/spare/repo/netdev-2.6 branch 'master'

25 files changed, 628 insertions, 471 deletions

diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 848f60e5429..089c560e07f 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -63,8 +63,8 @@ __beginning:	mov	r4, r0				@ save the entry to the firmware
 
 		mov	pc, r2
 
-__copy_target:	.long	0x08508000
-__copy_end:	.long	0x08608000
+__copy_target:	.long	0x08507FFC
+__copy_end:	.long	0x08607FFC
 		
 		.word	_start
 		.word	__bss_start
@@ -73,9 +73,10 @@ __copy_end:	.long	0x08608000
 __temp_stack:	.space 128
 
 __mmu_off:
-		adr	r0, __ofw_data
+		adr	r0, __ofw_data			@ read the 1. entry of the memory map
 		ldr	r0, [r0, #4]
 		orr	r0, r0, #0x00600000
+		sub	r0, r0, #4
 	
 		ldr	r1, __copy_end
 		ldr	r3, __copy_target
@@ -89,20 +90,43 @@ __mmu_off:
  * from 0x08500000 to 0x08508000 if we have only 8MB
  */
 
+/* As we get more 2.6-kernels it gets more and more
+ * uncomfortable to be bound to kernel images of 1MB only.
+ * So we add a loop here, to be able to copy some more.
+ * Alexander Schulz 2005-07-17
+ */
+
+		mov	r4, #3				@ How many megabytes to copy
+
+
+__MoveCode:	sub	r4, r4, #1
 	
 __Copy:		ldr	r2, [r0], #-4
 		str	r2, [r1], #-4
 		teq	r1, r3
 		bne	__Copy
+
+		/* The firmware maps us in blocks of 1 MB, the next block is
+		   _below_ the last one. So our decrementing source pointer
+		   ist right here, but the destination pointer must be increased
+		   by 2 MB */
+		add	r1, r1, #0x00200000
+		add	r3, r3, #0x00100000
+
+		teq	r4, #0
+		bne	__MoveCode
+
+
 		/* and jump to it */
-		adr	r2, __go_on
-		adr	r0, __ofw_data
+		adr	r2, __go_on			@ where we want to jump
+		adr	r0, __ofw_data			@ read the 1. entry of the memory map
 		ldr	r0, [r0, #4]
-		sub	r2, r2, r0
-		sub	r2, r2, #0x00500000
-		ldr	r0, __copy_target
+		sub	r2, r2, r0			@ we are mapped add 0e50 now, sub that (-0e00)
+		sub	r2, r2, #0x00500000		@ -0050
+		ldr	r0, __copy_target		@ and add 0850 8000 instead
+		add	r0, r0, #4
 		add	r2, r2, r0
-		mov	pc, r2
+		mov	pc, r2				@ and jump there
 
 __go_on:
 		adr	sp, __temp_stack
diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/bast_defconfig
index 2d985e9611c..35e3a99bcbb 100644
--- a/arch/arm/configs/bast_defconfig
+++ b/arch/arm/configs/bast_defconfig
@@ -561,7 +561,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 98b72ff3883..96a794d8de8 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -570,7 +570,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 #
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_BAST_SIO=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 1d9bcbbc8df..271823f0d70 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -1,22 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 23:59:14 2005
+# Linux kernel version: 2.6.12-git3
+# Sat Jul 16 15:21:47 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
+CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,7 +32,10 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -81,6 +83,7 @@ CONFIG_ARCH_SHARK=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # Processor Type
@@ -103,10 +106,12 @@ CONFIG_CPU_TLB_V4WB=y
 #
 CONFIG_ISA=y
 CONFIG_ISA_DMA=y
+CONFIG_ISA_DMA_API=y
 CONFIG_PCI=y
 CONFIG_PCI_HOST_VIA82C505=y
 CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -116,7 +121,9 @@ CONFIG_PCI_LEGACY_PROC=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -163,6 +170,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -172,8 +180,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Parallel port support
 #
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
@@ -189,7 +197,6 @@ CONFIG_PARPORT_PC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
@@ -229,7 +236,7 @@ CONFIG_BLK_DEV_IDE=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD=m
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -261,6 +268,7 @@ CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -290,17 +298,14 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
@@ -314,11 +319,8 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=m
@@ -327,6 +329,7 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -344,6 +347,8 @@ CONFIG_SCSI_QLA2XXX=m
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -365,7 +370,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -380,7 +384,7 @@ CONFIG_INET=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
+CONFIG_IP_TCPDIAG=y
 # CONFIG_IP_TCPDIAG_IPV6 is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
@@ -439,6 +443,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 
 #
@@ -483,9 +488,11 @@ CONFIG_CS89x0=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -569,7 +576,6 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -592,6 +598,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -653,6 +660,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -674,7 +682,7 @@ CONFIG_FB_CYBER2000=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -808,7 +816,7 @@ CONFIG_DNOTIFY=y
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
+CONFIG_ISO9660_FS=m
 CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
@@ -816,9 +824,9 @@ CONFIG_JOLIET=y
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
@@ -833,7 +841,6 @@ CONFIG_DEVFS_MOUNT=y
 # CONFIG_DEVFS_DEBUG is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
@@ -857,13 +864,14 @@ CONFIG_RAMFS=y
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=m
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -895,12 +903,12 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Native Language Support
 #
-CONFIG_NLS=y
+CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_850=m
 # CONFIG_NLS_CODEPAGE_852 is not set
 # CONFIG_NLS_CODEPAGE_855 is not set
 # CONFIG_NLS_CODEPAGE_857 is not set
@@ -921,7 +929,7 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -945,11 +953,22 @@ CONFIG_NLS_ISO8859_1=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index bbea636ff68..409db6d5ec9 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -131,7 +131,6 @@ void machine_halt(void)
 {
 }
 
