Remove unused texinfo sources

Now that the users guide make rules are removed, some of the texinfo
sources are not referenced from anywhere and can be safely removed.

ticket: 7408

2 files changed, 0 insertions, 1775 deletions

diff --git a/doc/glossary.texinfo b/doc/glossary.texinfo
deleted file mode 100644
index d49a56a7fb..0000000000
--- a/doc/glossary.texinfo
+++ /dev/null
@@ -1,64 +0,0 @@
-@table @b
-@item client
-an entity that can obtain a ticket.  This entity is usually either a
-user or a host.
-
-@item host
-a computer that can be accessed over a network.
-
-@item Kerberos
-in Greek mythology, the three-headed dog that guards the entrance to the
-underworld.  In the computing world, Kerberos is a network security
-package that was developed at MIT.
-
-@item KDC
-Key Distribution Center.  A machine that issues Kerberos tickets.
-
-@item keytab
-a @b{key tab}le file containing one or more keys.  A host or service
-uses a @dfn{keytab} file in much the same way as a user uses his/her
-password.
-
-@item principal
-a string that names a specific entity to which a set of credentials may
-be assigned.  It can have an arbitrary number of components, but
-generally has three:
-
-@table @b
-@item primary
-the first part of a Kerberos @i{principal}.  In the case of a user, it
-is the username.  In the case of a service, it is the name of the
-service.
-
-@item instance
-the second part of a Kerberos @i{principal}.  It gives information that
-qualifies the primary.  The instance may be null.  In the case of a
-user, the instance is often used to describe the intended use of the
-corresponding credentials.  In the case of a host, the instance is the
-fully qualified hostname.
-
-@item realm
-the logical network served by a single Kerberos database and a set of
-Key Distribution Centers.  By convention, realm names are generally all
-uppercase letters, to differentiate the realm from the internet domain.
-@end table
-
-@noindent
-The typical format of a typical Kerberos principal is
-primary/instance@@REALM.
-
-@item service
-any program or computer you access over a network.  Examples of services
-include ``host'' (a host, @i{e.g.}, when you use @code{telnet} and
-@code{rsh}), ``ftp'' (FTP), ``krbtgt'' (authentication;
-cf. @i{ticket-granting ticket}), and ``pop'' (email).
-
-@item ticket
-a temporary set of electronic credentials that verify the identity of a
-client for a particular service.
-
-@item TGT
-Ticket-Granting Ticket.  A special Kerberos ticket that permits the
-client to obtain additional Kerberos tickets within the same Kerberos
-realm.
-@end table
diff --git a/doc/user-guide.texinfo b/doc/user-guide.texinfo
deleted file mode 100644
index 0dafe875c7..0000000000
--- a/doc/user-guide.texinfo
+++ /dev/null
@@ -1,1711 +0,0 @@
-\input texinfo @c -*-texinfo-*-
-@c %**start of header
-@c guide
-@setfilename krb5-user.info
-@settitle Kerberos V5 UNIX User's Guide
-@setchapternewpage odd                  @c chapter begins on next odd page
-@c @setchapternewpage on                   @c chapter begins on next page
-@c @smallbook                              @c Format for 7" X 9.25" paper
-@documentencoding UTF-8
-@c %**end of header
-@copying
-Copyright @copyright{} 1985-2010 by the Massachusetts Institute of Technology.
-@end copying
-
-@paragraphindent 0
-@iftex
-@parskip 6pt plus 6pt
-@end iftex
-
-@dircategory Kerberos
-@direntry
-* krb5-user: (krb5-user).               Kerberos V5 UNIX User's Guide
-@end direntry
-
-@include definitions.texinfo
-@set EDITION 1.0
-
-@finalout                               @c don't print black warning boxes
-
-@titlepage
-@title @value{PRODUCT} UNIX User's Guide
-@subtitle Release:  @value{RELEASE}
-@subtitle Document Edition:  @value{EDITION}
-@subtitle Last updated:  @value{UPDATED}
-@author @value{COMPANY}
-
-@page
-@vskip 0pt plus 1filll
-@insertcopying
-@end titlepage
-
-@comment  node-name,  next,  previous,  up
-@node Top, Introduction, (dir), (dir)
-
-@ifinfo
-This file describes how to use the @value{PRODUCT} client programs.
-
-@insertcopying
-@end ifinfo
-
-@c The master menu is updated using emacs19's M-x texinfo-all-menus-update
-@c function.  Don't forget to run M-x texinfo-every-node-update after
-@c you add a new section or subsection, or after you've rearranged the
-@c comand before each @section or @subsection!  All you need to enter
-@c is:
-@c
-@c @section New Section Name
-@c
-@c M-x texinfo-every-node-update will take care of calculating the
-@c node's forward and back pointers.
-@c
-@c ---------------------------------------------------------------------
-
-@menu
-* Introduction::                
-* Kerberos V5 Tutorial::        
-* Kerberos V5 Reference::       
-* Kerberos Glossary::           
-* Copyright::                   
-@end menu
-
-@node Introduction, Kerberos V5 Tutorial, Top, Top
-@chapter Introduction
-
-@ifset CYGNUS
-@value{PRODUCT} is based on the Kerberos V5 authentication system
-developed at MIT.
-@end ifset
-@ifset MIT
-Kerberos V5 is an authentication system developed at MIT.
-@end ifset
-Kerberos is named for the three-headed watchdog from Greek mythology,
-who guarded the entrance to the underworld.
-
-Under Kerberos, a client (generally either a user or a service) sends a
-request for a ticket to the @i{Key Distribution Center} (KDC).  The KDC
-creates a @dfn{ticket-granting ticket} (TGT) for the client, encrypts it
-using the client's password as the key, and sends the encrypted TGT back
-to the client.  The client then attempts to decrypt the TGT, using its
-password.  If the client successfully decrypts the TGT (@i{i.e.}, if the
-client gave the correct password), it keeps the decrypted TGT, which
-indicates proof of the client's identity.
-
-The TGT, which expires at a specified time, permits the client to obtain
-additional tickets, which give permission for specific services.  The
-requesting and granting of these additional tickets is user-transparent.
-
-Since Kerberos negotiates authenticated, and optionally encrypted,
-communications between two points anywhere on the internet, it provides
-a layer of security that is not dependent on which side of a firewall
-either client is on.  Since studies have shown that half of the computer
-security breaches in industry happen from @i{inside} firewalls,
-@value{COMPANY}'s @value{PRODUCT} plays a vital role in maintaining your
-network security.
-
-The @value{PRODUCT} package is designed to be easy to use.  Most of the
-commands are nearly identical to UNIX network programs you already
-use.  @value{PRODUCT} is a @dfn{single-sign-on} system, which means
-that you have to type your password only once per session, and Kerberos
-does the authenticating and encrypting transparently.
-
-@menu
-* What is a Ticket?::           
-* What is a Kerberos Principal?::  
-@end menu
-
-@node What is a Ticket?, What is a Kerberos Principal?, Introduction, Introduction
-@section What is a Ticket?
-
-Your Kerberos @dfn{credentials}, or ``@dfn{tickets}'', are a set of
-electronic information that can be used to verify your identity.  Your
-Kerberos tickets may be stored in a file, or they may exist only in
-memory.
-
-The first ticket you obtain is a @dfn{ticket-granting ticket}, which
-permits you to obtain additional tickets.  These additional tickets give
-you permission for specific services.  The requesting and granting of
-these additional tickets happens transparently.
-
-A good analogy for the ticket-granting ticket is a three-day ski pass
-that is good at four different resorts.  You show the pass at whichever
-resort you decide to go to (until it expires), and you receive a lift
-ticket for that resort.  Once you have the lift ticket, you can ski all
-you want at that resort.  If you go to another resort the next day, you
-once again show your pass, and you get an additional lift ticket for the
-new resort.  The difference is that the @value{PRODUCT} programs notice
-that you have the weekend ski pass, and get the lift ticket for you, so
-you don't have to perform the transactions yourself.
