Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 303 insertions, 0 deletions

diff --git a/drivers/media/video/ovcamchip/ov76be.c b/drivers/media/video/ovcamchip/ov76be.c
new file mode 100644
index 00000000000..29bbdc05e3b
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov76be.c
@@ -0,0 +1,303 @@
+/* OmniVision OV76BE Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* OV7610 registers: Since the OV76BE is undocumented, we'll settle for these
+ * for now. */
+#define REG_GAIN		0x00	/* gain [5:0] */
+#define REG_BLUE		0x01	/* blue channel balance */
+#define REG_RED			0x02	/* red channel balance */
+#define REG_SAT			0x03	/* saturation */
+#define REG_CNT			0x05	/* Y contrast */
+#define REG_BRT			0x06	/* Y brightness */
+#define REG_BLUE_BIAS		0x0C	/* blue channel bias [5:0] */
+#define REG_RED_BIAS		0x0D	/* red channel bias [5:0] */
+#define REG_GAMMA_COEFF		0x0E	/* gamma settings */
+#define REG_WB_RANGE		0x0F	/* AEC/ALC/S-AWB settings */
+#define REG_EXP			0x10	/* manual exposure setting */
+#define REG_CLOCK		0x11	/* polarity/clock prescaler */
+#define REG_FIELD_DIVIDE	0x16	/* field interval/mode settings */
+#define REG_HWIN_START		0x17	/* horizontal window start */
+#define REG_HWIN_END		0x18	/* horizontal window end */
+#define REG_VWIN_START		0x19	/* vertical window start */
+#define REG_VWIN_END		0x1A	/* vertical window end */
+#define REG_PIXEL_SHIFT   	0x1B	/* pixel shift */
+#define REG_YOFFSET		0x21	/* Y channel offset */
+#define REG_UOFFSET		0x22	/* U channel offset */
+#define REG_ECW			0x24	/* exposure white level for AEC */
+#define REG_ECB			0x25	/* exposure black level for AEC */
+#define REG_FRAMERATE_H		0x2A	/* frame rate MSB + misc */
+#define REG_FRAMERATE_L		0x2B	/* frame rate LSB */
+#define REG_ALC			0x2C	/* Auto Level Control settings */
+#define REG_VOFFSET		0x2E	/* V channel offset adjustment */
+#define REG_ARRAY_BIAS		0x2F	/* array bias -- don't change */
+#define REG_YGAMMA		0x33	/* misc gamma settings [7:6] */
+#define REG_BIAS_ADJUST		0x34	/* misc bias settings */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3a
+#define VWSBASE 0x05
+#define VWEBASE 0x05
+
+struct ov76be {
+	int auto_brt;
+	int auto_exp;
+	int bandfilt;
+	int mirror;
+};
+
+/* NOTE: These are the same as the 7x10 settings, but should eventually be
+ * optimized for the OV76BE */
+static struct ovcamchip_regvals regvals_init_76be[] = {
+	{ 0x10, 0xff },
+	{ 0x16, 0x03 },
+	{ 0x28, 0x24 },
+	{ 0x2b, 0xac },
+	{ 0x12, 0x00 },
+	{ 0x38, 0x81 },
+	{ 0x28, 0x24 },	/* 0c */
+	{ 0x0f, 0x85 },	/* lg's setting */
+	{ 0x15, 0x01 },
+	{ 0x20, 0x1c },
+	{ 0x23, 0x2a },
+	{ 0x24, 0x10 },
+	{ 0x25, 0x8a },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xc2 },
+	{ 0x2a, 0x04 },
+	{ 0x2c, 0xfe },
+	{ 0x2d, 0x93 },
+	{ 0x30, 0x71 },
+	{ 0x31, 0x60 },
+	{ 0x32, 0x26 },
+	{ 0x33, 0x20 },
+	{ 0x34, 0x48 },
+	{ 0x12, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0xff, 0xff },	/* END MARKER */
+};
+
+/* This initializes the OV76be camera chip and relevant variables. */
+static int ov76be_init(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov76be *s;
+	int rc;
+
+	DDEBUG(4, &c->dev, "entered");
+
+	rc = ov_write_regvals(c, regvals_init_76be);
+	if (rc < 0)
+		return rc;
+
+	ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+	if (!s)
+		return -ENOMEM;
+	memset(s, 0, sizeof *s);
+
+	s->auto_brt = 1;
+	s->auto_exp = 1;
+
+	return rc;
+}
+
+static int ov76be_free(struct i2c_client *c)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+
+	kfree(ov->spriv);
+	return 0;
+}
+
+static int ov76be_set_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov76be *s = ov->spriv;
+	int rc;
