summaryrefslogtreecommitdiffstats
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* qemu-arm64: Enable POSITION_INDEPENDENTAndre Przywara2020-10-081-0/+1
| | | | | | | | | | | | | Now that PIE works when U-Boot is started from ROM, let's enable CONFIG_POSITION_INDEPENDENT, which allows to load U-Boot also via ARM Trusted-Firmware's fip.bin to DRAM, without tweaking the configuration. To get a writable initial stack, we need to keep the fixed initial stack pointer, which points to DRAM in our case. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* mips: octeon: octeon_ebb7304_defconfig: Enable USB supportStefan Roese2020-10-071-0/+17
| | | | | | | This patch enables USB support with some helpful commands, like fs support. Signed-off-by: Stefan Roese <sr@denx.de>
* mips: octeon: octeon_ebb7304: Add DDR4 supportStefan Roese2020-10-071-0/+3
| | | | | | | | | | | This patch adds the board specific configuration (struct) for the Octeon 3 EBB7304 EVK. This struct is ported from the 2013er Cavium / Marvell U-Boot repository. Also, the Octeon RAM driver is enabled in the board defconfig for its usage. Tested with one and two DIMMs on the EBB7304 EVK (8 & 16 GiB). Signed-off-by: Stefan Roese <sr@denx.de>
* Merge tag 'efi-2021-01-rc1' of ↵Tom Rini2020-10-061-1/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2021-01-rc1 The following bugs in the UEFI system are resolved: * illegal free in EFI_LOAD_FILE2_PROTOCOL implementation * incorrect documentation of EFI_LOAD_FILE2_PROTOCOL implementation * output of CRC32 as decimal instead hexadecimal in unit test * use EfiReservedMemoryType for no-map reserved memory * avoid unnecessary resets in UEFI unit tests * call EFI bootmgr even without having /EFI/boot
| * efi_loader: QEMU CONFIG_EFI_GRUB_ARM32_WORKAROUND=nHeinrich Schuchardt2020-10-061-1/+0
| | | | | | | | | | | | | | | | | | | | CONFIG_EFI_GRUB_ARM32 is only needed for architectures with caches that are not managed via CP15 (or for some outdated buggy versions of GRUB). It makes more sense to disable the setting per architecture than per defconfig. Move QEMU's CONFIG_EFI_GRUB_ARM32_WORKAROUND=n from defconfig to Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | Merge tag 'u-boot-amlogic-20201005' of ↵Tom Rini2020-10-0610-9/+30
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - generate unique mac address from SoC serial on S400 board - Add USB support for GXL and AXG SoCs - Update Gadget code to use the new GXL and AXG USB glue driver - Add a VIM3 board support to add dynamic PCIe enable in OS DT - Fix AXG pinmux with requesting GPIOs - Add missing GPIOA_18 for AXG pinctrl - Add Amlogic PWM driver
| * board: amlogic: vim3: add support for dynamic PCIe enableNeil Armstrong2020-10-052-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between an USB3.0 Type A connector and a M.2 Key M slot. The PHY driving these differential lines is shared between the USB3.0 controller and the PCIe Controller, thus only a single controller can use it. This adds this dynamic switching right before booting Linux and the configuration steps in the boards documentation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> [narmstrong: fixed warning by replacing min() by min_t()]
| * configs: vim3: use the vim3 board supportNeil Armstrong2020-10-052-2/+2
| | | | | | | | | | | | | | | | | | Use the newly added VIM3 board support instead of the generic W400. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * configs: s400: enable USBNeil Armstrong2020-10-051-0/+15
| | | | | | | | | | | | Enable USB Host & Gadget on the Amlogic S400 board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * ARM: mach-meson: use new DWC3 glue for GXL & GXMNeil Armstrong2020-10-057-7/+7
| | | | | | | | | | | | | | Use the new Amlogic GXL/GXM USB Glue instead of the set of USB3 PHY and Simple DWC3 wrapper. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | configs: Resync with savedefconfigTom Rini2020-10-0580-439/+290
| | | | | | | | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'next'Tom Rini2020-10-05164-3413/+564
|\ \ | |/ |/| | | | | | | | | Bring in the assorted changes that have been staged in the 'next' branch prior to release. Signed-off-by: Tom Rini <trini@konsulko.com>
| * Merge branch 'next' of git://git.denx.de/u-boot-sh into nextTom Rini2020-10-017-0/+66
| |\
| | * board: renesas: remove empty board_early_init_f functionBiju Das2020-09-262-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Remove empty board_early_init_f function, since it is disabled in ebisu and condor board configs. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
| | * arm: rmobile: Use imply for BOARD_EARLY_INIT_FBiju Das2020-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use "imply" instead of "select" for BOARD_EARLY_INIT_F config option, and then disable it on boards which don't need it. Updated grpeach_defconfig to disable CONFIG_BOARD_EARLY_INIT_F option for RZA1. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