-
-@node What is a Kerberos Principal?,  , What is a Ticket?, Introduction
-@section What is a Kerberos Principal?
-
-A Kerberos @dfn{principal} is a unique identity to which Kerberos can
-assign tickets.  Principals can have an arbitrary number of
-components.  Each component is separated by a component separator,
-generally `/'.  The last component is the realm, separated from the
-rest of the principal by the realm separator, generally `@@'.  If there
-is no realm component in the principal, then it will be assumed that
-the principal is in the default realm for the context in which it is
-being used.
-
-Traditionally, a principal is divided into three parts:  the
-@dfn{primary}, the @dfn{instance}, and the @dfn{realm}.  The format of
-a typical Kerberos V5 principal is @code{primary/instance@@REALM}.
-
-@itemize @bullet
-@item The @dfn{primary} is the first part of the principal.  In the case
-of a user, it's the same as your username.  For a host, the primary is
-the word @code{host}.
-
-@item The @dfn{instance} is an optional string that qualifies the
-primary.  The instance is separated from the primary by a slash
-(@code{/}).  In the case of a user, the instance is usually null, but a
-user might also have an additional principal, with an instance called
-@samp{admin}, which he/she uses to administrate a database.  The
-principal @code{@value{RANDOMUSER1}@@@value{PRIMARYREALM}} is completely
-separate from the principal
-@code{@value{RANDOMUSER1}/admin@@@value{PRIMARYREALM}}, with a separate
-password, and separate permissions.  In the case of a host, the instance
-is the fully qualified hostname, e.g.,
-@code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}.
-
-@item The @dfn{realm} is your Kerberos realm.  In most cases, your
-Kerberos realm is your domain name, in upper-case letters.  For example,
-the machine @code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}} would be in
-the realm @code{@value{SECONDREALM}}.
-@end itemize
-
-@node Kerberos V5 Tutorial, Kerberos V5 Reference, Introduction, Top
-@chapter Kerberos V5 Tutorial
-
-This tutorial is intended to familiarize you with the @value{PRODUCT}
-client programs.  We will represent your prompt as ``@code{shell%}''.
-So an instruction to type the ``@kbd{ls}'' command would be represented as
-follows:
-
-@need 600
-@smallexample
-@group
-@b{shell%} ls
-@end group
-@end smallexample
-
-In these examples, we will use sample usernames, such as
-@code{@value{RANDOMUSER1}} and @code{@value{RANDOMUSER2}}, sample
-hostnames, such as @code{@value{RANDOMHOST1}} and
-@code{@value{RANDOMHOST2}}, and sample domain names, such as
-@code{@value{PRIMARYDOMAIN}} and @code{@value{SECONDDOMAIN}}.  When you
-see one of these, substitute your username, hostname, or domain name
-accordingly.
-
-@menu
-* Setting Up to Use Kerberos V5::  
-* Ticket Management::           
-* Password Management::         
-* Kerberos V5 Applications::    
-@end menu
-
-@node Setting Up to Use Kerberos V5, Ticket Management, Kerberos V5 Tutorial, Kerberos V5 Tutorial
-@section Setting Up to Use @value{PRODUCT}
-
-Your system administrator will have installed the @value{PRODUCT}
-programs in whichever directory makes the most sense for your system.
-We will use @code{@value{ROOTDIR}} throughout this guide to refer to the
-top-level directory @value{PRODUCT} directory.  We will therefor use
-@code{@value{BINDIR}} to denote the location of the @value{PRODUCT} user
-programs.  In your installation, the directory name may be different,
-but whatever the directory name is, you should make sure it is included
-in your path.  You will probably want to put it @i{ahead of} the
-directories @code{/bin} and @code{/usr/bin} so you will get the
-@value{PRODUCT} network programs, rather than the standard UNIX
-versions, when you type their command names.
-
-@node Ticket Management, Password Management, Setting Up to Use Kerberos V5, Kerberos V5 Tutorial
-@section Ticket Management
-
-On many systems, Kerberos is built into the login program, and you get
-tickets automatically when you log in.  Other programs, such as
-@code{rsh}, @code{rcp}, @code{telnet}, and @code{rlogin}, can forward
-copies of your tickets to the remote host.  Most of these programs also
-automatically destroy your tickets when they exit.  However,
-@value{COMPANY} recommends that you explicitly destroy your Kerberos
-tickets when you are through with them, just to be sure.  One way to
-help ensure that this happens is to add the @code{kdestroy} command to
-your @code{.logout} file.  Additionally, if you are going to be away
-from your machine and are concerned about an intruder using your
-permissions, it is safest to either destroy all copies of your tickets,
-or use a screensaver that locks the screen.
-
-@need 2000
-@menu
-* Kerberos Ticket Properties::  
-* Obtaining Tickets with kinit::  
-* Viewing Your Tickets with klist::  
-* Destroying Your Tickets with kdestroy::  
-@end menu
-
-@node Kerberos Ticket Properties, Obtaining Tickets with kinit, Ticket Management, Ticket Management
-@subsection Kerberos Ticket Properties
-
-@noindent
-There are various properties that Kerberos tickets can have:
-
-If a ticket is @dfn{forwardable}, then the KDC can issue a new ticket with
-a different network address based on the forwardable ticket.  This
-allows for authentication forwarding without requiring a password to be
-typed in again.  For example, if a user with a forwardable TGT logs
-into a remote system, the KDC could issue a new TGT for that user with
-the network address of the remote system, allowing authentication on
-that host to work as though the user were logged in locally.
-
-When the KDC creates a new ticket based on a forwardable ticket, it
-sets the @dfn{forwarded} flag on that new ticket.  Any tickets that are
-created based on a ticket with the forwarded flag set will also have
-their forwarded flags set.
-
-A @dfn{proxiable} ticket is similar to a forwardable ticket in that it
-allows a service to take on the identity of the client.  Unlike a
-forwardable ticket, however, a proxiable ticket is only issued for
-specific services.  In other words, a ticket-granting ticket cannot be
-issued based on a ticket that is proxiable but not forwardable.
-
-A @dfn{proxy} ticket is one that was issued based on a proxiable ticket.
-
-A @dfn{postdated} ticket is issued with the @i{invalid} flag set.
-After the starting time listed on the ticket, it can be presented to
-the KDC to obtain valid tickets.  
-
-Tickets with the @dfn{postdateable} flag set can be used to issue postdated
-tickets.
-
-@dfn{Renewable} tickets can be used to obtain new session keys without
-the user entering their password again.  A renewable ticket has two
-expiration times.  The first is the time at which this particular
-ticket expires.  The second is the latest possible expiration time for
-any ticket issued based on this renewable ticket.
-
-A ticket with the @dfn{initial} flag set was issued based on the
-authentication protocol, and not on a ticket-granting ticket.   Clients
-that wish to ensure that the user's key has been recently presented for
-verification could specify that this flag must be set to accept the
-ticket.
-
-An @dfn{invalid} ticket must be rejected by application servers.  Postdated
-tickets are usually issued with this flag set, and must be validated by
-the KDC before they can be used.
-
-A @dfn{preauthenticated} ticket is one that was only issued after the
-client requesting the ticket had authenticated itself to the KDC.
-
-The @dfn{hardware authentication} flag is set on a ticket which
-required the use of hardware for authentication.  The hardware is
-expected to be possessed only by the client which requested the
-tickets.
-
-If a ticket has the @dfn{transit policy checked} flag set, then the KDC that
-issued this ticket implements the transited-realm check policy and
-checked the transited-realms list on the ticket.  The transited-realms
-list contains a list of all intermediate realms between the realm of the
-KDC that issued the first ticket and that of the one that issued the
-current ticket.  If this flag is not set, then the application server
-must check the transited realms itself or else reject the ticket.
-
-The @dfn{okay as delegate} flag indicates that the server specified in
-the ticket is suitable as a delegate as determined by the policy of
-that realm.  A server that is acting as a delegate has been granted a
-proxy or a forwarded TGT.  This flag is a new addition to the
-@value{PRODUCT} protocol and is not yet implemented on MIT servers.
