diff options
| author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
| commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
| tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/tulip/de4x5.c | |
| download | kernel-crypto-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel-crypto-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz kernel-crypto-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip | |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/tulip/de4x5.c')
| -rw-r--r-- | drivers/net/tulip/de4x5.c | 5778 |
1 files changed, 5778 insertions, 0 deletions
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c new file mode 100644 index 00000000000..93800c126e8 --- /dev/null +++ b/drivers/net/tulip/de4x5.c @@ -0,0 +1,5778 @@ +/* de4x5.c: A DIGITAL DC21x4x DECchip and DE425/DE434/DE435/DE450/DE500 + ethernet driver for Linux. + + Copyright 1994, 1995 Digital Equipment Corporation. + + Testing resources for this driver have been made available + in part by NASA Ames Research Center (mjacob@nas.nasa.gov). + + The author may be reached at davies@maniac.ultranet.com. + + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License as published by the + Free Software Foundation; either version 2 of the License, or (at your + option) any later version. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 675 Mass Ave, Cambridge, MA 02139, USA. + + Originally, this driver was written for the Digital Equipment + Corporation series of EtherWORKS ethernet cards: + + DE425 TP/COAX EISA + DE434 TP PCI + DE435 TP/COAX/AUI PCI + DE450 TP/COAX/AUI PCI + DE500 10/100 PCI Fasternet + + but it will now attempt to support all cards which conform to the + Digital Semiconductor SROM Specification. The driver currently + recognises the following chips: + + DC21040 (no SROM) + DC21041[A] + DC21140[A] + DC21142 + DC21143 + + So far the driver is known to work with the following cards: + + KINGSTON + Linksys + ZNYX342 + SMC8432 + SMC9332 (w/new SROM) + ZNYX31[45] + ZNYX346 10/100 4 port (can act as a 10/100 bridge!) + + The driver has been tested on a relatively busy network using the DE425, + DE434, DE435 and DE500 cards and benchmarked with 'ttcp': it transferred + 16M of data to a DECstation 5000/200 as follows: + + TCP UDP + TX RX TX RX + DE425 1030k 997k 1170k 1128k + DE434 1063k 995k 1170k 1125k + DE435 1063k 995k 1170k 1125k + DE500 1063k 998k 1170k 1125k in 10Mb/s mode + + All values are typical (in kBytes/sec) from a sample of 4 for each + measurement. Their error is +/-20k on a quiet (private) network and also + depend on what load the CPU has. + + ========================================================================= + This driver has been written substantially from scratch, although its + inheritance of style and stack interface from 'ewrk3.c' and in turn from + Donald Becker's 'lance.c' should be obvious. With the module autoload of + every usable DECchip board, I pinched Donald's 'next_module' field to + link my modules together. + + Upto 15 EISA cards can be supported under this driver, limited primarily + by the available IRQ lines. I have checked different configurations of + multiple depca, EtherWORKS 3 cards and de4x5 cards and have not found a + problem yet (provided you have at least depca.c v0.38) ... + + PCI support has been added to allow the driver to work with the DE434, + DE435, DE450 and DE500 cards. The I/O accesses are a bit of a kludge due + to the differences in the EISA and PCI CSR address offsets from the base + address. + + The ability to load this driver as a loadable module has been included + and used extensively during the driver development (to save those long + reboot sequences). Loadable module support under PCI and EISA has been + achieved by letting the driver autoprobe as if it were compiled into the + kernel. Do make sure you're not sharing interrupts with anything that + cannot accommodate interrupt sharing! + + To utilise this ability, you have to do 8 things: + + 0) have a copy of the loadable modules code installed on your system. + 1) copy de4x5.c from the /linux/drivers/net directory to your favourite + temporary directory. + 2) for fixed autoprobes (not recommended), edit the source code near + line 5594 to reflect the I/O address you're using, or assign these when + loading by: + + insmod de4x5 io=0xghh where g = bus number + hh = device number + + NB: autoprobing for modules is now supported by default. You may just + use: + + insmod de4x5 + + to load all available boards. For a specific board, still use + the 'io=?' above. + 3) compile de4x5.c, but include -DMODULE in the command line to ensure + that the correct bits are compiled (see end of source code). + 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a + kernel with the de4x5 configuration turned off and reboot. + 5) insmod de4x5 [io=0xghh] + 6) run the net startup bits for your new eth?? interface(s) manually + (usually /etc/rc.inet[12] at boot time). + 7) enjoy! + + To unload a module, turn off the associated interface(s) + 'ifconfig eth?? down' then 'rmmod de4x5'. + + Automedia detection is included so that in principal you can disconnect + from, e.g. TP, reconnect to BNC and things will still work (after a + pause whilst the driver figures out where its media went). My tests + using ping showed that it appears to work.... + + By default, the driver will now autodetect any DECchip based card. + Should you have a need to restrict the driver to DIGITAL only cards, you + can compile with a DEC_ONLY define, or if loading as a module, use the + 'dec_only=1' parameter. + + I've changed the timing routines to use the kernel timer and scheduling + functions so that the hangs and other assorted problems that occurred + while autosensing the media should be gone. A bonus for the DC21040 + auto media sense algorithm is that it can now use one that is more in + line with the rest (the DC21040 chip doesn't have a hardware timer). + The downside is the 1 'jiffies' (10ms) resolution. + + IEEE 802.3u MII interface code has been added in anticipation that some + products may use it in the future. + + The SMC9332 card has a non-compliant SROM which needs fixing - I have + patched this driver to detect it because the SROM format used complies + to a previous DEC-STD format. + + I have removed the buffer copies needed for receive on Intels. I cannot + remove them for Alphas since the Tulip hardware only does longword + aligned DMA transfers and the Alphas get alignment traps with non + longword aligned data copies (which makes them really slow). No comment. + + I have added SROM decoding routines to make this driver work with any + card that supports the Digital Semiconductor SROM spec. This will help + all cards running the dc2114x series chips in particular. Cards using + the dc2104x chips should run correctly with the basic driver. I'm in + debt to <mjacob@feral.com> for the testing and feedback that helped get + this feature working. So far we have tested KINGSTON, SMC8432, SMC9332 + (with the latest SROM complying with the SROM spec V3: their first was + broken), ZNYX342 and LinkSys. ZYNX314 (dual 21041 MAC) and ZNYX 315 + (quad 21041 MAC) cards also appear to work despite their incorrectly + wired IRQs. + + I have added a temporary fix for interrupt problems when some SCSI cards + share the same interrupt as the DECchip based cards. The problem occurs + because the SCSI card wants to grab the interrupt as a fast interrupt + (runs the service routine with interrupts turned off) vs. this card + which really needs to run the service routine with interrupts turned on. + This driver will now add the interrupt service routine as a fast + interrupt if it is bounced from the slow interrupt. THIS IS NOT A + RECOMMENDED WAY TO RUN THE DRIVER and has been done for a limited time + until people sort out their compatibility issues and the kernel + interrupt service code is fixed. YOU SHOULD SEPARATE OUT THE FAST + INTERRUPT CARDS FROM THE SLOW INTERRUPT CARDS to ensure that they do not + run on the same interrupt. PCMCIA/CardBus is another can of worms... + + Finally, I think I have really fixed the module loading problem with + more than one DECchip based card. As a side effect, I don't mess with + the device structure any more which means that if more than 1 card in + 2.0.x is installed (4 in 2.1.x), the user will have to edit + linux/drivers/net/Space.c to make room for them. Hence, module loading + is the preferred way to use this driver, since it doesn't have this + limitation. + + Where SROM media detection is used and full duplex is specified in the + SROM, the feature is ignored unless lp->params.fdx is set at compile + time OR during a module load (insmod de4x5 args='eth??:fdx' [see + below]). This is because there is no way to automatically detect full + duplex links except through autonegotiation. When I include the + autonegotiation feature in the SROM autoconf code, this detection will + occur automatically for that case. + + Command line arguments are now allowed, similar to passing arguments + through LILO. This will allow a per adapter board set up of full duplex + and media. The only lexical constraints are: the board name (dev->name) + appears in the list before its parameters. The list of parameters ends + either at the end of the parameter list or with another board name. The + following parameters are allowed: + + fdx for full duplex + autosense to set the media/speed; with the following + sub-parameters: + TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO + + Case sensitivity is important for the sub-parameters. They *must* be + upper case. Examples: + + insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. + + For a compiled in driver, at or above line 548, place e.g. + #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP" + + Yes, I know full duplex isn't permissible on BNC or AUI; they're just + examples. By default, full duplex is turned off and AUTO is the default + autosense setting. In reality, I expect only the full duplex option to + be used. Note the use of single quotes in the two examples above and the + lack of commas to separate items. ALSO, you must get the requested media + correct in relation to what the adapter SROM says it has. There's no way + to determine this in advance other than by trial and error and common + sense, e.g. call a BNC connectored port 'BNC', not '10Mb'. + + Changed the bus probing. EISA used to be done first, followed by PCI. + Most people probably don't even know what a de425 is today and the EISA + probe has messed up some SCSI cards in the past, so now PCI is always + probed first followed by EISA if a) the architecture allows EISA and + either b) there have been no PCI cards detected or c) an EISA probe is + forced by the user. To force a probe include "force_eisa" in your + insmod "args" line; for built-in kernels either change the driver to do + this automatically or include #define DE4X5_FORCE_EISA on or before + line 1040 in the driver. + + TO DO: + ------ + + Revision History + ---------------- + + Version Date Description + + 0.1 17-Nov-94 Initial writing. ALPHA code release. + 0.2 13-Jan-95 Added PCI support for DE435's. + 0.21 19-Jan-95 Added auto media detection. + 0.22 10-Feb-95 Fix interrupt handler call <chris@cosy.sbg.ac.at>. + Fix recognition bug reported by <bkm@star.rl.ac.uk>. + Add request/release_region code. + Add loadable modules support for PCI. + Clean up loadable modules support. + 0.23 28-Feb-95 Added DC21041 and DC21140 support. + Fix missed frame counter value and initialisation. + Fixed EISA probe. + 0.24 11-Apr-95 Change delay routine to use <linux/udelay>. + Change TX_BUFFS_AVAIL macro. + Change media autodetection to allow manual setting. + Completed DE500 (DC21140) support. + 0.241 18-Apr-95 Interim release without DE500 Autosense Algorithm. + 0.242 10-May-95 Minor changes. + 0.30 12-Jun-95 Timer fix for DC21140. + Portability changes. + Add ALPHA changes from <jestabro@ant.tay1.dec.com>. + Add DE500 semi automatic autosense. + Add Link Fail interrupt TP failure detection. + Add timer based link change detection. + Plugged a memory leak in de4x5_queue_pkt(). + 0.31 13-Jun-95 Fixed PCI stuff for 1.3.1. + 0.32 26-Jun-95 Added verify_area() calls in de4x5_ioctl() from a + suggestion by <heiko@colossus.escape.de>. + 0.33 8-Aug-95 Add shared interrupt support (not released yet). + 0.331 21-Aug-95 Fix de4x5_open() with fast CPUs. + Fix de4x5_interrupt(). + Fix dc21140_autoconf() mess. + No shared interrupt support. + 0.332 11-Sep-95 Added MII management interface routines. + 0.40 5-Mar-96 Fix setup frame timeout <maartenb@hpkuipc.cern.ch>. + Add kernel timer code (h/w is too flaky). + Add MII based PHY autosense. + Add new multicasting code. + Add new autosense algorithms for media/mode + selection using kernel scheduling/timing. + Re-formatted. + Made changes suggested by <jeff@router.patch.net>: + Change driver to detect all DECchip based cards + with DEC_ONLY restriction a special case. + Changed driver to autoprobe as a module. No irq + checking is done now - assume BIOS is good! + Added SMC9332 detection <manabe@Roy.dsl.tutics.ac.jp> + 0.41 21-Mar-96 Don't check for get_hw_addr checksum unless DEC card + only <niles@axp745gsfc.nasa.gov> + Fix for multiple PCI cards reported by <jos@xos.nl> + Duh, put the SA_SHIRQ flag into request_interrupt(). + Fix SMC ethernet address in enet_det[]. + Print chip name instead of "UNKNOWN" during boot. + 0.42 26-Apr-96 Fix MII write TA bit error. + Fix bug in dc21040 and dc21041 autosense code. + Remove buffer copies on receive for Intels. + Change sk_buff handling during media disconnects to + eliminate DUP packets. + Add dynamic TX thresholding. + Change all chips to use perfect multicast filtering. + Fix alloc_device() bug <jari@markkus2.fimr.fi> + 0.43 21-Jun-96 Fix unconnected media TX retry bug. + Add Accton to the list of broken cards. + Fix TX under-run bug for non DC21140 chips. + Fix boot command probe bug in alloc_device() as + reported by <koen.gadeyne@barco.com> and + <orava@nether.tky.hut.fi>. + Add cache locks to prevent a race condition as + reported by <csd@microplex.com> and + <baba@beckman.uiuc.edu>. + Upgraded alloc_device() code. + 0.431 28-Jun-96 Fix potential bug in queue_pkt() from discussion + with <csd@microplex.com> + 0.44 13-Aug-96 Fix RX overflow bug in 2114[023] chips. + Fix EISA probe bugs reported by <os2@kpi.kharkov.ua> + and <michael@compurex.com>. + 0.441 9-Sep-96 Change dc21041_autoconf() to probe quiet BNC media + with a loopback packet. + 0.442 9-Sep-96 Include AUI in dc21041 media printout. Bug reported + by <bhat@mundook.cs.mu.OZ.AU> + 0.45 8-Dec-96 Include endian functions for PPC use, from work + by <cort@cs.nmt.edu> and <g.thomas@opengroup.org>. + 0.451 28-Dec-96 Added fix to allow autoprobe for modules after + suggestion from <mjacob@feral.com>. + 0.5 30-Jan-97 Added SROM decoding functions. + Updated debug flags. + Fix sleep/wakeup calls for PCI cards, bug reported + by <cross@gweep.lkg.dec.com>. + Added multi-MAC, one SROM feature from discussion + with <mjacob@feral.com>. + Added full module autoprobe capability. + Added attempt to use an SMC9332 with broken SROM. + Added fix for ZYNX multi-mac cards that didn't + get their IRQs wired correctly. + 0.51 13-Feb-97 Added endian fixes for the SROM accesses from + <paubert@iram.es> + Fix init_connection() to remove extra device reset. + Fix MAC/PHY reset ordering in dc21140m_autoconf(). + Fix initialisation problem with lp->timeout in + typeX_infoblock() from <paubert@iram.es>. + Fix MII PHY reset problem from work done by + <paubert@iram.es>. + 0.52 26-Apr-97 Some changes may not credit the right people - + a disk crash meant I lost some mail. + Change RX interrupt routine to drop rather than + defer packets to avoid hang reported by + <g.thomas@opengroup.org>. + Fix srom_exec() to return for COMPACT and type 1 + infoblocks. + Added DC21142 and DC21143 functions. + Added byte counters from <phil@tazenda.demon.co.uk> + Added SA_INTERRUPT temporary fix from + <mjacob@feral.com>. + 0.53 12-Nov-97 Fix the *_probe() to include 'eth??' name during + module load: bug reported by + <Piete.Brooks@cl.cam.ac.uk> + Fix multi-MAC, one SROM, to work with 2114x chips: + bug reported by <cmetz@inner.net>. + Make above search independent of BIOS device scan + direction. + Completed DC2114[23] autosense functions. + 0.531 21-Dec-97 Fix DE500-XA 100Mb/s bug reported by + <robin@intercore.com + Fix type1_infoblock() bug introduced in 0.53, from + problem reports by + <parmee@postecss.ncrfran.france.ncr.com> and + <jo@ice.dillingen.baynet.de>. + Added argument list to set up each board from either + a module's command line or a compiled in #define. + Added generic MII PHY functionality to deal with + newer PHY chips. + Fix the mess in 2.1.67. + 0.532 5-Jan-98 Fix bug in mii_get_phy() reported by + <redhat@cococo.net>. + Fix bug in pci_probe() for 64 bit systems reported + by <belliott@accessone.com>. + 0.533 9-Jan-98 Fix more 64 bit bugs reported by <jal@cs.brown.edu>. + 0.534 24-Jan-98 Fix last (?) endian bug from <geert@linux-m68k.org> + 0.535 21-Feb-98 Fix Ethernet Address PROM reset bug for DC21040. + 0.536 21-Mar-98 Change pci_probe() to use the pci_dev structure. + **Incompatible with 2.0.x from here.** + 0.540 5-Jul-98 Atomicize assertion of dev->interrupt for SMP + from <lma@varesearch.com> + Add TP, AUI and BNC cases to 21140m_autoconf() for + case where a 21140 under SROM control uses, e.g. AUI + from problem report by <delchini@lpnp09.in2p3.fr> + Add MII parallel detection to 2114x_autoconf() for + case where no autonegotiation partner exists from + problem report by <mlapsley@ndirect.co.uk>. + Add ability to force connection type directly even + when using SROM control from problem report by + <earl@exis.net>. + Updated the PCI interface to conform with the latest + version. I hope nothing is broken... + Add TX done interrupt modification from suggestion + by <Austin.Donnelly@cl.cam.ac.uk>. + Fix is_anc_capable() bug reported by + <Austin.Donnelly@cl.cam.ac.uk>. + Fix type[13]_infoblock() bug: during MII search, PHY + lp->rst not run because lp->ibn not initialised - + from report & fix by <paubert@iram.es>. + Fix probe bug with EISA & PCI cards present from + report by <eirik@netcom.com>. + 0.541 24-Aug-98 Fix compiler problems associated with i386-string + ops from multiple bug reports and temporary fix + from <paubert@iram.es>. + Fix pci_probe() to correctly emulate the old + pcibios_find_class() function. + Add an_exception() for old ZYNX346 and fix compile + warning on PPC & SPARC, from <ecd@skynet.be>. + Fix lastPCI to correctly work with compiled in + kernels and modules from bug report by + <Zlatko.Calusic@CARNet.hr> et al. + 0.542 15-Sep-98 Fix dc2114x_autoconf() to stop multiple messages + when media is unconnected. + Change dev->interrupt to lp->interrupt to ensure + alignment for Alpha's and avoid their unaligned + access traps. This flag is merely for log messages: + should do something more definitive though... + 0.543 30-Dec-98 Add SMP spin locking. + 0.544 8-May-99 Fix for buggy SROM in Motorola embedded boards using + a 21143 by <mmporter@home.com>. + Change PCI/EISA bus probing order. + 0.545 28-Nov-99 Further Moto SROM bug fix from + <mporter@eng.mcd.mot.com> + Remove double checking for DEBUG_RX in de4x5_dbg_rx() + from report by <geert@linux-m68k.org> + 0.546 22-Feb-01 Fixes Alpha XP1000 oops. The srom_search function + was causing a page fault when initializing the + variable 'pb', on a non de4x5 PCI device, in this + case a PCI bridge (DEC chip 21152). The value of + 'pb' is now only initialized if a de4x5 chip is + present. + <france@handhelds.org> + 0.547 08-Nov-01 Use library crc32 functions by <Matt_Domsch@dell.com> + 0.548 30-Aug-03 Big 2.6 cleanup. Ported to PCI/EISA probing and + generic DMA APIs. Fixed DE425 support on Alpha. + <maz@wild-wind.fr.eu.org> + ========================================================================= +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/eisa.