summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* usb: xhci: octeon: Add DWC3 glue layer for OcteonStefan Roese2020-10-071-0/+1
| | | | | | | | | | This patch adds the glue layer for the MIPS Octeon SoCs. It's ported mainly from the Linux code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
* driver: usb: drop legacy rockchip xhci driverFrank Wang2020-05-301-1/+0
| | | | | | | | | We have changed to use dwc3 generic driver for usb3.0 host, so the legacy Rockchip's xHCI driver is not needed, and drop it. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* xhci: mediatek: Add support for MTK xHCI host controllerChunfeng Yun2020-05-021-0/+1
| | | | | | | | | | | This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* drivers: usb: host: Add BRCM xHCI driverRayagonda Kokatanur2020-04-131-0/+1
| | | | | | | | Base driver for Broadcom xHCI controllers Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
* usb: host: remove the xhci-zynqmp driverJean-Jacques Hiblot2019-10-241-1/+0
| | | | | | This driver is not used anymore. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* usb, ohci, pci: add DM support for PCI-based OHCI USB controllerHeiko Schocher2019-08-081-0/+1
| | | | | | | add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
* usb: host: Drop [e-o]hci-sunxi driversJagan Teki2019-01-181-2/+0
| | | | | | | | Now Allwinner platform is all set to use Generic USB controller drivers, so remove the legacy sunxi drivers. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
* usb: host: replace xhci-keystone driver by the generic dwc3 driverJean-Jacques Hiblot2018-12-141-1/+0
| | | | | | | | | The keystone platforms can use the generic DC3 driver. Removing the keystone-spcecific xchi driver and add the configuration options to enable the generic DWC3 driver on all K2 platforms. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: Remove CMD_USB dependency for common codeSven Schwermer2018-11-261-1/+1
| | | | | | | | Common USB code is built whenever USB is enabled (in non-SPL builds). The USB uclass is built whenever (SPL_)DM_USB is enabled. Both need to be independent from CMD_USB. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* usb: Introduce CONFIG_SPL_DM_USBSven Schwermer2018-11-261-1/+1
| | | | | | | | This allows building the SPL without driver model for USB. Since CONFIG_SPL_DM_USB is enabled if and only if CONFIG_DM_USB was enabled before, this patch does not change the build behaviour. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-3/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: host: Add simple of glue driver for DWC3 USB Controllers integrationNeil Armstrong2018-04-111-0/+1
| | | | | | | This is a port of the dwc3-of-simple driver from Linux to enable/deassert clock and resets of a simple DWC3 Controller HW glue. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* usb: Remove unused ppc4xx EHCI host driverStefan Roese2018-03-171-1/+0
| | | | | | | | | ppc4xx support was removed some time ago. Lets remove the now unused EHCI driver and all its references for this platform as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Marek Vasut <marex@denx.de>
* usb: Remove isp116x-hcd supportTom Rini2018-01-281-1/+0
| | | | | | | The isp116x-hcd driver is extremely long unused, so just remove it. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: xhci: Add Renesas R-Car xHCI driverMarek Vasut2017-11-261-0/+1
| | | | | | | | | | Add firmware V3, firmware loader and XHCI glue for the Renesas R-Car Gen3 SoCs XHCI controller. Thus far only the R-Car Gen3 R8A7795 ES2.0+ and R8A7796 are supported. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Bin Meng <bmeng.cn@gmail.com>
* usb: Drop the EHCI RCar Gen3Marek Vasut2017-10-041-1/+0
| | | | | | | | | | Since we use EHCI generic driver on RCar Gen3 , this driver is useless. Remove it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* usb: dwc3: Add dwc3 glue driver support for STiPatrice Chotard2017-09-221-0/+1
| | | | | | | | | | | | This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It configures the internal glue logic and syscfg registers. Part of this code been extracted from kernel.org driver (drivers/usb/dwc3/dwc3-st.c) Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher2017-06-161-4/+0
| | | | | | | | | There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
* samsung: usb: Drop ohci-s3c24xx driverSimon Glass2017-06-051-1/+0
| | | | | | This is not used anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: ehci: Add Renesas RCar M3/H3 EHCI supportHiroyuki Yokoyama2017-05-221-0/+1
