ruby.git - Ruby GIT repository

diff options

author	eban <eban@b2dd03c8-39d4-4d8f-98ff-823fe69b080e>	2005-11-06 15:12:40 +0000
committer	eban <eban@b2dd03c8-39d4-4d8f-98ff-823fe69b080e>	2005-11-06 15:12:40 +0000
commit	e764dd2ee0597d218c02650cf11bdbcc5329c262 (patch)
tree	734c55808b821f0fcdfb9bdf38bbb7f9efdfccb0 /test/fileutils/fileasserts.rb
parent	b9926798671d1d0998dab65f98f519749f831cc8 (diff)
download	ruby-e764dd2ee0597d218c02650cf11bdbcc5329c262.tar.gz ruby-e764dd2ee0597d218c02650cf11bdbcc5329c262.tar.xz ruby-e764dd2ee0597d218c02650cf11bdbcc5329c262.zip

* 2005-11-07

git-svn-id: http://svn.ruby-lang.org/repos/ruby/branches/ruby_1_8@9511 b2dd03c8-39d4-4d8f-98ff-823fe69b080e

Diffstat (limited to 'test/fileutils/fileasserts.rb')

0 files changed, 0 insertions, 0 deletions

/* * (C) Copyright 2011 Freescale Semiconductor, Inc. * Author: Fabio Estevam <fabio.estevam@freescale.com> * * Based on m28evk.h: * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> * on behalf of DENX Software Engineering GmbH * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIGS_MX28EVK_H__ #define __CONFIGS_MX28EVK_H__ /* System configurations */ #define CONFIG_MX28 /* i.MX28 SoC */ #define CONFIG_MACH_TYPE MACH_TYPE_MX28EVK /* U-Boot Commands */ #define CONFIG_CMD_DATE #define CONFIG_CMD_NAND #define CONFIG_CMD_NAND_TRIMFFS /* Memory configuration */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Environment */ #ifndef CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE (16 * 1024) #else #define CONFIG_ENV_SIZE (4 * 1024) #endif #define CONFIG_ENV_OVERWRITE /* Environment is in MMC */ #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_ENV_OFFSET (256 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 #endif /* Environment is in NAND */ #if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND) #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE #define CONFIG_ENV_SECT_SIZE (128 * 1024) #define CONFIG_ENV_RANGE (512 * 1024) #define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_OFFSET_REDUND \ (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) #endif /* Environemnt is in SPI flash */ #if defined(CONFIG_CMD_SF) && defined(CONFIG_ENV_IS_IN_SPI_FLASH) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_OFFSET 0x40000 /* 256K */ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) #define CONFIG_ENV_SECT_SIZE 0x1000 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_BUS 2 #define CONFIG_ENV_SPI_MAX_HZ 24000000 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 #endif /* UBI and NAND partitioning */ #ifdef CONFIG_CMD_NAND #define CONFIG_CMD_UBIFS #define CONFIG_CMD_MTDPARTS #define CONFIG_RBTREE #define CONFIG_LZO #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nand0=gpmi-nand" #define MTDPARTS_DEFAULT \ "mtdparts=gpmi-nand:" \ "3m(bootloader)ro," \ "512k(environment)," \ "512k(redundant-environment)," \ "4m(kernel)," \ "512k(fdt)," \ "8m(ramdisk)," \ "-(filesystem)" #endif /* FEC Ethernet on SoC */ #ifdef CONFIG_CMD_NET #define CONFIG_FEC_MXC #define CONFIG_MX28_FEC_MAC_IN_OCOTP #endif /* RTC */ #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_MXS #endif /* USB */ #ifdef CONFIG_CMD_USB #define CONFIG_EHCI_MXS_PORT1 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_USB_ETHER_SMSC95XX #endif /* SPI */ #ifdef CONFIG_CMD_SPI #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 /* SPI Flash */ #ifdef CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 2 #define CONFIG_SF_DEFAULT_CS 0 /* this may vary and depends on the installed chip */ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 24000000 #endif #endif /* Framebuffer support */ #ifdef CONFIG_VIDEO #define CONFIG_VIDEO_LOGO #define CONFIG_SPLASH_SCREEN #define CONFIG_CMD_BMP #define CONFIG_BMP_16BPP #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) #endif /* Boot Linux */ #define CONFIG_BOOTFILE "uImage" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* Extra Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ "ubifs_file=filesystem.ubifs\0" \ "update_nand_full_filename=u-boot.nand\0" \ "update_nand_firmware_filename=u-boot.sb\0" \ "update_nand_firmware_maxsz=0x100000\0" \ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \ "nand device 0 ; " \ "nand info ; " \ "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ "update_nand_firmware_full=" /* Update FCB, DBBT and FW */ \ "if tftp ${update_nand_full_filename} ; then " \ "run update_nand_get_fcb_size ; " \ "nand scrub -y 0x0 ${filesize} ; " \ "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \ "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ "fi\0" \ "update_nand_firmware=" /* Update only firmware */ \ "if tftp ${update_nand_firmware_filename} ; then " \ "run update_nand_get_fcb_size ; " \ "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \ "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \ "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \ "nand erase ${fcb_sz} ${fw_sz} ; " \ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ "fi\0" \ "update_nand_kernel=" /* Update kernel */ \ "mtdparts default; " \ "nand erase.part kernel; " \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ "else " \ "setenv get_cmd tftp; " \ "fi; " \ "${get_cmd} ${image}; " \ "nand write ${loadaddr} kernel ${filesize}\0" \ "update_nand_fdt=" /* Update fdt */ \ "mtdparts default; " \ "nand erase.part fdt; " \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ "else " \ "setenv get_cmd tftp; " \ "fi; " \ "${get_cmd} ${fdt_file}; " \ "nand write ${loadaddr} fdt ${filesize}\0" \ "update_nand_filesystem=" /* Update filesystem */ \ "mtdparts default; " \ "nand erase.part filesystem; " \ "if test ${ip_dyn} = yes; then " \ "setenv get_cmd dhcp; " \ "else " \ "setenv get_cmd tftp; " \ "fi; " \ "${get_cmd} ${ubifs_file}; " \ "ubi part filesystem; " \ "ubi create filesystem; " \ "ubi write ${loadaddr} filesystem ${filesize}\0" \ "nandargs=setenv bootargs console=${console_mainline},${baudrate} " \ "rootfstype=ubifs ubi.mtd=6 root=ubi0_0 ${mtdparts}\0" \ "nandboot=" /* Boot from NAND */ \ "mtdparts default; " \ "run nandargs; " \ "nand read ${loadaddr} kernel 0x00400000; " \ "if test ${boot_fdt} = yes; then " \ "nand read ${fdt_addr} fdt 0x00080000; " \ "bootz ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = no; then " \ "bootz; " \ "else " \ "echo \"ERROR: Set boot_fdt to yes or no.\"; " \ "fi; " \ "fi\0" \ "update_sd_firmware_filename=u-boot.sd\0" \ "update_sd_firmware=" /* Update the SD firmware partition */ \ "if mmc rescan ; then " \ "if tftp ${update_sd_firmware_filename} ; then " \ "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ "setexpr fw_sz ${fw_sz} + 1 ; " \ "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ "fi ; " \ "fi\0" \ "script=boot.scr\0" \ "image=zImage\0" \ "console_fsl=ttyAM0\0" \ "console_mainline=ttyAMA0\0" \ "fdt_file=imx28-evk.dtb\0" \ "fdt_addr=0x41000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ "mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ "if run loadfdt; then " \ "bootz ${loadaddr} - ${fdt_addr}; " \ "else " \ "if test ${boot_fdt} = try; then " \ "bootz; " \ "else " \ "echo WARN: Cannot load the DT; " \ "fi; " \ "fi; " \ "else " \ "bootz; " \ "fi;\0" \


context:
space:
mode: