build: standard directory layout

Suitable for mature project.

root   - administrative stuff
doc    - documents
src    - sources
tests  - tests
distro - distro specific files
sample - samples

SIDE EFFECT: many changes to rpm spec.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Acked-by: Adriaan de Jong <dejong@fox-it.com>
Signed-off-by: David Sommerseth <davids@redhat.com>

4 files changed, 813 insertions, 0 deletions

diff --git a/distro/rpm/Makefile.am b/distro/rpm/Makefile.am
new file mode 100644
index 0000000..536061d
--- /dev/null
+++ b/distro/rpm/Makefile.am
@@ -0,0 +1,18 @@
+#
+#  OpenVPN -- An application to securely tunnel IP networks
+#             over a single UDP port, with support for SSL/TLS-based
+#             session authentication and key exchange,
+#             packet encryption, packet authentication, and
+#             packet compression.
+#
+#  Copyright (C) 2002-2010 OpenVPN Technologies, Inc. <sales@openvpn.net>
+#  Copyright (C) 2006-2012 Alon Bar-Lev <alon.barlev@gmail.com>
+#
+
+MAINTAINERCLEANFILES = \
+	$(srcdir)/Makefile.in
+
+dist_noinst_DATA = \
+	openvpn.spec \
+	openvpn.init.d.rhel \
+	openvpn.init.d.suse
diff --git a/distro/rpm/openvpn.init.d.rhel b/distro/rpm/openvpn.init.d.rhel
new file mode 100755
index 0000000..821abd5
--- /dev/null
+++ b/distro/rpm/openvpn.init.d.rhel
@@ -0,0 +1,244 @@
+#!/bin/sh
+#
+# openvpn       This shell script takes care of starting and stopping
+#               openvpn on RedHat or other chkconfig-based system.
+#
+# chkconfig: 345 24 76
+#
+# description: OpenVPN is a robust and highly flexible tunneling application \
+#              that uses all of the encryption, authentication, and \
+#              certification features of the OpenSSL library to securely \
+#              tunnel IP networks over a single UDP port.
+#
+
+# Contributed to the OpenVPN project by
+# Douglas Keller <doug@voidstar.dyndns.org>
+# 2002.05.15
+
+# To install:
+#   copy this file to /etc/rc.d/init.d/openvpn
+#   shell> chkconfig --add openvpn
+#   shell> mkdir /etc/openvpn
+#   make .conf or .sh files in /etc/openvpn (see below)
+
+# To uninstall:
+#   run: chkconfig --del openvpn
+
+# Author's Notes:
+#
+# I have created an /etc/init.d init script and enhanced openvpn.spec to
+# automatically register the init script.  Once the RPM is installed you
+# can start and stop OpenVPN with "service openvpn start" and "service
+# openvpn stop".
+#
+# The init script does the following:
+#
+# - Starts an openvpn process for each .conf file it finds in
+#   /etc/openvpn.
+#
+# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
+#   it before starting openvpn (useful for doing openvpn --mktun...).
+#
+# - In addition to start/stop you can do:
+#
+#   service openvpn reload - SIGHUP
+#   service openvpn reopen - SIGUSR1
+#   service openvpn status - SIGUSR2
+#
+# Modifications:
+#
+# 2003.05.02
+#   * Changed == to = for sh compliance (Bishop Clark).
+#   * If condrestart|reload|reopen|status, check that we were
+#     actually started (James Yonan).
+#   * Added lock, piddir, and work variables (James Yonan).
+#   * If start is attempted twice, without an intervening stop, or
+#     if start is attempted when previous start was not properly
+#     shut down, then kill any previously started processes, before
+#     commencing new start operation (James Yonan).
+#   * Do a better job of flagging errors on start, and properly
+#     returning success or failure status to caller (James Yonan).
+#
+# 2005.04.04
+#   * Added openvpn-startup and openvpn-shutdown script calls
+#     (James Yonan).
