diff options
Diffstat (limited to 'm4/tcl.m4')
| -rw-r--r-- | m4/tcl.m4 | 3960 |
1 files changed, 3960 insertions, 0 deletions
diff --git a/m4/tcl.m4 b/m4/tcl.m4 new file mode 100644 index 0000000..20e97ed --- /dev/null +++ b/m4/tcl.m4 @@ -0,0 +1,3960 @@ +# tcl.m4 -- +# +# This file provides a set of autoconf macros to help TEA-enable +# a Tcl extension. +# +# Copyright (c) 1999-2000 Ajuba Solutions. +# Copyright (c) 2002-2005 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# RCS: @(#) $Id: tcl.m4,v 1.92 2006/05/26 19:15:38 das Exp $ + +AC_PREREQ(2.59) + +dnl TEA extensions pass this us the version of TEA they think they +dnl are compatible with (must be set in TEA_INIT below) +dnl TEA_VERSION="3.5" + +# Possible values for key variables defined: +# +# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') +# TEA_PLATFORM - windows unix +# + +#------------------------------------------------------------------------ +# TEA_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TCLCONFIG], [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, + AC_HELP_STRING([--with-tcl], + [directory containing tcl configuration (tclConfig.sh)]), + with_tclconfig=${withval}) + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + case ${with_tclconfig} in + */tclConfig.sh ) + if test -f ${with_tclconfig}; then + AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) + with_tclconfig=`echo ${with_tclconfig} | sed 's!/tclConfig\.sh$!!'` + fi ;; + esac + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tcl.framework/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/Tcl.framework; pwd)` + break + fi + done + fi + + # on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i; pwd)` + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_WARN([Can't find Tcl configuration definitions]) + exit 0 + else + no_tcl= + TCL_BIN_DIR=${ac_cv_c_tclconfig} + AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_TKCONFIG], [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, + AC_HELP_STRING([--with-tk], + [directory containing tk configuration (tkConfig.sh)]), + with_tkconfig=${withval}) + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + case ${with_tkconfig} in + */tkConfig.sh ) + if test -f ${with_tkconfig}; then + AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) + with_tkconfig=`echo ${with_tkconfig} | sed 's!/tkConfig\.sh$!!'` + fi ;; + esac + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + + # on Darwin, check in Framework installation locations + if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ + `ls -d /Library/Frameworks 2>/dev/null` \ + `ls -d /Network/Library/Frameworks 2>/dev/null` \ + `ls -d /System/Library/Frameworks 2>/dev/null` \ + ; do + if test -f "$i/Tk.framework/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/Tk.framework; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i; pwd)` + break + fi + done + fi + + # on Windows, check in common installation locations + if test "${TEA_PLATFORM}" = "windows" \ + -a x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d C:/Tcl/lib 2>/dev/null` \ + `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i; pwd)` + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_WARN([Can't find Tk configuration definitions]) + exit 0 + else + no_tk= + TK_BIN_DIR=${ac_cv_c_tkconfig} + AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Subst the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +# +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TCLCONFIG], [ + AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) + + if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . ${TCL_BIN_DIR}/tclConfig.sh + else + AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f ${TCL_BIN_DIR}/Makefile ; then + TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} + TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} + TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} + elif test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tcl.framework installed in an arbitary location. + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -f ${TCL_BIN_DIR}/${TCL_LIB_FILE}; then + for i in "`cd ${TCL_BIN_DIR}; pwd`" \ + "`cd ${TCL_BIN_DIR}/../..; pwd`"; do + if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then + TCL_LIB_SPEC="-F`dirname "$i"` -framework ${TCL_LIB_FILE}" + break + fi + done + fi + if test -f ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}; then + TCL_STUB_LIB_SPEC="-L${TCL_BIN_DIR} ${TCL_STUB_LIB_FLAG}" + TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TCL_DBGX substitution + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + AC_SUBST(TCL_VERSION) + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + + AC_SUBST(TCL_LIB_FILE) + AC_SUBST(TCL_LIB_FLAG) + AC_SUBST(TCL_LIB_SPEC) + + AC_SUBST(TCL_STUB_LIB_FILE) + AC_SUBST(TCL_STUB_LIB_FLAG) + AC_SUBST(TCL_STUB_LIB_SPEC) + + AC_SUBST(TCL_LIBS) + AC_SUBST(TCL_DEFS) + AC_SUBST(TCL_EXTRA_CFLAGS) + AC_SUBST(TCL_LD_FLAGS) + AC_SUBST(TCL_SHLIB_LD_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_TKCONFIG], [ + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + AC_MSG_RESULT([loading]) + . ${TK_BIN_DIR}/tkConfig.sh + else + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + if test -f ${TK_BIN_DIR}/Makefile ; then + TK_LIB_SPEC=${TK_BUILD_LIB_SPEC} + TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC} + TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH} + elif test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use the libraries + # from the framework at the given location so that linking works + # against Tk.framework installed in an arbitary location. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -f ${TK_BIN_DIR}/${TK_LIB_FILE}; then + for i in "`cd ${TK_BIN_DIR}; pwd`" \ + "`cd ${TK_BIN_DIR}/../..; pwd`"; do + if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then + TK_LIB_SPEC="-F`dirname "$i"` -framework ${TK_LIB_FILE}" + break + fi + done + fi + if test -f ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}; then + TK_STUB_LIB_SPEC="-L${TK_BIN_DIR} ${TK_STUB_LIB_FLAG}" + TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" + fi + ;; + esac + fi + + # eval is required to do the TK_DBGX substitution + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + # Ensure windowingsystem is defined + if test "${TEA_PLATFORM}" = "unix" ; then + case ${TK_DEFS} in + *MAC_OSX_TK*) + AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) + TEA_WINDOWINGSYSTEM="aqua" + ;; + *) + TEA_WINDOWINGSYSTEM="x11" + ;; + esac + elif test "${TEA_PLATFORM}" = "windows" ; then + TEA_WINDOWINGSYSTEM="win32" + fi + + AC_SUBST(TK_VERSION) + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + + AC_SUBST(TK_LIB_FILE) + AC_SUBST(TK_LIB_FLAG) + AC_SUBST(TK_LIB_SPEC) + + AC_SUBST(TK_STUB_LIB_FILE) + AC_SUBST(TK_STUB_LIB_FLAG) + AC_SUBST(TK_STUB_LIB_SPEC) + + AC_SUBST(TK_LIBS) + AC_SUBST(TK_XINCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SHARED], [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + AC_HELP_STRING([--enable-shared], + [build and link with shared libraries (default: on)]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) + fi + AC_SUBST(SHARED_BUILD) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_THREADS -- +# +# Specify if thread support should be enabled. If "yes" is specified +# as an arg (optional), threads are enabled by default, "no" means +# threads are disabled. "yes" is the default. +# +# TCL_THREADS is checked so that if you are compiling an extension +# against a threaded core, your extension must be compiled threaded +# as well. +# +# Note that it is legal to have a thread enabled extension run in a +# threaded or non-threaded Tcl core, but a non-threaded extension may +# only run in a non-threaded Tcl core. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# _THREAD_SAFE +# +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_THREADS], [ + AC_ARG_ENABLE(threads, + AC_HELP_STRING([--enable-threads], + [build with threads]), + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_threads+set}" = set; then + enableval="$enable_threads" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants: + + # USE_THREAD_ALLOC tells us to try the special thread-based + # allocator that significantly reduces lock contention + AC_DEFINE(USE_THREAD_ALLOC, 1, + [Do we want to use the threaded memory allocator?]) + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + if test "`uname -s`" = "SunOS" ; then + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + fi + AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the same + # library, as some systems hide it there until pthread.h is + # defined. We could alternatively do an AC_TRY_COMPILE with + # pthread.h, but that will work with libpthread really doesn't + # exist, like AIX 4.2. [Bug: 4359] + AC_CHECK_LIB(pthread, __pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "no"; then + AC_CHECK_LIB(c_r, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) + fi + fi + fi + fi + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + AC_MSG_CHECKING([for building with threads]) + if test "${TCL_THREADS}" = 1; then + AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) + AC_MSG_RESULT([yes (default)]) + else + AC_MSG_RESULT([no]) + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + AC_MSG_WARN([ + Building ${PACKAGE_NAME} without threads enabled, but building against Tcl + that IS thread-enabled. It is recommended to use --enable-threads.]) + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + AC_MSG_WARN([ + --enable-threads requested, but building against a Tcl that is NOT + thread-enabled. This is an OK configuration that will also run in + a thread-enabled core.]) + fi + ;; + esac + AC_SUBST(TCL_THREADS) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used. +# Memory (TCL_MEM_DEBUG) debugging can also be enabled. +# +# Arguments: +# none +# +# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives +# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. +# Requires the following vars to be set in the Makefile: +# CFLAGS_DEFAULT +# LDFLAGS_DEFAULT +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true +# Sets to $(CFLAGS_OPTIMIZE) if false +# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true +# Sets to $(LDFLAGS_OPTIMIZE) if false +# DBGX Formerly used as debug library extension; +# always blank now. +# +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_SYMBOLS], [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_CONFIG_CFLAGS]) + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, + AC_HELP_STRING([--enable-symbols], + [build with debugging symbols (default: off)]), + [tcl_ok=$enableval], [tcl_ok=no]) + DBGX="" + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + AC_MSG_RESULT([no]) + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT([yes (standard debugging)]) + fi + fi + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + + AC_SUBST(TCL_DBGX) + AC_SUBST(CFLAGS_DEFAULT) + AC_SUBST(LDFLAGS_DEFAULT) + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + AC_MSG_RESULT([enabled symbols mem debugging]) + else + AC_MSG_RESULT([enabled $tcl_ok debugging]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_LANGINFO -- +# +# Allows use of modern nl_langinfo check for better l10n. +# This is only relevant for Unix. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-langinfo=yes|no (default is yes) +# +# Defines the following vars: +# HAVE_LANGINFO Triggers use of nl_langinfo if defined. +# +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_ENABLE_LANGINFO], [ + AC_ARG_ENABLE(langinfo, + AC_HELP_STRING([--enable-langinfo], + [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), + [langinfo_ok=$enableval], [langinfo_ok=yes]) + + HAVE_LANGINFO=0 + if test "$langinfo_ok" = "yes"; then + AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) + fi + AC_MSG_CHECKING([whether to use nl_langinfo]) + if test "$langinfo_ok" = "yes"; then + AC_CACHE_VAL(tcl_cv_langinfo_h, + AC_TRY_COMPILE([#include <langinfo.h>], [nl_langinfo(CODESET);], + [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])) + AC_MSG_RESULT([$tcl_cv_langinfo_h]) + if test $tcl_cv_langinfo_h = yes; then + AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) + fi + else + AC_MSG_RESULT([$langinfo_ok]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_SYSTEM +# +# Determine what the system is (some things cannot be easily checked +# on a feature-driven basis, alas). This can usually be done via the +# "uname" command, but there are a few systems, like Next, where +# this doesn't work. +# +# Arguments: +# none +# +# Results: +# Defines the following var: +# +# system - System/platform/version identification code. +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_SYSTEM], [ + AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_cv_sys_version=windows + elif test -f /usr/lib/NextStep/software_version; then + tcl_cv_sys_version=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + tcl_cv_sys_version=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_WARN([can't find uname command]) + tcl_cv_sys_version=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + tcl_cv_sys_version=MP-RAS-`awk '{print [$]3}' /etc/.relid` + fi + if test "`uname -s`" = "AIX" ; then + tcl_cv_sys_version=AIX-`uname -v`.`uname -r` + fi + fi + fi + ]) + system=$tcl_cv_sys_version +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines and substitutes the following vars: +# +# DL_OBJS - Name of the object file that implements dynamic +# loading for Tcl on this system. +# DL_LIBS - Library file(s) to include in tclsh and other base +# applications in order for the "load" command to work. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. Could +# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. +# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol is +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# LIB_SUFFIX - Specifies everything that comes after the "libfoo" +# in a static or shared library name, using the $VERSION variable +# to put the version in the right place. This is used +# by platforms that need non-standard library names. +# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs +# to have a version after the .so, and ${VERSION}.a +# on AIX, since a shared library needs to have +# a .a extension whereas shared objects for loadable +# extensions have a .so extension. Defaults to +# ${VERSION}${SHLIB_SUFFIX}. +# TCL_NEEDS_EXP_FILE - +# 1 means that an export file is needed to link to a +# shared library. +# TCL_EXP_FILE - The name of the installed export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# TCL_BUILD_EXP_FILE - +# The name of the built export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_CONFIG_CFLAGS], [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + + # Step 0.a: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is requested]) + AC_ARG_ENABLE(64bit, + AC_HELP_STRING([--enable-64bit], + [enable 64bit support (default: off)]), + [do64bit=$enableval], [do64bit=no]) + AC_MSG_RESULT([$do64bit]) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis, + AC_HELP_STRING([--enable-64bit-vis], + [enable 64bit Sparc VIS support (default: off)]), + [do64bitVIS=$enableval], [do64bitVIS=no]) + AC_MSG_RESULT([$do64bitVIS]) + + if test "$do64bitVIS" = "yes"; then + # Force 64bit on with VIS + do64bit=yes + fi + + # Step 0.c: Cross-compiling options for Windows/CE builds? + + if test "${TEA_PLATFORM}" = "windows" ; then + AC_MSG_CHECKING([if Windows/CE build is requested]) + AC_ARG_ENABLE(wince,[ --enable-wince enable Win/CE support (where applicable)], [doWince=$enableval], [doWince=no]) + AC_MSG_RESULT([$doWince]) + fi + + # Step 1: set the variable "system" to hold the name and version number + # for the system. + + TEA_CONFIG_SYSTEM + + # Step 2: check for existence of -ldl library. This is needed because + # Linux can use either -ldl or -ldld for dynamic loading. + + AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) + + # Require ranlib early so we can override it in special cases below. + + AC_REQUIRE([AC_PROG_LIBTOOL]) + + # Step 3: set configuration options based on system name and version. + # This is similar to Tcl's unix/tcl.m4 except that we've added a + # "windows" case. + + do64bit_ok=no + LDFLAGS_ORIG="$LDFLAGS" + # When ld needs options to work in 64-bit mode, put them in + # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] + # is disabled by the user. [Bug 1016796] + LDFLAGS_ARCH="" + TCL_EXPORT_FILE_SUFFIX="" + UNSHARED_LIB_SUFFIX="" + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + CFLAGS_OPTIMIZE=-O + if test "$GCC" = "yes" ; then + CFLAGS_OPTIMIZE=-O2 + CFLAGS_WARNING="-Wall -Wno-implicit-int" + else + CFLAGS_WARNING="" + fi + TCL_NEEDS_EXP_FILE=0 + TCL_BUILD_EXP_FILE="" + TCL_EXP_FILE="" +dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. +dnl AC_CHECK_TOOL(AR, ar) + AC_CHECK_PROG(AR, ar, ar) + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + case $system in + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs + # MACHINE is IX86 for LINK, but this is used by the manifest, + # which requires x86|amd64|ia64. + MACHINE="X86" + if test "$do64bit" != "no" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft Platform SDK" + fi + MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` + PATH64="" + case "$do64bit" in + amd64|x64|yes) + MACHINE="AMD64" ; # default to AMD64 64-bit build + PATH64="${MSSDK}/Bin/Win64/x86/AMD64" + ;; + ia64) + MACHINE="IA64" + PATH64="${MSSDK}/Bin/Win64" + ;; + esac + if test ! -d "${PATH64}" ; then + AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) + AC_MSG_WARN([Ensure latest Platform SDK is installed]) + do64bit="no" + else + AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" != "no" ; then + AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) + fi + if test "$GCC" = "yes" ; then + AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) + fi + TEA_PATH_CELIB + # Set defaults for common evc4/PPC2003 setup + # Currently Tcl requires 300+, possibly 420+ for sockets + CEVERSION=420; # could be 211 300 301 400 420 ... + TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... + ARCH=ARM; # could be ARM MIPS X86EM ... + PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" + if test "$doWince" != "yes"; then + # If !yes then the user specified something + # Reset ARCH to allow user to skip specifying it + ARCH= + eval `echo $doWince | awk -F, '{ \ + if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ + if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ + if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ + if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ + if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ + }'` + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; + fi + fi + OSVERSION=WCE$CEVERSION; + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" + if test ! -d "${WCEROOT}" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Program Files/Windows CE Tools" + if test ! -d "${SDKROOT}" ; then + SDKROOT="C:/Windows CE Tools" + fi + fi + WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) + doWince="no" + else + # We could PATH_NOSPACE these, but that's not important, + # as long as we quote them when used. + CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" + if test -d "${CEINCLUDE}/${TARGETCPU}" ; then + CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" + fi + CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" != "no" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + CC="\"${PATH64}/cl.exe\"" + CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" + RC="\"${MSSDK}/bin/rc.exe\"" + lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" + LINKBIN="\"${PATH64}/link.exe\"" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + # Avoid 'unresolved external symbol __security_cookie' + # errors, c.f. http://support.microsoft.com/?id=894573 + TEA_ADD_LIBS([bufferoverflowU.lib]) + elif test "$doWince" != "no" ; then + CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" + if test "${TARGETCPU}" = "X86"; then + CC="\"${CEBINROOT}/cl.exe\"" + else + CC="\"${CEBINROOT}/cl${ARCH}.exe\"" + fi + CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" + arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` + defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" + if test "${SHARED_BUILD}" = "1" ; then + # Static CE builds require static celib as well + defs="${defs} _DLL" + fi + for i in $defs ; do + AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) + done + AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) + AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` + lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" + LINKBIN="\"${CEBINROOT}/link.exe\"" + AC_SUBST(CELIB_DIR) + else + RC="rc" + lflags="-nologo" + LINKBIN="link" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + RC="windres" + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + SHLIB_LD="$CC -shared" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + else + SHLIB_LD="${LINKBIN} -dll ${lflags}" + # link -lib only works when -lib is the first arg + STLIB_LD="${LINKBIN} -lib ${lflags}" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' + + TCL_LIB_VERSIONS_OK=nodots + # Bogus to avoid getting this turned off + DL_OBJS="tclLoadNone.obj" + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then + # AIX requires the _r compiler when gcc isn't being used + case "${CC}" in + *_r) + # ok ... + ;; + *) + CC=${CC}_r + ;; + esac + AC_MSG_RESULT([Using $CC for compiling with threads]) + fi + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + DL_OBJS="tclLoadDl.o" + LD_LIBRARY_PATH_VAR="LIBPATH" + + # Check to enable 64-bit flags for compiler/linker on AIX 4+ + if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + else + do64bit_ok=yes + CFLAGS="$CFLAGS -q64" + LDFLAGS_ARCH="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + fi + fi + + if test "`uname -m`" = "ia64" ; then + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + # AIX-5 has dl* in libc.so + DL_LIBS="" + if test "$GCC" = "yes" ; then + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + fi + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + else + if test "$GCC" = "yes" ; then + SHLIB_LD="gcc -shared" + else + SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" + fi + SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix ${SHLIB_LD} ${SHLIB_LD_FLAGS}" + DL_LIBS="-ldl" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + TCL_NEEDS_EXP_FILE=1 + TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}.exp' + fi + + # AIX v<=4.1 has some different flags than 4.2+ + if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then + AC_LIBOBJ([tclLoadAix]) + DL_LIBS="-lld" + fi + + # On AIX <=v4 systems, libbsd.a has to be linked in to support + # non-blocking file IO. This library has to be linked in after + # the MATH_LIBS or it breaks the pow() function. The way to + # insure proper sequencing, is to add it to the tail of MATH_LIBS. + # This library also supplies gettimeofday. + # + # AIX does not have a timezone field in struct tm. When the AIX + # bsd library is used, the timezone global and the gettimeofday + # methods are to be avoided for timezone deduction instead, we + # deduce the timezone by comparing the localtime result on a + # known GMT value. + + AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) + if test $libbsd = yes; then + MATH_LIBS="$MATH_LIBS -lbsd" + AC_DEFINE(USE_DELTA_FOR_TZ, 1, [Do we need a special AIX hack for timezones?]) + fi + ;; + BeOS*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="${CC} -nostart" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + + #----------------------------------------------------------- + # Check for inet_ntoa in -lbind, for BeOS (which also needs + # -lsocket, even if the network functions are in -lnet which + # is always linked to, for compatibility. + #----------------------------------------------------------- + AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) + ;; + BSD/OS-2.1*|BSD/OS-3*) + SHLIB_CFLAGS="" + SHLIB_LD="shlicc -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD="cc -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + dgux*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) + # Needed by Tcl, but not most extensions + #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) + #LIBS="$LIBS -lxnet" # Use the XOPEN network library + + SHLIB_SUFFIX=".sl" + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + fi + if test "$GCC" = "yes" ; then + SHLIB_LD="gcc -shared" + SHLIB_LD_LIBS='${LIBS}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + fi + + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #CFLAGS="$CFLAGS +DAportable" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + hpux_arch=`${CC} -dumpmachine` + case $hpux_arch in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS='${LIBS}' + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + ;; + *) + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + ;; + esac + else + do64bit_ok=yes + CFLAGS="$CFLAGS +DD64" + LDFLAGS_ARCH="+DD64" + fi + fi + ;; + HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) + SHLIB_SUFFIX=".sl" + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS="" + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="$LDFLAGS -Wl,-E" + CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + fi + ;; + IRIX-5.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + ;; + IRIX-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + CFLAGS="$CFLAGS -mabi=n32" + LDFLAGS="$LDFLAGS -mabi=n32" + else + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" + ;; + *) + CFLAGS="$CFLAGS -n32" + ;; + esac + LDFLAGS="$LDFLAGS -n32" + fi + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + + # Check to enable 64-bit flags for compiler/linker + + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN([64bit mode not supported by gcc]) + else + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + CFLAGS="$CFLAGS -64" + LDFLAGS_ARCH="-64" + fi + fi + ;; + Linux*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" + # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings + # when you inline the string and math operations. Turn this off to + # get rid of the warnings. + #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" + + SHLIB_LD="${CC} -shared" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "`uname -m`" = "alpha" ; then + CFLAGS="$CFLAGS -mieee" + fi + + # The combo of gcc + glibc has a bug related + # to inlining of functions like strtod(). The + # -fno-builtin flag should address this problem + # but it does not work. The -fno-inline flag + # is kind of overkill but it works. + # Disable inlining only when one of the + # files in compat/*.c is being linked in. + if test x"${USE_COMPAT}" != x ; then + CFLAGS="$CFLAGS -fno-inline" + fi + + ;; + GNU*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + SHLIB_LD="${CC} -shared" + DL_OBJS="" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,--export-dynamic" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + if test "`uname -m`" = "alpha" ; then + CFLAGS="$CFLAGS -mieee" + fi + ;; + Lynx*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + CFLAGS_OPTIMIZE=-02 + SHLIB_LD="${CC} -shared " + DL_OBJS="tclLoadDl.o" + DL_LIBS="-mshared -ldl" + LD_FLAGS="-Wl,--export-dynamic" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + ;; + MP-RAS-02*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + MP-RAS-*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="$LDFLAGS -Wl,-Bexport" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + NetBSD-*|FreeBSD-[[1-2]].