-
-An @dfn{anonymous}  ticket is one in which the named principal is a generic
-principal for that realm; it does not actually specify the individual
-that will be using the ticket.  This ticket is meant only to securely
-distribute a session key.  This is a new addition to the @value{PRODUCT}
-protocol and is not yet implemented on MIT servers.
-
-@node Obtaining Tickets with kinit, Viewing Your Tickets with klist, Kerberos Ticket Properties, Ticket Management
-@subsection Obtaining Tickets with kinit
-
-If your site is using the @value{PRODUCT} login program, you will get
-Kerberos tickets automatically when you log in.  If your site uses a
-different login program, you may need to explicitly obtain your Kerberos
-tickets, using the @code{kinit} program.  Similarly, if your Kerberos
-tickets expire, use the @code{kinit} program to obtain new ones.
-
-@need 1500
-To use the @code{kinit} program, simply type @kbd{kinit} and then type
-your password at the prompt.  For example, Jennifer (whose username is
-@code{@value{RANDOMUSER1}}) works for Bleep, Inc. (a fictitious company
-with the domain name @code{@value{PRIMARYDOMAIN}} and the Kerberos realm
-@code{@value{PRIMARYREALM}}).  She would type:
-
-@smallexample
-@group
-@b{shell%} kinit
-@b{Password for @value{RANDOMUSER1}@@@value{PRIMARYREALM}:} @i{<-- [Type @value{RANDOMUSER1}'s password here.]}
-@b{shell%}
-@end group
-@end smallexample
-
-@need 1000
-If you type your password incorrectly, kinit will give you the following
-error message:
-
-@smallexample
-@group
-@b{shell%} kinit
-@b{Password for @value{RANDOMUSER1}@@@value{PRIMARYREALM}:} @i{<-- [Type the wrong password here.]}
-@b{kinit: Password incorrect}
-@b{shell%}
-@end group
-@end smallexample
-
-@noindent and you won't get Kerberos tickets.
-
-@noindent Notice that @code{kinit} assumes you want tickets for your own
-username in your default realm.  
-@need 1500
-Suppose Jennifer's friend David is visiting, and he wants to borrow a
-window to check his mail.  David needs to get tickets for himself in his
-own realm, @value{SECONDREALM}.@footnote{Note:  the realm
-@value{SECONDREALM} must be listed in your computer's Kerberos
-configuration file, @code{/etc/krb5.conf}.}  He would type:
-
-@smallexample
-@group
-@b{shell%} kinit @value{RANDOMUSER2}@@@value{SECONDREALM}
-@b{Password for @value{RANDOMUSER2}@@@value{SECONDREALM}:} @i{<-- [Type @value{RANDOMUSER2}'s password here.]}
-@b{shell%}
-@end group
-@end smallexample
-
-@noindent David would then have tickets which he could use to log onto
-his own machine.  Note that he typed his password locally on Jennifer's
-machine, but it never went over the network.  Kerberos on the local host
-performed the authentication to the KDC in the other realm.
-
-@need 1000
-If you want to be able to forward your tickets to another host, you need
-to request @dfn{forwardable} tickets.  You do this by specifying the
-@kbd{-f} option:
-
-@smallexample
-@group
-@b{shell%} kinit -f
-@b{Password for @value{RANDOMUSER1}@@@value{PRIMARYREALM}:} @i{<-- [Type your password here.]}
-@b{shell%}
-@end group
-@end smallexample
-
-@noindent
-Note that @code{kinit} does not tell you that it obtained forwardable
-tickets; you can verify this using the @code{klist} command
-(@pxref{Viewing Your Tickets with klist}).
-
-Normally, your tickets are good for your system's default ticket
-lifetime, which is ten hours on many systems.  You can specify a
-different ticket lifetime with the @samp{-l} option.  Add the letter
-@samp{s} to the value for seconds, @samp{m} for minutes, @samp{h} for
-hours, or @samp{d} for days.
-@need 1500
-For example, to obtain forwardable tickets for
-@code{@value{RANDOMUSER2}@@@value{SECONDREALM}} that would be good for
-three hours, you would type:
-
-@smallexample
-@group
-@b{shell%} kinit -f -l 3h @value{RANDOMUSER2}@@@value{SECONDREALM}
-@b{Password for @value{RANDOMUSER2}@@@value{SECONDREALM}:} @i{<-- [Type @value{RANDOMUSER2}'s password here.]}
-@b{shell%}
-@end group
-@end smallexample
-
-@noindent
-You cannot mix units; specifying a lifetime of @samp{3h30m} would result
-in an error.  Note also that most systems specify a maximum ticket
-lifetime.  If you request a longer ticket lifetime, it will be
-automatically truncated to the maximum lifetime.
-
-@node Viewing Your Tickets with klist, Destroying Your Tickets with kdestroy, Obtaining Tickets with kinit, Ticket Management
-@subsection Viewing Your Tickets with klist
-
-The @code{klist} command shows your tickets.  When you first obtain
-tickets, you will have only the ticket-granting ticket.  (@xref{What is
-a Ticket?}.)  The listing would look like this:
-
-@smallexample
-@group
-@b{shell%} klist
-Ticket cache: /tmp/krb5cc_ttypa
-Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM}
-
-Valid starting     Expires            Service principal
-06/07/04 19:49:21  06/08/04 05:49:19  krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM}
-@b{shell%}
-@end group
-@end smallexample
-
-@noindent
-The ticket cache is the location of your ticket file.  In the above
-example, this file is named @code{/tmp/krb5cc_ttypa}.  The default
-principal is your kerberos @dfn{principal}.  (@pxref{What is a Kerberos
-Principal?})
-
-The ``valid starting'' and ``expires'' fields describe the period of
-time during which the ticket is valid.  The @dfn{service principal}
-describes each ticket.  The ticket-granting ticket has the primary
-@code{krbtgt}, and the instance is the realm name.
-
-@need 2000
-Now, if @value{RANDOMUSER1} connected to the machine
-@code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, and then typed
-@kbd{klist} again, she would have gotten the following result:
-
-@smallexample
-@group
-@b{shell%} klist
-Ticket cache: /tmp/krb5cc_ttypa
-Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM}
-
-Valid starting     Expires            Service principal
-06/07/04 19:49:21  06/08/04 05:49:19  krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM}
-06/07/04 20:22:30  06/08/04 05:49:19  host/@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}@@@value{PRIMARYREALM}
-@b{shell%}
-@end group
-@end smallexample
-
-@noindent
-Here's what happened:  when @value{RANDOMUSER1} used telnet to connect
-to the host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, the telnet
-program presented her ticket-granting ticket to the KDC and requested a
-host ticket for the host
-@code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}.  The KDC sent the host
-ticket, which telnet then presented to the host
-@code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, and she was allowed to
-log in without typing her password.
