Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes

8 files changed, 249 insertions, 129 deletions

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index dbba5abf0db..f84ab618214 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -41,7 +41,7 @@
 
 
 /* AMD */
-#define AM29DL800BB	0x22C8
+#define AM29DL800BB	0x22CB
 #define AM29DL800BT	0x224A
 
 #define AM29F800BB	0x2258
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 54e36bfc2c3..8bd0dea6885 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -15,6 +15,8 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/mutex.h>
+#include <linux/err.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
@@ -487,9 +489,8 @@ add_dataflash(struct spi_device *spi, char *name,
 	device->write = dataflash_write;
 	device->priv = priv;
 
-	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, "
-		"erasesize %d bytes\n", name, device->size/1024,
-		 pagesize, pagesize * 8);	/* 8 pages = 1 block */
+	dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n",
+			name, DIV_ROUND_UP(device->size, 1024), pagesize);
 	dev_set_drvdata(&spi->dev, priv);
 
 	if (mtd_has_partitions()) {
@@ -518,65 +519,57 @@ add_dataflash(struct spi_device *spi, char *name,
 	return add_mtd_device(device) == 1 ? -ENODEV : 0;
 }
 
-/*
- * Detect and initialize DataFlash device:
- *
- *   Device      Density         ID code          #Pages PageSize  Offset
- *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
- *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
- *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
- *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
- *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
- *   AT45DB0321B 32Mbit  (4M)    xx1101xx (0x34)   8192    528     10
- *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
- *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
- */
-
 struct flash_info {
 	char		*name;
 
-	/* JEDEC id zero means "no ID" (most older chips); otherwise it has
-	 * a high byte of zero plus three data bytes: the manufacturer id,
-	 * then a two byte device id.
+	/* JEDEC id has a high byte of zero plus three data bytes:
+	 * the manufacturer id, then a two byte device id.
 	 */
 	uint32_t	jedec_id;
 
-	/* The size listed here is what works with OPCODE_SE, which isn't
-	 * necessarily called a "sector" by the vendor.
-	 */
+	/* The size listed here is what works with OP_ERASE_PAGE. */
 	unsigned	nr_pages;
 	uint16_t	pagesize;
 	uint16_t	pageoffset;
 
 	uint16_t	flags;
-#define	SUP_POW2PS	0x02
-#define	IS_POW2PS	0x01
+#define SUP_POW2PS	0x0002		/* supports 2^N byte pages */
+#define IS_POW2PS	0x0001		/* uses 2^N byte pages */
 };
 
 static struct flash_info __devinitdata dataflash_data [] = {
 
-	{ "at45db011d",  0x1f2200, 512, 264, 9, SUP_POW2PS},
+	/*
+	 * NOTE:  chips with SUP_POW2PS (rev D and up) need two entries,
+	 * one with IS_POW2PS and the other without.  The entry with the
+	 * non-2^N byte page size can't name exact chip revisions without
+	 * losing backwards compatibility for cmdlinepart.
+	 *
+	 * These newer chips also support 128-byte security registers (with
+	 * 64 bytes one-time-programmable) and software write-protection.
+	 */
+	{ "AT45DB011B",  0x1f2200, 512, 264, 9, SUP_POW2PS},
 	{ "at45db011d",  0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db021d",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
+	{ "AT45DB021B",  0x1f2300, 1024, 264, 9, SUP_POW2PS},
 	{ "at45db021d",  0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db041d",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
+	{ "AT45DB041x",  0x1f2400, 2048, 264, 9, SUP_POW2PS},
 	{ "at45db041d",  0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db081d",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
+	{ "AT45DB081B",  0x1f2500, 4096, 264, 9, SUP_POW2PS},
 	{ "at45db081d",  0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db161d",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
+	{ "AT45DB161x",  0x1f2600, 4096, 528, 10, SUP_POW2PS},
 	{ "at45db161d",  0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db321c",  0x1f2700, 8192, 528, 10, },
+	{ "AT45DB321x",  0x1f2700, 8192, 528, 10, 0},		/* rev C */
 