+#
+
+# Location of openvpn binary
+openvpn=""
+openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
+for location in $openvpn_locations
+do
+  if [ -f "$location" ]
+  then
+    openvpn=$location
+  fi
+done
+
+# Lockfile
+lock="/var/lock/subsys/openvpn"
+
+# PID directory
+piddir="/var/run/openvpn"
+
+# Our working directory
+work=/etc/openvpn
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+if [ ${NETWORKING} = "no" ]
+then
+  echo "Networking is down"
+  exit 0
+fi
+
+# Check that binary exists
+if ! [ -f  $openvpn ] 
+then
+  echo "openvpn binary not found"
+  exit 0
+fi
+
+# See how we were called.
+case "$1" in
+  start)
+	echo -n $"Starting openvpn: "
+
+	/sbin/modprobe tun >/dev/null 2>&1
+
+	# From a security perspective, I think it makes
+	# sense to remove this, and have users who need
+	# it explictly enable in their --up scripts or
+	# firewall setups.
+
+	#echo 1 > /proc/sys/net/ipv4/ip_forward
+
+	# Run startup script, if defined
+	if [ -f $work/openvpn-startup ]; then
+	    $work/openvpn-startup
+	fi
+
+	if [ ! -d  $piddir ]; then
+	    mkdir $piddir
+	fi
+
+	if [ -f $lock ]; then
+	    # we were not shut down correctly
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	      if [ -s $pidf ]; then
+		kill `cat $pidf` >/dev/null 2>&1
+	      fi
+	      rm -f $pidf
+	    done
+	    rm -f $lock
+	    sleep 2
+	fi
+
+	rm -f $piddir/*.pid
+	cd $work
+
+	# Start every .conf in $work and run .sh if exists
+	errors=0
+	successes=0
+	for c in `/bin/ls *.conf 2>/dev/null`; do
+	    bn=${c%%.conf}
+	    if [ -f "$bn.sh" ]; then
+		. $bn.sh
+	    fi
+	    rm -f $piddir/$bn.pid
+	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
+	    if [ $? = 0 ]; then
+		successes=1
+	    else
+		errors=1
+	    fi
+	done
+
+	if [ $errors = 1 ]; then
+	    failure; echo
+	else
+	    success; echo
+	fi
+
+	if [ $successes = 1 ]; then
+	    touch $lock
+	fi
+	;;
+  stop)
+	echo -n $"Shutting down openvpn: "
+	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	  if [ -s $pidf ]; then
+	    kill `cat $pidf` >/dev/null 2>&1
+	  fi
+	  rm -f $pidf
+	done
+
+	# Run shutdown script, if defined
+	if [ -f $work/openvpn-shutdown ]; then
+	    $work/openvpn-shutdown
+	fi
+
+	success; echo
+	rm -f $lock
+	;;
+  restart)
+	$0 stop
+	sleep 2
+	$0 start
+	;;
+  reload)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -HUP `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+	;;
+  reopen)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR1 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+	;;
+  condrestart)
+	if [ -f $lock ]; then
+	    $0 stop
+	    # avoid race
+	    sleep 2
+	    $0 start
+	fi
+	;;
+  status)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR2 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	    echo "Status written to /var/log/messages"
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+        ;;
+  *)
+	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
+	exit 1
+	;;
+esac
+exit 0
diff --git a/distro/rpm/openvpn.init.d.suse b/distro/rpm/openvpn.init.d.suse
new file mode 100644
index 0000000..2bac7f3
--- /dev/null
+++ b/distro/rpm/openvpn.init.d.suse
@@ -0,0 +1,264 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:                     openvpn
+# Required-Start:               $network
+# Required-Stop:                $network
+# Default-Start:                3 5
+# Default-Stop:                 0 1 2 6
+# Short-Description:            This shell script takes care of starting and stopping OpenVPN.
+# Description:                  OpenVPN is a robust and highly flexible tunneling application that uses all of the encryption, authentication, and certification features of the OpenSSL library to securely tunnel IP networks over a single UDP port. 
+### END INIT INFO
+
+# Contributed to the OpenVPN project by
+# Douglas Keller <doug@voidstar.dyndns.org>
+# 2002.05.15
+
+# Modified for SuSE by
+# Frank Plohmann <openvpn@franks-planet.de>
+# 2003.08.24
+# Please feel free to contact me if you have problems or suggestions
+# using this script.
