summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* arm: Remove vexpress_ca15_tc2 boardTom Rini2021-04-101-1/+1
| | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* dm: i2c: allow disabling driver model in SPLIgor Opaniuk2021-02-211-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers. This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL. This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like: ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: Remove ls2080a_simu boardTom Rini2021-02-151-2/+2
| | | | | | | | | | | This board has not been converted to CONFIG_DM_MMC by the deadline of v2019.04, which is almost two years ago. In addition there are other DM migrations it is also missing. Remove it. Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* dm: treewide: Rename 'platdata' variables to just 'plat'Simon Glass2020-12-131-1/+1
| | | | | | | | | | We use 'priv' for private data but often use 'platdata' for platform data. We can't really use 'pdata' since that is ambiguous (it could mean private or platform data). Rename some of the latter variables to end with 'plat' for consistency. Signed-off-by: Simon Glass <sjg@chromium.org>
* i2c: ocores: add i2c driver for OpenCores I2C controllerPragnesh Patel2020-11-281-0/+7
| | | | | | | | | | | | | | Add support for the OpenCores I2C controller IP core (See http://www.opencores.org/projects.cgi/web/i2c/overview). This driver implementation is inspired from the Linux OpenCores I2C driver available. Thanks to Peter Korsgaard <peter@korsgaard.com> for writing Linux OpenCores I2C driver. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Rick Chen <rick@andestech.com>
* xilinx: kconfig: Change Kconfig dependencies for Xilinx driversMichal Simek2020-08-201-1/+1
| | | | | | | | | Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* i2c: add nexell driverStefan Bosch2020-07-291-0/+9
| | | | | | | | | | | | | | | | | Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
* i2c: i2c-cortina: added CAxxxx I2C supportArthur Li2020-07-091-0/+8
| | | | | | | | | | | Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
* i2c: octeon_i2c: Add I2C controller driver for OcteonSuneel Garapati2020-07-091-0/+10
| | | | | | | | | | | | | | | | | Add support for I2C controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Suneel Garapati <sgarapati@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
* rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner2020-05-151-1/+1
| | | | | | Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
* drivers: i2c: add brcm iproc I2C driver supportRayagonda Kokatanur2020-04-201-0/+8
| | | | | | | | | | Add I2C driver support for Broadcom iproc-based socs. Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* i2c: remove i2c driver-model compatibility layerBartosz Golaszewski2019-07-291-12/+1
| | | | | | | | There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: omap24xx_i2c: Adapt driver to support K3 devicesVignesh R2019-07-171-1/+1
| | | | | | | | | | K3 devices have I2C IP that is same as OMAP2+ family. Allow driver to be compiled for ARCH_K3. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* i2c: mxc: Hide kconfig based control in DM_I2C modeTrent Piepho2019-05-171-1/+4
| | | | | | | | | | | | | | | | | | | These options only apply when not using DM_I2C. When using device trees, the dt will enable and control the speeds of the I2C controller(s) and these configuration options have no effect. So disable them in DM_I2C mode. Otherwise they show up as decoys, and make it look like one is enabling I2C controllers and setting the speed when really it's doing nothing. However, a system using a SPL build will not use DM_I2C in the SPL, even if DM_I2C is enabled for the main u-boot. And so the SPL might use the kconfig based I2C speed controls while the main u-boot does not. Cc: Sriram Dash <sriram.dash@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Trent Piepho <tpiepho@impinj.com>
* Kconfig: tegra: Migrate SYS_I2C_TEGRAPeter Robinson2019-02-201-0/+6
| | | | | | | | | | | | | | | | Migrate SYS_I2C_TEGRA from headers to Kconfig Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Heiko Schocher <hs@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Peter.Chubb@data61.csiro.au Cc: Lucas Stach <dev@lynxeye.de> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Alban Bedel <alban.bedel@avionic-design.de> Cc: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* i2c: Remove ancient zynq_i2c driverMichal Simek2019-02-141-33/+0