-	{ "at45db321d",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
+	{ "AT45DB321x",  0x1f2701, 8192, 528, 10, SUP_POW2PS},
 	{ "at45db321d",  0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS},
 
-	{ "at45db641d",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
-	{ "at45db641d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
+	{ "AT45DB642x",  0x1f2800, 8192, 1056, 11, SUP_POW2PS},
+	{ "at45db642d",  0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS},
 };
 
 static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
@@ -588,17 +581,23 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 	struct flash_info	*info;
 	int status;
 
-
 	/* JEDEC also defines an optional "extended device information"
 	 * string for after vendor-specific data, after the three bytes
 	 * we use here.  Supporting some chips might require using it.
+	 *
+	 * If the vendor ID isn't Atmel's (0x1f), assume this call failed.
+	 * That's not an error; only rev C and newer chips handle it, and
+	 * only Atmel sells these chips.
 	 */
 	tmp = spi_write_then_read(spi, &code, 1, id, 3);
 	if (tmp < 0) {
 		DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n",
 			spi->dev.bus_id, tmp);
-		return NULL;
+		return ERR_PTR(tmp);
 	}
+	if (id[0] != 0x1f)
+		return NULL;
+
 	jedec = id[0];
 	jedec = jedec << 8;
 	jedec |= id[1];
@@ -609,19 +608,53 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi)
 			tmp < ARRAY_SIZE(dataflash_data);
 			tmp++, info++) {
 		if (info->jedec_id == jedec) {
+			DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n",
+				dev_name(&spi->dev),
+				(info->flags & SUP_POW2PS)
+					? ", binary pagesize" : ""
+				);
 			if (info->flags & SUP_POW2PS) {
 				status = dataflash_status(spi);
-				if (status & 0x1)
-					/* return power of 2 pagesize */
-					return ++info;
-				else
-					return info;
+				if (status < 0) {
+					DEBUG(MTD_DEBUG_LEVEL1,
+						"%s: status error %d\n",
+						dev_name(&spi->dev), status);
+					return ERR_PTR(status);
+				}
+				if (status & 0x1) {
+					if (info->flags & IS_POW2PS)
+						return info;
+				} else {
+					if (!(info->flags & IS_POW2PS))
+						return info;
+				}
 			}
 		}
 	}
-	return NULL;
+
+	/*
+	 * Treat other chips as errors ... we won't know the right page
+	 * size (it might be binary) even when we can tell which density
+	 * class is involved (legacy chip id scheme).
+	 */
+	dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec);
+	return ERR_PTR(-ENODEV);
 }
 
+/*
+ * Detect and initialize DataFlash device, using JEDEC IDs on newer chips
+ * or else the ID code embedded in the status bits:
+ *
+ *   Device      Density         ID code          #Pages PageSize  Offset
+ *   AT45DB011B  1Mbit   (128K)  xx0011xx (0x0c)    512    264      9
+ *   AT45DB021B  2Mbit   (256K)  xx0101xx (0x14)   1024    264      9
+ *   AT45DB041B  4Mbit   (512K)  xx0111xx (0x1c)   2048    264      9
+ *   AT45DB081B  8Mbit   (1M)    xx1001xx (0x24)   4096    264      9
+ *   AT45DB0161B 16Mbit  (2M)    xx1011xx (0x2c)   4096    528     10
+ *   AT45DB0321B 32Mbit  (4M)    xx1101xx (0x34)   8192    528     10
+ *   AT45DB0642  64Mbit  (8M)    xx111xxx (0x3c)   8192   1056     11
+ *   AT45DB1282  128Mbit (16M)   xx0100xx (0x10)  16384   1056     11
+ */
 static int __devinit dataflash_probe(struct spi_device *spi)
 {
 	int status;
@@ -632,14 +665,17 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 	 * If it succeeds we know we have either a C or D part.
 	 * D will support power of 2 pagesize option.
 	 */
-
 	info = jedec_probe(spi);
-
+	if (IS_ERR(info))
+		return PTR_ERR(info);
 	if (info != NULL)
 		return add_dataflash(spi, info->name, info->nr_pages,
 				 info->pagesize, info->pageoffset);
 