+
+# To install:
+#   copy this file to /etc/rc.d/init.d/openvpn
+#   use the runlevel editor in Yast to add it to runlevel 3 and/or 5
+#   shell> mkdir /etc/openvpn
+#   make .conf or .sh files in /etc/openvpn (see below)
+
+# To uninstall:
+#   use also Yast and the runlevel editor to uninstall
+
+# Author's Notes:
+#
+# I have created an /etc/init.d init script and enhanced openvpn.spec to
+# automatically register the init script.  Once the RPM is installed you
+# can start and stop OpenVPN with "service openvpn start" and "service
+# openvpn stop".
+#
+# The init script does the following:
+#
+# - Starts an openvpn process for each .conf file it finds in
+#   /etc/openvpn.
+#
+# - If /etc/openvpn/xxx.sh exists for a xxx.conf file then it executes
+#   it before starting openvpn (useful for doing openvpn --mktun...).
+#
+# - In addition to start/stop you can do:
+#
+#   /etc/init.d/openvpn reload - SIGHUP
+#   /etc/init.d/openvpn reopen - SIGUSR1
+#   /etc/init.d/openvpn status - SIGUSR2
+
+# Modifications 2003.05.02
+#   * Changed == to = for sh compliance (Bishop Clark).
+#   * If condrestart|reload|reopen|status, check that we were
+#     actually started (James Yonan).
+#   * Added lock, piddir, and work variables (James Yonan).
+#   * If start is attempted twice, without an intervening stop, or
+#     if start is attempted when previous start was not properly
+#     shut down, then kill any previously started processes, before
+#     commencing new start operation (James Yonan).
+#   * Do a better job of flagging errors on start, and properly
+#     returning success or failure status to caller (James Yonan).
+#
+# Modifications 2003.08.24
+#   * Converted the script for SuSE Linux distribution. 
+#	  Tested with version 8.2 (Frank Plohmann).
+#		- removed "chkconfig" header
+#		- added Yast header
+#		- changed installation notes
+#		- corrected path to openvpn binary
+#		- removes sourcing "functions"
+#		- removed sourcing "network"
+#		- removed network checking. it seemed not to work with SuSE.
+#		- added sourcing "rc.status", comments and "rc_reset" command
+#		- removed "succes; echo" and "failure; echo" lines
+#		- added "rc_status" lines at the end of each section
+#		- changed "service" to "/etc/init.d/" in "In addition to start/stop"
+#		  section above.
+#
+# Modifications 2005.04.04
+#   * Added openvpn-startup and openvpn-shutdown script calls (James Yonan).
+#
+
+# Location of openvpn binary
+openvpn="/usr/sbin/openvpn"
+
+# Lockfile
+lock="/var/lock/subsys/openvpn"
+
+# PID directory
+piddir="/var/run/openvpn"
+
+# Our working directory
+work=/etc/openvpn
+
+# Source rc functions
+. /etc/rc.status
+
+# Shell functions sourced from /etc/rc.status:
+#      rc_check         check and set local and overall rc status
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     ditto but be verbose in local rc status
+#      rc_status -v -r  ditto and clear the local rc status
+#      rc_failed        set local and overall rc status to failed
+#      rc_reset         clear local rc status (overall remains)
+#      rc_exit          exit appropriate to overall rc status
+
+#      rc_status        check and set local and overall rc status
+#      rc_status -v     ditto but be verbose in local rc status
+#      rc_status -v -r  ditto and clear the local rc status
+#      rc_failed        set local and overall rc status to failed
+#      rc_reset         clear local rc status (overall remains)
+#      rc_exit          exit appropriate to overall rc status
+
+# First reset status of this service
+rc_reset
+
+[ -f  $openvpn ] || exit 0
+
+# See how we were called.
+case "$1" in
+  start)
+	echo -n $"Starting openvpn: "
+
+	/sbin/modprobe tun >/dev/null 2>&1
+
+	# From a security perspective, I think it makes
+	# sense to remove this, and have users who need
+	# it explictly enable in their --up scripts or
+	# firewall setups.
