. (This also turns off the
+ * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
+ */
+ pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_RWC);
+
+ /* Reset the HC - this will force us to get a
+ * new notification of any already connected
+ * ports due to the virtual disconnect that it
+ * implies.
+ */
+ outw(UHCI_USBCMD_HCRESET, base + UHCI_USBCMD);
+ mb();
+ udelay(5);
+ if (inw(base + UHCI_USBCMD) & UHCI_USBCMD_HCRESET)
+ dev_warn(&pdev->dev, "HCRESET not completed yet!\n");
+
+ /* Just to be safe, disable interrupt requests and
+ * make sure the controller is stopped.
+ */
+ outw(0, base + UHCI_USBINTR);
+ outw(0, base + UHCI_USBCMD);
+}
+EXPORT_SYMBOL_GPL(uhci_reset_hc);
+
+/*
+ * Initialize a controller that was newly discovered or has just been
+ * resumed. In either case we can't be sure of its previous state.
+ *
+ * Returns: 1 if the controller was reset, 0 otherwise.
+ */
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
+{
+ u16 legsup;
+ unsigned int cmd, intr;
+
+ /*
+ * When restarting a suspended controller, we expect all the
+ * settings to be the same as we left them:
+ *
+ * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
+ * Controller is stopped and configured with EGSM set;
+ * No interrupts enabled except possibly Resume Detect.
+ *
+ * If any of these conditions are violated we do a complete reset.
+ */
+ pci_read_config_word(pdev, UHCI_USBLEGSUP, &legsup);
+ if (legsup & ~(UHCI_USBLEGSUP_RO | UHCI_USBLEGSUP_RWC)) {
+ dev_dbg(&pdev->dev, "%s: legsup = 0x%04x\n",
+ __FUNCTION__, legsup);
+ goto reset_needed;
+ }
+
+ cmd = inw(base + UHCI_USBCMD);
+ if ((cmd & UHCI_USBCMD_RUN) || !(cmd & UHCI_USBCMD_CONFIGURE) ||
+ !(cmd & UHCI_USBCMD_EGSM)) {
+ dev_dbg(&pdev->dev, "%s: cmd = 0x%04x\n",
+ __FUNCTION__, cmd);
+ goto reset_needed;
+ }
+
+ intr = inw(base + UHCI_USBINTR);
+ if (intr & (~UHCI_USBINTR_RESUME)) {
+ dev_dbg(&pdev->dev, "%s: intr = 0x%04x\n",
+ __FUNCTION__, intr);
+ goto reset_needed;
+ }
+ return 0;
+
+reset_needed:
+ dev_dbg(&pdev->dev, "Performing full reset\n");
+ uhci_reset_hc(pdev, base);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+
+static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
+{
+ unsigned long base = 0;
+ int i;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+ base = pci_resource_start(pdev, i);
+ break;
+ }
+
+ if (base)
+ uhci_check_and_reset_hc(pdev, base);
+}
+
+static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
+{
+ void __iomem *base;
+ int wait_time;
+ u32 control;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+/* On PA-RISC, PDC can leave IR set incorrectly; ignore it there. */
+#ifndef __hppa__
+ control = readl(base + OHCI_CONTROL);
+ if (control & OHCI_CTRL_IR) {
+ wait_time = 500; /* arbitrary; 5 seconds */
+ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+ writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+ while (wait_time > 0 &&
+ readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ wait_time -= 10;
+ msleep(10);
+ }
+ if (wait_time <= 0)
+ printk(KERN_WARNING "%s %s: early BIOS handoff "
+ "failed (BIOS bug ?)\n",
+ pdev->dev.bus_id, "OHCI");
+
+ /* reset controller, preserving RWC */
+ writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
+ }
+#endif
+
+ /*
+ * disable interrupts
+ */
+ writel(~(u32)0, base + OHCI_INTRDISABLE);
+ writel(~(u32)0, base + OHCI_INTRSTATUS);
+
+ iounmap(base);
+}
+
+static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
+{
+ int wait_time, delta;
+ void __iomem *base, *op_reg_base;
+ u32 hcc_params, val, temp;
+ u8 cap_length;
+
+ base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+ cap_length = readb(base);
+ op_reg_base = base + cap_length;
+ hcc_params = readl(base + EHCI_HCC_PARAMS);
+ hcc_params = (hcc_params >> 8) & 0xff;
+ if (hcc_params) {
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ &val);
+ if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
+ /*
+ * Ok, BIOS is in smm mode, try to hand off...
+ */
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ &temp);
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ temp | EHCI_USBLEGCTLSTS_SOOE);
+ val |= EHCI_USBLEGSUP_OS;
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ val);
+
+ wait_time = 500;
+ do {
+ msleep(10);
+ wait_time -= 10;
+ pci_read_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ &val);
+ } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
+ if (!wait_time) {
+ /*
+ * well, possibly buggy BIOS...
+ */
+ printk(KERN_WARNING "%s %s: early BIOS handoff "
+ "failed (BIOS bug ?)\n",
+ pdev->dev.bus_id, "EHCI");
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGSUP,
+ EHCI_USBLEGSUP_OS);
+ pci_write_config_dword(pdev,
+ hcc_params + EHCI_USBLEGCTLSTS,
+ 0);
+ }
+ }
+ }
+
+ /*
+ * halt EHCI & disable its interrupts in any case
+ */
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val & EHCI_USBSTS_HALTED) == 0) {
+ val = readl(op_reg_base + EHCI_USBCMD);
+ val &= ~EHCI_USBCMD_RUN;
+ writel(val, op_reg_base + EHCI_USBCMD);
+
+ wait_time = 2000;
+ delta = 100;
+ do {
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+ udelay(delta);
+ wait_time -= delta;
+ val = readl(op_reg_base + EHCI_USBSTS);
+ if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
+ break;
+ }
+ } while (wait_time > 0);
+ }
+ writel(0, op_reg_base + EHCI_USBINTR);
+ writel(0x3f, op_reg_base + EHCI_USBSTS);
+
+ iounmap(base);
+
+ return;
+}
+
+
+
+static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
+{
+ if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
+ quirk_usb_handoff_uhci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
+ quirk_usb_handoff_ohci(pdev);
+ else if (pdev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ quirk_usb_disable_ehci(pdev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index b5e7a478bc0..40169d9cf2b 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1363,7 +1363,7 @@ error:
#ifdef CONFIG_PM
static int
-sl811h_hub_suspend(struct usb_hcd *hcd)
+sl811h_bus_suspend(struct usb_hcd *hcd)
{
// SOFs off
DBG("%s\n", __FUNCTION__);
@@ -1371,7 +1371,7 @@ sl811h_hub_suspend(struct usb_hcd *hcd)
}
static int
-sl811h_hub_resume(struct usb_hcd *hcd)
+sl811h_bus_resume(struct usb_hcd *hcd)
{
// SOFs on
DBG("%s\n", __FUNCTION__);
@@ -1380,8 +1380,8 @@ sl811h_hub_resume(struct usb_hcd *hcd)
#else
-#define sl811h_hub_suspend NULL
-#define sl811h_hub_resume NULL
+#define sl811h_bus_suspend NULL
+#define sl811h_bus_resume NULL
#endif
@@ -1623,8 +1623,8 @@ static struct hc_driver sl811h_hc_driver = {
*/
.hub_status_data = sl811h_hub_status_data,
.hub_control = sl811h_hub_control,
- .hub_suspend = sl811h_hub_suspend,
- .hub_resume = sl811h_hub_resume,
+ .bus_suspend = sl811h_bus_suspend,
+ .bus_resume = sl811h_bus_resume,
};
/*-------------------------------------------------------------------------*/
@@ -1791,7 +1791,7 @@ sl811h_suspend(struct device *dev, pm_message_t state)
int retval = 0;
if (state.event == PM_EVENT_FREEZE)
- retval = sl811h_hub_suspend(hcd);
+ retval = sl811h_bus_suspend(hcd);
else if (state.event == PM_EVENT_SUSPEND)
port_power(sl811, 0);
if (retval == 0)
@@ -1816,7 +1816,7 @@ sl811h_resume(struct device *dev)
}
dev->power.power_state = PMSG_ON;
- return sl811h_hub_resume(hcd);
+ return sl811h_bus_resume(hcd);
}
#else
@@ -1831,6 +1831,7 @@ sl811h_resume(struct device *dev)
struct device_driver sl811h_driver = {
.name = (char *) hcd_name,
.bus = &platform_bus_type,
+ .owner = THIS_MODULE,
.probe = sl811h_probe,
.remove = __devexit_p(sl811h_remove),
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 4538a98b6f9..151154df37f 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -348,7 +348,6 @@ static int uhci_show_urbp(struct uhci_hcd *uhci, struct urb_priv *urbp, char *bu
if (urbp->urb->status != -EINPROGRESS)
out += sprintf(out, "Status=%d ", urbp->urb->status);
- //out += sprintf(out, "Inserttime=%lx ",urbp->inserttime);
//out += sprintf(out, "FSBRtime=%lx ",urbp->fsbrtime);
count = 0;
@@ -446,11 +445,11 @@ static int uhci_sprint_schedule(struct uhci_hcd *uhci, char *buf, int len)
out += sprintf(out, "Frame List\n");
for (i = 0; i < UHCI_NUMFRAMES; ++i) {
int shown = 0;
- td = uhci->fl->frame_cpu[i];
+ td = uhci->frame_cpu[i];
if (!td)
continue;
- if (td->dma_handle != (dma_addr_t)uhci->fl->frame[i]) {
+ if (td->dma_handle != (dma_addr_t)uhci->frame[i]) {
show_frame_num();
out += sprintf(out, " frame list does not match td->dma_handle!\n");
}
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 0c024898cbe..15e0a511069 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -101,37 +101,16 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
#include "uhci-q.c"
#include "uhci-hub.c"
+extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
/*
- * Make sure the controller is completely inactive, unable to
- * generate interrupts or do DMA.
+ * Finish up a host controller reset and update the recorded state.
*/
-static void reset_hc(struct uhci_hcd *uhci)
+static void finish_reset(struct uhci_hcd *uhci)
{
int port;
- /* Turn off PIRQ enable and SMI enable. (This also turns off the
- * BIOS's USB Legacy Support.) Turn off all the R/WC bits too.
- */
- pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
- USBLEGSUP_RWC);
-
- /* Reset the HC - this will force us to get a
- * new notification of any already connected
- * ports due to the virtual disconnect that it
- * implies.
- */
- outw(USBCMD_HCRESET, uhci->io_addr + USBCMD);
- mb();
- udelay(5);
- if (inw(uhci->io_addr + USBCMD) & USBCMD_HCRESET)
- dev_warn(uhci_dev(uhci), "HCRESET not completed yet!\n");
-
- /* Just to be safe, disable interrupt requests and
- * make sure the controller is stopped.
- */
- outw(0, uhci->io_addr + USBINTR);
- outw(0, uhci->io_addr + USBCMD);
-
/* HCRESET doesn't affect the Suspend, Reset, and Resume Detect
* bits in the port status and control registers.
* We have to clear them by hand.
@@ -153,7 +132,8 @@ static void reset_hc(struct uhci_hcd *uhci)
*/
static void hc_died(struct uhci_hcd *uhci)
{
- reset_hc(uhci);
+ uhci_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr);
+ finish_reset(uhci);
uhci->hc_inaccessible = 1;
}
@@ -163,44 +143,8 @@ static void hc_died(struct uhci_hcd *uhci)
*/
static void check_and_reset_hc(struct uhci_hcd *uhci)
{
- u16 legsup;
- unsigned int cmd, intr;
-
- /*
- * When restarting a suspended controller, we expect all the
- * settings to be the same as we left them:
- *
- * PIRQ and SMI disabled, no R/W bits set in USBLEGSUP;
- * Controller is stopped and configured with EGSM set;
- * No interrupts enabled except possibly Resume Detect.
- *
- * If any of these conditions are violated we do a complete reset.
- */
- pci_read_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, &legsup);
- if (legsup & ~(USBLEGSUP_RO | USBLEGSUP_RWC)) {
- dev_dbg(uhci_dev(uhci), "%s: legsup = 0x%04x\n",
- __FUNCTION__, legsup);
- goto reset_needed;
- }
-
- cmd = inw(uhci->io_addr + USBCMD);
- if ((cmd & USBCMD_RS) || !(cmd & USBCMD_CF) || !(cmd & USBCMD_EGSM)) {
- dev_dbg(uhci_dev(uhci), "%s: cmd = 0x%04x\n",
- __FUNCTION__, cmd);
- goto reset_needed;
- }
-
- intr = inw(uhci->io_addr + USBINTR);
- if (intr & (~USBINTR_RESUME)) {
- dev_dbg(uhci_dev(uhci), "%s: intr = 0x%04x\n",
- __FUNCTION__, intr);
- goto reset_needed;
- }
- return;
-
-reset_needed:
- dev_dbg(uhci_dev(uhci), "Performing full reset\n");
- reset_hc(uhci);
+ if (uhci_check_and_reset_hc(to_pci_dev(uhci_dev(uhci)), uhci->io_addr))
+ finish_reset(uhci);
}
/*
@@ -212,13 +156,13 @@ static void configure_hc(struct uhci_hcd *uhci)
outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF);
/* Store the frame list base address */
- outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
+ outl(uhci->frame_dma_handle, uhci->io_addr + USBFLBASEADD);
/* Set the current frame number */
outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
- /* Mark controller as running before we enable interrupts */
- uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
+ /* Mark controller as not halted before we enable interrupts */
+ uhci_to_hcd(uhci)->state = HC_STATE_SUSPENDED;
mb();
/* Enable PIRQ */
@@ -319,6 +263,7 @@ __acquires(uhci->lock)
static void start_rh(struct uhci_hcd *uhci)
{
+ uhci_to_hcd(uhci)->state = HC_STATE_RUNNING;
uhci->is_stopped = 0;
smp_wmb();
@@ -437,36 +382,21 @@ static void release_uhci(struct uhci_hcd *uhci)
int i;
for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
- uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
+ uhci_free_qh(uhci, uhci->skelqh[i]);
- if (uhci->term_td) {
- uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
- }
+ uhci_free_td(uhci, uhci->term_td);
- if (uhci->qh_pool) {
- dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
- }
+ dma_pool_destroy(uhci->qh_pool);
- if (uhci->td_pool) {
- dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
- }
+ dma_pool_destroy(uhci->td_pool);
- if (uhci->fl) {
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
- }
+ kfree(uhci->frame_cpu);
- if (uhci->dentry) {
- debugfs_remove(uhci->dentry);
- uhci->dentry = NULL;
- }
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
+
+ debugfs_remove(uhci->dentry);
}
static int uhci_reset(struct usb_hcd *hcd)
@@ -545,7 +475,6 @@ static int uhci_start(struct usb_hcd *hcd)
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int retval = -EBUSY;
int i;
- dma_addr_t dma_handle;
struct dentry *dentry;
hcd->uses_new_polling = 1;
@@ -579,17 +508,23 @@ static int uhci_start(struct usb_hcd *hcd)
init_waitqueue_head(&uhci->waitqh);
- uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- &dma_handle, 0);
- if (!uhci->fl) {
+ uhci->frame = dma_alloc_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ &uhci->frame_dma_handle, 0);
+ if (!uhci->frame) {
dev_err(uhci_dev(uhci), "unable to allocate "
"consistent memory for frame list\n");
- goto err_alloc_fl;
+ goto err_alloc_frame;
}
+ memset(uhci->frame, 0, UHCI_NUMFRAMES * sizeof(*uhci->frame));
- memset((void *)uhci->fl, 0, sizeof(*uhci->fl));
-
- uhci->fl->dma_handle = dma_handle;
+ uhci->frame_cpu = kcalloc(UHCI_NUMFRAMES, sizeof(*uhci->frame_cpu),
+ GFP_KERNEL);
+ if (!uhci->frame_cpu) {
+ dev_err(uhci_dev(uhci), "unable to allocate "
+ "memory for frame pointers\n");
+ goto err_alloc_frame_cpu;
+ }
uhci->td_pool = dma_pool_create("uhci_td", uhci_dev(uhci),
sizeof(struct uhci_td), 16, 0);
@@ -672,7 +607,7 @@ static int uhci_start(struct usb_hcd *hcd)
irq = 7;
/* Only place we don't use the frame list routines */
- uhci->fl->frame[i] = UHCI_PTR_QH |
+ uhci->frame[i] = UHCI_PTR_QH |
cpu_to_le32(uhci->skelqh[irq]->dma_handle);
}
@@ -690,31 +625,29 @@ static int uhci_start(struct usb_hcd *hcd)
* error exits:
*/
err_alloc_skelqh:
- for (i = 0; i < UHCI_NUM_SKELQH; i++)
- if (uhci->skelqh[i]) {
+ for (i = 0; i < UHCI_NUM_SKELQH; i++) {
+ if (uhci->skelqh[i])
uhci_free_qh(uhci, uhci->skelqh[i]);
- uhci->skelqh[i] = NULL;
- }
+ }
uhci_free_td(uhci, uhci->term_td);
- uhci->term_td = NULL;
err_alloc_term_td:
dma_pool_destroy(uhci->qh_pool);
- uhci->qh_pool = NULL;
err_create_qh_pool:
dma_pool_destroy(uhci->td_pool);
- uhci->td_pool = NULL;
err_create_td_pool:
- dma_free_coherent(uhci_dev(uhci), sizeof(*uhci->fl),
- uhci->fl, uhci->fl->dma_handle);
- uhci->fl = NULL;
+ kfree(uhci->frame_cpu);
+
+err_alloc_frame_cpu:
+ dma_free_coherent(uhci_dev(uhci),
+ UHCI_NUMFRAMES * sizeof(*uhci->frame),
+ uhci->frame, uhci->frame_dma_handle);
-err_alloc_fl:
+err_alloc_frame:
debugfs_remove(uhci->dentry);
- uhci->dentry = NULL;
err_create_debug_entry:
return retval;
@@ -726,7 +659,7 @@ static void uhci_stop(struct usb_hcd *hcd)
spin_lock_irq(&uhci->lock);
if (!uhci->hc_inaccessible)
- reset_hc(uhci);
+ hc_died(uhci);
uhci_scan_schedule(uhci, NULL);
spin_unlock_irq(&uhci->lock);
@@ -774,14 +707,8 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message)
if (uhci->hc_inaccessible) /* Dead or already suspended */
goto done;
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- suspend_rh(uhci, UHCI_RH_SUSPENDED);
-#endif
-
if (uhci->rh_state > UHCI_RH_SUSPENDED) {
dev_warn(uhci_dev(uhci), "Root hub isn't suspended!\n");
- hcd->state = HC_STATE_RUNNING;
rc = -EBUSY;
goto done;
};
@@ -820,10 +747,6 @@ static int uhci_resume(struct usb_hcd *hcd)
check_and_reset_hc(uhci);
configure_hc(uhci);
-#ifndef CONFIG_USB_SUSPEND
- /* Otherwise this would never happen */
- wakeup_rh(uhci);
-#endif
if (uhci->rh_state == UHCI_RH_RESET)
suspend_rh(uhci, UHCI_RH_SUSPENDED);
@@ -881,8 +804,8 @@ static const struct hc_driver uhci_driver = {
#ifdef CONFIG_PM
.suspend = uhci_suspend,
.resume = uhci_resume,
- .hub_suspend = uhci_rh_suspend,
- .hub_resume = uhci_rh_resume,
+ .bus_suspend = uhci_rh_suspend,
+ .bus_resume = uhci_rh_resume,
#endif
.stop = uhci_stop,
@@ -908,6 +831,7 @@ MODULE_DEVICE_TABLE(pci, uhci_pci_ids);
static struct pci_driver uhci_pci_driver = {
.name = (char *)hcd_name,
.id_table = uhci_pci_ids,
+ .owner = THIS_MODULE,
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 282f40b7588..e576db57a92 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -7,6 +7,7 @@
#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
#define PIPE_DEVEP_MASK 0x0007ff00
+
/*
* Universal Host Controller Interface data structures and defines
*/
@@ -82,15 +83,10 @@
#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */
-struct uhci_frame_list {
- __le32 frame[UHCI_NUMFRAMES];
-
- void *frame_cpu[UHCI_NUMFRAMES];
-
- dma_addr_t dma_handle;
-};
-struct urb_priv;
+/*
+ * Queue Headers
+ */
/*
* One role of a QH is to hold a queue of TDs for some endpoint. Each QH is
@@ -116,13 +112,13 @@ struct uhci_qh {
struct urb_priv *urbp;
- struct list_head list; /* P: uhci->frame_list_lock */
- struct list_head remove_list; /* P: uhci->remove_list_lock */
+ struct list_head list;
+ struct list_head remove_list;
} __attribute__((aligned(16)));
/*
* We need a special accessor for the element pointer because it is
- * subject to asynchronous updates by the controller
+ * subject to asynchronous updates by the controller.
*/
static __le32 inline qh_element(struct uhci_qh *qh) {
__le32 element = qh->element;
@@ -131,6 +127,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
return element;
}
+
+/*
+ * Transfer Descriptors
+ */
+
/*
* for TD <status>:
*/
@@ -183,17 +184,10 @@ static __le32 inline qh_element(struct uhci_qh *qh) {
*
* That's silly, the hardware doesn't care. The hardware only cares that
* the hardware words are 16-byte aligned, and we can have any amount of
- * sw space after the TD entry as far as I can tell.
- *
- * But let's just go with the documentation, at least for 32-bit machines.
- * On 64-bit machines we probably want to take advantage of the fact that
- * hw doesn't really care about the size of the sw-only area.
- *
- * Alas, not anymore, we have more than 4 words for software, woops.
- * Everything still works tho, surprise! -jerdfelt
+ * sw space after the TD entry.
*
* td->link points to either another TD (not necessarily for the same urb or
- * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs)
+ * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs).
*/
struct uhci_td {
/* Hardware fields */
@@ -205,18 +199,16 @@ struct uhci_td {
/* Software fields */
dma_addr_t dma_handle;
- struct urb *urb;
-
- struct list_head list; /* P: urb->lock */
- struct list_head remove_list; /* P: uhci->td_remove_list_lock */
+ struct list_head list;
+ struct list_head remove_list;
int frame; /* for iso: what frame? */
- struct list_head fl_list; /* P: uhci->frame_list_lock */
+ struct list_head fl_list;
} __attribute__((aligned(16)));
/*
* We need a special accessor for the control/status word because it is
- * subject to asynchronous updates by the controller
+ * subject to asynchronous updates by the controller.
*/
static u32 inline td_status(struct uhci_td *td) {
__le32 status = td->status;
@@ -227,6 +219,10 @@ static u32 inline td_status(struct uhci_td *td) {
/*
+ * Skeleton Queue Headers
+ */
+
+/*
* The UHCI driver places Interrupt, Control and Bulk into QH's both
* to group together TD's for one transfer, and also to faciliate queuing
* of URB's. To make it easy to insert entries into the schedule, we have
@@ -256,15 +252,15 @@ static u32 inline td_status(struct uhci_td *td) {
*
* The terminating QH is used for 2 reasons:
* - To place a terminating TD which is used to workaround a PIIX bug
- * (see Intel errata for explanation)
+ * (see Intel errata for explanation), and
* - To loop back to the full-speed control queue for full-speed bandwidth
- * reclamation
+ * reclamation.