-
+	/*
+	 * Older chips support only legacy commands, identifing
+	 * capacity using bits in the status byte.
+	 */
 	status = dataflash_status(spi);
 	if (status <= 0 || status == 0xff) {
 		DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n",
@@ -661,13 +697,13 @@ static int __devinit dataflash_probe(struct spi_device *spi)
 		status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9);
 		break;
 	case 0x1c:	/* 0 1 1 1 x x */
-		status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9);
+		status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9);
 		break;
 	case 0x24:	/* 1 0 0 1 x x */
 		status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9);
 		break;
 	case 0x2c:	/* 1 0 1 1 x x */
-		status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10);
+		status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10);
 		break;
 	case 0x34:	/* 1 1 0 1 x x */
 		status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10);
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 28cc6787a80..00d46e137b2 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -125,8 +125,11 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 	       int (*fill_super)(struct super_block *, void *, int),
 	       struct vfsmount *mnt)
 {
-	struct nameidata nd;
-	int mtdnr, ret;
+#ifdef CONFIG_BLOCK
+	struct block_device *bdev;
+	int ret, major;
+#endif
+	int mtdnr;
 
 	if (!dev_name)
 		return -EINVAL;
@@ -178,45 +181,38 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags,
 		}
 	}
 
+#ifdef CONFIG_BLOCK
 	/* try the old way - the hack where we allowed users to mount
 	 * /dev/mtdblock$(n) but didn't actually _use_ the blockdev
 	 */
-	ret = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
-
-	DEBUG(1, "MTDSB: path_lookup() returned %d, inode %p\n",
-	      ret, nd.path.dentry ? nd.path.dentry->d_inode : NULL);
-
-	if (ret)
+	bdev = lookup_bdev(dev_name);
+	if (IS_ERR(bdev)) {
+		ret = PTR_ERR(bdev);
+		DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret);
 		return ret;
+	}
+	DEBUG(1, "MTDSB: lookup_bdev() returned 0\n");
 
 	ret = -EINVAL;
 
-	if (!S_ISBLK(nd.path.dentry->d_inode->i_mode))
-		goto out;
-
-	if (nd.path.mnt->mnt_flags & MNT_NODEV) {
-		ret = -EACCES;
-		goto out;
-	}
+	major = MAJOR(bdev->bd_dev);
+	mtdnr = MINOR(bdev->bd_dev);
+	bdput(bdev);
 
-	if (imajor(nd.path.dentry->d_inode) != MTD_BLOCK_MAJOR)
+	if (major != MTD_BLOCK_MAJOR)
 		goto not_an_MTD_device;
 
-	mtdnr = iminor(nd.path.dentry->d_inode);
-	path_put(&nd.path);
-
 	return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super,
 			     mnt);
 
 not_an_MTD_device:
+#endif /* CONFIG_BLOCK */
+
 	if (!(flags & MS_SILENT))
 		printk(KERN_NOTICE
 		       "MTD: Attempt to mount non-MTD device \"%s\"\n",
 		       dev_name);
-out:
-	path_put(&nd.path);
-	return ret;
-
+	return -EINVAL;
 }
 
 EXPORT_SYMBOL_GPL(get_sb_mtd);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 71406e51785..02f9cc30d77 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -104,11 +104,24 @@ config MTD_NAND_BF5XX
 
 config MTD_NAND_BF5XX_HWECC
 	bool "BF5XX NAND Hardware ECC"
+	default y
 	depends on MTD_NAND_BF5XX
 	help
 	  Enable the use of the BF5XX's internal ECC generator when
 	  using NAND.
 
