path: root/doc/sftp.dox

/**
@page libssh_tutor_sftp Chapter 5: The SFTP subsystem
@section sftp_subsystem The SFTP subsystem

SFTP stands for "Secure File Transfer Protocol". It enables you to safely
transfer files between the local and the remote computer. It reminds a lot
of the old FTP protocol.

SFTP is a rich protocol. It lets you do over the network almost everything
that you can do with local files:
  - send files
  - modify only a portion of a file
  - receive files
  - receive only a portion of a file
  - get file owner and group
  - get file permissions
  - set file owner and group
  - set file permissions
  - remove files
  - rename files
  - create a directory
  - remove a directory
  - retrieve the list of files in a directory
  - get the target of a symbolic link
  - create symbolic links
  - get information about mounted filesystems.

The current implemented version of the SFTP protocol is version 3. All functions
aren't implemented yet, but the most important are.


@subsection sftp_session Opening and closing a SFTP session

Unlike with remote shells and remote commands, when you use the SFTP subsystem,
you don't handle directly the SSH channels. Instead, you open a "SFTP session".

The function sftp_new() creates a new SFTP session. The function sftp_init()
initializes it. The function sftp_free() deletes it.

As you see, all the SFTP-related functions start with the "sftp_" prefix
instead of the usual "ssh_" prefix.

The example below shows how to use these functions:

@code
#include <libssh/sftp.h>

int sftp_helloworld(ssh_session session)
{
  sftp_session sftp;
  int rc;

  sftp = sftp_new(session);
  if (sftp == NULL)
  {
    fprintf(stderr, "Error allocating SFTP session: %s\n",
            ssh_get_error(session));
    return SSH_ERROR;
  }

  rc = sftp_init(sftp);
  if (rc != SSH_OK)
  {
    fprintf(stderr, "Error initializing SFTP session: %s.\n",
            sftp_get_error(sftp));
    sftp_free(sftp);
    return rc;
  }

  ...

  sftp_free(sftp);
  return SSH_OK;
}
@endcode


@subsection sftp_errors Analyzing SFTP errors

In case of a problem, the function sftp_get_error() returns a SFTP-specific
error number, in addition to the regular SSH error number returned by
ssh_get_error_number().

Possible errors are:
  - SSH_FX_OK: no error
  - SSH_FX_EOF: end-of-file encountered
  - SSH_FX_NO_SUCH_FILE: file does not exist
  - SSH_FX_PERMISSION_DENIED: permission denied
  - SSH_FX_FAILURE: generic failure
  - SSH_FX_BAD_MESSAGE: garbage received from server
  - SSH_FX_NO_CONNECTION: no connection has been set up
  - SSH_FX_CONNECTION_LOST: there was a connection, but we lost it
  - SSH_FX_OP_UNSUPPORTED: operation not supported by libssh yet
  - SSH_FX_INVALID_HANDLE: invalid file handle
  - SSH_FX_NO_SUCH_PATH: no such file or directory path exists
  - SSH_FX_FILE_ALREADY_EXISTS: an attempt to create an already existing file or directory has been made
  - SSH_FX_WRITE_PROTECT: write-protected filesystem
  - SSH_FX_NO_MEDIA: no media was in remote drive


@subsection sftp_mkdir Creating a directory

The function sftp_mkdir() tahes the "SFTP session" we juste created as
its first argument. It also needs the name of the file to create, and the
desired permissions. The permissions are the same as for the usual mkdir()
function. To get a comprehensive list of the available permissions, use the
"man 2 stat" command. The desired permissions are combined with the remote
user's mask to determine the effective permissions.

The code below creates a directory named "helloworld" in the current directory that
can be read and written only by its owner:

@code
#include <libssh/sftp.h>
#include <sys/stat.h>

int sftp_helloworld(ssh_session session, sftp_session sftp)
{
  int rc;

  rc = sftp_mkdir(sftp, "helloworld", S_IRWXU);
  if (rc != SSH_OK)
  {
    if (sftp_get_error(sftp) != SSH_FX_FILE_ALREADY_EXISTS)
    {
      fprintf(stderr, "Can't create directory: %s\n",
              ssh_get_error(session));
        return rc;
    }
  }

  ...

  return SSH_OK;
}
@endcode

Unlike its equivalent in the SCP subsystem, this function does NOT change the
current directory to the newly created subdirectory.


