diff options
| author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-07-09 23:17:58 +0200 |
|---|---|---|
| committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-07-09 23:17:58 +0200 |
| commit | 49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb (patch) | |
| tree | f61c34da6092f2f1a97a78da567afc59ad40850b /drivers/ide/pci/it8213.c | |
| parent | 75b1d97535327d0428c6bffd9d5407e65546fd5d (diff) | |
| download | kernel-crypto-49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb.tar.gz kernel-crypto-49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb.tar.xz kernel-crypto-49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb.zip | |
ide: add short cables support
This patch allows users to override both host and device side cable detection
with "ideX=ata66" kernel parameter. Thanks to this it should be now possible
to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable
instead of 80-pin one.
Next patches add automatic detection of some systems using short cables.
Changes:
* Rename hwif->udma_four to hwif->cbl and make it u8.
* Convert all existing users accordingly (use ATA_CBL_* defines while at it).
* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().
* Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Diffstat (limited to 'drivers/ide/pci/it8213.c')
| -rw-r--r-- | drivers/ide/pci/it8213.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index c04a02687b9..ff48c23e571 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -231,7 +231,7 @@ static int it8213_config_drive_for_dma (ide_drive_t *drive) static void __devinit init_hwif_it8213(ide_hwif_t *hwif) { - u8 reg42h = 0, ata66 = 0; + u8 reg42h = 0; hwif->speedproc = &it8213_tune_chipset; hwif->tuneproc = &it8213_tuneproc; @@ -250,11 +250,11 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif) hwif->swdma_mask = 0x04; pci_read_config_byte(hwif->pci_dev, 0x42, ®42h); - ata66 = (reg42h & 0x02) ? 0 : 1; hwif->ide_dma_check = &it8213_config_drive_for_dma; - if (!(hwif->udma_four)) - hwif->udma_four = ata66; + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; /* * The BIOS often doesn't set up DMA on this controller |