+config MTD_NAND_BF5XX_BOOTROM_ECC
+	bool "Use Blackfin BootROM ECC Layout"
+	default n
+	depends on MTD_NAND_BF5XX_HWECC
+	help
+	  If you wish to modify NAND pages and allow the Blackfin on-chip
+	  BootROM to boot from them, say Y here.  This is only necessary
+	  if you are booting U-Boot out of NAND and you wish to update
+	  U-Boot from Linux' userspace.  Otherwise, you should say N here.
+
+	  If unsure, say N.
+
 config MTD_NAND_RTC_FROM4
 	tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
 	depends on SH_SOLUTION_ENGINE
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index e87a5729732..9af2a2cc115 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] =
 	 P_NAND_ALE,
 	 0};
 
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+static uint8_t bbt_pattern[] = { 0xff };
+
+static struct nand_bbt_descr bootrom_bbt = {
+	.options = 0,
+	.offs = 63,
+	.len = 1,
+	.pattern = bbt_pattern,
+};
+
+static struct nand_ecclayout bootrom_ecclayout = {
+	.eccbytes = 24,
+	.eccpos = {
+		0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+		0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+		0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+		0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+		0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+		0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+		0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+		0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+	},
+	.oobfree = {
+		{ 0x8 * 0 + 3, 5 },
+		{ 0x8 * 1 + 3, 5 },
+		{ 0x8 * 2 + 3, 5 },
+		{ 0x8 * 3 + 3, 5 },
+		{ 0x8 * 4 + 3, 5 },
+		{ 0x8 * 5 + 3, 5 },
+		{ 0x8 * 6 + 3, 5 },
+		{ 0x8 * 7 + 3, 5 },
+	}
+};
+#endif
+
 /*
  * Data structures for bf5xx nand flash controller driver
  */
@@ -273,7 +308,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 		dat += 256;
 		read_ecc += 8;
 		calc_ecc += 8;
-		ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+		ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
 	}
 
 	return ret;
@@ -298,7 +333,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 	ecc0 = bfin_read_NFC_ECC0();
 	ecc1 = bfin_read_NFC_ECC1();
 
-	code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+	code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
 	dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
 
@@ -310,7 +345,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
 	if (page_size == 512) {
 		ecc0 = bfin_read_NFC_ECC2();
 		ecc1 = bfin_read_NFC_ECC3();
-		code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11);
+		code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
 
 		/* second 3 bytes in ecc_code for second 256
 		 * bytes of 512 page size
@@ -514,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
 /*
  * System initialization functions
  */
-
 static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 {
 	int ret;
@@ -547,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
 	return 0;
 }
 
+static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
+{
+	/* Free NFC DMA channel */
+	if (hardware_ecc)
+		free_dma(CH_NFC);
+}
+
 /*
  * BF5XX NFC hardware initialization
  *  - pin mux setup
@@ -605,7 +646,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 #endif
 }
 
-static int bf5xx_nand_remove(struct platform_device *pdev)
+static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 {
 	struct bf5xx_nand_info *info = to_nand_info(pdev);
 	struct mtd_info *mtd = NULL;
@@ -623,6 +664,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
 	}
 
 	peripheral_free_list(bfin_nfc_pin_req);
+	bf5xx_nand_dma_remove(info);
 
 	/* free the common resources */
 	kfree(info);
@@ -638,7 +680,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev)
  * it can allocate all necessary resources then calls the
  * nand layer to look for devices
  */
-static int bf5xx_nand_probe(struct platform_device *pdev)
+static int __devinit bf5xx_nand_probe(struct platform_device *pdev)
 {
 	struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
 	struct bf5xx_nand_info *info = NULL;
@@ -648,22 +690,21 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "(%p)\n", pdev);
 