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/crc32.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/time.h> +#include <linux/types.h> +#include <linux/unistd.h> +#include <linux/ctype.h> +#include <linux/dma-mapping.h> +#include <linux/moduleparam.h> +#include <linux/bitops.h> + +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <asm/uaccess.h> +#ifdef CONFIG_PPC_MULTIPLATFORM +#include <asm/machdep.h> +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +#include "de4x5.h" + +static char version[] __devinitdata = "de4x5.c:V0.546 2001/02/22 davies@maniac.ultranet.com\n"; + +#define c_char const char +#define TWIDDLE(a) (u_short)le16_to_cpu(get_unaligned((u_short *)(a))) + +/* +** MII Information +*/ +struct phy_table { + int reset; /* Hard reset required? */ + int id; /* IEEE OUI */ + int ta; /* One cycle TA time - 802.3u is confusing here */ + struct { /* Non autonegotiation (parallel) speed det. */ + int reg; + int mask; + int value; + } spd; +}; + +struct mii_phy { + int reset; /* Hard reset required? */ + int id; /* IEEE OUI */ + int ta; /* One cycle TA time */ + struct { /* Non autonegotiation (parallel) speed det. */ + int reg; + int mask; + int value; + } spd; + int addr; /* MII address for the PHY */ + u_char *gep; /* Start of GEP sequence block in SROM */ + u_char *rst; /* Start of reset sequence in SROM */ + u_int mc; /* Media Capabilities */ + u_int ana; /* NWay Advertisement */ + u_int fdx; /* Full DupleX capabilites for each media */ + u_int ttm; /* Transmit Threshold Mode for each media */ + u_int mci; /* 21142 MII Connector Interrupt info */ +}; + +#define DE4X5_MAX_PHY 8 /* Allow upto 8 attached PHY devices per board */ + +struct sia_phy { + u_char mc; /* Media Code */ + u_char ext; /* csr13-15 valid when set */ + int csr13; /* SIA Connectivity Register */ + int csr14; /* SIA TX/RX Register */ + int csr15; /* SIA General Register */ + int gepc; /* SIA GEP Control Information */ + int gep; /* SIA GEP Data */ +}; + +/* +** Define the know universe of PHY devices that can be +** recognised by this driver. +*/ +static struct phy_table phy_info[] = { + {0, NATIONAL_TX, 1, {0x19, 0x40, 0x00}}, /* National TX */ + {1, BROADCOM_T4, 1, {0x10, 0x02, 0x02}}, /* Broadcom T4 */ + {0, SEEQ_T4 , 1, {0x12, 0x10, 0x10}}, /* SEEQ T4 */ + {0, CYPRESS_T4 , 1, {0x05, 0x20, 0x20}}, /* Cypress T4 */ + {0, 0x7810 , 1, {0x14, 0x0800, 0x0800}} /* Level One LTX970 */ +}; + +/* +** These GENERIC values assumes that the PHY devices follow 802.3u and +** allow parallel detection to set the link partner ability register. +** Detection of 100Base-TX [H/F Duplex] and 100Base-T4 is supported. +*/ +#define GENERIC_REG 0x05 /* Autoneg. Link Partner Advertisement Reg. */ +#define GENERIC_MASK MII_ANLPA_100M /* All 100Mb/s Technologies */ +#define GENERIC_VALUE MII_ANLPA_100M /* 100B-TX, 100B-TX FDX, 100B-T4 */ + +/* +** Define special SROM detection cases +*/ +static c_char enet_det[][ETH_ALEN] = { + {0x00, 0x00, 0xc0, 0x00, 0x00, 0x00}, + {0x00, 0x00, 0xe8, 0x00, 0x00, 0x00} +}; + +#define SMC 1 +#define ACCTON 2 + +/* +** SROM Repair definitions. If a broken SROM is detected a card may +** use this information to help figure out what to do. This is a +** "stab in the dark" and so far for SMC9332's only. +*/ +static c_char srom_repair_info[][100] = { + {0x00,0x1e,0x00,0x00,0x00,0x08, /* SMC9332 */ + 0x1f,0x01,0x8f,0x01,0x00,0x01,0x00,0x02, + 0x01,0x00,0x00,0x78,0xe0,0x01,0x00,0x50, + 0x00,0x18,} +}; + + +#ifdef DE4X5_DEBUG +static int de4x5_debug = DE4X5_DEBUG; +#else +/*static int de4x5_debug = (DEBUG_MII | DEBUG_SROM | DEBUG_PCICFG | DEBUG_MEDIA | DEBUG_VERSION);*/ +static int de4x5_debug = (DEBUG_MEDIA | DEBUG_VERSION); +#endif + +/* +** Allow per adapter set up. For modules this is simply a command line +** parameter, e.g.: +** insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'. +** +** For a compiled in driver, place e.g. +** #define DE4X5_PARM "eth0:fdx autosense=AUI eth2:autosense=TP" +** here +*/ +#ifdef DE4X5_PARM +static char *args = DE4X5_PARM; +#else +static char *args; +#endif + +struct parameters { + int fdx; + int autosense; +}; + +#define DE4X5_AUTOSENSE_MS 250 /* msec autosense tick (DE500) */ + +#define DE4X5_NDA 0xffe0 /* No Device (I/O) Address */ + +/* +** Ethernet PROM defines +*/ +#define PROBE_LENGTH 32 +#define ETH_PROM_SIG 0xAA5500FFUL + +/* +** Ethernet Info +*/ +#define PKT_BUF_SZ 1536 /* Buffer size for each Tx/Rx buffer */ +#define IEEE802_3_SZ 1518 /* Packet + CRC */ +#define MAX_PKT_SZ 1514 /* Maximum ethernet packet length */ +#define MAX_DAT_SZ 1500 /* Maximum ethernet data length */ +#define MIN_DAT_SZ 1 /* Minimum ethernet data length */ +#define PKT_HDR_LEN 14 /* Addresses and data length info */ +#define FAKE_FRAME_LEN (MAX_PKT_SZ + 1) +#define QUEUE_PKT_TIMEOUT (3*HZ) /* 3 second timeout */ + + +/* +** EISA bus defines +*/ +#define DE4X5_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */ +#define DE4X5_EISA_TOTAL_SIZE 0x100 /* I/O address extent */ + +#define EISA_ALLOWED_IRQ_LIST {5, 9, 10, 11} + +#define DE4X5_SIGNATURE {"DE425","DE434","DE435","DE450","DE500"} +#define DE4X5_NAME_LENGTH 8 + +static c_char *de4x5_signatures[] = DE4X5_SIGNATURE; + +/* +** Ethernet PROM defines for DC21040 +*/ +#define PROBE_LENGTH 32 +#define ETH_PROM_SIG 0xAA5500FFUL + +/* +** PCI Bus defines +*/ +#define PCI_MAX_BUS_NUM 8 +#define DE4X5_PCI_TOTAL_SIZE 0x80 /* I/O address extent */ +#define DE4X5_CLASS_CODE 0x00020000 /* Network controller, Ethernet */ + +/* +** Memory Alignment. Each descriptor is 4 longwords long. To force a +** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and +** DESC_ALIGN. ALIGN aligns the start address of the private memory area +** and hence the RX descriptor ring's first entry. +*/ +#define DE4X5_ALIGN4 ((u_long)4 - 1) /* 1 longword align */ +#define DE4X5_ALIGN8 ((u_long)8 - 1) /* 2 longword align */ +#define DE4X5_ALIGN16 ((u_long)16 - 1) /* 4 longword align */ +#define DE4X5_ALIGN32 ((u_long)32 - 1) /* 8 longword align */ +#define DE4X5_ALIGN64 ((u_long)64 - 1) /* 16 longword align */ +#define DE4X5_ALIGN128 ((u_long)128 - 1) /* 32 longword align */ + +#define DE4X5_ALIGN DE4X5_ALIGN32 /* Keep the DC21040 happy... */ +#define DE4X5_CACHE_ALIGN CAL_16LONG +#define DESC_SKIP_LEN DSL_0 /* Must agree with DESC_ALIGN */ +/*#define DESC_ALIGN u32 dummy[4]; / * Must agree with DESC_SKIP_LEN */ +#define DESC_ALIGN + +#ifndef DEC_ONLY /* See README.de4x5 for using this */ +static int dec_only; +#else +static int dec_only = 1; +#endif + +/* +** DE4X5 IRQ ENABLE/DISABLE +*/ +#define ENABLE_IRQs { \ + imr |= lp->irq_en;\ + outl(imr, DE4X5_IMR); /* Enable the IRQs */\ +} + +#define DISABLE_IRQs {\ + imr = inl(DE4X5_IMR);\ + imr &= ~lp->irq_en;\ + outl(imr, DE4X5_IMR); /* Disable the IRQs */\ +} + +#define UNMASK_IRQs {\ + imr |= lp->irq_mask;\ + outl(imr, DE4X5_IMR); /* Unmask the IRQs */\ +} + +#define MASK_IRQs {\ + imr = inl(DE4X5_IMR);\ + imr &= ~lp->irq_mask;\ + outl(imr, DE4X5_IMR); /* Mask the IRQs */\ +} + +/* +** DE4X5 START/STOP +*/ +#define START_DE4X5 {\ + omr = inl(DE4X5_OMR);\ + omr |= OMR_ST | OMR_SR;\ + outl(omr, DE4X5_OMR); /* Enable the TX and/or RX */\ +} + +#define STOP_DE4X5 {\ + omr = inl(DE4X5_OMR);\ + omr &= ~(OMR_ST|OMR_SR);\ + outl(omr, DE4X5_OMR); /* Disable the TX and/or RX */ \ +} + +/* +** DE4X5 SIA RESET +*/ +#define RESET_SIA outl(0, DE4X5_SICR); /* Reset SIA connectivity regs */ + +/* +** DE500 AUTOSENSE TIMER INTERVAL (MILLISECS) +*/ +#define DE4X5_AUTOSENSE_MS 250 + +/* +** SROM Structure +*/ +struct de4x5_srom { + char sub_vendor_id[2]; + char sub_system_id[2]; + char reserved[12]; + char id_block_crc; + char reserved2; + char version; + char num_controllers; + char ieee_addr[6]; + char info[100]; + short chksum; +}; +#define SUB_VENDOR_ID 0x500a + +/* +** DE4X5 Descriptors. Make sure that all the RX buffers are contiguous +** and have sizes of both a power of 2 and a multiple of 4. +** A size of 256 bytes for each buffer could be chosen because over 90% of +** all packets in our network are <256 bytes long and 64 longword alignment +** is possible. 1536 showed better 'ttcp' performance. Take your pick. 32 TX +** descriptors are needed for machines with an ALPHA CPU. +*/ +#define NUM_RX_DESC 8 /* Number of RX descriptors */ +#define NUM_TX_DESC 32 /* Number of TX descriptors */ +#define RX_BUFF_SZ 1536 /* Power of 2 for kmalloc and */ + /* Multiple of 4 for DC21040 */ + /* Allows 512 byte alignment */ +struct de4x5_desc { + volatile s32 status; + u32 des1; + u32 buf; + u32 next; + DESC_ALIGN +}; + +/* +** The DE4X5 private structure +*/ +#define DE4X5_PKT_STAT_SZ 16 +#define DE4X5_PKT_BIN_SZ 128 /* Should be >=100 unless you + increase DE4X5_PKT_STAT_SZ */ + +struct pkt_stats { + u_int bins[DE4X5_PKT_STAT_SZ]; /* Private stats counters */ + u_int unicast; + u_int multicast; + u_int broadcast; + u_int excessive_collisions; + u_int tx_underruns; + u_int excessive_underruns; + u_int rx_runt_frames; + u_int rx_collision; + u_int rx_dribble; + u_int rx_overflow; +}; + +struct de4x5_private { + char adapter_name[80]; /* Adapter name */ + u_long interrupt; /* Aligned ISR flag */ + struct de4x5_desc *rx_ring; /* RX descriptor ring */ + struct de4x5_desc *tx_ring; /* TX descriptor ring */ + struct sk_buff *tx_skb[NUM_TX_DESC]; /* TX skb for freeing when sent */ + struct sk_buff *rx_skb[NUM_RX_DESC]; /* RX skb's */ + int rx_new, rx_old; /* RX descriptor ring pointers */ + int tx_new, tx_old; /* TX descriptor ring pointers */ + char setup_frame[SETUP_FRAME_LEN]; /* Holds MCA and PA info. */ + char frame[64]; /* Min sized packet for loopback*/ + spinlock_t lock; /* Adapter specific spinlock */ + struct net_device_stats stats; /* Public stats */ + struct pkt_stats pktStats; /* Private stats counters */ + char rxRingSize; + char txRingSize; + int bus; /* EISA or PCI */ + int bus_num; /* PCI Bus number */ + int device; /* Device number on PCI bus */ + int state; /* Adapter OPENED or CLOSED */ + int chipset; /* DC21040, DC21041 or DC21140 */ + s32 irq_mask; /* Interrupt Mask (Enable) bits */ + s32 irq_en; /* Summary interrupt bits */ + int media; /* Media (eg TP), mode (eg 100B)*/ + int c_media; /* Remember the last media conn */ + int fdx; /* media full duplex flag */ + int linkOK; /* Link is OK */ + int autosense; /* Allow/disallow autosensing */ + int tx_enable; /* Enable descriptor polling */ + int setup_f; /* Setup frame filtering type */ + int local_state; /* State within a 'media' state */ + struct mii_phy phy[DE4X5_MAX_PHY]; /* List of attached PHY devices */ + struct sia_phy sia; /* SIA PHY Information */ + int active; /* Index to active PHY device */ + int mii_cnt; /* Number of attached PHY's */ + int timeout; /* Scheduling counter */ + struct timer_list timer; /* Timer info for kernel */ + int tmp; /* Temporary global per card */ + struct { + u_long lock; /* Lock the cache accesses */ + s32 csr0; /* Saved Bus Mode Register */ + s32 csr6; /* Saved Operating Mode Reg. */ + s32 csr7; /* Saved IRQ Mask Register */ + s32 gep; /* Saved General Purpose Reg. */ + s32 gepc; /* Control info for GEP */ + s32 csr13; /* Saved SIA Connectivity Reg. */ + s32 csr14; /* Saved SIA TX/RX Register */ + s32 csr15; /* Saved SIA General Register */ + int save_cnt; /* Flag if state already saved */ + struct sk_buff *skb; /* Save the (re-ordered) skb's */ + } cache; + struct de4x5_srom srom; /* A copy of the SROM */ + int cfrv; /* Card CFRV copy */ + int rx_ovf; /* Check for 'RX overflow' tag */ + int useSROM; /* For non-DEC card use SROM */ + int useMII; /* Infoblock using the MII */ + int asBitValid; /* Autosense bits in GEP? */ + int asPolarity; /* 0 => asserted high */ + int asBit; /* Autosense bit number in GEP */ + int defMedium; /* SROM default medium */ + int tcount; /* Last infoblock number */ + int infoblock_init; /* Initialised this infoblock? */ + int infoleaf_offset; /* SROM infoleaf for controller */ + s32 infoblock_csr6; /* csr6 value in SROM infoblock */ + int infoblock_media; /* infoblock media */ + int (*infoleaf_fn)(struct net_device *); /* Pointer to infoleaf function */ + u_char *rst; /* Pointer to Type 5 reset info */ + u_char ibn; /* Infoblock number */ + struct parameters params; /* Command line/ #defined params */ + struct device *gendev; /* Generic device */ + dma_addr_t dma_rings; /* DMA handle for rings */ + int dma_size; /* Size of the DMA area */ + char *rx_bufs; /* rx bufs on alpha, sparc, ... */ +}; + +/* +** To get around certain poxy cards that don't provide an SROM +** for the second and more DECchip, I have to key off the first +** chip's address. I'll assume there's not a bad SROM iff: +** +** o the chipset is the same +** o the bus number is the same and > 0 +** o the sum of all the returned hw address bytes is 0 or 0x5fa +** +** Also have to save the irq for those cards whose hardware designers +** can't follow the PCI to PCI Bridge Architecture spec. +*/ +static struct { + int chipset; + int bus; + int irq; + u_char addr[ETH_ALEN]; +} last = {0,}; + +/* +** The transmit ring full condition is described by the tx_old and tx_new +** pointers by: +** tx_old = tx_new Empty ring +** tx_old = tx_new+1 Full ring +** tx_old+txRingSize = tx_new+1 Full ring (wrapped condition) +*/ +#define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\ + lp->tx_old+lp->txRingSize-lp->tx_new-1:\ + lp->tx_old -lp->tx_new-1) + +#define TX_PKT_PENDING (lp->tx_old != lp->tx_new) + +/* +** Public Functions +*/ +static int de4x5_open(struct net_device *dev); +static int de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t de4x5_interrupt(int irq, void *dev_id, struct pt_regs *regs); +static int de4x5_close(struct net_device *dev); +static struct net_device_stats *de4x5_get_stats(struct net_device *dev); +static void de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len); +static void set_multicast_list(struct net_device *dev); +static int de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); + +/* +** Private functions +*/ +static int de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev); +static int de4x5_init(struct net_device *dev); +static int de4x5_sw_reset(struct net_device *dev); +static int de4x5_rx(struct net_device *dev); +static int de4x5_tx(struct net_device *dev); +static int de4x5_ast(struct net_device *dev); +static int de4x5_txur(struct net_device *dev); +static int de4x5_rx_ovfc(struct net_device *dev); + +static int autoconf_media(struct net_device *dev); +static void create_packet(struct net_device *dev, char *frame, int len); +static void load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb); +static int dc21040_autoconf(struct net_device *dev); +static int dc21041_autoconf(struct net_device *dev); +static int dc21140m_autoconf(struct net_device *dev); +static int dc2114x_autoconf(struct net_device *dev); +static int srom_autoconf(struct net_device *dev); +static int de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, int (*fn)(struct net_device *, int), int (*asfn)(struct net_device *)); +static int dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, int next_state, int suspect_state, int (*fn)(struct net_device *, int)); +static int test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec); +static int test_for_100Mb(struct net_device *dev, int msec); +static int wait_for_link(struct net_device *dev); +static int test_mii_reg(struct net_device *dev, int reg, int mask, int pol, long msec); +static int is_spd_100(struct net_device *dev); +static int is_100_up(struct net_device *dev); +static int is_10_up(struct net_device *dev); +static int is_anc_capable(struct net_device *dev); +static int ping_media(struct net_device *dev, int msec); +static struct sk_buff *de4x5_alloc_rx_buff(struct net_device *dev, int index, int len); +static void de4x5_free_rx_buffs(struct net_device *dev); +static void de4x5_free_tx_buffs(struct net_device *dev); +static void de4x5_save_skbs(struct net_device *dev); +static void de4x5_rst_desc_ring(struct net_device *dev); +static void de4x5_cache_state(struct net_device *dev, int flag); +static void de4x5_put_cache(struct net_device *dev, struct sk_buff *skb); +static void de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb); +static struct sk_buff *de4x5_get_cache(struct net_device *dev); +static void de4x5_setup_intr(struct net_device *dev); +static void de4x5_init_connection(struct net_device *dev); +static int de4x5_reset_phy(struct net_device *dev); +static void reset_init_sia(struct net_device *dev, s32 sicr, s32 strr, s32 sigr); +static int test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec); +static int test_tp(struct net_device *dev, s32 msec); +static int EISA_signature(char *name, struct device *device); +static int PCI_signature(char *name, struct de4x5_private *lp); +static void DevicePresent(struct net_device *dev, u_long iobase); +static void enet_addr_rst(u_long aprom_addr); +static int de4x5_bad_srom(struct de4x5_private *lp); +static short srom_rd(u_long address, u_char offset); +static void srom_latch(u_int command, u_long address); +static void srom_command(u_int command, u_long address); +static void srom_address(u_int command, u_long address, u_char offset); +static short srom_data(u_int command, u_long address); +/*static void srom_busy(u_int command, u_long address);*/ +static void sendto_srom(u_int command, u_long addr); +static int getfrom_srom(u_long addr); +static int srom_map_media(struct net_device *dev); +static int srom_infoleaf_info(struct net_device *dev); +static void srom_init(struct net_device *dev); +static void srom_exec(struct net_device *dev, u_char *p); +static int mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr); +static void mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr); +static int mii_rdata(u_long ioaddr); +static void mii_wdata(int data, int len, u_long ioaddr); +static void mii_ta(u_long rw, u_long ioaddr); +static int mii_swap(int data, int len); +static void mii_address(u_char addr, u_long ioaddr); +static void sendto_mii(u32 command, int data, u_long ioaddr); +static int getfrom_mii(u32 command, u_long ioaddr); +static int mii_get_oui(u_char phyaddr, u_long ioaddr); +static int mii_get_phy(struct net_device *dev); +static void SetMulticastFilter(struct net_device *dev); +static int get_hw_addr(struct net_device *dev); +static void srom_repair(struct net_device *dev, int card); +static int test_bad_enet(struct net_device *dev, int status); +static int an_exception(struct de4x5_private *lp); +static char *build_setup_frame(struct net_device *dev, int mode); +static void disable_ast(struct net_device *dev); +static void enable_ast(struct net_device *dev, u32 time_out); +static long de4x5_switch_mac_port(struct net_device *dev); +static int gep_rd(struct net_device *dev); +static void gep_wr(s32 data, struct net_device *dev); +static void timeout(struct net_device *dev, void (*fn)(u_long data), u_long data, u_long msec); +static void yawn(struct net_device *dev, int state); +static void de4x5_parse_params(struct net_device *dev); +static void de4x5_dbg_open(struct net_device *dev); +static void de4x5_dbg_mii(struct net_device *dev, int k); +static void de4x5_dbg_media(struct net_device *dev); +static void de4x5_dbg_srom(struct de4x5_srom *p); +static void de4x5_dbg_rx(struct sk_buff *skb, int len); +static int de4x5_strncmp(char *a, char *b, int n); +static int dc21041_infoleaf(struct net_device *dev); +static int dc21140_infoleaf(struct net_device *dev); +static int dc21142_infoleaf(struct net_device *dev); +static int dc21143_infoleaf(struct net_device *dev); +static int type0_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type1_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type2_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type3_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type4_infoblock(struct net_device *dev, u_char count, u_char *p); +static int type5_infoblock(struct net_device *dev, u_char count, u_char *p); +static int compact_infoblock(struct net_device *dev, u_char count, u_char *p); + +/* +** Note now that module autoprobing is allowed under EISA and PCI. The +** IRQ lines will not be auto-detected; instead I'll rely on the BIOSes +** to "do the right thing". +*/ + +static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED */ + +module_param(io, int, 0); +module_param(de4x5_debug, int, 0); +module_param(dec_only, int, 0); +module_param(args, charp, 0); + +MODULE_PARM_DESC(io, "de4x5 I/O base address"); +MODULE_PARM_DESC(de4x5_debug, "de4x5 debug mask"); +MODULE_PARM_DESC(dec_only, "de4x5 probe only for Digital boards (0-1)"); +MODULE_PARM_DESC(args, "de4x5 full duplex and media type settings; see de4x5.c for details"); +MODULE_LICENSE("GPL"); + +/* +** List the SROM infoleaf functions and chipsets +*/ +struct InfoLeaf { + int chipset; + int (*fn)(struct net_device *); +}; +static struct InfoLeaf infoleaf_array[] = { + {DC21041, dc21041_infoleaf}, + {DC21140, dc21140_infoleaf}, + {DC21142, dc21142_infoleaf}, + {DC21143, dc21143_infoleaf} +}; +#define INFOLEAF_SIZE (sizeof(infoleaf_array)/(sizeof(int)+sizeof(int *))) + +/* +** List the SROM info block functions +*/ +static int (*dc_infoblock[])(struct net_device *dev, u_char, u_char *) = { + type0_infoblock, + type1_infoblock, + type2_infoblock, + type3_infoblock, + type4_infoblock, + type5_infoblock, + compact_infoblock +}; + +#define COMPACT (sizeof(dc_infoblock)/sizeof(int *) - 1) + +/* +** Miscellaneous defines... +*/ +#define RESET_DE4X5 {\ + int i;\ + i=inl(DE4X5_BMR);\ + mdelay(1);\ + outl(i | BMR_SWR, DE4X5_BMR);\ + mdelay(1);\ + outl(i, DE4X5_BMR);\ + mdelay(1);\ + for (i=0;i<5;i++) {inl(DE4X5_BMR); mdelay(1);}\ + mdelay(1);\ +} + +#define PHY_HARD_RESET {\ + outl(GEP_HRST, DE4X5_GEP); /* Hard RESET the PHY dev. */\ + mdelay(1); /* Assert for 1ms */\ + outl(0x00, DE4X5_GEP);\ + mdelay(2); /* Wait for 2ms */\ +} + + +static int __devinit +de4x5_hw_init(struct net_device *dev, u_long iobase, struct device *gendev) +{ + char name[DE4X5_NAME_LENGTH + 1]; + struct de4x5_private *lp = netdev_priv(dev); + struct pci_dev *pdev = NULL; + int i, status=0; + + gendev->driver_data = dev; + + /* Ensure we're not sleeping */ + if (lp->bus == EISA) { + outb(WAKEUP, PCI_CFPM); + } else { + pdev = to_pci_dev (gendev); + pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP); + } + mdelay(10); + + RESET_DE4X5; + + if ((inl(DE4X5_STS) & (STS_TS | STS_RS)) != 0) { + return -ENXIO; /* Hardware could not reset */ + } + + /* + ** Now find out what kind of DC21040/DC21041/DC21140 board we have. + */ + lp->useSROM = FALSE; + if (lp->bus == PCI) { + PCI_signature(name, lp); + } else { + EISA_signature(name, gendev); + } + + if (*name == '\0') { /* Not found a board signature */ + return -ENXIO; + } + + dev->base_addr = iobase; + printk ("%s: %s at 0x%04lx", gendev->bus_id, name, iobase); + + printk(", h/w address "); + status = get_hw_addr(dev); + for (i = 0; i < ETH_ALEN - 1; i++) { /* get the ethernet addr. */ + printk("%2.2x:", dev->dev_addr[i]); + } + printk("%2.2x,\n", dev->dev_addr[i]); + + if (status != 0) { + printk(" which has an Ethernet PROM CRC error.\n"); + return -ENXIO; + } else { + lp->cache.gepc = GEP_INIT; + lp->asBit = GEP_SLNK; + lp->asPolarity = GEP_SLNK; + lp->asBitValid = TRUE; + lp->timeout = -1; + lp->gendev = gendev; + spin_lock_init(&lp->lock); + init_timer(&lp->timer); + de4x5_parse_params(dev); + + /* + ** Choose correct autosensing in case someone messed up + */ + lp->autosense = lp->params.autosense; + if (lp->chipset != DC21140) { + if ((lp->chipset==DC21040) && (lp->params.autosense&TP_NW)) { + lp->params.autosense = TP; + } + if ((lp->chipset==DC21041) && (lp->params.autosense&BNC_AUI)) { + lp->params.autosense = BNC; + } + } + lp->fdx = lp->params.fdx; + sprintf(lp->adapter_name,"%s (%s)", name, gendev->bus_id); + + lp->dma_size = (NUM_RX_DESC + NUM_TX_DESC) * sizeof(struct de4x5_desc); +#if defined(__alpha__) || defined(__powerpc__) || defined(__sparc_v9__) || defined(DE4X5_DO_MEMCPY) + lp->dma_size += RX_BUFF_SZ * NUM_RX_DESC + DE4X5_ALIGN; +#endif + lp->rx_ring = dma_alloc_coherent(gendev, lp->dma_size, + &lp->dma_rings, GFP_ATOMIC); + if (lp->rx_ring == NULL) { + return -ENOMEM; + } + + lp->tx_ring = lp->rx_ring + NUM_RX_DESC; + + /* + ** Set up the RX descriptor ring (Intels) + ** Allocate contiguous receive buffers, long word aligned (Alphas) + */ +#if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY) + for (i=0; i<NUM_RX_DESC; i++) { + lp->rx_ring[i].status = 0; + lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); + lp->rx_ring[i].buf = 0; + lp->rx_ring[i].next = 0; + lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */ + } + +#else + { + dma_addr_t dma_rx_bufs; + + dma_rx_bufs = lp->dma_rings + (NUM_RX_DESC + NUM_TX_DESC) + * sizeof(struct de4x5_desc); + dma_rx_bufs = (dma_rx_bufs + DE4X5_ALIGN) & ~DE4X5_ALIGN; + lp->rx_bufs = (char *)(((long)(lp->rx_ring + NUM_RX_DESC + + NUM_TX_DESC) + DE4X5_ALIGN) & ~DE4X5_ALIGN); + for (i=0; i<NUM_RX_DESC; i++) { + lp->rx_ring[i].status = 0; + lp->rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); + lp->rx_ring[i].buf = + cpu_to_le32(dma_rx_bufs+i*RX_BUFF_SZ); + lp->rx_ring[i].next = 0; + lp->rx_skb[i] = (struct sk_buff *) 1; /* Dummy entry */ + } + + } +#endif + + barrier(); + + lp->rxRingSize = NUM_RX_DESC; + lp->txRingSize = NUM_TX_DESC; + + /* Write the end of list marker to the descriptor lists */ + lp->rx_ring[lp->rxRingSize - 1].des1 |= cpu_to_le32(RD_RER); + lp->tx_ring[lp->txRingSize - 1].des1 |= cpu_to_le32(TD_TER); + + /* Tell the adapter where the TX/RX rings are located. */ + outl(lp->dma_rings, DE4X5_RRBA); + outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), + DE4X5_TRBA); + + /* Initialise the IRQ mask and Enable/Disable */ + lp->irq_mask = IMR_RIM | IMR_TIM | IMR_TUM | IMR_UNM; + lp->irq_en = IMR_NIM | IMR_AIM; + + /* Create a loopback packet frame for later media probing */ + create_packet(dev, lp->frame, sizeof(lp->frame)); + + /* Check if the RX overflow bug needs testing for */ + i = lp->cfrv & 0x000000fe; + if ((lp->chipset == DC21140) && (i == 0x20)) { + lp->rx_ovf = 1; + } + + /* Initialise the SROM pointers if possible */ + if (lp->useSROM) { + lp->state = INITIALISED; + if (srom_infoleaf_info(dev)) { + dma_free_coherent (gendev, lp->dma_size, + lp->rx_ring, lp->dma_rings); + return -ENXIO; + } + srom_init(dev); + } + + lp->state = CLOSED; + + /* + ** Check for an MII interface + */ + if ((lp->chipset != DC21040) && (lp->chipset != DC21041)) { + mii_get_phy(dev); + } + +#ifndef __sparc_v9__ + printk(" and requires IRQ%d (provided by %s).\n", dev->irq, +#else + printk(" and requires IRQ%x (provided by %s).\n", dev->irq, +#endif + ((lp->bus == PCI) ? "PCI BIOS" : "EISA CNFG")); + } + + if (de4x5_debug & DEBUG_VERSION) { + printk(version); + } + + /* The DE4X5-specific entries in the device structure. */ + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, gendev); + dev->open = &de4x5_open; + dev->hard_start_xmit = &de4x5_queue_pkt; + dev->stop = &de4x5_close; + dev->get_stats = &de4x5_get_stats; + dev->set_multicast_list = &set_multicast_list; + dev->do_ioctl = &de4x5_ioctl; + + dev->mem_start = 0; + + /* Fill in the generic fields of the device structure. */ + if ((status = register_netdev (dev))) { + dma_free_coherent (gendev, lp->dma_size, + lp->rx_ring, lp->dma_rings); + return status; + } + + /* Let the adapter sleep to save power */ + yawn(dev, SLEEP); + + return status; +} + + +static int +de4x5_open(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, status = 0; + s32 omr; + + /* Allocate the RX buffers */ + for (i=0; i<lp->rxRingSize; i++) { + if (de4x5_alloc_rx_buff(dev, i, 0) == NULL) { + de4x5_free_rx_buffs(dev); + return -EAGAIN; + } + } + + /* + ** Wake up the adapter + */ + yawn(dev, WAKEUP); + + /* + ** Re-initialize the DE4X5... + */ + status = de4x5_init(dev); + spin_lock_init(&lp->lock); + lp->state = OPEN; + de4x5_dbg_open(dev); + + if (request_irq(dev->irq, (void *)de4x5_interrupt, SA_SHIRQ, + lp->adapter_name, dev)) { + printk("de4x5_open(): Requested IRQ%d is busy - attemping FAST/SHARE...", dev->irq); + if (request_irq(dev->irq, de4x5_interrupt, SA_INTERRUPT | SA_SHIRQ, + lp->adapter_name, dev)) { + printk("\n Cannot get IRQ- reconfigure your hardware.\n"); + disable_ast(dev); + de4x5_free_rx_buffs(dev); + de4x5_free_tx_buffs(dev); + yawn(dev, SLEEP); + lp->state = CLOSED; + return -EAGAIN; + } else { + printk("\n Succeeded, but you should reconfigure your hardware to avoid this.\n"); + printk("WARNING: there may be IRQ related problems in heavily loaded systems.\n"); + } + } + + lp->interrupt = UNMASK_INTERRUPTS; + dev->trans_start = jiffies; + + START_DE4X5; + + de4x5_setup_intr(dev); + + if (de4x5_debug & DEBUG_OPEN) { + printk("\tsts: 0x%08x\n", inl(DE4X5_STS)); + printk("\tbmr: 0x%08x\n", inl(DE4X5_BMR)); + printk("\timr: 0x%08x\n", inl(DE4X5_IMR)); + printk("\tomr: 0x%08x\n", inl(DE4X5_OMR)); + printk("\tsisr: 0x%08x\n", inl(DE4X5_SISR)); + printk("\tsicr: 0x%08x\n", inl(DE4X5_SICR)); + printk("\tstrr: 0x%08x\n", inl(DE4X5_STRR)); + printk("\tsigr: 0x%08x\n", inl(DE4X5_SIGR)); + } + + return status; +} + +/* +** Initialize the DE4X5 operating conditions. NB: a chip problem with the +** DC21140 requires using perfect filtering mode for that chip. Since I can't +** see why I'd want > 14 multicast addresses, I have changed all chips to use +** the perfect filtering mode. Keep the DMA burst length at 8: there seems +** to be data corruption problems if it is larger (UDP errors seen from a +** ttcp source). +*/ +static int +de4x5_init(struct net_device *dev) +{ + /* Lock out other processes whilst setting up the hardware */ + netif_stop_queue(dev); + + de4x5_sw_reset(dev); + + /* Autoconfigure the connected port */ + autoconf_media(dev); + + return 0; +} + +static int +de4x5_sw_reset(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, j, status = 0; + s32 bmr, omr; + + /* Select the MII or SRL port now and RESET the MAC */ + if (!lp->useSROM) { + if (lp->phy[lp->active].id != 0) { + lp->infoblock_csr6 = OMR_SDP | OMR_PS | OMR_HBD; + } else { + lp->infoblock_csr6 = OMR_SDP | OMR_TTM; + } + de4x5_switch_mac_port(dev); + } + + /* + ** Set the programmable burst length to 8 longwords for all the DC21140 + ** Fasternet chips and 4 longwords for all others: DMA errors result + ** without these values. Cache align 16 long. + */ + bmr = (lp->chipset==DC21140 ? PBL_8 : PBL_4) | DESC_SKIP_LEN | DE4X5_CACHE_ALIGN; + bmr |= ((lp->chipset & ~0x00ff)==DC2114x ? BMR_RML : 0); + outl(bmr, DE4X5_BMR); + + omr = inl(DE4X5_OMR) & ~OMR_PR; /* Turn off promiscuous mode */ + if (lp->chipset == DC21140) { + omr |= (OMR_SDP | OMR_SB); + } + lp->setup_f = PERFECT; + outl(lp->dma_rings, DE4X5_RRBA); + outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), + DE4X5_TRBA); + + lp->rx_new = lp->rx_old = 0; + lp->tx_new = lp->tx_old = 0; + + for (i = 0; i < lp->rxRingSize; i++) { + lp->rx_ring[i].status = cpu_to_le32(R_OWN); + } + + for (i = 0; i < lp->txRingSize; i++) { + lp->tx_ring[i].status = cpu_to_le32(0); + } + + barrier(); + + /* Build the setup frame depending on filtering mode */ + SetMulticastFilter(dev); + + load_packet(dev, lp->setup_frame, PERFECT_F|TD_SET|SETUP_FRAME_LEN, (struct sk_buff *)1); + outl(omr|OMR_ST, DE4X5_OMR); + + /* Poll for setup frame completion (adapter interrupts are disabled now) */ + + for (j=0, i=0;(i<500) && (j==0);i++) { /* Upto 500ms delay */ + mdelay(1); + if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1; + } + outl(omr, DE4X5_OMR); /* Stop everything! */ + + if (j == 0) { + printk("%s: Setup frame timed out, status %08x\n", dev->name, + inl(DE4X5_STS)); + status = -EIO; + } + + lp->tx_new = (++lp->tx_new) % lp->txRingSize; + lp->tx_old = lp->tx_new; + + return status; +} + +/* +** Writes a socket buffer address to the next available transmit descriptor. +*/ +static int +de4x5_queue_pkt(struct sk_buff *skb, struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int status = 0; + u_long flags = 0; + + netif_stop_queue(dev); + if (lp->tx_enable == NO) { /* Cannot send for now */ + return -1; + } + + /* + ** Clean out the TX ring asynchronously to interrupts - sometimes the + ** interrupts are lost by delayed descriptor status updates relative to + ** the irq assertion, especially with a busy PCI bus. + */ + spin_lock_irqsave(&lp->lock, flags); + de4x5_tx(dev); + spin_unlock_irqrestore(&lp->lock, flags); + + /* Test if cache is already locked - requeue skb if so */ + if (test_and_set_bit(0, (void *)&lp->cache.lock) && !lp->interrupt) + return -1; + + /* Transmit descriptor ring full or stale skb */ + if (netif_queue_stopped(dev) || (u_long) lp->tx_skb[lp->tx_new] > 1) { + if (lp->interrupt) { + de4x5_putb_cache(dev, skb); /* Requeue the buffer */ + } else { + de4x5_put_cache(dev, skb); + } + if (de4x5_debug & DEBUG_TX) { + printk("%s: transmit busy, lost media or stale skb found:\n STS:%08x\n tbusy:%d\n IMR:%08x\n OMR:%08x\n Stale skb: %s\n",dev->name, inl(DE4X5_STS), netif_queue_stopped(dev), inl(DE4X5_IMR), inl(DE4X5_OMR), ((u_long) lp->tx_skb[lp->tx_new] > 1) ? "YES" : "NO"); + } + } else if (skb->len > 0) { + /* If we already have stuff queued locally, use that first */ + if (lp->cache.skb && !lp->interrupt) { + de4x5_put_cache(dev, skb); + skb = de4x5_get_cache(dev); + } + + while (skb && !netif_queue_stopped(dev) && + (u_long) lp->tx_skb[lp->tx_new] <= 1) { + spin_lock_irqsave(&lp->lock, flags); + netif_stop_queue(dev); + load_packet(dev, skb->data, TD_IC | TD_LS | TD_FS | skb->len, skb); + lp->stats.tx_bytes += skb->len; + outl(POLL_DEMAND, DE4X5_TPD);/* Start the TX */ + + lp->tx_new = (++lp->tx_new) % lp->txRingSize; + dev->trans_start = jiffies; + + if (TX_BUFFS_AVAIL) { + netif_start_queue(dev); /* Another pkt may be queued */ + } + skb = de4x5_get_cache(dev); + spin_unlock_irqrestore(&lp->lock, flags); + } + if (skb) de4x5_putb_cache(dev, skb); + } + + lp->cache.lock = 0; + + return status; +} + +/* +** The DE4X5 interrupt handler. +** +** I/O Read/Writes through intermediate PCI bridges are never 'posted', +** so that the asserted interrupt always has some real data to work with - +** if these I/O accesses are ever changed to memory accesses, ensure the +** STS write is read immediately to complete the transaction if the adapter +** is not on bus 0. Lost interrupts can still occur when the PCI bus load +** is high and descriptor status bits cannot be set before the associated +** interrupt is asserted and this routine entered. +*/ +static irqreturn_t +de4x5_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct de4x5_private *lp; + s32 imr, omr, sts, limit; + u_long iobase; + unsigned int handled = 0; + + if (dev == NULL) { + printk ("de4x5_interrupt(): irq %d for unknown device.\n", irq); + return IRQ_NONE; + } + lp = netdev_priv(dev); + spin_lock(&lp->lock); + iobase = dev->base_addr; + + DISABLE_IRQs; /* Ensure non re-entrancy */ + + if (test_and_set_bit(MASK_INTERRUPTS, (void*) &lp->interrupt)) + printk("%s: Re-entering the interrupt handler.\n", dev->name); + + synchronize_irq(dev->irq); + + for (limit=0; limit<8; limit++) { + sts = inl(DE4X5_STS); /* Read IRQ status */ + outl(sts, DE4X5_STS); /* Reset the board interrupts */ + + if (!(sts & lp->irq_mask)) break;/* All done */ + handled = 1; + + if (sts & (STS_RI | STS_RU)) /* Rx interrupt (packet[s] arrived) */ + de4x5_rx(dev); + + if (sts & (STS_TI | STS_TU)) /* Tx interrupt (packet sent) */ + de4x5_tx(dev); + + if (sts & STS_LNF) { /* TP Link has failed */ + lp->irq_mask &= ~IMR_LFM; + } + + if (sts & STS_UNF) { /* Transmit underrun */ + de4x5_txur(dev); + } + + if (sts & STS_SE) { /* Bus Error */ + STOP_DE4X5; + printk("%s: Fatal bus error occurred, sts=%#8x, device stopped.\n", + dev->name, sts); + spin_unlock(&lp->lock); + return IRQ_HANDLED; + } + } + + /* Load the TX ring with any locally stored packets */ + if (!test_and_set_bit(0, (void *)&lp->cache.lock)) { + while (lp->cache.skb && !netif_queue_stopped(dev) && lp->tx_enable) { + de4x5_queue_pkt(de4x5_get_cache(dev), dev); + } + lp->cache.lock = 0; + } + + lp->interrupt = UNMASK_INTERRUPTS; + ENABLE_IRQs; + spin_unlock(&lp->lock); + + return IRQ_RETVAL(handled); +} + +static int +de4x5_rx(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int entry; + s32 status; + + for (entry=lp->rx_new; (s32)le32_to_cpu(lp->rx_ring[entry].status)>=0; + entry=lp->rx_new) { + status = (s32)le32_to_cpu(lp->rx_ring[entry].status); + + if (lp->rx_ovf) { + if (inl(DE4X5_MFC) & MFC_FOCM) { + de4x5_rx_ovfc(dev); + break; + } + } + + if (status & RD_FS) { /* Remember the start of frame */ + lp->rx_old = entry; + } + + if (status & RD_LS) { /* Valid frame status */ + if (lp->tx_enable) lp->linkOK++; + if (status & RD_ES) { /* There was an error. */ + lp->stats.rx_errors++; /* Update the error stats. */ + if (status & (RD_RF | RD_TL)) lp->stats.rx_frame_errors++; + if (status & RD_CE) lp->stats.rx_crc_errors++; + if (status & RD_OF) lp->stats.rx_fifo_errors++; + if (status & RD_TL) lp->stats.rx_length_errors++; + if (status & RD_RF) lp->pktStats.rx_runt_frames++; + if (status & RD_CS) lp->pktStats.rx_collision++; + if (status & RD_DB) lp->pktStats.rx_dribble++; + if (status & RD_OF) lp->pktStats.rx_overflow++; + } else { /* A valid frame received */ + struct sk_buff *skb; + short pkt_len = (short)(le32_to_cpu(lp->rx_ring[entry].status) + >> 16) - 4; + + if ((skb = de4x5_alloc_rx_buff(dev, entry, pkt_len)) == NULL) { + printk("%s: Insufficient memory; nuking packet.\n", + dev->name); + lp->stats.rx_dropped++; + } else { + de4x5_dbg_rx(skb, pkt_len); + + /* Push up the protocol stack */ + skb->protocol=eth_type_trans(skb,dev); + de4x5_local_stats(dev, skb->data, pkt_len); + netif_rx(skb); + + /* Update stats */ + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += pkt_len; + } + } + + /* Change buffer ownership for this frame, back to the adapter */ + for (;lp->rx_old!=entry;lp->rx_old=(++lp->rx_old)%lp->rxRingSize) { + lp->rx_ring[lp->rx_old].status = cpu_to_le32(R_OWN); + barrier(); + } + lp->rx_ring[entry].status = cpu_to_le32(R_OWN); + barrier(); + } + + /* + ** Update entry information + */ + lp->rx_new = (++lp->rx_new) % lp->rxRingSize; + } + + return 0; +} + +static inline void +de4x5_free_tx_buff(struct de4x5_private *lp, int entry) +{ + dma_unmap_single(lp->gendev, le32_to_cpu(lp->tx_ring[entry].buf), + le32_to_cpu(lp->tx_ring[entry].des1) & TD_TBS1, + DMA_TO_DEVICE); + if ((u_long) lp->tx_skb[entry] > 1) + dev_kfree_skb_irq(lp->tx_skb[entry]); + lp->tx_skb[entry] = NULL; +} + +/* +** Buffer sent - check for TX buffer errors. +*/ +static int +de4x5_tx(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int entry; + s32 status; + + for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) { + status = (s32)le32_to_cpu(lp->tx_ring[entry].status); + if (status < 0) { /* Buffer not sent yet */ + break; + } else if (status != 0x7fffffff) { /* Not setup frame */ + if (status & TD_ES) { /* An error happened */ + lp->stats.tx_errors++; + if (status & TD_NC) lp->stats.tx_carrier_errors++; + if (status & TD_LC) lp->stats.tx_window_errors++; + if (status & TD_UF) lp->stats.tx_fifo_errors++; + if (status & TD_EC) lp->pktStats.excessive_collisions++; + if (status & TD_DE) lp->stats.tx_aborted_errors++; + + if (TX_PKT_PENDING) { + outl(POLL_DEMAND, DE4X5_TPD);/* Restart a stalled TX */ + } + } else { /* Packet sent */ + lp->stats.tx_packets++; + if (lp->tx_enable) lp->linkOK++; + } + /* Update the collision counter */ + lp->stats.collisions += ((status & TD_EC) ? 16 : + ((status & TD_CC) >> 3)); + + /* Free the buffer. */ + if (lp->tx_skb[entry] != NULL) + de4x5_free_tx_buff(lp, entry); + } + + /* Update all the pointers */ + lp->tx_old = (++lp->tx_old) % lp->txRingSize; + } + + /* Any resources available? */ + if (TX_BUFFS_AVAIL && netif_queue_stopped(dev)) { + if (lp->interrupt) + netif_wake_queue(dev); + else + netif_start_queue(dev); + } + + return 0; +} + +static int +de4x5_ast(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int next_tick = DE4X5_AUTOSENSE_MS; + + disable_ast(dev); + + if (lp->useSROM) { + next_tick = srom_autoconf(dev); + } else if (lp->chipset == DC21140) { + next_tick = dc21140m_autoconf(dev); + } else if (lp->chipset == DC21041) { + next_tick = dc21041_autoconf(dev); + } else if (lp->chipset == DC21040) { + next_tick = dc21040_autoconf(dev); + } + lp->linkOK = 0; + enable_ast(dev, next_tick); + + return 0; +} + +static int +de4x5_txur(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int omr; + + omr = inl(DE4X5_OMR); + if (!(omr & OMR_SF) || (lp->chipset==DC21041) || (lp->chipset==DC21040)) { + omr &= ~(OMR_ST|OMR_SR); + outl(omr, DE4X5_OMR); + while (inl(DE4X5_STS) & STS_TS); + if ((omr & OMR_TR) < OMR_TR) { + omr += 0x4000; + } else { + omr |= OMR_SF; + } + outl(omr | OMR_ST | OMR_SR, DE4X5_OMR); + } + + return 0; +} + +static int +de4x5_rx_ovfc(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int omr; + + omr = inl(DE4X5_OMR); + outl(omr & ~OMR_SR, DE4X5_OMR); + while (inl(DE4X5_STS) & STS_RS); + + for (; (s32)le32_to_cpu(lp->rx_ring[lp->rx_new].status)>=0;) { + lp->rx_ring[lp->rx_new].status = cpu_to_le32(R_OWN); + lp->rx_new = (++lp->rx_new % lp->rxRingSize); + } + + outl(omr, DE4X5_OMR); + + return 0; +} + +static int +de4x5_close(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 imr, omr; + + disable_ast(dev); + + netif_stop_queue(dev); + + if (de4x5_debug & DEBUG_CLOSE) { + printk("%s: Shutting down ethercard, status was %8.8x.\n", + dev->name, inl(DE4X5_STS)); + } + + /* + ** We stop the DE4X5 here... mask interrupts and stop TX & RX + */ + DISABLE_IRQs; + STOP_DE4X5; + + /* Free the associated irq */ + free_irq(dev->irq, dev); + lp->state = CLOSED; + + /* Free any socket buffers */ + de4x5_free_rx_buffs(dev); + de4x5_free_tx_buffs(dev); + + /* Put the adapter to sleep to save power */ + yawn(dev, SLEEP); + + return 0; +} + +static struct net_device_stats * +de4x5_get_stats(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + lp->stats.rx_missed_errors = (int)(inl(DE4X5_MFC) & (MFC_OVFL | MFC_CNTR)); + + return &lp->stats; +} + +static void +de4x5_local_stats(struct net_device *dev, char *buf, int pkt_len) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + for (i=1; i<DE4X5_PKT_STAT_SZ-1; i++) { + if (pkt_len < (i*DE4X5_PKT_BIN_SZ)) { + lp->pktStats.bins[i]++; + i = DE4X5_PKT_STAT_SZ; + } + } + if (buf[0] & 0x01) { /* Multicast/Broadcast */ + if ((*(s32 *)&buf[0] == -1) && (*(s16 *)&buf[4] == -1)) { + lp->pktStats.broadcast++; + } else { + lp->pktStats.multicast++; + } + } else if ((*(s32 *)&buf[0] == *(s32 *)&dev->dev_addr[0]) && + (*(s16 *)&buf[4] == *(s16 *)&dev->dev_addr[4])) { + lp->pktStats.unicast++; + } + + lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */ + if (lp->pktStats.bins[0] == 0) { /* Reset counters */ + memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats)); + } + + return; +} + +/* +** Removes the TD_IC flag from previous descriptor to improve TX performance. +** If the flag is changed on a descriptor that is being read by the hardware, +** I assume PCI transaction ordering will mean you are either successful or +** just miss asserting the change to the hardware. Anyway you're messing with +** a descriptor you don't own, but this shouldn't kill the chip provided +** the descriptor register is read only to the hardware. +*/ +static void +load_packet(struct net_device *dev, char *buf, u32 flags, struct sk_buff *skb) +{ + struct de4x5_private *lp = netdev_priv(dev); + int entry = (lp->tx_new ? lp->tx_new-1 : lp->txRingSize-1); + dma_addr_t buf_dma = dma_map_single(lp->gendev, buf, flags & TD_TBS1, DMA_TO_DEVICE); + + lp->tx_ring[lp->tx_new].buf = cpu_to_le32(buf_dma); + lp->tx_ring[lp->tx_new].des1 &= cpu_to_le32(TD_TER); + lp->tx_ring[lp->tx_new].des1 |= cpu_to_le32(flags); + lp->tx_skb[lp->tx_new] = skb; + lp->tx_ring[entry].des1 &= cpu_to_le32(~TD_IC); + barrier(); + + lp->tx_ring[lp->tx_new].status = cpu_to_le32(T_OWN); + barrier(); +} + +/* +** Set or clear the multicast filter for this adaptor. +*/ +static void +set_multicast_list(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + /* First, double check that the adapter is open */ + if (lp->state == OPEN) { + if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ + u32 omr; + omr = inl(DE4X5_OMR); + omr |= OMR_PR; + outl(omr, DE4X5_OMR); + } else { + SetMulticastFilter(dev); + load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | + SETUP_FRAME_LEN, (struct sk_buff *)1); + + lp->tx_new = (++lp->tx_new) % lp->txRingSize; + outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */ + dev->trans_start = jiffies; + } + } +} + +/* +** Calculate the hash code and update the logical address filter +** from a list of ethernet multicast addresses. +** Little endian crc one liner from Matt Thomas, DEC. +*/ +static void +SetMulticastFilter(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct dev_mc_list *dmi=dev->mc_list; + u_long iobase = dev->base_addr; + int i, j, bit, byte; + u16 hashcode; + u32 omr, crc; + char *pa; + unsigned char *addrs; + + omr = inl(DE4X5_OMR); + omr &= ~(OMR_PR | OMR_PM); + pa = build_setup_frame(dev, ALL); /* Build the basic frame */ + + if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 14)) { + omr |= OMR_PM; /* Pass all multicasts */ + } else if (lp->setup_f == HASH_PERF) { /* Hash Filtering */ + for (i=0;i<dev->mc_count;i++) { /* for each address in the list */ + addrs=dmi->dmi_addr; + dmi=dmi->next; + if ((*addrs & 0x01) == 1) { /* multicast address? */ + crc = ether_crc_le(ETH_ALEN, addrs); + hashcode = crc & HASH_BITS; /* hashcode is 9 LSb of CRC */ + + byte = hashcode >> 3; /* bit[3-8] -> byte in filter */ + bit = 1 << (hashcode & 0x07);/* bit[0-2] -> bit in byte */ + + byte <<= 1; /* calc offset into setup frame */ + if (byte & 0x02) { + byte -= 1; + } + lp->setup_frame[byte] |= bit; + } + } + } else { /* Perfect filtering */ + for (j=0; j<dev->mc_count; j++) { + addrs=dmi->dmi_addr; + dmi=dmi->next; + for (i=0; i<ETH_ALEN; i++) { + *(pa + (i&1)) = *addrs++; + if (i & 0x01) pa += 4; + } + } + } + outl(omr, DE4X5_OMR); + + return; +} + +#ifdef CONFIG_EISA + +static u_char de4x5_irq[] = EISA_ALLOWED_IRQ_LIST; + +static int __init de4x5_eisa_probe (struct device *gendev) +{ + struct eisa_device *edev; + u_long iobase; + u_char irq, regval; + u_short vendor; + u32 cfid; + int status, device; + struct net_device *dev; + struct de4x5_private *lp; + + edev = to_eisa_device (gendev); + iobase = edev->base_addr; + + if (!request_region (iobase, DE4X5_EISA_TOTAL_SIZE, "de4x5")) + return -EBUSY; + + if (!request_region (iobase + DE4X5_EISA_IO_PORTS, + DE4X5_EISA_TOTAL_SIZE, "de4x5")) { + status = -EBUSY; + goto release_reg_1; + } + + if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) { + status = -ENOMEM; + goto release_reg_2; + } + lp = netdev_priv(dev); + + cfid = (u32) inl(PCI_CFID); + lp->cfrv = (u_short) inl(PCI_CFRV); + device = (cfid >> 8) & 0x00ffff00; + vendor = (u_short) cfid; + + /* Read the EISA Configuration Registers */ + regval = inb(EISA_REG0) & (ER0_INTL | ER0_INTT); +#ifdef CONFIG_ALPHA + /* Looks like the Jensen firmware (rev 2.2) doesn't really + * care about the EISA configuration, and thus doesn't + * configure the PLX bridge properly. Oh well... Simply mimic + * the EISA config file to sort it out. */ + + /* EISA REG1: Assert DecChip 21040 HW Reset */ + outb (ER1_IAM | 1, EISA_REG1); + mdelay (1); + + /* EISA REG1: Deassert DecChip 21040 HW Reset */ + outb (ER1_IAM, EISA_REG1); + mdelay (1); + + /* EISA REG3: R/W Burst Transfer Enable */ + outb (ER3_BWE | ER3_BRE, EISA_REG3); + + /* 32_bit slave/master, Preempt Time=23 bclks, Unlatched Interrupt */ + outb (ER0_BSW | ER0_BMW | ER0_EPT | regval, EISA_REG0); +#endif + irq = de4x5_irq[(regval >> 1) & 0x03]; + + if (is_DC2114x) { + device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); + } + lp->chipset = device; + lp->bus = EISA; + + /* Write the PCI Configuration Registers */ + outl(PCI_COMMAND_IO | PCI_COMMAND_MASTER, PCI_CFCS); + outl(0x00006000, PCI_CFLT); + outl(iobase, PCI_CBIO); + + DevicePresent(dev, EISA_APROM); + + dev->irq = irq; + + if (!(status = de4x5_hw_init (dev, iobase, gendev))) { + return 0; + } + + free_netdev (dev); + release_reg_2: + release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE); + release_reg_1: + release_region (iobase, DE4X5_EISA_TOTAL_SIZE); + + return status; +} + +static int __devexit de4x5_eisa_remove (struct device *device) +{ + struct net_device *dev; + u_long iobase; + + dev = device->driver_data; + iobase = dev->base_addr; + + unregister_netdev (dev); + free_netdev (dev); + release_region (iobase + DE4X5_EISA_IO_PORTS, DE4X5_EISA_TOTAL_SIZE); + release_region (iobase, DE4X5_EISA_TOTAL_SIZE); + + return 0; +} + +static struct eisa_device_id de4x5_eisa_ids[] = { + { "DEC4250", 0 }, /* 0 is the board name index... */ + { "" } +}; + +static struct eisa_driver de4x5_eisa_driver = { + .id_table = de4x5_eisa_ids, + .driver = { + .name = "de4x5", + .probe = de4x5_eisa_probe, + .remove = __devexit_p (de4x5_eisa_remove), + } +}; +MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); +#endif + +#ifdef CONFIG_PCI + +/* +** This function searches the current bus (which is >0) for a DECchip with an +** SROM, so that in multiport cards that have one SROM shared between multiple +** DECchips, we can find the base SROM irrespective of the BIOS scan direction. +** For single port cards this is a time waster... +*/ +static void __devinit +srom_search(struct net_device *dev, struct pci_dev *pdev) +{ + u_char pb; + u_short vendor, status; + u_int irq = 0, device; + u_long iobase = 0; /* Clear upper 32 bits in Alphas */ + int i, j, cfrv; + struct de4x5_private *lp = netdev_priv(dev); + struct list_head *walk = &pdev->bus_list; + + for (walk = walk->next; walk != &pdev->bus_list; walk = walk->next) { + struct pci_dev *this_dev = pci_dev_b(walk); + + /* Skip the pci_bus list entry */ + if (list_entry(walk, struct pci_bus, devices) == pdev->bus) continue; + + vendor = this_dev->vendor; + device = this_dev->device << 8; + if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) continue; + + /* Get the chip configuration revision register */ + pb = this_dev->bus->number; + pci_read_config_dword(this_dev, PCI_REVISION_ID, &cfrv); + + /* Set the device number information */ + lp->device = PCI_SLOT(this_dev->devfn); + lp->bus_num = pb; + + /* Set the chipset information */ + if (is_DC2114x) { + device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); + } + lp->chipset = device; + + /* Get the board I/O address (64 bits on sparc64) */ + iobase = pci_resource_start(this_dev, 0); + + /* Fetch the IRQ to be used */ + irq = this_dev->irq; + if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) continue; + + /* Check if I/O accesses are enabled */ + pci_read_config_word(this_dev, PCI_COMMAND, &status); + if (!(status & PCI_COMMAND_IO)) continue; + + /* Search for a valid SROM attached to this DECchip */ + DevicePresent(dev, DE4X5_APROM); + for (j=0, i=0; i<ETH_ALEN; i++) { + j += (u_char) *((u_char *)&lp->srom + SROM_HWADD + i); + } + if ((j != 0) && (j != 0x5fa)) { + last.chipset = device; + last.bus = pb; + last.irq = irq; + for (i=0; i<ETH_ALEN; i++) { + last.addr[i] = (u_char)*((u_char *)&lp->srom + SROM_HWADD + i); + } + return; + } + } + + return; +} + +/* +** PCI bus I/O device probe +** NB: PCI I/O accesses and Bus Mastering are enabled by the PCI BIOS, not +** the driver. Some PCI BIOS's, pre V2.1, need the slot + features to be +** enabled by the user first in the set up utility. Hence we just check for +** enabled features and silently ignore the card if they're not. +** +** STOP PRESS: Some BIOS's __require__ the driver to enable the bus mastering +** bit. Here, check for I/O accesses and then set BM. If you put the card in +** a non BM slot, you're on your own (and complain to the PC vendor that your +** PC doesn't conform to the PCI standard)! +** +** This function is only compatible with the *latest* 2.1.x kernels. For 2.0.x +** kernels use the V0.535[n] drivers. +*/ + +static int __devinit de4x5_pci_probe (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + u_char pb, pbus = 0, dev_num, dnum = 0, timer; + u_short vendor, status; + u_int irq = 0, device; + u_long iobase = 0; /* Clear upper 32 bits in Alphas */ + int error; + struct net_device *dev; + struct de4x5_private *lp; + + dev_num = PCI_SLOT(pdev->devfn); + pb = pdev->bus->number; + + if (io) { /* probe a single PCI device */ + pbus = (u_short)(io >> 8); + dnum = (u_short)(io & 0xff); + if ((pbus != pb) || (dnum != dev_num)) + return -ENODEV; + } + + vendor = pdev->vendor; + device = pdev->device << 8; + if (!(is_DC21040 || is_DC21041 || is_DC21140 || is_DC2114x)) + return -ENODEV; + + /* Ok, the device seems to be for us. */ + if ((error = pci_enable_device (pdev))) + return error; + + if (!(dev = alloc_etherdev (sizeof (struct de4x5_private)))) { + error = -ENOMEM; + goto disable_dev; + } + + lp = netdev_priv(dev); + lp->bus = PCI; + lp->bus_num = 0; + + /* Search for an SROM on this bus */ + if (lp->bus_num != pb) { + lp->bus_num = pb; + srom_search(dev, pdev); + } + + /* Get the chip configuration revision register */ + pci_read_config_dword(pdev, PCI_REVISION_ID, &lp->cfrv); + + /* Set the device number information */ + lp->device = dev_num; + lp->bus_num = pb; + + /* Set the chipset information */ + if (is_DC2114x) { + device = ((lp->cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143); + } + lp->chipset = device; + + /* Get the board I/O address (64 bits on sparc64) */ + iobase = pci_resource_start(pdev, 0); + + /* Fetch the IRQ to be used */ + irq = pdev->irq; + if ((irq == 0) || (irq == 0xff) || ((int)irq == -1)) { + error = -ENODEV; + goto free_dev; + } + + /* Check if I/O accesses and Bus Mastering are enabled */ + pci_read_config_word(pdev, PCI_COMMAND, &status); +#ifdef __powerpc__ + if (!(status & PCI_COMMAND_IO)) { + status |= PCI_COMMAND_IO; + pci_write_config_word(pdev, PCI_COMMAND, status); + pci_read_config_word(pdev, PCI_COMMAND, &status); + } +#endif /* __powerpc__ */ + if (!(status & PCI_COMMAND_IO)) { + error = -ENODEV; + goto free_dev; + } + + if (!(status & PCI_COMMAND_MASTER)) { + status |= PCI_COMMAND_MASTER; + pci_write_config_word(pdev, PCI_COMMAND, status); + pci_read_config_word(pdev, PCI_COMMAND, &status); + } + if (!(status & PCI_COMMAND_MASTER)) { + error = -ENODEV; + goto free_dev; + } + + /* Check the latency timer for values >= 0x60 */ + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &timer); + if (timer < 0x60) { + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x60); + } + + DevicePresent(dev, DE4X5_APROM); + + if (!request_region (iobase, DE4X5_PCI_TOTAL_SIZE, "de4x5")) { + error = -EBUSY; + goto free_dev; + } + + dev->irq = irq; + + if ((error = de4x5_hw_init(dev, iobase, &pdev->dev))) { + goto release; + } + + return 0; + + release: + release_region (iobase, DE4X5_PCI_TOTAL_SIZE); + free_dev: + free_netdev (dev); + disable_dev: + pci_disable_device (pdev); + return error; +} + +static void __devexit de4x5_pci_remove (struct pci_dev *pdev) +{ + struct net_device *dev; + u_long iobase; + + dev = pdev->dev.driver_data; + iobase = dev->base_addr; + + unregister_netdev (dev); + free_netdev (dev); + release_region (iobase, DE4X5_PCI_TOTAL_SIZE); + pci_disable_device (pdev); +} + +static struct pci_device_id de4x5_pci_tbl[] = { + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { }, +}; + +static struct pci_driver de4x5_pci_driver = { + .name = "de4x5", + .id_table = de4x5_pci_tbl, + .probe = de4x5_pci_probe, + .remove = __devexit_p (de4x5_pci_remove), +}; + +#endif + +/* +** Auto configure the media here rather than setting the port at compile +** time. This routine is called by de4x5_init() and when a loss of media is +** detected (excessive collisions, loss of carrier, no carrier or link fail +** [TP] or no recent receive activity) to check whether the user has been +** sneaky and changed the port on us. +*/ +static int +autoconf_media(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int next_tick = DE4X5_AUTOSENSE_MS; + + lp->linkOK = 0; + lp->c_media = AUTO; /* Bogus last media */ + disable_ast(dev); + inl(DE4X5_MFC); /* Zero the lost frames counter */ + lp->media = INIT; + lp->tcount = 0; + + if (lp->useSROM) { + next_tick = srom_autoconf(dev); + } else if (lp->chipset == DC21040) { + next_tick = dc21040_autoconf(dev); + } else if (lp->chipset == DC21041) { + next_tick = dc21041_autoconf(dev); + } else if (lp->chipset == DC21140) { + next_tick = dc21140m_autoconf(dev); + } + + enable_ast(dev, next_tick); + + return (lp->media); +} + +/* +** Autoconfigure the media when using the DC21040. AUI cannot be distinguished +** from BNC as the port has a jumper to set thick or thin wire. When set for +** BNC, the BNC port will indicate activity if it's not terminated correctly. +** The only way to test for that is to place a loopback packet onto the +** network and watch for errors. Since we're messing with the interrupt mask +** register, disable the board interrupts and do not allow any more packets to +** be queued to the hardware. Re-enable everything only when the media is +** found. +** I may have to "age out" locally queued packets so that the higher layer +** timeouts don't effectively duplicate packets on the network. +*/ +static int +dc21040_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int next_tick = DE4X5_AUTOSENSE_MS; + s32 imr; + + switch (lp->media) { + case INIT: + DISABLE_IRQs; + lp->tx_enable = NO; + lp->timeout = -1; + de4x5_save_skbs(dev); + if ((lp->autosense == AUTO) || (lp->autosense == TP)) { + lp->media = TP; + } else if ((lp->autosense == BNC) || (lp->autosense == AUI) || (lp->autosense == BNC_AUI)) { + lp->media = BNC_AUI; + } else if (lp->autosense == EXT_SIA) { + lp->media = EXT_SIA; + } else { + lp->media = NC; + } + lp->local_state = 0; + next_tick = dc21040_autoconf(dev); + break; + + case TP: + next_tick = dc21040_state(dev, 0x8f01, 0xffff, 0x0000, 3000, BNC_AUI, + TP_SUSPECT, test_tp); + break; + + case TP_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21040_autoconf); + break; + + case BNC: + case AUI: + case BNC_AUI: + next_tick = dc21040_state(dev, 0x8f09, 0x0705, 0x0006, 3000, EXT_SIA, + BNC_AUI_SUSPECT, ping_media); + break; + + case BNC_AUI_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, BNC_AUI, ping_media, dc21040_autoconf); + break; + + case EXT_SIA: + next_tick = dc21040_state(dev, 0x3041, 0x0000, 0x0006, 3000, + NC, EXT_SIA_SUSPECT, ping_media); + break; + + case EXT_SIA_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, EXT_SIA, ping_media, dc21040_autoconf); + break; + + case NC: + /* default to TP for all */ + reset_init_sia(dev, 0x8f01, 0xffff, 0x0000); + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tx_enable = NO; + break; + } + + return next_tick; +} + +static int +dc21040_state(struct net_device *dev, int csr13, int csr14, int csr15, int timeout, + int next_state, int suspect_state, + int (*fn)(struct net_device *, int)) +{ + struct de4x5_private *lp = netdev_priv(dev); + int next_tick = DE4X5_AUTOSENSE_MS; + int linkBad; + + switch (lp->local_state) { + case 0: + reset_init_sia(dev, csr13, csr14, csr15); + lp->local_state++; + next_tick = 500; + break; + + case 1: + if (!lp->tx_enable) { + linkBad = fn(dev, timeout); + if (linkBad < 0) { + next_tick = linkBad & ~TIMER_CB; + } else { + if (linkBad && (lp->autosense == AUTO)) { + lp->local_state = 0; + lp->media = next_state; + } else { + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = suspect_state; + next_tick = 3000; + } + break; + } + + return next_tick; +} + +static int +de4x5_suspect_state(struct net_device *dev, int timeout, int prev_state, + int (*fn)(struct net_device *, int), + int (*asfn)(struct net_device *)) +{ + struct de4x5_private *lp = netdev_priv(dev); + int next_tick = DE4X5_AUTOSENSE_MS; + int linkBad; + + switch (lp->local_state) { + case 1: + if (lp->linkOK) { + lp->media = prev_state; + } else { + lp->local_state++; + next_tick = asfn(dev); + } + break; + + case 2: + linkBad = fn(dev, timeout); + if (linkBad < 0) { + next_tick = linkBad & ~TIMER_CB; + } else if (!linkBad) { + lp->local_state--; + lp->media = prev_state; + } else { + lp->media = INIT; + lp->tcount++; + } + } + + return next_tick; +} + +/* +** Autoconfigure the media when using the DC21041. AUI needs to be tested +** before BNC, because the BNC port will indicate activity if it's not +** terminated correctly. The only way to test for that is to place a loopback +** packet onto the network and watch for errors. Since we're messing with +** the interrupt mask register, disable the board interrupts and do not allow +** any more packets to be queued to the hardware. Re-enable everything only +** when the media is found. +*/ +static int +dc21041_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 sts, irqs, irq_mask, imr, omr; + int next_tick = DE4X5_AUTOSENSE_MS; + + switch (lp->media) { + case INIT: + DISABLE_IRQs; + lp->tx_enable = NO; + lp->timeout = -1; + de4x5_save_skbs(dev); /* Save non transmitted skb's */ + if ((lp->autosense == AUTO) || (lp->autosense == TP_NW)) { + lp->media = TP; /* On chip auto negotiation is broken */ + } else if (lp->autosense == TP) { + lp->media = TP; + } else if (lp->autosense == BNC) { + lp->media = BNC; + } else if (lp->autosense == AUI) { + lp->media = AUI; + } else { + lp->media = NC; + } + lp->local_state = 0; + next_tick = dc21041_autoconf(dev); + break; + + case TP_NW: + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR);/* Set up full duplex for the autonegotiate */ + outl(omr | OMR_FDX, DE4X5_OMR); + } + irqs = STS_LNF | STS_LNP; + irq_mask = IMR_LFM | IMR_LPM; + sts = test_media(dev, irqs, irq_mask, 0xef01, 0xffff, 0x0008, 2400); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (sts & STS_LNP) { + lp->media = ANS; + } else { + lp->media = AUI; + } + next_tick = dc21041_autoconf(dev); + } + break; + + case ANS: + if (!lp->tx_enable) { + irqs = STS_LNP; + irq_mask = IMR_LPM; + sts = test_ans(dev, irqs, irq_mask, 3000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(sts & STS_LNP) && (lp->autosense == AUTO)) { + lp->media = TP; + next_tick = dc21041_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = ANS_SUSPECT; + next_tick = 3000; + } + break; + + case ANS_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, ANS, test_tp, dc21041_autoconf); + break; + + case TP: + if (!lp->tx_enable) { + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for TP */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = STS_LNF | STS_LNP; + irq_mask = IMR_LFM | IMR_LPM; + sts = test_media(dev,irqs, irq_mask, 0xef01, 0xff3f, 0x0008, 2400); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(sts & STS_LNP) && (lp->autosense == AUTO)) { + if (inl(DE4X5_SISR) & SISR_NRA) { + lp->media = AUI; /* Non selected port activity */ + } else { + lp->media = BNC; + } + next_tick = dc21041_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = TP_SUSPECT; + next_tick = 3000; + } + break; + + case TP_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, TP, test_tp, dc21041_autoconf); + break; + + case AUI: + if (!lp->tx_enable) { + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x000e, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) { + lp->media = BNC; + next_tick = dc21041_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = AUI_SUSPECT; + next_tick = 3000; + } + break; + + case AUI_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc21041_autoconf); + break; + + case BNC: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0xef09, 0xf73d, 0x0006, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + lp->local_state++; /* Ensure media connected */ + next_tick = dc21041_autoconf(dev); + } + break; + + case 1: + if (!lp->tx_enable) { + if ((sts = ping_media(dev, 3000)) < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (sts) { + lp->local_state = 0; + lp->media = NC; + } else { + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = BNC_SUSPECT; + next_tick = 3000; + } + break; + } + break; + + case BNC_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc21041_autoconf); + break; + + case NC: + omr = inl(DE4X5_OMR); /* Set up full duplex for the autonegotiate */ + outl(omr | OMR_FDX, DE4X5_OMR); + reset_init_sia(dev, 0xef01, 0xffff, 0x0008);/* Initialise the SIA */ + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tx_enable = NO; + break; + } + + return next_tick; +} + +/* +** Some autonegotiation chips are broken in that they do not return the +** acknowledge bit (anlpa & MII_ANLPA_ACK) in the link partner advertisement +** register, except at the first power up negotiation. +*/ +static int +dc21140m_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int ana, anlpa, cap, cr, slnk, sr; + int next_tick = DE4X5_AUTOSENSE_MS; + u_long imr, omr, iobase = dev->base_addr; + + switch(lp->media) { + case INIT: + if (lp->timeout < 0) { + DISABLE_IRQs; + lp->tx_enable = FALSE; + lp->linkOK = 0; + de4x5_save_skbs(dev); /* Save non transmitted skb's */ + } + if ((next_tick = de4x5_reset_phy(dev)) < 0) { + next_tick &= ~TIMER_CB; + } else { + if (lp->useSROM) { + if (srom_map_media(dev) < 0) { + lp->tcount++; + return next_tick; + } + srom_exec(dev, lp->phy[lp->active].gep); + if (lp->infoblock_media == ANS) { + ana = lp->phy[lp->active].ana | MII_ANA_CSMA; + mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + } + } else { + lp->tmp = MII_SR_ASSC; /* Fake out the MII speed set */ + SET_10Mb; + if (lp->autosense == _100Mb) { + lp->media = _100Mb; + } else if (lp->autosense == _10Mb) { + lp->media = _10Mb; + } else if ((lp->autosense == AUTO) && + ((sr=is_anc_capable(dev)) & MII_SR_ANC)) { + ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA); + ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM); + mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + lp->media = ANS; + } else if (lp->autosense == AUTO) { + lp->media = SPD_DET; + } else if (is_spd_100(dev) && is_100_up(dev)) { + lp->media = _100Mb; + } else { + lp->media = NC; + } + } + lp->local_state = 0; + next_tick = dc21140m_autoconf(dev); + } + break; + + case ANS: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); + } + cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, FALSE, 500); + if (cr < 0) { + next_tick = cr & ~TIMER_CB; + } else { + if (cr) { + lp->local_state = 0; + lp->media = SPD_DET; + } else { + lp->local_state++; + } + next_tick = dc21140m_autoconf(dev); + } + break; + + case 1: + if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) { + next_tick = sr & ~TIMER_CB; + } else { + lp->media = SPD_DET; + lp->local_state = 0; + if (sr) { /* Success! */ + lp->tmp = MII_SR_ASSC; + anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII); + ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + if (!(anlpa & MII_ANLPA_RF) && + (cap = anlpa & MII_ANLPA_TAF & ana)) { + if (cap & MII_ANA_100M) { + lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE); + lp->media = _100Mb; + } else if (cap & MII_ANA_10M) { + lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) ? TRUE : FALSE); + + lp->media = _10Mb; + } + } + } /* Auto Negotiation failed to finish */ + next_tick = dc21140m_autoconf(dev); + } /* Auto Negotiation failed to start */ + break; + } + break; + + case SPD_DET: /* Choose 10Mb/s or 100Mb/s */ + if (lp->timeout < 0) { + lp->tmp = (lp->phy[lp->active].id ? MII_SR_LKS : + (~gep_rd(dev) & GEP_LNP)); + SET_100Mb_PDET; + } + if ((slnk = test_for_100Mb(dev, 6500)) < 0) { + next_tick = slnk & ~TIMER_CB; + } else { + if (is_spd_100(dev) && is_100_up(dev)) { + lp->media = _100Mb; + } else if ((!is_spd_100(dev) && (is_10_up(dev) & lp->tmp))) { + lp->media = _10Mb; + } else { + lp->media = NC; + } + next_tick = dc21140m_autoconf(dev); + } + break; + + case _100Mb: /* Set 100Mb/s */ + next_tick = 3000; + if (!lp->tx_enable) { + SET_100Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + case BNC: + case AUI: + case _10Mb: /* Set 10Mb/s */ + next_tick = 3000; + if (!lp->tx_enable) { + SET_10Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + case NC: + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tx_enable = FALSE; + break; + } + + return next_tick; +} + +/* +** This routine may be merged into dc21140m_autoconf() sometime as I'm +** changing how I figure out the media - but trying to keep it backwards +** compatible with the de500-xa and de500-aa. +** Whether it's BNC, AUI, SYM or MII is sorted out in the infoblock +** functions and set during de4x5_mac_port() and/or de4x5_reset_phy(). +** This routine just has to figure out whether 10Mb/s or 100Mb/s is +** active. +** When autonegotiation is working, the ANS part searches the SROM for +** the highest common speed (TP) link that both can run and if that can +** be full duplex. That infoblock is executed and then the link speed set. +** +** Only _10Mb and _100Mb are tested here. +*/ +static int +dc2114x_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 cr, anlpa, ana, cap, irqs, irq_mask, imr, omr, slnk, sr, sts; + int next_tick = DE4X5_AUTOSENSE_MS; + + switch (lp->media) { + case INIT: + if (lp->timeout < 0) { + DISABLE_IRQs; + lp->tx_enable = FALSE; + lp->linkOK = 0; + lp->timeout = -1; + de4x5_save_skbs(dev); /* Save non transmitted skb's */ + if (lp->params.autosense & ~AUTO) { + srom_map_media(dev); /* Fixed media requested */ + if (lp->media != lp->params.autosense) { + lp->tcount++; + lp->media = INIT; + return next_tick; + } + lp->media = INIT; + } + } + if ((next_tick = de4x5_reset_phy(dev)) < 0) { + next_tick &= ~TIMER_CB; + } else { + if (lp->autosense == _100Mb) { + lp->media = _100Mb; + } else if (lp->autosense == _10Mb) { + lp->media = _10Mb; + } else if (lp->autosense == TP) { + lp->media = TP; + } else if (lp->autosense == BNC) { + lp->media = BNC; + } else if (lp->autosense == AUI) { + lp->media = AUI; + } else { + lp->media = SPD_DET; + if ((lp->infoblock_media == ANS) && + ((sr=is_anc_capable(dev)) & MII_SR_ANC)) { + ana = (((sr >> 6) & MII_ANA_TAF) | MII_ANA_CSMA); + ana &= (lp->fdx ? ~0 : ~MII_ANA_FDAM); + mii_wr(ana, MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + lp->media = ANS; + } + } + lp->local_state = 0; + next_tick = dc2114x_autoconf(dev); + } + break; + + case ANS: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + mii_wr(MII_CR_ASSE | MII_CR_RAN, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); + } + cr = test_mii_reg(dev, MII_CR, MII_CR_RAN, FALSE, 500); + if (cr < 0) { + next_tick = cr & ~TIMER_CB; + } else { + if (cr) { + lp->local_state = 0; + lp->media = SPD_DET; + } else { + lp->local_state++; + } + next_tick = dc2114x_autoconf(dev); + } + break; + + case 1: + if ((sr=test_mii_reg(dev, MII_SR, MII_SR_ASSC, TRUE, 2000)) < 0) { + next_tick = sr & ~TIMER_CB; + } else { + lp->media = SPD_DET; + lp->local_state = 0; + if (sr) { /* Success! */ + lp->tmp = MII_SR_ASSC; + anlpa = mii_rd(MII_ANLPA, lp->phy[lp->active].addr, DE4X5_MII); + ana = mii_rd(MII_ANA, lp->phy[lp->active].addr, DE4X5_MII); + if (!(anlpa & MII_ANLPA_RF) && + (cap = anlpa & MII_ANLPA_TAF & ana)) { + if (cap & MII_ANA_100M) { + lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_100M) ? TRUE : FALSE); + lp->media = _100Mb; + } else if (cap & MII_ANA_10M) { + lp->fdx = ((ana & anlpa & MII_ANA_FDAM & MII_ANA_10M) ? TRUE : FALSE); + lp->media = _10Mb; + } + } + } /* Auto Negotiation failed to finish */ + next_tick = dc2114x_autoconf(dev); + } /* Auto Negotiation failed to start */ + break; + } + break; + + case AUI: + if (!lp->tx_enable) { + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for AUI */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (!(inl(DE4X5_SISR) & SISR_SRA) && (lp->autosense == AUTO)) { + lp->media = BNC; + next_tick = dc2114x_autoconf(dev); + } else { + lp->local_state = 1; + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = AUI_SUSPECT; + next_tick = 3000; + } + break; + + case AUI_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, AUI, ping_media, dc2114x_autoconf); + break; + + case BNC: + switch (lp->local_state) { + case 0: + if (lp->timeout < 0) { + omr = inl(DE4X5_OMR); /* Set up half duplex for BNC */ + outl(omr & ~OMR_FDX, DE4X5_OMR); + } + irqs = 0; + irq_mask = 0; + sts = test_media(dev,irqs, irq_mask, 0, 0, 0, 1000); + if (sts < 0) { + next_tick = sts & ~TIMER_CB; + } else { + lp->local_state++; /* Ensure media connected */ + next_tick = dc2114x_autoconf(dev); + } + break; + + case 1: + if (!lp->tx_enable) { + if ((sts = ping_media(dev, 3000)) < 0) { + next_tick = sts & ~TIMER_CB; + } else { + if (sts) { + lp->local_state = 0; + lp->tcount++; + lp->media = INIT; + } else { + de4x5_init_connection(dev); + } + } + } else if (!lp->linkOK && (lp->autosense == AUTO)) { + lp->media = BNC_SUSPECT; + next_tick = 3000; + } + break; + } + break; + + case BNC_SUSPECT: + next_tick = de4x5_suspect_state(dev, 1000, BNC, ping_media, dc2114x_autoconf); + break; + + case SPD_DET: /* Choose 10Mb/s or 100Mb/s */ + if (srom_map_media(dev) < 0) { + lp->tcount++; + lp->media = INIT; + return next_tick; + } + if (lp->media == _100Mb) { + if ((slnk = test_for_100Mb(dev, 6500)) < 0) { + lp->media = SPD_DET; + return (slnk & ~TIMER_CB); + } + } else { + if (wait_for_link(dev) < 0) { + lp->media = SPD_DET; + return PDET_LINK_WAIT; + } + } + if (lp->media == ANS) { /* Do MII parallel detection */ + if (is_spd_100(dev)) { + lp->media = _100Mb; + } else { + lp->media = _10Mb; + } + next_tick = dc2114x_autoconf(dev); + } else if (((lp->media == _100Mb) && is_100_up(dev)) || + (((lp->media == _10Mb) || (lp->media == TP) || + (lp->media == BNC) || (lp->media == AUI)) && + is_10_up(dev))) { + next_tick = dc2114x_autoconf(dev); + } else { + lp->tcount++; + lp->media = INIT; + } + break; + + case _10Mb: + next_tick = 3000; + if (!lp->tx_enable) { + SET_10Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_10_up(dev) || (!lp->useSROM && is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + case _100Mb: + next_tick = 3000; + if (!lp->tx_enable) { + SET_100Mb; + de4x5_init_connection(dev); + } else { + if (!lp->linkOK && (lp->autosense == AUTO)) { + if (!is_100_up(dev) || (!lp->useSROM && !is_spd_100(dev))) { + lp->media = INIT; + lp->tcount++; + next_tick = DE4X5_AUTOSENSE_MS; + } + } + } + break; + + default: + lp->tcount++; +printk("Huh?: media:%02x\n", lp->media); + lp->media = INIT; + break; + } + + return next_tick; +} + +static int +srom_autoconf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + return lp->infoleaf_fn(dev); +} + +/* +** This mapping keeps the original media codes and FDX flag unchanged. +** While it isn't strictly necessary, it helps me for the moment... +** The early return avoids a media state / SROM media space clash. +*/ +static int +srom_map_media(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + lp->fdx = 0; + if (lp->infoblock_media == lp->media) + return 0; + + switch(lp->infoblock_media) { + case SROM_10BASETF: + if (!lp->params.fdx) return -1; + lp->fdx = TRUE; + case SROM_10BASET: + if (lp->params.fdx && !lp->fdx) return -1; + if ((lp->chipset == DC21140) || ((lp->chipset & ~0x00ff) == DC2114x)) { + lp->media = _10Mb; + } else { + lp->media = TP; + } + break; + + case SROM_10BASE2: + lp->media = BNC; + break; + + case SROM_10BASE5: + lp->media = AUI; + break; + + case SROM_100BASETF: + if (!lp->params.fdx) return -1; + lp->fdx = TRUE; + case SROM_100BASET: + if (lp->params.fdx && !lp->fdx) return -1; + lp->media = _100Mb; + break; + + case SROM_100BASET4: + lp->media = _100Mb; + break; + + case SROM_100BASEFF: + if (!lp->params.fdx) return -1; + lp->fdx = TRUE; + case SROM_100BASEF: + if (lp->params.fdx && !lp->fdx) return -1; + lp->media = _100Mb; + break; + + case ANS: + lp->media = ANS; + lp->fdx = lp->params.fdx; + break; + + default: + printk("%s: Bad media code [%d] detected in SROM!