-EXPORT_SYMBOL(machine_halt);
 
 void machine_power_off(void)
 {
@@ -139,7 +138,6 @@ void machine_power_off(void)
 		pm_power_off();
 }
 
-EXPORT_SYMBOL(machine_power_off);
 
 void machine_restart(char * __unused)
 {
@@ -169,8 +167,6 @@ void machine_restart(char * __unused)
 	while (1);
 }
 
-EXPORT_SYMBOL(machine_restart);
-
 void __show_regs(struct pt_regs *regs)
 {
 	unsigned long flags = condition_codes(regs);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index a931409c8fe..b2085735a2b 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -36,7 +36,7 @@
  * The present bitmask indicates that the CPU is physically present.
  * The online bitmask indicates that the CPU is up and running.
  */
-cpumask_t cpu_present_mask;
+cpumask_t cpu_possible_map;
 cpumask_t cpu_online_map;
 
 /*
@@ -78,7 +78,7 @@ struct smp_call_struct {
 static struct smp_call_struct * volatile smp_call_function_data;
 static DEFINE_SPINLOCK(smp_call_function_lock);
 
-int __init __cpu_up(unsigned int cpu)
+int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle;
 	pgd_t *pgd;
@@ -159,7 +159,7 @@ int __init __cpu_up(unsigned int cpu)
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
-asmlinkage void __init secondary_start_kernel(void)
+asmlinkage void __cpuinit secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
@@ -176,6 +176,7 @@ asmlinkage void __init secondary_start_kernel(void)
 	cpu_set(cpu, mm->cpu_vm_mask);
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	cpu_init();
 
@@ -209,7 +210,7 @@ asmlinkage void __init secondary_start_kernel(void)
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
-void __init smp_store_cpu_info(unsigned int cpuid)
+void __cpuinit smp_store_cpu_info(unsigned int cpuid)
 {
 	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
 
@@ -235,7 +236,8 @@ void __init smp_prepare_boot_cpu(void)
 {
 	unsigned int cpu = smp_processor_id();
 
-	cpu_set(cpu, cpu_present_mask);
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
 	cpu_set(cpu, cpu_online_map);
 }
 
@@ -355,7 +357,7 @@ void show_ipi_list(struct seq_file *p)
 
 	seq_puts(p, "IPI:");
 
-	for_each_online_cpu(cpu)
+	for_each_present_cpu(cpu)
 		seq_printf(p, " %10lu", per_cpu(ipi_data, cpu).ipi_count);
 
 	seq_putc(p, '\n');
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index df2cb06ce42..d571c37ac30 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -248,16 +248,20 @@ static DEFINE_SPINLOCK(undef_lock);
 
 void register_undef_hook(struct undef_hook *hook)
 {
-	spin_lock_irq(&undef_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&undef_lock, flags);
 	list_add(&hook->node, &undef_hook);
-	spin_unlock_irq(&undef_lock);
+	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
 void unregister_undef_hook(struct undef_hook *hook)
 {
-	spin_lock_irq(&undef_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&undef_lock, flags);
 	list_del(&hook->node);
-	spin_unlock_irq(&undef_lock);
+	spin_unlock_irqrestore(&undef_lock, flags);
 }
 
 asmlinkage void do_undefinstr(struct pt_regs *regs)
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index 4a83ab6cd56..2036ff15bda 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -1,3 +1,33 @@
+#if __LINUX_ARM_ARCH__ >= 6
+	.macro	bitop, instr
+	mov	r2, #1
+	and	r3, r0, #7		@ Get bit offset
+	add	r1, r1, r0, lsr #3	@ Get byte offset
+	mov	r3, r2, lsl r3
+1:	ldrexb	r2, [r1]
+	\instr	r2, r2, r3
+	strexb	r0, r2, [r1]
+	cmp	r0, #0
+	bne	1b
+	mov	pc, lr
+	.endm
+
+	.macro	testop, instr, store
+	and	r3, r0, #7		@ Get bit offset
+	mov	r2, #1
+	add	r1, r1, r0, lsr #3	@ Get byte offset
+	mov	r3, r2, lsl r3		@ create mask
+1:	ldrexb	r2, [r1]
+	ands	r0, r2, r3		@ save old value of bit
+	\instr	r2, r2, r3			@ toggle bit
+	strexb	ip, r2, [r1]
+	cmp	ip, #0
+	bne	1b
+	cmp	r0, #0
+	movne	r0, #1
+2:	mov	pc, lr
+	.endm
+#else
 	.macro	bitop, instr
 	and	r2, r0, #7
 	mov	r3, #1
@@ -31,3 +61,4 @@
 	moveq	r0, #0
 	mov	pc, lr
 	.endm
+#endif
diff --git a/arch/arm/lib/io-shark.c b/arch/arm/lib/io-shark.c
index 108d4573e97..824253948f5 100644
--- a/arch/arm/lib/io-shark.c
+++ b/arch/arm/lib/io-shark.c
@@ -11,73 +11,3 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/kernel.h>
-
-#include <asm/io.h>
-
-void print_warning(void)
-{
-	printk(KERN_WARNING "ins?/outs? not implemented on this architecture\n");
-}
-
-void insl(unsigned int port, void *to, int len)
-{
-	print_warning();
-}
-
-void insb(unsigned int port, void *to, int len)
-{
-	print_warning();
-}
-
-void outsl(unsigned int port, const void *from, int len)
-{
-	print_warning();
-}
-
-void outsb(unsigned int port, const void *from, int len)
-{
-	print_warning();
-}
-
-/* these should be in assembler again */
-
-/*
- * Purpose: read a block of data from a hardware register to memory.
- * Proto  : insw(int from_port, void *to, int len_in_words);
- * Proto  : inswb(int from_port, void *to, int len_in_bytes);
- * Notes  : increment to
- */
-
-void insw(unsigned int port, void *to, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		((unsigned short *) to)[i] = inw(port);
-}
-
-void inswb(unsigned int port, void *to, int len)
-{
-	insw(port, to, len >> 2);
-}
-
-/*
- * Purpose: write a block of data from memory to a hardware register.
- * Proto  : outsw(int to_reg, void *from, int len_in_words);
- * Proto  : outswb(int to_reg, void *from, int len_in_bytes);
- * Notes  : increments from
- */
-
-void outsw(unsigned int port, const void *from, int len)
-{
-	int i;
-
-	for (i = 0; i < len; i++)
-		outw(((unsigned short *) from)[i], port);
-}
-
-void outswb(unsigned int port, const void *from, int len)
-{
-	outsw(port, from, len >> 2);
-}
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
index ead15dfcb53..ea10bd8c972 100644
--- a/arch/arm/mach-integrator/platsmp.c
+++ b/arch/arm/mach-integrator/platsmp.c
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
 #include <asm/procinfo.h>
@@ -27,12 +28,12 @@ extern void integrator_secondary_startup(void);
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
-volatile int __initdata pen_release = -1;
-unsigned long __initdata phys_pen_release = 0;
+volatile int __cpuinitdata pen_release = -1;
+unsigned long __cpuinitdata phys_pen_release = 0;
 
 static DEFINE_SPINLOCK(boot_lock);
 
-void __init platform_secondary_init(unsigned int cpu)
+void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
 	 * the primary core may have used a "cross call" soft interrupt
@@ -61,7 +62,7 @@ void __init platform_secondary_init(unsigned int cpu)
 	spin_unlock(&boot_lock);
 }
 
-int __init boot_secondary(unsigned int cpu, struct task_struct *idle)
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long timeout;
 
@@ -80,6 +81,7 @@ int __init boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * "cpu" is Linux's internal ID.
 	 */
 	pen_release = cpu;
+	flush_cache_all();
 
