Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (171 commits)
  Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value
  Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards
  Blackfin arch: fix bug: kernel crash when enable SDIO host driver
  Blackfin arch: Print FP at level KERN_NOTICE
  Blackfin arch: drop ad73311 test code
  Blackfin arch: update board default configs
  Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.
  Blackfin arch: fix typo in early printk bit size processing
  Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd
  Blackfin arch: add SDIO host driver platform data
  Blackfin arch: fix bug - kernel stops at initial console
  Blackfin arch: fix bug - kernel crash after config IP for ethernet port
  Blackfin arch: add sdh support for bf518f-ezbrd
  Blackfin arch: fix bug - kernel detects BF532 incorrectly
  Blackfin arch: add () to avoid warnings from gcc
  Blackfin arch: change HWTRACE Kconfig and set it on default
  Blackfin arch: Clean oprofile build path for blackfin
  Blackfin arch: remove hardware PM code, oprofile not use it
  Blackfin arch: rewrite get_sclk()/get_vco()
  Blackfin arch: cleanup and unify the ins functions
  ...

21 files changed, 659 insertions, 845 deletions

diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig
index 8255374c04a..bbc08fd4f12 100644
--- a/arch/blackfin/mach-bf537/Kconfig
+++ b/arch/blackfin/mach-bf537/Kconfig
@@ -64,29 +64,29 @@ config IRQ_MAC_RX
 config IRQ_MAC_TX
 	int "IRQ_MAC_TX"
 	default 11
-config IRQ_TMR0
-	int "IRQ_TMR0"
-	default 12
-config IRQ_TMR1
-	int "IRQ_TMR1"
+config IRQ_TIMER0
+	int "IRQ_TIMER0"
+	default 8
+config IRQ_TIMER1
+	int "IRQ_TIMER1"
 	default 12
-config IRQ_TMR2
-	int "IRQ_TMR2"
+config IRQ_TIMER2
+	int "IRQ_TIMER2"
 	default 12
-config IRQ_TMR3
-	int "IRQ_TMR3"
+config IRQ_TIMER3
+	int "IRQ_TIMER3"
 	default 12
-config IRQ_TMR4
-	int "IRQ_TMR4"
+config IRQ_TIMER4
+	int "IRQ_TIMER4"
 	default 12
-config IRQ_TMR5
-	int "IRQ_TMR5"
+config IRQ_TIMER5
+	int "IRQ_TIMER5"
 	default 12
-config IRQ_TMR6
-	int "IRQ_TMR6"
+config IRQ_TIMER6
+	int "IRQ_TIMER6"
 	default 12
-config IRQ_TMR7
-	int "IRQ_TMR7"
+config IRQ_TIMER7
+	int "IRQ_TIMER7"
 	default 12
 config IRQ_PROG_INTA
 	int "IRQ_PROG_INTA"
diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile
index 68e5478e95a..56994b675f9 100644
--- a/arch/blackfin/mach-bf537/Makefile
+++ b/arch/blackfin/mach-bf537/Makefile
@@ -2,6 +2,4 @@
 # arch/blackfin/mach-bf537/Makefile
 #
 
-extra-y := head.o
-
 obj-y := ints-priority.o dma.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index dde14720b0e..6ac8e4d5bd3 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -308,6 +308,19 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
 	{
@@ -379,30 +392,57 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
 #ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
 	{
 		.start = 0xFFC00400,
 		.end = 0xFFC004FF,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
 #endif
 #ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
 	{
 		.start = 0xFFC02000,
 		.end = 0xFFC020FF,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
 };
-
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir1_device = {
 	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir_resources),
-	.resource = bfin_sir_resources,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
 };
 #endif
+#endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
@@ -525,7 +565,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-	&bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
 #endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
@@ -564,6 +609,8 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 	&cm_flash_device,
 #endif
+
+	&bfin_gpios_device,
 };
 
 static int __init cm_bf537_init(void)
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 78a13d5bfd5..dd6e6bfb98e 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -50,57 +50,46 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "GENERIC Board";
+const char bfin_board_name[] = "UNKNOWN BOARD";
 
 /*
  *  Driver needs to know address, irq and flag pin.
  */
 
-#define ISP1761_BASE       0x203C0000
-#define ISP1761_IRQ        IRQ_PF7
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-static struct resource bfin_isp1761_resources[] = {
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
 	[0] = {
-		.name	= "isp1761-regs",
-		.start  = ISP1761_BASE + 0x00000000,
-		.end    = ISP1761_BASE + 0x000fffff,
+		.start  = 0x203C0000,
+		.end    = 0x203C0000 + 0x000fffff,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = ISP1761_IRQ,
-		.end    = ISP1761_IRQ,
+		.start  = IRQ_PF7,
+		.end    = IRQ_PF7,
 		.flags  = IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device bfin_isp1761_device = {
-	.name           = "isp1761",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
-	.resource       = bfin_isp1761_resources,
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.port1_disable = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
 };
 
-static struct platform_device *bfin_isp1761_devices[] = {
-	&bfin_isp1761_device,
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760-hcd",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
 };
-
-int __init bfin_isp1761_init(void)
-{
-	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
-
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
-
-	return platform_add_devices(bfin_isp1761_devices, num_devices);
-}
-
-void __exit bfin_isp1761_exit(void)
-{
-	platform_device_unregister(&bfin_isp1761_device);
-}
-
-arch_initcall(bfin_isp1761_init);
 #endif
 
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
@@ -559,30 +548,59 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
 #ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
 	{
 		.start = 0xFFC00400,
 		.end = 0xFFC004FF,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
 #endif
 #ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
 	{
 		.start = 0xFFC02000,
 		.end = 0xFFC020FF,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir1_device = {
 	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir_resources),
-	.resource = bfin_sir_resources,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
 };
 #endif
+#endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
@@ -651,6 +669,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&net2272_bfin_device,
 #endif
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+	&bfin_isp1760_device,
+#endif
+
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
@@ -668,7 +690,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-	&bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
 #endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index 48c4cd2d1be..bb795341cb1 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -226,30 +226,59 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
 #ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
 	{
 		.start = 0xFFC00400,
 		.end = 0xFFC004FF,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
 #endif
 #ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
 	{
 		.start = 0xFFC02000,
 		.end = 0xFFC020FF,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir1_device = {
 	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir_resources),
-	.resource = bfin_sir_resources,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
 };
 #endif
+#endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
@@ -311,7 +340,12 @@ static struct platform_device *minotaur_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-	&bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
 #endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index f9174c11cbd..89de94f4545 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -49,7 +49,7 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "PNAV-1.0";
+const char bfin_board_name[] = "ADI PNAV-1.0";
 
 /*
  *  Driver needs to know address, irq and flag pin.
@@ -453,30 +453,59 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
 #ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
 	{
 		.start = 0xFFC00400,
 		.end = 0xFFC004FF,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
 #endif
 #ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
 	{
 		.start = 0xFFC02000,
 		.end = 0xFFC020FF,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir1_device = {
 	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir_resources),
-	.resource = bfin_sir_resources,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
 };
 #endif
+#endif
 
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
@@ -520,7 +549,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-	&bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
 #endif
 };
 
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 8d394393201..d812e2514a2 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -46,6 +46,7 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/usb/sl811.h>
+#include <linux/spi/mmc_spi.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
@@ -55,57 +56,46 @@
 /*
  * Name the Board for the /proc/cpuinfo
  */
-const char bfin_board_name[] = "ADDS-BF537-STAMP";
+const char bfin_board_name[] = "ADI BF537-STAMP";
 
 /*
  *  Driver needs to know address, irq and flag pin.
  */
 
-#define ISP1761_BASE       0x203C0000
-#define ISP1761_IRQ        IRQ_PF7
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-static struct resource bfin_isp1761_resources[] = {
+#include <linux/usb/isp1760.h>
+static struct resource bfin_isp1760_resources[] = {
 	[0] = {
-		.name	= "isp1761-regs",
-		.start  = ISP1761_BASE + 0x00000000,
-		.end    = ISP1761_BASE + 0x000fffff,
+		.start  = 0x203C0000,
+		.end    = 0x203C0000 + 0x000fffff,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = ISP1761_IRQ,
-		.end    = ISP1761_IRQ,
-		.flags  = IORESOURCE_IRQ,
+		.start  = IRQ_PF7,
+		.end    = IRQ_PF7,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
-static struct platform_device bfin_isp1761_device = {
-	.name           = "isp1761",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
-	.resource       = bfin_isp1761_resources,
+static struct isp1760_platform_data isp1760_priv = {
+	.is_isp1761 = 0,
+	.port1_disable = 0,
+	.bus_width_16 = 1,
+	.port1_otg = 0,
+	.analog_oc = 0,
+	.dack_polarity_high = 0,
+	.dreq_polarity_high = 0,
 };
 
-static struct platform_device *bfin_isp1761_devices[] = {
-	&bfin_isp1761_device,
+static struct platform_device bfin_isp1760_device = {
+	.name           = "isp1760-hcd",
+	.id             = 0,
+	.dev = {
+		.platform_data = &isp1760_priv,
+	},
+	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
+	.resource       = bfin_isp1760_resources,
 };
-
-int __init bfin_isp1761_init(void)
-{
-	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
-
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
-
-	return platform_add_devices(bfin_isp1761_devices, num_devices);
-}
-
-void __exit bfin_isp1761_exit(void)
-{
-	platform_device_unregister(&bfin_isp1761_device);
-}
-
-arch_initcall(bfin_isp1761_init);
 #endif
 
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -443,11 +433,11 @@ static struct mtd_partition stamp_partitions[] = {
 		.offset     = 0,
 	}, {
 		.name       = "linux kernel(nor)",
-		.size       = 0xE0000,
+		.size       = 0x180000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "file system(nor)",
-		.size       = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
+		.size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
 		.offset     = MTDPART_OFS_APPEND,
 	}, {
 		.name       = "MAC Address(nor)",
@@ -490,7 +480,7 @@ static struct mtd_partition bfin_spi_flash_partitions[] = {
 		.mask_flags = MTD_CAP_ROM
 	}, {
 		.name = "linux kernel(spi)",
-		.size = 0xe0000,
+		.size = 0x180000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name = "file system(spi)",
@@ -503,7 +493,7 @@ static struct flash_platform_data bfin_spi_flash_data = {
 	.name = "m25p80",
 	.parts = bfin_spi_flash_partitions,
 	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
+	/* .type = "m25p64", */
 };
 
