summaryrefslogtreecommitdiffstats
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* arm: Add support for Kobol Helios64 boardHEADmasterChristian Glombek2021-06-121-0/+140
| | | | | | | | | | | | | | The hardware is described in detail on Kobol's wiki at https://wiki.kobol.io/helios64/intro/. This commit is based on downstream work in Armbian by Aditya Prayoga [1]. The devicetree is taken from Linux v5.12-rc1 and was originally submitted there by Uwe Kleine-Koenig [2]. [1] https://github.com/ukleinek/armbian-build/blob/35c85295d351830aa59b624db524ba04b238faae/patch/kernel/rockchip64-current/add-board-helios64.patch [2] https://github.com/torvalds/linux/blob/7a7fd0de4a9804299793e564a555a49c1fc924cb/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts Signed-off-by: Dennis Gilmore <dennis@ausil.us>
* arm: mvebu: turris_mox: enable options for Turris network bootMarek Behún2021-06-101-0/+8
| | | | | | | | | Enable configuration options to support Turris network boot. This includes FIT support and some crypto commands. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
* arm: mvebu: turris_mox: add support for board rescue modeMarek Behún2021-06-101-0/+6
| | | | | | | | | | | | | | | | | | Add necessary config options and board code to support board factory reset / rescue mode on Turris MOX. In order to also support invoking rescue mode from U-Boot console, without having to press the factory reset button, put the rescue command into `bootcmd_rescue` default environment variable. When factory reset button is pressed, invoke rescue mode via distroboot by setting `boot_targets` to `rescue`. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
* configs: Resync with savedefconfigTom Rini2021-06-0712-68/+13
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* pico-imx6ul: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin2021-06-053-6/+6
| | | | | | | | | These boards were not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Richard Hu <richard.hu@technexion.com> Cc: Fabio Estevam <festevam@gmail.com>
* brxre1: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin2021-06-051-2/+2
| | | | | | | | The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
* mx28evk: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin2021-06-054-12/+12
| | | | | | | | The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Fabio Estevam <festevam@gmail.com>
* siemens: pxm2: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin2021-06-051-2/+2
| | | | | | | The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* siemens: rut: disable video after DM_VIDEO conversion deadlineAnatolij Gustschin2021-06-051-3/+2
| | | | | | | The board was not converted to DM_VIDEO before deadline, so disable video support for now. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* board: sifive: add HiFive Unmatched board supportGreen Wan2021-05-311-0/+54
| | | | | | | | Add defconfig and board support for HiFive Unmatched. Signed-off-by: Green Wan <green.wan@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
* configs: stm32mp: Enable UNZIP on STMicroelectronics stm32mp15 boardsPatrick Delaunay2021-05-282-0/+2
| | | | | | | | The CMD_UNZIP provides the 'gzwrite' command, which is convenient for writing e.g. gz-compressed images to eMMC from U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* ARM: stm32: Enable UNZIP on DHSOM by defaultMarek Vasut2021-05-282-0/+2
| | | | | | | | | | | The CMD_UNZIP provides the 'gzwrite' command, which is convenient for writing e.g. gz-compressed images to eMMC from U-Boot. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
* Merge tag 'ti-v2021.07-rc4' of ↵Tom Rini2021-05-271-0/+1
|\ | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-ti - Fix reset for AM64 platforms - Enable networking PHY driver for AM64 - Fix default R5F cluster setting in J7
| * configs: am64x_evm_a53_defconfig: Enable DP83867 PHY driverVignesh Raghavendra2021-05-271-0/+1
| | | | | | | | | | | | | | | | | | AM64x GP and SK EVM have DP83867 PHY connected to CPSW external port0. Enable the driver in order to use ethernet at U-Boot prompt. CONFIG_PHY_TI is selected by CONFIG_PHY_TI_DP83867 and thus can be dropped. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | configs: Resync with savedefconfigTom Rini2021-05-2519-23/+16
| | | | | | | | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* | MIPS: remove deprecated qemu_mips boardDaniel Schwierzeck2021-05-254-114/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove qemu_mips boards because DM migration doesn't make sense. The board support for qemu_mips is already marked as deprecated in Qemu in favour of the Malta board. Also qemu_mips support has been removed from Linux a long time ago. The official replacement is the Malta board. The same Malta U-Boot image can be used with Qemu and on physical hardware. All combinations of Big Endian and Little Endian as well as 32 bit and 64 bit are supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | mips: octeon: octeon_ebb7304_defconfig: Fix CFI flash setupStefan Roese2021-05-251-2/+3
|/ | | | | | | | | | This patch makes the necessary adjustments in the defconfig to fully support the CFI flash on the Octeon EBB7304. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* ARM: enable LTO for some boardsMarek Behún2021-05-2414-0/+14
| | | | | | | | | | Enable LTO for some boards that were tested by people on U-Boot Mailing List. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Adam Ford <aford173@gmail.com> Tested-by: Pali Rohár <pali@kernel.org> Tested-by: Tim Harvey <tharvey@gateworks.com>
* Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini2021-05-206-0/+10
|\
| * riscv: ae350: Increase malloc size for binman spl flowRick Chen2021-05-194-0/+4
| | | | | | | | | | | | | | | | It will need larger heap size for u-boot-spl to load u-boot.itb which be generated from binman than USE_SPL_FIT_GENERATOR. Signed-off-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * riscv: Drop USE_SPL_FIT_GENERATORBin Meng2021-05-197-7/+0
| | | | | | | | | | | | | | | | | | Now that we have switched to binman to generate u-boot.itb for all RISC-V boards, USE_SPL_FIT_GENERATOR is no longer needed and can be dropped. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * riscv: ae350: Switch to use binman to generate u-boot.itbBin Meng2021-05-194-0/+8
| | | | | | | | | | | | | | | | | | Use the new BINMAN_STANDALONE_FDT option for AE350 based SPL defconfigs, so that binman is now used to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
| * riscv: qemu: Switch to use binman to generate u-boot.itbBin Meng2021-05-192-0/+4
| | | | | | | | | | | | | | | | | | By utilizing the newly introduced BINMAN_STANDALONE_FDT option, along with a new dedicated device tree source file for the QEMU virt target used for binman only, we can now use binman to generate u-boot.itb. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * riscv: sifive: unleashed: Switch to use binman to generate u-boot.itbBin Meng2021-05-191-0/+1
| | | | | | | | | | | | | | | | | | At present SiFive Unleashed board uses the Makefile to create the FIT, using USE_SPL_FIT_GENERATOR, which is deprecated as per the Makefile warning. Update to use binman instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | xilinx: zynqmp: Enable DM_RTC/emul driver/cmd date/gettime and efi settimeMichal Simek2021-05-191-0/+4
| | | | | | | | | | | | | | Right now U-Boot is not aware about date/time that's why enable it by default also with EFI runtime service for setting time. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | xilinx: versal: Enable CONFIG_POSITION_INDEPENDENTT Karthik Reddy2021-05-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot expects to be linked to a specific hard-coded address and to be loaded to and run from that address. CONFIG_POSITION_INDEPENDENT config lifts that restriction & allowing the code to be loaded to and executed from almost any address. As we enabled CONFIG_POSITION_INDEPENDENT, CONFIG_INIT_SP_RELATIVE is enabled by default, where it will set the early stack pointer at runtime by adding an offset value to &_bss_start. The offset value is taken from SYS_INIT_SP_BSS_OFFSET. SYS_INIT_SP_BSS_OFFSET offset should be large enough so that the early malloc region, global data (gd), and early stack should fit. With commit d8fabcc424bd ("arm64: versal: Increase SYS_MALLOC_F_LEN") SYS_MALLOC_F_LEN is increased from 32KB to 1MB, so we need to accommodate this space with SYS_INIT_SP_BSS_OFFSET. Hence increasing SYS_INIT_SP_BSS_OFFSET to 1.5MB. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Acked-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | arm64: zynqmp: Add description for SOM/Kria boardsMichal Simek2021-05-191-1/+1
|/ | | | | | | | | | | | The patch contains several DT files for SOM platform. Carrier card is sck-kv (KV260) revA/B. SMK-K26 is description for starter kit which doesn't have EMMC populated. And SM-K26 is full som with EMMC. Files are divided in this way to make sure that SOM can be plugged to different carrier card and all peripherals on SOM (or defined by a spec) can be used by U-Boot. Full DT for SOM+CC can be merged together as overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: octeontx2: Add Octeon TX2 CN913x DB supportKonstantin Porotchkin2021-05-161-0/+89
| | | | | | | | | | This patch adds the base support for the Marvell Octeon TX2 CN913x DB. Only one defconfig is added with this patch. Other board variants are available (NAND, MMC booting) and images for these boards can be generated by following the documentation added in the included README. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
* mvebu: x530: Reduce SPL image sizeStefan Roese2021-05-161-1/+1
| | | | | | | | | | | | | | | | | | | Currently, building U-Boot for x530 fails since the SPL image is too big. This patch reduces the SPL size by changing the following Kconfig options: Enable CONFIG_SPL_TINY_MEMSET Disable CONFIG_SPI_FLASH_BAR By disabling CONFIG_SPI_FLASH_BAR, the tiny SPI NOR framework can be used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Pratyush Yadav <p.yadav@ti.com> Cc: Tom Rini <trini@konsulko.com> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Pratyush Yadav <p.yadav@ti.com>
* configs: Resync with savedefconfigTom Rini2021-05-1510-32/+2
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* riscv: Enable AI ram on K210Sean Anderson2021-05-141-0/+2
| | | | | | | | We just need to initialize all the clocks pre-reloc. The clock driver creates a bunch of devices, so we need to increase the pre-reloc malloc arena. Signed-off-by: Sean Anderson <seanga2@gmail.com>
* configs: CHIP: add support for DIP detect functionalityKory Maincent2021-05-131-0/+1
| | | | | | | | | This commit enables using the extension board detection mechanism on CHIP boards Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Andre Przywara <andre.przywara@arm.com>
* cmd: add support for a new "extension" commandKory Maincent2021-05-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new "extension" command, which aims at detecting extension boards connected to the hardware platform, and apply the Device Tree overlays that describe the hardware present on those extension boards. In order to enable this mechanism, board-specific code must implement the extension_board_scan() function that fills in a linked list of "struct extension", each describing one extension board. In addition, the board-specific code must select the SUPPORT_EXTENSION_SCAN Kconfig boolean. Based on this: - "extension scan" makes the generic code call the board-specific extension_board_scan() function to retrieve the list of detected extension boards. - "extension list" allows to list the detected extension boards. - "extension apply <number>|all" allows to apply the Device Tree overlay(s) corresponding to one, or all, extension boards The latter requires two environment variables to exist and set one variable to run: - extension_overlay_addr: the RAM address where to load the Device Tree overlays - extension_overlay_cmd: the U-Boot command to load one overlay. Indeed, the location and mechanism to load DT overlays is very setup specific. - extension_overlay_name: set by the command: the name of the DT which will be load during the execution. When calling the command described in the extension_overlay_cmd variable, the variable extension_overlay_name will be defined. So a typical extension_overlay_cmd will look like this: extension_overlay_cmd=load mmc 0:1 $extension_overlay_addr /boot/$extension_overlay_name Here is an example on how to use it: => run loadfdt => fdt addr $fdtaddr => setenv extension_overlay_addr 0x1000 => setenv extension_overlay_cmd 'load mmc 0:1 ${extension_overlay_addr} /boot/${extension_overlay_name}' => extension scan Found 1 extension board(s). => extension apply 0 519 bytes read in 3 ms (168.9 KiB/s) Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Maxime Ripard <maxime@cerno.tech>
* Merge tag 'ti-v2021.07-rc3' of ↵Tom Rini2021-05-122-0/+211
|\ | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-ti - Initial support for AM64 EVM and SK - K3 DDR driver unification for J7 and AM64 platforms. - Minor fixes for TI clock driver
| * configs: am64x_evm_a53: Enable support for building multiple dtbsLokesh Vutla2021-05-121-0/+3
| | | | | | | | | | | | | | Enable all relevant configs for building multiple dtbs into a single fit image and load the right dtb for next stage. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * configs: am64x_evm_a53: Enable support for reading eepromLokesh Vutla2021-05-121-0/+4
| | | | | | | | | | | | | | Enable relevant configs for reading eeprom data and updating env variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * configs: am64x_evm_a53: Enable configs for printing cpuinfoLokesh Vutla2021-05-121-1/+2
| | | | | | | | | | | | Enable all relevant configs for printing CPU info. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * configs: am64x_evm_r5: Enable support for building multiple device treesLokesh Vutla2021-05-121-0/+3
| | | | | | | | | | | | | | Enable defconfigs for building multiple device trees into a single FIT image. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * configs: am64x_evm_r5: Enable checks for spl and stack sizesLokesh Vutla2021-05-121-0/+5
| | | | | | | | | | | | | | | | | | | | Enable relevant configs that checks for the size of image and stack: BSS: 4KB Initial MALLOC: 512KB Initial Stack: 8K SPL Image size can be: ~960KB Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * configs: am64x_evm_r5: Enable GPIO regulatorNishanth Menon2021-05-121-0/+8
| | | | | | | | | | | | | | Enable GPIO regulator. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
| * configs: am64x_evm_a53: Add Initial supportDave Gerlach2021-05-121-0/+96
| | | | | | | | | | | | Add initial A53 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
| * configs: am64x_evm_r5: Add Initial supportDave Gerlach2021-05-121-0/+91
| | | | | | | | | | | | Add initial R5 defconfig support for AM64x SoCs. Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
* | Merge tag 'u-boot-imx-20210502' of ↵Tom Rini2021-05-117-3/+532
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210502 ------------------- - mx6: fixes for Ventana - local fixes from maintainer - imx7d: Ronetix's iMX7-CM - imx8: Ronetix iMX8MQ-CM Engicam i.Core MX8M Compulab iot-gate-imx8 - Fixes i.MX8 documentation - Fixes phy usage with fec
| * | ARM:imx:imx8mq-cm: Add support for Ronetix iMX8MQ-CMIlko Iliev2021-05-021-0/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported peripherals: Ethernet, eMMC, Serial. U-Boot SPL 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) Normal Boot Trying to boot from MMC2 U-Boot 2021.04-00911-g5fa1e2ffeb-dirty (Apr 23 2021 - 09:11:14 +0200) CPU: Freescale i.MX8MQ rev2.1 at 1000 MHz Reset cause: POR Model: Ronetix iMX8M-CM SoM DRAM: 1 GiB WDT: Started with servicing (60s timeout) MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - 42:0d:e7:78:da:53 eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Signed-off-by: Ilko Iliev <iliev@ronetix.at>
| * | imx: Add support for Ronetix's iMX7-CM boardIlko Iliev2021-05-021-0/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Console boot log: U-Boot SPL 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) Trying to boot from MMC1 U-Boot 2021.04-00836-ga6232e065d-dirty (Apr 16 2021 - 15:16:35 +0200) CPU: Freescale i.MX7D rev1.3 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 44C Reset cause: POR Model: Ronetix iMX7-CM Board Board: iMX7-CM DRAM: 512 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 (eth0) using random MAC address - fe:be:37:01:5a:3f eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 Signed-off-by: Ilko Iliev <iliev@ronetix.at>
| * | arm: imx8m: add support for Compulab iot-gate-imx8 (imx8mm-cl-iot-gate)Ying-Chun Liu (PaulLiu)2021-05-021-0/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Compulab iot-gate-imx8 board (imx8mm-cl-iot-gate). The initial support includes: - MMC - eMMC - I2C - FEC - Serial console Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Signed-off-by: Valentin Raevsky <valentin@compulab.co.il> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Peter Robinson <pbrobinson@gmail.com>
| * | board: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0Jagan Teki2021-05-021-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier board. Genaral features: - Ethernet 10/100 - Wifi/BT - USB Type A/OTG - Audio Out - CAN - LVDS panel connector i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Carrier board for creating complete i.Core MX8M Mini C.TOUCH 2.0 board. Linux dts commit details: commit <a142252061ff> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini C.TOUCH 2.0") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | board: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter KitJagan Teki2021-05-021-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board. Genaral features: - LCD 7" C.Touch - microSD slot - Ethernet 1Gb - Wifi/BT - 2x LVDS Full HD interfaces - 3x USB 2.0 - 1x USB 3.0 - HDMI Out - Mini PCIe - MIPI CSI - 2x CAN - Audio Out i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. i.Core MX8M Mini needs to mount on top of this Evaluation board for creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit. Linux dts commit details: commit <051c08eea682> ("arm64: dts: imx8mm: Add Engicam i.Core MX8M Mini EDIMM2.2 Starter Kit") Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | configs: ge: use non-persistent environmentIan Ray2021-05-022-2/+2
| | | | | | | | | | | | | | | | | | | | | Disable the unused persistent environment. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
| * | configs: ge: bx50v3: adjust watchdog periodIan Ray2021-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Increase watchdog period, in order to accomodate recent kernel size and configuration changes. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
generated by cgit (git 2.34.1) at 2024-05-02 20:01:12 +0000