sh: sh775x/titan fixes for irq header changes.

The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

8 files changed, 134 insertions, 126 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 013732074d3..d83d64af31f 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -375,6 +375,9 @@ config CPU_HAS_MASKREG_IRQ
 config CPU_HAS_INTC2_IRQ
 	bool
 
+config CPU_HAS_IPR_IRQ
+	bool
+
 config CPU_HAS_SR_RB
 	bool "CPU has SR.RB"
 	depends on CPU_SH3 || CPU_SH4
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c
index a6046d93758..6bcd939bfae 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/titan/setup.c
@@ -1,26 +1,30 @@
 /*
- *	Setup for Titan
+ * arch/sh/boards/titan/setup.c - Setup for Titan
+ *
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  */
-
 #include <linux/init.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
 #include <asm/titan.h>
 #include <asm/io.h>
 
-extern void __init pcibios_init_platform(void);
-
 static struct ipr_data titan_ipr_map[] = {
-	{ TITAN_IRQ_WAN,	IRL0_IPR_ADDR,	IRL0_IPR_POS,	IRL0_PRIORITY },
-	{ TITAN_IRQ_LAN,	IRL1_IPR_ADDR,	IRL1_IPR_POS,	IRL1_PRIORITY },
-	{ TITAN_IRQ_MPCIA,	IRL2_IPR_ADDR,	IRL2_IPR_POS,	IRL2_PRIORITY },
-	{ TITAN_IRQ_USB,	IRL3_IPR_ADDR,	IRL3_IPR_POS,	IRL3_PRIORITY },
+	/* IRQ, IPR idx, shift, prio */
+	{ TITAN_IRQ_WAN,   3, 12, 8 },	/* eth0 (WAN) */
+	{ TITAN_IRQ_LAN,   3,  8, 8 },	/* eth1 (LAN) */
+	{ TITAN_IRQ_MPCIA, 3,  4, 8 },	/* mPCI A (top) */
+	{ TITAN_IRQ_USB,   3,  0, 8 },	/* mPCI B (bottom), USB */
 };
 
 static void __init init_titan_irq(void)
 {
 	/* enable individual interrupt mode for externals */
-	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-
+	ipr_irq_enable_irlm();
+	/* register ipr irqs */
 	make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map));
 }
 
@@ -47,6 +51,5 @@ struct sh_machine_vector mv_titan __initmv = {
 	.mv_ioport_map = titan_ioport_map,
 
 	.mv_init_irq =	init_titan_irq,
-	.mv_init_pci =	pcibios_init_platform,
 };
 ALIAS_MV(titan)
diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c
index cd56d53375e..ac8ee2312cd 100644
--- a/arch/sh/drivers/pci/ops-titan.c
+++ b/arch/sh/drivers/pci/ops-titan.c
@@ -15,25 +15,21 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/titan.h>
 #include "pci-sh4.h"
 
+static char titan_irq_tab[] __initdata = {
+	TITAN_IRQ_WAN,
+	TITAN_IRQ_LAN,
+	TITAN_IRQ_MPCIA,
+	TITAN_IRQ_MPCIB,
+	TITAN_IRQ_USB,
+};
+
 int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 {
-	int irq = -1;
-
-	switch (slot) {
-	case 0: irq = TITAN_IRQ_WAN;   break;	/* eth0 (WAN) */
-	case 1: irq = TITAN_IRQ_LAN;   break;	/* eth1 (LAN) */
-	case 2: irq = TITAN_IRQ_MPCIA; break;	/* mPCI A */
-	case 3: irq = TITAN_IRQ_MPCIB; break;	/* mPCI B */
-	case 4: irq = TITAN_IRQ_USB;   break;	/* USB */
-	default:
-		printk(KERN_INFO "PCI: Bad IRQ mapping "
-				 "request for slot %d\n", slot);
-		return -1;
-	}
+	int irq = titan_irq_tab[slot];
 
 	printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
 		slot, pin - 1 + 'A', irq);
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 1c034c283f5..0049d217561 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -1,8 +1,9 @@
 #
 # Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
 #
-obj-y	+= ipr.o imask.o
+obj-y	+= imask.o
 
+obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
 obj-$(CONFIG_CPU_HAS_PINT_IRQ)		+= pint.o
 obj-$(CONFIG_CPU_HAS_MASKREG_IRQ)	+= maskreg.o
 obj-$(CONFIG_CPU_HAS_INTC2_IRQ)		+= intc2.o
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index a181ccdf290..35eb5751a3a 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -25,17 +25,15 @@
 static void disable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
-	int shift = p->shift*4;
 	/* Set the priority in IPR to 0 */
-	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr);
+	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
 }
 
 static void enable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
-	int shift = p->shift*4;
 	/* Set priority in IPR back to original value */
-	ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr);
+	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
 }
 
 static struct irq_chip ipr_irq_chip = {
@@ -51,6 +49,10 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
 
 	for (i = 0; i < nr_irqs; i++) {
 		unsigned int irq = table[i].irq;
+		table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
+		/* could the IPR index be mapped, if not we ignore this */
+		if (table[i].addr == 0)
+			continue;
 		disable_irq_nosync(irq);
 		set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
 				      handle_level_irq, "level");
@@ -60,99 +62,6 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
 }
 EXPORT_SYMBOL(make_ipr_irq);
 
-/*
- * XXX: Move this garbage in to the drivers, and kill off the ridiculous CPU
- * subtype checks.
- */
-static struct ipr_data sys_ipr_map[] = {
-#ifndef CONFIG_CPU_SUBTYPE_SH7780
-	{ TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY },
-	{ TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY },
-#ifdef RTC_IRQ
-	{ RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY },
-#endif
-#ifdef SCI_ERI_IRQ
-	{ SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-	{ SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-	{ SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-#endif
-#ifdef SCIF1_ERI_IRQ
-	{ SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-#endif
-#ifdef SCIF2_ERI_IRQ
-	{ SCIF2_ERI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-	{ SCIF2_RXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-	{ SCIF2_BRI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-	{ SCIF2_TXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-#endif
-#ifdef SCIF3_ERI_IRQ
-	{ SCIF3_ERI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-	{ SCIF3_RXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-	{ SCIF3_BRI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-	{ SCIF3_TXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-	{ SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-#endif
-#ifdef SCIF_ERI_IRQ
-	{ SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-#endif
-#ifdef IRDA_ERI_IRQ
-	{ IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
-	/*
-	 * Initialize the Interrupt Controller (INTC)
-	 * registers to their power on values
-	 */
-
-	/*
-	 * Enable external irq (INTC IRQ mode).
-	 * You should set corresponding bits of PFC to "00"
-	 * to enable these interrupts.
-	 */
-	{ IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY },
-	{ IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
-	{ IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
-	{ IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY },
-	{ IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY },
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY },
-#endif
-#endif
-};
-
-void __init init_IRQ(void)
-{
-	make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map));
-
-#ifdef CONFIG_CPU_HAS_PINT_IRQ
-	init_IRQ_pint();
-#endif
-
-#ifdef CONFIG_CPU_HAS_INTC2_IRQ
-	init_IRQ_intc2();
-#endif
-	/* Perform the machine specific initialisation */
-	if (sh_mv.mv_init_irq != NULL)
-		sh_mv.mv_init_irq();
-
-	irq_ctx_init(smp_processor_id());
-}
-
 #if !defined(CONFIG_CPU_HAS_PINT_IRQ)
 int ipr_irq_demux(int irq)
 {
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 50812d57c1c..bbcb06f18b0 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -2,6 +2,7 @@
  * SH7750/SH7751 Setup
  *
  *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006  Jamie Lenehan
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -10,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 #include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -46,3 +48,71 @@ static int __init sh7750_devices_setup(void)
 				    ARRAY_SIZE(sh7750_devices));
 }
 __initcall(sh7750_devices_setup);
+
+static struct ipr_data sh7750_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, priority */
+	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
+	{ 17, 0, 12, 2 }, /* TMU1 TUNI */
+	{ 18, 0,  4, 2 }, /* TMU2 TUNI */
+	{ 19, 0,  4, 2 }, /* TMU2 TIPCI */
+	{ 27, 1, 12, 2 }, /* WDT ITI */
+	{ 20, 0,  0, 2 }, /* RTC ATI (alarm) */
+	{ 21, 0,  0, 2 }, /* RTC PRI (period) */
+	{ 22, 0,  0, 2 }, /* RTC CUI (carry) */
+	{ 23, 1,  4, 3 }, /* SCI ERI */
+	{ 24, 1,  4, 3 }, /* SCI RXI */
+	{ 25, 1,  4, 3 }, /* SCI TXI */
+	{ 40, 2,  4, 3 }, /* SCIF ERI */
+	{ 41, 2,  4, 3 }, /* SCIF RXI */
+	{ 42, 2,  4, 3 }, /* SCIF BRI */
+	{ 43, 2,  4, 3 }, /* SCIF TXI */
+	{ 34, 2,  8, 7 }, /* DMAC DMTE0 */
+	{ 35, 2,  8, 7 }, /* DMAC DMTE1 */
+	{ 36, 2,  8, 7 }, /* DMAC DMTE2 */
+	{ 37, 2,  8, 7 }, /* DMAC DMTE3 */
+	{ 28, 2,  8, 7 }, /* DMAC DMAE */
+};
+
+static struct ipr_data sh7751_ipr_map[] = {
+	{ 44, 2,  8, 7 }, /* DMAC DMTE4 */
+	{ 45, 2,  8, 7 }, /* DMAC DMTE5 */
+	{ 46, 2,  8, 7 }, /* DMAC DMTE6 */
+	{ 47, 2,  8, 7 }, /* DMAC DMTE7 */
+	/* The following use INTC_INPRI00 for masking, which is a 32-bit
+	   register, not a 16-bit register like the IPRx registers, so it
+	   would need special support */
+	/*{ 72, INTPRI00,  8, ? },*/ /* TMU3 TUNI */
+	/*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xffd00004UL,	/* 0: IPRA */
+	0xffd00008UL,	/* 1: IPRB */
+	0xffd0000cUL,	/* 2: IPRC */
+	0xffd00010UL,	/* 3: IPRD */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (idx >= ARRAY_SIZE(ipr_offsets))
+		return 0;
+	return ipr_offsets[idx];
+}
+
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM   (1<<7)
+
+/* enable individual interrupt mode for external interupts */
+void ipr_irq_enable_irlm(void)
+{
+	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+}
+
+void __init init_IRQ_ipr()
+{
+	make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map));
+#ifdef CONFIG_CPU_SUBTYPE_SH7751
+	make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map));
+#endif
+}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 46a19e07abd..67be2b6e8cd 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -12,7 +12,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
@@ -112,7 +112,7 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
 #endif
 
