summaryrefslogtreecommitdiffstats
path: root/drivers/serial/serial_pxa.c
blob: d5140045bfbb54ee0d790418fe07b7cbb4655343 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
/*
 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
 *
 * (C) Copyright 2002
 * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
 *
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Alex Zuepke <azu@sysgo.de>
 *
 * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <watchdog.h>
#include <serial.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/regs-uart.h>
#include <asm/io.h>
#include <linux/compiler.h>

DECLARE_GLOBAL_DATA_PTR;

/*
 * The numbering scheme differs here for PXA25x, PXA27x and PXA3xx so we can
 * easily handle enabling of clock.
 */
#ifdef	CONFIG_CPU_MONAHANS
#define	UART_CLK_BASE	CKENA_21_BTUART
#define	UART_CLK_REG	CKENA
#define	BTUART_INDEX	0
#define	FFUART_INDEX	1
#define	STUART_INDEX	2
#elif	CONFIG_CPU_PXA25X
#define	UART_CLK_BASE	(1 << 4)	/* HWUART */
#define	UART_CLK_REG	CKEN
#define	HWUART_INDEX	0
#define	STUART_INDEX	1
#define	FFUART_INDEX	2
#define	BTUART_INDEX	3
#else	/* PXA27x */
#define	UART_CLK_BASE	CKEN5_STUART
#define	UART_CLK_REG	CKEN
#define	STUART_INDEX	0
#define	FFUART_INDEX	1
#define	BTUART_INDEX	2
#endif

/*
 * Only PXA250 has HWUART, to avoid poluting the code with more macros,
 * artificially introduce this.
 */
#ifndef	CONFIG_CPU_PXA25X
#define	HWUART_INDEX	0xff
#endif

static uint32_t pxa_uart_get_baud_divider(void)
{
	if (gd->baudrate == 1200)
		return 768;
	else if (gd->baudrate == 9600)
		return 96;
	else if (gd->baudrate == 19200)
		return 48;
	else if (gd->baudrate == 38400)
		return 24;
	else if (gd->baudrate == 57600)
		return 16;
	else if (gd->baudrate == 115200)
		return 8;
	else	/* Unsupported baudrate */
		return 0;
}

static struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index)
{
	switch (uart_index) {
	case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE;
	case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE;
	case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE;
	case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE;
	default:
		return NULL;
	}
}

static void pxa_uart_toggle_clock(uint32_t uart_index, int enable)
{
	uint32_t clk_reg, clk_offset, reg;

	clk_reg = UART_CLK_REG;
	clk_offset = UART_CLK_BASE << uart_index;

	reg = readl(clk_reg);

	if (enable)
		reg |= clk_offset;
	else
		reg &= ~clk_offset;

	writel(reg, clk_reg);
}

/*
 * Enable clock and set baud rate, parity etc.
 */
void pxa_setbrg_dev(uint32_t uart_index)
{
	uint32_t divider = 0;
	struct pxa_uart_regs *uart_regs;

	divider = pxa_uart_get_baud_divider();
	if (!divider)
		hang();

	uart_regs = pxa_uart_index_to_regs(uart_index);
	if (!uart_regs)
		hang();

	pxa_uart_toggle_clock(uart_index, 1);

	/* Disable interrupts and FIFOs */
	writel(0, &uart_regs->ier);
	writel(0, &uart_regs->fcr);

	/* Set baud rate */
	writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, &uart_regs->lcr);
	writel(divider & 0xff, &uart_regs->dll);
	writel(divider >> 8, &uart_regs->dlh);
	writel(LCR_WLS0 | LCR_WLS1, &uart_regs->lcr);

	/* Enable UART */
	writel(IER_UUE, &uart_regs->ier);
}

/*
 * Initialise the serial port with the given baudrate. The settings
 * are always 8 data bits, no parity, 1 stop bit, no start bits.
 */
int pxa_init_dev(unsigned int uart_index)
{
	pxa_setbrg_dev (uart_index);
	return 0;
}

/*
 * Output a single byte to the serial port.
 */
void pxa_putc_dev(unsigned int uart_index, const char c)
{
	struct pxa_uart_regs *uart_regs;

	uart_regs = pxa_uart_index_to_regs(uart_index);
	if (!uart_regs)
		hang();

	while (!(readl(&uart_regs->lsr) & LSR_TEMT))
		WATCHDOG_RESET();
	writel(c, &uart_regs->thr);

	/* If \n, also do \r */
	if (c == '\n')
		pxa_putc_dev (uart_index,'\r');
}

/*
 * Read a single byte from the serial port. Returns 1 on success, 0
 * otherwise. When the function is succesfull, the character read is
 * written into its argument c.
 */
int pxa_tstc_dev(unsigned int uart_index)
{
	struct pxa_uart_regs *uart_regs;

	uart_regs = pxa_uart_index_to_regs(uart_index);
	if (!uart_regs)
		return -1;

	return readl(&uart_regs->lsr) & LSR_DR;
}

/*
 * Read a single byte from the serial port. Returns 1 on success, 0
 * otherwise. When the function is succesfull, the character read is
 * written into its argument c.
 */
int pxa_getc_dev(unsigned int uart_index)
{
	struct pxa_uart_regs *uart_regs;

	uart_regs = pxa_uart_index_to_regs(uart_index);
	if (!uart_regs)
		return -1;

	while (!(readl(&uart_regs->lsr) & LSR_DR))
		WATCHDOG_RESET();
	return readl(&uart_regs->rbr) & 0xff;
}

void pxa_puts_dev(unsigned int uart_index, const char *s)
{
	while (*s)
		pxa_putc_dev(uart_index, *s++);
}

#define	pxa_uart(uart, UART)						\
	int uart##_init(void)						\
	{								\
		return pxa_init_dev(UART##_INDEX);			\
	}								\
									\
	void uart##_setbrg(void)					\
	{								\
		return pxa_setbrg_dev(UART##_INDEX);			\
	}								\
									\
	void uart##_putc(const char c)					\
	{								\
		return pxa_putc_dev(UART##_INDEX, c);			\
	}								\
									\
	void uart##_puts(const char *s)					\
	{								\
		return pxa_puts_dev(UART##_INDEX, s);			\
	}								\
									\
	int uart##_getc(void)						\
	{								\
		return pxa_getc_dev(UART##_INDEX);			\
	}								\
									\
	int uart##_tstc(void)						\
	{								\
		return pxa_tstc_dev(UART##_INDEX);			\
	}								\

#define	pxa_uart_desc(uart)						\
	struct serial_device serial_##uart##_device =			\
	{								\
		.name	= "serial_"#uart,				\
		.start	= uart##_init,					\
		.stop	= NULL,						\
		.setbrg	= uart##_setbrg,				\
		.getc	= uart##_getc,					\
		.tstc	= uart##_tstc,					\
		.putc	= uart##_putc,					\
		.puts	= uart##_puts,					\
	};

#define	pxa_uart_multi(uart, UART)					\
	pxa_uart(uart, UART)						\
	pxa_uart_desc(uart)

#if defined(CONFIG_HWUART)
	pxa_uart_multi(hwuart, HWUART)
#endif
#if defined(CONFIG_STUART)
	pxa_uart_multi(stuart, STUART)
#endif
#if defined(CONFIG_FFUART)
	pxa_uart_multi(ffuart, FFUART)
#endif
#if defined(CONFIG_BTUART)
	pxa_uart_multi(btuart, BTUART)
#endif

__weak struct serial_device *default_serial_console(void)
{
#if CONFIG_CONS_INDEX == 1
	return &serial_hwuart_device;
#elif CONFIG_CONS_INDEX == 2
	return &serial_stuart_device;
#elif CONFIG_CONS_INDEX == 3
	return &serial_ffuart_device;
#elif CONFIG_CONS_INDEX == 4
	return &serial_btuart_device;
#else
#error "Bad CONFIG_CONS_INDEX."
#endif
}

void pxa_serial_initialize(void)
{
#if defined(CONFIG_FFUART)
	serial_register(&serial_ffuart_device);
#endif
#if defined(CONFIG_BTUART)
	serial_register(&serial_btuart_device);
#endif
#if defined(CONFIG_STUART)
	serial_register(&serial_stuart_device);
#endif
}