Merge branch 'linus' into x86/spinlocks

Done to prevent this failure of an Octopus merge:

 Added arch/arm/include/asm/byteorder.h in both, but differently.
 ERROR: Merge conflict in arch/arm/include/asm/byteorder.h
 Auto-merging include/asm-x86/spinlock.h
 ERROR: Merge conflict in include/asm-x86/spinlock.h
 fatal: merge program failed

1 files changed, 15 insertions, 413 deletions

diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 98df9bc7836..67b26d3c3cd 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -25,7 +25,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/firmware.h>
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -34,9 +33,6 @@
 
 #include "orinoco.h"
 
-static const char primary_fw_name[] = "symbol_sp24t_prim_fw";
-static const char secondary_fw_name[] = "symbol_sp24t_sec_fw";
-
 /********************************************************************/
 /* Module stuff							    */
 /********************************************************************/
@@ -71,161 +67,11 @@ struct orinoco_pccard {
 static int spectrum_cs_config(struct pcmcia_device *link);
 static void spectrum_cs_release(struct pcmcia_device *link);
 
-/********************************************************************/
-/* Firmware downloader						    */
-/********************************************************************/
-
-/* Position of PDA in the adapter memory */
-#define EEPROM_ADDR	0x3000
-#define EEPROM_LEN	0x200
-#define PDA_OFFSET	0x100
-
-#define PDA_ADDR	(EEPROM_ADDR + PDA_OFFSET)
-#define PDA_WORDS	((EEPROM_LEN - PDA_OFFSET) / 2)
-
 /* Constants for the CISREG_CCSR register */
 #define HCR_RUN		0x07	/* run firmware after reset */
 #define HCR_IDLE	0x0E	/* don't run firmware after reset */
 #define HCR_MEM16	0x10	/* memory width bit, should be preserved */
 
-/*
- * AUX port access.  To unlock the AUX port write the access keys to the
- * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL
- * register.  Then read it and make sure it's HERMES_AUX_ENABLED.
- */
-#define HERMES_AUX_ENABLE	0x8000	/* Enable auxiliary port access */
-#define HERMES_AUX_DISABLE	0x4000	/* Disable to auxiliary port access */
-#define HERMES_AUX_ENABLED	0xC000	/* Auxiliary port is open */
-
-#define HERMES_AUX_PW0	0xFE01
-#define HERMES_AUX_PW1	0xDC23
-#define HERMES_AUX_PW2	0xBA45
-
-/* End markers */
-#define PDI_END		0x00000000	/* End of PDA */
-#define BLOCK_END	0xFFFFFFFF	/* Last image block */
-#define TEXT_END	0x1A		/* End of text header */
-
-/*
- * The following structures have little-endian fields denoted by
- * the leading underscore.  Don't access them directly - use inline
- * functions defined below.
- */
-
-/*
- * The binary image to be downloaded consists of series of data blocks.
- * Each block has the following structure.
- */
-struct dblock {
-	__le32 addr;		/* adapter address where to write the block */
-	__le16 len;		/* length of the data only, in bytes */
-	char data[0];		/* data to be written */
-} __attribute__ ((packed));
-
-/*
- * Plug Data References are located in in the image after the last data
- * block.  They refer to areas in the adapter memory where the plug data
- * items with matching ID should be written.
- */
-struct pdr {
-	__le32 id;		/* record ID */
-	__le32 addr;		/* adapter address where to write the data */
-	__le32 len;		/* expected length of the data, in bytes */
-	char next[0];		/* next PDR starts here */
-} __attribute__ ((packed));
-
-
-/*
- * Plug Data Items are located in the EEPROM read from the adapter by
- * primary firmware.  They refer to the device-specific data that should
- * be plugged into the secondary firmware.
- */
-struct pdi {
-	__le16 len;		/* length of ID and data, in words */
-	__le16 id;		/* record ID */
-	char data[0];		/* plug data */
-} __attribute__ ((packed));
-
-
-/* Functions for access to little-endian data */
-static inline u32
-dblock_addr(const struct dblock *blk)
-{
-	return le32_to_cpu(blk->addr);
-}
-
-static inline u32
-dblock_len(const struct dblock *blk)
-{
-	return le16_to_cpu(blk->len);
-}
-
-static inline u32
-pdr_id(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->id);
-}
-
-static inline u32
-pdr_addr(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->addr);
-}
-
-static inline u32
-pdr_len(const struct pdr *pdr)
-{
-	return le32_to_cpu(pdr->len);
-}
-
-static inline u32
-pdi_id(const struct pdi *pdi)
-{
-	return le16_to_cpu(pdi->id);
-}
-
-/* Return length of the data only, in bytes */
-static inline u32
-pdi_len(const struct pdi *pdi)
-{
-	return 2 * (le16_to_cpu(pdi->len) - 1);
-}
-
-
-/* Set address of the auxiliary port */
-static inline void
-spectrum_aux_setaddr(hermes_t *hw, u32 addr)
-{
-	hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7));
-	hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F));
-}
-
-
-/* Open access to the auxiliary port */
-static int
-spectrum_aux_open(hermes_t *hw)
-{
-	int i;
-
-	/* Already open? */
-	if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED)
-		return 0;
-
-	hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0);
-	hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1);
-	hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2);
-	hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE);
-
-	for (i = 0; i < 20; i++) {
-		udelay(10);
-		if (hermes_read_reg(hw, HERMES_CONTROL) ==
-		    HERMES_AUX_ENABLED)
-			return 0;
-	}
-
-	return -EBUSY;
-}
-
 