 	/*
 	 * XXX
@@ -174,11 +176,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		max_cpus = ncores;
 
 	/*
-	 * Initialise the present mask - this tells us which CPUs should
-	 * be present.
+	 * Initialise the possible/present maps.
+	 * cpu_possible_map describes the set of CPUs which may be present
+	 * cpu_present_map describes the set of CPUs populated
 	 */
 	for (i = 0; i < max_cpus; i++) {
-		cpu_set(i, cpu_present_mask);
+		cpu_set(i, cpu_possible_map);
+		cpu_set(i, cpu_present_map);
 	}
 
 	/*
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 6e98290cca5..ec0d8285f24 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
-#include <linux/version.h>
 
 #include <asm/io.h>
 #include <asm/hardware.h>
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index f99b689e439..55ed7c7e57d 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -23,6 +23,8 @@ obj-$(CONFIG_PM_SIMTEC)	   += pm-simtec.o
 # S3C2440 support
 
 obj-$(CONFIG_CPU_S3C2440)  += s3c2440.o s3c2440-dsc.o
+obj-$(CONFIG_CPU_S3C2440)  += s3c2440-irq.o
+obj-$(CONFIG_CPU_S3C2440)  += s3c2440-clock.o
 
 # machine specific support
 
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 8d986b8401c..9a66050e887 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -448,60 +448,3 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
 
 	return 0;
 }
-
-/* S3C2440 extended clock support */
-
-#ifdef CONFIG_CPU_S3C2440
-
-static struct clk s3c2440_clk_upll = {
-	.name		= "upll",
-	.id		= -1,
-};
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.parent		= &clk_h,
-	.id		= -1,
-	.enable		= s3c24xx_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.parent		= &clk_p,
-	.id		= -1,
-	.enable		= s3c24xx_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static int s3c2440_clk_add(struct sys_device *sysdev)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-
-	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
-
-	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
-	       print_mhz(s3c2440_clk_upll.rate));
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_upll);
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_clk_driver = {
-	.add	= s3c2440_clk_add,
-};
-
-static int s3c24xx_clk_driver(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
-}
-
-arch_initcall(s3c24xx_clk_driver);
-
-#endif /* CONFIG_CPU_S3C2440 */
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index c7c28890d40..65feaf20d23 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -436,7 +436,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 
 	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
 	if (buf == NULL) {
-		pr_debug("%s: out of memory (%d alloc)\n",
+		pr_debug("%s: out of memory (%ld alloc)\n",
 			 __FUNCTION__, sizeof(*buf));
 		return -ENOMEM;
 	}
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index cf9f46d8806..973a5fe6769 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -45,6 +45,9 @@
  *
  *   28-Jun-2005  Ben Dooks
  *		  Mark IRQ_LCD valid
+ *
+ *   25-Jul-2005  Ben Dooks
+ *		  Split the S3C2440 IRQ code to seperate file
 */
 
 #include <linux/init.h>
@@ -65,11 +68,7 @@
 
 #include "cpu.h"
 #include "pm.h"
-
-#define irqdbf(x...)
-#define irqdbf2(x...)
-
-#define EXTINT_OFF (IRQ_EINT4 - 4)
+#include "irq.h"
 
 /* wakeup irq control */
 
@@ -181,7 +180,7 @@ s3c_irq_unmask(unsigned int irqno)
 	__raw_writel(mask, S3C2410_INTMSK);
 }
 
-static struct irqchip s3c_irq_level_chip = {
+struct irqchip s3c_irq_level_chip = {
 	.ack	   = s3c_irq_maskack,
 	.mask	   = s3c_irq_mask,
 	.unmask	   = s3c_irq_unmask,
@@ -370,84 +369,6 @@ static struct irqchip s3c_irq_eint0t4 = {
 #define INTMSK_UART2	 (1UL << (IRQ_UART2 - IRQ_EINT0))
 #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
 
