[PATCH] ppc32: Remove board support for MCPN765

Support for the MCPN765 board is no longer maintained and thus being removed

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

8 files changed, 2 insertions, 1238 deletions

diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 3f8e003ff88..ad6c362a15b 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -613,9 +613,6 @@ config EV64260
 config LOPEC
 	bool "Motorola-LoPEC"
 
-config MCPN765
-	bool "Motorola-MCPN765"
-
 config MVME5100
 	bool "Motorola-MVME5100"
 
@@ -790,7 +787,7 @@ config PPC_OF
 
 config PPC_GEN550
 	bool
-	depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
+	depends on SANDPOINT || SPRUCE || PPLUS || PCORE || \
 		PRPMC750 || PRPMC800 || LOPEC || \
 		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
 		83xx
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index 20717193fff..3e187fe0f59 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -106,7 +106,7 @@ zimageinitrd-$(CONFIG_GEMINI)		:= zImage.initrd-STRIPELF
 
 # kconfig 'feature', only one of these will ever be 'y' at a time.
 # The rest will be unset.
-motorola := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
+motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
 $(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
 motorola := $(strip $(motorola))
 pcore := $(CONFIG_PCORE)$(CONFIG_POWERPMC250)
diff --git a/arch/ppc/configs/mcpn765_defconfig b/arch/ppc/configs/mcpn765_defconfig
deleted file mode 100644
index 899e89a9ea6..00000000000
--- a/arch/ppc/configs/mcpn765_defconfig
+++ /dev/null
@@ -1,579 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_KMOD is not set
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-CONFIG_MCPN765=y
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_HIGHMEM=y
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-CONFIG_BLK_DEV_ADMA=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-CONFIG_TULIP=y
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
index fb52acf5daa..2360bdcc79f 100644
--- a/arch/ppc/platforms/Makefile
+++ b/arch/ppc/platforms/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_GEMINI)		+= gemini_pci.o gemini_setup.o gemini_prom.o
 obj-$(CONFIG_LOPEC)		+= lopec.o
 obj-$(CONFIG_KATANA)		+= katana.o
 obj-$(CONFIG_HDPU)		+= hdpu.o
-obj-$(CONFIG_MCPN765)		+= mcpn765.o
 obj-$(CONFIG_MENF1)		+= menf1_setup.o menf1_pci.o
 obj-$(CONFIG_MVME5100)		+= mvme5100.o
 obj-$(CONFIG_PAL4)		+= pal4_setup.o pal4_pci.o
diff --git a/arch/ppc/platforms/mcpn765.c b/arch/ppc/platforms/mcpn765.c
deleted file mode 100644
index e88d294ea59..00000000000
--- a/arch/ppc/platforms/mcpn765.c
+++ /dev/null
@@ -1,527 +0,0 @@
-/*
- * arch/ppc/platforms/mcpn765.c
- *
- * Board setup routines for the Motorola MCG MCPN765 cPCI Board.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file adds support for the Motorola MCG MCPN765.
- */
-#include <linux/config.h>
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/slab.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/pci-bridge.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-#include <asm/kgdb.h>
-
-#include "mcpn765.h"
-
-static u_char mcpn765_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_POSITIVE),/* 16: i8259 cascade */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 17: COM1,2,3,4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 18: Enet 1 (front) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 19: HAWK WDT XXXX */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 20: 21554 bridge */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 21: cPCI INTA# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 22: cPCI INTB# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 23: cPCI INTC# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 24: cPCI INTD# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 25: PMC1 INTA#,PMC2 INTB#*/
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 26: PMC1 INTB#,PMC2 INTC#*/
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 27: PMC1 INTC#,PMC2 INTD#*/
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 28: PMC1 INTD#,PMC2 INTA#*/
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 29: Enet 2 (J3) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 30: Abort Switch */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 31: RTC Alarm */
-};
-
-extern void mcpn765_set_VIA_IDE_native(void);
-
-extern u_int openpic_irq(void);
-extern char cmd_line[];
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-
-int use_of_interrupt_tree = 0;
-
-static void mcpn765_halt(void);
-
-TODC_ALLOC();
-
-/*
- * Motorola MCG MCPN765 interrupt routing.