-
-@need 3000
-Suppose your Kerberos tickets allow you to log into a host in another
-domain, such as @code{@value{RANDOMHOST2}.@value{SECONDDOMAIN}}, which
-is also in another Kerberos realm, @code{@value{SECONDREALM}}.  If you
-telnet to this host, you will receive a ticket-granting ticket for the
-realm @code{@value{SECONDREALM}}, plus the new @code{host} ticket for
-@code{@value{RANDOMHOST2}.@value{SECONDDOMAIN}}.  @kbd{klist} will now
-show:
-
-@smallexample
-@group
-@b{shell%} klist
-Ticket cache: /tmp/krb5cc_ttypa
-Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM}
-
-Valid starting     Expires            Service principal
-06/07/04 19:49:21  06/08/04 05:49:19  krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM}
-06/07/04 20:22:30  06/08/04 05:49:19  host/@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}@@@value{PRIMARYREALM}
-06/07/04 20:24:18  06/08/04 05:49:19  krbtgt/@value{SECONDREALM}@@@value{PRIMARYREALM}
-06/07/04 20:24:18  06/08/04 05:49:19  host/@value{RANDOMHOST2}.@value{SECONDDOMAIN}@@@value{SECONDREALM}
-@b{shell%}
-@end group
-@end smallexample
-
-You can use the @code{-f} option to view the @dfn{flags} that apply to
-your tickets.  The flags are:
-
-@table @b
-@itemx F
-@b{F}orwardable
-@itemx f
-@b{f}orwarded
-@itemx P
-@b{P}roxiable
-@itemx p
-@b{p}roxy
-@itemx D
-post@b{D}ateable
-@itemx d
-post@b{d}ated
-@itemx R
-@b{R}enewable
-@itemx I
-@b{I}nitial
-@itemx i
-@b{i}nvalid
-@itemx H
-@b{H}ardware authenticated
-@itemx A
-pre@b{A}uthenticated
-@itemx T
-@b{T}ransit policy checked
-@itemx O
-@b{O}kay as delegate
-@itemx a
-@b{a}nonymous
-@end table
-
-@need 1500
-Here is a sample listing.  In this example, the user @value{RANDOMUSER1}
-obtained her initial tickets (@samp{I}), which are forwardable
-(@samp{F}) and postdated (@samp{d}) but not yet validated (@samp{i}).
-(@xref{kinit Reference}, for more information about postdated tickets.)
-
-@smallexample
-@group
-@b{shell%} klist -f
-@b{Ticket cache: /tmp/krb5cc_320
-Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM}
-
-Valid starting      Expires             Service principal
-31/07/05 19:06:25  31/07/05 19:16:25  krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM}
-        Flags: FdiI
-shell%}
-@end group
-@end smallexample
-
-@need 1500
-In the following example, the user @value{RANDOMUSER2}'s tickets were
-forwarded (@samp{f}) to this host from another host.  The tickets are
-reforwardable (@samp{F}).
-
-@smallexample
-@group
-@b{shell%} klist -f
-@b{Ticket cache: /tmp/krb5cc_p11795
-Default principal: @value{RANDOMUSER2}@@@value{SECONDREALM}
-
-Valid starting     Expires            Service principal
-07/31/05 11:52:29  07/31/05 21:11:23  krbtgt/@value{SECONDREALM}@@@value{SECONDREALM}
-        Flags: Ff
-07/31/05 12:03:48  07/31/05 21:11:23  host/@value{RANDOMHOST2}.@value{SECONDDOMAIN}@@@value{SECONDREALM}
-        Flags: Ff
-shell%}
-@end group
-@end smallexample
-
-@node Destroying Your Tickets with kdestroy,  , Viewing Your Tickets with klist, Ticket Management
-@subsection Destroying Your Tickets with kdestroy
-
-Your Kerberos tickets are proof that you are indeed yourself, and
-tickets can be stolen.  If this happens, the person who has them can
-masquerade as you until they expire.  For this reason, you should
-destroy your Kerberos tickets when you are away from your computer.
-
-@need 1000
-Destroying your tickets is easy.  Simply type @kbd{kdestroy}.
-
-@smallexample
-@group
-@b{shell%} kdestroy
-@b{shell%}
-@end group
-@end smallexample
-
-@need 1500
-If @code{kdestroy} fails to destroy your tickets, it will beep and give
-an error message.  For example, if @code{kdestroy} can't find any
-tickets to destroy, it will give the following message:
-
-@smallexample
-@group
-@b{shell%} kdestroy
-@b{kdestroy: No credentials cache file found while destroying cache
-shell%}
-@end group
-@end smallexample
-
-@node Password Management, Kerberos V5 Applications, Ticket Management, Kerberos V5 Tutorial
-@section Password Management
-
-Your password is the only way Kerberos has of verifying your identity.
-If someone finds out your password, that person can masquerade as
-you---send email that comes from you, read, edit, or delete your files,
-or log into other hosts as you---and no one will be able to tell the
-difference.  For this reason, it is important that you choose a good
-password (@pxref{Password Advice}), and keep it secret.  If you need to
-give access to your account to someone else, you can do so through
-Kerberos.  (@xref{Granting Access to Your Account}.)  You should
-@i{never} tell your password to anyone, including your system
-administrator, for any reason.  You should change your password
-frequently, particularly any time you think someone may have found out
-what it is.
-
-@menu
-* Changing Your Password::      
-* Password Advice::             
-* Granting Access to Your Account::  
-@end menu
-
-@node Changing Your Password, Password Advice, Password Management, Password Management
-@subsection Changing Your Password
-
-@need 2500
-To change your Kerberos password, use the @code{kpasswd} command.  It
-will ask you for your old password (to prevent someone else from walking
-up to your computer when you're not there and changing your password),
-and then prompt you for the new one twice.  (The reason you have to type
-it twice is to make sure you have typed it correctly.)  For example,
-user @code{@value{RANDOMUSER2}} would do the following:
-
-@smallexample
-@group
-@b{shell%} kpasswd
-@b{Password for @value{RANDOMUSER2}:}    @i{<- Type your old password.}
-@b{Enter new password:}    @i{<- Type your new password.}
-@b{Enter it again:}  @i{<- Type the new password again.}
-@b{Password changed.}
-@b{shell%}
-@end group
-@end smallexample
-
-@need 1800
-If @value{RANDOMUSER2} typed the incorrect old password, he would get
-the following message:
-
-@smallexample
-@group
-@b{shell%} kpasswd
-@b{Password for @value{RANDOMUSER2}:}  @i{<- Type the incorrect old password.}
-@b{kpasswd: Password incorrect while getting initial ticket
-shell%}
-@end group
-@end smallexample
-
-@need 2500
-If you make a mistake and don't type the new password the same way
-twice, @code{kpasswd} will ask you to try again:
-
-@smallexample
-@group
-@b{shell%} kpasswd
-@b{Password for @value{RANDOMUSER2}:}  @i{<- Type the old password.}
-@b{Enter new password:}  @i{<- Type the new password.}
-@b{Enter it again:} @i{<- Type a different new password.}
-@b{kpasswd: Password mismatch while reading password
-shell%}
-@end group
-@end smallexample
-
-Once you change your password, it takes some time for the change to
-propagate through the system.  Depending on how your system is set up,
-this might be anywhere from a few minutes to an hour or more.  If you
-need to get new Kerberos tickets shortly after changing your password,
-try the new password.  If the new password doesn't work, try again using
-the old one.
-
-@node Password Advice, Granting Access to Your Account, Changing Your Password, Password Management
-@subsection Password Advice
-
-Your password can include almost any character you can type (except
-control keys and the ``enter'' key).  A good password is one you can
-remember, but that no one else can easily guess.  Examples of @i{bad}
-passwords are words that can be found in a dictionary, any common or
-popular name, especially a famous person (or cartoon character), your
-name or username in any form (@i{e.g.}, forward, backward, repeated
-twice, @i{etc.}), your spouse's, child's, or pet's name, your birth
-date, your social security number, and any sample password that appears
-in this (or any other) manual.
-
-@need 2200
-@value{COMPANY} recommends that your password be at least 6 characters
-long, and contain UPPER- and lower-case letters, numbers, and/or
-punctuation marks.  Some passwords that would be good if they weren't
-listed in this manual include:
-
-@itemize @bullet
-@item some initials, like ``GykoR-66.'' for ``Get your kicks on Route
-66.''
-
-@item an easy-to-pronounce nonsense word, like ``slaRooBey'' or
-``krang-its''
-
-@item a misspelled phrase, like ``2HotPeetzas!'' or ``ItzAGurl!!!''
-@end itemize
-
-@noindent Note:  don't actually use any of the above passwords.  They're
-only meant to show you how to make up a good password.  Passwords that
-appear in a manual are the first ones intruders will try.