+
+	#echo 1 > /proc/sys/net/ipv4/ip_forward
+
+	# Run startup script, if defined
+	if [ -f $work/openvpn-startup ]; then
+	    $work/openvpn-startup
+	fi
+
+	if [ ! -d  $piddir ]; then
+	    mkdir $piddir
+	fi
+
+	if [ -f $lock ]; then
+	    # we were not shut down correctly
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	      if [ -s $pidf ]; then
+		kill `cat $pidf` >/dev/null 2>&1
+	      fi
+	      rm -f $pidf
+	    done
+	    rm -f $lock
+	    sleep 2
+	fi
+
+	rm -f $piddir/*.pid
+	cd $work
+
+	# Start every .conf in $work and run .sh if exists
+	errors=0
+	successes=0
+	for c in `/bin/ls *.conf 2>/dev/null`; do
+	    bn=${c%%.conf}
+	    if [ -f "$bn.sh" ]; then
+		. $bn.sh
+	    fi
+	    rm -f $piddir/$bn.pid
+	    $openvpn --daemon --writepid $piddir/$bn.pid --config $c --cd $work
+	    if [ $? = 0 ]; then
+		successes=1
+	    else
+		errors=1
+	    fi
+	done
+
+	if [ $successes = 1 ]; then
+	    touch $lock
+	fi
+
+	rc_status -v
+	;;
+  stop)
+	echo -n $"Shutting down openvpn: "
+	for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+	  if [ -s $pidf ]; then
+	    kill `cat $pidf` >/dev/null 2>&1
+	  fi
+	  rm -f $pidf
+	done
+
+	# Run shutdown script, if defined
+	if [ -f $work/openvpn-shutdown ]; then
+	    $work/openvpn-shutdown
+	fi
+
+	rm -f $lock
+
+	rc_status -v
+	;;
+  restart)
+	$0 stop
+	sleep 2
+	$0 start
+
+	rc_status
+	;;
+  reload)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -HUP `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+
+	rc_status -v
+	;;
+  reopen)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR1 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+
+	rc_status -v
+	;;
+  condrestart)
+	if [ -f $lock ]; then
+	    $0 stop
+	    # avoid race
+	    sleep 2
+	    $0 start
+	fi
+
+	rc_status
+	;;
+  status)
+	if [ -f $lock ]; then
+	    for pidf in `/bin/ls $piddir/*.pid 2>/dev/null`; do
+		if [ -s $pidf ]; then
+		    kill -USR2 `cat $pidf` >/dev/null 2>&1
+		fi
+	    done
+	    echo "Status written to /var/log/messages"
+	else
+	    echo "openvpn: service not started"
+	    exit 1
+	fi
+
+	rc_status -v
+        ;;
+  *)
+	echo "Usage: openvpn {start|stop|restart|condrestart|reload|reopen|status}"
+	exit 1
+esac
+
+exit 0
diff --git a/distro/rpm/openvpn.spec.in b/distro/rpm/openvpn.spec.in
new file mode 100644
index 0000000..455f739
--- /dev/null
+++ b/distro/rpm/openvpn.spec.in
@@ -0,0 +1,287 @@
+# OpenVPN spec file, used to drive rpmbuild
+
+# OPTIONS
+#
+# Disable LZO
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_lzo 1'
+#
+# Disable PAM plugin
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'without_pam 1'
+#
+# Allow passwords to be read from files
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'with_password_save 1'
+#
+# Use this on RH9 and RHEL3
+#   rpmbuild -tb [openvpn.x.tar.gz] --define 'with_kerberos 1'
+
+Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+Name:           @PACKAGE@
+Version:        @VERSION@
+Release:	1
+URL:		http://openvpn.net/
+Source0:	http://prdownloads.sourceforge.net/openvpn/%{name}-%{version}.tar.gz