 /* SPI flash chip (m25p64) */
@@ -537,9 +527,29 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+
+static int bfin_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+		IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+	.init = bfin_mmc_spi_init,
+	.exit = bfin_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -613,6 +623,14 @@ static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
+	.enable_dma	= 1,
+	.bits_per_word	= 8,
+	.cs_gpio = GPIO_PF10,
+};
+#endif
+
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 
@@ -624,7 +642,7 @@ static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 		.mask_flags = MTD_CAP_ROM
 	}, {
 		.name = "linux kernel(spi)",
-		.size = 0xe0000,
+		.size = 0x180000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
 		.name = "file system(spi)",
@@ -703,23 +721,14 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 4,
+		.platform_data = &bfin_mmc_spi_pdata,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
@@ -783,6 +792,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.mode = SPI_CPHA | SPI_CPOL,
 	},
 #endif
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
+	{
+		.modalias = "enc28j60",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.irq = IRQ_PF6,
+		.bus_num = 0,
+		.chip_select = 0,	/* GPIO controlled SSEL */
+		.controller_data = &enc28j60_spi_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
@@ -885,30 +905,59 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
 #ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
 	{
 		.start = 0xFFC00400,
 		.end = 0xFFC004FF,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
 #endif
 #ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
 	{
 		.start = 0xFFC02000,
 		.end = 0xFFC020FF,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir1_device = {
 	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir_resources),
-	.resource = bfin_sir_resources,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
 };
 #endif
+#endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
@@ -932,6 +981,93 @@ static struct platform_device i2c_bfin_twi_device = {
 };
 #endif
 
+#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+#include <linux/input.h>
+#include <linux/i2c/adp5588_keys.h>
+static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
+	[0]	 = KEY_GRAVE,
+	[1]	 = KEY_1,
+	[2]	 = KEY_2,
+	[3]	 = KEY_3,
+	[4]	 = KEY_4,
+	[5]	 = KEY_5,
+	[6]	 = KEY_6,
+	[7]	 = KEY_7,
+	[8]	 = KEY_8,
+	[9]	 = KEY_9,
+	[10]	 = KEY_0,
+	[11]	 = KEY_MINUS,
+	[12]	 = KEY_EQUAL,
+	[13]	 = KEY_BACKSLASH,
+	[15]	 = KEY_KP0,
+	[16]	 = KEY_Q,
+	[17]	 = KEY_W,
+	[18]	 = KEY_E,
+	[19]	 = KEY_R,
+	[20]	 = KEY_T,
+	[21]	 = KEY_Y,
+	[22]	 = KEY_U,
+	[23]	 = KEY_I,
+	[24]	 = KEY_O,
+	[25]	 = KEY_P,
+	[26]	 = KEY_LEFTBRACE,
+	[27]	 = KEY_RIGHTBRACE,
+	[29]	 = KEY_KP1,
+	[30]	 = KEY_KP2,
+	[31]	 = KEY_KP3,
+	[32]	 = KEY_A,
+	[33]	 = KEY_S,
+	[34]	 = KEY_D,
+	[35]	 = KEY_F,
+	[36]	 = KEY_G,
+	[37]	 = KEY_H,
+	[38]	 = KEY_J,
+	[39]	 = KEY_K,
+	[40]	 = KEY_L,
+	[41]	 = KEY_SEMICOLON,
+	[42]	 = KEY_APOSTROPHE,
+	[43]	 = KEY_BACKSLASH,
+	[45]	 = KEY_KP4,
+	[46]	 = KEY_KP5,
+	[47]	 = KEY_KP6,
+	[48]	 = KEY_102ND,
+	[49]	 = KEY_Z,
+	[50]	 = KEY_X,
+	[51]	 = KEY_C,
+	[52]	 = KEY_V,
+	[53]	 = KEY_B,
+	[54]	 = KEY_N,
+	[55]	 = KEY_M,
+	[56]	 = KEY_COMMA,
+	[57]	 = KEY_DOT,
+	[58]	 = KEY_SLASH,
+	[60]	 = KEY_KPDOT,
+	[61]	 = KEY_KP7,
+	[62]	 = KEY_KP8,
+	[63]	 = KEY_KP9,
+	[64]	 = KEY_SPACE,
+	[65]	 = KEY_BACKSPACE,
+	[66]	 = KEY_TAB,
+	[67]	 = KEY_KPENTER,
+	[68]	 = KEY_ENTER,
+	[69]	 = KEY_ESC,
+	[70]	 = KEY_DELETE,
+	[74]	 = KEY_KPMINUS,
+	[76]	 = KEY_UP,
+	[77]	 = KEY_DOWN,
+	[78]	 = KEY_RIGHT,
+	[79]	 = KEY_LEFT,
+};
+
+static struct adp5588_kpad_platform_data adp5588_kpad_data = {
+	.rows		= 8,
+	.cols		= 10,
+	.keymap		= adp5588_keymap,
+	.keymapsize	= ARRAY_SIZE(adp5588_keymap),
+	.repeat		= 0,
+};
+#endif
+
 #ifdef CONFIG_I2C_BOARDINFO
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
@@ -958,6 +1094,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.platform_data = (void *)&bfin_ad7879_ts_info,
 	},
 #endif
+#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
+	{
+		I2C_BOARD_INFO("adp5588-keys", 0x34),
+		.irq = IRQ_PG0,
+		.platform_data = (void *)&adp5588_kpad_data,
+	},
+#endif
 };
 #endif
 
