Add -x option to ldap tools when using openldap

We have many scripts that use ldapsearch, ldapmodify, etc.  All of these
currently use simple auth.  When using the openldap versions of these
scripts, we have to pass the -x argument to use simple auth.  A new
configure parameter ldaptool_opts is used to pass this down into the
scripts.
Reviewed by: nkinder (Thanks!)
Platforms tested: Fedora 14 (rawhide)

1 files changed, 44 insertions, 60 deletions

diff --git a/missing b/missing
index 28055d2a..894e786e 100755
--- a/missing
+++ b/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2009-04-28.21; # UTC
+scriptversion=2005-06-08.21
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -18,7 +18,9 @@ scriptversion=2009-04-28.21; # UTC
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -31,8 +33,6 @@ if test $# -eq 0; then
 fi
 
 run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +44,7 @@ fi
 
 msg="missing on your system"
 
-case $1 in
+case "$1" in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -77,7 +77,6 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -87,9 +86,6 @@ Supported PROGRAM values:
   tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
-
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
     ;;
@@ -107,22 +103,15 @@ Send bug reports to <bug-automake@gnu.org>."
 
 esac
 
-# normalize program name to check for.
-program=`echo "$1" | sed '
-  s/^gnu-//; t
-  s/^gnu//; t
-  s/^g//; t'`
-
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
-# the program).  This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
-  lex*|yacc*)
+# the program).
+case "$1" in
+  lex|yacc)
     # Not GNU programs, they don't have --version.
     ;;
 
-  tar*)
+  tar)
     if test -n "$run"; then
        echo 1>&2 "ERROR: \`tar' requires --run"
        exit 1
@@ -146,7 +135,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case $program in
+case "$1" in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -156,7 +145,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch aclocal.m4
     ;;
 
-  autoconf*)
+  autoconf)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -165,7 +154,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch configure
     ;;
 
-  autoheader*)
+  autoheader)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -175,7 +164,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case $f in
+      case "$f" in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -195,7 +184,7 @@ WARNING: \`$1' is $msg.  You should only need it if
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te*)
+  autom4te)
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -203,8 +192,8 @@ WARNING: \`$1' is needed, but is $msg.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
     if test -f "$file"; then
 	touch $file
     else
@@ -218,78 +207,80 @@ WARNING: \`$1' is needed, but is $msg.
     fi
     ;;
 
-  bison*|yacc*)
+  bison|yacc)
     echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
+    if [ $# -ne 1 ]; then
         eval LASTARG="\${$#}"
-	case $LASTARG in
+	case "$LASTARG" in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
+	    if [ -f "$SRCFILE" ]; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
+	    if [ -f "$SRCFILE" ]; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if test ! -f y.tab.h; then
+    if [ ! -f y.tab.h ]; then
 	echo >y.tab.h
     fi
-    if test ! -f y.tab.c; then
+    if [ ! -f y.tab.c ]; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
 
-  lex*|flex*)
+  lex|flex)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if test $# -ne 1; then
+    if [ $# -ne 1 ]; then
         eval LASTARG="\${$#}"
-	case $LASTARG in
+	case "$LASTARG" in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
+	    if [ -f "$SRCFILE" ]; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if test ! -f lex.yy.c; then
+    if [ ! -f lex.yy.c ]; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
 
-  help2man*)
+  help2man)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
 	touch $file
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit $?
+	exit 1
     fi
     ;;
 
-  makeinfo*)
+  makeinfo)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -298,17 +289,11 @@ WARNING: \`$1' is $msg.  You should only need it if
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -318,7 +303,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     touch $file
     ;;
 
-  tar*)
+  tar)
     shift
 
     # We have already tried tar in the generic part.
@@ -332,13 +317,13 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case $firstarg in
+	case "$firstarg" in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case $firstarg in
+	case "$firstarg" in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0
@@ -371,6 +356,5 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
+# time-stamp-end: "$"
 # End: