summaryrefslogtreecommitdiffstats
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* imx: add i.MX8MQ EVK supportPeng Fan2019-01-011-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to DRAM. The boot log with Arm trusted firmware console enabled: " U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) PMIC: PFUZE100 ID=0x10 Normal Boot Trying to boot from MMC2 NOTICE: Configureing TZASC380 NOTICE: BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty NOTICE: BL31: Built : 09:28:54, Nov 8 2018 lpddr4 swffc start NOTICE: sip svc init U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800) CPU: Freescale i.MX8MQ rev2.0 at 1000 MHz Reset cause: POR Model: Freescale i.MX8MQ EVK DRAM: 3 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: Warning: ethernet@30be0000 using MAC address from ROM eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 " Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* arm: imx7d: cl-som-imx7: migration to CONFIG_BLKYaniv Levinsky2019-01-011-1/+5
| | | | | | | Enable driver model for USB, MMC and REGULATOR drivers. Set run-time configuration via Device Tree. Signed-off-by: Yaniv Levinsky <yaniv.levinsky@compulab.co.il>
* embestmx6boards: Add SPL supportFabien Lahoudere2019-01-011-0/+48
| | | | | | | In order to boot faster with falcon mode, we need to add SPL support to riotboard. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
* configs: mx23_olinuxino_defconfig: disable bootefi commandMichael Heimpold2019-01-011-0/+1
| | | | | | | | | CONFIG_CMD_BOOTEFI is enabled by Kconfig default, but rarely used on this board/platform. So let's disable it for the boards default config. This also saves around 16 KiB in the final u-boot.sb. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* configs: mx23_olinuxino_defconfig: fix status led definitionMichael Heimpold2019-01-011-1/+1
| | | | | | | | | | | | | | | While migrating individual status led usages to Kconfig stuff, a (random) value was introduced for this board which does not work but produces the following error message during boot: __led_init: failed requesting GPIO59! Since Kconfig does not seem to accept a define as this point, but the mxs gpio driver requires not only a simple integer value, we need to use the plain value of MX23_PAD_SSP1_DETECT__GPIO_2_1. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Fixes: 2d8d190c8394 ("status_led: Kconfig migration")
* board: ge: Move VPD EEPROM configuration to the defconfigDenis Zalevskiy2018-12-172-0/+19
| | | | | | | | | Use standard configuration logic to define EEPROM constants. Names are based on VPD_EEPROM_ prefix because EEPROM_ is already used by i2c_eeprom driver. Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com> Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
* warp7: configs: add CONFIG_FIT optionPierre-Jean Texier2018-12-171-0/+2
| | | | | | This enable FIT image support. Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
* ARM: omap3_logic/omap35_logic: Move to DM_USBAdam Ford2018-12-124-36/+16
| | | | | | | | | The existing config is setup as a gadget but it doesn't use DM_USB. This patch converts all boards to DM_USB, but as host. As host, it is able to mount USB drives and browse them. Signed-off-by: Adam Ford <aford173@gmail.com>
* arm: am335x-pdu001: Move from embedded to separate DTBFelix Brack2018-12-121-1/+1
| | | | | | | There is no need for an embedded device tree for this board so let the build process generate a separate u-boot.dtb file instead. Signed-off-by: Felix Brack <fb@ltec.ch>
* spl: fix build failure with !CONFIG_SPL_PCI_SUPPORTSekhar Nori2018-12-122-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Building U-Boot with CONFIG_PCI and CONFIG_DM_PCI enabled, but CONFIG_SPL_PCI_SUPPORT disabled, results in following linker error: lib/built-in.o: In function `fdtdec_get_pci_bar32': lib/fdtdec.c:305: undefined reference to `dm_pci_read_bar32' fdtdec.c:305:(.text.fdtdec_get_pci_bar32+0x24): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `dm_pci_read_bar32' This is because reference to dm_pci_read_bar32() remains in lib/fdtdec.c while SPL build does not descend into drivers/pci directory in drivers/Makefile if CONFIG_SPL_PCI_SUPPORT is not enabled. Fix this by applying appropriate #define guards in lib/fdtdec.c. It looks like ns16550.c has the same problem, so fixed that too. To simplify this, CONFIG_SPL_PCI_SUPPORT is renamed to CONFIG_SPL_PCI (enables use of CONFIG_IS_ENABLED() macro). Suggested-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigsAndrew F. Davis2018-12-122-7/+14
| | | | | | | Sync new additions to non-HS defconfig with HS defconfig. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* blk: Rework guard around part_init callTom Rini2018-12-122-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The function part_init() will only be built when we have both CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE set. Protect the call to this function with both of these tests now. Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Stefan Roese <sr@denx.de> Cc: Marek Behún <marek.behun@nic.cz> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Adam Ford <aford173@gmail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* qemu-arm: Add persistent environment supportSumit Garg2018-12-122-0/+14
