path: root/src/config/pre.in

############################################################
## config/pre.in
## common prefix for all Makefile.in in the Kerberos V5 tree.
##

# These are set per-directory by autoconf 2.52 and 2.53:
#  srcdir=@srcdir@
#  top_srcdir=@top_srcdir@
# but these are only set by autoconf 2.53, and thus not useful to us on
# Mac OS X yet (as of 10.2):
#  abs_srcdir=@abs_srcdir@
#  abs_top_srcdir=@abs_top_srcdir@
#  builddir=@builddir@
#  abs_builddir=@abs_builddir@
#  top_builddir=@top_builddir@
#  abs_top_builddir=@abs_top_builddir@
# The "top" variables refer to the directory with the configure (or
# config.status) script.

WHAT = unix
SHELL=/bin/sh

all:: all-$(WHAT)

clean:: clean-$(WHAT)

distclean:: distclean-$(WHAT)

install:: install-$(WHAT)

check:: check-$(WHAT)

install-headers:: install-headers-$(WHAT)

##############################
# Recursion rule support
#

# The commands for the recursion targets live in config/post.in.
#
# General form of recursion rules:
#
# Each recursive target foo-unix has related targets: foo-prerecurse,
# foo-recurse, and foo-postrecurse
#
# The foo-recurse rule is in post.in.  It is what actually recursively
# calls make.
#
# foo-recurse depends on foo-prerecurse, so any targets that must be
# built before descending into subdirectories must be dependencies of
# foo-prerecurse.
#
# foo-postrecurse depends on foo-recurse, but targets that must be
# built after descending into subdirectories should be have
# foo-recurse as dependencies in addition to being listed under
# foo-postrecurse, to avoid ordering issues.
#
# The foo-prerecurse, foo-recurse, and foo-postrecurse rules are all
# single-colon rules, to avoid nasty ordering problems with
# double-colon rules.
#
# e.g.
# all:: includes foo
# foo:
#	echo foo
# includes::
#	echo bar
# includes::
#	echo baz
#
# will result in "bar", "foo", "baz" on AIX, and possibly others.
all-unix:: all-postrecurse
all-postrecurse: all-recurse
all-recurse: all-prerecurse

all-prerecurse:
all-postrecurse:

clean-unix:: clean-postrecurse
clean-postrecurse: clean-recurse
clean-recurse: clean-prerecurse

clean-prerecurse:
clean-postrecurse:

distclean-unix: distclean-postrecurse
distclean-postrecurse: distclean-recurse
distclean-recurse: distclean-prerecurse

distclean-prerecurse:
distclean-postrecurse:

install-unix:: install-postrecurse
install-postrecurse: install-recurse
install-recurse: install-prerecurse

install-prerecurse:
install-postrecurse:

install-headers-unix:: install-headers-postrecurse
install-headers-postrecurse: install-headers-recurse
install-headers-recurse: install-headers-prerecurse

install-headers-prerecurse:
install-headers-postrecurse:

check-unix:: check-postrecurse
check-postrecurse: check-recurse
check-recurse: check-prerecurse

check-prerecurse:
check-postrecurse:

Makefiles: Makefiles-postrecurse
Makefiles-postrecurse: Makefiles-recurse
Makefiles-recurse: Makefiles-prerecurse

Makefiles-prerecurse:
Makefiles-postrecurse:

#
# end recursion rule support
##############################

# Directory syntax:
#
# begin relative path
REL=
# this is magic... should only be used for preceding a program invocation
C=./
# "/" for UNIX, "\" for Windows; *sigh*
S=/

#SUBDIRS = @subdirs@ $(LOCAL_SUBDIRS)
SUBDIRS_@top_srcdir@ = @subdirs@
SUBDIRS = $(SUBDIRS_@srcdir@) $(LOCAL_SUBDIRS)
#
srcdir = @srcdir@
SRCTOP = @srcdir@/$(BUILDTOP)
top_srcdir = @top_srcdir@
VPATH = @srcdir@
CONFIG_RELTOPDIR = @CONFIG_RELTOPDIR@

FAKEDEST=$(BUILDTOP)/util/fakedest
FAKEPREFIX=$(FAKEDEST)/$(prefix)
FAKELIBDIR=$(FAKEPREFIX)/lib

# DEFS		set by configure
# DEFINES	set by local Makefile.in
# LOCALINCLUDES	set by local Makefile.in
# CPPFLAGS	user override
# CFLAGS	user override but starts off set by configure
ALL_CFLAGS = $(DEFS) $(DEFINES) $(KRB_INCLUDES) $(LOCALINCLUDES) \
	$(CPPFLAGS) $(CFLAGS)

CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
DEFS = @DEFS@
CC = @CC@
LD = $(PURE) @LD@
DEPLIBS = @DEPLIBS@
KRB_INCLUDES = -I$(BUILDTOP)/include -I$(SRCTOP)/include \
	-I$(BUILDTOP)/include/krb5 -I$(SRCTOP)/include/krb5
LDFLAGS = @LDFLAGS@
LD_UNRESOLVED_PREFIX = @LD_UNRESOLVED_PREFIX@
LD_SHLIBDIR_PREFIX = @LD_SHLIBDIR_PREFIX@
LDARGS = @LDARGS@
LIBS = @LIBS@
SRVLIBS = @SRVLIBS@
SRVDEPLIBS = @SRVDEPLIBS@
CLNTLIBS = @CLNTLIBS@
CLNTDEPLIBS = @CLNTDEPLIBS@

INSTALL=@INSTALL@
INSTALL_STRIP=
INSTALL_PROGRAM=@INSTALL_PROGRAM@ $(INSTALL_STRIP)
INSTALL_DATA=@INSTALL_DATA@
INSTALL_SHLIB=@INSTALL_SHLIB@
INSTALL_SETUID=$(INSTALL) $(INSTALL_STRIP) -m 4755 -o root
## This is needed because autoconf will sometimes define @exec_prefix@ to be
## ${prefix}.
prefix=@prefix@
INSTALL_PREFIX=$(prefix)
INSTALL_EXEC_PREFIX=@exec_prefix@
exec_prefix=@exec_prefix@
SHLIB_TAIL_COMP=@SHLIB_TAIL_COMP@

KRB5MANROOT = @mandir@
ADMIN_BINDIR = @sbindir@
SERVER_BINDIR = @sbindir@
CLIENT_BINDIR =@bindir@
ADMIN_MANDIR = $(KRB5MANROOT)/man8
SERVER_MANDIR = $(KRB5MANROOT)/man8
CLIENT_MANDIR = $(KRB5MANROOT)/man1
FILE_MANDIR = $(KRB5MANROOT)/man5
KRB5_LIBDIR = @libdir@
KRB5_SHLIBDIR = @libdir@$(SHLIB_TAIL_COMP)
KRB5_INCDIR = @includedir@
KRB5_INCSUBDIRS = \
	$(KRB5_INCDIR)/gssapi \
	$(KRB5_INCDIR)/kerberosIV

#
# Macros used by the KADM5 (OV-based) unit test system.
# XXX check which of these are actually used!
#
TESTDIR		= $(BUILDTOP)/kadmin/testing
STESTDIR	= $(SRCTOP)/kadmin/testing
COMPARE_DUMP	= $(TESTDIR)/scripts/compare_dump.pl
FIX_CONF_FILES	= $(TESTDIR)/scripts/fixup-conf-files.pl
INITDB		= $(STESTDIR)/scripts/init_db
MAKE_KEYTAB	= $(TESTDIR)/scripts/make-host-keytab.pl
LOCAL_MAKE_KEYTAB= $(TESTDIR)/scripts/make-host-keytab.pl
RESTORE_FILES	= $(STESTDIR)/scripts/restore_files.sh
SAVE_FILES	= $(STESTDIR)/scripts/save_files.sh
ENV_SETUP	= $(TESTDIR)/scripts/env-setup.sh
CLNTTCL		= $(TESTDIR)/util/ovsec_kadm_clnt_tcl
SRVTCL		= $(TESTDIR)/util/ovsec_kadm_srv_tcl
# Dejagnu variables.
# We have to set the host with --host so that setup_xfail will work.
# If we don't set it, then the host type used is "native", which
# doesn't match "*-*-*".
host=@krb5_cv_host@
DEJAFLAGS	= $(DEJALFLAGS) $(CLFLAGS) --debug --srcdir $(srcdir) --host \
		   $(host)
RUNTEST		= runtest $(DEJAFLAGS)

START_SERVERS	= $(STESTDIR)/scripts/start_servers $(TEST_SERVER) $(TEST_PATH)
START_SERVERS_LOCAL = $(STESTDIR)/scripts/start_servers_local

STOP_SERVERS	= $(STESTDIR)/scripts/stop_servers $(TEST_SERVER) $(TEST_PATH)
STOP_SERVERS_LOCAL = $(STESTDIR)/scripts/stop_servers_local
#
# End of macros for the KADM5 unit test system.
#

transform = @program_transform_name@

RM = rm -f
CP  = cp
MV = mv -f
CHMOD=chmod
RANLIB = @RANLIB@
ARCHIVE = @ARCHIVE@
ARADD = @ARADD@
LN = @LN_S@
AWK = @AWK@
LEX = @LEX@
LEXLIB = @LEXLIB@
YACC = @YACC@
PERL = @PERL@
AUTOCONF = autoconf
AUTOCONFFLAGS =
AUTOHEADER = autoheader
AUTOHEADERFLAGS =