*
* Isochronous transfers are stored before the start of the skeleton
* schedule and don't use QH's. While the UHCI spec doesn't forbid the
- * use of QH's for Isochronous, it doesn't use them either. Since we don't
- * need to use them either, we follow the spec diagrams in hope that it'll
- * be more compatible with future UHCI implementations.
+ * use of QH's for Isochronous, it doesn't use them either. And the spec
+ * says that queues never advance on an error completion status, which
+ * makes them totally unsuitable for Isochronous transfers.
*/
#define UHCI_NUM_SKELQH 12
@@ -314,8 +310,13 @@ static inline int __interval_to_skel(int interval)
return 0; /* int128 for 128-255 ms (Max.) */
}
+
+/*
+ * The UHCI controller and root hub
+ */
+
/*
- * States for the root hub.
+ * States for the root hub:
*
* To prevent "bouncing" in the presence of electrical noise,
* when there are no devices attached we delay for 1 second in the
@@ -326,7 +327,7 @@ static inline int __interval_to_skel(int interval)
*/
enum uhci_rh_state {
/* In the following states the HC must be halted.
- * These two must come first */
+ * These two must come first. */
UHCI_RH_RESET,
UHCI_RH_SUSPENDED,
@@ -338,13 +339,13 @@ enum uhci_rh_state {
UHCI_RH_SUSPENDING,
/* In the following states it's an error if the HC is halted.
- * These two must come last */
+ * These two must come last. */
UHCI_RH_RUNNING, /* The normal state */
UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */
};
/*
- * This describes the full uhci information.
+ * The full UHCI controller information:
*/
struct uhci_hcd {
@@ -361,7 +362,11 @@ struct uhci_hcd {
struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */
spinlock_t lock;
- struct uhci_frame_list *fl; /* P: uhci->lock */
+
+ dma_addr_t frame_dma_handle; /* Hardware frame list */
+ __le32 *frame;
+ void **frame_cpu; /* CPU's frame list */
+
int fsbr; /* Full-speed bandwidth reclamation */
unsigned long fsbrtimeout; /* FSBR delay */
@@ -385,22 +390,22 @@ struct uhci_hcd {
unsigned long ports_timeout; /* Time to stop signalling */
/* Main list of URB's currently controlled by this HC */
- struct list_head urb_list; /* P: uhci->lock */
+ struct list_head urb_list;
/* List of QH's that are done, but waiting to be unlinked (race) */
- struct list_head qh_remove_list; /* P: uhci->lock */
+ struct list_head qh_remove_list;
unsigned int qh_remove_age; /* Age in frames */
/* List of TD's that are done, but waiting to be freed (race) */
- struct list_head td_remove_list; /* P: uhci->lock */
+ struct list_head td_remove_list;
unsigned int td_remove_age; /* Age in frames */
/* List of asynchronously unlinked URB's */
- struct list_head urb_remove_list; /* P: uhci->lock */
+ struct list_head urb_remove_list;
unsigned int urb_remove_age; /* Age in frames */
/* List of URB's awaiting completion callback */
- struct list_head complete_list; /* P: uhci->lock */
+ struct list_head complete_list;
int rh_numports; /* Number of root-hub ports */
@@ -419,13 +424,17 @@ static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci)
#define uhci_dev(u) (uhci_to_hcd(u)->self.controller)
+
+/*
+ * Private per-URB data
+ */
struct urb_priv {
struct list_head urb_list;
struct urb *urb;
struct uhci_qh *qh; /* QH for this URB */
- struct list_head td_list; /* P: urb->lock */
+ struct list_head td_list;
unsigned fsbr : 1; /* URB turned on FSBR */
unsigned fsbr_timeout : 1; /* URB timed out on FSBR */
@@ -434,12 +443,12 @@ struct urb_priv {
/* a control transfer, retrigger */
/* the status phase */
- unsigned long inserttime; /* In jiffies */
unsigned long fsbrtime; /* In jiffies */
- struct list_head queue_list; /* P: uhci->frame_list_lock */
+ struct list_head queue_list;
};
+
/*
* Locking in uhci.c
*
@@ -459,6 +468,5 @@ struct urb_priv {
#define PCI_VENDOR_ID_GENESYS 0x17a0
#define PCI_DEVICE_ID_GL880S_UHCI 0x8083
-#define PCI_DEVICE_ID_GL880S_EHCI 0x8084
#endif
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 4e0fbe2c1a9..7e46887d9e1 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -89,10 +89,10 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td,
td->frame = framenum;
/* Is there a TD already mapped there? */
- if (uhci->fl->frame_cpu[framenum]) {
+ if (uhci->frame_cpu[framenum]) {
struct uhci_td *ftd, *ltd;
- ftd = uhci->fl->frame_cpu[framenum];
+ ftd = uhci->frame_cpu[framenum];
ltd = list_entry(ftd->fl_list.prev, struct uhci_td, fl_list);
list_add_tail(&td->fl_list, &ftd->fl_list);
@@ -101,29 +101,32 @@ static void uhci_insert_td_frame_list(struct uhci_hcd *uhci, struct uhci_td *td,
wmb();
ltd->link = cpu_to_le32(td->dma_handle);
} else {
- td->link = uhci->fl->frame[framenum];
+ td->link = uhci->frame[framenum];
wmb();
- uhci->fl->frame[framenum] = cpu_to_le32(td->dma_handle);
- uhci->fl->frame_cpu[framenum] = td;
+ uhci->frame[framenum] = cpu_to_le32(td->dma_handle);
+ uhci->frame_cpu[framenum] = td;
}
}
-static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td)
+static inline void uhci_remove_td_frame_list(struct uhci_hcd *uhci,
+ struct uhci_td *td)
{
/* If it's not inserted, don't remove it */
- if (td->frame == -1 && list_empty(&td->fl_list))
+ if (td->frame == -1) {
+ WARN_ON(!list_empty(&td->fl_list));
return;
+ }
- if (td->frame != -1 && uhci->fl->frame_cpu[td->frame] == td) {
+ if (uhci->frame_cpu[td->frame] == td) {
if (list_empty(&td->fl_list)) {
- uhci->fl->frame[td->frame] = td->link;
- uhci->fl->frame_cpu[td->frame] = NULL;
+ uhci->frame[td->frame] = td->link;
+ uhci->frame_cpu[td->frame] = NULL;
} else {
struct uhci_td *ntd;
ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
- uhci->fl->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
- uhci->fl->frame_cpu[td->frame] = ntd;
+ uhci->frame[td->frame] = cpu_to_le32(ntd->dma_handle);
+ uhci->frame_cpu[td->frame] = ntd;
}
} else {
struct uhci_td *ptd;
@@ -132,13 +135,20 @@ static void uhci_remove_td(struct uhci_hcd *uhci, struct uhci_td *td)
ptd->link = td->link;
}
- wmb();
- td->link = UHCI_PTR_TERM;
-
list_del_init(&td->fl_list);
td->frame = -1;
}
+static void unlink_isochronous_tds(struct uhci_hcd *uhci, struct urb *urb)
+{
+ struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
+ struct uhci_td *td;
+
+ list_for_each_entry(td, &urbp->td_list, list)
+ uhci_remove_td_frame_list(uhci, td);
+ wmb();
+}
+
/*
* Inserts a td list into qh.
*/
@@ -443,7 +453,6 @@ static struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci, struct urb *u
memset((void *)urbp, 0, sizeof(*urbp));
- urbp->inserttime = jiffies;
urbp->fsbrtime = jiffies;
urbp->urb = urb;
@@ -462,8 +471,6 @@ static void uhci_add_td_to_urb(struct urb *urb, struct uhci_td *td)
{
struct urb_priv *urbp = (struct urb_priv *)urb->hcpriv;
- td->urb = urb;
-
list_add_tail(&td->list, &urbp->td_list);
}
@@ -473,8 +480,6 @@ static void uhci_remove_td_from_urb(struct uhci_td *td)
return;
list_del_init(&td->list);
-
- td->urb = NULL;
}
static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
@@ -503,7 +508,6 @@ static void uhci_destroy_urb_priv(struct uhci_hcd *uhci, struct urb *urb)
list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
uhci_remove_td_from_urb(td);
- uhci_remove_td(uhci, td);
list_add(&td->remove_list, &uhci->td_remove_list);
}
@@ -1073,6 +1077,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
struct uhci_td *td;
int i, ret, frame;
int status, destination;
+ struct urb_priv *urbp = (struct urb_priv *) urb->hcpriv;
status = TD_CTRL_ACTIVE | TD_CTRL_IOS;
destination = (urb->pipe & PIPE_DEVEP_MASK) | usb_packetid(urb->pipe);
@@ -1081,11 +1086,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
if (ret)
return ret;
- frame = urb->start_frame;
- for (i = 0; i < urb->number_of_packets; i++, frame += urb->interval) {
- if (!urb->iso_frame_desc[i].length)
- continue;
-
+ for (i = 0; i < urb->number_of_packets; i++) {
td = uhci_alloc_td(uhci);
if (!td)
return -ENOMEM;
@@ -1096,8 +1097,12 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb)
if (i + 1 >= urb->number_of_packets)
td->status |= cpu_to_le32(TD_CTRL_IOC);
+ }
+ frame = urb->start_frame;
+ list_for_each_entry(td, &urbp->td_list, list) {
uhci_insert_td_frame_list(uhci, td, frame);
+ frame += urb->interval;
}
return -EINPROGRESS;
@@ -1110,7 +1115,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
int status;
int i, ret = 0;
- urb->actual_length = 0;
+ urb->actual_length = urb->error_count = 0;
i = 0;
list_for_each_entry(td, &urbp->td_list, list) {
@@ -1134,6 +1139,7 @@ static int uhci_result_isochronous(struct uhci_hcd *uhci, struct urb *urb)
i++;
}
+ unlink_isochronous_tds(uhci, urb);
return ret;
}
@@ -1366,6 +1372,8 @@ static int uhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
goto done;
list_del_init(&urbp->urb_list);
+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+ unlink_isochronous_tds(uhci, urb);
uhci_unlink_generic(uhci, urb);
uhci_get_current_frame_number(uhci);
diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index a330a4b50e1..1d973bcf56a 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -425,9 +425,8 @@ static void mdc800_usb_download_notify (struct urb *urb, struct pt_regs *res)
static struct usb_driver mdc800_usb_driver;
static struct file_operations mdc800_device_ops;
static struct usb_class_driver mdc800_class = {
- .name = "usb/mdc800%d",
+ .name = "mdc800%d",
.fops = &mdc800_device_ops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = MDC800_DEVICE_MINOR_BASE,
};
@@ -976,13 +975,13 @@ static struct usb_driver mdc800_usb_driver =
Init and Cleanup this driver (Main Functions)
*************************************************************************/
-#define try(A) if (!(A)) goto cleanup_on_fail;
-
static int __init usb_mdc800_init (void)
{
int retval = -ENODEV;
/* Allocate Memory */
- try (mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL));
+ mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL);
+ if (!mdc800)
+ goto cleanup_on_fail;
memset(mdc800, 0, sizeof(struct mdc800_data));
mdc800->dev = NULL;
@@ -998,13 +997,25 @@ static int __init usb_mdc800_init (void)
mdc800->downloaded = 0;
mdc800->written = 0;
- try (mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL));
- try (mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL));
- try (mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL));
+ mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL);
+ if (!mdc800->irq_urb_buffer)
+ goto cleanup_on_fail;
+ mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL);
+ if (!mdc800->write_urb_buffer)
+ goto cleanup_on_fail;
+ mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL);
+ if (!mdc800->download_urb_buffer)
+ goto cleanup_on_fail;
- try (mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL));
- try (mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL));
- try (mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL));
+ mdc800->irq_urb=usb_alloc_urb (0, GFP_KERNEL);
+ if (!mdc800->irq_urb)
+ goto cleanup_on_fail;
+ mdc800->download_urb=usb_alloc_urb (0, GFP_KERNEL);
+ if (!mdc800->download_urb)
+ goto cleanup_on_fail;
+ mdc800->write_urb=usb_alloc_urb (0, GFP_KERNEL);
+ if (!mdc800->write_urb)
+ goto cleanup_on_fail;
/* Register the driver */
retval = usb_register(&mdc800_usb_driver);
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index c84e1486054..c89d0769b3d 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -773,11 +773,10 @@ static int mts_usb_probe(struct usb_interface *intf,
}
- new_desc = kmalloc(sizeof(struct mts_desc), GFP_KERNEL);
+ new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL);
if (!new_desc)
goto out;
- memset(new_desc, 0, sizeof(*new_desc));
new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!new_desc->urb)
goto out_kfree;
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index 1c5205321d8..1c3b472a3bc 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -2154,7 +2154,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
* input_handles associated with this input device.
* What identifies an evdev input_handler is that it begins
* with 'event', continues with a digit, and that in turn
- * is mapped to /{devfs}/input/eventN.
+ * is mapped to input/eventN.
*/
list_for_each_safe(node, next, &inputdev->h_list) {
inputhandle = to_handle(node);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 411a0645a7a..79ddce4555a 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1784,6 +1784,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
+ /* May be needed for some devices */
+ usb_clear_halt(hid->dev, hid->urbin->pipe);
+
return hid;
fail:
@@ -1887,7 +1890,6 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message)
struct hid_device *hid = usb_get_intfdata (intf);
usb_kill_urb(hid->urbin);
- intf->dev.power.power_state = PMSG_SUSPEND;
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
@@ -1897,7 +1899,6 @@ static int hid_resume(struct usb_interface *intf)
struct hid_device *hid = usb_get_intfdata (intf);
int status;
- intf->dev.power.power_state = PMSG_ON;
if (hid->open)
status = usb_submit_urb(hid->urbin, GFP_NOIO);
else
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index d32427818af..440377c7a0d 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -732,9 +732,8 @@ static struct file_operations hiddev_fops = {
};
static struct usb_class_driver hiddev_class = {
- .name = "usb/hid/hiddev%d",
+ .name = "hiddev%d",
.fops = &hiddev_fops,
- .mode = S_IFCHR | S_IRUGO | S_IWUSR,
.minor_base = HIDDEV_MINOR_BASE,
};
diff --git a/drivers/usb/input/map_to_7segment.h b/drivers/usb/input/map_to_7segment.h
index 52ff27f1512..a424094d9fe 100644
--- a/drivers/usb/input/map_to_7segment.h
+++ b/drivers/usb/input/map_to_7segment.h
@@ -79,7 +79,7 @@ struct seg7_conversion_map {
static inline int map_to_seg7(struct seg7_conversion_map *map, int c)
{
- return c & 0x7f ? map->table[c] : -EINVAL;
+ return c >= 0 && c < sizeof(map->table) ? map->table[c] : -EINVAL;
}
#define SEG7_CONVERSION_MAP(_name, _map) \
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 3766ccc271b..0043e6ebcd1 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -75,7 +75,9 @@ struct touchkit_usb {
static struct usb_device_id touchkit_devices[] = {
{USB_DEVICE(0x3823, 0x0001)},
+ {USB_DEVICE(0x0123, 0x0001)},
{USB_DEVICE(0x0eef, 0x0001)},
+ {USB_DEVICE(0x0eef, 0x0002)},
{}
};
diff --git a/drivers/usb/media/dabusb.c b/drivers/usb/media/dabusb.c
index 6ca2fae99d2..27b23c55bbc 100644
--- a/drivers/usb/media/dabusb.c
+++ b/drivers/usb/media/dabusb.c
@@ -707,9 +707,8 @@ static struct file_operations dabusb_fops =
};
static struct usb_class_driver dabusb_class = {
- .name = "usb/dabusb%d",
+ .name = "dabusb%d",
.fops = &dabusb_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = DABUSB_MINOR,
};
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index ae4681f9f0e..5f33f7c6488 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -1873,9 +1873,8 @@ static struct file_operations auerswald_fops =
};
static struct usb_class_driver auerswald_class = {
- .name = "usb/auer%d",
+ .name = "auer%d",
.fops = &auerswald_fops,
- .mode = S_IFCHR | S_IRUGO | S_IWUGO,
.minor_base = AUER_MINOR_BASE,
};
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 733acc21372..3944a55ed74 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -105,11 +105,10 @@ static struct file_operations idmouse_fops = {
.release = idmouse_release,
};
-/* class driver information for devfs */
+/* class driver information */
static struct usb_class_driver idmouse_class = {
- .name = "usb/idmouse%d",
+ .name = "idmouse%d",
.fops = &idmouse_fops,
- .mode = S_IFCHR | S_IRUSR | S_IRGRP | S_IROTH, /* filemode (char, 444) */
.minor_base = USB_IDMOUSE_MINOR_BASE,
};
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 7d06105763d..2703e205bc8 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -271,12 +271,11 @@ static struct file_operations tower_fops = {
/*
* usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
*/
static struct usb_class_driver tower_class = {
- .name = "usb/legousbtower%d",
+ .name = "legousbtower%d",
.fops = &tower_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
.minor_base = LEGO_USB_TOWER_MINOR_BASE,
};
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 26f77e29c7a..7d02d8ec6b1 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -443,9 +443,8 @@ file_operations usb_rio_fops = {
};
static struct usb_class_driver usb_rio_class = {
- .name = "usb/rio500%d",
+ .name = "rio500%d",
.fops = &usb_rio_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
.minor_base = RIO_MINOR,
};
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 39db3155723..c946c9a538a 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -2440,7 +2440,7 @@ int
sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init)
{
int ret = 0, slot = sisusb->font_slot, i;
- struct font_desc *myfont;
+ const struct font_desc *myfont;
u8 *tempbuf;
u16 *tempbufb;
size_t written;
@@ -3239,12 +3239,7 @@ static struct file_operations usb_sisusb_fops = {
};
static struct usb_class_driver usb_sisusb_class = {
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13)
- .name = "usb/sisusbvga%d",
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP,
-#else
.name = "sisusbvga%d",
-#endif
.fops = &usb_sisusb_fops,
.minor_base = SISUSB_MINOR
};
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 096ab302967..85f3725334b 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -251,13 +251,12 @@ static struct file_operations lcd_fops = {
};
/*
- * * usb class driver info in order to get a minor number from the usb core,
- * * and to have the device registered with devfs and the driver core
- * */
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with the driver core
+ */
static struct usb_class_driver lcd_class = {
- .name = "usb/lcd%d",
+ .name = "lcd%d",
.fops = &lcd_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
.minor_base = USBLCD_MINOR,
};
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 54799eb0bc6..90a96257d6c 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -983,6 +983,7 @@ test_ctrl_queue (struct usbtest_dev *dev, struct usbtest_param *param)
reqp->number = i % NUM_SUBCASES;
reqp->expected = expected;
u->setup_packet = (char *) &reqp->setup;
+ u->transfer_flags |= URB_NO_SETUP_DMA_MAP;
u->context = &context;
u->complete = ctrl_complete;
@@ -1948,21 +1949,11 @@ usbtest_probe (struct usb_interface *intf, const struct usb_device_id *id)
static int usbtest_suspend (struct usb_interface *intf, pm_message_t message)
{
- struct usbtest_dev *dev = usb_get_intfdata (intf);
-
- down (&dev->sem);
- intf->dev.power.power_state = PMSG_SUSPEND;
- up (&dev->sem);
return 0;
}
static int usbtest_resume (struct usb_interface *intf)
{
- struct usbtest_dev *dev = usb_get_intfdata (intf);
-
- down (&dev->sem);
- intf->dev.power.power_state = PMSG_ON;
- up (&dev->sem);
return 0;
}
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index 508a21028db..c34944c7504 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -11,6 +11,7 @@
#include <linux/usb.h>
#include <linux/debugfs.h>
#include <linux/smp_lock.h>
+#include <linux/notifier.h>
#include "usb_mon.h"
#include "../core/hcd.h"
@@ -205,6 +206,23 @@ static void mon_bus_remove(struct usb_bus *ubus)
up(&mon_lock);
}
+static int mon_notify(struct notifier_block *self, unsigned long action,
+ void *dev)
+{
+ switch (action) {
+ case USB_BUS_ADD:
+ mon_bus_add(dev);
+ break;
+ case USB_BUS_REMOVE:
+ mon_bus_remove(dev);
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block mon_nb = {
+ .notifier_call = mon_notify,
+};
+
/*
* Ops
*/
@@ -212,8 +230,6 @@ static struct usb_mon_operations mon_ops_0 = {
.urb_submit = mon_submit,
.urb_submit_error = mon_submit_error,
.urb_complete = mon_complete,
- .bus_add = mon_bus_add,
- .bus_remove = mon_bus_remove,
};
/*
@@ -329,6 +345,8 @@ static int __init mon_init(void)
}
// MOD_INC_USE_COUNT(which_module?);
+ usb_register_notify(&mon_nb);
+
down(&usb_bus_list_lock);
list_for_each_entry (ubus, &usb_bus_list, bus_list) {
mon_bus_init(mondir, ubus);
@@ -342,6 +360,7 @@ static void __exit mon_exit(void)
struct mon_bus *mbus;
struct list_head *p;
+ usb_unregister_notify(&mon_nb);
usb_mon_deregister();
down(&mon_lock);
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 8c010bb44eb..efd6ca7e4ac 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -294,7 +294,7 @@ config USB_NET_ZAURUS
This also supports some related device firmware, as used in some
PDAs from Olympus and some cell phones from Motorola.
