summaryrefslogtreecommitdiffstats
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* board: presidio-asic: Add CAxxxx Ethernet supportAlex Nemirovsky2021-01-271-1/+14
| | | | | | | | Add CAxxxx Ethernet support for the Cortina Access Presidio Engineering Board Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Tom Rini <trini@konsulko.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini2021-01-252-1/+8
|\ | | | | | | | | | | | | | | - New Allwinner H616 SoC support (sans Ethernet & USB) - H6 DT update - Tanix TX6 TV box support - OrangePi 3 support - OrangePi Zero2 (H616) support
| * sunxi: Add support for H616 SoCJernej Skrabec2021-01-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | H616 is very similar to H6 so most of the infrastructure can be reused. However, two big differences are that it doesn't have functional SRAM A2 which is usually used for TF-A and it doesn't have ARISC co-processor. It also needs bigger SPL size - 48 KiB. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
| * sunxi: Introduce common symbol for H6 like SoCsJernej Skrabec2021-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that there are at least 2 other SoCs which have basically the same memory map, similar clocks and other features as H6. It's very likely that we'll see more such SoCs in the future. In order to ease porting to new SoCs and lower ifdef clutter, introduce common symbol for them. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* | Merge tag 'mips-pull-2021-01-24' of ↵Tom Rini2021-01-251-0/+46
|\ \ | |/ |/| | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-mips - MIPS: add support for Mediatek MT7620 SoCs
| * mips: mtmips: add support for MediaTek MT7620 SoCWeijie Gao2021-01-241-0/+46
| | | | | | | | | | | | | | | | This patch adds support for MediaTek MT7620 SoC. All files are dedicated for u-boot. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
* | Merge tag 'u-boot-imx-20210125' of ↵Tom Rini2021-01-258-185/+315
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx Changes for 2020.04 ------------------- - new board: Phytec phyCORE-i.MX8MP i.MX8MN Beacon EmbeddedWorks devkit - Fixes: several nanbcb fixes fix for imx8mm_beacon - further switch to distro boot commands - DM: DM Ether for MX6UL CI: https://gitlab.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6013
| * | imx: Add support for i.MX8MN Beacon EmbeddedWorks devkit.Adam Ford2021-01-231-0/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Beacon EmbeddedWorks is releasing a devkit based on the i.MX8M Nano SoC consisting of baseboard + SOM. The kit is based on the same design as the Beacon dev kit with the i.MX8M Mini. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * | imx8mq: configs: add support for distro boot commandsAlice Guo2021-01-231-63/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported boot device types in iMX8MQ: MMC, DHCP. CONFIG_DISTRO_DEFAULTS is added for enabling the DISTRO_DEFAULTS option. CONFIG_BOOTCOMMAND which is defined in include/configs/imx8mq_evk.h is deleted because "run distro_bootcmd" is required to be the default boot mode. scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be loaded to prior to execution. kernel_addr_r is the location in RAM where the kernel will be loaded to. Delete unnecessary environment variables because "run distro_bootcmd" is set to be the default boot mode. Signed-off-by: Alice Guo <alice.guo@nxp.com>
| * | board: phytec: imx8mp: Add PHYTEC phyCORE-i.MX8MP supportTeresa Remmet2021-01-231-0/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support PHYTEC phyCORE-i.MX8MP SOM. Supported features: - 2GB LPDDR4 RAM - eMMC - external SD - debug UART2 - watchdog Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Heiko Schocher <hs@denx.de>
| * | arm: dart6ul: enable DM_ETH for the dart6ulMarc Ferland2021-01-231-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts the dart6ul ethernet support to DM_ETH and cleans up the legacy ethernet code. The clean up, more specifically: * moves the fec2 node and pin definition to the carrier board DTS since the phy associated with it is on the carrier board and not on the SoM; * add the reset pin associated to each phy; * separate the ethernet, mdio and reset pins of each fec so that they are easier to reference; * add clock properties to the phy nodes since they are connected to the 50Mhz ENET[12]_TX_CLK clock of the SoC; * remove CONFIG_BOARD_EARLY_INIT_F since the function is now empty. Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
| * | imx: imx8mm-beacon: Remove relocation restrictionsAdam Ford2021-01-231-2/+0
