blob: ccffcf725736ed248860b6e078be5a88a9bf87ff (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
|
.. SPDX-License-Identifier: GPL-2.0+
imx8mp_evk
==========
U-Boot for the NXP i.MX8MP EVK board
Quick Start
-----------
- Build the ARM Trusted firmware binary
- Get the firmware-imx package
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
--------------------------------------
Note: $(srctree) is the U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_5.4.47_2.2.0
.. code-block:: bash
$ make PLAT=imx8mp bl31
$ cp build/imx8mp/release/bl31.bin $(srctree)
Get the ddr firmware
--------------------
.. code-block:: bash
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin
$ chmod +x firmware-imx-8.9.bin
$ ./firmware-imx-8.9.bin
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_1d_dmem.bin
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_1d_imem_201904.bin $(srctree)/lpddr4_pmu_train_1d_imem.bin
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_dmem_201904.bin $(srctree)/lpddr4_pmu_train_2d_dmem.bin
$ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4_pmu_train_2d_imem_201904.bin $(srctree)/lpddr4_pmu_train_2d_imem.bin
Build U-Boot
------------
.. code-block:: bash
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mp_evk_defconfig
$ export ATF_LOAD_ADDR=0x960000
$ make flash.bin
Burn the flash.bin to the MicroSD card at offset 32KB:
.. code-block:: bash
$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=32 conv=notrunc; sync
Boot
----
Set Boot switch to SD boot
Use /dev/ttyUSB2 for U-Boot console
|