\n", dev->name, + lp->infoblock_media); + return -1; + break; + } + + return 0; +} + +static void +de4x5_init_connection(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_long flags = 0; + + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; /* Stop scrolling media messages */ + } + + spin_lock_irqsave(&lp->lock, flags); + de4x5_rst_desc_ring(dev); + de4x5_setup_intr(dev); + lp->tx_enable = YES; + spin_unlock_irqrestore(&lp->lock, flags); + outl(POLL_DEMAND, DE4X5_TPD); + + netif_wake_queue(dev); + + return; +} + +/* +** General PHY reset function. Some MII devices don't reset correctly +** since their MII address pins can float at voltages that are dependent +** on the signal pin use. Do a double reset to ensure a reset. +*/ +static int +de4x5_reset_phy(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int next_tick = 0; + + if ((lp->useSROM) || (lp->phy[lp->active].id)) { + if (lp->timeout < 0) { + if (lp->useSROM) { + if (lp->phy[lp->active].rst) { + srom_exec(dev, lp->phy[lp->active].rst); + srom_exec(dev, lp->phy[lp->active].rst); + } else if (lp->rst) { /* Type 5 infoblock reset */ + srom_exec(dev, lp->rst); + srom_exec(dev, lp->rst); + } + } else { + PHY_HARD_RESET; + } + if (lp->useMII) { + mii_wr(MII_CR_RST, MII_CR, lp->phy[lp->active].addr, DE4X5_MII); + } + } + if (lp->useMII) { + next_tick = test_mii_reg(dev, MII_CR, MII_CR_RST, FALSE, 500); + } + } else if (lp->chipset == DC21140) { + PHY_HARD_RESET; + } + + return next_tick; +} + +static int +test_media(struct net_device *dev, s32 irqs, s32 irq_mask, s32 csr13, s32 csr14, s32 csr15, s32 msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 sts, csr12; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + if (!lp->useSROM) { /* Already done if by SROM, else dc2104[01] */ + reset_init_sia(dev, csr13, csr14, csr15); + } + + /* set up the interrupt mask */ + outl(irq_mask, DE4X5_IMR); + + /* clear all pending interrupts */ + sts = inl(DE4X5_STS); + outl(sts, DE4X5_STS); + + /* clear csr12 NRA and SRA bits */ + if ((lp->chipset == DC21041) || lp->useSROM) { + csr12 = inl(DE4X5_SISR); + outl(csr12, DE4X5_SISR); + } + } + + sts = inl(DE4X5_STS) & ~TIMER_CB; + + if (!(sts & irqs) && --lp->timeout) { + sts = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return sts; +} + +static int +test_tp(struct net_device *dev, s32 msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int sisr; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + } + + sisr = (inl(DE4X5_SISR) & ~TIMER_CB) & (SISR_LKF | SISR_NCR); + + if (sisr && --lp->timeout) { + sisr = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return sisr; +} + +/* +** Samples the 100Mb Link State Signal. The sample interval is important +** because too fast a rate can give erroneous results and confuse the +** speed sense algorithm. +*/ +#define SAMPLE_INTERVAL 500 /* ms */ +#define SAMPLE_DELAY 2000 /* ms */ +static int +test_for_100Mb(struct net_device *dev, int msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + int gep = 0, ret = ((lp->chipset & ~0x00ff)==DC2114x? -1 :GEP_SLNK); + + if (lp->timeout < 0) { + if ((msec/SAMPLE_INTERVAL) <= 0) return 0; + if (msec > SAMPLE_DELAY) { + lp->timeout = (msec - SAMPLE_DELAY)/SAMPLE_INTERVAL; + gep = SAMPLE_DELAY | TIMER_CB; + return gep; + } else { + lp->timeout = msec/SAMPLE_INTERVAL; + } + } + + if (lp->phy[lp->active].id || lp->useSROM) { + gep = is_100_up(dev) | is_spd_100(dev); + } else { + gep = (~gep_rd(dev) & (GEP_SLNK | GEP_LNP)); + } + if (!(gep & ret) && --lp->timeout) { + gep = SAMPLE_INTERVAL | TIMER_CB; + } else { + lp->timeout = -1; + } + + return gep; +} + +static int +wait_for_link(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + if (lp->timeout < 0) { + lp->timeout = 1; + } + + if (lp->timeout--) { + return TIMER_CB; + } else { + lp->timeout = -1; + } + + return 0; +} + +/* +** +** +*/ +static int +test_mii_reg(struct net_device *dev, int reg, int mask, int pol, long msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + int test; + u_long iobase = dev->base_addr; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + } + + if (pol) pol = ~0; + reg = mii_rd((u_char)reg, lp->phy[lp->active].addr, DE4X5_MII) & mask; + test = (reg ^ pol) & mask; + + if (test && --lp->timeout) { + reg = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return reg; +} + +static int +is_spd_100(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int spd; + + if (lp->useMII) { + spd = mii_rd(lp->phy[lp->active].spd.reg, lp->phy[lp->active].addr, DE4X5_MII); + spd = ~(spd ^ lp->phy[lp->active].spd.value); + spd &= lp->phy[lp->active].spd.mask; + } else if (!lp->useSROM) { /* de500-xa */ + spd = ((~gep_rd(dev)) & GEP_SLNK); + } else { + if ((lp->ibn == 2) || !lp->asBitValid) + return ((lp->chipset == DC21143)?(~inl(DE4X5_SISR)&SISR_LS100):0); + + spd = (lp->asBitValid & (lp->asPolarity ^ (gep_rd(dev) & lp->asBit))) | + (lp->linkOK & ~lp->asBitValid); + } + + return spd; +} + +static int +is_100_up(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->useMII) { + /* Double read for sticky bits & temporary drops */ + mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); + return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS); + } else if (!lp->useSROM) { /* de500-xa */ + return ((~gep_rd(dev)) & GEP_SLNK); + } else { + if ((lp->ibn == 2) || !lp->asBitValid) + return ((lp->chipset == DC21143)?(~inl(DE4X5_SISR)&SISR_LS100):0); + + return ((lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) | + (lp->linkOK & ~lp->asBitValid)); + } +} + +static int +is_10_up(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->useMII) { + /* Double read for sticky bits & temporary drops */ + mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII); + return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII) & MII_SR_LKS); + } else if (!lp->useSROM) { /* de500-xa */ + return ((~gep_rd(dev)) & GEP_LNP); + } else { + if ((lp->ibn == 2) || !lp->asBitValid) + return (((lp->chipset & ~0x00ff) == DC2114x) ? + (~inl(DE4X5_SISR)&SISR_LS10): + 0); + + return ((lp->asBitValid&(lp->asPolarity^(gep_rd(dev)&lp->asBit))) | + (lp->linkOK & ~lp->asBitValid)); + } +} + +static int +is_anc_capable(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) { + return (mii_rd(MII_SR, lp->phy[lp->active].addr, DE4X5_MII)); + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + return (inl(DE4X5_SISR) & SISR_LPN) >> 12; + } else { + return 0; + } +} + +/* +** Send a packet onto the media and watch for send errors that indicate the +** media is bad or unconnected. +*/ +static int +ping_media(struct net_device *dev, int msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int sisr; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + + lp->tmp = lp->tx_new; /* Remember the ring position */ + load_packet(dev, lp->frame, TD_LS | TD_FS | sizeof(lp->frame), (struct sk_buff *)1); + lp->tx_new = (++lp->tx_new) % lp->txRingSize; + outl(POLL_DEMAND, DE4X5_TPD); + } + + sisr = inl(DE4X5_SISR); + + if ((!(sisr & SISR_NCR)) && + ((s32)le32_to_cpu(lp->tx_ring[lp->tmp].status) < 0) && + (--lp->timeout)) { + sisr = 100 | TIMER_CB; + } else { + if ((!(sisr & SISR_NCR)) && + !(le32_to_cpu(lp->tx_ring[lp->tmp].status) & (T_OWN | TD_ES)) && + lp->timeout) { + sisr = 0; + } else { + sisr = 1; + } + lp->timeout = -1; + } + + return sisr; +} + +/* +** This function does 2 things: on Intels it kmalloc's another buffer to +** replace the one about to be passed up. On Alpha's it kmallocs a buffer +** into which the packet is copied. +*/ +static struct sk_buff * +de4x5_alloc_rx_buff(struct net_device *dev, int index, int len) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct sk_buff *p; + +#if !defined(__alpha__) && !defined(__powerpc__) && !defined(__sparc_v9__) && !defined(DE4X5_DO_MEMCPY) + struct sk_buff *ret; + u_long i=0, tmp; + + p = dev_alloc_skb(IEEE802_3_SZ + DE4X5_ALIGN + 2); + if (!p) return NULL; + + p->dev = dev; + tmp = virt_to_bus(p->data); + i = ((tmp + DE4X5_ALIGN) & ~DE4X5_ALIGN) - tmp; + skb_reserve(p, i); + lp->rx_ring[index].buf = cpu_to_le32(tmp + i); + + ret = lp->rx_skb[index]; + lp->rx_skb[index] = p; + + if ((u_long) ret > 1) { + skb_put(ret, len); + } + + return ret; + +#else + if (lp->state != OPEN) return (struct sk_buff *)1; /* Fake out the open */ + + p = dev_alloc_skb(len + 2); + if (!p) return NULL; + + p->dev = dev; + skb_reserve(p, 2); /* Align */ + if (index < lp->rx_old) { /* Wrapped buffer */ + short tlen = (lp->rxRingSize - lp->rx_old) * RX_BUFF_SZ; + memcpy(skb_put(p,tlen),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,tlen); + memcpy(skb_put(p,len-tlen),lp->rx_bufs,len-tlen); + } else { /* Linear buffer */ + memcpy(skb_put(p,len),lp->rx_bufs + lp->rx_old * RX_BUFF_SZ,len); + } + + return p; +#endif +} + +static void +de4x5_free_rx_buffs(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + for (i=0; i<lp->rxRingSize; i++) { + if ((u_long) lp->rx_skb[i] > 1) { + dev_kfree_skb(lp->rx_skb[i]); + } + lp->rx_ring[i].status = 0; + lp->rx_skb[i] = (struct sk_buff *)1; /* Dummy entry */ + } + + return; +} + +static void +de4x5_free_tx_buffs(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + for (i=0; i<lp->txRingSize; i++) { + if (lp->tx_skb[i]) + de4x5_free_tx_buff(lp, i); + lp->tx_ring[i].status = 0; + } + + /* Unload the locally queued packets */ + while (lp->cache.skb) { + dev_kfree_skb(de4x5_get_cache(dev)); + } + + return; +} + +/* +** When a user pulls a connection, the DECchip can end up in a +** 'running - waiting for end of transmission' state. This means that we +** have to perform a chip soft reset to ensure that we can synchronize +** the hardware and software and make any media probes using a loopback +** packet meaningful. +*/ +static void +de4x5_save_skbs(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 omr; + + if (!lp->cache.save_cnt) { + STOP_DE4X5; + de4x5_tx(dev); /* Flush any sent skb's */ + de4x5_free_tx_buffs(dev); + de4x5_cache_state(dev, DE4X5_SAVE_STATE); + de4x5_sw_reset(dev); + de4x5_cache_state(dev, DE4X5_RESTORE_STATE); + lp->cache.save_cnt++; + START_DE4X5; + } + + return; +} + +static void +de4x5_rst_desc_ring(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i; + s32 omr; + + if (lp->cache.save_cnt) { + STOP_DE4X5; + outl(lp->dma_rings, DE4X5_RRBA); + outl(lp->dma_rings + NUM_RX_DESC * sizeof(struct de4x5_desc), + DE4X5_TRBA); + + lp->rx_new = lp->rx_old = 0; + lp->tx_new = lp->tx_old = 0; + + for (i = 0; i < lp->rxRingSize; i++) { + lp->rx_ring[i].status = cpu_to_le32(R_OWN); + } + + for (i = 0; i < lp->txRingSize; i++) { + lp->tx_ring[i].status = cpu_to_le32(0); + } + + barrier(); + lp->cache.save_cnt--; + START_DE4X5; + } + + return; +} + +static void +de4x5_cache_state(struct net_device *dev, int flag) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + switch(flag) { + case DE4X5_SAVE_STATE: + lp->cache.csr0 = inl(DE4X5_BMR); + lp->cache.csr6 = (inl(DE4X5_OMR) & ~(OMR_ST | OMR_SR)); + lp->cache.csr7 = inl(DE4X5_IMR); + break; + + case DE4X5_RESTORE_STATE: + outl(lp->cache.csr0, DE4X5_BMR); + outl(lp->cache.csr6, DE4X5_OMR); + outl(lp->cache.csr7, DE4X5_IMR); + if (lp->chipset == DC21140) { + gep_wr(lp->cache.gepc, dev); + gep_wr(lp->cache.gep, dev); + } else { + reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, + lp->cache.csr15); + } + break; + } + + return; +} + +static void +de4x5_put_cache(struct net_device *dev, struct sk_buff *skb) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct sk_buff *p; + + if (lp->cache.skb) { + for (p=lp->cache.skb; p->next; p=p->next); + p->next = skb; + } else { + lp->cache.skb = skb; + } + skb->next = NULL; + + return; +} + +static void +de4x5_putb_cache(struct net_device *dev, struct sk_buff *skb) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct sk_buff *p = lp->cache.skb; + + lp->cache.skb = skb; + skb->next = p; + + return; +} + +static struct sk_buff * +de4x5_get_cache(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct sk_buff *p = lp->cache.skb; + + if (p) { + lp->cache.skb = p->next; + p->next = NULL; + } + + return p; +} + +/* +** Check the Auto Negotiation State. Return OK when a link pass interrupt +** is received and the auto-negotiation status is NWAY OK. +*/ +static int +test_ans(struct net_device *dev, s32 irqs, s32 irq_mask, s32 msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 sts, ans; + + if (lp->timeout < 0) { + lp->timeout = msec/100; + outl(irq_mask, DE4X5_IMR); + + /* clear all pending interrupts */ + sts = inl(DE4X5_STS); + outl(sts, DE4X5_STS); + } + + ans = inl(DE4X5_SISR) & SISR_ANS; + sts = inl(DE4X5_STS) & ~TIMER_CB; + + if (!(sts & irqs) && (ans ^ ANS_NWOK) && --lp->timeout) { + sts = 100 | TIMER_CB; + } else { + lp->timeout = -1; + } + + return sts; +} + +static void +de4x5_setup_intr(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 imr, sts; + + if (inl(DE4X5_OMR) & OMR_SR) { /* Only unmask if TX/RX is enabled */ + imr = 0; + UNMASK_IRQs; + sts = inl(DE4X5_STS); /* Reset any pending (stale) interrupts */ + outl(sts, DE4X5_STS); + ENABLE_IRQs; + } + + return; +} + +/* +** +*/ +static void +reset_init_sia(struct net_device *dev, s32 csr13, s32 csr14, s32 csr15) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + RESET_SIA; + if (lp->useSROM) { + if (lp->ibn == 3) { + srom_exec(dev, lp->phy[lp->active].rst); + srom_exec(dev, lp->phy[lp->active].gep); + outl(1, DE4X5_SICR); + return; + } else { + csr15 = lp->cache.csr15; + csr14 = lp->cache.csr14; + csr13 = lp->cache.csr13; + outl(csr15 | lp->cache.gepc, DE4X5_SIGR); + outl(csr15 | lp->cache.gep, DE4X5_SIGR); + } + } else { + outl(csr15, DE4X5_SIGR); + } + outl(csr14, DE4X5_STRR); + outl(csr13, DE4X5_SICR); + + mdelay(10); + + return; +} + +/* +** Create a loopback ethernet packet +*/ +static void +create_packet(struct net_device *dev, char *frame, int len) +{ + int i; + char *buf = frame; + + for (i=0; i<ETH_ALEN; i++) { /* Use this source address */ + *buf++ = dev->dev_addr[i]; + } + for (i=0; i<ETH_ALEN; i++) { /* Use this destination address */ + *buf++ = dev->dev_addr[i]; + } + + *buf++ = 0; /* Packet length (2 bytes) */ + *buf++ = 1; + + return; +} + +/* +** Look for a particular board name in the EISA configuration space +*/ +static int +EISA_signature(char *name, struct device *device) +{ + int i, status = 0, siglen = sizeof(de4x5_signatures)/sizeof(c_char *); + struct eisa_device *edev; + + *name = '\0'; + edev = to_eisa_device (device); + i = edev->id.driver_data; + + if (i >= 0 && i < siglen) { + strcpy (name, de4x5_signatures[i]); + status = 1; + } + + return status; /* return the device name string */ +} + +/* +** Look for a particular board name in the PCI configuration space +*/ +static int +PCI_signature(char *name, struct de4x5_private *lp) +{ + int i, status = 0, siglen = sizeof(de4x5_signatures)/sizeof(c_char *); + + if (lp->chipset == DC21040) { + strcpy(name, "DE434/5"); + return status; + } else { /* Search for a DEC name in the SROM */ + int i = *((char *)&lp->srom + 19) * 3; + strncpy(name, (char *)&lp->srom + 26 + i, 8); + } + name[8] = '\0'; + for (i=0; i<siglen; i++) { + if (strstr(name,de4x5_signatures[i])!=NULL) break; + } + if (i == siglen) { + if (dec_only) { + *name = '\0'; + } else { /* Use chip name to avoid confusion */ + strcpy(name, (((lp->chipset == DC21040) ? "DC21040" : + ((lp->chipset == DC21041) ? "DC21041" : + ((lp->chipset == DC21140) ? "DC21140" : + ((lp->chipset == DC21142) ? "DC21142" : + ((lp->chipset == DC21143) ? "DC21143" : "UNKNOWN" + ))))))); + } + if (lp->chipset != DC21041) { + lp->useSROM = TRUE; /* card is not recognisably DEC */ + } + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + lp->useSROM = TRUE; + } + + return status; +} + +/* +** Set up the Ethernet PROM counter to the start of the Ethernet address on +** the DC21040, else read the SROM for the other chips. +** The SROM may not be present in a multi-MAC card, so first read the +** MAC address and check for a bad address. If there is a bad one then exit +** immediately with the prior srom contents intact (the h/w address will +** be fixed up later). +*/ +static void +DevicePresent(struct net_device *dev, u_long aprom_addr) +{ + int i, j=0; + struct de4x5_private *lp = netdev_priv(dev); + + if (lp->chipset == DC21040) { + if (lp->bus == EISA) { + enet_addr_rst(aprom_addr); /* Reset Ethernet Address ROM Pointer */ + } else { + outl(0, aprom_addr); /* Reset Ethernet Address ROM Pointer */ + } + } else { /* Read new srom */ + u_short tmp, *p = (short *)((char *)&lp->srom + SROM_HWADD); + for (i=0; i<(ETH_ALEN>>1); i++) { + tmp = srom_rd(aprom_addr, (SROM_HWADD>>1) + i); + *p = le16_to_cpu(tmp); + j += *p++; + } + if ((j == 0) || (j == 0x2fffd)) { + return; + } + + p=(short *)&lp->srom; + for (i=0; i<(sizeof(struct de4x5_srom)>>1); i++) { + tmp = srom_rd(aprom_addr, i); + *p++ = le16_to_cpu(tmp); + } + de4x5_dbg_srom((struct de4x5_srom *)&lp->srom); + } + + return; +} + +/* +** Since the write on the Enet PROM register doesn't seem to reset the PROM +** pointer correctly (at least on my DE425 EISA card), this routine should do +** it...from depca.c. +*/ +static void +enet_addr_rst(u_long aprom_addr) +{ + union { + struct { + u32 a; + u32 b; + } llsig; + char Sig[sizeof(u32) << 1]; + } dev; + short sigLength=0; + s8 data; + int i, j; + + dev.llsig.a = ETH_PROM_SIG; + dev.llsig.b = ETH_PROM_SIG; + sigLength = sizeof(u32) << 1; + + for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) { + data = inb(aprom_addr); + if (dev.Sig[j] == data) { /* track signature */ + j++; + } else { /* lost signature; begin search again */ + if (data == dev.Sig[0]) { /* rare case.... */ + j=1; + } else { + j=0; + } + } + } + + return; +} + +/* +** For the bad status case and no SROM, then add one to the previous +** address. However, need to add one backwards in case we have 0xff +** as one or more of the bytes. Only the last 3 bytes should be checked +** as the first three are invariant - assigned to an organisation. +*/ +static int +get_hw_addr(struct net_device *dev) +{ + u_long iobase = dev->base_addr; + int broken, i, k, tmp, status = 0; + u_short j,chksum; + struct de4x5_private *lp = netdev_priv(dev); + + broken = de4x5_bad_srom(lp); + + for (i=0,k=0,j=0;j<3;j++) { + k <<= 1; + if (k > 0xffff) k-=0xffff; + + if (lp->bus == PCI) { + if (lp->chipset == DC21040) { + while ((tmp = inl(DE4X5_APROM)) < 0); + k += (u_char) tmp; + dev->dev_addr[i++] = (u_char) tmp; + while ((tmp = inl(DE4X5_APROM)) < 0); + k += (u_short) (tmp << 8); + dev->dev_addr[i++] = (u_char) tmp; + } else if (!broken) { + dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++; + dev->dev_addr[i] = (u_char) lp->srom.ieee_addr[i]; i++; + } else if ((broken == SMC) || (broken == ACCTON)) { + dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++; + dev->dev_addr[i] = *((u_char *)&lp->srom + i); i++; + } + } else { + k += (u_char) (tmp = inb(EISA_APROM)); + dev->dev_addr[i++] = (u_char) tmp; + k += (u_short) ((tmp = inb(EISA_APROM)) << 8); + dev->dev_addr[i++] = (u_char) tmp; + } + + if (k > 0xffff) k-=0xffff; + } + if (k == 0xffff) k=0; + + if (lp->bus == PCI) { + if (lp->chipset == DC21040) { + while ((tmp = inl(DE4X5_APROM)) < 0); + chksum = (u_char) tmp; + while ((tmp = inl(DE4X5_APROM)) < 0); + chksum |= (u_short) (tmp << 8); + if ((k != chksum) && (dec_only)) status = -1; + } + } else { + chksum = (u_char) inb(EISA_APROM); + chksum |= (u_short) (inb(EISA_APROM) << 8); + if ((k != chksum) && (dec_only)) status = -1; + } + + /* If possible, try to fix a broken card - SMC only so far */ + srom_repair(dev, broken); + +#ifdef CONFIG_PPC_MULTIPLATFORM + /* + ** If the address starts with 00 a0, we have to bit-reverse + ** each byte of the address. + */ + if ( (_machine & _MACH_Pmac) && + (dev->dev_addr[0] == 0) && + (dev->dev_addr[1] == 0xa0) ) + { + for (i = 0; i < ETH_ALEN; ++i) + { + int x = dev->dev_addr[i]; + x = ((x & 0xf) << 4) + ((x & 0xf0) >> 4); + x = ((x & 0x33) << 2) + ((x & 0xcc) >> 2); + dev->dev_addr[i] = ((x & 0x55) << 1) + ((x & 0xaa) >> 1); + } + } +#endif /* CONFIG_PPC_MULTIPLATFORM */ + + /* Test for a bad enet address */ + status = test_bad_enet(dev, status); + + return status; +} + +/* +** Test for enet addresses in the first 32 bytes. The built-in strncmp +** didn't seem to work here...? +*/ +static int +de4x5_bad_srom(struct de4x5_private *lp) +{ + int i, status = 0; + + for (i=0; i<sizeof(enet_det)/ETH_ALEN; i++) { + if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) && + !de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) { + if (i == 0) { + status = SMC; + } else if (i == 1) { + status = ACCTON; + } + break; + } + } + + return status; +} + +static int +de4x5_strncmp(char *a, char *b, int n) +{ + int ret=0; + + for (;n && !ret;n--) { + ret = *a++ - *b++; + } + + return ret; +} + +static void +srom_repair(struct net_device *dev, int card) +{ + struct de4x5_private *lp = netdev_priv(dev); + + switch(card) { + case SMC: + memset((char *)&lp->srom, 0, sizeof(struct de4x5_srom)); + memcpy(lp->srom.ieee_addr, (char *)dev->dev_addr, ETH_ALEN); + memcpy(lp->srom.info, (char *)&srom_repair_info[SMC-1], 100); + lp->useSROM = TRUE; + break; + } + + return; +} + +/* +** Assume that the irq's do not follow the PCI spec - this is seems +** to be true so far (2 for 2). +*/ +static int +test_bad_enet(struct net_device *dev, int status) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i, tmp; + + for (tmp=0,i=0; i<ETH_ALEN; i++) tmp += (u_char)dev->dev_addr[i]; + if ((tmp == 0) || (tmp == 0x5fa)) { + if ((lp->chipset == last.chipset) && + (lp->bus_num == last.bus) && (lp->bus_num > 0)) { + for (i=0; i<ETH_ALEN; i++) dev->dev_addr[i] = last.addr[i]; + for (i=ETH_ALEN-1; i>2; --i) { + dev->dev_addr[i] += 1; + if (dev->dev_addr[i] != 0) break; + } + for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i]; + if (!an_exception(lp)) { + dev->irq = last.irq; + } + + status = 0; + } + } else if (!status) { + last.chipset = lp->chipset; + last.bus = lp->bus_num; + last.irq = dev->irq; + for (i=0; i<ETH_ALEN; i++) last.addr[i] = dev->dev_addr[i]; + } + + return status; +} + +/* +** List of board exceptions with correctly wired IRQs +*/ +static int +an_exception(struct de4x5_private *lp) +{ + if ((*(u_short *)lp->srom.sub_vendor_id == 0x00c0) && + (*(u_short *)lp->srom.sub_system_id == 0x95e0)) { + return -1; + } + + return 0; +} + +/* +** SROM Read +*/ +static short +srom_rd(u_long addr, u_char offset) +{ + sendto_srom(SROM_RD | SROM_SR, addr); + + srom_latch(SROM_RD | SROM_SR | DT_CS, addr); + srom_command(SROM_RD | SROM_SR | DT_IN | DT_CS, addr); + srom_address(SROM_RD | SROM_SR | DT_CS, addr, offset); + + return srom_data(SROM_RD | SROM_SR | DT_CS, addr); +} + +static void +srom_latch(u_int command, u_long addr) +{ + sendto_srom(command, addr); + sendto_srom(command | DT_CLK, addr); + sendto_srom(command, addr); + + return; +} + +static void +srom_command(u_int command, u_long addr) +{ + srom_latch(command, addr); + srom_latch(command, addr); + srom_latch((command & 0x0000ff00) | DT_CS, addr); + + return; +} + +static void +srom_address(u_int command, u_long addr, u_char offset) +{ + int i, a; + + a = offset << 2; + for (i=0; i<6; i++, a <<= 1) { + srom_latch(command | ((a & 0x80) ? DT_IN : 0), addr); + } + udelay(1); + + i = (getfrom_srom(addr) >> 3) & 0x01; + + return; +} + +static short +srom_data(u_int command, u_long addr) +{ + int i; + short word = 0; + s32 tmp; + + for (i=0; i<16; i++) { + sendto_srom(command | DT_CLK, addr); + tmp = getfrom_srom(addr); + sendto_srom(command, addr); + + word = (word << 1) | ((tmp >> 3) & 0x01); + } + + sendto_srom(command & 0x0000ff00, addr); + + return word; +} + +/* +static void +srom_busy(u_int command, u_long addr) +{ + sendto_srom((command & 0x0000ff00) | DT_CS, addr); + + while (!((getfrom_srom(addr) >> 3) & 0x01)) { + mdelay(1); + } + + sendto_srom(command & 0x0000ff00, addr); + + return; +} +*/ + +static void +sendto_srom(u_int command, u_long addr) +{ + outl(command, addr); + udelay(1); + + return; +} + +static int +getfrom_srom(u_long addr) +{ + s32 tmp; + + tmp = inl(addr); + udelay(1); + + return tmp; +} + +static int +srom_infoleaf_info(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i, count; + u_char *p; + + /* Find the infoleaf decoder function that matches this chipset */ + for (i=0; i<INFOLEAF_SIZE; i++) { + if (lp->chipset == infoleaf_array[i].chipset) break; + } + if (i == INFOLEAF_SIZE) { + lp->useSROM = FALSE; + printk("%s: Cannot find correct chipset for SROM decoding!\n", + dev->name); + return -ENXIO; + } + + lp->infoleaf_fn = infoleaf_array[i].fn; + + /* Find the information offset that this function should use */ + count = *((u_char *)&lp->srom + 19); + p = (u_char *)&lp->srom + 26; + + if (count > 1) { + for (i=count; i; --i, p+=3) { + if (lp->device == *p) break; + } + if (i == 0) { + lp->useSROM = FALSE; + printk("%s: Cannot find correct PCI device [%d] for SROM decoding!\n", + dev->name, lp->device); + return -ENXIO; + } + } + + lp->infoleaf_offset = TWIDDLE(p+1); + + return 0; +} + +/* +** This routine loads any type 1 or 3 MII info into the mii device +** struct and executes any type 5 code to reset PHY devices for this +** controller. +** The info for the MII devices will be valid since the index used +** will follow the discovery process from MII address 1-31 then 0. +*/ +static void +srom_init(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + u_char count; + + p+=2; + if (lp->chipset == DC21140) { + lp->cache.gepc = (*p++ | GEP_CTRL); + gep_wr(lp->cache.gepc, dev); + } + + /* Block count */ + count = *p++; + + /* Jump the infoblocks to find types */ + for (;count; --count) { + if (*p < 128) { + p += COMPACT_LEN; + } else if (*(p+1) == 5) { + type5_infoblock(dev, 1, p); + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 4) { + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 3) { + type3_infoblock(dev, 1, p); + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 2) { + p += ((*p & BLOCK_LEN) + 1); + } else if (*(p+1) == 1) { + type1_infoblock(dev, 1, p); + p += ((*p & BLOCK_LEN) + 1); + } else { + p += ((*p & BLOCK_LEN) + 1); + } + } + + return; +} + +/* +** A generic routine that writes GEP control, data and reset information +** to the GEP register (21140) or csr15 GEP portion (2114[23]). +*/ +static void +srom_exec(struct net_device *dev, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + u_char count = (p ? *p++ : 0); + u_short *w = (u_short *)p; + + if (((lp->ibn != 1) && (lp->ibn != 3) && (lp->ibn != 5)) || !count) return; + + if (lp->chipset != DC21140) RESET_SIA; + + while (count--) { + gep_wr(((lp->chipset==DC21140) && (lp->ibn!=5) ? + *p++ : TWIDDLE(w++)), dev); + mdelay(2); /* 2ms per action */ + } + + if (lp->chipset != DC21140) { + outl(lp->cache.csr14, DE4X5_STRR); + outl(lp->cache.csr13, DE4X5_SICR); + } + + return; +} + +/* +** Basically this function is a NOP since it will never be called, +** unless I implement the DC21041 SROM functions. There's no need +** since the existing code will be satisfactory for all boards. +*/ +static int +dc21041_infoleaf(struct net_device *dev) +{ + return DE4X5_AUTOSENSE_MS; +} + +static int +dc21140_infoleaf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char count = 0; + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + int next_tick = DE4X5_AUTOSENSE_MS; + + /* Read the connection type */ + p+=2; + + /* GEP control */ + lp->cache.gepc = (*p++ | GEP_CTRL); + + /* Block count */ + count = *p++; + + /* Recursively figure out the info blocks */ + if (*p < 128) { + next_tick = dc_infoblock[COMPACT](dev, count, p); + } else { + next_tick = dc_infoblock[*(p+1)](dev, count, p); + } + + if (lp->tcount == count) { + lp->media = NC; + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tcount = 0; + lp->tx_enable = FALSE; + } + + return next_tick & ~TIMER_CB; +} + +static int +dc21142_infoleaf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char count = 0; + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + int next_tick = DE4X5_AUTOSENSE_MS; + + /* Read the connection type */ + p+=2; + + /* Block count */ + count = *p++; + + /* Recursively figure out the info blocks */ + if (*p < 128) { + next_tick = dc_infoblock[COMPACT](dev, count, p); + } else { + next_tick = dc_infoblock[*(p+1)](dev, count, p); + } + + if (lp->tcount == count) { + lp->media = NC; + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tcount = 0; + lp->tx_enable = FALSE; + } + + return next_tick & ~TIMER_CB; +} + +static int +dc21143_infoleaf(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char count = 0; + u_char *p = (u_char *)&lp->srom + lp->infoleaf_offset; + int next_tick = DE4X5_AUTOSENSE_MS; + + /* Read the connection type */ + p+=2; + + /* Block count */ + count = *p++; + + /* Recursively figure out the info blocks */ + if (*p < 128) { + next_tick = dc_infoblock[COMPACT](dev, count, p); + } else { + next_tick = dc_infoblock[*(p+1)](dev, count, p); + } + if (lp->tcount == count) { + lp->media = NC; + if (lp->media != lp->c_media) { + de4x5_dbg_media(dev); + lp->c_media = lp->media; + } + lp->media = INIT; + lp->tcount = 0; + lp->tx_enable = FALSE; + } + + return next_tick & ~TIMER_CB; +} + +/* +** The compact infoblock is only designed for DC21140[A] chips, so +** we'll reuse the dc21140m_autoconf function. Non MII media only. +*/ +static int +compact_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char flags, csr6; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+COMPACT_LEN) < 128) { + return dc_infoblock[COMPACT](dev, count, p+COMPACT_LEN); + } else { + return dc_infoblock[*(p+COMPACT_LEN+1)](dev, count, p+COMPACT_LEN); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = COMPACT; + lp->active = 0; + gep_wr(lp->cache.gepc, dev); + lp->infoblock_media = (*p++) & COMPACT_MC; + lp->cache.gep = *p++; + csr6 = *p++; + flags = *p++; + + lp->asBitValid = (flags & 0x80) ? 0 : -1; + lp->defMedium = (flags & 0x40) ? -1 : 0; + lp->asBit = 1 << ((csr6 >> 1) & 0x07); + lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; + lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); + lp->useMII = FALSE; + + de4x5_switch_mac_port(dev); + } + + return dc21140m_autoconf(dev); +} + +/* +** This block describes non MII media for the DC21140[A] only. +*/ +static int +type0_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char flags, csr6, len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 0; + lp->active = 0; + gep_wr(lp->cache.gepc, dev); + p+=2; + lp->infoblock_media = (*p++) & BLOCK0_MC; + lp->cache.gep = *p++; + csr6 = *p++; + flags = *p++; + + lp->asBitValid = (flags & 0x80) ? 0 : -1; + lp->defMedium = (flags & 0x40) ? -1 : 0; + lp->asBit = 1 << ((csr6 >> 1) & 0x07); + lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; + lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); + lp->useMII = FALSE; + + de4x5_switch_mac_port(dev); + } + + return dc21140m_autoconf(dev); +} + +/* These functions are under construction! */ + +static int +type1_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + p += 2; + if (lp->state == INITIALISED) { + lp->ibn = 1; + lp->active = *p++; + lp->phy[lp->active].gep = (*p ? p : NULL); p += (*p + 1); + lp->phy[lp->active].rst = (*p ? p : NULL); p += (*p + 1); + lp->phy[lp->active].mc = TWIDDLE(p); p += 2; + lp->phy[lp->active].ana = TWIDDLE(p); p += 2; + lp->phy[lp->active].fdx = TWIDDLE(p); p += 2; + lp->phy[lp->active].ttm = TWIDDLE(p); + return 0; + } else if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 1; + lp->active = *p; + lp->infoblock_csr6 = OMR_MII_100; + lp->useMII = TRUE; + lp->infoblock_media = ANS; + + de4x5_switch_mac_port(dev); + } + + return dc21140m_autoconf(dev); +} + +static int +type2_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 2; + lp->active = 0; + p += 2; + lp->infoblock_media = (*p) & MEDIA_CODE; + + if ((*p++) & EXT_FIELD) { + lp->cache.csr13 = TWIDDLE(p); p += 2; + lp->cache.csr14 = TWIDDLE(p); p += 2; + lp->cache.csr15 = TWIDDLE(p); p += 2; + } else { + lp->cache.csr13 = CSR13; + lp->cache.csr14 = CSR14; + lp->cache.csr15 = CSR15; + } + lp->cache.gepc = ((s32)(TWIDDLE(p)) << 16); p += 2; + lp->cache.gep = ((s32)(TWIDDLE(p)) << 16); + lp->infoblock_csr6 = OMR_SIA; + lp->useMII = FALSE; + + de4x5_switch_mac_port(dev); + } + + return dc2114x_autoconf(dev); +} + +static int +type3_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + p += 2; + if (lp->state == INITIALISED) { + lp->ibn = 3; + lp->active = *p++; + if (MOTO_SROM_BUG) lp->active = 0; + lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); + lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); + lp->phy[lp->active].mc = TWIDDLE(p); p += 2; + lp->phy[lp->active].ana = TWIDDLE(p); p += 2; + lp->phy[lp->active].fdx = TWIDDLE(p); p += 2; + lp->phy[lp->active].ttm = TWIDDLE(p); p += 2; + lp->phy[lp->active].mci = *p; + return 0; + } else if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 3; + lp->active = *p; + if (MOTO_SROM_BUG) lp->active = 0; + lp->infoblock_csr6 = OMR_MII_100; + lp->useMII = TRUE; + lp->infoblock_media = ANS; + + de4x5_switch_mac_port(dev); + } + + return dc2114x_autoconf(dev); +} + +static int +type4_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char flags, csr6, len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + if ((lp->media == INIT) && (lp->timeout < 0)) { + lp->ibn = 4; + lp->active = 0; + p+=2; + lp->infoblock_media = (*p++) & MEDIA_CODE; + lp->cache.csr13 = CSR13; /* Hard coded defaults */ + lp->cache.csr14 = CSR14; + lp->cache.csr15 = CSR15; + lp->cache.gepc = ((s32)(TWIDDLE(p)) << 16); p += 2; + lp->cache.gep = ((s32)(TWIDDLE(p)) << 16); p += 2; + csr6 = *p++; + flags = *p++; + + lp->asBitValid = (flags & 0x80) ? 0 : -1; + lp->defMedium = (flags & 0x40) ? -1 : 0; + lp->asBit = 1 << ((csr6 >> 1) & 0x07); + lp->asPolarity = ((csr6 & 0x80) ? -1 : 0) & lp->asBit; + lp->infoblock_csr6 = OMR_DEF | ((csr6 & 0x71) << 18); + lp->useMII = FALSE; + + de4x5_switch_mac_port(dev); + } + + return dc2114x_autoconf(dev); +} + +/* +** This block type provides information for resetting external devices +** (chips) through the General Purpose Register. +*/ +static int +type5_infoblock(struct net_device *dev, u_char count, u_char *p) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_char len = (*p & BLOCK_LEN)+1; + + /* Recursively figure out the info blocks */ + if (--count > lp->tcount) { + if (*(p+len) < 128) { + return dc_infoblock[COMPACT](dev, count, p+len); + } else { + return dc_infoblock[*(p+len+1)](dev, count, p+len); + } + } + + /* Must be initializing to run this code */ + if ((lp->state == INITIALISED) || (lp->media == INIT)) { + p+=2; + lp->rst = p; + srom_exec(dev, lp->rst); + } + + return DE4X5_AUTOSENSE_MS; +} + +/* +** MII Read/Write +*/ + +static int +mii_rd(u_char phyreg, u_char phyaddr, u_long ioaddr) +{ + mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */ + mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */ + mii_wdata(MII_STRD, 4, ioaddr); /* SFD and Read operation */ + mii_address(phyaddr, ioaddr); /* PHY address to be accessed */ + mii_address(phyreg, ioaddr); /* PHY Register to read */ + mii_ta(MII_STRD, ioaddr); /* Turn around time - 2 MDC */ + + return mii_rdata(ioaddr); /* Read data */ +} + +static void +mii_wr(int data, u_char phyreg, u_char phyaddr, u_long ioaddr) +{ + mii_wdata(MII_PREAMBLE, 2, ioaddr); /* Start of 34 bit preamble... */ + mii_wdata(MII_PREAMBLE, 32, ioaddr); /* ...continued */ + mii_wdata(MII_STWR, 4, ioaddr); /* SFD and Write operation */ + mii_address(phyaddr, ioaddr); /* PHY address to be accessed */ + mii_address(phyreg, ioaddr); /* PHY Register to write */ + mii_ta(MII_STWR, ioaddr); /* Turn around time - 2 MDC */ + data = mii_swap(data, 16); /* Swap data bit ordering */ + mii_wdata(data, 16, ioaddr); /* Write data */ + + return; +} + +static int +mii_rdata(u_long ioaddr) +{ + int i; + s32 tmp = 0; + + for (i=0; i<16; i++) { + tmp <<= 1; + tmp |= getfrom_mii(MII_MRD | MII_RD, ioaddr); + } + + return tmp; +} + +static void +mii_wdata(int data, int len, u_long ioaddr) +{ + int i; + + for (i=0; i<len; i++) { + sendto_mii(MII_MWR | MII_WR, data, ioaddr); + data >>= 1; + } + + return; +} + +static void +mii_address(u_char addr, u_long ioaddr) +{ + int i; + + addr = mii_swap(addr, 5); + for (i=0; i<5; i++) { + sendto_mii(MII_MWR | MII_WR, addr, ioaddr); + addr >>= 1; + } + + return; +} + +static void +mii_ta(u_long rw, u_long ioaddr) +{ + if (rw == MII_STWR) { + sendto_mii(MII_MWR | MII_WR, 1, ioaddr); + sendto_mii(MII_MWR | MII_WR, 0, ioaddr); + } else { + getfrom_mii(MII_MRD | MII_RD, ioaddr); /* Tri-state MDIO */ + } + + return; +} + +static int +mii_swap(int data, int len) +{ + int i, tmp = 0; + + for (i=0; i<len; i++) { + tmp <<= 1; + tmp |= (data & 1); + data >>= 1; + } + + return tmp; +} + +static void +sendto_mii(u32 command, int data, u_long ioaddr) +{ + u32 j; + + j = (data & 1) << 17; + outl(command | j, ioaddr); + udelay(1); + outl(command | MII_MDC | j, ioaddr); + udelay(1); + + return; +} + +static int +getfrom_mii(u32 command, u_long ioaddr) +{ + outl(command, ioaddr); + udelay(1); + outl(command | MII_MDC, ioaddr); + udelay(1); + + return ((inl(ioaddr) >> 19) & 1); +} + +/* +** Here's 3 ways to calculate the OUI from the ID registers. +*/ +static int +mii_get_oui(u_char phyaddr, u_long ioaddr) +{ +/* + union { + u_short reg; + u_char breg[2]; + } a; + int i, r2, r3, ret=0;*/ + int r2, r3; + + /* Read r2 and r3 */ + r2 = mii_rd(MII_ID0, phyaddr, ioaddr); + r3 = mii_rd(MII_ID1, phyaddr, ioaddr); + /* SEEQ and Cypress way * / + / * Shuffle r2 and r3 * / + a.reg=0; + r3 = ((r3>>10)|(r2<<6))&0x0ff; + r2 = ((r2>>2)&0x3fff); + + / * Bit reverse r3 * / + for (i=0;i<8;i++) { + ret<<=1; + ret |= (r3&1); + r3>>=1; + } + + / * Bit reverse r2 * / + for (i=0;i<16;i++) { + a.reg<<=1; + a.reg |= (r2&1); + r2>>=1; + } + + / * Swap r2 bytes * / + i=a.breg[0]; + a.breg[0]=a.breg[1]; + a.breg[1]=i; + + return ((a.reg<<8)|ret); */ /* SEEQ and Cypress way */ +/* return ((r2<<6)|(u_int)(r3>>10)); */ /* NATIONAL and BROADCOM way */ + return r2; /* (I did it) My way */ +} + +/* +** The SROM spec forces us to search addresses [1-31 0]. Bummer. +*/ +static int +mii_get_phy(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + int i, j, k, n, limit=sizeof(phy_info)/sizeof(struct phy_table); + int id; + + lp->active = 0; + lp->useMII = TRUE; + + /* Search the MII address space for possible PHY devices */ + for (n=0, lp->mii_cnt=0, i=1; !