- If you install an alternate ROM image, such as the Linux 2.6 based
+ If you install an alternate image, such as the Linux 2.6 based
versions of OpenZaurus, you should no longer need to support this
protocol. Only the "eth-fd" or "net_fd" drivers in these devices
really need this non-conformant variant of CDC Ethernet (or in
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index c82655d3d44..6bef1be6b36 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -469,7 +469,7 @@ static int kaweth_reset(struct kaweth_device *kaweth)
0,
KAWETH_CONTROL_TIMEOUT);
- udelay(10000);
+ mdelay(10);
kaweth_dbg("kaweth_reset() returns %d.",result);
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 6a4ffe6c397..537eb181d98 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -1384,7 +1384,6 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->intr_urb);
}
- intf->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
@@ -1392,7 +1391,6 @@ static int pegasus_resume (struct usb_interface *intf)
{
struct pegasus *pegasus = usb_get_intfdata(intf);
- intf->dev.power.power_state = PMSG_ON;
netif_device_attach (pegasus->net);
if (netif_running(pegasus->net)) {
pegasus->rx_urb->status = 0;
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
index b98f2a83344..9fbd59b55cb 100644
--- a/drivers/usb/net/pegasus.h
+++ b/drivers/usb/net/pegasus.h
@@ -181,6 +181,8 @@ PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
VENDOR_ADMTEK, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index c3d4e3589e3..787dd3591d6 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -909,6 +909,7 @@ static void rtl8150_disconnect(struct usb_interface *intf)
usb_set_intfdata(intf, NULL);
if (dev) {
set_bit(RTL8150_UNPLUG, &dev->flags);
+ tasklet_disable(&dev->tl);
unregister_netdev(dev->netdev);
unlink_all_urbs(dev);
free_all_urbs(dev);
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index fce81d73893..74f05c9c84d 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -1185,7 +1185,6 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
netif_device_detach (dev->net);
(void) unlink_urbs (dev, &dev->rxq);
(void) unlink_urbs (dev, &dev->txq);
- intf->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
EXPORT_SYMBOL_GPL(usbnet_suspend);
@@ -1194,7 +1193,6 @@ int usbnet_resume (struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
- intf->dev.power.power_state = PMSG_ON;
netif_device_attach (dev->net);
tasklet_schedule (&dev->bh);
return 0;
diff --git a/drivers/usb/serial/ChangeLog.old b/drivers/usb/serial/ChangeLog.old
new file mode 100644
index 00000000000..c1b279939bb
--- /dev/null
+++ b/drivers/usb/serial/ChangeLog.old
@@ -0,0 +1,730 @@
+This is the contents of some of the drivers/usb/serial/ files that had old
+changelog comments. They were quite old, and out of date, and we don't keep
+them anymore, so I've put them here, away from the source files, in case
+people still care to see them.
+
+- Greg Kroah-Hartman <greg@kroah.com> October 20, 2005
+
+-----------------------------------------------------------------------
+usb-serial.h Change Log comments:
+
+ (03/26/2002) gkh
+ removed the port->tty check from port_paranoia_check() due to serial
+ consoles not having a tty device assigned to them.
+
+ (12/03/2001) gkh
+ removed active from the port structure.
+ added documentation to the usb_serial_device_type structure
+
+ (10/10/2001) gkh
+ added vendor and product to serial structure. Needed to determine device
+ owner when the device is disconnected.
+
+ (05/30/2001) gkh
+ added sem to port structure and removed port_lock
+
+ (10/05/2000) gkh
+ Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
+ fix bug with urb->dev not being set properly, now that the usb core
+ needs it.
+
+ (09/11/2000) gkh
+ Added usb_serial_debug_data function to help get rid of #DEBUG in the
+ drivers.
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+
+ (08/08/2000) gkh
+ Added open_count to port structure.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+-----------------------------------------------------------------------
+usb-serial.c Change Log comments:
+
+ (12/10/2002) gkh
+ Split the ports off into their own struct device, and added a
+ usb-serial bus driver.
+
+ (11/19/2002) gkh
+ removed a few #ifdefs for the generic code and cleaned up the failure
+ logic in initialization.
+
+ (10/02/2002) gkh
+ moved the console code to console.c and out of this file.
+
+ (06/05/2002) gkh
+ moved location of startup() call in serial_probe() until after all
+ of the port information and endpoints are initialized. This makes
+ things easier for some drivers.
+
+ (04/10/2002) gkh
+ added serial_read_proc function which creates a
+ /proc/tty/driver/usb-serial file.
+
+ (03/27/2002) gkh
+ Got USB serial console code working properly and merged into the main
+ version of the tree. Thanks to Randy Dunlap for the initial version
+ of this code, and for pushing me to finish it up.
+ The USB serial console works with any usb serial driver device.
+
+ (03/21/2002) gkh
+ Moved all manipulation of port->open_count into the core. Now the
+ individual driver's open and close functions are called only when the
+ first open() and last close() is called. Making the drivers a bit
+ smaller and simpler.
+ Fixed a bug if a driver didn't have the owner field set.
+
+ (02/26/2002) gkh
+ Moved all locking into the main serial_* functions, instead of having
+ the individual drivers have to grab the port semaphore. This should
+ reduce races.
+ Reworked the MOD_INC logic a bit to always increment and decrement, even
+ if the generic driver is being used.
+
+ (10/10/2001) gkh
+ usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
+ help prevent child drivers from accessing the device since it is now
+ gone.
+
+ (09/13/2001) gkh
+ Moved generic driver initialize after we have registered with the USB
+ core. Thanks to Randy Dunlap for pointing this problem out.
+
+ (07/03/2001) gkh
+ Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
+ Fixed vendor and product getting defined through the MODULE_PARM macro
+ if the Generic driver wasn't compiled in.
+ Fixed problem with generic_shutdown() not being called for drivers that
+ don't have a shutdown() function.
+
+ (06/06/2001) gkh
+ added evil hack that is needed for the prolific pl2303 device due to the
+ crazy way its endpoints are set up.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ 2001_02_05 gkh
+ Fixed buffer overflows bug with the generic serial driver. Thanks to
+ Todd Squires <squirest@ct0.com> for fixing this.
+
+ (01/10/2001) gkh
+ Fixed bug where the generic serial adaptor grabbed _any_ device that was
+ offered to it.
+
+ (12/12/2000) gkh
+ Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
+ moved them to the serial_open and serial_close functions.
+ Also fixed bug with there not being a MOD_DEC for the generic driver
+ (thanks to Gary Brubaker for finding this.)
+
+ (11/29/2000) gkh
+ Small NULL pointer initialization cleanup which saves a bit of disk image
+
+ (11/01/2000) Adam J. Richter
+ instead of using idVendor/idProduct pairs, usb serial drivers
+ now identify their hardware interest with usb_device_id tables,
+ which they usually have anyhow for use with MODULE_DEVICE_TABLE.
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (08/28/2000) gkh
+ Added port_lock to port structure.
+ Added locks for SMP safeness to generic driver
+ Fixed the ability to open a generic device's port more than once.
+
+ (07/23/2000) gkh
+ Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+ Modifications to allow usb-serial drivers to be modules.
+
+ (07/03/2000) gkh
+ Added more debugging to serial_ioctl call
+
+ (06/25/2000) gkh
+ Changed generic_write_bulk_callback to not call wake_up_interruptible
+ directly, but to have port_softint do it at a safer time.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (05/22/2000) gkh
+ Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
+ removed from the individual device source files.
+
+ (05/03/2000) gkh
+ Added the Digi Acceleport driver from Al Borchers and Peter Berger.
+
+ (05/02/2000) gkh
+ Changed devfs and tty register code to work properly now. This was based on
+ the ACM driver changes by Vojtech Pavlik.
+
+ (04/27/2000) Ryan VanderBijl
+ Put calls to *_paranoia_checks into one function.
+
+ (04/23/2000) gkh
+ Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
+ Moved when the startup code printed out the devices that are supported.
+
+ (04/19/2000) gkh
+ Added driver for ZyXEL omni.net lcd plus ISDN TA
+ Made startup info message specify which drivers were compiled in.
+
+ (04/03/2000) gkh
+ Changed the probe process to remove the module unload races.
+ Changed where the tty layer gets initialized to have devfs work nicer.
+ Added initial devfs support.
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+ (03/19/2000) gkh
+ Fixed oops that could happen when device was removed while a program
+ was talking to the device.
+ Removed the static urbs and now all urbs are created and destroyed
+ dynamically.
+ Reworked the internal interface. Now everything is based on the
+ usb_serial_port structure instead of the larger usb_serial structure.
+ This fixes the bug that a multiport device could not have more than
+ one port open at one time.
+
+ (03/17/2000) gkh
+ Added config option for debugging messages.
+ Added patch for keyspan pda from Brian Warner.
+
+ (03/06/2000) gkh
+ Added the keyspan pda code from Brian Warner <warner@lothar.com>
+ Moved a bunch of the port specific stuff into its own structure. This
+ is in anticipation of the true multiport devices (there's a bug if you
+ try to access more than one port of any multiport device right now)
+
+ (02/21/2000) gkh
+ Made it so that any serial devices only have to specify which functions
+ they want to overload from the generic function calls (great,
+ inheritance in C, in a driver, just what I wanted...)
+ Added support for set_termios and ioctl function calls. No drivers take
+ advantage of this yet.
+ Removed the #ifdef MODULE, now there is no module specific code.
+ Cleaned up a few comments in usb-serial.h that were wrong (thanks again
+ to Miles Lott).
+ Small fix to get_free_serial.
+
+ (02/14/2000) gkh
+ Removed the Belkin and Peracom functionality from the driver due to
+ the lack of support from the vendor, and me not wanting people to
+ accidenatly buy the device, expecting it to work with Linux.
+ Added read_bulk_callback and write_bulk_callback to the type structure
+ for the needs of the FTDI and WhiteHEAT driver.
+ Changed all reverences to FTDI to FTDI_SIO at the request of Bill
+ Ryder.
+ Changed the output urb size back to the max endpoint size to make
+ the ftdi_sio driver have it easier, and due to the fact that it didn't
+ really increase the speed any.
+
+ (02/11/2000) gkh
+ Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
+ patch from Miles Lott (milos@insync.net).
+ Fixed bug with not restoring the minor range that a device grabs, if
+ the startup function fails (thanks Miles for finding this).
+
+ (02/05/2000) gkh
+ Added initial framework for the Keyspan PDA serial converter so that
+ Brian Warner has a place to put his code.
+ Made the ezusb specific functions generic enough that different
+ devices can use them (whiteheat and keyspan_pda both need them).
+ Split out a whole bunch of structure and other stuff to a separate
+ usb-serial.h file.
+ Made the Visor connection messages a little more understandable, now
+ that Miles Lott (milos@insync.net) has gotten the Generic channel to
+ work. Also made them always show up in the log file.
+
+ (01/25/2000) gkh
+ Added initial framework for FTDI serial converter so that Bill Ryder
+ has a place to put his code.
+ Added the vendor specific info from Handspring. Now we can print out
+ informational debug messages as well as understand what is happening.
+
+ (01/23/2000) gkh
+ Fixed problem of crash when trying to open a port that didn't have a
+ device assigned to it. Made the minor node finding a little smarter,
+ now it looks to find a continuous space for the new device.
+
+ (01/21/2000) gkh
+ Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
+ Fixed get_serial_by_minor which was all messed up for multi port
+ devices. Fixed multi port problem for generic devices. Now the number
+ of ports is determined by the number of bulk out endpoints for the
+ generic device.
+
+ (01/19/2000) gkh
+ Removed lots of cruft that was around from the old (pre urb) driver
+ interface.
+ Made the serial_table dynamic. This should save lots of memory when
+ the number of minor nodes goes up to 256.
+ Added initial support for devices that have more than one port.
+ Added more debugging comments for the Visor, and added a needed
+ set_configuration call.
+
+ (01/17/2000) gkh
+ Fixed the WhiteHEAT firmware (my processing tool had a bug)
+ and added new debug loader firmware for it.
+ Removed the put_char function as it isn't really needed.
+ Added visor startup commands as found by the Win98 dump.
+
+ (01/13/2000) gkh
+ Fixed the vendor id for the generic driver to the one I meant it to be.
+
+ (01/12/2000) gkh
+ Forget the version numbering...that's pretty useless...
+ Made the driver able to be compiled so that the user can select which
+ converter they want to use. This allows people who only want the Visor
+ support to not pay the memory size price of the WhiteHEAT.
+ Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
+ grabbed the root hub. Not good.
+
+ version 0.4.0 (01/10/2000) gkh
+ Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
+ device. Added startup function to allow firmware to be downloaded to
+ a device if it needs to be.
+ Added firmware download logic to the WhiteHEAT device.
+ Started to add #defines to split up the different drivers for potential
+ configuration option.
+
+ version 0.3.1 (12/30/99) gkh
+ Fixed problems with urb for bulk out.
+ Added initial support for multiple sets of endpoints. This enables
+ the Handspring Visor to be attached successfully. Only the first
+ bulk in / bulk out endpoint pair is being used right now.
+
+ version 0.3.0 (12/27/99) gkh
+ Added initial support for the Handspring Visor based on a patch from
+ Miles Lott (milos@sneety.insync.net)
+ Cleaned up the code a bunch and converted over to using urbs only.
+
+ version 0.2.3 (12/21/99) gkh
+ Added initial support for the Connect Tech WhiteHEAT converter.
+ Incremented the number of ports in expectation of getting the
+ WhiteHEAT to work properly (4 ports per connection).
+ Added notification on insertion and removal of what port the
+ device is/was connected to (and what kind of device it was).
+
+ version 0.2.2 (12/16/99) gkh
+ Changed major number to the new allocated number. We're legal now!
+
+ version 0.2.1 (12/14/99) gkh
+ Fixed bug that happens when device node is opened when there isn't a
+ device attached to it. Thanks to marek@webdesign.no for noticing this.
+
+ version 0.2.0 (11/10/99) gkh
+ Split up internals to make it easier to add different types of serial
+ converters to the code.
+ Added a "generic" driver that gets it's vendor and product id
+ from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
+ for the idea and sample code (from the usb scanner driver.)
+ Cleared up any licensing questions by releasing it under the GNU GPL.
+
+ version 0.1.2 (10/25/99) gkh
+ Fixed bug in detecting device.
+
+ version 0.1.1 (10/05/99) gkh
+ Changed the major number to not conflict with anything else.
+
+ version 0.1 (09/28/99) gkh
+ Can recognize the two different devices and start up a read from
+ device when asked to. Writes also work. No control signals yet, this
+ all is vendor specific data (i.e. no spec), also no control for
+ different baud rates or other bit settings.
+ Currently we are using the same devid as the acm driver. This needs
+ to change.
+
+-----------------------------------------------------------------------
+visor.c Change Log comments:
+
+ (06/03/2003) Judd Montgomery <judd at jpilot.org>
+ Added support for module parameter options for untested/unknown
+ devices.
+
+ (03/09/2003) gkh
+ Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
+ <brachtl@redgrep.cz> for the information.
+
+ (03/05/2003) gkh
+ Think Treo support is now working.
+
+ (04/03/2002) gkh
+ Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
+ <hiro@zob.ne.jp> for the information.
+
+ (03/27/2002) gkh
+ Removed assumptions that port->tty was always valid (is not true
+ for usb serial console devices.)
+
+ (03/23/2002) gkh
+ Added support for the Palm i705 device, thanks to Thomas Riemer
+ <tom@netmech.com> for the information.
+
+ (03/21/2002) gkh
+ Added support for the Palm m130 device, thanks to Udo Eisenbarth
+ <udo.eisenbarth@web.de> for the information.
+
+ (02/27/2002) gkh
+ Reworked the urb handling logic. We have no more pool, but dynamically
+ allocate the urb and the transfer buffer on the fly. In testing this
+ does not incure any measurable overhead. This also relies on the fact
+ that we have proper reference counting logic for urbs.
+
+ (02/21/2002) SilaS
+ Added initial support for the Palm m515 devices.
+
+ (02/14/2002) gkh
+ Added support for the Clie S-360 device.
+
+ (12/18/2001) gkh
+ Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
+ for the patch.
+
+ (11/11/2001) gkh
+ Added support for the m125 devices, and added check to prevent oopses
+ for Clié devices that lie about the number of ports they have.
+
+ (08/30/2001) gkh
+ Added support for the Clie devices, both the 3.5 and 4.0 os versions.
+ Many thanks to Daniel Burke, and Bryan Payne for helping with this.
+
+ (08/23/2001) gkh
+ fixed a few potential bugs pointed out by Oliver Neukum.
+
+ (05/30/2001) gkh
+ switched from using spinlock to a semaphore, which fixes lots of problems.
+
+ (05/28/2000) gkh
+ Added initial support for the Palm m500 and Palm m505 devices.
+
+ (04/08/2001) gb
+ Identify version on module load.
+
+ (01/21/2000) gkh
+ Added write_room and chars_in_buffer, as they were previously using the
+ generic driver versions which is all wrong now that we are using an urb
+ pool. Thanks to Wolfgang Grandegger for pointing this out to me.
+ Removed count assignment in the write function, which was not needed anymore
+ either. Thanks to Al Borchers for pointing this out.
+
+ (12/12/2000) gkh
+ Moved MOD_DEC to end of visor_close to be nicer, as the final write
+ message can sleep.
+
+ (11/12/2000) gkh
+ Fixed bug with data being dropped on the floor by forcing tty->low_latency
+ to be on. Hopefully this fixes the OHCI issue!
+
+ (11/01/2000) Adam J. Richter
+ usb_device_id table support
+
+ (10/05/2000) gkh
+ Fixed bug with urb->dev not being set properly, now that the usb
+ core needs it.
+
+ (09/11/2000) gkh
+ Got rid of always calling kmalloc for every urb we wrote out to the
+ device.
+ Added visor_read_callback so we can keep track of bytes in and out for
+ those people who like to know the speed of their device.
+ Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (09/06/2000) gkh
+ Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
+ the host controller drivers set urb->dev = NULL when the urb is finished.
+
+ (08/28/2000) gkh
+ Added locks for SMP safeness.
+
+ (08/08/2000) gkh
+ Fixed endian problem in visor_startup.
+ Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
+ than once.
+
+ (07/23/2000) gkh
+ Added pool of write urbs to speed up transfers to the visor.
+
+ (07/19/2000) gkh
+ Added module_init and module_exit functions to handle the fact that this
+ driver is a loadable module now.
+
+ (07/03/2000) gkh
+ Added visor_set_ioctl and visor_set_termios functions (they don't do much
+ of anything, but are good for debugging.)
+
+ (06/25/2000) gkh
+ Fixed bug in visor_unthrottle that should help with the disconnect in PPP
+ bug that people have been reporting.
+
+ (06/23/2000) gkh
+ Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (04/27/2000) Ryan VanderBijl
+ Fixed memory leak in visor_close
+
+ (03/26/2000) gkh
+ Split driver up into device specific pieces.
+
+-----------------------------------------------------------------------
+pl2303.c Change Log comments:
+
+ 2002_Mar_26 gkh
+ allowed driver to work properly if there is no tty assigned to a port
+ (this happens for serial console devices.)
+
+ 2001_Oct_06 gkh
+ Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
+
+ 2001_Sep_19 gkh
+ Added break support.
+
+ 2001_Aug_30 gkh
+ fixed oops in write_bulk_callback.
+
+ 2001_Aug_28 gkh
+ reworked buffer logic to be like other usb-serial drivers. Hopefully
+ removing some reported problems.
+
+ 2001_Jun_06 gkh
+ finished porting to 2.4 format.
+
+
+-----------------------------------------------------------------------
+io_edgeport.c Change Log comments:
+
+ 2003_04_03 al borchers
+ - fixed a bug (that shows up with dosemu) where the tty struct is
+ used in a callback after it has been freed
+
+ 2.3 2002_03_08 greg kroah-hartman
+ - fixed bug when multiple devices were attached at the same time.
+
+ 2.2 2001_11_14 greg kroah-hartman
+ - fixed bug in edge_close that kept the port from being used more
+ than once.
+ - fixed memory leak on device removal.
+ - fixed potential double free of memory when command urb submitting
+ failed.
+ - other small cleanups when the device is removed
+
+ 2.1 2001_07_09 greg kroah-hartman
+ - added support for TIOCMBIS and TIOCMBIC.
+
+ (04/08/2001) gb
+ - Identify version on module load.
+
+ 2.0 2001_03_05 greg kroah-hartman
+ - reworked entire driver to fit properly in with the other usb-serial
+ drivers. Occasional oopses still happen, but it's a good start.
+
+ 1.2.3 (02/23/2001) greg kroah-hartman
+ - changed device table to work properly for 2.4.x final format.
+ - fixed problem with dropping data at high data rates.
+
+ 1.2.2 (11/27/2000) greg kroah-hartman
+ - cleaned up more NTisms.
+ - Added device table for 2.4.0-test11
+
+ 1.2.1 (11/08/2000) greg kroah-hartman
+ - Started to clean up NTisms.
+ - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
+
+ 1.2 (10/17/2000) David Iacovelli
+ Remove all EPIC code and GPL source
+ Fix RELEVANT_IFLAG macro to include flow control
+ changes port configuration changes.
+ Fix redefinition of SERIAL_MAGIC
+ Change all timeout values to 5 seconds
+ Tried to fix the UHCI multiple urb submission, but failed miserably.
+ it seems to work fine with OHCI.
+ ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
+ find a way to work arount this UHCI bug )
+
+ 1.1 (10/11/2000) David Iacovelli
+ Fix XON/XOFF flow control to support both IXON and IXOFF
+
+ 0.9.27 (06/30/2000) David Iacovelli
+ Added transmit queue and now allocate urb for command writes.
+
+ 0.9.26 (06/29/2000) David Iacovelli
+ Add support for 80251 based edgeport
+
+ 0.9.25 (06/27/2000) David Iacovelli
+ Do not close the port if it has multiple opens.
+
+ 0.9.24 (05/26/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+ and first cut at running BlackBox Demo
+
+ 0.9.23 (05/24/2000) David Iacovelli
+ Add IOCTLs to support RXTX and JAVA POS
+
+ 0.9.22 (05/23/2000) David Iacovelli
+ fixed bug in enumeration. If epconfig turns on mapping by
+ path after a device is already plugged in, we now update
+ the mapping correctly
+
+ 0.9.21 (05/16/2000) David Iacovelli
+ Added BlockUntilChaseResp() to also wait for txcredits
+ Updated the way we allocate and handle write URBs
+ Add debug code to dump buffers
+
+ 0.9.20 (05/01/2000) David Iacovelli
+ change driver to use usb/tts/
+
+ 0.9.19 (05/01/2000) David Iacovelli
+ Update code to compile if DEBUG is off
+
+ 0.9.18 (04/28/2000) David Iacovelli
+ cleanup and test tty_register with devfs
+
+ 0.9.17 (04/27/2000) greg kroah-hartman
+ changed tty_register around to be like the way it
+ was before, but now it works properly with devfs.
+
+ 0.9.16 (04/26/2000) david iacovelli
+ Fixed bug in GetProductInfo()
+
+ 0.9.15 (04/25/2000) david iacovelli
+ Updated enumeration
+
+ 0.9.14 (04/24/2000) david iacovelli
+ Removed all config/status IOCTLS and
+ converted to using /proc/edgeport
+ still playing with devfs
+
+ 0.9.13 (04/24/2000) david iacovelli
+ Removed configuration based on ttyUSB0
+ Added support for configuration using /prod/edgeport
+ first attempt at using devfs (not working yet!)
+ Added IOCTL to GetProductInfo()
+ Added support for custom baud rates
+ Add support for random port numbers
+
+ 0.9.12 (04/18/2000) david iacovelli
+ added additional configuration IOCTLs
+ use ttyUSB0 for configuration
+
+ 0.9.11 (04/17/2000) greg kroah-hartman
+ fixed module initialization race conditions.
+ made all urbs dynamically allocated.
+ made driver devfs compatible. now it only registers the tty device
+ when the device is actually plugged in.
+
+ 0.9.10 (04/13/2000) greg kroah-hartman
+ added proc interface framework.