HOST_TYPE = @HOST_TYPE@
SHEXT = @SHEXT@
STEXT=@STEXT@
VEXT=@VEXT@

TOPLIBD = $(BUILDTOP)/lib

OBJEXT = o
LIBEXT = a
EXEEXT =

#
# variables for libraries, for use in linking programs
# -- this may want to get broken out into a separate frag later
#
#
# Note: the following variables must be set in any Makefile.in that
# uses KRB5_BUILD_PROGRAM
#
# PROG_LIBPATH	list of dirs, in -Ldir form, to search for libraries at link
# PROG_RPATH	list of dirs, in dir1:dir2 form, for rpath purposes
#
# invocation is like:
# prog: foo.o bar.o $(KRB5_BASE_DEPLIBS)
# 	$(CC_LINK) -o $@ foo.o bar.o $(KRB5_BASE_LIBS)


CC_LINK=@CC_LINK@

# prefix (with no spaces after) for rpath flag to cc
RPATH_FLAG=@RPATH_FLAG@

# this gets set by configure to either $(STLIBEXT) or $(SHLIBEXT),
# depending on whether we're building with shared libraries.
DEPLIBEXT=@DEPLIBEXT@

KADMCLNT_DEPLIB	= $(TOPLIBD)/libkadm5clnt$(DEPLIBEXT)
KADMSRV_DEPLIB	= $(TOPLIBD)/libkadm5srv$(DEPLIBEXT)
KDB5_DEPLIB	= $(TOPLIBD)/libkdb5$(DEPLIBEXT)
DB_DEPLIB	= $(DB_DEPLIB-@DB_VERSION@)
DB_DEPLIB-k5	= $(TOPLIBD)/libdb$(DEPLIBEXT)
DB_DEPLIB-sys	=
GSSRPC_DEPLIB	= $(TOPLIBD)/libgssrpc$(DEPLIBEXT)
GSS_DEPLIB	= $(TOPLIBD)/libgssapi_krb5$(DEPLIBEXT)
KRB4_DEPLIB	= @KRB4_DEPLIB@		# $(TOPLIBD)/libkrb4$(DEPLIBEXT)
DES425_DEPLIB	= @DES425_DEPLIB@	# $(TOPLIBD)/libdes425$(DEPLIBEXT)
KRB5_DEPLIB	= $(TOPLIBD)/libkrb5$(DEPLIBEXT)
CRYPTO_DEPLIB	= $(TOPLIBD)/libk5crypto$(DEPLIBEXT)
COM_ERR_DEPLIB	= $(COM_ERR_DEPLIB-@COM_ERR_VERSION@)
COM_ERR_DEPLIB-sys = # empty
COM_ERR_DEPLIB-k5 = $(TOPLIBD)/libcom_err$(DEPLIBEXT)
SUPPORT_LIBNAME=krb5support
SUPPORT_DEPLIB	= $(TOPLIBD)/lib$(SUPPORT_LIBNAME)$(DEPLIBEXT)

# These are forced to use ".a" as an extension because they're never
# built shared.
SS_DEPLIB	= $(SS_DEPLIB-@SS_VERSION@)
SS_DEPLIB-k5	= $(TOPLIBD)/libss.a
SS_DEPLIB-sys	=
PTY_DEPLIB	= $(TOPLIBD)/libpty.a
APPUTILS_DEPLIB	= $(TOPLIBD)/libapputils.a

KRB5_BASE_DEPLIBS	= $(KRB5_DEPLIB) $(CRYPTO_DEPLIB) $(COM_ERR_DEPLIB) $(SUPPORT_DEPLIB)
KRB4COMPAT_DEPLIBS	= $(KRB4_DEPLIB) $(DES425_DEPLIB) $(KRB5_BASE_DEPLIBS)
KDB5_DEPLIBS		= $(KDB5_DEPLIB)
GSS_DEPLIBS		= $(GSS_DEPLIB)
GSSRPC_DEPLIBS		= $(GSSRPC_DEPLIB) $(GSS_DEPLIBS)
KADM_COMM_DEPLIBS	= $(GSSRPC_DEPLIBS) $(KDB5_DEPLIBS) $(GSSRPC_DEPLIBS)
KADMSRV_DEPLIBS		= $(KADMSRV_DEPLIB) $(KDB5_DEPLIBS) $(KADM_COMM_DEPLIBS)
KADMCLNT_DEPLIBS	= $(KADMCLNT_DEPLIB) $(KADM_COMM_DEPLIBS)