+	int v = ctl->value;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_write(c, REG_BRT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_write(c, REG_SAT, v >> 8);
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_write(c, REG_EXP, v);
+		break;
+	case OVCAMCHIP_CID_FREQ:
+	{
+		int sixty = (v == 60);
+
+		rc = ov_write_mask(c, 0x2a, sixty?0x00:0x80, 0x80);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write(c, 0x2b, sixty?0x00:0xac);
+		if (rc < 0)
+			goto out;
+
+		rc = ov_write_mask(c, 0x76, 0x01, 0x01);
+		break;
+	}
+	case OVCAMCHIP_CID_BANDFILT:
+		rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+		s->bandfilt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+		s->auto_brt = v;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		rc = ov_write_mask(c, 0x13, v?0x01:0x00, 0x01);
+		s->auto_exp = v;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+		s->mirror = v;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+out:
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+	return rc;
+}
+
+static int ov76be_get_control(struct i2c_client *c,
+			      struct ovcamchip_control *ctl)
+{
+	struct ovcamchip *ov = i2c_get_clientdata(c);
+	struct ov76be *s = ov->spriv;
+	int rc = 0;
+	unsigned char val = 0;
+
+	switch (ctl->id) {
+	case OVCAMCHIP_CID_BRIGHT:
+		rc = ov_read(c, REG_BRT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_SAT:
+		rc = ov_read(c, REG_SAT, &val);
+		ctl->value = val << 8;
+		break;
+	case OVCAMCHIP_CID_EXP:
+		rc = ov_read(c, REG_EXP, &val);
+		ctl->value = val;
+		break;
+	case OVCAMCHIP_CID_BANDFILT:
+		ctl->value = s->bandfilt;
+		break;
+	case OVCAMCHIP_CID_AUTOBRIGHT:
+		ctl->value = s->auto_brt;
+		break;
+	case OVCAMCHIP_CID_AUTOEXP:
+		ctl->value = s->auto_exp;
+		break;
+	case OVCAMCHIP_CID_MIRROR:
+		ctl->value = s->mirror;
+		break;
+	default:
+		DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+		return -EPERM;
+	}
+
+	DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+	return rc;
+}
+
+static int ov76be_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int qvga = win->quarter;
+
+	/******** QVGA-specific regs ********/
+
+	ov_write(c, 0x14, qvga?0xa4:0x84);
+
+	/******** Palette-specific regs ********/
+
+	if (win->format == VIDEO_PALETTE_GREY) {
+		ov_write_mask(c, 0x0e, 0x40, 0x40);
+		ov_write_mask(c, 0x13, 0x20, 0x20);
+	} else {
+		ov_write_mask(c, 0x0e, 0x00, 0x40);
+		ov_write_mask(c, 0x13, 0x00, 0x20);
+	}
+
+	/******** Clock programming ********/
+
+	ov_write(c, 0x11, win->clockdiv);
+
+	/******** Resolution-specific ********/
+
+	if (win->width == 640 && win->height == 480)
+		ov_write(c, 0x35, 0x9e);
+	else
+		ov_write(c, 0x35, 0x1e);
+
+	return 0;
+}
+
+static int ov76be_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+	int ret, hwscale, vwscale;
+
+	ret = ov76be_mode_init(c, win);
+	if (ret < 0)
+		return ret;
+
+	if (win->quarter) {
+		hwscale = 1;
+		vwscale = 0;
+	} else {
+		hwscale = 2;
+		vwscale = 1;
+	}
+
+	ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+	ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+	ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+	ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+	return 0;
+}
+
+static int ov76be_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+	switch (cmd) {
+	case OVCAMCHIP_CMD_S_CTRL:
+		return ov76be_set_control(c, arg);
+	case OVCAMCHIP_CMD_G_CTRL:
+		return ov76be_get_control(c, arg);
+	case OVCAMCHIP_CMD_S_MODE:
+		return ov76be_set_window(c, arg);
+	default:
+		DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+		return -ENOIOCTLCMD;
+	}
+}
+
+struct ovcamchip_ops ov76be_ops = {
+	.init    =	ov76be_init,
+	.free    =	ov76be_free,
+	.command =	ov76be_command,
+};