summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAjay Kumar Gupta <ajay.gupta@ti.com>2009-11-22 10:11:28 -0800
committerTony Lindgren <tony@atomide.com>2009-11-22 10:24:33 -0800
commite8e51d29205b3c507a2e6126e18f76f42b49f5ca (patch)
tree7a1c6681d4c09ec29dc15689015aee88097b2b87
parentdb408023b85644e1bee80d4004aff1ff188032e9 (diff)
downloadkernel-crypto-e8e51d29205b3c507a2e6126e18f76f42b49f5ca.tar.gz
kernel-crypto-e8e51d29205b3c507a2e6126e18f76f42b49f5ca.tar.xz
kernel-crypto-e8e51d29205b3c507a2e6126e18f76f42b49f5ca.zip
omap3evm: ehci: Update EHCI support on OMAP3EVM (Rev >= E)
Added runtime programming for the differences in EHCI interface between OMAP3EVM revisions (Rev >= E) and (Rev < E). Changes: - EHCI PHY reset GPIO pin is 21 on Rev >= E while Rev < E uses GPIO pin 135. - Rev >= E uses EHCI Vbus enable GPIO22 line. - Rev >= E uses GPIO61 to select EHCI port either on main board or on Mistral Daughter Card (MDC). OMAP3EVM Rev < E doesn't have EHCI port on main board. - Currently GPIO61 it programmed to enable EHCI port on main board only. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
-rw-r--r--arch/arm/configs/omap3_evm_defconfig12
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c29
-rw-r--r--arch/arm/mach-omap2/mux.c7
-rw-r--r--arch/arm/plat-omap/include/plat/mux.h5
4 files changed, 47 insertions, 6 deletions
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index 180bf9fb3ec..da69732dd04 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -676,13 +676,19 @@ CONFIG_INPUT_EVDEV=y
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 149d45ca89a..010454f58e7 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,6 +43,8 @@
#include "mmc-twl4030.h"
#define OMAP3_EVM_TS_GPIO 175
+#define OMAP3_EVM_EHCI_VBUS 22
+#define OMAP3_EVM_EHCI_SELECT 61
#define OMAP3EVM_ETHR_START 0x2c000000
#define OMAP3EVM_ETHR_SIZE 1024
@@ -347,8 +349,9 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
+ /* PHY reset GPIO will be runtime programmed based on EVM version */
.reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 135,
+ .reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
@@ -368,9 +371,29 @@ static void __init omap3_evm_init(void)
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
#endif
+ if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+ /* enable EHCI VBUS using GPIO22 */
+ omap_cfg_reg(AF9_34XX_GPIO22);
+ gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
+ gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
+ gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
+
+ /* Select EHCI port on main board */
+ omap_cfg_reg(U3_34XX_GPIO61);
+ gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
+ gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
+ gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
+
+ /* setup EHCI phy reset config */
+ omap_cfg_reg(AH14_34XX_GPIO21);
+ ehci_pdata.reset_gpio_port[1] = 21;
+
+ } else {
+ /* setup EHCI phy reset on MDC */
+ omap_cfg_reg(AF4_34XX_GPIO135_OUT);
+ ehci_pdata.reset_gpio_port[1] = 135;
+ }
usb_musb_init();
- /* Setup EHCI phy reset padconfig */
- omap_cfg_reg(AF4_34XX_GPIO135_OUT);
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
}
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 83256d34944..c18a94eca64 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -559,6 +559,13 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
OMAP34XX_MUX_MODE0)
+/* EHCI GPIO's on OMAP3EVM (Rev >= E) */
+MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
+MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
};
#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins)
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index f74331d4a9c..ba77de60150 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -849,6 +849,11 @@ enum omap34xx_index {
/* SYS_NIRQ T2 INT1 */
AF26_34XX_SYS_NIRQ,
+
+ /* EHCI GPIO's for OMAP3EVM (Rev >= E) */
+ AH14_34XX_GPIO21,
+ AF9_34XX_GPIO22,
+ U3_34XX_GPIO61,
};
struct omap_mux_cfg {