| | | | | | | | | | | | Add a USB controller driver for the EHCI block in R8A7795/R8A7796 SoC. This is a stopgap measure until we have proper DT support, clock and reset framework in place, at which point we can switch to ehci-generic. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCDTom Rini2017-05-151-1/+1
| | | | | | | | | | In order to be able to migrate the various SoC EHCI CONFIG options we first need to finish the switch from CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD. Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: xhci: Add Marvell MVEBU xHCI supportStefan Roese2016-09-271-0/+1
| | | | | | | | | | | | | | | | | This patch adds DM based support for the xHCI USB 3.0 controller integrated in the Armada 3700 SoC. It may be extended to be used by other MVEBU SoCs as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: xhci-rockchip: add rockchip dwc3 controller driverMengDongyang2016-09-221-0/+1
| | | | | | | | | | | | This patch add support for rockchip dwc3 controller, which corresponding to the two type-C port on rk3399 evb. Only support usb2.0 currently for we have not enable the usb3.0 phy driver and PD(fusb302) driver. Signed-off-by: MengDongyang <daniel.meng@rock-chips.com> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: uniphier: remove UniPhier xHCI driver and select DM_USBMasahiro Yamada2016-09-141-1/+0
| | | | | | | | | | | | | | This driver has not been converted to Driver Model, and it is an obstacle to migrate other block device drivers. Remove it for now. The UniPhier SoCs already use a DM-based EHCI driver, so now ARCH_UNIPHIER can select DM_USB. These two changes must be done atomically because removing the legacy driver causes a build error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: move CONFIG_USB_XHCI to Kconfig with renamingMasahiro Yamada2016-06-041-1/+1
| | | | | | | | | | | | | | | | | Move CONFIG_USB_XHCI to defconfig files for all boards, renaming it into CONFIG_USB_XHCI_HCD. As commented in the help of "config USB_XHCI" entry, this has been a TODO for a long time; now CONFIG_USB_XHCI_HCD and CONFIG_USB_XHCI have been unified in favor of the former. Note: Some boards define CONFIG_USB_XHCI in their headers without CONFIG_USB, which does not meet the "depends on" in Kconfig. I added CONFIG_USB=y for those boards when converting. Otherwise, they would fail to build. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ehci: Add support for Qualcomm EHCIMateusz Kulikowski2016-04-011-0/+1
| | | | | | | | | | This driver is able to reconfigure OTG controller into HOST mode. Board can add board-specific initialization as board_prepare_usb(). It requires USB_ULPI_VIEWPORT enabled in board configuration. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
* usb: remove UniPhier EHCI driverMasahiro Yamada2016-02-141-1/+0
| | | | | | | | | | Now, all this driver does can be covered by the generic EHCI driver (drivers/usb/host/ehci-generic.c). UniPhier SoCs have switched to use it. Delete this driver rather than bothering to convert it to Driver Model. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: add support of generic OHCI devicesAlexey Brodkin2015-12-171-0/+1
| | | | | | | | | | | This driver is meant to be used with any OHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
* usb: add support for generic EHCI devicesAlexey Brodkin2015-12-071-0/+1
| | | | | | | | | | | | This driver is meant to be used with any EHCI-compatible host controller in case if there's no need for platform-specific glue such as setup of controller or PHY's power mode via GPIOs etc. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Cc: Marek Vasut <marex@denx.de>
* usb: zynqmp: Add XHCI driver supportSiva Durga Prasad Paladugu2015-12-071-0/+1
| | | | | | Added USB XHCI driver support for zynqmp. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
* imx: usb: ehci-mx6: add usb support for imx7d socAdrian Alonso2015-08-191-0/+1
| | | | | | Extend ehci-mx6 usb driver to support imx7d usb Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* usb: lpc32xx: add host USB driverSylvain Lemieux2015-08-181-0/+1
| | | | | | | | | | | | | Incorporate USB driver from legacy LPCLinux NXP BSP. The files taken from the legacy patch are: - lpc32xx USB driver - lpc3250 header file USB registers definition. The legacy driver was updated and clean-up as part of the integration with the latest u-boot. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Vladimir Zapolskiy <vz@mleia.com>
* usb: fsl: Add XHCI driver supportRamneek Mehresh2015-07-221-0/+1
| | | | | | Add xhci driver support for all FSL socs Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
* usb: dwc3: Add DWC3 controller driver supportRamneek Mehresh2015-07-221-0/+1
| | | | | | Add support for DWC3 XHCI controller driver Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
* sunxi: ohci: Add ohci usb host controller supportHans de Goede2015-05-141-0/+1
| | | | | | | | | | | | | This commit adds support for the OHCI companion controller, which makes usb-1 devices directly plugged into to usb root port work. Note for now this switches usb-keyboard support for sunxi back from int-queue support to the old interrupt polling method. Adding int-queue support to the ohci code and switching back to int-queue support is in the works. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* usb: host: Add ehci-vf USB driver for ARM Vybrid SoC'sSanchayan Maity2015-04-231-0/+1
| | | | | | | This driver adds support for the USB peripheral on Freescale Vybrid SoC's. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
* dm: usb: sandbox: Add a driver for sandboxSimon Glass2015-04-181-0/+1
| | | | | | | | This driver supports using emulation devices to provide a USB bus within sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* dm: usb: Add a uclass for USB controllersSimon Glass2015-04-181-0/+4
| | | | | | | | Add a uclass that can represent a USB controller. For now we do not create devices for things attached to the controller. This will be added later. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: UniPhier: add UniPhier on-chip xHCI host driver supportMasahiro Yamada2015-03-011-0/+1
| | | | | | | Support xHCI host driver used on Panasonic UniPhier platform. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
* usb: pci: Add XHCI driver for PCISimon Glass2015-02-051-0/+1
| | | | | | | | Add a driver which locates the available XHCI controllers on the PCI bus and makes them available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* usb: UniPhier: add UniPhier on-chip EHCI host driver supportMasahiro Yamada2014-11-121-0/+1
| | | | | | | | | | | | Support EHCI host driver used on Panasonic UniPhier platform. Since Device Tree is not supported on UniPhier yet, the base address of USB cores are passed from board files (platdevice.c). TODO for me: Move the base address to device trees. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2014-10-271-0/+1
|\
| * keystone: usb: add support of usb xhciWingMan Kwok2014-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support of usb xhci. xHCI controls all USB speeds of the Host mode, that is, the SS through the SS PHY, as well as the HS, FS, and LS through the USB2 PHY. xHCI replaces and supersedes all previous host HCIs (HS-only EHCI, FS/LS OHCI and UHCI), and is therefore not backwards compatible with any of them. The USB3SS’s USB Controller is fully compliant with xHC. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* | usb: dwc2: Add driver for Synopsis DWC2 USB IP blockOleksandr Tymoshenko2014-10-221-0/+3
|/ | | | | | | | | | | | | | | | | | | This is the USB host controller used on the Altera SoCFPGA and Raspbery Pi. This code has three checkpatch warnings, but to make sure it stays at least readable and clear, these are not fixed. These bugs are in the USB request handling combinatorial logic, so any abstracting of those is out of question. Tested on DENX MCV (Altera SoCFPGA 5CSFXC6C6U23C8N) and RPi B+ (BCM2835). Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Acked-by: Pavel Machek <pavel@denx.de> Cc: Vince Bridgers <vbridger@altera.com> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* sunxi: add USB EHCI driverRoman Byshko2014-07-311-0/+1
| | | | | | | | | The Allwinner aka sunxi SoCs have one or more USB host controllers. This adds a driver for their EHCI. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* arm: ep9315: Return back Cirrus Logic EDB9315A board supportSergey Kostanbaev2014-07-041-0/+1
| | | | | | | This patch returns back support for old ep93xx processors family Signed-off-by: Sergey Kostanbaev <sergey.kostanbaev@gmail.com> Cc: albert.u.boot@aribaud.net
* ARM: zynq: ehci: Added USB host driver supportMichal Simek2014-05-141-0/+1
| | | | | | | Added USB host driver for zynq. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* usb: ehci: rmobile: Add support ehci host driver of rmobile SoCsNobuhiro Iwamatsu2014-04-301-0/+1
| | | | | | | | The rmobile SoC has usb host controller. This supports USB controllers listed in the R8A7790, R8A7791 and R8A7740. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: Marek Vasut <marex@denx.de>
* ARM: USB: Remove the IXP EHCI driverMarek Vasut2014-02-061-1/+0
| | | | | | | | | The driver is no longer used, remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michael Schwingen <michael@schwingen.org> Cc: Tom Rini <trini@ti.com>
* drivers: usb: convert makefiles to Kbuild styleMasahiro Yamada2013-10-311-51/+29
| | | | Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
generated by cgit (git 2.34.1) at 2024-09-28 12:22:35 +0000