summaryrefslogtreecommitdiffstats
path: root/drivers/spi
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegraTom Rini2020-04-031-16/+23
|\ | | | | | | | | | | - Add support for Jetson Nano, plus miscellaneous other fixes found during Nano bringup. - Add Igor's update_uboot wrapper patches.
| * qspi: t210: Use dev_read calls to get FDT data like base, freqTom Warren2020-04-021-8/+7
| | | | | | | | | | | | | | | | | | | | This Tegra QSPI driver hadn't been brought up to date with how DM drivers are fetching data from the FDT now, and was pulling in bogus data for base, max freq, etc. Fixed ofdata_to_platdata to work the same way it does in the tegra114 SPI driver, using dev_read_ functions. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * qspi: t210: Fix QSPI clock and tap delaysTom Warren2020-04-021-9/+15
| | | | | | | | | | | | | | | | | | | | | | When claim_bus was setting the clock, it reset the QSPI controller, which wipes out any tap delays set by previous bootloaders (nvtboot, CBoot for example on Nano). Instead of doing that in claim_bus, which gets called a lot, moved clock setting to probe(), and set tap delays there, too. Also updated clock to 80MHz to match CBoot. Now QSPI env save works reliably again. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * qspi: t210: Fix claim_bus's use of the wrong bus/deviceTom Warren2020-04-021-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | claim_bus() is passed a udevice *dev, which is the bus device's parent. In this driver, claim_bus assumed it was the bus, which caused the 'priv' info pointer to be wrong, and periph_id was incorrect. This in turn caused the periph clock call to assign the wrong clock (PLLM instead of PLLP0), which caused a kernel warning. I only saw the 'bad' periph_id when enabling DEBUG due to an assert. Not sure how QSPI was working w/this errant clock, but it was moot as QSPI wasn't active unless you probed it, and that wasn't happening until I posted a patch to enable env save to QSPI for Nano (coming soon). Signed-off-by: Tom Warren <twarren@nvidia.com>
* | spi: atmel-quadspi: Add verbose debug facilities to monitor register accessesTudor Ambarus2020-04-021-18/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | This feature should not be enabled in release but can be useful for developers who need to monitor register accesses at some specific places. Helped me identify a bug in u-boot, by comparing the register accesses from the u-boot driver with the ones from its linux variant. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> [jagan: use 16 bit array with tmp variable] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* | spi: atmel-quadspi: fix possible MMIO window size overrunTudor Ambarus2020-04-021-0/+11
|/ | | | | | | | | | | | | | | | The sama5d2 QSPI controller memory space is limited to 128MB: 0x9000_00000-0x9800_00000/0XD000_0000--0XD800_0000. There are nor flashes that are bigger in size than the memory size supported by the controller: Micron MT25QL02G (256 MB). Check if the address exceeds the MMIO window size. An improvement would be to add support for regular SPI mode and fall back to it when the flash memories overrun the controller's memory space. Fixes: 24c8ff4684c5 ("spi: Add Atmel QuadSPI driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* mpc8xxx_spi: implement real ->set_speedRasmus Villemoes2020-03-311-11/+53
| | | | | | | | | | | | Not all boards have the same CSB frequency, nor do every SPI slave necessarily support running at 16.7 MHz. So implement ->set_speed; that also allows using a smaller PM (i.e., 0) for slaves that do support a higher speed. Based on work by Klaus H. Sørensen. Cc: Klaus H. Sorensen <khso@prevas.dk> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
* mpc8xxx_spi: always use 8-bit characters, don't read or write garbageRasmus Villemoes2020-03-311-53/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a few problems with the current driver. First, it unconditionally reads from dout/writes to din whether or not those pointers are NULL. So for example a simple "sf probe" ends up writing four bytes at address 0: => md.l 0x0 8 00000000: 45454545 45454545 05050505 05050505 EEEEEEEE........ 00000010: 00000000 00000000 07070707 07070707 ................ => sf probe 0 mpc8xxx_spi_xfer: slave spi@7000:0 dout 0FB53618 din 00000000 bitlen 8 mpc8xxx_spi_xfer: slave spi@7000:0 dout 00000000 din 0FB536B8 bitlen 48 SF: Detected s25sl032p with page size 256 Bytes, erase size 64 KiB, total 4 MiB => md.l 0x0 8 00000000: ff000000 45454545 05050505 05050505 ....EEEE........ 00000010: 00000000 00000000 07070707 07070707 ................ (here I've change the first debug statement to a printf, and made it print the din/dout pointers rather than the uints they point at). Second, as we can also see above, it always writes a full 32 bits, even if a smaller amount was requested. So for example => mw.l $loadaddr 0xaabbccdd 8 => md.l $loadaddr 8 02000000: aabbccdd aabbccdd aabbccdd aabbccdd ................ 02000010: aabbccdd aabbccdd aabbccdd aabbccdd ................ => sf read $loadaddr 0x400 6 device 0 offset 0x400, size 0x6 mpc8xxx_spi_xfer: slave spi@7000:0 dout 0FB536E8 din 00000000 bitlen 40 mpc8xxx_spi_xfer: slave spi@7000:0 dout 00000000 din 02000000 bitlen 48 SF: 6 bytes @ 0x400 Read: OK => sf read 0x02000010 0x400 8 device 0 offset 0x400, size 0x8 mpc8xxx_spi_xfer: slave spi@7000:0 dout 0FB53848 din 00000000 bitlen 40 mpc8xxx_spi_xfer: slave spi@7000:0 dout 00000000 din 02000010 bitlen 64 SF: 8 bytes @ 0x400 Read: OK => md.l $loadaddr 8 02000000: 45454545 45450000 aabbccdd aabbccdd EEEEEE.......... 02000010: 45454545 45454545 aabbccdd aabbccdd EEEEEEEE........ Finally, when the bitlen is 24 mod 32 (e.g. requesting to read 3 or 7 bytes), the last three bytes and up being the wrong ones, since the driver does a full 32 bit read and then shifts the wrong byte out: => mw.l $loadaddr 0xaabbccdd 4 => md.l $loadaddr 4 02000000: aabbccdd aabbccdd aabbccdd aabbccdd ................ => sf read $loadaddr 0x444 10 device 0 offset 0x444, size 0x10 mpc8xxx_spi_xfer: slave spi@7000:0 dout 0FB536E8 din 00000000 bitlen 40 mpc8xxx_spi_xfer: slave spi@7000:0 dout 00000000 din 02000000 bitlen 128 SF: 16 bytes @ 0x444 Read: OK => md.l $loadaddr 4 02000000: 552d426f 6f742032 3031392e 30342d30 U-Boot 2019.04-0 => mw.l $loadaddr 0xaabbccdd 4 => sf read $loadaddr 0x444 0xb device 0 offset 0x444, size 0xb mpc8xxx_spi_xfer: slave spi@7000:0 dout 0FB536E8 din 00000000 bitlen 40 mpc8xxx_spi_xfer: slave spi@7000:0 dout 00000000 din 02000000 bitlen 88 SF: 11 bytes @ 0x444 Read: OK => md.l $loadaddr 4 02000000: 552d426f 6f742032 31392e00 aabbccdd U-Boot 219...... Fix all of that by always using a character size of 8, and reject transfers that are not a whole number of bytes. While it ends being more work for the CPU, we're mostly bounded by the speed of the SPI bus, and we avoid writing to the mode register in every loop. Based on work by Klaus H. Sørensen. Cc: Klaus H. Sorensen <khso@prevas.dk> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
* mpc8xxx_spi: put max_cs to useRasmus Villemoes2020-03-311-2/+7
| | | | | | | | | | | | | | | | Currently, max_cs is write-only; it's just set in mpc8xxx_spi_ofdata_to_platdata and not otherwise used. My mpc8309 was always resetting during an "sf probe 0". It turns out dm_gpio_set_dir_flags() was being called with garbage, since nothing had initialized priv->gpios[0] - our device tree used "cs-gpios" rather than "gpios", so gpio_request_list_by_name() had returned 0. That would have been a lot easier to figure out if the chip select index was sanity checked, so rename max_cs to cs_count, and reject a xfer with a too large cs index. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
* dm: core: Drop the inclusion of linux/compat.h in dm.hSimon Glass2020-02-051-0/+1
| | | | | | | Most files don't need this header and it pulls in quite of lots of stuff, malloc() in particular. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: core: Create a new header file for 'compat' featuresSimon Glass2020-02-0514-0/+16
| | | | | | | | | | | | At present dm/device.h includes the linux-compatible features. This requires including linux/compat.h which in turn includes a lot of headers. One of these is malloc.h which we thus end up including in every file in U-Boot. Apart from the inefficiency of this, it is problematic for sandbox which needs to use the system malloc() in some files. Move the compatibility features into a separate header file. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: core: Require users of devres to include the headerSimon Glass2020-02-055-0/+5
| | | | | | | | | | At present devres.h is included in all files that include dm.h but few make use of it. Also this pulls in linux/compat which adds several more headers. Drop the automatic inclusion and require files to include devres themselves. This provides a good indication of which files use devres. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
* spi: ich: Drop while loop in hardware sequencing erase caseWolfgang Wallner2020-02-041-10/+2
| | | | | | | | | | | | | | | | | When ich_spi_exec_op_hwseq() is called to erase a 4k block (opcode = SPINOR_OP_BE_4K), it expects to find a length value in op->data.nbytes, but that value is always 0. As a result, the while loop is never executed and no erase is carried out. Fix this by dropping the loop code entirely, only keeping the relevant parts of the loop body. See http://patchwork.ozlabs.org/patch/1222779/ for more detailed background information and discussion. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* spi: cadence-qspi: Add compatible for TI AM654Vignesh Raghavendra2020-01-271-0/+1
| | | | | | | | TI's AM654 SoC has a Cadence OSPI IP. Add a new compatible string for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* spi: cadence-qspi: Add support for Cadence Octal SPI controllerVignesh Raghavendra2020-01-272-2/+7
| | | | | | | | | Cadence OSPI is similar to QSPI IP except that it supports Octal IO (8 IO lines) flashes. Add support for Cadence OSPI IP with existing driver using new compatible Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* mtd: spi-nor-core: Add octal mode supportVignesh Raghavendra2020-01-272-0/+12
| | | | | | | | Add support for Octal flash devices. Octal flash devices use 8 IO lines for data transfer. Currently only 1-1-8 Octal Read mode is supported. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* spi: cadence-qspi: Add direct mode supportVignesh Raghavendra2020-01-273-33/+91
| | | | | | | | | | | | | | | Add support for Direct Access Controller mode of Cadence QSPI. This allows MMIO access to SPI NOR flash providing better read performance. Direct mode is only exercised if AHB window size is greater than 8MB. Support for flash address remapping is also not supported at the moment and can be added in future. For better performance, driver uses DMA to copy data from flash in direct mode using dma_memcpy(). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
* spi: cadence_qspi: Move to spi-mem frameworkVignesh Raghavendra2020-01-273-178/+91
| | | | | | | | | | | | | | | | | | Current Cadence QSPI driver has few limitations. It assumes all read operations to be in Quad mode and thus does not support SFDP parsing. Also, adding support for new mode such as Octal mode would not be possible with current configuration. Therefore move the driver over to spi-mem framework. This has added advantage that driver can be used to support SPI NAND memories too. Hence, move driver over to new spi-mem APIs. Please note that this gets rid of mode bit setting done when CONFIG_SPL_SPI_XIP is defined as there does not seem to be any user to that config option. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
* spi: ti_qspi: Add support for CS other than CS0Vignesh Raghavendra2020-01-271-8/+13
| | | | | | | | | | Make sure corresponding setup registers are updated depending on CS. This ensures that driver can support QSPI flashes on ChipSelects other than on CS0 Reported-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* spi: prevent overriding established bus settingsMarcin Wojtas2020-01-271-9/+11
| | | | | | | | | | | | | | | | | | | The SPI stack relies on a proper bus speed/mode configuration by calling dm_spi_claim_bus(). However the hitherto code allowed to accidentally override those settings in the spi_get_bus_and_cs() routine. The initially established speed could be discarded by using the slave platdata, which turned out to be an issue on the platforms whose slave maximum supported frequency is not on par with the maximum frequency of the bus controller. This patch fixes above issue by configuring the bus from spi_get_bus_and_cs() only in case it was not done before. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
* dm: spi: Check cs number before accessing slavesBin Meng2020-01-271-19/+26
| | | | | | | Add chip select number check in spi_find_chip_select(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # SoPine
* spi: nxp_fspi: new driver for the FlexSPI controllerMichael Walle2020-01-273-0/+1004
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a port of the kernel's spi-nxp-fspi driver. It uses the new spi-mem interface and does not expose the more generic spi-xfer interface. The source was taken from the v5.3-rc3 tag. The port was straightforward: - remove the interrupt handling and the completion by busy polling the controller - remove locks - move the setup of the memory windows into claim_bus() - move the setup of the speed into set_speed() - port the device tree bindings from the original fspi_probe() to ofdata_to_platdata() There were only some style change fixes, no change in any logic. For example, there are busy loops where the return code is not handled correctly, eg. only prints a warning with WARN_ON(). This port intentionally left most functions unchanged to ease future bugfixes. This was tested on a custom LS1028A board. Because the LS1028A doesn't have proper clock framework support, changing the clock speed was not tested. This also means that it is not possible to change the SPI speed on LS1028A for now (neither is it possible in the linux driver). Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Kuldeep Singh <kuldeep.singh@nxp.com>
* spi: bcm63xx-hsspi: allow to use this driver on arm bcm68360Philippe Reynes2020-01-231-1/+2
| | | | | | | This IP is also used on some arm SoC, so we allow to use it on arm bcm68360 too. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
* common: Move clock functions into a new fileSimon Glass2020-01-171-0/+1
| | | | | | | These three clock functions don't use driver model and should be migrated. In the meantime, create a new file to hold them. Signed-off-by: Simon Glass <sjg@chromium.org>
* spi: Fix manual relocation calling more timesAshok Reddy Soma2020-01-141-15/+19
| | | | | | | | | | | | | | | | | When two instances of AXI QSPI with flash are added and tested simultaneously the spi driver operations are relocated twice. As a result code is accessing addresses outside of RAM when relocated second time which is causing a crash. Tested on Microblaze. Similar change was done in past by: commit f238b3f0fbc9 ("watchdog: dm: Support manual relocation for watchdogs") commit 2588f2ddfd60 ("dm: sf: Add support for all targets which requires MANUAL_RELOC") commit 1b4c2aa25bdf ("gpio: dm: Support manual relocation for gpio") Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Merge branch 'next'Tom Rini2020-01-066-131/+469
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
| * spi: ich: Add Apollo Lake supportSimon Glass2019-12-152-5/+15
| | | | | | | | | | | | | | | | Add support for Apollo Lake to the ICH driver. This involves adjusting the mmio address and skipping setting of the bbar. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Add TPL supportSimon Glass2019-12-151-4/+44
| | | | | | | | | | | | | | | | | | In TPL we want to reduce code size and support running with CONFIG_PCI disabled. Add special code to handle this using a fixed BAR programmed into the SPI on boot. Also cache the SPI flash to speed up boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Add support for get_mmap() methodSimon Glass2019-12-151-0/+32
| | | | | | | | | | | | | | | | Add this method so that the memory-mapped location of the SPI flash can be queried. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Support hardware sequencingSimon Glass2019-12-152-3/+245
| | | | | | | | | | | | | | | | Apollo Lake (APL) only supports hardware sequencing. Add support for this into the SPI driver, as an option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Support of-platdata for fast-spiSimon Glass2019-12-151-3/+15
| | | | | | | | | | | | | | | | The Intel Fast SPI interface is similar to ICH. Add of-platdata support for this using the "intel,fast-spi" compatible string. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Correct max-size bug in ich_spi_adjust_size()Simon Glass2019-12-151-3/+5
| | | | | | | | | | | | | | | | This incorrectly shortens read operations if there is a maximum write size but no maximum read size. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Add mmio_base to struct ich_spi_platdataSimon Glass2019-12-152-19/+13
| | | | | | | | | | | | | | | | | | It is useful to store the mmio base in platdata. It reduces the amount of casting needed. Update the code and move the struct to the C file at the same time, as we will need to use with of-platdata. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Various small tidy-upsSimon Glass2019-12-151-9/+8
| | | | | | | | | | | | | | | | | | Use debug() instead of printf() to reduce code size and change a bool return value to the use the 'bool' type. Also drop the global data declaration since it not actually used. Finally, set the log category. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Fix header orderSimon Glass2019-12-151-2/+2
| | | | | | | | | | | | | | Move the header files into the right order. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Convert to livetreeSimon Glass2019-12-151-17/+5
| | | | | | | | | | | | | | | | Use dev_get_driver_data() to obtain the device type. It has the same effect and is shorter. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Move the protection/lockdown code into a functionSimon Glass2019-12-152-20/+44
| | | | | | | | | | | | | | | | | | | | | | | | Reduce the size of the probe function but putting this code into its own function. Also remove the assumption that the PCH is always a parent of the SPI controller, as this is not the case APL platforms. Use driver model to find the PCH instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: ich: Move init function just above probe()Simon Glass2019-12-151-61/+61
| | | | | | | | | | | | | | | | | | It is annoying to have some of the init code in a different part of the file. Move ich_init_controller() to just above probe() to keep things together. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: spi: Don't enable SPI_FLASH_BAR by defaultSimon Glass2019-12-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | We don't normally need this on x86 unless the size of SPI flash devices is larger than 16MB. This can be enabled by particular SoCs as needed, since it adds to code size. Drop the default enabling of this option on x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * spi: Correct operations check in dm_spi_xfer()Simon Glass2019-12-152-9/+5
| | | | | | | | | | | | | | | | At present we have to have an xfer() method even if it does nothing. This is not correct, so fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: gpio: Allow control of GPIO uclass in SPLSimon Glass2019-12-152-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present if CONFIG_SPL_GPIO_SUPPORT is enabled then the GPIO uclass is included in SPL/TPL without any control for boards. Some boards may want to disable this to reduce code size where GPIOs are not needed in SPL or TPL. Add a new Kconfig option to permit this. Default it to 'y' so that existing boards work correctly. Change existing uses of CONFIG_DM_GPIO to CONFIG_IS_ENABLED(DM_GPIO) to preserve the current behaviour. Also update the 74x164 GPIO driver since it cannot build with SPL. This allows us to remove the hacks in config_uncmd_spl.h and Makefile.uncmd_spl (eventually those files should be removed). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | spi: rk: Limit transfers to (64K - 1) bytesJagan Teki2019-12-271-2/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Rockchip SPI controller's length register only supports 16-bits, yielding a maximum length of 64KiB (the CTRLR1 register holds "length - 1"). Trying to transfer more than that (e.g., with a large SPI flash read) will cause the driver to hang. Now, it seems that while theoretically we should be able to program CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to cause the core to choke, so stick with a maximum of 64K - 1 bytes -- i.e., 0xffff. Note, that the size is further divided into 'minus 1' while writing into CTRLR1. This change fixed two different read issues, 1. sf read failure when with > 0x10000 2. Boot from SPI flash failed during spi_flash_read call in common/spl/spl_spi.c Observed and Tested in - Rockpro64 with Gigadevice flash - ROC-RK3399-PC with Winbond flash Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* common: Move ARM cache operations out of common.hSimon Glass2019-12-023-0/+3
| | | | | | | | | These functions are CPU-related and do not use driver model. Move them to cpu_func.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* common: Move get_ticks() function out of common.hSimon Glass2019-12-029-0/+9
| | | | | | | This function belongs in time.h so move it over and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spi: cadence_qspi: support DM_CLKSimon Goldschmidt2019-11-202-2/+20
| | | | | | Support loading clk speed via DM instead of requiring ad-hoc code. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* configs: spi: Add the SPI_FLASH_BAR for ESPIXiaowei Bao2019-11-081-0/+1
| | | | | | | | | Add the SPI_FLASH_BAR for the ESPI controller of FSL, this entry is missed by commit 6d8251783641 ("configs: Don't use SPI_FLASH_BAR as default") Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* spi: Add support for memory-mapped flashSimon Glass2019-11-032-0/+25
| | | | | | | | | | | | On x86 platforms the SPI flash can be mapped into memory so that the contents can be read with normal memory accesses. Add a new SPI method to find the location of the SPI flash in memory. This differs from the existing device-tree "memory-map" mechanism in that the location can be discovered at run-time. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxiTom Rini2019-10-308-10/+41
|\ | | | | | | | | | | | | | | - H6 dts(i) sync (Clément) - H6 PIO (Icenowy) - Fix pll1 clock calculation (Stefan) - H6 dram, half DQ (Jernej) - A64 OLinuXino eMMC (Sunil)
| * spi: designware_spi: Disable and free clock when remove driverLey Foon Tan2019-10-251-1/+15
| | | | | | | | | | | | | | | | Disable and free clock when remove driver. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
| * spi: Kconfig: Enable SPI_SUNXI for SUNXIJagan Teki2019-10-251-0/+1
| | | | | | | | | | | | | | | | | | SPI_SUNXI driver is fully dm-aware and the Allwinner architecture kconfig would have logic to enable the DM_SPI. So, select default spi sunxi driver for sunxi architecture. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit (git 2.34.1) at 2024-10-06 08:21:49 +0000