# Header file dependencies we might override.
# See util/depfix.sed.
# Also see depend-verify-* in post.in, which wants to confirm that we're using
# the in-tree versions.
COM_ERR_VERSION = @COM_ERR_VERSION@
COM_ERR_DEPS	= $(COM_ERR_DEPS-@COM_ERR_VERSION@)
COM_ERR_DEPS-sys =
COM_ERR_DEPS-k5	= $(BUILDTOP)/include/com_err.h
SS_VERSION	= @SS_VERSION@
SS_DEPS		= $(SS_DEPS-@SS_VERSION@)
SS_DEPS-sys	=
SS_DEPS-k5	= $(BUILDTOP)/include/ss/ss.h $(BUILDTOP)/include/ss/ss_err.h
DB_VERSION	= @DB_VERSION@
DB_DEPS		= $(DB_DEPS-@DB_HEADER_VERSION@)
DB_DEPS-sys	=
DB_DEPS-k5	= $(BUILDTOP)/include/db.h $(BUILDTOP)/include/db-config.h
DB_DEPS-redirect = $(BUILDTOP)/include/db.h

# Header file dependencies that might depend on whether krb4 support
# is compiled.

KRB_ERR_H_DEP	= @KRB_ERR_H_DEP@

# LIBS gets substituted in... e.g. -lnsl -lsocket

# GEN_LIB is -lgen if needed for regexp
GEN_LIB		= @GEN_LIB@

SS_LIB		= $(SS_LIB-@SS_VERSION@)
SS_LIB-sys	= @SS_LIB@
SS_LIB-k5	= $(TOPLIBD)/libss.a
KDB5_LIB	= -lkdb5
DB_LIB		= @DB_LIB@
KDB5_DB_LIB	= @KDB5_DB_LIB@

KRB5_LIB			= -lkrb5
K5CRYPTO_LIB			= -lk5crypto
COM_ERR_LIB			= -lcom_err
GSS_KRB5_LIB			= -lgssapi_krb5
SUPPORT_LIB			= -l$(SUPPORT_LIBNAME)

# KRB4_LIB is -lkrb4 if building --with-krb4
# needs fixing if ever used on Mac OS X!
KRB4_LIB	= @KRB4_LIB@

# DES425_LIB is -ldes425 if building --with-krb4
# needs fixing if ever used on Mac OS X!
DES425_LIB	= @DES425_LIB@

# HESIOD_LIBS is -lhesiod...
HESIOD_LIBS	= @HESIOD_LIBS@

KRB5_BASE_LIBS	= $(KRB5_LIB) $(K5CRYPTO_LIB) $(COM_ERR_LIB) $(SUPPORT_LIB) $(GEN_LIB) $(LIBS)
KRB4COMPAT_LIBS	= $(KRB4_LIB) $(DES425_LIB) $(KRB5_BASE_LIBS)
KDB5_LIBS	= $(KDB5_LIB) $(KDB5_DB_LIB)
GSS_LIBS	= $(GSS_KRB5_LIB)
# needs fixing if ever used on Mac OS X!
GSSRPC_LIBS	= -lgssrpc $(GSS_LIBS)
KADM_COMM_LIBS	= $(GSSRPC_LIBS)
# need fixing if ever used on Mac OS X!
KADMSRV_LIBS	= -lkadm5srv $(HESIOD_LIBS) $(KDB5_LIBS) $(KADM_COMM_LIBS)
KADMCLNT_LIBS	= -lkadm5clnt $(KADM_COMM_LIBS)

# need fixing if ever used on Mac OS X!
PTY_LIB		= -lpty

# Misc stuff for linking server programs (and maybe some others,
# eventually) but which we don't want to install.
APPUTILS_LIB	= -lapputils

#
# some more stuff for --with-krb4
KRB4_LIBPATH	= @KRB4_LIBPATH@
KRB4_INCLUDES	= @KRB4_INCLUDES@

#
# variables for --with-tcl=
TCL_LIBS	= @TCL_LIBS@
TCL_LIBPATH	= @TCL_LIBPATH@
TCL_RPATH	= @TCL_RPATH@
TCL_MAYBE_RPATH = @TCL_MAYBE_RPATH@
TCL_INCLUDES	= @TCL_INCLUDES@