-	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
-		printk(KERN_ERR DRV_NAME
-		": Requesting Peripherals failed\n");
-		return -EFAULT;
-	}
-
 	if (!plat) {
 		dev_err(&pdev->dev, "no platform specific information\n");
-		goto exit_error;
+		return -EINVAL;
+	}
+
+	if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+		dev_err(&pdev->dev, "requesting Peripherals failed\n");
+		return -EFAULT;
 	}
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
 	if (info == NULL) {
 		dev_err(&pdev->dev, "no memory for flash info\n");
 		err = -ENOMEM;
-		goto exit_error;
+		goto out_err_kzalloc;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -707,11 +748,16 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 
 	/* initialise the hardware */
 	err = bf5xx_nand_hw_init(info);
-	if (err != 0)
-		goto exit_error;
+	if (err)
+		goto out_err_hw_init;
 
 	/* setup hardware ECC data struct */
 	if (hardware_ecc) {
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+		chip->badblock_pattern = &bootrom_bbt;
+		chip->ecc.layout = &bootrom_ecclayout;
+#endif
+
 		if (plat->page_size == NFC_PG_SIZE_256) {
 			chip->ecc.bytes = 3;
 			chip->ecc.size = 256;
@@ -733,7 +779,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	/* scan hardware nand chip and setup mtd info data struct */
 	if (nand_scan(mtd, 1)) {
 		err = -ENXIO;
-		goto exit_error;
+		goto out_err_nand_scan;
 	}
 
 	/* add NAND partition */
@@ -742,11 +788,14 @@ static int bf5xx_nand_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "initialised ok\n");
 	return 0;
 
-exit_error:
-	bf5xx_nand_remove(pdev);
+out_err_nand_scan:
+	bf5xx_nand_dma_remove(info);
+out_err_hw_init:
+	platform_set_drvdata(pdev, NULL);
+	kfree(info);
+out_err_kzalloc:
+	peripheral_free_list(bfin_nfc_pin_req);
 
-	if (err == 0)
-		err = -EINVAL;
 	return err;
 }
 
@@ -775,7 +824,7 @@ static int bf5xx_nand_resume(struct platform_device *dev)
 /* driver device registration */
 static struct platform_driver bf5xx_nand_driver = {
 	.probe		= bf5xx_nand_probe,
-	.remove		= bf5xx_nand_remove,
+	.remove		= __devexit_p(bf5xx_nand_remove),
 	.suspend	= bf5xx_nand_suspend,
 	.resume		= bf5xx_nand_resume,
 	.driver		= {
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index 765d4f0f7c8..e4226e02d63 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1125,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
 		goto out;
 	mh = (struct NFTLMediaHeader *)buf;
 
-	mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits);
-	mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN);
-	mh->FormattedSize = le32_to_cpu(mh->FormattedSize);
+	le16_to_cpus(&mh->NumEraseUnits);
+	le16_to_cpus(&mh->FirstPhysicalEUN);
+	le32_to_cpus(&mh->FormattedSize);
 
 	printk(KERN_INFO "    DataOrgID        = %s\n"
 			 "    NumEraseUnits    = %d\n"
@@ -1235,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
 	mh = (struct INFTLMediaHeader *)buf;
 
-	mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks);
-	mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions);
-	mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions);
-	mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
-	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
-	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
+	le32_to_cpus(&mh->NoOfBootImageBlocks);
+	le32_to_cpus(&mh->NoOfBinaryPartitions);
+	le32_to_cpus(&mh->NoOfBDTLPartitions);
+	le32_to_cpus(&mh->BlockMultiplierBits);
+	le32_to_cpus(&mh->FormatFlags);
+	le32_to_cpus(&mh->PercentUsed);
 
 	printk(KERN_INFO "    bootRecordID          = %s\n"
 			 "    NoOfBootImageBlocks   = %d\n"
@@ -1277,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti
 	/* Scan the partitions */
 	for (i = 0; (i < 4); i++) {
 		ip = &(mh->Partitions[i]);
-		ip->virtualUnits = le32_to_cpu(ip->virtualUnits);
-		ip->firstUnit = le32_to_cpu(ip->firstUnit);
-		ip->lastUnit = le32_to_cpu(ip->lastUnit);
-		ip->flags = le32_to_cpu(ip->flags);
-		ip->spareUnits = le32_to_cpu(ip->spareUnits);
-		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
+		le32_to_cpus(&ip->virtualUnits);
+		le32_to_cpus(&ip->firstUnit);
+		le32_to_cpus(&ip->lastUnit);
+		le32_to_cpus(&ip->flags);
+		le32_to_cpus(&ip->spareUnits);
+		le32_to_cpus(&ip->Reserved0);
 
