Resolves: #237040

Summary: Remove obsolete makefiles

1 files changed, 0 insertions, 367 deletions

diff --git a/Makefile b/Makefile
deleted file mode 100644
index ec9118fa..00000000
--- a/Makefile
+++ /dev/null
@@ -1,367 +0,0 @@
-#
-# BEGIN COPYRIGHT BLOCK
-# This Program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License as published by the Free Software
-# Foundation; version 2 of the License.
-# 
-# This Program is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-# FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License along with
-# this Program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place, Suite 330, Boston, MA 02111-1307 USA.
-# 
-# In addition, as a special exception, Red Hat, Inc. gives You the additional
-# right to link the code of this Program with code not covered under the GNU
-# General Public License ("Non-GPL Code") and to distribute linked combinations
-# including the two, subject to the limitations in this paragraph. Non-GPL Code
-# permitted under this exception must only link to the code of this Program
-# through those well defined interfaces identified in the file named EXCEPTION
-# found in the source code files (the "Approved Interfaces"). The files of
-# Non-GPL Code may instantiate templates or use macros or inline functions from
-# the Approved Interfaces without causing the resulting work to be covered by
-# the GNU General Public License. Only Red Hat, Inc. may make changes or
-# additions to the list of Approved Interfaces. You must obey the GNU General
-# Public License in all respects for all of the Program code and other code used
-# in conjunction with the Program except the Non-GPL Code covered by this
-# exception. If you modify this file, you may extend this exception to your
-# version of the file, but you are not obligated to do so. If you do not wish to
-# provide this exception without modification, you must delete this exception
-# statement from your version and license this file solely under the GPL without
-# exception. 
-# 
-# 
-# Copyright (C) 2001 Sun Microsystems, Inc. Used by permission.
-# Copyright (C) 2005 Red Hat, Inc.
-# All rights reserved.
-# END COPYRIGHT BLOCK
-# 
-# Top-level gmake Makefile for LDAP Server builds.
-#
-# Execute the command:
-#
-#       gmake help
-#
-# to see a list of available targets.
-
-# Relative path to the top of the build tree (i.e., where the DS source tree is checked out)
-BUILD_ROOT=.
-
-# define COMPONENT_DEPS here so that components are pulled in this makefile
-COMPONENT_DEPS := 1
-
-include nsdefs.mk
-include nsconfig.mk
-
-# first (default) rule: build and create a DS package
-all:	buildAndPkgDirectory
-
-help:
-	@echo
-	@echo The following are build targets that you can choose from:
-	@echo
-	@echo "   gmake buildAndPkgDirectory"
-	@echo "   gmake buildDirectory"
-	@echo "   gmake pkgDirectory"
-	@echo "   gmake pkgDirectoryl10n"
-	@echo "   gmake pkgDirectoryPseudoL10n"
-	@echo "   gmake with no arguments will do buildAndPkgDirectory, which "
-	@echo "         is usually what you want to do"
-	@echo ""
-	@echo "   The following are optional build flags which build or pull in"
-	@echo "   optional components which are only available internally for"
-	@echo "   now.  In the future these components may be made available"
-	@echo "   externally or in an open source version."
-	@echo "   USE_ADMINSERVER=1 - bundle the Admin Server (required to run Console/webapps)"
-	@echo "   USE_CONSOLE=1     - bundle the Administration Console (requires Java)"
-	@echo "   USE_DSMLGW=1      - build/bundle the DSMLv2 Gateway (requires Java)"
-	@echo "   USE_ORGCHART=1    - build/bundle the Org Chart webapp"
-	@echo "   USE_DSGW=1        - build/bundle the Phonebook/DS Gateway webapp"
-	@echo "   USE_JAVATOOLS=1   - build/bundle the Java command line tools"
-	@echo "   USE_SETUPUTIL=1    - build/bundle programs that use Setuputil"
-
-###### Implementation notes:
-#
-# We use ../reltools/ftp_puller_new.pl to pull and maintain dependencies
-# for the components (binary and header files) we use for the build.  The
-# dependencies are maintained in the file ../components.OS, where OS is
-# the operating system.  These files do not exist in CVS; they are created
-# as needed.  We could probably make the system smarter to know the
-# difference between debug/optimized and export/domestic, but for now it
-# does not. 
-#
-# The file ./component_versions.mk contains the component version
-# information.  If you want to change the version of a component used
-# to build or package, this is the place to look.
-#
-#
-# The file ./components.mk contains the information about what files and
-# directories are used by the component.  It also contains the
-# information about how to pull the component.  Each component defines a
-# XXX_DEP macro which is the name of a file to be used for dependency
-# checking.