+
+ 0.9.9 (04/13/2000) david iacovelli
+ added enumeration code and ioctls to configure the device
+
+ 0.9.8 (04/12/2000) david iacovelli
+ Change interrupt read start when device is plugged in
+ and stop when device is removed
+ process interrupt reads when all ports are closed
+ (keep value of rxBytesAvail consistent with the edgeport)
+ set the USB_BULK_QUEUE flag so that we can shove a bunch
+ of urbs at once down the pipe
+
+ 0.9.7 (04/10/2000) david iacovelli
+ start to add enumeration code.
+ generate serial number for epic devices
+ add support for kdb
+
+ 0.9.6 (03/30/2000) david iacovelli
+ add IOCTL to get string, manufacture, and boot descriptors
+
+ 0.9.5 (03/14/2000) greg kroah-hartman
+ more error checking added to SerialOpen to try to fix UHCI open problem
+
+ 0.9.4 (03/09/2000) greg kroah-hartman
+ added more error checking to handle oops when data is hanging
+ around and tty is abruptly closed.
+
+ 0.9.3 (03/09/2000) david iacovelli
+ Add epic support for xon/xoff chars
+ play with performance
+
+ 0.9.2 (03/08/2000) greg kroah-hartman
+ changed most "info" calls to "dbg"
+ implemented flow control properly in the termios call
+
+ 0.9.1 (03/08/2000) david iacovelli
+ added EPIC support
+ enabled bootloader update
+
+ 0.9 (03/08/2000) greg kroah-hartman
+ Release to IO networks.
+ Integrated changes that David made
+ made getting urbs for writing SMP safe
+
+ 0.8 (03/07/2000) greg kroah-hartman
+ Release to IO networks.
+ Fixed problems that were seen in code by David.
+ Now both Edgeport/4 and Edgeport/2 works properly.
+ Changed most of the functions to use port instead of serial.
+
+ 0.7 (02/27/2000) greg kroah-hartman
+ Milestone 3 release.
+ Release to IO Networks
+ ioctl for waiting on line change implemented.
+ ioctl for getting statistics implemented.
+ multiport support working.
+ lsr and msr registers are now handled properly.
+ change break now hooked up and working.
+ support for all known Edgeport devices.
+
+ 0.6 (02/22/2000) greg kroah-hartman
+ Release to IO networks.
+ CHASE is implemented correctly when port is closed.
+ SerialOpen now blocks correctly until port is fully opened.
+
+ 0.5 (02/20/2000) greg kroah-hartman
+ Release to IO networks.
+ Known problems:
+ modem status register changes are not sent on to the user
+ CHASE is not implemented when the port is closed.
+
+ 0.4 (02/16/2000) greg kroah-hartman
+ Second cut at the CeBit demo.
+ Doesn't leak memory on every write to the port
+ Still small leaks on startup.
+ Added support for Edgeport/2 and Edgeport/8
+
+ 0.3 (02/15/2000) greg kroah-hartman
+ CeBit demo release.
+ Force the line settings to 4800, 8, 1, e for the demo.
+ Warning! This version leaks memory like crazy!
+
+ 0.2 (01/30/2000) greg kroah-hartman
+ Milestone 1 release.
+ Device is found by USB subsystem, enumerated, fimware is downloaded
+ and the descriptors are printed to the debug log, config is set, and
+ green light starts to blink. Open port works, and data can be sent
+ and received at the default settings of the UART. Loopback connector
+ and debug log confirms this.
+
+ 0.1 (01/23/2000) greg kroah-hartman
+ Initial release to help IO Networks try to set up their test system.
+ Edgeport4 is recognized, firmware is downloaded, config is set so
+ device blinks green light every 3 sec. Port is bound, but opening,
+ closing, and sending data do not work properly.
+
+
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 9438909e87a..7b5e8e4ee2b 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -394,6 +394,15 @@ config USB_SERIAL_MCT_U232
To compile this driver as a module, choose M here: the
module will be called mct_u232.
+config USB_SERIAL_NOKIA_DKU2
+ tristate "USB Nokia DKU2 Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Nokia DKU2 device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called nokia_dku2.
+
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 6c7cdcc99a9..55fd461793b 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o
obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
+obj-$(CONFIG_USB_SERIAL_NOKIA_DKU2) += nokia_dku2.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 926d4c2c160..1f29d883732 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -30,9 +30,11 @@ static struct usb_driver airprime_driver = {
.id_table = id_table,
};
-static struct usb_serial_device_type airprime_device = {
- .owner = THIS_MODULE,
- .name = "airprime",
+static struct usb_serial_driver airprime_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "airprime",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index abb1b2c543b..84bc0ee4f06 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -121,10 +121,12 @@ static struct usb_driver belkin_driver = {
};
/* All of the device info needed for the serial converters */
-static struct usb_serial_device_type belkin_device = {
- .owner = THIS_MODULE,
- .name = "Belkin / Peracom / GoHubs USB Serial Adapter",
- .short_name = "belkin",
+static struct usb_serial_driver belkin_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "belkin",
+ },
+ .description = "Belkin / Peracom / GoHubs USB Serial Adapter",
.id_table = id_table_combined,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 2f612c2d894..664139afcfa 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -18,7 +18,7 @@
static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
{
- struct usb_serial_device_type *driver;
+ struct usb_serial_driver *driver;
const struct usb_serial_port *port;
/*
@@ -44,7 +44,7 @@ struct bus_type usb_serial_bus_type = {
static int usb_serial_device_probe (struct device *dev)
{
- struct usb_serial_device_type *driver;
+ struct usb_serial_driver *driver;
struct usb_serial_port *port;
int retval = 0;
int minor;
@@ -57,13 +57,13 @@ static int usb_serial_device_probe (struct device *dev)
driver = port->serial->type;
if (driver->port_probe) {
- if (!try_module_get(driver->owner)) {
+ if (!try_module_get(driver->driver.owner)) {
dev_err(dev, "module get failed, exiting\n");
retval = -EIO;
goto exit;
}
retval = driver->port_probe (port);
- module_put(driver->owner);
+ module_put(driver->driver.owner);
if (retval)
goto exit;
}
@@ -72,7 +72,7 @@ static int usb_serial_device_probe (struct device *dev)
tty_register_device (usb_serial_tty_driver, minor, dev);
dev_info(&port->serial->dev->dev,
"%s converter now attached to ttyUSB%d\n",
- driver->name, minor);
+ driver->description, minor);
exit:
return retval;
@@ -80,7 +80,7 @@ exit:
static int usb_serial_device_remove (struct device *dev)
{
- struct usb_serial_device_type *driver;
+ struct usb_serial_driver *driver;
struct usb_serial_port *port;
int retval = 0;
int minor;
@@ -92,43 +92,38 @@ static int usb_serial_device_remove (struct device *dev)
driver = port->serial->type;
if (driver->port_remove) {
- if (!try_module_get(driver->owner)) {
+ if (!try_module_get(driver->driver.owner)) {
dev_err(dev, "module get failed, exiting\n");
retval = -EIO;
goto exit;
}
retval = driver->port_remove (port);
- module_put(driver->owner);
+ module_put(driver->driver.owner);
}
exit:
minor = port->number;
tty_unregister_device (usb_serial_tty_driver, minor);
dev_info(dev, "%s converter now disconnected from ttyUSB%d\n",
- driver->name, minor);
+ driver->description, minor);
return retval;
}
-int usb_serial_bus_register(struct usb_serial_device_type *device)
+int usb_serial_bus_register(struct usb_serial_driver *driver)
{
int retval;
- if (device->short_name)
- device->driver.name = (char *)device->short_name;
- else
- device->driver.name = (char *)device->name;
- device->driver.bus = &usb_serial_bus_type;
- device->driver.probe = usb_serial_device_probe;
- device->driver.remove = usb_serial_device_remove;
- device->driver.owner = device->owner;
+ driver->driver.bus = &usb_serial_bus_type;
+ driver->driver.probe = usb_serial_device_probe;
+ driver->driver.remove = usb_serial_device_remove;
- retval = driver_register(&device->driver);
+ retval = driver_register(&driver->driver);
return retval;
}
-void usb_serial_bus_deregister(struct usb_serial_device_type *device)
+void usb_serial_bus_deregister(struct usb_serial_driver *driver)
{
- driver_unregister (&device->driver);
+ driver_unregister(&driver->driver);
}
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 97c78c21e8d..c5334dd89b1 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -67,15 +67,17 @@ MODULE_DEVICE_TABLE (usb, id_table);
static struct usb_driver cp2101_driver = {
.owner = THIS_MODULE,
- .name = "CP2101",
+ .name = "cp2101",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
};
-static struct usb_serial_device_type cp2101_device = {
- .owner = THIS_MODULE,
- .name = "CP2101",
+static struct usb_serial_driver cp2101_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cp2101",
+ },
.id_table = id_table,
.num_interrupt_in = 0,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b5b431067b0..e581e4ae848 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -83,10 +83,12 @@ static struct usb_driver cyberjack_driver = {
.id_table = id_table,
};
-static struct usb_serial_device_type cyberjack_device = {
- .owner = THIS_MODULE,
- .name = "Reiner SCT Cyberjack USB card reader",
- .short_name = "cyberjack",
+static struct usb_serial_driver cyberjack_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cyberjack",
+ },
+ .description = "Reiner SCT Cyberjack USB card reader",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9ee1aaff2fc..af9290ed257 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -176,10 +176,12 @@ static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf, u
static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
-static struct usb_serial_device_type cypress_earthmate_device = {
- .owner = THIS_MODULE,
- .name = "DeLorme Earthmate USB",
- .short_name = "earthmate",
+static struct usb_serial_driver cypress_earthmate_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "earthmate",
+ },
+ .description = "DeLorme Earthmate USB",
.id_table = id_table_earthmate,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
@@ -203,10 +205,12 @@ static struct usb_serial_device_type cypress_earthmate_device = {
.write_int_callback = cypress_write_int_callback,
};
-static struct usb_serial_device_type cypress_hidcom_device = {
- .owner = THIS_MODULE,
- .name = "HID->COM RS232 Adapter",
- .short_name = "cyphidcom",
+static struct usb_serial_driver cypress_hidcom_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cyphidcom",
+ },
+ .description = "HID->COM RS232 Adapter",
.id_table = id_table_cyphidcomrs232,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index a19a47f6cf1..dc74644a603 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -503,10 +503,12 @@ static struct usb_driver digi_driver = {
/* device info needed for the Digi serial converter */
-static struct usb_serial_device_type digi_acceleport_2_device = {
- .owner = THIS_MODULE,
- .name = "Digi 2 port USB adapter",
- .short_name = "digi_2",
+static struct usb_serial_driver digi_acceleport_2_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "digi_2",
+ },
+ .description = "Digi 2 port USB adapter",
.id_table = id_table_2,
.num_interrupt_in = 0,
.num_bulk_in = 4,
@@ -530,10 +532,12 @@ static struct usb_serial_device_type digi_acceleport_2_device = {
.shutdown = digi_shutdown,
};
-static struct usb_serial_device_type digi_acceleport_4_device = {
- .owner = THIS_MODULE,
- .name = "Digi 4 port USB adapter",
- .short_name = "digi_4",
+static struct usb_serial_driver digi_acceleport_4_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "digi_4",
+ },
+ .description = "Digi 4 port USB adapter",
.id_table = id_table_4,
.num_interrupt_in = 0,
.num_bulk_in = 5,
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 8d562ab454a..0b0546dcc7b 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -112,9 +112,11 @@ static struct usb_driver empeg_driver = {
.id_table = id_table,
};
-static struct usb_serial_device_type empeg_device = {
- .owner = THIS_MODULE,
- .name = "Empeg",
+static struct usb_serial_driver empeg_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "empeg",
+ },
.id_table = id_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5a8631c8a4a..61204bf7cd7 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -411,6 +411,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
/*
* These will probably use user-space drivers. Uncomment them if
* you need them or use the user-specified vendor/product module
@@ -428,7 +430,6 @@ static struct usb_device_id id_table_combined [] = {
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, */
- /* { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, */
/* { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, */
@@ -471,6 +472,9 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -558,10 +562,12 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud);
static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
static __u32 ftdi_232bm_baud_to_divisor (int baud);
-static struct usb_serial_device_type ftdi_sio_device = {
- .owner = THIS_MODULE,
- .name = "FTDI USB Serial Device",
- .short_name = "ftdi_sio",
+static struct usb_serial_driver ftdi_sio_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ftdi_sio",
+ },
+ .description = "FTDI USB Serial Device",
.id_table = id_table_combined,
.num_interrupt_in = 0,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 2c35d74cc6d..ddb63df31ce 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -199,6 +199,19 @@
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
/*
+ * Definitions for Artemis astronomical USB based cameras
+ * Check it at http://www.artemisccd.co.uk/
+ */
+#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
+
+/*
+ * Definitions for ATIK Instruments astronomical USB based cameras
+ * Check it at http://www.atik-instruments.com/
+ */
+#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Camera */
+#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Camera */
+
+/*
* Protego product ids
*/
#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
@@ -329,6 +342,9 @@
#define EVOLUTION_VID 0xDEEE /* Vendor ID */
#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
+/* Pyramid Computer GmbH */
+#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 2ef614d5c8f..35820bda7ae 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1468,16 +1468,13 @@ static void garmin_shutdown (struct usb_serial *serial)
}
-
-
-
-
-
/* All of the device info needed */
-static struct usb_serial_device_type garmin_device = {
- .owner = THIS_MODULE,
- .name = "Garmin GPS usb/tty",
- .short_name = "garmin_gps",
+static struct usb_serial_driver garmin_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "garmin_gps",
+ },
+ .description = "Garmin GPS usb/tty",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 5f7d3193d35..8909208f506 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -36,10 +36,11 @@ MODULE_PARM_DESC(product, "User specified USB idProduct");
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
/* All of the device info needed for the Generic Serial Converter */
-struct usb_serial_device_type usb_serial_generic_device = {
- .owner = THIS_MODULE,
- .name = "Generic",
- .short_name = "generic",
+struct usb_serial_driver usb_serial_generic_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "generic",
+ },
.id_table = generic_device_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 64d55fbd206..8eadfb70560 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -38,15 +38,17 @@ MODULE_DEVICE_TABLE(usb, id_table);
static struct usb_driver hp49gp_driver = {
.owner = THIS_MODULE,
- .name = "HP4X",
+ .name = "hp4X",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
};
-static struct usb_serial_device_type hp49gp_device = {
- .owner = THIS_MODULE,
- .name = "HP4X",
+static struct usb_serial_driver hp49gp_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "hp4X",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 04bfe279d76..dc4c498bd1e 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -27,225 +27,6 @@
* Networks technical support, or Peter Berger <pberger@brimson.com>,
* or Al Borchers <alborchers@steinerpoint.com>.
*
- * Version history:
- *
- * 2003_04_03 al borchers
- * - fixed a bug (that shows up with dosemu) where the tty struct is
- * used in a callback after it has been freed
- *
- * 2.3 2002_03_08 greg kroah-hartman
- * - fixed bug when multiple devices were attached at the same time.
- *
- * 2.2 2001_11_14 greg kroah-hartman
- * - fixed bug in edge_close that kept the port from being used more
- * than once.
- * - fixed memory leak on device removal.
- * - fixed potential double free of memory when command urb submitting
- * failed.
- * - other small cleanups when the device is removed
- *
- * 2.1 2001_07_09 greg kroah-hartman
- * - added support for TIOCMBIS and TIOCMBIC.
- *
- * (04/08/2001) gb
- * - Identify version on module load.
- *
- * 2.0 2001_03_05 greg kroah-hartman
- * - reworked entire driver to fit properly in with the other usb-serial
- * drivers. Occasional oopses still happen, but it's a good start.
- *
- * 1.2.3 (02/23/2001) greg kroah-hartman
- * - changed device table to work properly for 2.4.x final format.
- * - fixed problem with dropping data at high data rates.
- *
- * 1.2.2 (11/27/2000) greg kroah-hartman
- * - cleaned up more NTisms.
- * - Added device table for 2.4.0-test11
- *
- * 1.2.1 (11/08/2000) greg kroah-hartman
- * - Started to clean up NTisms.
- * - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
- *
- * 1.2 (10/17/2000) David Iacovelli
- * Remove all EPIC code and GPL source
- * Fix RELEVANT_IFLAG macro to include flow control
- * changes port configuration changes.
- * Fix redefinition of SERIAL_MAGIC
- * Change all timeout values to 5 seconds
- * Tried to fix the UHCI multiple urb submission, but failed miserably.
- * it seems to work fine with OHCI.
- * ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
- * find a way to work arount this UHCI bug )
- *
- * 1.1 (10/11/2000) David Iacovelli
- * Fix XON/XOFF flow control to support both IXON and IXOFF
- *
- * 0.9.27 (06/30/2000) David Iacovelli
- * Added transmit queue and now allocate urb for command writes.
- *
- * 0.9.26 (06/29/2000) David Iacovelli
- * Add support for 80251 based edgeport
- *
- * 0.9.25 (06/27/2000) David Iacovelli
- * Do not close the port if it has multiple opens.
- *
- * 0.9.24 (05/26/2000) David Iacovelli
- * Add IOCTLs to support RXTX and JAVA POS
- * and first cut at running BlackBox Demo
- *
- * 0.9.23 (05/24/2000) David Iacovelli
- * Add IOCTLs to support RXTX and JAVA POS
- *
- * 0.9.22 (05/23/2000) David Iacovelli
- * fixed bug in enumeration. If epconfig turns on mapping by
- * path after a device is already plugged in, we now update
- * the mapping correctly
- *
- * 0.9.21 (05/16/2000) David Iacovelli
- * Added BlockUntilChaseResp() to also wait for txcredits
- * Updated the way we allocate and handle write URBs
- * Add debug code to dump buffers
- *
- * 0.9.20 (05/01/2000) David Iacovelli
- * change driver to use usb/tts/
- *
- * 0.9.19 (05/01/2000) David Iacovelli
- * Update code to compile if DEBUG is off
- *
- * 0.9.18 (04/28/2000) David Iacovelli
- * cleanup and test tty_register with devfs
- *
- * 0.9.17 (04/27/2000) greg kroah-hartman
- * changed tty_register around to be like the way it
- * was before, but now it works properly with devfs.
- *
- * 0.9.16 (04/26/2000) david iacovelli
- * Fixed bug in GetProductInfo()
- *
- * 0.9.15 (04/25/2000) david iacovelli
- * Updated enumeration
- *
- * 0.9.14 (04/24/2000) david iacovelli
- * Removed all config/status IOCTLS and
- * converted to using /proc/edgeport
- * still playing with devfs
- *
- * 0.9.13 (04/24/2000) david iacovelli
- * Removed configuration based on ttyUSB0
- * Added support for configuration using /prod/edgeport
- * first attempt at using devfs (not working yet!)
- * Added IOCTL to GetProductInfo()
- * Added support for custom baud rates
- * Add support for random port numbers
- *
- * 0.9.12 (04/18/2000) david iacovelli
- * added additional configuration IOCTLs
- * use ttyUSB0 for configuration
- *
- * 0.9.11 (04/17/2000) greg kroah-hartman
- * fixed module initialization race conditions.
- * made all urbs dynamically allocated.
- * made driver devfs compatible. now it only registers the tty device
- * when the device is actually plugged in.
- *
- * 0.9.10 (04/13/2000) greg kroah-hartman
- * added proc interface framework.
- *
- * 0.9.9 (04/13/2000) david iacovelli
- * added enumeration code and ioctls to configure the device
- *
- * 0.9.8 (04/12/2000) david iacovelli
- * Change interrupt read start when device is plugged in
- * and stop when device is removed
- * process interrupt reads when all ports are closed
- * (keep value of rxBytesAvail consistent with the edgeport)
- * set the USB_BULK_QUEUE flag so that we can shove a bunch
- * of urbs at once down the pipe
- *
- * 0.9.7 (04/10/2000) david iacovelli
- * start to add enumeration code.
- * generate serial number for epic devices
- * add support for kdb
- *
- * 0.9.6 (03/30/2000) david iacovelli
- * add IOCTL to get string, manufacture, and boot descriptors
- *
- * 0.9.5 (03/14/2000) greg kroah-hartman
- * more error checking added to SerialOpen to try to fix UHCI open problem
- *
- * 0.9.4 (03/09/2000) greg kroah-hartman
- * added more error checking to handle oops when data is hanging
- * around and tty is abruptly closed.
- *
- * 0.9.3 (03/09/2000) david iacovelli
- * Add epic support for xon/xoff chars
- * play with performance
- *
- * 0.9.2 (03/08/2000) greg kroah-hartman
- * changed most "info" calls to "dbg"
- * implemented flow control properly in the termios call
- *
- * 0.9.1 (03/08/2000) david iacovelli
- * added EPIC support
- * enabled bootloader update
- *
- * 0.9 (03/08/2000) greg kroah-hartman
- * Release to IO networks.
- * Integrated changes that David made
- * made getting urbs for writing SMP safe
- *
- * 0.8 (03/07/2000) greg kroah-hartman
- * Release to IO networks.
- * Fixed problems that were seen in code by David.
- * Now both Edgeport/4 and Edgeport/2 works properly.
- * Changed most of the functions to use port instead of serial.
- *
- * 0.7 (02/27/2000) greg kroah-hartman
- * Milestone 3 release.
- * Release to IO Networks
- * ioctl for waiting on line change implemented.
- * ioctl for getting statistics implemented.
- * multiport support working.
- * lsr and msr registers are now handled properly.
- * change break now hooked up and working.
- * support for all known Edgeport devices.
- *
- * 0.6 (02/22/2000) greg kroah-hartman
- * Release to IO networks.
- * CHASE is implemented correctly when port is closed.
- * SerialOpen now blocks correctly until port is fully opened.
- *
- * 0.5 (02/20/2000) greg kroah-hartman
- * Release to IO networks.
- * Known problems:
- * modem status register changes are not sent on to the user
- * CHASE is not implemented when the port is closed.
- *
- * 0.4 (02/16/2000) greg kroah-hartman
- * Second cut at the CeBit demo.
- * Doesn't leak memory on every write to the port
- * Still small leaks on startup.
- * Added support for Edgeport/2 and Edgeport/8
- *
- * 0.3 (02/15/2000) greg kroah-hartman
- * CeBit demo release.
- * Force the line settings to 4800, 8, 1, e for the demo.
- * Warning! This version leaks memory like crazy!
- *
- * 0.2 (01/30/2000) greg kroah-hartman
- * Milestone 1 release.
- * Device is found by USB subsystem, enumerated, fimware is downloaded
- * and the descriptors are printed to the debug log, config is set, and
- * green light starts to blink. Open port works, and data can be sent
- * and received at the default settings of the UART. Loopback connector
- * and debug log confirms this.
- *
- * 0.1 (01/23/2000) greg kroah-hartman
- * Initial release to help IO Networks try to set up their test system.
- * Edgeport4 is recognized, firmware is downloaded, config is set so
- * device blinks green light every 3 sec. Port is bound, but opening,
- * closing, and sending data do not work properly.
