summaryrefslogtreecommitdiffstats
path: root/include/configs/ls1012afrwy.h
Commit message (Collapse)AuthorAgeFilesLines
* ls1012a: use default scan_dev_for_bootMian Yousaf Kaukab2021-04-151-7/+0
| | | | | | | | | | scan_dev_for_efi is supposed to be called from scan_dev_for_boot. However, this call is missing for ls1012a boards. As a result EFI boot doesn’t work. Fix this issue by removing custom definition of scan_dev_for_boot and use the default definition instead. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* include/configs: ls1012a: Remove fdt_high env variableUdit Agarwal2020-07-271-1/+1
| | | | | | | | | Remove "fdt_high" environment variable to use the bootm_size to safely contain a kernel, device tree and initrd for relocation. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* Convert CONFIG_CMD_ASKENV et al to KconfigTom Rini2020-06-041-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_ASKENV CONFIG_CMD_BMP CONFIG_CMD_BOOTD CONFIG_CMD_CACHE CONFIG_CMD_CRC32 CONFIG_CMD_DHCP CONFIG_CMD_ENV CONFIG_CMD_EXPORTENV CONFIG_CMD_EXT2 CONFIG_CMD_EXT4 CONFIG_CMD_FLASH CONFIG_CMD_FS_GENERIC CONFIG_CMD_FUSE CONFIG_CMD_GPIO CONFIG_CMD_GPT CONFIG_CMD_GREPENV CONFIG_CMD_I2C CONFIG_CMD_IMLS CONFIG_CMD_IMPORTENV CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_CMD_MEMINFO CONFIG_CMD_MII CONFIG_CMD_MTDPARTS CONFIG_CMD_NAND CONFIG_CMD_NAND_TRIMFFS CONFIG_CMD_NFS CONFIG_CMD_PCA953X CONFIG_CMD_PCA953X_INFO CONFIG_CMD_PCI CONFIG_CMD_PING CONFIG_CMD_READ CONFIG_CMD_SF CONFIG_CMD_SPI CONFIG_CMD_SPL CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_TIME CONFIG_CMD_TRACE CONFIG_CMD_UBI CONFIG_CMD_UBIFS CONFIG_CMD_UNZIP CONFIG_FS_EXT4 Signed-off-by: Tom Rini <trini@konsulko.com>
* treewide: Remove unused FSL QSPI config options for Layerscape platformsKuldeep Singh2020-05-191-3/+0
| | | | | | | | | | | Some of these options are not used by the driver anymore and some of them are obsolete as the information is gathered from the dt. Also consolidating defines in common headers. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma2020-05-081-4/+0
| | | | | | | | | | | Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
* treewide: mem: Enable MEMTEST via defconfigMichal Simek2020-05-081-2/+0
| | | | | | | There is no reason to enable MEMTEST from headers when was converted to Kconfig already. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* configs: ls1012afrwy: drop env qspi_bootcmdBiwen Li2020-04-291-9/+0
| | | | | | | | | | Drop useless environment variable installer and qspi_bootcmd for ls1012afrwy. Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from the nor flash, then drop it. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* include/configs: ls1012afrwy: support dhcp bootBiwen Li2020-04-281-1/+2
| | | | | | | Add support of dhcp boot for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* configs: ls1012afrwy: fix board nameBiwen Li2020-04-171-3/+4
| | | | | | | Fix board name for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* configs: ls1012afrwy: adjust env kernel_addr_rBiwen Li2020-03-301-1/+1
| | | | | | | | | | Adjust environment kernel_addr_r from 0x96000000 to 0x92000000 to fix a bug that failed to boot kernel for ls1012afrwy with 512MiB RAM, => tftpboot $kernel_addr_r Image (Image size is 36 MiB) TFTP error: trying to overwrite reserved memory... Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* configs: ls1012afrwy: fix wrong env of boardBiwen Li2020-03-301-0/+3
| | | | | | | Fix wrong environment variable of board for ls1012afrwy Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* include/configs: ls1012afrwy: fix load address of itb with bootm commandBiwen Li2020-03-301-1/+1
| | | | | | | | The old load address of itb will overwrite uboots reserved memory on ls1012afrwy with 512 MiB ram Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* include/configs: ls1012afrwy: adjust kernel_addr_rBiwen Li2020-01-241-1/+1
| | | | | | | | | | | | | | | | | | | The linux kernel Image is growing quite quickly, if kernel Image size grow beyond 36 MB then kernel Image at load address 0x81000000 overlaps with the reserved memory region at 0x83400000. Adjust kernel load address(kernel_addr_r) from 0x81000000 to 0x96000000 to avoid kernel Image overlapping with reserved memory region. This change fixes the below U-Boot error while booting uncompressed kernel Image through booti command, ERROR: reserving fdt memory region failed (addr=83400000 size=c00000) Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* include/configs: ls1012a: add pfe stop commandBiwen Li2019-11-271-2/+2
| | | | | | | | | | | This adds pfe stop command before boot linux kernel to fix a problem that ethernet won't be workable after enter linux. Because there is a h/w limitation in LS1012A PFE, to re-initialize PFE it has to be safe shutdown, these steps are done through PFE stop. Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* env: Finish migration of common ENV optionsTom Rini2019-11-201-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* configs: ls1012afrwy: Add CONFIG_ENV_ADDRKuldeep Singh2019-10-211-0/+5
| | | | | | | | This configuration enables picking the environment from flash before DDR init. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* Move CONFIG_FSL_ESDHC to defconfigYangbo Lu2019-06-231-1/+0
| | | | | | | | | | | Moved CONFIG_FSL_ESDHC from header files to defconfig files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Jason Liu <Jason.hui.liu@nxp.com>
* armv8: Secure Boot: Modify boot_a_script definitionVinitha V Pillai2019-05-221-1/+2
| | | | | | | | | | | | | | | | esbc_validate command will not be executed if “load” command for its header fails and will further execute the source command for bootscript, without its validation and boot process continues. To halt the boot process in case secure boot header is not loaded successfully, esbc_validate command is invoked separately after “load” command. The secure boot validation of the bootscript header will fail (if header is not loaded) and halts the boot process, which prevent source command from execution. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* armv8: ls1012afrx: Add TFABOOT supportRajesh Bhagat2018-12-061-0/+6
| | | | | | | | | | | | TFABOOT support includes: - ls1012a2g5rdb/ls1012afrdm/ls1012afrwy_tfa_defconfig to be loaded by trusted firmware - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [YS: remove unnecessary braces] Reviewed-by: York Sun <york.sun@nxp.com>
* ls1012afrwy: Add ls1012afrwy revC board support.Pramod Kumar2018-09-271-3/+3
| | | | | | | | | | LS1012AFRWY supports three board revisions. Revision A and B board are collectively identified as revA/B, Revision C board is identifies as revC. Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> [York S: revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini2018-08-161-1/+0
| | | | | | | | | | | We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
* LS1012AFRWY: Add Secure Boot supportVinitha V Pillai2018-06-111-1/+15
| | | | | | | | | Added the following: 1. defconfig for LS1012AFRWY Secure boot 2. PfE Validation support Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* board: ls1012a: FRWY-LS1012A board supportBhaskar Upadhaya2018-06-111-0/+119
FRWY-LS1012A belongs to LS1012A family with features 2 1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, QuadSPI, Audio, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> [yorks: rebase and fix SPDX tag] [yorks: fix board/freescale/ls1012afrdm/Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2024-07-02 13:06:17 +0000