| | | | | | | | | | | | | | | | | | | | | The system is capable of relocating RAM disks and the kernel. Remove these restrictions to prevent it. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | imx8mp: configs: add support for distro boot commandsAlice Guo2021-01-231-52/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported boot device types in iMX8MP: MMC. CONFIG_CMD_PART is added for command part and CONFIG_CMD_FS_GENERIC is for command fstype. scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be loaded to prior to execution. kernel_addr_r is the location in RAM where the kernel will be loaded to. Delete unnecessary environment variables because "run distro_bootcmd" is set to be the default boot mode. On the iMX8MP platform I used, "mmc1" represents SD card and "mmc2" represents eMMC. Signed-off-by: Alice Guo <alice.guo@nxp.com>
| * | imx8mm: configs: add support for distro boot commandsAlice Guo2021-01-231-52/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported boot device types in iMX8MM: MMC, DHCP. CONFIG_CMD_PART is added for command part and CONFIG_CMD_FS_GENERIC is for command fstype. CONFIG_BOOTCOMMAND which is defined in include/configs/imx8mm_evk.h is deleted because "run distro_bootcmd" is required to be the default boot mode. scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be loaded to prior to execution. kernel_addr_r is the location in RAM where the kernel will be loaded to. Delete unnecessary environment variables. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com>
| * | imx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFFPeng Fan2021-01-232-4/+0
| | | | | | | | | | | | | | | | | | | | | Drop CONFIG_SYS_[I,D]CACHE_OFF, it is safe to run with caches enabled on these platforms. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | imx: imx8mn_evk: correct stack/malloc adressPeng Fan2021-01-231-5/+2
| | | | | | | | | | | | | | | | | | | | | Move SP to end of OCRAM space. Drop MALLOC_F to make it alloc from stack space. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | imx: imx8mp_evk: enable eth supportPeng Fan2021-01-231-0/+16
| |/ | | | | | | | | | | | | Add board code to configure the network interface Add net defconfig Signed-off-by: Peng Fan <peng.fan@nxp.com>
* | Merge tag 'u-boot-atmel-2021.04-b' of ↵Tom Rini2021-01-251-5/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel features for 2021.04 cycle This feature set includes macb updates for all interfaces and new sama7g5 variant support; micrel ksz9031 DLL support; a new board from Giant based on Adafruit feather form factor which contains a SAMA5D27 SoC; several fixes regarding the NAND flash PMECC block; and pincontrol drive strength support for pio4 controller.
| * configs: sama5d27_som1_ek: Set FDT filename based on defconfigGreg Gallagher2021-01-221-5/+2
| | | | | | | | | | | | | | Make the FDT file name based on the default on that is specified in the defconfig file. Signed-off-by: Greg Gallagher <greg@embeddedgreg.com>
* | net: dwc_eth_qos: Pad descriptors to cacheline sizeMarek Vasut2021-01-191-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DWMAC4 IP has the possibility to skip up to 7 AXI bus width size words after the descriptor. Use this to pad the descriptors to cacheline size and remove the need for noncached memory altogether. Moreover, this lets Tegra use the generic cache flush / invalidate operations. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
* | aspeed: Add AST2600 platform supportChia-Wei, Wang2021-01-181-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | Add low level platform initialization for the AST2600 SoC. The 2-stage booting with U-Boot SPL are leveraged to support different booting mode. However, currently the patch supports only the booting from memory-mapped SPI flash. Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
* | board: presidio: Add Parallel NAND supportKate Liu2021-01-181-0/+9
|/ | | | | | | | | | | | Set environment for Nand flash (U-boot 2020.04): - add nand flash in the device tree - add new default configuration file for G3 using parallel Nand - set nand parameters in presidio_asic.h Signed-off-by: Kate Liu <kate.liu@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* riscv: Add Microchip MPFS Icicle Kit supportPadmarao Begari2021-01-181-39/+20
| | | | | | | | | | | | | This patch adds Microchip MPFS Icicle Kit support. For now, only NS16550 Serial, Microchip clock, Cadence eMMC and MACB drivers are enabled. The Microchip MPFS Icicle defconfig by default builds U-Boot for S-Mode because U-Boot on Microchip PolarFire SoC will run in S-Mode as payload of HSS + OpenSBI. Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
* riscv: timer: Add support for an early timerPragnesh Patel2021-01-183-0/+15