@@ -1057,6 +1200,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&isp1362_hcd_device,
 #endif
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+	&bfin_isp1760_device,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif
@@ -1098,7 +1245,12 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-	&bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
 #endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index d5ff705a512..2f4b066153c 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -308,6 +308,19 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 static struct mtd_partition cm_partitions[] = {
 	{
@@ -379,30 +392,59 @@ static struct platform_device bfin_uart_device = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-static struct resource bfin_sir_resources[] = {
 #ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
 	{
 		.start = 0xFFC00400,
 		.end = 0xFFC004FF,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_RX,
+		.end = IRQ_UART0_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART0_RX,
+		.end = CH_UART0_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device bfin_sir0_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
+	.resource = bfin_sir0_resources,
+};
 #endif
 #ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
 	{
 		.start = 0xFFC02000,
 		.end = 0xFFC020FF,
 		.flags = IORESOURCE_MEM,
 	},
-#endif
+	{
+		.start = IRQ_UART1_RX,
+		.end = IRQ_UART1_RX+1,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = CH_UART1_RX,
+		.end = CH_UART1_RX+1,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
-static struct platform_device bfin_sir_device = {
+static struct platform_device bfin_sir1_device = {
 	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir_resources),
-	.resource = bfin_sir_resources,
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
+	.resource = bfin_sir1_resources,
 };
 #endif
+#endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 static struct resource bfin_twi0_resource[] = {
@@ -525,7 +567,12 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-	&bfin_sir_device,
+#ifdef CONFIG_BFIN_SIR0
+	&bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	&bfin_sir1_device,
+#endif
 #endif
 
 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
@@ -564,6 +611,8 @@ static struct platform_device *cm_bf537_devices[] __initdata = {
 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 	&cm_flash_device,
 #endif
+
+	&bfin_gpios_device,
 };
 
 static int __init cm_bf537_init(void)
diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c
index 4edb363ff99..81185051de9 100644
--- a/arch/blackfin/mach-bf537/dma.c
+++ b/arch/blackfin/mach-bf537/dma.c
@@ -31,7 +31,7 @@
 #include <asm/blackfin.h>
 #include <asm/dma.h>
 
-struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+struct dma_register *dma_io_base_addr[MAX_DMA_CHANNELS] = {
 	(struct dma_register *) DMA0_NEXT_DESC_PTR,
 	(struct dma_register *) DMA1_NEXT_DESC_PTR,
 	(struct dma_register *) DMA2_NEXT_DESC_PTR,
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
deleted file mode 100644
index f5c94bf80e3..00000000000
--- a/arch/blackfin/mach-bf537/head.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/head.S
- * Based on:     arch/blackfin/mach-bf533/head.S
- * Author:       Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
- *
- * Created:      1998
- * Description:  Startup code for Blackfin BF537
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/blackfin.h>
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/clocks.h>
-#include <mach/mem_init.h>
-#endif
-
-.section .l1.text
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-ENTRY(_start_dma_code)
-
-	/* Enable PHY CLK buffer output */
-	p0.h = hi(VR_CTL);
-	p0.l = lo(VR_CTL);
-	r0.l = w[p0];
-	bitset(r0, 14);
-	w[p0] = r0.l;
-	ssync;
-
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = 0x1;
-	r0.h = 0x0;
-	[p0] = r0;
-	SSYNC;
-
-	/*
-	 *  Set PLL_CTL
-	 *   - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
-	 *   - [8]     = BYPASS    : BYPASS the PLL, run CLKIN into CCLK/SCLK
-	 *   - [7]     = output delay (add 200ps of delay to mem signals)
-	 *   - [6]     = input delay (add 200ps of input delay to mem signals)
-	 *   - [5]     = PDWN      : 1=All Clocks off
-	 *   - [3]     = STOPCK    : 1=Core Clock off
-	 *   - [1]     = PLL_OFF   : 1=Disable Power to PLL
-	 *   - [0]     = DF        : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
-	 *   all other bits set to zero
-	 */
-
-	p0.h = hi(PLL_LOCKCNT);
-	p0.l = lo(PLL_LOCKCNT);
-	r0 = 0x300(Z);
-	w[p0] = r0.l;
-	ssync;
-
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITSET (R0, 24);
-	[P2] = R0;
-	SSYNC;
-
-	r0 = CONFIG_VCO_MULT & 63;       /* Load the VCO multiplier         */
-	r0 = r0 << 9;                    /* Shift it over,                  */
-	r1 = CLKIN_HALF;                 /* Do we need to divide CLKIN by 2?*/
-	r0 = r1 | r0;
-	r1 = PLL_BYPASS;                 /* Bypass the PLL?                 */
-	r1 = r1 << 8;                    /* Shift it over                   */
-	r0 = r1 | r0;                    /* add them all together           */
-#ifdef ANOMALY_05000265
-	BITSET(r0, 15);                  /* Add 250 mV of hysteresis to SPORT input pins */
-#endif
-
-	p0.h = hi(PLL_CTL);
-	p0.l = lo(PLL_CTL);              /* Load the address                */
-	cli r2;                          /* Disable interrupts              */
-	ssync;
-	w[p0] = r0.l;                    /* Set the value                   */
-	idle;                            /* Wait for the PLL to stablize    */
-	sti r2;                          /* Enable interrupts               */
-
-.Lcheck_again:
-	p0.h = hi(PLL_STAT);
-	p0.l = lo(PLL_STAT);
-	R0 = W[P0](Z);
-	CC = BITTST(R0,5);
-	if ! CC jump .Lcheck_again;
-
-	/* Configure SCLK & CCLK Dividers */
-	r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
-	p0.h = hi(PLL_DIV);
-	p0.l = lo(PLL_DIV);
-	w[p0] = r0.l;
-	ssync;
-
-	p0.l = lo(EBIU_SDRRC);
-	p0.h = hi(EBIU_SDRRC);
-	r0 = mem_SDRRC;
-	w[p0] = r0.l;
-	ssync;
-
-	P2.H = hi(EBIU_SDGCTL);
-	P2.L = lo(EBIU_SDGCTL);
-	R0 = [P2];
-	BITCLR (R0, 24);
-	p0.h = hi(EBIU_SDSTAT);
-	p0.l = lo(EBIU_SDSTAT);
-	r2.l = w[p0];
-	cc = bittst(r2,3);
-	if !cc jump .Lskip;
-	NOP;
-	BITSET (R0, 23);
-.Lskip:
-	[P2] = R0;
-	SSYNC;
-
-	R0.L = lo(mem_SDGCTL);
-	R0.H = hi(mem_SDGCTL);
-	R1 = [p2];
-	R1 = R1 | R0;
-	[P2] = R1;
-	SSYNC;
-
-	RTS;
-ENDPROC(_start_dma_code)
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index c68992494f9..9cb39121d1c 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -7,7 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision C, 02/08/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
+ *  - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -148,6 +148,14 @@
 #define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
 /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
 #define ANOMALY_05000403 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
+#define ANOMALY_05000425 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -161,5 +169,8 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000386 (1)
+#define ANOMALY_05000412 (0)
+#define ANOMALY_05000432 (0)
+#define ANOMALY_05000435 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
index 24d5c9d4232..f194a848ae8 100644
--- a/arch/blackfin/mach-bf537/include/mach/bf537.h
+++ b/arch/blackfin/mach-bf537/include/mach/bf537.h
@@ -133,7 +133,7 @@
 #endif
 
