Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 169 insertions, 0 deletions

diff --git a/drivers/net/skfp/h/targethw.h b/drivers/net/skfp/h/targethw.h
new file mode 100644
index 00000000000..22c4923241d
--- /dev/null
+++ b/drivers/net/skfp/h/targethw.h
@@ -0,0 +1,169 @@
+/******************************************************************************
+ *
+ *	(C)Copyright 1998,1999 SysKonnect,
+ *	a business unit of Schneider & Koch & Co. Datensysteme GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef	_TARGETHW_
+#define _TARGETHW_
+
+	/*
+	 *  PCI Watermark definition
+	 */
+#ifdef	PCI
+#define	RX_WATERMARK	24
+#define TX_WATERMARK	24
+#define SK_ML_ID_1	0x20
+#define SK_ML_ID_2	0x30
+#endif
+
+#include	"h/skfbi.h"
+#ifndef TAG_MODE	
+#include	"h/fplus.h"
+#else
+#include	"h/fplustm.h"
+#endif
+
+#ifndef	HW_PTR
+#define HW_PTR  void __iomem *
+#endif
+
+#ifdef MULT_OEM
+#define	OI_STAT_LAST		0	/* end of OEM data base */
+#define	OI_STAT_PRESENT		1	/* entry present but not empty */
+#define	OI_STAT_VALID		2	/* holds valid ID, but is not active */ 
+#define	OI_STAT_ACTIVE		3	/* holds valid ID, entry is active */
+					/* active = adapter is supported */
+
+/* Memory representation of IDs must match representation in adapter. */
+struct	s_oem_ids {
+	u_char	oi_status ;		/* Stat: last, present, valid, active */
+	u_char	oi_mark[5] ;		/* "PID00" .. "PID07" ..	*/
+	u_char 	oi_id[4] ;		/* id bytes, representation as	*/
+					/* defined by hardware,		*/	
+#ifdef PCI
+	u_char 	oi_sub_id[4] ;		/* sub id bytes, representation as */
+					/* defined by hardware,		*/
+#endif
+#ifdef ISA
+	u_char	oi_logo_len ;		/* the length of the adapter logo */	
+	u_char	oi_logo[6] ;		/* the adapter logo		*/
+	u_char	oi_reserved1 ;
+#endif	/* ISA */
+} ;
+#endif	/* MULT_OEM */
+
+
+struct s_smt_hw {
+	/*
+	 * global
+	 */
+	HW_PTR	iop ;			/* IO base address */
+	short	dma ;			/* DMA channel */
+	short	irq ;			/* IRQ level */
+	short	eprom ;			/* FLASH prom */
+#ifndef	PCI
+	short	DmaWriteExtraBytes ;	/* add bytes for DMA write */
+#endif
+
+#ifndef SYNC
+	u_short	n_a_send ;		/* pending send requests */
+#endif
+
+#if	(defined(EISA) || defined(MCA) || defined(PCI))
+	short	slot ;			/* slot number */
+	short   max_slots ;		/* maximum number of slots */
+#endif
+
+#if	(defined(PCI) || defined(MCA))
+	short	wdog_used ;		/* TRUE if the watch dog is used */
+#endif
+
+#ifdef	MCA
+	short	slot_32 ;		/* 32bit slot (1) or 16bit slot (0) */
+	short	rev ;			/* Board revision (FMx_REV). */
+	short	VFullRead ;		/* V_full value for DMA read */
+	short	VFullWrite ;		/* V_full value for DMA write */
+#endif
+
+#ifdef	EISA
+	short	led ;			/* LED for FE card */
+
+	short	dma_rmode ;		/* read mode */
+	short	dma_wmode ;		/* write mode */
+	short	dma_emode ;		/* extend mode */
+
+	/* DMA controller channel dependent io addresses */
+	u_short dma_base_word_count ;
+	u_short dma_base_address ;
+	u_short dma_base_address_page ;
+#endif
+
+#ifdef	PCI
+	u_short	pci_handle ;		/* handle to access the BIOS func */
+	u_long	is_imask ;		/* int maske for the int source reg */
+	u_long	phys_mem_addr ;		/* physical memory address */
+	u_short	mc_dummy ;		/* work around for MC compiler bug */	
+	/*
+	 * state of the hardware
+	 */
+	u_short hw_state ;		/* started or stopped */
+
+#define	STARTED		1
+#define	STOPPED		0
+
+	int	hw_is_64bit ;		/* does we have a 64 bit adapter */
+#endif
+
+#ifdef	TAG_MODE
+	u_long	pci_fix_value ;		/* value parsed by PCIFIX */
+#endif
+
+	/*
+	 * hwt.c
+	 */
+	u_long	t_start ;		/* HWT start */
+	u_long	t_stop ;		/* HWT stop */
+	u_short	timer_activ ;		/* HWT timer active */
+
+	/*
+	 * PIC
+	 */
+	u_char	pic_a1 ;
+	u_char	pic_21 ;
+
+	/*
+	 * GENERIC ; do not modify beyond this line
+	 */
+
+	/*
+	 * physical and canonical address
+	 */
+	struct fddi_addr fddi_home_addr ;
+	struct fddi_addr fddi_canon_addr ;
+	struct fddi_addr fddi_phys_addr ;
+
+	/*
+	 * mac variables
+	 */
+	struct mac_parameter mac_pa ;	/* tmin, tmax, tvx, treq .. */
+	struct mac_counter mac_ct ;	/* recv., lost, error  */
+	u_short	mac_ring_is_up ;	/* ring is up flag */
+
+	struct s_smt_fp	fp ;		/* formac+ */
+
+#ifdef MULT_OEM
+	struct s_oem_ids *oem_id ;	/* pointer to selected id */
+	int oem_min_status ;		/* IDs to take care of */
+#endif	/* MULT_OEM */
+
+} ;
+#endif