- *
*/
#include <linux/config.h>
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index e7ffe02408b..fad561c04c7 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -75,10 +75,12 @@ static struct usb_device_id id_table_combined [] = {
MODULE_DEVICE_TABLE (usb, id_table_combined);
-static struct usb_serial_device_type edgeport_2port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport 2 port adapter",
- .short_name = "edgeport_2",
+static struct usb_serial_driver edgeport_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_2",
+ },
+ .description = "Edgeport 2 port adapter",
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -103,10 +105,12 @@ static struct usb_serial_device_type edgeport_2port_device = {
.write_bulk_callback = edge_bulk_out_data_callback,
};
-static struct usb_serial_device_type edgeport_4port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport 4 port adapter",
- .short_name = "edgeport_4",
+static struct usb_serial_driver edgeport_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_4",
+ },
+ .description = "Edgeport 4 port adapter",
.id_table = edgeport_4port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -131,10 +135,12 @@ static struct usb_serial_device_type edgeport_4port_device = {
.write_bulk_callback = edge_bulk_out_data_callback,
};
-static struct usb_serial_device_type edgeport_8port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport 8 port adapter",
- .short_name = "edgeport_8",
+static struct usb_serial_driver edgeport_8port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_8",
+ },
+ .description = "Edgeport 8 port adapter",
.id_table = edgeport_8port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index ebf9967f7c8..832b6d6734c 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2982,10 +2982,12 @@ static unsigned int edge_buf_get(struct edge_buf *eb, char *buf,
}
-static struct usb_serial_device_type edgeport_1port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport TI 1 port adapter",
- .short_name = "edgeport_ti_1",
+static struct usb_serial_driver edgeport_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_ti_1",
+ },
+ .description = "Edgeport TI 1 port adapter",
.id_table = edgeport_1port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -3010,10 +3012,12 @@ static struct usb_serial_device_type edgeport_1port_device = {
.write_bulk_callback = edge_bulk_out_callback,
};
-static struct usb_serial_device_type edgeport_2port_device = {
- .owner = THIS_MODULE,
- .name = "Edgeport TI 2 port adapter",
- .short_name = "edgeport_ti_2",
+static struct usb_serial_driver edgeport_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "edgeport_ti_2",
+ },
+ .description = "Edgeport TI 2 port adapter",
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index c05c2a2a0f3..d5d06648810 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -92,24 +92,7 @@ static void ipaq_destroy_lists(struct usb_serial_port *port);
static struct usb_device_id ipaq_id_table [] = {
/* The first entry is a placeholder for the insmod-specified device */
{ USB_DEVICE(0x049F, 0x0003) },
- { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */
- { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */
- { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */
- { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */
- { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */
- { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */
- { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */
- { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */
- { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */
- { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */
- { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
{ USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */
{ USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */
{ USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */
@@ -125,7 +108,13 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */
{ USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */
{ USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */
- { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */
+ { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */
+ { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */
+ { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */
+ { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */
{ USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */
{ USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */
{ USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */
@@ -251,17 +240,81 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */
{ USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */
{ USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */
- { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */
- { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
- { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */
+ { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */
+ { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */
+ { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */
+ { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
+ { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
+ { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
+ { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
+ { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
+ { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */
+ { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */
+ { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */
+ { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */
+ { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */
+ { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */
+ { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */
+ { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */
+ { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */
+ { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */
+ { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */
+ { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */
+ { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */
+ { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */
+ { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */
+ { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */
+ { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */
+ { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */
+ { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */
+ { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */
+ { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */
+ { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */
+ { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */
+ { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */
+ { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */
+ { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */
+ { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */
+ { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */
+ { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */
+ { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */
+ { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */
+ { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */
{ USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */
{ USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */
+ { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */
{ USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */
{ USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */
- { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */
{ USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */
{ USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */
{ USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */
+ { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */
+ { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */
+ { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */
+ { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */
+ { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */
+ { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */
+ { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */
+ { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
{ USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */
@@ -422,116 +475,67 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */
- { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */
- { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */
- { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */
{ USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */
- { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */
- { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */
- { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */
- { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */
- { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */
- { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */
- { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */
- { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
+ { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */
{ USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */
- { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
- { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
- { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
+ { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */
+ { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */
+ { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */
+ { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */
+ { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */
+ { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */
+ { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */
+ { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */
{ USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */
{ USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */
{ USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */
{ USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */
- { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */
- { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */
- { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
- { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
- { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */
- { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */
- { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */
- { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */
- { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */
- { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */
- { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
- { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */
- { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */
- { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */
- { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */
- { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */
- { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */
+ { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */
+ { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */
+ { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */
+ { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */
+ { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */
+ { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */
+ { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */
+ { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */
+ { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */
+ { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */
+ { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */
+ { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */
+ { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */
+ { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */
+ { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */
{ USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */
{ USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */
- { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */
- { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */
{ USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */
- { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */
{ USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */
- { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */
+ { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */
+ { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */
+ { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */
+ { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */
+ { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */
+ { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */
+ { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */
{ USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */
+ { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */
+ { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */
+ { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */
+ { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */
{ USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */
{ USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */
{ USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */
{ USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */
- { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */
- { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */
- { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */
- { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */
- { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */
+ { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */
+ { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */
{ USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */
- { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */
- { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */
- { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */
- { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */
- { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */
- { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */
- { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */
- { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */
- { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */
- { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */
- { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */
- { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */
- { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */
- { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */
- { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */
- { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */
- { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */
- { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */
- { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */
- { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */
- { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */
- { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */
- { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */
- { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */
- { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */
- { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */
- { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */
- { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */
- { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */
- { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */
- { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */
- { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */
- { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */
- { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */
- { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */
- { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */
+ { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */
{ } /* Terminating entry */
};
@@ -547,9 +551,12 @@ static struct usb_driver ipaq_driver = {
/* All of the device info needed for the Compaq iPAQ */
-static struct usb_serial_device_type ipaq_device = {
- .owner = THIS_MODULE,
- .name = "PocketPC PDA",
+static struct usb_serial_driver ipaq_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ipaq",
+ },
+ .description = "PocketPC PDA",
.id_table = ipaq_id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 85e242459c2..a02fada8536 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -443,10 +443,12 @@ static int ipw_disconnect(struct usb_serial_port *port)
return 0;
}
-static struct usb_serial_device_type ipw_device = {
- .owner = THIS_MODULE,
- .name = "IPWireless converter",
- .short_name = "ipw",
+static struct usb_serial_driver ipw_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ipw",
+ },
+ .description = "IPWireless converter",
.id_table = usb_ipw_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 937b2fdd717..19f329e9bdc 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -133,9 +133,12 @@ static struct usb_driver ir_driver = {
};
-static struct usb_serial_device_type ir_device = {
- .owner = THIS_MODULE,
- .name = "IR Dongle",
+static struct usb_serial_driver ir_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ir-usb",
+ },
+ .description = "IR Dongle",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index e9b45b768ac..5cfc13b5e56 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -570,10 +570,12 @@ static struct usb_device_id keyspan_4port_ids[] = {
};
/* Structs for the devices, pre and post renumeration. */
-static struct usb_serial_device_type keyspan_pre_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan - (without firmware)",
- .short_name = "keyspan_no_firm",
+static struct usb_serial_driver keyspan_pre_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_no_firm",
+ },
+ .description = "Keyspan - (without firmware)",
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -582,10 +584,12 @@ static struct usb_serial_device_type keyspan_pre_device = {
.attach = keyspan_fake_startup,
};
-static struct usb_serial_device_type keyspan_1port_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan 1 port adapter",
- .short_name = "keyspan_1",
+static struct usb_serial_driver keyspan_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_1",
+ },
+ .description = "Keyspan 1 port adapter",
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -607,10 +611,12 @@ static struct usb_serial_device_type keyspan_1port_device = {
.shutdown = keyspan_shutdown,
};
-static struct usb_serial_device_type keyspan_2port_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan 2 port adapter",
- .short_name = "keyspan_2",
+static struct usb_serial_driver keyspan_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_2",
+ },
+ .description = "Keyspan 2 port adapter",
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -632,10 +638,12 @@ static struct usb_serial_device_type keyspan_2port_device = {
.shutdown = keyspan_shutdown,
};
-static struct usb_serial_device_type keyspan_4port_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan 4 port adapter",
- .short_name = "keyspan_4",
+static struct usb_serial_driver keyspan_4port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_4",
+ },
+ .description = "Keyspan 4 port adapter",
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 5,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 635c384cb15..cd4f48bd83b 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -783,10 +783,12 @@ static void keyspan_pda_shutdown (struct usb_serial *serial)
}
#ifdef KEYSPAN
-static struct usb_serial_device_type keyspan_pda_fake_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan PDA - (prerenumeration)",
- .short_name = "keyspan_pda_pre",
+static struct usb_serial_driver keyspan_pda_fake_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_pda_pre",
+ },
+ .description = "Keyspan PDA - (prerenumeration)",
.id_table = id_table_fake,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -797,10 +799,12 @@ static struct usb_serial_device_type keyspan_pda_fake_device = {
#endif
#ifdef XIRCOM
-static struct usb_serial_device_type xircom_pgs_fake_device = {
- .owner = THIS_MODULE,
- .name = "Xircom / Entregra PGS - (prerenumeration)",
- .short_name = "xircom_no_firm",
+static struct usb_serial_driver xircom_pgs_fake_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "xircom_no_firm",
+ },
+ .description = "Xircom / Entregra PGS - (prerenumeration)",
.id_table = id_table_fake_xircom,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -810,10 +814,12 @@ static struct usb_serial_device_type xircom_pgs_fake_device = {
};
#endif
-static struct usb_serial_device_type keyspan_pda_device = {
- .owner = THIS_MODULE,
- .name = "Keyspan PDA",
- .short_name = "keyspan_pda",
+static struct usb_serial_driver keyspan_pda_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "keyspan_pda",
+ },
+ .description = "Keyspan PDA",
.id_table = id_table_std,
.num_interrupt_in = 1,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index a11e829e38c..a8951c0fd02 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -123,10 +123,12 @@ static struct usb_driver kl5kusb105d_driver = {
.id_table = id_table,
};
-static struct usb_serial_device_type kl5kusb105d_device = {
- .owner = THIS_MODULE,
- .name = "KL5KUSB105D / PalmConnect",
- .short_name = "kl5kusb105d",
+static struct usb_serial_driver kl5kusb105d_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "kl5kusb105d",
+ },
+ .description = "KL5KUSB105D / PalmConnect",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index fe4c98a7517..9456dd9dd13 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -105,9 +105,12 @@ static struct usb_driver kobil_driver = {
};
-static struct usb_serial_device_type kobil_device = {
- .owner = THIS_MODULE,
- .name = "KOBIL USB smart card terminal",
+static struct usb_serial_driver kobil_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "kobil",
+ },
+ .description = "KOBIL USB smart card terminal",
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 50b6369647d..ca5dbadb9b7 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -132,10 +132,12 @@ static struct usb_driver mct_u232_driver = {
.id_table = id_table_combined,
};
-static struct usb_serial_device_type mct_u232_device = {
- .owner = THIS_MODULE,
- .name = "MCT U232",
- .short_name = "mct_u232",
+static struct usb_serial_driver mct_u232_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "mct_u232",
+ },
+ .description = "MCT U232",
.id_table = id_table_combined,
.num_interrupt_in = 2,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/nokia_dku2.c b/drivers/usb/serial/nokia_dku2.c
new file mode 100644
index 00000000000..fad01bef3a6
--- /dev/null
+++ b/drivers/usb/serial/nokia_dku2.c
@@ -0,0 +1,142 @@
+/*
+ * Nokia DKU2 USB driver
+ *
+ * Copyright (C) 2004
+ * Author: C Kemp
+ *
+ * This program is largely derived from work by the linux-usb group
+ * and associated source files. Please see the usb/serial files for
+ * individual credits and copyrights.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
+ * Added short name to device structure to make driver load into kernel 2.6.13
+ *
+ * 20.09.2005 - Matthias Blaesing <matthias.blaesing@rwth-aachen.de>
+ * Added usb_deregister to exit code - to allow remove and reinsert of module
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+#define NOKIA_VENDOR_ID 0x0421
+#define NOKIA7600_PRODUCT_ID 0x0400
+#define NOKIA6230_PRODUCT_ID 0x040f
+#define NOKIA6170_PRODUCT_ID 0x0416
+#define NOKIA6670_PRODUCT_ID 0x041d
+#define NOKIA6680_PRODUCT_ID 0x041e
+#define NOKIA6230i_PRODUCT_ID 0x0428
+
+#define NOKIA_AT_PORT 0x82
+#define NOKIA_FBUS_PORT 0x86
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.2"
+#define DRIVER_AUTHOR "C Kemp"
+#define DRIVER_DESC "Nokia DKU2 Driver"
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA7600_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6170_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6670_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6680_PRODUCT_ID) },
+ { USB_DEVICE(NOKIA_VENDOR_ID, NOKIA6230i_PRODUCT_ID) },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+/* The only thing which makes this device different from a generic
+ * device is that we have to set an alternative configuration to make
+ * the relevant endpoints available. In 2.6 this is really easy... */
+static int nokia_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ int retval = -ENODEV;
+
+ if (serial->interface->altsetting[0].endpoint[0].desc.bEndpointAddress == NOKIA_AT_PORT) {
+ /* the AT port */
+ dev_info(&serial->dev->dev, "Nokia AT Port:\n");
+ retval = 0;
+ } else if (serial->interface->num_altsetting == 2 &&
+ serial->interface->altsetting[1].endpoint[0].desc.bEndpointAddress == NOKIA_FBUS_PORT) {
+ /* the FBUS port */
+ dev_info(&serial->dev->dev, "Nokia FBUS Port:\n");
+ usb_set_interface(serial->dev, 10, 1);
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static struct usb_driver nokia_driver = {
+ .owner = THIS_MODULE,
+ .name = "nokia_dku2",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+};
+
+static struct usb_serial_driver nokia_serial_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "nokia_dku2",
+ },
+ .description = "Nokia 7600/6230(i)/6170/66x0 DKU2 driver",
+ .id_table = id_table,
+ .num_interrupt_in = 1,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .probe = nokia_probe,
+};
+
+static int __init nokia_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&nokia_serial_driver);
+ if (retval)
+ return retval;
+
+ retval = usb_register(&nokia_driver);
+ if (retval) {
+ usb_serial_deregister(&nokia_serial_driver);
+ return retval;
+ }
+
+ info(DRIVER_VERSION " " DRIVER_AUTHOR);
+ info(DRIVER_DESC);
+
+ return retval;
+}
+
+static void __exit nokia_exit(void)
+{
+ usb_deregister(&nokia_driver);
+ usb_serial_deregister(&nokia_serial_driver);
+}
+
+module_init(nokia_init);
+module_exit(nokia_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 6a99ae192df..3caf97072ac 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -88,10 +88,12 @@ static struct usb_driver omninet_driver = {
};
-static struct usb_serial_device_type zyxel_omninet_device = {
- .owner = THIS_MODULE,
- .name = "ZyXEL - omni.net lcd plus usb",
- .short_name = "omninet",
+static struct usb_serial_driver zyxel_omninet_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "omninet",
+ },
+ .description = "ZyXEL - omni.net lcd plus usb",
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 4989e5740d1..7716000045b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -105,10 +105,12 @@ static struct usb_driver option_driver = {
/* The card has three separate interfaces, wich the serial driver
* recognizes separately, thus num_port=1.
*/
-static struct usb_serial_device_type option_3port_device = {
- .owner = THIS_MODULE,
- .name = "Option 3G data card",
- .short_name = "option",
+static struct usb_serial_driver option_3port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "option",
+ },
+ .description = "Option 3G data card",
.id_table = option_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 3cf245bdda5..165c119bf10 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -8,31 +8,10 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * 2002_Mar_26 gkh
- * allowed driver to work properly if there is no tty assigned to a port
- * (this happens for serial console devices.)
- *
- * 2001_Oct_06 gkh
- * Added RTS and DTR line control. Thanks to joe@bndlg.de for parts of it.
- *
- * 2001_Sep_19 gkh
- * Added break support.
- *
- * 2001_Aug_30 gkh
- * fixed oops in write_bulk_callback.
- *
- * 2001_Aug_28 gkh
- * reworked buffer logic to be like other usb-serial drivers. Hopefully
- * removing some reported problems.
- *
- * 2001_Jun_06 gkh
- * finished porting to 2.4 format.
- *
*/
#include <linux/config.h>
@@ -55,7 +34,6 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.12"
#define DRIVER_DESC "Prolific PL2303 USB to serial adaptor driver"
static int debug;
@@ -175,9 +153,11 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
/* All of the device info needed for the PL2303 SIO serial converter */
-static struct usb_serial_device_type pl2303_device = {
- .owner = THIS_MODULE,
- .name = "PL-2303",
+static struct usb_serial_driver pl2303_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pl2303",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
@@ -1195,7 +1175,7 @@ static int __init pl2303_init (void)
retval = usb_register(&pl2303_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return 0;
failed_usb_register:
usb_serial_deregister(&pl2303_device);
@@ -1215,7 +1195,6 @@ module_init(pl2303_init);
module_exit(pl2303_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 96a17568cbf..c22bdc0c4df 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -92,7 +92,7 @@ MODULE_DESCRIPTION (DRIVER_DESC);
MODULE_LICENSE("GPL");
#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT)
-#abort "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
+#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
#endif
#if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR)
@@ -397,9 +397,11 @@ static int safe_startup (struct usb_serial *serial)
return 0;
}
-static struct usb_serial_device_type safe_device = {
- .owner = THIS_MODULE,
- .name = "Safe",
+static struct usb_serial_driver safe_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "safe_serial",
+ },
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 59c88de3e7a..205dbf7201d 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -255,9 +255,12 @@ static struct usb_driver ti_usb_driver = {
.id_table = ti_id_table_combined,
};
-static struct usb_serial_device_type ti_1port_device = {
- .owner = THIS_MODULE,
- .name = "TI USB 3410 1 port adapter",
+static struct usb_serial_driver ti_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ti_usb_3410_5052_1",
+ },
+ .description = "TI USB 3410 1 port adapter",
.id_table = ti_id_table_3410,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -282,9 +285,12 @@ static struct usb_serial_device_type ti_1port_device = {
.write_bulk_callback = ti_bulk_out_callback,
};
-static struct usb_serial_device_type ti_2port_device = {
- .owner = THIS_MODULE,
- .name = "TI USB 5052 2 port adapter",
+static struct usb_serial_driver ti_2port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ti_usb_3410_5052_2",
+ },
+ .description = "TI USB 5052 2 port adapter",
.id_table = ti_id_table_5052,
.num_interrupt_in = 1,
.num_bulk_in = 2,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e77fbdfc782..0c4881d18cd 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1,7 +1,7 @@
/*
* USB Serial Converter driver
*
- * Copyright (C) 1999 - 2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 1999 - 2005 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2000 Peter Berger (pberger@brimson.com)
* Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com)
*
@@ -9,316 +9,11 @@
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
- * This driver was originally based on the ACM driver by Armin Fuerst (which was
+ * This driver was originally based on the ACM driver by Armin Fuerst (which was
* based on a driver by Brad Keryan)
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * (12/10/2002) gkh
- * Split the ports off into their own struct device, and added a
- * usb-serial bus driver.
- *
- * (11/19/2002) gkh
- * removed a few #ifdefs for the generic code and cleaned up the failure
- * logic in initialization.
- *
- * (10/02/2002) gkh
- * moved the console code to console.c and out of this file.
- *
- * (06/05/2002) gkh
- * moved location of startup() call in serial_probe() until after all
- * of the port information and endpoints are initialized. This makes
- * things easier for some drivers.
- *
- * (04/10/2002) gkh
- * added serial_read_proc function which creates a
- * /proc/tty/driver/usb-serial file.
- *
- * (03/27/2002) gkh
- * Got USB serial console code working properly and merged into the main
- * version of the tree. Thanks to Randy Dunlap for the initial version
- * of this code, and for pushing me to finish it up.
- * The USB serial console works with any usb serial driver device.
- *
- * (03/21/2002) gkh
- * Moved all manipulation of port->open_count into the core. Now the
- * individual driver's open and close functions are called only when the
- * first open() and last close() is called. Making the drivers a bit
- * smaller and simpler.
- * Fixed a bug if a driver didn't have the owner field set.
- *
- * (02/26/2002) gkh
- * Moved all locking into the main serial_* functions, instead of having
- * the individual drivers have to grab the port semaphore. This should
- * reduce races.
- * Reworked the MOD_INC logic a bit to always increment and decrement, even
- * if the generic driver is being used.
- *
- * (10/10/2001) gkh
- * usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
- * help prevent child drivers from accessing the device since it is now
- * gone.
- *
- * (09/13/2001) gkh
- * Moved generic driver initialize after we have registered with the USB
- * core. Thanks to Randy Dunlap for pointing this problem out.
- *
- * (07/03/2001) gkh
- * Fixed module paramater size. Thanks to John Brockmeyer for the pointer.
- * Fixed vendor and product getting defined through the MODULE_PARM macro
- * if the Generic driver wasn't compiled in.
- * Fixed problem with generic_shutdown() not being called for drivers that
- * don't have a shutdown() function.
- *
- * (06/06/2001) gkh
- * added evil hack that is needed for the prolific pl2303 device due to the
- * crazy way its endpoints are set up.
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * 2001_02_05 gkh
- * Fixed buffer overflows bug with the generic serial driver. Thanks to
- * Todd Squires <squirest@ct0.com> for fixing this.
- *
- * (01/10/2001) gkh
- * Fixed bug where the generic serial adaptor grabbed _any_ device that was
- * offered to it.
- *
- * (12/12/2000) gkh
- * Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
- * moved them to the serial_open and serial_close functions.
- * Also fixed bug with there not being a MOD_DEC for the generic driver
- * (thanks to Gary Brubaker for finding this.)
- *
- * (11/29/2000) gkh
- * Small NULL pointer initialization cleanup which saves a bit of disk image
- *
- * (11/01/2000) Adam J. Richter
- * instead of using idVendor/idProduct pairs, usb serial drivers
- * now identify their hardware interest with usb_device_id tables,
- * which they usually have anyhow for use with MODULE_DEVICE_TABLE.
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (09/11/2000) gkh
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (08/28/2000) gkh
- * Added port_lock to port structure.