-
-@need 3800 
-@value{PRODUCT} allows your system administrators to automatically
-reject bad passwords, based on certain criteria, such as a password
-dictionary or a minimum length.  For example, if the user
-@code{@value{RANDOMUSER1}}, who had a policy "strict" that required a
-minimum of 8 characaters, chose a password that was less than 8
-characters, Kerberos would give an error message like the following:
-
-@smallexample
-@group
-@b{shell%} kpasswd
-@b{Password for @value{RANDOMUSER1}:}  @i{<- Type your old password here.}
-
-@value{RANDOMUSER1}'s password is controlled by the policy strict, which
-requires a minimum of 8 characters from at least 3 classes (the five classes
-are lowercase, uppercase, numbers, punctuation, and all other characters).
-
-@b{Enter new password:}  @i{<- Type an insecure new password.}
-@b{Enter it again:}  @i{<- Type it again.}
-
-kpasswd: Password is too short while attempting to change password.
-Please choose another password.
-
-@b{Enter new password:}  @i{<- Type a good password here.}
-@b{Enter it again:}  @i{<- Type it again.}
-@b{Password changed.
-shell%}
-@end group
-@end smallexample
-
-@noindent Your system administrators can choose the message that is
-displayed if you choose a bad password, so the message you see may be
-different from the above example.
-
-@node Granting Access to Your Account,  , Password Advice, Password Management
-@subsection Granting Access to Your Account
-
-@need 1800
-If you need to give someone access to log into your account, you can do
-so through Kerberos, without telling the person your password.  Simply
-create a file called @code{.k5login} in your home directory.  This file
-should contain the Kerberos principal (@xref{What is a Kerberos
-Principal?}.) of each person to whom you wish to give access.  Each
-principal must be on a separate line.  Here is a sample @code{.k5login}
-file:
-
-@smallexample
-@group
-@value{RANDOMUSER1}@@@value{PRIMARYREALM}
-@value{RANDOMUSER2}@@@value{SECONDREALM}
-@end group
-@end smallexample
-
-@noindent This file would allow the users @code{@value{RANDOMUSER1}} and
-@code{@value{RANDOMUSER2}} to use your user ID, provided that they had
-Kerberos tickets in their respective realms.  If you will be logging
-into other hosts across a network, you will want to include your own
-Kerberos principal in your @code{.k5login} file on each of these hosts.
-
-@need 1000
-Using a @code{.k5login} file is much safer than giving out your
-password, because:
-
-@itemize @bullet
-@item You can take access away any time simply by removing the principal
-from your @code{.k5login} file.
-
-@item Although the user has full access to your account on one
-particular host (or set of hosts if your @code{.k5login} file is shared,
-@i{e.g.}, over NFS), that user does not inherit your network privileges.
-
-@item Kerberos keeps a log of who obtains tickets, so a system
-administrator could find out, if necessary, who was capable of using
-your user ID at a particular time.
-@end itemize
-
-One common application is to have a @code{.k5login} file in
-@code{root}'s home directory, giving root access to that machine to the
-Kerberos principals listed.  This allows system administrators to allow
-users to become root locally, or to log in remotely as @code{root},
-without their having to give out the root password, and without anyone
-having to type the root password over the network.
-
-@node Kerberos V5 Applications,  , Password Management, Kerberos V5 Tutorial
-@section Kerberos V5 Applications
-
-@value{PRODUCT} is a @dfn{single-sign-on} system.  This means that you
-only have to type your password once, and the @value{PRODUCT} programs
-do the authenticating (and optionally encrypting) for you.  The way this
-works is that Kerberos has been built into each of a suite of network
-programs.  For example, when you use a @value{PRODUCT} program to
-connect to a remote host, the program, the KDC, and the remote host
-perform a set of rapid negotiations.  When these negotiations are
-completed, your program has proven your identity on your behalf to the
-remote host, and the remote host has granted you access, all in the
-space of a few seconds.
-
-The @value{PRODUCT} applications are versions of existing UNIX network
-programs with the Kerberos features added.
-
-@menu
-* Overview of Additional Features::  
-* telnet::                      
-* rlogin::                      
-* FTP::                         
-* rsh::                         
-* rcp::                         
-* ksu::                         
-@end menu
-
-@node Overview of Additional Features, telnet, Kerberos V5 Applications, Kerberos V5 Applications
-@subsection Overview of Additional Features
-
-The @value{PRODUCT} @dfn{network programs} are those programs that
-connect to another host somewhere on the internet.  These programs
-include @code{rlogin}, @code{telnet}, @code{ftp}, @code{rsh},
-@code{rcp}, and @code{ksu}.  These programs have all of the original
-features of the corresponding non-Kerberos @code{rlogin}, @code{telnet},
-@code{ftp}, @code{rsh}, @code{rcp}, and @code{su} programs, plus
-additional features that transparently use your Kerberos tickets for
-negotiating authentication and optional encryption with the remote host.
-In most cases, all you'll notice is that you no longer have to type your
-password, because Kerberos has already proven your identity.
-
-The @value{PRODUCT} network programs allow you the options of forwarding
-your tickets to the remote host (if you obtained forwardable tickets
-with the @code{kinit} program; @pxref{Obtaining Tickets with kinit}), and
-encrypting data transmitted between you and the remote host.
-
-This section of the tutorial assumes you are familiar with the
-non-Kerberos versions of these programs, and highlights the Kerberos
-functions added in the @value{PRODUCT} package.
-
-@node telnet, rlogin, Overview of Additional Features, Kerberos V5 Applications
-@subsection telnet
-
-The @value{PRODUCT} @code{telnet} command works exactly like the
-standard UNIX telnet program, with the following Kerberos options added:
-
-@table @kbd
-@itemx -f
-forwards a copy of your tickets to the remote host.
-
-@itemx -F
-forwards a copy of your tickets to the remote host, and marks them
-re-forwardable from the remote host.
-
-@itemx -k @i{realm}
-requests tickets for the remote host in the specified realm, instead of
-determining the realm itself.
-
-@itemx -K
-uses your tickets to authenticate to the remote host, but does not log
-you in.
-
-@itemx -a
-attempt automatic login using your tickets.  @code{telnet} will assume
-the same username unless you explicitly specify another.
-
-@itemx -x
-turns on encryption.
-
-@end table
-
-@need 4000
-For example, if @code{@value{RANDOMUSER2}} wanted to use the standard
-UNIX telnet to connect to the machine
-@code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}, he would type:
-
-@smallexample
-@group
-@b{shell%} telnet @value{RANDOMHOST1}.@value{SECONDDOMAIN}
-@b{Trying 128.0.0.5 ...
-Connected to @value{RANDOMHOST1}.@value{SECONDDOMAIN}.
-Escape character is '^]'.
-
-NetBSD/i386 (daffodil) (ttyp3)
-
-login:} @value{RANDOMUSER2}
-@b{Password:}    @i{<- @value{RANDOMUSER2} types his password here}
-@b{Last login: Fri Jun 21 17:13:11 from @value{RANDOMHOST2}.@value{PRIMARYDOMAIN}
-Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
-        The Regents of the University of California.   All rights reserved.
-
-NetBSD 1.1: Tue May 21 00:31:42 EDT 1996
-
-Welcome to NetBSD!
-shell%}
-@end group
-@end smallexample
-
-@noindent Note that the machine
-@code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}} asked for
-@code{@value{RANDOMUSER2}}'s password.  When he typed it, his password
-was sent over the network unencrypted.  If an intruder were watching
-network traffic at the time, that intruder would know
-@code{@value{RANDOMUSER2}}'s password.
-
-@need 4000
-If, on the other hand, @code{@value{RANDOMUSER1}} wanted to use the
-@value{PRODUCT} telnet to connect to the machine
-@code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}}, she could forward a
-copy of her tickets, request an encrypted session, and log on as herself
-as follows:
-
-@smallexample
-@group
-@b{shell%} telnet -a -f -x @value{RANDOMHOST2}.@value{PRIMARYDOMAIN}
-@b{Trying 128.0.0.5...
-Connected to @value{RANDOMHOST2}.@value{PRIMARYDOMAIN}.