- */
-static inline int
-mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 14,  0,  0,  0 },	/* IDSEL 11 - have to manually set */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{  0,  0,  0,  0 },	/* IDSEL 13 - unused */
-		{ 18,  0,  0,  0 },	/* IDSEL 14 - Enet 0 */
-		{  0,  0,  0,  0 },	/* IDSEL 15 - unused */
-		{ 25, 26, 27, 28 },	/* IDSEL 16 - PMC Slot 1 */
-		{ 28, 25, 26, 27 },	/* IDSEL 17 - PMC Slot 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 18 - PMC 2B Connector XXXX */
-		{ 29,  0,  0,  0 },	/* IDSEL 19 - Enet 1 */
-		{ 20,  0,  0,  0 },	/* IDSEL 20 - 21554 cPCI bridge */
-	};
-
-	const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-void __init
-mcpn765_set_VIA_IDE_legacy(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-	    (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-
-		unsigned char temp;
-
-		/* put back original "standard" port base addresses */
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-				         PCI_BASE_ADDRESS_0, 0x1f1);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-				         PCI_BASE_ADDRESS_1, 0x3f5);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-				         PCI_BASE_ADDRESS_2, 0x171);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-				         PCI_BASE_ADDRESS_3, 0x375);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-				         PCI_BASE_ADDRESS_4, 0xcc01);
-
-		/* put into legacy mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp &= ~0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void
-mcpn765_set_VIA_IDE_native(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-	    (dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-
-		unsigned char temp;
-
-		/* put into native mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp |= 0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-/*
- * Initialize the VIA 82c586b.
- */
-static void __init
-mcpn765_setup_via_82c586b(void)
-{
-	struct pci_dev	*dev;
-	u_char		c;
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_0,
-				   NULL)) == NULL) {
-		printk("No VIA ISA bridge found\n");
-		mcpn765_halt();
-		/* NOTREACHED */
-	}
-
-	/*
-	 * If the firmware left the EISA 4d0/4d1 ports enabled, make sure
-	 * IRQ 14 is set for edge.
-	 */
-	pci_read_config_byte(dev, 0x47, &c);
-
-	if (c & (1<<5)) {
-		c = inb(0x4d1);
-		c &= ~(1<<6);
-		outb(c, 0x4d1);
-	}
-
-	/* Disable PNP IRQ routing since we use the Hawk's MPIC */
-	pci_write_config_dword(dev, 0x54, 0);
-	pci_write_config_byte(dev, 0x58, 0);
-
-	pci_dev_put(dev);
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_1,
-				   NULL)) == NULL) {
-		printk("No VIA ISA bridge found\n");
-		mcpn765_halt();
-		/* NOTREACHED */
-	}
-
-	/*
-	 * PPCBug doesn't set the enable bits for the IDE device.
-	 * Turn them on now.
-	 */
-	pci_read_config_byte(dev, 0x40, &c);
-	c |= 0x03;
-	pci_write_config_byte(dev, 0x40, c);
-	pci_dev_put(dev);
-
-	return;
-}
-
-void __init
-mcpn765_pcibios_fixup(void)
-{
-	/* Do MCPN765 board specific initialization.  */
-	mcpn765_setup_via_82c586b();
-}
-
-void __init
-mcpn765_find_bridges(void)
-{
-	struct pci_controller	*hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			MCPN765_PCI_IO_START,
-			MCPN765_PCI_IO_END,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			MCPN765_PCI_MEM_START,
-			MCPN765_PCI_MEM_END,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = MCPN765_PCI_IO_START;
-	hose->io_space.end = MCPN765_PCI_IO_END;
-	hose->mem_space.start = MCPN765_PCI_MEM_START;
-	hose->mem_space.end = MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose,
-		       MCPN765_HAWK_PPC_REG_BASE,
-		       MCPN765_PROC_PCI_MEM_START,
-		       MCPN765_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-		       MCPN765_PROC_PCI_IO_START,
-		       MCPN765_PROC_PCI_IO_END,
-		       MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) {
-		printk("Could not initialize HAWK bridge\n");
-	}
-
-	/* VIA IDE BAR decoders are only 16-bits wide. PCI Auto Config
-	 * will reassign the bars outside of 16-bit I/O space, which will 
-	 * "break" things. To prevent this, we'll set the IDE chip into
-	 * legacy mode and seed the bars with their legacy addresses (in 16-bit
-	 * I/O space). The Auto Config code will skip the IDE contoller in 
-	 * legacy mode, so our bar values will stick.
