summaryrefslogtreecommitdiffstats
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'u-boot-amlogic-20181126' of git://git.denx.de/u-boot-amlogicTom Rini2018-11-297-7/+38
|\ | | | | | | | | | | | | Cleanup and update towards support for Amlogic Meson AXG SoCs : - mmc: meson-gx: Add AXG compatible - net: designware: add meson meson compatibles - Amlogic Meson cleanup for AXG SoC support
| * board: amlogic: add support for S400 boardNeil Armstrong2018-11-261-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The S400 board is the Amlogic AXG SoC reference board including : - Amlogic A113DX ARM Cortex-A53 quad-core SoC @ 1.2GHz - 1GB DDR4 SDRAM - 10/100 Ethernet - 2 x USB 2.0 Host - eMMC - Infrared receiver - SDIO WiFi Module - MIPI DSI Connector - Audio HAT Connector - PCI-E M.2 Connectors Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * ARM: rework amlogic configurationJerome Brunet2018-11-266-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Rework the board SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME setup by moving the board Kconfig into the mach-meson Kconfig to make it easier to add new boards for a SoC architecture and add a custom config header or custom board handler for a platform. This drops the board CONFIGs and the duplicate boards configs headers in favor of a single meson64.h config header. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * board: amlogic: factorise gxbb boardsJerome Brunet2018-11-261-1/+1
| | | | | | | | | | | | | | | | | | | | The nanopi-k2 and the odroid-c2 are similar enough to be supported by the same u-boot board. This change use odroid-c2 u-boot board for the nanopi-k2 as well. Dedicated defconfig are kept to customize the names and device tree. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * board: amlogic: move khadas-vim2 as q200 ref boardNeil Armstrong2018-11-261-1/+1
| | | | | | | | | | | | | | | | | | The Khadas vim2 derive from amlogic s912 reference design (Q200). This patch moves the khadas-vim2 board support to a generic Q200 board, while keeping a dedicated defconfig to customize the names and device tree. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * board: amlogic: remove p212 derivativesJerome Brunet2018-11-262-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The Khadas vim and the libretech aml-s905x-cc (aka Potato) derive from amlogic s905x reference design (P212). All the code in these board is a copy/paste from the p212, which is tedious to maintain. This change use p212 u-boot board for all these boards, while keeping a dedicated defconfig to customize the names and device tree. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | arm: MediaTek: add basic support for MT7623 boardsWeijie Gao2018-11-281-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | This adds a general board file based on MT7623 SoCs from MediaTek. As this u-boot is loaded by MTK proprietary preloader, there is no low level initializtion codes. Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | arm: MediaTek: add basic support for MT7629 boardsRyder Lee2018-11-281-0/+73
| | | | | | | | | | | | | | | | | | | | | | This adds a general board file based on MT7629 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2018-11-271-1/+2
|\ \ | | | | | | | | | - Introduce CONFIG_SPL_DM_USB
| * | usb: am335x_evm: Disable CONFIG_SPL_DM_USBSven Schwermer2018-11-261-1/+2
| | | | | | | | | | | | | | | | | | | | | This configuration doesn't use USB in the SPL, so we need to disable driver model for USB in the SPL. Signed-off-by: Sven Schwermer <sven@svenschwermer.de>
* | | ARM: chiliboard: move towards driver model and device-tree bootMarcin Niestroj2018-11-261-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch mostly enables DM drivers in board defconfig and all their dependencies. Additionally we remove ethernet platform data, as all details are in device-tree now. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: vexpress_*_defconfig: Enable CMD_UBI supportOtavio Salvador2018-11-266-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allow for convenient use of QEMU machine to test loading of UBI filesystem. There are a couple of changes made together of this which are required: 1) The malloc must be at least 512 KiB to allow the use of UBI filesystem. We are going to enable it in a next patch. 2) MTD_DEVICE must be enabled, otherwise we get missing symbols during the build Following configs were change: - vexpress_aemv8a_dram_defconfig - vexpress_aemv8a_juno_defconfig - vexpress_aemv8a_semi_defconfig - vexpress_ca15_tc2_defconfig - vexpress_ca5x2_defconfig - vexpress_ca9x4_defconfig Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Liviu Dudau <liviu.dudau@arm.com>