-Escape character is '^]'.
-[ Kerberos V5 accepts you as ``@value{RANDOMUSER1}@@@value{PRIMARYDOMAIN}'' ]
-[ Kerberos V5 accepted forwarded credentials ]
-What you type is protected by encryption.
-Last login: Tue Jul 30 18:47:44 from @value{RANDOMHOST1}.@value{SECONDDOMAIN}
-Athena Server (sun4) Version 9.1.11 Tue Jul 30 14:40:08 EDT 2002
-
-shell%}
-@end group
-@end smallexample
-
-@noindent Note that @code{@value{RANDOMUSER1}}'s machine used Kerberos
-to authenticate her to @code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}},
-and logged her in automatically as herself.  She had an encrypted
-session, a copy of her tickets already waiting for her, and she never
-typed her password.
-
-If you forwarded your Kerberos tickets, @code{telnet} automatically
-destroys them when it exits.  The full set of options to @value{PRODUCT}
-@code{telnet} are discussed in the Reference section of this manual.
-(@pxref{telnet Reference})
-
-@need 2000
-@node rlogin, FTP, telnet, Kerberos V5 Applications
-@subsection rlogin
-
-@need 1000
-The @value{PRODUCT} @code{rlogin} command works exactly like the
-standard UNIX rlogin program, with the following Kerberos options added:
-
-@table @kbd
-@itemx -f
-forwards a copy of your tickets to the remote host.
-
-@itemx -F
-forwards a copy of your tickets to the remote host, and marks them
-re-forwardable from the remote host.
-
-@itemx -k @i{realm}
-requests tickets for the remote host in the specified realm, instead of
-determining the realm itself.
-
-@itemx -x
-encrypts the input and output data streams (the username is sent unencrypted)
-
-@end table
-
-@need 3000
-For example, if @code{@value{RANDOMUSER2}} wanted to use the standard
-UNIX rlogin to connect to the machine
-@code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}}, he would type:
-
-@smallexample
-@group
-@b{shell%} rlogin @value{RANDOMHOST1}.@value{SECONDDOMAIN} -l @value{RANDOMUSER2}
-@b{Password:}  @i{<- @value{RANDOMUSER2} types his password here}
-@b{Last login: Fri Jun 21 10:36:32 from :0.0
-Copyright (c) 1980, 1983, 1986, 1988, 1990, 1991, 1993, 1994
-        The Regents of the University of California.   All rights reserved.
-
-NetBSD 1.1: Tue May 21 00:31:42 EDT 1996
-
-Welcome to NetBSD!
-shell%}
-@end group
-@end smallexample
-
-@noindent Note that the machine
-@code{@value{RANDOMHOST1}.@value{SECONDDOMAIN}} asked for
-@code{@value{RANDOMUSER2}}'s password.  When he typed it, his password
-was sent over the network unencrypted.  If an intruder were watching
-network traffic at the time, that intruder would know
-@code{@value{RANDOMUSER2}}'s password.
-
-@need 4000
-If, on the other hand, @code{@value{RANDOMUSER1}} wanted to use
-@value{PRODUCT} rlogin to connect to the machine
-@code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}}, she could forward a
-copy of her tickets, mark them as not forwardable from the remote host,
-and request an encrypted session as follows:
-
-@smallexample
-@group
-@b{shell%} rlogin @value{RANDOMHOST2}.@value{PRIMARYDOMAIN} -f -x
-@b{This rlogin session is using DES encryption for all data transmissions.
-Last login: Thu Jun 20 16:20:50 from @value{RANDOMHOST1}
-Athena Server (sun4) Version 9.1.11 Tue Jul 30 14:40:08 EDT 2002
-shell%}
-@end group
-@end smallexample
-
-@noindent Note that @code{@value{RANDOMUSER1}}'s machine used Kerberos
-to authenticate her to @code{@value{RANDOMHOST2}.@value{PRIMARYDOMAIN}},
-and logged her in automatically as herself.  She had an encrypted
-session, a copy of her tickets were waiting for her, and she never typed
-her password.
-
-If you forwarded your Kerberos tickets, @code{rlogin} automatically
-destroys them when it exits.  The full set of options to @value{PRODUCT}
-@code{rlogin} are discussed in the Reference section of this manual.
-(@pxref{rlogin Reference})
-
-@node FTP, rsh, rlogin, Kerberos V5 Applications
-@subsection FTP
-
-@need 1000
-The @value{PRODUCT} @code{FTP} program works exactly like the standard
-UNIX FTP program, with the following Kerberos features added:
-
-@table @kbd
-@itemx -k @i{realm}
-requests tickets for the remote host in the specified realm, instead of
-determining the realm itself.
-
-@itemx -f
-requests that your tickets be forwarded to the remote host.  The
-@kbd{-f} argument must be the last argument on the command line.
-
-@itemx protect @i{level}
-(issued at the @code{ftp>} prompt) sets the protection level.  ``Clear''
-is no protection; ``safe'' ensures data integrity by verifying the
-checksum, and ``private'' encrypts the data.  Encryption also ensures
-data integrity.
-@end table
-
-@need 5000
-For example, suppose @code{@value{RANDOMUSER1}} wants to get her
-@code{RMAIL} file from the directory @code{~@value{RANDOMUSER1}/Mail},
-on the host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}}.  She wants
-to encrypt the file transfer.  The exchange would look like the
-following:
-
-@smallexample
-@group
-@b{shell%} ftp @value{RANDOMHOST1}.@value{PRIMARYDOMAIN}
-Connected to @value{RANDOMHOST1}.@value{PRIMARYDOMAIN}.
-220 @value{RANDOMHOST1}.@value{PRIMARYDOMAIN} FTP server (Version 5.60) ready.
-334 Using authentication type GSSAPI; ADAT must follow
-GSSAPI accepted as authentication type
-GSSAPI authentication succeeded
-200 Data channel protection level set to private.
-Name (@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}:@value{RANDOMUSER1}): 
-232 GSSAPI user @value{RANDOMUSER1}@@@value{PRIMARYREALM} is authorized as @value{RANDOMUSER1}
-230 User @value{RANDOMUSER1} logged in.
-Remote system type is UNIX.
-Using binary mode to transfer files.
-ftp> protect private
-200 Protection level set to Private.
-ftp> cd ~@value{RANDOMUSER1}/MAIL
-250 CWD command successful.
-ftp> get RMAIL
-227 Entering Passive Mode (128,0,0,5,16,49)
-150 Opening BINARY mode data connection for RMAIL (361662 bytes).
-226 Transfer complete.
-361662 bytes received in 2.5 seconds (1.4e+02 Kbytes/s)
-ftp> quit
-@b{shell%}
-@end group
-@end smallexample
-
-The full set of options to @value{PRODUCT} @code{FTP} are discussed
-in the Reference section of this manual.  (@pxref{FTP Reference})
-
-@node rsh, rcp, FTP, Kerberos V5 Applications
-@subsection rsh
-
-The @value{PRODUCT} @code{rsh} program works exactly like the standard
-UNIX rlogin program, with the following Kerberos features added:
-
-@table @kbd
-@itemx -f
-forwards a copy of your tickets to the remote host.
-
-@itemx -F
-forwards a copy of your tickets to the remote host, and marks them
-re-forwardable from the remote host.
-
-@itemx -k @i{realm}
-requests tickets for the remote host in the specified realm, instead of
-determining the realm itself.
-
-@itemx -x
-encrypts the input and output data streams (the command line is not encrypted)
-
-@end table
-
-@need 1800
-For example, if your Kerberos tickets allowed you to run programs on the
-host @* @code{@value{RANDOMHOST2}@@@value{SECONDDOMAIN}} as root, you could
-run the @samp{date} program as follows:
-
-@smallexample
-@group
-@b{shell%} rsh @value{RANDOMHOST2}.@value{SECONDDOMAIN} -l root -x date
-@b{This rsh session is using DES encryption for all data transmissions.