 #ifndef CPU
-#error Unknown CPU type - This kernel doesn't seem to be configured properly
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
 #endif
 
 #endif				/* __MACH_BF537_H__  */
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
deleted file mode 100644
index cfd8ad4f1f2..00000000000
--- a/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Blackfin Infra-red Driver
- *
- * Copyright 2006-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- *
- */
-
-#include <linux/serial.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#define SIR_UART_GET_CHAR(port)   bfin_read16((port)->membase + OFFSET_RBR)
-#define SIR_UART_GET_DLL(port)    bfin_read16((port)->membase + OFFSET_DLL)
-#define SIR_UART_GET_IER(port)    bfin_read16((port)->membase + OFFSET_IER)
-#define SIR_UART_GET_DLH(port)    bfin_read16((port)->membase + OFFSET_DLH)
-#define SIR_UART_GET_IIR(port)    bfin_read16((port)->membase + OFFSET_IIR)
-#define SIR_UART_GET_LCR(port)    bfin_read16((port)->membase + OFFSET_LCR)
-#define SIR_UART_GET_GCTL(port)   bfin_read16((port)->membase + OFFSET_GCTL)
-
-#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
-#define SIR_UART_PUT_DLL(port, v)  bfin_write16(((port)->membase + OFFSET_DLL), v)
-#define SIR_UART_PUT_IER(port, v)  bfin_write16(((port)->membase + OFFSET_IER), v)
-#define SIR_UART_PUT_DLH(port, v)  bfin_write16(((port)->membase + OFFSET_DLH), v)
-#define SIR_UART_PUT_LCR(port, v)  bfin_write16(((port)->membase + OFFSET_LCR), v)
-#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
-
-#ifdef CONFIG_SIR_BFIN_DMA
-struct dma_rx_buf {
-	char *buf;
-	int head;
-	int tail;
-	};
-#endif /* CONFIG_SIR_BFIN_DMA */
-
-struct bfin_sir_port {
-	unsigned char __iomem   *membase;
-	unsigned int            irq;
-	unsigned int            lsr;
-	unsigned long           clk;
-	struct net_device       *dev;
-#ifdef CONFIG_SIR_BFIN_DMA
-	int                     tx_done;
-	struct dma_rx_buf       rx_dma_buf;
-	struct timer_list       rx_dma_timer;
-	int                     rx_dma_nrows;
-#endif /* CONFIG_SIR_BFIN_DMA */
-	unsigned int            tx_dma_channel;
-	unsigned int            rx_dma_channel;
-};
-
-struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
-
-struct bfin_sir_port_res {
-	unsigned long   base_addr;
-	int             irq;
-	unsigned int    rx_dma_channel;
-	unsigned int    tx_dma_channel;
-};
-
-struct bfin_sir_port_res bfin_sir_port_resource[] = {
-#ifdef CONFIG_BFIN_SIR0
-	{
-	0xFFC00400,
-	IRQ_UART0_RX,
-	CH_UART0_RX,
-	CH_UART0_TX,
-	},
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	{
-	0xFFC02000,
-	IRQ_UART1_RX,
-	CH_UART1_RX,
-	CH_UART1_TX,
-	},
-#endif
-};
-
-int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
-
-struct bfin_sir_self {
-	struct bfin_sir_port    *sir_port;
-	spinlock_t              lock;
-	unsigned int            open;
-	int                     speed;
-	int                     newspeed;
-
-	struct sk_buff          *txskb;
-	struct sk_buff          *rxskb;
-	struct net_device_stats stats;
-	struct device           *dev;
-	struct irlap_cb         *irlap;
-	struct qos_info         qos;
-
-	iobuff_t                tx_buff;
-	iobuff_t                rx_buff;
-
-	struct work_struct      work;
-	int                     mtt;
-};
-
-static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
-{
-	unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
-	port->lsr |= (lsr & (BI|FE|PE|OE));
-	return lsr | port->lsr;
-}
-
-static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
-{
-	port->lsr = 0;
-	bfin_read16(port->membase + OFFSET_LSR);
-}
-
-#define DRIVER_NAME "bfin_sir"
-
-static int bfin_sir_hw_init(void)
-{
-	int ret = -ENODEV;
-#ifdef CONFIG_BFIN_SIR0
-	ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
-	if (ret)
-		return ret;
-	ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
-	if (ret)
-		return ret;
-#endif
-
-#ifdef CONFIG_BFIN_SIR1
-	ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
-	if (ret)
-		return ret;
-	ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
-	if (ret)
-		return ret;
-#endif
-	return ret;
-}
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index cffc786b2a2..7d6069c886f 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -82,7 +82,7 @@
 #define STATUS_P1	0x02
 #define STATUS_P0	0x01
 