-static inline void
-s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
-		int subcheck)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
-
-	/* check to see if we need to mask the parent IRQ */
-
-	if ((submask  & subcheck) == subcheck) {
-		__raw_writel(mask | parentbit, S3C2410_INTMSK);
-	}
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-
-}
-
-static inline void
-s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
-{
-	unsigned long mask;
-	unsigned long submask;
-
-	submask = __raw_readl(S3C2410_INTSUBMSK);
-	mask = __raw_readl(S3C2410_INTMSK);
-
-	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
-	mask &= ~parentbit;
-
-	/* write back masks */
-	__raw_writel(submask, S3C2410_INTSUBMSK);
-	__raw_writel(mask, S3C2410_INTMSK);
-}
-
-
-static inline void
-s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	s3c_irqsub_mask(irqno, parentmask, group);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
-
-static inline void
-s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
-{
-	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
-
-	__raw_writel(bit, S3C2410_SUBSRCPND);
-
-	/* only ack parent if we've got all the irqs (seems we must
-	 * ack, all and hope that the irq system retriggers ok when
-	 * the interrupt goes off again)
-	 */
-
-	if (1) {
-		__raw_writel(parentmask, S3C2410_SRCPND);
-		__raw_writel(parentmask, S3C2410_INTPND);
-	}
-}
 
 /* UART0 */
 
@@ -794,174 +715,3 @@ void __init s3c24xx_init_irq(void)
 
 	irqdbf("s3c2410: registered interrupt handlers\n");
 }
-
-/* s3c2440 irq code
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
-				  struct irqdesc *desc,
-				  struct pt_regs *regs)
-{
-	unsigned int subsrc, submsk;
-	struct irqdesc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 13;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_WDT;
-			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_AC97;
-			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
-		}
-	}
-}
-
-
-#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
-}
-
-static struct irqchip s3c_irq_wdtac97 = {
-	.mask	    = s3c_irq_wdtac97_mask,
-	.unmask	    = s3c_irq_wdtac97_unmask,
-	.ack	    = s3c_irq_wdtac97_ack,
-};
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
-			      struct irqdesc *desc,
-			      struct pt_regs *regs)
-{
-	unsigned int subsrc, submsk;
-	struct irqdesc *mydesc;
-
-	/* read the current pending interrupts, and the mask
-	 * for what it is available */
-
-	subsrc = __raw_readl(S3C2410_SUBSRCPND);
-	submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-	subsrc &= ~submsk;
-	subsrc >>= 11;
-	subsrc &= 3;
-
-	if (subsrc != 0) {
-		if (subsrc & 1) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_C;
-			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
-		}
-		if (subsrc & 2) {
-			mydesc = irq_desc + IRQ_S3C2440_CAM_P;
-			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
-		}
-	}
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(unsigned int irqno)
-{
-	s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
-}
-
-static void
-s3c_irq_cam_unmask(unsigned int irqno)
-{
-	s3c_irqsub_unmask(irqno, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(unsigned int irqno)
-{
-	s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
-}
-
-static struct irqchip s3c_irq_cam = {
-	.mask	    = s3c_irq_cam_mask,
-	.unmask	    = s3c_irq_cam_unmask,
-	.ack	    = s3c_irq_cam_ack,
-};
-
-static int s3c2440_irq_add(struct sys_device *sysdev)
-{
-	unsigned int irqno;
-
-	printk("S3C2440: IRQ Support\n");
-
-	set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_NFCON, do_level_IRQ);
-	set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
-	/* add new chained handler for wdt, ac7 */
-
-	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_WDT, do_level_IRQ);
-	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
-	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
-		set_irq_chip(irqno, &s3c_irq_wdtac97);
-		set_irq_handler(irqno, do_level_IRQ);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	/* add chained handler for camera */
-
-	set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
-	set_irq_handler(IRQ_CAM, do_level_IRQ);
-	set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
-	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
-		set_irq_chip(irqno, &s3c_irq_cam);
-		set_irq_handler(irqno, do_level_IRQ);
-		set_irq_flags(irqno, IRQF_VALID);
-	}
-
-	return 0;
-}
-
-static struct sysdev_driver s3c2440_irq_driver = {
-	.add	= s3c2440_irq_add,
-};
-
-static int s3c24xx_irq_driver(void)
-{
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
-}
-
-arch_initcall(s3c24xx_irq_driver);
-
-#endif /* CONFIG_CPU_S3C2440 */
-
diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h
new file mode 100644
index 00000000000..4abf0ca14e0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/irq.h
@@ -0,0 +1,99 @@
+/* arch/arm/mach-s3c2410/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+*/
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+extern struct irqchip s3c_irq_level_chip;
+
+static inline void
+s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+		int subcheck)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+	/* check to see if we need to mask the parent IRQ */
+
+	if ((submask  & subcheck) == subcheck) {
+		__raw_writel(mask | parentbit, S3C2410_INTMSK);
+	}
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void
+s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+	mask &= ~parentbit;
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void
+s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	s3c_irqsub_mask(irqno, parentmask, group);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+static inline void
+s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ccb6bcefa46..1e7f343822d 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -25,9 +25,11 @@
  *     14-Jan-2005 BJD  Add support for muitlple NAND devices
  *     03-Mar-2005 BJD  Ensured that bast-cpld.h is included
  *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2006 BJD  Updated for __iomem changes
- *     22-Jun-2006 BJD  Added DM9000 platform information
- *     28-Jun-2006 BJD  Moved pm functionality out to common code
+ *     14-Mar-2005 BJD  Updated for __iomem changes
+ *     22-Jun-2005 BJD  Added DM9000 platform information
+ *     28-Jun-2005 BJD  Moved pm functionality out to common code
+ *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
+ *     25-Jul-2005 BJD  Removed ASIX static mappings
 */
 