-Tue Jul 30 19:34:21 EDT 2002
-shell%}
-@end group
-@end smallexample
-
-If you forwarded your Kerberos tickets, @code{rsh} automatically
-destroys them when it exits.  The full set of options to @value{PRODUCT}
-@code{rsh} are discussed in the Reference section of this manual.
-(@pxref{rsh Reference})
-
-@node rcp, ksu, rsh, Kerberos V5 Applications
-@subsection rcp
-
-@need 1000
-The @value{PRODUCT} @code{rcp} program works exactly like the standard
-UNIX rcp program, with the following Kerberos features added:
-
-@table @kbd
-@itemx -k @i{realm}
-requests tickets for the remote host in the specified realm, instead of
-determining the realm itself.
-
-@itemx -x
-turns on encryption.
-@end table
-
-
-@need 1500
-For example, if you wanted to copy the file @code{/etc/motd} from the
-host @code{@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}} into the current
-directory, via an encrypted connection, you would simply type:
-
-@smallexample
-@b{shell%} rcp -x @value{RANDOMHOST1}.@value{PRIMARYDOMAIN}:/etc/motd .
-@end smallexample
-
-The @kbd{rcp} program negotiates authentication and encryption
-transparently.  The full set of options to @value{PRODUCT} @code{rcp}
-are discussed in the Reference section of this manual.  (@pxref{rcp
-Reference})
-
-@node ksu,  , rcp, Kerberos V5 Applications
-@subsection ksu
-
-The @value{PRODUCT} @code{ksu} program replaces the standard UNIX su
-program.  @code{ksu} first authenticates you to Kerberos.  Depending on
-the configuration of your system, @code{ksu} may ask for your Kerberos
-password if authentication fails.  @emph{Note that you should never type
-your password if you are remotely logged in using an unencrypted
-connection.}
-
-Once @code{ksu} has authenticated you, if your Kerberos principal
-appears in the target's @code{.k5login} file (@pxref{Granting Access to
-Your Account}) or in the target's @code{.k5users} file (see below), it
-switches your user ID to the target user ID.
-
-@need 2000
-For example, @code{@value{RANDOMUSER2}} has put
-@code{@value{RANDOMUSER1}}'s Kerberos principal in his @code{.k5login}
-file.  If @code{@value{RANDOMUSER1}} uses @code{ksu} to become
-@code{@value{RANDOMUSER2}}, the exchange would look like this.  (To
-differentiate between the two shells, @code{@value{RANDOMUSER1}}'s
-prompt is represented as @code{@value{RANDOMUSER1}%} and
-@code{@value{RANDOMUSER2}}'s prompt is represented as
-@code{@value{RANDOMUSER2}%}.)
-
-@smallexample
-@group
-@b{@value{RANDOMUSER1}%} ksu @value{RANDOMUSER2}
-@b{Account @value{RANDOMUSER2}: authorization for @value{RANDOMUSER1}@@@value{PRIMARYREALM} successful
-Changing uid to @value{RANDOMUSER2} (3382)
-@value{RANDOMUSER2}%}
-@end group
-@end smallexample
-
-@noindent
-Note that the new shell has a copy of @code{@value{RANDOMUSER1}}'s
-tickets.  The ticket filename contains @code{@value{RANDOMUSER2}}'s UID
-with @samp{.1} appended to it:
-
-@smallexample
-@group
-@b{@value{RANDOMUSER2}%} klist
-@b{Ticket cache: /tmp/krb5cc_3382.1
-Default principal: @value{RANDOMUSER1}@@@value{PRIMARYREALM}
-
-Valid starting      Expires             Service principal
-07/31/04 21:53:01  08/01/04 07:52:53  krbtgt/@value{PRIMARYREALM}@@@value{PRIMARYREALM}
-07/31/04 21:53:39  08/01/04 07:52:53  host/@value{RANDOMHOST1}.@value{PRIMARYDOMAIN}@@@value{PRIMARYREALM}
-@value{RANDOMUSER2}%}
-@end group
-@end smallexample
-
-@need 2500
-If @code{@value{RANDOMUSER1}} had not appeared in
-@code{@value{RANDOMUSER2}}'s @code{.k5login} file (and the system was
-configured to ask for a password), the exchange would have looked like
-this (assuming @code{@value{RANDOMUSER2}} has taken appropriate
-precautions in protecting his password):
-
-@smallexample
-@group
-@b{@value{RANDOMUSER1}%} ksu @value{RANDOMUSER2}
-@b{WARNING: Your password may be exposed if you enter it here and are logged 
-         in remotely using an unsecure (non-encrypted) channel. 
-Kerberos password for @value{RANDOMUSER2}@@@value{PRIMARYREALM}:}  @i{<-  @code{@value{RANDOMUSER1}} types the wrong password here.}
-@b{ksu: Password incorrect
-Authentication failed.
-@value{RANDOMUSER1}%}
-@end group
-@end smallexample
-
-Now, suppose @code{@value{RANDOMUSER2}} did not want to give
-@code{@value{RANDOMUSER1}} full access to his account, but wanted to
-give her permission to list his files and use the "more" command to view
-them.  He could create a @code{.k5users} file giving her permission to
-run only those specific commands.
-
-@need 3500
-The @code{.k5users} file is like the @code{.k5login} file, except that
-each principal is optionally followed by a list of commands.  @code{ksu}
-will let those principals execute only the commands listed, using the
-@kbd{-e} option.  @code{@value{RANDOMUSER2}}'s @code{.k5users} file
-might look like the following:
-
-@smallexample
-@group
-@value{RANDOMUSER1}@@@value{PRIMARYREALM}       /bin/ls /usr/bin/more
-@value{ADMINUSER}@@@value{PRIMARYREALM}         /bin/ls
-@value{ADMINUSER}/admin@@@value{PRIMARYREALM}   *
-@value{RANDOMUSER2}@@@value{SECONDREALM}
-@end group
-@end smallexample
-
-@noindent The above @code{.k5users} file would let
-@code{@value{RANDOMUSER1}} run only the commands @code{/bin/ls} and
-@code{/usr/bin/more}.  It would let @code{@value{ADMINUSER}} run only
-the command @code{/bin/ls} if he had regular tickets, but if he had
-tickets for his @code{admin} instance,
-@code{@value{ADMINUSER}/admin@@@value{PRIMARYREALM}}, he would be able
-to execute any command.  The last line gives @code{@value{RANDOMUSER2}}
-in the realm @value{SECONDREALM} permission to execute any command.
-(@i{I.e.}, having only a Kerberos principal on a line is equivalent to
-giving that principal permission to execute @code{*}.)  This is so that
-@value{RANDOMUSER2} can allow himself to execute commands when he logs
-in, using Kerberos, from a machine in the realm @value{SECONDREALM}.
-
-@need 2500
-Then, when @code{@value{RANDOMUSER1}} wanted to list his home directory,
-she would type:
-
-@smallexample
-@group
-@b{@value{RANDOMUSER1}%} ksu @value{RANDOMUSER2} -e ls ~@value{RANDOMUSER2}
-@b{Authenticated @value{RANDOMUSER1}@@@value{PRIMARYREALM}
-Account @value{RANDOMUSER2}: authorization for @value{RANDOMUSER1}@@@value{PRIMARYREALM} for execution of
-               /bin/ls successful
-Changing uid to @value{RANDOMUSER2} (3382)
-Mail            News            Personal        misc            bin
-@value{RANDOMUSER1}%}
-@end group
-@end smallexample
-
-@noindent If @code{@value{RANDOMUSER1}} had tried to give a different
-command to @code{ksu}, it would have prompted for a password as with the
-previous example.
-
-Note that unless the @code{.k5users} file gives the target permission to
-run any command, the user must use @code{ksu} with the @kbd{-e}
-@i{command} option.
-
-@need 1000
-The @code{ksu} options you are most likely to use are:
-
-@table @kbd
-@itemx -n @i{principal}
-specifies which Kerberos principal you want to use for @code{ksu}.