 		printk(KERN_INFO	"    PARTITION[%d] ->\n"
 			"        virtualUnits    = %d\n"
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 9dff51351f4..98ad3cefcaf 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -887,7 +887,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 		goto err;
 	}
 
-	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start);
+	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start);
 	if (!priv->mtd.name) {
 		ret = -ENOMEM;
 		goto err;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index ecd70e2504f..556e8131ecd 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -28,6 +28,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
+#include <asm/div64.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/string.h>
@@ -207,13 +208,16 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define STATE_CMD_READID       0x0000000A /* read ID */
 #define STATE_CMD_ERASE2       0x0000000B /* sector erase second command */
 #define STATE_CMD_RESET        0x0000000C /* reset */
+#define STATE_CMD_RNDOUT       0x0000000D /* random output command */
+#define STATE_CMD_RNDOUTSTART  0x0000000E /* random output start command */
 #define STATE_CMD_MASK         0x0000000F /* command states mask */
 
 /* After an address is input, the simulator goes to one of these states */
 #define STATE_ADDR_PAGE        0x00000010 /* full (row, column) address is accepted */
 #define STATE_ADDR_SEC         0x00000020 /* sector address was accepted */
-#define STATE_ADDR_ZERO        0x00000030 /* one byte zero address was accepted */
-#define STATE_ADDR_MASK        0x00000030 /* address states mask */
+#define STATE_ADDR_COLUMN      0x00000030 /* column address was accepted */
+#define STATE_ADDR_ZERO        0x00000040 /* one byte zero address was accepted */
+#define STATE_ADDR_MASK        0x00000070 /* address states mask */
 
 /* Durind data input/output the simulator is in these states */
 #define STATE_DATAIN           0x00000100 /* waiting for data input */
@@ -240,7 +244,7 @@ MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the I
 #define ACTION_OOBOFF    0x00600000 /* add to address OOB offset */
 #define ACTION_MASK      0x00700000 /* action mask */
 
-#define NS_OPER_NUM      12 /* Number of operations supported by the simulator */
+#define NS_OPER_NUM      13 /* Number of operations supported by the simulator */
 #define NS_OPER_STATES   6  /* Maximum number of states in operation */
 
 #define OPT_ANY          0xFFFFFFFF /* any chip supports this operation */
@@ -373,7 +377,10 @@ static struct nandsim_operations {
 	{OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
 	/* Large page devices read page */
 	{OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
-			       STATE_DATAOUT, STATE_READY}}
+			       STATE_DATAOUT, STATE_READY}},
+	/* Large page devices random page read */
+	{OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
+			       STATE_DATAOUT, STATE_READY}},
 };
 
 struct weak_block {
@@ -579,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd)
 	if (ns->busw == 16)
 		NS_WARN("16-bit flashes support wasn't tested\n");
 
