V4L/DVB (3413): Kill nxt2002 in favor of the nxt200x module

- Kill nxt2002 module in favor of nxt200x.
- Repair broken nxt2002 support in the nxt200x module.
- Make the flexcop driver use nxt200x instead of the nxt2002 module for the
  Air2PC 2nd generation PCI card.
- Remove the nxt2002 module from cvs and kernel build.

Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

8 files changed, 57 insertions, 756 deletions

diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2583a865a58..2963605c0ec 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -4,7 +4,7 @@ config DVB_B2C2_FLEXCOP
 	select DVB_STV0299
 	select DVB_MT352
 	select DVB_MT312
-	select DVB_NXT2002
+	select DVB_NXT200X
 	select DVB_STV0297
 	select DVB_BCM3510
 	select DVB_LGDT330X
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 0b940e152b7..dbe6f6b7ee2 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -9,7 +9,7 @@
 
 #include "stv0299.h"
 #include "mt352.h"
-#include "nxt2002.h"
+#include "nxt200x.h"
 #include "bcm3510.h"
 #include "stv0297.h"
 #include "mt312.h"
@@ -343,9 +343,10 @@ static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.clock_polarity_flip = 1,
 };
 
-static struct nxt2002_config samsung_tbmv_config = {
+static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address    = 0x0a,
-	.request_firmware = flexcop_fe_request_firmware,
+	.pll_address      = 0xc2,
+	.pll_desc         = &dvb_pll_tbmv30111in,
 };
 
 static struct bcm3510_config air2pc_atsc_first_gen_config = {
@@ -505,7 +506,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 		info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
 	} else
 	/* try the air atsc 2nd generation (nxt2002) */
-	if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
+	if ((fc->fe = nxt200x_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
 		fc->dev_type          = FC_AIR_ATSC2;
 		info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
 	} else
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index db3a8b40031..f09e3da669f 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -166,18 +166,6 @@ config DVB_STV0297
 comment "ATSC (North American/Korean Terresterial DTV) frontends"
 	depends on DVB_CORE
 
-config DVB_NXT2002
-	tristate "Nxt2002 based"
-	depends on DVB_CORE
-	select FW_LOADER
-	help
-	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
-
-	  This driver needs external firmware. Please use the command
-	  "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
-	  download/extract it, and then copy it to /usr/lib/hotplug/firmware
-	  or /lib/firmware (depending on configuration of firmware hotplug).
-
 config DVB_NXT200X
 	tristate "Nextwave NXT2002/NXT2004 based"
 	depends on DVB_CORE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 615ec830e1c..8f301468568 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -25,7 +25,6 @@ obj-$(CONFIG_DVB_CX22702) += cx22702.o
 obj-$(CONFIG_DVB_TDA80XX) += tda80xx.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
-obj-$(CONFIG_DVB_NXT2002) += nxt2002.o
 obj-$(CONFIG_DVB_NXT200X) += nxt200x.o
 obj-$(CONFIG_DVB_OR51211) += or51211.o
 obj-$(CONFIG_DVB_OR51132) += or51132.o
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 1b9934ea5b0..9c9c12af579 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -326,7 +326,7 @@ struct dvb_pll_desc dvb_pll_tuv1236d = {
 };
 EXPORT_SYMBOL(dvb_pll_tuv1236d);
 
-/* Samsung TBMV30111IN
+/* Samsung TBMV30111IN / TBMV30712IN1
  * used in Air2PC ATSC - 2nd generation (nxt2002)
  */
 struct dvb_pll_desc dvb_pll_tbmv30111in = {
diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c
deleted file mode 100644
index 4f263e65ba1..00000000000
