summaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* drivers/net/eepro100.c: Fix compile warningJoe Hershberger2012-05-221-4/+3
| | | | | | | | | | | | | | | Fix this: eepro100.c: In function 'eepro100_initialize': eepro100.c:464:13: warning: assignment from incompatible pointer type eepro100.c: In function 'eepro100_recv': eepro100.c:694:4: warning: passing argument 1 of 'NetReceive' discards qualifiers from pointer target type include/net.h:438:13: note: expected 'uchar *' but argument is of type 'volatile u8 *' The use of a descriptor like this may mean DMA will update this at will Beware this may be a source of trouble on some boards Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/dnet.c: Fix compile warningJoe Hershberger2012-05-221-2/+1
| | | | | | | | | Fix this: dnet.c: In function 'dnet_eth_initialize': dnet.c:380:15: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/dm9000x.c: Fix compile warningJoe Hershberger2012-05-221-2/+1
| | | | | | | | | Fix this: dm9000x.c: In function 'dm9000_initialize': dm9000x.c:636:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/dc2114x.c: Fix compile warningJoe Hershberger2012-05-221-2/+2
| | | | | | | | | Fix this: dc2114x.c: In function 'dc21x4x_initialize': dc2114x.c:305:15: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/cs8900.c: Fix compile warningJoe Hershberger2012-05-221-2/+1
| | | | | | | | | Fix this: cs8900.c: In function 'cs8900_initialize': cs8900.c:326:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/calxedaxgmac.c: Fix compile warningJoe Hershberger2012-05-221-3/+3
| | | | | | | | | | | | Fix this: calxedaxgmac.c: In function 'xgmac_rx': calxedaxgmac.c:479:2: warning: passing argument 1 of 'NetReceive' discards qualifiers from pointer target type include/net.h:438:13: note: expected 'uchar *' but argument is of type 'volatile unsigned char *' calxedaxgmac.c: In function 'calxedaxgmac_initialize': calxedaxgmac.c:547:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/at91_emac.c: Fix compile warningJoe Hershberger2012-05-221-2/+1
| | | | | | | | | Fix this: at91_emac.c: In function 'at91emac_register': at91_emac.c:524:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/armada100_fec.c: Fix compile warningJoe Hershberger2012-05-221-2/+1
| | | | | | | | | Fix this: armada100_fec.c: In function 'armada100_fec_register': armada100_fec.c:723:12: warning: assignment from incompatible pointer type Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/4xx_enet.c: Fix build warningAnatolij Gustschin2012-05-221-2/+1
| | | | | | | | | | | | Fix: 4xx_enet.c: In function 'ppc_4xx_eth_initialize': 4xx_enet.c:2029: warning: assignment from incompatible pointer type Tested on sequoia board. Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Anatolij Gustschin <agust@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* davinci: Fix Ethernet driver interface warningJoe Hershberger2012-05-221-1/+1
| | | | | | | | | | | Fixes: davinci_emac.c: In function 'davinci_emac_initialize': davinci_emac.c:796:12: warning: assignment from incompatible pointer type [enabled by default] Tested on da850_am18xxevm Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* ppc: Fix warning in TSEC Ethernet driverJoe Hershberger2012-05-221-3/+2
| | | | | | | | | | Fixes: tsec.c: In function 'tsec_initialize': tsec.c:638:12: warning: assignment from incompatible pointer type Tested on MPC8313e-RDB Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* drivers/net/mpc512x_fec.c: Fix build warningAnatolij Gustschin2012-05-221-2/+2
| | | | | | | | | | | Fix: mpc512x_fec.c: In function 'mpc512x_fec_initialize': mpc512x_fec.c:634: warning: assignment from incompatible pointer type Tested on mpc5121ads board using tftp and nfs commands. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com>
* drivers/net/mpc5xxx_fec.c: Fix build warningAnatolij Gustschin2012-05-221-1/+1
| | | | | | | | | Fix: mpc5xxx_fec.c: In function 'mpc5xxx_fec_initialize': mpc5xxx_fec.c:920: warning: assignment from incompatible pointer type Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Anatolij Gustschin <agust@denx.de>
* drivers/net/smc911x.c: Fix GCC 4.6 warningAnatolij Gustschin2012-05-221-2/+1
| | | | | | | | smc911x.c: In function 'smc911x_initialize': smc911x.c:288:12: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2012-05-201-60/+62
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-net: net: move bootfile init into eth_initialize net: punt bd->bi_ip_addr net: cosmetic: netconsole.c checkpatch compliance net: cosmetic: tftp.* checkpatch compliance net: cosmetic: sntp.* checkpatch compliance net: cosmetic: rarp.* checkpatch compliance net: cosmetic: nfs.* checkpatch compliance net: cosmetic: net.c checkpatch compliance net: cosmetic: eth.c checkpatch compliance net: cosmetic: bootp.* checkpatch compliance net: cosmetic: net.h checkpatch compliance net: Remove volatile from net API
| * net: cosmetic: netconsole.c checkpatch complianceJoe Hershberger2012-05-151-60/+62
| | | | | | | | | | | | | | | | Requires: --ignore CONSIDER_KSTRTO Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* | FEC: Abstract out register setupMarek Vasut2012-05-151-46/+38
| | | | | | | | | | | | | | | | | | | | | | Abstract out common register setup. This also configured r_cntrl to correct value at registration time. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* | NET: fec_mxc.c: Add a way to disable auto negotiationStefano Babic2012-05-151-1/+3
|/ | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
* powerpc/corenet_ds: Slave module for boot from SRIOLiu Gang2012-04-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the powerpc processors with SRIO interface, boot location can be configured from SRIO1 or SRIO2 by RCW. The processor booting from SRIO can do without flash for u-boot image. The image can be fetched from another processor's memory space by SRIO link connected between them. The processor boots from SRIO is slave, the processor boots from normal flash memory space and can help slave to boot from its memory space is master. They are different environments and requirements: master: 1. NOR flash for its own u-boot image, ucode and ENV space. 2. Slave's u-boot image in master NOR flash. 3. Normally boot from local NOR flash. 4. Configure SRIO switch system if needed. slave: 1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV. 2. Boot location should be set to SRIO1 or SRIO2 by RCW. 3. RCW should configure the SerDes, SRIO interfaces correctly. 4. Slave must be powered on after master's boot. 5. Must define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE because of no ucode locally. For the slave module, need to finish these processes: 1. Set the boot location to SRIO1 or SRIO2 by RCW. 2. Set a specific TLB entry for the boot process. 3. Set a LAW entry with the TargetID SRIO1 or SRIO2 for the boot. 4. Slave's u-boot image should be generated specifically by make xxxx_SRIOBOOT_SLAVE_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
* net: ll_temac: drop obsolete "NAMESIZE" defineStephan Linz2012-04-211-2/+2
| | | | | | | | | | | | | | ... after commit "net/miiphy/serial: drop duplicate NAMESIZE define" (sha1:f6add13) was applied. The building of the new LL TEMAC network driver fails with error below: xilinx_ll_temac.c: In function 'xilinx_ll_temac_initialize': xilinx_ll_temac.c:301: error: 'NAMESIZE' undeclared (first use in this function) xilinx_ll_temac.c:301: error: (Each undeclared identifier is reported only once xilinx_ll_temac.c:301: error: for each function it appears in.) Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Mike Frysinger <vapier@gentoo.org>
* net/designware: Change timeout loop implementationAmit Virdi2012-04-041-16/+38
| | | | | | | The new implementation changes the timeout loop implementation to avoid 1 ms delay in each failing test. It also configures the delay to 10usec. Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net/designware: Set ANAR to 0x1e1Armando Visconti2012-04-041-0/+3
| | | | | | | | This patch forces the advertised capabilities during auto negotiation to always be 10/100 Mbps and half/full as duplexing. Signed-off-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net/designware: Program phy registers when auto-negotiation is ONVikas Manocha2012-04-041-14/+29
| | | | | | | | | | If AN(auto-negotiation) is ON, speed bit of control register are not applicable. Also phy registers were not getting programmed as per the result of AN. This patch sets only AN bit & restart AN bit for AN ON selection & programs PHY registers as per AN result. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net/designware: Try configuring phy on each dw_eth_initVipin Kumar2012-04-042-21/+30
| | | | | | | | | | | | | Phy autonegotiation works only when the ethernet cable is plugged in. Since the phy was configured only at the init time, a plugged in cable was necessary to initialize the phy properly. This patch keeps a flag to check if the phy initialization has succeeded, and calls configure_phy routine at every init if this flag reports otherwise. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net/designware: Consecutive writes must have delayArmando Visconti2012-04-041-2/+1
| | | | | | | | | This patch solves a TX/RX problem which happens at 10Mbps, due to the fact that we are not respecting 4 cyles of the phy_clk (2.5MHz) between two consecutive writes on the same register. Signed-off-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net/designware: Phy address fixVipin KUMAR2012-04-041-1/+1
| | | | | | | | The code assumes the phy address to be > 0, which is not true, the phy address can be in the range 0-31. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net/designware: Fix the max frame length sizeVipin KUMAR2012-04-041-1/+1
| | | | | | | | | The max frame length for normal descriptor can be 0x7FF i.e 2047. It was wrongly specified as 2048. Currently, the max descriptor length is around 1500, so redefining the mask to 1600 Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net/designware: Fix to restore hw mac addressVipin KUMAR2012-04-041-1/+6
| | | | | | | | | The network controller mac resets hardware address stored in MAC_HI and MAC_LO registers if mac is resetted. So, hw mac address needs to be restored in case mac is explicitly resetted from driver. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Amit Virdi <amit.virdi@st.com>
* net: ll_temac: Add LL TEMAC driver to u-bootStephan Linz2012-04-049-0/+1860
| | | | | | | | | | | | | | | Xilinx LocalLink Tri-Mode Ether MAC driver can be used by Xilinx Microblaze or Xilinx ppc405/440 in SDMA and FIFO mode. DCR or XPS bus can be used. The driver uses and requires MII and PHYLIB. CP: 4 warnings: 'Use of volatile is usually wrong' I won't fix this, because it depends on the network driver subsystem. Reported-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Stephan Linz <linz@li-pro.net>
* mvgbe: remove warning for unused methodsStefan Bigler2012-04-031-0/+2
| | | | | | | | | | Some baords may use the GBE interface but they have no phy connected to the interface and a direct MAC/MAC interface. For them we need to get rid of compiler warnings. Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* net/altera_tse: use flush_dcache_range instead of flush_dcacheStefan Kristiansson2012-03-301-3/+6
| | | | | | | | | | flush_dcache is not declared in the common.h API, flush_dcache_range however is Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Ben Warren <biggerbadderben@gmail.com> Cc: Thomas Chou <thomas@wytron.com.tw> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* net/ethoc: use flush_dcache_range instead of flush_dcacheStefan Kristiansson2012-03-301-3/+3
| | | | | | | | | | flush_dcache is not declared in the common.h API, flush_dcache_range however is Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Ben Warren <biggerbadderben@gmail.com> Cc: Thomas Chou <thomas@wytron.com.tw> Acked-by: Thomas Chou <thomas@wytron.com.tw>
* Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2012-03-301-13/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'agust@denx.de' of git://git.denx.de/u-boot-staging: lzma: fix printf warnings Remove CONFIG_SYS_EXTBDINFO from snapper9260.h cmd_pxe.c: fix strict-aliasing warnings net: smc91111: use mdelay() doc: Fix some typos in different files disk/part.c: Fix device enumeration through API mkenvimage: Really set the redundant byte when applicable mkenvimage: Don't try to detect comments in the input file mkenvimage: Use mmap() when reading from a regular file mkenvimage: Read/Write from/to stdin/out by default or if the filename is "-" mkenvimage: More error handling mkenvimage: Correct an include and add a missing one mkenvimage: correct and clarify comments and error messages MAKEALL: display SPL size if present ARMV7/Vexpress: add missing get_ticks() and get_tbclk() mkenvimage: fix usage message cmd_fat: add FAT write command fs/fat/fat_write.c: Fix GCC 4.6 warnings FAT write: Fix compile errors
| * net: smc91111: use mdelay()Mike Frysinger2012-03-271-13/+2
| | | | | | | | | | | | We've already got a mdelay() func in common code, so use that instead. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | net: fec_mxc: allow use with cache enabledEric Nelson2012-03-292-104/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that transmit and receive buffers are cache-line aligned. Invalidate cache for each packet as received, update receive buffer descriptors one cache line at a time, flush cache before transmitting. Original patch by Marek: http://lists.denx.de/pipermail/u-boot/2012-February/117695.html Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
* | net: calxedaxgmac: fix build due to missing __aligned definitionRob Herring2012-03-281-0/+1
|/ | | | | | | Include linux/compiler.h to fix build error due to missing __aligned definition. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* net/miiphy/serial: drop duplicate "NAMESIZE" defineMike Frysinger2012-03-182-2/+2
| | | | | | | | | | A few subsystems are using the same define "NAMESIZE". This has been working so far because they define it to the same number. However, I want to change the size of eth_device's NAMESIZE, so rather than tweak the define names, simply drop references to it. Almost no one does, and the handful that do can easily be changed to a sizeof(). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* net: sh_eth: Remove unnecessary returnNobuhiro Iwamatsu2012-03-081-1/+0
| | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* net: sh_eth: Collect up EDMR_INIT_CNT to TIMEOUT_CNTNobuhiro Iwamatsu2012-03-081-4/+5
| | | | | | | | EDMR_INIT_CNT holds the check count of initialization. Since there were more same values (1000), this collected as TIMEOUT_CNT. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* net: sh_eth: Remove SH_ETH_PHY_DELAYNobuhiro Iwamatsu2012-03-081-2/+0
| | | | | | | SH_ETH_PHY_DELAY is not used. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* sh: sh_eth: Add support SH7724Nobuhiro Iwamatsu2012-03-082-23/+60
| | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* net: phy: make board_phy_config responsible for calling drv->configTroy Kisky2012-02-271-3/+2
| | | | | | | | | Boards may have things they want done before or after normal phy config. Letting the boards call drv->config allows them more flexibilty. Boards affected by this change are corenet_ds and mpc8544ds. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
* net: phy: add support for Micrel's KSZ9021Troy Kisky2012-02-271-0/+87
| | | | | | | | | | | Add the gigabit phy KSZ9021. Also, add function ksz9021_phy_extended_write /_read for access to the phys extended registers. The environment variable "disable_giga" can be used to disable 1000baseTx. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
* net: fec_mxc: add PHYLIB supportTroy Kisky2012-02-272-48/+101
| | | | | | | | | | | | | | | | | | | | | Surround non PHYLIB routines miiphy_restart_aneg and miiphy_wait_aneg with ifndef CONFIG_PHYLIB. When later PHYLIB is required it is easy to delete the non-PHYLIB code. This separation idea came from Andy Fleming. fec_miiphy_read, and fec_miiphy_write changed to fec_phy_read, and fec_phy_write with argument changes. Deprecated miiphy_register is no longer used. Both old and new PHYLIB code now use mdio_register. Cleanup some debug prints. Inline function fec_miiphy_fec_to_eth is no longer necessary. Moved to the single call location. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
* net: fec_mxc: add 1000 Mbps selectionTroy Kisky2012-02-272-2/+21
| | | | | | | | Define FEC_QUIRK_ENET_MAC and add to arch-mx6/imx-regs.h Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
* net: imx: Add multi-FEC support for imx_get_mac_from_fuseFabio Estevam2012-01-162-5/+6
| | | | | | | | | | Add multi-FEC support for imx_get_mac_from_fuse by passing dev_id as a parameter. This feature is important on mx28 SoC for example that has two FEC ports. Cc: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* fec: add the i.mx6q enet driver supportJason Liu2012-01-162-1/+16
| | | | | | Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jason Liu <jason.hui@linaro.org> Acked-by: Stefano Babic <sbabic@denx.de>
* net: add Calxeda xgmac driverRob Herring2012-01-052-0/+554
| | | | | | | | | | This adds ethernet driver for Calxeda xgmac found on Highbank SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Fix: WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'next' of ../nextWolfgang Denk2011-12-232-23/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of ../next: mkenvimage: Add version info switch (-V) mkenvimage: Fix getopt() error handling mkenvimage: Fix some typos phy: add Micrel KS8721BL phy definition net: introduce per device index mvgbe: remove setting of ethaddr within the driver x86: Add support for specifying an initrd with the zboot command x86: Refactor the zboot innards so they can be reused with a vboot image x86: Add infrastructure to extract an e820 table from the coreboot tables x86: Add support for booting Linux using the 32 bit boot protocol x86: Clean up the x86 zimage code in preparation to extend it x86: Import code from coreboot's libpayload to parse the coreboot table x86: Initial commit for running as a coreboot payload CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c CHECKPATCH: ./board/esd/hh405/fpgadata.c CHECKPATCH: ./board/esd/pci405/fpgadata.c CHECKPATCH: ./board/esd/tasreg/fpgadata.c CHECKPATCH: ./board/esd/apc405/fpgadata.c CHECKPATCH: ./board/esd/voh405/fpgadata.c CHECKPATCH: ./board/esd/ash405/fpgadata.c CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c CHECKPATCH: ./board/esd/ar405/fpgadata.c CHECKPATCH: ./board/esd/plu405/fpgadata.c CHECKPATCH: ./board/esd/wuh405/fpgadata.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c CHECKPATCH: ./board/esd/canbt/fpgadata.c CHECKPATCH: ./board/esd/du405/fpgadata.c CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c avr32:mmu.c: fix printf() length modifier fat.c: fix printf() length modifier cmd_sf.c: fix printf() length modifier Make printf and vprintf safe from buffer overruns vsprintf: Move function documentation into header file Add safe vsnprintf and snprintf library functions Move vsprintf functions into their own header Conflicts: tools/mkenvimage.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * phy: add Micrel KS8721BL phy definitionVladimir Zapolskiy2011-12-201-0/+11
| | | | | | | | | | | | | | | | This adds support for the Micrel KS8721BL/SL PHY. The definition is taken from the correspondent datasheet. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
generated by cgit (git 2.34.1) at 2024-11-07 20:36:44 +0000