@subsection sftp_write Copying a file to the remote computer

You handle the contents of a remote file just like you would do with a
local file: you open the file in a given mode, move the file pointer in it,
read or write data, and close the file.

The sftp_open() function is very similar to the regular open() function,
excepted that it returns a file handle of type sftp_file. This file handle
is then used by the other file manipulation functions and remains valid
until you close the remote file with sftp_close().

The example below creates a new file named "helloworld.txt" in the
newly created "helloworld" directory. If the file already exists, it will
be truncated. It then writes the famous "Hello, World!" sentence to the
file, followed by a new line character. Finally, the file is closed:

@code
#include <libssh/sftp.h>
#include <sys/stat.h>
#include <fcntl.h>

int sftp_helloworld(ssh_session session, sftp_session sftp)
{
  int access_type = O_WRONLY | O_CREAT | O_TRUNC;
  sftp_file file;
  const char *helloworld = "Hello, World!\n";
  int length = strlen(helloworld);
  int rc, nwritten;

  ...

  file = sftp_open(sftp, "helloworld/helloworld.txt",
                   access_type, S_IRWXU);
  if (file == NULL)
  {
    fprintf(stderr, "Can't open file for writing: %s\n",
            ssh_get_error(session));
    return SSH_ERROR;
  }

  nwritten = sftp_write(file, helloworld, length);
  if (nwritten != length)
  {
    fprintf(stderr, "Can't write data to file: %s\n",
            ssh_get_error(session));
    sftp_close(file);
    return SSH_ERROR;
  }

  rc = sftp_close(file);
  if (rc != SSH_OK)
  {
    fprintf(stderr, "Can't close the written file: %s\n",
            ssh_get_error(session));
    return rc;
  }

  return SSH_OK;
}
@endcode


@subsection sftp_read Reading a file from the remote computer

The nice thing with reading a file over the network through SFTP is that it
can be done both in a synchronous way or an asynchronous way. If you read the file
asynchronously, your program can do something else while it waits for the
results to come.

Synchronous read is done with sftp_read().

Files are normally transferred in chunks. A good chunk size is 16 KB. The following
example transfers the remote file "/etc/profile" in 16 KB chunks. For each chunk we
request, sftp_read blocks till the data has been received:

@code
// Good chunk size
#define MAX_XFER_BUF_SIZE 16384

int sftp_read_sync(ssh_session session, sftp_session sftp)
{
  int access_type;
  sftp_file file;
  char buffer[MAX_XFER_BUF_SIZE];
  int nbytes, nwritten, rc;
  int fd;

  access_type = O_RDONLY;
  file = sftp_open(sftp, "/etc/profile",
                   access_type, 0);
  if (file == NULL) {
      fprintf(stderr, "Can't open file for reading: %s\n",
              ssh_get_error(session));
      return SSH_ERROR;
  }

  fd = open("/path/to/profile", O_CREAT);
  if (fd < 0) {
      fprintf(stderr, "Can't open file for writing: %s\n",
              strerror(errno));
      return SSH_ERROR;
  }

  for (;;) {
      nbytes = sftp_read(file, buffer, sizeof(buffer));
      if (nbytes == 0) {
          break; // EOF
      } else if (nbytes < 0) {
          fprintf(stderr, "Error while reading file: %s\n",
                  ssh_get_error(session));
          sftp_close(file);
          return SSH_ERROR;
      }

      nwritten = write(fd, buffer, nbytes);
      if (nwritten != nbytes) {
          fprintf(stderr, "Error writing: %s\n",
                  strerror(errno));
          sftp_close(file);
          return SSH_ERROR;
      }
  }

  rc = sftp_close(file);
  if (rc != SSH_OK) {
      fprintf(stderr, "Can't close the read file: %s\n",
              ssh_get_error(session));
      return rc;
  }

  return SSH_OK;
}
@endcode

Asynchronous read is done in two steps, first sftp_async_read_begin(), which
returns a "request handle", and then sftp_async_read(), which uses that request handle.
If the file has been opened in nonblocking mode, then sftp_async_read()
might return SSH_AGAIN, which means that the request hasn't completed yet
and that the function should be called again later on. Otherwise,
sftp_async_read() waits for the data to come. To open a file in nonblocking mode,
call sftp_file_set_nonblocking() right after you opened it. Default is blocking mode.