--- a/drivers/media/dvb/frontends/nxt2002.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
-    Support for B2C2/BBTI Technisat Air2PC - ATSC
-
-    Copyright (C) 2004 Taylor Jacob <rtjacob@earthlink.net>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
-#define CRC_CCIT_MASK 0x1021
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "nxt2002.h"
-
-struct nxt2002_state {
-
-	struct i2c_adapter* i2c;
-	struct dvb_frontend_ops ops;
-	const struct nxt2002_config* config;
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "nxt2002: " args); \
-	} while (0)
-
-static int i2c_writebytes (struct nxt2002_state* state, u8 reg, u8 *buf, u8 len)
-{
-	/* probbably a much better way or doing this */
-	u8 buf2 [256],x;
-	int err;
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf2, .len = len + 1 };
-
-	buf2[0] = reg;
-	for (x = 0 ; x < len ; x++)
-		buf2[x+1] = buf[x];
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk ("%s: i2c write error (addr %02x, err == %i)\n",
-			__FUNCTION__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static u8 i2c_readbytes (struct nxt2002_state* state, u8 reg, u8* buf, u8 len)
-{
-	u8 reg2 [] = { reg };
-
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = reg2, .len = 1 },
-			{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len } };
-
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
-		printk ("%s: i2c read error (addr %02x, err == %i)\n",
-			__FUNCTION__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static u16 nxt2002_crc(u16 crc, u8 c)
-{
-
-	u8 i;
-	u16 input = (u16) c & 0xFF;
-
-	input<<=8;
-	for(i=0 ;i<8 ;i++) {
-		if((crc ^ input) & 0x8000)
-			crc=(crc<<1)^CRC_CCIT_MASK;
-		else
-			crc<<=1;
-	input<<=1;
-	}
-	return crc;
-}
-
-static int nxt2002_writereg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
-	u8 buf;
-	dprintk("%s\n", __FUNCTION__);
-
-	/* set multi register length */
-	i2c_writebytes(state,0x34,&len,1);
-
-	/* set mutli register register */
-	i2c_writebytes(state,0x35,&reg,1);
-
-	/* send the actual data */
-	i2c_writebytes(state,0x36,data,len);
-
-	/* toggle the multireg write bit*/
-	buf = 0x02;
-	i2c_writebytes(state,0x21,&buf,1);
-
-	i2c_readbytes(state,0x21,&buf,1);
-
-	if ((buf & 0x02) == 0)
-		return 0;
-
-	dprintk("Error writing multireg register %02X\n",reg);
-
-	return 0;
-}
-
-static int nxt2002_readreg_multibyte (struct nxt2002_state* state, u8 reg, u8* data, u8 len)
-{
-	u8 len2;
-	dprintk("%s\n", __FUNCTION__);
-
-	/* set multi register length */
-	len2 = len & 0x80;
-	i2c_writebytes(state,0x34,&len2,1);
-
-	/* set mutli register register */
-	i2c_writebytes(state,0x35,&reg,1);
-
-	/* send the actual data */
-	i2c_readbytes(state,reg,data,len);
-
-	return 0;
-}
-
-static void nxt2002_microcontroller_stop (struct nxt2002_state* state)
-{
-	u8 buf[2],counter = 0;
-	dprintk("%s\n", __FUNCTION__);
-
-	buf[0] = 0x80;
-	i2c_writebytes(state,0x22,buf,1);
-
-	while (counter < 20) {
-		i2c_readbytes(state,0x31,buf,1);
-		if (buf[0] & 0x40)
-			return;
-		msleep(10);
-		counter++;
-	}
-
-	dprintk("Timeout waiting for micro to stop.. This is ok after firmware upload\n");
-	return;
-}
-
-static void nxt2002_microcontroller_start (struct nxt2002_state* state)
-{
-	u8 buf;
-	dprintk("%s\n", __FUNCTION__);
-
-	buf = 0x00;
-	i2c_writebytes(state,0x22,&buf,1);
-}
-
-static int nxt2002_writetuner (struct nxt2002_state* state, u8* data)
-{
-	u8 buf,count = 0;
-
-	dprintk("Tuner Bytes: %02X %02X %02X %02X\n",data[0],data[1],data[2],data[3]);
-
-	dprintk("%s\n", __FUNCTION__);
-	/* stop the micro first */
-	nxt2002_microcontroller_stop(state);
-
-	/* set the i2c transfer speed to the tuner */