| | | | | | | | | | | | | | | | Currently on qemu-arm platforms environment is kept in RAM. Instead use pflash device 1 to provide persistent environment support across device reset. Also (optionally) provide support for persistent environment across qemu machine OFF/ON using following instructions: - Create envstore.img using qemu-img: qemu-img create -f raw envstore.img 64M - Add a pflash drive parameter to the command line: -drive if=pflash,format=raw,index=1,file=envstore.img Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
* Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2018-12-1028-5/+939
|\ | | | | | | | | | | | | | | Add TFA boot flow for some Layerscape platforms Add support for lx2160a SoC [trini: Add a bunch of missing MAINTAINERS entries] Signed-off-by: Tom Rini <trini@konsulko.com>
| * ls1088a: Move CONFIG_FSL_QSPI to defconfigAshish Kumar2018-12-067-0/+7
| | | | | | | | | | | | Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm64: ls2080a: enable DM support for sataPeng Ma2018-12-062-2/+6
| | | | | | | | | | | | | | | | | | Enable related configs to support sata DM feature. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> [YS: moveconfig -s -d] Reviewed-by: York Sun <york.sun@nxp.com>
| * arm64: ls1088a: enable DM support for sataPeng Ma2018-12-062-1/+6
| | | | | | | | | | | | | | | | | | Enable related configs to support sata DM feature. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> [YS: moveconfig.py -s -d] Reviewed-by: York Sun <york.sun@nxp.com>
| * arm64: ls1046aqds: enable DM support for sataPeng Ma2018-12-061-1/+3
| | | | | | | | | | | | | | | | Enable related configs to support sata DM feature. Signed-off-by: Peng Ma <peng.ma@nxp.com> [YS: moveconfig.py -s -d] Reviewed-by: York Sun <york.sun@nxp.com>
| * arm64: ls1046ardb: enable DM support for sataPeng Ma2018-12-061-1/+3
| | | | | | | | | | | | | | | | Enable related configs to support sata DM feature. Signed-off-by: Peng Ma <peng.ma@nxp.com> [YS: moveconfig.py -s -d] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012afrx: Add TFABOOT supportRajesh Bhagat2018-12-064-0/+204
| | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1012a2g5rdb/ls1012afrdm/ls1012afrwy_tfa_defconfig to be loaded by trusted firmware - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> [YS: remove unnecessary braces] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012aqds: Add TFABOOT supportRajesh Bhagat2018-12-062-0/+128
| | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1012aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012ardb: Add TFABOOT supportRajesh Bhagat2018-12-062-0/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1012ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - enable PFE validation for secure boot Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043aqds: Add TFABOOT supportRajesh Bhagat2018-12-062-0/+120
| | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1043aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043ardb: Add TFABOOT supportRajesh Bhagat2018-12-062-0/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1043ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - FMAN and QE address changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046aqds: Add TFABOOT supportRajesh Bhagat2018-12-062-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1046aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - FMAN address changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046ardb: Add TFABOOT supportRajesh Bhagat2018-12-062-0/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1046ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - FMAN address changes for TFABOOT - define BOOTCOMMAND for TFABOOT Signed-off-by: York Sun <york.sun@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* | Merge tag 'for-master-20181210' of git://git.denx.de/u-boot-rockchipTom Rini2018-12-101-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | Improvements: - init DRAM for RK322x in SPL - add FAN53555 PMIC/regulator driver - update MicroCrystal RV3029 driver to Kconfig and sync from Linux - add bootcount uclass and first DM-driver for bootcount
| * | rockchip: rk3399-puma: defconfig: enable FAN53555 regulator driverPhilipp Tomsich2018-12-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With a driver for the FAN53555 regulator family available, let's enable it for the RK3399-Q7 (which has two of these devices on-module). We enable this for the full U-Boot stage only, as these regulators provide a suitable default voltage and supply non-critical (i.e. for booting up) power rails only. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2018-12-106-1/+8
|\ \ \ | | | | | | | | | | | | | | | | - DM_I2C_COMPAT removal for all ti platforms from Jean-Jacques Hiblot - Fix in i2c command help output from Chirstoph Muellner.