((i==1) && (n==1)); i=(i+1)%DE4X5_MAX_MII) { + lp->phy[lp->active].addr = i; + if (i==0) n++; /* Count cycles */ + while (de4x5_reset_phy(dev)<0) udelay(100);/* Wait for reset */ + id = mii_get_oui(i, DE4X5_MII); + if ((id == 0) || (id == 65535)) continue; /* Valid ID? */ + for (j=0; j<limit; j++) { /* Search PHY table */ + if (id != phy_info[j].id) continue; /* ID match? */ + for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++); + if (k < DE4X5_MAX_PHY) { + memcpy((char *)&lp->phy[k], + (char *)&phy_info[j], sizeof(struct phy_table)); + lp->phy[k].addr = i; + lp->mii_cnt++; + lp->active++; + } else { + goto purgatory; /* Stop the search */ + } + break; + } + if ((j == limit) && (i < DE4X5_MAX_MII)) { + for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++); + lp->phy[k].addr = i; + lp->phy[k].id = id; + lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */ + lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */ + lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */ + lp->mii_cnt++; + lp->active++; + printk("%s: Using generic MII device control. If the board doesn't operate, \nplease mail the following dump to the author:\n", dev->name); + j = de4x5_debug; + de4x5_debug |= DEBUG_MII; + de4x5_dbg_mii(dev, k); + de4x5_debug = j; + printk("\n"); + } + } + purgatory: + lp->active = 0; + if (lp->phy[0].id) { /* Reset the PHY devices */ + for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/ + mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII); + while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST); + + de4x5_dbg_mii(dev, k); + } + } + if (!lp->mii_cnt) lp->useMII = FALSE; + + return lp->mii_cnt; +} + +static char * +build_setup_frame(struct net_device *dev, int mode) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + char *pa = lp->setup_frame; + + /* Initialise the setup frame */ + if (mode == ALL) { + memset(lp->setup_frame, 0, SETUP_FRAME_LEN); + } + + if (lp->setup_f == HASH_PERF) { + for (pa=lp->setup_frame+IMPERF_PA_OFFSET, i=0; i<ETH_ALEN; i++) { + *(pa + i) = dev->dev_addr[i]; /* Host address */ + if (i & 0x01) pa += 2; + } + *(lp->setup_frame + (HASH_TABLE_LEN >> 3) - 3) = 0x80; + } else { + for (i=0; i<ETH_ALEN; i++) { /* Host address */ + *(pa + (i&1)) = dev->dev_addr[i]; + if (i & 0x01) pa += 4; + } + for (i=0; i<ETH_ALEN; i++) { /* Broadcast address */ + *(pa + (i&1)) = (char) 0xff; + if (i & 0x01) pa += 4; + } + } + + return pa; /* Points to the next entry */ +} + +static void +enable_ast(struct net_device *dev, u32 time_out) +{ + timeout(dev, (void *)&de4x5_ast, (u_long)dev, time_out); + + return; +} + +static void +disable_ast(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + del_timer(&lp->timer); + + return; +} + +static long +de4x5_switch_mac_port(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + s32 omr; + + STOP_DE4X5; + + /* Assert the OMR_PS bit in CSR6 */ + omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | + OMR_FDX)); + omr |= lp->infoblock_csr6; + if (omr & OMR_PS) omr |= OMR_HBD; + outl(omr, DE4X5_OMR); + + /* Soft Reset */ + RESET_DE4X5; + + /* Restore the GEP - especially for COMPACT and Type 0 Infoblocks */ + if (lp->chipset == DC21140) { + gep_wr(lp->cache.gepc, dev); + gep_wr(lp->cache.gep, dev); + } else if ((lp->chipset & ~0x0ff) == DC2114x) { + reset_init_sia(dev, lp->cache.csr13, lp->cache.csr14, lp->cache.csr15); + } + + /* Restore CSR6 */ + outl(omr, DE4X5_OMR); + + /* Reset CSR8 */ + inl(DE4X5_MFC); + + return omr; +} + +static void +gep_wr(s32 data, struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->chipset == DC21140) { + outl(data, DE4X5_GEP); + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + outl((data<<16) | lp->cache.csr15, DE4X5_SIGR); + } + + return; +} + +static int +gep_rd(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (lp->chipset == DC21140) { + return inl(DE4X5_GEP); + } else if ((lp->chipset & ~0x00ff) == DC2114x) { + return (inl(DE4X5_SIGR) & 0x000fffff); + } + + return 0; +} + +static void +timeout(struct net_device *dev, void (*fn)(u_long data), u_long data, u_long msec) +{ + struct de4x5_private *lp = netdev_priv(dev); + int dt; + + /* First, cancel any pending timer events */ + del_timer(&lp->timer); + + /* Convert msec to ticks */ + dt = (msec * HZ) / 1000; + if (dt==0) dt=1; + + /* Set up timer */ + init_timer(&lp->timer); + lp->timer.expires = jiffies + dt; + lp->timer.function = fn; + lp->timer.data = data; + add_timer(&lp->timer); + + return; +} + +static void +yawn(struct net_device *dev, int state) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if ((lp->chipset == DC21040) || (lp->chipset == DC21140)) return; + + if(lp->bus == EISA) { + switch(state) { + case WAKEUP: + outb(WAKEUP, PCI_CFPM); + mdelay(10); + break; + + case SNOOZE: + outb(SNOOZE, PCI_CFPM); + break; + + case SLEEP: + outl(0, DE4X5_SICR); + outb(SLEEP, PCI_CFPM); + break; + } + } else { + struct pci_dev *pdev = to_pci_dev (lp->gendev); + switch(state) { + case WAKEUP: + pci_write_config_byte(pdev, PCI_CFDA_PSM, WAKEUP); + mdelay(10); + break; + + case SNOOZE: + pci_write_config_byte(pdev, PCI_CFDA_PSM, SNOOZE); + break; + + case SLEEP: + outl(0, DE4X5_SICR); + pci_write_config_byte(pdev, PCI_CFDA_PSM, SLEEP); + break; + } + } + + return; +} + +static void +de4x5_parse_params(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + char *p, *q, t; + + lp->params.fdx = 0; + lp->params.autosense = AUTO; + + if (args == NULL) return; + + if ((p = strstr(args, dev->name))) { + if (!(q = strstr(p+strlen(dev->name), "eth"))) q = p + strlen(p); + t = *q; + *q = '\0'; + + if (strstr(p, "fdx") || strstr(p, "FDX")) lp->params.fdx = 1; + + if (strstr(p, "autosense") || strstr(p, "AUTOSENSE")) { + if (strstr(p, "TP")) { + lp->params.autosense = TP; + } else if (strstr(p, "TP_NW")) { + lp->params.autosense = TP_NW; + } else if (strstr(p, "BNC")) { + lp->params.autosense = BNC; + } else if (strstr(p, "AUI")) { + lp->params.autosense = AUI; + } else if (strstr(p, "BNC_AUI")) { + lp->params.autosense = BNC; + } else if (strstr(p, "10Mb")) { + lp->params.autosense = _10Mb; + } else if (strstr(p, "100Mb")) { + lp->params.autosense = _100Mb; + } else if (strstr(p, "AUTO")) { + lp->params.autosense = AUTO; + } + } + *q = t; + } + + return; +} + +static void +de4x5_dbg_open(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + int i; + + if (de4x5_debug & DEBUG_OPEN) { + printk("%s: de4x5 opening with irq %d\n",dev->name,dev->irq); + printk("\tphysical address: "); + for (i=0;i<6;i++) { + printk("%2.2x:",(short)dev->dev_addr[i]); + } + printk("\n"); + printk("Descriptor head addresses:\n"); + printk("\t0x%8.8lx 0x%8.8lx\n",(u_long)lp->rx_ring,(u_long)lp->tx_ring); + printk("Descriptor addresses:\nRX: "); + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8lx ",(u_long)&lp->rx_ring[i].status); + } + } + printk("...0x%8.8lx\n",(u_long)&lp->rx_ring[i].status); + printk("TX: "); + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8lx ", (u_long)&lp->tx_ring[i].status); + } + } + printk("...0x%8.8lx\n", (u_long)&lp->tx_ring[i].status); + printk("Descriptor buffers:\nRX: "); + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8x ",le32_to_cpu(lp->rx_ring[i].buf)); + } + } + printk("...0x%8.8x\n",le32_to_cpu(lp->rx_ring[i].buf)); + printk("TX: "); + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + printk("0x%8.8x ", le32_to_cpu(lp->tx_ring[i].buf)); + } + } + printk("...0x%8.8x\n", le32_to_cpu(lp->tx_ring[i].buf)); + printk("Ring size: \nRX: %d\nTX: %d\n", + (short)lp->rxRingSize, + (short)lp->txRingSize); + } + + return; +} + +static void +de4x5_dbg_mii(struct net_device *dev, int k) +{ + struct de4x5_private *lp = netdev_priv(dev); + u_long iobase = dev->base_addr; + + if (de4x5_debug & DEBUG_MII) { + printk("\nMII device address: %d\n", lp->phy[k].addr); + printk("MII CR: %x\n",mii_rd(MII_CR,lp->phy[k].addr,DE4X5_MII)); + printk("MII SR: %x\n",mii_rd(MII_SR,lp->phy[k].addr,DE4X5_MII)); + printk("MII ID0: %x\n",mii_rd(MII_ID0,lp->phy[k].addr,DE4X5_MII)); + printk("MII ID1: %x\n",mii_rd(MII_ID1,lp->phy[k].addr,DE4X5_MII)); + if (lp->phy[k].id != BROADCOM_T4) { + printk("MII ANA: %x\n",mii_rd(0x04,lp->phy[k].addr,DE4X5_MII)); + printk("MII ANC: %x\n",mii_rd(0x05,lp->phy[k].addr,DE4X5_MII)); + } + printk("MII 16: %x\n",mii_rd(0x10,lp->phy[k].addr,DE4X5_MII)); + if (lp->phy[k].id != BROADCOM_T4) { + printk("MII 17: %x\n",mii_rd(0x11,lp->phy[k].addr,DE4X5_MII)); + printk("MII 18: %x\n",mii_rd(0x12,lp->phy[k].addr,DE4X5_MII)); + } else { + printk("MII 20: %x\n",mii_rd(0x14,lp->phy[k].addr,DE4X5_MII)); + } + } + + return; +} + +static void +de4x5_dbg_media(struct net_device *dev) +{ + struct de4x5_private *lp = netdev_priv(dev); + + if (lp->media != lp->c_media) { + if (de4x5_debug & DEBUG_MEDIA) { + printk("%s: media is %s%s\n", dev->name, + (lp->media == NC ? "unconnected, link down or incompatible connection" : + (lp->media == TP ? "TP" : + (lp->media == ANS ? "TP/Nway" : + (lp->media == BNC ? "BNC" : + (lp->media == AUI ? "AUI" : + (lp->media == BNC_AUI ? "BNC/AUI" : + (lp->media == EXT_SIA ? "EXT SIA" : + (lp->media == _100Mb ? "100Mb/s" : + (lp->media == _10Mb ? "10Mb/s" : + "???" + ))))))))), (lp->fdx?" full duplex.":".")); + } + lp->c_media = lp->media; + } + + return; +} + +static void +de4x5_dbg_srom(struct de4x5_srom *p) +{ + int i; + + if (de4x5_debug & DEBUG_SROM) { + printk("Sub-system Vendor ID: %04x\n", *((u_short *)p->sub_vendor_id)); + printk("Sub-system ID: %04x\n", *((u_short *)p->sub_system_id)); + printk("ID Block CRC: %02x\n", (u_char)(p->id_block_crc)); + printk("SROM version: %02x\n", (u_char)(p->version)); + printk("# controllers: %02x\n", (u_char)(p->num_controllers)); + + printk("Hardware Address: "); + for (i=0;i<ETH_ALEN-1;i++) { + printk("%02x:", (u_char)*(p->ieee_addr+i)); + } + printk("%02x\n", (u_char)*(p->ieee_addr+i)); + printk("CRC checksum: %04x\n", (u_short)(p->chksum)); + for (i=0; i<64; i++) { + printk("%3d %04x\n", i<<1, (u_short)*((u_short *)p+i)); + } + } + + return; +} + +static void +de4x5_dbg_rx(struct sk_buff *skb, int len) +{ + int i, j; + + if (de4x5_debug & DEBUG_RX) { + printk("R: %02x:%02x:%02x:%02x:%02x:%02x <- %02x:%02x:%02x:%02x:%02x:%02x len/SAP:%02x%02x [%d]\n", + (u_char)skb->data[0], + (u_char)skb->data[1], + (u_char)skb->data[2], + (u_char)skb->data[3], + (u_char)skb->data[4], + (u_char)skb->data[5], + (u_char)skb->data[6], + (u_char)skb->data[7], + (u_char)skb->data[8], + (u_char)skb->data[9], + (u_char)skb->data[10], + (u_char)skb->data[11], + (u_char)skb->data[12], + (u_char)skb->data[13], + len); + for (j=0; len>0;j+=16, len-=16) { + printk(" %03x: ",j); + for (i=0; i<16 && i<len; i++) { + printk("%02x ",(u_char)skb->data[i+j]); + } + printk("\n"); + } + } + + return; +} + +/* +** Perform IOCTL call functions here. Some are privileged operations and the +** effective uid is checked in those cases. In the normal course of events +** this function is only used for my testing. +*/ +static int +de4x5_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct de4x5_private *lp = netdev_priv(dev); + struct de4x5_ioctl *ioc = (struct de4x5_ioctl *) &rq->ifr_ifru; + u_long iobase = dev->base_addr; + int i, j, status = 0; + s32 omr; + union { + u8 addr[144]; + u16 sval[72]; + u32 lval[36]; + } tmp; + u_long flags = 0; + + switch(ioc->cmd) { + case DE4X5_GET_HWADDR: /* Get the hardware address */ + ioc->len = ETH_ALEN; + for (i=0; i<ETH_ALEN; i++) { + tmp.addr[i] = dev->dev_addr[i]; + } + if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT; + break; + + case DE4X5_SET_HWADDR: /* Set the hardware address */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (copy_from_user(tmp.addr, ioc->data, ETH_ALEN)) return -EFAULT; + if (netif_queue_stopped(dev)) + return -EBUSY; + netif_stop_queue(dev); + for (i=0; i<ETH_ALEN; i++) { + dev->dev_addr[i] = tmp.addr[i]; + } + build_setup_frame(dev, PHYS_ADDR_ONLY); + /* Set up the descriptor and give ownership to the card */ + load_packet(dev, lp->setup_frame, TD_IC | PERFECT_F | TD_SET | + SETUP_FRAME_LEN, (struct sk_buff *)1); + lp->tx_new = (++lp->tx_new) % lp->txRingSize; + outl(POLL_DEMAND, DE4X5_TPD); /* Start the TX */ + netif_wake_queue(dev); /* Unlock the TX ring */ + break; + + case DE4X5_SET_PROM: /* Set Promiscuous Mode */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + omr = inl(DE4X5_OMR); + omr |= OMR_PR; + outl(omr, DE4X5_OMR); + dev->flags |= IFF_PROMISC; + break; + + case DE4X5_CLR_PROM: /* Clear Promiscuous Mode */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + omr = inl(DE4X5_OMR); + omr &= ~OMR_PR; + outl(omr, DE4X5_OMR); + dev->flags &= ~IFF_PROMISC; + break; + + case DE4X5_SAY_BOO: /* Say "Boo!" to the kernel log file */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + printk("%s: Boo!\n", dev->name); + break; + + case DE4X5_MCA_EN: /* Enable pass all multicast addressing */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + omr = inl(DE4X5_OMR); + omr |= OMR_PM; + outl(omr, DE4X5_OMR); + break; + + case DE4X5_GET_STATS: /* Get the driver statistics */ + { + struct pkt_stats statbuf; + ioc->len = sizeof(statbuf); + spin_lock_irqsave(&lp->lock, flags); + memcpy(&statbuf, &lp->pktStats, ioc->len); + spin_unlock_irqrestore(&lp->lock, flags); + if (copy_to_user(ioc->data, &statbuf, ioc->len)) + return -EFAULT; + break; + } + case DE4X5_CLR_STATS: /* Zero out the driver statistics */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + spin_lock_irqsave(&lp->lock, flags); + memset(&lp->pktStats, 0, sizeof(lp->pktStats)); + spin_unlock_irqrestore(&lp->lock, flags); + break; + + case DE4X5_GET_OMR: /* Get the OMR Register contents */ + tmp.addr[0] = inl(DE4X5_OMR); + if (copy_to_user(ioc->data, tmp.addr, 1)) return -EFAULT; + break; + + case DE4X5_SET_OMR: /* Set the OMR Register contents */ + if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (copy_from_user(tmp.addr, ioc->data, 1)) return -EFAULT; + outl(tmp.addr[0], DE4X5_OMR); + break; + + case DE4X5_GET_REG: /* Get the DE4X5 Registers */ + j = 0; + tmp.lval[0] = inl(DE4X5_STS); j+=4; + tmp.lval[1] = inl(DE4X5_BMR); j+=4; + tmp.lval[2] = inl(DE4X5_IMR); j+=4; + tmp.lval[3] = inl(DE4X5_OMR); j+=4; + tmp.lval[4] = inl(DE4X5_SISR); j+=4; + tmp.lval[5] = inl(DE4X5_SICR); j+=4; + tmp.lval[6] = inl(DE4X5_STRR); j+=4; + tmp.lval[7] = inl(DE4X5_SIGR); j+=4; + ioc->len = j; + if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT; + break; + +#define DE4X5_DUMP 0x0f /* Dump the DE4X5 Status */ +/* + case DE4X5_DUMP: + j = 0; + tmp.addr[j++] = dev->irq; + for (i=0; i<ETH_ALEN; i++) { + tmp.addr[j++] = dev->dev_addr[i]; + } + tmp.addr[j++] = lp->rxRingSize; + tmp.lval[j>>2] = (long)lp->rx_ring; j+=4; + tmp.lval[j>>2] = (long)lp->tx_ring; j+=4; + + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4; + } + } + tmp.lval[j>>2] = (long)&lp->rx_ring[i].status; j+=4; + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4; + } + } + tmp.lval[j>>2] = (long)&lp->tx_ring[i].status; j+=4; + + for (i=0;i<lp->rxRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4; + } + } + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->rx_ring[i].buf); j+=4; + for (i=0;i<lp->txRingSize-1;i++){ + if (i < 3) { + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4; + } + } + tmp.lval[j>>2] = (s32)le32_to_cpu(lp->tx_ring[i].buf); j+=4; + + for (i=0;i<lp->rxRingSize;i++){ + tmp.lval[j>>2] = le32_to_cpu(lp->rx_ring[i].status); j+=4; + } + for (i=0;i<lp->txRingSize;i++){ + tmp.lval[j>>2] = le32_to_cpu(lp->tx_ring[i].status); j+=4; + } + + tmp.lval[j>>2] = inl(DE4X5_BMR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_TPD); j+=4; + tmp.lval[j>>2] = inl(DE4X5_RPD); j+=4; + tmp.lval[j>>2] = inl(DE4X5_RRBA); j+=4; + tmp.lval[j>>2] = inl(DE4X5_TRBA); j+=4; + tmp.lval[j>>2] = inl(DE4X5_STS); j+=4; + tmp.lval[j>>2] = inl(DE4X5_OMR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_IMR); j+=4; + tmp.lval[j>>2] = lp->chipset; j+=4; + if (lp->chipset == DC21140) { + tmp.lval[j>>2] = gep_rd(dev); j+=4; + } else { + tmp.lval[j>>2] = inl(DE4X5_SISR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_SICR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_STRR); j+=4; + tmp.lval[j>>2] = inl(DE4X5_SIGR); j+=4; + } + tmp.lval[j>>2] = lp->phy[lp->active].id; j+=4; + if (lp->phy[lp->active].id && (!lp->useSROM || lp->useMII)) { + tmp.lval[j>>2] = lp->active; j+=4; + tmp.lval[j>>2]=mii_rd(MII_CR,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_SR,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_ID0,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_ID1,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + if (lp->phy[lp->active].id != BROADCOM_T4) { + tmp.lval[j>>2]=mii_rd(MII_ANA,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(MII_ANLPA,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + } + tmp.lval[j>>2]=mii_rd(0x10,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + if (lp->phy[lp->active].id != BROADCOM_T4) { + tmp.lval[j>>2]=mii_rd(0x11,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + tmp.lval[j>>2]=mii_rd(0x12,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + } else { + tmp.lval[j>>2]=mii_rd(0x14,lp->phy[lp->active].addr,DE4X5_MII); j+=4; + } + } + + tmp.addr[j++] = lp->txRingSize; + tmp.addr[j++] = netif_queue_stopped(dev); + + ioc->len = j; + if (copy_to_user(ioc->data, tmp.addr, ioc->len)) return -EFAULT; + break; + +*/ + default: + return -EOPNOTSUPP; + } + + return status; +} + +static int __init de4x5_module_init (void) +{ + int err = 0; + +#ifdef CONFIG_PCI + err = pci_module_init (&de4x5_pci_driver); +#endif +#ifdef CONFIG_EISA + err |= eisa_driver_register (&de4x5_eisa_driver); +#endif + + return err; +} + +static void __exit de4x5_module_exit (void) +{ +#ifdef CONFIG_PCI + pci_unregister_driver (&de4x5_pci_driver); +#endif +#ifdef CONFIG_EISA + eisa_driver_unregister (&de4x5_eisa_driver); +#endif +} + +module_init (de4x5_module_init); +module_exit (de4x5_module_exit); |