-	buf = 0x03;
-	i2c_writebytes(state,0x20,&buf,1);
-
-	/* setup to transfer 4 bytes via i2c */
-	buf = 0x04;
-	i2c_writebytes(state,0x34,&buf,1);
-
-	/* write actual tuner bytes */
-	i2c_writebytes(state,0x36,data,4);
-
-	/* set tuner i2c address */
-	buf = 0xC2;
-	i2c_writebytes(state,0x35,&buf,1);
-
-	/* write UC Opmode to begin transfer */
-	buf = 0x80;
-	i2c_writebytes(state,0x21,&buf,1);
-
-	while (count < 20) {
-		i2c_readbytes(state,0x21,&buf,1);
-		if ((buf & 0x80)== 0x00)
-			return 0;
-		msleep(100);
-		count++;
-	}
-
-	printk("nxt2002: timeout error writing tuner\n");
-	return 0;
-}
-
-static void nxt2002_agc_reset(struct nxt2002_state* state)
-{
-	u8 buf;
-	dprintk("%s\n", __FUNCTION__);
-
-	buf = 0x08;
-	i2c_writebytes(state,0x08,&buf,1);
-
-	buf = 0x00;
-	i2c_writebytes(state,0x08,&buf,1);
-
-	return;
-}
-
-static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
-{
-
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 buf[256],written = 0,chunkpos = 0;
-	u16 rambase,position,crc = 0;
-
-	dprintk("%s\n", __FUNCTION__);
-	dprintk("Firmware is %zu bytes\n",fw->size);
-
-	/* Get the RAM base for this nxt2002 */
-	i2c_readbytes(state,0x10,buf,1);
-
-	if (buf[0] & 0x10)
-		rambase = 0x1000;
-	else
-		rambase = 0x0000;
-
-	dprintk("rambase on this nxt2002 is %04X\n",rambase);
-
-	/* Hold the micro in reset while loading firmware */
-	buf[0] = 0x80;
-	i2c_writebytes(state,0x2B,buf,1);
-
-	for (position = 0; position < fw->size ; position++) {
-		if (written == 0) {
-			crc = 0;
-			chunkpos = 0x28;
-			buf[0] = ((rambase + position) >> 8);
-			buf[1] = (rambase + position) & 0xFF;
-			buf[2] = 0x81;
-			/* write starting address */
-			i2c_writebytes(state,0x29,buf,3);
-		}
-		written++;
-		chunkpos++;
-
-		if ((written % 4) == 0)
-			i2c_writebytes(state,chunkpos,&fw->data[position-3],4);
-
-		crc = nxt2002_crc(crc,fw->data[position]);
-
-		if ((written == 255) || (position+1 == fw->size)) {
-			/* write remaining bytes of firmware */
-			i2c_writebytes(state, chunkpos+4-(written %4),
-				&fw->data[position-(written %4) + 1],
-				written %4);
-			buf[0] = crc << 8;
-			buf[1] = crc & 0xFF;
-
-			/* write crc */
-			i2c_writebytes(state,0x2C,buf,2);
-
-			/* do a read to stop things */
-			i2c_readbytes(state,0x2A,buf,1);
-
-			/* set transfer mode to complete */
-			buf[0] = 0x80;
-			i2c_writebytes(state,0x2B,buf,1);
-
-			written = 0;
-		}
-	}
-
-	printk ("done.\n");
-	return 0;
-};
-
-static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe,
-					     struct dvb_frontend_parameters *p)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u32 freq = 0;
-	u16 tunerfreq = 0;
-	u8 buf[4];
-
-	freq = 44000 + ( p->frequency / 1000 );
-
-	dprintk("freq = %d      p->frequency = %d\n",freq,p->frequency);
-
-	tunerfreq = freq * 24/4000;
-
-	buf[0] = (tunerfreq >> 8) & 0x7F;
-	buf[1] = (tunerfreq & 0xFF);
-
-	if (p->frequency <= 214000000) {
-		buf[2] = 0x84 + (0x06 << 3);
-		buf[3] = (p->frequency <= 172000000) ? 0x01 : 0x02;
-	} else if (p->frequency <= 721000000) {
-		buf[2] = 0x84 + (0x07 << 3);
-		buf[3] = (p->frequency <= 467000000) ? 0x02 : 0x08;
-	} else if (p->frequency <= 841000000) {
-		buf[2] = 0x84 + (0x0E << 3);
-		buf[3] = 0x08;
-	} else {
-		buf[2] = 0x84 + (0x0F << 3);
-		buf[3] = 0x02;
-	}
-
-	/* write frequency information */
-	nxt2002_writetuner(state,buf);
-
-	/* reset the agc now that tuning has been completed */
-	nxt2002_agc_reset(state);
-
-	/* set target power level */
-	switch (p->u.vsb.modulation) {
-		case QAM_64:
-		case QAM_256:
-				buf[0] = 0x74;
-				break;
-		case VSB_8:
-				buf[0] = 0x70;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	i2c_writebytes(state,0x42,buf,1);
-
-	/* configure sdm */
-	buf[0] = 0x87;
-	i2c_writebytes(state,0x57,buf,1);
-
-	/* write sdm1 input */
-	buf[0] = 0x10;
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x58,buf,2);
-
-	/* write sdmx input */
-	switch (p->u.vsb.modulation) {
-		case QAM_64:
-				buf[0] = 0x68;
-				break;
-		case QAM_256:
-				buf[0] = 0x64;
-				break;
-		case VSB_8:
-				buf[0] = 0x60;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x5C,buf,2);
-
-	/* write adc power lpf fc */
-	buf[0] = 0x05;
-	i2c_writebytes(state,0x43,buf,1);
-
-	/* write adc power lpf fc */
-	buf[0] = 0x05;
-	i2c_writebytes(state,0x43,buf,1);
-
-	/* write accumulator2 input */
-	buf[0] = 0x80;
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
-	/* write kg1 */
-	buf[0] = 0x00;
-	i2c_writebytes(state,0x4D,buf,1);
-
-	/* write sdm12 lpf fc */
-	buf[0] = 0x44;
-	i2c_writebytes(state,0x55,buf,1);
-
-	/* write agc control reg */
-	buf[0] = 0x04;
-	i2c_writebytes(state,0x41,buf,1);
-
-	/* write agc ucgp0 */
-	switch (p->u.vsb.modulation) {
-		case QAM_64:
-				buf[0] = 0x02;
-				break;
-		case QAM_256:
-				buf[0] = 0x03;
-				break;
-		case VSB_8:
-				buf[0] = 0x00;
-				break;
-		default:
-				return -EINVAL;
-				break;
-	}
-	i2c_writebytes(state,0x30,buf,1);
-
-	/* write agc control reg */
-	buf[0] = 0x00;
-	i2c_writebytes(state,0x41,buf,1);
-
-	/* write accumulator2 input */
-	buf[0] = 0x80;
-	buf[1] = 0x00;
-	nxt2002_writereg_multibyte(state,0x49,buf,2);
-	nxt2002_writereg_multibyte(state,0x4B,buf,2);
-
-	/* write agc control reg */
-	buf[0] = 0x04;
-	i2c_writebytes(state,0x41,buf,1);
-
-	nxt2002_microcontroller_start(state);
-
-	/* adjacent channel detection should be done here, but I don't
-	have any stations with this need so I cannot test it */
-
-	return 0;
-}
-
-static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 lock;
-	i2c_readbytes(state,0x31,&lock,1);
-
-	*status = 0;
-	if (lock & 0x20) {
-		*status |= FE_HAS_SIGNAL;
-		*status |= FE_HAS_CARRIER;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_SYNC;
-		*status |= FE_HAS_LOCK;
-	}
-	return 0;
-}
-
-static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[3];
-
-	nxt2002_readreg_multibyte(state,0xE6,b,3);
-
-	*ber = ((b[0] << 8) + b[1]) * 8;
-
-	return 0;
-}
-
-static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[2];
-	u16 temp = 0;
-
-	/* setup to read cluster variance */
-	b[0] = 0x00;
-	i2c_writebytes(state,0xA1,b,1);
-
-	/* get multreg val */
-	nxt2002_readreg_multibyte(state,0xA6,b,2);
-
-	temp = (b[0] << 8) | b[1];
-	*strength = ((0x7FFF - temp) & 0x0FFF) * 16;
-
-	return 0;
-}
-
-static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[2];
-	u16 temp = 0, temp2;
-	u32 snrdb = 0;
-
-	/* setup to read cluster variance */
-	b[0] = 0x00;
-	i2c_writebytes(state,0xA1,b,1);
-
-	/* get multreg val from 0xA6 */
-	nxt2002_readreg_multibyte(state,0xA6,b,2);
-
-	temp = (b[0] << 8) | b[1];
-	temp2 = 0x7FFF - temp;
-
-	/* snr will be in db */
-	if (temp2 > 0x7F00)
-		snrdb = 1000*24 + ( 1000*(30-24) * ( temp2 - 0x7F00 ) / ( 0x7FFF - 0x7F00 ) );
-	else if (temp2 > 0x7EC0)
-		snrdb = 1000*18 + ( 1000*(24-18) * ( temp2 - 0x7EC0 ) / ( 0x7F00 - 0x7EC0 ) );
-	else if (temp2 > 0x7C00)
-		snrdb = 1000*12 + ( 1000*(18-12) * ( temp2 - 0x7C00 ) / ( 0x7EC0 - 0x7C00 ) );
-	else
-		snrdb = 1000*0 + ( 1000*(12-0) * ( temp2 - 0 ) / ( 0x7C00 - 0 ) );
-
-	/* the value reported back from the frontend will be FFFF=32db 0000=0db */
-
-	*snr = snrdb * (0xFFFF/32000);
-
-	return 0;
-}
-
-static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	u8 b[3];
-
-	nxt2002_readreg_multibyte(state,0xE6,b,3);
-	*ucblocks = b[2];
-
-	return 0;
-}
-
-static int nxt2002_sleep(struct dvb_frontend* fe)
-{
-	return 0;
-}
-
-static int nxt2002_init(struct dvb_frontend* fe)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	const struct firmware *fw;
-	int ret;
-	u8 buf[2];
-
-	if (!state->initialised) {
-		/* request the firmware, this will block until someone uploads it */
-		printk("nxt2002: Waiting for firmware upload (%s)...\n", NXT2002_DEFAULT_FIRMWARE);
-		ret = state->config->request_firmware(fe, &fw, NXT2002_DEFAULT_FIRMWARE);
-		printk("nxt2002: Waiting for firmware upload(2)...\n");
-		if (ret) {
-			printk("nxt2002: no firmware upload (timeout or file not found?)\n");
-			return ret;
-		}
-
-		ret = nxt2002_load_firmware(fe, fw);
-		if (ret) {
-			printk("nxt2002: writing firmware to device failed\n");
-			release_firmware(fw);
-			return ret;
-		}
-		printk("nxt2002: firmware upload complete\n");
-
-		/* Put the micro into reset */
-		nxt2002_microcontroller_stop(state);
-
-		/* ensure transfer is complete */
-		buf[0]=0;
-		i2c_writebytes(state,0x2B,buf,1);
-
-		/* Put the micro into reset for real this time */
-		nxt2002_microcontroller_stop(state);
-
-		/* soft reset everything (agc,frontend,eq,fec)*/
-		buf[0] = 0x0F;
-		i2c_writebytes(state,0x08,buf,1);
-		buf[0] = 0x00;
-		i2c_writebytes(state,0x08,buf,1);
-
-		/* write agc sdm configure */
-		buf[0] = 0xF1;
-		i2c_writebytes(state,0x57,buf,1);
-
-		/* write mod output format */
-		buf[0] = 0x20;
-		i2c_writebytes(state,0x09,buf,1);
-
-		/* write fec mpeg mode */
-		buf[0] = 0x7E;
-		buf[1] = 0x00;
-		i2c_writebytes(state,0xE9,buf,2);
-
-		/* write mux selection */
-		buf[0] = 0x00;
-		i2c_writebytes(state,0xCC,buf,1);
-
-		state->initialised = 1;
-	}
-
-	return 0;
-}
-
-static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 500;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static void nxt2002_release(struct dvb_frontend* fe)
-{
-	struct nxt2002_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops nxt2002_ops;
-
-struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct nxt2002_state* state = NULL;
-	u8 buf [] = {0,0,0,0,0};
-
-	/* allocate memory for the internal state */
-	state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	memcpy(&state->ops, &nxt2002_ops, sizeof(struct dvb_frontend_ops));
-	state->initialised = 0;
-
-	/* Check the first 5 registers to ensure this a revision we can handle */
-
-	i2c_readbytes(state, 0x00, buf, 5);
-	if (buf[0] != 0x04) goto error;		/* device id */
-	if (buf[1] != 0x02) goto error;		/* fab id */
-	if (buf[2] != 0x11) goto error;		/* month */
-	if (buf[3] != 0x20) goto error;		/* year msb */
-	if (buf[4] != 0x00) goto error;		/* year lsb */
-
-	/* create dvb_frontend */
-	state->frontend.ops = &state->ops;
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops nxt2002_ops = {
-
-	.info = {
-		.name = "Nextwave nxt2002 VSB/QAM frontend",
-		.type = FE_ATSC,
-		.frequency_min =  54000000,
-		.frequency_max = 860000000,
-		/* stepsize is just a guess */
-		.frequency_stepsize = 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_8VSB | FE_CAN_QAM_64 | FE_CAN_QAM_256
-	},
-
-	.release = nxt2002_release,
-
-	.init = nxt2002_init,
-	.sleep = nxt2002_sleep,
-
-	.set_frontend = nxt2002_setup_frontend_parameters,
-	.get_tune_settings = nxt2002_get_tune_settings,
-
-	.read_status = nxt2002_read_status,
-	.read_ber = nxt2002_read_ber,
-	.read_signal_strength = nxt2002_read_signal_strength,
-	.read_snr = nxt2002_read_snr,
-	.read_ucblocks = nxt2002_read_ucblocks,
-
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("NXT2002 ATSC (8VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Taylor Jacob");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(nxt2002_attach);
diff --git a/drivers/media/dvb/frontends/nxt2002.h b/drivers/media/dvb/frontends/nxt2002.h
deleted file mode 100644
index 462301f577e..00000000000
--- a/drivers/media/dvb/frontends/nxt2002.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
-   Driver for the Nxt2002 demodulator
-*/
-
-#ifndef NXT2002_H
-#define NXT2002_H
-
-#include <linux/dvb/frontend.h>
-#include <linux/firmware.h>
-
-struct nxt2002_config
-{
-	/* the demodulator's i2c address */
-	u8 demod_address;
-
-	/* request firmware for device */
-	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
-};
-
-extern struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config,
-					   struct i2c_adapter* i2c);
-
-#endif // NXT2002_H
diff --git a/drivers/media/dvb/frontends/nxt200x.c b/drivers/media/dvb/frontends/nxt200x.c
index 78d2b93d35b..9e353539450 100644
--- a/drivers/media/dvb/frontends/nxt200x.c
+++ b/drivers/media/dvb/frontends/nxt200x.c
@@ -1,9 +1,10 @@
 /*
  *    Support for NXT2002 and NXT2004 - VSB/QAM
  *
- *    Copyright (C) 2005 Kirk Lapray (kirk.lapray@gmail.com)
+ *    Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
+ *    Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
  *    based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
- *    and nxt2004 by Jean-Francois Thibert (jeanfrancois@sagetv.com)
+ *    and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -614,7 +615,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 	/* write sdm1 input */
 	buf[0] = 0x10;
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x58, buf, 2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x58, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x58, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write sdmx input */
 	switch (p->u.vsb.modulation) {
@@ -632,7 +643,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 				break;
 	}
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x5C, buf, 2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x5C, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x5C, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write adc power lpf fc */
 	buf[0] = 0x05;
@@ -648,7 +669,17 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 	/* write accumulator2 input */
 	buf[0] = 0x80;
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x4B, buf, 2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x4B, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write kg1 */
 	buf[0] = 0x00;
@@ -714,8 +745,19 @@ static int nxt200x_setup_frontend_parameters (struct dvb_frontend* fe,
 	/* write accumulator2 input */
 	buf[0] = 0x80;
 	buf[1] = 0x00;
-	nxt200x_writebytes(state, 0x49, buf,2);
-	nxt200x_writebytes(state, 0x4B, buf,2);
+	switch (state->demod_chip) {
+		case NXT2002:
+			nxt200x_writereg_multibyte(state, 0x49, buf, 2);
+			nxt200x_writereg_multibyte(state, 0x4B, buf, 2);
+			break;
+		case NXT2004:
+			nxt200x_writebytes(state, 0x49, buf, 2);
+			nxt200x_writebytes(state, 0x4B, buf, 2);
+			break;
+		default:
+			return -EINVAL;
+			break;
+	}
 
 	/* write agc control reg */
 	buf[0] = 0x04;
@@ -1199,7 +1241,7 @@ module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 
 MODULE_DESCRIPTION("NXT200X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
-MODULE_AUTHOR("Kirk Lapray, Jean-Francois Thibert, and Taylor Jacob");
+MODULE_AUTHOR("Kirk Lapray, Michael Krufky, Jean-Francois Thibert, and Taylor Jacob");
 MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(nxt200x_attach);