-/* DMA Channnel */
+/* DMA Channel */
 #define bfin_read_CH_UART_RX() bfin_read_CH_UART0_RX()
 #define bfin_write_CH_UART_RX(val) bfin_write_CH_UART0_RX(val)
 #define CH_UART_RX CH_UART0_RX
diff --git a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
index 88d491cd9f3..5f8b5f845be 100644
--- a/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -40,55 +40,11 @@
 /* Include core specific register pointer definitions 								*/
 #include <asm/cdef_LPBlackfin.h>
 
-#include <asm/system.h>
-
 /* Clock and System Control	(0xFFC00000 - 0xFFC000FF)								*/
 #define bfin_read_PLL_CTL()                  bfin_read16(PLL_CTL)
-/* Writing to PLL_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_PLL_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_PLL_CTL())
-		return;
-
-	local_irq_save(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(PLL_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	local_irq_restore(flags);
-}
 #define bfin_read_PLL_DIV()                  bfin_read16(PLL_DIV)
 #define bfin_write_PLL_DIV(val)              bfin_write16(PLL_DIV,val)
 #define bfin_read_VR_CTL()                   bfin_read16(VR_CTL)
-/* Writing to VR_CTL initiates a PLL relock sequence. */
-static __inline__ void bfin_write_VR_CTL(unsigned int val)
-{
-	unsigned long flags, iwr;
-
-	if (val == bfin_read_VR_CTL())
-		return;
-
-	local_irq_save(flags);
-	/* Enable the PLL Wakeup bit in SIC IWR */
-	iwr = bfin_read32(SIC_IWR);
-	/* Only allow PPL Wakeup) */
-	bfin_write32(SIC_IWR, IWR_ENABLE(0));
-
-	bfin_write16(VR_CTL, val);
-	SSYNC();
-	asm("IDLE;");
-
-	bfin_write32(SIC_IWR, iwr);
-	local_irq_restore(flags);
-}
 #define bfin_read_PLL_STAT()                 bfin_read16(PLL_STAT)
 #define bfin_write_PLL_STAT(val)             bfin_write16(PLL_STAT,val)
 #define bfin_read_PLL_LOCKCNT()              bfin_read16(PLL_LOCKCNT)
@@ -1816,4 +1772,51 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
 #define bfin_read_HMDMA1_BCOUNT()            bfin_read16(HMDMA1_BCOUNT)
 #define bfin_write_HMDMA1_BCOUNT(val)        bfin_write16(HMDMA1_BCOUNT,val)
 
+/* These need to be last due to the cdef/linux inter-dependencies */
+#include <asm/irq.h>
+
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_PLL_CTL())
+		return;
+
+	local_irq_save_hw(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(PLL_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	local_irq_restore_hw(flags);
+}
+
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+	unsigned long flags, iwr;
+
+	if (val == bfin_read_VR_CTL())
+		return;
+
+	local_irq_save_hw(flags);
+	/* Enable the PLL Wakeup bit in SIC IWR */
+	iwr = bfin_read32(SIC_IWR);
+	/* Only allow PPL Wakeup) */
+	bfin_write32(SIC_IWR, IWR_ENABLE(0));
+
+	bfin_write16(VR_CTL, val);
+	SSYNC();
+	asm("IDLE;");
+
+	bfin_write32(SIC_IWR, iwr);
+	local_irq_restore_hw(flags);
+}
+
 #endif				/* _CDEF_BF534_H */
diff --git a/arch/blackfin/mach-bf537/include/mach/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h
index 7a964040870..5ae83b1183a 100644
--- a/arch/blackfin/mach-bf537/include/mach/dma.h
+++ b/arch/blackfin/mach-bf537/include/mach/dma.h
@@ -1,38 +1,14 @@
-/*
- * file:         include/asm-blackfin/mach-bf537/dma.h
- * based on:
- * author:
+/* mach/dma.h - arch-specific DMA defines
  *
- * created:
- * description:
- *	system mmr register map
- * rev:
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * modified:
- *
- *
- * bugs:         enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose.  see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _MACH_DMA_H_
 #define _MACH_DMA_H_
 