| * | | dra7: Allow selecting a new dtb after board detection.Jean-Jacques Hiblot2018-12-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRA7 platforms requires that the dtb used in the SPL really matches the platform to have the best MMC performances. To detect the board type/version an I2C EEPROM is read. This requires that DM is initialized before the detection. As a consequence we must reset the DM after the board detection is a new dtb would better match the platform. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * | | configs: dra7xx-evm: increase the size of the malloc's pool before relocationJean-Jacques Hiblot2018-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is required to take advantage of MULTI_DTB_FIT before relocation. If it is too low, DM will be initialized only after relocation has taken place. That is too late for the DRA7 because I2C DM is used before the relocation to setup the voltages required, among other things, to properly initialize the DRAM. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * | | configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIASJean-Jacques Hiblot2018-12-105-0/+5
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Those platforms need CONFIG_SPL_DM_SEQ_ALIAS because they enable both DM_I2C and SPL_DM. Without CONFIG_SPL_DM_SEQ_ALIAS, it is not possible to get the I2C bus with i2c_get_chip_for_busnum(). Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Felix Brack <fb@ltec.ch> Tested-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2018-12-105-14/+31
|\ \ \ | |/ / |/| | | | | - DWC3 and UDC cleanup
| * | configs: am57xx_evm: Enable DM_USB and DM_USB_DEVJean-Jacques Hiblot2018-12-072-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | Enable DM_USB and DM_USB_DEV for AM57xx based boards. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | configs: enable DM_USB and DM_USB_DEV for all DRA7 platformsJean-Jacques Hiblot2018-12-072-8/+12
| | | | | | | | | | | | | | | Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | configs: evb-rk3328: Enable CONFIG_USB_DWC3Jean-Jacques Hiblot2018-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | This is now required because the PHY operations used by xhci-dwc3 are part of the dwc3 core. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* | | Merge git://git.denx.de/u-boot-marvellTom Rini2018-12-091-5/+8
|\ \ \ | | | | | | | | | | | | | | | | - Sync DDR training with Marvell code for Armada 38x by Chris - Misc updates to Armada 38x Helios4 board by Aditya
| * | | arm: mvebu: helios4: Enable SPI flash supportAditya Prayoga2018-12-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPI flash support under U-Boot and SPL. The ENV size and offset, ported from U-Boot 2013.01 Marvell version: 2015_T1.0p16 To create U-Boot image for SPI flash, user would need to replace * CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC with CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI * CONFIG_ENV_IS_IN_MMC with CONFIG_ENV_IS_IN_SPI_FLASH Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: helios4: Reduce U-Boot image sizeAditya Prayoga2018-12-081-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove unused I2C support in SPL and use simple_malloc functions to reduce SPL image size. Since Helios4 does not have any PCIe allocated on SerDes, remove PCI support. MTD layer on top of SPI flash is not needed, remove it also. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: helios4: Enable mvebu GPIOAditya Prayoga2018-12-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of U-Boot's GPIO DM to control native GPIO and I2C IO expander. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | arm: mvebu: helios4: Enable I2C and IO ExpanderAditya Prayoga2018-12-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable Marvell I2C driver and I2C IO expander. Set default bus to external I2C bus. Define I2C aliases in device tree so it can be recognized by the driver. Signed-off-by: Aditya Prayoga <aditya@kobol.io> Reviewed-by: Stefan Roese <sr@denx.de> Tested-By: Dennis Gilmore <dgilmore@redhat.com> Reviewed-By: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2018-12-072-0/+4
|\ \ \ \ | |/ / / |/| | | | | | | | | | | - Various axp209 fixes - Fixes for OLinuXino-A20-Lime2 / OLinuXino-A20-Lime2-eMMC
| * | | arm: sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime2-eMMCPriit Laes2018-12-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lime2 features a too large capacitor on the LDO3 output, which causes the PMIC to shutdown when enabling power. To be able to still boot up however, we must gradually enable power on LDO3 for this board. We do this by enabling both the inrush quirk and the maximum slope the AXP209 supports. Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
| * | | arm: sunxi: Reduce inrush current on Olimex OLinuXino-A20-Lime2Olliver Schinagl2018-12-071-0/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lime2 features a too large capacitor on the LDO3 output, which causes the PMIC to shutdown when enabling power. To be able to still boot up however, we must gradually enable power on LDO3 for this board. We do this by enabling both the inrush quirk and the maximum slope the AXP209 supports. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
* | | serial: bcm6858: remove driver and switch to bcm6345Álvaro Fernández Rojas2018-12-071-1/+1
| | | | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* | | arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMCFelix Brack2018-12-071-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables CONFIG_BLK as well as CONFIG_DM_MMC for the PDU001 board. It depends on Patrice Chotard's patch 'power: regulator: denied disable on always-on regulator' which prevents power cycling the vmmc supply. Without this patch the board will not boot as vmmc is unfortunately used by other board components, not just eMMC and micro SD card. Furthermore my patch 'dts: am335x-pdu001: Fix polarity of card detection input' is required to boot from external micro SD card. Without this patch no SD card will be detected and hence booting will fail. Signed-off-by: Felix Brack <fb@ltec.ch> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | test: dma: add dma-uclass testGrygorii Strashko2018-12-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a sandbox DMA driver implementation (provider) and corresponding DM test. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
* | | configs: am335x_hs_evm_uart: Add YMODEM SPL support for UART bootAndrew F. Davis2018-12-071-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | UART booting requires YMODEM support. Add this here. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | hwspinlock: add stm32 hardware spinlock supportBenjamin Gaignard2018-12-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Implement hardware spinlock support for STM32MP1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* | | dm: Add Hardware Spinlock classBenjamin Gaignard2018-12-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is uclass for Hardware Spinlocks. It implements two mandatory operations: lock and unlock and one optional relax operation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit (git 2.34.1) at 2024-10-06 03:30:33 +0000