*) + # NetBSD/SPARC needs -fPIC, -fpic will not do. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [ + AC_EGREP_CPP(yes, [ +#ifdef __ELF__ + yes +#endif + ], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)]) + if test $tcl_cv_ld_elf = yes; then + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' + else + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + fi + + # Ancient FreeBSD doesn't handle version numbers with dots. + + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + OpenBSD-*) + # OpenBSD/SPARC[64] needs -fPIC, -fpic will not do. + case `machine` in + sparc|sparc64) + SHLIB_CFLAGS="-fPIC";; + *) + SHLIB_CFLAGS="-fpic";; + esac + SHLIB_LD="${CC} -shared ${SHLIB_CFLAGS}" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [ + AC_EGREP_CPP(yes, [ +#ifdef __ELF__ + yes +#endif + ], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)]) + if test $tcl_cv_ld_elf = yes; then + LDFLAGS=-Wl,-export-dynamic + else + LDFLAGS="" + fi + + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + FreeBSD-*) + # FreeBSD 3.* and greater have ELF. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS -export-dynamic" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + if test "${TCL_THREADS}" = "1" ; then + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + case $system in + FreeBSD-3.*) + # FreeBSD-3 doesn't handle version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' + TCL_LIB_VERSIONS_OK=nodots + ;; + esac + ;; + Darwin-*) + CFLAGS_OPTIMIZE="-Os" + SHLIB_CFLAGS="-fno-common" + if test $do64bit = yes; then + do64bit_ok=yes + CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" + fi + # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS here: + SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' + AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" + AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) + LDFLAGS=$hold_ldflags]) + if test $tcl_cv_ld_single_module = yes; then + SHLIB_LD="${SHLIB_LD} -Wl,-single_module" + fi + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dylib" + DL_OBJS="tclLoadDyld.o" + DL_LIBS="" + # Don't use -prebind when building for Mac OS X 10.4 or later only: + test -z "${MACOSX_DEPLOYMENT_TARGET}" || \ + test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F. '{print [$]2}'`" -lt 4 && \ + LDFLAGS="$LDFLAGS -prebind" + LDFLAGS="$LDFLAGS -headerpad_max_install_names" + AC_CACHE_CHECK([if ld accepts -search_paths_first flag], tcl_cv_ld_search_paths_first, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, tcl_cv_ld_search_paths_first=no) + LDFLAGS=$hold_ldflags]) + if test $tcl_cv_ld_search_paths_first = yes; then + LDFLAGS="$LDFLAGS -Wl,-search_paths_first" + fi + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + + # TEA specific: for Tk extensions, remove -arch ppc64 from CFLAGS + # for fat builds, as neither TkAqua nor TkX11 can be built for 64bit + # at present (no 64bit GUI libraries). + test $do64bit_ok = no && test -n "${TK_BIN_DIR}" && \ + CFLAGS="`echo "$CFLAGS" | sed -e 's/-arch ppc64/-arch ppc/g'`" + ;; + NEXTSTEP-*) + SHLIB_CFLAGS="" + SHLIB_LD="cc -nostdlib -r" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadNext.o" + DL_LIBS="" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h + [Should OS/390 do the right thing with sockets?]) + ;; + OSF1-1.0|OSF1-1.1|OSF1-1.2) + # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 + SHLIB_CFLAGS="" + # Hack: make package name same as library name + SHLIB_LD='ld -R -export $@:' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadOSF.o" + DL_LIBS="" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-1.*) + # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 + SHLIB_CFLAGS="-fPIC" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD="ld -shared" + else + SHLIB_LD="ld -non_shared" + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD='ld -shared -expect_unresolved "*"' + else + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + CFLAGS="$CFLAGS -mieee" + else + CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" + fi + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = "1" ; then + CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + if test "$GCC" = "yes" ; then + LIBS="$LIBS -lpthread -lmach -lexc" + else + CFLAGS="$CFLAGS -pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + fi + + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + # dlopen is in -lc on QNX + DL_LIBS="" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SCO_SV-3.2*) + # Note, dlopen is available only on SCO 3.2.5 and greater. However, + # this test works, since "uname -s" was non-standard in 3.2.4 and + # below. + if test "$GCC" = "yes" ; then + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" + else + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" + fi + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SINIX*5.4*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-4*) + SHLIB_CFLAGS="-PIC" + SHLIB_LD="ld" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + + # SunOS can't handle version numbers with dots in them in library + # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it + # requires an extra version number at the end of .so file names. + # So, the library has to have a name like libtcl75.so.1.0 + + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + SunOS-5.[[0-6]]) + # Careful to not let 5.10+ fall into this case + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + fi + ;; + SunOS-5*) + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, + [Do we really want to follow the standard? Yes we do!]) + + SHLIB_CFLAGS="-KPIC" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + arch=`isainfo` + if test "$arch" = "sparcv9 sparc" ; then + if test "$GCC" = "yes" ; then + if test "`gcc -dumpversion | awk -F. '{print [$]1}'`" -lt "3" ; then + AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) + else + do64bit_ok=yes + CFLAGS="$CFLAGS -m64 -mcpu=v9" + LDFLAGS="$LDFLAGS -m64 -mcpu=v9" + SHLIB_CFLAGS="-fPIC" + fi + else + do64bit_ok=yes + if test "$do64bitVIS" = "yes" ; then + CFLAGS="$CFLAGS -xarch=v9a" + LDFLAGS_ARCH="-xarch=v9a" + else + CFLAGS="$CFLAGS -xarch=v9" + LDFLAGS_ARCH="-xarch=v9" + fi + # Solaris 64 uses this as well + #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" + fi + elif test "$arch" = "amd64 i386" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN([64bit mode not supported with GCC on $system]) + else + do64bit_ok=yes + CFLAGS="$CFLAGS -xarch=amd64" + LDFLAGS="$LDFLAGS -xarch=amd64" + fi + else + AC_MSG_WARN([64bit mode not supported for $arch]) + fi + fi + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} + if test "$do64bit_ok" = "yes" ; then + # We need to specify -static-libgcc or we need to + # add the path to the sparv9 libgcc. + # JH: static-libgcc is necessary for core Tcl, but may + # not be necessary for extensions. + SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" + # for finding sparcv9 libgcc, get the regular libgcc + # path, remove so name and append 'sparcv9' + #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." + #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" + fi + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ + hold_ldflags=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-Bexport" + AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no) + LDFLAGS=$hold_ldflags]) + if test $tcl_cv_ld_Bexport = yes; then + LDFLAGS="$LDFLAGS -Wl,-Bexport" + fi + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + ;; + esac + + if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then + AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) + fi + + # Step 4: disable dynamic loading if requested via a command-line switch. + + AC_ARG_ENABLE(load, + AC_HELP_STRING([--disable-load], + [disallow dynamic loading and "load" command (default: enabled)]), + [tcl_ok=$enableval], [tcl_ok=yes]) + if test "$tcl_ok" = "no"; then + DL_OBJS="" + fi + + if test "x$DL_OBJS" != "x" ; then + BUILD_DLTEST="\$(DLTEST_TARGETS)" + else + echo "Can't figure out how to do dynamic loading or shared libraries" + echo "on this system." + SHLIB_CFLAGS="" + SHLIB_LD="" + SHLIB_SUFFIX="" + DL_OBJS="tclLoadNone.o" + DL_LIBS="" + LDFLAGS="$LDFLAGS_ORIG" + CC_SEARCH_FLAGS="" + LD_SEARCH_FLAGS="" + BUILD_DLTEST="" + fi + LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$DL_OBJS" != "tclLoadNone.o" ; then + if test "$GCC" = "yes" ; then + case $system in + AIX-*) + ;; + BSD/OS*) + ;; + IRIX*) + ;; + NetBSD-*|FreeBSD-*) + ;; + Darwin-*) + ;; + SCO_SV-3.2*) + ;; + windows) + ;; + *) + SHLIB_CFLAGS="-fPIC" + ;; + esac + fi + fi + + if test "$SHARED_LIB_SUFFIX" = "" ; then + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' + fi + if test "$UNSHARED_LIB_SUFFIX" = "" ; then + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' + fi + + AC_SUBST(DL_LIBS) + + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) + + AC_SUBST(STLIB_LD) + AC_SUBST(SHLIB_LD) + + AC_SUBST(SHLIB_LD_LIBS) + AC_SUBST(SHLIB_CFLAGS) + + AC_SUBST(LD_LIBRARY_PATH_VAR) + + # These must be called after we do the basic CFLAGS checks and + # verify any possible 64-bit or similar switches are necessary + TEA_TCL_EARLY_FLAGS + TEA_TCL_64BIT_FLAGS +]) + +#-------------------------------------------------------------------- +# TEA_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives, +# and some build environments have stdin not pointing at a +# pseudo-terminal (usually /dev/null instead.) +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# HAVE_SYS_MODEM_H +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_SERIAL_PORT], [ + AC_CHECK_HEADERS(sys/modem.h) + AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ + AC_TRY_RUN([ +#include <termios.h> + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include <termio.h> + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include <sgtty.h> + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include <termios.h> +#include <errno.h> + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include <termio.h> +#include <errno.h> + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include <sgtty.h> +#include <errno.h> + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi]) + case $tcl_cv_api_serial in + termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; + termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; + sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; + esac +]) + +#-------------------------------------------------------------------- +# TEA_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod insome versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# HAVE_LIMITS_H or NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and +# CHECK on limits.h +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [ + AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, + AC_TRY_LINK([#include <sys/types.h> +#include <dirent.h>], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)) + + if test $tcl_cv_dirent_h = no; then + AC_DEFINE(NO_DIRENT_H, 1, [Do we have <dirent.h>?]) + fi + + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have <errno.h>?])]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have <float.h>?])]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have <values.h>?])]) + AC_CHECK_HEADER(limits.h, + [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have <limits.h>?])], + [AC_DEFINE(NO_LIMITS_H, 1, [Do we have <limits.h>?])]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H, 1, [Do we have <stdlib.h>?]) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H, 1, [Do we have <string.h>?]) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have <sys/wait.h>?])]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have <dlfcn.h>?])]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + AC_HAVE_HEADERS(sys/param.h) +]) + +#-------------------------------------------------------------------- +# TEA_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# This should be called after TEA_CONFIG_CFLAGS as setting the +# LIBS line can confuse some configure macro magic. +# +# Arguments: +# none +# +# Results: +# +# Sets the following vars: +# XINCLUDES +# XLIBSW +# PKG_LIBS (appends to) +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_PATH_X], [ + if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then + TEA_PATH_UNIX_X + fi +]) + +AC_DEFUN([TEA_PATH_UNIX_X], [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Intrinsic.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING([for X11 header files]) + found_xincludes="no" + AC_TRY_CPP([#include <X11/Intrinsic.h>], found_xincludes="yes", found_xincludes="no") + if test "$found_xincludes" = "no"; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Intrinsic.h; then + AC_MSG_RESULT([$i]) + XINCLUDES=" -I$i" + found_xincludes="yes" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES="-I$x_includes" + found_xincludes="yes" + fi + fi + if test found_xincludes = "no"; then + AC_MSG_RESULT([couldn't find any!]) + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING([for X11 libraries]) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then + AC_MSG_RESULT([$i]) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT([could not find any! Using -lX11.]) + XLIBSW=-lX11 + fi + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi +]) + +#-------------------------------------------------------------------- +# TEA_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BLOCKING_STYLE], [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + TEA_CONFIG_SYSTEM + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + case $system in + # There used to be code here to use FIONBIO under AIX. However, it + # was reported that FIONBIO doesn't work under AIX 3.2.5. Since + # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO + # code (JO, 5/31/97). + + OSF*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + SunOS-4*) + AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) + AC_MSG_RESULT([FIONBIO]) + ;; + *) + AC_MSG_RESULT([O_NONBLOCK]) + ;; + esac +]) + +#-------------------------------------------------------------------- +# TEA_TIME_HANLDER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TIME_HANDLER], [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_CHECK_FUNCS(gmtime_r localtime_r) + + AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, + AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;], + tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)) + if test $tcl_cv_member_tm_tzadj = yes ; then + AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) + fi + + AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, + AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;], + tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)) + if test $tcl_cv_member_tm_gmtoff = yes ; then + AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) + fi + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, + AC_TRY_COMPILE([#include <time.h>], + [extern long timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)) + if test $tcl_cv_timezone_long = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + else + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, + AC_TRY_COMPILE([#include <time.h>], + [extern time_t timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)) + if test $tcl_cv_timezone_time = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_BUGGY_STRTOD], [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ + AC_TRY_RUN([ + extern double strtod(); + int main() { + char *infString="Inf", *nanString="NaN", *spaceString=" "; + char *term; + double value; + value = strtod(infString, &term); + if ((term != infString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(nanString, &term); + if ((term != nanString) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, + tcl_cv_strtod_buggy=buggy)]) + if test "$tcl_cv_strtod_buggy" = buggy; then + AC_LIBOBJ([fixstrtod]) + USE_COMPAT=1 + AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS +# LIBS +# MATH_LIBS +# +# Results: +# +# Subst's the following var: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_LINK_LIBS], [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, [ + AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have <net/errno.h>?])]) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # Don't perform the eval of the libraries here because DL_LIBS + # won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) + +#-------------------------------------------------------------------- +# TEA_TCL_EARLY_FLAGS +# +# Check for what flags are needed to be passed so the correct OS +# features are available. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# _ISOC99_SOURCE +# _LARGEFILE64_SOURCE +# _LARGEFILE_SOURCE64 +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_EARLY_FLAG],[ + AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), + AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, + AC_TRY_COMPILE([[#define ]$1[ 1 +]$2], $3, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) + if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then + AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) + tcl_flags="$tcl_flags $1" + fi +]) + +AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ + AC_MSG_CHECKING([for required early compiler flags]) + tcl_flags="" + TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>], + [char *p = (char *)strtoll; char *q = (char *)strtoull;]) + TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>], + [struct stat64 buf; int i = stat64("/", &buf);]) + TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include <sys/stat.h>], + [char *p = (char *)open64;]) + if test "x${tcl_flags}" = "x" ; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([${tcl_flags}]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_64BIT_FLAGS +# +# Check for what is defined in the way of 64-bit features. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# TCL_WIDE_INT_IS_LONG +# TCL_WIDE_INT_TYPE +# HAVE_STRUCT_DIRENT64 +# HAVE_STRUCT_STAT64 +# HAVE_TYPE_OFF64_T +# +#-------------------------------------------------------------------- + +AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ + AC_MSG_CHECKING([for 64-bit integer type]) + AC_CACHE_VAL(tcl_cv_type_64bit,[ + tcl_cv_type_64bit=none + # See if the compiler knows natively about __int64 + AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], + tcl_type_64bit=__int64, tcl_type_64bit="long long") + # See if we should use long anyway Note that we substitute in the + # type that is our current guess for a 64-bit type inside this check + # program, so it should be modified only carefully... + AC_TRY_COMPILE(,[switch (0) { + case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; + }],tcl_cv_type_64bit=${tcl_type_64bit})]) + if test "${tcl_cv_type_64bit}" = none ; then + AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) + AC_MSG_RESULT([using long]) + elif test "${tcl_cv_type_64bit}" = "__int64" \ + -a "${TEA_PLATFORM}" = "windows" ; then + # We actually want to use the default tcl.h checks in this + # case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + AC_MSG_RESULT([using Tcl header defaults]) + else + AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, + [What type should be used to define wide integers?]) + AC_MSG_RESULT([${tcl_cv_type_64bit}]) + + # Now check for auxiliary declarations + AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ + AC_TRY_COMPILE([#include <sys/types.h> +#include <sys/dirent.h>],[struct dirent64 p;], + tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in <sys/types.h>?]) + fi + + AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ + AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p; +], + tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in <sys/stat.h>?]) + fi + + AC_CHECK_FUNCS(open64 lseek64) + AC_MSG_CHECKING([for off64_t]) + AC_CACHE_VAL(tcl_cv_type_off64_t,[ + AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset; +], + tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) + dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the + dnl functions lseek64 and open64 are defined. + if test "x${tcl_cv_type_off64_t}" = "xyes" && \ + test "x${ac_cv_func_lseek64}" = "xyes" && \ + test "x${ac_cv_func_open64}" = "xyes" ; then + AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in <sys/types.h>?]) + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + fi +]) + +## +## Here ends the standard Tcl configuration bits and starts the +## TEA specific functions +## + +#------------------------------------------------------------------------ +# TEA_INIT -- +# +# Init various Tcl Extension Architecture (TEA) variables. +# This should be the first called TEA_* macro. +# +# Arguments: +# none +# +# Results: +# +# Defines and substs the following vars: +# CYGPATH +# EXEEXT +# Defines only: +# TEA_VERSION +# TEA_INITED +# TEA_PLATFORM (windows or unix) +# +# "cygpath" is used on windows to generate native path names for include +# files. These variables should only be used with the compiler and linker +# since they generate native path names. +# +# EXEEXT +# Select the executable extension based on the host type. This +# is a lightweight replacement for AC_EXEEXT that doesn't require +# a compiler. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_INIT], [ + # TEA extensions pass this us the version of TEA they think they + # are compatible with. + TEA_VERSION="3.5" + + AC_MSG_CHECKING([for correct TEA configuration]) + if test x"${PACKAGE_NAME}" = x ; then + AC_MSG_ERROR([ +The PACKAGE_NAME variable must be defined by your TEA configure.in]) + fi + if test x"$1" = x ; then + AC_MSG_ERROR([ +TEA version not specified.]) + elif test "$1" != "${TEA_VERSION}" ; then + AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) + else + AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) + fi + case "`uname -s`" in + *win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*) + AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + CYGPATH=echo + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix. + # Note when adjusted, so that TEA_PREFIX can correct for this. + # This is needed for recursive configures, since autoconf propagates + # $prefix, but not $exec_prefix (doh!). + if test x$exec_prefix = xNONE ; then + exec_prefix_default=yes + exec_prefix=$prefix + fi + + AC_SUBST(EXEEXT) + AC_SUBST(CYGPATH) + + # This package name must be replaced statically for AC_SUBST to work + AC_SUBST(PKG_LIB_FILE) + # Substitute STUB_LIB_FILE in case package creates a stub library too. + AC_SUBST(PKG_STUB_LIB_FILE) + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) + AC_SUBST(PKG_TCL_SOURCES) + AC_SUBST(PKG_HEADERS) + AC_SUBST(PKG_INCLUDES) + AC_SUBST(PKG_LIBS) + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_SOURCES +# PKG_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_SOURCES], [ + vars="$@" + for i in $vars; do + case $i in + [\$]*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + AC_MSG_ERROR([could not find source file '$i']) + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + AC_SUBST(PKG_SOURCES) + AC_SUBST(PKG_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_STUB_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_STUB_SOURCES +# PKG_STUB_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_STUB_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + AC_MSG_ERROR([could not find stub source file '$i']) + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_TCL_SOURCES -- +# +# Specify one or more Tcl source files. These should be platform +# independent runtime files. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_TCL_SOURCES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_TCL_SOURCES], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + AC_SUBST(PKG_TCL_SOURCES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_HEADERS -- +# +# Specify one or more source headers. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_HEADERS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_HEADERS], [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find header file '${srcdir}/$i']) + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + AC_SUBST(PKG_HEADERS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_INCLUDES -- +# +# Specify one or more include dirs. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_INCLUDES +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_INCLUDES], [ + vars="$@" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + AC_SUBST(PKG_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_LIBS -- +# +# Specify one or more libraries. Users should check for +# the right platform before adding to their list. For Windows, +# libraries provided in "foo.lib" format will be converted to +# "-lfoo" when using GCC (mingw). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_LIBS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_LIBS], [ + vars="$@" + for i in $vars; do + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then + # Convert foo.lib to -lfoo for GCC. No-op if not *.lib + i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` + fi + PKG_LIBS="$PKG_LIBS $i" + done + AC_SUBST(PKG_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CFLAGS -- +# +# Specify one or more CFLAGS. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_CFLAGS +#------------------------------------------------------------------------ +AC_DEFUN([TEA_ADD_CFLAGS], [ + PKG_CFLAGS="$PKG_CFLAGS $@" + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_PREFIX -- +# +# Handle the --prefix=... option by defaulting to what Tcl gave +# +# Arguments: +# none +# +# Results: +# +# If --prefix or --exec-prefix was not specified, $prefix and +# $exec_prefix will be set to the values given to Tcl when it was +# configured. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_PREFIX], [ + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) + prefix=${TCL_PREFIX} + else + AC_MSG_NOTICE([--prefix defaulting to /usr/local]) + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ + -o x"${exec_prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) + exec_prefix=${TCL_EXEC_PREFIX} + else + AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) + exec_prefix=$prefix + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER_CC -- +# +# Do compiler checks the way we want. This is just a replacement +# for AC_PROG_CC in TEA configure.in files to make them cleaner. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER_CC], [ + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + # If the user did not set CFLAGS, set it now to keep + # the AC_PROG_CC macro from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + AC_PROG_CC + AC_PROG_CPP + + AC_PROG_INSTALL + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + AC_PROG_MAKE_SET + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + AC_PROG_LIBTOOL + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + AC_OBJEXT + AC_EXEEXT +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER -- +# +# Do compiler checks that use the compiler. This must go after +# TEA_SETUP_COMPILER_CC, which does the actual compiler check. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN([TEA_SETUP_COMPILER], [ + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + AC_REQUIRE([TEA_SETUP_COMPILER_CC]) + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + AC_MSG_CHECKING([if the compiler understands -pipe]) + OLDCC="$CC" + CC="$CC -pipe" + AC_TRY_COMPILE(,, AC_MSG_RESULT([yes]), CC="$OLDCC" + AC_MSG_RESULT([no])) + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + AC_C_BIGENDIAN + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_TCL_LINK_LIBS + TEA_MISSING_POSIX_HEADERS + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi +]) + +#------------------------------------------------------------------------ +# TEA_MAKE_LIB -- +# +# Generate a line that can be used to build a shared/unshared library +# in a platform independent manner. +# +# Arguments: +# none +# +# Requires: +# +# Results: +# +# Defines the following vars: +# CFLAGS - Done late here to note disturb other AC macros +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# MAKE_SHARED_LIB Makefile rule for building a shared library +# MAKE_STATIC_LIB Makefile rule for building a static library +# MAKE_STUB_LIB Makefile rule for building a stub library +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_MAKE_LIB], [ + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure any variables in the suffix is + # substituted. (@@@ Might not be necessary anymore) + #-------------------------------------------------------------------- + + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + if test "$GCC" = "yes"; then + PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} + fi + # These aren't needed on Windows (either MSVC or gcc) + RANLIB=: + RANLIB_STUB=: + else + RANLIB_STUB="${RANLIB}" + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build their own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + AC_SUBST(MAKE_LIB) + AC_SUBST(MAKE_SHARED_LIB) + AC_SUBST(MAKE_STATIC_LIB) + AC_SUBST(MAKE_STUB_LIB) + AC_SUBST(RANLIB_STUB) +]) + +#------------------------------------------------------------------------ +# TEA_LIB_SPEC -- +# +# Compute the name of an existing object library located in libdir +# from the given base name and produce the appropriate linker flags. +# +# Arguments: +# basename The base name of the library without version +# numbers, extensions, or "lib" prefixes. +# extra_dir Extra directory in which to search for the +# library. This location is used first, then +# $prefix/$exec-prefix, then some defaults. +# +# Requires: +# TEA_INIT and TEA_PREFIX must be called first. +# +# Results: +# +# Defines the following vars: +# ${basename}_LIB_NAME The computed library name. +# ${basename}_LIB_SPEC The computed linker flags. +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LIB_SPEC], [ + AC_MSG_CHECKING([for $1 library]) + + # Look in exec-prefix for the library (defined by TEA_PREFIX). + + tea_lib_name_dir="${exec_prefix}/lib" + + # Or in a user-specified location. + + if test x"$2" != x ; then + tea_extra_lib_dir=$2 + else + tea_extra_lib_dir=NONE + fi + + for i in \ + `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do + if test -f "$i" ; then + tea_lib_name_dir=`dirname $i` + $1_LIB_NAME=`basename $i` + $1_LIB_PATH_NAME=$i + break + fi + done + + if test "${TEA_PLATFORM}" = "windows"; then + $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" + else + # Strip off the leading "lib" and trailing ".a" or ".so" + + tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` + $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" + fi + + if test "x${$1_LIB_NAME}" = x ; then + AC_MSG_ERROR([not found]) + else + AC_MSG_RESULT([${$1_LIB_SPEC}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TCL_HEADERS -- +# +# Locate the private Tcl include files +# +# Arguments: +# +# Requires: +# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has +# already been called. +# +# Results: +# +# Substs the following vars: +# TCL_TOP_DIR_NATIVE +# TCL_GENERIC_DIR_NATIVE +# TCL_UNIX_DIR_NATIVE +# TCL_WIN_DIR_NATIVE +# TCL_BMAP_DIR_NATIVE +# TCL_TOOL_DIR_NATIVE +# TCL_PLATFORM_DIR_NATIVE +# TCL_BIN_DIR_NATIVE +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ + AC_MSG_CHECKING([for Tcl private include files]) + + TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` + TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" + TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" + TCL_UNIX_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" + TCL_WIN_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" + TCL_BMAP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/bitmaps\" + TCL_TOOL_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/tools\" + TCL_COMPAT_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/compat\" + + if test "${TEA_PLATFORM}" = "windows"; then + TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE} + else + TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE} + fi + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + if test -d "${TCL_BIN_DIR}/Headers" -a -d "${TCL_BIN_DIR}/PrivateHeaders"; then + TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}"; else + TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"; fi + ;; + esac + fi + + AC_SUBST(TCL_TOP_DIR_NATIVE) + AC_SUBST(TCL_GENERIC_DIR_NATIVE) + AC_SUBST(TCL_UNIX_DIR_NATIVE) + AC_SUBST(TCL_WIN_DIR_NATIVE) + AC_SUBST(TCL_BMAP_DIR_NATIVE) + AC_SUBST(TCL_TOOL_DIR_NATIVE) + AC_SUBST(TCL_PLATFORM_DIR_NATIVE) + + AC_SUBST(TCL_INCLUDES) + AC_MSG_RESULT([Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TCL_HEADERS -- +# +# Locate the installed public Tcl header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tclinclude switch to configure. +# Result is cached. +# +# Substs the following vars: +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ + AC_MSG_CHECKING([for Tcl public headers]) + + AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tclh, [ + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) + fi + else + if test "`uname -s`" = "Darwin"; then + # If Tcl was built as a framework, attempt to use + # the framework's Headers directory + case ${TCL_DEFS} in + *TCL_FRAMEWORK*) + list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tcl is not installed, + # and in that situation, look there before installed locations. + if test -f "${TCL_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + if test x"${TCL_INCLUDE_SPEC}" != x ; then + d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` + list="$list `ls -d ${d} 2>/dev/null`" + fi + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tclh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TCL_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TK_HEADERS -- +# +# Locate the private Tk include files +# +# Arguments: +# +# Requires: +# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has +# already been called. +# +# Results: +# +# Substs the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ + AC_MSG_CHECKING([for Tk private include files]) + + TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` + TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" + TK_UNIX_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" + TK_WIN_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" + TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" + TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" + if test "${TEA_PLATFORM}" = "windows"; then + TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE} + else + TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE} + fi + # We want to ensure these are substituted so as not to require + # any *_NATIVE vars be defined in the Makefile + TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" + if test "${TEA_WINDOWINGSYSTEM}" = "win32" \ + -o "${TEA_WINDOWINGSYSTEM}" = "aqua"; then + TK_INCLUDES="${TK_INCLUDES} -I${TK_XLIB_DIR_NATIVE}" + fi + if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then + TK_INCLUDES="${TK_INCLUDES} -I${TK_SRC_DIR_NATIVE}/macosx" + fi + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers and PrivateHeaders directories + case ${TK_DEFS} in + *TK_FRAMEWORK*) + if test -d "${TK_BIN_DIR}/Headers" -a -d "${TK_BIN_DIR}/PrivateHeaders"; then + TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}"; fi + ;; + esac + fi + + AC_SUBST(TK_TOP_DIR_NATIVE) + AC_SUBST(TK_UNIX_DIR_NATIVE) + AC_SUBST(TK_WIN_DIR_NATIVE) + AC_SUBST(TK_GENERIC_DIR_NATIVE) + AC_SUBST(TK_XLIB_DIR_NATIVE) + AC_SUBST(TK_PLATFORM_DIR_NATIVE) + + AC_SUBST(TK_INCLUDES) + AC_MSG_RESULT([Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TK_HEADERS -- +# +# Locate the installed public Tk header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tkinclude switch to configure. +# Result is cached. +# +# Substs the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ + AC_MSG_CHECKING([for Tk public headers]) + + AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tkh, [ + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) + fi + else + if test "`uname -s`" = "Darwin"; then + # If Tk was built as a framework, attempt to use + # the framework's Headers directory. + case ${TK_DEFS} in + *TK_FRAMEWORK*) + list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" + ;; + esac + fi + + # Look in the source dir only if Tk is not installed, + # and in that situation, look there before installed locations. + if test -f "${TK_BIN_DIR}/Makefile" ; then + list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + fi + + # Check order: pkg --prefix location, Tk's --prefix location, + # relative to directory of tkConfig.sh, Tcl's --prefix location, + # relative to directory of tclConfig.sh. + + eval "temp_includedir=${includedir}" + list="$list \ + `ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tkh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TK_INCLUDES) + + if test "${TEA_WINDOWINGSYSTEM}" = "win32" \ + -o "${TEA_WINDOWINGSYSTEM}" = "aqua"; then + # On Windows and Aqua, we need the X compat headers + AC_MSG_CHECKING([for X11 header files]) + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + AC_SUBST(TK_XINCLUDES) + fi + AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PROG_TCLSH +# Determine the fully qualified path name of the tclsh executable +# in the Tcl build directory or the tclsh installed in a bin +# directory. This macro will correctly determine the name +# of the tclsh executable even if tclsh has not yet been +# built in the build directory. The tclsh found is always +# associated with a tclConfig.sh file. This tclsh should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments +# none +# +# Results +# Subst's the following values: +# TCLSH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_TCLSH], [ + AC_MSG_CHECKING([for tclsh]) + if test -f "${TCL_BIN_DIR}/Makefile" ; then + # tclConfig.sh is in Tcl build directory + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="${TCL_BIN_DIR}/tclsh" + fi + else + # tclConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" + else + TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" + fi + list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${TCLSH_PROG}" ; then + REAL_TCL_BIN_DIR="`cd "$i"; pwd`" + break + fi + done + TCLSH_PROG="${REAL_TCL_BIN_DIR}/${TCLSH_PROG}" + fi + AC_MSG_RESULT([${TCLSH_PROG}]) + AC_SUBST(TCLSH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_WISH +# Determine the fully qualified path name of the wish executable +# in the Tk build directory or the wish installed in a bin +# directory. This macro will correctly determine the name +# of the wish executable even if wish has not yet been +# built in the build directory. The wish found is always +# associated with a tkConfig.sh file. This wish should be used +# only for running extension test cases. It should never be +# or generation of files (like pkgIndex.tcl) at build time. +# +# Arguments +# none +# +# Results +# Subst's the following values: +# WISH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PROG_WISH], [ + AC_MSG_CHECKING([for wish]) + if test -f "${TK_BIN_DIR}/Makefile" ; then + # tkConfig.sh is in Tk build directory + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="${TK_BIN_DIR}/wish" + fi + else + # tkConfig.sh is in install location + if test "${TEA_PLATFORM}" = "windows"; then + WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" + else + WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" + fi + list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ + `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ + `ls -d ${TK_PREFIX}/bin 2>/dev/null`" + for i in $list ; do + if test -f "$i/${WISH_PROG}" ; then + REAL_TK_BIN_DIR="`cd "$i"; pwd`" + break + fi + done + WISH_PROG="${REAL_TK_BIN_DIR}/${WISH_PROG}" + fi + AC_MSG_RESULT([${WISH_PROG}]) + AC_SUBST(WISH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CONFIG -- +# +# Locate the ${1}Config.sh file and perform a sanity check on +# the ${1} compile flags. These are used by packages like +# [incr Tk] that load *Config.sh files from more than Tcl and Tk. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-$1=... +# +# Defines the following vars: +# $1_BIN_DIR Full path to the directory containing +# the $1Config.sh file +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CONFIG], [ + # + # Ok, lets find the $1 configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-$1 + # + + if test x"${no_$1}" = x ; then + # we reset no_$1 in case something fails here + no_$1=true + AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) + AC_MSG_CHECKING([for $1 configuration]) + AC_CACHE_VAL(ac_cv_c_$1config,[ + + # First check to see if --with-$1 was specified. + if test x"${with_$1config}" != x ; then + case ${with_$1config} in + */$1Config.sh ) + if test -f ${with_$1config}; then + AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) + with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` + fi;; + esac + if test -f "${with_$1config}/$1Config.sh" ; then + ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` + else + AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) + fi + fi + + # then check for a private $1 installation + if test x"${ac_cv_c_$1config}" = x ; then + for i in \ + ../$1 \ + `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../$1 \ + `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ../../../$1 \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ${srcdir}/../$1 \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ + `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_$1config}" = x ; then + for i in `ls -d ${libdir} 2>/dev/null` \ + `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib64 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_$1config}" = x ; then + $1_BIN_DIR="# no $1 configs found" + AC_MSG_WARN([Cannot find $1 configuration definitions]) + exit 0 + else + no_$1= + $1_BIN_DIR=${ac_cv_c_$1config} + AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG -- +# +# Load the $1Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1_BIN_DIR +# +# Results: +# +# Subst the following vars: +# $1_SRC_DIR +# $1_LIB_FILE +# $1_LIB_SPEC +# +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_LOAD_CONFIG], [ + AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) + + if test -f "${$1_BIN_DIR}/$1Config.sh" ; then + AC_MSG_RESULT([loading]) + . ${$1_BIN_DIR}/$1Config.sh + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the $1_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable $1_LIB_SPEC will be set to the value + # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC + # instead of $1_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f ${$1_BIN_DIR}/Makefile ; then + AC_MSG_WARN([Found Makefile - using build library specs for $1]) + $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} + $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} + $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} + fi + + AC_SUBST($1_VERSION) + AC_SUBST($1_BIN_DIR) + AC_SUBST($1_SRC_DIR) + + AC_SUBST($1_LIB_FILE) + AC_SUBST($1_LIB_SPEC) + + AC_SUBST($1_STUB_LIB_FILE) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_PATH) +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CELIB -- +# +# Locate Keuchel's celib emulation layer for targeting Win/CE +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-celib=... +# +# Defines the following vars: +# CELIB_DIR Full path to the directory containing +# the include and platform lib files +#------------------------------------------------------------------------ + +AC_DEFUN([TEA_PATH_CELIB], [ + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) + AC_MSG_CHECKING([for Windows/CE celib directory]) + AC_CACHE_VAL(ac_cv_c_celibconfig,[ + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_celibconfig}" = x ; then + AC_MSG_ERROR([Cannot find celib support library directory]) + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` + AC_MSG_RESULT([found $CELIB_DIR]) + fi + fi +]) + + +# Local Variables: +# mode: autoconf +# End: |