- * Added locks for SMP safeness to generic driver
- * Fixed the ability to open a generic device's port more than once.
- *
- * (07/23/2000) gkh
- * Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- * Modifications to allow usb-serial drivers to be modules.
- *
- * (07/03/2000) gkh
- * Added more debugging to serial_ioctl call
- *
- * (06/25/2000) gkh
- * Changed generic_write_bulk_callback to not call wake_up_interruptible
- * directly, but to have port_softint do it at a safer time.
- *
- * (06/23/2000) gkh
- * Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (05/22/2000) gkh
- * Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
- * removed from the individual device source files.
- *
- * (05/03/2000) gkh
- * Added the Digi Acceleport driver from Al Borchers and Peter Berger.
- *
- * (05/02/2000) gkh
- * Changed devfs and tty register code to work properly now. This was based on
- * the ACM driver changes by Vojtech Pavlik.
- *
- * (04/27/2000) Ryan VanderBijl
- * Put calls to *_paranoia_checks into one function.
- *
- * (04/23/2000) gkh
- * Fixed bug that Randy Dunlap found for Generic devices with no bulk out ports.
- * Moved when the startup code printed out the devices that are supported.
- *
- * (04/19/2000) gkh
- * Added driver for ZyXEL omni.net lcd plus ISDN TA
- * Made startup info message specify which drivers were compiled in.
- *
- * (04/03/2000) gkh
- * Changed the probe process to remove the module unload races.
- * Changed where the tty layer gets initialized to have devfs work nicer.
- * Added initial devfs support.
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
- * (03/19/2000) gkh
- * Fixed oops that could happen when device was removed while a program
- * was talking to the device.
- * Removed the static urbs and now all urbs are created and destroyed
- * dynamically.
- * Reworked the internal interface. Now everything is based on the
- * usb_serial_port structure instead of the larger usb_serial structure.
- * This fixes the bug that a multiport device could not have more than
- * one port open at one time.
- *
- * (03/17/2000) gkh
- * Added config option for debugging messages.
- * Added patch for keyspan pda from Brian Warner.
- *
- * (03/06/2000) gkh
- * Added the keyspan pda code from Brian Warner <warner@lothar.com>
- * Moved a bunch of the port specific stuff into its own structure. This
- * is in anticipation of the true multiport devices (there's a bug if you
- * try to access more than one port of any multiport device right now)
- *
- * (02/21/2000) gkh
- * Made it so that any serial devices only have to specify which functions
- * they want to overload from the generic function calls (great,
- * inheritance in C, in a driver, just what I wanted...)
- * Added support for set_termios and ioctl function calls. No drivers take
- * advantage of this yet.
- * Removed the #ifdef MODULE, now there is no module specific code.
- * Cleaned up a few comments in usb-serial.h that were wrong (thanks again
- * to Miles Lott).
- * Small fix to get_free_serial.
- *
- * (02/14/2000) gkh
- * Removed the Belkin and Peracom functionality from the driver due to
- * the lack of support from the vendor, and me not wanting people to
- * accidenatly buy the device, expecting it to work with Linux.
- * Added read_bulk_callback and write_bulk_callback to the type structure
- * for the needs of the FTDI and WhiteHEAT driver.
- * Changed all reverences to FTDI to FTDI_SIO at the request of Bill
- * Ryder.
- * Changed the output urb size back to the max endpoint size to make
- * the ftdi_sio driver have it easier, and due to the fact that it didn't
- * really increase the speed any.
- *
- * (02/11/2000) gkh
- * Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
- * patch from Miles Lott (milos@insync.net).
- * Fixed bug with not restoring the minor range that a device grabs, if
- * the startup function fails (thanks Miles for finding this).
- *
- * (02/05/2000) gkh
- * Added initial framework for the Keyspan PDA serial converter so that
- * Brian Warner has a place to put his code.
- * Made the ezusb specific functions generic enough that different
- * devices can use them (whiteheat and keyspan_pda both need them).
- * Split out a whole bunch of structure and other stuff to a separate
- * usb-serial.h file.
- * Made the Visor connection messages a little more understandable, now
- * that Miles Lott (milos@insync.net) has gotten the Generic channel to
- * work. Also made them always show up in the log file.
- *
- * (01/25/2000) gkh
- * Added initial framework for FTDI serial converter so that Bill Ryder
- * has a place to put his code.
- * Added the vendor specific info from Handspring. Now we can print out
- * informational debug messages as well as understand what is happening.
- *
- * (01/23/2000) gkh
- * Fixed problem of crash when trying to open a port that didn't have a
- * device assigned to it. Made the minor node finding a little smarter,
- * now it looks to find a continuous space for the new device.
- *
- * (01/21/2000) gkh
- * Fixed bug in visor_startup with patch from Miles Lott (milos@insync.net)
- * Fixed get_serial_by_minor which was all messed up for multi port
- * devices. Fixed multi port problem for generic devices. Now the number
- * of ports is determined by the number of bulk out endpoints for the
- * generic device.
- *
- * (01/19/2000) gkh
- * Removed lots of cruft that was around from the old (pre urb) driver
- * interface.
- * Made the serial_table dynamic. This should save lots of memory when
- * the number of minor nodes goes up to 256.
- * Added initial support for devices that have more than one port.
- * Added more debugging comments for the Visor, and added a needed
- * set_configuration call.
- *
- * (01/17/2000) gkh
- * Fixed the WhiteHEAT firmware (my processing tool had a bug)
- * and added new debug loader firmware for it.
- * Removed the put_char function as it isn't really needed.
- * Added visor startup commands as found by the Win98 dump.
- *
- * (01/13/2000) gkh
- * Fixed the vendor id for the generic driver to the one I meant it to be.
- *
- * (01/12/2000) gkh
- * Forget the version numbering...that's pretty useless...
- * Made the driver able to be compiled so that the user can select which
- * converter they want to use. This allows people who only want the Visor
- * support to not pay the memory size price of the WhiteHEAT.
- * Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
- * grabbed the root hub. Not good.
- *
- * version 0.4.0 (01/10/2000) gkh
- * Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
- * device. Added startup function to allow firmware to be downloaded to
- * a device if it needs to be.
- * Added firmware download logic to the WhiteHEAT device.
- * Started to add #defines to split up the different drivers for potential
- * configuration option.
- *
- * version 0.3.1 (12/30/99) gkh
- * Fixed problems with urb for bulk out.
- * Added initial support for multiple sets of endpoints. This enables
- * the Handspring Visor to be attached successfully. Only the first
- * bulk in / bulk out endpoint pair is being used right now.
- *
- * version 0.3.0 (12/27/99) gkh
- * Added initial support for the Handspring Visor based on a patch from
- * Miles Lott (milos@sneety.insync.net)
- * Cleaned up the code a bunch and converted over to using urbs only.
- *
- * version 0.2.3 (12/21/99) gkh
- * Added initial support for the Connect Tech WhiteHEAT converter.
- * Incremented the number of ports in expectation of getting the
- * WhiteHEAT to work properly (4 ports per connection).
- * Added notification on insertion and removal of what port the
- * device is/was connected to (and what kind of device it was).
- *
- * version 0.2.2 (12/16/99) gkh
- * Changed major number to the new allocated number. We're legal now!
- *
- * version 0.2.1 (12/14/99) gkh
- * Fixed bug that happens when device node is opened when there isn't a
- * device attached to it. Thanks to marek@webdesign.no for noticing this.
- *
- * version 0.2.0 (11/10/99) gkh
- * Split up internals to make it easier to add different types of serial
- * converters to the code.
- * Added a "generic" driver that gets it's vendor and product id
- * from when the module is loaded. Thanks to David E. Nelson (dnelson@jump.net)
- * for the idea and sample code (from the usb scanner driver.)
- * Cleared up any licensing questions by releasing it under the GNU GPL.
- *
- * version 0.1.2 (10/25/99) gkh
- * Fixed bug in detecting device.
- *
- * version 0.1.1 (10/05/99) gkh
- * Changed the major number to not conflict with anything else.
- *
- * version 0.1 (09/28/99) gkh
- * Can recognize the two different devices and start up a read from
- * device when asked to. Writes also work. No control signals yet, this
- * all is vendor specific data (i.e. no spec), also no control for
- * different baud rates or other bit settings.
- * Currently we are using the same devid as the acm driver. This needs
- * to change.
- *
*/
#include <linux/config.h>
@@ -342,7 +37,6 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v2.0"
#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com, http://www.kroah.com/linux/"
#define DRIVER_DESC "USB Serial Driver core"
@@ -427,7 +121,7 @@ static void destroy_serial(struct kref *kref)
serial = to_usb_serial(kref);
- dbg ("%s - %s", __FUNCTION__, serial->type->name);
+ dbg("%s - %s", __FUNCTION__, serial->type->description);
serial->type->shutdown(serial);
@@ -507,7 +201,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
/* lock this module before we call it
* this may fail, which means we must bail out,
* safe because we are called with BKL held */
- if (!try_module_get(serial->type->owner)) {
+ if (!try_module_get(serial->type->driver.owner)) {
retval = -ENODEV;
goto bailout_kref_put;
}
@@ -522,7 +216,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
return 0;
bailout_module_put:
- module_put(serial->type->owner);
+ module_put(serial->type->driver.owner);
bailout_kref_put:
kref_put(&serial->kref, destroy_serial);
port->open_count = 0;
@@ -553,7 +247,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
port->tty = NULL;
}
- module_put(port->serial->type->owner);
+ module_put(port->serial->type->driver.owner);
}
kref_put(&port->serial->kref, destroy_serial);
@@ -711,16 +405,16 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int
char tmp[40];
dbg("%s", __FUNCTION__);
- length += sprintf (page, "usbserinfo:1.0 driver:%s\n", DRIVER_VERSION);
+ length += sprintf (page, "usbserinfo:1.0 driver:2.0\n");
for (i = 0; i < SERIAL_TTY_MINORS && length < PAGE_SIZE; ++i) {
serial = usb_serial_get_by_index(i);
if (serial == NULL)
continue;
length += sprintf (page+length, "%d:", i);
- if (serial->type->owner)
- length += sprintf (page+length, " module:%s", module_name(serial->type->owner));
- length += sprintf (page+length, " name:\"%s\"", serial->type->name);
+ if (serial->type->driver.owner)
+ length += sprintf (page+length, " module:%s", module_name(serial->type->driver.owner));
+ length += sprintf (page+length, " name:\"%s\"", serial->type->description);
length += sprintf (page+length, " vendor:%04x product:%04x",
le16_to_cpu(serial->dev->descriptor.idVendor),
le16_to_cpu(serial->dev->descriptor.idProduct));
@@ -823,7 +517,7 @@ static void port_release(struct device *dev)
static struct usb_serial * create_serial (struct usb_device *dev,
struct usb_interface *interface,
- struct usb_serial_device_type *type)
+ struct usb_serial_driver *driver)
{
struct usb_serial *serial;
@@ -834,22 +528,22 @@ static struct usb_serial * create_serial (struct usb_device *dev,
}
memset (serial, 0, sizeof(*serial));
serial->dev = usb_get_dev(dev);
- serial->type = type;
+ serial->type = driver;
serial->interface = interface;
kref_init(&serial->kref);
return serial;
}
-static struct usb_serial_device_type *search_serial_device(struct usb_interface *iface)
+static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
{
struct list_head *p;
const struct usb_device_id *id;
- struct usb_serial_device_type *t;
+ struct usb_serial_driver *t;
/* List trough know devices and see if the usb id matches */
list_for_each(p, &usb_serial_driver_list) {
- t = list_entry(p, struct usb_serial_device_type, driver_list);
+ t = list_entry(p, struct usb_serial_driver, driver_list);
id = usb_match_id(iface, t->id_table);
if (id != NULL) {
dbg("descriptor matches");
@@ -872,7 +566,7 @@ int usb_serial_probe(struct usb_interface *interface,
struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
- struct usb_serial_device_type *type = NULL;
+ struct usb_serial_driver *type = NULL;
int retval;
int minor;
int buffer_size;
@@ -900,7 +594,7 @@ int usb_serial_probe(struct usb_interface *interface,
if (type->probe) {
const struct usb_device_id *id;
- if (!try_module_get(type->owner)) {
+ if (!try_module_get(type->driver.owner)) {
dev_err(&interface->dev, "module get failed, exiting\n");
kfree (serial);
return -EIO;
@@ -908,7 +602,7 @@ int usb_serial_probe(struct usb_interface *interface,
id = usb_match_id(interface, type->id_table);
retval = type->probe(serial, id);
- module_put(type->owner);
+ module_put(type->driver.owner);
if (retval) {
dbg ("sub driver rejected device");
@@ -992,7 +686,7 @@ int usb_serial_probe(struct usb_interface *interface,
#endif
/* found all that we need */
- dev_info(&interface->dev, "%s converter detected\n", type->name);
+ dev_info(&interface->dev, "%s converter detected\n", type->description);
#ifdef CONFIG_USB_SERIAL_GENERIC
if (type == &usb_serial_generic_device) {
@@ -1007,13 +701,13 @@ int usb_serial_probe(struct usb_interface *interface,
if (!num_ports) {
/* if this device type has a calc_num_ports function, call it */
if (type->calc_num_ports) {
- if (!try_module_get(type->owner)) {
+ if (!try_module_get(type->driver.owner)) {
dev_err(&interface->dev, "module get failed, exiting\n");
kfree (serial);
return -EIO;
}
num_ports = type->calc_num_ports (serial);
- module_put(type->owner);
+ module_put(type->driver.owner);
}
if (!num_ports)
num_ports = type->num_ports;
@@ -1158,12 +852,12 @@ int usb_serial_probe(struct usb_interface *interface,
/* if this device type has an attach function, call it */
if (type->attach) {
- if (!try_module_get(type->owner)) {
+ if (!try_module_get(type->driver.owner)) {
dev_err(&interface->dev, "module get failed, exiting\n");
goto probe_error;
}
retval = type->attach (serial);
- module_put(type->owner);
+ module_put(type->driver.owner);
if (retval < 0)
goto probe_error;
if (retval > 0) {
@@ -1330,7 +1024,7 @@ static int __init usb_serial_init(void)
goto exit_generic;
}
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return result;
@@ -1375,7 +1069,7 @@ module_exit(usb_serial_exit);
} \
} while (0)
-static void fixup_generic(struct usb_serial_device_type *device)
+static void fixup_generic(struct usb_serial_driver *device)
{
set_to_generic_if_null(device, open);
set_to_generic_if_null(device, write);
@@ -1387,30 +1081,33 @@ static void fixup_generic(struct usb_serial_device_type *device)
set_to_generic_if_null(device, shutdown);
}
-int usb_serial_register(struct usb_serial_device_type *new_device)
+int usb_serial_register(struct usb_serial_driver *driver)
{
int retval;
- fixup_generic(new_device);
+ fixup_generic(driver);
+
+ if (!driver->description)
+ driver->description = driver->driver.name;
/* Add this device to our list of devices */
- list_add(&new_device->driver_list, &usb_serial_driver_list);
+ list_add(&driver->driver_list, &usb_serial_driver_list);
- retval = usb_serial_bus_register(new_device);
+ retval = usb_serial_bus_register(driver);
if (retval) {
- err("problem %d when registering driver %s", retval, new_device->name);
- list_del(&new_device->driver_list);
+ err("problem %d when registering driver %s", retval, driver->description);
+ list_del(&driver->driver_list);
}
else
- info("USB Serial support registered for %s", new_device->name);
+ info("USB Serial support registered for %s", driver->description);
return retval;
}
-void usb_serial_deregister(struct usb_serial_device_type *device)
+void usb_serial_deregister(struct usb_serial_driver *device)
{
- info("USB Serial deregistering driver %s", device->name);
+ info("USB Serial deregistering driver %s", device->description);
list_del(&device->driver_list);
usb_serial_bus_deregister(device);
}
@@ -1429,7 +1126,6 @@ EXPORT_SYMBOL_GPL(usb_serial_port_softint);
/* Module information */
MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
-MODULE_VERSION( DRIVER_VERSION );
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index 57f92f054c7..238a5a871ed 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -1,53 +1,13 @@
/*
* USB Serial Converter driver
*
- * Copyright (C) 1999 - 2004
+ * Copyright (C) 1999 - 2005
* Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
- *
- * (03/26/2002) gkh
- * removed the port->tty check from port_paranoia_check() due to serial
- * consoles not having a tty device assigned to them.
- *
- * (12/03/2001) gkh
- * removed active from the port structure.
- * added documentation to the usb_serial_device_type structure
- *
- * (10/10/2001) gkh
- * added vendor and product to serial structure. Needed to determine device
- * owner when the device is disconnected.
- *
- * (05/30/2001) gkh
- * added sem to port structure and removed port_lock
- *
- * (10/05/2000) gkh
- * Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
- * fix bug with urb->dev not being set properly, now that the usb core
- * needs it.
- *
- * (09/11/2000) gkh
- * Added usb_serial_debug_data function to help get rid of #DEBUG in the
- * drivers.
- *
- * (08/28/2000) gkh
- * Added port_lock to port structure.
- *
- * (08/08/2000) gkh
- * Added open_count to port structure.
- *
- * (07/23/2000) gkh
- * Added bulk_out_endpointAddress to port structure.
- *
- * (07/19/2000) gkh, pberger, and borchers
- * Modifications to allow usb-serial drivers to be modules.
- *
- *
*/
@@ -143,7 +103,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void
/**
* usb_serial - structure used by the usb-serial core for a device
* @dev: pointer to the struct usb_device for this device
- * @type: pointer to the struct usb_serial_device_type for this device
+ * @type: pointer to the struct usb_serial_driver for this device
* @interface: pointer to the struct usb_interface for this device
* @minor: the starting minor number for this device
* @num_ports: the number of ports this device has
@@ -159,7 +119,7 @@ static inline void usb_set_serial_port_data (struct usb_serial_port *port, void
*/
struct usb_serial {
struct usb_device * dev;
- struct usb_serial_device_type * type;
+ struct usb_serial_driver * type;
struct usb_interface * interface;
unsigned char minor;
unsigned char num_ports;
@@ -188,13 +148,9 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
}
/**
- * usb_serial_device_type - a structure that defines a usb serial device
- * @owner: pointer to the module that owns this device.
- * @name: pointer to a string that describes this device. This string used
+ * usb_serial_driver - describes a usb serial driver
+ * @description: pointer to a string that describes this driver. This string used
* in the syslog messages when a device is inserted or removed.
- * @short_name: a pointer to a string that describes this device in
- * KOBJ_NAME_LEN characters or less. This is used for the sysfs interface
- * to describe the driver.
* @id_table: pointer to a list of usb_device_id structures that define all
* of the devices this structure can support.
* @num_interrupt_in: the number of interrupt in endpoints this device will
@@ -221,16 +177,19 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
* @shutdown: pointer to the driver's shutdown function. This will be
* called when the device is removed from the system.
*
- * This structure is defines a USB Serial device. It provides all of
+ * This structure is defines a USB Serial driver. It provides all of
* the information that the USB serial core code needs. If the function
* pointers are defined, then the USB serial core code will call them when
* the corresponding tty port functions are called. If they are not
* called, the generic serial function will be used instead.
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver (remember
+ * it will show up in sysfs, so it needs to be short and to the point.
+ * Useing the module name is a good idea.)
*/
-struct usb_serial_device_type {
- struct module *owner;
- char *name;
- char *short_name;
+struct usb_serial_driver {
+ const char *description;
const struct usb_device_id *id_table;
char num_interrupt_in;
char num_interrupt_out;
@@ -269,10 +228,10 @@ struct usb_serial_device_type {
void (*read_bulk_callback)(struct urb *urb, struct pt_regs *regs);
void (*write_bulk_callback)(struct urb *urb, struct pt_regs *regs);
};
-#define to_usb_serial_driver(d) container_of(d, struct usb_serial_device_type, driver)
+#define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
-extern int usb_serial_register(struct usb_serial_device_type *new_device);
-extern void usb_serial_deregister(struct usb_serial_device_type *device);
+extern int usb_serial_register(struct usb_serial_driver *driver);
+extern void usb_serial_deregister(struct usb_serial_driver *driver);
extern void usb_serial_port_softint(void *private);
extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
@@ -303,10 +262,10 @@ extern void usb_serial_generic_shutdown (struct usb_serial *serial);
extern int usb_serial_generic_register (int debug);
extern void usb_serial_generic_deregister (void);
-extern int usb_serial_bus_register (struct usb_serial_device_type *device);
-extern void usb_serial_bus_deregister (struct usb_serial_device_type *device);
+extern int usb_serial_bus_register (struct usb_serial_driver *device);
+extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
-extern struct usb_serial_device_type usb_serial_generic_device;
+extern struct usb_serial_driver usb_serial_generic_device;
extern struct bus_type usb_serial_bus_type;
extern struct tty_driver *usb_serial_tty_driver;
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 31c57adcb62..a473c1c3455 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -7,139 +7,10 @@
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
- * (06/03/2003) Judd Montgomery <judd at jpilot.org>
- * Added support for module parameter options for untested/unknown
- * devices.
- *
- * (03/09/2003) gkh
- * Added support for the Sony Clie NZ90V device. Thanks to Martin Brachtl
- * <brachtl@redgrep.cz> for the information.
- *
- * (03/05/2003) gkh
- * Think Treo support is now working.
- *
- * (04/03/2002) gkh
- * Added support for the Sony OS 4.1 devices. Thanks to Hiroyuki ARAKI
- * <hiro@zob.ne.jp> for the information.
- *
- * (03/27/2002) gkh
- * Removed assumptions that port->tty was always valid (is not true
- * for usb serial console devices.)
- *
- * (03/23/2002) gkh
- * Added support for the Palm i705 device, thanks to Thomas Riemer
- * <tom@netmech.com> for the information.
- *
- * (03/21/2002) gkh
- * Added support for the Palm m130 device, thanks to Udo Eisenbarth
- * <udo.eisenbarth@web.de> for the information.
- *
- * (02/27/2002) gkh
- * Reworked the urb handling logic. We have no more pool, but dynamically
- * allocate the urb and the transfer buffer on the fly. In testing this
- * does not incure any measurable overhead. This also relies on the fact
- * that we have proper reference counting logic for urbs.
- *
- * (02/21/2002) SilaS
- * Added initial support for the Palm m515 devices.
- *
- * (02/14/2002) gkh
- * Added support for the Clie S-360 device.
- *
- * (12/18/2001) gkh
- * Added better Clie support for 3.5 devices. Thanks to Geoffrey Levand
- * for the patch.
- *
- * (11/11/2001) gkh
- * Added support for the m125 devices, and added check to prevent oopses
- * for Clié devices that lie about the number of ports they have.
- *
- * (08/30/2001) gkh
- * Added support for the Clie devices, both the 3.5 and 4.0 os versions.
- * Many thanks to Daniel Burke, and Bryan Payne for helping with this.
- *
- * (08/23/2001) gkh
- * fixed a few potential bugs pointed out by Oliver Neukum.