-	printk("flash size: %llu MiB\n",        ns->geom.totsz >> 20);
+	printk("flash size: %llu MiB\n",
+			(unsigned long long)ns->geom.totsz >> 20);
 	printk("page size: %u bytes\n",         ns->geom.pgsz);
 	printk("OOB area size: %u bytes\n",     ns->geom.oobsz);
 	printk("sector size: %u KiB\n",         ns->geom.secsz >> 10);
@@ -588,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd)
 	printk("bus width: %u\n",               ns->busw);
 	printk("bits in sector size: %u\n",     ns->geom.secshift);
 	printk("bits in page size: %u\n",       ns->geom.pgshift);
-	printk("bits in OOB size: %u\n",        ns->geom.oobshift);
-	printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10);
+	printk("bits in OOB size: %u\n",	ns->geom.oobshift);
+	printk("flash size with OOB: %llu KiB\n",
+			(unsigned long long)ns->geom.totszoob >> 10);
 	printk("page address bytes: %u\n",      ns->geom.pgaddrbytes);
 	printk("sector address bytes: %u\n",    ns->geom.secaddrbytes);
 	printk("options: %#x\n",                ns->options);
@@ -937,12 +946,18 @@ static char *get_state_name(uint32_t state)
 			return "STATE_CMD_ERASE2";
 		case STATE_CMD_RESET:
 			return "STATE_CMD_RESET";
+		case STATE_CMD_RNDOUT:
+			return "STATE_CMD_RNDOUT";
+		case STATE_CMD_RNDOUTSTART:
+			return "STATE_CMD_RNDOUTSTART";
 		case STATE_ADDR_PAGE:
 			return "STATE_ADDR_PAGE";
 		case STATE_ADDR_SEC:
 			return "STATE_ADDR_SEC";
 		case STATE_ADDR_ZERO:
 			return "STATE_ADDR_ZERO";
+		case STATE_ADDR_COLUMN:
+			return "STATE_ADDR_COLUMN";
 		case STATE_DATAIN:
 			return "STATE_DATAIN";
 		case STATE_DATAOUT:
@@ -973,6 +988,7 @@ static int check_command(int cmd)
 	switch (cmd) {
 
 	case NAND_CMD_READ0:
+	case NAND_CMD_READ1:
 	case NAND_CMD_READSTART:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_READOOB:
@@ -982,7 +998,8 @@ static int check_command(int cmd)
 	case NAND_CMD_READID:
 	case NAND_CMD_ERASE2:
 	case NAND_CMD_RESET:
-	case NAND_CMD_READ1:
+	case NAND_CMD_RNDOUT:
+	case NAND_CMD_RNDOUTSTART:
 		return 0;
 
 	case NAND_CMD_STATUS_MULTI:
@@ -1021,6 +1038,10 @@ static uint32_t get_state_by_command(unsigned command)
 			return STATE_CMD_ERASE2;
 		case NAND_CMD_RESET:
 			return STATE_CMD_RESET;
+		case NAND_CMD_RNDOUT:
+			return STATE_CMD_RNDOUT;
+		case NAND_CMD_RNDOUTSTART:
+			return STATE_CMD_RNDOUTSTART;
 	}
 
 	NS_ERR("get_state_by_command: unknown command, BUG\n");
@@ -1582,6 +1603,11 @@ static void switch_state(struct nandsim *ns)
 				ns->regs.num = 1;
 				break;
 
+			case STATE_ADDR_COLUMN:
+				/* Column address is always 2 bytes */
+				ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
+				break;
+
 			default:
 				NS_ERR("switch_state: BUG! unknown address state\n");
 		}
@@ -1693,15 +1719,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 			return;
 		}
 
-		/*
-		 * Chip might still be in STATE_DATAOUT
-		 * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or
-		 * STATE_DATAOUT_STATUS_M state. If so, switch state.
-		 */
+		/* Check that the command byte is correct */
+		if (check_command(byte)) {
+			NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
+			return;
+		}
+
 		if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
 			|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
-			|| ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT))
+			|| NS_STATE(ns->state) == STATE_DATAOUT) {
+			int row = ns->regs.row;
+
 			switch_state(ns);
+			if (byte == NAND_CMD_RNDOUT)
+				ns->regs.row = row;
+		}
 
 		/* Check if chip is expecting command */
 		if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
@@ -1715,12 +1747,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
 			switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
 		}
 
-		/* Check that the command byte is correct */
-		if (check_command(byte)) {
-			NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
-			return;
-		}
-
 		NS_DBG("command byte corresponding to %s state accepted\n",
 			get_state_name(get_state_by_command(byte)));
 		ns->regs.command = byte;