-(@i{e.g.}, the user @code{@value{ADMINUSER}} might want to use his
-@code{admin} instance.  @xref{What is a Ticket?}.)
-
-@itemx -c
-specifies the location of your Kerberos credentials cache (ticket file).
-
-@itemx -k
-tells @code{ksu} not to destroy your Kerberos tickets when @code{ksu} is
-finished.
-
-@itemx -f
-requests forwardable tickets.  (@xref{Obtaining Tickets with kinit}.)  This
-is only applicable if @code{ksu} needs to obtain tickets.
-
-@itemx -l @i{lifetime}
-sets the ticket lifetime.  (@xref{Obtaining Tickets with kinit}.)  This is
-only applicable if @code{ksu} needs to obtain tickets.
-
-@itemx -z
-tells @code{ksu} to copy your Kerberos tickets only if the UID you are
-switching is the same as the Kerberos primary (either yours or the one
-specified by the @kbd{-n} option).
-
-@itemx -Z
-tells @code{ksu} not to copy any Kerberos tickets to the new UID.
-
-@itemx -e @i{command}
-tells @code{ksu} to execute @i{command} and then exit.  See the
-description of the @code{.k5users} file above.
-
-@itemx -a @i{text}
-(at the end of the command line) tells @code{ksu} to pass everything
-after @samp{-a} to the target shell.
-@end table
-
-The full set of options to @value{PRODUCT} @code{ksu} are discussed
-in the Reference section of this manual.  (@pxref{ksu Reference})
-
-@node Kerberos V5 Reference, Kerberos Glossary, Kerberos V5 Tutorial, Top
-@chapter Kerberos V5 Reference
-
-This section will include copies of the manual pages for the
-@value{PRODUCT} client programs.  You can read the manual entry for any
-command by typing @code{man} @i{command}, where @i{command} is the name
-of the command for which you want to read the manual entry.  For
-example, to read the @code{kinit} manual entry, you would type:
-
-@smallexample
-@b{shell%} man kinit
-@end smallexample
-
-Note:  To be able to view the @value{PRODUCT} manual pages on line, you
-may need to add the directory @code{@value{ROOTDIR}/man} to your MANPATH
-environment variable.  (Remember to replace @code{@value{ROOTDIR}} with
-the top-level directory in which @value{PRODUCT} is installed.)  For
-example, if you had the the following line in your @code{.login}
-file@footnote{The MANPATH variable may be specified in a different
-initialization file, depending on your operating system.  Some of the
-files in which you might specify environment variables include
-@code{.login}, @code{.profile}, or @code{.cshrc}.}:
-
-@smallexample
-setenv MANPATH /usr/local/man:/usr/man
-@end smallexample
-
-@noindent
-and the @value{PRODUCT} man pages were in the directory
-@code{/usr/@value{LCPRODUCT}/man}, you would change the line to the following:
-
-@smallexample
-setenv MANPATH /usr/@value{LCPRODUCT}/man:/usr/local/man:/usr/man
-@end smallexample
-
-@ifinfo
-Note to info users:  the manual pages are not available within this info
-tree.  You can read them from emacs with the command:
-
-@smallexample
-M-x manual-entry @emph{command}
-@end smallexample
-@end ifinfo
-
-@page
-
-@menu
-* kinit Reference::             
-* klist Reference::             
-* ksu Reference::               
-* kdestroy Reference::          
-* kpasswd Reference::           
-* telnet Reference::            
-* FTP Reference::               
-* rlogin Reference::            
-* rsh Reference::               
-* rcp Reference::               
-@end menu
-
-@node kinit Reference, klist Reference, Kerberos V5 Reference, Kerberos V5 Reference
-@section kinit Reference
-
-@iftex
-@special{psfile=kinit1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{kinit}}
-@page
-
-@special{psfile=kinit2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{kinit}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry kinit} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="kinit.html"> kinit manpage</a>
-@end html
-@end ifhtml
-
-@node klist Reference, ksu Reference, kinit Reference, Kerberos V5 Reference
-@section klist Reference
-
-@iftex
-@special{psfile=klist1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{klist}}
-@page
-@end iftex
-
-@iftex
-@special{psfile=klist2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{klist}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry klist} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="klist.html"> klist manpage</a>
-@end html
-@end ifhtml
-
-@node ksu Reference, kdestroy Reference, klist Reference, Kerberos V5 Reference
-@section ksu Reference
-
-@iftex
-@special{psfile=ksu1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{ksu}}
-@page
-
-@special{psfile=ksu2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{ksu}}
-@page
-
-@special{psfile=ksu3.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{ksu}}
-@page
-
-@special{psfile=ksu4.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{ksu}}
-@page
-
-@special{psfile=ksu5.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{ksu}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry ksu} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="ksu.html"> ksu manpage</a>
-@end html
-@end ifhtml
-
-@node kdestroy Reference, kpasswd Reference, ksu Reference, Kerberos V5 Reference
-@section kdestroy Reference
-
-@iftex
-@special{psfile=kdestroy1.ps voffset=-700 hoffset=-60}
-@centerline{Reference Manual for @code{kdestroy}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry kdestroy} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="kdestroy.html"> kdestroy manpage</a>
-@end html
-@end ifhtml
-
-@node kpasswd Reference, telnet Reference, kdestroy Reference, Kerberos V5 Reference
-@section kpasswd Reference
-
-@iftex
-@special{psfile=kpasswd1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{kpasswd}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry kpasswd} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="kpasswd.html"> kpasswd manpage</a>
-@end html
-@end ifhtml
-
-@node telnet Reference, FTP Reference, kpasswd Reference, Kerberos V5 Reference
-@section telnet Reference
-
-@iftex
-@special{psfile=telnet1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet3.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet4.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet5.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet6.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet7.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet8.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-
-@special{psfile=telnet9.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{telnet}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry telnet} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="telnet.html"> telnet manpage</a>
-@end html
-@end ifhtml
-
-@node FTP Reference, rlogin Reference, telnet Reference, Kerberos V5 Reference
-@section FTP Reference
-
-@iftex
-@special{psfile=ftp1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp3.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp4.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp5.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp6.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp7.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp8.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-
-@special{psfile=ftp9.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{FTP}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry FTP} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="ftp.html"> ftp manpage</a>
-@end html
-@end ifhtml
-
-@node rlogin Reference, rsh Reference, FTP Reference, Kerberos V5 Reference
-@section rlogin Reference
-
-@iftex
-@special{psfile=rlogin1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{rlogin}}
-@page
-
-@special{psfile=rlogin2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{rlogin}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry rlogin} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="rlogin.html"> rlogin manpage</a>
-@end html
-@end ifhtml
-
-@node rsh Reference, rcp Reference, rlogin Reference, Kerberos V5 Reference
-@section rsh Reference
-
-@iftex
-@special{psfile=rsh1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{rsh}}
-@page
-
-@special{psfile=rsh2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{rsh}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry rsh} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="rsh.html"> rsh manpage</a>
-@end html
-@end ifhtml
-
-@node rcp Reference,  , rsh Reference, Kerberos V5 Reference
-@section rcp Reference
-
-@iftex
-@special{psfile=rcp1.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{rcp}}
-@page
-@end iftex
-
-@iftex
-@special{psfile=rcp2.ps voffset=-700 hoffset=-40}
-@centerline{Reference Manual for @code{rcp}}
-@page
-@end iftex
-
-@ifinfo
-Type @kbd{M-x manual-entry rcp} to read this manual page.
-@end ifinfo
-
-@ifhtml
-@html
-<a href="rcp.html"> rcp manpage</a>
-@end html
-@end ifhtml
-
-@node Kerberos Glossary, Copyright, Kerberos V5 Reference, Top
-@appendix Kerberos Glossary
-
-@include glossary.texinfo
-
-@node Copyright,  , Kerberos Glossary, Top
-@appendix Copyright
-
-@include copyright.texinfo
-
-@contents
-@bye