| | * ARM: rmobile: Enable dfu tftp on Gen3Marek Vasut2020-09-265-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | Enable the fitImage update options on RCar Gen3 boards. This permits easy update of multiple bootloader components. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * ARM: rmobile: Enable RPC on Salvator-X, ULCB, EbisuMarek Vasut2020-09-263-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the RPC Hyperflash driver on R8A7795,R8A7796,R8A77965 Salvator-X,ULCB and R8A77990 Ebisu. Note that to make the HF accessible, mainline ATF is mandatory and must be built with RCAR_RPC_HYPERFLASH_LOCKED=0 . Note that this is intended for development and testing convenience only and must be disabled in deployment for platform security reasons. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | Merge branch '2020-09-30-assorted-network-improvements' into nextTom Rini2020-10-011-0/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | - Generic UDP framework - TFTP fixes - dwc_eth_qos, smc911x, smc911x and mscc phy fixes
| | * | sandbox: enable support of generic udp protocolPhilippe Reynes2020-09-301-0/+1
| | |/ | | | | | | | | | | | | | | | | | | This commit enable the support of the generic udp protocol. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | firmware: smci: sandbox test for SCMI reset controllersEtienne Carriere2020-09-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add tests for SCMI reset controllers. A test device driver sandbox-scmi_devices.c is used to get reset resources, allowing further resets manipulation. Change sandbox-smci_agent to emulate 1 reset controller exposed through an agent. Add DM test scmi_resets to test this reset controller. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | firmware: scmi: sandbox test for SCMI clocksEtienne Carriere2020-09-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add tests for SCMI clocks. A test device driver sandbox-scmi_devices.c is used to get clock resources, allowing further clock manipulation. Change sandbox-smci_agent to emulate 3 clocks exposed through 2 agents. Add DM test scmi_clocks to test these 3 clocks. Update DM test sandbox_scmi_agent with load/remove test sequences factorized by {load|remove}_sandbox_scmi_test_devices() helper functions. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | firmware: add SCMI agent uclassEtienne Carriere2020-09-301-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change introduces SCMI agent uclass to interact with a firmware using the SCMI protocols [1]. SCMI agent uclass currently supports a single method to request processing of the SCMI message by an identified server. A SCMI message is made of a byte payload associated to a protocol ID and a message ID, all defined by the SCMI specification [1]. On return from process_msg() method, the caller gets the service response. SCMI agent uclass defines a post bind generic sequence for all devices. The sequence binds all the SCMI protocols listed in the FDT for that SCMI agent device. Currently none, but later change will introduce protocols. This change implements a simple sandbox device for the SCMI agent uclass. The sandbox nicely answers SCMI_NOT_SUPPORTED to SCMI messages. To prepare for further test support, the sandbox exposes a architecture function for test application to read the sandbox emulated devices state. Currently supports 2 SCMI agents, identified by an ID in the FDT device name. The simplistic DM test does nothing yet. SCMI agent uclass is designed for platforms that embed a SCMI server in a firmware hosted somewhere, for example in a companion co-processor or in the secure world of the executing processor. SCMI protocols allow an SCMI agent to discover and access external resources as clock, reset controllers and more. SCMI agent and server communicate following the SCMI specification [1]. This SCMI agent implementation complies with the DT bindings defined in the Linux kernel source tree regarding SCMI agent description since v5.8. Links: [1] https://developer.arm.com/architectures/system-architectures/software-standards/scmi Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 ↵Tom Rini2020-09-252-3/+12
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into next - Enhance the 'zboot' command to be more like 'bootm' with sub-commands - The last series of ACPI core changes for programmatic generation of ACPI tables - Add all required ACPI tables for ApolloLake and enable ACPIGEN on Chromebook Coral - A feature minor enhancements to the 'hob' command - Intel edison: Support for writing an xFSTK image via binman
| | * x86: coral: Update config and device tree for ACPISimon Glass2020-09-251-2/+9
| | | | | | | | | | | | | | | | | | | | | Enable new features and provide require device-tree config so that U-Boot produces the correct ACPI tables on Coral. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * x86: apl: Generate CPU tablesSimon Glass2020-09-251-0/+1
| | | | | | | | | | | | | | | | | | Add ACPI generation to the APL CPU driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * x86: acpi: Add a common routine to write WiFi infoSimon Glass2020-09-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Intel WiFi chips can use a common routine to write the information needed by linux. Add an implementation of this. Enable it for coral. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * x86: link: Allow more space for U-BootSimon Glass2020-09-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The extra ACPI code increases U-Boot above it current size limit. Move the start earlier to provide space. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | Merge tag 'xilinx-for-v2021.01' of ↵Tom Rini2020-09-2411-12/+22
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2021.01 arm64: - Support for bigger U-Boot images compiled with PIE microblaze: - Extend support for LE/BE systems zynqmp: - Refactor silicon ID detection code with using firmware interface - Add support for saving variables based on bootmode zynqmp-r5: - Fix MPU mapping and defconfig setting. xilinx: - Minor driver changes: names alignment - Enable UBIFS - Minor DT and macros fixes - Fix boot with appended DT - Fix distro boot cmd: - pxe: Add fixing for platforms with manual relocation support clk: - fixed_rate: Add DM flag to support early boot on r5 fpga: - zynqmppl: Use only firmware interface and enable SPL build serial: - uartlite: Enable for ARM systems and support endians mmc: - zynq: Fix indentation net: - gem: Support for multiple phys - emac: Fix 64bit support and enable it for arm64 kconfig: - Setup default values for Xilinx platforms - Fix dependecies for Xilinx drivers - Source board Kconfig only when platform is enabled - Fix FPGA Kconfig entry with SPL - Change some defconfig values bindings: - Add binding doc for vsc8531
| | * xilinx: zynqmp-r5: Increase amount of MALLOC spaceMichal Simek2020-09-231-0/+1
| | | | | | | | | | | | | | | | | | There is not enough space for early allocation. That's why increase it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * xilinx: r5: Disable EFI loaderMichal Simek2020-09-231-0/+1
| | | | | | | | | | | | | | | | | | | | | Xilinx ZynqMP R5 configuration is quite minimal and there is no reason to enable EFI for it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * xilinx: Disable CONFIG_EFI_LOADER_BOUNCE_BUFFER for ZynqMP/VersalMichal Simek2020-09-232-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both SOCs shouldn't have any problem with 64bit dma accesses. Also with PIE enabled when u-boot is placed above 4GB without any memory mapped below 4GB address space efi_memory_init() call is failing due to missing memory node. For this two reason disable this option for ZynqMP and Versal. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * fpga: kconfig: Rename SPL_FPGA_SUPPORT to SPL_FPGAMichal Simek2020-09-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch does sed 's/SPL_FPGA_SUPPORT/SPL_FPGA/g' but also fixing Makefile and zynqmp.c to simplify if/endif logic in zynqmp.c. This change is mostly done to be able to use CONFIG_IS_ENABLED macro and obj-$(CONFIG_$(SPL_)FPGA) in Makefile. For them symbols need to be in sync. And removing one line from Topic Miami boards which is not needed because symbol is not enabled via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| | * ARM: zynqmp: Fix SPL_DM_SPI dependenciesMichal Simek2020-09-235-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing dependencies for DM_SPI_FLASH. Kconfig reports it as: WARNING: unmet direct dependencies detected for SPL_DM_SPI_FLASH Depends on [n]: SPL [=n] && SPL_DM [=n] Selected by [y]: - ARCH_ZYNQMP [=y] && <choice> && SPL_DM_SPI [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * arm64: versal: Generate position-independent pre-relocation codeMichal Simek2020-09-231-0/+1
| | | | | | | | | | | | | | | | | | | | | Enable position independent pre-relocation to let users options to put u-boot to different locations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * xilinx: zynqmp: Add support for saving variablesMichal Simek2020-09-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling saving variables to MMC(FAT), NAND, SPI based on primary bootmode. Maybe that logic can be tuned for more complicated use cases and better tested for different bootmodes. Tested on zcu104 to SD(FAT) and JTAG(NOWHERE). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * xilinx: versal: Enable AXI ethernet driverAshok Reddy Soma2020-09-232-2/+2
| | | | | | | | | | | | | | | | | | | | | Enable AXI ethernet driver for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * nand: Kconfig: Change dependency for NAND_ARASANMichal Simek2020-09-233-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NAND_ARASAN selecting DM_MTD uunconditionally. Driver can be enabled with !DM that's why Kconfig it showing it as error: WARNING: unmet direct dependencies detected for DM_MTD Depends on [n]: DM [=n] Selected by [y]: - NAND_ARASAN [=y] && MTD_RAW_NAND [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| | * xilinx: Enable uartlite driver for Versal/ZynqMPT Karthik Reddy2020-09-232-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add CONFIG_XILINX_UARTLITE config to versal/zynqmp defconfig to enable uartlite driver support by default. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * configs: xilinx: Enable configs required for ubifsAshok Reddy Soma2020-09-232-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable required configs for using ubifs in uboot. UBIFS testing procedure from u-boot: Let's say we have two partitions in dt as below and want to format partition1 "images" with ubifs. partition@0 { label = "boot"; reg = <0x0 0x1000000>; }; partition@1 { label = "images"; reg = <0x1000000 0x7000000>; }; We will format the partition from linux and copy some files and access from uboot later. First thing, in linux config disable CONFIG_MTD_SPI_NOR_USE_4K_SECTORS. this is required as ubifs expects min LEB size as 15*1024 bytes. Use below commands in linux to format "images" partition with ubifs. ubiformat /dev/mtd1 ubiattach /dev/ubi_ctrl -m 1 ubimkvol /dev/ubi0 -N images -m mount -t ubifs ubi0:images /mnt We can copy files to /mnt and unmount it. To access this ubifs partition from uboot, run below commands. (Don't forget to probe device before, e.g. sf probe 0 0 0) setenv mtdids "nor0=nor0" setenv mtdparts "mtdparts=nor0:16m(boot),112m(images)" ubi part images ubifsmount ubi0:images make sure we match "mtdparts" to whatever is given in dt w.r.t partition sizes. "mtdparts" command will list the mtd partitions in u-boot. Once ubifs is mounted, we can use "ubifsls" to list the files in that partition and use "ubifsload <addr> <filename>" to load files from ubifs partition to DDR. Reading information about mtd layout from DT is not supported. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * xilinx: kconfig: Move sourcing of board Kconfig to mach foldersMichal Simek2020-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | Do not source xilinx board Kconfig by other boards. These configs should be available only when Xilinx platforms are selected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | configs: powerpc: add usb (host) mass storage supportRan Wang2020-09-2448-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 0cfccb54014b ("configs: Resync with savedefconfig") removed CONFIG_USB_STORAGE from some powerpc platforms' defconfig files, whicih would block the use case of system loading rootfs from USB drives, add them back. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | configs: Remove P5040DS secure boot configsPriyanka Jain2020-09-242-123/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P5040DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board/freescale: Remove P5020DS board supportPriyanka Jain2020-09-247-410/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P5020DS board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | powerpc:Remove P4080DS secure boot configsPriyanka Jain2020-09-241-59/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P4080DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | configs: Remove P3041DS secure boot configsPriyanka Jain2020-09-242-122/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P3041DS secure boot configs as they are no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board/freescale: Remove P1024RDB board supportPriyanka Jain2020-09-245-348/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P1024RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board/freescale: Remove P1021RDB board supportPriyanka Jain2020-09-248-630/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P1021RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board/freescale: Remove P1020MBG board supportPriyanka Jain2020-09-244-248/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P1020MBG board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board/freescale: Remove P1020UTM board supportPriyanka Jain2020-09-244-248/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P1020UTM board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | board/freescale: Remove P1025RDB board supportPriyanka Jain2020-09-245-360/+0
| | | | | | | | | | | | | | | | | | | | | Remove NXP powerpc P1025RDB board support as it is no longer maintained. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-10 12:35:55 +0000