 #ifdef CONFIG_CPU_HAS_INTEVT
-	irq = (ctrl_inl(INTEVT) >> 5) - 16;
+	irq = evt2irq(ctrl_inl(INTEVT));
 #else
 	irq = r4;
 #endif
@@ -261,3 +261,24 @@ asmlinkage void do_softirq(void)
 }
 EXPORT_SYMBOL(do_softirq);
 #endif
+
+void __init init_IRQ(void)
+{
+#ifdef CONFIG_CPU_HAS_PINT_IRQ
+	init_IRQ_pint();
+#endif
+
+#ifdef CONFIG_CPU_HAS_INTC2_IRQ
+	init_IRQ_intc2();
+#endif
+
+#ifdef CONFIG_CPU_HAS_IPR_IRQ
+	init_IRQ_ipr();
+#endif
+
+	/* Perform the machine specific initialisation */
+	if (sh_mv.mv_init_irq)
+		sh_mv.mv_init_irq();
+
+	irq_ctx_init(smp_processor_id());
+}
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 6cd6d0045d1..4e0362f5038 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -104,6 +104,7 @@ comment "SH-4 Processor Support"
 config CPU_SUBTYPE_SH7750
 	bool "Support SH7750 processor"
 	select CPU_SH4
+	select CPU_HAS_IPR_IRQ
 	help
 	  Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
 
@@ -119,15 +120,18 @@ config CPU_SUBTYPE_SH7750R
 	bool "Support SH7750R processor"
 	select CPU_SH4
 	select CPU_SUBTYPE_SH7750
+	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7750S
 	bool "Support SH7750S processor"
 	select CPU_SH4
 	select CPU_SUBTYPE_SH7750
+	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7751
 	bool "Support SH7751 processor"
 	select CPU_SH4
+	select CPU_HAS_IPR_IRQ
 	help
 	  Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
 	  or if you have a HD6417751R CPU.
@@ -136,6 +140,7 @@ config CPU_SUBTYPE_SH7751R
 	bool "Support SH7751R processor"
 	select CPU_SH4
 	select CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
 
 config CPU_SUBTYPE_SH7760
 	bool "Support SH7760 processor"