* | | Merge git://git.denx.de/u-boot-riscvTom Rini2018-11-264-5/+47
|\ \ \ | |/ / |/| |
| * | configs: ax25-ae350: Separate ax25-ae350 for RV32/64I.Rick Chen2018-11-262-1/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | Separate ax25-ae350 from one to two for 32 and 64 bit individually. And also select different dts for 32 and 64 bit. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com>
| * | riscv: qemu: enable distro bootLukas Auer2018-11-262-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable distro boot on the qemu-riscv32/64 boards. Supported boot target devices are VirtIO and DHCP. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alexander Graf <agraf@suse.de>
| * | riscv: qemu: support booting LinuxLukas Auer2018-11-262-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support booting Linux (as payload of BBL) from FIT images. For this, the default CONFIG_SYS_BOOTM_LEN is increased to 16 MB, and the environment variables fdt_high and initrd_high are set to mark the device tree and initrd as in-place. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | riscv: qemu: use device tree passed by prior boot stageLukas Auer2018-11-262-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QEMU provides a device tree, which is passed to U-Boot using register a1. We are now able to directly select the device tree with the configuration CONFIG_OF_PRIOR_STAGE. Replace the hard-coded address in qemu-riscv with it. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
| * | riscv: rename CPU_RISCV_32/64 to match architecture names ARCH_RV32I/64ILukas Auer2018-11-262-2/+2
| |/ | | | | | | | | | | | | | | | | | | RISC-V defines the base integer instruction sets as RV32I and RV64I. Rename CPU_RISCV_32 and CPU_RISCV_64 to ARCH_RV32I and ARCH_RV64I to match this convention. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
* / spl: Add support for passing handoff info to U-Boot properSimon Glass2018-11-261-0/+1
|/ | | | | | | | | | | | | There is some basic informaton that SPL normally wants to pass through to U-Boot, such as the SDRAM size and bank information. Mkae use of the new bloblist structure for this. Add a new 'handoff' blob which is set up in SPL and passed to U-Boot proper. Also adda test for sandbox_spl that checks that this works correctly and a new 'sb' command to show the information passed from SPL. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: mvebu: dts: add Clearfog GT-8KRabeeh Khoury2018-11-201-0/+75
| | | | | | | | | | | | | | The SolidRun Clearfog GT-8K is based on Armada 8040. https://wiki.solid-run.com/doku.php?id=products:a8040:clearfoggt8k The config file is identical to the Macchiatobin one (mvebu_mcbin-88f8040_defconfig) with only the default device-tree changed. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
* mips: mt76xx: linkit-smart-7688: Misc updates to dts/config/defconfigStefan Roese2018-11-182-14/+30
| | | | | | | | | | | | | | | | | | | | These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI support - Enable GPIO support - Change max image size from 0x40000 to 0x80000 A note about the baudrate change: The original Mediatek U-Boot version used 57600 baud. Lets move to a more common and faster speed of 115200 baud. And remove the "console=" property from the DT as its not needed. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* mips: mt76xx: gardena-smart-gateway: Misc updates to dts/config/defconfigStefan Roese2018-11-182-16/+56
| | | | | | | | | | | | | | | | | | | | These misc updates include the following changes: - Change baudrate from 57600 to 115200 - Enable MIPS_BOOT_CMDLINE_LEGACY - Enable FIT support - Enable ethernet support - Enable SPI NOR and NAND support - Change MTD_UBI_BEB_LIMIT to 22 - Enable MTD Support - Enable GPIO support - Enable watchdog support - Enable bootcounter support - Enable version variable - Change max image size from 0x80000 to 0xa0000 - Change SYS_MALLOC_LEN to 16MiB (because of UBI/UBIFS) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* configs: am65x_evm_r5: Add initial supportLokesh Vutla2018-11-161-0/+87
| | | | | | | | | | Add initial defconfig support for AM65x that runs on R5. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com>
* ARM: am3517_evm: Remove SPL_OF_CONTROL and OF_PLATDATAAdam Ford2018-11-161-2/+0
| | | | | | | After the recomendation, some testing shows like these are unnecessary. Suggested-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: omap3_logic: Remove SPL_OF_CONTROL and OF_PLATDATAAdam Ford2018-11-164-8/+0
| | | | | | | After the recomendation, some testing shows like these are unnecessary. Suggested-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: omap3_logic: Make CONFIG_SYS_TEXT_BASE match README.omap3Adam Ford2018-11-164-0/+4
| | | | | | | | | README.omap3 has two options. For option 1, CONFIG_SYS_TEXT_BASE is set to 0x80100000. Option 2 lists 0x80008000. The existing value is neither of these, so this patch makes it equivalent to Option 1. Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: am3517_evm: Build for ThumbAdam Ford2018-11-161-1/+0
| | | | | | | | | | | | | | | | | | | | | | | In an effort to free up more resources in SPL and U-Boot, building for Thumb shrinks the code side. Before: text data bss dec hex filename 685588 25808 275724 987120 f0ff0 u-boot text data bss dec hex filename 55324 417 67460 123201 1e141 spl/u-boot-spl After: text data bss dec hex filename 515502 25808 275708 817018 c777a u-boot text data bss dec hex filename 42910 417 67460 110787 1b0c3 spl/u-boot-spl Signed-off-by: Adam Ford <aford173@gmail.com>
* bcm968580xref: add initial supportPhilippe Reynes2018-11-161-0/+36
| | | | | | | | | | This add the initial support of the broadcom reference board bcm968580xref with a bcm6858 SoC. This board has 512 MB of ram, 256 MB of flash (nand), 2 usb port, 1 uart, 4 ethernet ports (LAN), 1 ethernet port (WAN). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
* arm: at91: wdt: Convert watchdog driver to dm/dtPrasanthi Chellakumar2018-11-163-0/+10
| | | | | | | | Convert the Watchdog driver for AT91SAM9x processors to support the driver model and device tree. Changes "CONFIG_AT91SAM9_WATCHDOG" to new "CONFIG_WDT_AT91" Kconfig option. Signed-off-by: Prasanthi Chellakumar <prasanthi.chellakumar@microchip.com>
* configs: Enable THUMB2 on various ARM boardsTom Rini2018-11-164-0/+4
| | | | | | | | The clearfog, corvus, wb45n and picosam9g45 configs are close to exceeding their size limits, so enable THUMB2 builds on them to reclaim space. Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge tag 'pull-14nov18' of git://git.denx.de/u-boot-dmTom Rini2018-11-164-3/+1
|\ | | | | | | | | | | | | - virtio implementation and supporting patches - DM_FLAG_PRE_RELOC fixes - regmap improvements - minor buildman and sandbox things
| * Revert "imx8qxp_mek: Disable CONFIG_DISPLAY_CPUINFO"Bin Meng2018-11-141-1/+0
| | | | | | | | | | | | | | | | | | | | This reverts commit c5bbfaf05dc8592b479a44df6abaadbab54fec2b. Disabling CONFIG_DISPLAY_CPUINFO was a temporary solution to get the v2018.11 release out. Now the merge window opens, revert it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * test: dm: virtio: Add test cases for virtio uclassBin Meng2018-11-141-0/+1
| | | | | | | | | | | | | | | | Now that we have a sandbox virtio transport driver, add some test cases to test virtio uclass driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * arm: qemu: Add a Kconfig in the board directoryBin Meng2018-11-142-2/+0
| | | | | | | | | | | | | | | | This adds a Kconfig file in the board directory, so that some board-specific options can be specified there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2018-11-144-0/+66
|\ \ | |/ |/|
| * board: allwinner: sun50i-h6: Add Orangepi Lite2 supportJagan Teki2018-11-131-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OrangePi Lite2 is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - AP6356S Wifi/BT - USB 2.0, USB 3.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
| * sunxi: DT: add support for PinebookVasily Khoruzhick2018-11-131-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | Pinebook is a laptop produced by Pine64, with USB-connected keyboard, USB-connected touchpad and an eDP LCD panel connected via a RGB-eDP bridge from Analogix. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: A64: Add Pine64-LTS boardAndre Przywara2018-11-131-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | The Pine64 LTS is an updated version of the Pine64, copying the technical updates from the SoPine platform: LPDDR3 DRAM, eMMC socket and soldered SPI flash chip, even the broken SD card detect pin has been copied. Consequently this leads to the .dts (copied from the kernel) just including the SoPine baseboard .dts, and the defconfig being almost identical. Nevertheless the boards deserves a separate config. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: add support for Banana Pi M2 Zero boardJun Nie2018-10-311-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | Banana Pi M2 Zero is a board by Sinovoip with Allwinner H2+ SoC, 16-bit 512MiB DDR3 memory, a MicroSD slot, two MicroUSB ports (one OTG and one powering-only) and a miniHDMI port. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Jun Nie <jun.nie@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> [jagan: Fixed board MAINTAINERS file] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | Merge branch 'next'Tom Rini2018-11-149-0/+16
|\ \ | | | | | | | | | This brings in the u-boot-net PR from Joe.
| * | configs: net: convert DRIVER_TI_KEYSTONE_NET kconfigGrygorii Strashko2018-11-058-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Convert DRIVER_TI_KEYSTONE_NET to Kconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
| * | net: ftgmac100: Add support for the Aspeed SoCCédric Le Goater2018-11-051-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Faraday ftgmac100 MAC controllers as found on the Aspeed SoCs have some slight differences in the HW interface (End-Of-Rx/Tx-Ring bits). Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | configs: Migrate and re-enabled CONFIG_CMD_MTDPARTSTom Rini2018-11-14275-162/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
* | | configs: Resync with savedefconfigTom Rini2018-11-13138-233/+117
| | | | | | | | | | | | | | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* | | board: toradex: colibri_vf: drop SPI supportMarcel Ziswiler2018-11-121-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Drop SPI support saving precious 4 Kb on boards with tough size restrictions. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* | | board: toradex: colibri_vf: unset CONFIG_CMDLINE_EDITINGMarcel Ziswiler2018-11-121-0/+1
| | | | | | | | | | | | | | | | | | | | | Unset CONFIG_CMDLINE_EDITING saving precious 4 Kb on boards with tough size restrictions. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
* | | board: toradex: colibri_vf: efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATIONMarcel Ziswiler2018-11-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unset CONFIG_EFI_UNICODE_CAPITALIZATION on boards with tough size restrictions. This is analogous to commit a90bf07afc43 ("efi_loader: unset CONFIG_EFI_UNICODE_CAPITALIZATION"). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Alexander Graf <agraf@suse.de>
* | | imx8qxp_mek: Disable CONFIG_DISPLAY_CPUINFOBin Meng2018-11-071-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | Due to revert of commit c0434407b595, this board does not build any more. Disable CONFIG_DISPLAY_CPUINFO for v2018.11 release. This commit should be reverted after v2018.11 release. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge tag 'arc-for-2018.11' of git://git.denx.de/u-boot-arcTom Rini2018-11-021-3/+3
|\ \ | | | | | | | | | | | | | | | | | | Just 2 non-functinal changes: 1. Rename of EMDK to EMSDP so it matches real marketing name 2. Add essential README for IoTDK
| * | emdk->emsdp: Rename boardAlexey Brodkin2018-11-011-3/+3
| |/ | | | | | | | | | | | | | | Real marketing name of the board was recently updated so to accommodate that change renaming the board and all related to it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
generated by cgit (git 2.34.1) at 2024-11-20 11:22:31 +0000