-#
-#
-# By default, NT uses FTP and Unix uses SYMLINK as their pull methods.
-# This is controlled by the COMPONENT_PULL_METHOD macro.  For example,
-# on Unix, you can use
-#
-#     gmake COMPONENT_PULL_METHOD=FTP buildDirectory 
-#
-# To force use of ftp to pull all components.  In addition, each component
-# can have a XXX_PULL_METHOD macro.  If this macro is defined, it overrides
-# the default.  For example, on Unix, you can use
-#
-#     gmake NSPR_PULL_METHOD=FTP buildDirectory
-#
-# if you want to get NSPR via ftp and the other components via symlink.
-#
-#
-# By default, the components are only pulled from the top level if you do
-# a gmake buildDirectory.  There is a macro called COMPONENT_DEPS.  If
-# this is defined on the command line of the gmake command e.g.
-#
-#     gmake COMPONENT_DEPS=1 ... 
-#
-# this will force component checking and pulling.  This will have the
-# effect of slowing down the build.
-#
-###### End of implementation notes.
-
-ifeq ($(INTERNAL_BUILD), 1)
-# first list core dependencies
-  COMPONENT_DEPENDENCIES = $(NSPR_DEP) $(SECURITY_DEP) $(SVRCORE_DEP) $(LDAPSDK_DEP) \
-	$(ICU_DEP) $(DB_LIB_DEP) $(SASL_DEP) $(NETSNMP_DEP)
-# these are only for packaging
-  COMPONENT_DEPENDENCIES += $(ADSYNC_DEP) $(NT4SYNC_DEP)
-ifeq ($(USE_PERLDAP), 1)
-  COMPONENT_DEPENDENCIES += $(PERLDAP_DEP)
-endif
-ifeq ($(USE_ADMINSERVER), 1)
-  COMPONENT_DEPENDENCIES += $(ADMINUTIL_DEP) $(DSDOC_DEP)
-endif
-ifeq ($(USE_SETUPUTIL), 1)
-  COMPONENT_DEPENDENCIES += $(SETUPUTIL_DEP)
-endif
-ifeq ($(USE_DSMLGW), 1)
-  COMPONENT_DEPENDENCIES += $(AXIS_DEP) $(DSMLJAR_DEP)
-endif
-endif
-
-components: $(COMPONENT_DEPENDENCIES)
-	-@echo "The components are up to date"
-
-ifeq ($(BUILD_JAVA_CODE),1)
-DS_CONSOLE_COMPONENT_DEP  = $(LDAPJDK_DEP) $(LDAPCONSOLE_DEP)
-DS_CONSOLE_COMPONENT_DEP += $(JAVASSL_DEP) $(JSS_DEP) $(CRIMSONJAR_DEP)
-java_platform_check:
-
-else
-
-DS_CONSOLE_COMPONENT_DEP  =
-java_platform_check:
-	-@echo "Note: Java code is not built on this platform ($(ARCH))."
-	-@echo "      Use 'gmake BUILD_JAVA_CODE=1 ...' to override."
-endif
-
-consoleComponents: $(DS_CONSOLE_COMPONENT_DEP)
-
-buildnum:
-	if test ! -d $(BUILD_ARCH); then mkdir $(BUILD_ARCH); fi;
-	$(PERL) buildnum.pl -p $(BUILD_ARCH)
-
-nsCommon:
-	cd config;		$(MAKE) export $(NSDEFS)
-# XXXsspitzer:  for UNIXWARE and UnixWare
-ifeq ($(subst nix,NIX,$(subst are,ARE,$(ARCH))), UNIXWARE)
-	- mkdir built/$(NS_BUILD_FLAVOR)/obj
-	cd built/$(NS_BUILD_FLAVOR)/obj && ar xv ../../../$(LIBNSPR) uxwrap.o
-endif
-ifeq ($(ARCH), WINNT)
-	cd lib/libnt;	$(MAKE) $(MFLAGS) export $(NSDEFS)
-	cd lib/libnt;	$(MAKE) $(MFLAGS) libs $(NSDEFS)
-endif
-
-#
-# Notice that BUILD_MODULE is not supplied directly on this target.
-# It either inherits from the calling target or from the default in
-# nsdefs.mk.  Therefore if you need to perform 'gmake httpdlib', be sure
-# that BUILD_MODULE is set to whatever target release that you need.