 #define CS_CHECK(fn, ret) \
   do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
@@ -292,275 +138,29 @@ spectrum_reset(struct pcmcia_device *link, int idle)
 	return -ENODEV;
 }
 
+/********************************************************************/
+/* Device methods     						    */
+/********************************************************************/
 
-/*
- * Scan PDR for the record with the specified RECORD_ID.
- * If it's not found, return NULL.
- */
-static struct pdr *
-spectrum_find_pdr(struct pdr *first_pdr, u32 record_id)
-{
-	struct pdr *pdr = first_pdr;
-
-	while (pdr_id(pdr) != PDI_END) {
-		/*
-		 * PDR area is currently not terminated by PDI_END.
-		 * It's followed by CRC records, which have the type
-		 * field where PDR has length.  The type can be 0 or 1.
-		 */
-		if (pdr_len(pdr) < 2)
-			return NULL;
-
-		/* If the record ID matches, we are done */
-		if (pdr_id(pdr) == record_id)
-			return pdr;
-
-		pdr = (struct pdr *) pdr->next;
-	}
-	return NULL;
-}
-
-
-/* Process one Plug Data Item - find corresponding PDR and plug it */
-static int
-spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi)
-{
-	struct pdr *pdr;
-
-	/* Find the PDI corresponding to this PDR */
-	pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi));
-
-	/* No match is found, safe to ignore */
-	if (!pdr)
-		return 0;
-
-	/* Lengths of the data in PDI and PDR must match */
-	if (pdi_len(pdi) != pdr_len(pdr))
-		return -EINVAL;
-
-	/* do the actual plugging */
-	spectrum_aux_setaddr(hw, pdr_addr(pdr));
-	hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi));
-
-	return 0;
-}
-
-
-/* Read PDA from the adapter */
-static int
-spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len)
-{
-	int ret;
-	int pda_size;
-
-	/* Issue command to read EEPROM */
-	ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL);
-	if (ret)
-		return ret;
-
-	/* Open auxiliary port */
-	ret = spectrum_aux_open(hw);
-	if (ret)
-		return ret;
-
-	/* read PDA from EEPROM */
-	spectrum_aux_setaddr(hw, PDA_ADDR);
-	hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2);
-
-	/* Check PDA length */
-	pda_size = le16_to_cpu(pda[0]);
-	if (pda_size > pda_len)
-		return -EINVAL;
-
-	return 0;
-}
-
-
-/* Parse PDA and write the records into the adapter */
-static int
-spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block,
-		   __le16 *pda)
-{
-	int ret;
-	struct pdi *pdi;
-	struct pdr *first_pdr;
-	const struct dblock *blk = first_block;
-
-	/* Skip all blocks to locate Plug Data References */
-	while (dblock_addr(blk) != BLOCK_END)
-		blk = (struct dblock *) &blk->data[dblock_len(blk)];
-
-	first_pdr = (struct pdr *) blk;
-
-	/* Go through every PDI and plug them into the adapter */
-	pdi = (struct pdi *) (pda + 2);
-	while (pdi_id(pdi) != PDI_END) {
-		ret = spectrum_plug_pdi(hw, first_pdr, pdi);
-		if (ret)
-			return ret;
-
-		/* Increment to the next PDI */
-		pdi = (struct pdi *) &pdi->data[pdi_len(pdi)];
-	}
-	return 0;
-}
-
-
-/* Load firmware blocks into the adapter */
-static int
-spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block)
-{
-	const struct dblock *blk;
-	u32 blkaddr;
-	u32 blklen;
-
-	blk = first_block;
-	blkaddr = dblock_addr(blk);
-	blklen = dblock_len(blk);
-
-	while (dblock_addr(blk) != BLOCK_END) {
-		spectrum_aux_setaddr(hw, blkaddr);
-		hermes_write_bytes(hw, HERMES_AUXDATA, blk->data,
-				   blklen);
-
-		blk = (struct dblock *) &blk->data[blklen];
-		blkaddr = dblock_addr(blk);
-		blklen = dblock_len(blk);
-	}
-	return 0;
-}
-
-
-/*
- * Process a firmware image - stop the card, load the firmware, reset
- * the card and make sure it responds.  For the secondary firmware take
- * care of the PDA - read it and then write it on top of the firmware.
- */
 static int
-spectrum_dl_image(hermes_t *hw, struct pcmcia_device *link,
-		  const unsigned char *image, int secondary)
+spectrum_cs_hard_reset(struct orinoco_private *priv)
 {
-	int ret;
-	const unsigned char *ptr;
-	const struct dblock *first_block;
-
-	/* Plug Data Area (PDA) */
-	__le16 pda[PDA_WORDS];
-
-	/* Binary block begins after the 0x1A marker */
-	ptr = image;
-	while (*ptr++ != TEXT_END);
-	first_block = (const struct dblock *) ptr;
-
-	/* Read the PDA */
-	if (secondary) {
-		ret = spectrum_read_pda(hw, pda, sizeof(pda));
-		if (ret)
-			return ret;
-	}
-
-	/* Stop the firmware, so that it can be safely rewritten */
-	ret = spectrum_reset(link, 1);
-	if (ret)
-		return ret;
-
-	/* Program the adapter with new firmware */
-	ret = spectrum_load_blocks(hw, first_block);
-	if (ret)
-		return ret;
-
-	/* Write the PDA to the adapter */
-	if (secondary) {
-		ret = spectrum_apply_pda(hw, first_block, pda);
-		if (ret)
-			return ret;
-	}
-
-	/* Run the firmware */
-	ret = spectrum_reset(link, 0);
-	if (ret)
-		return ret;
-
-	/* Reset hermes chip and make sure it responds */
-	ret = hermes_init(hw);
-
-	/* hermes_reset() should return 0 with the secondary firmware */
-	if (secondary && ret != 0)
-		return -ENODEV;
+	struct orinoco_pccard *card = priv->card;
+	struct pcmcia_device *link = card->p_dev;
 