- *
- * (05/30/2001) gkh
- * switched from using spinlock to a semaphore, which fixes lots of problems.
- *
- * (05/28/2000) gkh
- * Added initial support for the Palm m500 and Palm m505 devices.
- *
- * (04/08/2001) gb
- * Identify version on module load.
- *
- * (01/21/2000) gkh
- * Added write_room and chars_in_buffer, as they were previously using the
- * generic driver versions which is all wrong now that we are using an urb
- * pool. Thanks to Wolfgang Grandegger for pointing this out to me.
- * Removed count assignment in the write function, which was not needed anymore
- * either. Thanks to Al Borchers for pointing this out.
- *
- * (12/12/2000) gkh
- * Moved MOD_DEC to end of visor_close to be nicer, as the final write
- * message can sleep.
- *
- * (11/12/2000) gkh
- * Fixed bug with data being dropped on the floor by forcing tty->low_latency
- * to be on. Hopefully this fixes the OHCI issue!
- *
- * (11/01/2000) Adam J. Richter
- * usb_device_id table support
- *
- * (10/05/2000) gkh
- * Fixed bug with urb->dev not being set properly, now that the usb
- * core needs it.
- *
- * (09/11/2000) gkh
- * Got rid of always calling kmalloc for every urb we wrote out to the
- * device.
- * Added visor_read_callback so we can keep track of bytes in and out for
- * those people who like to know the speed of their device.
- * Removed DEBUG #ifdefs with call to usb_serial_debug_data
- *
- * (09/06/2000) gkh
- * Fixed oops in visor_exit. Need to uncomment usb_unlink_urb call _after_
- * the host controller drivers set urb->dev = NULL when the urb is finished.
- *
- * (08/28/2000) gkh
- * Added locks for SMP safeness.
- *
- * (08/08/2000) gkh
- * Fixed endian problem in visor_startup.
- * Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
- * than once.
- *
- * (07/23/2000) gkh
- * Added pool of write urbs to speed up transfers to the visor.
- *
- * (07/19/2000) gkh
- * Added module_init and module_exit functions to handle the fact that this
- * driver is a loadable module now.
- *
- * (07/03/2000) gkh
- * Added visor_set_ioctl and visor_set_termios functions (they don't do much
- * of anything, but are good for debugging.)
- *
- * (06/25/2000) gkh
- * Fixed bug in visor_unthrottle that should help with the disconnect in PPP
- * bug that people have been reporting.
- *
- * (06/23/2000) gkh
- * Cleaned up debugging statements in a quest to find UHCI timeout bug.
- *
- * (04/27/2000) Ryan VanderBijl
- * Fixed memory leak in visor_close
- *
- * (03/26/2000) gkh
- * Split driver up into device specific pieces.
- *
*/
#include <linux/config.h>
@@ -161,7 +32,6 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v2.1"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
@@ -311,10 +181,12 @@ static struct usb_driver visor_driver = {
};
/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
-static struct usb_serial_device_type handspring_device = {
- .owner = THIS_MODULE,
- .name = "Handspring Visor / Palm OS",
- .short_name = "visor",
+static struct usb_serial_driver handspring_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "visor",
+ },
+ .description = "Handspring Visor / Palm OS",
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
@@ -339,10 +211,12 @@ static struct usb_serial_device_type handspring_device = {
};
/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */
-static struct usb_serial_device_type clie_5_device = {
- .owner = THIS_MODULE,
- .name = "Sony Clie 5.0",
- .short_name = "clie_5",
+static struct usb_serial_driver clie_5_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "clie_5",
+ },
+ .description = "Sony Clie 5.0",
.id_table = clie_id_5_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
@@ -367,10 +241,12 @@ static struct usb_serial_device_type clie_5_device = {
};
/* device info for the Sony Clie OS version 3.5 */
-static struct usb_serial_device_type clie_3_5_device = {
- .owner = THIS_MODULE,
- .name = "Sony Clie 3.5",
- .short_name = "clie_3.5",
+static struct usb_serial_driver clie_3_5_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "clie_3.5",
+ },
+ .description = "Sony Clie 3.5",
.id_table = clie_id_3_5_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
@@ -782,7 +658,7 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
break;
}
dev_info(dev, "%s: port %d, is for %s use\n",
- serial->type->name,
+ serial->type->description,
connection_info->connections[i].port, string);
}
}
@@ -791,11 +667,11 @@ static int palm_os_3_probe (struct usb_serial *serial, const struct usb_device_i
*/
if (num_ports == 0 || num_ports > 2) {
dev_warn (dev, "%s: No valid connect info available\n",
- serial->type->name);
+ serial->type->description);
num_ports = 2;
}
- dev_info(dev, "%s: Number of ports: %d\n", serial->type->name,
+ dev_info(dev, "%s: Number of ports: %d\n", serial->type->description,
num_ports);
/*
@@ -1125,7 +1001,7 @@ static int __init visor_init (void)
retval = usb_register(&visor_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ info(DRIVER_DESC);
return 0;
failed_usb_register:
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index cf3bc30675a..18c3183be76 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -156,10 +156,12 @@ static void whiteheat_unthrottle (struct usb_serial_port *port);
static void whiteheat_read_callback (struct urb *urb, struct pt_regs *regs);
static void whiteheat_write_callback (struct urb *urb, struct pt_regs *regs);
-static struct usb_serial_device_type whiteheat_fake_device = {
- .owner = THIS_MODULE,
- .name = "Connect Tech - WhiteHEAT - (prerenumeration)",
- .short_name = "whiteheatnofirm",
+static struct usb_serial_driver whiteheat_fake_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "whiteheatnofirm",
+ },
+ .description = "Connect Tech - WhiteHEAT - (prerenumeration)",
.id_table = id_table_prerenumeration,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -169,10 +171,12 @@ static struct usb_serial_device_type whiteheat_fake_device = {
.attach = whiteheat_firmware_attach,
};
-static struct usb_serial_device_type whiteheat_device = {
- .owner = THIS_MODULE,
- .name = "Connect Tech - WhiteHEAT",
- .short_name = "whiteheat",
+static struct usb_serial_driver whiteheat_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "whiteheat",
+ },
+ .description = "Connect Tech - WhiteHEAT",
.id_table = id_table_std,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -382,10 +386,10 @@ static int whiteheat_attach (struct usb_serial *serial)
usb_clear_halt(serial->dev, pipe);
ret = usb_bulk_msg (serial->dev, pipe, command, 2, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't send command [%d]", serial->type->name, ret);
+ err("%s: Couldn't send command [%d]", serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(command)) {
- err("%s: Send command incomplete [%d]", serial->type->name, alen);
+ err("%s: Send command incomplete [%d]", serial->type->description, alen);
goto no_firmware;
}
@@ -394,19 +398,19 @@ static int whiteheat_attach (struct usb_serial *serial)
usb_clear_halt(serial->dev, pipe);
ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
if (ret) {
- err("%s: Couldn't get results [%d]", serial->type->name, ret);
+ err("%s: Couldn't get results [%d]", serial->type->description, ret);
goto no_firmware;
} else if (alen != sizeof(result)) {
- err("%s: Get results incomplete [%d]", serial->type->name, alen);
+ err("%s: Get results incomplete [%d]", serial->type->description, alen);
goto no_firmware;
} else if (result[0] != command[0]) {
- err("%s: Command failed [%d]", serial->type->name, result[0]);
+ err("%s: Command failed [%d]", serial->type->description, result[0]);
goto no_firmware;
}
hw_info = (struct whiteheat_hw_info *)&result[1];
- info("%s: Driver %s: Firmware v%d.%02d", serial->type->name,
+ info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
for (i = 0; i < serial->num_ports; i++) {
@@ -414,7 +418,7 @@ static int whiteheat_attach (struct usb_serial *serial)
info = (struct whiteheat_private *)kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
if (info == NULL) {
- err("%s: Out of memory for port structures\n", serial->type->name);
+ err("%s: Out of memory for port structures\n", serial->type->description);
goto no_private;
}
@@ -484,7 +488,7 @@ static int whiteheat_attach (struct usb_serial *serial)
command_info = (struct whiteheat_command_private *)kmalloc(sizeof(struct whiteheat_command_private), GFP_KERNEL);
if (command_info == NULL) {
- err("%s: Out of memory for port structures\n", serial->type->name);
+ err("%s: Out of memory for port structures\n", serial->type->description);
goto no_command_private;
}
@@ -501,9 +505,9 @@ static int whiteheat_attach (struct usb_serial *serial)
no_firmware:
/* Firmware likely not running */
- err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name);
- err("%s: If the firmware is not running (status led not blinking)\n", serial->type->name);
- err("%s: please contact support@connecttech.com\n", serial->type->name);
+ err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
+ err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
+ err("%s: please contact support@connecttech.com\n", serial->type->description);
return -ENODEV;
no_command_private:
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index bb9819cc882..1a9679f76f5 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -2,7 +2,8 @@
# USB Storage driver configuration
#
-comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information"
+comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
+comment "may also be needed; see USB_STORAGE Help for more information"
depends on USB
config USB_STORAGE
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index 356342c6e7a..33c55a6261b 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -1,4 +1,4 @@
-/* Driver for SCM Microsystems USB-ATAPI cable
+/* Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
*
* $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $
*
@@ -67,10 +67,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
/*
- * Convenience function to produce an ATAPI read/write sectors command
+ * Convenience function to produce an ATA read/write sectors command
* Use cmd=0x20 for read, cmd=0x30 for write
*/
-static void usbat_pack_atapi_sector_cmd(unsigned char *buf,
+static void usbat_pack_ata_sector_cmd(unsigned char *buf,
unsigned char thistime,
u32 sector, unsigned char cmd)
{
@@ -196,10 +196,12 @@ static int usbat_check_status(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok)
+ /* error/check condition (0x51 is ok) */
+ if (*reply & 0x01 && *reply != 0x51)
return USB_STOR_TRANSPORT_FAILED;
- if (*reply & 0x20) // device fault
+ /* device fault */
+ if (*reply & 0x20)
return USB_STOR_TRANSPORT_FAILED;
return USB_STOR_TRANSPORT_GOOD;
@@ -222,29 +224,39 @@ static int usbat_set_shuttle_features(struct us_data *us,
command[0] = 0x40;
command[1] = USBAT_CMD_SET_FEAT;
- // The only bit relevant to ATA access is bit 6
- // which defines 8 bit data access (set) or 16 bit (unset)
+ /*
+ * The only bit relevant to ATA access is bit 6
+ * which defines 8 bit data access (set) or 16 bit (unset)
+ */
command[2] = epp_control;
- // If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
- // ET1 and ET2 define an external event to be checked for on event of a
- // _read_blocks or _write_blocks operation. The read/write will not take
- // place unless the defined trigger signal is active.
+ /*
+ * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
+ * ET1 and ET2 define an external event to be checked for on event of a
+ * _read_blocks or _write_blocks operation. The read/write will not take
+ * place unless the defined trigger signal is active.
+ */
command[3] = external_trigger;
- // The resultant byte of the mask operation (see mask_byte) is compared for
- // equivalence with this test pattern. If equal, the read/write will take
- // place.
+ /*
+ * The resultant byte of the mask operation (see mask_byte) is compared for
+ * equivalence with this test pattern. If equal, the read/write will take
+ * place.
+ */
command[4] = test_pattern;
- // This value is logically ANDed with the status register field specified
- // in the read/write command.
+ /*
+ * This value is logically ANDed with the status register field specified
+ * in the read/write command.
+ */
command[5] = mask_byte;
- // If ALQ is set in the qualifier, this field contains the address of the
- // registers where the byte count should be read for transferring the data.
- // If ALQ is not set, then this field contains the number of bytes to be
- // transferred.
+ /*
+ * If ALQ is set in the qualifier, this field contains the address of the
+ * registers where the byte count should be read for transferring the data.
+ * If ALQ is not set, then this field contains the number of bytes to be
+ * transferred.
+ */
command[6] = subcountL;
command[7] = subcountH;
@@ -273,26 +285,26 @@ static int usbat_wait_not_busy(struct us_data *us, int minutes)
if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- if (*status & 0x01) { // check condition
+ if (*status & 0x01) { /* check condition */
result = usbat_read(us, USBAT_ATA, 0x10, status);
return USB_STOR_TRANSPORT_FAILED;
}
- if (*status & 0x20) // device fault
+ if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED;
- if ((*status & 0x80)==0x00) { // not busy
+ if ((*status & 0x80)==0x00) { /* not busy */
US_DEBUGP("Waited not busy for %d steps\n", i);
return USB_STOR_TRANSPORT_GOOD;
}
if (i<500)
- msleep(10); // 5 seconds
+ msleep(10); /* 5 seconds */
else if (i<700)
- msleep(50); // 10 seconds
+ msleep(50); /* 10 seconds */
else if (i<1200)
- msleep(100); // 50 seconds
+ msleep(100); /* 50 seconds */
else
- msleep(1000); // X minutes
+ msleep(1000); /* X minutes */
}
US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
@@ -412,9 +424,12 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
if (i==0) {
cmdlen = 16;
- // Write to multiple registers
- // Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here,
- // but that's what came out of the trace every single time.
+ /*
+ * Write to multiple registers
+ * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
+ * necessary here, but that's what came out of the
+ * trace every single time.
+ */
command[0] = 0x40;
command[1] = access | USBAT_CMD_WRITE_REGS;
command[2] = 0x07;
@@ -426,7 +441,7 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
} else
cmdlen = 8;
- // Conditionally read or write blocks
+ /* Conditionally read or write blocks */
command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
command[cmdlen-7] = access |
(direction==DMA_TO_DEVICE ?
@@ -456,11 +471,6 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
}
-
- //US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n",
- // direction == DMA_TO_DEVICE ? "out" : "in",
- // len, use_sg);
-
result = usb_stor_bulk_transfer_sg(us,
pipe, content, len, use_sg, NULL);
@@ -508,9 +518,9 @@ static int usbat_hp8200e_rw_block_test(struct us_data *us,
if (result!=USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- if (*status & 0x01) // check condition
+ if (*status & 0x01) /* check condition */
return USB_STOR_TRANSPORT_FAILED;
- if (*status & 0x20) // device fault
+ if (*status & 0x20) /* device fault */
return USB_STOR_TRANSPORT_FAILED;
US_DEBUGP("Redoing %s\n",
@@ -547,32 +557,32 @@ static int usbat_multiple_write(struct us_data *us,
BUG_ON(num_registers > US_IOBUF_SIZE/2);
- // Write to multiple registers, ATA access
+ /* Write to multiple registers, ATA access */
command[0] = 0x40;
command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
- // No relevance
+ /* No relevance */
command[2] = 0;
command[3] = 0;
command[4] = 0;
command[5] = 0;
- // Number of bytes to be transferred (incl. addresses and data)
+ /* Number of bytes to be transferred (incl. addresses and data) */
command[6] = LSB_of(num_registers*2);
command[7] = MSB_of(num_registers*2);
- // The setup command
+ /* The setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Create the reg/data, reg/data sequence
+ /* Create the reg/data, reg/data sequence */
for (i=0; i<num_registers; i++) {
data[i<<1] = registers[i];
data[1+(i<<1)] = data_out[i];
}
- // Send the data
+ /* Send the data */
result = usbat_bulk_write(us, data, num_registers*2);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -606,17 +616,17 @@ static int usbat_read_blocks(struct us_data *us,
command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS;
- command[4] = 0xFD; // Timeout (ms);
+ command[4] = 0xFD; /* Timeout (ms); */
command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len);
command[7] = MSB_of(len);
- // Multiple block read setup command
+ /* Multiple block read setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- // Read the blocks we just asked for
+ /* Read the blocks we just asked for */
result = usbat_bulk_read(us, buffer, len);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -647,17 +657,17 @@ static int usbat_write_blocks(struct us_data *us,
command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
command[2] = USBAT_ATA_DATA;
command[3] = USBAT_ATA_STATUS;
- command[4] = 0xFD; // Timeout (ms)
+ command[4] = 0xFD; /* Timeout (ms) */
command[5] = USBAT_QUAL_FCQ;
command[6] = LSB_of(len);
command[7] = MSB_of(len);
- // Multiple block write setup command
+ /* Multiple block write setup command */
result = usbat_execute_command(us, command, 8);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
- // Write the data
+ /* Write the data */
result = usbat_bulk_write(us, buffer, len);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_FAILED;
@@ -711,16 +721,20 @@ static int usbat_device_reset(struct us_data *us)
{
int rc;
- // Reset peripheral, enable peripheral control signals
- // (bring reset signal up)
+ /*
+ * Reset peripheral, enable peripheral control signals
+ * (bring reset signal up)
+ */
rc = usbat_write_user_io(us,
USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Enable peripheral control signals
- // (bring reset signal down)
+ /*
+ * Enable peripheral control signals
+ * (bring reset signal down)
+ */
rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -737,7 +751,7 @@ static int usbat_device_enable_cdt(struct us_data *us)
{
int rc;
- // Enable peripheral control signals and card detect
+ /* Enable peripheral control signals and card detect */
rc = usbat_write_user_io(us,
USBAT_UIO_ACKD | USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -786,7 +800,7 @@ static int usbat_flash_check_media(struct us_data *us,
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Check for media existence
+ /* Check for media existence */
rc = usbat_flash_check_media_present(uio);
if (rc == USBAT_FLASH_MEDIA_NONE) {
info->sense_key = 0x02;
@@ -795,11 +809,11 @@ static int usbat_flash_check_media(struct us_data *us,
return USB_STOR_TRANSPORT_FAILED;
}
- // Check for media change
+ /* Check for media change */
rc = usbat_flash_check_media_changed(uio);
if (rc == USBAT_FLASH_MEDIA_CHANGED) {
- // Reset and re-enable card detect
+ /* Reset and re-enable card detect */
rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
@@ -855,15 +869,15 @@ static int usbat_identify_device(struct us_data *us,
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- // Check for error bit
- if (status & 0x01) {
- // Device is a CompactFlash reader/writer
- US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
- info->devicetype = USBAT_DEV_FLASH;
- } else {
- // Device is HP 8200
+ /* Check for error bit, or if the command 'fell through' */
+ if (status == 0xA1 || !(status & 0x01)) {
+ /* Device is HP 8200 */
US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200;
+ } else {
+ /* Device is a CompactFlash reader/writer */
+ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
+ info->devicetype = USBAT_DEV_FLASH;
}
return USB_STOR_TRANSPORT_GOOD;
@@ -916,7 +930,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
if (!reply)
return USB_STOR_TRANSPORT_ERROR;
- // ATAPI command : IDENTIFY DEVICE
+ /* ATA command : IDENTIFY DEVICE */
rc = usbat_multiple_write(us, registers, command, 3);
if (rc != USB_STOR_XFER_GOOD) {
US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
@@ -924,7 +938,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
goto leave;
}
- // Read device status
+ /* Read device status */
if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
rc = USB_STOR_TRANSPORT_ERROR;
goto leave;
@@ -932,7 +946,7 @@ static int usbat_flash_get_sector_count(struct us_data *us,
msleep(100);
- // Read the device identification data
+ /* Read the device identification data */
rc = usbat_read_block(us, reply, 512);
if (rc != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -977,19 +991,23 @@ static int usbat_flash_read_data(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- // we're working in LBA mode. according to the ATA spec,
- // we can support up to 28-bit addressing. I don't know if Jumpshot
- // supports beyond 24-bit addressing. It's kind of hard to test
- // since it requires > 8GB CF card.
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if Jumpshot
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB CF card.
+ */
if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize;
- // Since we don't read more than 64 KB at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't read more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO);
@@ -997,27 +1015,29 @@ static int usbat_flash_read_data(struct us_data *us,
return USB_STOR_TRANSPORT_ERROR;
do {
- // loop, never allocate or transfer more than 64k at once
- // (min(128k, 255*info->ssize) is the real limit)
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff;
- // ATAPI command 0x20 (READ SECTORS)
- usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20);
+ /* ATA command 0x20 (READ SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);
- // Write/execute ATAPI read command
+ /* Write/execute ATA read command */
result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
- // Read the data we just requested
+ /* Read the data we just requested */
result = usbat_read_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
US_DEBUGP("usbat_flash_read_data: %d bytes\n", len);
- // Store the data in the transfer buffer
+ /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, TO_XFER_BUF);
@@ -1061,19 +1081,23 @@ static int usbat_flash_write_data(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
- // we're working in LBA mode. according to the ATA spec,
- // we can support up to 28-bit addressing. I don't know if Jumpshot
- // supports beyond 24-bit addressing. It's kind of hard to test
- // since it requires > 8GB CF card.
+ /*
+ * we're working in LBA mode. according to the ATA spec,
+ * we can support up to 28-bit addressing. I don't know if the device
+ * supports beyond 24-bit addressing. It's kind of hard to test
+ * since it requires > 8GB media.
+ */
if (sector > 0x0FFFFFFF)
return USB_STOR_TRANSPORT_ERROR;
totallen = sectors * info->ssize;
- // Since we don't write more than 64 KB at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't write more than 64 KB at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
alloclen = min(totallen, 65536u);
buffer = kmalloc(alloclen, GFP_NOIO);
@@ -1081,24 +1105,26 @@ static int usbat_flash_write_data(struct us_data *us,
return USB_STOR_TRANSPORT_ERROR;
do {
- // loop, never allocate or transfer more than 64k at once
- // (min(128k, 255*info->ssize) is the real limit)
+ /*
+ * loop, never allocate or transfer more than 64k at once
+ * (min(128k, 255*info->ssize) is the real limit)
+ */
len = min(totallen, alloclen);
thistime = (len / info->ssize) & 0xff;
- // Get the data from the transfer buffer
+ /* Get the data from the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg_idx, &sg_offset, FROM_XFER_BUF);
- // ATAPI command 0x30 (WRITE SECTORS)
- usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30);
+ /* ATA command 0x30 (WRITE SECTORS) */
+ usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);
- // Write/execute ATAPI write command
+ /* Write/execute ATA write command */
result = usbat_multiple_write(us, registers, command, 7);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
- // Write the data
+ /* Write the data */
result = usbat_write_blocks(us, buffer, len);
if (result != USB_STOR_TRANSPORT_GOOD)
goto leave;
@@ -1169,42 +1195,44 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
srb->transfersize);
}
- // Since we only read in one block at a time, we have to create
- // a bounce buffer and move the data a piece at a time between the
- // bounce buffer and the actual transfer buffer.
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ */
len = (65535/srb->transfersize) * srb->transfersize;
US_DEBUGP("Max read is %d bytes\n", len);
len = min(len, srb->request_bufflen);
buffer = kmalloc(len, GFP_NOIO);
- if (buffer == NULL) // bloody hell!