| | | | | | | This driver is replaced by drivers/i2c/i2c-cdns.c DM based driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: Kconfig: spelling fixesChris Packham2019-01-181-4/+4
| | | | Signed-off-by: Chris Packham <judge.packham@gmail.com>
* i2c: Reflect correct dependency for !DM cadence driverMichal Simek2019-01-151-0/+1
| | | | | | Setup proper DM_I2C dependency. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: xiic: Add Xilinx AXI I2C driverMarek Vasut2019-01-151-0/+6
| | | | | | | | | | | | | | | | | | Add Xilinx AXI I2C controller driver based on the Linux i2c-xiic driver. This driver is stripped of all the IRQ handling and uses pure polling, yet tries to retain most of the structure of the Linux driver to make backporting of fixes easy. Note that the IP has a known limitation on 255 bytes read and write, according to xilinx this is still being worked on [1]. [1] https://forums.xilinx.com/t5/Embedded-Processor-System-Design/AXI-IIC-V2-0-I2C-Master-Reading-multiple-bytes-from-I2C-slave/m-p/854419/highlight/true#M39387 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michal Simek <monstr@monstr.eu> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
* i2c: fix: Add support for the Arm's Versatile Express I2C controllerHeiko Schocher2018-10-121-0/+7
| | | | | | | | | | | | | | | | accidentially while fixing merge errors for patch: https://lists.denx.de/pipermail/u-boot/2018-September/342278.html missed to add files: MAINTAINERS drivers/i2c/Kconfig drivers/i2c/Makefile add them with this patch. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
* Convert CONFIG_SYS_I2C_DAVINCI to KconfigAdam Ford2018-08-171-0/+6
| | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
* i2c: rcar_i2c: Add DM and DT capable I2C driverMarek Vasut2018-05-201-0/+6
| | | | | | | | | Add derivative of the rcar_i2c driver which is capable of probing itself from DM and uses DT. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge git://git.denx.de/u-boot-imxTom Rini2018-04-151-3/+166
|\ | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
| * drivers: i2c: mxc: Update support to 8 I2C controllersSriram Dash2018-03-291-0/+80
| | | | | | | | | | | | | | | | | | | | | | Existing driver supports upto 4 I2C controllers. But some of future NXPs SoCs like lx2160a has eight I2C controllers. Update MXC driver to support upto 8 I2C controllers Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in KconfigSriram Dash2018-03-291-3/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* | arm: stm32: add new architecture for STM32MP familyPatrick Delaunay2018-03-191-1/+1
|/ | | | | | | | | | | - add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* i2c: Added kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1Vipul Kumar2018-03-011-0/+12
| | | | | | | | | This patch added Kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1 and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEEDVipul Kumar2018-03-011-0/+7
| | | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED and set it to default value 100000. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVEVipul Kumar2018-03-011-0/+7
| | | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE and set it default to 0. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQVipul Kumar2018-03-011-0/+6
| | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: rcar_iic: Allow IIC on RCar Gen2Marek Vasut2018-02-171-1/+1
| | | | | | | The IIC on Gen2 is compatible with this driver as well, allow it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* i2c: ihs_i2c: Make DM compatibleMario Six2018-02-061-0/+6
| | | | | | | | | | Make the ihs_i2c driver DM-compatible; for legacy boards, the old functions are retained within #ifdefs. No board uses the new DM driver yet; this patch only lays the foundation for future support. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* Convert CONFIG_SYS_OMAP24_I2C_SLAVE et al to KconfigAdam Ford2018-01-301-0/+14
| | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_OMAP24_I2C_SLAVE CONFIG_SYS_OMAP24_I2C_SPEED Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
* i2c: meson: improve Kconfig descriptionBeniamino Galvani2017-12-071-1/+6
| | | | | | | | Expand the Kconfig description with hardware features. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* i2c: rcar_iic: Add RCar IIC driverMarek Vasut2017-11-301-0/+6
| | | | | | | | | Add driver for the RCar IIC or DVFS I2C controller. This driver is based on the SH I2C driver, but supports DM and DT probing as well as modern I2C framework API. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* i2c: add Amlogic Meson driverBeniamino Galvani2017-11-201-0/+6