-	 */
-	mcpn765_set_VIA_IDE_legacy();
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	/* Now that we've got 16-bit addresses in the bars, we can switch the
-	 * IDE controller back into native mode so we can do "modern" resource
-	 * and interrupt management.
-	 */
-	mcpn765_set_VIA_IDE_native();
-
-	ppc_md.pcibios_fixup = mcpn765_pcibios_fixup;
-	ppc_md.pcibios_fixup_bus = NULL;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mcpn765_map_irq;
-
-	return;
-}
-static void __init
-mcpn765_setup_arch(void)
-{
-	struct pci_controller *hose;
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mcpn765_setup_arch: enter", 0);
-
-	loops_per_jiffy = 50000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mcpn765_setup_arch: find_bridges", 0);
-
-	/* Lookup PCI host bridges */
-	mcpn765_find_bridges();
-
-	hose = pci_bus_to_hose(0);
-	isa_io_base = (ulong)hose->io_base_virt;
-
-	TODC_INIT(TODC_TYPE_MK48T37,
-		  (MCPN765_PHYS_NVRAM_AS0 - isa_io_base),
-		  (MCPN765_PHYS_NVRAM_AS1 - isa_io_base),
-		  (MCPN765_PHYS_NVRAM_DATA - isa_io_base),
-		  8);
-
-	OpenPIC_InitSenses = mcpn765_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(mcpn765_openpic_initsenses);
-
-	printk("Motorola MCG MCPN765 cPCI Non-System Board\n");
-	printk("MCPN765 port (MontaVista Software, Inc. (source@mvista.com))\n");
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mcpn765_setup_arch: exit", 0);
-
-	return;
-}
-
-static void __init
-mcpn765_init2(void)
-{
-
-	request_region(0x00,0x20,"dma1");
-	request_region(0x20,0x20,"pic1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xa0,0x20,"pic2");
-	request_region(0xc0,0x20,"dma2");
-
-	return;
-}
-
-/*
- * Interrupt setup and service.
- * Have MPIC on HAWK and cascaded 8259s on VIA 82586 cascaded to MPIC.
- */
-static void __init
-mcpn765_init_IRQ(void)
-{
-	int i;
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: enter", 0);
-
-	openpic_init(NUM_8259_INTERRUPTS);
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			i8259_irq);
-
-	for(i=0; i < NUM_8259_INTERRUPTS; i++)
-		irq_desc[i].handler = &i8259_pic;
-
-	i8259_init(0);
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: exit", 0);
-
-	return;
-}
-
-static u32
-mcpn765_irq_canonicalize(u32 irq)
-{
-	if (irq == 2)
-		return 9;
-	else
-		return irq;
-}
-
-static unsigned long __init
-mcpn765_find_end_of_memory(void)
-{
-	return hawk_get_mem_size(MCPN765_HAWK_SMC_BASE);
-}
-
-static void __init
-mcpn765_map_io(void)
-{
-	io_block_mapping(0xfe800000, 0xfe800000, 0x00800000, _PAGE_IO);
-}
-
-static void
-mcpn765_reset_board(void)
-{
-	local_irq_disable();
-
-	/* set VIA IDE controller into native mode */
-	mcpn765_set_VIA_IDE_native();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	out_8((u_char *)MCPN765_BOARD_MODRST_REG, 0x01);
-
-	return;
-}
-
-static void
-mcpn765_restart(char *cmd)
-{
-	volatile ulong	i = 10000000;
-
-	mcpn765_reset_board();
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-mcpn765_power_off(void)
-{
-	mcpn765_halt();
-	/* NOTREACHED */
-}
-
-static void
-mcpn765_halt(void)
-{
-	local_irq_disable();
-	while (1);
-	/* NOTREACHED */
-}
-
-static int
-mcpn765_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola MCG\n");
-	seq_printf(m, "machine\t\t: MCPN765\n");
-
-	return 0;
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-mcpn765_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xfe8000fe);
-	mtspr(SPRN_DBAT1L, 0xfe80002a);
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	mcpn765_set_bat();
-
-	isa_mem_base = MCPN765_ISA_MEM_BASE;
-	pci_dram_offset = MCPN765_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-
-	ppc_md.setup_arch = mcpn765_setup_arch;
-	ppc_md.show_cpuinfo = mcpn765_show_cpuinfo;
-	ppc_md.irq_canonicalize = mcpn765_irq_canonicalize;
-	ppc_md.init_IRQ = mcpn765_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-	ppc_md.init = mcpn765_init2;
-
-	ppc_md.restart = mcpn765_restart;
-	ppc_md.power_off = mcpn765_power_off;
-	ppc_md.halt = mcpn765_halt;
-
-	ppc_md.find_end_of_memory = mcpn765_find_end_of_memory;
-	ppc_md.setup_io_mappings = mcpn765_map_io;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-
-	ppc_md.heartbeat = NULL;
-	ppc_md.heartbeat_reset = 0;
-	ppc_md.heartbeat_count = 0;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	return;
-}
diff --git a/arch/ppc/platforms/mcpn765.h b/arch/ppc/platforms/mcpn765.h
deleted file mode 100644
index 4d35ecad097..00000000000
--- a/arch/ppc/platforms/mcpn765.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/ppc/platforms/mcpn765.h
- *
- * Definitions for Motorola MCG MCPN765 cPCI Board.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * From Processor to PCI:
- *   PCI Mem Space: 0x80000000 - 0xc0000000 -> 0x80000000 - 0xc0000000 (1 GB)
- *   PCI I/O Space: 0xfd800000 - 0xfe000000 -> 0x00000000 - 0x00800000 (8 MB)
- *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *   MPIC in PCI Mem Space: 0xfe800000 - 0xfe830000 (not all used by MPIC)
- *
- * From PCI to Processor:
- *   System Memory: 0x00000000 -> 0x00000000
- */
-
-#ifndef __PPC_PLATFORMS_MCPN765_H
-#define __PPC_PLATFORMS_MCPN765_H
-#include <linux/config.h>
-
-/* PCI Memory space mapping info */
-#define	MCPN765_PCI_MEM_SIZE		0x40000000U
-#define MCPN765_PROC_PCI_MEM_START	0x80000000U
-#define MCPN765_PROC_PCI_MEM_END	(MCPN765_PROC_PCI_MEM_START +	\
-					 MCPN765_PCI_MEM_SIZE - 1)
-#define MCPN765_PCI_MEM_START		0x80000000U
-#define MCPN765_PCI_MEM_END		(MCPN765_PCI_MEM_START +	\
-					 MCPN765_PCI_MEM_SIZE - 1)
-
-/* PCI I/O space mapping info */
-#define	MCPN765_PCI_IO_SIZE		0x00800000U
-#define MCPN765_PROC_PCI_IO_START	0xfd800000U
-#define MCPN765_PROC_PCI_IO_END		(MCPN765_PROC_PCI_IO_START +	\
-					 MCPN765_PCI_IO_SIZE - 1)
-#define MCPN765_PCI_IO_START		0x00000000U
-#define MCPN765_PCI_IO_END		(MCPN765_PCI_IO_START + 	\
-					 MCPN765_PCI_IO_SIZE - 1)
-
-/* System memory mapping info */
-#define MCPN765_PCI_DRAM_OFFSET		0x00000000U
-#define MCPN765_PCI_PHY_MEM_OFFSET	0x00000000U
-
-#define MCPN765_ISA_MEM_BASE		0x00000000U
-#define MCPN765_ISA_IO_BASE		MCPN765_PROC_PCI_IO_START
-
-/* Define base addresses for important sets of registers */
-#define MCPN765_HAWK_MPIC_BASE		0xfe800000U
-#define MCPN765_HAWK_SMC_BASE		0xfef80000U
-#define	MCPN765_HAWK_PPC_REG_BASE	0xfeff0000U
-
-/* Define MCPN765 board register addresses. */
-#define	MCPN765_BOARD_STATUS_REG	0xfef88080U
-#define	MCPN765_BOARD_MODFAIL_REG	0xfef88090U
-#define	MCPN765_BOARD_MODRST_REG	0xfef880a0U
-#define	MCPN765_BOARD_TBEN_REG		0xfef880c0U
-#define	MCPN765_BOARD_GEOGRAPHICAL_REG	0xfef880e8U
-#define	MCPN765_BOARD_EXT_FEATURE_REG	0xfef880f0U
-#define	MCPN765_BOARD_LAST_RESET_REG	0xfef880f8U
-
-/* Defines for UART */
-
-/* Define the UART base addresses */
-#define	MCPN765_SERIAL_1		0xfef88000
-#define	MCPN765_SERIAL_2		0xfef88200
-#define	MCPN765_SERIAL_3		0xfef88400
-#define	MCPN765_SERIAL_4		0xfef88600
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  4
-#endif
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD	( 1843200 / 16 )
-#define UART_CLK	1843200
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-/* All UART IRQ's are wire-OR'd to IRQ 17 */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, MCPN765_SERIAL_1, 17, STD_COM_FLAGS, /* ttyS0 */\
-		iomem_base: (u8 *)MCPN765_SERIAL_1,			\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },				\
-        { 0, BASE_BAUD, MCPN765_SERIAL_2, 17, STD_COM_FLAGS, /* ttyS1 */\
-		iomem_base: (u8 *)MCPN765_SERIAL_2,			\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },				\
-        { 0, BASE_BAUD, MCPN765_SERIAL_3, 17, STD_COM_FLAGS, /* ttyS2 */\
-		iomem_base: (u8 *)MCPN765_SERIAL_3,			\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },				\
-        { 0, BASE_BAUD, MCPN765_SERIAL_4, 17, STD_COM_FLAGS, /* ttyS3 */\
-		iomem_base: (u8 *)MCPN765_SERIAL_4,			\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-/* Define the NVRAM/RTC address strobe & data registers */
-#define MCPN765_PHYS_NVRAM_AS0          0xfef880c8U
-#define MCPN765_PHYS_NVRAM_AS1          0xfef880d0U
-#define MCPN765_PHYS_NVRAM_DATA         0xfef880d8U
-
-extern void mcpn765_find_bridges(void);
-
-#endif /* __PPC_PLATFORMS_MCPN765_H */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 54e5666939b..0c044c51dcc 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -54,8 +54,6 @@ obj-$(CONFIG_LOPEC)		+= i8259.o pci_auto.o todc_time.o
 obj-$(CONFIG_HDPU)		+= pci_auto.o
 obj-$(CONFIG_LUAN)		+= indirect_pci.o pci_auto.o todc_time.o
 obj-$(CONFIG_KATANA)		+= pci_auto.o
-obj-$(CONFIG_MCPN765)		+= todc_time.o indirect_pci.o pci_auto.o \
-					open_pic.o i8259.o hawk_common.o
 obj-$(CONFIG_MENF1)		+= todc_time.o i8259.o mpc10x_common.o \
 					pci_auto.o indirect_pci.o
 obj-$(CONFIG_MV64360)		+= mv64360_pic.o
diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
index 6d47438be58..485a924e4d0 100644
--- a/include/asm-ppc/serial.h
+++ b/include/asm-ppc/serial.h
@@ -18,8 +18,6 @@
 #include <platforms/powerpmc250.h>
 #elif defined(CONFIG_LOPEC)
 #include <platforms/lopec.h>
-#elif defined(CONFIG_MCPN765)
-#include <platforms/mcpn765.h>
 #elif defined(CONFIG_MVME5100)
 #include <platforms/mvme5100.h>
 #elif defined(CONFIG_PAL4)