-#define MAX_BLACKFIN_DMA_CHANNEL 16
+#define MAX_DMA_CHANNELS 16
 
 #define CH_PPI 			    0
 #define CH_EMAC_RX 		    1
diff --git a/arch/blackfin/mach-bf537/include/mach/gpio.h b/arch/blackfin/mach-bf537/include/mach/gpio.h
new file mode 100644
index 00000000000..d77a31e45a3
--- /dev/null
+++ b/arch/blackfin/mach-bf537/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * File: arch/blackfin/mach-bf537/include/mach/gpio.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+
+#ifndef _MACH_GPIO_H_
+#define _MACH_GPIO_H_
+
+#define MAX_BLACKFIN_GPIOS 48
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+#define	GPIO_PG0	16
+#define	GPIO_PG1	17
+#define	GPIO_PG2	18
+#define	GPIO_PG3	19
+#define	GPIO_PG4	20
+#define	GPIO_PG5	21
+#define	GPIO_PG6	22
+#define	GPIO_PG7	23
+#define	GPIO_PG8	24
+#define	GPIO_PG9	25
+#define	GPIO_PG10      	26
+#define	GPIO_PG11      	27
+#define	GPIO_PG12      	28
+#define	GPIO_PG13      	29
+#define	GPIO_PG14      	30
+#define	GPIO_PG15      	31
+#define	GPIO_PH0	32
+#define	GPIO_PH1	33
+#define	GPIO_PH2	34
+#define	GPIO_PH3	35
+#define	GPIO_PH4	36
+#define	GPIO_PH5	37
+#define	GPIO_PH6	38
+#define	GPIO_PH7	39
+#define	GPIO_PH8	40
+#define	GPIO_PH9	41
+#define	GPIO_PH10      	42
+#define	GPIO_PH11      	43
+#define	GPIO_PH12      	44
+#define	GPIO_PH13      	45
+#define	GPIO_PH14      	46
+#define	GPIO_PH15      	47
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif /* _MACH_GPIO_H_ */
diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
index 2e68a8a1e73..b2a71d5d4e5 100644
--- a/arch/blackfin/mach-bf537/include/mach/irq.h
+++ b/arch/blackfin/mach-bf537/include/mach/irq.h
@@ -82,14 +82,14 @@
 #define IRQ_CAN_TX          23	/*CAN Transmit Interrupt */
 #define IRQ_MAC_RX          24	/*DMA1 (Ethernet RX) Interrupt */
 #define IRQ_MAC_TX          25	/*DMA2 (Ethernet TX) Interrupt */
-#define IRQ_TMR0            26	/*Timer 0 */
-#define IRQ_TMR1            27	/*Timer 1 */
-#define IRQ_TMR2            28	/*Timer 2 */
-#define IRQ_TMR3            29	/*Timer 3 */
-#define IRQ_TMR4            30	/*Timer 4 */
-#define IRQ_TMR5            31	/*Timer 5 */
-#define IRQ_TMR6            32	/*Timer 6 */
-#define IRQ_TMR7            33	/*Timer 7 */
+#define IRQ_TIMER0            26	/*Timer 0 */
+#define IRQ_TIMER1            27	/*Timer 1 */
+#define IRQ_TIMER2            28	/*Timer 2 */
+#define IRQ_TIMER3            29	/*Timer 3 */
+#define IRQ_TIMER4            30	/*Timer 4 */
+#define IRQ_TIMER5            31	/*Timer 5 */
+#define IRQ_TIMER6            32	/*Timer 6 */
+#define IRQ_TIMER7            33	/*Timer 7 */
 #define IRQ_PROG_INTA       34	/* PF Ports F&G (PF15:0) Interrupt A */
 #define IRQ_PORTG_INTB      35	/* PF Port G (PF15:0) Interrupt B */
 #define IRQ_MEM_DMA0        36	/*(Memory DMA Stream 0) */
@@ -195,16 +195,16 @@
 #define IRQ_CAN_TX_POS      0
 #define IRQ_MAC_RX_POS      4
 #define IRQ_MAC_TX_POS      8
-#define IRQ_TMR0_POS        12
-#define IRQ_TMR1_POS        16
-#define IRQ_TMR2_POS        20
-#define IRQ_TMR3_POS        24
-#define IRQ_TMR4_POS        28
+#define IRQ_TIMER0_POS        12
+#define IRQ_TIMER1_POS        16
+#define IRQ_TIMER2_POS        20
+#define IRQ_TIMER3_POS        24
+#define IRQ_TIMER4_POS        28
 