| | | | | | | | Added support for timer_early_get_count() and timer_early_get_rate() This is mostly useful in tracing. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
* riscv: Add support for SPI on Kendryte K210Sean Anderson2021-01-181-2/+5
| | | | | | | | | | | | | | | | This enables configs necessary for using SPI. The environment is saved to the very end of SPI flash. This is unlikely to be overwritten unless the entire flash is reprogrammed. This also supplies a default bootcommand. It loads an image and device tree from the first partition of the MMC. This is a minimal/least effort bootcmd, so suggestions (especially in the form of patches) are welcome. I didn't set up distro boot because I think it is unlikely that any general-purpose linux distros will ever be ported to this board. Signed-off-by: Sean Anderson <seanga2@gmail.com> Tested-by: Chrstopher Obbard <obbardc@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
* configs: socfpga: Add CONFIG_SPL_PAD_TOLey Foon Tan2021-01-151-0/+2
| | | | | | | | | Add CONFIG_SPL_PAD_TO for Gen5 and Arria 10. CONFIG_SPL_PAD_TO is set to size of OCRAM. This is preparation for image padding change in socfpgaimage. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
* arm: socfpga: soc64: SSBL shall not setup stack on OCRAMChee Hong Ang2021-01-151-0/+5
| | | | | | | Since SSBL is running in DRAM, it shall setup the stack in DRAM instead of OCRAM which is occupied by SPL and handoff data. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
* arm: socfpga: soc64: Load FIT image with ATF supportChee Hong Ang2021-01-151-1/+18
| | | | | | | | | | | | Instead of loading u-boot proper image (u-boot.img), SPL now loads FIT image (u-boot.itb) which includes u-boot proper, ATF and u-boot proper's DTB. For OS, u-boot now loads FIT images (kernel.itb) which includes Linux Image and Linux's DTB. Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
* Merge tag 'ti-v2021.04-rc1' of ↵Tom Rini2021-01-124-15/+13
|\ | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-ti - DM support for OMAP PWM backlight - USB host mode support for AM654 - Minor SPI fixes - Add support k2g ice board with 1GHz silicon - Fix GTC programming for K3 devices
| * Nokia RX-51: Do not try calling both ext2load and ext4loadPali Rohár2021-01-121-14/+3
| | | | | | | | | | | | | | | | Those two commands now doing same thing, reading from ext2/3/4 filesystem. So remove useless duplicated call. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz>
| * arm:pdu001: Use pseudo partition UUID for LINUX kernel boot paramter rootFelix Brack2021-01-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As more and more LINUX drivers are modified to use asynchronous probing instead of synchronous probing, relying on device names being equal in U-Boot and LINUX is not possible anymore. This is also true for block device names like mmc0, mmc1 ect. With LINUX kernel commit a1a4891 the probing type for the sdhci-omap driver has been set to asynchronous mode too (probe_type is now PROBE_PREFER_ASYNCHRONOUS). In the case of the PDU001 board this results in the devices mmc0 and mmc1 being swapped between U-Boot and LINUX. Device mmc0 in U-Boot becomes mmc1 in LINUX an vice versa. Hence using device name identifiers with LINUX kernel parameter root does not work anymore. This patch changes the LINUX kernel boot parameter root to use the pseudo (since we use MBR not GPT) partition UUID to locate the partition hosting the root file system. Signed-off-by: Felix Brack <fb@ltec.ch>
| * board: ti: k2g: Add support for K2G ICE with 1GHz SiliconLokesh Vutla2021-01-121-0/+2
| | | | | | | | | | | | Add board detection support for K2G ICE with FlagChip 1GHz silicon. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * configs: am65x_evm: Define the maximum file size for DFUAswath Govindraju2021-01-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In include/dfu.h, if CONFIG_SYS_DFU_MAX_FILE_SIZE is not defined then it is defined as CONFIG_SYS_DFU_DATA_BUF_SIZE. This is 128 KiB for a53 core and 20 KiB for r5 core. If a larger file is transferred using dfu then it fails. CONFIG_SYS_DFU_DATA_BUF_SIZE can not be increased as there is not enough heap memory to be allocated for the buffer in case of R5 spl. Fix this by defining CONFIG_SYS_DFU_MAX_FILE_SIZE as the default CONFIG_SYS_DFU_DATA_BUF_SIZE value. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
* | Merge tag 'u-boot-atmel-2021.04-a' of ↵Tom Rini2021-01-121-0/+45
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2021.04 cycle This feature set includes the new board SAMA7G5 EK, the new evaluation kit for Microchip AT91 SAMA7G5 SoC . The current board support includes two configurations for booting from eMMC (SDMMC0), SD-Card (SDMMC1), and support for two Ethernet interfaces.
