summaryrefslogtreecommitdiffstats
path: root/doc
Commit message (Collapse)AuthorAgeFilesLines
* MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.Alex Nemirovsky2020-02-071-0/+2
| | | | | | | | | | | | Assign Alex Nemirovsky as custodian for all Cortina Access (CA) for ARM and MIPS based SoCs. Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com>
* cmd: gpio: Correct do_gpio() return valueLuka Kovacic2020-02-071-2/+2
| | | | | | | | | | | | | | Use the correct return value in function do_gpio() and update commands documentation with the return values from command_ret_t enum. CMD_RET_SUCCESS is returned on command success and CMD_RET_FAILURE is returned on command failure. The command was returning the pin value, which caused confusion when debugging (#define DEBUG). Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr> Tested-by: Robert Marko <robert.marko@sartura.hr>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini2020-02-042-71/+54
|\ | | | | | | | | | | | | | | | | | | | | | | - Various minor fixes for x86 - Switch to ACPI mode on Intel edison - Support run-time configuration for NS16550 driver - Update coreboot and slimbootloader serial drivers to use NS16550 run-time configuration - ICH SPI driver fixes to hardware sequencing erase case - Move ITSS from Apollo Lake to a more generic location - Intel GPIO driver bug fixes - Move to vs2017-win2016 platform build host for Azure pipelines
| * doc: Chromebook Coral: fix build warningsHeinrich Schuchardt2020-02-041-44/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use valid restructured text to avoid warnings like WARNING: Title underline too short. WARNING: Block quote ends without a blank line; unexpected unindent. when building with `make htmldocs`. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * doc: intel: Update serial driver changes in slimbootloader.rstPark, Aiden2020-02-041-27/+8
| | | | | | | | | | | | | | | | | | Now, Slim Bootloader uses NS16550_DYNAMIC to support serial port configuration at runtime, so no more code change is required. Therefore, remove unnecessary steps and fix minor typo. Signed-off-by: Aiden Park <aiden.park@intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | doc: android: Convert to Sphinx formatSam Protsenko2020-02-049-292/+347
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | doc: android: Add documentation for Android Boot ImageSam Protsenko2020-02-041-0/+154
|/ | | | | | | | Describe Android Boot Image format, how its support is implemented in U-Boot and associated commands usage. Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* doc: boards: Add rockchip documentationJagan Teki2020-01-302-0/+140
| | | | | | | | | | | | | | | | | | | | Rockchip has documentation file, doc/README.rockchip but which is not so readable to add or understand the existing contents. Even the format that support is legacy readme in U-Boot. Add rockchip specific documentation file using new rst format, which describes the information about Rockchip supported boards and it's usage steps. Added minimal information about rk3288, rk3328, rk3368 and rk3399 boards and usage. This would indeed updated further based on the requirements and updates. Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* i2c: designware_i2c: Bring in the binding fileSimon Glass2020-01-271-0/+73
| | | | | | | Bring in this file from Linux v5.4. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* MAINTAINERS: Update ARM TI entryLokesh Vutla2020-01-201-1/+2
| | | | | | | | Take over TI maintainership from Tom. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMAVignesh Raghavendra2020-01-151-1/+1
| | | | | | | | | Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* efi_loader: document functions in efi_rng.cHeinrich Schuchardt2020-01-151-0/+6
| | | | | | Add the missing Sphinx documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* rtc: add support for DS3232 deviceHan Nandor2020-01-101-0/+15
| | | | | | | | | | DS3232 is an i2c RTC with 236 bytes of battery-backed SRAM. Add an RTC driver for DS3232 device, which provides time and date support. Also read and write functions are provided, which can be used to access the SRAM memory. Signed-off-by: Nandor Han <nandor.han@vaisala.com>
* drivers: fsl_mcdmafec: conversion to dmAngelo Durgehello2020-01-101-0/+35
| | | | | | Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
* drivers: mcffec: conversion to dmAngelo Durgehello2020-01-101-0/+22
| | | | | | Full conversion to dm for all boards, legacy code removed. Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2020-01-091-2/+6
|\ | | | | | | - DFU updates
| * dfu: Add optional timeout parameterAndy Shevchenko2020-01-071-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the `dfu` command is called from the U-Boot environment, it now accepts an optional parameter that specifies a timeout (in seconds). If a DFU connection is not made within that time the `dfu` command exits (as it would if Ctrl+C was pressed). If the timeout is left empty or being zero the `dfu` command behaves as it does now. This is useful for allowing U-Boot to check to see if anything wants to upload new firmware before continuing to boot. The patch is based on the commit https://github.com/01org/edison-u-boot/commit/5e966ccc3c65c18c9783741fa04e0c45e021780c by Sebastien Colleur, which has been heavily reworked due to U-Boot changes in the past. Signed-off-by: Brad Campbell <bradjc5@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* | doc: uefi.rst: Document launching UEFI binaries from FIT imagesCristian Ciocaltea2020-01-071-0/+34
| | | | | | | | | | | | | | | | | | This patch adds a new section "Launching a UEFI binary from a FIT image" documenting the usage of the CONFIG_BOOTM_EFI extension to bootm command that offers a verified boot alternative for UEFI binaries such as GRUB2. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | doc: Add sample uefi.its image description fileCristian Ciocaltea2020-01-071-0/+67
|/ | | | | | | | This patch adds an example FIT image description file demonstrating the usage of bootm command to securely launch UEFI binaries. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* Merge branch 'next'Tom Rini2020-01-066-0/+366
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <trini@konsulko.com> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <trini@konsulko.com> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <trini@konsulko.com> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <trini@konsulko.com> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
| * x86: Add chromebook_coralSimon Glass2019-12-152-0/+242
| | | | | | | | | | | | | | | | | | Add support for coral which is a range of Apollo Lake-based Chromebook released in 2017. This also includes reef released in 2016, since it is based on the same SoC. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Add a generic Intel GPIO driverSimon Glass2019-12-151-0/+55
| | | | | | | | | | | | | | | | | | Add a GPIO driver which uses the pinctrl driver to access the pad information. This driver relies on the GPIO nodes being subnodes to the pinctrl device. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * x86: Add a generic Intel pinctrl driverSimon Glass2019-12-151-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent Intel SoCs share a pinctrl mechanism with many common elements. Add an implementation of this core functionality, allowing SoC-specific drivers to avoid adding common code. As well as a pinctrl driver this provides a GPIO driver based on the same code. Once other SoCs use this driver we may consider moving more properties to the device tree (e.g. the community info and pad definitions). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: doc: Add a note about of-platdata and header filesSimon Glass2019-12-151-0/+6
| | | | | | | | | | | | | | | | We don't want to include dt-structs.h in header files, so add a note about that. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * dm: pci: Allow delaying auto-config until after relocationSimon Glass2019-12-151-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | At present PCI auto-configuration happens in U-Boot both before and after relocation. This is a waste of time and may mess up static addresses used in board_init_f(). Adjust the code to supporting doing auto-configuration once, after relocation, under control of a device-tree property. This is needed for Apollo Lake for debugging the silicon-init code. Once the UART is moved to a different MMIO address the debug UART does not work and any debug output in Apollo Lake's arch_fsp_init_r() causes a hang. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | doc: rockchip: document packing second level loader with mkimageJeffy Chen2019-12-271-0/+11
| | | | | | | | | | | | | | | | Add documentation about packing optional second level boot-loader with mkimage tool. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* | doc: rockchip: Fix reference the wrong defconfig name of ROC-CC-RK3308Andy Yan2019-12-271-2/+2
| | | | | | | | | | | | | | | | | | | | The defconfig file for ROC-CC-RK3308 is roc-cc-rk3308_defconfig. Fixes: 7f08bfb74f04 ("doc: rockchip: Add documentation for rk3308 based boards") Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* | doc: fitImage: example of a signature nodeHeinrich Schuchardt2019-12-131-0/+62
| | | | | | | | | | | | | | | | | | Describe that a signature node can be added to a binary device tree using the mkimage tool. Provide an example device tree node. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | doc: really get rid of Documentation/ directoryRasmus Villemoes2019-12-131-7/+48
|/ | | | | | | | | | | | | | Commit 656d8da9d2 (doc: Remove duplicated documentation directory) got rid of most of Documentation/. But there's still an obviously useless .gitignore left behind. Also, there's a copy of the linux kernel's net/ethernet.txt binding imported from v5.0, while the existing one in doc/ is from 4.0-rc1. So replace the latter by the former, and making Documentation/ finally empty. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini2019-12-092-7/+207
|\ | | | | | | | | | | | | | | - Increase stack size to avoid a stack overflow during distro boot. - Add hifive-unleashed-a00.dts for SIFIVE FU540. - Add OF_SEPARATE support for SIFIVE FU540. - Add SPL support for Andes AX25 AE350. - Improve U-Boot SPL / OpenSBI smp boot flow for RISC-V.
| * doc: update AX25-AE350 RISC-V documentationRick Chen2019-12-101-3/+206
| | | | | | | | | | | | | | | | Add descriptions about U-Boot SPL feature and how to build and run. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
| * Use dts support from U-Boot via OF_SEPARATE instead of depending from opensbi.Rick Chen2019-12-101-4/+1
| | | | | | | | | | | | | | | | | | | | | | This would help to make the necessary changes in drivers and device trees in U-Boot tree itself. This feature would also be helpful to not pass dtb during opensbi builds. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Signed-off-by: Rick Chen <rick@andestech.com>
* | doc: bindings: Aquantia PHY node bindingAlex Marginean2019-12-091-0/+25
| | | | | | | | | | | | | | | | | | A couple of optional properties have been introduced for Aquantia PHY allowing the driver to set up wiring related configuration points that are otherwise driven by firmware. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | doc: bindings: add bindings document for PHY nodesAlex Marginean2019-12-091-0/+24
| | | | | | | | | | | | | | | | | | It defines that PHY nodes must be children on MDIO bus nodes and defines the only required property in U-Boot, reg. This property along with the example provided are copied over from Linux. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | dt-bindings: phy: dp83867: Add documentation for disabling clock outputGrygorii Strashko2019-12-091-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on commit 980066e6d964 ("dt-bindings: phy: dp83867: Add documentation for disabling clock output") of mainline linux kernel. The clock output is generally only used for testing and development and not used to daisy-chain PHYs. It's just a source of RF noise afterward. Add a mux value for "off". I've added it as another enumeration to the output property. In the actual PHY, the mux and the output enable are independently controllable. However, it doesn't seem useful to be able to describe the mux setting when the output is disabled. Document that PHY's default setting will be left as is if the property is omitted. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | net: Always build the string_to_enetaddr() helperJoe Hershberger2019-12-091-2/+2
|/ | | | | | | | | | | | Part of the env cleanup moved this out of the environment code and into the net code. However, this helper is sometimes needed even when the net stack isn't included. Move the helper to lib/net_utils.c like it's similarly-purposed string_to_ip(). Also rename the moved function to similar naming. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Ondrej Jirman <megous@megous.com>
* doc: add README for asn1 compiler and decoderAKASHI Takahiro2019-12-061-0/+40
| | | | | | | This document gives a brief description about ASN1 compiler as well as ASN1 decoder. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
* doc: rockchip: Update build instruction for rk3308Andy Yan2019-12-051-1/+0
| | | | | | | | | | After commit d8765e2422cd ("Enable building of u-boot.itb on Rockchip platform"), u-boot.itb will automatically generated by "make all" command, manually command "make u-boot.itb" is no longer needed. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* bootm: vxworks: Support Linux compatible standard DTB for ARM and PPCLihua Zhao2019-12-031-0/+13
| | | | | | | | | | | Enhance do_bootm_vxworks() to support Linux compatible standard DTB for ARM and PPC, when the least significant bit of flags in VxWorks bootargs is set. Otherwise it falls back to the existing bootm flow which is now legacy. Signed-off-by: Lihua Zhao <lihua.zhao@windriver.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* cosmetic: Fix spelling and whitespace errorsThomas Hebb2019-12-033-3/+3
| | | | Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
* doc: rockchip: Add documentation for rk3308 based boardsAndy Yan2019-11-171-1/+91
| | | | | | | Add build documentation for rk3308 based boards. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* Merge tag 'u-boot-rockchip-20191110' of ↵Tom Rini2019-11-111-0/+27
|\ | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.
| * dm: regulator: support regulator more stateJoseph Chen2019-11-101-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | support parse regulator standard property: regulator-off-in-suspend; regulator-init-microvolt; regulator-suspend-microvolt: regulator_get_suspend_enable regulator_set_suspend_enable regulator_get_suspend_value regulator_set_suspend_value Signed-off-by: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* | freescale/powerpc: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal2019-11-081-4/+4
|/ | | | | | | | Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid conflicts with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2019-11-061-0/+270
|\ | | | | | | | | - DFU updates - USB Storage updates
| * dfu: add callback for flush and initiated operationPatrick Delaunay2019-10-311-0/+8
| | | | | | | | | | | | | | | | | | | | | | Add weak callback to allow board specific behavior - flush - initiated This patch prepare usage of DFU back end for communication with STM32CubeProgrammer on stm32mp1 platform with stm32prog command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * dfu: add DFU virtual backendPatrick Delaunay2019-10-311-1/+31
| | | | | | | | | | | | | | | | Add a virtual DFU backend to allow board specific read and write (for OTP update for example). Acked-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * dfu: add partition support for MTD backendPatrick Delaunay2019-10-311-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the support of MTD partition for the MTD backend. The expected dfu_alt_info for one alternate on the mtd device : <name> part <part_id> <name> partubi <part_id> "partubi" also erase up to the end of the partition after write operation. For example: dfu_alt_info = "spl part 1;u-boot part 2; UBI partubi 3" U-Boot> dfu 0 mtd nand0 Acked-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * dfu: add backend for MTD devicePatrick Delaunay2019-10-311-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DFU backend for MTD device: allow to read and write on all MTD device (NAND, SPI-NOR, SPI-NAND,...) For example : > set dfu_alt_info "nand_raw raw 0x0 0x100000" > dfu 0 mtd nand0 This MTD backend provides the same level than dfu nand backend for NAND and dfu sf backend for SPI-NOR; So it can replace booth of them but it also add support of spi-nand. > set dfu_alt_info "nand_raw raw 0x0 0x100000" > dfu 0 mtd spi-nand0 The backend code is based on the "mtd" command introduced by commit 5db66b3aee6f ("cmd: mtd: add 'mtd' command") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
| * dfu: allow to manage DFU on several devicesPatrick Delaunay2019-10-311-3/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of DFU for several interface/device with one command. The format for "dfu_alt_info" in this case is : - <interface> <dev>'='alternate list (';' separated) - each interface is separated by '&' The previous behavior is always supported. One example for NOR (bootloaders) + NAND (rootfs in UBI): U-Boot> env set dfu_alt_info \ "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \ u-boot-env part 0 3&nand 0=UBI partubi 0,3" U-Boot> dfu 0 list DFU alt settings list: dev: SF alt: 0 name: spl layout: RAW_ADDR dev: SF alt: 1 name: ssbl layout: RAW_ADDR dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR dev: NAND alt: 3 name: UBI layout: RAW_ADDR U-Boot> dfu 0 $> dfu-util -l Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=3, name="UBI", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=1, name="u-boot", serial="002700333338511934383330" Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ intf=0, alt=0, name="spl", serial="002700333338511934383330" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-11-19 06:45:26 +0000