# error table rules
#
### /* these are invoked as $(...) foo.et, which works, but could be better */
COMPILE_ET= $(COMPILE_ET-@COM_ERR_VERSION@)
COMPILE_ET-sys= compile_et
COMPILE_ET-k5= $(BUILDTOP)/util/et/compile_et -d $(SRCTOP)/util/et

.SUFFIXES:  .h .c .et .ct

# These versions cause both .c and .h files to be generated at once.
# But GNU make doesn't understand this, and parallel builds can trigger
# both of them at once, causing them to stomp on each other.  The versions
# below only update one of the files, so compile_et has to get run twice,
# but it won't break parallel builds.
#.et.h: ; $(COMPILE_ET) $<
#.et.c: ; $(COMPILE_ET) $<

.et.h:
	d=ettmp$$$$ ; (cp $< $$d.et && $(COMPILE_ET) $$d.et && mv $$d.h $*.h) ; \
		e=$$? ; rm -f $$d.* ; exit $$e

.et.c:
	d=ettmp$$$$ ; (cp $< $$d.et && $(COMPILE_ET) $$d.et && mv $$d.c $*.c) ; \
		e=$$? ; rm -f $$d.* ; exit $$e

# rule to make object files
#
.SUFFIXES: .c .o
.c.o:
	$(CC) $(ALL_CFLAGS) -c $<

# ss command table rules
#
MAKE_COMMANDS= $(MAKE_COMMANDS-@SS_VERSION@)
MAKE_COMMANDS-sys= mk_cmds
MAKE_COMMANDS-k5= $(BUILDTOP)/util/ss/mk_cmds

.ct.c:
	$(MAKE_COMMANDS) $<

## Parameters to be set by configure for use in lib.in:
##

LN_S=@LN_S@
AR=@AR@

# Set to "lib$(LIBBASE)$(STEXT) lib$(LIBBASE)$(SHEXT) lib$(LIBBASE)$(PFEXT)" or
# some subset thereof by configure; determines which types of libs get
# built.
LIBLIST=@LIBLIST@

# Set by configure; list of library symlinks to make to $(TOPLIBD)
LIBLINKS=@LIBLINKS@

# Set by configure; list of install targets
LIBINSTLIST=@LIBINSTLIST@

# Some of these should really move to pre.in, since programs will need
# it too. (e.g. stuff that has dependencies on the libraries)

# usually .a
STLIBEXT=@STLIBEXT@

# usually .so.$(LIBMAJOR).$(LIBMINOR)
SHLIBVEXT=@SHLIBVEXT@

# usually .so.$(LIBMAJOR) (to allow for major-version compat)
SHLIBSEXT=@SHLIBSEXT@

# usually .so
SHLIBEXT=@SHLIBEXT@

# usually _p.a
PFLIBEXT=@PFLIBEXT@

# File with symbol names to be exported, both functions and data,
# currently not distinguished.
SHLIB_EXPORT_FILE=$(srcdir)/lib$(LIBBASE).exports

# File that needs to be current for building the shared library,
# usually SHLIB_EXPORT_FILE, but not always, if we have to convert
# it to another, intermediate form for the linker.
SHLIB_EXPORT_FILE_DEP=$(SHLIB_EXPORT_FILE)

# Command to run to build a shared library.
# In systems that require multiple commands, like AIX, it may need
# to change to rearrange where the various parameters fit in.
MAKE_SHLIB_COMMAND=@MAKE_SHLIB_COMMAND@

# flags for explicit libraries depending on this one,
# e.g. "-R$(SHLIB_RPATH) $(SHLIB_SHLIB_DIRFLAGS) $(SHLIB_EXPLIBS)"
SHLIB_EXPFLAGS=@SHLIB_EXPFLAGS@

## Parameters to be set by configure for use in libobj.in:

# Set to "OBJS.ST OBJS.SH OBJS.PF" or some subset thereof by
# configure; determines which types of object files get built.
OBJLISTS=@OBJLISTS@

# Note that $(LIBSRCS) *cannot* contain any variable references, or
# the suffix substitution will break on some platforms!
SHLIBOBJS=$(STLIBOBJS:.o=@SHOBJEXT@)
PFLIBOBJS=$(STLIBOBJS:.o=@PFOBJEXT@)

# "$(CC) -G", "$(LD) -Bshareable", etc.
LDCOMBINE=@LDCOMBINE@

# "-h $@", "-h lib$(LIBNAME).$(LIBMAJOR)", etc.
SONAME=@SONAME@

#
# rules to make various types of object files
#
PICFLAGS=@PICFLAGS@
PROFFLAGS=@PROFFLAGS@

# platform-dependent temporary files that should get cleaned up
EXTRA_FILES=@EXTRA_FILES@



##
## end of pre.in
############################################################