+ if (buffer == NULL) /* bloody hell! */
return USB_STOR_TRANSPORT_FAILED;
sector = short_pack(data[7+3], data[7+2]);
sector <<= 16;
sector |= short_pack(data[7+5], data[7+4]);
transferred = 0;
- sg_segment = 0; // for keeping track of where we are in
- sg_offset = 0; // the scatter/gather list
+ sg_segment = 0; /* for keeping track of where we are in */
+ sg_offset = 0; /* the scatter/gather list */
while (transferred != srb->request_bufflen) {
if (len > srb->request_bufflen - transferred)
len = srb->request_bufflen - transferred;
- data[3] = len&0xFF; // (cylL) = expected length (L)
- data[4] = (len>>8)&0xFF; // (cylH) = expected length (H)
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
- // Fix up the SCSI command sector and num sectors
+ /* Fix up the SCSI command sector and num sectors */
- data[7+2] = MSB_of(sector>>16); // SCSI command sector
+ data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
data[7+3] = LSB_of(sector>>16);
data[7+4] = MSB_of(sector&0xFFFF);
data[7+5] = LSB_of(sector&0xFFFF);
if (data[7+0] == GPCMD_READ_CD)
data[7+6] = 0;
- data[7+7] = MSB_of(len / srb->transfersize); // SCSI command
- data[7+8] = LSB_of(len / srb->transfersize); // num sectors
+ data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
+ data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */
result = usbat_hp8200e_rw_block_test(us, USBAT_ATA,
registers, data, 19,
@@ -1217,16 +1245,16 @@ static int usbat_hp8200e_handle_read10(struct us_data *us,
if (result != USB_STOR_TRANSPORT_GOOD)
break;
- // Store the data in the transfer buffer
+ /* Store the data in the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, srb,
&sg_segment, &sg_offset, TO_XFER_BUF);
- // Update the amount transferred and the sector number
+ /* Update the amount transferred and the sector number */
transferred += len;
sector += len / srb->transfersize;
- } // while transferred != srb->request_bufflen
+ } /* while transferred != srb->request_bufflen */
kfree(buffer);
return result;
@@ -1237,7 +1265,7 @@ static int usbat_select_and_test_registers(struct us_data *us)
int selector;
unsigned char *status = us->iobuf;
- // try device = master, then device = slave.
+ /* try device = master, then device = slave. */
for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
USB_STOR_XFER_GOOD)
@@ -1298,7 +1326,7 @@ int init_usbat(struct us_data *us)
memset(us->extra, 0, sizeof(struct usbat_info));
info = (struct usbat_info *) (us->extra);
- // Enable peripheral control signals
+ /* Enable peripheral control signals */
rc = usbat_write_user_io(us,
USBAT_UIO_OE1 | USBAT_UIO_OE0,
USBAT_UIO_EPAD | USBAT_UIO_1);
@@ -1337,7 +1365,7 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 5\n");
- // Enable peripheral control signals and card detect
+ /* Enable peripheral control signals and card detect */
rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
@@ -1364,7 +1392,7 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 9\n");
- // At this point, we need to detect which device we are using
+ /* At this point, we need to detect which device we are using */
if (usbat_set_transport(us, info))
return USB_STOR_TRANSPORT_ERROR;
@@ -1414,10 +1442,10 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
data[0] = 0x00;
data[1] = 0x00;
data[2] = 0x00;
- data[3] = len&0xFF; // (cylL) = expected length (L)
- data[4] = (len>>8)&0xFF; // (cylH) = expected length (H)
- data[5] = 0xB0; // (device sel) = slave
- data[6] = 0xA0; // (command) = ATA PACKET COMMAND
+ data[3] = len&0xFF; /* (cylL) = expected length (L) */
+ data[4] = (len>>8)&0xFF; /* (cylH) = expected length (H) */
+ data[5] = 0xB0; /* (device sel) = slave */
+ data[6] = 0xA0; /* (command) = ATA PACKET COMMAND */
for (i=7; i<19; i++) {
registers[i] = 0x10;
@@ -1466,13 +1494,15 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
return result;
}
- // Write the 12-byte command header.
-
- // If the command is BLANK then set the timer for 75 minutes.
- // Otherwise set it for 10 minutes.
-
- // NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
- // AT SPEED 4 IS UNRELIABLE!!!
+ /*
+ * Write the 12-byte command header.
+ *
+ * If the command is BLANK then set the timer for 75 minutes.
+ * Otherwise set it for 10 minutes.
+ *
+ * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
+ * AT SPEED 4 IS UNRELIABLE!!!
+ */
if ( (result = usbat_write_block(us,
USBAT_ATA, srb->cmnd, 12,
@@ -1481,19 +1511,18 @@ static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
return result;
}
- // If there is response data to be read in
- // then do it here.
+ /* If there is response data to be read in then do it here. */
if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
- // How many bytes to read in? Check cylL register
+ /* How many bytes to read in? Check cylL register */
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) !=
USB_STOR_XFER_GOOD) {
return USB_STOR_TRANSPORT_ERROR;
}
- if (len > 0xFF) { // need to read cylH also
+ if (len > 0xFF) { /* need to read cylH also */
len = *status;
if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
USB_STOR_XFER_GOOD) {
@@ -1556,13 +1585,16 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec
+ /* hard coded 512 byte sectors as per ATA spec */
+ info->ssize = 0x200;
US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
info->sectors, info->ssize);
- // build the reply
- // note: must return the sector number of the last sector,
- // *not* the total number of sectors
+ /*
+ * build the reply
+ * note: must return the sector number of the last sector,
+ * *not* the total number of sectors
+ */
((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
usb_stor_set_xfer_buf(ptr, 8, srb);
@@ -1586,7 +1618,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
}
if (srb->cmnd[0] == READ_12) {
- // I don't think we'll ever see a READ_12 but support it anyway...
+ /*
+ * I don't think we'll ever see a READ_12 but support it anyway
+ */
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1608,7 +1642,9 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
}
if (srb->cmnd[0] == WRITE_12) {
- // I don't think we'll ever see a WRITE_12 but support it anyway...
+ /*
+ * I don't think we'll ever see a WRITE_12 but support it anyway
+ */
block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5]));
@@ -1645,8 +1681,10 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
- // sure. whatever. not like we can stop the user from popping
- // the media out of the device (no locking doors, etc)
+ /*
+ * sure. whatever. not like we can stop the user from popping
+ * the media out of the device (no locking doors, etc)
+ */
return USB_STOR_TRANSPORT_GOOD;
}
diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h
index 5b8e867e2ae..25e7d8b340b 100644
--- a/drivers/usb/storage/shuttle_usbat.h
+++ b/drivers/usb/storage/shuttle_usbat.h
@@ -55,8 +55,8 @@
#define USBAT_UIO_WRITE 0
/* Qualifier bits */
-#define USBAT_QUAL_FCQ 0x20 // full compare
-#define USBAT_QUAL_ALQ 0x10 // auto load subcount
+#define USBAT_QUAL_FCQ 0x20 /* full compare */
+#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */
/* USBAT Flash Media status types */
#define USBAT_FLASH_MEDIA_NONE 0
@@ -67,39 +67,39 @@
#define USBAT_FLASH_MEDIA_CHANGED 1
/* USBAT ATA registers */
-#define USBAT_ATA_DATA 0x10 // read/write data (R/W)
-#define USBAT_ATA_FEATURES 0x11 // set features (W)
-#define USBAT_ATA_ERROR 0x11 // error (R)
-#define USBAT_ATA_SECCNT 0x12 // sector count (R/W)
-#define USBAT_ATA_SECNUM 0x13 // sector number (R/W)
-#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W)
-#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W)
-#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W)
-#define USBAT_ATA_STATUS 0x17 // device status (R)
-#define USBAT_ATA_CMD 0x17 // device command (W)
-#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R)
+#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */
+#define USBAT_ATA_FEATURES 0x11 /* set features (W) */
+#define USBAT_ATA_ERROR 0x11 /* error (R) */
+#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */
+#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */
+#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */
+#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */
+#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */
+#define USBAT_ATA_STATUS 0x17 /* device status (R) */
+#define USBAT_ATA_CMD 0x17 /* device command (W) */
+#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */
/* USBAT User I/O Data registers */
-#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals
-#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only)
- // CDT = ACKD & !UI1 & !UI0
-#define USBAT_UIO_1 0x20 // I/O 1
-#define USBAT_UIO_0 0x10 // I/O 0
-#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode
-#define USBAT_UIO_UI1 0x04 // Input 1
-#define USBAT_UIO_UI0 0x02 // Input 0
-#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP)
+#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */
+#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */
+ /* CDT = ACKD & !UI1 & !UI0 */
+#define USBAT_UIO_1 0x20 /* I/O 1 */
+#define USBAT_UIO_0 0x10 /* I/O 0 */
+#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */
+#define USBAT_UIO_UI1 0x04 /* Input 1 */
+#define USBAT_UIO_UI0 0x02 /* Input 0 */
+#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */
/* USBAT User I/O Enable registers */
-#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral
-#define USBAT_UIO_ACKD 0x40 // Enable Card Detect
-#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input
- // If ACKD=1, set OE1 to 1 also.
-#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input
-#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip
+#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */
+#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */
+#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */
+ /* If ACKD=1, set OE1 to 1 also. */
+#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */
+#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */
/* USBAT Features */
-#define USBAT_FEAT_ETEN 0x80 // External trigger enable
+#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */
#define USBAT_FEAT_U1 0x08
#define USBAT_FEAT_U0 0x04
#define USBAT_FEAT_ET1 0x02
@@ -112,12 +112,12 @@ struct usbat_info {
int devicetype;
/* Used for Flash readers only */
- unsigned long sectors; // total sector count
- unsigned long ssize; // sector size in bytes
+ unsigned long sectors; /* total sector count */
+ unsigned long ssize; /* sector size in bytes */
unsigned char sense_key;
- unsigned long sense_asc; // additional sense code
- unsigned long sense_ascq; // additional sense code qualifier
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
};
#endif
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index c1ba5301ebf..7ca896a342e 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -636,11 +636,11 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
/* use the new buffer we have */
old_request_buffer = srb->request_buffer;
- srb->request_buffer = srb->sense_buffer;
+ srb->request_buffer = us->sensebuf;
/* set the buffer length for transfer */
old_request_bufflen = srb->request_bufflen;
- srb->request_bufflen = 18;
+ srb->request_bufflen = US_SENSE_SIZE;
/* set up for no scatter-gather use */
old_sg = srb->use_sg;
@@ -652,6 +652,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
temp_result = us->transport(us->srb, us);
/* let's clean up right away */
+ memcpy(srb->sense_buffer, us->sensebuf, US_SENSE_SIZE);
srb->resid = old_resid;
srb->request_buffer = old_request_buffer;
srb->request_bufflen = old_request_bufflen;
@@ -923,6 +924,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us)
int result;
/* issue the command */
+ us->iobuf[0] = 0;
result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
US_BULK_GET_MAX_LUN,
USB_DIR_IN | USB_TYPE_CLASS |
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 8d9e0663f8f..0a362cc781a 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -50,7 +50,7 @@
#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define US_PR_BULK 0x50 /* bulk only */
#ifdef CONFIG_USB_STORAGE_USBAT
-#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */
+#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR09
#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index b79dad1b598..9e926a8f211 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -71,12 +71,12 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200,
UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001,
"HP",
"CD-Writer+ 8200e",
- US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat, 0),
UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001,
"HP",
"CD-Writer+ CD-4e",
- US_SC_8070, US_PR_SCM_ATAPI, init_usbat, 0),
+ US_SC_8070, US_PR_USBAT, init_usbat, 0),
#endif
/* Patch submitted by Mihnea-Costin Grigore <mihnea@zulu.ro> */
@@ -106,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Reported by Stefan Werner <dustbln@gmx.de> */
+UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100,
+ "TrekStor",
+ "i.Beat Joy 2.0",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE ),
+
/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */
UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210,
"SMSC",
@@ -244,6 +251,13 @@ UNUSUAL_DEV( 0x04da, 0x2372, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+/* Reported by Simeon Simeonov <simeonov_2000@yahoo.com> */
+UNUSUAL_DEV( 0x04da, 0x2373, 0x0000, 0x9999,
+ "LEICA",
+ "D-LUX Camera",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY | US_FL_NOT_LOCKABLE ),
+
/* Most of the following entries were developed with the help of
* Shuttle/SCM directly.
*/
@@ -333,9 +347,9 @@ UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
#ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
- "SCM",
- "SCM USBAT-02",
- US_SC_SCSI, US_PR_SCM_ATAPI, init_usbat,
+ "Shuttle/SCM",
+ "USBAT-02",
+ US_SC_SCSI, US_PR_USBAT, init_usbat,
US_FL_SINGLE_LUN),
#endif
@@ -598,6 +612,16 @@ UNUSUAL_DEV( 0x05ac, 0x1205, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/*
+ * Reported by Tyson Vinson <lornoss@gmail.com>
+ * This particular productId is the iPod Nano
+ */
+UNUSUAL_DEV( 0x05ac, 0x120a, 0x0000, 0x9999,
+ "Apple",
+ "iPod",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
"Lexar",
@@ -702,6 +726,14 @@ UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
+#ifdef CONFIG_USB_STORAGE_USBAT
+UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005,
+ "Sandisk",
+ "ImageMate SDDR-05b",
+ US_SC_SCSI, US_PR_USBAT, init_usbat,
+ US_FL_SINGLE_LUN ),
+#endif
+
UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100,
"Sandisk",
"ImageMate SDDR-12",
@@ -724,7 +756,7 @@ UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999,
#endif
/* Reported by Eero Volotinen <eero@ping-viini.org> */
-UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0406, 0x0406,
+UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999,
"Freecom Technologies",
"FHD-Classic",
US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index f9a9bfa1aef..3847ebed2aa 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -54,6 +54,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/kthread.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -111,11 +112,6 @@ static atomic_t total_threads = ATOMIC_INIT(0);
static DECLARE_COMPLETION(threads_gone);
-static int storage_probe(struct usb_interface *iface,
- const struct usb_device_id *id);
-
-static void storage_disconnect(struct usb_interface *iface);
-
/* The entries in this table, except for final ones here
* (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
* line for line with the entries of us_unsuaul_dev_list[].
@@ -233,13 +229,40 @@ static struct us_unusual_dev us_unusual_dev_list[] = {
{ NULL }
};
-static struct usb_driver usb_storage_driver = {
- .owner = THIS_MODULE,
- .name = "usb-storage",
- .probe = storage_probe,
- .disconnect = storage_disconnect,
- .id_table = storage_usb_ids,
-};
+
+#ifdef CONFIG_PM /* Minimal support for suspend and resume */
+
+static int storage_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ /* Wait until no command is running */
+ down(&us->dev_semaphore);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+ iface->dev.power.power_state.event = message.event;
+
+ /* When runtime PM is working, we'll set a flag to indicate
+ * whether we should autoresume when a SCSI request arrives. */
+
+ up(&us->dev_semaphore);
+ return 0;
+}
+
+static int storage_resume(struct usb_interface *iface)
+{
+ struct us_data *us = usb_get_intfdata(iface);
+
+ down(&us->dev_semaphore);
+
+ US_DEBUGP("%s\n", __FUNCTION__);
+ iface->dev.power.power_state.event = PM_EVENT_ON;
+
+ up(&us->dev_semaphore);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
/*
* fill_inquiry_response takes an unsigned char array (which must
@@ -288,22 +311,7 @@ static int usb_stor_control_thread(void * __us)
struct us_data *us = (struct us_data *)__us;
struct Scsi_Host *host = us_to_host(us);
- lock_kernel();
-
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources.
- */
- daemonize("usb-storage");
current->flags |= PF_NOFREEZE;
- unlock_kernel();
-
- /* acquire a reference to the host, so it won't be deallocated
- * until we're ready to exit */
- scsi_host_get(host);
-
- /* signal that we've started the thread */
- complete(&(us->notify));
for(;;) {
US_DEBUGP("*** thread sleeping.\n");
@@ -467,6 +475,12 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf)
US_DEBUGP("I/O buffer allocation failed\n");
return -ENOMEM;
}
+
+ us->sensebuf = kmalloc(US_SENSE_SIZE, GFP_KERNEL);
+ if (!us->sensebuf) {
+ US_DEBUGP("Sense buffer allocation failed\n");
+ return -ENOMEM;
+ }
return 0;
}
@@ -555,8 +569,8 @@ static int get_transport(struct us_data *us)
break;
#ifdef CONFIG_USB_STORAGE_USBAT
- case US_PR_SCM_ATAPI:
- us->transport_name = "SCM/ATAPI";
+ case US_PR_USBAT:
+ us->transport_name = "Shuttle USBAT";
us->transport = usbat_transport;
us->transport_reset = usb_stor_CB_reset;
us->max_lun = 1;
@@ -740,6 +754,7 @@ static int get_pipes(struct us_data *us)
static int usb_stor_acquire_resources(struct us_data *us)
{
int p;
+ struct task_struct *th;
us->current_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!us->current_urb) {
@@ -747,38 +762,28 @@ static int usb_stor_acquire_resources(struct us_data *us)
return -ENOMEM;
}
- /* Lock the device while we carry out the next two operations */
- down(&us->dev_semaphore);
-
- /* For bulk-only devices, determine the max LUN value */
- if (us->protocol == US_PR_BULK) {
- p = usb_stor_Bulk_max_lun(us);
- if (p < 0) {
- up(&us->dev_semaphore);
- return p;
- }
- us->max_lun = p;
- }
-
/* Just before we start our control thread, initialize
* the device if it needs initialization */
- if (us->unusual_dev->initFunction)
- us->unusual_dev->initFunction(us);
-
- up(&us->dev_semaphore);
+ if (us->unusual_dev->initFunction) {
+ p = us->unusual_dev->initFunction(us);
+ if (p)
+ return p;
+ }
/* Start up our control thread */
- p = kernel_thread(usb_stor_control_thread, us, CLONE_VM);
- if (p < 0) {
+ th = kthread_create(usb_stor_control_thread, us, "usb-storage");
+ if (IS_ERR(th)) {
printk(KERN_WARNING USB_STORAGE
"Unable to start control thread\n");
- return p;
+ return PTR_ERR(th);
}
- us->pid = p;
- atomic_inc(&total_threads);
- /* Wait for the thread to start */
- wait_for_completion(&(us->notify));
+ /* Take a reference to the host for the control thread and
+ * count it among all the threads we have launched. Then
+ * start it up. */
+ scsi_host_get(us_to_host(us));
+ atomic_inc(&total_threads);
+ wake_up_process(th);
return 0;
}
@@ -812,6 +817,8 @@ static void dissociate_dev(struct us_data *us)
{
US_DEBUGP("-- %s\n", __FUNCTION__);
+ kfree(us->sensebuf);
+
/* Free the device-related DMA-mapped buffers */
if (us->cr)
usb_buffer_free(us->pusb_dev, sizeof(*us->cr), us->cr,
@@ -872,21 +879,6 @@ static int usb_stor_scan_thread(void * __us)
{
struct us_data *us = (struct us_data *)__us;
- /*
- * This thread doesn't need any user-level access,
- * so get rid of all our resources.
- */
- lock_kernel();
- daemonize("usb-stor-scan");
- unlock_kernel();
-
- /* Acquire a reference to the host, so it won't be deallocated
- * until we're ready to exit */
- scsi_host_get(us_to_host(us));
-
- /* Signal that we've started the thread */
- complete(&(us->notify));
-
printk(KERN_DEBUG
"usb-storage: device found at %d\n", us->pusb_dev->devnum);
@@ -904,6 +896,14 @@ retry:
/* If the device is still connected, perform the scanning */
if (!test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
+
+ /* For bulk-only devices, determine the max LUN value */
+ if (us->protocol == US_PR_BULK &&
+ !(us->flags & US_FL_SINGLE_LUN)) {
+ down(&us->dev_semaphore);
+ us->max_lun = usb_stor_Bulk_max_lun(us);
+ up(&us->dev_semaphore);
+ }
scsi_scan_host(us_to_host(us));
printk(KERN_DEBUG "usb-storage: device scan complete\n");
@@ -923,6 +923,7 @@ static int storage_probe(struct usb_interface *intf,
struct us_data *us;
const int id_index = id - storage_usb_ids;
int result;
+ struct task_struct *th;
US_DEBUGP("USB Mass Storage device detected\n");
@@ -1003,17 +1004,21 @@ static int storage_probe(struct usb_interface *intf,
}
/* Start up the thread for delayed SCSI-device scanning */
- result = kernel_thread(usb_stor_scan_thread, us, CLONE_VM);
- if (result < 0) {
+ th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
+ if (IS_ERR(th)) {
printk(KERN_WARNING USB_STORAGE
"Unable to start the device-scanning thread\n");
quiesce_and_remove_host(us);
+ result = PTR_ERR(th);
goto BadDevice;
}
- atomic_inc(&total_threads);
- /* Wait for the thread to start */
- wait_for_completion(&(us->notify));
+ /* Take a reference to the host for the scanning thread and
+ * count it among all the threads we have launched. Then
+ * start it up. */
+ scsi_host_get(us_to_host(us));
+ atomic_inc(&total_threads);
+ wake_up_process(th);
return 0;
@@ -1038,6 +1043,18 @@ static void storage_disconnect(struct usb_interface *intf)
* Initialization and registration
***********************************************************************/
+static struct usb_driver usb_storage_driver = {
+ .owner = THIS_MODULE,
+ .name = "usb-storage",
+ .probe = storage_probe,
+ .disconnect = storage_disconnect,
+#ifdef CONFIG_PM
+ .suspend = storage_suspend,
+ .resume = storage_resume,
+#endif
+ .id_table = storage_usb_ids,
+};
+
static int __init usb_stor_init(void)
{
int retval;
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index a195adae57b..98b09711a73 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -117,6 +117,7 @@ enum { US_DO_ALL_FLAGS };
*/
#define US_IOBUF_SIZE 64 /* Size of the DMA-mapped I/O buffer */
+#define US_SENSE_SIZE 18 /* Size of the autosense data buffer */
typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
typedef int (*trans_reset)(struct us_data*);
@@ -160,14 +161,12 @@ struct us_data {
struct scsi_cmnd *srb; /* current srb */
unsigned int tag; /* current dCBWTag */
- /* thread information */
- int pid; /* control thread */
-
/* control and bulk communications data */
struct urb *current_urb; /* USB requests */
struct usb_ctrlrequest *cr; /* control requests */
struct usb_sg_request current_sg; /* scatter-gather req. */
unsigned char *iobuf; /* I/O buffer */
+ unsigned char *sensebuf; /* sense data buffer */
dma_addr_t cr_dma; /* buffer DMA addresses */
dma_addr_t iobuf_dma;
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 353f24d45bc..6c3a53f8f26 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -223,9 +223,8 @@ static struct file_operations skel_fops = {
* and to have the device registered with devfs and the driver core
*/
static struct usb_class_driver skel_class = {
- .name = "usb/skel%d",
+ .name = "skel%d",
.fops = &skel_fops,
- .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
.minor_base = USB_SKEL_MINOR_BASE,
};