-	/* And this should work with any firmware */
-	if (!hermes_present(hw))
-		return -ENODEV;
+	/* Soft reset using COR and HCR */
+	spectrum_reset(link, 0);
 
 	return 0;
 }
 
-
-/*
- * Download the firmware into the card, this also does a PCMCIA soft
- * reset on the card, to make sure it's in a sane state.
- */
 static int
-spectrum_dl_firmware(hermes_t *hw, struct pcmcia_device *link)
-{
-	int ret;
-	const struct firmware *fw_entry;
-
-	if (request_firmware(&fw_entry, primary_fw_name,
-			     &handle_to_dev(link)) != 0) {
-		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
-		       primary_fw_name);
-		return -ENOENT;
-	}
-
-	/* Load primary firmware */
-	ret = spectrum_dl_image(hw, link, fw_entry->data, 0);
-	release_firmware(fw_entry);
-	if (ret) {
-		printk(KERN_ERR PFX "Primary firmware download failed\n");
-		return ret;
-	}
-
-	if (request_firmware(&fw_entry, secondary_fw_name,
-			     &handle_to_dev(link)) != 0) {
-		printk(KERN_ERR PFX "Cannot find firmware: %s\n",
-		       secondary_fw_name);
-		return -ENOENT;
-	}
-
-	/* Load secondary firmware */
-	ret = spectrum_dl_image(hw, link, fw_entry->data, 1);
-	release_firmware(fw_entry);
-	if (ret) {
-		printk(KERN_ERR PFX "Secondary firmware download failed\n");
-	}
-
-	return ret;
-}
-
-/********************************************************************/
-/* Device methods     						    */
-/********************************************************************/
-
-static int
-spectrum_cs_hard_reset(struct orinoco_private *priv)
+spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
 {
 	struct orinoco_pccard *card = priv->card;
 	struct pcmcia_device *link = card->p_dev;
-	int err;
 
-	if (!hermes_present(&priv->hw)) {
-		/* The firmware needs to be reloaded */
-		if (spectrum_dl_firmware(&priv->hw, link) != 0) {
-			printk(KERN_ERR PFX "Firmware download failed\n");
-			err = -ENODEV;
-		}
-	} else {
-		/* Soft reset using COR and HCR */
-		spectrum_reset(link, 0);
-	}
-
-	return 0;
+	return spectrum_reset(link, idle);
 }
 
 /********************************************************************/
@@ -582,7 +182,9 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	struct orinoco_private *priv;
 	struct orinoco_pccard *card;
 
-	dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset);
+	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
+			       spectrum_cs_hard_reset,
+			       spectrum_cs_stop_firmware);
 	if (! dev)
 		return -ENOMEM;
 	priv = netdev_priv(dev);
@@ -593,7 +195,7 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	link->priv = dev;
 
 	/* Interrupt setup */
-	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = orinoco_interrupt;
 	link->irq.Instance = dev; 
@@ -784,7 +386,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	dev->irq = link->irq.AssignedIRQ;
 	card->node.major = card->node.minor = 0;
 
-	/* Reset card and download firmware */
+	/* Reset card */
 	if (spectrum_cs_hard_reset(priv) != 0) {
 		goto failed;
 	}