[SCSI] lpfc 8.3.0 : Add BlockGuard support (T10-DIF) structs and defs

Update struct definitions, #defines, sysfs entries, and initialization
to support BlockGuard.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 116 insertions, 3 deletions

diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 7c015982b40..9ec04600130 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -96,6 +96,58 @@ lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr,
 	return snprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n");
 }
 
+static ssize_t
+lpfc_bg_info_show(struct device *dev, struct device_attribute *attr,
+		  char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	if (phba->cfg_enable_bg)
+		if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
+			return snprintf(buf, PAGE_SIZE, "BlockGuard Enabled\n");
+		else
+			return snprintf(buf, PAGE_SIZE,
+					"BlockGuard Not Supported\n");
+	else
+			return snprintf(buf, PAGE_SIZE,
+					"BlockGuard Disabled\n");
+}
+
+static ssize_t
+lpfc_bg_guard_err_show(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	return snprintf(buf, PAGE_SIZE, "%llu\n", phba->bg_guard_err_cnt);
+}
+
+static ssize_t
+lpfc_bg_apptag_err_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	return snprintf(buf, PAGE_SIZE, "%llu\n", phba->bg_apptag_err_cnt);
+}
+
+static ssize_t
+lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	return snprintf(buf, PAGE_SIZE, "%llu\n", phba->bg_reftag_err_cnt);
+}
+
 /**
  * lpfc_info_show: Return some pci info about the host in ascii.
  * @dev: class converted to a Scsi_host structure.
@@ -1485,6 +1537,10 @@ lpfc_vport_param_store(name)\
 static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
 		   lpfc_##name##_show, lpfc_##name##_store)
 
+static DEVICE_ATTR(bg_info, S_IRUGO, lpfc_bg_info_show, NULL);
+static DEVICE_ATTR(bg_guard_err, S_IRUGO, lpfc_bg_guard_err_show, NULL);
+static DEVICE_ATTR(bg_apptag_err, S_IRUGO, lpfc_bg_apptag_err_show, NULL);
+static DEVICE_ATTR(bg_reftag_err, S_IRUGO, lpfc_bg_reftag_err_show, NULL);
 static DEVICE_ATTR(info, S_IRUGO, lpfc_info_show, NULL);
 static DEVICE_ATTR(serialnum, S_IRUGO, lpfc_serialnum_show, NULL);
 static DEVICE_ATTR(modeldesc, S_IRUGO, lpfc_modeldesc_show, NULL);
@@ -1970,6 +2026,7 @@ static DEVICE_ATTR(lpfc_devloss_tmo, S_IRUGO | S_IWUSR,
 # LOG_LINK_EVENT                0x10       Link events
 # LOG_FCP                       0x40       FCP traffic history
 # LOG_NODE                      0x80       Node table events
+# LOG_BG                        0x200      BlockBuard events
 # LOG_MISC                      0x400      Miscellaneous events
 # LOG_SLI                       0x800      SLI events
 # LOG_FCP_ERROR                 0x1000     Only log FCP errors
@@ -2769,6 +2826,42 @@ LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver.");
 LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
 
 /*
+# lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)
+#       0  = BlockGuard disabled (default)
+#       1  = BlockGuard enabled
+# Value range is [0,1]. Default value is 0.
+*/
+LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
+
+
+/*
+# lpfc_prot_mask: i
+#	- Bit mask of host protection capabilities used to register with the
+#	  SCSI mid-layer
+# 	- Only meaningful if BG is turned on (lpfc_enable_bg=1).
+#	- Allows you to ultimately specify which profiles to use
+#	- Default will result in registering capabilities for all profiles.
+#
+*/
+unsigned int lpfc_prot_mask =   SHOST_DIX_TYPE0_PROTECTION;
+
+module_param(lpfc_prot_mask, uint, 0);
+MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
+
+/*
+# lpfc_prot_guard: i
+#	- Bit mask of protection guard types to register with the SCSI mid-layer
+# 	- Guard types are currently either 1) IP checksum 2) T10-DIF CRC
+#	- Allows you to ultimately specify which profiles to use
+#	- Default will result in registering capabilities for all guard types
+#
+*/
+unsigned char lpfc_prot_guard = SHOST_DIX_GUARD_IP;
+module_param(lpfc_prot_guard, byte, 0);
+MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type");
+
+
+/*
  * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
  * This value can be set to values between 64 and 256. The default value is
  * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
@@ -2777,7 +2870,15 @@ LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
 LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT,
 	    LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count");
 
+LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_PROT_SG_SEG_CNT,
+		LPFC_DEFAULT_PROT_SG_SEG_CNT, LPFC_MAX_PROT_SG_SEG_CNT,
+		"Max Protection Scatter Gather Segment Count");
+
 struct device_attribute *lpfc_hba_attrs[] = {
+	&dev_attr_bg_info,
+	&dev_attr_bg_guard_err,
+	&dev_attr_bg_apptag_err,
+	&dev_attr_bg_reftag_err,
 	&dev_attr_info,
 	&dev_attr_serialnum,
 	&dev_attr_modeldesc,
@@ -2825,6 +2926,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_poll,
 	&dev_attr_lpfc_poll_tmo,
 	&dev_attr_lpfc_use_msi,
+	&dev_attr_lpfc_enable_bg,
 	&dev_attr_lpfc_soft_wwnn,
 	&dev_attr_lpfc_soft_wwpn,
 	&dev_attr_lpfc_soft_wwn_enable,
@@ -2833,6 +2935,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_sg_seg_cnt,
 	&dev_attr_lpfc_max_scsicmpl_time,
 	&dev_attr_lpfc_stat_data_ctrl,
+	&dev_attr_lpfc_prot_sg_seg_cnt,
 	NULL,
 };
 
@@ -3961,13 +4064,12 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_use_msi_init(phba, lpfc_use_msi);
 	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
 	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
+	lpfc_enable_bg_init(phba, lpfc_enable_bg);
 	phba->cfg_poll = lpfc_poll;
 	phba->cfg_soft_wwnn = 0L;
 	phba->cfg_soft_wwpn = 0L;
 	lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
-	/* Also reinitialize the host templates with new values. */
-	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+	lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt);
 	/*
 	 * Since the sg_tablesize is module parameter, the sg_dma_buf_size
 	 * used to create the sg_dma_buf_pool must be dynamically calculated.
@@ -3976,6 +4078,17 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
 			sizeof(struct fcp_rsp) +
 			((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+	if (phba->cfg_enable_bg) {
+		phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+		phba->cfg_sg_dma_buf_size +=
+			phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
+	}
+
+	/* Also reinitialize the host templates with new values. */
+	lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+	lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
 	lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
 	return;
 }