-#
-httpdLib:
-	@echo 
-	@echo 
-	@echo 
-	@echo ==== Starting Server LIBS for: $(BUILD_MODULE) ==========
-	@echo
-	cd lib/base; 		$(MAKE) $(MFLAGS)
-	cd lib/ldaputil;	$(MAKE) $(MFLAGS)
-	cd lib/libaccess; 	$(MAKE) $(MFLAGS)
-	cd lib/libadmin; 	$(MAKE) $(MFLAGS)
-	cd lib/libsi18n; 	$(MAKE) $(MFLAGS)
-	@echo ==== Finished Server LIBS for: $(BUILD_MODULE) ==========
-	@echo 
-
-brandDirectory: $(RELTOOLSPATH)/brandver.pl
-	@echo ==== Branding LDAP Server ==========
-	$(PERL) $(RELTOOLSPATH)/brandver.pl -i branding/rhds/brandver.dat -s redhat-ds.spec
-	@echo ==== Finished Branding LDAP Server ==========
-
-versionDirectory: $(RELTOOLSPATH)/brandver.pl
-	@echo ==== Debranding LDAP Server ==========
-	$(PERL) $(RELTOOLSPATH)/brandver.pl -i branding/fedora/brandver.dat -s fedora-ds.spec
-	@echo ==== Finished Debranding LDAP Server ==========
-
-normalizeDirectory: $(RELTOOLSPATH)/brandver.pl
-	@echo ==== Normalizing LDAP Server ==========
-	$(PERL) $(RELTOOLSPATH)/brandver.pl -i branding/fedora/normalize.dat -s redhat-ds.spec
-	@echo ==== Normalizing Branding LDAP Server ==========
-
-buildAndPkgDirectory:	buildDirectory pkgDirectory
-
-buildDirectory: buildnum $(PUMPKIN_TARGET) $(OBJDIR) $(DIRVER_H) $(SDKVER_H) components 
-	@echo 
-	@echo 
-	@echo ==== Starting LDAP Server ==========
-	@echo
-	$(MAKE) $(MFLAGS) nsCommon
-	cd config;           $(MAKE) $(MFLAGS) install $(NSDEFS)
-	$(MAKE) $(MFLAGS) BUILD_MODULE=DIRECTORY LDAP_NO_LIBLCACHE=1 httpdLib
-ifeq ($(ARCH), WINNT)
-	$(PERL) ntversion.pl $(BUILD_ROOT) $(MAJOR_VERSION) $(MINOR_VERSION)
-endif
-	cd httpd/src; $(MAKE) $(MFLAGS) LDAP_NO_LIBLCACHE=1 BUILD_MODULE=DIRECTORY all
-	cd ldap; $(MAKE) $(MFLAGS) LDAP_NO_LIBLCACHE=1 BUILD_MODULE=DIRECTORY all
-	@echo ==== Finished LDAP Server ==========
-	@echo
-	@echo ==== Starting LDAP Server Clients ==========
-	@echo
-	$(MAKE) $(MFLAGS) buildDirectoryClients
-	@echo
-	@echo ==== Finished LDAP Server Clients ==========
-	@echo
-	@echo ==== Starting LDAP Server Console ==========
-	@echo
-	$(MAKE) $(MFLAGS) buildDirectoryConsole
-	@echo
-	@echo ==== Finished LDAP Server Console ==========
-	@echo
-
-cleanDirectory:
-	@echo
-	@echo
-	@echo ==== Cleaning LDAP Server on $(ARCH) ====
-	@echo
-	rm -rf $(ARCH)
-	rm -rf built/$(NS_BUILD_FLAVOR)
-	rm -rf built/release/slapd/$(NS_BUILD_FLAVOR)
-	rm -rf ../dist/$(NSOBJDIR_NAME)
-	rm -rf ../dist/full
-	rm -rf $(CLASS_DEST)	# ../dist/classes
-	@echo
-	@echo ==== All done ===
-	@echo
-
-buildDirectoryConsole: consoleComponents java_platform_check
-ifeq ($(BUILD_JAVA_CODE),1)
-#	cd ldap/admin/src/java/com/netscape/admin/dirserv; $(MAKE) $(MFLAGS) package
-    ifeq ($(USE_JAVATOOLS), 1)
-		cd ldap/admin/src/java/com/netscape/xmltools; $(MAKE) $(MFLAGS) package
-    endif
-endif
-
-buildDirectoryClients: $(ANT_DEP) java_platform_check
-ifeq ($(USE_DSGW), 1)
-	cd ldap/clients; $(MAKE) _dsgw
-endif
-ifeq ($(BUILD_JAVA_CODE),1)
-    ifeq ($(USE_DSMLGW), 1)
-		cd ldap/clients; $(MAKE) _dsmlgw
-    endif
-endif
-
-$(OBJDIR):
-	if test ! -d $(OBJDIR); then mkdir -p $(OBJDIR); fi;
-
-$(RELTOOLSPATH)/brandver.pl:
-	cd $(ABS_ROOT)/.. ; cvs co RelToolsLite
-
-$(SDKVER_H):
-	if test ! -d $(DIRVERDIR); then mkdir -p $(DIRVERDIR); fi;
-	$(PERL) dirver.pl -v "$(DIRSDK_VERSION)" -o $@
-
-$(DIRVER_H):
-	if test ! -d $(DIRVERDIR); then mkdir -p $(DIRVERDIR); fi;
-	$(PERL) dirver.pl -v "$(DIR_VERSION)" -o $@
-
-pkgLdapSDK: setupLdapSDK
-	@echo
-	@echo =========== Finished - LDAP SDK  Package Build ============
-
-setupLdapSDK:
-	@echo =========== Starting - LDAP SDK  Package Build ============
-	@echo	
-	cd ldap/cm; $(MAKE) $(MAKEFLAGS) releaseLdapSDK 
-	cd ldap/cm; $(MAKE) $(MAKEFLAGS) packageLdapSDK 
-
-
-pkgDirectory:	setupDirectory
-	@echo
-	@echo =========== Finished - LDAP Server Package Build ============
-
-Acceptance:
-	cd ldap/cm; $(MAKE) Acceptance $(MFLAGS)
-
-Longduration:
-	cd ldap/cm; $(MAKE) Longduration $(MFLAGS)
-
-releaseDirectory:
-	cd ldap/cm; $(MAKE) $(MFLAGS) releaseDirectory
-
-setupDirectory:
-	cd ldap/cm; $(MAKE) $(MFLAGS) releaseDirectory;
-	cd ldap/cm; $(MAKE) $(MFLAGS) packageDirectory;
-
-pkgDirectoryJars:
-	cd ldap/cm; $(MAKE) $(MFLAGS) packageJars 
-
-pkgDirectoryl10n:
-	@echo =========== Starting - LDAP Server International Package Build ============
-	cd ldap/cm; $(MAKE) $(MFLAGS) l10nRePackage
-	@echo =========== Finished - LDAP Server International Package Build ============
-
-pkgDirectoryPseudoL10n:
-	@echo =========== Starting - LDAP Server L10N Package Build ============
-ifeq ($(BUILD_SECURITY),export)
-ifeq ($(BUILD_DEBUG),optimize)
-	cd i18npkg/apollo; $(MAKE) $(MFLAGS)
-else
-	@echo skipping pkgDirectoryPseudoL10n
-endif
-else
-	@echo skipping pkgDirectoryPseudoL10n
-endif
-	@echo =========== Finished - LDAP Server L10N Package Build ============
-
-redhat-ds.spec: ldapserver.spec.tmpl branding/rhds/brandver.dat $(RELTOOLSPATH)/brandver.pl
-	sed -e s/@PLATFORM@/$(BUILD_ARCH)/g ldapserver.spec.tmpl > $@
-	$(RELTOOLSPATH)/brandver.pl -i branding/rhds/brandver.dat $@
-	mv $@ $(OBJDIR)
-
-ifdef INTERNAL_BUILD
-fedora-ds.spec: ldapserver.spec.tmpl branding/fedora/brandver.dat $(RELTOOLSPATH)/brandver.pl
-	sed -e s/@PLATFORM@/$(BUILD_ARCH)/g ldapserver.spec.tmpl > $@
-	$(RELTOOLSPATH)/brandver.pl -i branding/fedora/brandver.dat $@
-	mv $@ $(OBJDIR)
-else
-fedora-ds.spec: ldapserver.spec.tmpl
-	sed -e s/@PLATFORM@/$(BUILD_ARCH)/g \
-	-e 's/@COMPANY-PRODUCT-NAME@/Fedora Directory Server/g' \
-	-e 's/@LCASE-COMPANY-NAME-NOSP@/fedora/g' \
-	-e 's/@GEN-VERSION@/1.0/g' \
-	-e 's/@NOSP-VERSION@/1.0.4/g' \
-	-e 's+@COMPANY-URL@+http://directory.fedora.redhat.com/+g' \
-	ldapserver.spec.tmpl > $@
-	mv $@ $(OBJDIR)
-endif # INTERNAL_BUILD