diff options
| author | Patrick Delaunay <patrick.delaunay@st.com> | 2019-10-14 09:28:04 +0200 |
|---|---|---|
| committer | Marek Vasut <marek.vasut+renesas@gmail.com> | 2019-10-31 12:12:31 +0100 |
| commit | 6015af28ee6d44d6c7b21f3844c90df9239f66f4 (patch) | |
| tree | f8c5156bbaa7ad4838688da410e1ef88a5769d59 /doc | |
| parent | 0de1022d885a4a637cae2955b4e32e1407696429 (diff) | |
| download | u-boot-6015af28ee6d44d6c7b21f3844c90df9239f66f4.tar.gz u-boot-6015af28ee6d44d6c7b21f3844c90df9239f66f4.tar.xz u-boot-6015af28ee6d44d6c7b21f3844c90df9239f66f4.zip | |
dfu: add backend for MTD device
Add DFU backend for MTD device: allow to read
and write on all MTD device (NAND, SPI-NOR,
SPI-NAND,...)
For example :
> set dfu_alt_info "nand_raw raw 0x0 0x100000"
> dfu 0 mtd nand0
This MTD backend provides the same level than dfu nand
backend for NAND and dfu sf backend for SPI-NOR;
So it can replace booth of them but it also
add support of spi-nand.
> set dfu_alt_info "nand_raw raw 0x0 0x100000"
> dfu 0 mtd spi-nand0
The backend code is based on the "mtd" command
introduced by commit 5db66b3aee6f ("cmd: mtd:
add 'mtd' command")
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.dfu | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/doc/README.dfu b/doc/README.dfu index d1ef7e4064..96bced39d8 100644 --- a/doc/README.dfu +++ b/doc/README.dfu @@ -21,6 +21,7 @@ Overview: - NAND - RAM - SF (serial flash) + - MTD (all MTD device: NAND, SPI-NOR, SPI-NAND,...) These DFU backends are also used by - the dfutftp (see README.dfutftp) @@ -30,6 +31,7 @@ Configuration Options: CONFIG_DFU CONFIG_DFU_OVER_USB CONFIG_DFU_MMC + CONFIG_DFU_MTD CONFIG_DFU_NAND CONFIG_DFU_RAM CONFIG_DFU_SF @@ -104,6 +106,13 @@ Commands: with <partid> is the MTD partition index + "mtd" (all MTD device: NAND, SPI-NOR, SPI-NAND,...) + cmd: dfu 0 mtd <dev> + with <dev> the mtd identifier as defined in mtd command + (nand0, nor0, spi-nand0,...) + each element in "dfu_alt_info" = + <name> raw <offset> <size> raw access to mtd device + <interface> and <dev> are absent: the dfu command to use multiple devices cmd: dfu 0 list @@ -114,6 +123,7 @@ Commands: nand <dev>=<alt1>;....;<altN> ram <dev>=<alt1>;....;<altN> sf <dev>=<alt1>;....;<altN> + mtd <dev>=<alt1>;....;<altN> Host tools: |