+
+License:	GPL
+Group:		Applications/Internet
+Vendor:		James Yonan <jim@yonan.net>
+Packager:	James Yonan <jim@yonan.net>
+BuildRoot:	%{_tmppath}/%{name}-%(id -un)
+
+#
+# Include dependencies manually
+#
+
+AutoReq: 0
+
+BuildRequires: openssl-devel >= 0.9.6
+Requires:      openssl       >= 0.9.6
+
+%if "%{_vendor}" == "Mandrakesoft"
+%{!?without_lzo:BuildRequires: liblzo1-devel >= 1.07}
+%{!?without_lzo:Requires:      liblzo1       >= 1.07}
+%else
+%if "%{_vendor}" == "MandrakeSoft"
+%{!?without_lzo:BuildRequires: liblzo1-devel >= 1.07}
+%{!?without_lzo:Requires:      liblzo1       >= 1.07}
+%else
+%{!?without_lzo:BuildRequires: lzo-devel >= 1.07}
+%{!?without_lzo:Requires:      lzo       >= 1.07}
+%endif
+%endif
+
+%{!?without_pam:BuildRequires: pam-devel}
+%{!?without_pam:Requires:      pam}
+
+%{!?with_pkcs11:BuildRequires: pkcs11-helper-devel}
+%{!?with_pkcs11:Requires:      pkcs11-helper}
+
+#
+# Description
+#
+
+%description
+OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+OpenVPN supports SSL/TLS security,
+ethernet bridging,
+TCP or UDP tunnel transport through proxies or NAT,
+support for dynamic IP addresses and DHCP,
+scalability to hundreds or thousands of users,
+and portability to most major OS platforms.
+
+%package devel
+Summary:	OpenVPN is a robust and highly flexible VPN daemon by James Yonan.
+Group:		Applications/Internet
+Requires:      %{name}
+%description devel
+Development support for OpenVPN.
+
+#
+# Define vendor type
+#
+
+%if "%{_vendor}" == "suse" || "%{_vendor}" == "pc"
+%define VENDOR SuSE
+%else
+%define VENDOR %_vendor
+%endif
+
+#
+# Should we build the auth-pam module?
+#
+
+%define build_auth_pam 1
+%{?without_pam:%define build_auth_pam 0}
+
+#
+# Other definitions
+#
+
+%define debug_package %{nil}
+
+#
+# Build OpenVPN binary
+#
+
+%prep
+%setup -q
+
+%build
+%configure \
+	--disable-dependency-tracking \
+	--docdir="%{_docdir}/%{name}-%{version}" \
+	%{?with_password_save:--enable-password-save} \
+	%{?without_lzo:--disable-lzo} \
+	%{?with_kerberos:--with-ssl-headers=/usr/kerberos/include}
+%__make
+
+# Build down-root plugin
+pushd src/plugins/down-root
+%__make
+popd
+
+# Build auth-pam plugin
+%if %{build_auth_pam}
+pushd src/plugins/auth-pam
+%__make
+popd
+%endif
+
+#
+# Installation section
+#
+
+%install
+[ %{buildroot} != "/" ] && rm -rf %{buildroot}
+%__make install DESTDIR="%{buildroot}"
+
+# Install init script
+%if "%{VENDOR}" == "SuSE"
+%__install -c -d -m 755 "%{buildroot}/etc/init.d"
+%__install -c -m 755 "distro/rpm/%{name}.init.d.suse"  "%{buildroot}/etc/init.d/%{name}"
+%else
+%__install -c -d -m 755 "%{buildroot}/etc/rc.d/init.d"
+%__install -c -m 755 distro/rpm/%{name}.init.d.rhel  "%{buildroot}/etc/rc.d/init.d/%{name}"
+%endif
+
+# Install /etc/openvpn
+%__install -c -d -m 755 "%{buildroot}/etc/%{name}"
+
+#
+# Build /usr/share/openvpn
+#
+
+%__mkdir_p %{buildroot}%{_datadir}/%{name}
+
+#
+# Install the plugins
+#
+
+%__mkdir_p "%{buildroot}%{_datadir}/%{name}/plugins/lib"
+
+for pi in auth-pam down-root; do
+  %__mv -f src/plugins/$pi/README src/plugins/README.$pi
+  if [ -e src/plugins/$pi/openvpn-$pi.so ]; then
+    %__install -c -m 755 src/plugins/$pi/openvpn-$pi.so "%{buildroot}%{_datadir}/openvpn/plugins/lib/openvpn-$pi.so"
+  fi
+done
+
+%__mv -f src/plugins/README src/plugins/README.plugins
+
+#
+# Clean section
+#
+
+%clean
+[ %{buildroot} != "/" ] && rm -rf "%{buildroot}"
+
+#
+# On Linux 2.4, make the device node
+#
+
+%post
+case "`uname -r`" in
+2.4*)
+	/bin/mkdir /dev/net >/dev/null 2>&1
+	/bin/mknod /dev/net/tun c 10 200 >/dev/null 2>&1
+	;;
+esac
+
+#
+# Handle the init script
+#
+
+/sbin/chkconfig --add %{name}
+%if "%{VENDOR}" == "SuSE"
+/etc/init.d/openvpn restart
+%else
+/sbin/service %{name} condrestart
+%endif
+%preun
+if [ "$1" = 0 ]
+then
+	%if "%{VENDOR}" == "SuSE"
+	/etc/init.d/openvpn stop
+	%else
+	/sbin/service %{name} stop
+	%endif
+	/sbin/chkconfig --del %{name}
+fi
+
+#
+# Files section
+#
+
+%files
+%defattr(-,root,root)
+%doc AUTHORS ChangeLog COPYING COPYRIGHT.GPL INSTALL NEWS PORTS README 
+%{_mandir}
+%{_sbindir}/%{name}
+%{_datadir}/%{name}
+%dir /etc/%{name}
+%if "%{VENDOR}" == "SuSE"
+/etc/init.d/%{name}
+%else
+/etc/rc.d/init.d/%{name}
+%endif
+
+# Install extra %doc stuff
+%doc contrib/ sample/ src/plugins/README.*
+
+%files devel
+%defattr(-,root,root)
+%{_includedir}/*
+
+%changelog
+* Thu Jul 30 2009 David Sommerseth <dazo@users.sourceforge.net>
+- Removed management/ directory from %doc
+
+* Thu Dec 14 2006 Alon Bar-Lev
+- Added with_pkcs11
+
+* Mon Aug 2 2005 James Yonan
+- Fixed build problem with --define 'without_pam 1'
+
+* Mon Apr 4 2005 James Yonan
+- Moved some files from /usr/share/openvpn to %doc for compatibility
+  with Dag Wieers' RPM repository
+
+* Sat Mar 12 2005 Tom Walsh
+- Added MandrakeSoft liblzo1 require
+
+* Fri Dec 10 2004 James Yonan
+- Added AutoReq: 0 for manual dependencies
+
+* Fri Dec 10 2004 James Yonan
+- Packaged the plugins
+
+* Sun Nov 7 2004 Umberto Nicoletti
+- SuSE support
+
+* Wed Aug 18 2004 Bishop Clark (LC957) <bishop@platypus.bc.ca>
+- restrict what we claim in /etc/ to avoid ownership conflicts
+
+* Sun Feb 23 2003 Matthias Andree <matthias.andree@gmx.de> 1.3.2.14-1.
+- Have the version number filled in by autoconf.
+
+* Wed Jul 10 2002 James Yonan <jim@yonan.net> 1.3.1-1
+- Fixed %preun to only remove service on final uninstall
+
+* Mon Jun 17 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.2.2-1
+- Added condrestart to openvpn.spec & openvpn.init.
+
+* Wed May 22 2002 James Yonan <jim@yonan.net> 1.2.0-1
+- Added mknod for Linux 2.4.
+
+* Wed May 15 2002 Doug Keller <dsk@voidstar.dyndns.org> 1.1.1.16-2
+- Added init scripts
+- Added conf file support
+
+* Mon May 13 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.14-1
+- Added new directories for config examples and such
+
+* Sun May 12 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.1.1.13-1
+- Updated buildroot directive and cleanup command
+- added easy-rsa utilities
+
+* Mon Mar 25 2002 bishop clark (LC957) <bishop@platypus.bc.ca> 1.0-1
+- Initial build.