Imported from rancid-2.3.rc1.tar.gz.rancid-2.3.rc1

4 files changed, 699 insertions, 0 deletions

diff --git a/etc/Makefile.am b/etc/Makefile.am
new file mode 100644
index 0000000..e44e781
--- /dev/null
+++ b/etc/Makefile.am
@@ -0,0 +1,77 @@
+## Process this file with automake to produce Makefile.in
+## A Makefile.in is supplied, in case you do not have automake.
+
+## $Id: Makefile.am,v 1.10 2004/01/11 03:43:50 heas Exp $
+##
+## Copyright (C) 1997-2004 by Terrapin Communications, Inc.
+## All rights reserved.
+##
+## This software may be freely copied, modified and redistributed
+## without fee for non-commerical purposes provided that this license
+## remains intact and unmodified with any RANCID distribution.
+##
+## There is no warranty or other guarantee of fitness of this software.
+## It is provided solely "as is".  The author(s) disclaim(s) all
+## responsibility and liability with respect to this software's usage
+## or its effect upon hardware, computer systems, other software, or
+## anything else.
+##
+## Except where noted otherwise, rancid was written by and is maintained by
+## Henry Kilmer, John Heasley, Andrew Partan, Pete Whiting, and Austin Schutz.
+##
+
+#AUTOMAKE_OPTIONS=foreign no-dependencies
+AUTOMAKE_OPTIONS=foreign
+
+pkgdata_DATA= lg.conf.sample rancid.conf.sample
+EXTRA_DIST= $(pkgdata_DATA:%=%.in)
+
+CLEANFILES= $(pkgdata_DATA)
+
+install-data-local: all
+	@if test -f $(sysconfdir)/rancid.conf ; then \
+	    echo ""; \
+	    echo "WARNING: *** $(sysconfdir)/rancid.conf exists.  See "; \
+	    echo "         *** $(pkgdatadir)/rancid.conf.sample for new"; \
+	    echo "         *** examples."; \
+	    echo ""; \
+	else \
+	    $(INSTALL_DATA) rancid.conf.sample $(sysconfdir)/rancid.conf; \
+	fi; \
+	if test -f $(sysconfdir)/lg.conf ; then \
+	    echo ""; \
+	    echo "WARNING: *** $(sysconfdir)/lg.conf exists.  See "; \
+	    echo "         *** $(pkgdatadir)/lg.conf.sample for new"; \
+	    echo "         *** examples."; \
+	    echo ""; \
+	else \
+	    $(INSTALL_DATA) lg.conf.sample $(sysconfdir)/lg.conf; \
+	fi;
+
+#clean:
+#	rm -f Makefile rancid.conf $(BIN_DATAS) $(BIN_PROGS)
+
+# auto_edit does the autoconf variable substitution.  This allows the
+# substitution to have the full expansion of the variables, e.g.: $sysconfdir
+# will be /prefix/etc instead of ${prefix}/etc.
+#
+# This is a bit of a PITA, but is the method recommended by the autoconf
+# documentation.
+auto_edit = sed \
+	-e 's,@bindir\@,$(bindir),g' \
+	-e 's,@prefix\@,$(prefix),g' \
+	-e 's,@localstatedir\@,$(localstatedir),g' \
+	-e 's,@sysconfdir\@,$(sysconfdir),g' \
+	-e 's,@EXPECT_PATH\@,$(EXPECT_PATH),g' \
+	-e 's,@PERLV_PATH\@,$(PERLV_PATH),g' \
+	-e 's,@ENV_PATH\@,$(ENV_PATH),g'
+
+lg.conf.sample: Makefile $(srcdir)/lg.conf.sample.in
+	rm -f lg.conf.sample lg.conf.sample.tmp; \
+	$(auto_edit) $(srcdir)/lg.conf.sample.in >lg.conf.sample.tmp; \
+	mv lg.conf.sample.tmp lg.conf.sample
+
+rancid.conf.sample: Makefile $(srcdir)/rancid.conf.sample.in
+	rm -f rancid.conf.sample rancid.conf.sample.tmp; \
+	$(auto_edit) $(srcdir)/rancid.conf.sample.in >rancid.conf.sample.tmp; \
+	mv rancid.conf.sample.tmp rancid.conf.sample
diff --git a/etc/Makefile.in b/etc/Makefile.in
new file mode 100644
index 0000000..7a52e35
--- /dev/null
+++ b/etc/Makefile.in
@@ -0,0 +1,375 @@
+# Makefile.in generated by automake 1.8 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = etc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/include/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+am__installdirs = $(DESTDIR)$(pkgdatadir)
+pkgdataDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(pkgdata_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+ADMINMAILPLUS = @ADMINMAILPLUS@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+COMM = @COMM@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CVS = @CVS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DIFF = @DIFF@
+DIFF_CMD = @DIFF_CMD@
+DIRNAME = @DIRNAME@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+ENV_PATH = @ENV_PATH@
+EXEEXT = @EXEEXT@
+EXPECT_PATH = @EXPECT_PATH@
+FIND = @FIND@
+GREP = @GREP@
+ID = @ID@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LG_PING_CMD = @LG_PING_CMD@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAILPLUS = @MAILPLUS@
+MAKE = @MAKE@
+MAKEINFO = @MAKEINFO@
+MKDIR = @MKDIR@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERLV = @PERLV@
+PERLV_PATH = @PERLV_PATH@
+PING_PATH = @PING_PATH@
+RSH = @RSH@
+SENDMAIL = @SENDMAIL@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SORT = @SORT@
+SSH = @SSH@
+STRIP = @STRIP@
+TAR = @TAR@
+TELNET = @TELNET@
+TOUCH = @TOUCH@
+U = @U@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+
+#AUTOMAKE_OPTIONS=foreign no-dependencies
+AUTOMAKE_OPTIONS = foreign
+pkgdata_DATA = lg.conf.sample rancid.conf.sample
+EXTRA_DIST = $(pkgdata_DATA:%=%.in)
+CLEANFILES = $(pkgdata_DATA)
+
+#clean:
+#	rm -f Makefile rancid.conf $(BIN_DATAS) $(BIN_PROGS)
+
+# auto_edit does the autoconf variable substitution.  This allows the
+# substitution to have the full expansion of the variables, e.g.: $sysconfdir
+# will be /prefix/etc instead of ${prefix}/etc.
+#
+# This is a bit of a PITA, but is the method recommended by the autoconf
+# documentation.
+auto_edit = sed \
+	-e 's,@bindir\@,$(bindir),g' \
+	-e 's,@prefix\@,$(prefix),g' \
+	-e 's,@localstatedir\@,$(localstatedir),g' \
+	-e 's,@sysconfdir\@,$(sysconfdir),g' \
+	-e 's,@EXPECT_PATH\@,$(EXPECT_PATH),g' \
+	-e 's,@PERLV_PATH\@,$(PERLV_PATH),g' \
+	-e 's,@ENV_PATH\@,$(ENV_PATH),g'
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  etc/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  etc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+install-pkgdataDATA: $(pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkdir_p) $(DESTDIR)$(pkgdatadir)
+	@list='$(pkgdata_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f"; \
+	  $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f; \
+	done
+
+uninstall-pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgdata_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(pkgdatadir)/$$f"; \
+	  rm -f $(DESTDIR)$(pkgdatadir)/$$f; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	$(mkdir_p) $(DESTDIR)$(pkgdatadir)
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-pkgdataDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-pkgdataDATA
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-data-local install-exec install-exec-am install-info \
+	install-info-am install-man install-pkgdataDATA install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
+	uninstall-pkgdataDATA
+
+
+install-data-local: all
+	@if test -f $(sysconfdir)/rancid.conf ; then \
+	    echo ""; \
+	    echo "WARNING: *** $(sysconfdir)/rancid.conf exists.  See "; \
+	    echo "         *** $(pkgdatadir)/rancid.conf.sample for new"; \
+	    echo "         *** examples."; \
+	    echo ""; \
+	else \
+	    $(INSTALL_DATA) rancid.conf.sample $(sysconfdir)/rancid.conf; \
+	fi; \
+	if test -f $(sysconfdir)/lg.conf ; then \
+	    echo ""; \
+	    echo "WARNING: *** $(sysconfdir)/lg.conf exists.  See "; \
+	    echo "         *** $(pkgdatadir)/lg.conf.sample for new"; \
+	    echo "         *** examples."; \
+	    echo ""; \
+	else \
+	    $(INSTALL_DATA) lg.conf.sample $(sysconfdir)/lg.conf; \
+	fi;
+
+lg.conf.sample: Makefile $(srcdir)/lg.conf.sample.in
+	rm -f lg.conf.sample lg.conf.sample.tmp; \
+	$(auto_edit) $(srcdir)/lg.conf.sample.in >lg.conf.sample.tmp; \
+	mv lg.conf.sample.tmp lg.conf.sample
+
+rancid.conf.sample: Makefile $(srcdir)/rancid.conf.sample.in
+	rm -f rancid.conf.sample rancid.conf.sample.tmp; \
+	$(auto_edit) $(srcdir)/rancid.conf.sample.in >rancid.conf.sample.tmp; \
+	mv rancid.conf.sample.tmp rancid.conf.sample
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/etc/lg.conf.sample.in b/etc/lg.conf.sample.in
new file mode 100644
index 0000000..54e538a
--- /dev/null
+++ b/etc/lg.conf.sample.in
@@ -0,0 +1,188 @@
+# configuration file for the looking glass
+#
+# note: these are perl statements!  Mind the syntax.  "perl -c lg.conf"
+#       should succeed.
+#
+# adjust the path to find [cfj]login, telnet, ssh, rsh, etc.
+#
+$ENV{PATH}="@prefix@/bin:@ENV_PATH@";
+#
+#
+# LG_CACHE_DIR	is the location of the cache directory.  the LG uses this
+#		to hold lock files, the default log file (lg.log), and o/p from
+#		commands that can be very verbose.  it defaults to "tmp",
+#		i.e.: relative to the directory where lg.cgi runs in your
+#		server's (httpd) DocumentRoot (e.g.:
+#		/usr/local/www/data/lg/tmp).
+#
+#$LG_CACHE_DIR="./tmp";
+#
+#
+# LG_CACHE_TIME	is the number of seconds the LG should cache o/p from certain
+#		commands; those that tend to produce a lot of o/p, such as
+#		'show ip bgp dampened-paths'.  it defaults to 600 seconds
+#		(10 minutes).
+#
+#$LG_CACHE_TIME=600;
+#
+#
+# LG_CLOGINRC	is the .cloginrc that the LG should use.  it defaults to
+#		<prefix>/.cloginrc.  note that the .cloginrc must be readable
+#		by the user or group (UID / GID) that will be running the CGI
+#		and the clogin (and friends) will not allow a world readable
+#		.cloginrc.  this is normally the user the server (httpd) runs
+#		under.
+#
+#$LG_CLOGINRC="$ENV(HOME)/.cloginrc";
+#
+#
+# LG_IMAGE	is the filename of an image you wish to appear at the top
+#		of the LG pages.  it can also be other html goo, like
+#		the first example.  this is just handed to print, so \n and
+#		the like will work and mind the character escapes (backslashes).
+#
+#$LG_IMAGE="<img src=/icons/rancid.gif hspace=0>\n <font size=+2>FOO</font>";
+#$LG_IMAGE="<img src=rancid.gif hspace=0>\n";
+#
+#
+# LG_INFO	is info in html format to output at the bottom of main form.
+#		it might be local contact information, disclaimer, etc.  this
+#		is just handed to print, so \n and the like will work and mind
+#		the character escapes (backslashes).
+#
+#$LG_INFO="For support, contact <a href=\"mailto:webmaster\@localhost\">webmaster</a>";
+#
+#
+# LG_LOG	is either a FQPN (fully qualified path name) or the syslog
+#		facility to use for logging.  if not defined, the LG
+#		will log to LG_CACHE_DIR/lg.log.  possible syslog facility
+#		values are from the facility codes in /usr/include/syslog.h
+#		minus the 'LOG_' and lower case.
+#
+#$LG_LOG="$LG_CACHE_DIR/lg.log";
+#$LG_LOG="/tmp/lg.log";
+#$LG_LOG="local0";
+#
+#
+# LG_ROUTERDB	is the router.db in rancid's router.db format, listing
+#		the routers and their platform that should be available to
+#		the looking glass.  if defined, the LG will use this variable
+#		to find the router.db.  if not defined, it will look for it
+#		at <prefix>/<sysconfdir>/router.db.  if it does not exist, it
+#		will build the list from <prefix>/*/router.db (i.e.: the
+#		router.db's from all your groups).  note that if you choose
+#		this last option; the group directories and router.db files'
+#		modes may have to be changed, depending upon the UID/GID of
+#		the user your server (httpd) runs under, since rancid's default
+#		mask is 007 (see etc/rancid.conf).  routers not marked 'up' are
+#		skipped.
+#
+#$LG_ROUTERDB="@sysconfdir@/router.db";
+#
+#
+# LG_STYLE	define a style sheet to be used for formatting HTML.
+#
+#$LG_STYLE="http://www.your.site/style/style.css";
+#
+#
+# Options:
+#
+# LG_AS_REG	*** not implemented.
+#
+#@LG_AS_REG=();
+#
+#
+# LG_BGP_RT	allows a few bgp commands which can produce long output (heavy
+#		router load), such as sh ip bgp neighbor <ip> advertised-routes
+#		would for a transit customer or sh ip b neigh <ip>
+#		received-routes would for a transit provider.
+#
+#$LG_BGP_RT=1;
+#
+#
+# LG_SINGLE	serializes and limits queries per-router to one at a time via
+#		per-router lock files.
+#
+#$LG_SINGLE=0;
+#
+# LG_STRIP	strips login o/p from the looking glass results.  Expect
+#		occassionally screws up disabling echo when passwords are
+#		entered (NOTE: SECURITY CONCERN).  However, this o/p can be
+#		very useful for debugging clogin/flogin/jlogin problems.
+#
+$LG_STRIP=1;
+#
+#
+# Commands/Queries:
+#		Un-comment/Comment the commands that are desired/not desired.
+#		The Commands are separated into a few categories.  The value
+#		of each variable is the string which will appear in the
+#		(lgform.cgi) menu.  Mind the ,'s within hash assignments.
+#
+#		The double-commented (##) queries are not implemented or have
+#		not been tested.
+#
+$queries = {};
+#
+# Interface queries
+$queries->{"interface"} = {
+        framerelay => "show frame-relay PVC [DLCI]",
+        interface => "show interface [interface]"
+};
+#
+# Routing queries
+$queries->{"routing"} = {
+	damp => "show ip bgp dampened-paths",
+	neighbor => "show ip bgp neighbor <IP_addr>",
+	prefix => "show ip bgp <prefix> [netmask]",
+	prefixlist => "show ip prefix-list <list_name>",
+	regex => "show ip bgp regex <regex>",
+	route => "show ip route <prefix> [netmask]",
+	routemap => "show route-map <policy_name/number>",
+	summary => "show ip bgp summary"
+};
+#
+# Debug queries
+$queries->{"debug"} = {
+	log => "Show Logs [ | <match_string>]",
+	ping => "ping <IP_addr | FQDN>",
+	trace => "traceroute <IP_addr | FQDN>"
+};
+#
+# Multicast queries
+$queries->{"multicast"} = {
+	mbgp => "Show ip mbgp <prefix> [netmask]",
+	mbgpsum => "Show ip mbgp summary",
+	# show ip pim interface/show pim interface
+	## pim_interface => "Show PIM Interfaces",
+	# ???/show pim join (extensive)
+	## pim_join => "Show PIM Join [group_address]",
+	# show ip mroute/show multicast route [active]
+	## mroute => "Show Multicast Forwarding Table [active]",
+	# show ip msdp summary/show msdp
+	## msdp => "Show MSDP Peering Status",
+	# show ip msdp sa cache/show msdp source-active
+	## msdpsa => "Show MSDP Source Active Table",
+	# show ip sdr|show multicast sessions
+	## msess => "Show Multicast SDR sessions [detail]",
+	# show ip pim neighbor/show pim neighbors
+	## pim_neighbor => "Show PIM Neighbors [detail]",
+	# show ip pim rp mapping/show pim rps
+	## pim_rp => "Show PIM Rendez-vous Points [detail]",
+	# show ip rpf [address] /show multicast rpf [address]
+	## rpf => "Test Multicast RPF <address>"
+};
+#
+# IPv6 commands
+$queries->{"ipv6"} = {
+	# show bgp ipv6 / ???
+	## v6_bgp => "Show IPv6 BGP table";
+	# show ipv6 interface / show interface
+	## v6_interface => "Show IPv6 interface parameters [interface]";
+	# show bgp ipv6 summary / show bgp summary
+	## v6_summary => "Show IPv6 BGP Summary";
+	# show ipv6 route / show route table inet6.0
+	## v6_route => "Show IPv6 Routes <prefix>";
+};
+#
+# %EOF%
diff --git a/etc/rancid.conf.sample.in b/etc/rancid.conf.sample.in
new file mode 100644
index 0000000..c550c74
--- /dev/null
+++ b/etc/rancid.conf.sample.in
@@ -0,0 +1,59 @@
+#
+# This file sets up the environment used for rancid.  see rancid.conf(5)
+#
+# This will be site specific
+#
+TERM=network;export TERM
+#
+# Under BASEDIR (i.e.: --localstatedir), there will be a "logs" directory for
+# the logs from rancid and a directory for each group of routers defined in
+# LIST_OF_GROUPS (below).  In addition to these, there will be a "CVS"
+# directory which is the cvs repository.
+#
+# Use a full path (no sym-links) for BASEDIR.  Some versions of CVS seem to
+# dislike sym-links.
+#
+TMPDIR=/tmp; export TMPDIR
+# Be careful changing this, it affects CVSROOT below.
+BASEDIR=@localstatedir@; export BASEDIR
+PATH=@bindir@:@ENV_PATH@; export PATH
+# Location of the CVS repository.  Be careful changing this.
+CVSROOT=$BASEDIR/CVS; export CVSROOT
+# Location of log files produced by rancid-run(1).
+LOGDIR=$BASEDIR/logs; export LOGDIR
+#
+# if NOPIPE is set, temp files will be used instead of a cmd pipe during
+# collection from the router(s).
+#NOPIPE=YES; export NOPIPE
+#
+# FILTER_PWDS determines which passwords are filtered from configs by the
+# value set (NO | YES | ALL).  see rancid.conf(5).
+#FILTER_PWDS=YES; export FILTER_PWDS
+#
+# if NOCOMMSTR is set, snmp community strings will be stripped from the configs
+#NOCOMMSTR=YES; export NOCOMMSTR
+#
+# How many hours should pass before complaining about routers that
+# can not be reached.  The value should be greater than the number
+# of hours between your rancid-run cron job.
+OLDTIME=4; export OLDTIME
+#
+# How many hours should pass before complaining that a group's collection
+# (the age of it's lock file) is hung.
+#LOCKTIME=4; export LOCKTIME
+#
+# The number of devices to collect simultaneously.
+#PAR_COUNT=5; export PAR_COUNT
+#
+# list of rancid groups
+#LIST_OF_GROUPS="sl joebobisp"
+# more groups...
+#LIST_OF_GROUPS="$LIST_OF_GROUPS noc billybobisp"
+#
+# For each group, define a list of people to receive the diffs.
+# in sendmail's /etc/aliases.
+#   rancid-group:	joe,moe@foo
+#   rancid-group-admin:	hostmaster
+# be sure to read ../README regarding aliases.
+#
+umask 027