| | | | | | | Add a driver for the I2C controller available on Amlogic Meson SoCs. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
* Convert CONFIG_SYS_I2C_BUS_MAX to KconfigAdam Ford2017-09-011-0/+10
| | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_BUS_MAX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Fix AM43XX drop AM44XX] Signed-off-by: Tom Rini <trini@konsulko.com>
* i2c: add i2c driver for stm32Patrice Chotard2017-08-231-0/+20
| | | | | | | | | | | | | | | | | | | | | | Add i2c driver which can be used on both STM32F7 and STM32H7. This I2C block supports the following features: _ Slave and master modes _ Multimaster capability _ Standard-mode (up to 100 kHz) _ Fast-mode (up to 400 kHz) _ Fast-mode Plus (up to 1 MHz) _ 7-bit and 10-bit addressing mode _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask) _ All 7-bit addresses acknowledge mode _ General call _ Programmable setup and hold times _ Easy to use event management _ Optional clock stretching _ Software reset Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SYS_I2C_OMAP24XX to KconfigAdam Ford2017-08-101-0/+6
| | | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_OMAP24XX Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* dm: Rename dev_addr..() functionsSimon Glass2017-06-011-1/+0
| | | | | | | | | | | | | | | | | | | These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
* aspeed: Add I2C Drivermaxims@google.com2017-05-081-0/+9
| | | | | | | | | | Add Device Model based I2C driver for ast2500/ast2400 SoCs. The driver is very limited, it only supports master mode and synchronous byte-by-byte reads/writes, no DMA or Pool Buffers. Signed-off-by: Maxim Sloyko <maxims@google.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: Set default I2C bus numberLukasz Majewski2017-03-281-0/+14
| | | | | | | | | | This patch allows using i2c commands (e.g. "i2c probe", "i2c md", etc) without the need to first select the bus number with e.g. "i2c dev 0". This is the "i2c" command behavior similar to the one from pre DM, where by default bus 0 was immediately accessible. Signed-off-by: Lukasz Majewski <lukma@denx.de>
* i2c: lpi2c: add lpi2c driver for i.MX7ULPPeng Fan2017-03-171-0/+6
| | | | | | | | | | | Add lpi2c driver for i.MX7ULP. Need to enable the two options to use this driver: CONFIG_DM_I2C=y CONFIG_SYS_I2C_IMX_LPI2C=y Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* i2c: sandbox: remove code snippet from Kconfig helpMasahiro Yamada2017-02-131-22/+1
| | | | | | | | | | | | | | | With the Kconfig re-sync with Linux 4.10, characters such as '}', ';' in Kconfig help message cause warnings: $ make defconfig *** Default configuration is based on 'sandbox_defconfig' drivers/i2c/Kconfig:132:warning: ignoring unsupported character '}' drivers/i2c/Kconfig:132:warning: ignoring unsupported character ';' Drop the Device Tree fragment from the help. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* i2c: Kconfig: Add SYS_I2C_S3C24X0 entryJaehoon Chung2017-01-181-0/+5
| | | | | | | Adding Kconfig for SYS_I2C_S3C24X0. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* i2c: Kconfig: Add SYS_I2C_MXC entryJagan Teki2016-12-161-0/+8
| | | | | | | | | | Added kconfig for SYS_I2C_MXC driver. Cc: Stefano Babic <sbabic@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-08-151-0/+10
|\
| * i2c: atmel: add i2c driverSongjun Wu2016-08-151-0/+10
| | | | | | | | | | | | | | | | Add i2c driver. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Reviewed-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* | i2c: add Tegra186 BPMP driverStephen Warren2016-08-151-0/+10
|/ | | | | | | | | | | On Tegra186, some I2C controllers are directly controlled by the main CPU, whereas others are controlled by the BPMP, and can only be accessed by the main CPU via IPC requests to the BPMP. This driver covers the latter case. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* i2c: mvtwsi: Add compatibility to DMmario.six@gdsys.cc2016-07-261-0/+7
| | | | | | | | | | | | | | | | | This patch adds the necessary functions and Kconfig entry to make the MVTWSI I2C driver compatible with the driver model. A possible device tree entry might look like this: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; clock-frequency = <100000>; u-boot,i2c-slave-addr = <0x0>; }; Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit (git 2.34.1) at 2024-10-09 22:20:10 +0000