The example below reads a very big file in asynchronous, nonblocking, mode. Each
time the data is not ready yet, a counter is incremented.

@code
// Good chunk size
#define MAX_XFER_BUF_SIZE 16384

int sftp_read_async(ssh_session session, sftp_session sftp)
{
  int access_type;
  sftp_file file;
  char buffer[MAX_XFER_BUF_SIZE];
  int async_request;
  int nbytes;
  long counter;
  int rc;

  access_type = O_RDONLY;
  file = sftp_open(sftp, "some_very_big_file",
                   access_type, 0);
  if (file == NULL) {
    fprintf(stderr, "Can't open file for reading: %s\n",
                     ssh_get_error(session));
    return SSH_ERROR;
  }
  sftp_file_set_nonblocking(file);

  async_request = sftp_async_read_begin(file, sizeof(buffer));
  counter = 0L;
  usleep(10000);
  if (async_request >= 0) {
    nbytes = sftp_async_read(file, buffer, sizeof(buffer),
                             async_request);
  } else {
      nbytes = -1;
  }

  while (nbytes > 0 || nbytes == SSH_AGAIN) {
    if (nbytes > 0) {
      write(1, buffer, nbytes);
      async_request = sftp_async_read_begin(file, sizeof(buffer));
    } else {
        counter++;
    }
    usleep(10000);

    if (async_request >= 0) {
      nbytes = sftp_async_read(file, buffer, sizeof(buffer),
                               async_request);
    } else {
        nbytes = -1;
    }
  }

  if (nbytes < 0) {
    fprintf(stderr, "Error while reading file: %s\n",
            ssh_get_error(session));
    sftp_close(file);
    return SSH_ERROR;
  }

  printf("The counter has reached value: %ld\n", counter);

  rc = sftp_close(file);
  if (rc != SSH_OK) {
    fprintf(stderr, "Can't close the read file: %s\n",
            ssh_get_error(session));
    return rc;
  }

  return SSH_OK;
}
@endcode

@subsection sftp_ls Listing the contents of a directory

The functions sftp_opendir(), sftp_readdir(), sftp_dir_eof(),
and sftp_closedir() enable to list the contents of a directory. 
They use a new handle_type, "sftp_dir", which gives access to the
directory being read.

In addition, sftp_readdir() returns a "sftp_attributes" which is a pointer
to a structure with informations about a directory entry:
  - name: the name of the file or directory
  - size: its size in bytes
  - etc.

sftp_readdir() might return NULL under two conditions:
  - when the end of the directory has been met
  - when an error occured

To tell the difference, call sftp_dir_eof().

The attributes must be freed with sftp_attributes_free() when no longer
needed.

The following example reads the contents of some remote directory:

@code
int sftp_list_dir(ssh_session session, sftp_session sftp)
{
  sftp_dir dir;
  sftp_attributes attributes;
  int rc;

  dir = sftp_opendir(sftp, "/var/log");
  if (!dir)
  {
    fprintf(stderr, "Directory not opened: %s\n",
            ssh_get_error(session));
    return SSH_ERROR;
  }

  printf("Name                       Size Perms    Owner\tGroup\n");

  while ((attributes = sftp_readdir(sftp, dir)) != NULL)
  {
    printf("%-20s %10llu %.8o %s(%d)\t%s(%d)\n",
     attributes->name,
     (long long unsigned int) attributes->size,
     attributes->permissions,
     attributes->owner,
     attributes->uid,
     attributes->group,
     attributes->gid);

     sftp_attributes_free(attributes);
  }

  if (!sftp_dir_eof(dir))
  {
    fprintf(stderr, "Can't list directory: %s\n",
            ssh_get_error(session));
    sftp_closedir(dir);
    return SSH_ERROR;
  }

  rc = sftp_closedir(dir);
  if (rc != SSH_OK)
  {
    fprintf(stderr, "Can't close directory: %s\n",
            ssh_get_error(session));
    return rc;
  }
}
@endcode

*/