| * | board: atmel: sama7g5ek: clean-up header bootcommandEugen Hristev2021-01-071-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | Clean-up boot command to use the predefined device and part for FAT environment. According to this device and partition, select the proper boot media. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
| * | board: atmel: sama7g5ek: increase arp timeout and retry countClaudiu Beznea2021-01-071-0/+3
| | | | | | | | | | | | | | | | | | | | | Increase ARP timeout and retry count as this will increase the speed of communication. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
| * | board: atmel: sama7g5ek: add SYS_MALLOC_F_LEN to SYS_INIT_SP_ADDRClaudiu Beznea2021-01-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Heap base address is computed based on SYS_INIT_SP_ADDR by subtracting the SYS_MALLOC_F_LEN value in board_init_f_init_reserve(). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
| * | board: atmel: sama7g5ek: add initial support for sama7g5ekEugen Hristev2021-01-071-0/+46
| | | | | | | | | | | | | | | | | | Add initial support for sama7g5 evaluation kit board. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
* | | sunxi: Add arm64 FEL supportAndre Przywara2021-01-111-2/+0
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we did not support the BootROM based FEL USB debug mode on the 64-bit builds for Allwinner SoCs: The BootROM is using AArch32, but the SPL runs in AArch64. Returning back to AArch32 was not working as expected, since the RMR reset into 32-bit mode always starts execution in the BootROM, but not in the FEL routine. After some debug and research and with help via IRC, the CPU hotplug mechanism emerged as a solution: If a certain R_CPUCFG register contains some magic, the BootROM will immediately branch to an address stored in some other register. This works well for our purposes. Enable the FEL feature by providing early AArch32 code to first save the FEL state, *before* initially entering AArch64. If we eventually determine that we should return to FEL, we reset back into AArch32, and use the CPU hotplug mechanism to run some small AArch32 code snippet that restores the initially saved FEL state. That allows the normal AArch64 SPL build to be loaded via the sunxi-fel tool, with it returning into FEL mode, so that other payloads can be transferred via FEL as well. Tested on A64, H5 and H6. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Priit Laes <plaes@plaes.org> (on Olimex A64-Olinuxino)
* | Merge branch 'next'Tom Rini2021-01-1114-18/+19
|\ \ | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
| * \ Merge tag 'xilinx-for-v2021.04' of ↵Tom Rini2021-01-061-1/+16
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.04 arm64: - DT updates microblaze: - Add support for NOR device support spi: - Fix unaligned data write issue nand: - Minor code change xilinx: - Fru fix in limit calculation - Fill git repo link for all Xilinx boards video: - Add support for seps525 spi display tools: - Minor Vitis file support cmd/common - Minor code indentation fixes serial: - Uartlite debug uart initialization fix
| | * | microblaze: Add nor device to distro bootT Karthik Reddy2021-01-041-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add parallel nor device to distroboot for microblaze. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | Merge tag 'v2021.01-rc5' into nextTom Rini2021-01-0566-413/+517
| |\| | | | | | | | | | | | | | | | | | | | | | Prepare v2021.01-rc5 Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | km/arm: coding style clean upHolger Brunck2020-12-012-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Address most of the checkpatch issues we found in km_arm and common km code. CC: Stefan Roese <sr@denx.de> CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com> Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com> Reviewed-by: Stefan Roese <sr@denx.de>
| * | | hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board filesPatrick Delaunay2020-12-0111-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no reason to define default option for this macro which is already done in common/cli_hush.c. 87 #ifndef CONFIG_SYS_PROMPT_HUSH_PS2 88 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 89 #endif Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
* | | | xea: config: Use CONFIG_PREBOOT from KconfigLukasz Majewski2021-01-081-1/+0
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usage of the preboot feature is now controlled via a separate Kconfig option - namely CONFIG_USE_PREBOOT. It must be enabled for preboot code executing commands now defined in CONFIG_PREBOOT (also moved to the Kconfig). After defining both CONFIG_USE_PREBOOT and CONFIG_PREBOOT in imx28_xea_defconfig the define of CONFIG_PREBOOT shall be removed from xea.h as it is redundant. Signed-off-by: Lukasz Majewski <lukma@denx.de>
* | | board: ge: bx50v3: remove confidx magic numbersSebastian Reichel2020-12-261-2/+2
| |/ |/| | | | | | | | | | | | | Instead of hardcoding index magic numbers in the board code, also rely on board_fit_config_name_match choosing the right config for the fitImage containing the kernel. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
* | board: kontron: sl28: reorder mmc devicesMichael Walle2020-12-201-1/+1
| | | | | | | | | | | | | | | | | | Since linux commit 2e6cde96873253fd9eb0f20afd8ffd18278cff75 ("arm64: dts: ls1028a: make the eMMC and SD card controllers use fixed indices") mmc0 is the eMMC and mmc1 is the SD card. Also swap it in u-boot to avoid any confusion by the user and to be aligned with linux. Signed-off-by: Michael Walle <michael@walle.cc>
* | dh_imx6: Switch to full DM-awareJagan Teki2020-12-181-6/+0
| | | | | | | | | | | | | | | | | | | | Enable DM_SPI/DM_SPI_FLASH with a related config option. Build fine, but not tested. Cc: Ludwig Zenz <lzenz@dh-electronics.de> Cc: Andreas Geisreiter <ageisreiter@dh-electronics.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | cm_fx6: Switch to full DM-awareJagan Teki2020-12-181-7/+0
| | | | | | | | | | | | | | | | | | Enable DM_SPI/DM_SPI_FLASH with a related config option. Build fine, but not tested. Cc: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-10-01 14:22:21 +0000