 /* IAR3 BIT FIELDS*/
-#define IRQ_TMR5_POS        0
-#define IRQ_TMR6_POS        4
-#define IRQ_TMR7_POS        8
+#define IRQ_TIMER5_POS        0
+#define IRQ_TIMER6_POS        4
+#define IRQ_TIMER7_POS        8
 #define IRQ_PROG_INTA_POS   12
 #define IRQ_PORTG_INTB_POS   16
 #define IRQ_MEM_DMA0_POS    20
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h
deleted file mode 100644
index f67698f670c..00000000000
--- a/arch/blackfin/mach-bf537/include/mach/mem_init.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * File:         include/asm-blackfin/mach-bf537/mem_init.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75)
-#if (CONFIG_SCLK_HZ > 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_7
-#define SDRAM_tRAS_num  7
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_6
-#define SDRAM_tRAS_num  6
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_5
-#define SDRAM_tRAS_num  5
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  4
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
-#define SDRAM_tRP       TRP_2
-#define SDRAM_tRP_num   2
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_2
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_4
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_3
-#define SDRAM_tRAS_num  3
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_2
-#define SDRAM_tRAS_num  2
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#if (CONFIG_SCLK_HZ <= 29850746)
-#define SDRAM_tRP       TRP_1
-#define SDRAM_tRP_num   1
-#define SDRAM_tRAS      TRAS_1
-#define SDRAM_tRAS_num  1
-#define SDRAM_tRCD      TRCD_1
-#define SDRAM_tWR       TWR_2
-#endif
-#endif
-
-#if (CONFIG_MEM_MT48LC16M16A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC16M8A2TG_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   4096	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC32M8A2_75)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
-  /*SDRAM INFORMATION: */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-#if (CONFIG_MEM_GENERIC_BOARD)
-  /*SDRAM INFORMATION: Modify this for your board */
-#define SDRAM_Tref  64		/* Refresh period in milliseconds   */
-#define SDRAM_NRA   8192	/* Number of row addresses in SDRAM */
-#define SDRAM_CL    CL_3
-#endif
-
-/* Equation from section 17 (p17-46) of BF533 HRM */
-#define mem_SDRRC       (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
-
-/* Enable SCLK Out */
-#define mem_SDGCTL        (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
-
-#if defined CONFIG_CLKIN_HALF
-#define CLKIN_HALF       1
-#else
-#define CLKIN_HALF       0
-#endif
-
-#if defined CONFIG_PLL_BYPASS
-#define PLL_BYPASS      1
-#else
-#define PLL_BYPASS       0
-#endif
-
-/***************************************Currently Not Being Used *********************************/
-#define flash_EBIU_AMBCTL_WAT  ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_RAT  ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_HT   ((CONFIG_FLASH_SPEED_BHT  * 4) / (4000000000 / CONFIG_SCLK_HZ))
-#define flash_EBIU_AMBCTL_ST   ((CONFIG_FLASH_SPEED_BST  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-#define flash_EBIU_AMBCTL_TT   ((CONFIG_FLASH_SPEED_BTT  * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
-
-#if (flash_EBIU_AMBCTL_TT > 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_4
-#endif
-#if (flash_EBIU_AMBCTL_TT == 3)
-#define flash_EBIU_AMBCTL0_TT   B0TT_3
-#endif
-#if (flash_EBIU_AMBCTL_TT == 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_2
-#endif
-#if (flash_EBIU_AMBCTL_TT < 2)
-#define flash_EBIU_AMBCTL0_TT   B0TT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_ST > 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_4
-#endif
-#if (flash_EBIU_AMBCTL_ST == 3)
-#define flash_EBIU_AMBCTL0_ST   B0ST_3
-#endif
-#if (flash_EBIU_AMBCTL_ST == 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_2
-#endif
-#if (flash_EBIU_AMBCTL_ST < 2)
-#define flash_EBIU_AMBCTL0_ST   B0ST_1
-#endif
-
-#if (flash_EBIU_AMBCTL_HT > 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_3
-#endif
-#if (flash_EBIU_AMBCTL_HT == 2)
-#define flash_EBIU_AMBCTL0_HT   B0HT_2
-#endif
-#if (flash_EBIU_AMBCTL_HT == 1)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_0
-#endif
-#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
-#define flash_EBIU_AMBCTL0_HT   B0HT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_WAT > 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_15
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 14)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_14
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 13)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_13
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 12)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_12
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 11)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_11
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 10)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_10
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 9)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_9
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 8)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_8
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 7)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_7
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 6)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_6
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 5)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_5
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 4)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_4
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 3)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_3
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 2)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_2
-#endif
-#if (flash_EBIU_AMBCTL_WAT == 1)
-#define flash_EBIU_AMBCTL0_WAT  B0WAT_1
-#endif
-
-#if (flash_EBIU_AMBCTL_RAT > 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_15
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 14)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_14
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 13)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_13
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 12)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_12
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 11)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_11
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 10)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_10
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 9)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_9
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 8)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_8
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 7)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_7
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 6)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_6
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 5)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_5
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 4)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_4
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 3)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_3
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 2)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_2
-#endif
-#if (flash_EBIU_AMBCTL_RAT == 1)
-#define flash_EBIU_AMBCTL0_RAT  B0RAT_1
-#endif
-
-#define flash_EBIU_AMBCTL0  \
-	(flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
-	 flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
index 5078b669431..f9010c4b4bf 100644
--- a/arch/blackfin/mach-bf537/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -176,4 +176,10 @@
 #define L1_SCRATCH_START	0xFFB00000
 #define L1_SCRATCH_LENGTH	0x1000
 
+#define GET_PDA_SAFE(preg)		\
+	preg.l = _cpu_pda;		\
+	preg.h = _cpu_pda;
+
+#define GET_PDA(preg, dreg)	GET_PDA_SAFE(preg)
+
 #endif				/* _MEM_MAP_537_H_ */
diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c
index b1300b3f181..51c48087e03 100644
--- a/arch/blackfin/mach-bf537/ints-priority.c
+++ b/arch/blackfin/mach-bf537/ints-priority.c
@@ -55,15 +55,15 @@ void __init program_IAR(void)
 	bfin_write_SIC_IAR2(((CONFIG_IRQ_CAN_TX - 7) << IRQ_CAN_TX_POS) |
 			    ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
 			    ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
-			    ((CONFIG_IRQ_TMR0 - 7) << IRQ_TMR0_POS) |
-			    ((CONFIG_IRQ_TMR1 - 7) << IRQ_TMR1_POS) |
-			    ((CONFIG_IRQ_TMR2 - 7) << IRQ_TMR2_POS) |
-			    ((CONFIG_IRQ_TMR3 - 7) << IRQ_TMR3_POS) |
-			    ((CONFIG_IRQ_TMR4 - 7) << IRQ_TMR4_POS));
+			    ((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+			    ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS) |
+			    ((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+			    ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+			    ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS));
 
-	bfin_write_SIC_IAR3(((CONFIG_IRQ_TMR5 - 7) << IRQ_TMR5_POS) |
-			    ((CONFIG_IRQ_TMR6 - 7) << IRQ_TMR6_POS) |
-			    ((CONFIG_IRQ_TMR7 - 7) << IRQ_TMR7_POS) |
+	bfin_write_SIC_IAR3(((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+			    ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+			    ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
 			    ((CONFIG_IRQ_PROG_INTA - 7) << IRQ_PROG_INTA_POS) |
 			    ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
 			    ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |