1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Author: Priyanka Jain <Priyanka.Jain@freescale.com>
*/
#include <common.h>
#include <command.h>
#include <linux/ctype.h>
#include <asm/io.h>
#include <stdio_dev.h>
#include <video_fb.h>
#include <fsl_diu_fb.h>
#include "../common/qixis.h"
#include "../common/diu_ch7301.h"
#include "t1040qds.h"
#include "t1040qds_qixis.h"
/*
* DIU Area Descriptor
*
* Note that we need to byte-swap the value before it's written to the AD
* register. So even though the registers don't look like they're in the same
* bit positions as they are on the MPC8610, the same value is written to the
* AD register on the MPC8610 and on the P1022.
*/
#define AD_BYTE_F 0x10000000
#define AD_ALPHA_C_SHIFT 25
#define AD_BLUE_C_SHIFT 23
#define AD_GREEN_C_SHIFT 21
#define AD_RED_C_SHIFT 19
#define AD_PIXEL_S_SHIFT 16
#define AD_COMP_3_SHIFT 12
#define AD_COMP_2_SHIFT 8
#define AD_COMP_1_SHIFT 4
#define AD_COMP_0_SHIFT 0
void diu_set_pixel_clock(unsigned int pixclock)
{
unsigned long speed_ccb, temp;
u32 pixval;
int ret = 0;
speed_ccb = get_bus_freq(0);
temp = 1000000000 / pixclock;
temp *= 1000;
pixval = speed_ccb / temp;
/* Program HDMI encoder */
/* Switch channel to DIU */
select_i2c_ch_pca9547(I2C_MUX_CH_DIU);
/* Set dispaly encoder */
ret = diu_set_dvi_encoder(temp);
if (ret) {
puts("Failed to set DVI encoder\n");
return;
}
/* Switch channel to default */
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
/* Program pixel clock */
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR,
((pixval << PXCK_BITS_START) & PXCK_MASK));
/* enable clock*/
out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK |
((pixval << PXCK_BITS_START) & PXCK_MASK));
}
int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
{
u32 pixel_format;
u8 sw;
/*Route I2C4 to DIU system as HSYNC/VSYNC*/
sw = QIXIS_READ(brdcfg[5]);
QIXIS_WRITE(brdcfg[5],
((sw & ~(BRDCFG5_IMX_MASK)) | (BRDCFG5_IMX_DIU)));
/*Configure Display ouput port as HDMI*/
sw = QIXIS_READ(brdcfg[15]);
QIXIS_WRITE(brdcfg[15],
((sw & ~(BRDCFG15_LCDPD_MASK | BRDCFG15_DIUSEL_MASK))
| (BRDCFG15_LCDPD_ENABLED | BRDCFG15_DIUSEL_HDMI)));
pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
(0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
(2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
(8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
(8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
printf("DIU: Switching to monitor @ %ux%u\n", xres, yres);
return fsl_diu_init(xres, yres, pixel_format, 0);
}
|