 #include <linux/kernel.h>
@@ -64,6 +66,8 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <linux/serial_8250.h>
+
 #include "clock.h"
 #include "devs.h"
 #include "cpu.h"
@@ -113,7 +117,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* slow, byte */
   { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C2(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C2(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C2(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
@@ -123,7 +126,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* slow, word */
   { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C3(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C3(BAST_VA_IDEPRI),  PA_CS3(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C3(BAST_VA_IDESEC),  PA_CS3(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
@@ -133,7 +135,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* fast, byte */
   { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C4(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C4(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C4(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
@@ -143,7 +144,6 @@ static struct map_desc bast_iodesc[] __initdata = {
   /* fast, word */
   { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
   { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
-  { VA_C5(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET),  SZ_1M,  MT_DEVICE },
   { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
   { VA_C5(BAST_VA_IDEPRI),  PA_CS5(BAST_PA_IDEPRI),   SZ_1M,  MT_DEVICE },
   { VA_C5(BAST_VA_IDESEC),  PA_CS5(BAST_PA_IDESEC),   SZ_1M,  MT_DEVICE },
@@ -351,6 +351,39 @@ static struct platform_device bast_device_dm9k = {
 	}
 };
 
+/* serial devices */
+
+#define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
+#define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
+#define SERIAL_CLK   (1843200)
+
+static struct plat_serial8250_port bast_sio_data[] = {
+	[0] = {
+		.mapbase	= SERIAL_BASE + 0x2f8,
+		.irq		= IRQ_PCSERIAL1,
+		.flags		= SERIAL_FLAGS,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= SERIAL_CLK,
+	},
+	[1] = {
+		.mapbase	= SERIAL_BASE + 0x3f8,
+		.irq		= IRQ_PCSERIAL2,
+		.flags		= SERIAL_FLAGS,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= SERIAL_CLK,
+	},
+	{ }
+};
+
+static struct platform_device bast_sio = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= &bast_sio_data,
+	},
+};
 
 /* Standard BAST devices */
 
@@ -364,6 +397,7 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_nand,
 	&bast_device_nor,
 	&bast_device_dm9k,
+	&bast_sio,
 };
 
 static struct clk *bast_clocks[] = {
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
new file mode 100644
index 00000000000..b018a1f680c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -0,0 +1,116 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2440 Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/hardware/clock.h>
+#include <asm/arch/regs-clock.h>
+
+#include "clock.h"
+#include "cpu.h"
+
+/* S3C2440 extended clock support */
+
+static struct clk s3c2440_clk_upll = {
+	.name		= "upll",
+	.id		= -1,
+};
+
+static struct clk s3c2440_clk_cam = {
+	.name		= "camif",
+	.id		= -1,
+	.enable		= s3c24xx_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static struct clk s3c2440_clk_ac97 = {
+	.name		= "ac97",
+	.id		= -1,
+	.enable		= s3c24xx_clkcon_enable,
+	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+};
+
+static int s3c2440_clk_add(struct sys_device *sysdev)
+{
+	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
+	struct clk *clk_h;
+	struct clk *clk_p;
+	struct clk *clk_xtal;
+
+	clk_xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(clk_xtal)) {
+		printk(KERN_ERR "S3C2440: Failed to get clk_xtal\n");
+		return -EINVAL;
+	}
+
+	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
+
+	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
+	       print_mhz(s3c2440_clk_upll.rate));
+
+	clk_p = clk_get(NULL, "pclk");
+	clk_h = clk_get(NULL, "hclk");
+
+	if (IS_ERR(clk_p) || IS_ERR(clk_h)) {
+		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
+		return -EINVAL;
+	}
+
+	s3c2440_clk_cam.parent = clk_h;
+	s3c2440_clk_ac97.parent = clk_p;
+
+	s3c24xx_register_clock(&s3c2440_clk_ac97);
+	s3c24xx_register_clock(&s3c2440_clk_cam);
+	s3c24xx_register_clock(&s3c2440_clk_upll);
+
+	clk_disable(&s3c2440_clk_ac97);
+	clk_disable(&s3c2440_clk_cam);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_clk_driver = {
+	.add	= s3c2440_clk_add,
+};
+
+static __init int s3c24xx_clk_driver(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_clk_driver);
+}
+
+arch_initcall(s3c24xx_clk_driver);
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2410/s3c2440-irq.c
new file mode 100644
index 00000000000..7cb9912242a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2440-irq.c
@@ -0,0 +1,207 @@
+/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Changelog:
+ *	25-Jul-2005 BJD		Split from irq.c
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "pm.h"
+#include "irq.h"
+
+/* WDT/AC97 */
+
+static void s3c_irq_demux_wdtac97(unsigned int irq,
+				  struct irqdesc *desc,
+				  struct pt_regs *regs)
+{
+	unsigned int subsrc, submsk;
+	struct irqdesc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= 13;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_S3C2440_WDT;
+			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_S3C2440_AC97;
+			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+		}
+	}
+}
+
+
+#define INTMSK_WDT	 (1UL << (IRQ_WDT - IRQ_EINT0))
+
+static void
+s3c_irq_wdtac97_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_WDT, 3<<13);
+}
+
+static void
+s3c_irq_wdtac97_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_WDT);
+}
+
+static void
+s3c_irq_wdtac97_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_WDT, 3<<13);
+}
+
+static struct irqchip s3c_irq_wdtac97 = {
+	.mask	    = s3c_irq_wdtac97_mask,
+	.unmask	    = s3c_irq_wdtac97_unmask,
+	.ack	    = s3c_irq_wdtac97_ack,
+};
+
+/* camera irq */
+
+static void s3c_irq_demux_cam(unsigned int irq,
+			      struct irqdesc *desc,
+			      struct pt_regs *regs)
+{
+	unsigned int subsrc, submsk;
+	struct irqdesc *mydesc;
+
+	/* read the current pending interrupts, and the mask
+	 * for what it is available */
+
+	subsrc = __raw_readl(S3C2410_SUBSRCPND);
+	submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+	subsrc &= ~submsk;
+	subsrc >>= 11;
+	subsrc &= 3;
+
+	if (subsrc != 0) {
+		if (subsrc & 1) {
+			mydesc = irq_desc + IRQ_S3C2440_CAM_C;
+			mydesc->handle( IRQ_S3C2440_WDT, mydesc, regs);
+		}
+		if (subsrc & 2) {
+			mydesc = irq_desc + IRQ_S3C2440_CAM_P;
+			mydesc->handle(IRQ_S3C2440_AC97, mydesc, regs);
+		}
+	}
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+
+static void
+s3c_irq_cam_mask(unsigned int irqno)
+{
+	s3c_irqsub_mask(irqno, INTMSK_CAM, 3<<11);
+}
+
+static void
+s3c_irq_cam_unmask(unsigned int irqno)
+{
+	s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void
+s3c_irq_cam_ack(unsigned int irqno)
+{
+	s3c_irqsub_maskack(irqno, INTMSK_CAM, 3<<11);
+}
+
+static struct irqchip s3c_irq_cam = {
+	.mask	    = s3c_irq_cam_mask,
+	.unmask	    = s3c_irq_cam_unmask,
+	.ack	    = s3c_irq_cam_ack,
+};
+
+static int s3c2440_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	printk("S3C2440: IRQ Support\n");
+
+	set_irq_chip(IRQ_NFCON, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_NFCON, do_level_IRQ);
+	set_irq_flags(IRQ_NFCON, IRQF_VALID);
+
+	/* add new chained handler for wdt, ac7 */
+
+	set_irq_chip(IRQ_WDT, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_WDT, do_level_IRQ);
+	set_irq_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
+
+	for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
+		set_irq_chip(irqno, &s3c_irq_wdtac97);
+		set_irq_handler(irqno, do_level_IRQ);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	/* add chained handler for camera */
+
+	set_irq_chip(IRQ_CAM, &s3c_irq_level_chip);
+	set_irq_handler(IRQ_CAM, do_level_IRQ);
+	set_irq_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
+
+	for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
+		set_irq_chip(irqno, &s3c_irq_cam);
+		set_irq_handler(irqno, do_level_IRQ);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_irq_driver = {
+	.add	= s3c2440_irq_add,
+};
+
+static int s3c24xx_irq_driver(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
+}
+
+arch_initcall(s3c24xx_irq_driver);
+
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 726445895b5..e737eae4521 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -24,7 +24,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.iobase		= 0x3f8,
 		.irq		= 4,
 		.uartclk	= 1843200,
-		.regshift	= 2,
+		.regshift	= 0,
 		.iotype		= UPIO_PORT,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 	},
@@ -32,7 +32,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.iobase		= 0x2f8,
 		.irq		= 3,
 		.uartclk	= 1843200,
-		.regshift	= 2,
+		.regshift	= 0,
 		.iotype		= UPIO_PORT,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 	},
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index b19f00e99a2..e33fe4229d0 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -425,6 +425,9 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_ROM].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_MINICLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
 		mem_types[MT_CACHECLEAN].prot_sect |= PMD_SECT_APX|PMD_SECT_AP_WRITE;
+
+		mem_types[MT_DEVICE].prot_pte |= L_PTE_BUFFERABLE;
+		mem_types[MT_DEVICE].prot_sect |= PMD_SECT_BUFFERED;
 	}
 
 	cp = &cache_policies[cachepolicy];
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 45cc65426a2..e4a61aea534 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -29,9 +29,7 @@
  * stack+task struct.  Use the same method as 'current' uses to
  * reach them.
  */
-register unsigned long *user_registers asm("sl");
-
-#define GET_USERREG() (user_registers)
+#define GET_USERREG() ((struct pt_regs *)(THREAD_START_SP + (unsigned long)current_thread_info()) - 1)
 
 #include <linux/config.h>
 #include <linux/thread_info.h>
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
index a806fea5c3e..12885f31d34 100644
--- a/arch/arm/nwfpe/fpmodule.c
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -24,7 +24,6 @@
 #include "fpa11.h"
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/config.h>
 
 /* XXX */
@@ -133,7 +132,7 @@ void float_raise(signed char flags)
 	printk(KERN_DEBUG
 	       "NWFPE: %s[%d] takes exception %08x at %p from %08lx\n",
 	       current->comm, current->pid, flags,
-	       __builtin_return_address(0), GET_USERREG()[15]);
+	       __builtin_return_address(0), GET_USERREG()->ARM_pc);
 #endif
 
 	/* Keep SoftFloat exception flags up to date.  */
diff --git a/arch/arm/nwfpe/fpmodule.inl b/arch/arm/nwfpe/fpmodule.inl
index e5f59e9a302..2c39ad408f2 100644
--- a/arch/arm/nwfpe/fpmodule.inl
+++ b/arch/arm/nwfpe/fpmodule.inl
@@ -28,8 +28,8 @@ static inline unsigned long readRegister(const unsigned int nReg)
 	   for this in this routine.  LDF/STF instructions with Rn = PC
 	   depend on the PC being correct, as they use PC+8 in their
 	   address calculations. */
-	unsigned long *userRegisters = GET_USERREG();
-	unsigned int val = userRegisters[nReg];
+	struct pt_regs *regs = GET_USERREG();
+	unsigned int val = regs->uregs[nReg];
 	if (REG_PC == nReg)
 		val -= 4;
 	return val;
@@ -38,8 +38,8 @@ static inline unsigned long readRegister(const unsigned int nReg)
 static inline void
 writeRegister(const unsigned int nReg, const unsigned long val)
 {
-	unsigned long *userRegisters = GET_USERREG();
-	userRegisters[nReg] = val;
+	struct pt_regs *regs = GET_USERREG();
+	regs->uregs[nReg] = val;
 }
 
 static inline unsigned long readCPSR(void)
@@ -63,12 +63,12 @@ static inline unsigned long readConditionCodes(void)
 
 static inline void writeConditionCodes(const unsigned long val)
 {
-	unsigned long *userRegisters = GET_USERREG();
+	struct pt_regs *regs = GET_USERREG();
 	unsigned long rval;
 	/*
 	 * Operate directly on userRegisters since
 	 * the CPSR may be the PC register itself.
 	 */
-	rval = userRegisters[REG_CPSR] & ~CC_MASK;
-	userRegisters[REG_CPSR] = rval | (val & CC_MASK);
+	rval = regs->ARM_cpsr & ~CC_MASK;
+	regs->ARM_cpsr = rval | (val & CC_MASK);
 }
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index 1fb16f9edfd..2ede2ee8cae 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -25,7 +25,6 @@
 
 #include <linux/config.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>