ruby.git - Ruby GIT repository

	Commit message (Expand)	Author	Age	Files	Lines
*	* lib/irb/ruby-lex.rb, lib/irb/ruby-token.rb: support %s-notation for irb.	keiju	2003-08-05	1	-0/+1
*	* irb 0.9	keiju	2002-07-09	1	-1/+2
*	* lib/matrix.rb: resolve 'ruby -w' warnings.	keiju	2001-06-27	1	-1/+1
*	Merge from irb 0.7.3.	knu	2001-04-30	1	-4/+9
*	2000-05-12	matz	2000-05-12	1	-0/+266

/* * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * config for XPedite1000 from XES Inc. * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com> * (C) Copyright 2003 Sandburst Corporation * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony) */ #ifndef __CONFIG_H #define __CONFIG_H /* High Level Configuration Options */ #define CONFIG_XPEDITE1000 1 #define CONFIG_SYS_BOARD_NAME "XPedite1000" #define CONFIG_4xx 1 /* ... PPC4xx family */ #define CONFIG_440 1 #define CONFIG_440GX 1 /* 440 GX */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ /* * DDR config */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */ #define CONFIG_VERY_BIG_RAM 1 /* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */ #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ #define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) #define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) /* * Diagnostics */ #define CONFIG_SYS_ALT_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x0400000 #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* POST support */ #define CONFIG_POST (CONFIG_SYS_POST_RTC | \ CONFIG_SYS_POST_I2C) /* * LED support */ #define USR_LED0 0x00000080 #define USR_LED1 0x00000100 #define USR_LED2 0x00000200 #define USR_LED3 0x00000400 #ifndef __ASSEMBLY__ extern unsigned long in32(unsigned int); extern void out32(unsigned int, unsigned long); #define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0)) #define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1)) #define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2)) #define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3)) #define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0)) #define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1)) #define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2)) #define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3)) #endif /* * Use internal SRAM for initial stack */ #define CONFIG_SYS_TEMP_STACK_OCM 1 #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ #define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* * Serial Port */ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400} #define CONFIG_BAUDRATE 115200 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ /* * Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " /* * NOR flash configuration */ #define CONFIG_SYS_MAX_FLASH_BANKS 3 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 } #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_QUIET_TEST /* MirrorBit flashes are optional */ #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ /* * I2C */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7f #define CONFIG_I2C_MULTI_BUS /* I2C EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* I2C RTC: STMicro M41T00 */ #define CONFIG_RTC_M41T11 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 #define CONFIG_SYS_M41T11_BASE_YEAR 2000 /* * PCI */ /* General PCI */ #define CONFIG_PCI /* include pci support */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ /* Board-specific PCI */ #define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ #define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */ /* * Networking options */ #define CONFIG_PPC4xx_EMAC #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_NET_MULTI 1 #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ #define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ #define CONFIG_ETHPRIME "ppc_4xx_eth2" #define CONFIG_PHY_ADDR 4 /* PHY address phy0 not populated */ #define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */ #define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ #define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */ #define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */ /* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME /* * Command configuration */ #include <config_cmd_default.h> #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF #define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_NET #define CONFIG_CMD_PCI #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SNTP /* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ #define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * Boot Flags */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ /* * Environment Configuration */ #define CONFIG_ENV_IS_IN_FLASH 1 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */ #define CONFIG_ENV_SIZE 0x8000 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024)) /* * Flash memory map: * fff80000 - ffffffff U-Boot (512 KB) * fff40000 - fff7ffff U-Boot Environment (256 KB) * fff00000 - fff3ffff FDT (256KB) * ffc00000 - ffefffff OS image (3MB) * ff000000 - ffbfffff OS Use/Filesystem (12MB) */ #define CONFIG_UBOOT_ENV_ADDR MK_STR(TEXT_BASE) #define CONFIG_FDT_ENV_ADDR MK_STR(0xfff00000) #define CONFIG_OS_ENV_ADDR MK_STR(0xffc00000) #define CONFIG_PROG_UBOOT \ "$download_cmd $loadaddr $ubootfile; " \ "if test $? -eq 0; then " \ "protect off "CONFIG_UBOOT_ENV_ADDR" +80000; " \ "erase "CONFIG_UBOOT_ENV_ADDR" +80000; " \ "cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; " \ "protect on "CONFIG_UBOOT_ENV_ADDR" +80000; " \ "cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; " \ "if test $? -ne 0; then " \ "echo PROGRAM FAILED; " \ "else; " \ "echo PROGRAM SUCCEEDED; " \ "fi; " \ "else; " \ "echo DOWNLOAD FAILED; " \ "fi;" #define CONFIG_BOOT_OS_NET \ "$download_cmd $osaddr $osfile; " \ "if test $? -eq 0; then " \ "if test -n $fdtaddr; then " \ "$download_cmd $fdtaddr $fdtfile; " \ "if test $? -eq 0; then " \ "bootm $osaddr - $fdtaddr; " \ "else; " \ "echo FDT DOWNLOAD FAILED; " \ "fi; " \ "else; " \ "bootm $osaddr; " \ "fi; " \ "else; " \ "echo OS DOWNLOAD FAILED; " \ "fi;" #define CONFIG_PROG_OS \ "$download_cmd $osaddr $osfile; " \ "if test $? -eq 0; then " \ "erase "CONFIG_OS_ENV_ADDR" +$filesize; " \ "cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \ "cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \ "if test $? -ne 0; then " \ "echo OS PROGRAM FAILED; " \ "else; " \ "echo OS PROGRAM SUCCEEDED; " \ "fi; " \ "else; " \ "echo OS DOWNLOAD FAILED; " \ "fi;" #define CONFIG_PROG_FDT \ "$download_cmd $fdtaddr $fdtfile; " \ "if test $? -eq 0; then " \ "erase "CONFIG_FDT_ENV_ADDR" +$filesize;" \ "cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \ "cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \ "if test $? -ne 0; then " \ "echo FDT PROGRAM FAILED; " \ "else; " \ "echo FDT PROGRAM SUCCEEDED; " \ "fi; " \ "else; " \ "echo FDT DOWNLOAD FAILED; " \ "fi;" #define CONFIG_EXTRA_ENV_SETTINGS \ "autoload=yes\0" \ "download_cmd=tftp\0" \ "console_args=console=ttyS0,115200\0" \ "root_args=root=/dev/nfs rw\0" \ "misc_args=ip=on\0" \ "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ "bootfile=/home/user/file\0" \ "osfile=/home/user/uImage-XPedite1000\0" \ "fdtfile=/home/user/xpedite1000.dtb\0" \ "ubootfile=/home/user/u-boot.bin\0" \ "fdtaddr=c00000\0" \ "osaddr=0x1000000\0" \ "loadaddr=0x1000000\0" \ "prog_uboot="CONFIG_PROG_UBOOT"\0" \ "prog_os="CONFIG_PROG_OS"\0" \ "prog_fdt="CONFIG_PROG_FDT"\0" \ "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ "bootcmd_flash=run set_bootargs; " \ "bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0" \ "bootcmd=run bootcmd_flash\0" #endif /* __CONFIG_H */